UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the Fiscal Year ended:February 29, 201228, 2014

Commission File Number:0-16035

SONO-TEK CORPORATION

(Name of registrant as specified in its charter)

Registrant's Telephone Number, Including Area Code:(845) 795-2020

Securities Registered Pursuant to Section 12(b) of the Act: None

Securities Registered Pursuant to Section 12(g) of the Act:Common Stock, $.01 par value

(Title of Class)

Indicate by checkmark if the registrant is a well knownwell-known seasoned issuer, as defined in Rule 405 of the Securities Act.☐ Yes☒ No

Indicate by checkmark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.☐ Yes☒ No

Indicate by checkmark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.☒ Yes☐ No

Indicate by checkmark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (section 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).☒ Yes☐ No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-BS-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.☐☒

Indicate by checkmark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check One):

Large Accelerated Filer☐    Accelerated Filer☐    Non-accelerated Filer☐    Smaller reporting company☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).   YES☐ NOYes   ☒ No

As of August 31, 2011,2013, the last business day of the Registrant’s most recently completed second fiscal quarter, the aggregate market value of the Registrant's Common Stock held by non-affiliates of the Registrant was approximately $15,642,525$10,246,005 computed by reference to the average of the bid and asked prices of the Common Stock on said date, which average was $1.28.$.86.

The Registrant had 14,455,44414,708,518 shares of Common Stock outstanding as of April 27, 2012.29, 2014.

DOCUMENTS INCORPORATED BY REFERENCE: None.

PART I

ITEM 1  DESCRIPTION OF BUSINESS

Organization and Business

Sono-Tek Corporation (the “Company”, “Sono-Tek”, “We” or “Our”) was incorporated in New York on March 21, 1975 for the purpose of engaging in the development, manufacture and sale of ultrasonic liquid atomizing nozzles. Ultrasonic nozzle systems atomize low to medium viscosity liquids by converting electrical energy into mechanical motion in the form of high frequency ultrasonic vibrations that break liquids into minute drops that can be applied to surfaces at low velocity. The principal advantage of these nozzle systems is that they use much less liquid than competitive nozzle systems to attain the required coatings on solar cells, fuel cells, glass, textiles, food and food packaging, circuit boards, medical devices and many other coating applications. This advantage translates into lower costs for materials, less water consumption, less energy required for subsequent drying operations and less release into the environment of spray that would normallytypically bounce back withand scatter while using competitive nozzle systems. These factors are increasingly important to customers at a time of rising commodity and energy costs and supply limitations.

We use our core technology – ultrasonic spray coating – to provide customized coating solutions to a wide range of industrial manufacturing companies, enabling them to reduce their product costs and to develop new products with superior features and quality.

At the present time, our customers are in six major industries: electronics, advanced energy (solar and fuel cells), medical device, glass, textiles and foods. Our diversified group of customers provides the base for both financial stability and business growth opportunities.

In addition, our systems are being used under confidentiality agreementswidelyused by leading high tech companies and research institutions, as well as by governmental, defense, energy and health agencies of governments from around the world.

Markets

An outcome of ourOur rapid growth and diversification program over the past twoseveral years is that we are now capable of offeringhas positioned us to offer a unique and superior family of customized products to the six major industries we serve. All of these systems are based on our core technology of ultrasonic spray coating. Many of these systems have been commercially proven in 24/7 working schedules, under harsh and challenging industrial manufacturing environments, where they provide value in a continuous and reliable fashion.

1.  Electronics Industry.

We serve this industry by providingprimarily in two sectors; Printed Circuit Board (PCB) manufacturing and Semiconductor manufacturing.

We provide manufacturers of electronic printed circuit boardsPCBs with state-of-the-art solder fluxers. Spray fluxers are used in the manufacturing process of  PCBs to apply flux, which removes oxidation and prepares the PCB for the process of soldering components onto it.

Our ultrasonic spray fluxers reduce the amount of fluxing chemical needed, enhance the quality of the boards, and provide our customers with a better product at reduced costs of operations, when compared with conventional foam fluxers and pressure assisted fluxers.

We are recognized as a standard setter in the industry and our systems are incorporated by various original equipment manufacturers (OEM), in their own manufacturing lines for making electronic printed circuit boards. Some examples of products that we market to the electronics industry include: SonoFlux 2000F, SonoFlux 2000FP, SonoFlux XL,SelectaFlux, SonoFlux EZ and SonoFlux Servo.

We also offerPursuant to the same customer base, EVS solder recovery systems, as per ouran exclusive distribution agreement with EVS International Ltd (“EVS”) for the territoryterritories of the United States and Canada.Canada, we offer the EVS solder recovery system to our PCB customer base.

We also have a significant established customer base in the semi-conductor industry. The semi-conductor industry utilizes our ultrasonic atomizing nozzles and XYZ coating platforms for the application and deposition of photo-resist onto semiconductor wafers. Certain of our semi-conductor manufacturing industry customers engaged in the production of micro-electro-mechanical systems, “MEMS”, have proven the ability of our technology to apply micron thick coatings to these complex wafers.

2.  Advanced Energy Industry.

Manufacturers of solar cells and fuel cells share two major technical and business challenges: enhancing the energy efficiency of their products and manufacturing their products in a cost effective way. Extremely uniform, thin layer coatings are at the heart of the solution for these advanced energy systems’ challenges.

Our precision coating systems are now presented in scientific conferences and trade shows around the world for theprovide superior surface uniformity and density, they provide, which are directly related to enhanced energy efficiency. Our systems also afford our energy industry clients with the capabilities of saving up to 80% of the expensive catalysts and nano-materials used in these manufacturing processes. Some examples of our products marketed to the advanced energy industry include: ExactaCoat FC & SC, FlexiCoat HypersonicFC & SC, and SonoFlow CSP.Fusion.

3.  Medical Device Industry.

Our ultrasonic coating technology is being used by medical device manufacturers worldwide. The leading applications for this industry are coating of arterial stents with precise and uniform micronic layers of polymers and drugs; coating of various implantable devices with lubricous materials and coating of blood collection tubes with anti-coagulants. These applications are typically performed under strict regulatory supervision of governmental agencies in different countries, and the continuing demand for our systems from these customers is indicative of the high quality performance that our systems provide these customers.

Some examples of our products marketed to the medical device industry include: MediCoat I; Medicoat II; Medicoat SPI;PSI; AccuMist; MicroMist.MicroMist; Balloon Catheter Coater.

4.  Glass Industry.

The manufacture of float glass occurs under extremely harsh conditions of elevated temperatures. Our ultrasonic coating technology provides this manufacturing process with the means of preciseto precisely and uniform application ofuniformly apply anti-stain, and other specialty chemical agents, on the hot glass. Our customers benefit from an improved quality product, enhanced productivity and significantly reduced expenditures on annual maintenance, often resulting in a return on investment of less than one year. Based on this equipment’s recent successful performance, our systems are now specified by many global glass manufacturers as their equipment of choice.

The equipment we offer to the glass industry is the WideTrack – wide area modular coating system.

5.  Textiles Industry.

The textiles industry has yetis rapidly expanding to recover from the recent economic downturn related to the declines in new housing construction (carpets), automotive and clothing (fabrics).

This industry coats expensive chemicalsintroduce high performance value adding coatings onto fabrics, such as anti-microbial, anti-stain, flame retardant anti-stain, anti-microbial as well asand moisture barriers, which are currently applied using inefficient dip or padding methods, resulting inbarriers. The current manufacturing process for applying these expensive coatings has significant waste of material, energy and water. We are working with this industry to incorporate our ultrasonic technology; often in combination with unique pre and post treatments of the coating materials, to reduce the effective material usage by as much as 90%.

We have demonstrated to a fewseveral leading textile manufacturers the technical advantages and financial benefits of our WideTrack coating system for their specific operations, and we are hopeful that these manufacturers will prioritize the WideTrack in their future capital investment budgets, as soon as the general economy improves.budgets.

6.  Food Industry.

The food industry is traditionally a slow adapter to new technologies. Accordingly, we focus our efforts on a select few global food companies, where our technical advantages and economic benefits could translate into successful market penetration and sales growth. We have introduced our ultrasonic coating systems to various segments of the food industry. These include: baked goods, dairy, meat and biodegradable food packaging. The leading applications areindustry, with our primary focus on coating of flavors, oils, nutriceuticals and anti-microbial agents, decorative glazes and coating of moisture barrier compounds on films, trays and cups.agents. Most of our food industry equipment is designed on the WideTrack platform.

Products

We have core technology and have developed and market the following products:

Other Product Offerings – EVS Solder Recovery System

We have an exclusive distribution relationship with EVS International. Ltd. (“EVS”), a U.K. Company, to distribute EVS’s line of solder recovery systems and spares parts. The territory for this distribution relationship isspare parts in the United States and Canada. EVS manufactures the EVS6000, EVS3000 and the EVS1000 solder recovery systems which are used to reclaim solder from the dross which accumulates in the wave-solder equipment of circuit board manufacturers. The customer base for distribution of these systems is synergistic with Sono-Tek’sour existing customer base for spray fluxer sales in the printed circuit board industry.

Manufacturing

We purchase circuit board assemblies and sheet metal components from outside suppliers. These materials are available from a wide range of suppliers throughout the world. All raw materials used in our products are readily available from many different domestic suppliers. We also purchase certain systems and subsystems to supplement our in-house manufacturing. These items are integrated with our ultrasonic system technology to meet specific applications.

We provide a limited warranty on all of our products covering parts and labor for a period of one year from the date of sale.

We own an industrial park in Milton, NY.New York. The park has 50,000 square feet of leaseableleasable area and we use more than half the space.space for manufacturing.

We have a business and quality control system that meets the qualifications of ISO 9001/2000.2008. We were ISO 9001 registered in September 1998 and we have been recertified annually since then.

Research and Development

We believe that our long-term growth and stability is linked to the development and release of products that provide solutions to customer needs across a wide spectrum of industries, while advancing the utility of our core technology. We expended approximately $1,129,000$885,000 and $823,000$894,000 for Fiscal Years 20122014 and 20112013,respectively, on new engineering and product development. In addition, we added application engineers to our sales organizations, and these engineers work closely with customers and technical staff to develop new applications for our technology and equipment.

Patents and Licenses

Our business is based in part on the technology covered by our United States patents. We also rely on unpatented know-how in the design and production of our nozzle systems. We have executed non-disclosure and non-compete agreements with all of our employees to safeguard our intellectual property. We execute reciprocal non-disclosure agreements with our key customers to safeguard any jointly developed intellectual property. We also have an exclusive license from Cornell University for a patented vacuum deposition system using our ultrasonic nozzles.

During the fiscal year ended February 29, 2012,In recent years we have made significant progress on building our intellectual property portfolio. We have a patent pending covering a new design for our entire line of nozzle systems. We have also applied for patents on the following projects:

·New air shaping technology (US - Chinese patent applications).

·New ultrasonic atomizing nozzle methods for the food industry.

·New type of ultrasonic syringe pump for fuel cell liquids and other nano particle suspensions.

In addition, the United States Patent and Trademark Office granted us a patent for a process for coating three dimensional substrates with thin organic films and products. This process uses our ultrasonic nozzles to produce micro-droplets in a vacuum chamber, which then produce a smooth, continuous, uniform conformal coating on various surfaces such as cardiovascular stents, diabetes monitors and other implantable medical devices. We also were recently granted a patent for a novel ultrasonic nozzle design based on ceramic materials that can achieve very high frequencies, smaller droplets and higher flow rates.

Marketing and Distribution

Our products are marketed and distributed through independent distributors, sales representatives, or sales representative companies, OEMs, and through an in-house direct sales force. Many of our sales leads are generated from our Internet web site and from attendance at major industry trade shows.

In addition to the above, we have engaged an external marketing firm to expand awareness of our products in our targeted industries, and make use of the Internet with our web page and other techniques.

Competition

We operate in competitive markets in the electronics and stent coating industries. We compete against global and regional manufacturers of nozzles and other products based on price, quality, product features and follow up service. We maintain our competitive position by providing highly effective solutions that meet our customers’ requirements and needs. In other markets, we encounter less competition based on the uniqueness of our ultrasonic technology in these applications.

Significant Customers

We have significant geographic and market diversification. OneOur largest customer accounted for 6.7%approximately 10% of our sales for Fiscal Year ended February 29, 2012.28, 2014.

Foreign and Export Sales

During Fiscal Years 20122014 and 2011,2013, sales to foreign customers accounted for approximately $7,385,000$6,447,000 and $5,624,000,$5,157,000, or 62%63% and 57%54% respectively, of total revenues.

Employees

As of February 29, 2012,28, 2014, we employed 5554 full-time employees and 8three part-time employees. We believe that relations with our employees are generally good.

Available Information

We have filed reports, proxy statements and other information with the Securities and Exchange Commission. Copies of our reports, proxy statements and other information may be inspected and copied at the public reference facilities maintained by the SEC, at SEC, Public Reference Section, 100 F Street, N.E., Washington, DC 20549. The public may obtain information on the operation of the SEC’s public reference facilities by calling the SEC at 1-800-SEC-0330. The SEC maintains a website that contains reports, proxy statements and other information regarding us. The address of the SEC website ishttp://www.sec.gov.www.sec.gov. We will also provide copies of our Forms 8-K, 10-K, 10-Q, Proxy and Annual Report at no charge available through our website athttp://www.sono-tek.com as soon as reasonably practicable after filing electronically such material with the SEC. Copies are also available, without charge, from Sono-Tek Corporation, 2012 Route 9W, Milton, NY 12547.

ITEM 1A   RISK FACTORS – Not Required for Smaller Reporting Companies.

ITEM 1BUNRESOLVED STAFF COMMENTS - None.

ITEM 2   DESCRIPTION OF PROPERTIES

We own an industrial park located in Milton, NY.New York. The industrial park consists of approximately 50,000 square feet of office and warehouse space. Approximately 25,000 square feet of the park is leased or available for lease at any given time. The property is subject to a twentyten year mortgage, of which nineteenten years remain.

Our offices, product development, manufacturing and assembly facilities are located in the industrial park. We presently utilize a 13,000 square foot building and 10,000 square feet of additional office and storage space in an adjacent building. We also use unleased portions of the remaining space for equipment storage and special product tests. Our current manufacturing areas consist of (i) a machine shop, (ii) a nozzle assembly/test area, (iii) an electronics assembly area, (iv) an area for assembling and testing final products and systems and (v) a receiving and shipping area. We believe our facilities will be adequate for the foreseeable future.

We presently maintain a sales and service office in Hong Kong and an equipment demonstration room in Shenzhen, China. The office and demonstration room are located on the premises of one of our product distributors.

ITEM 3   LEGAL PROCEEDINGS – None

ITEM 4MINE SAFETY DISCLOSURES – Not Applicable

PART II

ITEM 5MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Prior to February 21, 2011, our Common Stock traded in the over-the-counter market on the OTC Bulletin Board. Since February 22, 2011 ourOur common stock has been tradedtrades on the over-the-counter QB platform. The following table sets forth the range of high and low closing bid quotations for our Common Stock for the periods indicated.

The above quotations are believed to represent inter-dealer quotations without retail markups, markdowns or commissions and may not represent actual transactions.

As of February 29, 2012,28, 2014, there were 195187 shareholders of record of our Common Stock, according to our stock transfer agent. We estimate that we have between 1,000 and 1,400 beneficial shareholders of our common stock. The difference between the shareholders of record and the total shareholders is due to stock being held in street names at our transfer agent.

We have not paid any cash dividends on our Common Stock since inception. We intend to retain earnings, if any, for use in our business and for other corporate purposes.

ITEM 6 SELECTED FINANCIAL DATA – Not Required for Smaller Reporting Companies.

ITEM 7  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-Looking Statements

We discuss expectations regarding our future performance, such as our business outlook, in our annual and quarterly reports, press releases, and other written and oral statements. These “forward-looking statements” are based on currently available competitive, financial and economic data and our operating plans. They are inherently uncertain, and investors must recognize that events could turn out to be significantly different from our expectations. These factors include, among other considerations, general economic and business conditions; political, regulatory, competitive and technological developments affecting our operations or the demand for our products; timely development and market acceptance of new products; adequacy of financing; capacity additions, the ability to enforce patents and the ability to achieve increased sales volume and continued profitability.

We undertake no obligation to update any forward-looking statement.

Overview

We have developed a unique and proprietary series of ultrasonic atomizing nozzles, which are being used in an increasing variety of electronics, advanced energy (solar and fuel cells), medical device, glass, textiles and food applications. These nozzles are electrically driven and create a fine, uniform, low velocity spray of atomized liquid particles, in contrast to common pressure nozzles. These characteristics create a series of commercial applications that benefit from the precise, uniform, thin coatings that can be achieved. When combined with significant reductions in liquid waste and less overspray than can be achieved with ordinary pressure nozzle systems, there is lower environmental impact and lower energy use.

Market Diversity

During the past four years we have invested significant time, monies and efforts to enhance our market diversity. Based on our core ultrasonic coating technology, we increased our portfolio of products, the industries we serve and the countries in which we operate.

Today we serve six major industries: electronics, advanced energy (solar and fuel cells), medical device, glass, textiles and food.

MostA majority of our sales now originate outside the United States, and we are geographically present directly and through distributors and trade representatives in North and Latin America, Europe and Asia. The infrastructure upon which this diversified market approach is based, includes a newly equipped process development laboratory, a strengthened sales organization with application engineers, an engineering team with additional talent and the latest, most sophisticated design software tools, as well as an expanded, highly trained installation and service organization.

The new products which were introduced, the new markets that were penetrated, and the regions in which we now operate, are a strong foundation for our future sales growth and enhanced profitability.

Liquidity and Capital Resources

Working Capital -Our working capital increased $1,333,000$73,000 from a working capital of $3,322,000$4,680,000 at February 28, 20112013 to $4,655,000$4,753,000 at February 29, 2012.28, 2014. The increase in working capital this year is due to the current year’sto: net income which resulted inof $484,000 and cash proceeds of $1,600,000 from a note payable, offset by cash outflows of $57,000 for patent and other asset costs, $224,000 for the purchase of equipment and furnishings and $2,043,000 for the repayment of notes payable and $65,000 for an increase in cash. Ourthe current maturities of our long term debt. In addition, we incurred non-cash expenses for depreciation and amortization expense of $344,000, stock based compensation expense of $18,000 and $15,000 from the write-off of impaired acquisition costs. The Company’s current ratio is 4 to 1 at February 29, 2012, as compared to 3.1was 3.6 to 1 at February 28, 2011.2014 as compared to 5.3 to 1 at February 28, 2013.

Our customer deposits on hand increased $294,000 from $69,000 at February 28, 2013 to $363,000 at February 28, 2014.

Stockholders’ Equity - Stockholders' equity increased $1,491,000$503,000 from $4,317,000$5,992,000 at February 28, 20112013 to $5,808,000$6,495,000 at February 29, 2012.28, 2014. The increase in stockholders’ equity is the result of the current year’s net income of $1,432,000,$484,000 and stock based compensation of $49,000 and the exercise of stock options for $10,000.$18,000.

Operating Activities –Our operating activities provided $1,192,000$1,668,000 of cash for the year ended February 29, 201228, 2014 as compared to providing $1,158,000$611,000 for the year ended February 28, 2011.2013. During the year ended February 29, 2012,28, 2014, we had net income of $1,432,000,$484,000, accounts receivable decreased $222,000,$69,000, inventories increased $691,000,decreased $159,000, prepaid expenses and other assets decreased $25,000, deferred tax assets increased $86,000 and$81,000, accounts payable and accrued expenses andincreased $236,000, customer deposits decreased $125,000increased $294,000 and income taxes payable increased $37,000.$123,000. In addition, we incurred non-cash expenses of $330,000$344,000 for depreciation and amortization, and $48,000$18,000 for stock based compensation expense.

For the year ended February 29, 2012, our inventories increased $691,000 when compared to February 28, 2011. During the current year, raw materials increased $497,000, work in process decreased $50,000, finished goods increased $176,000 and ourexpense, $(5,000) for inventory reserve, $12,000 for allowance for obsolescence decreased $68,000. The increase in raw materials is a resultaccounts receivable and $15,000 for the write-off of our accelerated purchasing strategy. The change in purchasing was to reduce our time needed to fulfill customer orders and a build-up in anticipation of increased sales volume. As of February 29, 2012, we have eliminated our accelerated purchasing strategy and purchase materials only when needed for customer orders. Our finished goods increased due to customer orders that were shipped after February 29, 2012.impaired assets costs.

Investing Activities -For the year ended February 29, 2012, we used $491,000 in28, 2014, our investing activities provided $65,000 as compared to using $2,993,000$1,106,000 for the year ended February 28, 2011.2013. In 20122014 and 2011,2013, we used $475,000$224,000 and $195,000,$352,000, respectively, for the purchase or manufacture of equipment, furnishings and leasehold improvements. In addition, in 20122014 and 20112013, we used $12,000$56,000 and $9,000,$32,000, respectively, for patent application and other asset costs. In 2012 and 20112014, we used $5,000 and $249,000, respectivelyhad proceeds of $345,000 from the sale of marketable securities as compared to the use of $722,000 for the purchase of marketable securities. In 2011 we used $2,540,000 for the purchase of land, buildings and improvements.securities in 2013

Financing Activities –OurFor the year ended February 28, 2014, we used $443,000 in our financing activities provided $147,000as compared to using $96,000 of cash for the year ended February 29, 2012 as compared to providing $1,731,000 for the year ended February 28, 2011. During the year ended February 29, 2012, we had proceeds of a note payable for $237,000 for the purchase of additional production equipment. During the year ended February 28, 2011, we had proceeds of a note payable for $2,100,000 for the purchase of land, buildings and improvements. In 2011, we repaid the outstanding balance of our line of credit of $350,000.2013. We had proceeds of $10,000$210 and $3,000$25,000 for stock option exercises in 20122014 and 2011,2013, respectively. In addition, we made repayments of notes payable of $100,000$2,043,000 and $22,000$121,000 in 20122014 and 2011,2013, respectively. During the year ended February 28, 2014, we had proceeds of a note payable for $1,600,000 for the refinancing of the industrial park in which our operations are located.

Net Increase in Cash –For the year ended February 29, 2012,28, 2014, our cash balance increased by $848,000 as$1,291,000as compared to a decrease of $104,000$591,000 for the year ended February 28, 2011.2013. During the year ended February 29, 2012,28, 2014, our operations provided $1,192,000$1,668,000 of cash, our investing activities provided $65,000 and we used $491,000$443,000 in investing activities and our financing activities provided $147,000activities.

Net Decrease in Marketable Securities –For the year ended February 28, 2014, our marketable securities decreased to $631,000 from $976,000 at February 28, 2013. The decrease is due to the sale of cash.our marketable securities during the year ended February 28, 2014.

We currently have a revolving credit line of $750,000 and a $250,000 equipment purchase facility, both of which are with a bank. The revolving credit line is collateralized by all of the assets of the Company, except for the land and buildings. The line of credit is payable on demand and must be retired for a 30 day period once annually. As of February 29, 2012,28, 2014, we had no outstanding borrowings under the line of credit.

We had outstanding borrowings of $199,000$81,000 under the equipment facility at February 29, 2012.28, 2014. The borrowing has a repayment term of 48 months and bears interest at 2.12%. per annum.

We had outstanding borrowings under a note payable of $2,036,000$1,589,000 at February 29, 2012.28, 2014. The note is payable over 20ten years and bearsaccrues interest at 5.5%4.15%. The note payable is secured by a mortgage on our land and buildings.

Results of Operations

Ultrasonic Spraying – Sales and Gross Profit:

For the year ended February 29, 2012,28, 2014, our sales increased by $2,139,000$712,000 to $12,053,000$10,202,000 as compared to $9,914,000$9,491,000 for the year ended February 28, 2011,2013, an increase of 22%7.5%. ForDuring the year ended February 29, 2012,28, 2014, we experienced an increase in sales of our stent coaternozzles and generators, widetrack units, fluxersXYZ units, servo units, lead solder recovery systems and related accessories and our Flexicoat and Exactacoat (XYZ) Platformspray dryer units. During the current year, weWe did, experiencehowever, see a decrease in sales of our WideTrackstent coating units due toand a slight decrease in demand from float glass manufacturers. fluxers and fluxer related equipment.

For the year ended February 29, 2012,28, 2013, we were affected by the slowdown of solar energy projects due to an overcapacity in that industry, combined with a decrease in government incentives. This market remained slow in the year ended February 2014.

For the year ended February 28, 2014, sales to customers located in European countries increased by $1,580,000$597,000 or 126%47%, sales to customers located in Asian countries increaseddecreased by $212,000$74,000 or 6%2% and sales to other non-based US customers increased $270,000 or 54%. Sales to U.S. based customers increaseddecreased by $272,000$78,000 or 6%2%.

Our gross profit increased $1,394,000,$201,000, to $6,166,000 for the year ended February 29, 2012 from $4,772,000$4,733,000 for the year ended February 28, 2011. Our gross margin percentage was 50%2014 from $4,532,000 for the year ended February 29, 201228, 2013. Our gross profit margin percentage was 46% for the year ended February 28, 2014 compared to 48% for the year ended February 28, 2011.2013. The improvementdecrease in the current year’s gross profit margin is primarily due to an increasea decrease in sales of our stent coater units, an increase in sales of our XYZ platform unitscoating units.

Research and an increase in sales of our fluxer units and related accessories. In addition to the increase in sales of the above product lines, we also saw an increase in the gross margin percentages of our fluxer units and related accessories, our WideTrack units and our XYZ platform units.Product Development:

Research and product development costs increased $305,000decreased $9,000 to $1,129,000 for the year ended February 29, 2012 as compared to $823,000$885,000 for the year ended February 28, 2011. The increase is due2014 as compared to increased$894,000 for the year ended February 28, 2013. For the year ended February 28, 2014 we experienced decreases in engineering personnelsalaries, insurance and engineering materials.

During the year ended February 29, 2012,28, 2014, we expended approximately $711,000$552,000 for engineering personnel as compared to $534,000 during$572,000 for the year ended February 28, 2011.2013. During the year ended February 29, 2012,28, 2014, we expended approximately $218,000$118,000 for additional research, materials and product development as compared to $50,000 during$128,000 for the year ended February 28, 2011.2013. During the year ended February 28, 2014 we expended approximately $39,000 for insurance as compared to $47,000 for the year ended February 28, 2013. The increasedecrease in these expensesthe above costs was offset by an increase in depreciation expense. During the year ended February 28, 2014, depreciation expense was $89,000 as compared to $64,000 for the year ended February 28, 2013.

Marketing and Selling:

Marketing and selling costs decreased $257,000 to $1,958,000 for the year ended February 28, 2014 as compared to $2,215,000 for the year ended February 28, 2013. For the year ended February 28, 2014, we experienced decreases in international commission expense, travel and entertainment expense, advertising and trade show expenses and depreciation expense.

During the year ended February 28, 2014, we expended approximately $384,000 for commissions as compared to $652,000 for the year ended February 28, 2013, a decrease of $268,000. During the current year, our sales include four large orders that were shipped to Asia. Our international commission expense decreased because these Asian sales originated in house by our internal sales staff and, as such, no external commissions were incurred.

During the year ended February 28, 2014, we expended approximately $121,000 for travel and entertainment as compared to $139,000 for the year ended February 28, 2013, a decrease of $18,000. During the year ended February 28, 2014, we expended approximately $175,000 for advertising and trade show expenses as compared to $219,000 for the year ended February 28, 2013, a decrease of $44,000. During February 28, 2014, depreciation expense was $105,000 as compared to $126,000 for the year ended February 28, 2013. The decrease in the above costs was offset by an increase in salary expenses. During February 28, 2014, salary expenses were $1,044,000 as compared to $960,000 for the year ended February 28, 2013, an increase of $84,000.

General and rental expense.Administrative:

General and administrative costs decreased $137,000 to $1,017,000 for the year ended February 28, 2014 as compared to $1,154,000, for the year ended February 28, 2013. For the year ended February 28, 2014, we experienced decreases in salary expense, stock based compensation expense, corporate expenses and outside consulting fees related to the consideration of strategic and enhanced growth opportunities.

During the year ended February 28, 2014, we expended approximately $608,000 for salaries as compared to $675,000 for the year ended February 28, 2013, a decrease of $67,000. During the year ended February 28, 2014, we expended $124,000 for corporate and consulting expenses as compared to $179,000 for the year ended February 28, 2013, a decrease of $55,000. Stock based compensation expense was $18,000 for the year ended February 28, 2014 as compared to $27,000 for the year ended February 28, 2013, a decrease of $9,000.

Marketing and selling costs increased $218,000 to $2,398,000 for the year ended February 29, 2012 from $2,180,000, for the year ended February 28, 2011. The increase is due to increased sales personnel, commissions and trade show and travel expenses. During the year ended February 29, 2012, we expended approximately $1,691,000 for salaries and commissions as compared to $1,503,000 during the year ended February 28, 2011. During the year ended February 29, 2012, we expended approximately $429,000 for travel and trade show expenses as compared to $337,000 during the year ended February 28, 2011. The increase in these expenses was offset by a decrease in depreciation expense and rental expense.

General and administrative costs increased $83,000 to $1,249,000 for the year ended February 29, 2012 from $1,167,000, for the year ended February 28, 2011. The increase is due to salary increases, additional professional and consulting fees and increased corporate expenses. The increase in these expenses was offset by decreases in bad debt expense, rental expense and other miscellaneous expenses.

The twelve month period ended February 28, 2011 includes rent expense of $125,000 allocated as follows:

The twelve months ended February 29, 2012 results do not include any rental expense as all inter-company transactions are eliminated in consolidation due to our purchase of the Sono-Tek Industrial Park in December 2010.Rental Real Estate Operations:

Real estate operations expense are expenses for the operations of the Sono-Tek Industrial Park. All inter-company revenue is eliminated in consolidation. For the yearfiscal years ended February 29, 2012,2014 and 2013, the results of our rental real estate operations are as follows:

It should be noted thatRental income for the Company’s eliminationindustrial park increased $25,000 from $52,000 for the year ended February 28, 2013 to $77,000 for the year ended February 28, 2014. The increase in rental income is a result of rental expense as detailedleasing 10,000 square feet of the park to a new tenant. The lease is for a five year period and began in April 2013. In May 2014, we signed a two year lease with a new tenant for 4,000 square feet.

Rental expenses for the industrial park increased $36,000 from $119,000 for the year ended February 28, 2013 to $155,000 for the year ended February 28, 2014. During the year ended February 28, 2014, utilities and landscaping increased $6,000 and snow removal increased $3,000. These increases are due to the harsh winter we experienced in the statementsnorth east and utility rate increases. Property taxes increased $3,000, repairs and maintenance increased $5,000 and miscellaneous expenses increased $3,000.

In addition to the increase in operating expenses, we had a $15,000 expense due to the write-off of operations was replaced by rental operations expenseimpaired asset costs which were related to the original financing we obtained when we purchased the industrial park. The costs were considered to be impaired as detaileda result of the refinancing of the industrial park that took place in the preceding table. The rental income detailed in the table on the preceding page is included in the net sales amount on the statements of operations on page 32.December 2013.

For the years ended February 28, 2014 and 2013, net cash outflows related to the industrial park were $208,000 and $181,000, respectively. These cash outflows are net of rental income and depreciation expense and include the principal payments on the industrial park’s mortgage and additional capitalized costs related to the refinancing of the parks mortgage. Prior to purchasing the industrial park in December 2010, we had rental expense of approximately $142,000. If we are able to lease additional vacant space, it will provide a positive cash flow for the park when compared to our prior rental payments.

Interest Income, Interest Expense and Income Taxes:

Interest income increased to $6,000 for the year ended February 29, 2012 as compared to $2,000$7,000 for the year ended February 28, 2011.2014 when compared to $5,000 for the year ended February 28, 2013. Our present investment policy is to invest excess cash in short term cash equivalents with an S & P rating ofhighly liquid mutual funds. Our holdings are rated at least A1+.or above investment grade.

Interest expense increaseddecreased to $118,000 for the year ended February 29, 2012 as compared to $8,000$110,000 for the year ended February 28, 2011. The increase in interest expense is due to the outstanding note payable we have for the acquisition of the Sono-Tek Industrial Park.

We recorded an income tax benefit of $291,000 for the year ended February 29, 20122014 as compared to an expense of $14,500$114,000 for the year ended February 28, 2011.2013.

We recorded income tax expense of $130,000 for the year ended February 28, 2014 as compared to a benefit of $74,000 for the year ended February 28, 2013. As of February 29, 2012,28, 2014, we have no net operating loss deductions available to carryforward. The details of the current yearsyear’s tax benefit are explained in Note 1112 in our financial statements.

For the year ended February 29, 2012,28, 2014, we had net income of $1,432,000$484,000 as compared to $594,000$132,000 for the year ended February 28, 2011.2013. The improvementincrease in our net income is due to an increase in our sales an improved gross profit marginvolume combined with a decrease in our operating expenses.

For the years ended February 28, 2014 and an2013, we do not believe that our sales revenue or net income tax benefit.has been adversely affected by the impact of inflation or changing prices.

Off - Balance Sheet Arrangements

We do not have any Off - Balance Sheet Arrangements as of February 29, 2012.28, 2014.

Critical Accounting Policies

The discussion and analysis of the Company’s financial condition and results of operations are based upon the Company’s consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires the Company to make estimates and judgments that affect the reported amount of assets and liabilities, revenues and expenses, and related disclosure on contingent assets and liabilities at the date of the financial statements. Actual results may differ from these estimates under different assumptions and conditions.

Critical accounting policies are defined as those that are reflective of significant judgments and uncertainties, and may potentially result in materially different results under different assumptions and conditions. As of February 29, 2012,28, 2014, management believes there are no critical accounting policies applicable to the Company that are reflective of significant judgments and or uncertainties.

Stock-Based Compensation

The computation of the expense associated with stock-based compensation requires the use of a valuation model. ASC 718 is a complex accounting standard, the application of which requires significant judgment and the use of estimates, particularly surrounding Black-Scholes assumptions such as stock price volatility, expected option lives, and expected option forfeiture rates, to value equity-based compensation. We currently use a Black-Scholes option pricing model to calculate the fair value of stock options. We primarily use historical data to determine the assumptions to be used in the Black-Scholes model and have no reason to believe that future data is likely to differ materially from historical data. However, changes in the assumptions to reflect future stock price volatility and future stock award exercise experience could result in a change in the assumptions used to value awards in the future and may result in a material change to the fair value calculation of stock-based awards. ASC 718 requires the recognition of the fair value of stock compensation in net income. Although every effort is made to ensure the accuracy of our estimates and assumptions, significant unanticipated changes in those estimates, interpretations and assumptions may result in recording stock option expense that may materially impact our financial statements for each respective reporting period.

Impact of New Accounting Pronouncements

In May 2011, the Financial Accounting Standards Board (“FASB”) amended its guidance related to Fair Value Measurement: Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. generally accepted accounting principles (“U.S. GAAP”) and the International Financial Reporting Standards (“IFRS”), that results in a consistent definition of fair value and common requirements for measurement of and disclosure about fair value. The new guidance clarifies and changes some fair value measurement principles and disclosure requirements under U.S. GAAP. Among them is the clarification that the concepts of highest and best use and valuation premise in a fair value measurement should only be applied when measuring the fair value of nonfinancial assets. Additionally, the new guidance requires quantitative information about unobservable inputs, and disclosure of the valuation processes used and narrative descriptions with regard to fair value measurements within the Level 3 categorization of the fair value hierarchy. The requirements of the amended accounting guidance are effective for us March 1, 2012 and early adoption is prohibited. The adoption of the new accounting guidance is not expected to have a material impact on our consolidated financial statements.

All other accounting pronouncements issued but not yet effective have been deemed to be not applicable or the adoption of such accounting pronouncement is not expected to have a material impact on the financials.

ITEM 7A   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK – Not Required for Smaller Reporting Companies.

ITEM 8   FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Our financial statements are presented on pages 2932 to 4548 of this Report.

ITEM 9CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE – None.

ITEM 9ACONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Act”)) as of the end of the period covered by this annual report on Form 10-K.  Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that these disclosure controls and procedures were effective as of such date, at a reasonable level of assurance, in ensuring that the information required to be disclosed by us in the reports we file or submit under the Act is (i) accumulated and communicated to our management (including the Chief Executive Officer and Chief Financial Officer) in a timely manner, and (ii) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms.

Internal Control Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f). Under the supervision and with the participation of our management, including our Chairman & CEO (principal executive officer) and Chief Financial Officer (principal accounting officer), we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the criteria in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation, management has concluded that our internal control over financial reporting was effective as of February 29, 2012.28, 2014. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risks that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Changes in Internal Control Over Financial Reporting

There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended) that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B   OTHER INFORMATION - None.

PART III

ITEM 10   DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

(a)Identification of Directors

* Member of the Audit Committee.

The Board of Directors is divided into two classes. The directors in each class serve for a term of two years. The terms of the classes are staggered so that only one class of directors is elected at each annual meeting of the Company. The terms of Dr. Mowbray and Messrs. Handler, Haskell and Schwartz run until the annual meeting to be held in 2012.2014. The terms of Drs. Coccio and Riemer and Mr.Messrs. Strasburg and Harshbarger run until the annual meeting to be held in 2013,2015, and in each case until their respective successors are duly elected and qualified.

Audit Committee

The Company’s Board of Directors has an Audit Committee composed of Edward J. Handler, Eric Haskell, CPA and Philip A. Strasburg, CPA, as Chairman of the Audit Committee. The “audit committee financial expert” designated by the Board is Philip A. Strasburg. The Company considers Mr. Strasburg to be an “independent director”.

The Audit Committee is responsible for (i) selecting an independent public accountant for ratification by the stockholders, (ii) reviewing material accounting items affecting the consolidated financial statements of the Company, and (iii) reporting its findings to the Board of Directors.

Nominating Committee

There have been no changes to the procedures by which shareholders may recommend nominees to the Board of Directors.

(b)  Identification of Executive Officers

The foregoing officers are electedappointed for terms of one year or until their successors are duly elected and qualified or until terminated by the action of the Board of Directors. There are no arrangements or understandings between any executive officer and any other persons(s) pursuant to which he was or is to be selected as an officer.

Business Experience

STEPHEN J. BAGLEY, CPA was appointed Chief Financial Officer in June 2005. From 1987 to 1991 he worked in public accounting in various capacities. From 1992 to 2005, he held various leadership positions as Controller, Chief Financial Officer and Vice President of Finance for companies with up to $45,000,000 in revenues. Mr. Bagley earned a Bachelor of Science degree from The State University of NY – College at Oneonta and an MBA from Marist College. He was licensed as a CPA in 1990. Mr. Bagley is a TrusteePresident of the Board of Education for the New Paltz Central School District and a MemberChairman of the Audit and Finance Committee for the District.

DR. CHRISTOPHER L. COCCIO was appointed President and Chief Executive Officer of Sono-Tek on April 30, 2001, has been a Director of the Company since June 1998, and was appointed Chairman in August 2007. From 1964 to 1996, he held various engineering, sales, marketing and management positions at General Electric Company, with P&L responsibilities for up to $100 million in sales and 500 people throughout the United States. He also won an ASME Congressional Fellowship and served with the Senate Energy Committee in 1976. His business experience includes both domestic and international markets and customers. He founded a management consulting business in 1996, and was appointed a legislative Fellow on the New York State Assembly’s Legislative Commission on Science and Technology from 1996 to 1998. From 1998 to 2001, he worked with Accumetrics Associates, Inc., a manufacturer of digital wireless telemetry systems, as Vice President of Business Development and member of the Board of Advisors. Dr. Coccio received a B.S.M.E. from Stevens Institute of Technology, an M.S.M.E. from the University of Colorado, and a Ph.D. from Rensselaer Polytechnic Institute in Chemical Engineering.

Key attributes, Experience and Skills:Dr. Coccio brings his strategicvision for our Company to the Board together with his leadership, business experience and investor relations skills. Dr. Coccio has an immense knowledge of our Company and its related applications which is beneficial to the Board. Dr. Coccio’s service as Chairman and CEO bridges a critical gap between the Company’s management and the Board, enabling the Board to benefit from management’s perspective on the Company’s business while the Board performs its oversight function.

ROBB W. ENGLEjoined Sono-Tek in 2000 as a Field Service Technician. Mr. Engle created the Sono-Tek Service Department and led the development of key products in his leadership role of our engineering resources. As Vice President of Engineering, he directs the engineering department, service department, IT and Sono-Tek laboratory services. Mr. Engle was formally trained and certified by the U.S. Navy as a Nuclear Operator where he was recognized with an induction into the Navy League Memorial for meritorious service and the advancement of training techniques. He also served with honors on board a submarine and earned the prestigious Sub-Surface Warfare (E) Insignia.

EDWARD J. HANDLER, III, Esq., is a retired partner from Kenyon & Kenyon, a law firm that provided intellectual property advice to the Company. Mr. Handler became a Director of the Company on October 1, 2004, coincident with his retirement from his law firm. Mr. Handler has 40 years of experience in all aspects of intellectual property, including patents, trade secrets, trademarks and copyrights, including litigation and other adversarial proceedings. Mr. Handler is Chairman and CEO of The Bronx Project, Inc., a private Delaware corporation active in the area of therapeutics for acute (CNS) inflammatory conditions. Mr. Handler is past President of the West Point Society of New York and a past Trustee of the Association of Graduates, U.S. Military Academy. He holds a J.D. degree from the University of Virginia Law School and a B.S. in Engineering Science from the United States Military Academy.

Key attributes, Experience and Skills: Mr. Handler’s extensive experience as an attorney enables him to bring valuable strategic insights to the Board. Mr. Handler’s past experience as the Company’s intellectual property attorney provides him with an in depth knowledge of the Company and its related market applications. Mr. Handler also brings leadership and oversight experience to the Board.

R. STEPHEN HARSHBARGERjoined Sono-Tek in 1993. He was appointed President of the Company in 19932012. As President, he directs our Sales, Marketing, Engineering, Service, and was appointed Executive Vice President in August 2011.Manufacturing Operations. Prior to assuming his present position, heMr. Harshbarger served as Sales Engineer, World Wide Sales and Marketing Manager, VP Sales & Marketing, VPVice President & Director of Electronics and Advanced Energy (E&AE). and Executive Vice President. In his years managing the last four years serving as Director E&AEsales organization, he has increasedestablished a worldwide distribution and representative network in more than 40 countries consisting of more than 300 persons, with revenue growth of greater than 300%. He has 17over 18 years of experience in ultrasonic coating equipment for the electronics, medical device and advanced energy industries. Prior to joining Sono-Tek, Mr. Harshbarger was the Sales and Marketing Manager for Plasmaco Inc., a world leader in the development of flat panel displays. In that position, he established their distribution network, participated in venture capital funding, and introduced the first flat panel technology to Wall Street trading floors.  He is a graduate of Bentley University, with a major in Finance and a minor in Marketing.

ERIC HASKELL, CPA has been a Director since August 2009. He has over 30 years of experience in senior financial positions at several public and private companies.  He has significant expertise in the areas of acquisitions and divestitures, strategic planning and investor relations.  From December 2005 through March 2008, Mr. Haskell served as the Executive Vice President and Chief Financial Officer of SunCom Wireless Holdings, Inc., a company providing digital wireless communications services which was publicly traded until its merger with a wholly-owned subsidiary of T-Mobile USA, Inc. in February 2008.  He also served as a member of SunCom’s Board of Directors from November 2003 through May 2007.  From 1989 until April 2004, Mr. Haskell served as the Chief Financial Officer of Systems & Computer Technology Corp., a NASDAQ listed software and services corporation.  Mr. Haskell received his Bachelors Degree in Business Administration from Adelphi University in 1969.

Key attributes, Experience and Skills: Mr. Haskell’s training and extensive experience in financial management at both public and private companies provide the Board with valuable insights. Mr. Haskell’s significant experience in acquisitions and divestitures and investor relations bring strategic judgementjudgment and experience to the Board. Mr. Haskell’s strong operational and business background complement his accounting and finance experience and are valuable resources to the Board as it exercises its oversight duties and support of the Company’s growth strategies.

DR. DONALD F. MOWBRAY has been a Director since August 2003. He has been an independent consultant since August 1997. From September 1992 to August 1997, he was the Manager of the General Electric Company’s Corporate Research and Development Mechanical Engineering Laboratory. From 1962 to 1992 he worked for the General Electric Company in a variety of engineering and managerial positions. Dr. Mowbray received a B.S. in Aeronautical Engineering from the University of Minnesota in 1960, a Master of Science in Engineering Mechanics from the University of Minnesota in 1962 and a Ph.D. from Rensselaer Polytechnic Institute in Engineering Mechanics in 1968.

Key attributes, Experience and Skills: Dr. Mowbray’s extensive research and managerial experience enables him to bring valuable insights to the Board. His knowledge of the Company’s products and the materials sciences technology underlying them has enabled him to contribute to our advanced products development and designs. Dr. Mowbray also brings leadership and oversight experience to the Board from his GE management background.

DR. JOSEPH RIEMER joined the Company in January 2007 as Vice President of Engineering, becameand has been a Director insince August 2007. Dr. Riemer served as President from September 2007 and was appointeduntil August 2012 when he became Vice President in September 2007.of Food Business Development. Dr. Riemer holds a Ph.D. in Food Science and Technology from the Massachusetts Institute of Technology (MIT), focusing on food technology, food chemistry, biochemical analysis, and food microbiology. His experience includes seven years with Pfizer in its Adams Confectionary Division, where he was Director, Global Operations Development. Dr. Riemer has also held leading positions with several food, food ingredients, and personal care products companies. He has served in the capacities of research and development, operations, and general management. Prior to joining the Company, he was a management consultant serving clients in the food, biotech and pharmaceutical industries.

Key attributes, Experience and Skills: Dr. Riemer’s extensive research and management experience enables him to bring valuable insights to the Board. His extensive experience in the biotech, food and pharmaceutical industries bring specific product application insights to the Board. Dr. Riemer’s service as Vice President of Food Business Development helps to bridgeprovide focus to the gap between the Company’s management and the Board.Board on this important marketing area. Dr. Riemer also brings leadership and oversight experience to the Board.

SAMUEL SCHWARTZ has been a Director of the Company since August 1987, and was Chairman of the Board from February 1993 to May 1999 and August 2001 to August 2007. From 1959 to 1992, he was the Chairman and Chief Executive Officer of Krystinel Corporation, a manufacturer of ceramic magnetic components used in electronic circuitry. He received a B.Ch.E. from Rensselaer Polytechnic Institute in 1941 and an M.Ch.E. from New York University in 1948.

Key attributes, Experience and Skills: Mr. Schwartz’s long-time experience as a businessman and manufacturer enables him to bring valuable operational insights to the Board. Mr. Schwartz’s experience as former Chairman of the Board enable him to bring operational insights to the Board. Mr. Schwartz also brings leadership and oversight experience to the Board.

PHILIP STRASBURG, CPA, has been a Director since August 2004. He is a retired partner from the firm of Anchin Block and Anchin, LLP and has 40 years of experience in auditing. He served as Audit Committee Chairman from August 2004 until February 2005, when he was elected Treasurer. Mr. Strasburg was reappointed Audit Committee chairman in May 2005 concurrent with his resignation as Treasurer. He was the lead partner on the Sono-Tek account from Fiscal 1994 to Fiscal 1996. Mr. Strasburg is a certified public accountant in New York State. He has a Master of Science in economics from The London School of Economics and Political Science and a Bachelors of Science degree from Lehigh University, where he majored in business administration.

Key attributes, Experience and Skills: Mr. Strasburg’s training and extensive experience in auditing provide the Board with valuable insights and skills necessary to lead the Audit Committee. Mr. Strasburg’s strong operational and business background complement his accounting and finance experience, and are valuable resources to the Board as it exercises its oversight duties and support of the Company’s growth strategies.

(b)Identification of Certain Significant Employees

Not applicable.

(c)Family Relationships

None.

(d)Involvement in certain legal proceedings

None.

Section 16(a) Beneficial Ownership Reporting Compliance

Section 16(a) of the Securities Exchange Act of 1934 requires the Company's Directors, executive officers and persons who own more than ten percent of the Company's common stock to file with the Securities and Exchange Commission initial reports of beneficial ownership and reports of changes of beneficial ownership of common stock.  Such persons are also required by Securities and Exchange Commission regulations to furnish the Company with copies of all such reports.  Based solely on a review of such filings, during the year ended February 29, 2012,28, 2014, all of the Company's Directors and executive officers and holders of more than ten percent of the Company’s stock have made timely filings of such reports, except for one late report by Dr. Riemer and one late report by Stephen J. Bagley.reports.

Code of Ethics

The Company has adopted a Code of Ethics for senior executives and financial officers. The Board intends that this Code satisfy the requirements of the Securities and Exchange Commission rules for a Code of Ethics that applies to senior management. A copy of the Company's Code of Ethics is posted on the "information for investors" web page located athttp://www.sono-tek.com/code-of-ethics/ and is available in print to any shareholder who requests a copy.

ITEM 11   EXECUTIVE COMPENSATION

The following table sets forth the aggregate remuneration paid or accrued by the Company for the Fiscal Years ended February 29, 201228, 2014 and February 28, 20112013 for each named officer of the Company.

Summary Compensation Table

All Other Compensation represents Company contributions to the Company’s 401K plan.

Option awards in the above table are calculated using the Black-Scholes options pricing model which is further discussed in Note 4 – Stock Based Compensation, in the Company’s financial statements.

Officer Compensation Arrangements

During the year ended February 29, 2012,28, 2014, Dr. Coccio was compensated at a rate of $225,000 per annum.

During the year ended February 29, 2012, Dr. Riemer28, 2014, Mr. Harshbarger was compensated at a rate of $170,000$200,000 per annum.

During the year ended February 28, 2014, Mr. Harshbarger isBagley was compensated at a rate of $75,000$140,000 per annum plus a commission on sales that his business unit originates.annum.

Outstanding Equity Awards At Fiscal Year End

¹162,298 options will vest on November 8, 2014.

²20,834 options will vest on November 8, 2014 and 10,000 options will vest on November 8, 2015.

³16,200 options will vest on 02/20/2015, 12,600 options will vest on 02/20/2016 and 7,200 options will vest on 02/20/2017.

⁴16,286 options will vest on November 8, 2014.

⁵3,500 options will vest January 24, 2015 and 2,000 options will vest January 24, 2016.

Estimated Payments and Benefits Upon Termination or Change in Control

On September 1, 2007, the Company entered into identical Executive Agreements with Stephen J. Bagley, Chief Financial Officer and Christopher L. Coccio, Chief Executive Officer and Joseph Riemer, President.Officer. The Company also entered into an Executive Agreement with R. Stephen Harshbarger, Executive Vice President, on March 5, 2008, which was subsequently amended on March 8, 2012. In the event of a change of control of the Company followed by a termination of the executives’ employment under certain circumstances, the Executive Agreements provide for severance payments to each officer equal to one year of the executive’s annual base, commissions and bonus compensation paid by the Company for the previous calendar year.

Based on last year’s salary arrangements, if the rights of the foregoing officers were to be triggered following a change of control, they would be entitled to the following payments from the Company: Stephen J. Bagley $123,000,$146,000, Christopher L. Coccio $219,000,$214,000 and R. Stephen Harshbarger $195,000 and Joseph Riemer $155,000.$208,000.

Compensation of Directors

Prior to April 2011, eachEach non-employee director received $500 for each meeting attended. Effective April 2011, each non-employee director receivedreceives $1,000 for each meeting attended. Directors who are employees of the Company receive no additional compensation for serving as directors. For the year ended February 29, 2012,28, 2014, director compensation was as follows:

20122014 Director Compensation

Option awards in the above table are calculated using the Black-Scholes options pricing model which is further discussed in Note 4 – Stock Based Compensation, in the Company’s financial statements.

The number of vested and unvested stock options held by non-employee directors as of February 29, 2012 was as follows:

ITEM 12SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The following information is furnished as of April 27, 201229, 2014 to indicate beneficial ownership of the Company's Common Stock by each Director, by each named executive officer, who has a salary and bonus in excess of $100,000, by all Directors and executive officers as a group, and by each person known to the Company to be the beneficial owner of more than 5% of the Company's outstanding Common Stock. Such information has been furnished to the Company by the indicated owners. Unless otherwise indicated, the named person has sole voting and investment power.

The above ownership percentages are based on 14,455,44414,508,507 shares outstanding as of April 27, 2012.29, 2014.

*c/o Sono-Tek Corporation, 2012 Route 9W, Milton, NY 12547.

** Less than 1%

¹ Includes 2,000 shares in the name of Dr. Coccio’s wife and 486,893102,314 options currently exercisable issued under the Company’s Stock Incentive Plans.

² Includes 61,579 shares owned jointly with Mr. Handler’s wife, 35,929 shares in the name of Mr. Handler’s wife and 30,00019,800 options currently exercisable issued under the Company’s Stock Incentive Plans.

³Represents 10,000Includes 13,200 options currently exercisable issued under the Company’s Stock Incentive Plans.

⁴Includes 40,0004,500 options currently exercisable issued under the Company’s Stock Incentive Plans.

⁵Includes 198,00019,800 options currently exercisable issued under the Company’s Stock Incentive Plans.

⁶Includes 50,00010,000 shares in the name of Mr. Strasburg’s wife and 26,400 options currently exercisable issued under the Company’s Stock Incentive Plans.

⁷Includes 40,000 options currently exercisable issued under the Company’s Stock Incentive Plans.

⁸ The group total includes 914,043238,214 options currently exercisable issued under the Company’s Stock Incentive Plans. The group total includes 1,1001,500 shares and 49,15039,000 exercisable options held by Mr. Bagley.Robb Engle .

Securities Authorized for Issuance Under Equity Compensation Plans:

EQUITY COMPENSATION PLAN INFORMATION

Description of Equity Compensation Plans:

19932013 Stock Incentive Plan

Under the 19932013 Stock Incentive Plan, as amended ("19932013 Plan"), options have beencan be granted to officers, directors, consultants and employees of the Company and its subsidiaries to purchase up to 2,500,000 shares of the Company's common shares. Options grantedstock. Under the 2013 Plan options expire ten years after the date of grant. As of February 28, 2014, there were 135,500 options outstanding under the 1993 Plan expire on various dates through 2013. There can be no further grants under the 1993 Plan.2013 plan.

Under the 19932013 Stock Incentive Plan, option prices weremust be at least 100% of the fair market value of the common stock at time of grant. For qualified employees, except under certain circumstances specified in the 1993 plan or unless otherwise specified at the discretion of the Board of Directors, no option may be exercised prior to one year after date of grant, with the balance becoming exercisable in cumulative installments over a three year period during the term of the option.option, and terminating at a stipulated period of time after an employee's termination of employment.

2003 Stock Incentive Plan

Under the 2003 Stock Incentive Plan, as amended ("2003 Plan"), until May 2013, options canwere available to be granted to officers, directors, consultants and employees of the Company and its subsidiaries to purchase up to 1,500,000 of the Company's common stock.shares. As of February 28, 2014, there were 811,073 options outstanding under the 2003 Plan, under which no additional options may be granted.

The 2003 Plan supplemented and replaced the 1993 Plan. Under the 2003 Stock Incentive Plan, option prices must be at least 100% of the fair market value of the common stock at time of grant. For qualified employees, except under certain circumstances specified in the 2003 plan or unless otherwise specified at the discretion of the Board of Directors, no option may be exercised prior to one year after date of grant, with the balance becoming exercisable in cumulative installments over a three year period during the term of the option.

ITEM 13  CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

Transactions With Related Persons – None

Independence of Directors

The Company’s Board of Directors is comprised of five “independent directors”, as that term is defined under NASDAQ rules, and two directors who are not “independent directors”. The Company’s “independent directors” are Samuel Schwartz, Donald Mowbray, Edward Handler, Eric Haskell and Philip Strasburg. Christopher Coccio and Joseph Riemer are employees of the Company and are therefore not independent.

ITEM 14  PRINCIPAL ACCOUNTING FEES AND SERVICES

Audit Fees

For the Fiscal Yearsfiscal year ended February 29, 2012 and February 28, 2011,2014, the Company paid or accrued fees of approximately $46,500 and $44,500 for services rendered by SherbLiggett, Vogt & Co.Webb, P.A., LLP,its independent auditors. These fees included audit and review services.

For the fiscal year ended February 28, 2013, the Company paid or accrued fees of approximately $46,000 for services rendered by Liggett, Vogt & Webb, P.A., its independent auditors. These fees included audit and review services.

Audit Related Fees - None

Tax Fees

For the Fiscal Yearsyear fiscal year ended February 29, 2012 and February 28, 2011,2014, the Company paid or accrued tax preparation fees of approximately $17,000 and $8,000$5,500 for services rendered by SherbLiggett, Vogt & Co.Webb, P.A., LLP, its independent auditors. The increase in tax fees for

For the year fiscal year ended February 29, 2012 was due to28, 2013, the Company paid or accrued tax preparation fees of amended New York State returns related to Qualified Emerging Technology Credits.approximately $5,500 for services rendered by Liggett, Vogt & Webb, P.A., its independent auditors.

All Other Fees – None

Pre-Approval Policies and Procedures

The Audit Committee’s current policy is to pre-approve all audit and non-audit services that are to be performed and fees to be charged by our independent auditor to assure that the provision of these services does not impair the independence of the auditor. The Audit Committee pre-approved all audit and non-audit services rendered by our principal accountantaccountants in 20122014 and 2011.2013.

PART IV

ITEM 15  EXHIBITS

SONO-TEK CORPORATION

FORM 10-K

ITEM 7

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND SCHEDULES

FOR THE YEARS ENDED FEBRUARY 29, 201228, 2014 and FEBRUARY 28, 20112013

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

CONSOLIDATED FINANCIAL STATEMENTS:

Consolidated Balance Sheets at February 29, 201228, 2014 and February 28, 20112013

Consolidated Statements of Operations

For the Years Ended February 29, 201228, 2014 and February 28, 20112013

Consolidated Statements of Stockholders' Equity

For the Years Ended February 29, 201228, 2014 and February 28, 20112013

Consolidated Statements of Cash Flows

For the Years Ended February 29, 201228, 2014 and February 28, 20112013

Notes to the Consolidated Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRMReport of Independent Registered Public Accounting Firm

To the Stockholders and Board of Directors and Stockholders

Sono-Tek Corporation

Milton, New York

We have audited the accompanying consolidated balance sheets of Sono-Tek Corporation as of February 29, 201228, 2014 and February 28, 2011,2013 and the related consolidated statements of operations, stockholders’ equity, and cash flows for each of the years ended February 29, 2012 and February 28, 2011.then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.audit.

We conducted our auditsaudit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the auditsaudit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provideaudit provides a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Sono-Tek Corporation,the Company as of February 29, 201228, 2014 and February 28, 20112013, and the results of their operationits operations and their cash flows for each of the years then ended, February 29, 2012 and February 28, 2011 in conformity with generally accepted accounting principles generally accepted in the United States.

/s/ Liggett, Vogt & Webb, P.A.

/S/ SHERBLIGGETT, VOGT & CO., LLPWEBB, P.A.

Certified Public Accountants

New York, New York

May 9, 201223, 2014

SONO-TEK CORPORATION

CONSOLIDATED BALANCE SHEETS

See notes to consolidated financial statements.

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONSBALANCE SHEETS

See notes to consolidated financial statements.

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

YEARS ENDED FEBRUARY 29, 2012 AND FEBRUARY 28, 2011OPERATIONS

See notes to consolidated financial statements.

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWSSTOCKHOLDERS’ EQUITY

YEARS ENDED FEBRUARY 28, 2014 AND 2013

See notes to consolidated financial statements.

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

See notes to consolidated financial statements. 

SONO-TEK CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

YEARS ENDED FEBRUARY 29, 201228, 2014 AND FEBRUARY 28, 20112013

NOTE 1: BUSINESS DESCRIPTION

The Company was incorporated in New York on March 21, 1975 for the purpose of engaging in the development, manufacture, and sale of ultrasonic liquid atomizing nozzles, which are sold world-wide. Ultrasonic nozzle systems atomize low to medium viscosity liquids by converting electrical energy into mechanical motion in the form of high frequency ultrasonic vibrations that break liquids into minute drops that can be applied to surfaces at low velocity.

Based on its core technology of ultrasonic liquid atomizing nozzles, the Company has developed intellectual property in the area of precision spray coating of liquids. The Company is presently engaged in the development, manufacture, sales, installation and servicing of diverse ultrasonic coating equipment for various manufacturing industries worldwide.

NOTE 2: SIGNIFICANT ACCOUNTING POLICIES

Consolidation- The accompanying consolidated financial statements of Sono-Tek Corporation, a New York corporation (the “Company”), include the accounts of the Company and its wholly owned subsidiaries, Sono-Tek Cleaning Systems Inc. and Sono-Tek Industrial Park, LLC. Sono-Tek Cleaning Systems, Inc., a New Jersey Corporation (“SCS”), ceased operations during the Fiscal Year Ended February 28, 2002. Sono-Tek Industrial Park, LLC (“SIP”), operates as a real estate holding company for the Company’s real estate operations and started operating in December 2010.operations.

Reclassifications – Where appropriate, prior year’s financial statements reflect reclassifications to conform to the current year’s presentation.

Cash and Cash Equivalents -Cash and cash equivalents consist of money market mutual funds, short term commercial paper and short-term certificates of deposit with original maturities of 90 days or less.

Supplemental Cash Flow Disclosure-

Inventories -Inventories are stated at the lower of cost or market. Cost is determined using the first-in, first-out (FIFO) method for raw materials, subassemblies and work-in-progress and the specific identification method for finished goods.

Allowance for doubtful accounts -The Company records a bad debt expense/allowance based on management’s estimate of uncollectible accounts. All outstanding accounts receivable accounts are reviewed for collectability on an individual basis. The bad debt expense recorded for the years ended February 29, 201228, 2014 and February 28, 20112013 was $0$12,000 and $10,000,$9,620, respectively.

Equipment, Furnishings and Leasehold Improvements – Equipment, furnishings and leasehold improvements are stated at cost. Depreciation of equipment and furnishings is computed by use of the straight-line method based on the estimated useful lives of the assets, which range from three to five years.

Land and Buildings –Land and buildings are stated at cost. Buildings are being depreciated by use of the straight-line method based on an estimated useful life of forty years.

Product Warranty - Expected future product warranty expense is recorded when the product is sold.

Intangible Assets -Includecosts of patent applications which are deferred and charged to operations over seventeen years for domestic patents and twelve years for foreign patents and the unamortized portion of deferred financing costs.patents. The accumulated amortization of patents is $85,983$105,585 and $78,058$95,634 at February 29, 201228, 2014 and February 28, 2011,2013, respectively. Annual amortization expense of such intangible assets is expected to be $7,900$9,600 per year for the next five years.

Research and Product Development Expenses -Research and product development expenses represent engineering and other expenditures incurred for developing new products, for refining the Company's existing products and for developing systems to meet unique customer specifications for potential orders or for new industry applications and are expensed as incurred.

Income Taxes- The Company accounts for income taxes under the asset and liability method. Under this method, deferred income taxes are recognized for the tax consequences of "temporary differences" by applying enacted statutory tax rates applicable to future years to differences between the financial statement carrying amounts and the tax basis of existing assets and liabilities. If it is more likely than not that some portion or all of a deferred tax asset will not be realized, a valuation allowance is recognized.

Earnings Per Share -Basic earnings per share (“EPS”) is computed by dividing net income by the weighted-average number of common shares outstanding for the period. Diluted EPS reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock.

Shipping and Handling Costs –Shipping and handling costs are included in cost of sales in the accompanying consolidated statements of operations.

Advertising Expenses -The Company expenses the cost of advertising in the period in which the advertising takes place. Advertising expense for the years ended February 29, 201228, 2014 and February 28, 20112013 was $248,798$234,798 and $206,271,$218,279, respectively.

Long-Lived Assets -The Company periodically evaluates the carrying value of long-lived assets, including intangible assets, when events and circumstances warrant such a review. The carrying value of a long-lived asset is considered impaired when the anticipated undiscounted cash flow from such asset is separately identifiable and is less than its carrying value. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair market value of the long-lived asset. Fair market value is determined primarily using the anticipated cash flows discounted at a rate commensurate with the risk involved.

Recognition of Revenue – Sales are recorded at the time title passes to the customer, which, based on shipping terms, generally occurs when the product is shipped to the customer. Based on prior experience, the Company reasonably estimates its sales returns and warranty reserves. Sales are presented net of discounts and allowances. Discounts and allowances are determined when a sale is negotiated. The Company does not grant its customers or independent representatives the ability to return equipment nor does it grant price adjustments after a sale is complete.

Concentration of Credit Risk -The Company does not believe that it is subject to any unusual or significant risks, in the normal course of business. The Company had one customer, which accounted for 6.7%10% of sales during the year ended February 29, 2012.28, 2014. Three customers accounted for 26.6%27% of the outstanding accounts receivables at February 29, 2012.28, 2014.

Fair Value of Financial Instruments - Effective June 1, 2008, theThe Company adoptedfollows the guidance in the Fair“Fair Value Measurements and Disclosure TopicTopic” of the Accounting Standards Codification for assets and liabilities measured at fair value on a recurring basis. This guidance establishes a common definition for fair value to be applied to existing generally accepted accounting principles that require the use of fair value measurements, establishes a framework for measuring fair value and expands disclosure about such fair value measurements. The adoption of this guidance did not have an impact on the Company’s financial position or operating results, but did expand certain disclosures. The guidance defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Additionally, the guidance requires the use of valuation techniques that maximize the use of observable inputs and minimize the use of unobservable inputs. These inputs are prioritized below:

Level 1: Quoted prices in active markets.

Level 2: Observable market-based inputs or unobservable inputs that are corroborated by market data.

Level 3: Unobservable inputs for which there is little or no market data, which require the use of the reporting entity’s own assumptions.

The fair values of financial assets of the Company were determined using the following categories at February 29, 2012:28, 2014 and 2013, respectively:

Marketable Securities include mutual funds of $253,987,$630,794, that are considered to be highly liquid and easily tradeable as of February 29, 2012.28, 2014. These securities are valued using inputs observable in active markets for identical securities and are therefore classified as Level 1 within the Company’s fair value hierarchy.

In addition, the guidance of the Fair Value Option for Financial Assets and Financial Liabilities Topic of the Codification was effective for June 1, 2008. The guidance expands opportunities to use fair value measurements in financial reporting and permits entities to choose to measure many financial instruments and certain other items at fair value.

Management Estimates -The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

New Accounting Pronouncements-

In May 2011, the Financial Accounting Standards Board (“FASB”) amended its guidance related to Fair Value Measurement: Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. generally accepted accounting principles (“U.S. GAAP”) and the International Financial Reporting Standards (“IFRS”), that results in a consistent definition of fair value and common requirements for measurement of and disclosure about fair value. TheAll new guidance clarifies and changes some fair value measurement principles and disclosure requirements under U.S. GAAP. Among them is the clarification that the concepts of highest and best use and valuation premise in a fair value measurement should only be applied when measuring the fair value of nonfinancial asesets. Additionally, the new guidance requires quantitative information about unobservable inputs, and disclosure of the valuation processes used and narrative descriptions with regard to fair value measurements within the Level 3 categorization of the fair value hierarchy. The requirements of the amended accounting guidance are effective for us March 1, 2012 and early adoption is prohibited. The adoption of the new accounting guidance is not expected to have a material impact on our consolidated financial statements.

All other accounting pronouncements issued but not yet effective have been deemed to be not applicable orto the Company. Hence, the adoption of suchthese new accounting pronouncement ispronouncements once effective are not expected to have a materialan impact on the financials.Company.

In July 2013, the FASB issued Accounting Standards Update “ASU” 2013-11 on “Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists”. The amendments in this ASU are to improve the current U.S. GAAP because they are expected to reduce diversity in practice by providing guidance on the presentation of unrecognized tax benefits and will better reflect the manner in which an entity would settle at the reporting date any additional income taxes that would result from the disallowance of a tax position when net operating loss carryforwards, similar tax losses, or tax credit carryforwards exist. The amendments in this Update are effective for fiscal years, and interim periods within those years, beginning after December 15, 2013. For nonpublic entities, the amendments are effective for fiscal years, and interim periods within those years, beginning after December 15, 2014. Early adoption is permitted. The amendments should be applied prospectively to all unrecognized tax benefits that exist at the effective date. Retrospective application is permitted.

NOTE 3: SEGMENT INFORMATION

The Company operates in two segments: ultrasonic spray coating systems, which is the business of developing, manufacturing, selling, installing and servicing ultrasonic spray coating equipment; and real estate operations, which is the business of owning and operating the Sono-Tek Industrial Park.

All inter-company transactions are eliminated in consolidation. For the twelve months ended February 29, 2012,28, 2014 and 2013, segment information is as follows: