UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

For the fiscal year ended April 30, 20142016 or

For the transition period from            to            

Commission file number 0-5286

KEWAUNEE SCIENTIFIC CORPORATION

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (704) 873-7202

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act: (Check one):

Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of shares of voting stock held by non-affiliates of the registrant was approximately $39,915,849$37,653,266 based on the last reported sale price of the registrant’s Common Stock on October 31, 2013,2015, the last business day of the registrant’s most recently completed second fiscal quarter. Only shares beneficially owned by directors of the registrant (excluding shares subject to options) and each person owning more than 10% of the outstanding Common Stock of the registrant were excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. As of July 10, 2014,13, 2016, the registrant had outstanding 2,622,8972,697,628 shares of Common Stock.

DOCUMENTS INCORPORATED BY REFERENCE: Those portions of the Company’s proxy statement for use in connection with Kewaunee Scientific Corporation’s annual meeting of stockholders to be held on August 27, 2014,31, 2016, indicated in this report are incorporated by reference into Part III hereof.

PART I

Item 1. Business

GENERAL

Kewaunee Scientific Corporation was founded in 1906, incorporated in Michigan in 1941, became publicly-held in 1968, and was reincorporated in Delaware in 1970. Our principal business is the design, manufacture, and installation of laboratory, healthcare, and technical furniture products. Laboratory furnitureOur products include both steel, wood, and wood cabinetry,laminate furniture, fume hoods, biological safety cabinets, laminar flow and ductless hoods, adaptable modular and column systems, moveable workstations biological safety cabinets, and carts, epoxy resin worksurfaces, sinks, and sinks. Healthcare furniture products include laminate casework, storage systems,accessories and related products for healthcare applications. Technical furniture products include column systems, slotted-post systems, pedestal systems, and stand-alone benches.design services.

Our products are sold primarily through purchase orders and contracts submitted by customers through our dealers and commissioned agents and a national distributor, as well as through competitive bids submitted by us and our subsidiaries in Singapore, India and China. Products are sold principally to pharmaceutical, biotechnology, industrial, chemical and commercial research laboratories, educational institutions, healthcare institutions, governmental entities, and manufacturing facilities and users of networking furniture.facilities. We consider the markets in which we compete to be highly competitive, with a significant amount of the business involving competitive public bidding.

It is common in the laboratory and healthcare furniture industries for customer orders to require delivery at extended future dates, as products are frequently to be installed in buildings yet to be constructed. Changes or delays in building construction may cause delays in delivery of the orders and our recognition of the sale. Since prices are normally quoted on a firm basis in the industry, we bear the burden of possible increases in labor and material costs between quotation of an order and delivery of the product. The impact of such possible increases is considered when determining the sales price. The principal raw materials and products manufactured by others and used by us in our products are cold-rolled carbon and stainless steel, hardwood lumber and plywood, paint, chemicals, resins, hardware, plumbing and electrical fittings. Such materials and products are purchased from multiple suppliers and are typically readily available.

Our need for working capital and our credit practices are comparable to those of other companies manufacturing, selling and installing similar products in similar markets. Since our products are used in building construction projects, in many cases payments for our products are received over longer periods of time than payments for many other types of manufactured products, thus requiring increased working capital. In addition, payment terms associated with certain projects provide for a retention amount until final completion of the project, thus also increasing required working capital. On average, payments for our products are received during the quarter following shipment, with the exception of the retention amounts which are collected at the final completion of the project.

We hold various patents and patent rights, but do not consider that our success or growth is dependent upon our patents or patent rights. Our business is not dependent upon licenses, franchises, concessions, trademarks, royalty agreements, or labor contracts.

Our business is not generally cyclical, although sales are sometimes lower during our third quarter because of slower construction activity in certain areas of the country during the winter months. Our business is not dependent on any one or a few customers. However, sales to our national stocking distributor represented approximately 9%, 11% and 12% of net sales in each of fiscal years 2014, 2013 and 2012, respectively, and revenue for twothree of the Company’s domestic dealers represented in the aggregate approximately 24%40%, 14%36% and 2%33% of the Company’s total sales in fiscal years 2014, 2013,2016, 2015, and 2012,2014, respectively.

Our order backlog at April 30, 20142016 was $89.0$100.5 million, as compared to $80.2$90.1 million at April 30, 20132015 and $86.2$89.0 million at April 30, 2012.2014. Based on scheduled shipment dates and past experience, we estimate that more than 70 percent80% of our order backlog at April 30, 20142016 will be shipped during fiscal year 2015.2017. However, it may reasonably be expected that delays in shipments will occur because of customer rescheduling or delay in completion of projects which involve the installation of our products.

SEGMENT INFORMATION

See Note 9 of the Notes to Consolidated Financial Statements included in Item 8 of this Annual Report on Form 10-K for information concerning our Domestic and International business segments.

COMPETITION

We consider the industries in which we compete to be highly competitive and believe that the principal competitive factors are price, product performance, and customer service. A significant portion of our business is based upon competitive public bidding.

RESEARCH AND DEVELOPMENT

The amount spent and expensed by us during the fiscal year ended April 30, 20142016 on research and development activities related to new or redesigned products was $842,000.$1,167,000. The amounts spent for similar purposes in the fiscal years ended April 30, 20132015 and 20122014 were $872,000$936,000 and $941,000,$842,000, respectively.

ENVIRONMENTAL COMPLIANCE

In the last three fiscal years, compliance with federal, state, or local provisions enacted or adopted regulating the discharge of materials into the environment has had no material effect on us. There is no material capital expenditure anticipated for such purposes, and accordingly, such regulation is not expected to have a material effect on our earnings or competitive position.

EMPLOYEES

At April 30, 2014, we2016, the Company had 483 domestic and 136 internationalthe following number of full-time employees.employees:

            487 (Domestic); 195 (International).

OTHER INFORMATION

Our Internet address iswww.kewaunee.com. We make available, free of charge through this web site, our annual report to stockholders. Our Form 10-K and 10-Q financial reports may be obtained by stockholders by writing the Secretary of the Company, Kewaunee Scientific Corporation, P.O. Box 1842, Statesville, NC 28687-1842. The public may also obtain information on our reports, proxy, and information statements at the SEC Internet sitewww.sec.gov. The reference to our website does not constitute incorporation by reference of any information contained at that site.

SAFE HARBOR STATEMENT UNDER THE PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995

Certain statements included and referenced in this report, including Management’sManagement��s Discussion and Analysis of Financial Condition and Results of Operations, constitute “forward-looking” statements within the meaning of the Private Securities Litigation Reform Act of 1995 (the “Reform Act”). Such forward-looking statements involve known and unknown risks, uncertainties, and other factors that could significantly impact results or achievements expressed or implied by such forward-looking statements. These factors include, but are not limited to, economic, competitive, governmental and technological factors affecting our operations, markets, products, services and prices, as well as prices for certain raw materials and energy. The cautionary statements made by us pursuant to the Reform Act herein and elsewhere should not be construed as exhaustive. We cannot always predict what factors would cause actual results to differ materially from those indicated by the forward-looking statements. In addition, readers are urged to consider statements that include the terms “believes,” “belief,” “expects,” “plans,” “objectives,” “anticipates,” “intends” or the like to be uncertain and forward-looking.

EXECUTIVE OFFICERS OF THE REGISTRANT

Included in Part III, Item  10(b) of this Annual Report on Form 10-K.

Item 1A. Risk Factors

You should carefully consider the following risks before you decide to buy shares of our common stock. If any of the following risks actually occur, our business, results of operations, or financial condition would likely suffer. In such case, the trading price of our common stock would decline, and you may lose all or part of the money you paid to buy our stock.

This and other public reports may contain forward-looking statements based on current expectations, assumptions, estimates and projections about us and our industry. These forward-looking statements involve risks and uncertainties. Our actual results could differ materially from those forward-looking statements as a result of many factors, including those more fully described below and elsewhere in our public reports. We do not undertake to update publicly any forward-looking statements for any reason, even if new information becomes available or other events occur in the future.

Disruptions in the financial markets have created uncertainty and deteriorating economic conditions may adversely affect our customers and our business.

The financial markets in the United States, Europe and Asia continue to be volatile. The tightening of credit in financial markets, continuation or worsening of the current economic conditions, a prolonged global, national or regional economic recession or other similar events could have a material adverse effect on the demand for our products and on our sales, pricing and profitability. We are unable to predict the likely occurrence or duration of these adverse economic conditions and the impact these events may have on our operations and the laboratory furniture industry in general.

If we fail to compete effectively, our revenue and profit margins could decline.

We face a variety of competition in all of the markets in which we participate. Competitive pricing, including price competition or the introduction of new products, could have material adverse effects on our revenues and profit margins.

Our ability to compete effectively depends to a significant extent on the specification or approval of our products by architects, engineers, and customers. If a significant segment of those communities were to decide that the design, materials, manufacturing, testing, or quality control of our products is inferior to that of any of our competitors, our sales and profits would be materially and adversely affected.

If we lose a large customer, our sales and profits would decline.

We have substantial sales to our national stocking distributor and twothree of our domestic dealers. The combined sales to these three customersdealers accounted for approximately 33%40% of our net sales in fiscal year 2014.2016. Loss of all or a part of our sales to a large customer would have a material effect on our revenues and profits.

An increase in the price of raw materials and energy could negatively affect our sales and profits.

It is common in the laboratory and healthcare furniture industries for customers to require delivery at extended future dates, as products are frequently to be installed in buildings yet to be constructed. Since prices are normally quoted on a firm basis in the industry, we bear the burden of possible increases in labor, material and energy costs between the quotation of an order and the delivery of the products. Our principal raw materials are steel, including stainless steel, wood and epoxy resin. Numerous factors beyond our control, such as general economic conditions, competition, worldwide demand, labor costs, energy costs, and import duties and other trade restrictions, influence prices for our raw materials. We have not always been able, and in the future we might not be able, to increase our product prices in amounts that correspond to increases in costs of raw materials, without materially and adversely affecting our sales and profits. Where we are not able to increase our prices, increases in our raw material costs will adversely affect our profitability.

Our future growth may depend on our ability to penetrate new international markets.

International laws and regulations, construction customs, standards, techniques and methods differ from those in the United States. Significant challenges of conducting business in foreign countries include, among other factors, local acceptance of our products, political instability, currency controls, changes in import and export regulations, changes in tariff and freight rates and fluctuations in foreign exchange rates.

Events outside our control may affect our operating results.

We have little control over the timing of shipping customer orders, as customers’ required delivery dates are subject to change by the customer. Construction delays and customer changes to product designs are among the factors that may delay the start of manufacturing and shipments of orders. Shipments that we anticipate in one quarter may occur in another quarter, affecting both quarters’ results. Weather conditions, such as unseasonably warm, cold, or wet weather, can also affect and sometimes delay projects. Political and economic events can also affect our revenues. When sales do not meet our expectations, our operating results will be reduced for the relevant quarters.

Our principal markets are in the laboratory building construction industry. This industry is subject to significant volatility due to various factors, none of which is within our control. Declines in construction activity or demand for our products could materially and adversely affect our business and financial condition.

We depend on key management and technical personnel, the loss of whom could harm our business.

We depend on certain key management and technical personnel. The loss of one or more key employees may materially and adversely affect us. Our success also depends on our ability to attract and retain additional highly qualified technical, marketing, and management personnel necessary for the maintenance and expansion of our activities. We might not be able to attract or retain such personnel.

Our stock price is likely to be volatile and could drop.

The trading price of our Common Stock could be subject to wide fluctuations in response to quarter-to-quarter variation in operating results, announcement of technological innovations or new products by us or our competitors, general conditions in the construction and construction materials industries, relatively low trading volume in our common stock and other events or factors. In addition, in recent years, the stock market has experienced extreme price fluctuations. This volatility has had a substantial effect on the market prices of securities issued by many companies for reasons unrelated to the operating performance of those companies. Securities market fluctuations may adversely affect the market price of our common stock.

The Patient Protection and Affordable Care Act may increase the cost of providing medical benefits to employees, which could have a significant adverse impact on our results of operations.

We maintain a self-insured healthcare plan for our employees. We have insurance coverage in place for aggregate claims above a specified amount in any year. The Patient Protection and Affordable Care Act, and state legislation in the states in which we operate. may cause the cost of providing medical insurance to our employees to increase. To date, we have not experienced significant costs related to the health care reform legislation; however, it is possible that we may not be able to pass the cost of increased medical costs to our employees or customers.

We are subject to other risks that might also cause our actual results to vary materially from our forecasts, targets, or projections, including:

Item 2. Properties

We own and operate three adjacent manufacturing facilities in Statesville, North Carolina. These facilities also house our corporate offices, as well as sales and marketing, administration, engineering and drafting personnel. These facilities together comprise approximately 413,000 square feet and are located on approximately 20 acres of land. In addition, at April 30, 2014, we leasedlease our primary distribution facility and other warehouse facilities totaling 251,000 square feet in Statesville, North Carolina. We lease sales offices in Naperville, Illinois; Branchburg, New Jersey; Newport, Delaware; Ventura, California; and Singapore. In Bangalore, India we also lease and operate a manufacturing facility comprising 55,000 square feet, a warehouse facility comprising 11,000 square feet and a facility comprising 7,000 square feet that houses sales and administrative offices. In Suzhou, China we also lease and operate a facility totaling 11,000 square feet. We believe our facilities are suitable for their respective uses and are adequate for our current needs.

Item 3. Legal Proceedings

From time to time, we are involved in disputes and litigation relating to claims arising out of our operations in the ordinary course of business. Further, we are periodically subject to government audits and inspections. We believe that any such matters presently pending will not, individually or in the aggregate, have a material adverse effect on our results of operations or financial condition.

Item 4. Mine Safety Disclosures

Not Applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock is traded on the NASDAQ Global Market, under the symbol KEQU. The following table sets forth the quarterly high and low prices reported on the NASDAQ Global Market for our stock over the last two fiscal years.

As of July 10, 2014,13, 2016, we estimate there were approximately 1,0001,239 holders of our common shares, of which 175153 were stockholders of record. We paid cash dividends per share of $0.51, $0.47 and $0.44 for fiscal years 2014,2016, 2015 and $0.40 for fiscal years 2013 and 2012,2014, respectively. We expect to pay dividends in the future in line with our actual and anticipated future operating results.

SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS

See Item 12 in this Form 10-K for a discussion of securities authorized for issuance under our equity compensation plans.

Item 6. Selected Financial Data

The following tables set forth selected historical consolidated financial and other data for the periods indicated. The consolidated financial data should be read in conjunction with Item 8, Financial Statements and Supplementary Data, and with Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

Certain statements in this document constitute “forward-looking” statements within the meaning of the Private Securities Litigation Reform Act of 1995 (the “Reform Act”). All statements other than statements of historical fact included in this Annual Report, including statements regarding the Company’s future financial condition, results of operations, business operations and business prospects, are forward-looking statements. Words such as “anticipate,” “estimate,” “expect,” “project,” “intend,” “plan,” “predict,” “believe” and similar words, expressions and variations of these words and expressions are intended to identify forward-looking statements. Such forward-looking statements are subject to known and unknown risks, uncertainties, assumptions, and other important factors that could significantly impact results or achievements expressed or implied by such forward-looking statements. Such factors, risks, uncertainties and assumptions include, but are not limited to, competitive and general economic conditions, both domestically and internationally; changes in customer demands; technological changes in our operations or in our industry; dependence on customers’ required delivery schedules; risks related to fluctuations in the Company’s operating results from quarter to quarter; risks related to international operations, including foreign currency fluctuations; changes in the legal and regulatory environment; changes in raw materials and commodity costs; and acts of terrorism, war, governmental action, natural disasters and other Force Majeure events. The cautionary statements made pursuant to the Reform Act herein and elsewhere by us should not be construed as exhaustive. We cannot always predict what factors would cause actual results to differ materially from those indicated by the forward-looking statements. Over time, our actual results, performance, or achievements will likely differ from the anticipated results, performance or achievements that are expressed or implied by our forward-looking statements, and such difference might be significant and harmful to our stockholders’ interest. Many important factors that could cause such a difference are described under the caption “Risk Factors,” in Item 1A of this Annual Report, which you should review carefully.

MANAGEMENT’S DISCUSSION AND ANALYSIS

INTRODUCTION

Kewaunee Scientific Corporation is a recognized leader in the design, manufacture and installation of laboratory, healthcare and technical furniture products. The Company’s corporate headquarters are located in Statesville, North Carolina. The Company’sDirect sales offices are located in the United States, India, Singapore, and China. Three manufacturing facilities are located in Statesville serving the domestic and international markets, and one manufacturing facility is located in Bangalore, India.India serving the local and Asian markets. The Company has subsidiariesCompany’s China headquarters, sales office, and assembly operation are located in Singapore, India and China that serve the Asian and Middle East markets.Suzhou Industrial Park, China. Kewaunee Scientific’sScientific Corporation’s website is located atwww.kewaunee.com.

Our products are primarily sold through purchase orders and contracts submitted by customers through our dealers and commissioned agents, a national distributor, and through competitive bids submitted by us and our subsidiaries. Products are sold principally to pharmaceutical, biotechnology, industrial, chemical and commercial research laboratories, educational institutions, healthcare institutions, governmental entities, manufacturing facilities and users of networking furniture. We consider the markets in which we compete to be highly competitive, with a significant amount of the business involving competitive public bidding.

It is common in the laboratory and healthcare furniture industries for customer orders to require delivery at extended future dates, as products are frequently to be installed in buildings yet to be constructed. Changes or delays in building construction may cause delays in delivery of the orders and our recognition of the sale. Since prices are normally quoted on a firm basis in the industry, we bear the burden of possible increases in labor and material costs between quotation of an order and delivery of the product. The impact of such possible increases is considered when determining the sales price. The principal raw materials and products manufactured by others used in our products are cold-rolled carbon and stainless steel, hardwood lumbers and plywood, paint, chemicals, resins, hardware, plumbing and electrical fittings. Such materials and products are purchased from multiple suppliers and are typically readily available.

CRITICAL ACCOUNTING POLICIES

In the ordinary course of business, we have made a number of estimates and assumptions relating to the reporting of results of operations and financial position in the preparation of our consolidated financial statements in conformity with generally accepted accounting principles in the United States of America. Actual results could differ significantly from those estimates. We believe that the following discussion addresses our most critical accounting policies, which are those that are most important to the

portrayal of our financial condition and results of operations, and require management’s most difficult, subjective and complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain.

Revenue Recognition

A portion of our product sales result from fixed-price construction contracts. In these instances, we are usually in the role of a subcontractor, but in some cases may enter into a contract directly with the end-user of the products. Our contract arrangements normally do not contain a general right of return relative to the delivered items. Product sales resulting from fixed-price construction contracts are generated from multiple-element arrangements that require separate units of accounting and estimates regarding the fair value of individual elements. The Company has determined that its multiple-element arrangements that qualify as separate units of accounting are (1) product sales and (2) installation services. There is objective and reliable evidence of fair value for both the product sales and installation services, and allocation of arrangement consideration for each of these units is based on their relative fair values. Each of these elements represents individual units of accounting, as the delivered item has value to a customer on a stand-alone basis. The Company’s products are regularly sold on a stand-alone basis to customers which provides vendor-specific objective evidence of fair value. The fair value of installation services is separately calculated using expected costs of installation services. Many times the value of installation services is calculated using price quotations from subcontractors to the Company, who perform installation services on a stand-alone basis. Assuming all other criteria for revenue recognition have been met, we recognize revenue for product sales at the date of shipment. Product sales resulting from purchase orders involve a purchase order received by us from our dealers or our stocking distributor. This category includes product sales for standard products, as well as products which require some customization. These sales are recognized under the terms of the purchase order which generally are freight on board (“FOB”) shipping point and do not include rights of return. Accordingly, these sales are recognized at the time of shipment.

Allowance for Doubtful Accounts

Evaluation of the allowance for doubtful accounts involves management judgments and estimates. We evaluate the collectability of our trade accounts receivable based on a number of factors. In circumstances where management is aware of a customer’s inability to meet its financial obligations to us, or a project dispute makes it unlikely that all of the receivable owed by a customer will be collected, a specific reserve for bad debts is estimated and recorded to reduce the recognized receivable to the estimated amount we believe will ultimately be collected. In addition to specific customer identification of potential bad debts, a general reserve for bad debts is estimated and recorded based on our recent past loss history and an overall assessment of past due trade accounts receivable amounts outstanding.

Inventories

The majority of inventories are valued at the lower of cost or market under the last-in, first-out (“LIFO”) method. The LIFO method allocates the most recent costs to cost of products sold, and, therefore, recognizes into operating results fluctuations in raw materials and other inventory costs more quickly than other methods. Inventories at our international subsidiaries are measured on the first-in, first-out (“FIFO”) method.

Pension Benefits

We sponsor pension plans covering all employees who met eligibility requirements as of April 30, 2005. In February 2005, our pension plans were amended as of April 30, 2005. No further benefits have been, or will be, earned under the plans subsequent to the amendment date, and no additional participants have been, or will be, added to the plans. Several statistical and other factors, which attempt to anticipate future events, are used in calculating the expense and liability related to the pension plans. These factors include assumptions about the discount rate used to calculate and determine benefit obligations and expected return on plan assets within certain guidelines. The actuarial assumptions used by us may differ materially from actual results due to changing market and economic conditions, higher or lower withdrawal rates, or longer or shorter life spans of participants. These differences may significantly affect the amount of pension income or expense recorded by us in future periods.

Self-Insurance Reserves

The Company is self-insured for workers compensation and health-care. The Company has purchased specific stop-loss insurance to limit claims above a certain amount. Estimated workers compensation losses were accrued during the fiscal year and are subject to retroactive loss adjustments. Estimated medical reserves were accrued for claims incurred but not reported (“IBNR”) using assumptions based upon historical loss experiences. The Company’s exposure reflected in the self-insurance reserves varies

depending upon market conditions in the insurance industry, availability of cost-effective insurance coverage, and actual claims versus estimated future claims.

RESULTS OF OPERATIONS

Sales for fiscal year 20142016 were $111.2$128.7 million, a decreasean increase of 5%8% from fiscal year 20132015 sales of $117.1$118.8 million. Domestic Operations sales for fiscal year 20142016 were $91.8$103.0 million, a decreasean increase of 2%11% from fiscal year 20132015 sales of $93.5$93.1 million. The decreaseincrease in domestic sales was dueattributable to growth throughout the Company’s successful strategy to improve product mixyear from our dealers and margins by selling more laboratory projects through its dealer network (instead of directly to the customer), with the Company only providing manufactured products and the dealers providing related project management, installation, and other service activities.distribution network. International Operations sales for fiscal year 20142016 were $19.4$25.6 million, a decrease of 18%relatively unchanged from fiscal year 20132015 sales of $23.6$25.7 million. The decrease in

international sales was due to a delay in the required ship date for a large order. Sales for fiscal year 20132015 were $117.1$118.8 million, an increase of 13.9%7% from fiscal year 20122014 sales of $102.8$111.2 million. Domestic Operations sales for fiscal year 20132015 were $93.5$93.1 million, an increase of 11.4%1% from fiscal year 20122014 sales of $84.0$91.8 million. The increase in Domestic Operationsdomestic sales was dueattributable to increased activity for mid-sized projects and several large direct projects.strong incoming orders during the fourth quarter of fiscal year 2015. International Operations sales for fiscal year 20132015 were $23.6$25.7 million, an increase of 25%33% from fiscal year 20122014 sales of $18.9$19.4 million. The increase in International Operations sales was due to shipments during the shipmentyear of several large international orders.larger orders received in fiscal year 2014.

Our order backlog was $100.5 million at April 30, 2016, as compared to $90.1 million at April 30, 2015 and $89.0 million at April 30, 2014, as compared to $80.2 million at April 30, 2013 and $86.2 million at April 30, 2012.2014.

Gross profit represented 19.8%18.4%, 19.0%18.3% and 18.6%19.8% of sales in fiscal years 2014, 20132016, 2015 and 2012,2014, respectively. The increasedecrease in gross profit margin forsince fiscal year 2014 was primarily due to a more favorable product sales mix. The increasevery competitive pricing in gross profit marginthe domestic laboratory furniture marketplace, particularly for fiscal year 2013 was primarily due to cost savings initiatives and a more favorable product mix.the large higher education projects.

Operating expenses were $16.1$18.0 million, $17.0$16.5 million and $16.4$16.1 million in fiscal years 2014, 20132016, 2015 and 2012,2014, respectively, and 14.5%14.0%, 14.5%13.9% and 16.0%14.5% of sales, respectively. The decreaseincrease in operating expensesexpense dollars in fiscal year 20142016 as compared to fiscal year 2013 includes2015 resulted primarily from an increase in nonrecurring expenses of $679,000 related to the retirement and replacement of a declinekey executive and an increase of $425,000$219,000 in corporate salaryincentive compensation, an increase of $269,000 in pension expense, and benefit costs.an increase of $276,000 in the operating expense of the Company’s International operations. The increase in operating expense dollars in fiscal year 20132015 as compared to fiscal year 20122014 resulted primarily from higher pension expensean increase in operating expenses of $442,000 and $519,000$640,000 attributed to the growth in expense related to compensation earned under performance incentive plans. These increases wereInternational business, partially offset by decreases in pension expense of $214,000 and bad debt expensesexpense of $180,000 and sales and marketing expenses of $317,000.$61,000.

Other income was $395,000, $306,000$347,000, $484,000 and $271,000$395,000 in fiscal years 2014, 20132016, 2015 and 2012,2014, respectively. The increasedecrease in other income in fiscal years 2014 and 2013year 2016 was primarily due to increasesa decrease in interest income earned from cash on hand at the international subsidiaries. The increase in other income in fiscal year 2015 was primarily due to an increase in interest income from cash on hand at the international subsidiaries.

Interest expense was $373,000, $362,000$306,000, $325,000 and $445,000$373,000 in fiscal years 2016, 2015 and 2014, 2013 and 2012, respectively. Interest expense in fiscal year 2014 was flat as compared to fiscal year 2013. The decreasedecreases in interest expense for fiscal year 2013 wasyears 2016 and 2015 were primarily due to lower levels of bank borrowings and the increase in fiscal year 2012 was due to higher levels of borrowings.

Income tax expense was $1,983,000, $1,540,000,$1,862,000, $1,745,000 and $739,000$1,983,000 in fiscal years 2014, 20132016, 2015 and 2012,2014, respectively, or 33.1%32.4%, 29.5%32.4% and 29.1%33.1% of pretax earnings, respectively. The effective tax rate for each of these years is lower than the statutory rate due to the favorable impact of tax rates for the Company’s international subsidiaries and the impact of state and federal tax credits. The increasedecrease in the effective tax rate forfrom fiscal year 2014 wasis primarily duerelated to increased earningsthe utilization of tax credits and the reduction in tax jurisdictions with higher effective tax rates.a related valuation allowance that had been established in prior years.

Net earnings attributable to the noncontrolling interest related to our subsidiaries that are not 100% owned by the Company were $108,000, $637,000,$75,000, $111,000 and $769,000$108,000 for fiscal years 2014, 20132016, 2015 and 2012,2014, respectively. The decrease in fiscal year 2014 from fiscal year 2013 is primarily related to the purchase in the first quarter of the year of the noncontrolling interest in Kewaunee Labway Asia Pte. Ltd., the Company’s principal international subsidiary, increasing the Company’s ownership to 100%. The changes from fiscal year 2013 to fiscal year 2012 in the net earnings attributable to the noncontrolling interest for each year were directly attributabledue to changes in the levels of net income of the subsidiaries.

Net earnings in fiscal year 20142016 were $3,895,000,$3,802,000, or $1.48$1.42 per diluted share. Net earnings in fiscal year 20132015 were $3,044,000,$3,529,000, or $1.17$1.33 per diluted share, and net earnings in fiscal year 20122014 were $1,031,000,$3,895,000, or $0.40$1.48 per diluted share.

LIQUIDITY AND CAPITAL RESOURCES

Our principal sources of liquidity have historically been funds generated from operating activities, supplemented as needed by borrowings under our revolving credit facility. Additionally, certain machinery and equipment are financed by non-cancelable operating leases. We believe that these sources of funds will be sufficient to support ongoing business requirements, including capital expenditures, through fiscal year 2015.2017.

At April 30, 2014,2016, we had advances of $2.9$3.6 million and standby letters of credit aggregating $4.3$4.2 million outstanding under our unsecured $20 million revolving credit facility. See Note 3 of the Notes to Consolidated Financial Statements included in Item 8 of this Annual Report for additional information concerning our credit facility. We did not have any off balance sheet arrangements at April 30, 2014.2016.

The following table summarizes the cash payment obligations for our lease arrangements, long-term debt, and other non-current liabilities as of April 30, 2014:2016:

PAYMENTS DUE BY PERIOD

($ in thousands)

Operating activities provided cash of $7.3 million in fiscal year 2016, primarily from operating earnings, a decrease in receivables and an increase in accounts payable and accrued expenses, partially offset by an increase in inventories. Operating activities provided cash of $2.3 million in fiscal year 2015, primarily from operating earnings and an increase in accounts payable and other accrued expenses, partially offset by increases in receivables and inventories. Operating activities provided cash of $8.1 million in fiscal year 2014, primarily from operating earnings and decreases in accounts receivablereceivables and inventory,inventories, partially offset by decreases in accounts payable and other accrued expenses. Operating

The Company’s financing activities providedused cash of $3.8 million induring fiscal year 2013,2016 of $3.4 million primarily from earningsfor cash dividends of $1,361,000 paid to stockholders, cash dividends of $75,000 paid to minority interest holders, repayments of short-term borrowings of $1,137,000, an installment payment of $888,000 toward the purchase of the noncontrolling interest in a subsidiary, and an increase in accounts payable and other accrued expenses, partially offset by increases in accounts receivable and inventory. Operatingrepayment of long-term debt of $422,000. The Company’s financing activities providedused cash of $6.9 million induring fiscal year 2012,2015 of $743,000 primarily from operating earningsfor cash dividends of $1,234,000 paid to stockholders, cash dividends of $38,000 paid to minority interest holders, an installment payment of $888,000 toward the purchase of the noncontrolling interest in a subsidiary, and a decrease in accounts receivable, partiallyrepayment of long-term debt of $421,000, offset by an increase in the provision for deferred income taxes and an increase in inventory.

short-term borrowings of $1,805,000. The Company’s financing activities used cash of $5,549,000 during fiscal year 2014 for payment of $1,780,000 toward the purchase of the noncontrolling interest in a subsidiary, repayment of short-term borrowings of $3,847,000, cash dividends of $1,122,000 paid to stockholders, and cash dividends of $38,000 paid to minority interest holders. This was partially offset by a net increase in long-term debt of $1,146,000 in conjunction with the replacement of the Company’s long-term debt with a new lender. See Note 3 and Note 10 of the Notes to Consolidated Financial Statements included in Item 8 of this Annual Report for additional information concerning our credit facility and the purchase of the noncontrolling interest in our subsidiary. The Company’s financing activities used cash of $1,718,000 during fiscal year 2013, primarily for cash dividends of $1,035,000 paid to stockholders, and cash dividends of $744,000 paid to minority interest holders. The Company’s financing activities used cash during fiscal year 2012 of $1,086,000 primarily for the payment of cash dividends.

The majority of the April 30, 20142016 accounts receivable balances are expected to be collected during the first quarter of fiscal year 2015,2017, with the exception of retention amounts on fixed-price contracts which are collected when the entire construction project is completed and all retention funds are paid by the owner.

As discussed above, no further benefits have been, or will be, earned under our pension plans after April 30, 2005, and no additional participants have been, or will be, added to the plans. We anticipateestimate that no contributions of $555,000 will be made to the plans in fiscal year 2015.2017. We made contributions of $300,000$64,000 and $1,000,000$775,000 to the plans in fiscal years 20142016 and 2013,2015, respectively.

Capital expenditures were $2.0$2.2 million, $2.4$2.6 million and $1.4$2.0 million in fiscal years 2014, 20132016, 2015 and 2012,2014, respectively. Capital expenditures in fiscal year 20142016 were funded primarily from operations. Fiscal year 20152017 capital expenditures are anticipated to be approximately $2.3$3.0 million, with the majority of these expenditures for manufacturing equipment. The fiscal year 20152017 expenditures are expected to be funded primarily by operating activities, supplemented as needed by borrowings under our revolving credit facility.

Working capital was $27.2$30.0 million at April 30, 2014,2016, up from $25.1$27.7 million at April 30, 2013,2015, and the ratio of current assets to current liabilities was 2.7-to-1.02.4-to-1.0 at April 30, 20142016 and 2.1-to-1.02.3-to-1.0 at April 30, 2013.2015. The increase in working capital for fiscal year 20142016 was primarily due to the increase in cash providedand inventories, partially offset by operating activities.the decrease in receivables.

We paid cash dividends of $0.51 per share in fiscal year 2016. We paid cash dividends of $0.47 and $0.44 per share in fiscal year 2014. We paid cash dividends of $0.40 per share in fiscal years 20132015 and 2012.2014, respectively. We expect to pay dividends in the future in line with our actual and anticipated future operating results.

RECENT ACCOUNTING STANDARDS

New Accounting StandardsIn February 2013, the FASB issued ASU 2013-02, “Comprehensive Income (Topic 220) – Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income.” This guidance adds new disclosure requirements for items reclassified out of accumulated other comprehensive income (“AOCI”), including changes in AOCI balances by component

and significant items reclassified out of AOCI. This guidance does not amend any existing requirements for reporting net income or AOCI in the financial statements. The Company adopted this standard effective May 1, 2014. The adoption of this standard did not have a significant impact on the Company’s consolidated financial position or results of operations.

In March 2013, the FASB issued ASU 2013-05, “Foreign Currency Matters (Topic 830) – Parent’s Accounting for the Cumulative Translation Adjustment upon Derecognition of Certain Subsidiaries or Groups of Assets within a Foreign Entity or of an Investment in a Foreign Entity.” This guidance issued amendments to address the accounting for the cumulative translation adjustment when a parent entity sells or transfers either a subsidiary or group of assets within a foreign entity. The Company will adoptadopted this standard in fiscal year 2015.effective May 1, 2014. The Company does not expect the adoption of this standard todid not have a significant impact on the Company’s consolidated financial position or results of operations.

In July 2013, the FASB issued ASU No. 2013-11, “Income Taxes (Topic 740) – Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists.” This guidance requires that companies net their unrecognized tax benefits against all same-jurisdiction net operating losses or tax creditscredit carryforwards that would be used to settle the position with a tax authority. This standard is effective for annual reporting periods beginning on or after December 15, 2013 and interim periods within those annual periods. The Company will adoptadopted this standard in fiscal year 2015.effective May 1, 2014. The Company does not expect the adoption of this standard todid not have a significant impact on the Company’s consolidated financial position or results of operations.

In May 2014, the FASB issued ASU 2014-9, “Revenue from Contracts with Customers (Topic 606).” This guidance requires an entity to recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. ThisIn August 2015, this guidance iswas amended deferring the effective fordate to annual reporting periods beginning after December 15, 2017. The Company will adopt this standard in fiscal year 2019. The Company has not yet determined the effect, if any, that the adoption of this standard will have on the Company’s financial position or results of operations.

In April 2015, the FASB issued ASU 2015-03, “Interest (Topic 835) – Imputation of Interest: Simplifying the Presentation of Debt Issuance Costs.” This guidance requires that debt issuance costs related to a recognized liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2015. The Company will adopt this standard in fiscal year 2017. The Company does not expect the adoption of this standard to have a significant impact on the Company’s consolidated financial position or results of operations.

In July 2015, the FASB issued ASU 2015-11, “Inventory (Topic 330) – Simplifying the Measurement of Inventory.” This guidance changes the measurement principle for inventory from the lower of cost or market to the lower of cost and net realizable value. Net realizable value is defined as estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2016. The Company will adopt this standard in fiscal year 2018. The Company has not yet determined the effect, if any, that the adoption of this standard will have on the Company’s financial position or results of operations.

In November 2015, the FASB issued ASU 2015-17, “Income Taxes (Topic 740) – Balance Sheet Classification of Deferred Taxes.” This guidance eliminates the requirement to separate deferred income tax liabilities and assets into current and noncurrent amounts in a classified statement of financial position. Instead, the update requires that deferred tax liabilities and assets be classified as noncurrent in a classified statement of financial position. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2016, andwith early adoption permitted prospectively or retrospectively. The Company early adopted this guidance prospectively beginning with the Consolidated Balance Sheet at April 30, 2016. Prior periods were not retrospectively adjusted.

In February 2016, the FASB issued ASU 2016-2, “Leases (Topic 842).” This guidance establishes a right-of-use (ROU) model that requires a lessee to record a ROU asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement. A modified retrospective transition approach is required for lessees for capital and operating leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements, with certain practical expedients available. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2018. The Company will adopt this standard in fiscal year 2020. The Company has not permitted.yet determined the effect, if any, that the adoption of this standard will have on the Company’s financial position or results of operations.

In March 2016, the FASB issued ASU 2016-9, “Stock Compensation (Topic 718) – Improvements to Employee Share-Based Payment Accounting.” This guidance simplifies various aspects related to how share-based payments are accounted for and presented in the financial statements. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2016. The Company will adopt this standard in fiscal year 2018. The Company has not yet determined the effect, if any, that the adoption of this standard will have on the Company’s financial position or results of operations.

OUTLOOK

Our ability to predict future demand for our products continues to be limited given our role as subcontractor or supplier to dealers for subcontractors. Demand for our products is also dependent upon the number of laboratory construction projects planned and/or current progress in projects already under construction. Our earnings are also impacted by fluctuations in prevailing pricing for projects in the laboratory construction marketplace and increased costs of raw materials, including stainless steel, wood, and epoxy resin, and whether we are able to increase product prices to customers in amounts that correspond to such increases without materially and adversely affecting sales. Additionally, since prices are normally quoted on a firm basis in the industry, we bear the burden of possible increases in labor and material costs between the quotation of an order and delivery of a product. We are also unable to predict the timing and strength of the global economic recovery and its short-term and long-term impact on our operations and the markets in which we compete.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

We are exposed to market risk in the area of interest rates. This exposure is associated with advances outstanding under our bank line of credit and certain lease obligations for production machinery, all of which are priced on a floating rate basis. Advances outstanding under the bank line of credit were $2.9$3.6 million at April 30, 2014.2016. In May 2013, the Company entered into an interest rate swap agreement whereby the interest rate payable by the Company on $3,450,000 of outstanding long-term debt was effectively converted to a fixed interest rate of 4.875% for the period beginning May 1, 2013 and ending August 1, 2017. In May 2013, the Company entered into an interest rate swap agreement whereby the interest rate payable by the Company on $2,600,000 of outstanding long-term debt was effectively converted to a fixed interest rate of 4.37% for the period beginning August 1, 2017 and ending May 1, 2020. In May 2013, the Company entered into an interest rate swap agreement whereby the interest rate payable by the Company on $1,218,000 of outstanding long-term debt was effectively converted to a fixed interest rate of 3.07% for the period beginning November 3, 2014 and ending May 1, 2020. We believe that our exposure to market risk is not material.

Item 8. Financial Statements and Supplementary Data

REPORT OF MANAGEMENT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

TO THE STOCKHOLDERS AND BOARD OF DIRECTORS

OF KEWAUNEE SCIENTIFIC CORPORATION

Management is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external purposes in accordance with accounting principles generally accepted in the United States.

The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of consolidated financial statements in accordance with accounting principles generally accepted in the United States, and that receipts and expenditures of the Company are being made only in accordance with authorizations of Management and Directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the consolidated financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. In addition, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management conducted an evaluation of the effectiveness of internal control over financial reporting based on the framework inInternal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, Management concluded the Company maintained effective internal control over financial reporting as of April 30, 2014.2016.

July 17, 201421, 2016

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

TO THE SHAREHOLDERS AND BOARD OF DIRECTORS

OF KEWAUNEE SCIENTIFIC CORPORATION

STATESVILLE, NORTH CAROLINA

We have audited the accompanying consolidated balance sheets of Kewaunee Scientific Corporation and subsidiaries (the “Company”) as of April 30, 20142016 and 2013,2015, and the related consolidated statements of operations, comprehensive income, (loss), stockholders’ equity and cash flows for each of the three years in the period ended April 30, 2014.2016. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of the Company as of April 30, 20142016 and 2013,2015, and the consolidated results of their operations and their cash flows for each of the three years in the period ended April 30, 2014,2016, in conformity with accounting principles generally accepted in the United States of America.

July 17, 201421, 2016

CONSOLIDATED STATEMENTS OF OPERATIONS

The accompanying Notes are an integral part of these Consolidated Financial Statements.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

The accompanying Notes are an integral part of these Consolidated Financial Statements.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

Kewaunee Scientific Corporation

The accompanying Notes are an integral part of these Consolidated Financial Statements.

CONSOLIDATED BALANCE SHEETS

The accompanying Notes are an integral part of these Consolidated Financial Statements.

CONSOLIDATED STATEMENTS OF CASH FLOWS