UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

Registrant’s telephone number, including area code: 574-523-3800

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

The aggregate market value of the voting and non-voting stock held by non-affiliates of CTS Corporation, based upon the closing sales price of CTS common stock on July 2, 2010,1, 2011, was approximately $310$334 million. There were 34,323,94234,198,889 shares of common stock, without par value, outstanding on February 18, 2011.

Our 15 largest customers represented 48%, 51%, and 53% of net sales in 2011 and 2010 2009, and 2008, respectively. Sales to Hewlett-Packard Company amounted to less51% of net sales in 2009. No single customer represented more than 10% of net sales in 2011, 2010 and 2009, and 11% of net sales in 2008.

The Company continues to broaden its customer base. Changes in the level of our customers’ orders have, in the past, had a significant impact on our operating results. If a major customer reduces the amount of business it does with us, or substantially changes the terms of that business, there could be an adverse impact on our operating results.

Additionally, we expect to continue to depend on sales to our major customers. Because our customers are under no obligation to continue to do business with us on a long-term basis, there is always the possibility that one or more customers may choose to work with a competitor and reduce their business with us. Customers may also reduce or delay their business with us because of economic or other conditions or decisions that reduce their need for our products or services. Since it is difficult to replace lost business on a timely basis, it is likely that our operating results would be adversely affected if one or more of our major customers were to cancel, delay, or reduce a large amount of business with us in the future. If one or more of our customers were to become insolvent or otherwise unable to pay for our products and/or services, our operating results, financial condition, and cash flows could be adversely affected.

Order backlog may not provide an accurate indication of present or future revenue levels for the Company. For many Components and Sensors and EMS products, the period between receipt of orders and expected delivery is relatively short. Additionally, large orders from major customers may include backlog covering an extended period of time. Production scheduling and delivery for these orders could be changed or canceled by the customer on relatively short notice.

The following table shows order backlog by segment and in total as of January 30, 2011,29, 2012, and January 31, 2010.

Order backlog as of the month-end of January will generally be filled during the same fiscal year.

In the Components and Sensors segment, we compete with many U.S. and non-U.S. manufacturers principally on the basis of product features, price, technology, quality, reliability, delivery, and service. Most of our product lines encounter significant global competition. The number of significant competitors varies from product line to product line. No one competitor competes with us in every product line, but many competitors are larger and more diversified than CTS. Some competitors are also our customers for Components and Sensors and EMS products.

In the EMS segment, we compete with a number of well-established U.S. and non-U.S. manufacturers on the basis of process capability, price, technology, quality, reliability, and delivery in the markets in which we participate. Some of our competitors have greater manufacturing and financial resources than CTS. However, we generally do not pursue extremely high volume or highly price-sensitive business, as some of our larger competitors do.

CTS CORPORATION    5

In both the EMS and Components and Sensors and EMS segments, some customers have reduced or plan to reduce their number of suppliers, while increasing the volume of their purchases. Most customers are demanding higher quality, reliability, and delivery standards from us as well as our competitors. These trends create opportunities for us, but also increase the risk of loss of business to competitors. We are subject to competitive risks that represent the nature of the electronics industry, including short product life cycles and technical obsolescence.

We believe we compete most successfully in custom products manufactured to meet specific applications of major OEMs and with EMS products oriented toward high mix and low-to-medium volume outsourcing needs of OEMs.

In 2010, 44%2011, 37% of net sales to external customers originated from non-U.S. operations compared to 44% in 2010 and 45% in 2009 and 53% in 2008.2009. At December 31, 2010,2011, approximately 40%44% of total assets were located at non-U.S. operations. At December 31, 20092010 and 2008,2009, total assets that were located at non-U.S. operations were approximately 41% and 40%, respectively.. A substantial portion of these assets, other than cash and cash equivalents, cannot readily be liquidated. We believe the business risks to our non-U.S. operations, though substantial, are normal risks for non-U.S.global businesses. These risks include currency controls and changes in currency exchange rates, longer collection cycles, political and transportation risks, economic downturns and inflation, government regulations and expropriation. Our non-U.S. m anufacturingmanufacturing facilities are located in Canada, China, Czech Republic, Mexico, Scotland, Singapore, Switzerland, Taiwan, and Thailand.

Net sales to external customers originating from non-U.S. operations for the Components and sensors segment were $193.3 million in 2011 compared to $202.2 million in 2010, and $163.8 million in 2009. Net sales to external customers originating from non-U.S. operations for the EMS segment were $61.7$27.2 million in 2011, compared to $39.9 million in 2010, compared toand $60.8 million in 2009, and $144.5 million in 2008.  Net sales to external customers originating from non-U.S. operations for the Components and Sensors segment were $180.4 million in 2010 compared to $163.8 million in 2009, and $233.8 million in 2008.2009. Additional information about net sales to external customers, operating earnings and total assets by segment, and net sales by geographic area and long-lived assets by geographic area, is contained in Note L, “Segments,” appearing in the notes to the consolidated financial statements as noted in the Index appearing under Item 15 (a) (1) and (2), which is incorporated herein by reference.

In 2010,2011, we spent $18.3$20.0 million for research and development activities compared to $18.3 million in 2010 and $14.2 million in 2009 and $18.3 million in 2008.2009. Ongoing research and development activity in the Components and Sensors segment is primarily focused on expanded applications and new product development, as well as current product and process enhancements. Research and development expenditures in the EMS segment are typically very low.

We believe a strong commitment to research and development is required for future growth in the Components and Sensors segment. Most of our research and development activities relate to developing new, innovative products and technologies, improving product flow, and adding product value to meet the current and future needs of our customers. We provide our customers with full systems support to ensure quality and reliability through all phases of design, launch, and manufacturing to meet or exceed customer requirements. Many such research and development activities benefit one or a limited number of customers or potential customers. All research and development costs are expensed as incurred.

We employed 4,3694,234 people at December 31, 2010,2011, with 70% of these people located outside the United States. Approximately 154160 employees at one location in the United States were covered by two collective bargaining agreements as of December 31, 2010.2011. One agreement, which covers 120128 employees, is scheduled to expire in 2015 and the other, which covers 3432 employees, is scheduled to expire in 2013. We employed 4,3164,369 people at December 31, 2009.

We are incorporated in the State of Indiana. Our principal corporate office is located at 905 West Boulevard North, Elkhart, Indiana 46514.

Our internet address is http://www.ctscorp.com. We make available through our internet website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (“SEC”). The information contained on or accessible through our internet website is not part of this or any other report we file or furnish to the SEC, other than the documents that we file with the SEC that are incorporated by reference herein.

The following are certain risk factors that could affect our business, financial condition and operating results. These risk factors should be considered in connection with evaluating the forward-looking statements contained in this Annual Report on Form 10-K because these factors could cause our actual results and financial condition to differ materially from those projected in the forward-looking statements. Before you invest in CTS, you should know that making such an investment involves some risks, including the risks described below. The risks that are highlighted below are not the only ones that we face. If any of the following risks actually occur, our business, financial condition or operating results could be negatively affected.

We depend on a small number of customers for a large portion of our business, and changes in the level of our customers’ orders have, in the past, had a significant impact on our results of operations. Our 15 largest customers represent a substantial portion of our sales: approximately 48% of net sales in 2011; 48% of net sales in 2010; and 51% of net sales in 2009; and 53% of net sales in 2008.2009. Our largest customer represented less than 10% of our net sales in 2010.2011, 2010 and 2009. If a major customer significantly cancels, delays or reduces the amount of business it does with us, there could be an adverse effect on our business, financial condition and operating results. Such an adverse effect would likely be material if one of our largest customers significantly reduces its amount of business. Significant pricing and margin pressures exerted by a key customer could also mate riallymaterially adversely affect our operating results. In addition, we generate significant accounts receivable from sales to our major customers. If one or more of our largest customers were to become insolvent or otherwise unable to pay or were to delay payment for services, our business, financial condition and operating results could be materially adversely affected.

Adverse changes in the underlying profitability and financial outlook of our operations in several jurisdictions could lead to changes in our valuation allowances against deferred tax assets and other tax accruals that could materially and adversely affect our results of operations.

CTS CORPORATION    7

Several countries in which we are located allow for tax incentives to attract and retain business. These tax incentives expire over various periods and are subject to certain conditions with which we expect to comply. Our taxes could increase if certain tax incentives are not renewed upon expiration, or tax rates applicable to us in such jurisdictions are otherwise increased. In addition, further acquisitions or divestitures may cause our effective tax rate to increase.

We base our tax position upon the anticipated nature and conduct of our business and upon our understanding of the tax laws of the various countries in which we have assets or conduct activities. However, our tax position is subject to review and possible challenge by taxing authorities and to possible changes in law, which may have retroactive effect. We cannot determine in advance the extent to which some jurisdictions may require us to pay taxes or make payments in lieu of taxes.

We compete against many providers of electronics manufacturing services. Some of our competitors have substantially greater manufacturing and financial resources, and in some cases have more geographically diversified international operations, than we do. Our competitors, such as Benchmark Electronics, Inc., and Sanmina-SCI Corporation, include both large global EMS providers and smaller EMS companies that often have a regional, product, service or industry specific focus. We also face competition from the manufacturing operations of our current and future OEM customers, which may elect to manufacture their own products internally rather than outsource the manufacturing to EMS providers. In addition, we could face competition in the future from other large global EMS providers, such as Celestica, Inc., Flextronics International Ltd. and J abilJabil Circuit, Inc., which currently provide services to some of our largest customers for different products, as well as competition from smaller EMS companies such as Plexus Corp. and LaBarge,Ducommun, Inc. We may be at a competitive disadvantage with respect to price when compared to manufacturers with lower cost structures, particularly those with significant offshore facilities located where labor and other costs are lower. Competition may intensify further if more companies enter the markets in which we operate. Our failure to compete effectively could materially adversely affect our business, financial condition and operating results.

The components and Sensors segment operates insensors industry is highly competitive industries that areand characterized by price erosion and rapid technological change. WeThrough our Components and Sensors segment, we compete against many domestic and foreign companies, some of which have substantially greater manufacturing, financial, research and development and marketing resources than we do. If any customer becomes dissatisfied with our prices, quality or timeliness of delivery, among other things, it could award future business or even move existing business to our competitors. Moreover, some of our customers could choose to manufacture and develop particular products themselves rather than purchase them from us. Increased competition could result in price reductions, reduced profit margins and loss of market share, each of which could materially adversely affect our business, financial condition a ndand operating results. These developments also may materially adversely affect our ability to compete against these competitors.manufacturers going forward. We cannot assure you that our products will continue to compete successfully with our competitors’ products, including OEMs, many of which are significantly larger than we are and have greater financial and other resources.

The technologies relating to some of our products have undergone, and are continuing to undergo, rapid and significant changes. Specifically, end markets for electronic components and assemblies are characterized by technological change, frequent new product introductions and enhancements, changes in customer requirements and emerging industry standards. The introduction of products embodying new technologies and the emergence of new industry standards could render our existing products obsolete and unmarketable before we can recover any or all of our research, development and commercialization expenses onor capital investments. Furthermore, the life cycles of our products and the products we manufacture for others vary, may change and are difficult to estimate.

We may experience difficulties that could delay or prevent the successful development, introduction and marketing of new products or product enhancements and our new products or product enhancements may not adequately meet the

8    CTS CORPORATION

requirements of the marketplace or achieve market acceptance. If we are unable, for technological or other reasons, to develop and market new products or product enhancements in a timely and cost-effective manner, our business, financial condition and operating results could be materially adversely affected.

We generally do not obtain firm, long-term purchase commitments from our customers, and have often experienced reduced lead times in customer orders. Customers cancel their orders, change production quantities and delay production for a number of reasons. Uncertain economic and geopolitical conditions may result in some of our customers delaying the delivery of some of the products we manufacture for them and placing purchase orders for lower volumes of products than previously anticipated. Cancellations, reductions or delays by a significant customer or by a group of customers may harm our results of operations by reducing the volumes of products we manufacture, as well as by causing a delay in the recovery of our expenditures for inventory in preparation for customer orders and lower asset utilization resulting in lower gross margins.

In addition, customers may require that manufacturing of their products be transitioned from one facility to another to achieve cost and other objectives. Such transfers may result in inefficiencies and costs due to resulting excess capacity and overhead at one facility and capacity constraints and the inability to fulfill all orders at another. In addition, we make significant decisions, including determining the levels of orders that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimates of customer requirements. The short-term nature of our customers’ commitments and the changes in demand for their products reduce our ability to estimate accurately future customer requirements. This makes it difficult to schedule production and maxi mizemaximize utilization of our manufacturing capacity. Anticipated orders may not materialize and delivery schedules may be deferred as a result of changes in demand for our products or our customers’ products. We often increase staffing and capacity, and incur other expenses to meet the anticipated demand of our customers, which causes reductions in our gross margins if customer orders are delayed or canceled. On occasion, customers require rapid increases in production, which may stress our resources and reduce margins. We may not have sufficient capacity at any given time to meet our customers’ demands. In addition, because many of our costs and operating expenses are relatively fixed over the short term, a reduction in customer demand harms our gross margin and operating income until such time as adjustments can be made to activity or operating levels and structural costs.

We sell products to customers in cyclical industries that have experienced economic and industry downturns. These markets for our automotive products, electronic components and sensors and EMS products have softened in the past and may again soften in the future. We may face reduced end-customer demand, underutilization of our manufacturing capacity, changes in our revenue mix and other factors that could adversely affect our results of operations in the near term. We cannot predict whether we will achieve profitability in future periods.

Net sales to the automotive, defense and aerospace, computer and communications industries represent a substantial portion of our revenues. Factors negatively affecting these industries and the demand for their products also negatively affect our business, financial condition and operating results. Any adverse occurrence, including among others, industry slowdown, recession, political instability, costly or constraining regulations, armed hostilities, terrorism, excessive inflation, prolonged disruptions in one or more of our customers’ production schedules or labor disturbances, that results in significant decline in the volume of sales in these industries, or in an overall downturn in the business and operations of our customers in these industries, could materially adversely affect o urour business, financial condition and operating results. Also, the automotive industry is generally highly unionized and some of our customers have, in the past, experienced labor disruptions. Furthermore, the automotive industry is highly cyclical in nature and sensitive to changes in general economic conditions,

CTS CORPORATION    9

consumer preferences and interest rates. Some of our automotive customers have required government bailouts and/or have filed for bankruptcy reorganization. The failure of one or more automotive manufacturers may result in the failure to receive payment in full for products sold and an abrupt cancellation in demand for certain products. Weakness in auto demand, the insolvency of automobile manufacturers or their suppliers, and constriction of credit markets may negatively and materially affect our facility utilization, cost structure, financial condition, and operating results.

Despite our quality control and quality assurance efforts, defects may occur in the products we manufacture due to design or manufacturing errors or component failure. Product defects may result in delayed shipments and reduced demand for our products. We may be subject to increased costs due to warranty claims on defective products. Product defects may result in product liability claims against us where defects cause, or are alleged to cause, property damage, bodily injury or death. As we more deeply penetrate the automotive and medical device manufacturing markets, the risk of exposure to products liability litigation increases. We may be required to participate in a recall involving products which are, or are alleged to be, defective. We carry insurance for certain legal matters involving product liability; however, we do no tnot have coverage for all costs related to product defects and the costs of such claims, including costs of defense and settlement, may exceed our available coverage.

We manufacture accelerator pedal assemblies for a number of automobile manufacturers, including subsidiaries of Toyota Motor Corporation (“Toyota”). We have supplied accelerator pedal assemblies to Toyota since the 2005 model year. Sales to Toyota have accounted for approximately 4.0%2.9%, 3.2%4.0% and 2.5%3.2% of our annual revenue for the years ended December 31, 2011, 2010 2009 and 2008,2009, respectively. We manufacture all pedal assemblies to specifications approved by the customer, including Toyota.

In January 2010, Toyota issued a voluntary recall for approximately 2.3 million vehicles in North America containing CTS-manufactured accelerator pedal assemblies. In addition, Toyota temporarily halted production and sale of eight vehicle models using these pedal assembly designs. The recall was issued due to what Toyota described as “a rare set of conditions which may cause the accelerator pedal to become harder to depress, slower to return or, in the worst case, stuck in a partially depressed position.”

No accidents, injuries, or deaths have been proven directly or proximately to result from slow returning or sticking CTS-manufactured pedals. We are aware that we have been named as a defendant in lawsuits filed in the United States and Canada stemming from allegations of problems with Toyota vehicles, and additional lawsuits may follow.

While Toyota has repeatedly acknowledged that CTS designs products to Toyota’s specifications and the recall is Toyota’s responsibility, and Toyota has agreed to indemnify us in connection with certain third-party claims and actions, we cannot assure you that Toyota will not seek to recover a portion of their recall-related costs from us, and the insurance we carry may not be sufficient to cover all such costs. We also cannot assure you that the National Highway Transportation Safety Administration or other governmental authorities will not attempt to impose fines and penalties upon us and Toyota or other automobile manufactures will not reduce their purchase of CTS pedals and other automotive products. Accordingly, our results of operations, cash flow and financial position could be adversely affected.

We transact business in various foreign countries. We present our consolidated financial statements in U.S. dollars, but a portion of our revenues and expenditures are transacted in other currencies. As a result, we are exposed to fluctuations in foreign currencies. We have currency exposure arising from both sales and purchases denominated in currencies other than

10    CTS CORPORATION

the U.S. dollar. Volatility in the exchange rates between the foreign currencies and the U.S. dollar could harm our business, financial condition and operating results. Furthermore, to the extent we sell our products in foreign markets, currency fluctuations may result in our products becoming too expensive for foreign customers.

We experience fluctuations in our operating results. Some of the principal factors that contribute to these fluctuations are: changes in demand for our products; our effectiveness in managing manufacturing processes, costs and timing of our component purchases so that components are available when needed for production, while mitigating the risks of purchasing inventory in excess of immediate production needs; the degree to which we are able to utilize our available manufacturing capacity; changes in the cost and availability of components, which often occur in the electronics manufacturing industry and which affect our margins and our ability to meet delivery schedules; general economic and served industry conditions; and local conditions and events that may affect our production volumes, such as labor conditions and political instabilit y.

In addition, due to the significant differences in the operating earnings margins in our two reporting segments, the mix of sales between our Components and Sensors segment and our EMS segment affects our operating results from period to period.

Because we have significant international operations, our operating results and financial condition could be materially adversely affected by economic, political, health, regulatory and other factors existing in foreign countries in which we operate. Our international operations are subject to inherent risks, which may materially adversely affect us, including: political and economic instability in countries in which our products are manufactured; expropriation or the imposition of government controls; changes in government regulations; export license requirements; trade restrictions; earnings repatriation and expatriation restrictions; exposure to different legal standards; less favorable intellectual property laws; health conditions and standards; currency controls; fluctuations in exchange rates; increases in the duties and taxes we pay; high levels of inflation or deflation; greater difficulty in collecting accounts receivable and longer payment cycles; changes in labor conditions and difficulties in staffing and managing our international operations; limitations on insurance coverage against geopolitical risks, natural disasters and business operations; and communication among and management of international operations. In addition, these same factors may also place us at a competitive disadvantage compared to some of our foreign competitors.

In addition, we could be adversely affected by violations of the Foreign Corrupt Practices Act ("FCPA"(“FCPA”) and similar worldwide anti-bribery laws. The FCPA and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business. Our Code of Ethics mandates compliance with these anti-bribery laws. We operate in many parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. We cannot assure you that our internal controls and procedures always will protect us from the reckless or criminal acts committed by our employees or age nts.agents. If we are found to be liable for FCPA violations (either due to our own acts or our inadvertence or due to the acts or inadvertence of others), we could suffer from criminal or civil penalties or other sanctions, which could have a material adverse effect on our business.

Furthermore, because a significant portion of our products are manufactured in Asia, including China, Singapore, Thailand and Taiwan, any conflict or uncertainty in these countries, including public health or safety concerns, could have a material adverse effect on our business, financial condition and operating results.

In December 2010, CTS2011, we implemented atwo restructuring planplans to realign and consolidate certain operations for the purpose of improving itstheir cost structure.structures. The implementation of this plan resulted in the elimination of approximately 80130 positions and the write-off of certain inventory and long-lived assets during the fourth quarter of 2010.within our global operations. The implementation was substantially completed by the end of December 2010.

CTS CORPORATION    11

We may incur restructuring and impairment charges in the future if circumstances warrant. If we restructure our operations in the future and are unsuccessful in implementing restructuring plans, we may experience disruptions in our operations and higher ongoing costs, which may materially adversely affect our business, financial condition and operating results.

We make a number of assumptions relating to our pension plans in order to measure the financial position of the plans and the net periodic benefit cost. The most significant assumptions relate to the discount rate, the expected long term return on plan assets and the rate of future compensation increases. If these assumptions prove to be significantly different from actual rates, then we may need to record additional expense relating to the pension plans, which could have a material adverse effect on our results of operations and could require cash contributions to fund future pension expenseobligation payments.

We intend to explore opportunities to buy other businesses or technologies that could complement, enhance or expand our current business or product lines or that might otherwise offer us growth opportunities. We may have difficulty finding these opportunities or, if we do identify these opportunities, we may not be able to complete the transactions for reasons including a failure to secure financing. In addition, we may not be able to successfully or profitably integrate, operate, maintain and manage our newly acquired operations or employees. Any transactions that we are able to identify and complete may involve a number of risks, including: the diversion of management’s attention from our existing business to integrate the operations and personnel of the acquired or combined business or joint venture; possible adverse affects on our operating results during the integration process; difficulties managing and integrating operations in geographically dispersed locations; incre asesincreases in our expenses and working capital requirements, which reduce our return on invested capital; exposure to unanticipated liabilities of acquired companies; and our possible inability to achieve the intended objectives of the transaction. In addition,Even if we may not be able to successfully or profitably integrate, operate, maintain and manage our newly acquired operations or employees. Weare initially successful in integrating a new operation, we may not be able to maintain uniform standards, controls, procedures and policies, and this may lead to operational inefficiencies. In addition, future acquisitions may result in dilutive issuances of equity securities or the incurrence of additional debt. These and other factors could harm our ability to achieve anticipated levels of profitability at acquired operations or realize other anticipated benefits of an acquisition, and could adversely affect our business and operating results.

We have in the past, and may in the future, consider divesting certain business operations. Divestitures may involve a number of risks, including the diversion of management’s attention, significant costs and expenses, the loss of customer relationships and cash flow, and the disruption of operations in the affected business. Failure to timely complete or consummate a divestiture may negatively affect valuation of the affected business or result in restructuring charges.

The success of our business depends, in part, upon our ability to protect trade secrets, copyrights and patents, obtain or license patents and operate without infringing on the intellectual property rights of others. We rely on a combination of trade secrets, copyrights, patents, nondisclosure agreements and technical measures to protect our proprietary rights in our products and technology. The steps we have taken by us in this regard may not be adequate to prevent misappropriation of our technology.technology may be inadequate. In addition, the laws of some foreign countries in which we operate do not protect our proprietary rights to the same extent as do the laws of the United States. Although we continue to evaluate and implement protective measures, there can be no assurance that these efforts will be successful. Our inability to protect our intellectual property right srights could diminish or eliminate the competitive advantages that we derive from our technology, cause us to lose sales or otherwise harm our business.

12    CTS CORPORATION

We believe that patents will continue to play an important role in our business. However, there can be no assurance that we will be successful in securing patents for claims in any pending patent application or that any issued patent will provide us with any competitive advantage. We also cannot provide assurance that the patents will not be challenged by third parties or that the patents of others will not materially adversely affect our ability to do business.

We may become involved in litigation in the future to protect our intellectual property or because others may allege that we infringed on their intellectual property. These claims and any resulting lawsuit could subject us to liability for damages and invalidate our intellectual property rights. If an infringement claim is successfully asserted by a holder of intellectual property rights, we may be required to cease marketing or selling certain products, pay a penalty for past infringement and spend significant time and money to develop a non-infringing product or process or to obtain licenses for the technology, process or information from the holder. We may not be successful in the development of a non-infringing alternative, or licenses may not be available on commercially acceptable terms, if at all, in which case we may lose sales an dand profits. In addition, any litigation could be lengthy and costly and could materially adversely affect us even if we are successful in the litigation.

In the past, from time to time, there have been shortages in certain raw materials used in the manufacture of our components and sensors and certain electronic components purchased by us and incorporated into assemblies and subassemblies. Unanticipated raw material or electronic component shortages may prevent us from making scheduled shipments to customers. Our inability to make scheduled shipments could cause us to experience a shortfall in revenue, increase our costs and adversely affect our relationship with affected customers and our reputation as a reliable service provider. We may be required to pay higher prices for raw materials or electronic components in short supply and order these raw materials or electronic components in greater quantities to compensate for variable delivery times. We may also be required to pay higher price sprices for raw materials or electronic components due to inflationary trends regardless of supply. As a result, raw material or electronic component shortages and price increases could adversely affect our operating results for a particular period due to the resulting revenue shortfall and increased costs.

We depend on our senior executive officers and other key personnel to run our business. We do not have long-term retention contracts with our key personnel. The loss of any of these officers or other key personnel could adversely affect our operations. Competition for qualified employees among companies that rely heavily on engineering and technology is at times intense, and the loss of qualified employees or an inability to attract, retain and motivate additional highly skilled employees required for the operation and expansion of our business could hinder our ability to conduct research activities successfully and develop marketable products.

Our operations are regulated by a number of federal, state, local and foreign environmental and safety laws and regulations that govern, among other things, the discharge of hazardous materials into the air and water as well as the handling, storage and disposal of these materials. Compliance with environmental laws is a major consideration for us because we use hazardous materials in our manufacturing processes. If we violate environmental laws or regulations, we could be held liable for substantial fines, damages, and costs of remedial actions. Our environmental permits could also be revoked or modified, which could require us to cease or limit production at one or more of our facilities, thereby materially adversely affecting our business, financial condition and operating results. Environmental laws and requirements have generally bec omebecome more stringent over time and could continue to do so, imposing greater compliance costs and increasing risks and penalties associated with any violation, which also could materially affect our business, financial condition and operating results.

In addition, because we are a generator of hazardous wastes, even if we fully comply with applicable environmental laws and requirements, we may be subject to financial exposure for costs, including costs of investigation and any remediation, associated with contaminated sites at which hazardous substances from our operations have been stored, treated or disposed

CTS CORPORATION    13

of. We may also be subject to exposure for such costs at sites that we currently own or operate or formerly owned or operated. Such exposure may be joint and several, so that we may be held responsible for more than our share of the contamination or even for the entire contamination.

We have been notified by the U.S. Environmental Protection Agency, state environmental agencies and, in some cases, generator groups that we are or may be a potentially responsible party regarding hazardous substances at several sites not owned or operated by us, as well as several sites that we own. Although we estimate our potential liability with respect to environmental violations or alleged violations and other environmental liabilities and reserves for such matters, we cannot assure you that our reserves will be sufficient to cover the actual costs that we incur as a result of these matters. We also cannot assure you that additional contamination will not be found in the future, either at sites currently known to us or at other sites. Any liability we may have for such matters could materially adversely affect our business, financia lfinancial condition and operating results.

As of December 31, 2010,2011, our debt balance was $70$74.4 million, consisting of borrowings under our revolving credit facility. The level of our indebtedness could, among other things: increase our vulnerability to general economic and industry conditions, including recessions; require us to use cash flow from operations to service our indebtedness, thereby reducing our ability to fund working capital, capital expenditures, research and development efforts and other expenses; limit our flexibility in planning for, or reacting to, changes in our business and the industries in which we operate; place us at a competitive disadvantage compared to competitors that have less indebtedness; or limit our ability to borrow additional funds that may be needed to operate and expand our business.

Our revolving credit agreement requires us to deliver quarterly financial statements, annual financial statements, auditors certifications and compliance certificates within a specified number of days after the end of a quarter and year. Additionally, the revolving credit agreement contains restrictions limiting our ability to: dispose of assets; incur certain additional debt; repay other debt or amend subordinated debt instruments; create liens on assets; make investments, loans or advances; make acquisitions or engage in mergers or consolidations; engage in certain transactions with our subsidiaries and affiliates; and the amounts allowed for stock repurchases and dividend payments.

The restrictions contained in our credit agreement could limit our ability to plan for or react to market conditions or meet capital needs or could otherwise restrict our activities or business plans. These restrictions could adversely affect our ability to finance our operations, strategic acquisitions, investments or other capital needs or to engage in other business activities that could be in our interests.

Further, our ability to comply with theseour loan covenants may be affected by events beyond our control. Ifcontrol and if we breach any of these covenants or restrictions, it could result in an event of default under our credit facility, or documents governing any other existing or future indebtedness. A default, if not cured or waived, may permit acceleration of our indebtedness. In addition, our lenders could terminate their commitments to make further extensions of credit under our credit agreement. If our indebtedness is accelerated, we cannot be certain that we will have sufficient funds to pay the accelerated indebtedness or that we will have the ability to refinance accelerated indebtedness on terms favorable to us or at all.

We are subject to the ongoing internal control provisions of Section 404 of the Sarbanes-Oxley Act of 2002 (“the Act”). Our controls necessary for continued compliance with the Act may not operate effectively at all times and may result in a material weakness. The identification of material weaknesses in internal control over financial reporting, if any, could indicate a lack of proper controls to generate accurate financial statements. Further, our internal control effectiveness may be impacted if we are unable to retain sufficient skilled finance and accounting personnel, especially in light of the increased demand for such personnel among publicly traded companies.

None.

We regularly assess the adequacy of our manufacturing facilities for manufacturing capacity, available labor, and proximity to our markets and major customers. Management believes our manufacturing facilities are suitable and adequate, and have sufficient capacity to meet our current needs. The extent of utilization varies from plant to plant and with general economic conditions. We also review the operating costs of our facilities and may from time-to-time relocate or move a portion of our manufacturing activities in order to reduce operating costs and improve asset utilization and cash flow.

We manufacture accelerator pedals for a number of automobile manufacturers, including subsidiaries of Toyota. In January 2010, Toyota initiated a recall of approximately 2.3 milliona substantial number of vehicles in North America containing pedals manufactured by CTS. The pedal recall and associated events have led to us being named as a co-defendant with Toyota in certain litigation.

In February 2010, we entered into an agreement with Toyota whereby Toyota agreed that it will indemnify, defend, and hold us harmless from, and the parties will cooperate in the defense of, certain third-party civil claims and actions that are filed or asserted in the United States or Canada and that arise from or relate to alleged incidents of unintended acceleration of Toyota and Lexus vehicles. If it is determined that CTS acted negligently in selecting materials or processes where we had sole control over the selection process, in failing to meet Toyota’s specifications, or in making unapproved changes in component design or materials, and such negligence caused or contributed to a claim, we will be responsible for any judgment that may be rendered against us individually, or any portion of a judgment that may be allo catedallocated to us, but limited only to the extent of insurance collected from our insurers. Toyota would remain responsible to defend CTS in these actions and would remain responsible for any balance of the remaining liability over amounts recovered by insurance. The agreement also does not cover costs or liabilities in connection with government investigations, government hearings, or government recalls.

Presently, we have been served process and named as co-defendant with Toyota in approximately thirty-fourthirty-one open lawsuits; we have been dismissed as a defendant from an additional twentythirty lawsuits. The claims brought generally fall into two categories, those that allege sudden unintended acceleration of Toyota vehicles led to injury or death, and those that allege economic

16    CTS CORPORATION

harm to owners of Toyota vehicles related to vehicle defects. Some suits combine elements of both. Claims include demands for compensatory and special damages. To date, the only actions filed where we are aware we have been named as a co-defendant are civil actions filed in the Unites States or Canada. All currently open lawsuits are subject to the indemnification agreement described above. Some of these law suitslawsuits arise out of incidents involving models for which we do not manufacture the pedal, such as all Lexus models, the Toyota Prius, and the Toyota Tacoma, or for which we manufacture only a portion of the pedals, such as the Toyota Camry. Many lawsuits have been consolidated in federal multidistrict litigation in the United States District Court, Southern District of California, though some remain in various other courts.

Certain processes in the manufacture of our current and past products create hazardous waste by-products as currently defined by federal and state laws and regulations. We have been notified by the U.S. Environmental Protection Agency, state environmental agencies, and in some cases, generator groups, that we are or may be a potentially responsible party regarding hazardous waste remediation at several non-CTS sites. In addition to these non-CTS sites, we have an ongoing practice of providing reserves for probable remediation activities at certain of our manufacturing locations and for claims and proceedings against us with respect to other environmental matters. In the opinion of management, based upon all present available information relating to all such matters, either adequate provisions for probable costs has been made, or the ultimate costs resulting will not materially affect our consolidated financial position, results of operations, or cash flows.

Certain other claims are pending against us with respect to matters arising out of the ordinary conduct of our business. For all other claims, in the opinion of management, based upon presently available information, either adequate provision for anticipated costs have been accrued or the ultimate anticipated costs will not materially affect our consolidated financial position, results of operations, or cash flows.

CTS common stock is listed on the New York Stock Exchange under the symbol “CTS.” On February 18, 2011,20, 2012, there were approximately 1,5521,439 common shareholders of record.

During the 4^th quarter of 2011, we increased our quarterly dividend rate to $0.035 per share, or an annual rate of $0.14 per share. Prior to this increase our practice iswas to pay quarterly dividends at the rate of $0.03 per share, or an annual rate of $0.12 per share. The declaration of a dividend and the amount of any such dividend is subject to earnings, anticipated working capital, capital expenditures, other investment requirements, the financial condition of CTS, and any other factors considered relevant by the Board of Directors.

Per Share Data

As shown in the following table, there were no CTS common stock repurchases made by the Company during the three months ended December 31, 2010:

(In thousands of dollars except per share and other data)