UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

FORM 10-K

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer  ☒    Accelerated filer  ☐   Non-accelerated filer  ☐

Smaller reporting company  ☐     Emerging growth company  ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

PART I

Safe Harbor

Statements in this document that are not historical facts, including statements that (i) are in the future tense; (ii) include the words “expects,” “plans,” “targets,” “estimates,” “believes,” “anticipates,” or similar words that reference Snap-on Incorporated (“Snap-on” or “the company”) or its management; (iii) are specifically identified as forward-looking; or (iv) describe Snap-on’s or management’s future outlook, plans, estimates, objectives or goals, are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Snap-on cautions the reader that any forward-looking statements included in this document that are based upon assumptions and estimates were developed by management in good faith and are subject to risks, uncertainties or other factors that could cause (and in some cases have caused) actual results to differ materially from those described in any such statement. Accordingly, forward-looking statements should not be relied upon as a prediction of actual results or regarded as a representation by the company or its management that the projected results will be achieved. For those forward-looking statements, Snap-on cautions the reader that numerous important factors, such as those listed below, as well as those factors discussed in this Annual Report on Form 10-K, particularly those in “Item 1A: Risk Factors,” could affect the company’s actual results and could cause its actual consolidated results to differ materially from those expressed in any forward-looking statement made by, or on behalf of, Snap-on.

In addition, investors should be aware that generally accepted accounting principles in the United States of America (“GAAP”) prescribe when a company should reserve for particular risks, including litigation exposures. Accordingly, results for a given reporting period could be significantly affected if and when a reserve is established for a major contingency. Reported results, therefore, may appear to be volatile in certain accounting periods.

Fiscal Year

Snap-on’s fiscal year ends on the Saturday that is on or nearest to December 31. Unless otherwise indicated, references in this document to “fiscal 2020” or “2020” refer to the fiscal year ended January 2, 2021; references to “fiscal 2019” or “2019” refer to the fiscal year ended December 28, 2019; and references to “fiscal 2018” or “2018” refer to the fiscal year ended December 29, 2018;2018. References in this document to 2020, 2019 and references to “fiscal 2017” or “2017”2018 year end refer to theJanuary 2, 2021, December 28, 2019, and December 29, 2018, respectively. Snap-on’s 2020 fiscal year ended December 30, 2017.contained 53 weeks of operating results with the extra week occurring in the fourth quarter. Snap-on’s 2019 2018 and 20172018 fiscal years each contained 52 weeks of operating results. References in this document to 2019, 2018 and 2017 year end refer to December 28, 2019, December 29, 2018, and December 30, 2017, respectively.

Item 1: Business

Snap-on was incorporated under the laws of the state of Wisconsin in 1920 and reincorporated under the laws of the state of Delaware in 1930. Snap-on is a leading global innovator, manufacturer and marketer of tools, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hand and power tools, tool storage, diagnostics software, handheld and PC-based diagnostic products, information and management systems, shop equipment and other solutions for vehicle dealerships and repair centers, as well as for customers in industries, such as aviation and aerospace, agriculture, construction, government and military, mining, natural resources, power generation and technical education. Snap-on also derives income from various financing programs designed to facilitate the sales of its products and support its franchise business.

Snap-on markets its products and brands worldwide through multiple sales distribution channels in more than 130 countries. Snap-on’s largest geographic markets include the United States, Europe, Canada and Asia Pacific. Snap-on reaches its customers through the company’s franchised, company-direct, distributor and internet channels.

The company began with the development of the original Snap-on interchangeable socket set in 1920 and subsequently pioneered mobile tool distribution in the automotive repair market, where well stockedwell-stocked vans sell to professional vehicle technicians at their place of business. Today, Snap-on defines its value proposition more broadly, extending its reach “beyond the garage” to deliver a broad array of unique solutions that make work easier for serious professionals performing critical tasks. The company’s “coherent growth” strategy focuses on developing and expanding its professional customer base in its legacy automotive market, as well as in adjacent markets, additional geographies and other areas, including in critical industries, where the cost and penalties for failure can be high. In addition to its coherent growth strategy, Snap-on is committed to its “Value Creation Processes” – a set of strategic principles and processes designed to create value and employed in the areas of (i) safety; (ii) quality; (iii) customer connection; (iv) innovation; and (v) rapid continuous improvement (“RCI”). Snap-on’s RCI initiatives employ a structured set of tools and processes across multiple businesses and geographies intended to eliminate waste and improve operations. Savings from Snap-on’s RCI initiatives reflect benefits from a wide variety of ongoing efficiency, productivity and process improvements, including savings generated from product design cost reductions, improved manufacturing line set-up and change-over practices, lower-cost sourcing initiatives and facility consolidations.

Snap-on’s primary customer segments include: (i) commercial and industrial customers, including professionals in critical industries and emerging markets; (ii) professional vehicle repair technicians who purchase products through the company’s mobile tool distribution network; and (iii) other professional customers related to vehicle repair, including owners and managers of independent and original equipment manufacturer (“OEM”) dealership service and repair shops (“OEM dealerships”). Snap-on’s Financial Services customer segment includes: (i) franchisees’ customers, principally serving vehicle repair technicians, and Snap-on customers who require financing for the purchase or lease of tools and diagnostics and equipment products on an extended-term payment plan; and (ii) franchisees who require financing options for vehicle leases and business loans.needs.

Snap-on’s business segments are based on the organization structure used by management for making operating and investment decisions and for assessing performance. Snap-on’s reportable business segments are: (i) the Commercial & Industrial Group; (ii) the Snap-on Tools Group; (iii) the Repair Systems & Information Group; and (iv) Financial Services. The Commercial & Industrial Group consists of business operations serving a broad range of industrial and commercial customers worldwide, including customers in the aerospace, natural resources, government, power generation, transportation and technical education market segments (collectively, “critical industries”), primarily through direct and distributor channels. The Snap-on Tools Group consists of business operations primarily serving vehicle service and repair technicians through the company’s worldwide mobile tool distribution channel. The Repair Systems & Information Group consists of business operations serving other professional vehicle repair customers worldwide, primarily owners and managers of independent repair shops and OEM dealerships, through direct and distributor channels. Financial Services consists of the business operations of Snap-on Credit LLC (“SOC”), the company’s financial services business in the United States, and Snap-on’s other financial services subsidiaries in those international markets where Snap-on has franchise operations. See Note 1920 to the Consolidated Financial Statements for information on business segments and foreign operations.

Snap-on evaluates the performance of its operating segments based on segment revenues, including both external and intersegment net sales, and segment operating earnings. Snap-on accounts for intersegment sales and transfers based primarily on standard costs with reasonable mark-ups established between the segments. Identifiable assets by segment are those assets used in the respective reportable segment’s operations. Corporate assets consist of cash and cash equivalents (excluding cash held at Financial Services), deferred income taxes and certain other assets. Intersegment amounts are eliminated to arrive at Snap-on’s consolidated financial results.

Recent Acquisitions

On August 7, 2019, Snap-on acquired Cognitran Limited (“Cognitran”) for a preliminary cash purchase price of $30.4$30.6 million (or $29.4$29.6 million, net of cash acquired). The preliminary purchase price is subject to change based upon finalization of a working capital adjustment that is expected to be completed in the first quarter of 2020. Cognitran, based in Chelmsford, U.K., specializes in flexible, modular and highly scalable “Software as a Service” (SaaS) products for OEM customers and their dealers, focused on the creation and delivery of service, diagnostics, parts and repair information to the OEM dealers and connected vehicle platforms. The acquisition of Cognitran enhanced and expanded Snap-on’s capabilities in providing shop efficiency solutions through integrated upstream services to OEM customers in automotive, heavy duty, agricultural and recreational applications.

On April 2, 2019, Snap-on acquired Power Hawk Technologies, Inc. (“Power Hawk”) for a cash purchase price of $7.9 million. Power Hawk, based in Rockaway, New Jersey, designs, manufactures and distributes rescue tools and related equipment for a variety of military, governmental, fire and rescue, and emergency operations. The acquisition of the Power Hawk product line complemented and increased Snap-on’s existing product offering and broadened its established capabilities in serving critical industries.

On January 25, 2019, Snap-on acquired substantially all of the assets of TMB GeoMarketing Limited (“TMB”) for a cash purchase price of $1.3 million. TMB, based in Dorking, U.K., designs planning software used by OEMs to optimize dealer locations and manage the performance of dealer outlets. The acquisition of TMB extended Snap-on’s product line in its core dealer network solutions business.

On January 31, 2018, Snap-on acquired substantially all of the assets of George A. Sturdevant, Inc. (d/b/a Fastorq) for a cash purchase price of $3.0 million. Fastorq, based in New Caney, Texas, designs, assembles and distributes hydraulic torque and hydraulic tensioning products for use in critical industries. The acquisition of the Fastorq product line complemented and increased Snap-on’s existing torque product offering and broadened its established capabilities in serving in critical industries.

Pro forma financial information has not been presented for any of these acquisitions as the net effects, individually and collectively, were neither significant nor material to Snap-on’s results of operations or financial position.

Information Available on the Company’s Website

Snap-on offers a broad line of products and complementary services that are grouped into three product categories: (i) tools; (ii) diagnostics, information and management systems; and (iii) equipment. Further product line information is not presented as it is not practicable to do so. The following table shows the consolidated net sales of these product categories for the last three years:

Snap-on supports the sale of its diagnostics and vehicle service shop equipment by offering training programs as well as after-sales support for its customers, primarily focusing on the technologies and the application of specific products developed and marketed by Snap-on.

Products are marketed under a number of brand names and trademarks, many of which are well known in the vehicle service and industrial markets served. Some of the major trade names and trademarks and the products and services with which they are associated include the following:

Financial Services

Snap-on also generates revenue from various financing programs that include: (i) installment sales and lease contracts arising from franchisees’ customers and Snap-on customers who require financing for the purchase or lease of tools and diagnostic and equipment products on an extended-term payment plan; and (ii) business and vehicle loans and vehicle leases to franchisees. The decision to finance through Snap-on or another financing source is solely by election of the customer. When assessing customers for potential financing, Snap-on considers various factors regarding ability to pay, including the customers’ financial condition, debt-servicing ability, past payment experience, and credit bureau and proprietary Snap-on credit model information, as well as the value of the underlying collateral.

Snap-on offers financing through SOC and the company’s international finance subsidiaries in most markets where Snap-on has franchise operations. Financing revenue from contract originations is recognized over the life of the underlying contracts, with interest or finance charges computed primarily on the average daily balances of the underlying contracts.

Snap-on markets and distributes its products and related services principally to professional tool and equipment users around the world. The two largest market sectors are the vehicle service and repair sector and the industrial sector.

Vehicle Service and Repair Sector

The vehicle service and repair sector has three main customer groups: (i) professional technicians who purchase tools and diagnostic and equipment products for use in their work; (ii) other professional customers related to vehicle repair, including owners and managers of independent repair shops and OEM dealerships who purchase tools and diagnostic and equipment products for use by multiple technicians within a service or repair facility; and (iii) OEMs.

Snap-on provides innovative tool, equipment and business solutions, as well as technical sales support and training, designed to meet technicians’ evolving needs. Snap-on’s mobile tool distribution system offers technicians the convenience of purchasing quality tools at their place of business with minimal disruption of their work routine. Snap-on also provides owners and managers of repair shops, where technicians work, with tools, diagnostic equipment, and repair and service information, including electronic parts catalogs and shop management products. Snap-on’s OEM facilitation business provides OEMs with products and services including special and essential tools as well as consulting and facilitation services, which include product procurement, distribution and administrative support to customers for their dealership equipment programs.

The vehicle service and repair sector is characterized by an increasing rate of technological change within motor vehicles, vehicle population growth and increasing vehicle life, and the resulting effects of these changes on the businesses of both our suppliers and customers. Snap-on believes it is a meaningful participant in the vehicle service and repair market sector.

Industrial Sector

Snap-on markets its products and services globally to a broad cross-section of commercial and industrial customers, including maintenance and repair operations; manufacturing and assembly facilities; various government agencies, facilities and operations, including military operations; schools with vocational and technical programs; aviation and aerospace operations; oil and gas developers; mining operations; energy and power generation operations; equipment fabricators and operators; railroad manufacturing and maintenance; customers in agriculture; infrastructure construction companies; and other customers that require instrumentation, service tools and/or equipment for their products and business needs. The industrial sector for Snap-on focuses on providing value-added products and services to an increasingly expanding global base of customers in critical industries.

The industrial sector is characterized by a highly competitive environment with multiple suppliers offering either a full line or industry specific portfolios for tools and equipment. Industrial customers increasingly require specialized solutions that provide repeatability and reliability in performing tasks of consequence that are specific to the particular end market in which they operate. Snap-on believes it is a meaningful participant in the industrial tools and equipment market sector.

Snap-on serves customers primarily through the following channels of distribution: (i) the mobile van channel; (ii) company direct sales; (iii) distributors; and (iv) e-commerce. The following discussion summarizes Snap-on’s general approach for each channel and is not intended to be all-inclusive.

Mobile Van Channel

In the United States, a significant portion of sales to the vehicle service and repair sector is conducted through Snap-on’s mobile franchise van channel. Snap-on’s franchisees primarily serve vehicle repair technicians and vehicle service shop owners, generally providing weekly contact at the customer’s place of business. Franchisees’ sales are concentrated in hand and power tools, tool storage products, shop equipment, and diagnostic and repair information products, which can be transported in a van or trailer and demonstrated during a sales call. Franchisees purchase Snap-on’s products at a discount from suggested list prices and resell them at prices established by the franchisee. U.S. franchisees are provided a list of calls that serves as the basis of the franchisee’s sales route. Snap-on’s franchisees also have the opportunity to add a limited number of additional franchises.

Snap-on charges nominal initial and ongoing monthly franchise fees. Franchise fee revenue, including nominal, non-refundable initial and ongoing monthly fees (primarily for sales and business training, and marketing and product promotion programs)programs, and technology support), is recognized as the fees are earned. Franchise fee revenue totaled $16.2 million, $15.4 million $16.2 million and $15.2$16.2 million in fiscal 2020, 2019 2018 and 2017,2018, respectively.

Snap-on also has a company-owned route program that is designed to: (i) provide another pool of potential field organization personnel; (ii) service customers in select new and/or open routes not currently serviced by franchisees; and (iii) allow Snap-on to pilot new sales and promotional ideas prior to introducing them to franchisees. As of 20192020 year end, company-owned routes comprised approximately 4% of the total route population. Snap-on may elect to increase or reduce the number of company-owned routes in the future.

In addition to its mobile van channel in the United States, Snap-on has replicated its U.S. franchise distribution modelmodels in certain other countries, including Canada, the United Kingdom, Japan, Australia, Germany, Netherlands, South Africa, New Zealand, Belgium and Ireland. In many of these markets, as in the United States, purchase decisions are generally made or influenced by professional vehicle service technicians as well as repair shop owners and managers. As of 20192020 year end, Snap-on’s worldwide route count was approximately 4,800,4,775, including approximately 3,4503,425 routes in the United States.

Through SOC, financing is available to U.S. franchisees, including financing for van leases, working capital loans and loans to help enable new franchisees to fund the purchase of the franchise or the expansion of an existing franchise. In many international markets, Snap-on offers a variety of financing options to its franchisees and/or customer networks through its international finance subsidiaries. The decision to finance through Snap-on or another financing source is solely at the customer’s election.

Snap-on supports its franchisees with a field organization of regional offices, franchise performance teams, customer care centers and distribution centers. Snap-on also provides sales and business training, and marketing and product promotion programs, as well as customer and franchisee financing programs through SOC and the company’s international finance subsidiaries, all of which are designed to strengthen franchisee sales. National Franchise Advisory Councils in the United States, the United Kingdom, Canada and Australia, composed primarily of franchisees that are elected by franchisees, assist Snap-on in identifying and implementing enhancements to the franchise program.

Company Direct Sales

A significant proportion of shop equipment sales in North America under the John Bean, Hofmann, Blackhawk, Car-O-Liner, Challenger and Pro-Cut brands, diagnostic products under the Snap-on brand, and information and shop management products under the Mitchell1 brand are made by direct and independent sales forces that have responsibility for national and other accounts. As the vehicle service and repair sector consolidates (with more business conducted by national chains and franchised service centers), Snap-on believes these larger organizations can be serviced most effectively by sales people who can demonstrate and sell the full line of diagnostic and equipment products and services. Snap-on also sells these products and services directly to OEMs and their franchised dealers.

Snap-on also sells software, services and solutions to the automotive, commercial, heavy duty, agriculture, power equipment and power sports segments. Products and services are marketed to targeted groups, including OEMs and their dealerships, fleets and individual repair shops. To effectively reach OEMs, which frequently have a multi-national presence, Snap-on has deployed focused business teams globally.

Distributors

Sales of certain tools and equipment are made through independent distributors who purchase the items from Snap-on and resell them to end users. Hand tools sold under the BAHCO, Irimo, Lindström, CDI, ATI, Fastorq, Norbar, Sioux, Sturtevant Richmont and Williams brands and trade names, for example, are sold through distributors worldwide. Wheel service and other vehicle service equipment are sold through distributors primarily under brands including Hofmann, John Bean, Car-O-Liner, Challenger, Pro-Cut, Cartec, Blackhawk and Ecotechnics. Diagnostic and equipment products are marketed through distributors in South America and Asia, and through both a direct sales force and distributors in Europe under the Snap-on, Sun and Blue-Point brands.

E-commerce

Snap-on competes on the basis of its product quality and performance, product line breadth and depth, service, brand awareness and imagery, technological innovation and availability of financing (through SOC or its international finance subsidiaries). While Snap-on does not believe that any single company competes with it across all of its product lines and distribution channels, various companies compete in one or more product categories and/or distribution channels.

Snap-on believes it is a leading manufacturer and distributor of professional tools, tool storage, diagnostic and equipment products, and repair software and solutions, offering a broad line of these products to both vehicle service and industrial marketplaces. Various competitors target and sell to professional technicians in the vehicle service and repair sector through the mobile tool distribution channel. Snap-on also competes with companies that sell tools and equipment to vehicle service and repair technicians online and through retail stores, vehicle parts supply outlets and tool supply warehouses/distributorships. Within the power tools category and the industrial sector, Snap-on has various other competitors, including companies with offerings that overlap with other areas discussed herein. Major competitors selling diagnostics, shop equipment and information to vehicle dealerships and independent repair shops include OEMs and their proprietary electronic parts catalogs and diagnostics and information systems, and other companies that offer products serving this sector.

Snap-on’s supply of raw materials and purchased components are generally and readily available from numerous suppliers. Snap-on believes it has secured an ample supply of both bar and coil steel for the near future to ensure stable supply to meet material demands. The company does not currently anticipate experiencing any significant impact in 20202021 from steel pricing or availability issues, though it is continuing to monitor the impact of tariffs and other trade protection measures put in place by the U.S. and other countries.

Patents, Trademarks and Other Intellectual Property

Snap-on vigorously pursues and relies on patent protection to protect its intellectual property and position in its markets. As of 20192020 year end, Snap-on and its subsidiaries held approximately 780800 active and pending patents in the United States and approximately 2,1502,350 active and pending patents outside of the United States. Sales relating to any single patent did not represent a material portion of Snap-on’s revenues in any of the last three years.

Examples of products that have features or designs that benefit from patent protection include hand tools (including sealed ratchets and ratcheting screwdrivers), power tools, wheel alignment systems, wheel balancers, tire changers, vehicle lifts, tool storage, tool control, collision measurement, test lanes,lane equipment, brake lathes, electronic torque instruments, emissions-sensing devices and diagnostic equipment.

Much of the technology used in the manufacture of vehicle service tools and equipment is in the public domain. Snap-on relies primarily on trade secret protection to protectfor proprietary processes used in manufacturing. Methods and processes are patented when appropriate. Copyright protection is also utilized when appropriate.

Trademarks used by Snap-on are of continuing importance to Snap-on in the marketplace. Trademarks have been registered in the United States and many other countries, and additional applications for trademark registrations are pending. Snap-on vigorously polices proper use of its trademarks. Snap-on’s right to manufacture and sell certain products is dependent upon licenses from others; however, these products under license do not represent a material portion of Snap-on’s net sales.

Domain names have becomeare a valuable corporate asset for companies around the world, including Snap-on. Domain names often contain a trademark or service mark or even a corporate name and are often considered intellectual property. The recognition and value of the Snap-on name, trademark and domain name are core strengths of the company.

Snap-on strategically licenses the Snap-on brand to carefully selected manufacturing and distribution companies for items such as apparel and a variety of other goods, in order to further build brand awareness and market presence for the company’s strongest brand.

Snap-on is subject to various environmental laws, ordinances, regulations, and other requirements of government authorities in the United States and other nations. At Snap-on, these environmental liabilities are managed through the Snap-on Environmental, Health and Safety Management System (“EH & SMS”), which is applied worldwide. The system is based upon continual improvement and is certified to ISO 14001:2015 and OHSAS 18001:2007, verified through Det Norske Veritas (DNV) Certification, Inc.

Snap-on believes that it complies with applicable environmental controland government requirements in its operations. Expenditures on environmental and governmental matters through EH & SMS have not had, and Snap-on does not for the foreseeable future expect them to have, a material effect upon Snap-on’s capital expenditures, earnings or competitive position.

As of January 2, 2021, Snap-on employed approximately 12,80012,300 people atworldwide, of which approximately 6,800 were employed in the end of January 2020United States and 12,600 people atapproximately 5,500 were outside the end of January 2019. The year-over-year increase inUnited States. Approximately 2,600 employees reflects acquisitions during 2019.

In evaluating the company, careful consideration should be given to the following risk factors, in addition to the other information included in this Annual Report on Form 10-K, including the Consolidated Financial Statements and the related notes. Each of these risk factors could adversely affect the company’s business, operating results, cash flows and/or financial condition, as well as adversely affect the value of an investment in the company’s common stock.

Economic conditionsRisk related to COVID-19 and world events could affectOther Infectious Diseases

To the extent the COVID-19 pandemic, or a future outbreak, adversely affects our business, financial condition, results of operations and cash flows, it may also heighten many of the other risks described in this section. The ultimate impact of COVID-19, as well as future outbreaks of infectious diseases, on our business, results of operations, financial condition and cash flows is dependent on future developments, including the duration of the pandemic and the related length of its impact on the global economy, which are uncertain and cannot be predicted at this time.

We believe sales of many of our products are dependent on the changing vehicle repair requirements, the number of vehicles on the road, the general aging of vehicles and the number of miles driven. These factors affect the frequency, type and amount of service and repair performed on vehicles by technicians, and therefore affect the demand for the number of technicians, the prosperity of technicians and, consequently, the demand technicians have for our tools, other products and services, as well as the value technicians place on those products and services. The use of other methods of transportation, including more frequent use of public transportation in the future, could result in a decrease in the use of privately operated vehicles. A decrease in the use of privately operated vehicles may reduce the level of future customer orderslead to fewer repairs and less demand for our profitability.products.

Approximately 40%42% of our consolidated net revenues in 20192020 were generated by the Snap-on Tools Group, which consists of Snap-on’s business operations primarily serving vehicle service and repair technicians through the company’s worldwide mobile tool distribution channel. Snap-on’s success is dependent on its relationships with franchisees, individually and collectively, as they are the primary sales and service link between the company and vehicle service and repair technicians, who are an important class of end users for Snap-on’s products and services.

If our franchisees are not successful, or if we do not maintain an effective relationship with our franchisees, the delivery of products, the collection of receivables and/or our relationship with end users could be adversely affected and thereby negatively impact our business, financial condition, results of operations and cash flows.

In addition, if we are unable to maintain effective relationships with franchisees, Snap-on or the franchisees may choose to terminate the relationship, which may result in: (i) open routes, in which end-user customers are not provided reliable service; (ii) litigation resulting from termination; (iii) reduced collections or increased charge-offs of franchisee receivables owed to Snap-on; and/or (iv) reduced collections or increased charge-offs of finance and contract receivables.

An integral component of our business and profitability is our ability to offer competitive financing alternatives to franchisees and other end-user customers. The lack of our ability to offer such alternatives or obtain capital resources or other financing to support our receivables on terms that we believe are attractive, whether resulting from the state of the financial markets, our own operating performance, or other factors, would negatively affect our operating results and financial condition. Adverse fluctuations in interest rates and/or our ability to provide competitive financing programs could also have an adverse impact on our revenue and profitability.

The maximum available credit under our multi-currency revolving credit facility is $800 million. The company’s leverage ratio may affect both our availability of additional capital resources as well as our operations in several ways, including:

While we believe we will have the ability to service our debt and obtain additional resources in the future if and when needed, that will depend upon our results of operations and financial position at the time, the then-current state of the credit and financial markets, and other factors that may be beyond our control. Therefore, we cannot give assurances that credit will be available on terms that we consider attractive, or at all, if and when necessary or beneficial to us.

The company’s pension plan expense is comprised of the following factors: (i) service cost; (ii) interest on projected benefit obligations; (iii) expected return on plan assets; (iv) the amortization of prior service costs and credits; (v) effects of actuarial gains and losses; and (vi) settlement/curtailment costs, when applicable. The accounting for pensions involves the estimation of a number of factors that are highly uncertain. Certain factors, such as the interest on projected benefit obligations and the expected return on plan assets, are impacted by changes in market interest rates and the value of plan assets. A significant decrease in market interest rates and a decrease in the fair value of plan assets would increase net pension expense and may adversely affect the company’s future results of operations. See Note 12 to the Consolidated Financial Statements for further information technology infrastructureon the company’s pension plans.

We have a substantial amount of goodwill and purchased intangible assets, almost all of which are criticalbooked in the Commercial & Industrial Group and in the Repair Systems & Information Group. We are required to supporting business objectives; failureperform impairment tests on our goodwill and other intangibles annually or at any time when events occur that could impact the value of our systems to operate effectively could adversely affectbusiness segments. Our determination of whether impairment has occurred is based on a comparison of each of our reporting units’ fair market value with its carrying value.

Significant and unanticipated changes in circumstances, such as significant and long-term adverse changes in business and reputation.

Legal and could also damageRegulatory Risks

Financial services businesses of all kinds are subject to significant and complex regulations and enforcement. In addition to potentially increasing the costs and other requirements of doing business due to compliance obligations, new laws and regulations, or changes to existing laws and regulations, as well as the enforcement thereof, may affect the relationships between creditors and debtors, inhibit the rights of creditors to collect amounts owed to them, expand liability for certain actions or inactions,inaction, or limit the types of financial products or services offered, any or all of which could have a material adverse effect on our financial condition, results of operations and cash flows. Failure to comply with any of these laws or regulations could also result in civil, criminal, monetary and/or non-monetary penalties, damage to our reputation, and/or the incurrence of remediation costs.

The products that we design and/or manufacture, and/or the services we provide, can lead to product liability claims or other legal claims being filed against us. To the extent that plaintiffs are successful in showing that a defect in a product’s design, manufacture or warnings led to personal injury or property damage, or that our provision of services resulted in similar injury or damage, we may be subject to claims for damages. Although we are insured for damages above a certain amount, we bear the costs and expenses associated with defending claims, including frivolous lawsuits, and are responsible for damages up to the insurance retention amount. In addition to claims concerning individual products, as a manufacturer, we can be subject to costs, potential negative publicity and lawsuits related to product recalls, which could adversely impact our results of operations and damage our reputation.

From time to time we are subject to legal disputes that are being litigated and/or settled in the ordinary course of business. Disputes or future lawsuits could result in the diversion of management’s time and attention away from business operations. Additionally, negative developments with respect to legal disputes and the costs incurred in defending ourselves, even if successful, could have an adverse impact on the company and its reputation. Successful outcomes, at trial or on appeal, can never be assured. Adverse outcomes or settlements could also require us to pay damages, potentially in excess of amounts reserved, or incur liability for other remedies that could have a material adverse effect on our business, reputation, financial condition, results of operations and cash flows.

Certain of our operations are subject to environmental laws and regulations in the jurisdictions in which they operate, which impose limitations on the discharge of pollutants into the ground, air and water and establish standards for the generation, treatment, use, storage and disposal of hazardous wastes. We must also comply with various health and safety regulations in the United States and abroad in connection with our operations. Failure to comply with any of these laws could result in civil and criminal, monetary and non-monetary penalties and damage to our reputation. In addition, we may incur costs related to remedial efforts or alleged environmental damage associated with past or current waste disposal practices. We cannot provide assurance that our costs of complying with current or future environmental protection and health and safety laws will not exceed our estimates.

We conduct business in many countries, which requires us to interpret the income tax laws and rulings in each of those taxing jurisdictions. Due to the subjectivity of tax laws in and between those jurisdictions, as well as the subjectivity of factual interpretations, our estimates of income tax liabilities may differ from actual payments or assessments. Claims from taxing authorities related to these differences could have an adverse impact on our financial condition, results of operations and cash flows.

In addition to attract, retainthe specific risks above, we, our franchisees and effectively manage qualified personnel could lead toour customers, may be adversely affected by changing economic conditions, including conditions that may particularly impact specific regions. These conditions may result in reduced consumer and investor confidence, instability in the credit and financial markets, volatile corporate profits, and reduced business and consumer spending. We, our franchisees and our customers, and the economy as a loss of revenue and/whole, also may be affected by future world or profitability.

None.

Snap-on maintains leased and owned manufacturing, software development, warehouse, distribution, research and development and office facilities throughout the world. Snap-on believes that its facilities currently in use are suitable and have adequate capacity to meet its present and foreseeable future demand. Snap-on’s facilities in the United States occupy approximately 3.83.9 million square feet, of which 74%75% is owned, including its corporate and general office facility located in Kenosha, Wisconsin. Snap-on’s facilities outside the United States occupy approximately 4.64.5 million square feet, of which approximately 73% is owned. Certain Snap-on facilities are leased through operating and finance lease agreements. See Note 1617 to the Consolidated Financial Statements for information on the company’s operating and finance leases. Snap-on management continually monitors the company’s capacity needs and makes adjustments as dictated by market and other conditions.

Item 3: Legal Proceedings

Snap-on is involved in various legal matters that are being litigated and/or settled in the ordinary course of business. Although it is not possible to predict the outcome of these legal matters, management believes that the results of these legal matters will not have a material impact on Snap-on’s consolidated financial position, results of operations or cash flows.

Not applicable.

Snap-on had 54,650,22454,102,099 shares of common stock outstanding as of 20192020 year end. Snap-on’s stock is listed on the New York Stock Exchange under the ticker symbol “SNA.” At February 7, 2020,5, 2021, there were 4,5404,400 registered holders of Snap-on common stock.

Issuer Purchases of Equity Securities

The following chart discloses information regarding the shares of Snap-on’s common stock repurchased by the company during the fourth quarter of fiscal 2019,2020, all of which were purchased pursuant to the Board’s authorizations that the company has publicly announced. Snap-on has undertaken stock repurchases from time to time to offset dilution created by shares issued for employee and franchisee stock purchase plans, and equity plans, and for other corporate purposes, as well as when the company believes market conditions are favorable. The repurchase of Snap-on common stock is at the company’s discretion, subject to prevailing financial and market conditions.

Other Purchases or Sales of Equity Securities

The following chart discloses information regarding transactions in shares of Snap-on’s common stock by Citibank, N.A. (“Citibank”) during the fourth quarter of 20192020 pursuant to a prepaid equity forward agreement (the “Agreement”) with Citibank that is intended to reduce the impact of market risk associated with the stock-based portion of the company’s deferred compensation plans. The company’s stock-based deferred compensation liabilities, which are impacted by changes in the company’s stock price, increase as the company’s stock price rises and decrease as the company’s stock price declines. Pursuant to the Agreement, Citibank may purchase or sell shares of the company’s common stock (for Citibank’s account) in the market or in privately negotiated transactions. The Agreement has no stated expiration date and does not provide for Snap-on to purchase or repurchase its shares.

The graph below illustrates the cumulative total shareholder return on Snap-on common stock since December 31, 2014,2015, of a $100 investment, assuming that dividends were reinvested quarterly. The graph compares Snap-on’s performance to that of the Standard & Poor’s 500 Industrials Index (“S&P 500 Industrials”) and Standard & Poor’s 500 Stock Index (“S&P 500”).

Item 6: Selected Financial Data

The selected financial data presented below has been derived from, and should be read in conjunction with, the respective historical consolidated financial statements of the company, including the notes thereto, and “Part II, Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

WeIn 2020, the COVID-19 pandemic impacted the company’s sales and earnings as a result of decreased activity in the first half of the year. By safely pursuing opportunities in the COVID-19 environment, we believe our 20192020 operating results demonstrate our continued commitment to providing repeatability and reliability to a wide range of professional customers performing critical and essential tasks in workplaces of consequence, while managing headwinds in certain end markets and geographies, particularly in Europe.consequence. Leveraging capabilities already demonstrated in the automotive repair arena, our “coherent growth” strategy focusescontinued to focus on developing and expanding our professional customer base, not only in automotive repair, but in adjacent markets, additional geographies and other areas, including in critical industries, where the cost and penalties for failure can be high. Snap-on’s value proposition of making work easier for serious professionals is an ongoing strength as we move forward along our runways for coherent growth:

Our strategic priorities and plans for 20202021 involve continuing to build on our Snap-on Value Creation Processes – our suite of strategic principles and processes we employ every day designed to create value, and employed in the areas of safety, quality, customer connection, innovation and rapid continuous improvement (“Rapid Continuous Improvement” or “RCI”). We expect to continue to deploy these processes in our existing operations as well as into our recently acquired businesses.

Snap-on’s RCI initiatives employ a structured set of tools and processes across multiple businesses and geographies intended to eliminate waste and improve operations. Savings from Snap-on’s RCI initiatives reflect benefits from a wide variety of ongoing efficiency, productivity and process improvements, including savings generated from product design cost reductions, improved manufacturing line set-up and change-over practices, lower-cost sourcing initiatives and facility consolidations. Unless individually significant, it is not practicable to disclose each RCI activity that generated savings and/or segregate RCI savings embedded in sales volume increases.

Our global financial services operations continue to serve a significant strategic role in offering financing options to our franchisees, to their customers, and to customers in other parts of our business. We expect that our global financial services business, which includes both Snap-on Credit LLC (“SOC”) in the United States and our other international finance subsidiaries, will continue to be a meaningful contributor to our operating earnings going forward.

Snap-on has significant international operations and is subject to risks inherent with foreign operations, including foreign currency translation fluctuations.

On September 28, 2020, Snap-on acquired substantially all of the assets of AutoCrib, Inc. (“AutoCrib”) for a cash purchase price of $35.4 million. AutoCrib, based in Tustin, California, designs, manufactures and markets asset and tool control solutions. The acquisition of AutoCrib complemented and expanded Snap-on’s existing tool control offering to customers in a variety of industrial applications, including aerospace, automotive, military, natural resources and general industry.

On August 7, 2019, Snap-on acquired Cognitran Limited (“Cognitran”) for a preliminary cash purchase price of $30.4$30.6 million (or $29.4$29.6 million, net of cash acquired). The preliminary purchase price is subject to change based upon finalization of, which reflects a $0.2 million working capital adjustment that is expected to be completedfinalized in the first quarter offiscal 2020. Cognitran, based in Chelmsford, U.K., specializes in flexible, modular and highly scalable “Software as a Service” (SaaS) products for Original Equipment Manufacturer (“OEM”) customers and their dealers, focused on the creation and delivery of service, diagnostics, parts and repair information to the OEM dealers and connected vehicle platforms. The acquisition of Cognitran enhanced and expanded Snap-on’s capabilities in providing shop efficiency solutions through integrated upstream services to OEM customers in automotive, heavy duty, agricultural and recreational applications.

On April 2, 2019, Snap-on acquired Power Hawk Technologies, Inc. (“Power Hawk”) for a cash purchase price of $7.9 million. Power Hawk, based in Rockaway, New Jersey, designs, manufactures and distributes rescue tools and related equipment for a variety of military, governmental, fire and rescue, and emergency operations. The acquisition of the Power Hawk product line complemented and increased Snap-on’s existing product offering and broadened its established capabilities in serving critical industries.

Pro forma financial information has not been presented for any of these acquisitions as the net effects, individually and collectively, were neither significant nor material to Snap-on’s results of operations or financial position. 

Non-GAAP Measures

References in this Management’s Discussion and Analysis of Financial Condition and Results of Operations to “organic sales” refer to sales from continuing operations calculated in accordance with generally accepted accounting principles in the United States of America (“GAAP”), excluding acquisition-related sales and the impact of foreign currency translation. Management evaluates the company’s sales performance based on organic sales growth, which primarily reflects growth from the company’s existing businesses as a result of increased output, customer base and geographic expansion, new product development and/or pricing, and excludes sales contributions from acquired operations the company did not own as of the comparable prior-year reporting period. The company’s organic sales disclosures also exclude the effects of foreign currency translation as foreign currency translation is subject to volatility that can obscure underlying business trends. Management believes that the non-GAAP financial measure of organic sales is meaningful to investors as it provides them with useful information to aid in identifying underlying growth trends in our businesses and facilitating comparisons of our sales performance with prior periods.

Snap-on’s 2020 fiscal year contained 53 weeks of a net expenseoperating results with the extra week occurring in the fourth quarter. Snap-on’s 2019 and 2018 fiscal years each contained 52 weeks of $13.7 million for the one-time transition tax and a net benefit of $6.7 million related to revaluation of deferred tax assets and liabilities, caused by the new lower corporate tax rate. To determine the transition tax, the company determined the amount of post-1986 accumulated earnings and profits of the relevant subsidiaries, as well as the amount of non-U.S. income taxes paid on such earnings. While the company was able to make a reasonable estimate of the transition tax for 2017, it continued to gather additional information to more precisely compute the final amount reported on its 2017 U.S. federal tax return which was filed in October 2018.operating results. The actual transition tax was $8.3 million greater than the company’s initial estimate and was included in income tax expense for 2018. Likewise, while the company was able to make a reasonable estimate of the impact of the reductionadditional week of operations in fiscal 2020 was not material to the corporate tax rate, it was affected by other analyses related to the Tax Act, including, but not limited to, the state tax effect of adjustments made to federal temporary differences. During 2018, the company recorded additionalSnap-on’s full year or fourth quarter total revenues or net tax benefits of $4.4 million attributable to pension contributions made in 2018 that were deductible for 2017 at the higher 35% federal tax rate and other changes to the 2017 tax provision related to the Tax Act and subsequently-issued tax guidance. Due to the complexity of the new GILTI tax rules, the company continued to evaluate this provision of the Tax Act and the application of ASC 740 throughout 2018. Under GAAP, the company is allowed to make an accounting policy choice to either: (i) treat taxes due on future U.S. inclusions in taxable income related to GILTI as a current-period expense when incurred (the “period cost method”); or (ii) factor in such amounts into a company’s measurement of its deferred taxes (the “deferred method”). The company selected to apply the “period cost method” to account for the new GILTI tax, and treated it as a current-period expense for 2019 and 2018.earnings.