UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-K

(Mark One)

For the Fiscal Year Ended December 31 2017, 2022

or

For the Transition Period from ____________ to ____________

Commission File Number 001-36453

SUPERIOR DRILLING PRODUCTS, INC.

(Name of registrant as specified in its charter)

Issuer’s Telephone Number: (435-789-0594435) 789-0594

Securities Registered Pursuant to Section 12(b) of the Exchange Act:

Securities Registered Pursuant to Section 12(g) of the Exchange Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. [  ]☐ Yes [X] ☒ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange. [  ]☐ Yes [X] ☒ No

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section13 or15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. [X] ☒ Yes [  ] ☐ No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). [X] ☒ Yes [  ] ☐ No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”filer,” “smaller reporting company” and “smaller reporting“emerging growth company” in Rule 12b-2 of the Exchange Act.

Emerging growth company [X]

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [  ]☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). [  ]☐ Yes [X] ☒ No

Indicate by check mark whether the registrant has filed a report on and attestation of the effectiveness of its internal control over financial reporting under Section 404(b) of Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by registered public accounting firm that prepared or issued its audit report ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. Yes ☐ No ☒

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). Yes ☐ No ☒

The aggregate market value of common stock held by non-affiliates of the registrant as of June 30, 2022 was approximately $10,948,000 based on the closing market price of $0.99 per share. Shares of common stock held by executive officers and directors of the registrant are not included in the computation. The registrant, solely for the purpose of this required presentation, has deemed its executive officers and directors to be affiliates.

The registrant had issued and outstanding 24,535,13929,245,080 shares of its common stock on March 15, 2018.2023.

Documents incorporated by reference: NONE.NONE.

SUPERIOR DRILLING PRODUCTS, INC.

FORM 10-K

FOR THE YEAR ENDED DECEMBER 31, 20172022

Cautionary Note Regarding Forward-Looking Statements

This Annual Report on Form 10-K includes certain statements that may be deemed to be “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Statements contained in all parts of this document that are not historical facts are forward-looking statements that involve risks and uncertainties that are beyond the control of Superior Drilling Products, Inc. (the “Company” or “SDPI”). You can identify the Company’s forward-looking statements by the words “anticipate,” “estimate,” “expect,” “may,” “project,” “believe” and similar expressions, or by the Company’s discussion of strategies or trends. Although the Company believes that the expectations reflected in such forward-looking statements are reasonable, no assurances can be given that these expectations will prove to be correct. The forward-looking statements contained in or incorporated by reference into this Form 10-K are largely based on our expectations, which reflect estimates and assumptions made by our management. These estimates and assumptions reflect our best judgment based on currently known market conditions and other factors. Although we believe such estimates and assumptions to be reasonable, they are inherently uncertain and involve a number of risks and uncertainties that are beyond our control, including:

Many of these factors are beyond our ability to control or predict. These factors are not intended to represent a complete list of the general or specific factors that may affect us. The events in Russia and surrounding areas may result in political instability and may add a potential risk.

In addition, management’s assumptions about future events may prove to be inaccurate. All readers are cautioned that the forward-looking statements contained in this Annual Report on Form 10-K are not guarantees of future performance, and we cannot assure any reader that such statements will be realized or that the forward-looking events and circumstances will occur. Actual results may differ materially from those anticipated or implied in the forward-looking statements due to factors described in “Item 1A. Risk Factors” included elsewhere in this prospectus and in the documents that we include as exhibits to this Annual Report, and our subsequent SEC filings. All forward-looking statements speak only as of the date they are made. We do not intend to update or revise any forward-looking statements as a result of new information, future events or otherwise, except as required by law. These cautionary statements qualify all forward-looking statements attributable to us or persons acting on our behalf.

PART I

ITEM 1. BUSINESS

Nature of OperationsOur Company

Superior Drilling Products, Inc. (the “Company”, “SDPI”, “we”, “our” or “us”) is an innovative drilling and completion tool technology company providing cost saving solutions that drive production efficiencies for the oil and natural gas drilling and completions industry. Our headquarters and manufacturing operations are located in Vernal, Utah. TheOur drilling solutions include the patented Drill-N-Ream® well bore conditioning tool (“Drill-N-Ream tool” or “DNR”) and the patented Strider™ Drill String Oscillation System technology (“Strider technology” or “Strider”). In addition, the Company innovates, designs, engineers, manufactures, sells,is a manufacturer and repairs drilling and completion tools. We design and manufacture new drill bit and horizontal drill string enhancement tools and refurbishrefurbisher of PDC (polycrystalline diamond compact) drill bitsbits. We operate a state-of-the-art fabrication facility where we manufacture solutions for the oil, natural gasdrilling industry, as well as various customers’ custom products in other industries. We are also developing a Middle East repair center.

Our history dates back to 1995 when we were founded by Troy and mining services industry.Annette Meier as a drill bit refurbishment company. Our customers are primarily service companies that support companies engaged in domestic and international exploration and productionco-founder, Troy Meier, developed the first commercially-viable process for refurbishing PDC drill bits after a successful 13-year career with a predecessor of oil and natural gas.

Baker Hughes Inc. He was also co-inventor of the patented Drill-N-Ream® tool. We were incorporated on December 10, 2013 under the name SD Company, Inc. in order to facilitate (a) the reorganization of the entities that are now our consolidated subsidiaries and (b) the subsequent acquisition of Hard Rock Solutions, LLC (“HR”). We changed our name from SD Company Inc. to Superior Drilling Products, Inc. on May 22, 2014 in conjunction with closing of that reorganization and our initial public offering, which occurred on May 23, 2014 (“Offering” or “IPO”). Our corporate headquarters and manufacturing operations are located in Vernal, Utah. Our common stock trades on the NYSE MKTAmerican exchange under the ticker symbol “SDPI”.

Our subsidiaries include (a) Superior Drilling Solutions, LLC (previously known as Superior Drilling Products, LLC), a Utah limited liability company (“SDS”), together with its wholly owned subsidiary Superior Design and Fabrication, LLC, a Utah limited liability company (“SDF”), (b) Extreme Technologies, LLC, a Utah limited liability company (“ET”), (c) Meier Properties Series, LLC, a Utah limited liability company (“MPS”), (d) Meier Leasing, LLC, a Utah limited liability company (“ML”), and (e) HR.

Global Market Conditions

The oil and gas industry has been in a rapid recovery the last two years following the significant fall off of activity with the global pandemic in March 2020.Activity in the oil field is typically measured by rig counts. Total U.S. rig count as reported by Baker Hughes as of March 3, 2023 was 749 rigs, an increase of 99 rigs from the rig count as of December 31, 2021.

The Middle East market began to improve during 2022 after a slow rebound from the COVID-19 impact. Total rig count in that region as of February 28, 2023 was 327 compared with 282 at the same time last year.

Background of Business

We innovate, design, engineer, manufacture, sell, and repair drilling and completion tools in the United States, Canada, and the Middle East.

We currently have three basic operations:

Our Company

Our strategy for growth is to expand the global market penetration of our current drilling tool solutions and to leverage itsour expertise in drilldrilling tool technologytechnologies and precision machining in order to broaden our product offerings and solutions for the oil and gas industry.industry, as well as other industries that require precision machining and quality. We believe through our patented technologies, as well as technologies under development, that we can offer the oil and gas industry the solutions it demands to improve drilling efficiencies and reduce production costs.

Our co-founder, Troy Meier, developed the first commercially-viable process for refurbishing PDC drill bits after a successful 13-year careerMajor Customers

The Company has Vendor Agreements with a predecessor of Baker Hughes Inc. He was also co-inventor of the patented Drill-N-Ream® well bore conditioning toolOilfield Operations LLC (“Drill-N-Ream tool” or “DnR”Baker Hughes”), Drilling Tools International (“DTI”), Weatherford U.S., L.P. (“Weatherford”), Odfjell Drilling, National Energy Services Reunited Corp. (“NESR”) and Schlumberger Oman & Co. LLC (“Schlumberger”).

Baker Hughes: We used the proceeds from our IPO to acquire the remaining rights to the tool. While our initial strategy after the acquisition was to be a rental tool company, we made a major strategic shift in 2016 to focus on our core competencies of innovation in manufacturing technologies, creation of solution for the upstream oil and gas industry, drilling tool fleet maintenance and repair and the development engineering and manufacture of new tools and technologies.

For the past 22 years, we have manufactured and refurbished PDC drill bits exclusively for Baker Hughes’s oilfield operations in the Rocky Mountain, California and Alaska regions as well as other areas as needed to support their internal operations. We have extendedfor since 1996. In 2018, we re-negotiated our long-standing contractagreement with Baker Hughes until March 31, 2018whereby we now refurbish PDC bits for all of Baker Hughes’s U.S. geographic areas. In 2020, we further re-negotiated our agreement whereby we can now refurbish PDC bits for any PDC bit supplier. We are currently in order to ensure there is no disruptionthe process of service while we negotiate new terms that broadenrenewing our relationship with them.contract.

DTI: We have been expanding our offerings and broadening our customer base and the end-users of our technologies by demonstrating our engineering, design and manufacturing expertise of down-hole drilling tools. In addition to the patented Drill-N-Ream tool, our products include the patented Strider™ Drill String Oscillation System technology (“Strider technology”) which is applied to the Open Hole Strider tool (“OHS”) and the CTS (coiled tubing strider), the V-Stream Advanced Conditioning System and the Dedicated Reamer Stinger. We are also developing a suite of other horizontal drill string tools, each of which addresses a different technical challenge presented by today’s horizontal drilling designs. In addition, we workworking with our customers to develop new products and enhancements to existing products in order to improve efficiency and safety and solve complex drilling tool problems.

We manufacture our solutions, as well as custom products, in our state-of-the-art drill tool fabrication facility where we operate a technologically-advanced PDC drill bit refurbishing facility, as well as a state-of-the-art, high-tech drilling and completion tool engineering design and manufacturing operation. We manufacture our drill string enhancement tools, including the patented Drill- N-Ream tool and the patented Strider technology, and conduct our new product research and development from this facility.

We employ a senior work force with specialized training and extensive experience related to drill bit refurbishing and drill and completion tool manufacturing. They produce our products and services using a suite of highly technical, purpose-built equipment, much of which we design and manufacture for our proprietary use. Our manufacturing equipment and products use advanced technologies that enable us to increase efficiency, enhance product integrity, improve efficiency and safety, and solve complex drilling tool problems.

In May 2016, the Company entered into an agreement with Drilling Tools International (“DTI”), under which DTI had a requirement to purchasesince 2016. DTI purchases our Drill-N-Ream tool for their rental tool business and achieve market share requirements in order to maintain exclusive marketing rights for the Drill-N-Ream. This agreement began the shift of our business model from a rental tool company to a manufacturer that designs, builds and sells tools. DTI, has exclusive rights to market the Drill-N-Ream in the U.S. and Canada, both onshore and offshore. It must achieve defined market share goals with our tool that started in June 2017 and increase through the end of 2020.business. We receive revenue from DTI for tool sales, tool repairs and a royalty fee based on the tools usage.

In 2016, Pursuant to our original agreement, DTI was required to achieve certain market share requirements in order to maintain exclusive marketing rights for the Drill-N-Ream in the U.S. and Canada, both onshore and offshore. DTI did not achieve the defined market share goals in 2017 and, therefore, no longer has exclusive rights to market the Drill-N-Ream. As a result, the Company entered into a non-exclusive agreementcan work with Baker Hughesother customers to supply them withexpand the Strider technology with our open Hole Strider tool and related services. Tool shipments undermarket reach of the agreement are expected to begin mid-2018. The agreement has no set expiration date or minimum shipment requirement. It will remain in force until it is canceled by either us or Baker Hughes, as stipulatedDrill-N-Ream in the agreement. The Company’s current agreement with Baker Hughes regarding drill bit refurbishment has been extended until March 31, 2018. The Company is currently negotiating new terms for a replacement agreement with the intent to broaden the relationship with Baker HughesU.S. and not have any disruption in operations or production.Canada.

In December 2017, the Company entered into an agreementInternational: We are working with Weatherford, U.S., L.P. (“Weatherford”)Odfjell Drilling, NESR, and Schlumberger to launch a joint market development program to introduce and gain exposure of our Drill-N-Ream tool in the Middle East. Under the development agreement, Weatherford and SDPI will demonstrate the Drill-N-Ream’s capabilities withto large Middle East operators in Saudi Arabia, Kuwait and Oman.

Our Products

Drill-N-Ream Tool. The programDrill-N-Ream tool is planneda dual-section wellbore conditioning tool which is located approximately 150 feet behind the bottom hole assembly, also known as BHA. Concurrently as the well bore is being drilled, the Drill-N-Ream tool conditions the well bore. It smooths and slightly enlarges the well drift in all sections of horizontal or directionally-drilled wells, in both oil and water-based mud. It reduces tortuosity resulting from the geo-steering drill bit, and the overcorrections and formation interactions that occur during directional drilling. With the well bore conditioned by the Drill-N-Ream, the drill string is then able to continuemove through June 30, 2018. SDPIthe conditioned well bore with less friction and Weatherford each employ a local resident Product Championstress.

The Drill-N-Ream tool accelerates drilling speed and extends the horizontal distance of the well bore by:

The number of “trips” required by the operator, or the number of times the drill string has to execute the pilot test program of 18 Drill-N-Ream tools. Upon the technology being provenbe removed and reinserted in the region,wellbore, is reduced as a result of the parties planperformance of the Drill-N-Ream tool. Each time a drilling operator has to enter intotrip the drill string and replace a long-term commercial agreement.bit or other drill string component, it costs the operator substantial time and money, so we believe anything that allows each run to extend further without additional tripping is of great value to our customers. Traditional methods for conditioning the well bore entails removing the drill string and running a dedicated reamer through the well bore, typically in two separate runs. The Drill-N-Ream tool eliminates the need for dedicated reamer runs, and therefore reduces the cost of drilling a horizontal well.

The Drill-N-Ream tool is available in multiple sizes and can be custom manufactured to accommodate most drill hole sizes.

We believe that the Drill-N-Ream tool’s rapid adoption and continued use by operators validates its effectiveness and industry acceptance. In fact, leading operators have begun to standardize their drilling assembly with a Drill-N-Ream tool. In addition, we understand that a number of end users have rented the Drill-N-Ream tool after first trying competitive products. We expect the above factors to support increasing interest in, and revenue from, the Drill-N-Ream tool over the next several years as more well operators’ reports of its effectiveness are transmitted through word-of-mouth by an increasing user base to other well operators globally.

Strider Technology. The Strider technology utilizes its unique patented design to reduce drill string friction on horizontal wells, resulting in improved rates of penetration and cost savings. The Strider technology is designed to help dissipate the inertial drag of a horizontal drill string by generating rhythmic pulses that break the frictional connection between the drill strings and well bore greatly enhancing drilling rates. Its revolutionary engineering provides a cost-effective alternative to conventional downhole vibration tools.

The Strider technology is composed of two main parts, a hydraulic channeling chamber (“HCC”) and a rhythmic pulsation chamber (“RPC”). The RPC contains a precisely engineered, high speed pulse-valve that systematically restricts flow area. During flow restriction, or “closure”, the ideal amount of fluid is allowed to continue down hole. This perfectly controlled hydraulic flow produces an optimal pulse frequency, which is preferred for bottom hole assembly equipment. The optimal pulse frequency also allows for placement of the Strider technology closer to the bit than typical oscillation tools.

We believe that our Strider technology is at the forefront of drill string tool technological development for horizontal drilling. We also believe our Strider technology offers significant advantages over our competitors’ drill string stimulation tools.

V-Stream advanced conditioning system (“V-Stream”). The V-Stream tool is an integral spiral blade stabilizer and is engineered to combine stabilization with reaming. A cavity or plenum in the middle of the blades facilitates enhanced fluid flow for cuttings transport and reduces torque when compared with typical stabilizers with similar overall blade length. Non-active cutters at gauge enable the V-Stream to remove formation and condition the hole while controlling deviation. With these unique features, the V-Stream will stabilize the bottom hole assembly and condition the hole simultaneously to optimize the drilling operations.

Our Strategy for Growth

We intend to pursue the followingOur strategy for growth strategies as we seekis to expand the global market penetration of our market share and solidify our position as a competitivecurrent drilling tool manufacturersolutions and to leverage our expertise in drilling tool technologies and precision machining in order to broaden our product offerings and solutions for the oil and gas industry, as well as other industries that require precision machining and quality. We believe through our patented technologies, as well as technologies under development, that we can offer the oil and gas industry the solutions it demands to improve drilling industry:efficiencies and reduce production costs. Specific examples of this strategy include:

Leverage highly advanced tool technologies. We currently have two highly differentiated advanced drilling tool technologies (the Drill-N-Ream tool and the Strider technology) that address challenges encountered in the oil and gas drilling marketplace.

● The Strider technology is a patented drill string oscillation system that minimizes drill string friction thereby improving weight on bit for directional drilling. Its technological advancements, including a two-part design, enable the Strider to be placed closer to the drill bit than other oscillation tools. We have two tools that incorporate the Strider technology: the CTS and the OHS.

● The Drill-N-Ream tool has a unique design that provides a cleaner well bore with fewer ledges and a wider drift, while eliminating the need for a dedicated reaming run. As a result, our end users experience fewer drill string tool failures and reduce the number of drilling days per well.

Expand our channels to market and geographic reach. We have strategically shifted from creating a rental tool business toare leveraging existing distribution channels in the exploration and production industry. As noted earlier, in May 2016, weWe have entered into an agreement with DTI, establishing DTI as the exclusivea distributor of our patented Drill-N-Ream tool in the United States and Canada onshore and offshore markets. As a result of this agreement, we believe our technology will penetratehas penetrated the market more efficiently as DTI already has developedby leveraging DTI’s long-term relationships with end users. We are also evaluating opportunities to further our reach into the North American market.

We are expanding our channels to market and our geographic presence, withespecially in the market development agreementMiddle East as evidenced by agreements that we entered into with Weatherford in December 2017.2017, Odfjell Drilling in November 2018, NESR in 2019 and Schlumberger in 2021. We expect to add additional distributors as we expand our tool offering.offering and geographic reach. We also expect to leverage our distributor and customer relationships to identify needs for new tool development and to use these channels to market a broadened product offering as it is developed.

We are currently negotiating a new agreement with Baker Hughes to broaden our relationship beyond what we have provided for them the past 22 years. While Baker Hughes continues to use us for its drill bit refurbishment in the Rocky Mountain and other Western regions of the U.S., we have also leveraged our long time relationship to increase our market penetration. In 2016, we added our OHS tool rental agreement to our drill bit refurbishing business with Baker Hughes. Their sales force will now offer the OHS in order to provide a complete offering to their customers. We intend to continue to develop our long-time relationship with Baker Hughes and look for other ways to partner with them.

Strengthen and support our employees. Our experienced employees and management team are some of our most valuable resources. Attracting, training, and retaining key personnel, has been and will continue to be critical to our success. To achieve our goals, we intend to remain focused on providing our employees with training, personal and professional growth opportunities, as well as adding performance-based incentives, including opportunities for stock ownership, and other competitive benefits. We are also working with the local university and high school to develop and teach local programs in machining and engineering expertise and technical resources.

Seek strategic acquisitions to enhance or expand our product lines. While capital constraints are currently requiring us toour focus is on organic growth, we may identify new technologies to add to our arsenal of tools for the exploration and production industry. In analyzing new acquisitions, we intend to pursue opportunities that complement our existing product line and/or that are geographically situated within our current market. We believe that strategic acquisitions will enable us to exploit economies of scale in the areas of finance, human resources, marketing, administration, information technology, and legal, while also providing cross-marketing opportunities among our drill tool product offerings.

Our Horizontal Drilling Tools and Technologies

Drill-N-Ream Tool. The Drill-N-Ream tool is a dual-section wellbore conditioning tool which is located behind the bottom hole assembly (BHA) to smooth and slightly enlarge the well drift in the curved and horizontal sections of horizontal wells, in both oil and water based mud. The Drill-N-Ream tool is available in multiple sizes and can be custom manufactured to fit any hole size. Concurrently as the well bore is being drilled, the Drill-N-Ream tool conditions the well bore tortuosity brought about from the drill bit geo-steering, and from directional drilling overcorrections and formation interactions which allows the drill string to move through the conditioned well bore left by the drill bit with less friction and stress. As a result, the Drill-N-Ream tool extends the horizontal distance of the well bore by:

(a) smoothing out ledges and doglegs left by the bit, which allows the drill string to move through a conditioned well bore with less friction and stress,

(b) reducing tool joint damages and trip time (i.e. the time required to remove and reinsert the drill string),

(c) enhancing the power available to drive the drill bit assembly,

(d) extending the horizontal distance that can be drilled during a run and making tripping (removal of the drill string), and

(e) the running of casing in the completed well much easier.

This also reduces the number of “trips” required by the operator, or the number of times the drill string has to be removed and reinserted. Each time a drilling operator has to trip the drill string and replace a bit or other drill string component, it costs the operator substantial time and money, so we believe anything that allows each run to extend further without additional tripping is of great value to our customers. Traditional methods for conditioning the well bore entails removing the drill string and running a dedicated reamer through the well bore, typically in two separate runs. The Drill-N-Ream tool eliminates the need for dedicated reamer runs, and therefore reduces the cost of drilling a horizontal well.

We believe that the Drill-N-Ream’s rapid adoption and continued use by operators validates its effectiveness and industry acceptance. In fact, leading operators have begun to standardize their drilling assembly with a Drill-N-Ream tool. In addition, we understand that a number of customers have rented the Drill-N-Ream tool after first trying competitive products. We expect the above factors to support increasing interest in, and revenue from, the Drill-N-Ream tool over the next several years as more well operators’ reports of its effectiveness are transmitted through word-of-mouth by an increasing user base to other well operators globally.

Strider Technology. The Strider technology utilizes its unique patented design to reduce drill string friction on horizontal wells, resulting in improved rates of penetration and cost savings. Its revolutionary engineering provides a cost-effective alternative to conventional downhole vibration tools. The Strider technology is designed to help dissipate the inertial drag of a horizontal drill string by generating rhythmic pulses that break the frictional connection between the drill strings and well bore greatly enhancing drilling rates.

The Strider technology is composed of two main parts, a hydraulic channeling chamber (HCC) and a rhythmic pulsation chamber (RPC). The RPC contains a precisely engineered, high speed pulse-valve that systematically restricts flow area. During flow restriction, or “closure”, the ideal amount of fluid is allowed to continue down hole. This perfectly controlled hydraulic flow produces an optimal pulse frequency, which is preferred for bottom hole assembly equipment. The low frequency also allows for placement of the Strider technology closer to the bit than typical oscillation tools.

We believe that our Strider technology is at the forefront of drill string tool technological development for horizontal drilling. We also believe our Strider technology offers significant advantages over our competitors drill string stimulation tools and will be rapidly accepted in the drilling market and completion markets.

We have two tools that we have developed with our Strider technology: the CTS and OHS.

The CTS is used in the completions industry to assist the coiled tube used to complete previously drilled well bores to get to bottom depth. It is used by oil field services companies that specialize in completions, as well as by the operators. We expect to commercialize the redesigned CTS in mid-2018.

The OHS is used as a component of the bottom hole assembly for drilling to create improved drilling efficiencies by reducing friction and adding additional thrust behind the drill bit. The tool is expected to be commercialized and ready for shipment in mid-2018.

V-Stream advanced conditioning system (“V-Stream”). The V-Stream tool is an integral spiral blade stabilizer and is engineered to combine stabilization with reaming. A cavity or plenum in the middle of the blades facilities enhanced fluid flow for cuttings transport and reduces torque when compared with typical stabilizers with similar overall blade length. Non-active cutters at gauge enable the V-Stream to remove formation and condition the hole while controlling deviation. With these unique features, the V-Stream will stabilize the BHA and condition the hole simultaneously to optimize the drilling operations.

Dedicated Reamer Stinger (“DR Stinger”). DR Stinger is designed to optimize dedicated reamer operations. DR Stinger utilized our fully-patented Drill-N-Ream tool with its dual stage eccentric reamers which conditions well bores by increasing well bore drift. The two reamer stages spaced approximately five feet apart act in unison to force each other into the formation while efficiently reducing ledges, doglegs, and well bore tortuosity. With DR Stinger, a tapered stinger is placed just below the Drill-N-Ream tool at the end of the drill string. The DR Stinger eliminates any bit costs during the reamer operation as it is run without a bit, offering a much better indication of hole conditions. Floats are included in the DR Stinger, as well as an anti-plug port system with both features eliminating any plugging of the drill string. With no bit on the DR Stringer, the drill string will find and keep well bore center preventing unplanned side tracks.

Our Drill Bit Refurbishment Business

Our original arrangement with Baker Hughes was an agreement to perform our drill bit refurbishment work exclusively for their Rocky Mountain, California and Alaskan regions. We believe that we continue to lead the industry in PDC drill bit repair technology – continually improving repair techniques to improve drill bit performance and efficiency. We are negotiating a new agreement with Baker Hughes to both deepen and broaden our relationship with them while providing continuity of service.

Oil and Gas Drilling Industry

Overview

Drilling and completion of oil and gas wells are upstream operations in the oil and gas industry served by the oilfield services group within the energy industry. The drilling industry is often segmented into the North American market and the International market. These markets share common exposure to the same macro environment, but also exhibit unique factors that drive the dynamics of each market.

Oilfield services companies drill the wells for hydrocarbon exploration and production (“E&P”) companies. Demand for drilling services is a function of the willingness of E&P companies to make operating and capital expenditures to explore for, develop and produce hydrocarbons. This is highly dependent upon the global demand for oil and gas, the price of the commodities and the cost of drilling services. When oil or natural gas prices increase, E&P companies generally increase their capital expenditures, resulting in greater revenue and profits for both drillers and equipment manufacturers. Likewise, significant decreases in the prices of those commodities may lead E&P companies to reduce their capital expenditures, which decreases the demand for drilling equipment.

Trends in the Industry

Recent Rig Count Improvement; Industry Volatility. Our business is highly dependent upon the vibrancy of the oil and gas drilling operations in the U.S. Worldwide military, political and economic events have contributed to oil and natural gas price volatility and are likely to continue to do so in the future. Soon after the completion of our IPO in late May 2014 and through early 2016, oil prices dramatically declined in the United States and as a result, the number of operating drill rigs has been measurably reduced. The NYMEX-WTI oil price was as low as $26.19 in February 2016 compared with its current price of $60.51 in February 2018. The NYMEX-Henry Hub natural gas price was as low as $1.49 per MMBtu in March 2016 and in February 2018 rose to $2.63. In concert with the decline in commodity prices, the Baker Hughes weekly rotary rig count decreased over 70% from a high of 1,931 on September 13, 2014 to a historic low of 404 as of May 27, 2016.

The downturn in 2015 and 2016, severely impacted both pricing and volume for drill bit refurbishment. Our contracted areas with Baker Hughes include the higher cost production Bakken shale formation in North Dakota, which had a more dramatic decline in rig count than the overall U.S rig count decline.

The recovery in the industry began during the second half of calendar year 2016 and into 2017, as the U.S. rig count more than doubled from mid-2016 to mid-2017. The rate of growth in rig count stabilized in July 2017 and is still increasing but at a slower rate. Oil and gas production has increased to record levels and grew at a faster rate than the increased rig count because of better rig technology and higher rates of productivity per rig. With the increase in market activity, we have seen an increase in demand for our product and services, although we have not seen an increase in pricing.

Advancing Production Technologies. The oil and gas industry is increasingly using directional (e.g., horizontal) drilling in their exploration and production activities because of significantly improved recovery rates that can be achieved with these methods. With the rise of this type of drilling, traditional drill string tools used for vertical drilling do not necessarily provide the best performance or are not well suited for directional drilling. In addition, lower oil and natural gas prices combined with more technically challenging horizontal drilling has driven the demand for new technologies. We believe the value of our Drill-N-Ream tool and Strider technology have proven to provide significant operational efficiencies and costs savings for horizontal drilling activity and, combined with our low market penetration, provide us sales opportunities in soft as well as robust markets.

GE Oil & Gas merger with Baker Hughes. In October 2016, GE Oil Gas and Baker Hughes announced an agreement to combine their businesses. Currently Baker Hughes is our sole customer for our bit refurbishment business and we expect this merger will impact our collection of accounts receivable from 60 contractual days to 120 contractual days. Despite this, we intend to continue developing our long-time relationship with Baker Hughes including our agreement with Baker Hughes to supply the Strider technology with our OHS tool and related services. As well as the negotiations of an agreement renewal with Baker Hughes that will broaden our relationship beyond the current agreement which was extended to March 31, 2018.

New Product Development and Intellectual Property

Our sales and earnings are influenced by our ability to successfully provide the high-level service and state-of-the-art products that our customers demand, which in turn relies on our ability to develop new processes, technology, and products. We have also historically dedicated additional resources toward the development of new technology and equipment to enhance the effectiveness, safety, and efficiency of the products and services we provide. We expect that with our extensive knowledge and experience in the oilfield industry, we can identify additional challenges with directional drilling, and then design and develop tools that will help our customers with their drilling challenges. Further development of additional drill string components will become increasingly important to our business as we continue to grow through both organic expansion and strategic acquisitions.

During 2016, researchResearch and development costs were approximately $1.2 million. In 2017, our$436,000 for the year ended December 31, 2022, compared with $487,000 for the year ended December 31, 2021. Costs included in research and development include payroll for engineers, materials for the Strider technology, and third-party engineering costs. Research and development costs decreased slightly to $0.7 million, which represented 5%less than approximately 2% and 4% of our 2017 revenue as we continuedfor the years ended December 31, 2022 and 2021, respectively. Legal costs relating to maintain our commitment to new productpatents are not included in research and development during the downturn in our industry.costs.

Although we highly value our proprietary products and technology, we also depend on our technological capabilities, customer service orientedservice-oriented culture, and application of our know-how to distinguish ourselves from our competitors. We also consider the services and products we provide to our customers, our customer relationships, and the technical knowledge and skill of our personnel, to be more important than our registered intellectual property in our ability to compete. While we stress the importance of our research and development programs, the technical challenges and market uncertainties associated with the development and successful introduction of new and updated products are such that we cannot assure investors that we will realize any particular amount of future revenue from the services and related products resulting from our research and development programs.

Suppliers and Raw Materials

We acquire supplies, component parts, products and raw materials from suppliers, including steel suppliers, foundries, forge shops and original equipment manufacturers. The prices we pay for our raw materials may be affected by, among other things, energy, industrial diamond, steel and other commodity prices, tariffs and duties on imported materials and foreign currency exchange rates. Certain of our component parts, products or specific raw materials are only available from a limited number of suppliers. Costs have increased from impacts of inflation and supply chain restraints.

Our ability to obtain suitable quality raw materials and components, such as PDC’s, steel and flux, solder and heating elements, is critical to our ability to remanufacture Baker Hughes drill bits, and to manufacture the Drill-N-Ream tool and Strider technology tools and other future drill linedrilling products. In order to purchase raw materials and components in timely and cost effectivecost-effective manner, we have developed both domestic and international sourcing connections and arrangements. We maintain quality assurance and testing programs to analyze and test these raw materials and components in order to assure their compliance with our rigorous specifications and standards. We generally try to purchase our raw materials from multiple suppliers, so we are not dependent on any one supplier, but this is not always possible.possible.

Because Baker Hughes pays the cost of direct materials and supplies used in our drill bit refurbishing process, cost increases are not as critical as short-term financial components for that line of business. However, theThe price and availability of commodities and components, in particular steel, can have an impact on our operations. We have no assurance that we will be able to continue to purchase these raw materials on a timely basis or at historical prices.

Proprietary Rights

We rely primarily on a combination of patent, trade secret, copyright and trademark laws, confidentialityconfidential procedures, and other intellectual property protection methods to protect our proprietary technology. Mr. Meier currently has U.S. patent applications pending, and related international patent applications pending as co-inventor, and individually with respect to the Strider technology and other pending horizontal drilling tools. There is no assurance that our patent applications will result in issued patents, that the existing patents or that any future patents issued to us will provide any competitive advantages for their products or technology, or that, if challenged, the patents issued to us will be held valid and enforceable. Despite our precautions, unauthorized parties may attempt to copy aspects of our products or obtain and use information that we regard as proprietary. Existing intellectual property laws afford only limited protection and policing violations of such laws is difficult. The laws of certain countries in which our products are or may be used by our customers do not protect our products and intellectual property rights to the same extent as do the laws of the United States. There is no assurance that these protections will be adequate or that our competitors will not independently develop similar technology, gain access to our trade secrets or other proprietary information, or design around our patents.

We may be required to enter into costly litigation to enforce our intellectual property rights or to defend infringement claims by others. Such infringement claims could require us to license the intellectual property rights of third parties. There is no assurance that such licenses would be available on reasonable terms, or at all.

Marketing and SalesCompetition

We do not engage in any marketing or sales efforts for our PDC drill bit refurbishing in the oil and gas industry because we are under an exclusive contract with Baker Hughes for those services.

In 2016, the Company entered into an agreement with DTI, under which DTI has a requirement to purchase our Drill-N-Ream tool for their rental tool business and achieve market share requirements in order to maintain exclusive marketing rights for the Drill-N-Ream tool. This agreement changed our business model from a rental tool company to a manufacturer that designs, builds and sells tools. DTI, has exclusive rights to market the Drill-N-Ream tool in the U.S., both onshore and offshore, and in Canada. It must achieve defined market share goals with our tool which began in June 2017 and increases through to the end of 2020. We are in the process of evaluating DTI’s market share performance as of December 31, 2017, as well as negotiating an amendment to the agreement with DTI. We receive revenue from DTI for tool sales, tool repairs and a royalty fee based on the tools usage.

Our OHS agreement with Baker Hughes enables us to supply our drill string oscillation tool which reduces drill string friction on horizontal wells, resulting in improved rates of penetration and cost savings. The agreement has no set expiration date or minimum shipment requirement. It will remain in force until either SDP or Baker Hughes cancel it. Subject to certain limitations, the agreement is terminable by Baker Hughes on 30 days prior written notice. The tool is expected to be commercialized and ready for shipment in mid-2018.

In December 2017, the Company entered into an agreement with Weatherford to launch a joint market development program to introduce our Drill-N-Ream tool in the Middle East. Under the development agreement, Weatherford and SDPI will demonstrate the Drill-N-Ream’s capabilities with large Middle East operators in Saudi Arabia, Kuwait and Oman. The program is planned to continue through June 30, 2018. SDPI and Weatherford each employ a local resident Product Champion to execute the pilot test program which originally was for 16 Drill-N-Ream tools and has been expanded since then to 18 DnRs. Upon the technology being proven in the region, the parties plan to enter into a long-term commercial agreement.

Competitive Strengths

We believe that we differentiate ourselves from our competitors because of the technological advantages of our proprietary tools, the quality and reliability of our products, our responsive service, and our manufacturing flexibility to rapidly respond with products that meet the most demanding needs of our customers.

Cutting-edge manufacturing capability and proprietary technologies. We have created and designed a cutting-edge machining facility with custom features. We recruited and hired a high level, cross-industry machining team to design and manufacture our products using a suite of highly technical, computer controlled, purpose-built equipment, much of which we design and manufacture for our proprietary use. Most of our manufacturing equipment and products now use advanced technologies that enable us to increase efficiency, enhance the integrity of precision drill bit and drill string tools that we manufacture and improve safety.

Industry-recognized expertise and innovation. We believe that we have developed a strong reputation for producing quality products and services based upon our industry-recognized depth of experience, ability to attract and retain quality employees, and innovative processes and applications. We believe that several of the drill bit refurbishing processes and technologies that we developed have raised industry standards.

Experienced management team with proven track record. Our executive officers and senior operational managers have extensive experience both with us and in the oilfield service industry generally. Our chief executive officer and co-founder, Troy Meier, has a 33-year relationship with Baker Hughes, providing innovative ideas to support Baker Hughes in maintaining their leadership role in the drill bit industry. Meier family entities continue to be a significant shareholder of our outstanding stock which we believe aligns their interests with the interests of our public investors.

Competition

Drill Bit Refurbishing.The primary competitors for our drill bit refurbishing services are the in-house units at Hughes Christensen, the division of Baker Hughes responsible for drill bits. Other drill bit manufacturers also have in-house refurbishing units but theyand are notnow competitors given the removal of the exclusivity clause under our competitors because of our exclusive contract with Baker Hughes.

Drilling Enhancement Tools. The primary competitors for our Drill-N-Ream tool are several single-section reaming tool manufacturers, including Baker Oil Tools (a division of Baker Hughes), NOV, Schlumberger and Schlumberger.Tercel, and one dual-section reaming tool manufactured by Stabil Drill (which is the subject of the lawsuit described in Item 3). We believe that the Drill-N-Ream tool is the only patented dual-section or dual cutting structure drill string reamer on the market today. We believe that distinction will allow us to continue building on the Drill-N-Ream tool’s first-mover advantage.

We believe that our Strider technology is at the forefront of drill string tool technological development for horizontal drilling. There are existing tools that would compete with the Open Hole drill string stimulation tool,our Strider technology, such as the Agitator tool marketed by NOV. However, we believe our Strider technology in the drill string stimulation tool offers significant advantages over the Agitator and we believe our Strider technology will be rapidly accepted in the drilling market.tool.

Customers

Customers

Distributor/Agent Relationships and Customer Diversification. In 2016, we entered into an agreement with Baker Hughes to be a market channel partner for new customers of our Strider technology, specifically the Open Hole Strider. We engaged with DTI in May 2016 to be the exclusive distributor of the Drill-N-Ream in the United States and Canada onshore and offshore markets. We are also working on additional prospective channel partners, including Weatherford for the Middle East market and for the CTS. While our direct customers are limited and ourOur customer concentration of revenue is high,dependent upon a limited number of customers. For the usersyears ended December 31, 2022 and 2021, two customers represented 88% and 87% of our patented technologies continues to increase and represent leading oil and gas producerstotal revenue, respectively.

Manufacturing

We manufacture our solutions, as well as custom products, in North America. Our manufacturing technologies operations also provide us diversification opportunities asour state-of-the-art drill tool fabrication facility where we can custom create manufacturing designs and build prototypes for our customers’ new technologies under development.

Drill Bit Refurbishing.Our sole customer for ouroperate a technologically advanced PDC drill bit refurbishing services is Hughes Christensen,facility, as well as a state-of-the-art, high-tech drilling and completion tool engineering design and manufacturing operation. We manufacture our drill string enhancement tools, including the division of Baker Hughes responsible for drill bits, underpatented Drill-N-Ream tool and the patented Strider technology, and conduct our exclusive long-term contractnew product research and development from this facility.

We employ a senior work force with them. Our current agreement with Baker Hughes regardingspecialized training and extensive experience related to drill bit refurbishment has been extended until March 31, 2018. We are currently negotiating an agreement renewal with Baker Hughes that is expected to replace the existing agreement. We work directly with their field engineers, manufacturingrefurbishing and marketing representatives to develop newdrill and completion tool manufacturing. They produce our products and enhancements,services using a suite of highly technical, purpose-built equipment, much of which we design and manufacture for our proprietary use. Our manufacturing equipment and products use advanced technologies that enable us to increase efficiency, enhance product integrity, improve efficiency and safety, and solve complex drilling tool problems.

Drilling Enhancement Tools. E&P operators, other oil field services companiesIn December 2020, we were awarded the AS9100D with ISO 9001:2015 certification for our quality management systems (QMS) and distributors are demanding key technologies, such as advanced directional drillingfor meeting QMS requirements specific to the aviation, space and more complex completion systems in order to reduce costs resource requirements and tie to production. defense industries. To date we have maintained our certification.

We believe that there will be significant opportunitieswe can leverage our certification as well as our precision machining and manufacturing expertise to bring newproduce other products for customers in a variety of industries.

Cyclicality

We are substantially dependent on conditions in the oil and gas industry, including the level of exploration, development and production activity of, and the corresponding capital spending by, oil and natural gas companies.

The level of exploration, development and production activity is directly affected by trends in oil and natural gas prices, which have historically been volatile, and by capital spending discipline imposed by customers.

Inflationary and/or recessionary factors relating to the oil and gas industry may directly affect the Company’s operations. The increased demand for oil and gas production has benefited the Company’s operations. The Company is not immune to the effects of inflation on its labor requirements, supply chain and costs of revenues.

The Russia – Ukraine conflict is a global concern. The Company does not have any direct exposure to Russia or Ukraine through its operations, employee base, investments or sanctions. The Company does not receive goods or services sourced from those countries, does not anticipate any disruption in its supply chain and has no business relationships, connections to or assets in Russia, Belarus or Ukraine. No impairments to assets have been made due to the conflict. The global oil industry has been impacted by this situation, but the Company’s operations and business in the Middle East has not been disrupted to date. The increase in oil producing activities in the United States has benefitted the Company’s operations.

Declines in oil and gas prices could negatively affect the level of these activities and capital spending, which could adversely affect demand for our products and equipmentservices and, in certain instances, result in the cancellation, modification or rescheduling of existing and expected orders and the ability of our customers to market, such aspay us for our Drill-N-Ream toolproducts and Strider technology,services. These factors could have an adverse effect on our revenue and profitability. Conversely, increases in oil and gas prices could positively affect production activities and capital spending, which have been designedcould positively affect demand for our products and engineered with these new challenges in mind.services.

Seasonality

Seasonality

A substantial portion of ourOur business is not significantly impacted by changing seasons.seasonality, although our fourth quarter has historically been negatively impacted by holidays and our clients’ budget cycles. A small portion of the revenue we generate from selected operations may benefit from higher first quarter activity levels, as operators take advantage of the winter freeze to gain access to remote drilling and production areas. In the past, some of our revenue in Alaska and Canada has declined during the second quarter due to warming weather conditions that resulted in thawing, softer ground, difficulty accessing drill sites and road bans that curtailed drilling activity.

Environmental, Health and Safety Regulation

Our operations are subject to numerous stringent and complex laws and regulations governing the discharge of materials into the environment, health and safety aspects of our operations, or otherwise relating to human health and environmental protection, and we have put a strong focus on these issues.

We designed and built our Vernal facility as a fully-contained business park, except for the city sewer connection. Underlying our entire facility, including parking lots and runoff storage areas, is a complete capture and containment field that collects all building drainage and ground run off in isolated tanks. Captured drainage and runoff, as well as all hazardous waste generated in our manufacturing processes is regularly removed from our facility by a certified hazardous waste disposal company. However, the trend in environmental regulation has been to impose increasingly stringent restrictions and limitations on activities that may impact the environment, and thus, anyAny changes in environmental laws and regulations or in enforcement policies that result in more stringent and costly waste handling, storage, transport, disposal, or remediation requirements could have a material adverse effect on our operations and financial position. Moreover, accidental releases or spills of regulated substances may occur in the course of our operations, and we cannot assure you that we will not incur significant costs and liabilities as a result of such releases or spills, including any third-party claims for damage to property, natural resources or persons. Failure to comply with these laws or regulations or to obtain or comply with permits may result in the assessment of administrative, civil and criminal penalties, imposition of remedial or corrective action requirements, and the imposition of orders or injunctions to prohibit or restrict certain activities or force future compliance.

The following is a summary of the more significant existing environmental, health and safety laws and regulations to which our business operations are subject and for which compliance could have a material adverse impact on our capital expenditures, results of operations or financial position.

Hazardous Substances and Waste. The Resource Conservation and Recovery Act (“RCRA”) and comparable state statutes, regulate the generation, transportation, treatment, storage, disposal and cleanup of hazardous and non-hazardous wastes. Under the auspices of the EPA, the individual states administer some or all of the provisions of RCRA, sometimes in conjunction with their own, more stringent requirements. We are required to manage the transportation, storage and disposal of hazardous and non-hazardous wastes in compliance with RCRA.RCRA and its state counterparts.

The Comprehensive Environmental Response, Compensation, and Liability Act (“CERCLA”), also known as the Superfund law, imposes joint and several liability, without regard to fault or legality of conduct, on classes of persons who are considered to be responsible for the release of a hazardous substance into the environment. These persons include the owner or operator of the site where the release occurred, and anyone who disposed or arranged for the disposal of a hazardous substance released at the site. We currently own, lease, or operate numerous properties that have been used for manufacturing and other operations for many years. We also contract with waste removal services and landfills. These properties and the substances disposed or released on them may be subject to CERCLA, RCRA and analogous state laws. Under such laws, we could be required to remove previously disposed substances and wastes, remediate contaminated property, or perform remedial operations to prevent future contamination. In addition, it is not uncommon for neighboring landowners and other third parties to file claims for personal injury and property damage allegedly caused by hazardous substances released into the environment.

Water Discharges. The Federal Water Pollution Control Act (the “Clean Water Act”) and analogous state laws impose restrictions and strict controls with respect to the discharge of pollutants, including spills and leaks of oil and other substances, into waters“Waters of the United States.States,” including wetlands. The discharge of pollutants into regulated waters is prohibited, except in accordance with the terms of a permit issued by the EPA or an analogous state agency. A responsible party includes the owner or operator of a facility from which a discharge occurs. The Clean Water Act and analogous state laws provide for administrative, civil and criminal penalties for unauthorized discharges and, together with the Oil Pollution Act of 1990, impose rigorous requirements for spill prevention and response planning, as well as substantial potential liability for the costs of removal, remediation, and damages in connection with any unauthorized discharges. Further, proposed revisions to the definition of “Waters of the United States” have been subject to judicial challenges and administrative action, resulting in uncertainty as to the scope of the regulatory definition. Our obligations under the Clean Water Act could be expanded when the definition of “Waters of the United States” is ultimately resolved.

Employee Health and Safety. We are subject to a number of federal and state laws and regulations, including OSHA and comparable state statutes, establishing requirements to protect the health and safety of workers. In addition, the OSHA hazard communication standard, the EPA community right-to-know regulations under Title III of the federal Superfund Amendment and Reauthorization Act and comparable state statutes require that information be maintained concerning hazardous materials used, stored, produced or producedreleased in our operations and that this information be provided to employees, state and local government authorities and the public. Substantial fines and penalties can be imposed and orders or injunctions limiting or prohibiting certain operations may be issued in connection with any failure to comply with laws and regulations relating to worker health and safety.

In addition, on January 20, 2021, the Biden Administration came into office and immediately issued a number of executive orders related to environmental matters that could affect our operations and those of our customers, including an Executive Order on “Protecting Public Health and the Environment and Restoring Science to Tackle the Climate Crisis” seeking to adopt new regulations and policies to address climate change and suspend, revise, or rescind, prior agency actions that are identified as conflicting with the Biden Administration’s climate policies. The Biden Administration has also issued other orders that could ultimately affect our business and the business of our customers, such as the executive order rejoining the Paris Agreement, and could seek, in the future, to put into place additional executive orders, policy and regulatory reviews, and seek to have Congress pass legislation that could adversely affect the production of oil and gas assets and our operations and those of our customers. New legislation, regulations or international agreements in the future could result in increased costs to operate and maintain our facilities, capital expenditures to install new emission controls at our facilities, and costs to administer and manage any potential greenhouse gas emissions or carbon trading or tax programs. These costs and capital expenditures could be material. Although the Company has not incurred additional costs due to new policies to date, these developments could increase our costs, reduce the demand for crude oil and condensate, NGLs, and natural gas, and create delays in our obtaining air pollution permits for new or modified facilities.

Insurance and Risk Management

We maintain insurance coverage of types and amounts that we believe to be customary and reasonable for companies of our size and with similar operations. In accordance with industry practice, however, we do not maintain insurance coverage against all of the operating risks to which our business is exposed. Therefore, there is a risk our insurance program may not be sufficient to cover any particular loss or all losses.

Currently, our insurance program includes, among other things, general liability, umbrella liability, sudden and accidental pollution, personal property, vehicle, workers’ compensation, directors and officers and employer’s liability coverage. Our insurance includes various limits and deductibles or retentions, which must be met prior to or in conjunction with recovery.

EmployeesHuman Capital Resources

As of December 31, 2017,2022, we had 5486 full-time compared with 58 full-time employees compared with 43 full-time employees at the same time inas of December 2016.31, 2021. We generally have been able to locatenever had a work stoppage, and engage highly qualified employees as needed. Nonenone of our employees are coveredrepresented by an ongoing collective bargaining agreement, and we have experienced no work stoppages.a labor union. We consider our employee relations with our employees to be good.

Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, incentivizing and integrating our current and future employees. We encourage and support the growth and development of our employees. Continual learning and career development is advanced through ongoing performance and development conversations with employees, and reimbursement is available to employees for seminars, conferences, formal education and other training events employees attend in connection with their job duties.

Our core values of accountability, openness and integrity underscore everything we do and drive our day-to-day interactions. The safety, health and wellness of our employees is a top priority.

Available Information

We are required to file annual, quarterly and current reports, proxy statements and certain other information with the SEC. The SEC maintains a website at www.sec.gov that contains reports, proxy and information statements and other information regarding registrants that file electronically with the SEC. Any documents filed by us with the SEC, including this Annual Report, can be downloaded from the SEC’s website at www.SEC.gov.

Our principal executive offices are located at 1583 South 1700 East, Vernal, Utah, 84078, and our telephone number at that address is (435) 789-0594. Our website address is www.sdpi.com. Our periodic reports and other information filed with or furnished to the SEC are available, free of charge, through our website, as soon as reasonably practicable after those reports and other information are electronically filed with or furnished to the SEC. Information on our website or any other website is not incorporated by reference into this Annual Report and does not constitute a part of this Annual Report.

ITEM 1A. Risk Factors

Risks Related to Our Business and Industry

A decline in expenditures by the oil and gas industry could impact our revenue and income and result in an impairment of our assets.

Our business depends upon the condition of the oil and gas industry and, in particular, the willingness of oil and gas companies to make capital expenditures on exploration and development, drilling and production operations. The level of capital expenditures is generally dependent on the prevailing view of future oil and gas prices, which are influenced by numerous factors affecting the supply and demand for oil and gas, including:

We expect continued volatility in both crude oil and natural gas prices, as well as in the level of drilling and production related activities. Even during periods of high prices for oil and natural gas, companies exploring for oil and gas may cancel or curtail programs, seek to renegotiate contract terms, including the price of our products and services, or reduce their levels of capital expenditures for exploration and production for a variety of reasons. These risks are greater during periods of low or declining commodity prices. Continued significant or prolonged declines in hydrocarbon prices have had, and may continue to have, a material adverse effect on our results of operations.

We may be unable to maintain adequate liquidity and make payments on our debt.

At December 31, 2017,2022, we had a working capital deficit of approximately $1,300,000. The Company’s manufacturing facility is financed by a commercial bank mortgage loan with principal of $4,200,000 due August 15, 2018. The classification of this debt from long-term to short-term resulted in a working capital deficit at December 31, 2017. The Company plans to work with its lender to refinance its commercial bank loan in the first half of 2018.

On September 30, 2016, we priced a public offering of common stock at $1.00 per share. The transaction closed on October 5, 2016. Net of underwriting and stock offering expenses of approximately $709,000, proceeds to the Company were approximately $5.0 million. The Company used the proceeds to pay off a $1 million Bridge Financing completed on August 5, 2016, and the $868,000 indebtedness on our $3 million credit facility with Federal National Commercial Credit (“FNCC”) as well as for general corporate purposes, including working capital. Our principal uses of cash are operating expenses, working capital requirements, capital expenditures and debt service payments.

On August 10, 2016, certain of our subsidiaries entered into an amended and restated note with the seller in our acquisition of Hard Rock Solutions, LLC. As amended and restated, the Hard Rock Note accrues interest at 5.75% per annum and matures on January 15, 2020. In 2016, we paid interest of $769,582 and a principal payment of $2,000,000, of which $1,000,000 was paid with 700,000 restricted shares of common stock on August 10, 2016 (having an agreed per share value of $1.43). During the year ending December 31, 2017, we paid interest of $515,452 and made an advanced principal payment of $500,000. Subsequent to year end, we made the accrued interest payments related to the note on January 15, 2018 of $70,890 and made a $500,000 principal payment. The following remaining payments are required under the current terms of the Hard Rock note: in 2018, $500,000 in principal plus accrued interest is due and payable on each of May 15 and July 15, 2018. In 2019, $1,000,000 in principal plus accrued interest on each of January 15, March 15, May 15 and July 15, 2019. The remaining balance of principal of $2,000,000 and accrued interest on the Hard Rock Note are due on January 15, 2020.

$4,457,000. Our principal uses of cash are operating expenses, working capital requirements, capital expenditures and debt service payments. Our operational and financial strategies include lowering our operating costs and capital spending to match revenue trends, managing our working capital and debt to enhance liquidity. For example, to conserve cash, we implemented a salary for stock options program during the first quarter of 2016 for senior management and our board of directors. With the success we are having with our distributor agreement with DTI and the opportunity with our new OHS and CTS tool,

While we believe we should havethat our borrowing capacity and cash generated from operations will be sufficient capital to supportfund our opportunities in 2018.

Ouroperations for 2023, our operational and financial strategies include managing our operating costs, working capital and debt to enhance liquidity. We will continueexpect to work to grow revenue and review additional cost containment measures and be cash flow positive in 2018.2023. If we are unable to do this, and successfully refinance our commercial bank loan that is collateralized by our property, we may not be able to, among other things, (i) maintain our current general and administrative spending levels; (ii) fund certain obligations as they become due; and (iii) respond to competitive pressures or unanticipated capital requirements. We cannot provide any assurance that financing will be available to us in the future on acceptable terms.

Failure to generate sufficient revenueOur Credit Agreement (as defined below) provides a $4,300,000 credit facility. If we are unable to make payments on the Hard Rock Note could result in our loss of the patents securing such note.

The Hard Rock Note is secured by all of the patents, patents pending, other patent rights, and the Drill-N-Ream trademark purchased in the Hard Rock acquisition (the “Drill-N-Ream Collateral”). If we do not have the funds necessary to make the futurerequired payments under the Hard Rock Note and failCredit Agreement, we would be in default thereunder, which would permit the holders of the indebtedness to make any payments as required thereunder, andaccelerate the maturity thereof, unless we are unsuccessful in amendingable to obtain, on a timely basis, a necessary waiver or restructuringamendment. Any waiver or amendment may require us to revise the terms of the Credit Agreement which could increase the cost of our borrowings, require the payment terms,of additional fees, and adversely impact the holderresults of our operations. Upon the Hard Rock Noteoccurrence of any event of default that is not waived, the lenders could conduct a foreclosure sale onelect to exercise any of their available remedies, which include the Drill-N-Ream Collateralright to not lend any additional amounts or, in orderthe event we have outstanding indebtedness under the Credit Agreement, to applydeclare any outstanding indebtedness, together which any accrued interest and other fees, to be immediately due and payable. If we are unable to repay the proceeds thereof toward repayment ofoutstanding indebtedness, if any, under the Hard Rock Note and all foreclosure costs, and our subsidiary Superior Drilling Solutions, LLCCredit Agreement when due, the lenders would be liable for any shortfall or receive any excess from the sales proceeds. The failurepermitted to retainproceed against their collateral, and use the Drill-N-Ream Collateral in our businessthis could cause a significant loss of our investment and might have a material adverse effect on our business and financial condition and results of operation, as well as our ability to grow our drill string tool business.condition.

Our level of indebtedness could adversely affect our future ability to raise additional capital to fund growth, limit our ability to react to changes in our business or our industry and place us at a competitive disadvantage.

We are required to make remaining payments on the Hard Rock Note of $1.0 million (plus accrued interest) in 2018 and $4.0 million (plus accrued interest) for 2019, with the balance of $2.0 million due on maturity in January 2020. We have a commercial bank loan with principal of $4,200,000 due in August 2018. We plan to refinance the loan in the first half of 2018. In addition, we are required to make monthly payments of approximately $68,000 on our other indebtedness.

Our level of debt and debt service requirements could have important consequences. For example, it could (i) result in a foreclosure upon our key assets, (ii) increase our vulnerability to general adverse economic and industry conditions, (iii) limit our ability to fund future capital expenditures and working capital, to engage in future acquisitions or development activities, or to otherwise realize the value of our assets and opportunities fully because of the need to dedicate a substantial portion of our cash flow from operations to payments on our debt, (iv) increase our cost of borrowing, (v) restrict us from making strategic acquisitions or causing us to make non-strategic divestitures, (vi) limit our flexibility in planning for, or reacting to, changes in our business or industry in which we operate, placing us at a competitive disadvantage compared with our competitors who are less leveraged and (vii) impair our ability to obtain additional financing in the future.

There may be significant annual and quarterly fluctuations in our operating results.

Significant annual and quarterly fluctuations in our results of operations may be caused by, among other factors, our volume of revenue, the timing of new product or service announcements, releases by us and our competitors in the marketplace of new products or services, seasonality and general economic conditions. There can be no assurance that the level of revenue achieved by us in any particular fiscal period will not be significantly lower than in other comparable fiscal periods. We believe quarter-to-quarter comparisons of our revenue and operating results are not necessarily meaningful and should not be relied on as indicators of future performance. Our operating expenses are relatively fixed in the short term and are based on management’s expectations of future revenue. As a result, if future revenue is below expectations, net income or loss may be disproportionately affected by a reduction in revenue, as any corresponding reduction in expenses may not be proportionate to the reduction in revenue. Our revenue could also be impacted by inflationary and/or recessionary factors relating to the oil and gas industry that may directly affect the Company’s operations or the Russia – Ukraine conflict.

Our customer base is concentrated and the loss of, or nonperformance by, one or more of our significant customers could cause our revenue to decline substantially.

We had two large customers that comprised 97%88% of our total revenue in 2017.2022 and 87% in 2021. It is likely that we will continue to derive a significant portion of our revenue from a relatively small number of customers in the future. If a major customer decided not to continue to use our services or has a significant reduction in its business, our revenue would decline, and our operating results and financial condition could be harmed. In addition, we are subject to credit risk due to the concentration of our customer base. Any increase in the non-payment of and non-performance by our counterparties, either as a result of changes in financial and economic conditions or otherwise, could have a material effect on our business, results of operations and financial condition and could adversely affect our liquidity.

We must continue to develop new technologies, methodologies and products on a timely and cost-effective basis to satisfy the needs of our customers.

The drilling industry is driven primarily by cost minimization, and our strategy is aimed at reducing drilling costs through the application of new drill bit assembly and drill string tool technologies. Our continued success will depend on our ability to meet our customers’ changing needs, on a timely and cost-effective basis, by successfully enhancing our current products and processes; developing, producing and marketing new products and processes; and responding to evolving industry standards and other technological changes.

We cannot assure you that our products will be able to satisfy the specifications of our customers or that we will be able to perform the testing necessary to prove that the product specifications are satisfied in the future, or that the costs of modifications to our products to satisfy their requirements will not adversely affect our results of operations. FailureWe believe our Strider technology for horizontal drilling offers advantages compared to competition, but failure to meet our customer’s demand for services may adversely affect our business. We may encounter resource constraints, competition, or other difficulties that may delay our ability to expand our bit remanufacturing services to the level desired or required by our customer. If our products are unable to satisfy such requirements, or we are unable to perform any required testing, our customers may cancel their contracts and/or seek new suppliers, and our business, results of operations, cash flows or financial position may be adversely affected.

Our related party transactions with the Meiers and their affiliated entities may cause conflicts of interests that may adversely affect us.

We have entered into, and may, in the future, enter into various transactions and agreements with the Meiers and their affiliated entities. We believe that the transactions and agreements that we have entered into with the Meiers are on terms that are at least as favorable as could reasonably have been obtained at such time from third parties. However, these relationships could create, or appear to create potential conflicts of interest when our board of directors is faced with decisions that could have different implications for us and the Meiers or their affiliates. The appearance of conflicts, even if such conflicts do not materialize, might adversely affect the public’s perception of us, as well as our relationship with other companies and our ability to enter into new relationships in the future, which may have a material adverse effect on our ability to do business.

Our customers’ industries are undergoing continuing consolidation that may impact our results of operations.

The oil and gas industry is rapidly consolidating and, as a result, some of our largest customersend users of our product have consolidated and are using their size and purchasing power to seek economies of scale and pricing concessions. This consolidation may result in reduced capital spending by some of our customers or the acquisition of one or more of our primary customers, which may lead to decreased demand for our products and services. We cannot assure you that we will be able to maintain our level of sales to a customer that has consolidated or replace that revenue with increased business activity with other customers. As a result, the acquisition of one or more of our primary customers, such as Baker Hughes and DTI, may have a significant negative impact on our results of operations, financial position or cash flows. We are unable to predict what effect consolidations in the industry may have on price, capital spending by our customers, our market share and selling strategies, our competitive position, our ability to retain customers or our ability to negotiate favorable agreements with our customers.

We may be unable to successfully compete with other manufacturers of drilling equipment.

Several of our competitors are diversified multinational companies with substantially larger operating staffs and greater capital resources than ours and which have been engaged in the manufacturing business for a much longer time than us. If these competitors substantially increase the resources they devote to developing and marketing competitive products and services, we may not be able to compete effectively. Similarly, consolidation among our competitors could enhance their competing market share, product and service offerings and financial resources, further intensifying competition.

We are dependent on key personnel who may be difficult to replace.

Our success is dependent to a significant degree upon the business expertise and continued contributions of our founders and senior management team. In particular, we are dependent upon the efforts and services of our founders, Mr. Troy Meier, our Chairman and Chief Executive Officer (“CEO”), and Ms. Annette Meier, our President and Chief Operating Officer (“COO”), because of their knowledge, experience, skills, and relationships with major clients and the other members of our management team. Our future success also depends on our ability to identify, attract, hire, train, retain and motivate other highly skilled technical, managerial, marketing and customer service personnel. Competition for such personnel in is intense, and we cannot assure you that we will be able to successfully attract, integrate or retain sufficiently qualified personnel. Our inability to retain these types of individuals could have a material adverse effect on our business, results of operations and financial condition.

Increases in the cost of raw materials used in our manufacturing processes could negatively impact our profitability.

We rely on the availability of volume and quality of synthetic diamond cutters for both our drill bit refurbishment and manufacturing business and for our drill string tool manufacturing business. In addition, we must have a reliable source of steel available for our manufacturing business which is both of sufficient quality, and available at a cost-effective price. We do not have fixed price contracts or arrangements for all of the raw materials and other supplies that we purchase. Baker Hughes provides the diamond cutters for our drill bit refurbishment business.refurbishment. However, sourcing cost-effective supplies of quality steel in the relatively low volumes that our tool manufacturing requires can be challenging. Shortages of, and price increases for, steel and other raw materials and supplies that we use in our business may occur. Future shortages or price fluctuations in synthetic diamond cutters or steel could have a material adverse effect on our ability to conduct either our drill bit refurbishment or our drill tool manufacturing business or our new drill tools in a timely and cost effectivecost-effective manner.

We depend on third-party suppliers for timely deliveries of raw materials, and our results of operations could be adversely affected if we are unable to obtain adequate supplies in a timely manner.

Our manufacturing operations depend upon obtaining adequate supplies of raw materials from third parties. Events beyond our control may impact the ability of these third parties to deliver raw materials may be affected by events beyond our control.materials. Any interruption in the supply of raw materials needed to manufacture our products could adversely affect our business, results of operations and reputation with our customers.

We may be exposed to unforeseen risks in our product manufacturing and processes which could adversely affect our financial conditions and results of operations.

We operate our business from our Vernal, Utah manufacturing facilities.headquarters. A natural disaster, extended utility failure or other significant event at our facility could significantly affect our ability to manufacture sufficient quantities of key products or otherwise deliver products to meet customer demand or contractual requirements which may result in a loss of revenue and other adverse business consequences. In addition, the equipment and management systems necessary for our operations are subject to wear and tear, break down and obsolescence, which could cause them to perform poorly or fail, resulting in fluctuations in manufacturing efficiencies and production costs. Significant manufacturing fluctuations may affect our ability to deliver products to our customers on a timely basis and we may suffer financial penalties and a diminution of our commercial reputation and future product orders. Additionally, some of our business may in the future be conducted under fixed price contracts. Fluctuations in our manufacturing process, or inaccurate estimates and assumptions used in pricing our contracts, even if due to factors out of our control, may result in cost overruns which we may be required to absorb. Any shut down of our manufacturing facility, reductions in our manufacturing process or efficiency, or cost overruns could adversely affect our business, financial condition and results of operations.

Our operating history may not be sufficient for investors to evaluate our business and prospects.

We are a recently formed company with a short operating history. This may make it more difficult for investors to evaluate our business and prospects and to forecast our future operating results. As a result, historical financial data may not give you an accurate indication of what our actual results would have been if subsequent acquisitions had been completed at the beginning of the periods presented or of what our future results of operations are likely to be. Our future results will depend on our ability to efficiently manage our operations and execute our business strategy.

We may be unable to employ enough skilled and qualified workers to sustain or expand our current operations.

Our operations require personnel with specialized skills and experience. The supply of skilled and experienced personnel may not be sufficient to meet current or expected demand. Any significant increase in the wages paid by competing employers could result in a reduction of our skilled labor force, increases in the wage rates that we must pay, or both. If any of these events were to occur, our capacity could be diminished, our ability to respond quickly to customer demands or strong market conditions may be inhibited and our growth potential impaired, any of which could have a material adverse effect on our business, financial condition and results of operations.

If we are not able to manage our growth strategy successfully, our business, and results of operations may be adversely affected.

Our growth strategy includes acquisitions and the development and implementation of new product designs and improvements, which presents numerous managerial, administrative, operational, and other challenges. Our ability to manage the growth of our operations will depend on our ability to develop systems and services and related technologies to meet evolving industry requirements and at prices acceptable to our customers to compete in the industry in which we operate. Our ability to compete effectively will also depend on our ability to continue to obtain patents on our proprietary technology and products. Although we do not consider any single patent to be material to our business, the inability to protect our future innovations through patents could have a material adverse effect. In addition, our growth will increase our need to attract, develop, motivate, and retain both our management and professional employees. The inability of our management to manage our growth effectively or the inability of our employees to achieve anticipated performance could have a material adverse effect on our business.

Acquisitions and investments may not result in anticipated benefits and may present risks not originally contemplated, which could have a material adverse effect on our financial condition, results of operations and cash flows.

Our growth strategy includes acquiring other companies that complement our service offerings or broaden our technical capabilities and geographic presence. From time to time, we evaluate purchases and sales of assets, businesses or other investments. These transactions may not result in the anticipated realization of savings, creation of efficiencies, offering of new products or services, generation of cash or income or reduction of risk. In addition, acquisitions may be financed by borrowings, requiring us to incur debt, or by the issuance of our common stock. These transactions involve numerous risks, and we cannot ensure that:

Our inability to integrate acquisitions successfully could impede us from realizing all of the benefits of the acquisitions which could have a material adverse effect on our financial condition and results of operations.

If we are unable to successfully integrate future acquisitions, we could be impeded from realizing all of the anticipated benefits of those acquisitions and could weaken our business operations. The integration process may disrupt our business and, if implemented ineffectively, may preclude realization of the anticipated benefits expected by us and could harm our results of operations. In addition, the overall integration of the combining companies may result in unanticipated problems, expenses, liabilities and competitive responses, and may cause our stock price to decline. The difficulties of integrating an acquisition include, among others:

Even if the operations of an acquisition are integrated successfully, we may not realize the anticipated benefits of the acquisition, including the synergies, cost savings or growth opportunities that we expect. These benefits may not be achieved within the anticipated time frame, or at all. Failing to realize the benefits could have a material adverse effect on our financial condition and results of operations.

Conditions in the global financial system may have impacts on our business and financial position that we currently cannot predict.

Uncertainty in the credit markets may negatively impact the ability of our customers to finance purchases of our products and services and could result in a decrease in, or cancellation of, orders or adversely affect the collectability of our receivables. If the availability of credit to our customers is reduced, they may reduce their drilling and production expenditures, thereby decreasing demand for our products and services, which could have a negative impact on our financial position. Additionally, unsettled conditions could have an impact on our suppliers, causing them to be unable to meet their obligations to us. Although we do not currently anticipate a need to access the credit markets in the short term, a prolonged constriction on future lending by banks or investors could result in higher interest rates on future debt obligations or could restrict our ability to obtain sufficient financing to meet our long-term operational and capital needs.

In addition, the global financial system may be impacted by the effects of global health epidemics and concerns of turmoil and military actions. Weakness or deterioration of the global economy could reduce our customers’ spending levels and could impact our revenues and operating results. We are unable to predict the effect of this on our business and results of operations.

A terrorist attack or armed conflict could harm our business.

Terrorist activities, anti-terrorist efforts and other armed conflicts involving the United States or other countries may adversely affect the United States and global economies and could prevent us from meeting our financial and other obligations. If any of theseThe events occur,in Russia and surrounding areas and the resultinghistoric volatility in the Middle East may result in political instability and societal disruption could reduce overall demand for oil and natural gas, potentially putting downward pressure on demand for our services and causing a reduction in our revenue. Oil and natural gas related facilities could be direct targets of terrorist attacks, and our operations could be adversely impacted if infrastructure integral to our customers’ operations is destroyed or damaged. Costs for insurance and other security may increase as a result of these threats, and some insurance coverage may become more difficult to obtain, if available at all.

Materials and minerals used in our manufacturing process may become subject to laws and regulations that may expose us to significant costs and liabilities.

The diamonds comprising the diamond cutting discs used in our operations are synthetic and manufactured in the United States, South Africa and China. Neither those diamond cutters nor any other minerals used in our operations are currently identified as “conflict minerals” in the Dodd-Frank Wall Street Reform and Consumer Protection Act. However, we cannot predict or control if the United States Secretary of State will or will not identify one of the minerals used in our manufacturing process as a conflict mineral. Should the materials used in our manufacturing process be designated as a conflict mineral, we will be required to file Form SD with the SEC and conduct the required diligence to determine the source of the conflict mineral in connection with such disclosure. Any increased costs and expenses associated with this could have a material adverse impact on our financial condition and results of operations.

The use and protection of our proprietary technology will affect our success. There are limitations to our intellectual property rights in our proprietary technology, and thus our right to exclude others from the use of such proprietary technology.

Our success will be affected by our development and implementation of new product designs and improvements and by our ability to protect and maintain critical intellectual property assets related to these developments. Although in many cases our products are not protected by any registered intellectual property rights, in other cases we rely on a combination of patents and trade secret laws to establish and protect this proprietary technology.

We currently hold multiple U.S. patents and have multiple pending patent applications for products and processes in the U.S. and certain non-U.S. countries. Patent rights give the owner of a patent the right to exclude third parties from making, using, selling, and offering for sale the inventions claimed in the patents in the applicable country. Patent rights do not necessarily grant the owner of a patent the right to practice the invention claimed in a patent, but merely the right to exclude others from practicing the invention claimed in the patent. It may also be possible for a third party to design around our patents. Furthermore, patent rights have strict territorial limits. Some of our work will be conducted in international waters and therefore may not fall within the scope of any country’s patent jurisdiction. We may not be able to enforce our patents against infringement occurring in international waters and other “non-covered” territories. Also, we do not have patents in every jurisdiction in which we conduct business and our patent portfolio will not protect all aspects of our business and may relate to obsolete or unusual methods, which would not prevent third parties from entering the same market.

We attempt to limit access to and distribution of our technology by customarily entering into confidentiality and/or license agreements with our employees, customers and potential customers and suppliers. Our rights in our confidential information, trade secrets, and confidential know-how will not prevent third parties from independently developing similar information. Publicly available information (e.g. information in expired issued patents, published patent applications, and scientific literature) can also be used by third parties to independently develop technology. We cannot provide assurance that this independently developed technology will not be equivalent or superior to our proprietary technology.

Our competitors may infringe upon, misappropriate, violate or challenge the validity or enforceability of our intellectual property and we may not able to adequately protect or enforce our intellectual property rights in the future.

Our businesses and our customers’ businesses are subject to environmental laws and regulations that may increase our costs, limit the demand for our products and services or restrict our operations.

Our operations and the operations of our customers are also subject to federal, state, local and foreign laws and regulations relating to the protection of human health and the environment. These environmental laws and regulations affect the products and services we design, market and sell, as well as the facilities where we manufacture our products. For example, our operations are subject to numerous and complex laws and regulations that, among other things, may regulate the management and disposal of hazardous and non-hazardous wastes; require acquisition of environmental permits related to our operations; restrict the types, quantities and concentrations of various materials that can be released into the environment; limit or prohibit operation activities in certain ecologically sensitive and other protected areas; regulate specific health and safety criteria addressing worker protection; require compliance with operational and equipment standards; impose testing, reporting and record-keeping requirements; and require remedial measures to mitigate pollution from former and ongoing operations.operations at our facilities or at facilities where wastes generated by our operations have been disposed. Sanctions for noncompliance may include revocation of permits, corrective action orders, administrative or civil penalties or other enforcement, and criminal prosecution. We are required to invest financial and managerial resources to comply with such environmental, health and safety laws and regulations and anticipate that we will continue to be required to do so in the future. In addition, environmental laws and regulations could limit our customers’ exploration and production activities. These laws and regulations change frequently, which makes it impossible for us to predict their cost or impact on our future operations. For example, legislation to regulate emissions of greenhouse gases has been introduced in the U.S. Congress, and there has been a wide-ranging policy debate, both nationally and internationally, regarding the impact of these gases and possible means for their regulation. In addition, efforts have been made and continue to be made in the international community toward the adoption of international treaties or protocols that would address global climate change issues, such as the annual United Nations Climate Change Conferences. Also, the EPA has undertaken new efforts to collect information regarding greenhouse gas emissions and their effects. Following a finding by the EPA that certain greenhouse gases represent a danger to human health, the EPA has expanded its regulations relating to those emissions and has adopted rules imposing permitting and reporting obligations. The results of the permitting and reporting requirements could lead to further regulation of these greenhouse gases by the EPA. To date, there has been no significant legislative progress in cap and trade proposals or greenhouse gas emission reductions. The adoption of legislation or regulatory programs to reduce greenhouse gas emissions could also increase the cost of consuming, and thereby reduce demand for, the hydrocarbons that our customers produce. Consequently, such legislation or regulatory programs could have an adverse effect on our financial condition and results of operations. It is too early to determine whether, or in what form, further regulatory action regarding greenhouse gas emissions willmay ultimately be adopted or what specific impact a new regulatory action might have on us or our customers. Generally, the anticipated regulatory actions do not appear to affect us in any material respect that is different, or to any materially greater or lesser extent, than other companies that are our competitors. However, our business and prospects could be adversely affected to the extent laws are enacted or modified or other governmental action is taken that prohibits or restricts our customers’ exploration and production activities or imposes environmental protection requirements that result in increased costs to us or our customers.

Environmental laws may provide for “strict liability” for damages to natural resources or threats to public health and safety, rendering a party liable for environmental damage without regard to negligence or fault on the part of such party. Sanctions for noncompliance may include revocation of permits, corrective action orders, administrative or civil penalties, and criminal prosecution. Some environmental laws and regulations provide for joint and several strict liability for remediation of spills and releases of hazardous substances. In addition, we may be subject to claims alleging personal injury or property damage as a result of alleged exposure to hazardous substances, as well as damage to natural resources. These laws and regulations also may expose us to liability for the conduct of or conditions caused by others, or for our acts that were in compliance with all applicable laws and regulations at the time such acts were performed. Any of these laws and regulations could result in claims, fines or expenditures that could be material to results of operations, financial position and cash flows.

New government regulations could have an impact on our business and the business of our customers.

On January 20, 2021, the Biden Administration came into office and immediately issued a number of executive orders related to environmental matters that could affect our operations and those of our customers, including an Executive Order on “Protecting Public Health and the Environment and Restoring Science to Tackle the Climate Crisis” seeking to adopt new regulations and policies to address climate change and suspend, revise, or rescind, prior agency actions that are identified as conflicting with the Biden Administration’s climate policies. Among the areas that could be affected by the review are regulations addressing methane emissions and the part of the extraction process known as hydraulic fracturing. The Biden Administration has also issued other orders that could ultimately affect our business and the business of our customers, such as the executive order rejoining the Paris Agreement, and could seek, in the future, to put into place additional executive orders, policy and regulatory reviews, and seek to have Congress pass legislation that could adversely affect the production of oil and gas assets. However, the status of recent and future rules and rulemaking initiatives under the Biden Administration remains uncertain.

The increasing attention to global climate change risks has created the potential for the likelihood of private and public litigation and governmental investigations. Such actions would increase costs and adversely impact our business.

Our failure to implement and comply with our safety program could adversely affect our operating results or financial condition.

Our safety program is a fundamental element of our overall approach to risk management, and the implementation of the safety program is a significant issue in our dealings with our clients. Unsafe job sites and office environments have the potential to increase employee turnover, increase the cost of a project to our clients, expose us to types and levels of risk that are fundamentally unacceptable, and raise our operating costs. The implementation of our safety processes and procedures are monitored by various agencies and rating bureaus and may be evaluated by certain clients in cases in which safety requirements have been established in our contracts. If we fail to comply with safety regulations or maintain an acceptable level of safety at our facilities, we may incur fines, penalties or other liabilities, or may be held criminally liable. We may incur additional costs to upgrade equipment or conduct additional training, or otherwise incur costs in connection with compliance with safety regulations. Failure to maintain safe operations or achieve certain safety performance metrics could disqualify us from doing business with certain customers, particularly major oil companies.

Our products are used in operations that are subject to potential hazards inherent in the oil and gas industry and, as a result, we are exposed to potential liabilities that may affect our financial condition and reputation.

Our products are used in potentially hazardous drilling, completion and production applications in the oil and gas industry where an accident or a failure of a product can potentially have catastrophic consequences. Risks inherent to these applications, such as equipment malfunctions and failures, equipment misuse and defects, explosions, blowouts and uncontrollable flows of oil, natural gas or well fluids and natural disasters, on land or in deep water or shallow-water environments, can cause personal injury, loss of life, suspension of operations, damage to formations, damage to facilities, business interruption and damage to or destruction of property, surface water and drinking water resources, equipment and the environment. In addition, we provide certain services that could cause, contribute to or be implicated in these events. If our products or services fail to meet specifications or are involved in accidents or failures, we could face warranty, contract or other litigation claims, which could expose us to substantial liability for personal injury, wrongful death, property damage, loss of oil and gas production, and pollution and other environmental damages. Our insurance policies may not be adequate to cover all liabilities. Further, insurance may not be generally available in the future or, if available, insurance premiums may make such insurance commercially unjustifiable. Moreover, even if we are successful in defending a claim, it could be time-consuming and costly to defend.

In addition, the frequency and severity of such incidents could affect operating costs, insurability and relationships with customers, employees and regulators. In particular, our customers may elect not to purchase our products or services if they view our safety record as unacceptable, which could cause us to lose customers and substantial revenue. In addition, these risks may be greater for us because we may acquire companies that have not allocated significant resources and management focus to quality, or safety requiring rehabilitative efforts during the integration process. We may incur liabilities for losses associated with these newly acquired companies before we are able to rehabilitate such companies’ quality, safety and environmental programs.

We previously experienced a material weakness in our internal controls over financial reporting.

In connection with the December 31, 2016 audit of our financial statements, we identified a material weakness in our internal control over financial reporting. A “material weakness” is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. The material weakness related to a deficiency in the design and operating effectiveness of our internal controls over financial reporting and our ability to prepare financial statements and disclosures, and a lack of accounting expertise to appropriately apply GAAP for complex and non-routine transactions.

We implemented changes to our disclosure controls and procedures and internal control over financial reporting to remediate the material weakness identified above. We strengthened the operation of our internal controls over the accounting for non-routine, complex equity transactions, including increasing the depth and experience within our accounting and finance organization, as well as designing and implementing improved processes and internal controls to identify such matters.

Although we have taken steps that we believe have addressed the underlying causes of the material weakness described above and although no other material weakness have been identified to date, other material weaknesses or deficiencies in our control environment may be identified in the future and we may be unable to accurately report our financial results, or report them within the time frames required by law or exchange regulations.

Our information systems may experience an interruption or breach in security.

We rely on our proprietary production management technology which has changed how users connect to our knowledge and other information technology (“IT”) systems to conduct our business. Despite our security and back-up measures, our IT systems are vulnerable to computer viruses, natural disasters and other disruptions or failures. The failure of our IT systems to perform as anticipated for any reason or any significant breach of security could disrupt our business and result in numerous adverse consequences, including reduced effectiveness and efficiency of our operations and those of our customers, inappropriate disclosure of confidential information, increased overhead costs, loss of intellectual property, loss of data privacy and damage to our reputation, which could have a material adverse effect on our business and results of operations. In addition, we may be required to incur significant costs to prevent or respond to damage caused by these disruptions or security breaches in the future.

Cybersecurity breaches and other disruptions could compromise our information and operations, and expose us to liability, which would cause our business and reputation to suffer.

In the ordinary course of our business, we collect and store sensitive data in our data centers and on our networks, including intellectual property, proprietary business information, information regarding our customers, suppliers and business partners, and personally identifiable information of our employees. The secure processing, maintenance and transmission of this information is critical to our operations and business strategy. Despite our security measures, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise our networks and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, regulatory penalties, disruption of our operations, damage to our reputation, and loss of confidence in our services, which could adversely affect our business.

Our information technology infrastructure is critical to the efficient operation of our business and essential to our ability to perform day-to-day operations. Breaches in our information technology infrastructure or physical facilities, or other disruptions, could result in damage to our assets, safety incidents, damage to the environment, loss of data privacy, potential liability or the loss of contracts, and have a material adverse effect on our operations, financial position and results of operations.

Possible tariffs could have a material adverse effect on our business.

The United States has in the past announced the implementation of tariffs on imported steel and could in the future consider tariffs on additional items. If this were to occur, it could result in the adoption of additional tariffs by other countries as well. Any resulting trade war could negatively impact the global market for oil field products and services and could have a significant adverse effect on our business. While we cannot predict how any future enacted tariffs will impact our business, the imposition of tariffs on items we import from other countries could increase our costs and could result in lowering our gross margin on products sold. The Company has not experienced a negative impact as a result of tariffs imposed on imported oil and gas products.

Our international activities are subject to many of the same risks as described above, as well as to risks associated with the legislative, judicial, regulatory, political, economic and cultural factors specific to the countries or regions in which we operate.

We have operations in the Middle East. Our International segment’s operations generated 11% and 13% of our revenue for the years ended December 31, 2022 and 2021, respectively. In general, the risk factors identified above also have relevance to our International operations. In addition, our International operations also expose us to other risks, including those related to, for example:

These factors could significantly disrupt our International operations and have a material adverse effect on our revenue and profitability and could lead us to incur material impairments and other exit costs.

Risks Relating to Our Common Stock

As a smaller reporting company, we are subject to scaled disclosure requirements that may make it more challenging for investors to analyze our results of operations and financial prospects.

Currently, we are a “smaller reporting company,” meaning that our outstanding common stock held by non-affiliates had a market value of less than $75$250 million as of June 15, 2017.30, 2022. As a “smaller reporting company,” we are able to provide simplified executive compensation disclosures in our filings; are exempt from the provisions of Section 404(b) of the Sarbanes-Oxley Act requiring that independent registered public accounting firms provide an attestation report on the effectiveness of internal control over financial reporting; and have certain other decreased disclosure obligations in our SEC filings, including, being required to provide only two years of audited financial statements in annual reports. Consequently, it may be more challenging for investors to analyze our results of operations and financial prospects.

We are an emerging growth company, and any decision on our part to comply only with certain reduced reporting and disclosure requirements applicable to emerging growth companies could make our common stock less attractive to investors.

We are an emerging growth company, and, for as long as we continue to be an emerging growth company, we may choose to take advantage of exemptions from various reporting requirements applicable to other public companies but not to “emerging growth companies,” including, but not limited to, not being required to have our independent registered public accounting firm audit our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. We could be an emerging growth company for up to five years following the completion of our initial public offering in May 2014. We will cease to be an emerging growth company upon the earliest of: (a) the end of the fiscal year following the fifth anniversary of our initial public offering, (b) the first fiscal year after our annual gross revenue exceeds $1.0 billion, (c) the date on which we have, during the previous three-year period, issued more than $1.0 billion in non-convertible debt securities or (d) the end of any fiscal year in which the market value of our common stock held by non-affiliates exceeded $700 million as of the end of the second quarter of that fiscal year. We cannot predict if investors will find our common stock less attractive if we choose to rely on these exemptions. If some investors find our common stock less attractive as a result of any choices to reduce future disclosure, there may be a less active trading market for our common stock and the price of our common stock may be more volatile.

Under the JOBS Act, emerging growth companies can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. However, we have elected to adopt new or revised accounting standards at such times as applicable to other non-emerging grown public companies.

Furthermore, a material weakness in internal controls may remain undetected for a longer period because of our extended exemption from the auditor attestation requirements under Section 404(b) of Sarbanes-Oxley.

As long as we are substantially controlled by the Meiers, the ability of our stockholdersshareholders to influence the outcome of matters will be limited.

The Meiers continue to own a substantial portion of our outstanding common stock and serve on our Board of Directors. As long as they have substantial voting control of our company, SDPI will have the ability to take many stockholder actions, including the election or removal of directors, irrespective of the vote of, and without prior notice to, any other stockholder. As a result, the Meiers will have the ability to influence or control all matters affecting us, including:

The market price of our common stock has been and may continue to be volatile.

The trading price of our common stock and the price at which we may sell common stock in the future are subject to large fluctuations in response to any of the following:

We do not anticipate paying dividends on our common stock in the near future.

We have not paid any dividends in the past and do not intend to pay cash dividends on our common stock in the foreseeable future. We currently intend to retain any earnings for the future operation and development of our business. In addition, under Utah law no distribution may be made if, after giving it effect: (a) we would be unable to pay our debts as they come due, or (b) our total assets would be less than our total liabilities. We can provide no assurance that those restrictions will not prevent us from paying a dividend in future periods.\

We may issue preferred stock whose terms could adversely affect the voting power or value of our common stock.

Our articles of incorporation authorizesauthorize us to issue, without the approval of our shareholders, one or more classes or series of preferred stock having such designations, preferences, limitations and relative rights, including preferences over our common stock respecting dividends and distributions, as our board of directors may determine. The terms of one or more classes or series of preferred stock could adversely impact the voting power or value of our common stock. For example, we might grant holders of preferred stock the right to elect some number of our directors in all events or on the happening of specified events or the right to veto specified transactions. Similarly, the repurchase or redemption rights or liquidation preferences we might assign to holders of preferred stock could affect the residual value of the common stock.

Certain provisions in our organizational documents could delay or prevent a change in control.

The existence of some provisions in our organizational documents could delay or prevent a change in control of our company, even if that change would be beneficial to our shareholders. Our articles of incorporation and bylaws contain provisions that may make acquiring control of our company difficult, including:

Significant short sales of our stock, or the perception that such sales could occur, could depress the market price of our common stock and impair our ability to raise capital.

If there are significant short sales of our stock, the price decline that could result from this activity may cause the share price to decline more so, which, in turn, may cause long holders of the stock to sell their shares, thereby contributing to sales of stock in the market. Such sales also may impair our ability to raise capital through the sale of additional equity securities in the future at a time and price that our management deems acceptable, if at all.

ITEM 1B. UNRESOLVED STAFF COMMENTS

Not applicable to smaller reporting companies.

ITEM 2. PROPERTIES

The Company owns fouroperates out of six buildings as part of its Vernal, Utah offices, which are used for manufacturing and executive offices. On December 7, 2020, the Company closed a sale-leaseback agreement for its headquarters and manufacturing facilities. Under the terms of the transaction, the Company sold the property for $4.5 million and simultaneously entered into a 15-year lease. Under the lease agreement, the Company has an option to extend the term of the lease and to repurchase the property. The Company’s management believes its current manufacturing facility, executive offices, and office facility isits new repair center in the Middle East, are sufficient for its current operations.

ITEM 3. LEGAL PROCEEDINGS

We are subject to litigation that arises from time to time in the ordinary course of our business activities. In February 2019, the Company filed a patent infringement lawsuit in the United States District Court for the Western District of Louisiana, Lafayette Division, asserting that Stabil Drill Specialties, LLC’s (“Stabil Drill”) Smoothbore Eccentric Reamer infringes the patents of Extreme Technologies, LLC (one of our subsidiaries) on our patented Drill-N-Ream tool. The lawsuit was subsequently moved from Louisiana to the United States District Court for the Southern District of Texas, Houston Division. Additionally, on May 20, 2019, Extreme Technologies, LLC sued Short Bit & Tool Co. and Lot William Short, Jr. (“Defendants”) in the Northern District of Texas-Dallas Division for their work manufacturing the Smoothbore Eccentric Reamer for Stabil Drill. The Dallas lawsuit is stayed pending resolution of the first-filed, Houston suit. On October 1, 2020, Superior Energy Services, Stabil Drill’s parent company, filed for bankruptcy, which resulted in a brief, automatic stay of the litigation. Superior Energy Services announced on February 2, 2021, that it successfully completed its financial restructuring and emerged from Chapter 11 bankruptcy, but this bankruptcy did not affect Extreme Technologies’ claims against Stabil Drill. On March 9, 2021, the Court lifted the automatic bankruptcy stay, and on May 12, 2021, the Court denied Stabil Drill’s motion for summary judgment of non-infringement. On May 23, 2022, the Court issued its Order on Claim Construction of the patents, adopting Extreme Technologies’ proffered interpretation on the disputed claim terms. The parties are preparing this case for trial and expect a jury trial setting in the fall of 2023.

We are not currently involved in any other litigation which management believes could have a material effect on our financial position or results of operations, except as follows:operations.

In October 2013, Del-Rio Resources, Inc. (“Del-Rio”) filed suit, on its own behalf and derivatively on behalf of Philco Exploration, LLC (“Philco”), against the following co-defendants (a) Tronco Ohio, LLC and Tronco, (b) the lender on the Tronco loan, ACF Property Management, Inc. (p.k.a. Fortuna Asset Management, LLC,) (“ACF”), (c) Troy and Annette Meier personally, and several of their family trusts, (d) Meier Family Holding Company, LLC and Meier Management Company, LLC, and (e) SDS and MPS in the Eighth Judicial District Court, Uintah County, Utah Cause #130800125 (the “Suit”). On May 11, 2017, pursuant to a mediation proceeding, all of the plaintiffs and remaining defendants in the Suit executed a Settlement Agreement whereby each of the parties have released all of their claims against the other parties to the Suit, without liability, effective as of March 22, 2017. Such release includes the Company’s two subsidiaries that were a party to the Suit, SDS and MPS, as well as Troy and Annette Meier personally and all of their family trusts named as defendants in the Suit. As a result of the execution of the Settlement Agreement, a Stipulated Motion for Dismissal with Prejudice was filed with the Court which includes a form of Order of Dismissal with Prejudice (the “Court Order”). On May 15, 2017, the Court Order was executed by the judge and the Suit was formally dismissed with prejudice.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicableapplicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Price RangeApproximate Number of Common StockEquity Security Holders

As of March 15, 2023, 29,245,080 shares of the Company’s common stock were outstanding and held by 21 shareholders of record. This figure does not take into account those shareholders whose certificates are held in the name of broker-dealer or other nominees.

The Company’s common stock trades on the NYSE MKTAmerican market under the symbol “SDPI”. The following table sets forth the high and low sale prices of our common stock as quoted on the NYSE MKT.

Approximate Number of Equity Security HoldersDividends

As of March 15, 2018 there were 23 stockholders of record and 2,254 beneficial owners of the Company’s common stock.

Dividends

The Company does not presently pay dividends on its common stock. The Company intends for the foreseeable future to continue the policy of not paying dividends and retaining earnings, if any, to finance the development and growth of its business.

Securities Authorized for Issuance under Equity Compensation Plans

Not applicableStock Performance Graph

ITEM 6. RESERVED

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

Overview

Superior Drilling Products, Inc. is an innovative drilling and completion tool technology company providing cost saving solutions that drive production efficiencies for the oil and natural gas drilling industry. Our headquarters and completions industry. The Company innovates, designs, engineers, manufactures, sells, and repairs drilling and completion tools.manufacturing operations are located in Vernal, Utah. Our drilling solutions include the patented Drill-N-Ream® well bore conditioning tool (“Drill-N-Ream tool”) and the patented Strider™ Drill String Oscillation System technology (“Strider technology” or “Strider”). In addition, the Company is a manufacturer of Drill-N-Ream tools and refurbisher of PDC (polycrystalline diamond compact) drill bits for a leading oil field services company. We operate a state-of-the-art drill tool fabrication facility, where we manufacture solutions for the drilling industry, as well as customers’ custom products. The Company’s

Our strategy for growth is to leverage itsour expertise in drill tool technology and innovative, precision machining in order to broaden itsour product offerings and solutions for the oil and gas industry. We believe through our patented technologies, as well as technologies under development, that we can offer the industry the solutions it demands to improve drilling efficiencies and reduce production costs.

In addition, in December 2020, the Company successfully obtained ISO 9000 certification and is now qualified to bid on projects in industries outside oil and gas. We believe that with this certification, and our history of supplying high quality parts to research and development departments operating in the aerospace industry, we can effectively execute our industry diversification strategy.

Industry Trends and Highlights of 2017Market Factors

OurThe Russia – Ukraine conflict is a global concern. The Company does not have any direct exposure to Russia or Ukraine through its operations, employee base, investments or sanctions. The Company does not receive goods or services sourced from those countries, does not anticipate any disruption in its supply chain and has no business is highly dependent uponrelationships, connections to or assets in Russia, Belarus or Ukraine. No impairments to assets have been made due to the vibrancy ofconflict. The global oil industry has been impacted by this situation, but the oilCompany’s operations and gas drilling operationsbusiness in the U.S.Middle East has not been disrupted to date. The reductionincrease in activity has created a more challenging environment in which to market the Company’s drilling products. Beginning in the latter half of 2014 and through early 2016, oil prices dramatically declinedproducing activities in the United States has benefitted the Company’s operations. We are unable at this time to know the full ramifications of the Russia – Ukraine conflict and as a result, the number of operating drill rigs in the U.S. was measurably reduced from the high of 1,931 on September 13, 2014 to a historic low of 404 as of May 27, 2016. The rig count began to recover in the latter half of 2016 and ended December 31, 2017 at 929 rigs. The rate of growth in rig count stabilized in July 2017 and is still increasing but at a slower rate than it did from mid-2016 to mid-2017. Generally, the industry is not expected to return to the record high rig count, but rather to operate more efficiently with fewer rigs.

During the dramatic downturn in oil prices and the drill rig count, there was significant pressure on pricing. While conditions have improved, the need to produce oil and gas at a lower cost continues to drive pricing decisions of our customers. This requires us to continually find ways to improve efficiencies and take out costs in production.

Although the Company has seen demand for its oil and gas related products and services in the United States and Canada impacted by these industry conditions, we continue to aggressively market our drilling products. The impact of volume and pricingeffects on our drill bit refurbishment business was especially pronounced as our exclusive customer for that business is a leading supplier of drill bitsbusiness.

Inflationary and/or recessionary factors relating to the oil and gas explorationindustry may directly affect the Company’s operations. The increased demand for oil and gas production industry globally.

Our leading producthas benefited the Company’s operations. The Company is the Drill-N-Ream tool. Other products include the V-Stream Advance Stabilization System and Dedicated Reamer Stringer. We commercialized the redesigned Coiled Tubing Strider in January 2017 and we expect to commercialize the Open Hole Strider, (“OHS”) which also employs the Strider drill string oscillation system technology, mid -2018.

In 2016, the Company changed its go-to-market strategy and business model from a rental tool company to a manufacturer that designs, builds and sells tools. A major step to effect the change was when we entered into an agreement with Drilling Tools International (“DTI”) in May 2016. Under the agreement, DTI had a requirement to purchase our Drill-N-Ream tool for their rental tool business and achieve market share requirements in order to maintain exclusive marketing rights for the Drill-N-Ream tool in the United States and Canada onshore and offshore markets. It must achieve defined market share goals with our tool which began in June 2017 and increases throughnot immune to the endeffects of 2020inflation on its labor requirements, supply chain and costs of revenues. The Company continues to maintain exclusive rights. We are inmonitor these economic trends as part of its strategic forward planning.

The total U.S. rig count as reported by Baker Hughes as of March 3, 2023 was 749 rigs, an increase of 99 rigs from the process of evaluating DTI’s market share performancerig count as of December 31, 2017,2021.

The Middle East market began to improve during 2022 after a slow rebound from the COVID-19 impact. Total rig count in that region as well as negotiating an amendmentof February 28, 2023 was 327 compared with 282 at the same time last year.

How We Generate our Revenue

We are a drilling and completion tool technology company. We generate revenue from the refurbishment, manufacturing, repair, rental and sale of drill string tools. Our manufactured products are produced in a standard manufacturing operation, even when produced to our customer’s specifications. We also earn royalty fees under certain arrangements for certain tools we sell.

Tool sales, rentals and other related revenue

Tool and Product Sales: Revenue for tool and product sales is recognized upon shipment of tools or products to the agreement with DTI.customer. Shipping and handling costs related to tool and product sales are recorded gross as a component of both the sales price and cost of the product sold.

Tool Rental: Rental revenue is recognized upon completion of the customer’s job for which the tool was rented. While the duration of the rental will vary by job and number of runs, these rentals are generally less than one month. The rental agreements are typically based on the price per run or footage drilled and do not have any minimum rental payments or term.

Other Related Revenue: We receive revenue from DTIthe repair of tools upon delivery of the repaired tool to the customer. We earn royalty commission revenue when our customer invoices their customer for tool sales, tool repairsthe use of our tools.

Contract Services

Drill Bit Manufacturing and a royalty fee based onRefurbishment: We recognize revenue for our PDC drill bit services upon transfer of control, which we have determined to be upon shipment of the tools usage.product. Shipping and handling costs related to refurbishing services are paid directly by the customer at the time of shipment. We also provide contracting manufacturing services to customers.

Costs of Conducting Our Business

Through our agreement with DTI, the Drill-N-Ream has been used by a growing number

Cost of operatorsrevenue is comprised of direct and has been used in a greater number of basins than its experience priorindirect costs to our agreement. There are certain customers with whom DTI is in the process of obtaining Master Service Agreements. During this process, we may act as an agent and bill and collect the rental tool usage on DTI’s behalf. When we act as an agent, we record the revenue net (the amount billed less our share of royalty revenue) on our financials and we remit the net amount to DTI.

In January of 2016, we entered into an agreement with Baker Hughes for our OHS. The agreement provides for us to supply to Baker Hughes our drill string oscillation tool to package with their other products. The OHS reduces drill string friction on horizontal wells, resulting in improved rates of penetration and cost savings. The agreement has no set expiration date or minimum shipment requirement. It will remain in force until either the Company or Baker Hughes cancel it. Subject to certain limitations, the agreement is terminable by Baker Hughes on 30 days prior written notice. The tool is expected to be commercialized in mid-2018.

We spent much of 2016 developing the CTS, which was subsequently commercialized in January 2017. This tool also applies the Strider technology, but for the completions industry, a market in which we had not previously competed. We have since re-engineered the CTS in order to more economically manufacture, repair and maintain the tool. Prototype tools are being developedsupply our products, including labor, materials, utilities, equipment repair, lease expense related to our facilities, supplies and we expect to commercialize the re-engineered CTS in the first halffreight.

Selling, general and administrative expense is comprised of calendar year 2018. We are currently considering distribution channel partnerscosts such as new business development, technical product support, research and development costs, compensation expense for this productgeneral corporate operations including accounting, human resources, risk management, etc., information technology expenses, safety and in the meantime are directly renting the tools which require higher maintenance to operators, completion services companiesenvironmental expenses, legal and professional fees and other customers.related administrative functions.

In December 2017, the Company entered into an agreementOther income (expense), net is comprised primarily of interest expense associated with Weatherford U.S., L.P. (“Weatherford”) to launch a joint market development program to introduce our Drill-N-Ream tool in the Middle East. Under the development agreement, Weatherfordoutstanding borrowings net of interest income, impairment of asset held for sale and SDPI will demonstrate the Drill-N-Ream’s capabilities with large Middle East operators in Saudi Arabia, Kuwait and Oman. The program is planned to continue through June 30, 2018. SDPI and Weatherford each employ a local resident Product Champion to execute the pilot test programlosses on disposition of 18 Drill-N-Ream tools. Upon the technology being proven in the region, the parties plan to enter into a long-term commercial agreement.assets.

RESULTS OF OPERATIONS

The following table represents our condensed consolidated statement of operations for the periods indicated:

Comparison of the years ended December 31, 2022 and 2021

Revenue

Material changes of certain items in our statements of operations included in our financial statements

Our revenue increased approximately $5,762,000, or 43%, for the comparative periods are discussed below.year ended December 31, 2022 compared to the year ended December 31, 2021. The increase was driven by approximately $3,107,000, or 34%, increase in tool revenue compared to the prior year reflecting the strong market share of the DNR in the U.S. and expansion of our business in the Middle East which contributed approximately $463,000 of the increase in tool revenue. Contract services revenue increased by $2,654,000, or 65%, over the prior year, primarily due to expansion of services for our major customer and increased activity in the oil field industry.

Revenue

Operating Costs and Expenses

Our

Cost of Revenue

Cost of revenue increased approximately $8,442,000, during$2,712,000, or 48%, for the twelve monthsyear ended December 31, 20172022 compared to the year ended December 31, 2021. The increase was driven by higher volume sold, consistent with the 43% increase in revenue compared with the same periodprior year. In addition, costs have increased from impacts of inflation and supply chain constraints. International cost of revenue increased 18% in 20162022 due to higher payroll costs and thisadditional facility expenses.

Selling, general and administrative expenses

Selling, general and administrative expenses increased approximately $1,126,000, or 18%, for the year ended December 31, 2022 compared to the year ended December 31, 2021. The increase iswas the result of increased payroll costs primarily attributable to reinstatement of executive management salaries and increased legal fees during the increase in the oil and gas production market as well as the increase in the price of oil. Tool revenue for 2017 was approximately $10,597,000. This was comprised of approximately $6,691,000 of rental tool and tool sales revenue and approximately $3,906,000 of other related revenue (royalty fees and maintenance and repair services). Tool revenue for 2016 was approximately $5,483,000 and was comprised of approximately $4,928,000 of rental tool and tool sales and approximately $556,000 of other related revenue. Tool revenue in 2017 grew as a result of the Company’s shift in business model in May 2016 from a rental tool business to a predominately tool sales business, the increase in the U.S. drilling activity from 2016 to 2017, and the Company’s channel partners efforts to retain its exclusivity in the U.S. and Canada by achieving its increasing market share targets. Contract services revenue increased 200% to approximately $4,998,000 for the twelve monthsyear ended December 31, 20172022.

Depreciation and amortization expenses

Depreciation and amortization expenses decreased approximately $600,000, or 29%, for the year ended December 31, 2022 compared with the year ended December 31, 2021. The decrease was primarily due to a portion of the intellectual property intangible balance that reached its full amortization in May 2021.

Other Income (Expenses)

Interest Income

Interest income increased approximately $1,669,000$26,000, or 11,600%, for the same period in 2016.year ended December 31, 2022 compared to the year ended December 31, 2021. The increase in contract services wasis due to an increase in drilling activityinterest rates earned on the cash balance held in 2017,interest bearing accounts.

Interest Expense

Interest expense decreased approximately $33,000, or 6%, for the year ended December 31, 2022 compared to the year ended December 31, 2021. The decrease in interest expense was due primarily to the lower balance outstanding on the Hard Rock Note, which drove demandwas fully repaid in October 2022.

Recovery of related party note receivable

Recovery of related party note receivable was approximately $707,000 for drill bit refurbishment services.the year ended December 31, 2021 pertaining to partial recovery of the related party note receivable (Tronco note – See Note 6 – Related Party Transactions to the financial statements). There was no such recovery for the year ended December 31, 2022.

Impairment on Asset Held for Sale

Operating Costs and Expenses

Impairment on asset held for sale was approximately $130,000 for the year ended December 31, 2022. In December 2022, the Company entered into an agreement to sell certain equipment, which closed in January 2023. As such, management made adjustments to reflect the fair value of this equipment as of December 31, 2022.

Total

Loss on Disposition of Assets

Loss on disposition of assets was $249 for the year ended December 31, 2021.

Liquidity and Capital Resources

At December 31, 2022, we had working capital of approximately $4,457,000. Our principal uses of cash are operating expenses, working capital requirements, capital expenditures and debt service payments. Our operational and financial strategies include managing our operating costs and expenses decreased approximately $28,000 during the twelve months ended December 31, 2017 compared with the same period in 2016.

Other Income (Expenses)

Other incomecapital spending to reflect revenue trends, accelerating collections of international receivables, and expense primarily consists of rent income, interest income, interest expense and gain on disposition of assets.

Liquidity and Capital Resources

At December 31, 2017, we had acontrolling our working capital deficit of approximately $1,300,000. The Company’s manufacturing facility is financed by a commercial bank loan with principal of $4,200,000 due August 15, 2018. The classification of thisand debt from long-term to short-term resultedenhance liquidity. We will continue to work to grow revenue and manage costs and expect to be cash flow positive in a working capital deficit at December 31, 2017. The Company is working to refinance its commercial bank mortgage loan in the first half of 2018.If2023. If we are unable to refinance our commercial bank loan that is collateralized by our property, we may disrupt our overall business operations and our ability to generate revenue anddo this, we may not be able to, among other things, (i) maintain our current general and administrative spending levels; (ii) fund certain obligations as they become due; and (iii) respond to competitive pressures or unanticipated capital requirements. We cannot provide any assurance that financing will be available to us in the future on acceptable terms.

Public Offering: On September 30, 2016, we sold 5.75 million shares of common stock in a follow-on public offering of common stock for $1.00 per share. The transaction closed on October 5, 2016. Net of underwriting and stock offering expenses, net proceeds were approximately $5.0 million. The Company used the proceeds to repay debt and used the remaining $2.6 million from the offering to service on going debt obligations, which included real property leases and equipment loans, as well as for general corporate purposes, including growth working capital. The Bridge Financing Agreement and the FNCC lending agreement were both terminated upon the repayment on October 5, 2016.

Hard Rock Note: On August 10, 2016, certain of our subsidiaries entered into an amended and restated note with the seller in our acquisition of Hard Rock Solutions, LLC (as so amended and restated, the “Hard Rock Note”). As amended and restated, the Hard Rock Note accrues interest at 5.75% per annum and maturity was extended to January 15, 2020. In addition, we issued 700,000 restricted shares of common stock (having an agreed per share value of $1.43, or $1,000,000 in the aggregate) as payment for $1,000,000 of the $1,500,000 of principal due on October 15, 2016. On October 21, 2016, the Company filed a registration statement with the SEC to register the resale of the 700,000 shares of restricted stock. Additional interest continued to accrue on the Hard Rock Note based on the $1,000,000 value of the shares until the registration statement was declared effective on November 21, 2016.

Credit Agreement

We have a Loan and Security Agreement with Austin Financial Services, Inc. (“AFS”) (the “Credit Agreement”). The Credit Agreement provides a $4,300,000 credit facility, which includes a $800,000 term loan (the “Term Loan”) and a $3,500,000 line of credit (the “Line of Credit”). As of December 31, 2022, we had approximately $814,000 outstanding on the Line of Credit and nothing outstanding on the Term Loan. Amounts outstanding under the Line of Credit at any time may not exceed the sum of: (a) up to 85% of accounts receivable or such lesser percentage as AFS in its sole discretion may deem appropriate if it determines that there has been a material adverse effect (less a dilution reserve as determined by AFS in its sole good faith discretion), plus (b) the lesser of (i) up to 50% of inventory or such lesser percentage as AFS in its sole discretion may deem appropriate if it determines that there has been a material adverse effect, or (ii) the inventory sublimit, minus (c) the borrowing base reserve as may be determined from time to time by AFS. A collateral management fee is payable monthly on the used portion of the Line of Credit and Term Loan. If our aggregate borrowings are less than $1,000,000, we still pay interest as if we had borrowed $1,000,000. At December 31, 2022, we had approximately $10,200 of accrued interest related to the Line of Credit.

The interest rate for the Term Loan and the Line of Credit is prime plus 2%. At December 31, 2022, the interest rate was 12.28%, which includes a 3.6% management fee rate. The obligations of the Company under the agreement are secured by a security interest in substantially all of the tangible and intangible assets of the Company, other than any assets owned by the Company that constitute real property (and fixtures affixed to such real property), certain excluded equipment, intellectual property, or aircraft. The Credit Agreement matured on February 20, 2023 and automatically renewed for one additional year. Cancellation is allowed with a 60-day notice.

Financing Obligation Liability

On December 7, 2020, the Company closed a sale-leaseback agreement for its headquarters and manufacturing facilities. Under the terms of the transaction, the Company sold the property for $4.45 million and simultaneously entered into a 15-year lease. After fees, the Company netted approximately $4.26 million in proceeds of which $2.64 million was used to repay in full the outstanding mortgage on the property. Under the lease agreement, the Company has an option to extend the term of the lease and to repurchase the property. Due to this repurchase option, the Company was unable to account for the transfer as a sale under ASC Topic 842, Leases, and as such, the transaction is a failed sale-leaseback that is accounted for as a financing transaction.

Machinery Loans

The Company financed a purchase of machinery and equipment in 2019. This equipment was impaired and held as an asset for sale at the end of 2022. The equipment was sold in January 2023 and the loan was paid $515,452 in interest in 2017 and made an advanced paymentfull on December 29, 2022. The balance of $500,000 in principal on the Hard Rock Note in November 2017. The accrued interest on the notethis equipment loan totaled $357,963 as of December 31, 2017 was $51,986. Subsequent to2021.

The Company also financed the endpurchase of 2017,machinery and equipment in January 2018, the Company paid $70,890 in interest and another advanced payment of $500,000 in principal on the Hard Rock Note. Remaining paymentsJuly 2022. The term of the Hard Rock Note for 2018, $500,000loan is 60 months and matures in principal plus accruedJuly 2027. The loan has an interest on eachrate of May 15 and July 15, 2018. For 2019, $1,000,000 in principal plus accrued interest is due and payable on each of January 15, March 15, May 15 and July 15, 2019.5.50%. The remaining balance of principal of $2,000,000 and accrued interest on the Hard Rock Note are due on January 15, 2020.

Contractual Obligations

The following table presents our contractual obligationsequipment loan totaled $620,176 as of December 31, 2017. Our obligations to make payments in2022.

Insurance Loan

In June 2022, the future may vary due to certain assumptions including the duration of our obligations and anticipated actions by third parties accordingCompany financed insurance premiums with a loan agreement. In September 2022 an additional insurance amount was added to the following table (in thousands):

loan. The aggregate outstandingloan matures in March 2023. The balance of our notes payable and capital lease obligations net of discountsthe insurance loan totaled $156,949 as of December 31, 2017, was approximately $12.8 million with interest rates ranging from 0% to 8.4%.2022.

The Company had no off balance sheet arrangements.

Cash Flow

Cash Flow

Operating Cash Flows

For the year ended December 31, 2017,2022, net cash provided by operating activities was approximately $3,547,000. The Company had approximately $1,065,000 of net income, $2,658,000 of non-cash expenses, $675,000 increase in deferred income, offset by $850,000 decrease in working capital accounts.

For the year ended December 31, 2021, net cash provided by our operating activities was approximately $2,359,000.$526,000. The Company had approximately $279,000$530,000 of net loss, an approximately $1,628,000$1,526,000 increase in accounts receivable, an approximately $613,000 of stock-based compensation expense, and$144,000 increase in inventories, which were offset in part by depreciation and amortization expense of approximately $3,677,000.$2,104,000 and share-based compensation expense of approximately $757,000.

Investing Cash Flows

For the year ended December 31, 2017,2022, net cash provided by ourused in investing activities was approximately $1,548,000. The Company received approximately $2,484,000$3,330,000, primarily related to the salepurchases of the SAB facilities. The Company used approximately $936,000 in investing activities for property, plant and equipment purchases.equipment.

Financing Cash Flows

For the year ended December 31, 2017,2021, net cash used in investing activities was approximately $867,000. The Company used approximately $937,000 for property, plant and equipment purchases, offset in part by proceeds from the sale of fixed assets of approximately $50,000.

Financing Cash Flows

For the year ended December 31, 2022, net cash used in financing activities was approximately $881,000, primarily related to principal payments on debt of approximately $1,695,000, proceeds from debt borrowings of approximately $997,000 and net payments on the Line of Credit of $184,000.

For the year ended December 31, 2021, net cash provided by our financing activities was approximately $3,774,000. The Company made a $2,500,000 loan repayment in February 2017$1,221,000 and primarily related to proceeds the SAB property that was sold. The Company also made approximately $983,000sale of common stock of $1,697,000. Total payments on debt, net of borrowings, were $476,000 consisting of principal payments on debt during 2017, approximately $74,000 principal paymentsof $1,278,000, and a net borrowing on related party debt, and approximately $217,000 principal payments on capital lease obligations.the Line of Credit of $802,000.

Off Balance Sheet Arrangements

None

Critical Accounting Policies and Estimates

The discussion of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with GAAP. During the preparation of these financial statements, we are required to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures. On an ongoing basis, we evaluate our estimates and assumptions, including those discussed below. We base our estimates on historical experience and on various other assumptions that we believe are reasonable under the circumstances. The results of our analysis form the basis for making assumptions about the carrying values of assets and liabilities that are not readily apparent from other sources. While we believe that the estimates and assumptions used in the preparation of our consolidated financial statements are appropriate, actual results may differ from these estimates under different assumptions or conditions, and the impact of such differences may be material to our consolidated financial statements. Our estimates and assumptions are evaluated periodically and adjusted when necessary. Described below are the most significant policies we apply in preparing our consolidated financial statements, some of which are subject to alternative treatment under GAAP. We also describe the most significant estimates and assumptions we make in applying these policies. See Note 1 to our consolidated financial statements.

Segment reportingRevenue Recognition

We account for revenue in accordance with Accounting Standard Codification (“ASC”) Topic 606, Revenue from Contracts with Customers (“ASC 606”), except for tool rental revenue. Under ASC 606 revenue is not applicablemeasured based on a consideration specified in a customer’s contract, excluding any sale incentives and taxes collected on behalf of third parties. Revenue is recognized when a customer obtains control of promised goods or services in an amount that reflects the consideration that we expect to usreceive for those goods or services. To recognize revenue, we (i) identify the contract(s) with a customer; (ii) identify the performance obligations in the contract; (iii) determine the transaction price; (iv) allocate the transaction price to the performance obligations in the contract; and (v) recognize revenue when, or as, we have a single, company-wide management team that administerssatisfy the Companyperformance obligation(s). Shipping and handling costs incurred are accounted for as a whole, rather than by discrete business units. While we have three business product linesfulfillment costs and reportare included in cost of revenues in the revenues by product line internally and externally, we do not capture expenses by product line and as such, we do not maintain complete separate financial statement information by product line. We evaluate our business performance as a single segment and we report as a single segment.statements of operations.

Revenue RecognitionShare-Based Compensation

We are a drilling and completion tool technology company and we generate revenue from the manufacturing, repair, and sale of drilling and completion tools. Our manufactured products are produced in a standard manufacturing operation, even when produced to our customer’s specifications. We earn royalty commission revenue when our customer invoices their customer for the use of the tools.

Stock-Based Compensation

Stock-basedShare-based compensation is measured at the grant date, based on the fair value of the award, and is recognized ratably as an expense over the vesting period of the award. Determining the appropriate fair value model and calculating the fair value of stock-basedshare-based payment awards require the use of subjective assumptions, including the expected life of the stock-basedshare-based payment awards and stock price volatility. Management uses the Black-Scholes option pricing model to value award grants and determine the related compensation expense. The assumptions used in calculating the fair value of stock-basedshare-based payment awards represent management’s best estimates, but the estimates involve inherent uncertainties and the application of management judgment. As a result, if factors change and management uses different assumptions, the Company's stock-basedCompany’s share-based compensation expense could be materially different in the future. The Company expects to continue to grant stock-basedshare-based awards in the future, and to the extent that the Company does, its actual stock-basedshare-based compensation expense recognized in future periods will likely increase.

Concentration of Credit Risk

Substantially all of our revenue is derived from our refurbishing of PDC drill bits for Baker Hughes and from the sale of our Drill-N-Ream tool to DTI.

Accounts Receivable and Allowance for Doubtful Accounts

Accounts receivable are generally due within 60 days and 90 days of the invoice date.date for domestic and international customers, respectively. No interest is charged on past-due balances. We grant credit to our customers based upon an evaluation of each customer’s financial condition. We periodically monitor the payment history and ongoing creditworthiness of our customers. An allowance for doubtful accounts is established at a level estimated by management to be adequate based upon various factors including historical experience, aging status of customer accounts, payment history and financial condition of our customers. The allowance for doubtful accounts was $18,450 and $9,000$0 at both December 31, 20172022 and 2016, respectively.2021.

Intangible Assets

Annually, and more often as necessary, we will perform an evaluationSubstantially all of our intangible assetsrevenue is derived from our refurbishing of PDC drill bits for indications of impairment. If indications exist,Baker Hughes and from DTI when we will perform an evaluation1) sell the Drill-N-Ream tool, 2) repair drilling bits and the Drill-N-Ream tool, and 3) earn royalty on our customer’s rental of the fair valueDrill-N-Ream tool to the end user. Internationally our revenue is derived from the rental of the intangible assets and, if necessary, record an impairment charge. Asour Drill-N-Ream tool to large oilfield service companies. While our credit risk is concentrated, all of December 31, 2017, the Company performed an evaluation of the intangible assets. Basedour customers have historically had excellent payment history. Management monitors accounts receivable collections on this assessment, we have determined no impairment was needed.a weekly basis.

Valuation of Inventories

Inventories consist of raw materials, work-in-process and finished goods and are stated at the lower of cost, determined using the weighted-average cost method, or net realizable value. Finished goods inventories include raw materials, direct labor and production overhead. The Company regularly reviews inventories on hand and current market conditions to determine if the cost of finished goods inventories exceed current market prices and impairs the cost basis of the inventory accordingly. The Company wrote off $0 related to slow moving inventory during the years ended December 31, 2022 and 2021.

Property, Plant and Equipment

Property, plantRelated Party Note Receivable

In January 2014, we entered into a Note Purchase and equipment is stated at cost. The cost of ordinary maintenance and repair is chargedSale Agreement under which we agreed to operating expense, while replacement of critical components and major improvements are capitalized. Depreciation or amortization of property, plant and equipment, including assets held under capital leases, is calculated using the straight-line methodpurchase a loan made to Tronco Energy Corporation (“Tronco”), a party related to us through common control, in order to take over the asset’s estimated useful lifelegal position as follows:Tronco’s senior secured lender. That agreement provided that, upon our full repayment of the Tronco loan from the proceeds of our initial public offering, the lender would assign to us all of its rights under the Tronco loan, including all of the collateral documents. On May 30, 2014, we closed our purchase of the Tronco loan for a total payoff of $8.3 million, including principal, interest, and early termination fees.

Property, plantThe Meier Guaranties were determined not to be substantive based on GAAP that states that the substance of a personal guarantee depends on the ability of the guarantor to perform, the practicality of enforcing the guarantee, and equipment is reviewed for impairmentthe demonstrated intent to enforce the guarantee. Since the Company did not demonstrate intent by either enforcing the redemption of collateral or the guarantees by the borrowers to repay the loan when the related party note receivable was due and payable on an annual basis or whenever events or changes in circumstances indicateDecember 31, 2017 and instead modified the carrying value of an asset or asset group may not be recoverable. Indicative events or circumstances include, butloan by extending the payment term, the Company determined the guarantees are not limitedsubstantive and therefore should not serve as the basis for concluding the loan is well secured and collateralized. As a result, the Company fully reserved the related party note receivable effective August 2017. The Company continues to matters suchhold the 8,267,860 shares of the Company’s common stock as collateral. The Company will record a significant decline in market value orrecovery of the loan upon receiving repayment of the note, but there is no guarantee a significant change in business climate. An impairment loss is recognized whenfull recovery of the carrying valueloan will occur.

On January 31, 2023, the Company entered into a second amended and restated loan agreement and note with Tronco to extend the maturity date of an asset exceeds the estimated undiscounted future cash flowsprincipal to March 31, 2023.

Government Grant

The Company applied for and received a grant award of up to $750,000 from the useState of Utah’s Manufacturing Modernization Grant Program. The program helps develop manufacturing industry in the state. Current GAAP has no specific authoritative guidance on the accounting for government assistance received by business entities. However, Accounting Standard Codification (“ASC”) 105 describes the decision-making framework for determining the guidance to apply when guidance is not specified by GAAP. ASC 105 points to IAS 20, Accounting for Government Grants and Disclosure of Government Assistance, and ASC 958-605, Not-for-Profit Entities - Revenue Recognition, that require conditions of the grant to be met in order to recognize the income.

During 2022, the Company met the conditions of the grant and, therefore, recorded the initial grant funding totaling $675,000 as deferred income on the balance sheet, as portions of the grant are approved by the State of Utah. Income will be recognized on a straight-line basis over the life of the asset once all project requirements, such as employee training and its eventual disposition. The amount of impairment loss recognized is the excessinstallation of the asset’s carrying value over its fair value. Assets to be disposed of are reported at the lower of the carrying value or the fair value less cost to sell. Upon sale or other disposition of an asset, the Company recognizes a gain or loss on disposal measured as the difference between the net carrying value of the asset and the net proceeds received.equipment, have been completed.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

We do not maintain any derivative instruments such as interest rate swap arrangements, hedging contracts, futures contracts or the like.

Concentration of Credit Risk —

We are dependent on just a few mainlimited number of significant customers. TheFor the year ended December 31, 2022, the Company had two significant customers that represented 97%88% of our revenue for the year ended December 31, 2017.revenue. These customers had approximately $2,523,000$1,751,000 in accounts receivable at December 31, 2017. We had two customers that represented 63% of our revenue for2022. For the year ended December 31, 2016, and2021, the Company had two significant customers that represented 87% of our revenue. These customers had approximately $650,000$1,910,000 in accounts receivable at December 31, 2016.2021.

We are continuing to developDeveloping new products and tools and selling more existing products to additional customers continues to be a strategic initiative which we believe will broaden our customer base, which willshould have a positive effect on diversifying our concentration of credit risk.

For the year ended December 31, 2022, the Company had two vendors that represented 12% of our purchases. These vendors had approximately $74,000 in accounts payable at December 31, 2022. For the year ended December 31, 2021, the Company had two vendors that represented 13% of our purchases. These vendors had approximately $136,000 in accounts payable at December 31, 2021.

ITEM 8. CONSOLIDATED FINANCIAL STATEMENTS

SUPERIOR DRILLING PRODUCTS, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Report of Independent Registered Public Accounting Firm

To the Shareholders and the Board of Directors of

Superior Drilling Products, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheetsheets of Superior Drilling Products, Inc.and subsidiaries (the “Company”)Company) as of December 31, 20172022 and 2021, the related consolidated statements of operations, stockholders’shareholders’ equity and cash flows for the yearyears then ended, and the related notes (collectively referred to as the “consolidatedconsolidated financial statements”statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the consolidated financial position of the Company as of December 31, 20172022 and 2021, and the consolidated results of its operations and its cash flows for the yearyears then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audit.audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”)(PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our auditaudits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our auditaudits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our auditaudits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures to respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our auditaudits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our auditaudits provides a reasonable basis for our opinion.

Critical Audit Matters

Critical audit matters are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. We determined that there are no critical audit matters.

We have served as the Company’s auditor since 2017.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders

Superior Drilling Products, Inc.

We have audited the accompanying consolidated balance sheet of Superior Drilling Products, Inc. and subsidiaries (collectively, the “Company”) as of December 31, 2016, and the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the year then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Superior Drilling Products, Inc. and subsidiaries as of December 31, 2016, and the results of their operations and their cash flows for each of the year then ended, in conformity with U.S. generally accepted accounting principles.

SUPERIOR DRILLING PRODUCTS, INC.

CONSOLIDATED BALANCE SHEETS

DECEMBER 31, 20172022 and 20162021

The accompanying notes are an integral part of these consolidated financial statements.

SUPERIOR DRILLING PRODUCTS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

FOR THE YEARS ENDED DECEMBER 31, 20172022 and 20162021