UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
FORM 10-K
(Mark One)
☒ | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended March 3, 20131, 2015
OR
☐ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from ________ to _______
Commission file number 1-4415
PARK ELECTROCHEMICAL CORP.
(Exact Name of Registrant as Specified in Its Charter)
New York | 11-1734643 |
(State or Other Jurisdiction of Incorporation of Organization) | (I.R.S. Employer Identification No.) |
48 South Service Road, Melville, New York (Address of Principal Executive Offices) | 11747 (Zip Code) |
Registrant’s telephone number, including area code (631) 465-3600
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class | Name of Each Exchange on Which |
Common Stock, par value $.10 per share | New York Stock Exchange |
Preferred Stock Purchase Rights | New York Stock Exchange |
Securities registered pursuant to Section 12(g) of the Act:None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes¨ ☐ Nox ☒
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes¨ ☐ Nox ☒
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yesx ☒ No¨ ☐
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yesx ☒ No¨ ☐
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.¨ ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large Accelerated Filer¨ Accelerated Filerx Non-Accelerated Filer¨ Smaller Reporting Company¨
Large Accelerated Filer ☐ | Accelerated Filer ☒ | Non-Accelerated Filer ☐ | Smaller Reporting Company ☐ |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes¨ ☐ Nox ☒
State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was sold, or the average bid and asked prices of such common equity, as of the last business day of the registrant's most recently completed second fiscal quarter.
Title of Class | Aggregate Market Value | As of Close of Business On |
Common Stock, par value $.10 per share | $577,826,253 | August |
Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.
Title of Class | Shares Outstanding | As of Close of Business On |
Common Stock, par value $.10 per share | 20,387,169 | May |
DOCUMENTS INCORPORATED BY REFERENCE
Proxy Statement for Annual Meeting of Shareholders to be held July 23, 201321, 2015 incorporated by reference into Part III of this Report.
TABLE OF CONTENTS | ||
Page | ||
PART I | ||
Item 1. | Business | 4 |
Item 1A. | Risk Factors | |
Item 1B. | Unresolved Staff Comments | 19 |
Item 2. | Properties | 19 |
Item 3. | Legal Proceedings | 19 |
Item 4. | Mine Safety Disclosures | 19 |
Executive Officers of the Registrant | 20 | |
PART II | ||
Item 5. | Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities | 22 |
Item 6. | Selected Financial Data | 24 |
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations | 25 |
Factors That May Affect Future Results | 39 | |
Item 7A. | Quantitative and Qualitative Disclosures About Market Risk | 40 |
Item 8. | Financial Statements and Supplementary Data | 40 |
Item 9. | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure | 70 |
Item 9A. | Controls and Procedures | 70 |
Item 9B. | Other Information | 72 |
PART III | ||
Item 10. | Directors, Executive Officers and Corporate Governance | 72 |
Item 11. | Executive Compensation | 72 |
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters | 72 |
Item 13. | Certain Relationships and Related Transactions, and Director Independence | 72 |
Item 14. | Principal Accountant Fees and Services | 72 |
PART IV | ||
Item 15. | Exhibits and Financial Statement Schedules | 73 |
SIGNATURES | 74 | |
FINANCIAL STATEMENT SCHEDULES | ||
Schedule II – Valuation and Qualifying Accounts | 75 | |
EXHIBIT INDEX | 76 |
PART I
ITEM 1. BUSINESS.
General
Park Electrochemical Corp. (“Park”), through its subsidiaries (unless the context otherwise requires, Park and its subsidiaries are hereinafter called the “Company”), is a global advanced materials company which develops, manufactures, markets and sells high-technology digital and radio frequency (“RF”)/microwave printed circuit materials products principally for the telecommunications and internet infrastructure and high-end computing markets and advanced composite materials, parts and assemblies and low-volume tooling products for the aerospace markets. Park’s core capabilities are in the areas of polymer chemistry formulation and coating technology.
Park operates through fully integrated business units in Asia, Europe and North America. The Company's manufacturing facilities are located in Singapore, France, Kansas, Arizona and California. The Company also maintains research and development facilities in Arizona, Kansas and Singapore.
Sales of Park’s printed circuit materials products were 85%78%, 82% and 86%85% of the Company’s total net sales worldwide in the 20132015, 2014 and 20122013 fiscal years, respectively, and sales of Park’s advanced composite materials, parts and assemblies products were 15%22%, 18% and 14%15% of the Company’s total net sales worldwide in the 20132015, 2014 and 20122013 fiscal years, respectively.
Park was founded in 1954 by Jerry Shore, who was the Company’s Chairman of the Board until July 14, 2004.
The sales and long-lived assets of the Company’s operations by geographic area for the last three fiscal years are set forth in Note 14 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report. The Company’s foreign operations are conducted principally by the Company’s subsidiaries in Singapore and France. The Company’s foreign operations are subject to the impact of foreign currency fluctuations. See Note 1 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report.
The Company makes available free of charge on its Internet website, www.parkelectro.com, its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports as soon as reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission. None of the information on the Company's website shall be deemed to be a part of this Report.
AEROGLIDE®, COREFIX®, EASYCURE E-710®, EF®, LD®, MERCURYWAVE®, METEORWAVE®, NELCO®, RTFOIL®, SI® and SI®TIN CITY AIRCRAFT WORKS® are registered trademarks of Park Electrochemical Corp., and ALPHASTRUT™, ELECTROGLIDE™, ELECTROVUE™, EP™, METEORWAVE™, PEELCOTE™, POWERBOND™, and SIGMASTRUT™ and TIN CITY AIRCRAFT WORKS™ are common law trademarks of Park Electrochemical Corp.
Printed Circuit Materials
Printed Circuit Materials - Operations
Printed Circuit Materials - Operations
The Company is a leading global designer and manufacturer of advanced printed circuit materials used to fabricate complex multilayer printed circuit boards and other electronic interconnection systems, such as multilayer back-planes, wireless packages, high-speed/low-loss multilayers and high density interconnects (“HDIs”). The Company’s multilayer printed circuit materials consist of copper-clad laminates and prepregs, which is an acronym for pre-impregnated material. The Company has long-term relationships with its major customers, which include leading independent printed circuit board fabricators, electronic manufacturing service companies, electronic contract manufacturers and major electronic original equipment manufacturers ("OEMs"). Multilayer printed circuit boards and interconnect systems are used in virtually all advanced electronic equipment to direct, sequence and control electronic signals between semiconductor devices (such as microprocessors and memory and logic devices), passive components (such as resistors and capacitors) and connection devices (such as infra-red couplings, fiber optics, compliant pin and surface mount connectors). Examples of end uses of the Company’s digital printed circuit materials include high speed routers and servers, telecommunications switches, storage area networks, supercomputers, satellite switching equipment, and wireless local area networks ("LANs"). The Company's RF/microwave printed circuit materials are used primarily for military avionics, antennas for cellular telephone base stations, automotive adaptive cruise control systems and avionic communications equipment. The Company has developed long-term relationships with major customers as a result of its leading edge products, extensive technical and engineering service support and responsive manufacturing capabilities.
Park believes it founded the modern day printed circuit industry in 1957 by inventing a composite material consisting of an epoxy resin substrate reinforced with fiberglass cloth which was laminated together with sheets of thin copper foil. This epoxy-glass copper-clad laminate system is still used to construct the large majority of today’s advanced printed circuit products. The Company also believes that in 1962 it invented the first multilayer printed circuit materials system used to construct multilayer printed circuit boards. The Company also pioneered vacuum lamination and many other manufacturing technologies used in the industry today. The Company believes it is one of the industry’s technological leaders.
The Company believes that it is one of the world’s largest manufacturers of advanced multilayer printed circuit materials. It also believes that it is one of only a few significant independent manufacturers of high performance multilayer printed circuit materials in the world. The Company was the first manufacturer in the printed circuit materials industry to establish manufacturing presences in the three major global markets of North America, Europe and Asia, with facilities established in Europe in 1969 and Asia in 1986.
Printed Circuit Materials – Industry Background
The printed circuit materials manufactured by the Company and its competitors are used primarily to construct and fabricate complex multilayer printed circuit boards and other advanced electronic interconnection systems. Multilayer printed circuit materials consist of prepregs and copper-clad laminates. Prepregs are chemically and electrically engineered thermosetting
or thermoplastic resin systems which are impregnated into and reinforced by a specially manufactured fiberglass cloth product or other woven or non-woven reinforcing fiber. This insulating dielectric substrate generally is 0.030 inch to 0.002 inch in thickness or less in some cases. While these resin systems historically have been based on epoxy resin chemistry, in recent years, increasingly demanding OEM requirements have driven the industry to utilize proprietary enhanced epoxies as well as other higher performance resins, such as phenolic, bismalimide triazine ("BT"), cyanate ester, enhanced polyimide, non-Methylene Dianiline (“MDA”) polyimide, allylated polyphenylene ether (“APPE”) or polytetrafluoroethylene ("PTFE"). One or more plies of prepreg are laminated together to form an insulating dielectric substrate to support the copper circuitry patterns of a multilayer printed circuit board. Copper-clad laminates consist of one or more plies of prepreg with each ply laminated on the top and bottom with specialty thin copper foil. Copper foil is specially formed in thin sheets which may vary from 0.0056 inch to 0.0002 inch in thickness and normally have a thickness of 0.0014 inch or 0.0007 inch. The Company supplies both copper-clad laminates and prepregs to its customers, which use these products as a system to construct multilayer printed circuit boards.
The printed circuit board fabricator processes copper-clad laminates to form the inner layers of a multilayer printed circuit board. The fabricator photo images these laminates with a dry film or liquid photoresist. After development of the photoresist, the copper surfaces of the laminate are etched to form the circuit pattern. The fabricator then assembles these etched laminates by inserting one or more plies of dielectric prepreg between each of the inner layer etched laminates and also between an inner layer etched laminate and the outer layer copper plane, and then laminating the entire assembly in a press. Prepreg serves as the insulator and bond between the multiple layers of copper circuitry patterns found in the multilayer circuit board. When the multilayer configuration is laminated, these plies of prepreg form an insulating dielectric substrate supporting and separating the multiple inner and outer planes of copper circuitry. The fabricator drills vertical through-holes or vias in the multilayer assembly and then plates the through-holes or vias to form vertical conductors between the multiple layers of circuitry patterns. These through-holes or vias combine with the conductor paths on the horizontal circuitry planes to create a three-dimensional electronic interconnect system. In specialized applications, an additional set of microvia layers (2 or 4, typically) may be added through a secondary lamination process to provide increased density and functionality to the design. The outer two layers of copper foil are then imaged and etched to form the finished multilayer printed circuit board. The completed multilayer board is a three-dimensional interconnect system with electronic signals traveling in the horizontal planes of multiple layers of copper circuitry patterns, as well as in the vertical planes through the plated holes or vias.
Semiconductor manufacturers have introduced successive generations of more powerful microprocessors and memory and logic devices. Electronic equipment manufacturers have designed these advanced semiconductors into more compact products. High performance computing devices in these smaller platforms require greater reliability, faster signal speeds, closer tolerances, higher component and circuit density and increased overall complexity. As a result, the interconnect industry has developed smaller, lighter, faster and more cost-effective interconnect systems, including advanced multilayer printed circuit boards.
Advanced interconnect systems require higher technology printed circuit materials to ensure the performance and reliability of the electronic system and to improve the manufacturability of the interconnect platform. Printed circuit board fabricators and electronic equipment manufacturers require advanced printed circuit materials that have increasingly higher temperature tolerances and more advanced and stable electrical properties in order to support high-speed computing in a miniaturized and often portable environment. Temperature tolerance has been further emphasized by the advent of lead-free assemblies.
With the very high density circuit demands of miniaturized high performance interconnect systems, the uniformity, purity, consistency, performance predictability, dimensional stability and production tolerances of printed circuit materials have become successively more critical. High density printed circuit boards and interconnect systems often involve higher layer count multilayer circuit boards where the multiple planes of circuitry and dielectric insulating substrates are very thin (dielectric insulating substrate layers may be 0.002 inch or less) and the circuit line and space geometries in the circuitry plane are very narrow (0.002 inch or less). In addition, advanced surface mount interconnect systems are typically designed with very small pad sizes and very small plated through-holes or vias which electrically connect the multiple layers of circuitry planes, and these interconnect systems frequently make use of multiple lamination cycles and/or laser drilled vias. High density interconnect systems must utilize printed circuit materials whose dimensional characteristics and purity are consistently manufactured to very high tolerance levels in order for the printed circuit board fabricator to attain and sustain acceptable product yields.
Shorter product life cycles and competitive pressures have induced electronic equipment manufacturers to bring new products to market and increase production volume to commercial levels more quickly. These trends have highlighted the importance of front-end engineering of electronic products and have increased the level of collaboration among system designers, fabricators and printed circuit materials suppliers. As the complexity of electronic products increases, materials suppliers must provide greater technical support to interconnect systems fabricators on a timely basis regarding manufacturability and performance of new materials systems.
Printed Circuit Materials – Products and Services
The Company produces a broad line of advanced printed circuit materials used to fabricate complex multilayer printed circuit boards and other electronic interconnect systems, including backplanes, high speed/low loss multilayers and high density interconnects (“HDIs”). The Company’s diverse advanced printed circuit materials product line is designed to address a wide array of end-use applications and performance requirements.
The Company’s printed circuit materials products have been developed internally and through long-term development projects with its principal suppliers and, to a lesser extent, through licensing arrangements. The Company focuses its research and development efforts on developing industry leading product technology to meet the most demanding product requirements and has designed its product line with a focus on the higher performance, higher technology end of the materials spectrum.
The Company’s products utilize, among other things, high-speed, low-loss, engineered formulations, high-temperature modified epoxies, phenolics, BT epoxies, MDA polyimides, enhanced polyimides, APPE, SI® (Signal Integrity) products, cyanate esters and PTFE formulations for RF/microwave applications.
The Company’s high performance printed circuit materials consist of high-speed, low-loss Cathodic Anodic Filament (“CAF”) resistant materials for digital and RF/microwave applications requiring lead-free compatibility and high bandwidth signal integrity, BT materials, polyimides for applications that demand extremely high thermal performance, cyanate esters, quartz reinforced materials, and PTFE and modified epoxy materials for RF/microwave systems that operate at frequencies up to 77at least 79 GHz.
The Company has developed long-term relationships with select customers through broad-based technical support and service, as well as manufacturing proximity and responsiveness at multiple levels of the customer’s organization. The Company focuses on
developing a thorough understanding of its customer’s business, product lines, processes and technological challenges. The Company seeks customers which are industry leaders committed to maintaining and improving their industry leadership positions and which are committed to long-term relationships with their suppliers. The Company also seeks business opportunities with the more advanced printed circuit fabricators and electronic equipment manufacturers whichwho are interested in maximizing the full value of the products and services provided by their suppliers. The Company believes its proactive and timely support in assisting its customers with the integration of advanced materials technology into new product designs further strengthens its relationships with its customers.
The Company’s emphasis on service and close relationships with its customers is reflected in its short lead times. The Company has developed its manufacturing processes and customer service organizations to provide its customers with printed circuit materials products on a just-in-time basis. The Company believes that its ability to meet its customers' customized manufacturing and quick-turn-around ("QTA") requirements is one of its unique strengths.
Printed Circuit Materials – Customers and End Markets
The Company’s customers for its advanced printed circuit materials include the leading independent printed circuit board fabricators, electronic manufacturing service (“EMS”) companies, electronic contract manufacturers (“ECMs”) and major electronic original equipment manufacturers ("OEMs") in the computer, networking, telecommunications, wireless communications, transportation, aerospace, military, instrumentation and instrumentationautomotive industries located throughout North America, Europe and Asia. The Company seeks to align itself with the larger, more technologically-advanced and better capitalized independent printed circuit board fabricators and major electronic equipment manufacturers which are industry leaders committed to maintaining and improving their industry leadership positions and to building long-term relationships with their suppliers. The Company’s selling effort typically involves several stages and relies on the talents of Company personnel at different levels, from management to sales personnel and quality engineers. In recent years, the Company has augmented its traditional sales personnel with an OEM marketing team and process and product technology specialists.
During the Company’s 20132015 fiscal year, the Company did not have sales to any customer that equaled or exceeded 10% of the Company’s total worldwide sales. During the Company’s 2014 fiscal year, approximately 16.1%15.8% of the Company's total worldwide sales were to TTM Technologies, Inc., a leading manufacturer of printed circuit boards,boards. During the Company’s 2013 fiscal year, approximately 16.1% of the Company’s total worldwide sales were to TTM Technologies, Inc. and approximately 10.1% of the Company'sCompany’s total worldwide sales were to Sanmina-SCI Corporation, a leading electronics contract manufacturer and manufacturer of printed circuit boards. During the Company’s 2012 fiscal year, approximately 15.7% of the Company's total worldwide sales were to TTM Technologies, Inc., approximately 11.5% of the Company's total worldwide sales were to Sanmina-SCI Corporation2014 and approximately 10.0% of the Company’s total worldwide sales were to subsidiaries of Flextronics International Ltd. which are manufacturers of multilayer printed circuit boards. During the Company’s 2013 and 2012 fiscal years, sales to no other customer of the Company equaled or exceeded 10% of the Company’s total worldwide sales.
Although the Company’s printed circuit materials business is not dependent on any single customer, the loss of a major customer or of a group of customers could have a material adverse effect on the Company’s business or its consolidated results of operations or financial position.
The Company’s printed circuit materials products are marketed primarily by sales personnel and, to a lesser extent, by independent distributors and manufacturers’independent sales representatives in industrial centers in Europe and Asia.
Printed Circuit Materials – Manufacturing
The process for manufacturing multilayer printed circuit materials is capital intensive and requires sophisticated equipment as well as clean-room environments. The key steps in the Company’s manufacturing process include: the impregnation of specially designed fiberglass cloth with a specially designed resin system and the partial curing of that resin system; the assembling of laminates consisting of single or multiple plies of prepreg and copper foil in a clean-room environment; the vacuum lamination of the copper-clad assemblies under simultaneous exposure to heat, pressure and vacuum; and the finishing of the laminates to customer specifications.
Prepreg is manufactured in a treater. A treater is a roll-to-roll continuous machine which sequences specially designed fiberglass cloth or other reinforcement fabric into a resin tank and then sequences the resin-coated cloth through a series of ovens which partially cure the resin system into the cloth. This partially cured product or prepreg is then sheeted or paneled and packaged by the Company for sale to customers, or used by the Company to construct its copper-clad laminates.
The Company manufactures copper-clad laminates by first setting up in a clean room an assembly of one or more plies of prepreg stacked together with a sheet of specially manufactured copper foil on the top and bottom of the assembly. This assembly, together with a large quantity of other laminate assemblies, is then inserted into a large, multiple opening vacuum lamination press. The laminate assemblies are then laminated under simultaneous exposure to heat, pressure and vacuum. After the press cycle is complete, the laminates are removed from the press and sheeted, paneledsheared and finished to customer specifications. The product is then inspected and packaged for shipment to the customer.
The Company manufactures multilayer printed circuit materials at four fully integrated facilities located in the United States, Europe and Southeast Asia. The Company opened its California facility in 1965, its Arizona facility in 1984, its Singapore facility in 1986 and its France facility in 1992. The Company services the North American market principally through its United States manufacturing facilities, the European market principally through its manufacturing facilities in the United States and in France, and the Asian market principally through its Singapore manufacturing facility. During the 20112014 fiscal year, the Company modified certain of the equipment in its printed circuit materials manufacturing facility in Singapore so that it can treatto support the production of PTFE based circuitry material in Asia. In addition, during the 2012 fiscal year, the Company completed an expansion of its printed circuit materials treating operation in Singapore with the installation of an additional advanced, high-speed treater.laminates and other laminates requiring elevated process temperatures. By maintaining technical and engineering staffs at each of its manufacturing facilities, the Company is able to deliver fully-integrated products and services on a timely basis.
Printed Circuit Materials – Materials and Sources of Supply
The principal materials used in the manufacture of the Company’s printed circuit materials products are specially manufactured copper foil, fiberglass and quartz cloth and synthetic reinforcements, and specially formulated resins and chemicals. The Company develops and maintains close working relationships with suppliers of these materials who have dedicated themselves to complying with the Company’s stringent specifications and technical requirements. While the Company’s philosophy is to work with a limited number of suppliers, the Company has identified alternate sources of supply for many, but not all, of these materials. However, there are a limited number of qualified suppliers of these materials, in some cases substitutes for these materials are not always readily available, and, in the past, the industry has experienced shortages in the market for certain of these materials. While the Company considers its relationships with its suppliers to be strong, a shortage of these materials or a
disruption of the supply of materials caused by a natural disaster, such as the temporary disruption caused by the earthquake and tsunami in Japan in March 2011, or otherwise, could materially increase the Company’s cost of operations and could materially adversely affect the business and results of operations of the Company. The Company experienced a supply chain issue as a result of the earthquake and tsunami in Japan in March 2011. Such issue was resolved during the 2012 fiscal year third quarter.
Significant increases in the cost of materials purchased by the Company could also have a material adverse effect on the Company’s business and results of operations if the Company were unable to pass such increases through to its customers. During the 2011, 20122015, 2014 and 2013 fiscal years, the Company experienced significant volatility in the cost of copper foil, one of the Company’s primary raw materials, andmaterials. The Company generally passes changes in the Company passed substantial portionscosts of such increasesits raw materials through to its customers.
Printed Circuit Materials – Competition
The multilayer printed circuit materials industry is characterized by intense competition and ongoing consolidation. The Company’s competitors are primarily divisions or subsidiaries of very large, diversified multinational manufacturers which are substantially larger and have greater financial resources than the Company and, to a lesser degree, smaller regional producers. Because the Company focuses on the higher technology segment of the printed circuit materials market, technological innovation, quality and service, as well as price, are significant competitive factors.
The Company believes that there are several significant multilayer printed circuit materials manufacturers in the world and many of these competitors have significant presences in the three major global markets of North America, Europe and Asia. The Company believes that it is currently one of the world’s largest advanced multilayer printed circuit materials manufacturers. The Company further believes it is one of only a few significant independent manufacturers of multilayer printed circuit materials in the world today.
The markets in which the Company’s printed circuit materials operations compete are characterized by rapid technological advances, and the Company’s position in these markets depends largely on its continued ability to develop technologically advanced and highly specialized products. Although the Company believes it is an industry technology leader and directs a significant amount of its time and resources toward maintaining its technological competitive advantage, there is no assurance that the Company will be technologically competitive in the future, or that the Company will continue to develop new products that are technologically competitive.
Advanced Composite Materials, Parts and Assemblies
Advanced Composite Materials, Parts and Assemblies - Operations
The Company also develops and manufactures engineered, advanced composite materials and advanced composite parts and assemblies and low-volume tooling for the aerospace markets and prototype tooling for such parts and assemblies.
The Company’s advanced composite materials are developed and manufactured by the Company’s Park Aerospace Technologies Corp. (“PATC”) business unit located at the Newton, Kansas Airport and by the Company’s Nelco Products Pte. Ltd. business unit in Singapore, and, until it closed in the 2013 fiscal year third quarter, by the Company’s Park Advanced Composite Materials, Inc. (“PACM”) business unit located in Waterbury, Connecticut, which was named Nelcote, Inc. from May 2006 to March 2008 and which was named FiberCote Industries, Inc.
prior to May 2006.Singapore. The Company’s advanced composite parts and assemblies and low-volume tooling are also developed and manufactured by the Company’s PATC business unit.
In the 2012 fiscal year third quarter, the Company completed a major expansion of its PATC aerospace composite materials development and manufacturing facility in Kansas in order to manufacture aerospace composite parts and assemblies in the same facility as advanced composite materials, which are used in the manufacture of such parts and assemblies. The expansion consisted of approximately 37,000 square feet of manufacturing and storage space and included both oven and autoclave composite parts curing equipment and capability, and the Company spent approximately $5 million on the facility expansion and equipment.
Following the expansion of PATC, the Company transferred the aerospace composite parts and assemblies manufacturing activities of its Park Aerospace Structures Corp. (“PASC”) business unit in Lynnwood, Washington to PATC and closed PASC in the 2012 fiscal year fourth quarter, and the Company transferred PACM’s aerospace composite materials manufacturing activities to PATC and closed PACM in the 2013 fiscal year third quarter. The activities of PASC which were transferred to PATC included the assets and business of Nova Composites, Inc., which PASC acquired in April 2008.
Such transfer of aerospace composite materials manufacturing activities from PACM to PATC and the transfer of aerospace composite parts and assemblies manufacturing activities from PASC to PATC completed the Company’s plan to concentrate and consolidate all of its North American aerospace composite materials, parts and assemblies manufacturing, development and design activities at PATC.
The PATC facility expansion and the transfer of manufacturing activities from PACM and PASC to PATC enable PATC to offeroffers a full range of advanced composite materials manufacturing capability, as well as composite parts design, assembly and production capability, all in its Newton facility. PATC offers composite aircraft and space vehicle parts design and assembly services, in addition to “build-to-print” services. The Company believes that the ability of its PATC facility to offer such a wide and comprehensive array of composite materials and parts manufacturing and development technology and capability to the aircraft and space vehicle industries provides attractive benefits and advantages to those industries.
Advanced Composite Materials, Parts and Assemblies – Industry Background
The advanced composite materials manufactured by the Company and its competitors are used primarily to fabricate light-weight, high-strength structures with specifically designed performance characteristics. Composite materials are typically highly specified combinations of resin formulations and reinforcements. Reinforcements can be unidirectional fibers, woven fabrics, or non-woven goods such as mats or felts. Reinforcement materials are constructed of E-glass (fiberglass), carbon fiber, S2 glass, aramids, such as Kevlar® ("Kevlar" is a registered trademark of E.I. du Pont de Nemours & Co.) and Twaron® (“Twaron” is a registered trademark of Teijin Twaron B.V. LLC), quartz, polyester and other synthetic materials. Resin formulations are typically highly proprietary, and include various chemical and physical mixtures. The Company produces resin formulations using various epoxies, polyesters, phenolics, cyanate esters, polyimides and other complex matrices. The reinforcement combined with the resin is referred to as a “prepreg”, which is an acronym for pre-impregnated material.. Advanced composite materials can be broadly categorized as either a thermoset or a thermoplastic. While both material types require the addition of heat to form a consolidated laminate, thermoplastics can be reformed using additional heat. Once fully cured, thermoset materials can notcannot be further reshaped. The Company believes that the demand for thermoset advanced materials is greater than that for thermoplastics due to the fact that fabrication processes for thermoplastics require
much higher temperatures and pressures and are, therefore, typically more capital intensive than the fabrication processes for thermoset materials.
The advanced composite materials industry suppliers have historically been large chemical corporations. During the past ten years, considerable consolidation has occurred in the industry, resulting in three relatively large composite materials suppliers and a number of smaller suppliers.
The Company works with aerospace original equipment manufacturers (“OEMs”), such as general aviation aircraft manufacturers, and certain tier I suppliers to qualify its advanced composite materials or parts and assemblies for use on current and upcoming programs. The Company’s customers typically design and specify a material specifically to meet the needs of the part’s end use and the customers’ processing methods. Such customers sometimes work with a supplier to develop the specific resin system and reinforcement combination to match the application. The Company’s customers’ processing, or the Company’s processing, may include hand lay-up, resin infusion or more advanced automated lay-up processes. Automated lay-up processes include automated tape lay-up, (“ATL”),automated fiber placement and filament winding. These fabrication processes significantly alter the material form purchased. After the lay-up process is completed, the material is cured by the addition of heat and pressure. Cure processes typically include vacuum bag oven curing, high pressure autoclave, press forming and before-press curing. After the part has been cured, final finishing and trimming, and assembly of the structure, is performed by the fabricator or the Company.
Advanced Composite Materials, Parts and Assemblies – Products
The advanced composite materials products manufactured by the Company are primarily thermoset curing prepregs. By analyzing the needs of the markets in which it participates, and working with its customers, theThe Company has developed proprietary resin formulations to suit the needs of the markets in which it participates by analyzing the needs of the markets and working with its markets.customers. The complex process of developing resin formulations and selecting the proper reinforcement is accomplished through a collaborative effort of the Company’s research and development and technical sales and marketing resources working with the customers’ technical staff. The Company focuses on developing a thorough understanding of its customers’ businesses, product lines, processes and technical challenges. The Company believes that it develops innovative solutions which utilize technologically advanced materials and concepts for its customers.
The Company’s advanced composite materials products include prepregs manufactured from proprietary formulations using modified epoxies, phenolics, polyesters, cyanate esters and polyimides combined with woven, non-woven and unidirectional reinforcements. Reinforcement materials used to produce the Company’s products include polyacrylonitrile (“PAN”) based carbons, E-glass, S2 glass, polyester, quartz, carbonized rayon, carbon fiber, aramids, such as Kevlar® (“Kevlar” is a registered trademark of E.I. du Pont de Nemours & Co.), Twaron® (“Twaron” is a registered trademark of Teijin Twaron B.V. LLC), polyester and other synthetic materials. The Company also sells certain specialty fabrics, such as Raycarb C2, a carbonized rayon fabric produced by Airbus Safran Launchers SAS (formerly Herakles, (formerlyformerly Snecma Propulsion Solide) and used mainly in the rocket motor industry.
The Company’s composite parts and assemblies are manufactured with carbon, fiberglass and other reinforcements impregnated with formulated resins. Certain of these impregnated reinforcements, or prepregs, are also manufactured by PATC.
Advanced Composite Materials, Parts and Assemblies – Customers and End Markets
The Company’s advanced composite materials, parts and assemblies customers include manufacturers in the aerospace, fixed and rotary wing aircraft, rocket motor, electronics, RF and specialty industrial markets. The Company’s materials are marketed primarily by sales personnel and, to a lesser extent, by independent distributors and independent sales representatives.
While no single advanced composite materials, parts and assemblies customer accounted for 10% or more of the Company’s total sales during either of the last two fiscal years, the loss of a major customer or of a group of some of the largest customers of the Company’s advanced composite materials, parts and assemblies product line could have a material adverse effect on such product line.
The Company’s aerospace customers include fabricators of aircraft composite parts and assemblies. The Company’s advanced composite materials are used by such fabricators and by the Company to produce primary and secondary structures, aircraft interiors and various other aircraft components. The majority of the Company’s customers for aerospace materials, and the Company itself, do not produce parts and assemblies for commercial aircraft butand for the general aviation and business aviation, kit aircraft and military markets. Many of the Company’s composite materials are used in the manufacture of aircraft certified by the Federal Aviation Administration (the “FAA”).
Customers for the Company’s rocket motor materials include United States defense prime contractors and subcontractors. These customers fabricate rocket motors for heavy lift space launchers, strategic defense weapons, tactical motors and various other applications. The Company’s materials are used to produce heat shields, exhaust gas management devices and insulative and ablative nozzle components. Rocket motors are primarily used for commercial and military space launch, and for tactical and strategic weapons. The Company also has customers for these materials outside of the United States.
The Company also sells composite materials for use in RF electrical applications. Customers buying these materials typically fabricate antennas and radomes engineered to preserve electrical signal integrity. A radome is a protective cover over an electrical antenna or signal generator. The radome is designed to minimize signal loss and distortion.
Advanced Composite Materials, Parts and Assemblies – Manufacturing
The Company’s manufacturing facilities for advanced composite materials are currently located in Newton, Kansas and in Singapore, , and its manufacturing facility for composite parts and assemblies is also located in Newton, Kansas. See “Advanced Composite Materials, Parts and Assemblies - Operations” elsewhere in this Report.
The process for manufacturing composite materials, parts and assemblies is capital intensive and requires sophisticated equipment, significant technical know-how and very tight process controls. The key steps used in the manufacturing process include chemical reactors, resin mixing, reinforcement impregnation, resin film casting and solvent drying processes.
Prepreg is manufactured by the Company using either solvent (solution) coating methods on a treater or by hot melt impregnation. A solution treater is a roll-to-roll continuous process machine which sequences reinforcement through tension controllers and combines solvated resin with the reinforcement. The reinforcement is dipped in resin, passed through a drying oven which removes the solvent and advances (or partially cures) the resin. The prepreg material is interleafed with a carrier and cut to the roll lengths desired by the customer. The Company also manufactures prepreg using hot melt impregnation methods which use no
solvent. Hot melt prepreg manufacturing is achieved by mixing a resin formulation in a heated resin vessel, casting a thin film on a carrier paper, and laminating the reinforcement with the resin film.
The Company also completes additional processing services, such as toll coating, slitting, sheeting, biasing, sewing and cutting, if needed by the customer. Many of the products manufactured by the Company also undergo extensive testing of the chemical, physical and mechanical properties of the product. These testing requirements are completed in the laboratories and facilities located at the Company’s manufacturing facilities. The Company’s laboratories have been approved by several aerospace OEMs, and the Company has achieved certification pursuant to the National Aerospace and Defense Contractors Accreditation Program (“NADCAP”) for both non-metallic materials manufacturing and testing and composites fabrication. After all the processing has been completed, the product is inspected and packaged for shipment to the customer. The Company typically supplies final product to the customer in roll or sheet form. The Company’s PATC facility has received accreditation by NADCAP for composite parts manufacturing and for composite materials manufacturing, and the Company believes that the PATC facility is one of the few facilities in the world with NADCAP accreditation for manufacturing both composite materials and composite parts.
Advanced Composite Materials, Parts and Assemblies – Materials and Sources ofSupply
The Company designs and manufactures its advanced composite materials to its own specifications and to the specifications of its customers. Product development efforts are focused on developing prepreg materials that meet the specifications of the customers. The materials used in the manufacture of these engineered materials include graphite and carbon fibers and fabrics, aramids, such as Kevlar® (“Kevlar”("Kevlar" is a registered trademark of E.I. du Pont de Nemours & Co.) and Twaron® (“Twaron” is a registered trademark of Teijin Twaron B.V. LLC), quartz, fiberglass, polyester, specialty chemicals, resins, films, plastics, adhesives and certain other synthetic materials. The Company purchases these materials from several suppliers. Substitutes for many of these materials are not readily available. The qualification and certification of advanced composite materials for certain FAA certified aircraft typically include specific requirements for raw material supply and may restrict the Company’s flexibility in qualifying alternative sources of supply for certain key raw materials. The Company continues to work to determine acceptable alternatives for several raw materials.
The Company manufactures composite parts and assemblies primarily to its customers’ specifications using its own composite materials.materials or composite materials supplied by third parties, based on the specific requirements of the Company’s customers.
Advanced Composite Materials, Parts and Assemblies – Competition
The Company has many competitors in the advanced composite materials, parts and assemblies markets, ranging in size from large international corporations to small regional producers. Several of the Company’s largest competitors are vertically integrated, producing raw materials, such as carbon fiber and cloth, as well as composite parts and assemblies. Some of the Company’s competitors may also serve as a supplier to the Company. The Company competes for business primarily on the basis of responsiveness, product performance, product qualification, FAA data base design allowables and innovative new product development and price.development.
Backlog
The Company recognizesconsiders an item as backlog when it receives a purchase order specifying the number of units to be purchased, the purchase price, specifications and other customary terms and conditions. At April 28, 2013,26, 2015, the unfilled portion of all purchase orders received by the Company and believed by it to be firm was approximately $9,174,000,$28,147,000, compared to $8,051,000$33,755,000 at April 29, 2012.27, 2014. A major portion of the Company’s backlog consists of composite materials.
Various factors contribute to the size of the Company’s backlog. Accordingly, the foregoing information may not be indicative of the Company’s results of operations for any period subsequent to the fiscal year endedMarch 3, 2013.1, 2015.
Patents and Trademarks
The Company holds several patents and trademarks or licenses thereto. In the Company’s opinion, some of these patents and trademarks are important to its products. Generally, however, the Company does not believe that an inability to obtain new,new; or to defend existing, patents and trademarks would have a material adverse effect on the Company.
Employees
At March 3, 2013,1, 2015, the Company had 535461 employees. Of these employees, 467395 were engaged in the Company’s manufacturing operations, and 6866 consisted of executive, sales and marketing and research and development personnel and general administrative staff.
Environmental Matters
The Company is subject to stringent environmental regulation of its use, storage, treatment and disposal of hazardous materials and the release of emissions into the environment. The Company believes that it currently is in substantial compliance with the applicable Federal, state and local and foreign environmental laws and regulations to which it is subject and that continuing compliance therewith will not have a material effect on its capital expenditures, earnings or competitive position. The Company does not currently anticipate making material capital expenditures for environmental control facilities for its existing manufacturing operations during the remainder of its current fiscal year or its succeeding fiscal year. However, developments, such as the enactment or adoption of even more stringent environmental laws and regulations, could conceivably result in substantial additional costs to the Company.
The Company and certain of its subsidiaries have been named by the Environmental Protection Agency (the “EPA”) or a comparable state agency under the Comprehensive Environmental Response, Compensation and Liability Act (the “Superfund Act”) or similar state law as potentially responsible parties in connection with alleged releases of hazardous substances at four sites. In addition, a subsidiary of the Company has received a cost recovery claim under a state law similar to the Superfund Act from another private party involving one other site.
Under the Superfund Act and similar state laws, all parties who may have contributed any waste to a hazardous waste disposal site or contaminated area identified by the EPA or comparable state agency may be jointly and severally liable for the cost of cleanup. Generally, these sites are locations at which numerous persons disposed of hazardous waste. In the case of the Company’s subsidiaries, generally the waste was removed from their manufacturing facilities and disposed at the waste sites by various companies which contracted with the subsidiaries to provide waste disposal services. Neither the Company nor any of its subsidiaries has been accused of or charged with any wrongdoing or illegal acts in connection with any such sites. The Company believes it maintains an effective and comprehensive environmental compliance program. Management believes the ultimate disposition of known environmental matters will not have a material adverse effect on the liquidity, capital resources, business, consolidated results of operations or financial position of the Company.
See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters” included in Item 7 of Part II of this Report and Note 13 of the Notes to Consolidated Financial Statements included in Item 8 of Part II of this Report.
ITEM 1A. RISK FACTORS.
The business of the Company faces numerous risks, including those set forth below or those described elsewhere in this Form 10-K Annual Report or in the Company's other filings with the Securities and Exchange Commission. The risks described below are not the only risks that the Company faces, nor are they necessarily listed in order of significance. Other risks and uncertainties may also affect the Company’s business. Any of these risks may have a material adverse effect on the Company's business, financial condition, results of operations or cash flow.
The industries in which the Company operates are undergoing technological changes, and the Company's business could suffer if the Company is unable to adjust to these changes.
The Company's operating results could be negatively affected byif the Company's inabilityCompany were unable to maintain and increase its technological and manufacturing capability and expertise. Rapid technological advances in semiconductors and electronic equipment have placed rigorous demands on the printed circuit materials manufactured by the Company and used in printed circuit board production.
The industries in which the Company operates are very competitive.
Certain of the Company's principal competitors are substantially larger and have greater financial resources than the Company, and the Company's operating results will be affected by its ability to maintain its competitive positions in these industries. The printed circuit materials, advanced composite materials and composite parts and assemblies industries are intensely competitive and the Company competes worldwide in the markets for such products.
The Company is vulnerable to an increase in the cost of gas or electricity.
Changes in the cost or availability of gas or electricity could materially increase the Company's cost of operations. The Company's production processes require the use of substantial amounts of gas and electricity, the cost and available supply of which are beyond the control of the Company.
The Company’s cost of sales and results of operations were affected by increases in utility costs in the Company’s fiscal year ended February 26, 2012. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 of Part II of this Report.
The Company is vulnerable to disruptions and shortages in the supply of, and increases in the prices of, certain raw materials.
There are a limited number of qualified suppliers of the principal materials used by the Company in its manufacture of printed circuit materials, advanced composite materials and composite parts and assemblies. The Company has qualified alternate sources of supply for many, but not all, of its raw materials, but certain raw materials are produced by only one supplier. In some cases, substitutes for certain raw materials are not always readily available, and in the past there have been shortages in the market for certain of these materials. Raw material substitutions for certain aircraft related products may require governmental (such as
Federal Aviation Administration) approval. While the Company considers its relationships with its suppliers to be strong, a shortage of these materials or a disruption of the supply of these materials caused by a natural disaster, such as the earthquake and tsunami in Japan in March 2011, or otherwise could materially increase the Company’s cost of operations and could materially adversely affect the business and results of operations of the Company. Likewise, significant increases in the cost of materials purchased by the Company could also materially increase the Company’s cost of operations and could have a material adverse effect on the Company’s business and results of operations if the Company were unable to pass such increases through to its customers. The Company experienced a supply chain issue as a result of the earthquake and tsunami in Japan in March 2011. Such issue was resolved during the 2012 fiscal year third quarter.
During the 2011, 20122013, 2014 and 20132015 fiscal years, the Company experienced significant volatility in the cost of copper foil, one of the Company’s primary raw materials, andmaterials. The Company generally passes changes in the Company passed substantial portionscosts of such increasesits raw materials through to its customers. See “Business—Printed Circuit Materials—Materials and Sources of Supply” in Item 1 of Part I of this Report and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 of Part II of this Report.
The Company's customer base is highly concentrated, and the loss of one or more customers could adversely affect the Company's business.
A loss of one or more key customers could adversely affect the Company's profitability. The Company's customer base is concentrated, in part, because the Company's business strategy has been to develop long-term relationships with a select group of customers. During the Company's fiscal yearyears ended March 1, 2015, March 2, 2014 and March 3, 2013, the Company's ten largest customers accounted for approximately 53%, 59% and 63%, respectively, of net sales. The Company expects that sales to a relatively small number of customers will continue to account for a significant portion of its net sales for the foreseeable future. See "Business—Printed Circuit Materials—Customers and End Markets” and “Business—Advanced Composite Materials, Parts and Assemblies—Customers and End Markets” in Item 1 of Part I of this Report.
The Company's business is dependent on the electronics and aerospace industries, which are cyclical in nature.
The electronics and aerospace industries are cyclical and have experienced recurring cycles. The downturns, such as occurred in the electronics industry during the first quarter of the Company's fiscal year ended March 3, 2002 and in the general aviation industry in the fourth quarter of the Company’s 2009 fiscal year, can be unexpected and have often reduced demand for, and prices of, printed circuit materials and advanced composite materials, parts and assemblies. This potential reduction in demand and prices could have a negative impact on the Company’s business.
In addition, the Company is subject to the effects of general regional and global economic and financial conditions, such as the worldwide economic and financial crises that commenced in the second half of the Company’s fiscal year ended March 1, 2009.
The Company relies on short-term orders from its customers.
A variety of conditions, both specific to the individual customer and generally affecting the customer’s industry, can cause a customer to reduce or delay orders previously anticipated by the Company, which could negatively impact the Company’s business. In the printed circuit materials market, the Company typically does not obtain long-term purchase orders or
commitments. Instead, it relies primarily on continual communication with its customers to anticipate the future volume of purchase orders.
The Company’s customers may require the Company to undergo a lengthy and expensive qualification process with respect to its products, with no assurance of sales. Any delay or failure in such qualification process could negatively affect the Company’s business and operating results.
The Company’s customers frequently require that the Company’s products undergo an extensive qualification process, which may include testing for performance, structural integrity and reliability. This qualification process may be lengthy and does not assure any sales of the product to that customer. The Company devotes substantial resources, including design, engineering, sales, marketing and management efforts, and often substantial expense, to qualifying the Company’s products with customers in anticipation of sales. Any delay or failure in qualifying any of its products with a customer may preclude or delay sales of those products to the customer, which may impede the Company’s growth and cause its business to suffer.
In addition, the Company engages in product development efforts with OEMs. The Company will not recover the cost of this product development directly even if the Company actually produces and sells any resulting product. There can be no guarantee that such efforts will result in any sales.
Consolidation among the Company’s customers could negatively impact the Company’s business.
A number of the Company’s customers have combined in recent years and consolidation of other customers may occur. If an existing customer is not the controlling entity following a combination, the Company may not be retained as a supplier. While there is potential for increasing the Company’s position with the combined customer, the Company’s revenues may decrease if the Company is not retained as a supplier.
The Company faces extensive capital expenditure costs.
The Company’s business is capital intensive and, in addition, the introduction of new technologies could substantially increase the Company’s capital expenditures. In order to remain competitive the Company must continue to make significant investments in capital equipment and expansion of operations, which could adversely affect the Company’s results of operations.
The Company’s international operations are subject to different and additional risks than the Company’s domestic operations.
The Company’s international operations are subject to various risks, including unexpected changes in regulatory requirements, foreign currency exchange rates, tariffs and other barriers, political and economic instability, potentially adverse tax consequences, and any impact on economic and financial conditions around the world resulting from geopolitical conflicts or acts of terrorism, all of which could negatively impact the Company’s business. A portion of the sales and costs of the Company’s international operations are denominated in currencies other than the U.S. dollar and may be affected by fluctuations in currency exchange rates.
The Company is subject to a variety of environmental regulations.
The Company’s production processes require the use, storage, treatment and disposal of certain materials which are considered hazardous under applicable environmental laws, and the Company is subject to a variety of regulatory requirements relating to the handling of such materials and the release of emissions and effluents into the environment, non-compliance with which could have a negative impact on the Company’s business or consolidated results of operations. Other possible developments, such as the enactment or adoption of additional environmental laws, could result in substantial costs to the Company.
If the Company’s efforts to protect its trade secrets are not sufficient, the Company may be adversely affected.
The Company’s business relies upon proprietary information, trade secrets and know-how in its product formulations and its manufacturing and research and development activities. The Company takes steps to protect its proprietary rights and information, including the use of confidentiality and other agreements with employees and consultants and in commercial relationships, including with distributors and customers. If these steps prove to be inadequate or are violated, the Company’s competitors might gain access to the Company’s trade secrets, and there may be no adequate remedy available to the Company
The Company depends upon the experience and expertise of its senior management team and key technical employees, and the loss of any key employee may impair the Company’s ability to operate effectively.
The Company’s success depends, to a certain extent, on the continued availability of its senior management team and key technical employees. Each of the Company’s executive officers, key technical personnel and other employees could terminate his or her employment at any time. The loss of any member of the Company’s senior management team might significantly delay or prevent the achievement of the Company’s business objectives and could materially harm the Company’s business and customer relationships. In addition, because of the highly technical nature of the Company’s business, the loss of any significant number of the Company’s key technical personnel could have a material adverse effect on the Company.
ITEM 1B. UNRESOLVED STAFF COMMENTS.
None.
ITEM 2. PROPERTIES.
Set forth below are the locations of the significant properties owned and leased by the Company, the businesses which use the properties and the size of each such property. All of such properties, except for the Melville, New York property, are used principally as manufacturing and warehouse facilities.
Location | Owned or | Use | Size (Square | |||||
Melville, NY | Leased | Administrative Offices | 8,000 | |||||
Fullerton, CA | Leased | Printed Circuit Materials | 95,000 | |||||
Anaheim, CA | Leased | Printed Circuit Materials | 26,000 | |||||
Tempe, AZ | Leased | Printed Circuit Materials | 81,000 | |||||
Lannemezan, France | Owned | Printed Circuit Materials | 29,000 | |||||
Singapore | Leased | Printed Circuit Materials | 88,000 | |||||
Newton, KS | Leased | Advanced | 89,000 | |||||
Singapore | Leased | Advanced | 21,000 |
The Company believes its facilities and equipment to be in good condition and reasonably suited and adequate for its current needs. Most of the Company’s manufacturing facilities have the capacity to substantially increase their production levels.
In the 2013 fiscal year third quarter, the Company closed its PACMPark Advanced Composite Materials, Inc. (“PACM”) facility, located in Waterbury, Connecticut, after the completion of the transfer of PACM’s aerospace composite materials manufacturing activities to PATC. In the 2013 fiscal year second quarter, the Company closed its Nelco Technology (Zhuhai FTZ) Ltd. facility located in the Free Trade Zone in Zhuhai, China and transferred the manufacturing activities conducted by such business unit to the Company’s Nelco Products Pte. Ltd. business unit located in Singapore.
In the third quarter of the Company’s 2012 fiscal year, the Company completed a major expansion of its aerospace composite materials development and manufacturing facility in Newton, Kansas in order to manufacture aerospace composite parts and assemblies in the same facility as advanced composite materials, which are used in the manufacture of such parts and assemblies. The expansion consisted of approximately 37,000 square feet of manufacturing and storage space, and the Company spent approximately $5 million on the facility expansion and equipment. See “Advanced Composite Materials, Parts and Assemblies” elsewhere in this Report.
In June 2012, Isola USA Corporation (“Isola”) filed a complaint against the Company and its Nelco Products, Inc. and Neltec, Inc. subsidiaries in the United States District Court for the District of Arizona, in Phoenix, Arizona, alleging that the sales of certain products by the Company and the two aforementioned subsidiaries in the United States infringe two United States patents owned by Isola. Isola amended the complaint in August 2012 to add a third United States patent. In the complaint, as amended, Isola sought an injunction against the Company and the two aforementioned subsidiaries and unspecified damages.ITEM 3. LEGAL PROCEEDINGS.
In February 2013, Isola and the Company reached an agreement in which all issues between the parties were settled. Isola dismissed its complaint against the Company in exchange for certain monetary and other consideration, and the Company agreed that it would refrain from challenging the validity or enforceability of any of the applicable patents.None.
ITEM 4. MINE SAFETY DISCLOSURES.
None.
Executive Officers of the Registrant.
Name | Title | Age | ||||
Brian E. Shore | Chief Executive Officer, and a Director | 63 | ||||
Christopher T. Mastrogiacomo | President and | 57 | ||||
Stephen E. Gilhuley | Executive Vice President-Administration and Secretary | 70 | ||||
P. Matthew Farabaugh | Vice President and Chief | 54 | ||||
Constantine Petropoulos | Vice President and General Counsel | 37 | ||||
Mark A. Esquivel | Vice | 42 |
Mr. Shore has served as a Director of the Company since 1983 and as Chairman of the Board of Directors since July 2004. He was elected a Vice President of the Company in January 1993, Executive Vice President in May 1994, President in March 1996, and Chief Executive Officer in November 1996. He was President until July 28, 2014, when he was succeeded by Mr. Mastrogiacomo. Mr. Shore also served as General Counsel of the Company from April 1988 until April 1994.
Mr. GilhuleyMastrogiacomo was elected Executive Vice President – Administrationand Chief Operating Officer on April 5, 2012, and he has been Secretary of the Company since July 1996. Prior to April 5, 2012, he had been Executive Vice President of the Company since October 2006 and Senior Vice President from March 2001 to October 2006. He also was General Counsel of the Company from April 1994 to October 31, 2011, when he was succeeded by Mr. Banker.
Mr. Mastrogiacomo was elected28, 2014 after having served as Executive Vice President and Chief Operating Officer onsince June 1, 2011 after having servedand as Senior Vice President of Strategic Marketing since December 8, 2010. Prior to joining the Company as Vice President of Strategic Marketing in September 2010, Mr. Mastrogiacomo held senior management positions with Sanmina-SCI Corporation, a leading electronics contract manufacturing services company, and its predecessor, Hadco Corporation, a major manufacturer of advanced electronic interconnect systems. Since 2008, Mr. Mastrogiacomo was Senior Vice President, Printed Wiring Board (USA) of Sanmina-SCI Corporation; from 2004 to 2008, he was Senior Vice President of Operations, the Americas Enclosures Systems of Sanmina-SCI; and from 2000 to 2004, he was Senior Vice President, Printed Wiring Board Operations of Sanmina-SCI. During the twelve years prior to 1997, he held several management positions with Hadco Corporation.
Mr. BankerGilhuley was elected Executive Vice President – Administration on April 5, 2012, and he has been Secretary of the Company since July 1996. Prior to April 5, 2012, he had been Executive Vice President of the Company since October 2006 and Senior Vice President from March 2001 to October 2006. He also was General Counsel of the Company from April 1994 to October 2011, when he was succeeded by Stephen M. Banker, who was Vice President and General Counsel onfrom October 31, 2011. Prior2011 to joining the Company,May 2014 and who was succeeded by Mr. Banker had been a lawyer in the Skadden, Arps, Slate, Meagher & Flom LLP law firm in New York City since 1977 and a partner in the firm since 1985.Petropoulos.
Mr. Farabaugh was elected Vice President and Chief Financial Officer on April 9, 2012. He had been Vice President and Controller of the Company since October 2007. Prior to joining Park,the Company, Mr. Farabaugh was Corporate Controller of American Technical Ceramics, a publicly traded international company and a manufacturer of electronic components, located in Huntington Station, New York, from 2004 to September 2007 and Assistant Controller from 2000 to 2004. Prior thereto, Mr. Farabaugh was Assistant Controller of Park Electrochemical Corp. from 1989 to 2000. Prior to joining Park in 1989, Mr. Farabaugh had been a senior accountant with KPMG.
Mr. Petropoulos was elected Vice President and General Counsel on September 4, 2014. Prior to joining the Company, Mr. Petropoulos had been Managing Attorney at Scientific Games Corporation in New York City since November 2011. From September 2007 to October 2011, he was Senior Corporate Counsel, Finance & Strategic Development, at Coca-Cola HBC SA in Attica, Greece; and from October 2002 to September 2007 he was an attorney at Latham & Watkins LLP in New York City.
Mr. Esquivel was appointed Vice President- Aerospace of the Company in April 2015. Mr. Esquivel was also appointed as President of the Company’s PATC business unit in Newton, Kansas. Mr. Esquivel has been employed by the Company and its subsidiaries in various positions since 1994. He was Vice President of Aerospace Composite Parts of PATC from March 2012 to April 2015 and President of PATC from June 2010 to March 2012. Prior to June 2010, Mr. Esquivel was Vice President and General Manager of Neltec, Inc., the Company’s high-technology circuitry materials business unit located in Tempe, Arizona, and responsible for the day-to-day operations of Neltec, Inc., since his appointment to that position in September 2008. He served as Manufacturing Manager of Neltec, Inc. from August 2004 to September 2008 and as Materials Manager from February 2001 to August 2004, and he held various positions since he originally joined Neltec, Inc. in 1994.
There are no family relationships between the directors or executive officers of the Company.
Each executive officer of the Company serves at the pleasure of the Board of Directors of the Company.
PART II
ITEM 5. MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.
The Company’s Common Stock is listed and trades on the New York Stock Exchange (trading symbol PKE). (The Common Stock also trades on the Chicago Stock Exchange.) The following table sets forth, for each of the quarterly periods indicated, the high and low sales prices for the Common Stock as reported on the New York Stock Exchange Composite Tape and dividends declared on the Common Stock.
For the Fiscal Year Ended | Stock Price | Dividends | Stock Price | Dividends | |||||||||||||||||||||
March 3, 2013 | High | Low | Declared | ||||||||||||||||||||||
March 1, 2015 | High | Low | Declared | ||||||||||||||||||||||
First Quarter | $ | 31.34 | $ | 22.89 | $ | 0.10 | $ | 30.60 | $ | 24.03 | $ | 0.10 | |||||||||||||
Second Quarter | 28.88 | 22.64 | 0.10 | 32.46 | 25.59 | 0.10 | |||||||||||||||||||
Third Quarter | 28.10 | 22.54 | 0.10 | 28.34 | 19.31 | 0.10 | |||||||||||||||||||
Fourth Quarter | 28.54 | 23.41 | 2.60 | (a) | 25.87 | 20.50 | 1.60 | (a) |
For the Fiscal Year Ended | Stock Price | Dividends | ||||||||||
February 26, 2012 | High | Low | Declared | |||||||||
First Quarter | $ | 33.05 | $ | 27.82 | $ | 0.10 | ||||||
Second Quarter | 30.16 | 21.58 | 0.10 | |||||||||
Third Quarter | 30.47 | 19.44 | 0.10 | |||||||||
Fourth Quarter | 32.19 | 25.13 | 0.10 |
For the Fiscal Year Ended | Stock Price | Dividends | |||||||||||
March 2, 2014 | High | Low | Declared | ||||||||||
First Quarter | $ | 26.41 | $ | 22.31 | $ | 0.10 | |||||||
Second Quarter | 28.43 | 23.08 | 0.10 | ||||||||||
Third Quarter | 30.18 | 26.32 | 0.10 | ||||||||||
Fourth Quarter | 30.64 | 24.88 | 2.60 | (b) |
(a) During the 2015 fiscal year fourth quarter, the Company declared its regular quarterly cash dividend of $0.10 per share in December 2014, payable February 2, 2015 to shareholders of record on January 5, 2015, and declared a special cash dividend of $1.50 per share in January 2015, payable February 24, 2015 to shareholders of record on February 10, 2015.
(b) During the 2014 fiscal year fourth quarter, the Company declared its regular quarterly cash dividend of $0.10 per share in December 2013, payable February 3, 2014 to shareholders of record on January 3, 2014, and declared a special cash dividend of $2.50 per share in January 2014, payable February 25, 2014 to shareholders of record on February 11, 2014.
As of May 10, 2013,8, 2015, there were 675618 holders of record of Common Stock.
The Company expects, for the immediate future, to continue to pay regular cash dividends.
The following table provides information with respect to shares of the Company’s Common Stock acquired by the Company during each month included in the Company’s 20132015 fiscal year fourth quarter ended March 3, 2013.1, 2015.
Period | Total Number of Shares (or Units) Purchased | Average Price Paid Per Share (or Unit) | Total Number of Shares (or Units) Purchased As Part of Publicly Announced Plans or Programs | Maximum Number (or Approximate Dollar Value) of Shares (or Units) that May Yet Be Purchased Under the Plans or Programs | ||||||||||||
November 26 - January 3 | 3 | $ | 24.22 | 0 | ||||||||||||
January 4 - February 3 | 0 | - | 0 | |||||||||||||
February 4 - March 3 | 0 | - | 0 | |||||||||||||
Total | 3 | $ | 24.22 | 0 | 996,095 | (a) |
Period | Total Number of Shares (or Units) Purchased | Average Price Paid Per Share (or Unit) | Total Number of Shares (or Units) Purchased As Part of Publicly Announced Plans or Programs | Maximum Number (or Approximate Dollar Value) of Shares (or Units) that May Yet Be Purchased Under the Plans or Programs | |||||||||
December 1 - January 1 | - | $ | - | 0 | |||||||||
January 2 - February 1 | 95,334 | 21.52 | 95,334 | ||||||||||
February 2 - March 1 | 23,422 | 21.78 | 23,422 | ||||||||||
Total | 118,756 | $ | 21.58 | 118,756 | 1,131,244 (a) |
(a) Aggregate number of shares available to be purchased by the Company pursuant to a share purchase authorization announced on January 8, 2015. Pursuant to such authorization, the Company is authorized to purchase its shares from time to time on the open market or in privately negotiated transactions.
In addition to the shares shown in the table above, the Company purchased an aggregate of 444,834 shares during the period March 9, 2015 through April 24, 2015 at an average price paid per share of $21.32, leaving an aggregate total of 686,410 shares available to be purchased by the Company pursuant to the aforementioned share purchase authorization announced on January 8, 2015. All of such 444,834 shares were purchased by the Company pursuant to a Rule 10b5-1 Stock Purchase Plan established by the Company on February 13, 2015 and terminated by the Company on April 24, 2015. Additional purchases by the Company pursuant to the aforementioned share purchase authorization may occur from time to time in the future. As previously announced by the Company, shares purchased by the Company will be retained as treasury stock and will be available for use under the Company’s stock option plan and for other corporate purposes.
ITEM 6. SELECTED FINANCIAL DATA.
The following selected consolidated financial data of Park and its subsidiaries is qualified by reference to, and should be read in conjunction with, the Consolidated Financial Statements, related Notes, and Management’s Discussion and Analysis of Financial Condition and Results of Operations contained elsewhere herein. Insofar as such consolidated financial information relates to the five fiscal years ended March 3, 20131, 2015 and is as of the end of such periods, it is derived from the Consolidated Financial Statements for the five fiscal years ended March 3, 20131, 2015 and as of such dates audited by Grant Thornton LLP,the Company’s independent registered public accounting firm.firms. The Consolidated Financial Statements as of March 3, 20131, 2015 and February 26, 2012March 2, 2014, and for each of the three years ended March 1, 2015, March 2, 2014 and March 3, 2013, together with the report of the independent auditor’s reportregistered public accounting firm for the threeyear ended March 1, 2015 and the report of the independent registered public accounting firm for the years ended March 2, 2014 and March 3, 2013, appear in Item 8 of Part II of this Report.
Fiscal Year Ended | ||||||||||||||||||||
(Amounts in thousands, except per share amounts) | ||||||||||||||||||||
March 3, | February 26, | February 27, | February 28, | March 1, | ||||||||||||||||
2013 | 2012 | 2011 | 2010 | 2009 | ||||||||||||||||
STATEMENT OF EARNINGS INFORMATION | ||||||||||||||||||||
Net Sales | $ | 176,416 | $ | 193,254 | $ | 211,652 | $ | 175,686 | $ | 200,062 | ||||||||||
Cost of sales | 125,866 | 138,512 | 141,751 | 124,084 | 156,638 | |||||||||||||||
Gross profit | 50,550 | 54,742 | 69,901 | 51,602 | 43,424 | |||||||||||||||
Selling, general and administative expenses | 26,595 | 28,247 | 27,917 | 24,480 | 24,806 | |||||||||||||||
Asset impairment charge | - | - | - | - | 3,967 | |||||||||||||||
Restructuring charges (Note 9) | 3,703 | 1,250 | 1,312 | - | 2,290 | |||||||||||||||
Earnings from operations | 20,252 | 25,245 | 40,672 | 27,122 | 12,361 | |||||||||||||||
Interest and other income, net | 633 | 808 | 645 | 1,062 | 6,648 | |||||||||||||||
Litigation and insurance settlements (Note 8) | - | 1,598 | - | - | - | |||||||||||||||
Earnings from continuing operations before income taxes | 20,885 | 27,651 | 41,317 | 28,184 | 19,009 | |||||||||||||||
Income tax provision from continuing operations (Note 4) | 3,924 | 4,209 | 8,696 | 2,825 | 495 | |||||||||||||||
Net earnings from continuing operations | 16,961 | 23,442 | 32,621 | 25,359 | 18,514 | |||||||||||||||
Gain from discontinued operations | - | - | - | - | 16,486 | |||||||||||||||
Net earnings | $ | 16,961 | $ | 23,442 | $ | 32,621 | $ | 25,359 | $ | 35,000 | ||||||||||
Basic earnings per share: | ||||||||||||||||||||
Net earnings from continuing operations | $ | 0.82 | $ | 1.13 | $ | 1.58 | $ | 1.24 | $ | 0.90 | ||||||||||
Gain from discontinued operations | - | - | - | - | 0.81 | |||||||||||||||
Basic earnings per share | $ | 0.82 | $ | 1.13 | $ | 1.58 | $ | 1.24 | $ | 1.71 | ||||||||||
Diluted earnings per share: | ||||||||||||||||||||
Net earnings from continuing operations | $ | 0.81 | $ | 1.13 | $ | 1.58 | $ | 1.23 | $ | 0.90 | ||||||||||
Gain from discontinued operations | - | - | - | - | 0.81 | |||||||||||||||
Diluted earnings per share | $ | 0.81 | $ | 1.13 | $ | 1.58 | $ | 1.23 | $ | 1.71 | ||||||||||
Cash dividends per common share | $ | 2.90 | $ | 0.40 | $ | 1.40 | $ | 0.36 | $ | 0.32 | ||||||||||
Weighted average number of common shares outstanding: | ||||||||||||||||||||
Basic | 20,801 | 20,746 | 20,628 | 20,522 | 20,441 | |||||||||||||||
Diluted | 20,823 | 20,792 | 20,675 | 20,547 | 20,486 | |||||||||||||||
BALANCE SHEET INFORMATION | ||||||||||||||||||||
Working capital | $ | 303,996 | $ | 290,149 | $ | 271,706 | $ | 261,036 | $ | 239,645 | ||||||||||
Total assets | 369,658 | 365,988 | 353,808 | 343,104 | 327,579 | |||||||||||||||
Long-term debt | 52,000 | - | - | - | - | |||||||||||||||
Stockholders' equity | 299,922 | 343,211 | 325,308 | 316,098 | 295,709 |
Fiscal Year Ended | ||||||||||||||||||||
(Amounts in thousands, except per share amounts) | ||||||||||||||||||||
March 1, | March 2, | March 3, | February 26, | February 27, | ||||||||||||||||
2015 | 2014 | 2013 | 2012 | 2011 | ||||||||||||||||
STATEMENT OF EARNINGS INFORMATION | ||||||||||||||||||||
Net sales | $ | 162,086 | $ | 165,764 | $ | 176,416 | $ | 193,254 | $ | 211,652 | ||||||||||
Cost of sales | 113,133 | 117,664 | 125,866 | 138,512 | 141,751 | |||||||||||||||
Gross profit | 48,953 | 48,100 | 50,550 | 54,742 | 69,901 | |||||||||||||||
Selling, general andadministative expenses | 24,373 | 25,168 | 26,595 | 28,247 | 27,917 | |||||||||||||||
Restructuring charges | 1,179 | 546 | 3,703 | 1,250 | 1,312 | |||||||||||||||
Earnings from operations | 23,401 | 22,386 | 20,252 | 25,245 | 40,672 | |||||||||||||||
Interest expense | 1,438 | 764 | 14 | - | - | |||||||||||||||
Interest and other income | 827 | 460 | 647 | 808 | 645 | |||||||||||||||
Litigation and insurance settlements | - | - | - | 1,598 | - | |||||||||||||||
Earnings before income taxes | 22,790 | 22,082 | 20,885 | 27,651 | 41,317 | |||||||||||||||
Income tax provision | 2,747 | 64,411 | 3,924 | 4,209 | 8,696 | |||||||||||||||
Net earnings(loss) | $ | 20,043 | $ | (42,329 | ) | $ | 16,961 | $ | 23,442 | $ | 32,621 | |||||||||
Earnings per share: | ||||||||||||||||||||
Basic earnings (loss) per share | $ | 0.96 | $ | (2.03 | ) | $ | 0.82 | $ | 1.13 | $ | 1.58 | |||||||||
Diluted earnings (loss) per share | $ | 0.96 | $ | (2.03 | ) | $ | 0.81 | $ | 1.13 | $ | 1.58 | |||||||||
Cash dividends per common share | $ | 1.90 | $ | 2.90 | $ | 2.90 | $ | 0.40 | $ | 1.40 | ||||||||||
Weighted average number of commonshares outstanding: | ||||||||||||||||||||
Basic | 20,912 | 20,849 | 20,801 | 20,746 | 20,628 | |||||||||||||||
Diluted | 20,986 | 20,849 | 20,823 | 20,792 | 20,675 | |||||||||||||||
BALANCE SHEET INFORMATION | ||||||||||||||||||||
Working capital | $ | 283,535 | $ | 286,997 | $ | 303,996 | $ | 290,149 | $ | 271,706 | ||||||||||
Total assets | 350,682 | 377,093 | 369,658 | 365,988 | 353,808 | |||||||||||||||
Long-term debt | 84,000 | 94,000 | 52,000 | - | - | |||||||||||||||
Shareholders' equity | 181,599 | 200,543 | 299,922 | 343,211 | 325,308 |
See notes to Consolidated Financial Statements in Item 8 of Part II of this Report.
General:ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.
General:
Park Electrochemical Corp. (“Park” or the “Company”) is a global advanced materials company which develops, manufactures, markets and sells high-technology digital and RF/microwave printed circuit materials products principally for the telecommunications and internet infrastructure and high-end computing markets and advanced composite materials, parts and assemblies products and low-volume tooling for the aerospace markets. Park’s core capabilities are in the areas of polymer chemistry formulation and coating technology. The Company’s manufacturing facilities are located in Singapore, France, Kansas, Arizona and California. The Company also maintains research and development facilities in Arizona, Kansas and Singapore.
The Company’s fiscal year is the 52 or 53 week period ending the Sunday nearest to the last day of February. The 2013, 20122015, 2014 and 20112013 fiscal years ended on March 1, 2015, March 2, 2014 and March 3, 2013, February 26, 2012 and February 27, 2011, respectively. The 2013, 20122015, 2014 and 20112013 fiscal years consisted of 53,52, 52 and 5253 weeks, respectively.Unless otherwise indicated in this Discussion and Analysis, all referencereferences to years in this Discussion and Analysis are to the Company’s fiscal years and all annual information in this Discussion and Analysis is for such fiscal yearsyears..
The comparisonscomparison of the Company's results of operations for 20132014 to the Company's results of operations for 20122013 are impacted by the facts that the 2014 fiscal year consisted of 52 weeks and the 2013 fiscal year consisted of 53 weeks and the 2012 fiscal year consisted of 52 weeks.
20152013 Financial Overview
The Company's total net sales worldwide in 20132015 were 9%2% lower than in 20122014 primarily as a result ofdue to lower sales of the Company’s printed circuit materials products in North America and Europe, partially offset by higher sales of the Company’s printed circuit materials products in Asia and Europe. The Company’shigher sales of the Company’s aerospace composite materials, parts and assemblies were also slightly lower in 2013 than in 2012. Theand low-volume tooling.
Despite the decline in total net sales and the fixed nature of printed circuit materials products resulted in lowercertain overhead costs, the Company’s gross profit and lower earnings from operationsincreased in 20132015 compared to 2012. However, the2014. The Company’s gross profit margin, measured as a percentage of sales, improved to 28.7%30.2% in 20132015 from 28.3%29.0% in 2012.
The Company’s earnings from operations and net earnings were lower2014 due primarily to reductions in 2013 than in 2012 primarily as a result of the declinesutility rates, cost reduction initiatives in the Company’s total net salesUnited States, a decrease in 2013 compared to 2012repairs and due to the higher restructuring charges in 2013 related to the closures of the Park Advanced Composite Materials, Inc. (“PACM”) facility located in Waterbury, Connecticutmaintenance expenses and the Nelco Technology (Zhuhai FTZ) Ltd. (“Nelco Zhuhai”) facility located in the Free Trade Zone in Zhuhai, China.
The decline in sales and the restructuring charges in 2013 were partially offset by a small improvement in the Company’s gross profit margin, which resulted from the improved operating performance of the Company’s Park Aerospace Technologies Corp. (“PATC”) business unit in Newton, KansasKansas. The gross profit in 2013 and the cost reductions resulting from the closures of the Company’s PACM and Nelco Zhuhai facilities in 2013. The decline in sales and the restructuring charges in 2013 were2015 also partially offset by the benefitsbenefited from the higher percentagespercentage of sales of higher margin, high performance printed circuit materials products in 2013 than in 2014 and the 2012, by lowergrowing percentage of sales of the Company’s more technically advanced high performance products.
The Company’s earnings from operations in 2015 were 5% higher than in 2014 primarily as a result of the favorable impact of the items mentioned in the preceding paragraph and the reduction in selling, general and administrative expenses partially offset by an increase in 2013 than in 2012 and by the lower income tax expense in 2013 than in 2012. The Company’s net earnings
in 2013 were adversely affected by the lower interest and other income realized by the Company in 2013 than in 2012.
Litigation and insurance settlements in 2012 consisted of the Company’s recognition of pre-tax other income of $1.6 million in 2012 resulting from the settlement of a lawsuit for an insurance claim for business interruption at the Company’s Neltec, Inc. business unit in Tempe, Arizona in 2003 caused by the explosion and resulting destruction of a treater at the Company’s business unit in Singapore and the settlement of a lawsuit pertaining to defective equipment purchased by the Company’s PATC business unit in Newton, Kansas.restructuring charges.
The Company’s operating andnet earnings performances in both 2013 and 20122015 were adversely affected by additional, andhigher than in some instances duplicative, costs associated with transferring aerospace composite materials manufacturing from2014 primarily as a result of a non-cash charge of $64.0 million recorded in the 2014 fourth quarter for the accrual of U.S. deferred income taxes on the undistributed earnings of the Company’s PACM facilitysubsidiary in Waterbury, ConnecticutSingapore. The charge was partially offset by a tax benefit of $2.2 million recorded in the 2014 second quarter in connection with a tax refund related to the Company’s PATC facility in Newton, Kansas. Such costs were eliminated in third quarter of 2013 by the closure of the PACM facility.amended federal income tax returns.
The global markets for the Company’s printed circuit materials products continue to be very difficult to forecast, and it is not clear to the Company what the condition of the global marketsdemand for the Company’s printed circuit materials products will be in 20142016 or beyond. Further,However, the Company is not able to predictcurrently in the impact the current global economic and financial conditions will have on the markets forprocess of qualifying its aerospace composite materials, parts and assemblies products for use in 2014 or beyond.certain aerospace manufacturing programs and expects sales of these products to continue to increase in the future.
In the second quarter of 2013, the Company’s Nelco Zhuhai facility, located in the Free Trade Zone in Zhuhai, China, ceased its operations. In connection with the closure of such facility, the Company recorded approximately $2.7 million of such charges in 2013 and expects to record no significant additional charges in connection with such closure. The manufacturing activities conducted by Nelco Zhuhai are now conducted by Nelco Products Pte. Ltd. in Singapore, and the cessation of operations of Nelco Zhuhai has not resulted in the loss of any business by the Company. The Company is supplying and fully supporting all of its customers in Asia from its Nelco Products Pte. Ltd. business unit in Singapore.Resultsof Operations:
In the third quarter of 2012, the Company completed a major expansion of its PATC aerospace composite materials development and manufacturing facility in Kansas in order Fiscal Year2015 Comparedto manufacture aerospace composite parts and assemblies in the same facility as advanced composite materials, which are used in the manufacture of such parts and assemblies. The expansion consisted of approximately 37,000 square feet of manufacturing and storage space, and the Company spent approximately $5 million on the facility expansion and equipment. Fiscal Year2014
Fiscal Year Ended | ||||||||||||||||
March 1, | March 2, | |||||||||||||||
(amounts in thousands, except per share amounts) | 2015 | 2014 | Increase / (Decrease) | |||||||||||||
Net sales | $ | 162,086 | $ | 165,764 | $ | (3,678 | ) | -2 | % | |||||||
Cost of sales | 113,133 | 117,664 | (4,531 | ) | -4 | % | ||||||||||
Gross profit | 48,953 | 48,100 | 853 | 2 | % | |||||||||||
Selling, general and administrative expenses | 24,373 | 25,168 | (795 | ) | -3 | % | ||||||||||
Restructuring charges | 1,179 | 546 | 633 | 116 | % | |||||||||||
Earnings from operations | 23,401 | 22,386 | 1,015 | 5 | % | |||||||||||
Interest expense | 1,438 | 764 | 674 | 88 | % | |||||||||||
Interest and other income | 827 | 460 | 367 | 80 | % | |||||||||||
Earnings before income taxes | 22,790 | 22,082 | 708 | 3 | % | |||||||||||
Income tax provision | 2,747 | 64,411 | (61,664 | ) | -96 | % | ||||||||||
Net earnings(loss) | $ | 20,043 | $ | (42,329 | ) | $ | 62,372 | 147 | % | |||||||
Earnings per share: | ||||||||||||||||
Basic earnings (loss) per share | $ | 0.96 | $ | (2.03 | ) | $ | 2.99 | 147 | % | |||||||
Diluted earnings (loss) per share | $ | 0.96 | $ | (2.03 | ) | $ | 2.99 | 147 | % |
Following the expansion of PATC, the Company transferred the aerospace composite parts and assemblies manufacturing activities of its Park Aerospace Structures Corp. (“PASC”) facility in Lynnwood, Washington to its PATC facility and closed PASC in the fourth quarter of 2012, and the Company transferred PACM’s aerospace composite materials manufacturing activities to the Company’s PATC facility and closed PACM in the third quarter of 2013. The activities of PASC which were transferred to PATC included the assets and business of Nova Composites, Inc., which PASC acquired in April 2008.
The transfer of aerospace composite materials manufacturing activities from the Company’s PACM facility to its PATC facility and the transfer of aerospace composite parts and assemblies manufacturing activities from the Company’s PASC facility to its PATC facility consolidated all of the Company’s North American aerospace composite materials, parts and assemblies manufacturing activities, as well as all of its design and development activities for composite parts and assemblies at the PATC facility. The completion of the consolidation of the Company’s aerospace composite materials, parts and assemblies manufacturing activities
eliminated the additional, and in some cases duplicative, costs which the Company had incurred in connection with the start-up of PATC and the transfer of such manufacturing activities from PACM and PASC to PATC.
As the result of the closure of PACM, the Company recorded pre-tax charges of $1.3 million in 2012 and pre-tax charges of $0.8 million in 2013 in connection with such closure. The Company does not expect to record significant additional charges in connection with such closure, and the PACM business operations will have no further impact on the consolidated financial condition or results of operations of the Company.
Results of Operations:
Fiscal Year 2013 Compared with Fiscal Year 2012
Fiscal Year Ended | ||||||||||||||||
March 3, | February 26, | |||||||||||||||
(amounts in thousands, except per share amounts) | 2013 | 2012 | Increase / (Decrease) | |||||||||||||
Net sales | $ | 176,416 | $ | 193,254 | $ | (16,838 | ) | -9 | % | |||||||
Cost of sales | 125,866 | 138,512 | (12,646 | ) | -9 | % | ||||||||||
Gross profit | 50,550 | 54,742 | (4,192 | ) | -8 | % | ||||||||||
Selling, general and administrative expenses | 26,595 | 28,247 | (1,652 | ) | -6 | % | ||||||||||
Restructuring charges | 3,703 | 1,250 | 2,453 | 196 | % | |||||||||||
Earnings from operations | 20,252 | 25,245 | (4,993 | ) | -20 | % | ||||||||||
Interest and other income, net | 633 | 808 | (175 | ) | -22 | % | ||||||||||
Litigation and insurance settlements | - | 1,598 | (1,598 | ) | -100 | % | ||||||||||
Earnings before income taxes | 20,885 | 27,651 | (6,766 | ) | -24 | % | ||||||||||
Income tax provision | 3,924 | 4,209 | (285 | ) | -7 | % | ||||||||||
Net earnings | $ | 16,961 | $ | 23,442 | $ | (6,481 | ) | -28 | % | |||||||
Earnings per share: | ||||||||||||||||
Basic earnings per share | $ | 0.82 | $ | 1.13 | $ | (0.31 | ) | -27 | % | |||||||
Diluted earnings per share | $ | 0.81 | $ | 1.13 | $ | (0.32 | ) | -28 | % |
Net Sales
The Company’s total net sales worldwide in 20132015 decreased 9%2% from 20122014 as a result of lower unit volumes of printed circuit materials products shipped to the Company’s customers in North America Asia and Europe. The lower salesEurope, which were partially offset by higher unit volumes of printed circuit materials products soldshipped to the Company’s customers in Asia and higher volumes of aerospace composite materials, parts and assemblies. The decrease in sales of the Company’s printed circuit materials products in North America was primarily driven by a general slowdown in demand for certain legacy products, and the Companyincrease in 2013 was accompanied by slightly lower sales of the Company’s printed circuit materials products in Asia was primarily driven by an increase in demand for the Company’s products as a result of the telecommunications infrastructure build-out in developing countries. The higher sales of the Company’s aerospace composite materials, parts and assemblies products bywas primarily due to the Company’s operations in North America, Asia and Europe.qualification of its aerospace composite materials on a long-term jet engine manufacturing program. The Company’s total net sales of its printed circuit materials products were $150.5$126.4 million in 20132015 and $166.8$135.4 million in 20122014 and comprised 85%78% and 86%82% of the Company’s total net sales worldwide in 20132015 and 2012, respectively.The2014, respectively. The Company’s total net sales of its aerospace composite materials, parts and assemblies and low-volume tooling products were $25.9$35.6 million in 20132015 and $26.5$30.4 million in 20122014 and comprised 15%22% and 14%18% of the Company’s total net sales worldwide in 20132015 and 2012,2014, respectively.
The Company's foreign sales were $95.4$86.7 million, or 54%53% of the Company's total net sales worldwide, during 2013,2015 compared to $107.3$83.6 million of sales, or 56%50% of total net sales worldwide during 2012.2014. The Company's foreign sales during 2013 declined 11%2015 increased 4% from 20122014 as a result of lowerhigher sales in Asia and Europe.Asia.
The Company’s sales in North America, Asia and Europe were 46%, 45%47% and 9%7%, respectively, of the Company’s total net sales worldwide in 20132015 compared to 44%50%, 43% and 13%7%, respectively, in 2012.2014. The Company’s sales in North America decreased 6%8%, its sales in Asia decreased 5%increased 6% and its sales in Europe decreased 32%9% in 20132015 compared to 2012.2014.
During 2013, 82%2015, 92% of the Company’s total net sales worldwide of printed circuit materials consisted of high performance printed circuit materials, compared to 79% for 2012.88% during 2014.
The Company’s high performance printed circuit materials (non-FR4 printed circuit materials) include high-speed, low-loss materials for digital and RF/radio frequency (“RF”)/microwave applications requiring lead-free compatibility and high bandwidth signal integrity, bismalimide triazine (“BT”) materials, polyimides for applications that demand extremely high thermal performance and reliability, cyanate esters, quartz reinforced materials, and polytetrafluoroethylene (“PTFE”) and modified epoxy materials for RF/microwave systems that operate at frequencies up to 77GHz.at least 79GHz.
Gross Profit
Despite the reduction in the Company’s total net sales and the fixed nature of certain overhead costs, the Company’s gross profit in 2015 was 2% higher than its gross profit in the prior fiscal year and the overall gross profit as a percentage of net sales increased to 30.2% in 2015 compared to 29.0% in 2014. The increase in the gross profit margin was primarily due to reductions in utility rates, cost reduction initiatives in the United States, a decrease in repairs and maintenance expenses and the improved operating performance of the Company’s PATC business unit as a result of the increase in sales and efficiencies from larger production volumes. The gross profit in 2015 also benefited from the higher percentage of sales of higher margin, high performance printed circuit materials products than in 2014 and the growing percentage of sales of the more technically advanced high performance products.
Selling, General and Administrative Expenses
Selling, general and administrative expenses decreased by $0.8 million, or 3%, during 2015 compared to 2014. Such expenses measured as percentages of sales were 15.0% during 2015 compared to 15.2% during 2014. The decrease in such expenses in 2015 was primarily the result of lower freight expenses commensurate with lower sales in 2015 than in 2014, and lower travel and entertainment costs, legal fees and stock option expenses, which were partially offset by unfavorable changes in foreign exchange rates.
During 2015 and 2014, the Company recorded non-cash charges of $0.2 million and $0.7 million, respectively, resulting from the modification of previously issued employee stock options resulting from the $1.50 per share special cash dividend paid by the Company in February 2015 and the $2.50 per share special cash dividend paid by the Company in February 2014. Selling, general and administrative expenses in 2015 included $1.4 million of stock option expenses compared to $1.7 million of such expenses in 2014.
Restructuring Charges
During 2015, the Company recorded pre-tax restructuring charges of $1.2 million in connection with cost reduction initiatives in the United States and the closures in prior years of its facilities located in Zhuhai, China and Newburgh, New York, compared to pre-tax restructuring charges of $0.5 million in 2014 related to the closure of the facility in Zhuhai, China.
Earnings from Operations
For the reasons set forth above, the Company’s earnings from operations were $23.4 million for 2015, including the non-cash pre-tax charges of $0.2 million associated with the modification of previously issued employee stock options, pre-tax restructuring charges of $1.2 million related to cost reduction initiatives in the United States and the closures in prior years of facilities in Zhuhai, China and Newburgh, New York and a pre-tax charge of $0.3 million for additional fees incurred in connection with the 2014 fiscal year-end audit, compared to $22.4 million for 2014, including the non-cash pre-tax charges of $0.7 million associated with the modification of previously issued employee stock options, $0.5 million related to the closure of the facility in Zhuhai, China and $0.3 million for a financial advisory services retention fee.
InterestExpense
Interest expense in 2015 related to the Company’s outstanding borrowings under the four-year amended and restated revolving credit facility agreement that the Company entered into with PNC Bank, National Association in the fourth quarter of the 2014. The increase in interest expense of $0.7 million in 2015 was due to the increase in outstanding borrowings in 2015 compared to 2014. The amended and restated agreement provides for an interest rate on the outstanding loan balance of LIBOR plus 1.10%. Other interest rate options are available to the Company under the agreement. See “Liquidity and Capital Resources” and “Results of Operation - Fiscal Year 2014 Compared to Fiscal Year 2013 – Interest Expense” elsewhere in this Item 7 and Note 11 of the Notes to Consolidated Financial Statements included elsewhere in this Report for additional information.
Interestand Other Income
Interest and other income was $0.8 million and $0.5 million for 2015 and 2014, respectively. Interest income increased 80% in 2015 as a result of higher weighted average interest rates based on a larger average balances of marketable securities held by the Company in 2015 compared to last year's comparable period. During 2015 and 2014, the Company earned interest income principally from its investments, which were primarily in short-term instruments and money market funds.
Income Tax Provision
The Company’s effective income tax rate of 12.1% for 2015 was lower than the statutory U.S. Federal income tax rate because portions of the Company's taxable income in 2015 were derived in foreign jurisdictions with lower effective income tax rates. The Company’s effective income tax rate was 291.7% for 2014, which was adversely affected by a non-cash charge of $64.0 million for the accrual of U.S. deferred income taxes on the undistributed earnings of the Company’s subsidiary in Singapore. The aforementioned charge was partially offset by a tax benefit of $2.2 million recorded by the Company in the 2014 second quarter in connection with a tax refund related to amended federal income tax returns. The effect of the aforementioned items was to increase the Company’s income tax provision from $2.6 million to $64.4 million for 2014. See “Results of Operations – Fiscal Year 2014 Compared to Fiscal Year 2013 – Income Tax Provision” elsewhere in this Item 7.
Net Earnings
The Company’s net earnings for 2015 were $20.0 million, including the pre-tax charges of $1.6 million related to a modification of previously issued employee stock options, cost reduction initiatives in the United States and the facility closures and additional 2014 fiscal year-end audit fees mentioned above, compared to a net loss of $42.3 million for 2014, including $64.0 million related to the U.S. income tax on the undistributed earnings of the Company’s subsidiary in Singapore, a tax benefit of $2.2 million in connection with a tax refund related to amended federal income tax returns and pre-tax charges of $1.5 million related to the modification of previously issued employee stock options, the closure of the Company’s facility in Zhuhai, China and the financial advisory services fee mentioned above. The net impact of the items described above was to reduce net earnings by $1.0 million in 2015 and to reduce net earnings by $62.5 million in 2014.
Basic and Diluted Earnings Per Share
Basic and diluted earnings per share for 2015 were $0.96, including the additional non-cash charges related to the modification of previously issued employee stock options, cost reduction initiatives in the United States and the facility closures and the additional 2014 fiscal year-end audit fees mentioned above, compared to a basic and diluted loss per share of $2.03, including the non-cash charge for the accrual of U.S. income tax on undistributed earnings, the tax benefit in connection with the tax refund related to amended federal income tax returns, the additional non-cash charges resulting from the modification of previously issued employee stock options, the pre-tax charges in connection with the closure of the Zhuhai facility and the financial advisory services retention fee mentioned above. The net impact of the items described above was to reduce basic and diluted earnings per share by $0.04 and $3.00 in 2015 and 2014, respectively.
Fiscal Year2014 Comparedto Fiscal Year2013
The comparison of the Company’s results of operations for 2014 to the Company’s results of operations for 2013 are impacted by the fact that the 2013 fiscal year consisted of 53 weeks and the 2014 fiscal year consisted of 52 weeks.
Fiscal Year Ended | ||||||||||||||||
March 2, | March 3, | |||||||||||||||
(amounts in thousands, except per share amounts) | 2014 | 2013 | Increase / (Decrease) | |||||||||||||
Net sales | $ | 165,764 | $ | 176,416 | $ | (10,652 | ) | -6 | % | |||||||
Cost of sales | 117,664 | 125,866 | (8,202 | ) | -7 | % | ||||||||||
Gross profit | 48,100 | 50,550 | (2,450 | ) | -5 | % | ||||||||||
Selling, general and administrative expenses | 25,168 | 26,595 | (1,427 | ) | -5 | % | ||||||||||
Restructuring charges | 546 | 3,703 | (3,157 | ) | -85 | % | ||||||||||
Earnings from operations | 22,386 | 20,252 | 2,134 | 11 | % | |||||||||||
Interest expense | 764 | 14 | 750 | 5357 | % | |||||||||||
Interest and other income | 460 | 647 | (187 | ) | -29 | % | ||||||||||
Earnings before income taxes | 22,082 | 20,885 | 1,197 | 6 | % | |||||||||||
Income tax provision | 64,411 | 3,924 | 60,487 | 1541 | % | |||||||||||
Net (loss) earnings | $ | (42,329 | ) | $ | 16,961 | $ | (59,290 | ) | -350 | % | ||||||
Earnings per share: | ||||||||||||||||
Basic (loss) earnings per share | $ | (2.03 | ) | $ | 0.82 | $ | (2.85 | ) | -348 | % | ||||||
Diluted (loss) earnings per share | $ | (2.03 | ) | $ | 0.81 | $ | (2.84 | ) | -351 | % |
Net Sales
The Company’s total net sales worldwide in 2014 decreased 6% from 2013 as a result of lower unit volumes of printed circuit materials products shipped to the Company’s customers in North America, Asia and Europe. The lower sales of printed circuit materials products sold by the Company in 2014 was partially offset by higher sales of aerospace composite materials, parts and assemblies products by the Company’s operations in North America, Asia and Europe. The Company’s total net sales of its printed circuit materials products were $135.4 million in 2014 and $150.6 million in 2013 and comprised 82% and 85% of the Company’s total net sales worldwide in 2014 and 2013, respectively. The Company’s total net sales of its aerospace composite materials, parts and assemblies products were $30.4 million in 2014 and $25.9 million in 2013 and comprised 18% and 15% of the Company’s total net sales worldwide in 2014 and 2013, respectively.
The Company's foreign sales were $83.6 million, or 50% of the Company's total net sales worldwide, during 2014 compared to $95.4 million of sales, or 54% of total net sales worldwide during 2013. The Company's foreign sales during 2014 declined 12% from 2013 as a result of lower sales in Asia and Europe.
The Company’s sales in North America, Asia and Europe were 50%, 43% and 7%, respectively, of the Company’s total net sales worldwide in 2014 compared to 46%, 45% and 9%, respectively, in 2013. The Company’s sales in North America increased 2%, its sales in Asia decreased 9% and its sales in Europe decreased 31% in 2014 compared to 2013.
During 2014, 88% of the Company’s total net sales worldwide of printed circuit materials consisted of high performance printed circuit materials, compared to 82% for 2013.
Cost of Sales
The Company’s cost of sales decreased by 9%7% in 20132014 from 20122013 primarily as a result of lower sales and lower production volumes in 20132014 than in 2012,2013, and cost of sales as a percentage of sales decreased to 71.0% in 2014 from 71.3% in 2013. The decrease in costs of sales as a percentage of sales was due primarily to the improved operating performance of the Company’s PATC business unit, the elimination of the additional, and in some instances duplicative, costs associated with transferring aerospace composite materials manufacturing from the Company’s PACMPark Advanced Composite Materials, Inc. (“PACM”) facility to the Company’s PATC facility in 2013, the cost reductions resulting from the closures of the Company’s PACM facility and Nelco Zhuhai facility in 2013 and lower depreciation expense in 20132014 than in 2012 and lower rental expense at one of the Company’s business units in 2013 than in 2012. The Company’s cost of sales as a percentage of net sales decreased to 71.3% in 2013 from 71.7% in 20122013.
Gross Profit
The Company’s gross profit in 20132014 was lower than its gross profit in the prior fiscal year, but the overall gross profit as a percentage of net sales for the Company’s worldwide operations increased to 29.0% in 2014 compared to 28.7% in 2013 compared to 28.3% in 2012 despite significantly lower sales and the partially fixed nature of overhead costs. The gross profit margin in 20132014 benefitted from the higher percentage of sales of higher margin, high performance printed circuit materials products in 20132014 than in 2012,2013, cost reductions as a result of the aforementioned facility closures, the improved operating performance of the Company’s PATC business unit and the lower depreciation expense in 20132014 than in 2012 and the lower rental expense in 2013 than in 2012.2013.
Selling, General and Administrative Expenses
Selling, general and administrative expenses decreased by $1.7$1.4 million, or 6%5%, during 20132014 compared to 2012.2013. Such expenses measured as percentages of sales were 15.2% during 2014 compared to 15.1% during 2013 compared to 14.6% during 2012.2013. The increase as a percentage of sales iswas the result of lower revenues combined with the partially fixed nature of such expenses. Such expenses in 2013 and 2012 were impacted by additional, and in some instances duplicative, expenses associated with the consolidation of all of the Company’s North American aerospace composite materials, parts and assemblies manufacturing, development and design activities at its PATC business unit. The decrease in such expenses in 20132014 was primarily the result of lower legal fees and expenses, lower selling and freight expenses commensurate with lower sales than in 2012. Although such expenses
declined in 2013, they were inflated by increases in legal fees and expenses in 2013 compared to 2012. Selling, general and administrative expenses in 2013 included $0.9 million of stock option expenses compared to $0.8 million in 2012.
Restructuring Charges
During 2013, the Company recorded charges of $3.7 million primarily for the closures of its PACM facility in Waterbury, Connecticut and its Nelco Zhuhai facility in the Free Trade Zone in Zhuhai, China; and in the fourth quarter of 2012, the Company recorded a charge of $1.3 million in connection with the closure of the PACM facility.
Earnings from Operations
For reasons set forth above, the Company’s earnings from operations were $20.3 million for 2013, including the $3.7 million charge primarily for the closures of PACM and Nelco Zhuhai, compared to $25.2 million for 2012, including the $1.3 million charge related to the closure of PACM. The Company’s earnings from operations in the first half of 2013 and in 2012 were reduced by losses incurred at the Company’s PATC business unit.
Interest and Other Income, Net
Interest and other income, net was $0.6 million in 2013 compared to $0.8 million in 2012. During 2013 and 2012, the Company earned interest income principally from its investments, which were primarily in short-term instruments and money market funds. The Company incurred no interest expense during 2012 and incurred $14,000 of interest expense in the fourth quarter of 2013 under a five-year revolving credit agreement entered into with PNC Bank, National Association in such quarter. See "Liquidity and Capital Resources" elsewhere in this Item 7 for additional information.
Litigation and Insurance Settlements
During the second quarter of 2012, the Company recognized other income of $1.6 million resulting from the aforementioned settlements of a lawsuit for a business interruption insurance claim and a lawsuit pertaining to defective equipment.
Income Tax Provision
The Company's effective income tax rate was 18.8% for 2013 compared to 15.2% for 2012. The higher effective income tax rate for 2013 was attributable principally to a change in the earnings mix between United States and foreign operations subject to different income tax rates, the expiration, on June 30, 2011, of Nelco Products Pte. Ltd.’s qualification and favorable tax rates under the development and expansion tax incentive in Singapore and the charge related to the closure of Nelco Zhuhai with no associated tax benefit.
Net Earnings
The Company’s net earnings for 2013 were $17.0 million, including the $3.7 million pre-tax charges related primarily to the closures of PACM and Nelco Zhuhai described above, compared to net earnings for 2012 of $23.4 million, including the $1.3 million pre-tax charge related to the closure of PACM and the $1.6 million pre-tax other income resulting from the settlements of the lawsuits described above. The net impact of the charges described above related primarily to the closures of PACM and Nelco Zhuhai was to reduce net earnings by $3.4 million in 2013. The net impact of the charge described above in 2012 related to the closure of PACM was to reduce net earnings by $0.8 million in 2012, and the impact of the other income,
net of tax, resulting from the settlements of the lawsuits described above was to increase net earnings by $1.1 million in 2012.
Basic and Diluted Earnings Per Share
Basic and diluted earnings per share for 2013 were $0.82 and $0.81, respectively, including the charges related to the closures of PACM and Nelco Zhuhai as described above, compared to basic and diluted earnings per share of $1.13 for 2012, including the charge related to the closure of PACM described above and the other income resulting from the settlements of the lawsuits described above. The net impact of the charges related primarily to the closures of PACM and Nelco Zhuhai was to reduce basic and diluted earnings per share by $0.16 and $0.17, respectively, in 2013. The net impact of the charge described above was to reduce basic and diluted earnings per share by $0.04 in 2012, and the impact of the other income, net of tax, resulting from the settlements of the lawsuits described above was to increase basic and diluted earnings per share by $0.05 in 2012.
Fiscal Year 2012 Compared with Fiscal Year 2011
Fiscal Year Ended | ||||||||||||||||
February 26, | February 27, | |||||||||||||||
(amounts in thousands, except per share amounts) | 2012 | 2011 | Increase / (Decrease) | |||||||||||||
Net sales | $ | 193,254 | $ | 211,652 | $ | (18,398 | ) | -8.7 | % | |||||||
Cost of sales | 138,512 | 141,751 | (3,239 | ) | -2.3 | % | ||||||||||
Gross profit | 54,742 | 69,901 | (15,159 | ) | -21.7 | % | ||||||||||
Selling, general and administrative expenses | 28,247 | 27,917 | 330 | 1.2 | % | |||||||||||
Restructuring charges | 1,250 | 1,312 | (62 | ) | -4.7 | % | ||||||||||
Earnings from operations | 25,245 | 40,672 | (15,427 | ) | -37.9 | % | ||||||||||
Interest and other income, net | 808 | 645 | 163 | 25.3 | % | |||||||||||
Litigation and insurance settlements | 1,598 | - | 1,598 | 100.0 | % | |||||||||||
Earnings before income taxes | 27,651 | 41,317 | (13,666 | ) | -33.1 | % | ||||||||||
Income tax provision | 4,209 | 8,696 | (4,487 | ) | -51.6 | % | ||||||||||
Net earnings | $ | 23,442 | $ | 32,621 | $ | (9,179 | ) | -28.1 | % | |||||||
Earnings per share: | ||||||||||||||||
Basic earnings per share | $ | 1.13 | $ | 1.58 | $ | (0.45 | ) | -28.5 | % | |||||||
Diluted earnings per share | $ | 1.13 | $ | 1.58 | $ | (0.45 | ) | -28.5 | % |
Net Sales
The Company’s total net sales worldwide in 2012 decreased 9% to $193.3 million from $211.7 million for 2011. The decrease in total net sales was the result of lower unit volumes of printed circuit materials products shipped to the Company’s customers in North America and Asia. Such decrease was partially offset by higher sales of such products to the Company’s customers in Europe and higher sales of aerospace composite materials, parts and assemblies by the Company’s operations in North America, Asia and Europe. The Company’s total net sales of its printed circuit materials products were $150.5 million2014 than in 2013 and $166.8 million in 2012 and comprised 85% and 86%the elimination of the Company’s total net sales worldwide in 2013 and 2012, respectively. The Company’s total net sales of its aerospace composite materials, parts and assemblies products increased to $26.5 million in 2012 from $23.3 million in 2011 and comprised 14% and 11%, respectively, of the Company’s total net sales worldwide in 2012 and 2011.
The Company's foreign sales were $107.3 million, or 55% of the Company's total net sales worldwide, during 2012 compared to $112.8 million of sales, or 53% of total net sales worldwide, during 2011 and 50% and 48%, respectively, of total net sales worldwide during 2010 and 2009. The Company's foreign sales during 2012 declined 5% from 2011 primarily as a result of decreases in sales in Asia.
The Company’s sales in North America, Asia and Europe were 44%, 43% and 13%, respectively, of the Company’s total net sales worldwide in 2012 compared to 47%, 43% and 10%, respectively, in 2011. The Company’s sales in North America decreased 13%, its sales in Asia decreased 9% and its sales in Europe increased 11% in 2012 compared to 2011.
During 2012, 79% of the Company’s total net sales worldwide of printed circuit materials consisted of high performance printed circuit materials, compared to 74% for 2011.
Cost of Sales
The Company’s cost of sales decreased by 2% in 2012 from 2011 as a result of lower sales and lower production volumes in 2012 than in 2011, but the Company’s cost of sales as a percentage of net sales increased to 71.7% in 2012 from 67.0% in 2011 resulting in a gross profit margin decline from 33.0% to 28.3%. The Company’s cost of sales in 2012 was inflated by increased utility costs and additional, and in some instances duplicative, costs associated with the consolidation of all of the Company’s North American aerospace composite materials, parts and assemblies manufacturing, development and design activities at its PATC business unit.
Gross Profit
The Company’s gross profit in 2012 was lower than its gross profit in the prior fiscal year, and the overall gross profit as a percentage of net sales for the Company’s worldwide operations declined to 28.3% in 2012 compared to 33.0% in 2011. The decrease in the gross profit margin was attributable to the lower total net sales in 2012 and the higher cost of sales relative to total sales in such year than in the prior year. Such factors were only partially offset by the higher percentage of sales of higher margin, high performance printed circuit materials products in 2012 than in 2011.
Selling, General and Administrative Expenses
Selling, general and administrative expenses increased by $0.3 million, or by 1%, during 2012 compared to 2011, and these expenses, measured as percentages of sales, were 14.6% during 2012 compared to 13.2% during 2011. Such expenses in 2012 were impacted by additional, and in some instances duplicative, expenses associated with operating two facilities during the consolidation of all of the Company’s North American aerospace composite materials, parts and assemblies manufacturing, development and design activities at its PATC business unit in the 2013 fiscal year. Although such expenses declined in 2014, they were partially offset by increases in stock option expenses in 2014 compared to 2013 due to additional non-cash charges resulting from the modification of previously issued employee stock options resulting from the special cash dividend paid by the Company in February 2014 and a donation to The Japanese Red Cross Society in 2012.financial advisory services retention fee. Selling, general and administrative expenses in 2014 included $0.8$1.7 million in 2012 forof stock option expenses compared to $1.0$0.9 million in 2011.2013.
Restructuring Charges
Restructuring Charges
In the fourth quarter of 2012, theThe Company recorded a chargepre-tax restructuring charges of $1.3$0.5 million during 2014 in connection with the closure of its Nelco Zhuhai facility located in the Free Trade Zone in Zhuhai, China in the 2013 fiscal year second quarter, and the Company recorded pre-tax restructuring charges of $3.7 million in 2013 in connection with the closure of the Nelco Zhuhai facility and the closure of the PACM facility in Waterbury, Connecticut. InConnecticut in the 2013 fiscal year third quarter of 2011, the Company recorded a charge of $1.3 million related to the closure, in January of 2009, of the operations of Neltec Europe SAS, the Company’s printed circuit materials business unit in Mirebeau, France.quarter.
Earnings Fromfrom Operations
For the reasons set forth above, the Company’s earnings from operations were $22.4 million for 2012 were $25.2 million,2014, including the $1.3non-cash pre-tax charges of $0.7 million chargeassociated with the modification of previously issued employee stock options, $0.3 million for the financial advisory services retention fee and $0.5 million related to the closure of PACM,the Nelco Zhuhai facility described above, compared to earnings from operations$20.3 million for 2011 of $40.7 million,2013, including the $1.3pre-tax restructuring charges of $3.7 million charge related to the closureclosures of Neltec Europe SAS in January of 2009. The Company’s earnings from operations in both 2012the Nelco Zhuhai facility and 2011 were reduced by losses incurred at the Company’s PATC business unit.
Interest and Other Income, Net
Interest and other income, net increased 25% to $0.8 million for 2012 from $0.6 million for 2011. During 2012 and 2011, the Company earned interest income principally from its investments, which were primarily in short-term instruments and money market funds. The Company incurred no interest expense during 2012 or 2011. See "Liquidity and Capital Resources" elsewhere in this Item 7.
Litigation and Insurance Settlements
During the second quarter of 2012, the Company recognized other income of $1.6 million resulting from the aforementioned settlements of a lawsuit for a business interruption insurance claim and a lawsuit pertaining to defective equipment.
Income Tax Provision
The Company's effective income tax rate was 15.2% for 2012 compared to 21.0% for 2011. The lower effective income tax rate for 2012 than for 2011 was primarily the result of lower portions of taxable income in jurisdictions with higher income tax rates. There was no tax benefit associated with the $1.3 million charge related to the 2009 closure of Neltec Europe SASPACM facility described above.
Net EarningsInterest Expense
The Company’s net earnings for 2012 were $23.4 million, including the $1.3 million pre-tax chargeinterest expense in 2014 related to the closure of PACMCompany’s borrowings under the four-year amended and the $1.6 million pre-tax other income resulting from the settlements of the lawsuits described above, compared to net earnings for 2011 of $32.6 million, including the $1.3 million pre-tax charge related to the closure of Neltec Europe SAS in January of 2009 described above. The net impact of the charge described above in 2012 was to reduce net earnings by $0.8 million in 2012, and the impact of the other income, net of tax, resulting from the settlements of the lawsuits described above was to increase net earnings by $1.1 million in 2012. The net impact of the charge described above in 2011 was to reduce net earnings by $1.3 million for 2011.
Basic and Diluted Earnings Per Share
Basic and diluted earnings per share for 2012 were $1.13 per share, including the charge related to the closure of PACM described above and the other income resulting from the settlements of the lawsuits described above, compared to basic and diluted earnings per share of $1.58 for 2011, including the charge related to the 2009 closure of Neltec Europe SAS described above. The net impact of the charge described above was to reduce basic and diluted earnings per share by $0.04 in 2012, and the impact of the other income, net of tax, resulting from the settlements of the lawsuits described above was to increase basic and diluted earnings per share by $0.05 in 2012. The net impact of the charge described above was to reduce basic earnings per share by $0.07 and to reduce diluted earnings per share by $0.06 for 2011.
Liquidity and Capital Resources:
(amounts in thousands) | March 3, | February 26, | Increase / | |||||||||
2013 | 2012 | (Decrease) | ||||||||||
Cash and marketable securities | $ | 275,216 | $ | 268,785 | $ | 6,431 | ||||||
Working capital | 303,996 | 290,149 | 13,847 |
Fiscal Year Ended | ||||||||||||||||||||
(amounts in thousands) | March 3, | February 26, | February 27, | Increase / (Decrease) | ||||||||||||||||
2013 | 2012 | 2011 | 2013 vs. 2012 | 2012 vs. 2011 | ||||||||||||||||
Net cash provided by operating activities | $ | 19,334 | $ | 31,434 | $ | 42,668 | $ | (12,100 | ) | $ | (11,234 | ) | ||||||||
Net cash provided by (used in) investing activities | 44,947 | (7,569 | ) | (39,763 | ) | $ | 52,516 | $ | 32,194 | |||||||||||
Net cash used in financing activities | (7,778 | ) | (6,395 | ) | (24,737 | ) | $ | (1,383 | ) | $ | 18,342 |
Cash and Marketable Securities
Of the $275.2 million of cash and marketable securities at March 3, 2013, approximately $219.0 million was owned by certain of the Company’s wholly owned foreign subsidiaries. If such foreign owned cash were needed to fund the Company’s operations in the United States,restated revolving credit facility agreement that the Company would be required to accrue and pay Federal and State income taxes in the United States on the amount of such cash that was repatriated to the United States. However, it is the Company’s practice and current intent to indefinitely reinvest such cash owned by its foreign subsidiaries in the operations of its foreign subsidiaries or in other foreign activities, including acquisitions outside the United States. The Company has sufficient liquidity in the United States to fund its activities for the foreseeable future.
The change in cash and marketable securities at March 3, 2013 compared to February 26, 2012 was the result of cash provided by operating activities and a number of additional factors, including the following:
In addition, as described below, the Company paid $60.4 million in cash dividends during the 2013 fiscal year, including a special cash dividend of $52 million paidentered into with PNC Bank, National Association in the fourth quarter of 2013.
Working Capital
2014. The increase in working capital at March 3, 2013 compared to February 26, 2012 was due principally to the increases in cashamended and marketable securities, accounts receivable and other current assets and the decreases in accounts payable and accrued liabilities, partially offset by the decrease in inventories.
The Company's current ratio (the ratio of current assets to current liabilities) was 19.2 to 1 at March 3, 2013 compared with 14.5 to 1 at February 26, 2012.
Cash Flows
During 2013, net earnings from the Company’s operations, before depreciation and amortization, stock-based compensation, provision for doubtful accounts, provision for deferred income taxes, amortization of bond premium, impairment of fixed assets and non-cash restructuring charges, of $25.4 million, reduced by a net increase in working capital items (as discussed above), resulted in $19.3 million of cash provided by operating activities.
During 2013, the Company expended a net amount of $1.4 million for the purchase of property, plant and equipment, primarily for the purchase of equipment for the Company’s printed circuit materials manufacturing facility in Singapore and for the Company’s aerospace development and manufacturing facility in Newton, Kansas and expended $2.2 million as additional payment for the acquisition of substantially all the assets and business of Nova Composites, Inc. Such expenditures compare to a net amount of $4.0 million during 2012 for the purchase of property, plant and equipment, primarily for the installation of an additional advanced, high-speed treater at the facility in Singapore and the purchase of equipment for the facility in Kansas and $1.1 million as additional payment for the acquisition of substantially all the assets and business of Nova Composites, Inc.
In addition, the Company paid $60.4 million in cash dividends on its common stock in 2013, including a special cash dividend of $2.50 per share, totaling $52 million, paid in the fourth quarter of 2013, compared to $8.3 million in 2012.
In the first quarter of 2009, the Company’s wholly owned subsidiary, Park Aerospace Structures Corp., acquired substantially all the assets and business of Nova Composites, Inc., a manufacturer of aircraft composite parts and assemblies and the tooling for such parts and assemblies, located in Lynnwood, Washington, for a cash purchase price of $4.5 million paid at the closing of the acquisition and up to an additional $5.5 million payable over five years depending on the achievement of specified earn-out objectives. The Company paid $3.2 million of such additional $5.5 million over the past three fiscal years but disputed the purchase price, including the earn-out payments, in the first quarter of 2013. The Company resolved such dispute and paid an additional $2.2 million in the fourth quarter of 2013. The Company expects to pay no additional amounts in connection with such acquisition.
During 2010, the Company expended approximately $1.1 million for equipment for its aerospace composite materials development and manufacturing facility in Newton, Kansas and approximately $1.1 million for the construction of an expansion of such facility to produce aerospace composite parts and assemblies. During 2011, the Company expended approximately $0.3 million for equipment for such facility, approximately $1.3 million for the construction of such expansion and approximately $0.6 million for equipment for such expanded facility. During 2012, the Company expended approximately $1.5 million for equipment for such facility; and during 2013, the Company expended approximately $0.4 million for equipment for such facility.
Long-Term Debt
At March 3, 2013 the Company had $52 million of long-term debt, and at February 26, 2012, the Company had no long-term debt. In the fourth quarter of 2013, the Company entered into a five-year revolving credit facility agreement with PNC Bank, National Association. The credit facilityrestated agreement provides for loans of up to $52$104 million to the Company and letters of credit up to $2 million for the account of the Company and, subject to the terms and conditions of the agreement, an interest rate on the outstanding loan balance of LIBOR plus 1.15%1.10%. Other interest rate options are available to the Company under the credit agreement. At the end of 2013,2014, the Company borrowed $52$104 million under this credit facility and used all of such borrowed funds to finance the payment of a special cash dividend of $2.50 per share, totaling $52 million, paid to its shareholders on February 25, 2014 and to continue the $52 million loan that was provided under the credit facility agreement that the Company entered into with PNC Bank in January 2013 to finance the payment of a special cash dividend of $2.50 per share, totaling $52 million, paid to the Company’s shareholders on February 26, 2013. The credit facility agreement entered into in 2014 replaced the credit facility agreement entered into in 2013. See “Liquidity and Capital Resources” elsewhere in this Item 7 and Note 11 of the Notes to Consolidated Financial Statements included elsewhere in this Report for additional information.
Interest Income
Interest income decreased $187,000, or 29%, during 2014 compared to 2013 primarily as a result of lower prevailing interest rates and shorter average maturities of the Company’s investments during 2014 than 2013. During 2014 and 2013, the Company incurred $14,000earned interest income principally from its investments, which were primarily in short-term instruments and money market funds.
Income Tax Provision
The Company's effective income tax rate was 291.7% for 2014 compared to 18.8% for 2013. The effective income tax rate for 2014 was adversely affected by a non-cash charge of interest expense$64.0 million for the accrual of U.S. deferred income taxes on the undistributed earnings of the Company’s subsidiary in Singapore. The charge included $34.4 million related to the U.S. income tax that would be payable if the Company were to repatriate funds in an after-tax amount necessary to repay the Company’s existing $104.0 million principal amount bank loan from PNC Bank and $29.6 million relating to the remainder of the undistributed earnings of the Company’s subsidiary in Singapore. The Company has no current plan to repatriate the undistributed earnings of its subsidiary in Singapore. The aforementioned charge was partially offset by a tax benefit of $2.2 million recorded by the Company in the 2014 second quarter in connection with a tax refund related to amended federal income tax returns. The effect of the aforementioned items was to increase the Company’s income tax provision from $2.6 million to $64.4 million for 2014.
Net Earnings
The Company’s net loss for 2014 was $42.3 million, including the $64.0 million non-cash charge for the accrual of U.S. income tax on undistributed earnings, the tax benefit of $2.2 million in connection with the tax refund related to amended federal income tax returns, the $0.7 million non-cash pre-tax charges associated with the modification of previously issued employee stock options and the pre-tax charges of $0.5 million in connection with the closure of the Nelco Zhuhai facility and $0.3 million financial advisory services retention fee described above, compared to net earnings for 2013 of $17.0 million, including the $3.7 million pre-tax charges related primarily to the closures of PACM and Nelco Zhuhai, described above. The net impact of the items described above was to reduce net earnings by $62.5 million in 2014 and to reduce net earnings by $3.4 million in 2013.
Basic and Diluted Earnings Per Share
Basic and diluted losses per share for 2014 were $2.03, including the non-cash charge for the accrual of U.S. income tax on undistributed earnings, the tax benefit in connection with the tax refund related to amended federal income tax returns, the additional non-cash charges related to the modification of previously issued employee stock options, the pre-tax charges in connection with the closure of the Nelco Zhuhai facility and the financial advisory services retention fee described above, compared to basic and diluted earnings per share of $0.82 and $0.81, respectively for 2013, including the charges related to the closures of PACM and Nelco Zhuhai described above. The net impact of the items described above was to reduce basic and diluted earnings per share by $3.00 in 2014 and to reduce basic and diluted earnings per share by $0.16 and $0.17, respectively, in 2013.
Liquidity and Capital Resources:
(amounts in thousands) | March 1 | March 2 | Increase / | |||||||||
2015 | 2014 | (Decrease) | ||||||||||
Cash and marketable securities | $ | 272,133 | $ | 270,356 | $ | 1,777 | ||||||
Restricted cash | - | 25,000 | (25,000 | ) | ||||||||
Working capital | 283,535 | 286,997 | (3,462 | ) |
Fiscal Year Ended | ||||||||||||||||||||||
(amounts in thousands) | March 1, | March 2, | March 3, | Increase / (Decrease) | ||||||||||||||||||
2015 | 2014 | 2013 | 2015 vs. 2014 | 2014 vs. 2013 | ||||||||||||||||||
Net cash provided by operatingactivities | $ | 29,011 | $ | 30,382 | $ | 19,334 | $ | (1,371 | ) | $ | 11,048 | |||||||||||
Net cash provided by (used in)investing activities | 5,481 | (50,675 | ) | 44,947 | $ | 56,156 | $ | (95,622 | ) | |||||||||||||
Net cash used in financingactivities | (25,948 | ) | (32,536 | ) | (7,774 | ) | $ | 6,588 | $ | (24,762 | ) |
Cash,Marketable Securities and Restricted Cash
Of the $272.1 million of cash and marketable securities at March 1, 2015, approximately $269.0 million was owned by certain of the Company’s wholly owned foreign subsidiaries. In the fourth quarter of 2014, the Company provided a non-cash charge for the accrual of U.S. deferred income taxes in the amount of $64.0 million on undistributed earnings of the Company’s subsidiary in Singapore. The Company believes it has sufficient liquidity to fund its operating activities through the end of 2016 and for the foreseeable future thereafter.
The change in cash, marketable securities and restricted cash at March 1, 2015 compared to March 2, 2014 was the result of cash provided by operating activities and a number of additional factors. The significant changes in cash provided by operating activities were as follows:
● | prepaid expenses and other current assets were 27% higher at March 1, 2015 than at March 2, 2014 principally due to an increase in current deferred tax assets, partially offset by the receipt of payment on an income tax recoverable during 2015; | |
● | accounts payable increased 13% at March 1, 2015 compared to March 2, 2014 primarily due to the timing of payments to vendors and raw material purchases from suppliers; | |
● | income taxes payable increased 38% at March 1, 2015 compared to March 2, 2014 primarily as a result of an increase in the Singapore income tax provision in 2015; and | |
● | other liabilities increased 558% at March 1, 2015 than at March 2, 2014 primarily as a result of an increase in the Company’s tax reserves. |
In addition, the Company paid $39.6 million and $60.5 million in cash dividends during 2015 and 2014, respectively, including special cash dividends of $31.4 million and $52.2 million paid in the fourth quarter of 2015 and the fourth quarter of 2014, respectively, and the Company made a $10.0 million principal payment on its long-term debt and purchased treasury shares at an aggregate cost of $2.7 million in the fourth quarter of 2015.
Working Capital
The decrease in working capital at March 1, 2015 compared to March 2, 2014 was due principally to the decreases in accounts receivable and increases in current deferred income taxes, income taxes payable and accounts payable, partially offset by increases in cash and marketable securities, inventories and prepaid expenses and other current assets and a decrease in accrued liabilities.
The Company's current ratio (the ratio of current assets to current liabilities) was 10.5 to 1 at March 1, 2015 compared with 12.8 to 1 at March 2, 2014.
Cash Flows
During 2015, earnings from the Company’s operations, before depreciation and amortization, stock-based compensation, provision for deferred income taxes and amortization of bond premium, of $23.1 million, increased by a net addition in working capital items (as discussed above), resulted in $29.0 million of cash provided by operating activities.
During 2015, the Company expended $0.4 million for the purchase of property, plant and equipment. Such expenditures compare to $1.1 million during 2014 and $1.4 million during 2013 under suchfor the purchase of property, plant and equipment, primarily for the purchase of equipment for the Company’s printed circuit materials manufacturing facility in Singapore and for the Company’s aerospace development and manufacturing facility in Kansas. During 2013, the Company also paid $2.2 million as additional payment for the acquisition of substantially all the assets and business of Nova Composites, Inc.
In addition, the Company paid $39.6 million, $60.5 million and $60.4 million in cash dividends during 2015, 2014 and 2013, respectively, including special cash dividends of $31.4 million ($1.50 per share), $52.2 million ($2.50 per share) and $52.1 million ($2.50 per share) paid in the fourth quarter of 2015, the fourth quarter of 2014 and the fourth quarter of 2013, respectively. In addition, the Company made a $10.0 million principal payment on its long-term debt and purchased treasury shares at an aggregate cost of $2.7 million during 2015.
Long-Term Debt
At March 1, 2015 and March 2, 2014, the Company had $94.0 million and $104.0 million of bank debt, respectively. In the fourth quarter of 2014, the Company entered into a four-year amended and restated revolving credit agreement. Seefacility agreement (the “Amended Credit Agreement”) with PNC Bank, National Association. The Amended Credit Agreement provides for loans up to $104.0 million to the Company and letters of credit up to $2.0 million for the account of the Company, and subject to the terms and conditions of the Amended Credit Agreement, an interest rate on the outstanding loan balance of LIBOR plus 1.10%. For additional information, see Note 11 of the Notes to Consolidated Financial Statements included elsewhere in this Report.
Other Liquidity Factors
The Company believes its financial resources will be sufficient, through the end of 2016 and for the foreseeable future thereafter, to provide for continued investment in working capital and property, plant and equipment and for general corporate purposes. Such resources would also be available for purchases of the Company's common stock, appropriate acquisitions and other expansions of the Company's business.
The Company is not aware of any circumstances or events that are reasonably likely to occur that could materially affect its liquidity.
Contractual Obligations:Obligations:
The Company's contractual obligations and other commercial commitments to make future payments under contracts, such as lease agreements, consist only of (i) operating lease commitments, commitments to purchase raw materials and commitments to purchase equipment, as described in Note 12 of the Notes to Consolidated Financial Statements included elsewhere in this Report, and (ii) the long-term debt described above. The Company has no other long-term debt, capital lease obligations, unconditional purchase obligations or other long-term obligations, standby letters of credit, guarantees, standby repurchase obligations or other commercial commitments or contingent commitments, other than two standby letters of credit in the total amount of $1.2$1.1 million to secure the Company's obligations under its workers’ compensation insurance program.
As of March 3, 2013,1, 2015, the Company’s significant contractual obligations, including payments due by fiscal year, were as follows:
Contractual Obligations (Amounts in thousands) | Total | 2014 | 2015-2016 | 2017-2018 | 2019 and thereafter | Total | 2016 | 2017-2018 | 2019-2020 | 2021 and thereafter | ||||||||||||||||||||||||||||||
Operating lease obligations | $ | 9,622 | $ | 1,903 | $ | 2,859 | $ | 563 | $ | 4,297 | $ | 10,079 | $ | 1,910 | $ | 2,425 | $ | 2,341 | $ | 3,403 | ||||||||||||||||||||
Long-term debt | 52,000 | - | - | 52,000 | - | |||||||||||||||||||||||||||||||||||
Bank debt | 94,000 | 10,000 | 84,000 | - | - | |||||||||||||||||||||||||||||||||||
Inventory purchase obligations | 1,379 | 1,379 | - | - | - | 118 | 118 | - | - | - | ||||||||||||||||||||||||||||||
Equipment purchase obligations | 456 | 456 | - | - | - | |||||||||||||||||||||||||||||||||||
Total | $ | 63,457 | $ | 3,738 | $ | 2,859 | $ | 52,563 | $ | 4,297 | $ | 104,197 | $ | 12,028 | $ | 86,425 | $ | 2,341 | $ | 3,403 |
At March 3, 2013,1, 2015, the Company had gross tax-effected unrecognized tax benefits of $3.1$1.1 million. A reasonable estimate of the timing of the payment of these liabilities is not possible.
Off-Balance Sheet Arrangements:Arrangements:
The Company's liquidity is not dependent on the use of, and the Company is not engaged in, any off-balance sheet financing arrangements, such as securitization of receivables or obtaining access to assets through special purpose entities.
Environmental Matters:Matters:
The Company is subject to various Federal, state and local government and foreign government requirements relating to the protection of the environment. The Company believes that, as a general matter, its policies, practices and procedures are properly designed to prevent unreasonable risk of environmental damage and that its handling, manufacture, use and disposal of hazardous or toxic substances are in accord with environmental laws and regulations. However, mainly because of past operations and operations of predecessor companies, which were generally in compliance with applicable laws at the time of the operations in question, the Company, like other companies engaged in similar businesses, is a party to claims by government agencies and third parties and has incurred remedial response and voluntary cleanup costs associated with environmental matters. Additional claims and costs involving past environmental matters may continue to arise in the future. It is the Company's policy to record appropriate liabilities for such matters when remedial efforts are probable and the costs can be reasonably estimated.
In 2013, 20122015, 2014 and 2011,2013, the Company charged approximately $56,000, $127,000$44,000, $27,000 and $7,000,$70,000, respectively, against pre-tax income for remedial response and voluntary cleanup costs and related legal fees. The Company received, or expects to receive, reimbursement pursuant to general liability insurance coverage for approximately $14,000$21,000, $15,000 and $15,000, respectively, of such amounts charged in 20132015, 2014 and 2012.2013. While annual environmental remedial response and voluntary cleanup expenditures, including legal fees, have generally been constant from year to year, and may increase over time, the Company expects it will be able to fund such expenditures from cash flow from operations. The timing of expenditures depends on a number of factors, including regulatory approval of cleanup projects, remedial techniques to be utilized and agreements with other parties. At March 3, 20131, 2015 and February 26, 2012,March 2, 2014, there were no amounts recorded in accrued liabilities for environmental matters.
Management does not expect that environmental matters will have a material adverse effect on the liquidity, capital resources, business, consolidated results of operations or consolidated financial position of the Company. See Note 13 of the Notes to Consolidated Financial Statements included in Item 8 of Part II of this Report for a discussion of the Company's contingencies, including those related to environmental matters.
Critical Accounting Policies and Estimates:Estimates:
The following information is provided regarding critical accounting policies that are important to the Consolidated Financial Statements and that entail, to a significant extent, the use of estimates, assumptions and the application of management's judgment.
General
The Company's discussion and analysis of its financial condition and results of operations are based upon the Company's Consolidated Financial Statements, which have
been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these Financial Statements requires the Company to make estimates, assumptions and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and the related disclosure of contingent liabilities. On an ongoing basis, the Company evaluates its estimates, including those related to sales allowances, allowances for doubtful accounts, inventories, valuation of long-lived assets, income taxes, restructurings, contingencies and litigation, and employee benefit programs. The Company bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
The Company believes the following critical accounting policies affect its more significant judgments and estimates used in the preparation of its Consolidated Financial Statements.
Revenue Recognition
The Company recognizes revenues when products are shipped and title has been transferred to a customer, the sales price is fixed and determinable, and collection is reasonably assured. All material sales transactions are for the shipment of manufactured printed circuit materials products and advanced composite materials, parts and assemblies.the Company’s products.
Sales Allowances and Product Warranties
The Company provides for the estimated costs of sales allowances at the time such costs can be reasonably estimated. The Company’s products are made to customer specifications and tested for adherence to such specifications before shipment to customers. Composite parts and assemblies may be subject to “airworthiness” acceptance by customers after receipt at the customers’ locations. There are no future performance requirements other than the products’ meeting the agreed specifications. The Company’s bases for providing sales allowances for returns are known situations in which products may have failed due to manufacturing defects in the products supplied by the Company. The Company is focused on manufacturing the highest quality printed circuit materials and advanced composite materials, parts and assemblies possible and employs stringent manufacturing process controls and works with raw material suppliers who have dedicated themselves to complying with the Company’s specifications and technical requirements. The amounts of returns and allowances resulting from defective or damaged products have been approximately 1.0% of sales for each of the Company’s last three fiscal years.
Allowances for Doubtful Accounts Receivable
The Company’s accounts receivable are due from purchasers of the Company’s products. Credit is extended based on evaluation of a customer’s financial condition and, generally, collateral is not required. Accounts receivable are due within established payment terms and are stated at amounts due from customers net of an allowance for doubtful accounts. Accounts outstanding longer than established payment terms are considered past due. The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. The Company determines its allowance by considering a number of factors, including the length of time accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the conditionconditions of the general economy and the industry as a whole.electronics and aerospace industries. If the financial condition of the Company'sCompany’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company writes off accounts receivable when they become uncollectible.
Inventories
Inventories are stated at the lower of cost (first-in, first-out method) or market. The Company writes down its inventory for estimated obsolescence or unmarketability based upon the age of the inventory and assumptions about future demand for the Company's products and market conditions.
Valuation of Long-Lived Assets
The Company assesses the impairment of long-lived assets whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. In addition, the Company assesses the impairment of goodwill at least annually. Important factors that could trigger an impairment review include, but are not limited to, significant negative industry or economic trends and significant changes in the use of the Company’s assets or strategy of the overall business.
Income Taxes
As part of the processes of preparing its consolidated financial statements, the Company is required to estimate the income taxes in each of the jurisdictions in which it operates. This process involves estimating the actual current tax expense together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included in the Company’s Consolidated Balance Sheets. The carrying valueDeferred income taxes are provided for temporary differences in the reporting of certain items, such as depreciation and undistributed earnings of foreign subsidiaries, for income tax purposes compared to financial accounting purposes. In evaluating the Company's netCompany’s ability to recover the deferred tax assets assumes thatwithin the Company will be able to generate sufficientjurisdiction from which they arise, all positive and negative evidence is considered, including the scheduled reversal of deferred tax liabilities, projected future taxable income, in certain tax jurisdictions, based on estimatesplanning strategies and assumptions.results of recent acquisitions. If these estimates and assumptions change in the future, the Company may be required to record additional valuation allowances against its deferred tax assets, resulting in additional income tax expense in the Company's Consolidated Statements of Operations, or conversely to further reduce the existing valuation allowance, resulting in less income tax expense. The Company evaluates the realizability of the deferred tax assets quarterly and assesses the need for additional valuation allowances quarterly.
Tax benefits are recognized for an uncertain tax position when, in the Company’s judgment, it is more likely than not that the position will be sustained upon examination by a taxing authority. For a tax position that meets the more-likely-than-not recognition threshold, the tax benefit is measured as the largest amount that is judged to have a greater than 50% likelihood of being realized upon ultimate settlement with a taxing authority. The liability associated with unrecognized tax benefits is adjusted periodically due to changing circumstances and when new information becomes available. Such adjustments are recognized entirely in the period in which they are identified. The effective tax rate includes the net impact of changes in the liability for unrecognized tax benefits and subsequent adjustments as considered appropriate by the Company. While it is often difficult to predict the final outcome or the timing of resolution of any particular tax matter, the Company believes its liability for unrecognized tax benefits is adequate. Interest and penalties recognized on the liability for unrecognized tax benefits are recorded as income tax expense.
Restructurings
In the second quarter of 2013, the Company’s Nelco Zhuhai facility, located in the Free Trade Zone in Zhuhai, China, ceased its operations. In connection with the closure of such facility, the Company recorded approximately $2.7 million of such charges in 2013 and expects to record no significant additional charges in connection with such closure.
In the fourth quarter of 2012, the Company announced that its PACM facility, located in Waterbury, Connecticut, would be closing its operations after the completion of the transfer of its aerospace composite materials manufacturing activities to the Company’s PATC facility located at the Newton, Kansas Airport. Such transfer and closure were completed in the third quarter of 2013. As the result of the closure of PACM, the Company recorded pre-tax restructuring charges of $1.3 million in 2012 and $0.8 million in 2013. The Company does not expect to record significant additional charges in connection with such closure.
The Company also recorded a pre-tax charge of $0.2 million in 2013 and a pre-tax charge of $1.3 million in 2011 related to the closure, in January of 2009, of the operations of Neltec Europe SAS, the Company’s electronic materials business unit located in Mirebeau, France. The Company previously recorded a pre-tax charge of $4.1 million in connection with such closure in the fourth quarter of 2009. The additional charge in 2011 was based on updated estimates of the total costs to complete the closure of the Neltec Europe SAS business unit as a result of additional information regarding such costs, including recent developments relating to certain employment litigation initiated in France after the closure and other expenses in excess of the original estimates. The closure of Neltec Europe SAS in January of 2009 was a major component of restructurings of the operations of the Company’s Neltec Europe SAS and Neltec SA business units in 2009. Such restructurings and workforce reductions are described in Note 9 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report and elsewhere in this Discussion.
Contingencies and Litigation
The Company is subject to a number of proceedings, lawsuits and other claims related to environmental, employment, product and other matters. The Company is required to assess the likelihood of any adverse judgments or outcomes in these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is made after careful analysis of each individual issue. The required reserves may change in the future due to new developments in each matter or changes in approach, such as a change in settlement strategy in dealing with these matters.
Employee Benefit Programs
The Company's obligations for workers' compensation claims are effectively self-insured, although the Company maintains individual and aggregate stop-loss insurance coverage for such claims. The Company accrues its workers compensation liability based on estimates of the total exposure of known claims using historical experience and projected loss development factors less amounts previously paid out.
The Company and certain of its subsidiaries have a non-contributory profit sharing retirement plan covering their regular full-time employees. In addition, the Company's subsidiaries have various bonus and incentive compensation programs, most of which are determined at management's discretion.
The Company's reserves associated with these self-insured liabilities and benefit programs are reviewed by management for adequacy at the end of each reporting period.
FACTORS THAT MAY AFFECT FUTURE RESULTS.RESULTS.
The Private Securities Litigation Reform Act of 1995 provides a "safe harbor" for forward-looking statements to encourage companies to provide prospective information about their companies without fear of litigation so long as those statements are identified as forward-looking and are accompanied by meaningful cautionary statements identifying important factors
that could cause actual results to differ materially from those projected in the statement. Certain portions of this Report which do not relate to historical financial information may be deemed to constitute forward-looking statements that are subject to various factors which could cause actual results to differ materially from Park's expectations or from results which might be projected, forecasted, estimated or budgeted by the Company in forward-looking statements.
Generally, forward-looking statements can be identified by the use of words such as “expect,” “estimate,” “project,” “budget,” “forecast,” “anticipate,” “goal,” “intend,” “plan,” “may,” “will,” “could,” “should,” “believes,” “predicts,” “potential,” “continue” and similar expressions or the negative or other variations thereof. Such forward-looking statements are based on current expectations that involve a number of uncertainties and risks that may cause actual events or results to differ materially from Park’s expectations.
The factors described under “Risk Factors” in Item 1A of this Report, as well as the following additional factors, could cause the Company's actual results to differ materially from any such results which might be projected, forecasted, estimated or budgeted by the Company in forward-looking statements.
■ | The Company's operating results are affected by a number of factors, including various factors beyond the Company's control. Such factors include economic conditions in the printed circuit materials, advanced composite materials and composite parts and assemblies industries, the timing of customer orders, product prices, process yields, the mix of products sold and maintenance-related shutdowns of facilities. Operating results also can be influenced by development and introduction of new products and the costs associated with the start-up of new facilities. |
■ | The Company, from time to time, is engaged in the expansion of certain of its manufacturing facilities. The anticipated costs of such expansions cannot be determined with precision and may vary materially from those budgeted. In addition, such expansions will increase the Company's fixed costs. The Company's future profitability depends upon its ability to utilize its manufacturing capacity in an effective manner. |
■ | The Company may acquire businesses, product lines or technologies that expand or complement those of the Company. The integration and management of an acquired company or business may strain the Company's management resources and technical, financial and operating systems. In addition, implementation of acquisitions can result in large one-time charges and costs. A given acquisition, if consummated, may materially affect the Company's business, financial condition and results of operations. |
■ | The Company's success is dependent upon its relationships with key suppliers and customers and key management and technical personnel. |
■ | The Company's future success depends in part upon its intellectual property which the Company seeks to protect through a combination of contract provisions, trade secret protections, copyrights and patents. |
■ | The market price of the Company’s securities can be subject to fluctuations in response to quarter to quarter variations in operating results, changes in analyst earnings estimates, market conditions in the printed circuit materials, advanced composite materials and composite parts and assemblies industries, as well as general economic conditions and other factors external to the Company. |
composite materials and composite parts and assemblies industries, as well as general economic conditions and other factors external to the Company.
■ | The Company's operating results could be affected by changes in the Company's accounting policies and practices or changes in the Company's organization, compensation and benefit plans, or changes in the Company's material agreements or understandings with third parties. |
Item 7A. Quantitative and Qualitative Disclosures About Market Risk.
Foreign Exchange Risk - The Company's primary foreign currency exchange exposure relates to the translation of the financial statements of foreign subsidiaries using currencies other than the U.S. dollar as their functional currency.currencies. The Company does not believe that a hypothetical 10% fluctuation in foreign exchange rates would have had a material impact on its consolidated results of operations or financial position.
Interest Rate Risk - The exposure to market risks for changes in interest rates relates to the Company's short-term investment portfolio and its variable rate borrowings under its long-term debt obligations pursuant to the five-yearfour-year amended and restated revolving credit facility agreement (the “Amended Credit Agreement”) with PNC Bank, National Association. See Note 11 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report. The Company does not use derivative financial instruments in its investment portfolio or its long-term debt obligations. The Company’s short-term investment portfolio is managed in accordance with guidelines issued by the Company. These guidelines are designed to establish a high quality fixed income portfolio of government and highly rated corporate debt securities with a maximum weighted maturity of less than one year. Based on the average anticipated maturity of the investment portfolio at the end of the 20132015 fiscal year, the Company does not believe that a hypothetical 10% fluctuation in short-term interest rates would have had a material impact on the consolidated results of operations or financial position of the Company. The Company’s outstanding borrowings of $52$94.0 million, at March 3, 2013,1, 2015, represent 100% of the Company’s total long-term debt obligations. Outstanding borrowings bear interest at a rate equal to, at the Company’s option, either a (a) LIBOR rate option determined by a fluctuating rate per annum equal to the LIBOR Rate plus 1.15%,1.10% or (b) base rate option determined by a fluctuating rate per annum equal to the highest of (i) the Federal Funds Open Rate (as defined in the Amended Credit Agreement) plus 0.5%, (ii) the Prime Rate (as defined in the Amended Credit Agreement), and (iii) the Daily LIBOR Rate (as defined in the Amended Credit Agreement) plus 1.0%. The Company does not believe that a hypothetical 10% fluctuation in interest rates would have had a material impact on the consolidated results of operations or financial position of the Company.
Item 8. Financial Statements and Supplementary Data.
The Company's Financial Statements begin on the next page.
REPORTREPORTS OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRMFIRMS
The Board of Directors and Shareholders
Park Electrochemical Corp.
We have audited the accompanying consolidated balance sheet of Park Electrochemical Corp. and subsidiaries as of March 1, 2015, and the related consolidated statements of operations, comprehensive earnings (loss), shareholders’ equity and cash flows for the year then ended. Our audit also included the financial statement schedule listed in the index at Item 15. Park Electrochemical Corp.’s management is responsible for these consolidated financial statements and financial statement schedule. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Park Electrochemical Corp. and subsidiaries as of March 1, 2015, and the results of their operations and their cash flows for the year then ended, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly in all material respects, the information set forth therein.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Park Electrochemical Corp. and subsidiaries’ internal control over financial reporting as of March 1, 2015, based on criteria established inInternal Control - Integrated Framework (2013)issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated May 15, 2015 expressed an unqualified opinion thereon.
/s/ CohnReznick LLP
Jericho, New York
May 15, 2015
Board of Directors and Shareholders
Park Electrochemical Corp.
We have audited the accompanying consolidatedbalance sheets of Park Electrochemical Corp. (a New York corporation) and subsidiaries (thesubsidiaries(the “Company”) as of March 2, 2014 and March 3, 2013 and February 26, 2012,(not presented herein), and the related consolidated statementsconsolidatedstatements of operations, comprehensive income,earnings (loss), shareholders’ equity, and cash flows for each of the threetwo years in the period ended March 3, 2013.2, 2014. Our audits of the basic consolidated financial statements included the financial statement schedule listed in the index appearing under Item 15(a)(2). These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and financial statement schedule based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financialconsolidatedfinancial statements referred to above present fairly, in all material respects, the financial position of Park Electrochemical Corp. and subsidiaries assubsidiariesas of March 2, 2014 and March 3, 2013 and February 26, 2012,(not presented herein), and the results of their operationstheiroperations and their cashtheircash flows for each of the threetwo years in the period ended March 3, 2013,2, 2014 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of March 3, 2013, based on criteria established inInternal Control - Integrated Frameworkissued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated May 16, 2013 expressed an unqualified opinion thereon.
/s/ GRANT THORNTONGrant Thornton LLP
New York, New York
May 16, 20132014
March 3, 2013 | February 26, 2012 | |||||||
ASSETS | ||||||||
Current assets: | ||||||||
Cash and cash equivalents | $ | 186,117 | $ | 129,503 | ||||
Marketable securities (Note 2) | 89,099 | 139,282 | ||||||
Accounts receivable, less allowance for doubtful accounts of $423 and $598, respectively | 25,878 | 23,533 | ||||||
Inventories (Note 3) | 12,918 | 15,823 | ||||||
Prepaid expenses and other current assets | 6,662 | 3,449 | ||||||
Total current assets | 320,674 | 311,590 | ||||||
Property, plant and equipment, net of accumulated depreciation and amortization (Note 3) | 32,187 | 38,695 | ||||||
Goodwill and other intangible assets (Note 3) | 9,854 | 7,661 | ||||||
Other assets (Note 4) | 6,943 | 8,042 | ||||||
Total Assets | $ | 369,658 | $ | 365,988 | ||||
LIABILITIES AND SHAREHOLDERS' EQUITY | ||||||||
Current liabilities: | ||||||||
Accounts payable | $ | 6,485 | $ | 8,427 | ||||
Accrued liabilities (Note 3) | 6,016 | 8,816 | ||||||
Income taxes payable | 4,177 | 4,198 | ||||||
Total current liabilities | 16,678 | 21,441 | ||||||
Long-term debt (Note 11) | 52,000 | - | ||||||
Deferred income taxes (Note 4) | 812 | 1,062 | ||||||
Other liabilities (Note 4) | 246 | 274 | ||||||
Total liabilities | 69,736 | 22,777 | ||||||
Commitments and contingencies (Notes 12 and 13) | ||||||||
Shareholders' equity (Note 6): | ||||||||
Preferred stock, $1 par value per shares-authorized, 500,000 shares; issued, none | - | - | ||||||
Common stock, $0.10 par value per shares-authorized, 60,000,000 shares; issued, 20,831,578 and 20,795,591 shares, respectively | 2,083 | 2,079 | ||||||
Additional paid in capital | 158,790 | 157,115 | ||||||
Retained earnings | 138,514 | 181,941 | ||||||
Accumulated other comprehensive income | 629 | 2,077 | ||||||
300,016 | 343,212 | |||||||
Less treasury stock, at cost, 4,066 and 158 shares, respectively | (94 | ) | (1 | ) | ||||
Total shareholders' equity | 299,922 | 343,211 | ||||||
Total liabilities and shareholders' equity | $ | 369,658 | $ | 365,988 |
See Notes to Consolidated Financial Statements.
PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONSBALANCE SHEETS
(Amounts in thousands, except share and per share amounts)
Fiscal Year Ended | ||||||||||||
March 3, | February 26, | February 27, | ||||||||||
2013 | 2012 | 2011 | ||||||||||
Net sales | $ | 176,416 | $ | 193,254 | $ | 211,652 | ||||||
Cost of sales | 125,866 | 138,512 | 141,751 | |||||||||
Gross profit | 50,550 | 54,742 | 69,901 | |||||||||
Selling, general and administrative expenses | 26,595 | 28,247 | 27,917 | |||||||||
Restructuring charges (Note 9) | 3,703 | 1,250 | 1,312 | |||||||||
Earnings from operations | 20,252 | 25,245 | 40,672 | |||||||||
Interest and other income, net | 633 | 808 | 645 | |||||||||
Litigation and insurance settlements (Note 8) | - | 1,598 | - | |||||||||
Earnings before income taxes | 20,885 | 27,651 | 41,317 | |||||||||
Income tax provision (Note 4) | 3,924 | 4,209 | 8,696 | |||||||||
Net earnings | $ | 16,961 | $ | 23,442 | $ | 32,621 | ||||||
Earnings per share (Note 7): | ||||||||||||
Basic earnings per share | $ | 0.82 | $ | 1.13 | $ | 1.58 | ||||||
Basic weighted average shares | 20,801 | 20,746 | 20,628 | |||||||||
Diluted earnings per share | $ | 0.81 | $ | 1.13 | $ | 1.58 | ||||||
Diluted weighted average shares | 20,823 | 20,792 | 20,675 |
March 1, 2015 | March 2, 2014 | |||||||
ASSETS | ||||||||
Current assets: | ||||||||
Cash and cash equivalents | $ | 141,538 | $ | 133,150 | ||||
Marketable securities (Note 2) | 130,595 | 137,206 | ||||||
Accounts receivable, less allowance for doubtfulaccounts of $396 and $416, respectively | 21,431 | 22,881 | ||||||
Inventories (Note 3) | 14,439 | 13,871 | ||||||
Prepaid expenses and other current assets | 5,256 | 4,132 | ||||||
Total current assets | 313,259 | 311,240 | ||||||
Property, plant and equipment, net | 26,537 | 29,674 | ||||||
Goodwill and other intangible assets (Note 3) | 9,840 | 9,847 | ||||||
Restricted cash | - | 25,000 | ||||||
Other assets (Note 4) | 1,046 | 1,332 | ||||||
Total assets | $ | 350,682 | $ | 377,093 | ||||
LIABILITIES AND SHAREHOLDERS' EQUITY | ||||||||
Current liabilities: | ||||||||
Current portion of long-term debt (Note 11) | $ | 10,000 | $ | 10,000 | ||||
Accounts payable | 6,882 | 6,109 | ||||||
Accrued liabilities (Note 3) | 4,767 | 5,139 | ||||||
Income taxes payable | 4,141 | 2,995 | ||||||
Current deferred income taxes | 3,934 | - | ||||||
Total current liabilities | 29,724 | 24,243 | ||||||
Long-term debt (Note 11) | 84,000 | 94,000 | ||||||
Deferred income taxes (Note 4) | 54,155 | 58,124 | ||||||
Other liabilities (Note 4) | 1,204 | 183 | ||||||
Total liabilities | 169,083 | 176,550 | ||||||
Commitments and contingencies (Notes 12 and 13) | ||||||||
Shareholders' equity (Note 6): | ||||||||
Preferred stock, $1 par value pershares-authorized, 500,000 shares;issued, none | - | - | ||||||
Common stock, $0.10 par value pershares-authorized, 60,000,000 shares;issued, 20,962,644 and 20,882,844 shares,respectively | 2,096 | 2,088 | ||||||
Additional paid in capital | 164,819 | 161,677 | ||||||
Retained earnings | 16,048 | 35,651 | ||||||
Accumulated other comprehensive earnings | 1,468 | 1,221 | ||||||
184,431 | 200,637 | |||||||
Less treasury stock, at cost, 130,641 and 4,074 shares,respectively | (2,832 | ) | (94 | ) | ||||
Total shareholders' equity | 181,599 | 200,543 | ||||||
Total liabilities and shareholders' equity | $ | 350,682 | $ | 377,093 |
See Notes to Consolidated Financial Statements.
PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
(Amounts in thousands, except per share amounts)
Fiscal Year Ended | ||||||||||||
March 3, | February 26, | February 27, | ||||||||||
2013 | 2012 | 2011 | ||||||||||
Net earnings | $ | 16,961 | $ | 23,442 | $ | 32,621 | ||||||
Other comprehensive income, net of tax: | ||||||||||||
Exchange rate changes | 75 | 70 | 377 | |||||||||
Less: reclassification adjustment for gains included in net income | (1,465 | ) | - | - | ||||||||
Unrealized gains on marketable securities: | ||||||||||||
Unrealized holding gains arising during the period | 41 | 60 | 56 | |||||||||
Less: reclassification adjustment for gains included in net income | (67 | ) | (44 | ) | (21 | ) | ||||||
Unrealized losses on marketable securities: | ||||||||||||
Unrealized holding losses arising during the period | (72 | ) | (44 | ) | (57 | ) | ||||||
Less: reclassification adjustment for losses included in net income | 40 | 52 | 12 | |||||||||
Other comprehensive income | (1,448 | ) | 94 | 367 | ||||||||
Total comprehensive income | $ | 15,513 | $ | 23,536 | $ | 32,988 |
Fiscal Year Ended | ||||||||||||
March 1, | March 2, | March 3, | ||||||||||
2015 | 2014 | 2013 | ||||||||||
Net sales | $ | 162,086 | $ | 165,764 | $ | 176,416 | ||||||
Cost of sales | 113,133 | 117,664 | 125,866 | |||||||||
Gross profit | 48,953 | 48,100 | 50,550 | |||||||||
Selling, general and administrative expenses | 24,373 | 25,168 | 26,595 | |||||||||
Restructuring charges (Note 9) | 1,179 | 546 | 3,703 | |||||||||
Earnings from operations | 23,401 | 22,386 | 20,252 | |||||||||
Interest expense (Note 11) | 1,438 | 764 | 14 | |||||||||
Interest and other income | 827 | 460 | 647 | |||||||||
Earnings before income taxes | 22,790 | 22,082 | 20,885 | |||||||||
Income tax provision (Note 4) | 2,747 | 64,411 | 3,924 | |||||||||
Net earnings(loss) | $ | 20,043 | $ | (42,329 | ) | $ | 16,961 | |||||
Earnings per share (Note 7): | ||||||||||||
Basic earnings (loss) per share | $ | 0.96 | $ | (2.03 | ) | $ | 0.82 | |||||
Basic weighted average shares | 20,912 | 20,849 | 20,801 | |||||||||
Diluted earnings (loss) per share | $ | 0.96 | $ | (2.03 | ) | $ | 0.81 | |||||
Diluted weighted average shares | 20,986 | 20,849 | 20,823 |
See Notes to Consolidated Financial Statements.
PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OFCOMPREHENSIVE EARNINGS (LOSS)
(Amounts in thousands)
Fiscal Year Ended | ||||||||||||
March 1, | March 2, | March 3, | ||||||||||
2015 | 2014 | 2013 | ||||||||||
Net earnings (loss) | $ | 20,043 | $ | (42,329 | ) | $ | 16,961 | |||||
Other comprehensive earnings, net of tax: | ||||||||||||
Foreign currency translation | 185 | 420 | 75 | |||||||||
Less: reclassification adjustment for foreign currencytranslation gains included in net earnings | - | - | (1,465 | ) | ||||||||
Unrealized gains on marketable securities: | ||||||||||||
Unrealized holding gains arising during the period | 90 | 117 | 41 | |||||||||
Less: reclassification adjustment for gainsincluded in net earnings (loss) | (21 | ) | (20 | ) | (67 | ) | ||||||
Unrealized losses on marketable securities: | ||||||||||||
Unrealized holding losses arising during the period | (20 | ) | (83 | ) | (72 | ) | ||||||
Less: reclassification adjustment for lossesincluded in net earnings (loss) | 13 | 158 | 40 | |||||||||
Other comprehensive earnings (loss) | 247 | 592 | (1,448 | ) | ||||||||
Total comprehensive earnings (loss) | $ | 20,290 | $ | (41,737 | ) | $ | 15,513 |
See Notes to Consolidated Financial Statements.
PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY
(Amounts in thousands, except share and per share amounts)
Accumulated | ||||||||||||||||||||||||||||
Additional | Other | |||||||||||||||||||||||||||
Common Stock | Paid-in | Retained | Comprehensive | Treasury Stock | ||||||||||||||||||||||||
Shares | Amount | Capital | Earnings | Income (Loss) | Shares | Amount | ||||||||||||||||||||||
Balance, February 28, 2010 | 20,540,836 | $ | 2,054 | $ | 149,352 | $ | 163,077 | $ | 1,616 | 146 | $ | (1 | ) | |||||||||||||||
Net earnings | - | - | - | 32,621 | - | - | - | |||||||||||||||||||||
Exchange rate changes | - | - | - | - | 377 | - | - | |||||||||||||||||||||
Unrealized loss on marketable securities, net of tax | - | - | - | - | (10 | ) | - | - | ||||||||||||||||||||
Stock options exercised | 181,343 | 18 | 3,621 | - | - | 12 | - | |||||||||||||||||||||
Stock-based compensation | - | - | 959 | - | - | - | - | |||||||||||||||||||||
Tax benefit on exercise of options | - | - | 527 | - | - | - | - | |||||||||||||||||||||
Cash dividends ($1.40 per share) | - | - | - | (28,903 | ) | - | - | - | ||||||||||||||||||||
Balance, February 27, 2011 | 20,722,179 | 2,072 | 154,459 | 166,795 | 1,983 | 158 | (1 | ) | ||||||||||||||||||||
Net earnings | - | - | - | 23,442 | - | - | - | |||||||||||||||||||||
Exchange rate changes | - | - | - | - | 70 | - | - | |||||||||||||||||||||
Unrealized gain on marketable securities, net of tax | - | - | - | - | 24 | - | - | |||||||||||||||||||||
Stock options exercised | 73,412 | 7 | 1,803 | - | - | - | - | |||||||||||||||||||||
Stock-based compensation | - | - | 762 | - | - | - | - | |||||||||||||||||||||
Tax benefit on exercise of options | - | - | 91 | - | - | - | - | |||||||||||||||||||||
Cash dividends ($0.40 per share) | - | - | - | (8,296 | ) | - | - | - | ||||||||||||||||||||
Balance, February 26, 2012 | 20,795,591 | 2,079 | 157,115 | 181,941 | 2,077 | 158 | (1 | ) | ||||||||||||||||||||
Net earnings | - | - | - | 16,961 | - | - | - | |||||||||||||||||||||
Exchange rate changes | - | - | - | - | (1,390 | ) | - | - | ||||||||||||||||||||
Unrealized loss on marketable securities, net of tax | - | - | - | - | (58 | ) | - | - | ||||||||||||||||||||
Stock options exercised | 35,987 | 4 | 758 | - | - | 3,908 | (93 | ) | ||||||||||||||||||||
Stock-based compensation | - | - | 915 | - | - | - | - | |||||||||||||||||||||
Tax benefit on exercise of options | - | - | 2 | - | - | - | - | |||||||||||||||||||||
Cash dividends ($2.90 per share) | - | - | - | (60,388 | ) | - | - | - | ||||||||||||||||||||
Balance, March 3, 2013 | 20,831,578 | $ | 2,083 | $ | 158,790 | $ | 138,514 | $ | 629 | 4,066 | $ | (94 | ) |
Accumulated | ||||||||||||||||||||||||||||
Additional | Other | |||||||||||||||||||||||||||
Common Stock | Paid-in | Retained | Comprehensive | Treasury Stock | ||||||||||||||||||||||||
Shares | Amount | Capital | Earnings | Earnings | Shares | Amount | ||||||||||||||||||||||
Balance, February 26, 2012 | 20,795,591 | $ | 2,079 | $ | 157,115 | $ | 181,941 | $ | 2,077 | 158 | $ | (1 | ) | |||||||||||||||
Net earnings | - | - | - | 16,961 | - | - | - | |||||||||||||||||||||
Foreign currency translation | - | - | - | - | (1,390 | ) | - | - | ||||||||||||||||||||
Unrealized loss on marketablesecurities, net of tax | - | - | - | - | (58 | ) | - | - | ||||||||||||||||||||
Stock options exercised | 35,987 | 4 | 760 | - | - | - | - | |||||||||||||||||||||
Stock-based compensation | - | - | 915 | - | - | - | - | |||||||||||||||||||||
Repurchase of treasury shares | - | - | - | - | - | 3,908 | (93 | ) | ||||||||||||||||||||
Cash dividends ($2.90 per share) | - | - | - | (60,388 | ) | - | - | - | ||||||||||||||||||||
Balance, March 3, 2013 | 20,831,578 | 2,083 | 158,790 | 138,514 | 629 | 4,066 | (94 | ) | ||||||||||||||||||||
Net loss | - | - | - | (42,329 | ) | - | - | - | ||||||||||||||||||||
Foreign currency translation | - | - | - | - | 420 | - | - | |||||||||||||||||||||
Unrealized gain on marketablesecurities, net of tax | - | - | - | �� | - | 172 | - | - | ||||||||||||||||||||
Stock options exercised | 51,266 | 5 | 1,157 | - | - | - | - | |||||||||||||||||||||
Stock-based compensation | - | - | 1,730 | - | - | - | - | |||||||||||||||||||||
Repurchase of treasury shares | - | - | - | - | - | 8 | - | |||||||||||||||||||||
Cash dividends ($2.90 per share) | - | - | - | (60,534 | ) | - | - | - | ||||||||||||||||||||
Balance, March 2, 2014 | 20,882,844 | 2,088 | 161,677 | 35,651 | 1,221 | 4,074 | (94 | ) | ||||||||||||||||||||
Net earnings | - | - | - | 20,043 | - | - | - | |||||||||||||||||||||
Foreign currency translation | - | - | - | - | 185 | - | - | |||||||||||||||||||||
Unrealized gain on marketablesecurities, net of tax | - | - | - | - | 62 | - | - | |||||||||||||||||||||
Stock options exercised | 79,800 | 8 | 1,724 | - | - | - | - | |||||||||||||||||||||
Stock-based compensation | - | - | 1,418 | - | - | - | - | |||||||||||||||||||||
Repurchase of treasury shares | - | - | - | - | - | 126,567 | (2,738 | ) | ||||||||||||||||||||
Cash dividends ($1.90 per share) | - | - | - | (39,646 | ) | - | - | - | ||||||||||||||||||||
Balance, March 1, 2015 | 20,962,644 | $ | 2,096 | $ | 164,819 | $ | 16,048 | $ | 1,468 | 130,641 | $ | (2,832 | ) |
See Notes to Consolidated Financial Statements.
PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES
Fiscal Year Ended | ||||||||||||
March 3, | February 26, | February 27, | ||||||||||
2013 | 2012 | 2011 | ||||||||||
Cash flows from operating activities: | ||||||||||||
Net earnings | $ | 16,961 | $ | 23,442 | $ | 32,621 | ||||||
Adjustments to reconcile net earnings to net cash provided by operating activities: | ||||||||||||
Depreciation and amortization | 4,269 | 5,891 | 6,746 | |||||||||
Stock-based compensation | 915 | 762 | 959 | |||||||||
(Recovery of) provision for doubtful accounts | (135 | ) | - | 21 | ||||||||
Provision for deferred income taxes | 1,137 | 22 | 567 | |||||||||
Amortization of bond premium | 1,499 | 1,481 | 1,271 | |||||||||
Impairment of fixed assets | 3,620 | 928 | - | |||||||||
Non-cash restructuring | (1,465 | ) | 322 | 1,312 | ||||||||
Changes in operating assets and liabilities: | ||||||||||||
Accounts receivable | (2,255 | ) | 6,260 | 1,859 | ||||||||
Inventories | 2,882 | (2,947 | ) | (907 | ) | |||||||
Prepaid expenses and other current assets | (3,126 | ) | 982 | (2,572 | ) | |||||||
Other assets and liabilities | (310 | ) | (1,642 | ) | (1,620 | ) | ||||||
Accounts payable | (1,929 | ) | (1,485 | ) | (265 | ) | ||||||
Accrued liabilities | (2,708 | ) | (968 | ) | 1,001 | |||||||
Income taxes payable | (21 | ) | (1,614 | ) | 1,675 | |||||||
Net cash provided by operating activities | 19,334 | 31,434 | 42,668 | |||||||||
Cash flows from investing activities: | ||||||||||||
Purchase of property, plant and equipment | (1,447 | ) | (3,994 | ) | (3,699 | ) | ||||||
Proceeds from sales of property, plant and eqipment | - | - | 894 | |||||||||
Purchases of marketable securities | (142,134 | ) | (172,724 | ) | (259,300 | ) | ||||||
Proceeds from sales and maturities of marketable securities | 190,728 | 170,249 | 223,442 | |||||||||
Business acquisition | (2,200 | ) | (1,100 | ) | (1,100 | ) | ||||||
Net cash provided by (used in) investing activities | 44,947 | (7,569 | ) | (39,763 | ) | |||||||
Cash flows from financing activities: | ||||||||||||
Dividends paid | (60,388 | ) | (8,296 | ) | (28,903 | ) | ||||||
Proceeds from exercise of stock options | 758 | 1,810 | 3,639 | |||||||||
Tax benefits from stock-based compensation | (2 | ) | 91 | 527 | ||||||||
Proceeds from long-term debt | 52,000 | - | - | |||||||||
Debt financing costs | (53 | ) | - | - | ||||||||
Purchase of treasury stock | (93 | ) | - | - | ||||||||
Net cash used in financing activities | (7,778 | ) | (6,395 | ) | (24,737 | ) | ||||||
Increase (decrease) in cash and cash equivalents before effect of exchange rate changes | 56,503 | 17,470 | (21,832 | ) | ||||||||
Effect of exchange rate changes on cash and cash equivalents | 111 | (162 | ) | (3 | ) | |||||||
Increase (decrease) in cash and cash equivalents | 56,614 | 17,308 | (21,835 | ) | ||||||||
Cash and cash equivalents, beginning of year | 129,503 | 112,195 | 134,030 | |||||||||
Cash and cash equivalents, end of year | $ | 186,117 | $ | 129,503 | $ | 112,195 |
CONSOLIDATED STATEMENTS OF CASH FLOWS
(Amounts in thousands)
Fiscal Year Ended | ||||||||||||
March 1, | March 2, | March 3, | ||||||||||
2015 | 2014 | 2013 | ||||||||||
Cash flows from operating activities: | ||||||||||||
Net earnings (loss) | $ | 20,043 | $ | (42,329 | ) | $ | 16,961 | |||||
Adjustments to reconcile net earnings (loss) to net cashprovided by operating activities: | ||||||||||||
Depreciation and amortization | 3,559 | 3,757 | 4,269 | |||||||||
Stock-based compensation | 1,418 | 1,730 | 915 | |||||||||
Recovery of doubtful accounts | - | - | (135 | ) | ||||||||
(Benefit) provision for deferred income taxes | (2,815 | ) | 63,681 | 1,137 | ||||||||
Amortization of bond premium | 796 | 1,816 | 1,499 | |||||||||
Impairment of fixed assets | - | - | 3,620 | |||||||||
Gain on sale of fixed assets | - | (75 | ) | - | ||||||||
Non-cash restructuring | - | - | (1,465 | ) | ||||||||
Changes in operating assets and liabilities: | ||||||||||||
Accounts receivable | 1,138 | 3,087 | (2,255 | ) | ||||||||
Inventories | (664 | ) | (925 | ) | 2,882 | |||||||
Prepaid expenses and other current assets | 1,713 | 2,442 | (3,126 | ) | ||||||||
Other assets and liabilities | 1,490 | (813 | ) | (310 | ) | |||||||
Accounts payable | 322 | (240 | ) | (1,929 | ) | |||||||
Accrued liabilities | 866 | (567 | ) | (2,708 | ) | |||||||
Income taxes payable | 1,145 | (1,182 | ) | (21 | ) | |||||||
Net cash provided by operating activities | 29,011 | 30,382 | 19,334 | |||||||||
Cash flows from investing activities: | ||||||||||||
Purchase of property, plant and equipment | (430 | ) | (1,117 | ) | (1,447 | ) | ||||||
Proceeds from sales of property, plant and eqipment | - | 100 | - | |||||||||
Purchases of marketable securities | (100,074 | ) | (210,693 | ) | (142,134 | ) | ||||||
Proceeds from sales and maturities ofmarketable securities | 105,985 | 161,035 | 190,728 | |||||||||
Business acquisition | - | - | (2,200 | ) | ||||||||
Net cash provided by (used in)investing activities | 5,481 | (50,675 | ) | 44,947 | ||||||||
Cash flows from financing activities: | ||||||||||||
Dividends paid | (39,646 | ) | (60,534 | ) | (60,388 | ) | ||||||
Decrease (increase) in restricted cash | 25,000 | (25,000 | ) | - | ||||||||
Proceeds from exercise of stock options | 1,732 | 1,162 | 760 | |||||||||
Proceeds from long-term debt | - | 52,000 | 52,000 | |||||||||
Payments of long-term debt | (10,000 | ) | - | - | ||||||||
Payments for debt issuance costs | (296 | ) | (164 | ) | (53 | ) | ||||||
Purchase of treasury stock | (2,738 | ) | - | (93 | ) | |||||||
Net cash used in financing activities | (25,948 | ) | (32,536 | ) | (7,774 | ) | ||||||
Increase (decrease) in cash and cash equivalents beforeeffect of exchange rate changes | 8,544 | (52,829 | ) | 56,507 | ||||||||
Effect of exchange rate changes on cash andcash equivalents | (156 | ) | (138 | ) | 107 | |||||||
Increase (decrease) in cash and cash equivalents | 8,388 | (52,967 | ) | 56,614 | ||||||||
Cash and cash equivalents, beginning of year | 133,150 | 186,117 | 129,503 | |||||||||
Cash and cash equivalents, end of year | $ | 141,538 | $ | 133,150 | $ | 186,117 |
See Notes to Consolidated Financial Statements.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
Three years endedMarch 1, 2015
(Amounts in thousands, except share (unless otherwise stated), per share and option amounts)
1. Summary of Significant Accounting Policies
Park Electrochemical Corp. (“Park”), through its subsidiaries (collectively, the “Company”), is a global advanced materials company which develops, manufactures, markets and sells high-technology digital and RF/microwave printed circuit materials products principally for the telecommunications and internet infrastructure and high-end computing markets and advanced composite materials, parts and assemblies and low-volume tooling products for the aerospace markets.
a. | Principles of Consolidation – The consolidated financial statements include the accounts of Park and its subsidiaries. All significant intercompany balances and transactions have been eliminated. |
b. | Use of Estimates – The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“US GAAP”) requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results may differ from those estimates. In addition, certain amounts in the prior years' consolidated statements of stockholders’ equity, consolidated statements of cash flows and Note 3, “Other Balance Sheet Data”, have been reclassified to conform to the current year presentation. |
c. | Accounting Period – The Company’s fiscal year is the 52 or 53 week period ending the Sunday nearest to the last day of February. The |
d. | Fair Value Measurements –Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability (i.e., the “exit price”) in an orderly transaction between market participants at the measurement date. |
Fair value measurements are broken down into three levels based on the reliability of inputs as follows: |
Level 1 inputs are quoted prices in active markets for identical assets or liabilities that the Company has the ability to access at the measurement date. An active market for the asset or liability is a market in which transactions for the asset or liability occur with sufficient frequency and volume to provide pricing information on an ongoing basis. The valuation under this approach does not entail a significant degree of judgment.
| Level 1 inputs are quoted prices in active markets for identical assets or liabilities that the Company has the ability to access at the measurement date. An active market for the asset or liability is a market in which transactions for the asset or liability occur with sufficient frequency and volume to provide pricing information on an ongoing basis. |
Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly. Level 2 inputs include quoted prices for similar assets or liabilities in active markets, inputs other than quoted prices that are observable for the asset or liability (e.g., interest rates and yield curves observable at commonly quoted intervals or current market) and contractual prices for the underlying financial instrument, as well as other relevant economic measures. |
Level 3 inputs are unobservable inputs for the asset or liability. Unobservable inputs are used to measure fair value to the extent that observable inputs are not available, thereby allowing for situations in which there is little, if any, market activity for the asset or liability at the measurement date. |
The fair value of the Company’s cash and cash equivalents, accounts receivable, accounts payable and current liabilities approximate their carrying value due to their short-term nature. Due to the variable interest rates periodically adjusting with the current LIBOR, the carrying value of outstanding borrowings under the Company’s long-term debt approximates its fair value. (See Note 11). Certain assets and liabilities of the Company are required to be recorded at fair value on either a recurring or non-recurring basis. On a recurring basis, the Company records its marketable securities at fair value using Level 1 or Level 2 inputs. (See Note 2). |
The Company’s non-financial assets measured at fair value on a non-recurring basis include goodwill and any long-lived assets written down to fair value. To measure fair value of such assets, the Company uses Level 3 inputs consisting of techniques including an income approach and a market approach. The income approach is based on a discounted cash flow analysis and calculates the fair value by estimating the after-tax cash flows attributable to a reporting unit and then discounting the after-tax cash flows to a present value using a risk-adjusted discount rate. Assumptions used in the discounted cash flow analysis require the exercise of significant judgment, including judgment about appropriate discount rates, terminal value, growth rates and the amount and timing of expected future cash flows. There were no transfers between levels within the fair value hierarchy during the 2015 and 2014 fiscal years. |
During the 2013 fiscal year, the Company impaired the long-lived assets of Nelco Technology (Zhuhai FTZ) Ltd. (See Note 9). |
e. | Cash and Cash Equivalents – The Company considers all money market securities and investments with contractual maturities at the date of purchase of 90 days or less to be cash equivalents. |
Supplemental cash flow information:
The Company classifies amounts required by the Amended Credit Agreement described in Note 11 to be maintained in cash and marketable securities as restricted cash on the consolidated balance sheets. |
Fiscal Year | ||||||||||||
2013 | 2012 | 2011 | ||||||||||
Cash paid during the year for: | ||||||||||||
Income taxes, net of refunds | $ | 5,866 | $ | 6,856 | $ | 6,520 |
The Company paid no interest in the 2013 fiscal year.
Supplemental cash flow information: |
Fiscal Year | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Cash paid during the year for: | ||||||||||||
Income taxes, net of refunds | $ | 1,707 | $ | 612 | $ | 5,866 | ||||||
Interest | 1,380 | 729 | - |
At March 3, 2013 and February 26, 2012, the Company held approximately $786 and $1,604, respectively, of cash and cash equivalents in currencies other than U.S. dollars.
At March 1, 2015 and March 2, 2014, the Company help approximately $28,970 and $27,195, respectively, of cash equivalents in foreign financial institutions. |
f. | Marketable Securities – All marketable securities are classified as available-for-sale and are carried at fair value, with the unrealized gains and losses, net of tax, included in comprehensive |
included in interest and other income, net. The cost of securities sold is based on the specific identification method.
g. | Inventories – Inventories are stated at the lower of cost (first-in, first-out method) or market. The Company writes down its inventory for estimated obsolescence or unmarketability based upon the age of the inventory and assumptions about future demand for the Company's products and market conditions. |
h. | Revenue Recognition – The Company recognizes revenues when products are shipped and title has been transferred to a customer, the sales price is fixed and determinable, and collection is reasonably assured. All material sales transactions are for the shipment of |
i. | Sales Allowances and Product Warranties– The Company provides for the estimated costs of sales allowances at the time such costs can be reasonably estimated. The Company’s products are made to customer specifications and tested for adherence to specifications before shipment to customers. Composite parts and assemblies may be subject to “airworthiness” acceptance by customers after receipt at the customers’ locations. There are no future performance requirements other than the products’ meeting the agreed specifications. The Company’s bases for providing sales allowances for returns are known situations in which products may have failed due to manufacturing defects in products supplied by the Company. The Company is focused on manufacturing the highest quality |
j. | Accounts Receivable –The Company’s accounts receivable are due from purchasers of the Company’s products. Credit is extended based on evaluation of a customer’s financial condition and, generally, collateral is not required. Accounts receivable are due within established payment terms and are stated at amounts due from customers net of an allowance for doubtful accounts. Accounts outstanding longer than established payment terms are considered past due. The Company determines its allowance by considering a number of factors, including the length of time accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the conditions of the general economy and the electronics and aerospace industries. |
k. | Valuation of Long-Lived Assets – The Company assesses the impairment of long-lived assets whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Important factors that could trigger an impairment review include, but are not limited to, significant negative industry or economic trends and significant changes in the use of the Company's assets or strategy of the overall business. No impairments of long-lived assets were identified in the 2015, 2014 or 2013 fiscal years other than impairments associated with restructuring activities. (See Note 9). |
could trigger an impairment review include, but are not limited to, significant negative industry or economic trends and significant changes in the use of the Company's assets or strategy of the overall business. No impairments of long-lived assets were identified in the 2013, 2012 or 2011 fiscal years other than impairments associated with restructuring activities. (See Note 9).
l. | Goodwill and OtherIntangible Assets – Goodwill is not amortized. Other intangible assets are amortized over the useful lives, which is 15 years, of the assets on a straight line basis. The Company tests for impairment of intangible assets whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable.With respect to goodwill, the Company first assesses qualitative factors to determine whether it is more likely than not that the fair value is less than |
m. | Shipping Costs – The amounts paid by the Company to third-party shippers for transporting products to customers, which are not reimbursed by customers, are classified as selling expenses. The shipping costs included in selling, general and administrative expenses were approximately |
n. | Property, Plant and Equipment – Property, plant and equipment are stated at cost less accumulated depreciation and amortization. The Company capitalizes additions, improvements and major renewals and expenses maintenance, repairs and minor renewals as incurred. Depreciation and amortization are computed principally by the straight-line method over the estimated useful lives of the assets. Machinery, equipment, furniture and fixtures are generally depreciated over 10 years. Building and leasehold improvements are generally depreciated over 25-30 years or the term of the lease, if shorter. The depreciation and amortization expenses associated with property, plant and equipment were |
o. | Income Taxes – Deferred income taxes are provided for temporary differences in the reporting of certain items, such as depreciation and undistributed earnings of foreign subsidiaries, for income tax purposes |
Tax benefits are recognized for an uncertain tax position when, in the Company’s judgment, it is more likely than not that the position will be sustained upon examination by a taxing authority. For a tax position that meets the more-likely-
than-not
Tax benefits are recognized for an uncertain tax position when, in the Company’s judgment, it is more likely than not that the position will be sustained upon examination by a taxing authority. For a tax position that meets the more-likely-than-not recognition threshold, the tax benefit is measured as the largest amount that is judged to have a greater than 50% likelihood of being realized upon ultimate settlement with a taxing authority. The liability associated with unrecognized tax benefits is adjusted periodically due to changing circumstances and when new information becomes available. Such adjustments are recognized entirely in the period in which they are identified. The effective tax rate includes the net impact of changes in the liability for unrecognized tax benefits and subsequent adjustments as considered appropriate by the Company. While it is often difficult to predict the final outcome or the timing of resolution of any particular tax matter, the Company believes its liability for unrecognized tax benefits is adequate. Interest and penalties recognized on the liability for unrecognized tax benefits are recorded as income tax expense.
2. MArketable Securities
The following is a summary of available-for-sale securities:
The following tables show the amortized cost basis, gross unrealized gains and losses and
The estimated fair values of such securities at March
3. Other balance sheet data Other balance sheet data consisted of the following:
Property,
The income tax provision includes the following:
The Company continuously evaluates the liquidity and capital requirements of its operations in the United States and of its foreign subsidiaries. As a result of such evaluation, the Company recorded a non-cash charge for the accrual of U.S. deferred income taxes in the amount of $63,958 on undistributed earnings of the Company’s subsidiary in Singapore during the fourth quarter of the 2014 fiscal year. No such charge was made in the 2015 fiscal year.
State income tax benefits from loss carryforwards to future years are recognized as deferred tax assets in the 2014 and 2013 fiscal
The components of earnings before income taxes were as follows:
The Company’s effective income tax rate differs from the statutory U.S. Federal income tax rate as a result of the following:
The Company had The Company has foreign tax credit carryforwards of $486 and
The Company had New York State investment tax credit carryforwards of
The deferred tax asset valuation allowance of Significant components of the Company's deferred tax
On the Consolidated Balance Sheets, the current net deferred tax assets
At March A reconciliation of the beginning and ending amounts of unrecognized tax benefits is as follows:
The amount of unrecognized tax benefits may increase or decrease in the future for various reasons, including adding or subtracting amounts for current year tax positions, expiration of statutes of limitation on open income tax years, changes in the Company’s judgment about the level of uncertainty, status of tax examinations, and legislative changes. Changes in prior period tax positions are the result of a re-evaluation of the probability of realizing the benefit of a particular tax position based on new information. It is reasonably possible that
A list of open tax years by major jurisdiction follows:
The Company had approximately
During the 5. STOCK-BASED COMPENSATION
As of March
The compensation expense for stock options includes an estimate for forfeitures and is recognized on a straight line basis over the requisite service period.
The future compensation expense to be recognized in earnings before income taxes for options outstanding at March
The Company records its stock-based compensation at fair value. The weighted average fair value for options was estimated at the dates of grants, using the Black-Scholes option pricing model. The following table represents the weighted average fair value and valuation assumptions used for options granted in the
The During the fourth quarter of the 2015 fiscal year, the Company’s Board of Directors approved a reduction of $1.50 per share in the exercise price of all outstanding options as a result of the special cash dividend of $1.50 per share paid by the Company in February 2015. The reduction in the exercise price was treated as a modification of the stock options for accounting purposes. The modification, based on the fair value of the options both immediately before and after the modification, resulted in a total of incremental compensation expense of $205 during the 2015 fiscal year, which was recorded in selling, general and administrative expenses. Information with respect to stock option activity follows:
The
A summary of the status of the Company’s non-vested options at March 1, 2015, and changes during the fiscal year then ended, is presented below:
6. SHAREHOLDERS’ EQUITY Shareholders’ Rights Plan – On July 20, 2005, the Board of Directors renewed the Company’s shareholders’ rights plan on substantially the same terms as its previous rights plan which expired in July 2005. In accordance with the Company’s shareholders’ rights plan, a right (the “Right”) to purchase from the Company a unit consisting of one one-thousandth (1/1,000) of a share (a “Unit”) of Series B Junior Participating Preferred Stock, par value $1.00 per share (the “Series B Preferred Stock”), at a purchase price of $150 (the “Purchase Price”) per Unit, subject to adjustment, is attached to each outstanding share of the Company’s common stock. The Rights expire on July 20, 2015. Subject to certain exceptions, the Rights will become exercisable 10 business days after a person acquires 20 percent or more of the Company’s outstanding common stock or commences a tender offer that would result in such person’s owning 20 percent or more of such stock. If any person acquires 20 percent or more of the Company’s outstanding common stock, the rights of holders, other than the acquiring person, become rights to buy shares of the Company’s common stock (or of the acquiring company if the Company is involved in a merger or other business combination and is not the surviving corporation) having a market value of twice the Purchase Price of each Right. The Company may redeem the Rights for $.01 per Right until 10 business days after the first date of public announcement by the Company that a person acquired 20 percent or more of the Company’s outstanding common stock.
Treasury Stock– On January 8, 2015, the Company announced that its Board of Directors has authorized the Company’s purchase, on the open market and in privately negotiated transactions, of up to 1,250,000 shares of its common stock, representing approximately 6% of the Company’s 20,945,634 total outstanding shares as of the close of business on January 7, 2015. This authorization supersedes all prior Board of Directors’ authorizations to purchase shares of the Company’s common stock. The Company announced on October 18, 2012 that its Board of Directors had authorized the Company’s purchase, on the open market and in privately negotiated transactions, of up to 1,000,000 shares of its common stock, representing approximately 5% of the Company’s During the
Reserved Common Shares– At March Accumulated Other Comprehensive
7. EARNINGS(LOSS)PER SHARE
Basic earnings (loss) per share are computed by dividing net earnings (loss) by the weighted average number of shares of common stock outstanding during the period. Diluted earnings (loss) per share are computed by dividing net earnings (loss) by the sum of (a) the weighted average number of shares of common stock outstanding during the period and (b) the potential common stock equivalents outstanding during the period. Stock options are the only common stock equivalents; and the number of dilutive options is computed using the treasury stock method.
The following table sets forth the calculation of basic and diluted earnings (loss) per share:
During the 2013 fiscal year, the Company recorded pre-tax other income of $1,000 resulting from the settlement of a business interruption insurance claim at the Company’s Neltec, Inc. (“Neltec”) business unit in Tempe, Arizona and Nelco Products, Inc. (“Nelco”) business unit in Fullerton, California resulting from an interruption of material shipments from one of the Company’s vendors located in Japan to these subsidiaries caused by the March 2011
During the 2013 fiscal year, the Company settled all pending litigation with Isola USA Corporation (“Isola”) for
During the 2013 fiscal year, the Company recorded restructuring charges of $2,730 related to the closure of the Company’s Nelco Technology (Zhuhai FTZ) Ltd. business unit located in Zhuhai, China. The charges
The Company
In the 2015 fiscal year third quarter, the Company recorded
Profit Sharing Plan – The Company and certain of its subsidiaries have a non-contributory profit sharing retirement plan covering substantially all full-time employees in the United States. The plan may be modified or terminated at any time, but in no event may any portion of the contributions revert back to the Company. The Company's estimated contributions are accrued at the end of each fiscal year and paid to the plan in the subsequent fiscal year. The Company’s contributions to the plan were
Savings Plan– The Company also sponsors a 401(k) savings plan, pursuant to which the contributions of employees of certain subsidiaries were partially matched by the Company in the amounts of
On January 30, 2013, the Company entered into a five-year revolving credit facility agreement On February 12, 2014, the Company entered into a four-year amended and restated revolving credit facility agreement (the “Amended Credit Agreement”) with PNC Bank. The Amended Credit Agreement provides for loans up to $104,000 (the “Amended Facility”) to the Company and letters of credit up to $2,000 for the account of the Company. Through March 1, 2015, the Company has borrowed $52,000 to finance a special dividend paid to shareholders of the Company in the 2014 fiscal year fourth quarter and an additional $52,000 to continue the loan that was provided under the Credit Agreement, and PNC Bank has issued two standby letters of credit for the account of the Company in the total amount of
Borrowings under the Amended Facility bear interest at a rate equal to, at the Company’s option, either a (a) LIBOR rate option determined by a fluctuating rate per annum equal to the LIBOR Rate plus
The Amended Credit Agreement under the Amended Credit Agreement are guaranteed by its Nelco Products, Inc., Neltec, Inc. and Park Aerospace Technologies Corp. subsidiaries and secured by a pledge of 65% of the capital stock of the Company’s Nelco Products Pte. Ltd. subsidiary in Singapore. The minimum domestic liquid assets of $25,000, for required periods, are reflected as restricted cash on the Consolidated Balance Sheets.
The Amended Facility is available to
At March 1, 2015, scheduled principal maturities of long-term debt were as follows:
The Company conducts certain of its operations in leased facilities, which include several manufacturing plants, warehouses and offices. The leases of facilities are for terms of up to 10 years, the latest of which expires in
These non-cancelable leases have the following payment schedule:
Rental expenses, inclusive of real estate taxes and other costs, were
Litigation
The Company is subject to a number of proceedings, lawsuits and other claims related to environmental, employment, product and other matters. The Company is required to assess the likelihood of any adverse judgments or outcomes in these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is made after careful analysis of each individual issue. The required reserves may change in the future due to new developments in each matter or changes in approach, such as a change in settlement strategy in dealing with these matters. The Company believes that the ultimate disposition of such proceedings, lawsuits and claims will not have a material adverse effect on the liquidity, capital resources, business or consolidated results of operations or financial position of the Company.
Environmental Contingencies
The Company and certain of its subsidiaries have been named by the Environmental Protection Agency (the "EPA") or a comparable state agency under the Comprehensive Environmental Response, Compensation and Liability Act (the "Superfund Act") or similar state law as potentially responsible parties in connection with alleged releases of hazardous substances at four sites.
Under the Superfund Act and similar state laws, all parties who may have contributed any waste to a hazardous waste disposal site or contaminated area identified by the EPA or comparable state agency may be jointly and severally liable for the cost of cleanup. Generally, these sites are locations at which numerous persons disposed of hazardous waste. In the case of the Company's subsidiaries, generally the waste was removed from their manufacturing facilities and disposed at waste sites by various companies which contracted with the subsidiaries to provide waste disposal services. Neither the Company nor any of its subsidiaries have been accused of or charged with any wrongdoing or illegal acts in connection with any such sites. The Company believes it maintains an effective and comprehensive environmental compliance program.
The insurance carriers who provided general liability insurance coverage to the Company and its subsidiaries for the years during which the Company's subsidiaries' waste was disposed at these sites have in the past reimbursed the Company and its subsidiaries for 100% of their legal defense and remediation costs associated with three of these sites.
The total costs incurred by the Company and its subsidiaries in connection with these sites, including legal fees incurred by the Company and its subsidiaries and their assessed share of remediation costs and excluding amounts
Such recorded liabilities do not include environmental liabilities and related legal expenses for which the Company believes that it and its subsidiaries have general liability insurance coverage for the years during which the Company's subsidiaries' waste was disposed at three sites for which certain subsidiaries of the Company have been named as potentially responsible parties. Pursuant to such general liability insurance coverage, two insurance carriers have been paying 100% of the legal defense and remediation costs associated with such three sites since 1985. In the 2012 fiscal year fourth quarter, one of such insurance carriers, which had been paying 45% of such legal defense and remediation costs, indicated that it no longer agreed to such percentage. As a result, the Company
Included in selling, general and administrative expenses are charges for actual expenditures and accruals, based on estimates, for certain environmental matters described above. The Company accrues estimated costs associated with known environmental matters, when such costs can be reasonably estimated and when the outcome appears probable. The Company believes that the ultimate disposition of known environmental matters, including the litigation described above, will not have a material adverse effect on the liquidity, capital resources, business or consolidated results of operations or financial position of the Company.
The Company is a global advanced materials company which develops, manufactures, markets and sells high technology digital and RF/microwave printed circuit materials principally for the telecommunications and internet infrastructure and high-end computing markets and advanced composite materials, parts and assemblies and low volume tooling for the aerospace markets. The Company’s
Sales are attributed to geographic region based upon the region in which the materials were delivered to the customer. Sales between geographic regions were not significant. Financial information regarding the Company’s operations by geographic region is as follows:
15. Customer and Supplier Concentrations Customers – Sales to TTM Technologies Inc. were
While no other customer accounted for 10% or more of the Company's total worldwide sales in the
Sources of Supply – The principal materials used in the manufacture of the Company's high-technology printed circuit materials and advanced composite materials, parts and assemblies are specially manufactured copper foil, fiberglass cloth and synthetic reinforcements, and specially formulated resins and chemicals. Although there is a limited number of qualified suppliers of these materials, the Company has nevertheless identified alternate sources of supply for many of such materials. While the Company has not experienced significant problems in the delivery of these materials and considers its relationships with its suppliers to be strong, a disruption of the supply of material from a principal supplier could adversely affect the Company's business. Furthermore, substitutes for these materials are not readily available, and an inability to obtain essential materials, if prolonged, could materially adversely affect the Company’s business.
16. ACCOUNTING PRONOUNCEMENTS Recently Adopted
In
Recently Issued In May 2014, the FASB issued authoritative guidance on the recognition of revenue from customers. This guidance clarifies when an entity will recognize revenue when it transfers promised goods or services to customers in an amount that reflects what it expects in exchange for the goods or services. This guidance also requires more detailed disclosures to enable users of the financial statements to understand the nature, amount, timing and uncertainty of revenue and cash flows arising from contracts with customers. The current effective date of this guidance is for fiscal years (and interim reporting periods within fiscal years) beginning after December 15, 2016. The Company is currently evaluating the impact this guidance will have on its consolidated results of operations, cash flows, financial position and disclosures and is currently unable to estimate the impact of this guidance. In April 2015, the FASB issued authoritative guidance on the presentation of debt issuance costs. This guidance is intended to simplify the presentation of debt issuance costs by requiring that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. This guidance is effective for fiscal years (and interim reporting periods within fiscal years) beginning after December 15, 2015. The Company does not expect this guidance to have a material impact on its consolidated results of operations, cash flows, financial position and disclosures. 17. SUBSEQUENT EVENT Pursuant to the share purchase authorization announced on January 8, 2015, the Company purchased an aggregate of 444,834 shares during the period March 9, 2015 through April 24, 2015 at an average price paid per share of $21.32 and a total cost of $9,493, leaving an aggregate total of 686,410 shares available to be purchased by the Company pursuant to the aforementioned share purchase authorization. All of such 444,834 shares were purchased by the Company pursuant to a Rule 10b5-1 Stock Purchase Plan established by the Company on February 13, 2015 and terminated by the Company on April 24, 2015. Additional purchases by the Company pursuant to the aforementioned share purchase authorization may occur from time to time in the future. As previously announced by the Company, shares purchased by the Company will be retained as treasury stock and will be available for use under the Company’s stock option plan and for other corporate purposes. PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES Selected Quarterly Financial Data (Unaudited) (Amounts in thousands, except per share amounts)
Earnings (loss) per share are computed separately for each quarter. Therefore, the sum of such quarterly per share amounts may differ from the total for each year. During the fourth quarter of the 2015 fiscal year, the Company’s Board of Directors approved a reduction of $1.50 per share in the exercise price of all outstanding stock options as a result of the special cash dividend of $1.50 per share paid by the Company in February 2015. The reduction in the exercise price was treated as a modification of the stock options for accounting purposes. The modification, based on the fair value of the options both immediately before and after the modification, resulted in a total incremental compensation expense of $205 during the fourth quarter of the 2015 fiscal year, which was recorded in selling, general and administrative expenses. During the fourth quarter of the 2014 fiscal year, the Company provided for U.S. deferred income taxes in the amount of $63,958 on the undistributed earnings of the Company’s subsidiary in Singapore. See Note 4 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report. During the fourth quarter of the 2014 fiscal year, the Company’s Board of Directors approved a reduction of $2.50 per share in the exercise price of all outstanding stock options as a result of the special cash dividend of $2.50 per share paid by the Company in February 2014. The reduction in the exercise price was treated as a modification of the stock options for accounting purposes. The modification, based on the fair value of the options both immediately before and after the modification, resulted in a total incremental compensation expense of $731 during the fourth quarter of the 2014 fiscal year, which was recorded in selling, general and administrative expenses. ITEM 9.CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.
Not applicable.
ITEM 9A. CONTROLS AND PROCEDURES. (a) Disclosure Controls and Procedures.
The Company's management, with the participation of the Company's Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company's disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")) as of March
(b) Management’s Annual Report on Internal Control Over Financial Reporting.
The management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America. The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company, (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company, and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Management assessed the effectiveness of the Company’s internal control over financial reporting as of March The independent registered public accounting firm that audited the Company’s 2015 fiscal year financial statements included in this Annual Report on Form 10-K has issued an attestation report on the Company’s internal control over financial
(c) Attestation Report of the Independent Registered Public Accounting Firm. REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
The Board of Directors and Shareholders Park Electrochemical Corp.
We have audited
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, We have also
/s/
May (d) Changes in Internal Control Over Financial Reporting.
There has not been any change in the Company’s internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the fourth fiscal quarter of the fiscal year to which this report relates that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting. ITEM 9B. OTHER INFORMATION.
None. PART III ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.
The information called for by this item (except for information as to the Company's executive officers, which information appears elsewhere in this Report) is incorporated by reference to the Company's definitive proxy statement for the ITEM 11. EXECUTIVE COMPENSATION.
The information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.
The information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.
The information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.
This information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the PART IV
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Date: May 15, 2015 PARK ELECTROCHEMICAL CORP. By: /s/ Brian E. Shore_______________ Brian E. Shore, Chief Executive Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES
SCHEDULE II – VALUATION AND QUALIFYING ACCOUNTS
(A) Uncollectible amounts, net of recoveries
EXHIBIT INDEX
* Filed electronically herewith. + Pursuant to Rule 406T of Regulation S-T, the Interactive Data Files on Exhibit 101 hereto are deemed not filed or part of a registration statement or prospectus for purposes of Section 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections. 79 |