UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549

FORM 10-K

[x] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended August 31, 20142015

or

[_] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _________ to _________

Commission file number: 001-32046

Simulations Plus, Inc.
(Exact name of registrant as specified in its charter)

SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT:

SECURITIES REGISTERED PURSUANT TO SECTION 12(G) OF THE ACT: NONE

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes [   ][_] No [X]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes [   ][_] No [X]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filings requirements for the past 90 days days.

Yes [X] No [   ]

[_]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes [X] No [   ]

[_]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [  ]

[_]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [   ][_] No [X]

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant as of February 28, 2014,2015, based upon the closing price of the common stock as reported by The Nasdaq Stock Market on such date, was approximately $57,581,229.$65,494,887. This calculation does not reflect a determination that persons are affiliates for any other purposes.

As of November 26, 2014, 16,841,11418, 2015, 16,996,001 shares of the registrant’s common stock were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Certain portions of the registrant’s definitive proxy statement to be delivered to its shareholders in connection with the registrant’s 20152016 Annual Meeting of Shareholders are incorporated by reference into Part III of this Form 10-K. Such definitive proxy statement will be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year covered by this annual report.report on Form 10-K.

Simulations Plus, Inc.
FORM 10-K
For the Fiscal Year Ended August 31, 20142015

Table of Contents

Page

Forward-Looking Statements

This document and the documents incorporated in this document by reference contain forward-looking statements that are subject to risks and uncertainties. All statements other than statements of historical fact contained in this document and the materials accompanying this document are forward-looking statements.

The forward-looking statements are based on the beliefs of our management, as well as assumptions made by, and information currently available to, our management. Frequently, but not always, forward-looking statements are identified by the use of the future tense and by words such as “believes,” expects,” “anticipates,” “intends,” “will,” “may,” “could,” “would,” “projects,” “continues,” “estimates” or similar expressions. Forward-looking statements are not guarantees of future performance and actual results could differ materially from those indicated by the forward-looking statements. Forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause our or our industry’s actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by the forward-looking statements.

The forward-looking statements contained or incorporated by reference in this document are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (“Securities Act”) and Section 21E of the Securities Exchange Act of 1934, as amended (“Exchange Act”), and are subject to the safe harbor created by the Private Securities Litigation Reform Act of 1995. These statements include declarations regarding our plans, intentions, beliefs or current expectations.

Among the important factors that could cause actual results to differ materially from those indicated by forward-looking statements are the risks and uncertainties described under “Risk Factors” in our other filings with the Securities and Exchange Commission (“SEC”).

Forward-looking statements are expressly qualified in their entirety by this cautionary statement. The forward-looking statements included in this document are made as of the date of this document and we do not undertake any obligation to update forward-looking statements to reflect new information, subsequent events or otherwise, except as required by law.

PART I

ITEM 1 – BUSINESS–BUSINESS

As used in this report, each of the terms “we,” “us,” “our,” the “Company” and “Simulations Plus” refers to Simulations Plus, Inc. and Cognigen Corporation, unless otherwise stated or the context otherwise requires.

OVERVIEW

Simulations Plus, Inc., incorporated in 1996, is a premier developer of groundbreaking drug discovery and development software for mechanistic modeling and simulation. Our software is licensed to major pharmaceutical, biotechnology, agrochemical, and food industry companies and to regulatory agencies worldwide for use in the conduct of industry-based research. We also provide consulting services ranging from early drug discovery through preclinical and clinical trial data analysis and reporting to these industries.regulatory agencies. Recently, we have been exploring the application of some of our machine-learning technologies for problems in aerospace and healthcare outside of our traditional markets. Simulations Plus is headquartered in Southern California, with offices in Buffalo, New York, and its common stock trades on the NASDAQ Capital Market under the symbol “SLP.”

After the end of our 2014 fiscal year, inIn September 2014, Simulations Plus acquired Cognigen Corporation (Cognigen) as a wholly owned subsidiary. The acquisition is expectedwholly-owned subsidiary pursuant to add approximately $5 million to our revenues for the fiscal year ended August 31, 2015.

that certain Agreement and Plan of Merger dated as of July 23, 2014 by and between Simulations Plus and Cognigen (Merger Agreement). Cognigen, originally incorporated in 1992, is a leading provider of population modeling and simulation contract research services for the pharmaceutical and biotechnology industries. Cognigen’s clinical pharmacology-basedclinical-pharmacology-based consulting services include pharmacokinetic and pharmacodynamic modeling, clinical trial simulations, data programming, and technical writing services in support of regulatory submissions. Cognigen developsalso has developed software for harnessing cloud-based computing in support of modeling and simulation activities and secure data archiving, and provides consulting services to improve interdisciplinary collaborations and R&D productivity.

We are a global leader focused on improving the ways scientists use knowledge and data to predict the properties and outcomes of pharmaceutical and biotechnology agents, and one of only two global companies who provide a wide range of preclinical and clinical consulting services and software. Our innovations in integrating new and existing science in medicinal chemistry, computational chemistry, pharmaceutical science, biology, and physiology into our software have made us the leading software provider for physiologically based pharmacokinetics (PBPK) modeling and simulation.

We generate revenue by delivering relevant, cost-effective software and creative and insightful consulting services. Pharmaceutical and biotechnology companies use our software programs and scientific knowledge to guide discovery, preclinical, and preclinicalclinical development programs. They also use it to enhance their understanding of the properties of potential new medicines and to use emerging data to improve formulations, select and justify dosing regimens, support the generics industry, optimize clinical trial design, and simulate outcomes in special populations, such as the elderly and pediatric patients.

PRODUCTS

General

Simulations Plus develops and produces software for use in pharmaceutical research and in the education of pharmacy and medical students, as well as provides contract consulting services to the pharmaceutical and chemical industries. Our wholly owned subsidiary, Cognigen, conducts high-quality analysis and regulatory report generation for data gathered during clinical trials of new and existing pharmaceutical products. Cognigen also has developed a proprietary software product called KIWI™ which is used internally and by some of its customers to access data and analysis results on Cognigen’s internal computer cloud. Each business division is discussed separately below, followed by a discussion of the expected synergies from the combination of Simulations Plus and Cognigen.

Simulations Plus

We currently offer sixseven software products for pharmaceutical research:research and development: three simulation programs that provide time-dependent results based on solving large sets of differential equations: GastroPlus™, DDDPlus™, and MembranePlus™; and three programs that are based on predicting and analyzing static (not time-dependent) properties of chemicals: ADMET Predictor™, MedChem Designer™, and MedChem Studio™. We call the (the combination of ADMET Predictor, MedChem Designer, and MedChem Studio is called our ADMET Design Suite™); and one program that supports data analysis and reporting through our proprietary secure cloud called KIWI™. After years in development, MembranePlus was released inOn October 2014 after15, 2015 we announced the closeupcoming release of the currenta new software product called PKPlus™ for noncompartmental pharmacokinetic analysis and reporting, period.which is further described below.

GastroPlus

Our flagship product and currently our largest source of revenuesrevenue is GastroPlus. GastroPlus simulates the absorption, pharmacokinetics, and pharmacodynamics of drugs administered to humans and animals, and is currently the most widely used software of its type inby pharmaceutical companies, the U.S. Food and Drug Administration (FDA), the U.S. National Institutes of Health (NIH), and other government agencies in the U.S. and other countries. The FDA recently added 50 additional GastroPlus licenses to the 20 it already had, bringing the total to 70. Because of the widespread use of GastroPlus, we were the only non-European company invited to join the European Innovative Medicines Initiative (IMI) program for Oral Bioavailability Tools (OrBiTo). OrBiTo is an international collaboration among 27 industry, academic, and government organizations working in the area of oral absorption of pharmaceutical products. Because we are outside of Europe, our participation in this project is at our own expense, while other members are compensated for their work; however, we are a full member with access to all of the data and discussions of all other members. We believe participation in this initiative enables us to benefit from and to contribute to advancing the prediction of human oral absorptionbioavailability from preclinical data, and ensures that we are in front of the audience of member pharmaceutical companies and regulatory agencies.

After the end of our 2014 fiscal year, inIn September 2014 we entered into a research collaboration agreement (RCA) with the FDA to enhance the Ocular Compartmental Absorption and Transit (OCAT™) model within the Additional Dosing Routes Module of GastroPlus to provide a tool for generic companies and the FDA to assess the likely bioequivalence of generic drug formulations dosed to the eye. Under this RCA, we receive $200,000 per year. This RCA may be renewed for up to a total of three years based on the progress achieved during the project. The RCA was renewed for a second year in September 2015.

Because we did not want our customersWe were awarded another RCA by the FDA in September 2015, this time to have to wait forexpand the next major release, an interim releasecapabilities of GastroPlus version 8.6,to simulate the dosing of long-acting injectable microspheres. This type of dosage form is usually injected via subcutaneous or intramuscular routes, but can also be used for ocular dosing. Once again, this RCA provides up to $200,000 per year for up to three years. Under this agreement, we will develop simulation models to deal with the slow dissolution/decomposition of the microsphere carrier material that gradually releases the actual drug over periods as long as weeks or months.

In April 2015, we released Version 9.0 of GastroPlus. This was releasedthe largest single upgrade we have made to the program to date, and the level of science and technology added valuable new functionalities that we believe provide the most advanced decision-making tool for preclinical and early clinical trial simulation and modeling analysis available today. Several of the significant enhancements include:

Our goal with GastroPlus is to integrate the best science into user-friendly software to enable pharmaceutical researchers and regulators to perform sophisticated analyses of complex drug behaviors in humans and laboratory animals. Already the most widely used program in the world for physiologically based pharmacokinetics (PBPK), the addition of minipig physiology – a species becoming common in preclinical research; and (2) the expansion of the Drug-Drug Interaction (DDI) Modulethese new capabilities is expected to include population simulations.

The next major release, version 9.0, is already in development. This version will add the ability to simulate dermal (through the skin) drug absorption from creams and ointments. This capability was developed through a funded collaboration with a top-5 pharmaceutical company, and is currently in use at the customer’s sites. A number of other improvements will be included in version 9.0 that will be announced with the release of the product, and which we believe will expand the market for GastroPlus in pharmaceuticaluser base earlier into the research and development. We currently expect release of version 9.0 in December 2014 or early in 2015.development process within the pharmaceutical industry, while also helping us further penetrate the biopharmaceuticals, food, cosmetics, and general toxicology markets.

DDDPlus

DDDPlus simulatesin vitro laboratory experiments used tothat measure the rate of dissolution of thea drug and, if desired, the additives (excipients) in a particular dosage form (e.g., tablet or capsule) under a variety of experimental conditions. This software program is used by formulation scientists in industry and the FDA to (1) understand the physical mechanisms affecting the dissolution rate for various formulations, (2) reduce the number of cut-and-try attempts to design new drug formulations, and (3) designin vitrodissolution experiments to better mimicin vivo conditions. A major upgrade to DDDPlus is in final stages of development and is currently expected to be released in the second quarter of fiscal year 2016.

MembranePlus™

MembranePlus is a new product that has been under development for a number of years, but was put on hold for several years due to other priorities. The development effort was revived in the past year and the program was released in October 2014 after the close of the current reporting period.2014. Similar to DDDPlus, MembranePlus simulates laboratory experiments, but in this case, the experiments are for measuring permeability of drug-like molecules through various membranes, including several different cell cultures (Caco-2, MDCK), as well as artificially formulated membranes (PAMPA). The value of such a simulation derives from the fact that when the permeabilities of the same molecules are measured in different laboratories, results are often significantly different. These differences are caused by a complex interplay of factors in how the experiment was set up and run. MembranePlus simulates these experiments with their specific experimental details, and this enables the scientistscientists to better interpret how results from specific experimental protocols can be used to predict permeability in human and animals, which is the ultimate goal. A few initial sales of MembranePlus have been made. Similar to DDDPlus ten years ago, this program is a very new concept that requires educating scientists on how and why to use it, and our marketing and sales program is tasked with providing that training.

PKPlus™

On October 15, 2015 we announced the upcoming release of a new standalone software product called PKPlus, based on the internal PKPlus Module in GastroPlus, first introduced in 2000. The PKPlus Module in GastroPlus provides quick and easy fitting of compartmental and noncompartmental analysis (NCA) pharmacokinetic models for oral and intravenous doses, but was not a tool that was designed to meet all of the requirements for generating these analyses and producing report-quality output for regulatory submissions. The new standalone PKPlus program is being developed to provide the full level of functionality needed by pharmaceutical industry scientists to generate the analyses and the outputs needed to satisfy regulatory agency requirements for both NCA and compartmental pharmacokinetics. The program has been in development for about 15 months, and is nearing completion and beta test. We believe MembranePlusthe potential number of users for PKPlus is uniquesignificant and that it has the potential to become one of our leading revenue producers. After introducing it at our Japan User Meeting and at the American Association of Pharmaceutical Scientists conference in Orlando, both in October, 2015, we received positive responses from current GastroPlus customers, have expressed interestsome of whom had encouraged us in the new capability.past to develop such a capability after using the PKPlus Module in GastroPlus.

ADMET Predictor™

ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) Predictor is a chemistry-based computer program that takes molecular structures as inputs and predicts approximately 145150 different properties for them at an average rate of over 100,000 compounds per hour.hour on a modern laptop computer. This capability allows chemists to generate estimates for a large number of important molecular properties without the need to synthesize and test the molecules, or to generate estimates of unknown properties for molecules that have been synthesized, but for which only a limited number of experimental properties have been measured. Thus, a chemist can assess the likely success of a large number of existing molecules in a company’s chemical library, as well as molecules that have never been made, by providing their molecular structures, either by drawing them using a tool such as our MedChem Designer software, or by automatically generating large numbers of molecules using various computer algorithms, including those embedded in our MedChem Studio software.

ADMET Predictor has been top-ranked for predictive accuracy in peer-reviewed, independent comparison studies, while generating its results at a high throughput rate. Although the state-of-the-art of this type of software does not enable identifying the best molecule in a series, it does allow early screening of molecules that are highly likely to fail as potential drug candidates (i.e., the worst molecules, which is usually the majority of a chemical library) before synthesizing and testing them. Thus, millions of compounds can be created and screened in a day, compared to potentially months or years of work to actually synthesize and test a much smaller number of actual compounds.

During fiscal year 2014, we released version 7.1This latest release of ADMET Predictor. ThisPredictor (version 7.2, released in May 2015) contains updated cytochrome P450 enzyme kinetics models that are seamlessly integrated into the recently released GastroPlus Version 9.0, enhancing the synergy between predicted properties and PBPK simulations. It also contains two new version incorporatesmodels related to human liver microsomal (HLM) stability, an experiment that is routinely run on newly synthesized compounds in the pharmaceutical industry. The updated models illustrate our commitment to providing the best predictive models in the industry.

We are now working on ADMET Predictor 8.0, which features a powerful new model for predicting ionization constants (pKa’s), developed inredesigned interface and a collaboration with Bayer AG that enabled us to more than double the size of our data set from about 16,000 pKa values to more than 35,000, and to expand the chemical space it covers to include a larger number of molecules more like thosenew capabilities to enhance the performance and user-friendliness of interestthe program. We expect to the pharmaceutical industry today. We believe the resulting improvement in pKa prediction will further differentiate our best-in-class model from any competitor.Predicting ionization is critical to predicting most other properties, so all of our models (approximately 144) were retrained based on this new capability forrelease version 7.1.8.0 by January 2016.

The ADMET Modeler™ subprogram that is integrated into ADMET Predictor enables scientists to use their own experimental data to quickly create proprietary high-quality predictive models using the same powerful modelingmachine learning methods we use to build our top-ranked property predictions. Pharmaceutical companies expend substantial time and money conducting a wide variety of experiments on new molecules each year, resulting in large databases of experimental data. Using this proprietary data to build predictive models can provide a second return on their investment; however, model building has traditionally been a difficult and tedious activity performed by specialists. The automation in ADMET Modeler makes it easy for a scientist to create very powerful models with a minimum ofminimal training.

We are currently examining two differentthree applications of this modeling engine:machine learning engine outside of our normal pharmaceutical markets: (1) building predictive models for missile aerodynamic force and moment coefficients as a function of missile geometry, Mach number, and angle of attack, (2) classifying/identifying missiles from radar tracking data, and (2)(3) classifying patients as healthy or experiencing some disease state or genetic disorder evidenced by magnetic resonance imaging (MRI) of the brain. Other potential applications for this modeling engine have also been identified; however, our focus to date has been in these twothree areas.

The aerodynamic coefficient prediction problem was identified by the aerospace engineering department at Auburn University. Working with them, we have done some preliminary testing of the ADMET Modeler modeling engine for this type of problem. Results have been encouraging, and we believe there are government agencies and industrial aerospace companies that will find such a capability to be useful. To this end, we are developing a prototype AEROModeler™ program to test this concept and to use as a demonstrator for proposal efforts directed to potential funding agencies. A joint Simulations Plus/Auburn University scientific poster was accepted for presentation at the National Space and Missile Material Symposium/Commercial and Government Responsive Access to Space Technology Exchange (NSMMS/CRASTE) ConferenceConferences in Huntsville, Alabama, in June 2014 and received attention and positivein Chantilly, VA in June 2015. Positive feedback from both government agencies and aerospace contractors was received at both meetings, not only for aerodynamic coefficient predictions, but also for application to several other potential problems of interest to the industry. We have also applied the same technology to identify/classify missiles from radar tracking data in a proof-of-concept study. Identification of missile characteristics from radar tracking data can be a valuable tool; for example, it can be used to rapidly determine whether defensive countermeasures are needed for an observed launch, and if so, what type(s) of countermeasures are most appropriate. We presented at two aerospace conferences in June 2015 to further demonstrate what our technology can do for these new applications.

The analysis of magnetic resonance imaging (MRI)MRI data to classify patients as healthy or (in our first proof-of-concept case) likely to experience a form of autism (in our first proof-of-concept case) has been developed in cooperation with the MRI facilityResearch Facility at Auburn University. This state-of-the-art facility has two MRIs –aMRI machines – a 3-Tesla machine and a 7-Tesla machine. The amount of data from MRI imaging is massive, requiring us to modify ourthe machine-learning code to handle much larger data arrays than our previous applications have required. Our current goal is to demonstrate the potential of our modeling technology to provide useful classification of a patient into one of the four groups based only on MRI data, so that we can approach various agencies (such as the NIH) to obtain funding to develop a commercial product. We presented a scientific poster at the Fourth Biennial Conference on Resting State/Brain Connectivity hosted byheld at the Massachusetts Institute of Technology in September 2014, thatwhich received interest from a number of researchers working in this area. We believe our artificial neural network ensemble modelingmachine-learning software engine has variousa wide variety of potential applications and we intend to pursue funding to develop customized tools based on the engine for a number of potential applications.them.

MedChem Designer™

MedChem Designer was launched in 2011. It was initially a molecule drawingmolecule-drawing program, or “sketcher”, but now has capabilities exceeding those of other molecule drawingmolecule-drawing programs because of its integration with both MedChem Studio and ADMET Predictor. We provide MedChem Designer for free to our customers because we believe that in the long run it will help to increase demand for ADMET Predictor and MedChem Studio, and because most other existing molecule drawingmolecule-drawing programs are also provided for free. Our free version includes a small set of ADMET PredictorPredictor’s best-in-class property predictions, allowing the chemist to modify molecular structures and then see a few key properties very quickly. With a paid ADMET Predictor license, the chemist would see the entire 145approximately 150 predictions that are available. Over 15,000 copies of MedChem Designer have been downloaded by scientists around the world.

When used with a license for ADMET Predictor, MedChem Designer becomes ade novo molecule design tool. With it, a researcher can draw one or more molecular structures, then click on the ADMET Predictor icon and have over 140approximately 150 properties for each structure calculated in seconds, including our proprietary ADMET Risk™ index. Researchers can also click on an icon to generate the likely metabolites of a molecule and then predict all of the properties of those metabolites from ADMET Predictor, including each of their ADMET Risk scores. This is important because a metabolite of a molecule can be therapeutically beneficial (or harmful) even though the parent molecule is not.

Our proprietary ADMET Risk score provides a single number that tells the chemist how many default threshold values for various predicted properties were crossed (or violated) by each structure. The default rules can be modified and new rules can be added by the user to include any desired rule set based on any combination of calculated descriptors, predicted properties, and user inputs. Thus, in a single number, the chemist can instantly compare the effects of different structural changes in many dimensions. The ideal score is zero; however, a low score greater than zero might be acceptable, depending on what property(s) caused the points to be assigned. If the number is too high (greater than 5-6), the molecule is not likely to be successful as a drug. As chemists attempt to modify structures to improve one property, they often cause others to become unacceptable. Without ADMET Risk, the chemist would have to individually examine many key properties for each new molecule (and its metabolites) to determine whether any of them became unacceptable as a result of changing the structure.

During fiscal year 2014, we released version 3.0 of MedChem Designer, which added the ability to capture the image of a molecular structure from a variety of publication files with a new snapshot tool, and then have the program automatically convert the graphic image into any of several computer-based chemical structure files. Converting from lines and letters on the screen to an exact chemical representation of the molecule (Optical Structure Recognition, or OSR) is a complex task. Although a few OSR programs are in existence, we are not aware of any that can accurately convert as many varieties of images to chemical representation as the OSR tool within MedChem Designer. Such a capability allows chemists to quickly capture molecular structures from the scientific literature to use for various purposes, including for use in our simulation and modeling software programs.

MedChem Studio™

MedChem Studio is a tool that is used both for data mining and forde novo design of new molecules. In its data-mining role, MedChem Studio facilitates searching of large chemical libraries to find molecules that contain identified substructures, and it enables rapid generation of clusters (classes) of molecules that share common substructures from high throughputhigh-throughput screening (HTS) data. MedChem Studio version 4.0 was released during fiscal year 2014.

While MedChem Designer can be used to refine a small number of molecules, MedChem Studio can be used to create and screen (with ADMET Predictor) a very large number of molecules down to a few promising lead candidates. MedChem Studio has features that enable it to generate new molecular structures using a variety ofde novo design methods. When MedChem Studio is used with ADMET Predictor and MedChem Designer (which we refer to as our ADMET Design Suite), we believe the programs provide an unmatched capability for chemists to search through large libraries of compounds that have undergone high-throughput screening experiments to find the most promising classes (groups of molecules with a large common part of their structures the same)structures) and molecules that are active against a particular target. In addition, MedChem Studio can take an interesting (but not acceptable) molecule and, using a variety of design algorithms, quickly generate many thousands to millions of high quality analogs (similar new molecules). These molecules can then be screened using ADMET Predictor to find molecules that are both active against the target as well as acceptable in a variety of ADMET properties.

NCE Projects

During late 2012, we initiated a new molecule (NCE, or New Chemical Entity) design project in which we used our own products to design novel molecules and have them synthesized and tested. Our goal was to demonstrate the ability of our ADMET Design Suite to generate new lead molecules in a fraction of the time and cost normally required in the pharmaceutical industry. We have conducted two NCE design projects. In the first, we designed molecules to test against the malaria parasite and in the other we designed molecules to test against the cyclo-oxygenase-2 (COX-2) enzyme that is the target for Celebrex®., while also inhibiting to a lesser extent the cyclo-oxygenase-1 (COX-1) enzyme that is the target for aspirin. Both projects were successful in that when the molecules that we designed were tested against the malaria parasite and the COX-2 enzyme, the moleculesCOX-2/COX-1 enzymes, every molecule successfully inhibited the malaria parasite andor the COX-2 enzyme.COX-2/COX-1 enzymes. We believe these projects demonstrate that our ADMET Design Suite can save considerable time and money in developing new lead compounds for particular targets.targets..

KIWI^TM

Drug development programs rely increasingly on modeling and simulation analyses to support decision-making and submissions to regulatory agencies. To ensure high-quality analyses, organizations must not only apply high-quality science, but must also be able to support the science by being able to validate the results. KIWI is a cloud-based web application that was developed to efficiently organize, process, maintain, and communicate the volume of data and results generated by pharmacologists and scientists over the duration of a drug development program. The validated workflow and tools within KIWI promote traceability and reproducibility of results.

The pharmaceutical industry has been rapidly adopting cloud technology as a solution to ever-expanding computer processing needs. Leveraging our 20-plus years of experience in providing an architecture supporting modeling and simulation efforts, we have developed KIWI as a secure, validated, enterprise-scale environment, enabling global teams to collaborate on model-based decision making. KIWI has proven to be a valuable platform for encouraging interdisciplinary discussions about the model development process and interpretation of results. We have generated revenue from new software sales that resulted from presenting our resultscontinue to receive positive feedback about the functionality implemented in KIWI and the value of the malaria parasite project.approach we have taken to harness cloud technology. We continue to improve functionality and collaboration within the KIWI platform. KIWI Version 1.3 was released in May 2015. This version of KIWI provides our user community with access to new features that accelerate completion of modeling projects by decreasing run times and facilitating the comparison and exporting of results across models. These features include dynamic comparisons of model parameter estimates and diagnostic plots, export of model run records for regulatory submissions, and accelerated infrastructure with the upgrade to the latest versions of NONMEM® and Perl-speaks-NONMEM running in a 64-bit Linux environment.

Contract Research and Consulting Services

Our employees have expertise in oral absorption and pharmacokinetics. They have been speakers or presenters at over 150 scientific meetings worldwide in the past four years. We frequently conduct contracted studies for large customers (including the largest five pharmaceutical companies) who have particularly difficult problems and who recognize our expertise in solving them, as well as for smaller customers who prefer to have studies run by our scientists rather than to license our software and train someone to use it. The demand for our consulting services has been steadily increasing, and we have expanded our Simulations Studies team to meet the increased workload. Our acquisition of Cognigen is expected to result in increased demand for the consulting services of both companies.

We currently are working with the FDA on three different RCAs: the onetwo for the ocular model and long-acting injectable microspheres in GastroPlus described above under “--GastroPlus,“GastroPlus,” and two moreanother one described below.

During fiscal year 2014, we continued to perform under our RCA with the FDA’s Center for Food Safety and Applied Nutrition (CFSAN). This RCA has a five-year term that commenced in [Month Year]. FDA scientists and our scientists are using ADMET Predictor/Modeler to build predictive models for likely toxicities of food additives and contaminants. Both FDA scientists and our scientists are building a series of models to classify new compounds as toxic or nontoxic from FDA datasets. Included early on in this effort was a special modification to ADMET Predictor requested by FDA scientists to allow the user to set a minimum value for specificity or sensitivity when building a model, and this is now a standard part of the program available to all users. Sensitivity refers to how well a model identifies toxic (or any other property) compounds. A model that determined all compounds are toxic would have 100% sensitivity, because all toxic compounds would be labeled as such; however, all nontoxic compounds would also be labeled toxic. Specificity refers to how well a model distinguishes between toxic and nontoxic compounds. Increasing one usually results in decreasing the other. Depending on the purpose of the model, some scientists will prefer to train models that emphasize one statistic over the other.

During fiscal year 2014 we entered into an RCA with the FDA’s Office of Generic Drugs (OGD). The objective of this RCA, which also has a five-year term, is directed toward the FDA’s evaluation of mechanistic IVIVCs (in vitro-in vivo correlations), an approach to determine whether mechanistic absorption modeling (MAM) correlates laboratory (in vitro) dissolution experiments with thein vivo behavior of dosage forms better than traditional empirical methods.

Cognigen

We acquired Cognigen after the end of our 2014 fiscal year, on September 2, 2014. Cognigen has a reputation for high-quality analysisanalyses and regulatory reporting of data collected during preclinical experiments and clinical trials of new and existing pharmaceutical products, typically working on 30-40 drug projects per year. The modeling analysis of clinical trial data that Cognigen performs is different from the type of consulting servicesmodeling analysis offered by Simulations Plus,Plus; the former relies more on statistical and semi-mechanistic models, whereas the latter relies more on mechanistic models. Statistical models rely on direct observation, and the mathematical equations that are shownused to fit data collected across multiple studies along with describing the data, but withoutvariability within and between patients taking a detailedmedicine when the mechanistic understanding of why they do so.a medicine may not be fully understood. Mechanistic models are based on a detailed understanding of the human body and the chemistry of the drug and involve detailed science-based mathematical representationsand scientific representation of the phenomena involved in drug dissolution/precipitation, absorption, distribution, throughout the body, metabolism, and other effects.elimination. Collectively, the models guide drug formulation design and dose selection.

At recent meetings held by the FDA and other regulatory agencies, such agencies emphasized an interest in bringing physiologically based pharmacokinetics (PBPK – a core strength of Simulations Plus) into clinical pharmacology (a core strength of Cognigen). We believe the combined strengths of Cognigen andthe new Simulation Plus will uniquely position us at the forefront of model-based drug development going forward.

PRODUCT DEVELOPMENT

Development of our software is focused on expanding product lines, designing enhancements to our core technology and integrating existing and new products into our principal software architecture and platform technology. We intend to continue to offer regular updates to our products and to continue to look for opportunities to expand our existing suite of products and services.

To date, we have developed products internally, sometimes also licensing or acquiring products, or portions of products, from third parties. These arrangements sometimes require that we pay royalties to third parties. We intend to continue to license or otherwise acquire technology or products from third parties when it makes business sense to do so. We currently have one license agreement, with Accelrys, Inc., pursuant to which a small royalty is paid to Accelrys, Inc. from revenues on each license for the Metabolite module in ADMET Predictor. This license agreement continues in perpetuity and either party has the right to terminate it.

In 1997 we entered into an exclusive software licensing agreement with TSRL, Inc. (fka(aka Therapeutic Systems Research Laboratories) (TSRL), pursuant to which TSRL licensed certain software technology and databases to us, and we paid royalties to TSRL. On May 15, 2014, we and TSRL entered into a termination and non-assertion agreement pursuant to which the parties agreed to terminate the 1997 exclusive software licensing agreement, As a result, the companywe obtained a perpetual right to use certain source code and data, and TSRL relinquished any rights and claims to any GastroPlus products and to any claims to royalties or other payments under that agreement, and we agreed to pay TSRL total consideration of $6,000,000 as follows: (a) $3,500,000 by May 20, 2014, which amount was comprised of $2,500,000 in cash and $1,000,000 worth of our common stock (which was 164,745 shares based upon the April 25, 2014 closing price per share of $6.07 per share), (b) $750,000 payable on or before April 25, 2015, (c) $750,000 payable on or before April 25, 2016, and (d) $1,000,000 payable on or before April 25, 2017. Our payments due to TSRL by May 20, 2014, April 25, 2014 and April 25, 2015 were paid on or before such deadlines. Our payment obligations described above are non-interest bearingnon-interest-bearing and will be amortized at a constant rate of $150,000 per quarter until it is completely amortized, after which no further expense will be incurred. For most quarters, we expect that this will result in a savings over the royalty payments that would have been paid to TSRL if paid consistent with past practices.

MARKETING AND DISTRIBUTION

We distribute our products and offer our services in North America, South America, Europe, Japan, Australia, New Zealand, India, Singapore, and the People’s Republic of China.

We market our pharmaceutical software and consulting services through attendance and presentations at scientific meetings, exhibits at trade shows, seminars at pharmaceutical companies and government agencies, through our website, and using various communication channels to our database of prospects and customers. At various scientific meetings around the world each year there are numerous presentations and posters presented in which the research that was reported on was performed using our software. Many of these presentations wereare from industry and FDA scientists; some wereare from our staff.

Our sales and marketing efforts are handled primarily internally with our scientific team and several senior management staff assisting our marketing and sales staff with trade shows, seminars, and customer training both via the Internet and on-site. We believe that this is more effective than a completely separate sales team for several reasons: (1) customers appreciate talking directly with software developers and scientists who can answer a wide range of technical questions about methods and features in depth; (2) our scientists and engineers benefit from direct customer contact by gaining an appreciation for the environment and problems of the customer; and (3) we believe the relationships we build through scientist-to-scientist contact are stronger than relationships built through salesperson-to-scientist contacts. We also have one independent distributor in Japan and two independent representatives in China who also sell and market our products.

We provide support to the GastroPlus User Group in Japan, which was organized by Japanese researchers in 2009. As of early 2013, a group of scientists in Europe and North America have organized another group following the example set in Japan. Nearly 500 members have joined this group to date. We support this group through coordination of online meetings each month and managing the web site for exchange of information among members.

PRODUCTION

Our pharmaceutical software products are designed and developed by our development team in California, with locations in Lancaster, Petaluma, San Jose, and San Diego. In addition, we have one team member working out of North Carolina and New York and our Chief Executive Officer works primarily from Auburn, Alabama.

The principal materials and components used in the manufacture of simulation software products include CD-ROMs and instruction manuals, which are also produced in-house and through outside contractors. In-house graphic art and engineering talent enables us to accomplish this production in a cost-efficient manner.

COMPETITION

In our pharmaceutical software and services business, we compete against a number of established companies that provide screening, testing and research services, and products that are not based on simulation software. There are also software companies whose products do not compete directly with, but are sometimes closely related to, ours. Our competitors in this field include some companies with financial, personnel, research and marketing resources that are larger than ours. Our management believes there is currently no significant competitive threat to GastroPlus, DDDPlus, or MembranePlus; however, in spite of a barrier to entry, one could be developed over time. GastroPlus, MedChem Studio, MedChem Designer, and ADMET Predictor/ADMET Modeler, and KIWI operate in a more competitive environment. Several other companies presently offer simulation or modeling software, or simulation-software-based services, to the pharmaceutical industry.

Major pharmaceutical companies conduct drug discovery and development efforts through their internal development staffs and through outsourcing. Smaller companies generally need to outsource a greater percentage of this research. Thus, we compete not only with other software suppliers, but also with the in-house development teams at some of the larger pharmaceutical companies.

Although competitive products exist, both new licenses and license renewals for GastroPlus have continued to grow in spite of this competition. We believe that we enjoy a significant market share in this segment. We believe that the success of our two NCE projects in which we designed, synthesized, and tested new molecules to treat malaria as well as COX-2/COX-1 will further promote the abilities of our ADMET Design Suite for rapid and cost-effective design of lead compounds.

We believe the key factors in our ability to successfully compete in this field are our ability to: (1) continue to invest in research and development, and develop and support industry-leading simulation and modeling software and related products and services to effectively predict activities and ADMET-related behaviors of new drug-like compounds, (2) designuseful in designing new molecules with acceptable activity and ADMET properties, (3)(2) develop and maintain a proprietary database of results of physical experiments that serve as a basis for simulated studies and empirical models, (4)(3) attract and retain a highly skilled scientific and engineering team, and (5)(4) develop and maintain relationships with research and development departments of pharmaceutical companies, universities and government agencies.

We actively seek acquisitions to expand the pharmaceutical software and services business. In July 2014 we signed a merger agreement with Cognigen. The merger closed on September 2, 2014, subsequent to the end of fiscal year 2014. We plan to continue our efforts to find strategic targets and alliances that will enhance our position in the industry.

TRAINING AND TECHNICAL SUPPORT

Customer training and technical support are important factors in customer satisfaction for our pharmaceutical products, and we believe we are an industry leader in providing customer training and technical support in our business areas. We provide in-house seminars at customers’ and potential customers’ sites, as well at selected universities to train students who will soon be industry scientists. These seminars often serve as initial training in the event the potential customer decides to license or evaluate our software. Technical support is provided after the sale of any software in the form of on-site training (at the customer’s expense), web meetings and telephone, fax, and e-mail assistance to the customer’s users during the customer’s license period.

Technical support for pharmaceutical software is provided by our life sciences team and our inside sales and support staff based at our headquarters facilities in Lancaster, California.California and Buffalo, New York. We provide free telephone support offering toll-free numbers in the U.S. and Canada, and e-mail and web-based support for all of our pharmaceutical software products worldwide. Technical support for pharmaceutical software products is minimal, averaging a few person-hours per month.

RESEARCH AND DEVELOPMENT

Research and development (R&D) activities include both enhancement of existing products and development of new products. Development of new products and adding functionality to existing products are capitalized in accordance with Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) 985-20, “Costs of Software to Be Sold Leased, or Marketed”. R&D expenditures, which primarily relate to both capitalized and expensed salaries, R&D supplies, laboratory testing, and R&D consulting, were approximately $2,322,000$2,496,000 during fiscal year 2014,2015, of which $1,369,000$1,169,000 was capitalized. R&D expenditures during fiscal year 20132014 were approximately $1,931,000,$2,322,000, of which $1,129,000$1,369,000 was capitalized.

Our pharmaceutical business R&D activities during fiscal year 20142015 were focused on improving our ADMET Predictor/ADMET Modeler, MedChem Studio, MedChem Designer and GastroPlus products, as well as the development of our new MembranePlus software product described above.

EMPLOYEES

As of August 31, 2014, Simulations Plus2015, we employed 3057 full-time employees and 3 part-time employees, including 2245 in technical and research and development, 45 in marketing and sales, 410 in administration and accounting. An additional Ph.D. level employee joined Simulations Plus in September 2014. Currently 1623 employees hold Ph.Ds. in their respective science or engineering disciplines. Additionally, 6disciplines, and 15 employees hold one or more Master’s degrees. Most of the senior management team and the members of our Board of Directors hold graduate degrees.

The Cognigen acquisition added 35 full-time employees, bringing our total workforce to 66.

We believe that our future success will depend, in part, on our ability to continue to attract, hire and retain qualified personnel. We continue to seek additions to our life sciences team although the competition for such personnel in the pharmaceutical industry is intense. None of our employees is represented by a labor union, and we have never experienced a work stoppage. We believe that our relations with our employees are good.

INTELLECTUAL PROPERTY AND OTHER PROPRIETARY RIGHTS

We own two patents that were acquired as part of our acquisition of certain assets of Bioreason, Inc. We primarily protect our intellectual property through copyrights and trade secrecy.secrets. Our intellectual property consists primarily of source code for computer programs and data files for various applications of those programs in the pharmaceutical software businesses. The expertise of our staff is a considerable asset closely related to intellectual property, and attracting and retaining highly qualified scientists and engineers is essential to our business.

EFFECT OF GOVERNMENT REGULATIONS

Our pharmaceutical software products are tools used in research and development and are neither approved nor approvable by the FDA or other government agencies.

ITEM 1A – RISK FACTORS

Not applicable because we are a smaller reporting company.

ITEM 1B – UNRESOLVED STAFF COMMENTS

None.

ITEM 2 – PROPERTIES–PROPERTIES

We lease approximately 13,500 square feet of office space in Lancaster, California. The original lease had a five-year term with two, three-year options to extend. Following the expiration ofThe initial five-year term expired in February 2011, and we exercised the first of the three-year options which extended the lease to February 2, 2014. In June 2013, the lease was amended extendingto extend the term to February 2, 2017. AsThe amended the lease also provides for an annual base rent increase of 3% per year and two, two-year options to extend the term.extend. The current base rent amount is $24,272 per month; however, we had three months’ free base rent during the months of June, July and August of 2013. We record these three months as a discount divided equally through the initialfirst term of the amended lease from June 2013 through January 2017.

We also lease approximately 12,225 square feet of office space in Buffalo, New York. The Company believes itsinitial five-year term expires in October 2018; the lease allows for a three-year option to extend to October 2021. The current base rent is $15,638 per month. Rent expense, including common area maintenance fees for the years ended August 31, 2015 and 2014 was $488,888 and $305,636, respectively.

We believe our existing facilities and equipment are in good operating condition and are suitable for the conduct of itsour business.

ITEM 3 – LEGAL PROCEEDINGS

Except as described below, we are not a party to any legal proceedings and are not aware of pending legal proceedings of any kind.

In June 2014, the Company was served with a complaint in a civil action entitled Sherri Winslow v. Incredible Adventures, Inc., et al. (Los Angeles Superior Court Case No. BC545789) alleging wrongful death and seeking unspecified damages arising out of a May 18, 2012 plane crash in the State of Nevada.  The Company’s Chief Executive Officer owns the subject aircraft and is also a named defendant. The complaint alleged that the Company was the owner of the subject aircraft.   The Company deniesdenied all material allegations against it, including that it owns or has ever owned any interest in the subject aircraft. On November 25, 2014, the plaintiff and the Company signed a stipulation of dismissal pursuant to which the plaintiff agreed to dismiss the Company without prejudice.  IfThe Company planned to prepare a dismissal with prejudice to be signed on behalf of the plaintiff doesin the event the plaintiff did not discover evidence during a nine month period to and including August 31, 2015 that justifiesjustified bringing the Company back into the litigation,litigation. The Company did not receive notification of any such discovery and is in the Company will prepare aprocess of preparing documents for the plaintiff’s final dismissal with prejudice to be signed on behalf of the plaintiff.prejudice.

ITEM 4 – MINE SAFETY DISCLOSURES.

Not applicable.

PART II

ITEM 5 – MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

The Company’s common stock trades on the NASDAQ Capital Market under the symbol “SLP.”

Price Range of Common Stock

The following table shows low and high sales price for the Company’s common stock for the last eight fiscal quarters.

Holders

As of November 26, 2014,18, 2015, there were 4757 shareholders of record.

Dividends

We paid a total of $3.1$3.4 million and $4.0$3.1 million in cash dividends during fiscal years 20142015 and 2013,2014, respectively, as set forth in the table below. We expect to pay quarterly dividends of $0.05 per share of common stock each quarter, subject to declaration by our Board of Directors. However, there can be no assurances that our Board of Directors will continue the dividend distributions for any specified number of quarters.

* As a tax benefit to shareholders considering the increase in federal income tax for capital gains in 2013, the Board of Directors declared an accelerated cash dividend of $0.14 per share on December 14, 2012, consisting of all of the planned February 2013 dividend of $0.05 per share, plus $0.03 per share of the planned $0.05 dividend per quarter per share for the remaining three fiscal quarters ending in calendar year 2013.

** The Board of Directors decided to increase the May, August, and November 2013 dividend distributions from the planned $0.02 per share ($0.03 of the $0.05 per share quarterly dividend having been distributed in December 2012) to $0.03 per share in May and August 2013 and to $0.04 in November 2013.

Repurchases

There is currently no share repurchase program pending, and the Company made no repurchases of its securities within the fourth quarter of the fiscal year 2014.2015.

Equity Compensation Plan Information

ITEM 6 – SELECTED FINANCIAL DATA

Not applicable because we are a smaller reporting company.

ITEM 7 – MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis should be read in conjunction with the Financial Statements and related notes included in this Annual Report on Form 10-K.

Management Overview

Fiscal year 2014 highlights:Year 2015 Highlights:

Fiscal Year 20142015 Financial Summary:

Consolidated net revenues increased by 59.8% or $6.853 million to $18.314 million in the fiscal year ended August 31, 2015 (FY15) from $11.461 million in the fiscal year ended August 31, 2014 (FY14). $5.228 million of this increase was from revenues generated by our Buffalo, NY division (Cognigen).

Consolidated gross margin increased $4.167 million or 42.4%, to $13.998 million in FY15 from $9.832 in FY14. $3.144 million of this increase in gross margin is from our Buffalo, NY division (Cognigen).

Research and development expenses increased 39.4% to $1.328 million from $0.953 million in FY14.

Income from operations increased 31.9% to $5.857 in FY15 million from $4.439 million in FY14.

Strategy Going Forward:

Fiscal year 2014

FY15 was another record year. We believe the continued growth of our pharmaceutical software and services business segment is the result of steadily increasing adoption of simulation and modeling software tools across the pharmaceutical industry, as well as the expertise we offer as consultants to assist companies involved in the research and development of new medicines. We have received a continuing series of study contracts with pharmaceutical companies ranging from several of the largest in the world to a number of medium-sized and smaller companies in the U.S. and Europe.

Our financial performance has enabled us to maintain significant cash deposits and to continue to invest in our marketing and sales activities in order to reach a wider customer base, as well as to distribute significant cash dividends to our shareholders, purchase the intellectual property rights related to GastroPlus™, and still have sufficient reserves to close an acquisition just after the fiscal year ended.shareholders.

We were successful in identifying and completing the acquisition of Cognigen in September 2014; it is our intent to continue to search for acquisition opportunities that are compatible with our current businesses and that are accretive, i.e., adding to both revenues and earnings.

In the past, weWe do not have used some of our cash to repurchase shares of our common stock because we believe doing so provides greater value to our shareholders than receiving interest on our cash, while leaving us with sufficient cash to meet our operational needs for the foreseeable future and to pursue reasonable potential acquisitions. Although there are noany stock repurchase programs currently in place or pending, however our Board of Directors may consider additional programs from time to time.

Results of Operations

The following sets forth selected items from our statements of operations (in thousands) and the percentages that such items bear to net sales for the fiscal years ended August 31, 2014 (FY14)FY15 and August 31, 2013 (FY13).FY14.

FY14FY15 COMPARED WITH FY13FY14

Net SalesRevenues

Consolidated net revenues increased by 59.8% or $6.853 million to $18.314 million in FY15 from $11.461 million in FY14. $5.228 million of this increase was from revenues generated by our Buffalo subsidiary (Cognigen), which was acquired on the first business day of FY15. Net revenues of the California division increased $1.659 million or 14.5%, to $13.086 million in FY15 from $11.461 million in FY14. FY15 software sales increased $1,390,000 or 13.8%,$1.254 million and training revenues increased $71,000 while analytical study revenues increased by $326,000 compared to $11,461,000 in FY14 from $10,071,000 in FY13. Revenues from sales of software increased approximately $1,642,000 or 17.8%. We attribute the increase in pharmaceutical software sales to increases in the number of licenses with new and existing customers, as well as licensing of new modules to existing customers, especially for our GastroPlus line of products because it has more optional modules than our other products. Revenues from studies decreased in FY14 by $244,000 as funded collaborations that generated approximately $213,000 of revenues recorded in FY13 were completed.FY14.

Cost of SalesRevenues

Cost of sales decreased by $18,000, or 1.1%, to $1,629,000 in FY14 from $1,647,000 in FY13. As a percentage of net sales,Consolidated cost of sales decreasedrevenues increased by 2.2%. This decrease$2.687 million to $4.316 million in FY15 from $1.629 million in FY14. The majority of this increase was primarily due to decreased FY14 royalty paymentssalary expenses of $2.025 million added as a result of the terminationCognigen acquisition. Cost of revenues for Simulations Plus increased by $602,000 in FY15 compared to FY14. Of that amount, $169,000 was due to increased software amortization costs, and $96,000 was due to increased labor costs associated with increased study activities plus another $37,000 of increased technical support costs. Simulations Plus also saw a decrease in royalty costs of $144,000 in FY15, which was offset by increased amortization cost of $600,000 related to the TSRL agreement.

Cost of revenues as a percentage of revenue increased from 14.2% in FY14 to 23.6% in FY15. The majority of this percentage change is a result of the TRSL license agreement in May 2014 described below.

In 1997 we entered into an exclusiveblending of lower margins on Cognigen’s consulting services with Simulations Plus’ higher margins that are based primarily on software licensing agreement with TSRL, pursuant to which TSRL licensed certain software technology and databases to us, and we paid royalties to TSRL. On May 15, 2014, we and TSRL entered into a termination and non-assertion agreement pursuant to which the parties agreed to terminate the 1997 exclusive software licensing agreement, as a result, the company obtained a perpetual right to use certain source code and data, and TSRL relinquished any rights and claims to any GastroPlus products and to any claims to royalties or other payments under that agreement. We agreed to pay TSRL total consideration of $6,000,000 as follows: (a) $3,500,000 by May 20, 2014, which amount was comprised of $2,500,000 in cash and $1,000,000 worth of our common stock (which was 164,745 shares based upon the April 25, 2014 closing price per share of $6.07 per share), (b) $750,000 payable on or before April 25, 2015, (c) $750,000 payable on or before April 25, 2016, and (d) $1,000,000 payable on or before April 25, 2017. Our payment obligations described above are non-interest bearing and will be amortized at a constant rate of $150,000 per quarter until it is completely amortized, after which no further expense will be incurred. The amortization began May 15, 2014 resulting in a total amortization expense of $175,000 for FY14. For most quarters, we expect that this will result in a savings over the royalty payments that would have been paid to TSRL if paid consistent with past practices, and thereby increase earnings over time.

We continue to pay royalties to Accelrys, Inc. (the original agreement was with Symyx Technologies which merged with Accelrys, Inc.) Metabolite/Metabolism. Total royalties paid to Accelrys, Inc. in FY14 were $47,000.sales.

A significant portion of cost of salesrevenues for pharmaceutical software products is the systematic amortization of capitalized software development costs. Amortizationcosts, which is an independent fixed cost rather than a variable cost related to revenues. This amortization cost increased approximately $91,000, or 12.7%,$215,000 in FY14FY15 compared with FY13.FY14. The increase is related to our latest releases of GastroPlus and ADMETPredictor and amortization of software acquired as part of the Cognigen acquisition.

Service cost, such as labor costs for trainings/workshops, analytical studies, and technical support, increased approximately $39,000, in FY14 compared with FY13 due to a larger number of person-hours allocated to those services with our expanded customer base.

Gross ProfitMargin

Gross profitConsolidated gross margin increased $1,408,000$4.167 million or 16.7%42.4%, to $9,832,000$13,998 million in FY14FY15 from $8,424,000$9.832 in FY13. We attributeFY14. $3.144 million of this increase toin gross margin is from Cognigen, which showed a 60.1% gross margin on $5.228 million in revenues for FY15. The remainder of the increasedincrease came mainly from margin on software sales of pharmaceutical software, which outweighed an increase in the cost of goods sold.and analytical studies.

Selling, General and Administrative Expenses

Selling, general, and administrative (SG&A) expenses increased $890,000,$2.379 million, or 25.1%53.6% to $4,440,000$6.818 million in FY14, compared to $3,550,000FY15 from $3.380 million in FY13; and, as a percentage of sales, SG&A increased by 3.6% year-over-year from approximately 35. 2% in FY13 to 38.8% in FY14.

The major changesincreases in SG&A expense were:

Research and Development

We incurred approximately $2,496,000 of research and development costs during FY15. Of this amount, $1,168,000 was capitalized and $1,328,000 was expensed. We incurred approximately $2,322,000 of research and development costs during FY14. Of this amount, $1,369,000 was capitalized and $953,000 was expensed. In FY13, we incurred $1,931,000 of research and development costs, of which $1,129,000 was capitalized and $802,000 was expensed. The increase of $391,000,$374,000, or 20%7.5%, in total research and development expenditures from FY13FY14 to FY14FY15 was mainly due to staff increases and salary increases for existing staff. In addition, we incurred $40,000 of costs related to our NCE COX2/COX1 project.

Income from operations

During FY14, we generated income from operations of $4,439,000 as compared to $4,072,000 for FY13, an increase of 9%. We attribute this increase to increases in gross profit that outweighed the increase in SG&Astaff and research and development expenses.expenditures of $223,000 at Cognigen.

Other Incomeincome (expense)

Net other income (expense) in FY15 decreased by $110,000, or 59.9%,$238,000 to a net expense of $164,000 from income of $74,000 in FY14 from $184,000 in FY13.FY14. This is due mainly to the lower interest income and lower currency exchange gainlosses incurred in FY13 compared with FY12, andFY15 due to currency fluctuations from a decrease in sublease income from Words+ as they closed their operations in March 2013.strengthening US dollar.

Provision for Income Taxes

ProvisionThe provision for income taxes was $1.850 million for FY14 increased by $118,000, or 19.9%, to $1,488,000FY15 compared to $1,370,000$1.488 million for FY13 due to higher taxable income. TheFY14. Our effective tax rate was 33% for 2014 compareddecreased to 32.2%32.5% in FY13FY15 from 33.0% in FY14.

Net Income

Net income for FY14 increased by $139,000,$818,000, or 4.8%27%, to $3,026,000, compared to $2,886,000 for FY13. We attribute this increase to increases$3.843 million in gross profit that outweighedFY15 from $3.025 million in FY14. Approximately $683,000 of the increase in SG&A and research and development expenses,is income from Cognigen. As discussed above, we incurred one-time consulting costs associated with the decrease in otherCognigen acquisition of $400,000. Without those one-time costs, net income andwould have increased by another approximately $246,000 to $4.089 million net of tax, expense.an increase of 35.2% over FY14.

SEASONALITY

Our sales exhibit some seasonal fluctuations, with the fourth fiscal quarter (June-August) generally having the lowest sales over the past three fiscal years because of summer vacations and reduced activities at our customers’ sites. This unaudited quarterly sales information has been prepared on the same basis as the annual information presented elsewhere in this Annual Report on Form 10-K and, in the opinion of management, reflects all adjustments (consisting of normal recurring entries) necessary for a fair presentation of the information presented. Net sales for any quarter are not necessarily indicative of sales for any future period; however, because our pharmaceutical software is licensed on an annual basis, renewals are usually within the same quarter year after year.

LIQUIDITY AND CAPITAL RESOURCES

Our principal source of capital has been cash flow from our operations. We have achieved continuous positive operating cash flow over the last teneleven fiscal years. We believe that our existing capital and anticipated funds from operations will be sufficient to meet our anticipated cash needs for working capital and capital expenditures for the foreseeable future. Thereafter, if cash generated from operations is insufficient to satisfy our capital requirements, we may open a revolving line of credit with a bank, or we may have to sell additional equity or debt securities or obtain credit facilities. In the event such financing is needed in the future, there can be no assurance that such financing will be available to us, or, if available, that it will be in amounts and on terms acceptable to us.

We are not aware of any trends or demands, commitments, events or uncertainties that are reasonably likely to result in a decrease in liquidity of our assets. The trend over the last ten years has been increasing cash deposits from our operating cash flows, and we expect that trend to continue for the foreseeable future. In FY14 we used $2,500,000 of our cash reserves to pay the initial installment of the amounts we owe under termination and non-assertion agreement we entered into with TSRL in May 2014 that terminated the exclusive software licensing agreement we entered with TSRL in 1997. We also incurred $2,500,000 of debt in connection with termination and non-assertion agreement. In April 2015 we made our first payment of $750,000 under this agreement. We anticipate that that debt will be paid out of operations from the reduction in royalty payments that are no longer payable under the 1997 licensing agreement as a result of its termination. See “FY14 COMPARED WITH FY13—Cost of Sales,” above.

On July 23, 2014, we signed a merger agreementthe Merger Agreement with Cognigen. The merger closed on September 2, 2014, subsequent to the end of FY14, and Cognigen became our wholly owned subsidiary. In connection with the closing we paid $2,080,000 in cash and issued 491,159 shares of common stock of the Company to the former Cognigen stockholders.shareholders. The 491,159 shares were valued at $3,120,000 based on a $6.35 per share price, which was the volume-weighted average closing price of our common stock for the 30-consecutive trading day period ending two trading days before the closing date. Within three business days of July 23, 2016, subject to certain holdback provisions, we will pay an additional $720,000 in cash and issue an additional 170,014 shares of common stock to the former Cognigen stockholders, which additional shares are valued at $1,080,000 under the formula described above.

We will continue to seek opportunities for strategic acquisitions. If one or more such acquisitions is identified, a substantial portion of our cash reserves may be required to complete it; however, we intend to maintain sufficient cash reserves after any acquisition to provide reasonable assurance that outside financing will not be necessary to continue operations. If we identify an attractive acquisition that would require more cash to complete than we are willing or able to use from our cash reserves, we will consider financing options to complete the acquisition, including obtaining loans and issuing additional securities.

Our board of directors declared a $0.05 per share quarterly cash dividend beginning with the second quarter of our 2012 fiscal year. Quarterly dividend payments made in FY13FY14 and FY14FY15 are listed in the following table.

* As a tax benefit to shareholders considering the increase in federal income tax for capital gains in 2013, the Board of Directors declared an accelerated cash dividend of $0.14 per share on December 14, 2012, consisting of all of the planned February 2013 dividend of $0.05 per share, plus $0.03 per share of the planned $0.05 dividend per quarter per share for the remaining three fiscal quarters ending in calendar year 2013.

**The Board of Directors decidedhas indicated its intention to increase the May, August, and November 2013 dividend distributions from the planned $0.02 per share ($0.03 of thepay $0.05 per share quarterly dividend having been distributed in December 2012) to $0.03 per share in May and August 2013 and to $0.04 in November 2013.

dividends. There can be no assurances that our Board of Directors will continue the dividend distributions for any specified number of quarters; however, there is no current plan to discontinue the quarterly dividend distributions. After the end of FY14,FY15, in November 2014,2015, our Board of Directors declared a dividend distribution of $0.05 per share.

KNOWN TRENDS OR UNCERTAINTIES

Although we have not seen any significant reduction in revenues to date, we sawhave seen some consolidation in the pharmaceutical industry during the fairly recent economic downturn. This trend hasdownturns. These consolidations have not had a negative effect on our total sales to that industry; however, should consolidations and downsizing in the industry continue to occur, those events could adversely impact our revenues and earnings going forward.

We believe that the need for improved productivity in the research and development activities directed toward developing new medicines will continue to result in increasing adoption of simulation and modeling tools such as those we produce. New product developments in the pharmaceutical business segments could result in increased revenues and earnings if they are accepted by our markets; however, there can be no assurances that new products will result in significant improvements to revenues or earnings. For competitive reasons, we do not disclose all of our new product development activities.

Our continued quest for acquisitions could result in a significant change to revenues and earnings if one or more such acquisitions are completed.

The potential for growth in new markets (e.g., aerospace and healthcare) is uncertain. We will continue to explore these opportunities until such time as we either generate sales or determine that resources would be more efficiently used elsewhere.

INFLATION

We have not been affected materially by inflation during the periods presented, and no material effect is expected in the near future.

OFF-BALANCE SHEET ARRANGEMENTS

As of August 31, 2014,2015, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. As such, we are not materially exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in such relationships.

We do not have relationships or transactions with persons or entities that derive benefits from their non-independent relationship with us or our related parties.

RECENTLY ISSUED OR NEWLY ADOPTED ACCOUNTING STANDARDS

In July 2012,2013, the Financial Accounting Standard Board (“FASB”)FASB issued Accounting Standards Update 2012-02, “Testing Indefinite-Lived Intangible Assets for Impairment” (“ASU 2012-02”), which amended the guidance in Accounting Standards Update 2011-08 Testing Goodwill for Impairment to simplify the testing of indefinite-lived intangible assets other than goodwill for impairment. ASU 2012-02 becomes effective for annual and interim impairment tests performed for fiscal years beginning on or after September 15, 2012 and earlier adoption is permitted. We adopted this standard in the first quarter of fiscal year 2013. We believe adoption did not have a material effect on our financial statements.

In July 2013, the FASB issued ASU(ASU) 2013-11,Income Taxes (Topic 740): Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists(“ASU 2013-11”), which eliminates diversity in practice for the presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss or a tax credit carryforward is available to reduce the taxable income or tax payable that would result from disallowance of a tax position. ASU 2013-11 affects only the presentation of such amounts in an entity’s balance sheet and is effective for fiscal years beginning after December 15, 2013 and interim periods within those years. Early adoption is permitted. We are evaluating the impact, if any, of the adoption of ASU 2013-11adopted this standard during FY15 and believe that it did not have a significant effect on our balance sheet.financial position or results of operation.

In May 2014, FASB issued Accounting Standards Update (ASU)ASU No. 2014-09,Revenue from Contracts with Customers.Customers(“ASU No. 2014-09”). The standard will eliminate the transaction- and industry-specific revenue recognition guidance under current U.S. GAAP and replace it with a principles-based approach for determining revenue recognition. ASU 2014-09 is effective for annual and interim periods beginning after December 15, 2016.2017. Early adoption is not permitted.permitted for years beginning after December 15, 2016. The revenue recognition standard is required to be applied retrospectively, including any combination of practical expedients as allowed in the standard. We are evaluating the impact, if any, of the adoption of ASU 2014-09 to our financial statements and related disclosures. The Company has not yet selected a transition method nor has it determined the effect of the standard on its ongoing financial reporting.

SIGNIFICANT ACCOUNTING POLICIES

Estimates

Our financial statements and accompanying notes are prepared in accordance with accounting principles generally accepted in the United States of America. Preparing financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, and expenses. These estimates and assumptions are affected by management’s application of accounting policies. Actual results could differ from those estimates. Significant accounting policies for us include revenue recognition, accounting for capitalized software development costs, valuation of stock options, and accounting for income taxes.

Revenue Recognition

We recognize revenues related to software licenses and software maintenance in accordance with the FASB Accounting Standards Codification (“ASC”) 985-605, “Software“Software – Revenue Recognition”Recognition”. Software product revenue is recorded when the following conditions are met: 1) evidence of arrangement exists; 2) delivery has been made; 3) the amount is fixed; and 4) collectability is probable. Post-contract customer support (“PCS”) obligations are insignificant; therefore, revenue for PCS is recognized at the same time as the licensing fee, and the costs of providing such support services are accrued and amortized over the obligation period.

As a byproduct of ongoing improvements and upgrades for the new programs and new modules of software, some modifications are provided to our customers who have already purchased software at no additional charge. Other software modifications result in new, additional cost modules that expand the functionality of the software. These are licensed separately. We consider the modifications that are provided without charge to be minimal, as they do not significantly change the basic functionality or utility of the software, but rather add convenience, such as being able to plot some additional variable on a graph in addition to the numerous variables that had been available before, or adding some additional calculations to supplement the information provided from running the software. Such software modifications for any single product have typically occurred once or twice per year, sometimes more, sometimes less. Thus, they are infrequent. The Company provides, for a fee, additional training and service calls to its customers and recognizes revenue at the time the training or service call is provided.

Generally, we enter into one-year license agreements with customers for the use of our pharmaceutical software products. We recognize revenue on these contracts when all the criteria are met.

Most license agreements have a term of one year; however, from time to time, we enter into multi-year license agreements. We generally unlock and invoice software one year at a time for multi-year licenses. Therefore, revenue is generally recognized one year at a time. On some smaller low-revenue agreements with academia, we have recognizedCertain of the Company's software products are housed and supported on the Company's computer networks. Software revenues for multiple-year agreementsthose products are included in income over the first year.life of the contract.

We recognize the revenue from collaboration research and the revenue from grants equally over their terms. However,For contract revenue based on actual hours incurred we recognize revenue when the work is performed. For fixed price contracts, we recognize contract study and other contract revenue using the percentage-of-completion method, depending upon how the contract studies are engaged, in accordance with FASB ASC 605-35, “Revenue“Revenue Recognition – Construction-Type and Production-Type Contracts”. To recognize revenue using the percentage-of-completion method, we must determine whether we meet the following criteria: 1) there is a long-term, legally enforceable contract, 2) it is possible to reasonably estimate the total project costs, and 3) it is possible to reasonably estimate the extent of progress toward completion.

Cash and Cash Equivalents

For purposes of the statements of cash flows, we consider all highly liquid investments purchased with original maturities of three months or less to be cash equivalents.

Accounts Receivable

We analyze the age of customer balances, historical bad-debt experience, customer creditworthiness, and changes in customer payment terms when making estimates of the collectability of the Company’s trade accounts receivable balances. If we determine that the financial conditions of any of its customers deteriorated, whether due to customer-specific or general economic issues, an increase in the allowance may be made. Accounts receivable are written off when all collection attempts have failed. We have not experienced any bad-debts in our pharmaceutical software and services business.

Capitalized Computer Software Development Costs

Software development costs are capitalized in accordance with FASB ASC 985-20, “Costs of Software to Be Sold Leased, or Marketed”. Capitalization of software development costs begins upon the establishment of technological feasibility and is discontinued when the product is available for sale.

The establishment of technological feasibility and the ongoing assessment for recoverability of capitalized software development costs require considerable judgment by management with respect to certain external factors including, but not limited to, technological feasibility, anticipated future gross revenues, estimated economic life, and changes in software and hardware technologies. Capitalized computer software development costs are comprised primarily of salaries and direct payroll-related costs and the purchase or licensing of existing software to be used in the Company’s software products.

Amortization of capitalized computer software development costs is provided on a product-by-product basis on the straight-line method over the estimated economic life of the products not to exceed five years, although all of our current software products have already been on the market for 7-15 years except for our newest programs, MedChem Designer and MembranePlus, and we do not foresee an end-of-life for any of them at this point. Amortization of software development costs amounted to $1,023,139 and $807,705 for FY15 and $716,888 for the years ended August 31, 2014 and 2013,FY14, respectively. We expect future amortization expense to vary due to increases in capitalized computer software development costs.

We test capitalized computer software development costs for recoverability whenever events or changes in circumstances indicate that the carrying amount may not be recoverable.

Property and Equipment

Property and equipment are recorded at cost, less accumulated depreciation and amortization. Depreciation and amortization are provided using the straight-line method over the estimated useful lives as follows:

Maintenance and minor replacements are charged to expense as incurred. Gains and losses on disposals are included in the results of operations.

Intangible Assets and Goodwill

The Company performs valuations of assets acquired and liabilities assumed on each acquisition accounted for as a business combination and recognizes the assets acquired and liabilities assumed at their acquisition date fair value. Acquired intangible assets include customer relationships, software, trade name, and non-compete agreements. The Company determines the appropriate useful life by performing an analysis of expected cash flows based on historical experience of the acquired businesses. Intangible assets are amortized over their estimated useful lives using the straight-line method, which approximates the pattern in which the majority of the economic benefits are expected to be consumed.

Goodwill represents the excess of the cost of an acquired entity over the fair value of the acquired net assets. Goodwill is not amortized, instead it is tested for impairment annually or when events or circumstances change that would indicate that goodwill might be impaired. Events or circumstances that could trigger an impairment review include, but are not limited to, a significant adverse change in legal factors or in the business climate, an adverse action or assessment by a regulator, unanticipated competition, a loss of key personnel, significant changes in the manner of the Company's use of the acquired assets or the strategy for the Company's overall business, significant negative industry or economic trends or significant under-performance relative to expected historical or projected future results of operations.

Goodwill is tested for impairment at the reporting unit level, which is one level below or the same as an operating segment. As of August 31, 2015, the Company determined that it has two reporting units, Simulations Plus and Cognigen. When testing goodwill for impairment, the Company first performs a qualitative assessment to determine whether it is necessary to perform step one of a two-step annual goodwill impairment test for each reporting unit. The Company is required to perform step one only if it concludes that it is more likely than not that a reporting unit's fair value is less than its carrying value. Should this be the case, the first step of the two-step process is to identify whether a potential impairment exists by comparing the estimated fair values of the Company's reporting units with their respective book values, including goodwill. If the estimated fair value of the reporting unit exceeds book value, goodwill is considered not to be impaired, and no additional steps are necessary. If, however, the fair value of the reporting unit is less than book value, then the second step is performed to determine if goodwill is impaired and to measure the amount of impairment loss, if any. The amount of the impairment loss is the excess of the carrying amount of the goodwill over its implied fair value. The estimate of implied fair value of goodwill is primarily based on an estimate of the discounted cash flows expected to result from that reporting unit, but may require valuations of certain internally generated and unrecognized intangible assets such as the Company's software, technology, patents and trademarks. If the carrying amount of goodwill exceeds the implied fair value of that goodwill, an impairment loss is recognized in an amount equal to the excess.

As of August 31, 2015, the entire balance of goodwill was attributed to the Company's Cognigen reporting unit. Intangible assets subject to amortization are reviewed for impairment whenever events or circumstances indicate that the carrying amount of these assets may not be recoverable. The Company has not recognized any impairment charges during FY15 and FY14.

Reconciliation of Goodwill for the period ended August 31, 2015:

Other Intangible Assets

The following table summarizes other intangible assets as of August 31, 2015:

Amortization expense for FY15 and FY14 was$147,500 and $-0-, respectively.

Business Acquisitions

The Company accounted for the acquisition of Cognigen using the purchase method of accounting where the assets acquired and liabilities assumed are recognized based on their respective estimated fair values. The excess of the purchase price over the estimated fair values of the net assets acquired is recorded as goodwill. Determining the fair value of certain acquired assets and liabilities is subjective in nature and often involves the use of significant estimates and assumptions, including, but not limited to, the selection of appropriate valuation methodology, projected revenue, expenses and cash flows, weighted average cost of capital, discount rates, estimates of advertiser and publisher turnover rates and estimates of terminal values. Business acquisitions are included in the Company's consolidated financial statements as of the date of the acquisition.

Fair Value of Financial Instruments

Assets and liabilities recorded at fair value in the Condensed Balance Sheets are categorized based upon the level of judgment associated with the inputs used to measure their fair value. The categories, as defined by the standard are as follows:

For certain of our financial instruments, including accounts receivable, accounts payable, contract payable, accrued payroll and other expenses, and accrued bonus to officer, the amounts approximate fair value due to their short maturities.

Research and Development Costs

Research and development costs are charged to expense as incurred until technological feasibility has been established. These costs consist primarily of salaries and direct payroll-related costs. It also includes purchased software and databases that were developed by other companies and incorporated into, or used in the development of, our final products.

Income Taxes

We utilize FASB ASC 740-10, “Income Taxes”“Income Taxes”, which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns.

Under this method, deferred income taxes are recognized for the tax consequences in future years of differences between the tax bases of assets and liabilities and their financial reporting amounts at each year-end based on enacted tax laws and statutory tax rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount expected to be realized. The provision for income taxes represents the tax payable for the period and the change during the period in deferred tax assets and liabilities.

Stock-Based Compensation

The Company accounts for stock options using the modified prospective method in accordance with FASB ASC 718-10,“Compensation-Stock Compensation”. Under this method, compensation costs include estimated grant date fair value of the awards amortized over the options’ vesting period. Stock-based compensation was $144,327$295,243 and $115,740$144,327 for the fiscal years ended August 31, 2014FY15 and 2013,FY14, respectively, and is included in the statements of operations as Consulting, Salaries, and Research and Development expense.

ITEM 7A – QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable because we are a smaller reporting company.

ITEM 8 –- FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

See the financial statements included elsewhere in this report beginning at page F-1, which are incorporated herein by reference.

ITEM 9 – CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

There have been no changes to our public accountants during the past two years.

ITEM 9A – CONTROLS AND PROCEDURES

We are responsible for maintaining disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act. Disclosure controls and procedures are controls and other procedures designed to provide reasonable assurance that the information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

Based on our management’s evaluation (with the participation of our principal executive officer and principal financial officer) of our disclosure controls and procedures as required by Rule 13a-15(b) and 15d-15(b) under the Exchange Act, our principal executive officer and principal financial officer have concluded that our disclosure controls and procedures were effective as of August 31, 2014.2015.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal controls over financial reporting, as defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Our internal controls over financial reporting are designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external purposes in accordance with generally accepted accounting principles.

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal controls over financial reporting based on the framework established by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation under such framework, including the completion and review of internal review assessment forms and the completion and review of financial reporting information systems and controls checklists in the framework, our management concluded that our internal control over financial reporting was effective as of August 31, 2014.2015.

No changes were made in our internal controls over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act) during the quarter ended August 31, 2014,2015, that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls or internal controls over financial reporting will prevent all errors or all instances of fraud. A control system, no matter how well-designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple errors or mistakes. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part upon certain assumptions about the likelihood of future events, and any design may not succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitation of a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

ITEM 9B - OTHER INFORMATION

Not applicable.

PART III

ITEM 10 – DIRECTORS, AND EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

Code of Ethics

Our code of ethics is posted on our website: www.simulations-plus.com.

Changes to Procedures for Recommending Nominees to the Board of Directors

There have been no material changes to the procedures by which security holders may recommend nominees to our board of directors since we last described such procedures.

The remaining information required by Item 10 is incorporated by reference from the sections entitled “Board Matters and Corporate Governance,” “Election of Directors,” “Executive Compensation and Other Information,” and “Security Ownership of Certain Beneficial Owners and Management” in our definitive proxy statement on Schedule 14A to be distributed in connection with our 20152016 Annual Shareholders’ Meeting (the “Proxy Statement”).

ITEM 11 – EXECUTIVE COMPENSATION

The information required by Item 11 is incorporated by reference from the sections entitled “Executive Compensation and Other Information” and “Board Matters and Corporate Governance” in the Proxy Statement.

ITEM 12 –- SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by Item 12 is incorporated by reference from the sections entitled “Security Ownership of Certain Beneficial Owners and Management” and “Executive Compensation and Other Information” in the Proxy Statement.

ITEM 13 – CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by Item 13 is incorporated by reference from the subsection entitled “Certain Relationships and Related Transactions; Transactions with Related Persons” and the section entitled “Board Matters and Corporate Governance” in the Proxy Statement.

ITEM 14 – PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by Item 14 is incorporated by reference from the section of the proposal entitled “Ratification of Selection of Independent Registered Public Accounting Firm” in the Proxy Statement.

PART IV

ITEM 15 – EXHIBITS, FINANCIAL STATEMENT SCHEDULES

(a)

(1) Financial Statements. The consolidated financial statements are included in this Annual Report on Form 10-K beginning on page F-1.

(2) Financial Statement Schedules. All financial statement schedules have been omitted since the information is either not applicable or required or was included in the financial statements or notes included in this Annual Report on Form 10-K.

(3) List of Exhibits required by Item 601 of Regulation S-K. See part (b) below.

(b) Exhibits. The following exhibits are filed or furnished with this report. Those exhibits marked with a (†) refer to management contracts or compensatory plans or arrangements.

______________

^ Schedules and exhibits omitted pursuant to Item 601(b)(2) of Registration S-K. The registrant agrees to furnish supplementally a copy of any omitted schedule to the SEC upon request.

* Filed herewith

** Furnished herewith

(1) Incorporated by reference to the Company’s Registration Statement on Form SB-2 (Registration No. 333-6680) filed on March 25, 1997.

(2) Incorporated by reference to the Company’s Form 10-KSB for the fiscal year ended August 31, 1997.

(3) Incorporated by reference to the Company’s Form 10-K for the fiscal year ended August 31, 2009.

(4) Incorporated by reference to the Company’s Form 10-K for the fiscal year ended August 31, 2010.

(5) Incorporated by reference to the Company’s Form 10-K for the fiscal year ended August 31, 2011.

(6) Incorporated by reference to the Company’s Form 10-KSB for the fiscal year ended August 31, 2006.

(7) Incorporated by reference to the Company’s Form 8-K filed November 16, 2011.

(8) Incorporated by reference to the Company’s Form 10-Q filed July 10, 2013.

(9) Incorporated by reference to the Company’s Form 10-K filed November 18, 2013.

(10) Incorporated by reference to the Company’s Form 10-Q filed April 9, 2014.

(11) Incorporated by reference to the Company’s Form 8-K filed May 19, 2014.

(12) Incorporated by reference to the Company’s Form 8-K filed September 4, 2014.

(13) Incorporated by reference to the Company’s Form 8-K/A filed November 18, 2014.

(c) Financial Statement Schedule.

See Item 15(a)(2) above.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

November 28, 201420, 2015

SIMULATIONS PLUS, INC.

By:/s/ John R. Kneisel

      John R. Kneisel

      Chief Financial Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

SIMULATIONS PLUS, INC. & SUBSIDIARY

CONTENTS

August 31, 20142015 and 20132014

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of

Simulations Plus, Inc. and Subsidiary

Lancaster, California

We have audited the accompanying consolidated balance sheets of Simulations Plus, Inc. (a California corporation) and Subsidiary as of August 31, 20142015 and 20132014 and the related consolidated statements of operations, shareholders’ equity and cash flows for the years then ended. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards established by the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Simulations Plus, Inc. and Subsidiary as of August 31, 20142015 and 2013,2014, and the results of itstheir operations and cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

/s/ Rose, Snyder & Jacobs LLP

Rose, Snyder & Jacobs LLP

Encino, California

November 26, 201418, 2015

SIMULATIONS PLUS, INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

As of August 31, 20142015 and 20132014

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

For the yearsyear ended August 31, 2014 and 2013

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC.

STATEMENTS OF SHAREHOLDERS' EQUITY

For the years ended August 31, 20142015 and 20132014

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC.

STATEMENTS OF CASH FLOWS

For the years ended August 31, 2014 and 2013

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

For the years ended August 31, 2015 and 2014

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC. & SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

August 31, 20142015 and 20132014

NOTE 1 – ORGANIZATION AND LINES OF BUSINESS

Organization

Simulations Plus, Inc. (the “Company”, “we”, “us”, “our”(“Simulations Plus”) was incorporated on July 17, 1996. Subsequent to August 31, 2014, onOn September 2, 2014, the CompanySimulations Plus, Inc. acquired 100%all of the stockoutstanding equity interests of Cognigen Corporation.Corporation (“Cognigen”) and Cognigen became a wholly owned subsidiary of Simulations Plus, Inc. (collectively, “Company”, “we”, “us”, “our”), pursuant to the terms of that certain Agreement and Plan of Merger, dated as of July 23, 2014, by and between Simulations Plus and Cognigen (the “Merger Agreement”).

Lines of Business

The Company designs and develops pharmaceutical simulation software to promote cost-effective solutions to a number of problems in pharmaceutical research and in the education of pharmacy and medical students, and it provides consulting services to the pharmaceutical and chemical industries. Recently, the Company has begun to explore developing software applications for defense and for health care outside of the pharmaceutical industry.

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Principles of Consolidation

The consolidated financial statements include the accounts of Simulations Plus and, as of September 2, 2014, its wholly-owned subsidiary, Cognigen. All significant intercompany accounts and transactions are eliminated in consolidation.

Use of Estimates

Our financial statements and accompanying notes are prepared in accordance with accounting principles generally accepted in the United States of America.America (“U.S. GAAP”). Preparing financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, and expenses. These estimates and assumptions are affected by management’s application of accounting policies. Actual results could differ from those estimates. Significant accounting policies for us include revenue recognition, accounting for capitalized computer software development costs, valuation of stock options, and accounting for income taxes.

Revenue Recognition

We recognize revenues related to software licenses and software maintenance in accordance with the Financial Accounting Standards Board (“FASB”(the “FASB”) Accounting Standards Codification (“ASC”) 985-605, “Software -“Software – Revenue Recognition”. Software productsproduct revenue is recorded when the following conditions are met: 1) evidence of arrangement exists,exists; 2) delivery has been made,made; 3) the amount is fixed,fixed; and 4) collectability is probable. Post-contract customer support ("PCS"(“PCS”) obligations are insignificant; therefore, revenue for PCS is recognized at the same time as the licensing fee, and the costs of providing such support services are accrued and amortized over the obligation period.

SIMULATIONS PLUS, INC. & SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

August 31, 2015 and 2014

As a byproduct of ongoing improvements and upgrades for the new programs and new modules of software, some modifications are provided to our customers who have already purchased software at no additional charge. Other software modifications result in new, additional cost modules that expand the functionality of the software. These are licensed separately. We consider the modifications that are provided without charge to be minimal, as they do not significantly change the basic functionality or utility of the software, but rather add convenience, such as being able to plot some additional variable on a graph in addition to the numerous variables that had been available before, or adding some additional calculations to supplement the information provided from running the software. Such software modifications for any single product have typically occurred once or twice per year, sometimes more, sometimes less. Thus, they are infrequent. The Company provides, for a fee, additional training and service calls to its customers and recognizes revenue at the time the training or service call is provided.

SIMULATIONS PLUS, INC.

NOTES TO FINANCIAL STATEMENTS

August 31, 2014 and 2013

Generally, we enter into one-year license agreements with customers for the use of our pharmaceutical software products. We recognize revenue on these contracts when all the criteria are met.

Most license agreements have a term of one year; however, from time to time, we enter into multi-year license agreements.Weagreements. We generally unlock and invoice software one year at a time for multi-year licenses. Therefore, revenue is recognized one year at a time. Certain of the Company's software products are housed and supported on the Company's computer networks. Software revenues for those products are included in income over the life of the contract.

We recognize the revenue from collaboration research and the revenue from grants equally over their terms. However,For contract revenue based on actual hours incurred we recognize revenues when the work is performed. For fixed price contracts, we recognize contract study and other contract revenue using the percentage of completionpercentage-of-completion method, depending upon how the contract studies are engaged, in accordance with FASB ASC 605-35, “Revenue Recognition – Construction-Type and Production-Type Contracts”. To recognize revenue using the percentage of completionpercentage-of-completion method, we must determine whether we meet the following criteria: 1) there is a long-term, legally enforceable contract, 2) it is possible to reasonably estimate the total project costs, and 3) it is possible to reasonably estimate the extent of progress toward completion.

Cash and Cash Equivalents

For purposes of the statements of cash flows, the Company considers all highly liquid investments purchased with original maturities of three months or less to be cash equivalents.

Accounts Receivable

We analyze the age of customer balances, historical bad debt experience, customer creditworthiness, and changes in customer payment terms when making estimates of the collectability of the Company’s trade accounts receivable balances. If we determine that the financial conditions of any of our customers have deteriorated, whether due to customer-specific or general economic issues, an increase in the allowance may be made. Accounts receivable are written off when all collection attempts have failed.

Capitalized Computer Software Development Costs

Software development costs are capitalized in accordance with FASB ASC 985-20,“Costs of Software to Be Sold, Leased, or Marketed”. Capitalization of software development costs begins upon the establishment of technological feasibility and is discontinued when the product is available for sale.

SIMULATIONS PLUS, INC. & SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS