UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 20182020

Or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________________________ to ______________________

Omega Flex, Inc.

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to section 12(g) of the Act:

Not applicable

(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [  ] ☐ No [X☒]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes [  ] ☐ No [X☒]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X☒] No [  ]☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).Yes [. YesX☒] No [  ]☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” and “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (check one):

Large accelerated filer [  ]☐ Accelerated filer [X☒] Non-accelerated filer [  ]☐ Smaller reporting company [  ]☐ Emerging Growth Company [  ]☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act Yes [  ]☐ No [  ]☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C 7262(b)) by the registered public accounting firm that prepared or issued its audit report ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [  ] ☐ No [X☒]

The aggregate market value of voting and non-voting common shares held by non-affiliates of the registrant as of June 30, 2018,2020, the last business day of the second quarter of 2018,2020, was $228,182,748.$304,424,053.

The number of shares of common stock outstanding as of March 1, 20192021 was 10,091,822.10,094,322.

DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III (Items 10, 11, 12, 13, and 14) is incorporated by reference from the registrant’s definitive proxy statement (to be filed pursuant to Regulation 14A)14A no later than 120 days after the year ended December 31, 2020, or April 30, 2021) for the 20192021 annual meeting of shareholders to be held on June 11, 2019.shareholders.

Omega Flex, Inc.

TABLE OF CONTENTS

PART I

Item 1 - BUSINESS

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

Certain statements in this Annual Report on Form 10-K that are not historical facts — but rather reflect our current expectations concerning future results and events — constitute forward-looking statements. The words “believes,” “expects,” “intends,” “plans,” “anticipates,” “intend,” “estimate,” “potential,” “continue,” “hopes,” “likely,” “will,” and similar expressions, or the negative of these terms, identify such forward-looking statements. Such forward-looking statements involve known and unknown risks, uncertainties and other important factors that could cause the actual results, performance or achievements of Omega Flex, Inc., or industry results, to differ materially from future results, performance or achievements expressed or implied by such forward-looking statements.

Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management’s view only as of the date of this annual report statement. We undertake no obligation to update the result of any revisions to these forward-looking statements which may be made to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, conditions or circumstances.

GENERAL

DESCRIPTION OF OUR BUSINESS

Overview of the Company

Omega Flex, Inc. (Omega Flex) is a leading manufacturer of flexible metal hose, and is currently engaged in a number of different markets, including construction, manufacturing, transportation, petrochemical, pharmaceutical and other industries.

The Company’s business is managedcontrolled as a single operating segment that consists of the manufacture and sale of flexible metal hose (also described as corrugated tubing), as well as the sale of the Company’s related proprietary fittings and a vast array of accessories.

The Company’s products are concentrated in residential and commercial construction, and general industrial markets, withCompany is a comprehensive portfolioleading manufacturer of intellectual property and patents issued in various countries around the world. The Company’s primary product, flexible gas piping,metal hose, which is used for gas pipingin a variety of ways to carry gases and liquids within residential and commercial buildings. Through its flexibility and easetheir particular applications. Some of use, the Company’s TracPipe^® and TracPipe^®CounterStrike^®more prominent uses include:

The Company manufactures flexible gas piping, along with its fittings distributed under the trademarks AutoSnap^® and AutoFlare^®, allows users to substantially cut the time required to install gas piping, as compared to traditional methods. The Company’s products are primarily manufacturedmetal hose at its facilities in Exton, Pennsylvania, facilitiesand Houston, Texas in the United States (U.S.), and in Banbury, Oxfordshire in the United Kingdom. A majority of the Company’s sales across all industries are generatedKingdom (U.K.), and primarily sells its products through independent outside sales organizations such as sales representatives,distributors, wholesalers and distributors, or a combination of both. The Company has a broad distribution network into original equipment manufacturers (“OEMs”) throughout North America and Europe, and to a lesser extent in other global markets.

Industry Overview

The flexible metal hose industry is highly fragmented and diverse, with overmore than 10 companies producing flexible metal hose in the United States, and at least that many in Europe and Asia. Because of its simple and ubiquitous nature, flexible metal hose can be applied and has been applied to a number of different applications across a broad range of industries.

The major market categories for flexible metallic hose include (1) automotive, (2) aerospace, (3) residential, commercial, and institutional construction, and (4) general industrial. Omega Flex participates in the latter two markets for flexible metallic hose. The residential and commercial construction markets utilize corrugated stainless steel tubing (CSST) primarily for flexible gas piping, double containment piping for conveying diesel fuel and gasoline from a storage tank to a dispenser or back-up generator. The Company utilizes corrugated copper tubing for medical gases in medical care facilities, including hospitals, clinics, dental and veterinary offices and long-term care facilities. The general industrial market includes all of the processing industries, the most important of which include primary steel, petrochemical, pharmaceutical, and specialty applications for the transfer of fluids at both extremely low and high temperatures, (such as the conveying of cryogenic liquids) and a highly fragmented Original Equipment Manufacturers (OEM)OEM market, as well as the maintenance and repair market.

None of our competitors appear to be dominant in more than one market. We are a leading supplier of flexible metal hose in each of the markets in which we participate. Our assessment of our overall competitive position is based on several factors. The flexible gas piping market in the U.S. is currently concentrated in the residential housing market. Based on the reports issued by the national trade groups on housing construction, the level of acceptance of flexible gas piping in the construction market, and the average usage of flexible gas piping in a residential building, we believe that we are able to estimate with a reasonable level of accuracy the size of the total gas piping market. In addition, the Company is a member of an industry trade group comprised of the largest manufacturers of CSST in the United States,U.S., which compiles and distributes sales volume statistics for its members relative to flexible gas piping. Based on our sales and the statistics described above, the Company believes it can estimate its position within that market. For other applications, industry trade groups collect and report data related to these markets, and we can then compare and estimate our status within that group as a whole. In addition, the customer base for the products that we sell, and the identity of the manufacturers aligned with those customers is fairly well known, which again allows the Company to extract information and estimate its market position. Lastly, the term “leading” implies a host of factors other than sales volume and market share position. It includes the range and capability of the product line, history of product development and new product launches, all of which information is in the public domain. Based on all of this information, the Company is reasonably confident that it is indeed a leader in the major market segments in which it participates.

Development of Business

Incorporated in 1975 under the name of Tofle America, Inc., the Company was originally established as the subsidiary of a Japanese manufacturer of flexible metal hose. For a number of years, we were a manufacturer of flexible metal hose that was sold primarily to customers using the hose for incorporation into finished assemblies for industrial applications. We later changed our name to Omega Flex, Inc., and in 1996, we were acquired by Mestek, Inc. (Mestek).

In January 2005, Mestek announced its intention to distribute its equity ownership in our common stock to the Mestek shareholders. A registration statement for the Omega Flex common stock was filed with the Securities and Exchange Commission and the registration statement was declared effective on July 22, 2005. We also listed our common stock on the NASDAQ National Market (now the NASDAQ Global Market) under the stock symbol “OFLX”, and began public trading of our common stock on August 1, 2005. All Mestek shareholders as of the record date for the distribution received one share of Omega Flex common stock for each share of Mestek common stock owned as of the record date. We are now a totally separate company from Mestek, and we do not use or share any material assets or services of Mestek in conducting our business.

Over the years, most of the Company’s business has been generated from Omega Flex, Inc., and concentrated in North America, but the Company also has two foreign subsidiaries located in the United Kingdom,U.K., which are largely focused on European and other international markets. The Company also has a local subsidiary which owns the Company’s Exton, Pennsylvania real estate.

Overview of Current Business

Strategy

The Company’s strategy has been and continues to be focused on its core strengths in the development, manufacture, and sale of flexible metal hose for use in a variety of applications. The Company is uniquely situated to exploit its capabilities in this area due to its long experience in engineering and bringing new products to market, and its proprietary rotary process, which permits the Company to manufacture flexible metal hose with superior quality and efficiency as compared to its competitors. The Company’s strategy is to develop flexible metal products in new and developing markets that would recognize and compensate for the value-added propositions that each product brings to that industry. Typically, this would involve a new flexible metal hose that replaces traditional rigid products, and thereby improve the quality of the installed product, increase installation efficiency, and provide an overall cost and time savings. Examples of such new products would be our flexible gas piping sold under the TracPipe ^® CounterStrike^® trademarks, our new MediTrac^® corrugated medical gas tubing, and our DoubleTrac^® double-containment piping. In each instance, the products we bring to market offers customers superior quality, expanded applications due to the product’s flexibility, and reduced total costs. The Company seeks to protect its investments in product develop by seeking and obtaining patent protection for new and unique features of its products.

Products

The Company’s business is managed as a single operating segment that consists of the manufacture and sale of flexible metal hose, fittings and accessories.

The Company has had the most success within the residential construction industry with its flexible gas piping products, TracPipe^®, which was introduced in 1997, and its more robust counterpart TracPipe^®CounterStrike^®, which came to market in 2004. Partnered with the development of our AutoFlare^® and AutoSnap^®patented fittings and accessories, both have enjoyed wide acceptance due to their reliability and durability. Within the residential construction industry, the flexible gas piping products that we offer and similar products offered by our competitors have sought to overcome the use of black iron pipe that has traditionally been used by the construction industry in the United States and Canada for the piping of fuel gases within a building. Prior to the introduction of the first CSST system in 1989, nearly all construction in the United States and Canada used traditional black iron pipe for gas piping. However, the advantages of CSST in areas subject to high incidence and likelihood of seismic events had been first demonstrated in Japan. In seismic testing, the CSST was shown to withstand the stresses on a piping system created by the shifting and movement of an earthquake better than rigid pipe. The advantages of CSST over the traditional black iron pipe also include lower overall installation costs because it can be installed in long uninterrupted lines within the building.

The flexibility of the tube allows it to be bent by hand without any tools when a change in direction in the line is required. In contrast, black iron pipe requires that each bend in the pipe have a separate fitting attached. This requires the installer to thread the ends of the black iron pipe, apply an adhesive to the threads, and then screw on the fitting, all of which is labor intensive and costly, including testing and rework if the work is not done properly. As a result of these advantages, the Company estimates that CSST now commands slightly over one-half of the market for fuel gas piping in new and remodeled residential construction in the United States, and the use of rigid iron pipe, and to a lesser degree copper tubing, accounts for the remainder of the market. The Company plans to continue its growth trend by demonstrating its advantages against other technologies, in both the residential and commercial markets, in both the United States and overseas in geographic areas that have access to natural gas distribution systems.

InAs previously mentioned, in 2004, wethe Company introduced a new brand of flexible gas piping sold under the registered trademark “CounterStrike^®”. CounterStrike^®is designed to be more resistant to damage from transient electrical arcing. This feature is particularly desirable in areas that are subject to high levels of lightning strikes, such as the Southeast and Ohio Valley sections of the United States.U.S. In a lightning strike, the electrical energy of the lightning can energize all metal systems and components in a building. This electrical energy, in attempting to reach ground, may arc between metal systems that have different electrical resistance, and arcing can cause damage to the metal systems. In standard CSST systems, an electrical bond between the CSST and the building’s grounding electrode would address this issue, but lightning is an extremely powerful and unpredictable force. CounterStrike^®CSST is designed to be electrically conductive and therefore disperse the energy of any electrical charge over the entire surface of the CounterStrike^®line. In 2007, wethe Company introduced a new version of CounterStrike^®CSST that was tested to be even more resistant to damage from electrical arcing than the original version, and substantially more effective than standard CSST products. As a result of its robust performance, the new version of CounterStrike^®has been widely accepted in the market, and thus during 2011, the Company made the decision to sell exclusively CounterStrike^®within the United States.U.S.. This move demonstrated the Company’s commitment to innovation and safety, and further enhanced our leadership in the marketplace.

In 2008, the Company introduced its first double containment piping product – DoubleTrac^®. DoubleTrac^®double containment piping has earned stringent industry certifications for its ability to safely contain and convey automotiveliquid fuels. DoubleTrac^®received certification from Underwriters Laboratory, the testing and approval agency, that our product is fully compliant with UL971A, which is the product standard in the United StatesU.S. for metallic underground fuel piping, ULc S667 which is the product standard in Canada for metallic underground fuel piping, as well as approvals from other relevant state agencies that have more stringent testing procedures for the product. Similar to our flexible gas piping, DoubleTrac^® provides advantages over older rigid pipe technologies. DoubleTrac^®is made and can be installed in long continuous runs, eliminating the need for manually assembling rigid pipe junctions at the end of a pipe or at a turn in direction. In addition, DoubleTrac^® has superior performance in terms of its ability to safely convey fuel from the storage tank to the dispenser, primarily because DoubleTrac^® is essentially a zero permeation piping system, far exceeding the most stringent government regulations. Originally designed for applications involving automotive fueling stations running from the storage tank to the fuel dispenser, the ability of DoubleTrac^®to handle a variety of installation challenges has broadened its applications to include refueling at marinas, fuel lines for back-up generators, and corrosive liquids at waste treatment plants. In short, in applications where double containment piping is required to handle potentially contaminating fluids or corrosive fluids, DoubleTrac^® is engineered to handle those demanding applications.

DEF-Trac^®, a complementary product which is very similar to DoubleTrac^®, was brought to the marketplace in 2011. DEF-Trac^®piping is specifically engineered to handle the demanding requirements for diesel emissions fluid (DEF). Recent federalFederal regulations require all diesel engines to use DEF to reduce the particulate contaminants from the diesel combustion process. However, DEF is highly corrosive and cannot be pre-mixed with the diesel fuel. This requires that new diesel trucks and automobiles must have separate tanks built into the vehicle so that the diesel emissions fluid can be injected into the catalytic converter after the point of combustion. Similarly, a large portion of fueling stations carrying diesel fuel are now also selling DEF through a separate dispenser. In addition to being highly corrosive, DEF also has a high freezing temperature, requiring a heat trace in the piping in applications in northern areas of the United States.U.S.. DEF-Trac^®flexible piping is uniquely suited to handle all of these challenges, as the stainless steel inner core is corrosion resistant, and DEF-Trac^®also comes with options for heat trace that is extruded directly into the wall of the product. In summary, DEF-Trac^®provides a complete solution to the demanding requirements of this unique application, as such, DEF-Trac^®has been met with enormous acceptance from the industry that was searching for a solution to the new environmental requirement. The advantageous market position of DEF-Trac^®has leveraged the penetration of DoubleTrac^® into the broader market for automotive fueling applications.

In September 2013, the Company announced that it would be releasing a newly developed fitting, AutoSnap^®, as part of its flexible gas piping product line. After successfully completing all required testing by independent testing agencies, as well as extensive field trials across the United StatesU.S. by trained TracPipe^® CounterStrike^® installers, AutoSnap^®was officially introduced to the market in January 2014 to wide acceptance. With its patent-pending design, the product simplified the installation process, and addressed installer preferences for both speed and ease of installation. The AutoSnap^® fitting now commands a significant portion of the Company’s fittings demand.

In January 2018,2019, the Company announced its new product launch for MediTrac®commercialized MediTrac^®, corrugated medical tubing (“CMT”)., following its 2018 launch with several beta sites. Developed for the healthcare industry, the product can be used in hospitals, ambulatory care centers, dental, physician and veterinary clinics, laboratories, and any facility that uses medical gas.gases (oxygen, nitrogen, carbon dioxide, etc.). Made from a copper alloy with an exterior fire-retardant jacket, corrugated MediTrac CMT^® is made and sold in long continuous-length rolls.This flexibilityrolls. MediTrac’s flexible nature and long lengthsstorage in rolls allows the productit to be transported to and installed in health care facilities much more easily and quickly than traditional medical grade rigid copper pipe, which comes in 20 foot long sections. The MediTrac CMT can be^® is unrolled from a spool and installed in a medical facility in one long continuous length, and can beis bent by hand when a change in direction is needed. The long lengths and ability to change direction easilywith ease eliminates labor that would otherwise be needneeded to braze connections to connect straight sections of copper pipe or elbows or tees for changes in direction.direction, while increasing installation efficiency and operational safety and minimizing downtime for healthcare facilities. Easy to assemble axial swaged brass fittings connect with all K, L and DWV medical tubing that is sized from ½” to 2” in diameter, and provides a leak-tight seal using ordinary hand tools. The patent-pending fitting also prevents tampering or disassembly through the use of a tamper-proof sleeve that is required by the Health Care Facilities Code (NFPA 99 – 2018 edition). The use of long continuous lengths and assembly of factory-made fittings eliminates most brazing work that is typically needed for installing traditional rigid copper pipe, increasing installation efficiency and operational safety. Rated for 185 psig, MediTrac® MediTrac^® can deliver the necessary volume of gas wherever itsit is needed across long distances of a large facility. A recent case study comparing the installation of rigid copper pipe and MediTrac® CMTMediTrac^® showed that MediTrac®MediTrac^® increases installation efficiency by a factor of five (i.e., a 500% increase in efficiency). BecauseBy reducing the tubing is supplied cleanednumber of joints and capped,brazed connections, MediTrac^® also reduces possible contamination into the medical gas system. MediTrac® hs additional benefits of eliminatingsystem along with the costs for installation materials like brazing rods and purge gases, easier transportation of rolls of pipe as compared to 20 foot long lengths of rigid copper pipe, and reduced fire risk from reduced number of brazed connections.associated with brazing. MediTrac^® is currently listed to UL 1365 and has an ASTM E84 rating of 25/50, and meets all 2018 requirements of the Health Care Facilities Code (NFPA 99 – 2018). We have completed several beta sites

In 2020, the MediTrac^® product line experienced significant growth in use and acceptance in the marketplace resulting from its ability to be quickly and safely installed to meet the unprecedented crisis caused by the COVID-19 pandemic. Numerous medical institutions and emergency medical centers used MediTrac^® CMT to quickly install medical gas lines in tent hospitals or in converted facilities to handle the surging demand. For example, MediTrac^® medical gas piping was installed in a NYC temporary hospital located in Central Park and in the Cleveland Clinic for patients with COVID-19 infections and in need of supplemental oxygen treatments. On September 25, 2020, the Centers for Medicare & Medicaid Services (CMS) issued a waiver allowing the use of CMT in new and existing healthcare facilities based on the provisions in NFPA 99 – 2018, and full commercialization will commenceallowing MediTrac^® to be installed in 2019.all facilities in the U.S.

In addition to the flexible gas piping and other previously described markets, our flexible metal hose is used in a wide variety of other applications. Our involvement in these markets is important because just as the flexible gas piping applications have sprung from our expertise in manufacturing annular metal hose, other applications may also evolve from our participation in the industry. Flexible metal hose is used in a wide variety of industrial and processing applications where the characteristics of the flexible hose in terms of its flexibility, and its ability to absorb vibration and thermal expansion and contraction, have substantial benefits over rigid piping. For example, in certain pharmaceutical processing applications, the process of developing the specific pharmaceutical may require rapid freezing of various compounds through the use of liquefied gases, such as liquefied nitrogen, helium or Freon. The use of flexible metal tubing is particularly appropriate in these types of applications. Flexible metal hose can accommodate the thermal expansion caused by the liquefied gases carried through the hose, and the total length of the hose will not significantly vary. In contrast, fixed or rigid metal pipe would expand and contract along its length as the liquid gases passed through it, causing stresses on the pipe junctions that would over time cause fatigue and failure. Alternatively, within certain industrial or commercial applications using steam, either as a heat source or in the industrial process itself, the pumps used to transfer the liquid or steam within the system are subject to varying degrees of vibration. Additionally, flexible metal hoses can also be used as connections between the pump and the intake of the fluids being transferred to eliminate the vibration effects of the pumps on the piping transfer system. All of these areas provide opportunities for the flexible metal hose arena, and thus the Company continues to participate in these markets, as it seeks new innovative solutions which will generate additional revenue streams for the future.

Manufacturing

In each instance, whether the application is for CSST for fuel gases, flexible metal hose for handling specialty chemicals or gases, flexible double containment piping, unique industrial applications requiring the ability to withstand wide variations in temperature and vibration, or copper alloyed CMT for medical facilities, all of our success rests on our metal hose. Most of our flexible metal hoses range in diameter from 1/4” to 2” while certain applications require diameters of up to 16”. All of our smaller diameter pipe (2” inner diameter and smaller) is made by a proprietary process that is known as the rotary process. The proprietary process that we use to manufacture our annular hose is the result of a long-term development effort begun in 1995. Through continuous improvement over the years, we have developed and fine-tuned the process so that we can manufacture annular flexible metal hose on a high speed, continuous process. We believe that our own rotary process for manufacturing annular corrugated metal hose is the most cost efficient method in the industry, and that our rotary process provides us with a significant advantage in many of the industries in which we participate. As a result, we are able to provide our product on a demand basis. Over the years, the Company has had great success in achieving on-time delivery performance to the scheduled ship date. The quick inventory turnover reduces our costs for in-process inventory, and further contributes to our gross marginprofit levels. We have also improved our productivity on a historical basis.

Raw Materials

We use various materials in the manufacture of our products, primarily stainless steel for our flexible metal hose and plastics for our jacketing material on TracPipe^® CounterStrike^®flexible gas piping and DoubleTrac^®double containment piping, as well as a copper alloy for our MediTrac^®CMT. We also purchase all of our proprietary fittings for use with the TracPipe^® and CounterStrike^®flexible gas piping, DoubleTrac^®double containment piping, and MediTrac^®CMT. Although we have multiple sources qualified for all of our major raw materials and components, we have historically used only one or two sources of supply for such raw materials and components. Our current orders for stainless steel and fittings are each placed with one or two suppliers. If any one of these sources of supply were interrupted for any reason, then we would have to devote additional time and expense in obtaining the same volume of supply from our other qualified sources. This potential transition, if it were to occur, could affect our operations and financial results during the period of such transition. During 2018,2020, the commodity prices of nickel increasedand copper were higher compared to the prior year, while copper was reasonably flat. The Company experienced increases in most of its core components, as our vendors sought to recoup pricing and production burdens.last year. Nickel is a prime material in stainless steel which the Company utilizes to manufacture CSST, and copper is a key component of the Company’s brass fittings and our MediTrac^® CMT. Fortunately, the Company was able to maintain reasonably stable margins during 2018.2020. This was partially accomplished by implementing our own pricing actions to help offset the upward movements in ourthe respective material costs.markets. The supply of our main raw materials appears to be sufficient with ample volume. We believe that with our purchase commitments for stainless steel, polyethylene and for our proprietary fittings, we have adequate sources of supply for these raw materials and components. We have not had difficulty in obtaining the raw materials, component parts or finished goods from our suppliers. We believe that the supply sufficiency of stainless steel will continue until there is a reduction in global capacity, such as mine closures, which would then cause a constriction. Volatility in the commodities marketplace and competitive conditions in the sale of our products could potentially restrict us from passing along raw materials or component part price increases to our customers.

Business Seasonality

The demand for our flexible piping products that are related to construction activity including TracPipe^®, Counterstrike^®, DoubleTrac^® and MediTrac^®, may be affected by the construction industry’s demand, which generally tightens during the winter months of each year due to cold and inclement weather. Accordingly, sales are usually higher in the spring, summer and fall.

Customers

We sell our products to customers scattered across a wide and diverse set of industries ranging from construction to pharmaceutical with over 9,000close to 9,800 customers on record. These sales channels include sales through independent sales representatives, distributors, original equipment manufacturers,OEM, direct sales, and sales through our website on the internet. We utilize various distribution companies in the sale of our TracPipe^® and Counterstrike^®flexible gas piping, and these distribution customers in the aggregate represent a significant portion of our business. In particular, the Company has one significant customer, Ferguson Enterprises, whose various branches had sales in the range of 13% to 15%14% of total sales during the periodperiods of 20162018 to 2018,2020, and was in the range of 19%18% to 22%24% of ourthe Company’s accounts receivable balance over the last two years. All of this business is done on a purchase order basis for immediate resale commitments or stocking, and there are no long-term purchase commitments. In the event we were to lose an account, we would not expect any long-term reduction in our sales due to the broad end-user acceptance of our products. We would anticipate that in the event of a loss of any one or more distributors, that after an initial transition period, the sale of our products would resume at or near their historical levels. Furthermore, in the case of certain national distribution chains, which is the case regarding the Company’s largest customer noted above, and other distributors, it is possible that there would continue to be purchasing activity from one or more regional or branch distribution customers. We sell our products within North America, primarily in the United StatesU.S. and Canada, and we also sell our products internationally, primarily in Europe through our manufacturing facility located in Banbury, England.U.K. Our sales outside of North America were in the range of 10% to 11% of our total sales during the last three years, with most of the sales occurring in the United KingdomU.K. and elsewhere in Europe. We do not have a material portion of our long-lived assets located outside of the United States.U.S.

Distribution of Sales

As mentioned previously, we sell our products primarily through independent outside sales organizations, including independent sales representatives, distributors, fabricating distributors, wholesalers, and original equipment manufacturers (OEMs).OEMs. We have a limited internal sales function that sells our products to key accounts, including OEMs and distributors of bulk hose. We believe that within each geographic market in which the independent sales representative, distributor or wholesaler is located that our outside sales organizations are the first or second most successful outside sales organization for the particular product line within that geographic area.

Competition

There are approximately ten10 manufacturers of flexible metal hose in the United States,U.S., and approximately that number in Europe and Asia. The U. S.U.S. manufacturers include Titeflex Corporation, Ward Manufacturing, Microflex, U. S. Hose,United Flexible, Hose Master and several smaller privately held companies. No one manufacturer, as a general rule, participates in more than two of the major market categories, automotive, aerospace, residential and commercial construction, and general industrial, with most concentrating in just one. We estimate that we are at or near the top position of the two major categories in which we participate in regards to market share. In the flexible gas piping market, the U.S. market is currently concentrated in the residential housing market. Based on the reports issued by the national trade groups on housing construction, the level of acceptance of flexible gas piping in the construction market, and the average usage of flexible gas piping in a residential building, as well as through our sales position within that market, we are able to estimate with a high level of accuracy the size of the total gas piping market. In addition, the Company is a member of an industry trade group, which compiles and distributes sales statistics for its members relative to flexible gas piping. For other applications, industry trade groups collect and report on the size of the relevant market, and we can estimate our percentage of the relevant market based on our sales as compared to the market as a whole. The larger of our two markets, the construction industry, has seen a modest increase in the number of residential housing starts in 2018,2020, as compared to the previous year. As discussed elsewhere, black iron pipe or copper tubing was historically used by all builders of commercial and residential buildings until the advent of flexible gas piping and changes in the relevant building codes. Since that time, flexible gas piping has taken an increasing share of the total amount of fuel gas piping used in construction.

Due to the number of applications in which flexible metal hose may be used, and the number of companies engaged in the manufacture and sale of flexible metal hose, the general industrial market is very fragmented, and we estimate that no one company has a predominant market share of the business over other competitors. In the market for double containment piping, we compete primarily against rigid pipe systems that are more costly to install than DoubleTrac^® double containment piping. For medical tubing applications, the main competitor is medical grade (Type K or Type L) rigid copper pipe. MediTrac^® is the only corrugated medical tubing in the United StatesU.S. that is approved to the stringent requirements of UL 1365. The general industrial markets within Europe are very mature and tend to offer opportunities that are interesting to us in niche markets or during periods in which a weak dollar increases the demand for our products on a competitive basis. Such has been the case for several years and has created new relationships for us. Currently, we are not heavily engaged in the manufacture of flexible metal hose for the aerospace or automotive markets, but we continue to review opportunities in all markets for our products to determine appropriate applications that will provide growth potential and high margins. In some cases, where the product offering is considered a commodity, price is the overriding competing factor. In other cases, a proprietary product offering or superior performance will be the major factors with pricing being secondary, and in some cases, a non-factor. The majority of our sales are to distributors and wholesalers, and our relationships with these customers are on an arms-length basis in that neither we, nor the customers are so dependent on the other to yield any significant business advantage. From our perspective, we are able to maintain a steady demand for our products due to the broad acceptance of our products by end users, regardless of which distributor or wholesaler sells the product.

Backlog

Management does not believe that backlog figures are material to an understanding of our business because most products are shipped promptly after the receipt of orders.

Intellectual Property

We have a comprehensive portfolio of intellectual property, including approximately 240217 patents issued in various countries around the world. The patents cover (a) the fittings used by the flexible gas piping to join the piping to a junction or assembly, (b) pre-sleeved CSST for use in underground applications, (c) an electrically conductive jacket for flexible gas piping that we sell under the trademark CounterStrike^®, and (d) a tubing containment system for our DoubleTrac^® double containment piping, and CMT fittings. In combination,(e) fittings for use with our AutoFlare^® andMediTrac® corrugated medical tubing. Our AutoSnap^® fittings are the leading productsfitting is a prominently used product with flexible gas piping because they offerit offers a metal-to-metal seal between the fitting and the tubing, and because of theirits robustness and ease of use. The metal-to-metal contact provides for a longer lasting and more reliable seal than fittings which use gaskets or sealing compounds that can deteriorate over time. In applications involving fuel gases in a building, the ability to maintain the seal and prevent the leaking of such gases over long periods of time is valued by our customers. In addition, the AutoSnap^® fitting provides the installer with greater ease of use by preassembling all the securing elements inside the body of the fitting. We also have received a patent for the composition of the polyethylene jacket used in our CounterStrike^®flexible gas piping product, which has increased ability to dissipate electrical energy in the event of a nearby lightning strike. The tubing containment system of our DoubleTrac^® double containment piping, which is also patented in the U.S. and in other countries, allows for the monitoring and collection of any liquids that may leak from the stainless steel containment layer. We have filed patent applications for the MediTrac^® fittings to cover the unique requirements in the United StatesU.S. for fittings that permanently affix the fitting to the CMT system, and provides a tamper-proof connection to the CMT system. The expiration dates for the several patentspatent covering our AutoFlare^® fittings will be expiring through 2020 and the Counterstrike^® patent will expire in 2025. We currently have several patent applications pending in the United StatesU.S. and internationally covering improvements to our AutoFlare^® fittings and our CounterStrike^®polyethylene jacket, and also have a patent pending on our new AutoSnapMediTrac^®fitting. Finally, and as mentioned above, our unique rotary process for manufacturing flexible metal hose has been developed over the last tena number of years, and constitutes a valuable trade secret. In 2007, a Pennsylvania court issued a ruling that confirms our proprietary rotary manufacturing process does constitute a “trade secret” under Pennsylvania law, and is entitled to protection against unauthorized disclosure or misappropriation.

Government Regulations including Environmental

The Company believes that its businesses and operations, including its manufacturing plants and equipment, are in substantial compliance with all applicable government laws and regulations, including those related to environmental, consumer protection, international trade, labor and employment, human rights, tax, anti-bribery and competition matters. Any additional measures to maintain compliance are not expected to materially affect the Company’s capital expenditures (including expenditures for environmental control facilities), competitive position, financial position or results of operations.

Various legislative and administrative regulations applicable to the Company in the matters noted above have become effective or are under consideration in many parts of the world. To date, such developments have not had a substantial adverse impact on the Company. However, if new or amended laws or regulations impose significant operational restrictions and compliance requirements upon the Company or its products, the Company’s business, capital expenditures, results of operations, financial condition and competitive position could be negatively impacted. Refer to Item 1A. Risk Factors for further information.

EmployeesHuman Capital

We believe that our employees are the foundation of the innovative ideas necessary for the advancement of our products, and success of our Company. Our employees are the conduits to successful relationships with our customers, vendors and various business partners, as well as the custodians of a safe and efficient operation of our assets ending with a highly satisfied customer. The Company fosters a collaborative, inclusive, and safety-minded work environment, with a focus on ingenuity. We seek to identify the most highly qualified talent for our organization, enabling us to execute on our strategic objectives of providing the most innovative and technologically advanced flexible metal hose products in the market. To attract and retain employees, the Company offers competitive wages across all levels, and maintains a superior package of employee benefits, including medical insurance, life insurance, and retirement and savings programs, for all employees, as well as executive compensation plans as described in our proxy statement.

As of December 31, 2018,2020, the Company had 151164 employees. Most of our employees are located in our manufacturing facilities in Exton, Pennsylvania, which contain our factory personnel, engineering, finance, human resources and most of our sales staff. Our factory workforce in Exton, Pennsylvania, is not party to a collective bargaining agreement. A small amountnumber of employees work at our facility in Houston, Texas. We also maintain an office in Middletown, Connecticut where certain management, sales and administrative personnel reside.are assigned. A number of individual sales personnel are also scattered across the United States.U.S.. We also maintain a manufacturing facility in Banbury, England,U.K., which contains employees of similar functions to those in the U.S., but on a much smaller scale.scale, including a small presence in France. The sales personnel in England and France handle all sales and service for our products in Europe, most notably the United Kingdom,U.K., and the majority of our transactions with other international territories.

EnvironmentalWe are committed to fostering a work environment in which all employees treat each other with dignity and respect. This commitment extends to providing equal employment and advancement opportunities based on merit and experience. We continually strive to attract a diverse workforce by partnering with local organizations to identify potential candidates to advance and strengthen our human capital management program.

Our manufacturing processes do not require the use of significant quantities of hazardous substances or materials, and therefore we are able to operate our Exton facility as a “small quantity generator” under the Resource Conservation and Recovery Act, 42 U.S.C. §§ 321et seq.As a result, compliance with federal, state and local environmental laws do not pose a material burden on our business, and we are not required to expend any material amounts on capital expenditures for environmental control facilities for our manufacturing facility.

Internet Website

You may learn more about our company by visiting our website at www.omegaflexcorp.com. Among other things, you can access our filings with the Securities and Exchange Commission, which maintains a website atwww.sec.gov that contains the Company’s various reports, proxy and information statements. These filings include proxy statements, annual reports (Form 10-K), quarterly reports (Form 10-Q), and current reports (Form 8-K), as well as Section 16 reports filed by our officers and directors (Forms 3, 4 and 5). All of these reports will be available on the website as soon as reasonably practicable after we file the reports with the SEC. In addition, we have made available on our website under the heading “Compliance Policies” the charters for the Audit, Compensation and Nominating/Governance Committees of our Board of Directors and our Code of Business Ethics. We intend to make available on our website any future amendments or waivers to our Code of Business Ethics. The information on our website is not part of this report.

Item 1A – RISK FACTORS

You should carefully consider the following risk factors and all the other information contained in this annual report and our other filings in evaluating our business and investment in our common stock. We have not disclosed general risk factors that may be applicable to any for-profit organization, such as general economic conditions, interest rates, labor supply and technological changes. Investors are cautioned to take into consideration the specific risk factors we have disclosed below and general risk factors before making an investment decision.

Risk Relating to Our Business – Sales and Competition

We are primarily dependent on one product line for most of our sales.

Most of the Company’s sales are derived from the sale of TracPipe^®and CounterStrike^®flexible gas piping systems, including Autoflare^® and AutoSnap^®fittings and a variety of accessories. Sales of our flexible metal hose for other applications represent a small portion of our overall sales and income. Any event or circumstance that adversely affects our TracPipe^® or CounterStrike^® flexible gas piping could have a greater impact on our business and financial results than if our business were more evenly distributed across several different product lines. The effects of such an adverse event or circumstance would be magnified in terms of our Company as a whole as compared to one or more competitors whose product lines may be more diversified, or who are not as reliant on the sales generated by their respective flexible gas piping products. Therefore, risks relating to our TracPipe^®and CounterStrike^®flexible gas piping business – in particular loss of distributors or sales channels, technological changes, changes in applicable code requirements, loss of our key personnel involved in the flexible gas piping product line, increases in commodity prices, particularly in stainless steel and polyethylene – could pose a significant risk to our competitive position, results of operations or financial condition.

Our manufacturing plant(s) may be damaged or destroyed.

The majority of the company’s manufacturing capacity is currently located in Exton, Pennsylvania, where we own two manufacturing facilities which are in close proximity to each other, and in Banbury, United Kingdom where we rent a manufacturing facility. On a smaller scale the Company also manufactures product in Houston, Texas. We do not have any operational manufacturing capacity for flexible metal hose outside of these locations. We cannot replicate our manufacturing methods at a supplier’s facility due to the confidential and proprietary nature of our manufacturing process. If one of the manufacturing facilities were destroyed or damaged in a significant manner, we would likely experience a delay or some interruption of our flexible metal hose operations. This could lead to a reduction in sales volume if customers were to purchase their requirements from our competitors, claims for breach of contract by certain customers with contracts for delivery of flexible metal hose by a certain date, and costs to replace our destroyed or damaged manufacturing capacity. The fittings and accessories for the flexible metal hose are manufactured for us by suppliers not located in Exton, Pennsylvania, and the company also has outside warehouses which contain finished goods inventory. Disruption of or damage to our supply of these items could damage our business, competitive position, results of operations or financial condition.

We are dependent on certain raw materials and supplies that could be subject to volatile price escalation.

As a manufacturer of flexible metal hose, we must use certain raw materials in the manufacture of the hose. The primary raw material is stainless steel that is used in the forming of the hose, and various other steel products used in the wire braid overlay over some flexible metal hoses for additional strength and durability, as well as copper alloy for MediTrac^® CMT. We also use polyethylene in pellet form for the forming and extrusion of a polyethylene jacket over CSST for use in fuel gas applications, underground installations, and other installations that require that the metal hose be isolated from the environment. Finally, we also purchase our proprietary brass fittings used with the flexible metal hose that provide a mechanical means of attaching the hose to an assembly or junction. We attempt to limit the effects of volatile raw material prices, and to ensure adequate and timely supply of material, by committing to annual purchase contracts for the bulk of our steel and polyethylene requirements, and for our fitting requirements. The contracts typically represent a significant portion of the Company’s annual planned usage, and are set at a designated fixed price or a range of prices. These agreements sometimes require the Company to accept delivery of the commodity in the quantities committed, at the agreed upon prices. Transactions in excess of the pre-arranged commitments are conducted at current market prices at the Company’s discretion. The Company has identified multiple qualified vendors to produce or manufacture our critical purchase requirements. The Company does however tend to rely on one or two sources for each or our primary components to leverage the relationship and pricing. Therefore, there is no assurance that the Company would be able to eliminate all or most of the adverse effects of a sudden increase in the cost of materials or key components, or that the loss of one or more of our key sources would not lead to higher costs or a disruption in our business.

Susceptibility of litigation and significant legal costs or settlements.

In the ordinary and normal conduct of the Company’s business, it is subject to periodic lawsuits, investigations and claims (collectively, the “Claims”). The Company has continued to receive repeat pattern Claims relating to our flexible gas piping products, although the pace of the new Claims has declined. While the Company does not believe the Claims have legal merit, and has successfully defended itself vigorously against such Claims, there is no guarantee that the pace of claims will not increase or subside. Any significant increase in the number of Claims, the financial magnitude of Claims brought against the Company, the costs of defending the Claims, particularly under higher retentions of the Company’s current product liability insurance policies, could have a detrimental impact on the Company’s business, competitive position, results of operations or financial condition, perhaps materially.

We face intense competition in all of our markets.

The markets for flexible metal hose are intensely competitive. There are a number of competitors in all markets in which we operate, and generally none of these markets have one dominant competitor – rather a large number of competitors exist, each having a proportion of the total market. One or more of our competitors may develop technologies and products that are more effective or which may cost less than our current or future products, or could potentially render our products noncompetitive or obsolete. Our prior success has been due to our ability to develop new products and product improvements, and establish and maintain an effective distribution network which to some extent came at the expense of several competing manufacturers. Our business, competitive position, results of operations or financial condition could be negatively impacted if we are unable to maintain and develop our competitive products.

We may not retain our independent sales organizations.

Almost all of the Company’s products and product lines are sold by outside sales organizations. These independent sales organizations or sales representatives are geographically dispersed in certain territorial markets across the United States,U.S., Canada and elsewhere. These outside sales organizations are independent of us, and are typically owned by the individual principals of such firms. We enter into agreements with such outside sales organizations for the exclusive representation or distribution of our products, but such agreements are generally for terms of one year or less. At the expiration of the agreement, the agent or distributor may elect to represent a different manufacturer. As a result, we have no ability to control which flexible metal hose manufacturer any such sales organization may represent or carry. The competition to retain quality outside sales organizations is also intense between manufacturers of flexible metal hose since it is these sales organizations that generally can direct the sales volume to distributors and, ultimately, contractors and installers in important markets across the country, and in other countries in which we operate. The failure to obtain the best outside sales organization within a particular geographic market can limit our ability to generate sales of our products. While we currently have a fully developed sales and distribution network of superior outside sales organizations, there can be no assurance that any one or more of the outside sales organizations will elect to remain with us, or that our competitors will not be able to disrupt our distribution network by causing one or more of our sales representatives to drop our product lines. Our business, competitive position, results of operation or financial condition could be negatively impacted if we cannot maintain adequate sales and distribution networks.

We are dependent on certain sales channels for a significant portion of our business.

Of the various sales channels that we use to sell our products, a significant portion of such sales are made through our wholesale stocking distributors that include Ferguson Enterprises and several other distributors. These and other distributors purchase our products, and stock the goods in warehouses for resale, either to their own local branches or to end-users. Because of the breadth and penetration of the distribution networks, and the range of complementary products they offer for sale, these wholesale distributors are able to sell large amounts of our products to end users across the United StatesU.S. and Canada. The decision by a major wholesaler distributor to stop distributing our products such as TracPipe^®and CounterStrike^®flexible gas piping, and to distribute a competitive flexible gas piping product, could significantly affect our business, competitive position, results of operations or financial condition.

Our business may be subject to the supply and availability of fuel gas supplies and infrastructure.

Our TracPipe^®and CounterStrike^®flexible gas piping products are used to convey fuel gas, primarily natural gas, but also propane, within a building from the exterior wall of the building to any gas-fired appliances within the building. Because those products are used in the transmission of fuel gas, the applications are limited to geographic areas where such fuel gas is available. Certain geographic areas of the United States and other countries do not have the infrastructure to make natural gas available. Other types of fuel gas may be used in areas where there are no natural gas pipelines, but these alternate fuel gas sources have other distribution issues that may constrict their availability. Our prospects for future growth of the TracPipe^®and CounterStrike^®products are largely limited to those areas that have natural gas transmission lines available for use in residences and commercial buildings.

If we are not able to protect our intellectual property rights, we may not be able to compete as effectively.

We possess a wide array of intellectual property rights, including patents, trademarks, copyrights, and applications for the above, as well as trade secrets, manufacturing know-how, and other proprietary information. Certain of these intellectual property rights form the basis of our competitive advantage in the market place through a superior product design, a superior business process, superior manufacturing methods or other features that provide an advantage over our competitors. The intellectual property rights are sometimes subject to infringement or misappropriation by other organizations, and failing an amiable resolution, we may be forced to resort to legal proceedings to protect our rights in such intellectual property.

In the past, the Company has needed to protect itself and resort to legal action, in one instance regarding a trade secret, and in another where we sued a flexible gas pipe competitor for infringement on one or more of our U.S. patents covering our AutoFlare^®fittings. In both instances, the Company received favorable rulings, thus solidifying the validity of our intellectual property. Although the Company has had past success, the results we may obtain from resorting to any such legal proceedings are never assured, and it is possible that an adverse decision may be delivered in any particular proceeding. As a result, we may not be able to retain the exclusive rights to utilize and practice such intellectual property rights, and one or more of our competitors could utilize and practice such intellectual property rights. This development may lessen our competitive advantage vis-à-vis one or more competitors, and lead to a reduction in sales volume in one or more product lines, a reduction in profit margin in such product lines, or both.

If we were to lose the services of one or more of our senior management team, we may not be able to execute our business strategy

Our future success depends in a large part upon the continued service of key members of our senior management team. The senior executives are critical to the development of our products and our strategic direction, and have a keen knowledge of business operations and processes. Their unique abilities, experience and expertise cannot be easily duplicated or replaced. As much as possible, senior executives strive to educate and develop other layers of staff and succession planning, but the loss of any of our senior management could seriously harm our business.

Certain of our competitors may have greater resources, or they may acquire greater resources.

Some of our competitors have substantially more resources than are available to us as a stand-alone company. For example, in the CSST market, two of our competitors are divisions of large corporations with revenues measured in the billions of dollars. These competitors may be able to devote substantially greater resources to the development, manufacture, distribution and sale of their products than would be available to us as a stand-alone company. One or more competitors may acquire several other competitors, or may be acquired by a larger entity, and through a combination of resources be able to devote additional resources to their businesses. These additional resources could be devoted to product development, reduced costs in an effort to obtain market share, greater flexibility in terms of profit margin as part of a larger business organization, increased investment in plant, machinery, distribution and sales concessions. As a stand-alone company, the resources that may be devoted by us to meet any potential developments by larger, well-financed competitors may be limited.

Our business may be subject to the impact of Brexit.

The Company’s main operating subsidiary, Omega Flex Limited, is headquartered in Banbury, England in the U.K. The result of the referendum held by the U.K. to withdraw from the European Union (“Brexit”) had created a level of uncertainty regarding the final terms of that withdrawal for a number of years, until an agreement was reached on December 24, 2020 by the U.K. and the European Union. While an agreement was reached, uncertainty still exists, and adherence to the new rules regarding border and customs controls could increase costs on materials imported into the U.K. and finished goods exported from the U.K. In addition, it is possible that logistical delays created by those controls could delay shipments of materials and supplies into the Banbury manufacturing plant, and could also affect our ability to ship goods to customers outside of the U.K., into the European Union, Africa, and the Near East. Most of the business of Omega Flex Limited is domestic, and should therefore not be unduly disrupted. However, the macroeconomic effects of Brexit on the economies of the U.K. and the European Union remain partially unknown, and those effects could dampen economic activity and the overall demand for the Company’s products in those markets. However, it is not expected that increased costs, logistical delays, nor possible economic declines in those markets would be material to the Company.

Our business may be subject to macroeconomic effects caused by increased trade tariffs and reduced international trade.

Recent events have caused various governments around the world to impose increased trade tariffs on imported goods. These increased tariffs may cause the cost of materials to rise and may add additional expense on exported goods. However, the company does not believe that increased tariffs will materially affect the company’s sales or gross profits, as most of the raw materials and supplies used to manufacture our products are sourced domestically in the U.S.. Further, exports of our flexible gas piping products from our Exton, Pennsylvania facility are primarily to Canada, which recently agreed to a revised North American trade treaty, and to a lesser extent to the Caribbean and South America. Sales to Europe, Asia and Africa are primarily handled from our Banbury, England facility, which are not affected by U.S. trade tariffs and retaliatory tariffs, but may be subject to other constraints as discussed in the Brexit risk factor, above.

Risk Relating to Our Business – Manufacturing and Operations

Our manufacturing plant(s) may be damaged or destroyed.

The majority of the company’s manufacturing capacity is currently located in Exton, Pennsylvania, where we own two manufacturing facilities which are in close proximity to each other, and in Banbury, England in the U.K. where we rent a manufacturing facility. On a smaller scale the Company also manufactures product in Houston, Texas. We do not have any operational manufacturing capacity for flexible metal hose outside of these locations. We cannot replicate our manufacturing methods at a supplier’s facility due to the confidential and proprietary nature of our manufacturing process. If one of the manufacturing facilities were destroyed or damaged in a significant manner, we would likely experience a delay or some interruption of our flexible metal hose operations. This could lead to a reduction in sales volume if customers were to purchase their requirements from our competitors, claims for breach of contract by certain customers with contracts for delivery of flexible metal hose by a certain date, and costs to replace our destroyed or damaged manufacturing capacity. The fittings and accessories for the flexible metal hose are manufactured for us by suppliers not located in Exton, Pennsylvania, and the Company also has outside warehouses which contain finished goods inventory. Disruption of or damage to our supply of these items could damage our business, competitive position, results of operations or financial condition.

We are dependent on certain raw materials and supplies that could be subject to volatile price escalation.

As a manufacturer of flexible metal hose, we must use certain raw materials in the manufacture of the hose. The primary raw material is stainless steel that is used in the forming of the hose, and various other steel products used in the wire braid overlay over some flexible metal hoses for additional strength and durability, as well as copper alloy for MediTrac^® CMT. We also use polyethylene in pellet form for the forming and extrusion of a polyethylene jacket over CSST for use in fuel gas applications, underground installations, and other installations that require that the metal hose be isolated from the environment. Finally, we also purchase our proprietary brass and stainless steel fittings used with the flexible metal hose that provide a mechanical means of attaching the hose to an assembly or junction. We attempt to limit the effects of volatile raw material prices, and to ensure adequate and timely supply of material, by committing to annual purchase contracts for the bulk of our steel and polyethylene requirements, and for our fitting requirements. The contracts typically represent a significant portion of the Company’s annual planned usage, and are set at a designated fixed price or a range of prices. These agreements sometimes require the Company to accept delivery of the commodity in the quantities committed, at the agreed upon prices. Transactions in excess of the pre-arranged commitments are conducted at current market prices at the Company’s discretion. The Company has identified multiple qualified vendors to produce or manufacture our critical purchase requirements. The Company does however tend to rely on one or two sources for each or our primary components to leverage the relationship and pricing. Therefore, there is no assurance that the Company would be able to eliminate all or most of the adverse effects of a sudden increase in the cost of materials or key components, or that the loss of one or more of our key sources would not lead to higher costs or a disruption in our business, which could damage our business, competitive position, results of operations or financial condition.

If we were to lose the services of one or more of our senior management team, we may not be able to execute our business strategy

Our future success depends in a large part upon the continued service of key members of our senior management team. The senior executives are critical to the development of our products and our strategic direction, and have a keen knowledge of business operations and processes. Their unique abilities, experience and expertise cannot be easily duplicated or replaced. As much as possible, senior executives strive to educate and develop other layers of staff and succession planning, but the loss of any of our senior management could seriously harm our business.

Risk Relating to Our Business – Legal

Susceptibility of litigation and significant legal costs or settlements.

In the ordinary and normal conduct of the Company’s business, it is subject to periodic lawsuits, investigations and claims (collectively, the “Claims”). The Company has continued to receive repeat pattern Claims relating to our flexible gas piping products, although the pace of the new Claims has generally declined over the last several years. While the Company does not believe the Claims have legal merit, and has successfully defended itself vigorously against such Claims, there is no guarantee that the pace of claims will not increase or subside. Any significant increase in the number of Claims, the financial magnitude of Claims brought against the Company, the costs of defending the Claims, particularly under higher retentions of the Company’s current product liability insurance policies, could have a detrimental impact on the Company’s business, competitive position, results of operations or financial condition, perhaps materially.

If we are not able to protect our intellectual property rights, we may not be able to compete as effectively.

We possess a wide array of intellectual property rights, including patents, trademarks, copyrights, and applications for the above, as well as trade secrets, manufacturing know-how, and other proprietary information. Certain of these intellectual property rights form the basis of our competitive advantage in the market place through a superior product design, a superior business process, superior manufacturing methods or other features that provide an advantage over our competitors. The intellectual property rights are sometimes subject to infringement or misappropriation by other organizations, and failing an amiable resolution, we may be forced to resort to legal proceedings to protect our rights in such intellectual property.

In the past, the Company has needed to protect itself and resort to legal action, in one instance regarding a trade secret, and other instances where we sued flexible gas pipe competitors for infringement on one or more of our U.S. patents covering our various piping and/or fitting products. In each instance, the Company received favorable rulings, thus solidifying the validity of our intellectual property. Although the Company has had past success, the results we may obtain from resorting to any such legal proceedings are never assured, and it is possible that an adverse decision may be delivered in any particular proceeding. As a result, we may not be able to retain the exclusive rights to utilize and practice such intellectual property rights, and one or more of our competitors could utilize and practice such intellectual property rights. This development may lessen our competitive advantage vis-à-vis one or more competitors, and lead to a reduction in sales volume in one or more product lines, a reduction in profit margin in such product lines, or both, which would damage our business, competitive position, results of operations or financial condition.

Risk Relating to Our Business – General and Macroeconomic

Our business may be subject to the supply and availability of fuel gas supplies and infrastructure.

With increasing debate on the effect of human activities on climate change, there has been a focus on transitioning energy and heating in buildings away from fossil fuels, such as natural gas and liquid propane. Several municipalities in the U.S. have announced policy decisions to move away from fossil fuel applications in the future, including prohibiting the new installation of appliances fueled by natural gas or liquid propane. Although there are significant technical and economic hurdles, it is possible that a large scale movement, in individual cities and states or on a federal level, away from fossil fuels may increase in the future. Such moves could reduce the demand for our flexible gas piping products that carry natural gas or liquid propane from the building’s meter to the gas-fired appliance, which represent a major part of the company’s sales and net profits. As a result, it is possible in the future that proposals to limit or eliminate the use of fossil fuels could adversely impact the financial results of the company, perhaps materially.

Our TracPipe^® and CounterStrike^® flexible gas piping products are used to convey fuel gas, primarily natural gas, but also propane, within a building from the exterior wall of the building to any gas-fired appliances within the building. Because those products are used in the transmission of fuel gas, the applications are limited to geographic areas where such fuel gas is available. Certain geographic areas of the U.S. and other countries do not have the infrastructure to make natural gas available. Other types of fuel gas may be used in areas where there are no natural gas pipelines, but these alternate fuel gas sources have other distribution issues that may constrict their availability. Our prospects for future growth of the TracPipe^® and CounterStrike^® products are largely limited to those areas that have natural gas transmission lines available for use in residences and commercial buildings.

We may substantially increase our debt in the future, or be restricted from accessing funds.

We are currently not carrying any long-term debt, although the Company has a line of credit facility available for use as described in Note 5, Line of Credit, to the financial statements.Consolidated Financial Statements included in this report. We may consider borrowing funds for purposes of working capital, capital purchases, research and development, potential acquisitions and business development. If we do use credit facilities, interest costs associated with any such borrowings and the terms of the loan could potentially adversely affect our profitability. Additionally, the current line of credit has debt covenants associated with it which may restrict the level of borrowing the Company may take on. Lack of access to financing, or desirable terms or at all, could damage our business, competitive position, results of operations or financial condition.

Changes in the method pursuant to which the LIBOR rates are determined and potential phasing out of LIBOR after 2021 may affect our financial results.

Borrowings under our line of credit facility bear interest at variable rates based on LIBOR. LIBOR and certain other interest “benchmarks” may be subject to regulatory guidance and/or reform that could cause interest rates under our current or future debt agreements to perform differently than in the past or cause other unanticipated consequences. The United Kingdom’sU.K.’s Financial Conduct Authority, which regulates LIBOR, has announced that it intends to stop encouraging or requiring banks to submit rates for the calculation of LIBOR rates after 2021, and it is unclear if LIBOR will cease to exist or if new methods of calculating LIBOR will evolve. Currently, the Federal Reserve Bank is considering options and transitioning away from LIBOR, and as such, has formed the Alternative Rates Committee (ARRC). The ARRC selected the Secured Overnight Financing Rate (SOFR) as an appropriate replacement. SOFR is based on transactions in the overnight repurchase markets, which reflects a transaction-based rate on a large number of transactions, better reflecting current financing costs. If LIBOR ceases to exist or if the methods of calculating LIBOR change from their current form, or if new methods are implemented such as SOFR, interest rates on our current or future debt obligations may be adversely affected.

Our business may be subject to varying demands based on market interest rates.

Our TracPipe^®and CounterStrike^®flexible gas piping products are used in the construction industry, both in residential, commercial and industrial segments, for the piping of fuel gas within a building. The demand for new or remodeled construction in the construction industry – and in particular the residential construction industry – is susceptible to fluctuations in interest rates charged by banks and other financial institutions as well as consumer demand. The purchasers of new or remodeled construction generally finance the construction or acquisition of the residential, commercial or industrial buildings, and any increase in the interest rates on such financing will raise the acquisition cost of the potential purchaser. While interest rates have been reasonablyare currently low, overthere is no guarantee that will remain the recent past, they have increased slightly overcase in the last year.future. If costs increase significantly, a higher amount of potential buyers may not be able to support the level of financing under a higher interest rate environment. Increased acquisition costs may lead to a decline in the demand for new or remodeled construction, and as a result may also lead to a reduced demand for our products used in construction industry.industry, which could damage our business, competitive position, results of operations or financial condition.

Our business may be subject to cyclical demands.

The demand for our products may be subject to cyclical demands in the markets in which we operate. Our customers who use our products in industrial and commercial applications are generally manufacturing capital equipment for their customers. Similarly, our TracPipe^®and CounterStrike^®flexible gas piping products are used primarily in residential construction, both in single-family buildings, and in larger multi-unit buildings. Should there be any change in factors that affect the rate of new residential construction, our growth rate would likely be impacted. To the extent that interest rates increase, in conjunction with an economic cycle or as part of the general economic conditions in the United StatesU.S. or abroad, the demand for our products in such applications may decrease as well.well, which could damage our business, competitive position, results of operations or financial condition.

Our business may be subject to seasonal or weather related factors.

The demand for our products may be affected by factors relating to seasonal demand for the product, or a decline in demand due to inclement weather. Our TracPipe^®and CounterStrike^®flexible gas piping products are installed in new or remodeled buildings, including homes, apartment buildings, office buildings, warehouses, and other commercial or industrial buildings. Generally, the rate of new or remodeled buildings in the United StatesU.S. and in the other geographic markets in which we are present decline in the winter months due to the inability to dig foundations, problems at the job site relating to snow, or generally due to low temperatures and stormy weather. As the rate of construction activity declines during the winter, the demand for our corrugated stainless steel tubing may also decrease or remain static.

The concentration of ownership of our common stock may depresscould impact its market price.

ApproximatelyAt December 31, 2020, approximately 71% of the issued and outstanding common stock is owned or controlled by inside affiliated parties to the Company, with the largest being: The Estate of John E. Reed, Stewart B. Reed, Kevin R. Hoben and Mark F. Albino. Stewart B. Reed currently serves on the Board of Directors, where he presidedpresides as Chairman until December 2018, andVice Chairman. Mr. Hoben and Mr. Albino also serve on the Board of Directors, with Mr. Hoben being the Chairman of the Board, and both are officers of the Company. Mr. Hoben was elevated to Chairman in December 2018. This concentration of ownership may have the effect of reducing the volume of trading of the common stock on the NASDAQ, whichNASDAQ. A decrease in trading volume could result in lower prices for the common stock because there is not a sufficient supply of shares to create a vibrant market for our shares on the NASDAQ.NASDAQ, or inversely could drive the common stock price higher when demand exceeds supply.

The concentration of ownership of common stock could exert significant influence over matters requiring shareholder approval, including takeover attempts.

Because of their significant ownership of our common stock, our officer and directors and their respective affiliates may, as a practical matter, be able to exert influence over matters requiring approval by our shareholders, including the election of directors and the approval of mergers or other business combinations. This concentration also could have the effect of delaying or preventing a change in control of the Company.

TheOur business may be subject to the impact of currency volatility.

The Company has operations in the United Kingdom,U.K., and does business transactions elsewhere in the world outside of the United States.U.S.. While the magnitude of these transactions outside of the United StatesU.S. have thus far not been significant, and typically not in currencies of high volatility, it is possible that they could be material. In June 2016, the United Kingdom made the decision to leave the European Union, an event commonly knownEvents such as Brexit. As a resultBrexit, as described below, or other instances of Brexit, and the political and economicaleconomic turmoil or uncertainty, that ensued, thecould create a weakened British Pound weakened(“BP”) in comparison to other currencies. ThisA weakened BP would in turn hadhave a direct negative impact on the Company’s financial statements, and results, as we experiencedwould experience losses when settling transactions in other currencies, and experiencedexperience unfavorable results due to the translation of financial statements with a lower exchange rate. During 20172019 and 2018 the2020 there was not any notable impact ofdue to currency volatility on the financial statements, was not as severe, but going forward, it is possible that the British Pound,BP, other currencies that we engage in, or even the USU.S. Dollar may weaken, and materially impact the financial position, operations and liquidity of the Company.

Cybersecurity.A cyber attack or other computer system breach could harm us.

In recent years, the topic of cybersecurity, or the lack thereof, has been an issue of high concern. The Company currently maintains a robust firewall and other safeguards to either prevent or detect against nefarious actors looking to breach or infiltrate our data, and has backup systems in place. The Company’s website is housed and maintained by a third party who maintain their own controls. The Company currently has a very low volume of sales coming through the internet, and processes very few credit card transactions. While it currently appears that the Company has a low level of risk related to cybercrime, the vulnerability still exists and could affect the Company negatively.

Brexit.The COVID-19 pandemic has begun to affect and may continue to affect the business.

The ongoing global outbreak of coronavirus, which was declared a pandemic by the World Health Organization on March 11, 2020 and a national emergency by the President of the United States on March 13, 2020, has caused and is continuing to cause business slowdowns and shutdowns and turmoil in the financial markets both in the United States and abroad. The Company is monitoring the impact of the COVID-19 pandemic on its business, including how it has impacted and will impact the Company’s main operating subsidiary, Omega Flex Limited,employees, customers, suppliers and distribution channels. The COVID-19 pandemic, as well as the quarantines and other governmental and non-governmental restrictions that have been imposed throughout the world in an effort to contain or mitigate the spread of the coronavirus, has created significant volatility, uncertainty and economic disruption which has begun to affect and may continue to affect the Company’s business. For example, governmental authorities in several jurisdictions have ordered the cessation of all business activity that is headquartereddeemed non-essential and, although the Company’s business has to date been deemed essential in Banbury, England. many affected markets, there is a risk that these shutdown orders will be extended or expanded or that similar shutdown orders will be implemented in other regions.

The Company is currently navigating through this unprecedented crisis without any government support from the U.S. Small Business Administration’s Paycheck Protection Program (“PPP”), and the nature and magnitude of the COVID-19 pandemic’s ultimate impact on the Company will depend on numerous evolving factors, future developments and cascading effects of the coronavirus pandemic that the Company is not able to predict, including: the duration and severity of the COVID-19 pandemic and the international actions and business restrictions that are being undertaken and implemented as a result of it; governmental, business and other responses to the COVID-19 pandemic, including the promotion of “social distancing,” the issuance of shelter in place orders and restrictions on the Company’s operations, and the possibility that government officials may mandate that the Company provide products or services; potential disruptions in the Company’s supply chain; the impact of the COVID-19 pandemic on the Company’s ability to execute its short-term and long-term business strategies and initiatives; the extent to which forced remote working arrangements reduce the Company’s ability to manage its business effectively; the extent to which staffing shortages due to members of the Company’s workforce being quarantined or exposed to the coronavirus may be detrimental to the Company’s operations; and the Company’s ability to maintain current levels of skilled headcount without the proceeds of a loan under the PPP (a “PPP Loan”) as a source of additional liquidity. Furthermore, while the Company timely returned the proceeds of a PPP Loan that it initially received out of an abundance of caution in reliance on U.S. Treasury Department and Small Business Administration guidance that companies were able to do so without penalty, as the COVID-19 pandemic unfolds, federal or state governments (including government agencies such as the Treasury Department, the Small Business Administration or the Securities and Exchange Commission) could promulgate new statutes, regulations, guidance or relief measures, or rescind or modify existing statutes, regulations, guidance or relief measures, in a way that is detrimental to the Company or its business, including as a result of the referendum held byCompany’s prior application for a loan under the United Kingdom to withdraw fromPPP.

In addition, while the European Union (“Brexit”) has created a levelCompany cannot predict the magnitude of uncertainty regarding the final terms ofimpact that withdrawal that has not yet been agreed upon by the United KingdomCOVID-19 pandemic will have on its customers and the European Union. If there are no negotiated terms of withdrawal reached by the parties by March 29, 2019 (the Brexit deadline), then one possible result of that impasse could be the re-imposition of border and customs controlssuppliers or their financial conditions, any material effect on the movementCompany’s customers or suppliers could adversely impact the Company. For example, the Company’s customers or suppliers may themselves assert, or attempt to terminate various agreements and arrangements with us on the basis of, peoplecontractual force majeure provisions, and goods betweenany termination of a significant commercial agreement may adversely harm our operations. Additionally, the United KingdomCOVID-19 pandemic and European Union,related travel restrictions and other containment efforts have had a significant impact on the resttravel industry, which may result in reduced demand for products. The impact of the world. These borderCOVID-19 pandemic may also exacerbate other risk factors in this Item 1A, any of which could have a material effect on the Company. For example, the risks associated with potential cybersecurity threats may be magnified given the increase in the number of Company employees working remotely using personal electronic devices and customs controlshome internet connections.

The extent of the impact of the COVID-19 pandemic on the Company’s business is highly uncertain and difficult to predict, as information is rapidly evolving with respect to the duration and severity of the COVID-19 pandemic. At this point, the Company cannot reasonably estimate the duration and severity of the COVID-19 pandemic or its overall impact on the Company’s business.

Various other general and macroeconomic issues may impact the business

Conflicts, wars, natural disasters, infectious disease outbreaks (see Pandemic above) or terrorist acts could increase costs on materials imported intoalso cause significant damage or disruption to our operations, employees, facilities, systems, suppliers, supply chain, distributors, resellers or customers in the United KingdomU.S. and finished goods exported from the United Kingdom. In addition, it is possible that logistical delays created by those controls could delay shipmentsinternationally for extended periods of materials and supplies into the Banbury manufacturing plant,time and could also affect our ability to ship goods to customers outside of the UK, into the European Union, Africa, and the Near East. Omega Flex Limited has stockpiled materials and supplies for its manufacturing operations in Banbury ahead of the Brexit deadline, and are positioned to stage some finished goods inventory in warehouses in the European Union, in an attempt to cushion the possible impact of the re-imposition of boarder and customs’ controls. Most of the business of Omega Flex Limited is domestic, and should therefore not be unduly disrupted. However, the macroeconomic effects of Brexit on the economies of the United Kingdom and the European Union are unknown, and those effects could dampen economic activity and the overall demand for the Company’s products in those markets. However, it is not expected that increased costs, logistical delays, nor possible economic declines in those markets would be material to the Company.

Our business may be subject to macroeconomic effects caused by increased trade tariffs and reduced international trade.

Recent events have caused various governments around the world to impose increased trade tariffs on imported goods. These increased tariffs may cause the cost of materials to rise and may add additional expense on exported goods. However, the company does not believe that increased tariffs will materially affect the company’s sales or operating margins, as most of the raw materials and supplies used to manufacture our products are sourced domestically in the United States. Further, exports of our flexible gas piping products from our Exton, Pennsylvania facility are primarily to Canada, which recently agreed to a revised North American trade treaty, and to a lesser extent to the Caribbean and South America. Sales to Europe, Asia and Africa are primarily handled from our Banbury, England facility, which are not affected by U.S. trade tariffs and retaliatory tariffs, but may be subject to other constraints as discussed in theBrexit risk factor, above.products.

Item 1B – UNRESOLVED STAFF COMMENTS

None.

Item 2 - PROPERTIES

The Company utilizes two facilities in Exton, Pennsylvania, which is located aboutapproximately one hour west of Philadelphia. One facility which is owned by the Company, contains about 83,000 square feet of manufacturing and office space. The other facility which is located nearby provides another 30,000 square feet of space, mostly used for manufacturing. The Company previously had a rental agreement running through January 2018 for this facility, but in early 2017 consummated an agreement to purchase the land and structure for cash. The majority of the manufacturing of our flexible metal hose is performed at the Exton facilities. Also within the US,U.S., the Company leases a facility in Houston, Texas, which contains manufacturing, stocking and sales operations, and a corporate office located in Middletown, Connecticut. In the United Kingdom,U.K., the Company rents a facility in Banbury, England, which manufactures products and serves sales, warehousing and operational functions as well.

Item 3 - LEGAL PROCEEDINGS

In the ordinarySee legal proceedings disclosure in Note 10, Commitments and normal conduct of the Company’s business, it is subject to periodic lawsuits, investigations and claims (collectively, the “Claims”). Most of the Claims, including a putative class-action claim, relate to potential lightning damage to our flexible gas piping products, which impact legal and product liability related expenses. The Company does not believe the Claims have legal merit, and therefore has commenced a vigorous defense in responseContingencies, to the Claims. It is possible that the Company may incur increased litigation costs in the future due to a variety of factors, including a higher numbers of Claims, higher legal costs, and higher insurance deductibles or retentions.

In 2010, the Company took its first Claim to trial in Pennsylvania, and the jury returned a verdict that the Company was not negligent in designing and selling the TracPipe^® product, but also returned a verdict for plaintiff on strict liability. The Company appealed that portion of the verdict, and in December 2014, the Supreme Court of Pennsylvania ruled in favor of the Company, and returned the case to the trial court for further hearings. The cash bond of $1,600,000, which was previouslyConsolidated Financial Statements included in Other Long Term Assets and posted as security for a subsequent appeal, was returned to the Company in May 2018. This case was finally settled and closed on August 7, 2018.

In March 2017, a putative class action case was re-filed against the Company and other parties in Missouri state court after the predecessor case was dismissed without prejudice by the federal court. The Company successfully removed the case to federal court and is currently vigorously defending the case.

The Company has in place commercial general liability insurance policies that cover most Claims, which are subject to deductibles or retentions, ranging primarily from $25,000 to $1,000,000 per claim (depending on the terms of the policy and the applicable policy year), up to an aggregate amount. Litigation is subject to many uncertainties and management is unable to predict the outcome of the pending suits and claims. The potential liability for a given claim could range from zero to a maximum of $1,000,000, depending upon the circumstances, and insurance deductible or retention in place for the respective claim year. The aggregate maximum exposure for all current open Claims as of December 31, 2018 is estimated to not exceed approximately $1,700,000, which represents the potential costs that may be incurred over time for the Claims within the applicable insurance policy deductibles or retentions. From time to time, depending upon the nature of a particular case, the Company may decide to spend in excess of a deductible or retention to enable more discretion regarding the defense, although this is not common. It is possible that the results of operations or liquidity of the Company, as well as the Company’s ability to procure reasonably priced insurance, could be adversely affected by the pending litigation, potentially materially. The Company is currently unable to estimate the ultimate liability, if any, that may result from the pending litigation, or potential litigation from future claims or claims that have not yet come to our attention, and accordingly, the liability in the consolidated financial statements primarily represents an accrual for legal costs for services previously rendered, and outstanding or anticipated settlements for Claims. The liabilities recorded on the Company’s books at December 31, 2018 and December 31, 2017 were $150,000 and $175,000, respectively, and are included in Other Liabilities.report.

Item 4 – MINE SAFETY DISCLOSURES

The Company does not have any disclosures applicable to mine safety.

PART II

Item 5 - MARKET FOR REGISTRANT’S COMMON EQUITY, AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Common Stock

Our common stock is listed on the NASDAQ Global Market, under the symbol OFLX. The number of shareholders of record as of December 31, 2018,2020, based on inquiries of the registrant’s transfer agent, was 354.332. For this purpose, shareholders whose shares are held by brokers on behalf of such shareholders (shares held in “street name”) are not separately counted or included in that total.

Shareholder Return Performance Presentation

The Shareholder Return Performance Presentation shall not be deemed to be “soliciting material” or subject to Regulations 14A or 14C of the Securities and Exchange Commission or to the liabilities of Section 18 of the Securities and Exchange Act of 1934 (the “Exchange Act”) and shall not be deemed incorporated by reference by any general statement incorporating by reference this annual report into any filing under the Securities Act of 1933 or under the Exchange Act, and shall not otherwise be deemed filed under such Acts.

The following graph shows the changes on a cumulative basis in the total shareholder return on the Omega Flex common stock, and compares those changes in shareholder return with the total return on the S&P 500 Index and the total return on the S&P 500 Building Products Index. The graph begins with a base value of $100 on December 31, 2013,2015, and shows the cumulative changes over the last five years, endingended on December 31, 2018.2020. The graph assumes $100 was invested on December 31, in each of the three alternatives, and that all dividends have been reinvested.

Dividends

Dividends

The Company currently has a policy of paying regular quarterly dividends, which is expected to continue. In addition, the Company may pay special dividends from time to time, as we did during December 2019 and January 2017. Further details regarding dividends are contained in Note 6, Shareholders’ Equity to the Consolidated Financial Statements included in this report.

The Board, in its sole discretion, has a general policy of reviewing the cash needs of the Company from time to time, and based on results of operations, financial condition and capital expenditure plans, possible acquisitions, as well as other factors that the Board may consider relevant, determining on a quarterly basis whether to declare a regular quarterly dividend, or a special dividend.

Item 6 - SELECTED FINANCIAL DATA

Selected financial data for the Company for each of the last five years is shown in the following table, which is derived from and should be read in conjunction with the Consolidated Financial Statements included elsewhere in this report.

SUMMARY OF FINANCIAL POSITION- as of December 31,

SUMMARY OF OPERATIONS - for the years ended December 31,

Item 7 - MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This report contains forward-looking statements, which are subject to inherent uncertainties. These uncertainties include, but are not limited to, variations in weather, changes in the regulatory environment, customer preferences, general economic conditions, increased competition, the outcome of outstanding litigation, and future developments affecting environmental matters. All of these are difficult to predict, and many are beyond the ability of the Company to control.

Certain statements in this Annual Report on Form 10-K that are not historical facts, but rather reflect the Company’s current expectations concerning future results and events, constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. The words “believes”, “expects”, “intends”, “plans”, “anticipates”, “hopes”, “likely”, “will”, and similar expressions identify such forward-looking statements. Such forward-looking statements involve known and unknown risks, uncertainties and other important factors that could cause the actual results, performance or achievements of the Company, or industry results, to differ materially from future results, performance or achievements expressed or implied by such forward-looking statements.

Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management’s view only as of the date of this Form 10-K. The Company undertakes no obligation to update the result of any revisions to these forward-looking statements which may be made to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, conditions or circumstances.

OVERVIEW

The Company is a leading manufacturer of flexible metal hose, and is currently engaged in a number of different markets, including construction, manufacturing, transportation, petrochemical, pharmaceutical and other industries.

The Company’s business is managed as a single operating segment that consists of the manufacture and sale of flexible metal hose and accessories. The Company’s products are concentrated in residential and commercial construction, and general industrial markets, with a comprehensive portfolio of intellectual property and patents issued in various countries around the world. The Company’s primary product, flexible gas piping, is used for gas piping within residential and commercial buildings. Through its flexibility and ease of use, the Company’s TracPipe^® and TracPipe^®CounterStrike^®flexible gas piping, along with its fittings distributed under the trademarks AutoSnap^® and AutoFlare^®, allows users to substantially cut the time required to install gas piping, as compared to traditional methods. The Company’s newest product line MediTrac^® corrugated medical tubing is used for piping medical gases (oxygen, nitrogen, nitrous oxide, carbon dioxide, and medical vacuum) in health care facilities. Building on the recognized strengths and strategies employed in the flexible gas piping market, MediTrac^® can be used in place of rigid copper pipe, and due to its long continuous lengths and flexibility, it can be installed approximately five times faster than rigid copper pipe, saving on installation labor and construction schedules. The Company’s products are manufactured at its Exton, Pennsylvania and Houston, Texas facilities in the United States,U.S., and in Banbury, Oxfordshire in the United Kingdom.UK. A majority of the Company’s sales across all industries are generated through independent outside sales organizations such as sales representatives, wholesalers and distributors, or a combination of both. The Company has a broad distribution network in North America and to a lesser extent in other global markets.

CHANGES IN FINANCIAL CONDITION

The Company’s cash balance of $32,392,000$23,633,000 at December 31, 2018, decreased $5,546,000 (14.6%2020 increased $7,535,000 (46.8%) from the $37,938,000a $16,098,000 balance at December 31, 2017.2019. The primary reasonsreason for the decrease were that the Company usedincrease in cash related to purchase short-term investments of $35,099,000, net of proceedsincome generated from sale of $20,155,000, for a balance of $14,944,000 as of the end of 2018, with the purpose of earning a higher level of investment income while maintaining a minimal level of risk, and the Company also paid dividendsoperations during 20182020. This was partially offset by dividend payments during 2020 totaling $9,284,000,$11,306,000, as detailed in Note 6, “Shareholders’ Equity”. Lastly,Shareholders’ Equity, to the Consolidated Financial Statements included in this report. Further, the Company used funds for various capital projects, including those designatedthe purchase of inventory in anticipation of stronger customer demand. See the Company’s Consolidated Cash Flow Statement for further details regarding the new MediTrac products. Those cash outflowschange in cash.

Accounts receivable were $20,077,000 and $17,047,000 as of December 31, 2020 and December 31, 2019, respectively, increasing $3,030,000 or 17.8%. The increase was largely related to the increase in sales over the last several months of 2020 in comparison to 2019, thus increasing the amounts to be collected within terms.

Retained earnings were $35,769,000 and $27,165,000 at December 31, 2020 and December 31, 2019, respectively, increasing $8,604,000 or 31.7%. The increase was primarily due to an increase in net income during the year, as provided on the Company’s Consolidated Statement of Operations, partially offset by income generated from operationsdividend payments made during 2018,2020, as well as the receipt of the $1,600,000 cash bond described below.

Other Long Term Assets were $1,307,000 and $3,079,000 at December 31, 2018 and December 31, 2017, respectively, decreasing $1,772,000 (57.6%). During May 2018, the Company received back the cash bond of approximately $1,600,000, which was previously held as security during an appeals process as detaileddiscussed in detail in Note 10, Commitments and Contingencies.6, Shareholders’ Equity, to the Consolidated Financial Statements included in this report.

RESULTS OF OPERATIONS

Twelve-months ended December 31, 20182020 vs. twelve months ended December 31, 20172019

The Company reported comparative results from operations for the twelve-month periodperiods ended December 31, 20182020 and 20172019 as follows:

Net Sales. The Company’s sales for the full year of 20182020 were $108,313,000,$105,796,000, reflecting an increasea decrease of $6,514,000,$5,564,000, or 6.4%5.0%, over $101,799,000compared to $111,360,000 in 2017.2019. The increasedecrease in sales resulted mostly from an increasea decrease in unit volume, combined with higher saleswhich was in some measure impacted by the COVID-19 pandemic, partially offset by a mild increase to selling prices that werewas necessary to help offset a rise in the Company’s material commodity costs.

Gross Profit. The Company’s gross profit margins increased slightly between the two periods, at 61.0%were 62.9% and 60.7%63.3% for the twelve-months ended December 31, 20182020 and 2017,2019, respectively. The Company was able to maintain margins similar to prior year levels despite COVID-19 disruptions, such as increased costs to sanitize the factory and equipment, inefficiencies from staggered work shifts and overtime costs due to employees being quarantined, as well as unabsorbed overhead.

Selling Expenses. Selling expenses consist primarily of employee salaries and associated overhead costs, commissions, and the cost of marketing programs such as advertising, trade shows and related communication costs, and freight. Selling expense was $17,117,000$16,580,000 and $16,359,000$19,032,000 for 20182020 and 2017,2019, respectively, representing a year over year increasedecrease of $758,000,$2,452,000, or 4.6%12.9%. The increase was primarilymost significant reduction relates to atypical consulting costs identified during 2019, attributable to an increasethe Company’s new product, MediTrac^® flexible medical gas piping. The Company also experienced decreases in freighttravel and commissions, which changeadvertising during 2020, mostly related to restrictions stemming from the pandemic. Commissions were also down due to the decrease in conjunction withsales. Conversely, the Company expanded its sales unit volume.related staffing resources. For the same periods, selling expense as a percentage of net sales was 15.8%15.7% and 16.1%17.1%, respectively.

General and Administrative Expenses. General and administrative expenses consist primarily of employee salaries, benefits for administrative, executive and finance personnel, legal and accounting, insurance, and corporate general and administrative services. General and administrative expenses were $17,800,000$19,117,000 and $17,897,000$24,818,000 for the years ended December 31, 20182020 and 2017,2019, respectively, decreasing $97,000,$5,701,000, or 0.5%23% between periods. Legal and product liability defense costs decreased $5,158,000, associated primarily with one class action case which was dismissed during 2020, as explained in detail in Note 10, Commitments and Contingencies, of the Consolidated Financial Statements to this report. Professional fees and director related fees were also lower. Those items were softened by an increase to incentive compensation, which although not significant in total, was derived from two notable yet mostly offsetting components. There was an increase in the incentive compensation component which is aligned with profitability; however, there was a reduction in expense pertaining to equity awards which move in relation to the Company’s stock price, as detailed in Note 11, Stock Based Compensation Plans. As a percentage of net sales, general and administrative expenses were 16.4%18.1% and 17.6%22.3% for the twelve-months ended December 31, 20182020 and 2017,2019, respectively.

Engineering Expenses. Engineering expenses consist of development expenses associated with the development of new products, and costs related to enhancements of existing products and manufacturing processes. Engineering expenses increased $1,520,000decreased $515,000 or 46.2%10.9% between periods, being $4,813,000$4,200,000 and $3,293,000$4,715,000 for the years ended December 31, 20182020 and 2017,2019, respectively. The Company had ramped up spend ondecrease was primarily attributable to a reduction in experimental materials that diminished after the work was completed on various promising applications during 2018,2019, and to a majority of which related to the new MediTrac products. The Company also had additional staffing and consulting related charges.lesser extent travel. As a percentage of net sales for the year, engineering expenses were 4.4%4.0% in 20182020 and 3.2%4.2% in 2017.2019.

Operating Profit. Reflecting all of the factors mentioned above, operating profits increased $2,149,000,$4,731,000, or 8.9%21.6%, between periods, ending withreflecting a profit of $26,366,000$26,653,000 in 2018,2020, as compared to $24,217,000$21,922,000 in 2017.2019.

Interest Income. Interest income is recorded on cash investments, and interest expense is recorded at times when the Company has debt amounts outstanding on its line of credit. Interest ratesThe Company recorded interest expense of $39,000 for 2020, compared to interest income of $876,000 for 2019. The reduction in general have improvedinterest income was largely due to the lower cash balance and thus reduced investment, mostly resulting from the $35,330,000 special dividend paid in the market, andDecember 2019. Additionally, the Company had borrowed $15,000,000 on its line of credit for a portion of the second quarter of 2020 to ensure liquidity during the COVID-19 crisis. Earning potential on short-term liquid investments has therefore been ablealso diminished in comparison to purchase short-term investments during 2018 which resulted in an increase of interest income in excess of those generated fromthis time last year. There was $488,000 of interest income recorded during 2018 and $117,000 in 2017.

Other Income (Expense). Other income (expense) primarily consists of foreign currency exchange gains (losses) on transactions within our foreign subsidiaries, and therefore tends to fluctuate with the strengthening and or weakening of the British Pound. The Company recognized other expense of $126,000$53,000 during 2020 and $38,000other income of $56,000 during 2018 and 2017, respectively.2019.

Income Tax Expense. Income tax expense was $6,451,000 during 2018,$6,594,000 for 2020, compared to $8,450,000$5,429,000 for 2019. The $1,165,000 or 21.5% increase in 2017, decreasing by $1,999,000, or 23.7%. The Company recognized a one-time tax charge of $709,000 duringexpense was largely the fourth quarter of 2017 primarily related to unremitted foreign earnings resulting from the change in the tax code during the end of 2017, described as the “Act”, which is outlined in Note 7, “Income Taxes”. There was also a lower tax rate in effect during 2018 attributable to the Act, which reduced the U.S. corporate tax rate from 35% to 21%, effective for the Company’s 2018 tax year. The Company’s tax provision also reflects other changes as a result of the Act, including the impact of GILTI provisions, and changes affecting the deductibility of certain executive compensation. The decrease in taxes attributable to the Act, was partially offset by higher taxes associated with an increase in income before taxes. The effective tax rate for both periods was similar at approximately 24% to 25% of income before taxes.

Twelve-months ended December 31, 20172019 vs. twelve months ended December 31, 20162018

The Company reported comparative results from operations for the twelve-month periodperiods ended December 31, 20172019 and 20162018 as follows:

Net Sales. The Company’s sales for the full year of 20172019 were $101,799,000,$111,360,000, reflecting an increase of $7,748,000,$3,047,000, or 8.2%2.8%, over $94,051,000$108,313,000 in 2016.2018. The majority of the increase was related toin sales resulted mostly from an increase in unit volume, combined with higher salesselling prices that were necessary to help offset a rise in the Company’s material costs.

Gross Profit. The Company’s gross profit margins decreased slightlyincreased between the two periods, at 60.7%63.3% and 61.5%61.0% for the twelve-months ended December 31, 20172019 and 2016,2018, respectively.

Selling Expenses. Selling expenses consist primarily of employee salaries and associated overhead costs, commissions, and the cost of marketing programs such as advertising, trade shows and related communication costs, and freight. Selling expense was $16,359,000$19,032,000 and $15,694,000$17,117,000 for 20172019 and 2016,2018, respectively, representing a year over year increase of $665,000,$1,915,000, or 4.2%11.2%. The increase was primarilyA majority of the additional expense relates to atypical consulting costs attributable to the Company’s new product, MediTrac^® flexible medical gas piping, increasing $977,000 over last year. The Company has also expanded its sales related staffing resources, and recognized an increase in freight and commissions which changeduring the year, largely driven by the increase in conjunctionsales. Travel expenses, partially associated with sales unit volume.the increase in staffing, were also higher. For the same periods, selling expense as a percentage of net sales was 16.1%17.1% and 16.7%15.8%, respectively.

General and Administrative Expenses. General and administrative expenses consist primarily of employee salaries, benefits for administrative, executive and finance personnel, legal and accounting, insurance, and corporate general and administrative services. General and administrative expenses were $17,897,000$24,818,000 and $17,108,000$17,800,000 for the years ended December 31, 20172019 and 2016,2018, respectively, increasing $789,000,$7,018,000, or 4.6%39.4% between periods. This included anLegal and product liability defense costs increased $4,659,000, associated primarily with one class action case which was dismissed during 2020, as explained in detail in Note 10, Commitments and Contingencies, of the Consolidated Financial Statements to this report. There was also a $1,390,000 increase in incentive compensation partially due to thecompensation. The increase in profits, and also related to the Company’s phantom stock plan, mainly resulting fromwas primarily created by an increase in the value of prior equity awards driven by the surge in the Company’s stock price. There was also an increase in insurance costs. Theprice during 2019; however, the impact of these costs were however temperedthe equity awards was partially offset by a decrease in legal and product liability related defense costs.the incentive compensation component which is aligned with profitability. Other professional fees also expanded by $780,000. As a percentage of net sales, general and administrative expenses were 17.6%22.3% and 18.2%16.4% for the twelve-months ended December 31, 20172019 and 2016,2018, respectively.

Engineering Expenses. Engineering expenses consist of development expenses associated with the development of new products, and costs related to enhancements of existing products and manufacturing processes. Engineering expenses increased $108,000,decreased $98,000 or 3.4%,2.0% between periods, at $3,293,000being $4,715,000 and $3,185,000$4,813,000 for the years ended December 31, 20172019 and 2016,2018, respectively. The change was primarilyCompany had ramped up spending on experimental materials during 2018, a majority of which related to an increasethe new MediTrac^® products, as well as increases in staffing.certification and qualification costs. During 2019, the Company had additional staffing and consulting related charges. As a percentage of net sales for the year, engineering expenses were 3.2%4.2% in 20172019 and 3.4%4.4% in 2016.2018.

Operating Profit. Reflecting all of the factors mentioned above, operating profits increased $2,320,000,decreased $4,444,000, or 10.6%16.9%, between periods, ending withreflecting a profit of $24,217,000$21,922,000 in 2017,2019, as compared to $21,897,000$26,366,000 in 2016.2018.

Interest Income. Interest income is recorded on cash investments, and interest expense is recorded at times when the Company has debt amounts outstanding on its line of credit. There was $117,000$876,000 of interest income recorded during 20172019 and $98,000$488,000 in 2016.2018.

Other Expense.Income (Expense). Other income (expense) primarily consists of foreign currency exchange gains (losses) on transactions within our foreign subsidiaries, and therefore tends to fluctuate with Omega Flex Limited, our United Kingdom (“UK”) subsidiary. During 2016,the strengthening and or weakening of the British Pound weakened,Pound. The Company recognized other income of $56,000 during 2019 and other expense of $126,000 during 2018.

Income Tax Expense. Income tax expense was $5,429,000 for 2019, compared to $6,451,000 for 2018. The $1,022,000 or 15.8% decrease in tax expense was largely the result of the decrease in income before taxes. A lower rate was in effect during both 2019 and 2018 attributable to the Tax Cuts and Jobs Act enacted at the end of 2017. The Act reduced the U.S. federal tax rate from 35% to 21%, effective for the Company’s 2018 tax year. The Company’s tax provision also reflects other changes as a result of the UK’s vote to exitAct, including the European Union. As a result, the Company recognized currency related losses of $474,000 for 2016. The British Pound stabilized during 2017, and therefore the Company only recognized a loss of $38,000 during the year.

Income Tax Expense. Income tax expense was $8,450,000 for the full year 2017, compared to $6,975,000 for the same period in 2016, increasing by $1,475,000 (21.1%). As outlined in Note 7, “Income Taxes”, the Company recognized a one-time tax charge of $709,000 during the fourth quarter of 2017 primarily related to unremitted foreign earnings resulting from the recent change in the tax code. The remainderimpact of the increase was largely in correlation withGlobal Intangible Low Taxed Income provisions, and changes effecting the change in income before taxes. Excluding the previously described one-time tax charge, the Company’s effective tax rate in 2017 approximates the 2016 rate and does not differ materially from expected statutory rates.deductibility of certain executive compensation.

COMMITMENTS AND CONTINGENCIES

See Note 10, to the Company’s financial statementsConsolidated Financial Statements included in this report for a detailed description of Commitmentscommitments and Contingencies.contingencies.

FUTURE IMPACT OF KNOWN TRENDS OR UNCERTAINTIES

The Company’s operations are sensitive to a number of market and extrinsic factors, any one of which could materially adversely affect the Company’s business, competitive position, results of operations or financial condition in any given year. See Item 1A, Risk Factors, for a detailed description.

CRITICAL ACCOUNTING POLICIES AND USE OF ESTIMATES

Note 2, of the NotesSignificant Accounting Policies, to the Consolidated Financial Statements included in this report, includes a summary of the significant accounting policies and methods used in the preparation of our Consolidated Financial Statements.

The preparation of financial statements in conformity with generally accepted accounting principles (GAAP) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the dates of the financial statements and the reported amounts of revenues and expenses during the reporting periods. The most significant estimates and assumptions relate to revenue recognition and related sales incentives, accounts receivable allowances, investment valuations, inventory valuations, goodwill valuation, product liability costs,reserve, phantom stock and accounting for income taxes. Actual amounts could differ significantly from these estimates.

Our critical accounting policies and significant estimates and assumptions are described in more detail as follows:

Revenue Recognition

Effective January 1, 2018,With regard to revenue recognition, the Company adoptedapplies the requirements of Accounting Standards Update 2014-09,Revenue from Contracts with Customers (Topic 606). The standard is a comprehensive new revenue recognition model that requires revenue to be recognized in a manner to depict the transfer of goods or services to a customer at an amount that reflects the consideration expected to be received in exchange for those goods or services.

The guidance permits two methods of adoption: retrospectively to each prior reporting period presented (full retrospective method), or retrospectively with the cumulative effect of initially applying the guidance recognized at the date of initial application (the modified retrospective approach). The Company selected the modified retrospective approach however there was no material impact which required a cumulative effect adjustment.

The principle of Topic 606 was achieved through applying the following five-step approach:

It is important to note that the indicators are not a set of conditions that must be met before the Company can conclude that control of the goods has transferred to the customer. The indicators are a list of factors that are often present if a customer has control of the goods.

The Company has typical, unmodified FOB shipping point terms. As the seller, the Company can determine that the shipped goods meet the agreed-upon specifications in the contract or customer purchase order (e.g. items, quantities, and prices) with the buyer, so customer acceptance would be deemed a formality, as noted in ASC 606-10-55-86. As a result, the Company has a legal right to payment upon shipment of the goods.

Based upon the above, the Company has concluded that transfer of control substantively transfers to the customer upon shipment.

Other considerations of Topic 606 include the following:

If it was concluded that the above factors were in place for the Company, it would support the probability of a significant reversal of revenue. However, as none of the four factors apply to the Company, promotional incentives are recorded as a reduction of revenue based upon estimates of the eligible products expected to be sold.

Regarding disaggregated revenue disclosures, as previously noted, the Company’s business is controlled as a single operating segment that consists of the manufacture and sale of flexible metal hose. Most of the Company’s transactions are very similar in nature, contract, terms, timing, and transfer of control of goods. As indicated within Note 2, Significant Accounting Policies, to the Consolidated Financial Statements included in this report, under the caption “Significant Concentration”, the majority of the Company’s sales were geographically contained within North America, with the remainder scattered internationally. All performance assessments and resource allocations are generally based upon the review of the results of the Company as a whole.

Cash Equivalents

The Company considers all highly liquid investments with an original maturity of 90 days or less at the time of purchase to be cash equivalents. Cash equivalents include investments in an institutional money market fund, which invests in U.S. Treasury bills, notes and bonds, and/or repurchase agreements, backed by such obligations. Carrying value approximates fair value. Cash and cash equivalents are deposited at various area banks, which at times may exceed federally insured limits. The Company monitors the viability of the banking institutions carrying its assets on a regular basis, and has the ability to transfer cash to various institutions during times of risk. The Company has not experienced any losses related to these cash balances, and believes its credit risk to be minimal.

Accounts Receivable and Provision for Doubtful Accounts

Accounts receivableAll accounts receivables are reduced bystated at amortized cost, net of allowances for credit losses, and adjusted for any write-offs. The Company maintains allowances for credit losses, which represent an allowanceestimate of expected losses over the remaining contractual life of its receivables considering current market conditions and estimates for amounts that may become uncollectible in the future.supportable forecasts when appropriate. The estimated allowance for uncollectible amountsestimate is based primarily on specific analysis of accounts in the receivable portfolio and historical write-off experience. While management believes the allowance to be adequate, if the financial conditiona result of the Company’s customers wereongoing assessments and evaluations of collectability, historical loss experience, and future expectations in estimating credit losses in its receivable portfolio. For accounts receivables, the Company uses historical loss experience rates and applies them to deteriorate, resulting in their inabilitya related aging analysis while also considering customer and/or economic risk where appropriate. Determination of the proper amount of allowances requires management to make payments, additionalexercise judgment about the timing, frequency and severity of credit losses that could materially affect the provision for credit losses and, as a result, net earnings. The allowances may be required.consider numerous quantitative and qualitative factors that include receivable type, historical loss experience, delinquency trends, collection experience, current economic conditions, estimates for supportable forecasts, when appropriate, and credit risk characteristics.

InvestmentsThe reserve for credit losses, which include future credits, discounts, and doubtful accounts, was $1,124,000 and $1,433,000 as of December 31, 2020 and 2019, respectively.

Investments

The Company invests excess funds in liquid interest earning instruments including U.S. Treasury bills and bank time deposits.deposits, with maturities typically of one year or less. These investments are stated at fair value, which approximates amortized cost, and are classified as available-for-sale in accordance with Accounting Standards CodificationASC Topic 320,Investments – Debt and Equity Securities(or “ASC 320”). Investments were $14,944,000 and $0The Company did not have any investments as of December 31, 20182020 and 2017, respectively. Maturities, from the date of purchase, were six months or less.2019.

Inventories

Inventories are valued at the lower of cost or net realizable value. The cost of inventories is determined by the first-in, first-out (FIFO) method. The Company generally considers inventory quantities beyond two years of non-usage, measured on a historical usage basis, to be excess inventory and reduces the gross carrying value of inventory accordingly.

Goodwill

In accordance with Financial Accounting Standards Board (FASB)(“FASB”) ASC Topic 350, Intangibles – Goodwill and Other (ASU 2017-04), using the simplified method as adopted, the Company performed an annual impairment test in accordance with this guidance as of December 31, 2018 and also at December 31, 2017. These analyses2020. This analysis did not indicate any impairment of goodwill.

However, the duration and severity of the COVID-19 pandemic could result in future goodwill atimpairment charges. While we have concluded that a triggering event did not occur during 2020, a prolonged pandemic could impact the endCompany’s results of either period.operations in a manner significant enough to trigger an impairment test.

Stock-Based Compensation Plans

In 2006, the Company adopted a Phantom Stock Plan (the “Plan”), which allows the Company to grant phantom stock units (Units) to certain key employees, officers or directors. The Units each represent a contractual right to payment of compensation in the future based upon the market value of the Company’s common stock. The Units follow a vesting schedule of three years from the grant date, and are then paid upon maturity. In accordance with FASB ASC Topic 718, Stock Compensation, the Company uses the Black-Scholes option pricing model as its method for determining the fair value of the Units. Further details of the Plan are provided in Note 11, Stock-Based Compensation Plans, to the Company’s financial statements.Consolidated Financial Statements included in this report.

Product Liability Reserves

Product liability reserves represent the estimated unpaid amounts under the Company’s insurance policies with respect to existing claims. The Company uses the most current available data to estimate claims. As explained more fully under Note 10, Commitments and Contingencies, to the Consolidated Financial Statements included in this report for various product liability claims covered under the Company’s general liability insurance policies, the Company must pay certain defense and settlement costs within its deductible or self-insured retention limits, ranging primarily from $25,000 to $1,000,000$2,000,000 per claim, depending on the terms of the policy in the applicable policy year, up to an aggregate amount. The Company is vigorously defending against all known claims.

Leases

Effective January 1, 2019, the Company adopted the requirements of FASB ASU 2016-02, Leases (Topic 842) which defines a lease as any contract that conveys the right to use a specific asset for a period of time in exchange for consideration. Leases are classified as a finance lease, formerly called a capital lease, if any of the following criteria are met:

For any leases that do not meet the criteria identified above for finance leases, the Company treats such leases as operating leases. As of December 31, 2020, each of the Company’s leases are classified as operating leases.

Both finance and operating leases are reflected on the balance sheet as lease or “right-of-use” assets and lease liabilities.

There are some exceptions, which the Company has elected in its accounting policies. For leases with terms of twelve months or less, or below the Company’s general capitalization policy threshold, the Company has elected an accounting policy to not recognize lease assets and lease liabilities for all asset classes. The Company recognizes lease expense for such leases generally on a straight-line basis over the lease term.

The Company determines if a contract is a lease at the inception of the arrangement. The Company reviews all options to extend, terminate, or purchase its right-of-use assets at the inception of the lease and accounts for these options when they are reasonably certain to be exercised. Certain leases contain non-lease components, such as common area maintenance, which are generally accounted for separately. In general, the Company will assess if non-lease components are fixed and determinable, or variable, when determining if the component should be included in the lease liability. For purposes of calculating the present value of the lease obligations, the Company utilizes the implicit interest rate within the lease agreement when known and/or determinable, and otherwise utilizes its incremental borrowing rate at the time of the lease agreement.

As permitted under ASU 2018-11, the Company elected the optional transition method to adopt the new leases standard. Under this new transition method, the Company initially applied the new leases standard at the adoption date of January 1, 2019 and would have recognized a cumulative-effect adjustment, if appropriate, to the opening balance of retained earnings in the period of adoption. No cumulative-effect adjustment was recognized.

The impact of the adoption of this new standard resulted in an increase to the Company’s operating lease assets and liabilities on January 1, 2019 of approximately $800,000. The implementation did not have a material impact on our consolidated statements of income and statements of cash flows.

Fair Value of Financial and Nonfinancial Instruments

The Company measures financial instruments in accordance with FASB ASC Topic 820, Fair Value Measurements and Disclosures.Disclosures. The accounting standard defines fair value, establishes a framework for measuring fair value under GAAP, and enhances disclosures about fair value measurements. Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Valuation techniques used to measure fair value must maximize the use of observable inputs and minimize the use of unobservable inputs. The standard creates a fair value hierarchy which prioritizes the inputs to valuation techniques used to measure fair value into three broad levels as follows: Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities; Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly; and Level 3 inputs are unobservable inputs that reflect the Company’s own assumptions about the assumptions market participants would use in pricing the asset or liability. The Company relies upon Level 1 inputs in determining the fair value of investments and the fair value of the Company’s reporting unit in its annual impairment test as described in the FASB ASC Topic 350, Intangibles - Goodwill and Other.Other.

Earnings per Common Share

Basic earnings per share have been computed using the weighted-average number of common shares outstanding. For the periods presented, there are no dilutive securities. Consequently, basic and dilutive earnings per share are the same.

Currency Translation

Assets and liabilities denominated in foreign currencies, most of which relate to the Company’s U.K. subsidiary whose functional currency is the British Pound, are translated into U.S. dollars at exchange rates prevailing on the balance sheet dates. The Statements of Operations are translated into U.S. dollars at average exchange rates for the period. Adjustments resulting from the translation of financial statements are excluded from the determination of income and are accumulated in a separate component of shareholders’ equity. Exchange gains and losses resulting from foreign currency transactions are included in the Statementsstatements of Operationsincome (other income (expense))expense) in the period in which they occur.

Income Taxes

The Company accounts for tax liabilities in accordance with the FASB ASC Topic 740, Income Taxes.Taxes. Under this method the Company recorded tax expense, related deferred taxes and tax benefits, and uncertainties in tax positions.

Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities from a change in tax rates is recognized in income in the period that includes the enactment date. A valuation allowance is provided for deferred tax assets if it is more likely than not that these items will either expire before the Company is able to realize the benefit, or that future deductibility is uncertain.

The FASB ASC Topic 740, Income Taxes, clarifies the criteria that an individual tax position must satisfy for some or all of the benefits of that position to be recognized in a company’s financial statements. This guidance prescribes a recognition threshold of more-likely than-not, and a measurement attribute for all tax positions taken or expected to be taken on a tax return, in order for those tax positions to be recognized in the financial statements.

The Company follows the provisions of ASC 740-10 relative to accounting for uncertainties in tax positions. These provisions provide guidance on the recognition, de-recognition and measurement of potential tax benefits associated with tax positions.

The Company reflected the effects of the Tax Cuts and Jobs Act (the “Act”), in its 2017 financial statements. This included the effects of the change in the US corporate tax rate from 35% to 21% on deferred tax assets and liabilities, and a provision related to previously deferred taxes on earnings of the Company’s foreign subsidiary. The Company’s tax expense for the period ended December 31, 2018 includes the continuing effect of the reduction in the US corporate tax rate from 35% to 21%, effective for the Company’s 2018 tax year. The Company’s tax provision also reflects other changes as a result of the Act, including the impact of the Global Intangible Low Taxed Income (“GILTI”) provisions, and changes affecting the deductibility of certain executive compensation.

LIQUIDITY AND CAPITAL RESOURCES

Historically, the Company’s primary cash needs have been related to working capital items, which the Company has largely funded through cash generated from operations.

With regards to liquidity and capital resources,As of December 31, 2020, the Company had a cash balance of $32,392,000 and short-term investments of $14,944,000 at December 31, 2018, and also$23,633,000. Additionally, the Company has the full use of a $15,000,000 line of credit available, with Santander Bank, as discussed in detail in Note 5, to the Company’s financial statements.which had no borrowings outstanding against it as of December 31, 2020. At December 31, 2017,2019, the Company had a cash balance of $37,938,000 and did not hold any short-term investments.$16,098,000, with no borrowings against the line of credit.

Operating Activities

Cash provided by operating activities is net income adjusted for certain non-cash items and changes in certain assets and liabilities, such as those included in working capital.

For 2018,2020, the Company’s cash provided from operating activities was $21,058,000,$19,310,000, compared to $18,048,000$16,041,000 of cash provided during 2017, thus increasing by $3,010,000 between periods. For 2017, the Company’s cash provided from operating activities was $18,048,000, compared to $14,758,0002019, and $21,058,000 of cash provided during 2016, thus increasing by $3,290,000 between periods.2018. This illustrates an increase of $3,269,000 during 2020, versus a decrease during 2019 of $5,017,000. For details of the operating cash flows refer to the consolidated statements of cash flows in Item 8. Financial Statements and Supplementary Data on page 39.40.

As a general trend, the Company tends to deplete cash early in the year, as significant payments are typically made for accrued promotional incentives, incentive compensation, and taxes. Cash has then historically shown a tendency to be restored and accumulated during the latter portion of the year. However, as described previously, during December 2019, the Company liquidated its investments to support the payment of a special dividend to shareholders totaling $35,330,000, as outlined in Note 6, Shareholders’ Equity, to the Consolidated Financial Statements included in this report.

Investing Activities

Cash used in investing activities during 2018 and 20172020 was $16,868,000 and $3,093,000, respectively. $564,000, all related to various capital expenditure projects.

Cash provided by investing activities during 2019 was $13,719,000, with most of the transactions related to the purchase and/or sale of short-term investments. During December 2019, the Company liquidated its all of its existing short-term investments to support the payment of a special dividend to shareholders. In total, cash proceeds from the sale of short-term investments during 2019 was $70,882,000. Inversely, cash used for the purchase of the short-term investments during 2019 was $55,938,000. Cash was also used to purchase capital expenditures of $1,225,000, mostly related to the new MediTrac^® products.

During 2018, the Company used $16,868,000 of cash for investing activities. A majority of the cash was used tofor the purchase of short-term investments. During 2018, the Company purchased $35,099,000 of short-term investments, and inversely received $20,155,000 of $35,099,000 and for capital expenditures of $1,924,000, which was partially offset by cash received from net proceeds from the sale of short-term investmentsinvestments. The Company also used $1,924,000 of $20,155,000. Capitalcash for capital expenditures during 2018, mainly related to capital projects designated for the new MediTrac^® products. During 2017, cash was used solely for capital expenditures mainly related to the purchase of a 30,000 square foot facility in Exton, Pennsylvania, which required a cash outlay of approximately $2,500,000. This facility was previously under lease through January 2018. During 2016, cash used in investing activities of $233,000 was solely used for capital expenditures which mainly related to information technology and machinery.

Financing Activities

Omega Flex, Inc. declared regular quarterly dividendsAll financing activities relate to dividend payments, which are detailed in the aggregate amount of $2,220,000 in April,Note 6, Shareholders’ Equity. Dividend payments for 2020, 2019, and $2,422,000 each in June, September and December 2018 which were subsequently paid in April 2018, July 2018, October 2018, and January 2019, respectively. Additionally, there was a dividend that was paid in April 2018 by the Company’s foreign subsidiary, which amounted to an outlay$11,306,000, $46,028,000 and $9,775,000, respectively. 2019 included the payment of cash of $491,000 to the foreign subsidiary’s noncontrolling interest. Also, the Company declared regular quarterly dividends during June, September and December 2017 in the aggregate amount of $2,220,000 each, which were subsequently paid in July 2017, October 2017, and January 2018, respectively.

Finally, the Company declared a special dividend, which is primarily why the cash outflow in December 2016 in the aggregate amount of $8,578,000, which was subsequently paid in January 2017. The variance between the 2018 and 2017 years was therefore $3,243,000.that year is higher. Each of these dividends are outlined in Note 6, ofShareholders’ Equity, to the Consolidated Financial Statements.Statements included in this report. Also, see Note 5, Line of Credit and Other Borrowings, for a description of borrowings and repayments during the second quarter of 2020. The Company had no borrowings or payments on its line of credit during 20182019 or 2017.2018.

Liquidity

We believe our existing cash and cash equivalents, along with our borrowing capacity, will be sufficient to meet our anticipated cash needs for at least the next twelve months. Our future capital requirements will depend upon many factors including our rate of revenue growth, the timing and extent of any expansion efforts, and the potential for investments in, or the acquisition of any complementary products, businesses or supplementary facilities for additional capacity.capacity, and the COVID-19 pandemic.

RECENT ACCOUNTING PRONOUNCEMENTS

In May 2014,March 2020, the FASB issued ASU 2014-09,No. 2020-04, Revenue from Contracts with CustomersReference Rate Reform (Topic 606)848): Facilitation of the Effects of Reference Rate Reform on Financial Reporting, requiring. The ASU applies to all entities that have contracts, hedging relationships, and other transactions that reference LIBOR or another reference rate expected to be discontinued because of reference rate reform. The ASU provides optional expedients and exceptions for applying GAAP to contracts, hedging relationships, and other transactions affected by reference rate reform if certain criteria are met. The expedients and exceptions provided by the ASU do not apply to contract modifications made and hedging relationships entered into or evaluated after December 31, 2022, except for hedging relationships existing as of December 31, 2022, that an entity to recognizehas elected certain optional expedients for and that are retained through the amountend of revenue to which it expects to be entitled for the transfer of promised goods or services to customers.hedging relationship. The updated standard replaced most existing revenue recognition guidance in US GAAP once it became effective and permitted the use of either a full retrospective or retrospective with cumulative effect transition method. The updated standard becameASU is effective for the Company in the first quarterall entities as of fiscal year 2018.March 12, 2020 through December 31, 2022. The Company completed its review of its customer contracts and its analysis of the impact of the disclosure requirements of ASU 2014-09 during 2017. The Company has adopted the revenue guidance effective January 1, 2018, using the modified retrospective approach. The adoption of ASU 2014-092020-04 did not have a material impact on the Company’s financial statements, and is not expected to have any material impact on an ongoing basis. Although there is no material impact on the financial statements our accounting policy for revenue recognition has been updated as described previously in Note 1 of the consolidated financial statements.Consolidated Financial Statements.

In February 2016,December 2019, the FASB issued ASU 2016-02,2019-12, LeasesIncome Taxes (Topic 842)740): Simplifying the Accounting for Income Taxes.. Under this The guidance removes certain exceptions for recognizing deferred taxes for equity method investments, performing intraperiod allocation, and calculating income taxes in interim periods. The ASU lesseesalso adds guidance to reduce complexity in certain areas, including recognizing deferred taxes for goodwill and allocating taxes to members of a consolidated group, among others. The amendments in ASU 2019-12 are required to recognize right-of-use assets and lease liabilities for all leases not considered short-term leases. By definition, a short-term lease is one in which: (a) the lease term is 12 months or less and (b) there is not an option to purchase the underlying asset that the lessee is reasonably certain to exercise. This change will result in lessees recognizing right-of-use assets and lease liabilities for most leases currently accounted for as operating leases under the legacy lease accounting guidance. ASU 2016-02 is effective for interim and annual periodspublic business entities for fiscal years beginning after December 15, 2018.2020, including interim periods therein. Early adoption of the standard is permitted.permitted, including adoption in interim or annual periods for which financial statements have not yet been issued. The Company will adoptis currently evaluating the lease standard effective January 1, 2019 using the allowable option to apply the transition provisionsimpact of theadopting this new guidance aton its adoption date instead of at the earliest comparative period presented in our financial statements. This will require us to disclose lease information relating to earlier periods using the currently existing guidance.

The new standard provides a number of optional practical expedients throughout the transition. The Company elected the “package of practical expedients,” which permits the Company to not reassess under the new standard the Company’s prior conclusions about lease identification, lease classification,Consolidated Financial Statements and initial direct costs. The new standard also provides practical expedients for an entity’s ongoing accounting. The Company elected the short-term lease recognition exemption for all leases that qualify as pursuant to the above definition. This means, for those leases that qualify, the Company will not recognize right-of-use assets or lease liabilities, and this includes not recognizing right-of-use assets or lease liabilities for existing short-term leases of those assets in transition.

The impact of adoption is expected to be an increase to the Company’s operating lease assets and liabilities on January 1, 2019 of approximately $800,000. The guidance will not have a material impact on our consolidated statements of operations and statements of cash flows.

In January 2017, the FASB amended ASC Topic 350,Intangibles – Goodwill and Other(issued under ASU 2017-04, “Simplifying the Test for Goodwill Impairment”). This amendment simplifies the test for goodwill impairment by only requiring an entity to perform an annual or interim goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount and recognize an impairment charge for the amount that the carrying amount exceeds the reporting unit’s fair value. Any loss recognized should not exceed the total amount of goodwill allocated to that reporting unit. The amendment requires adoption on January 1, 2020. The Company does not expect that the adoption of ASU 2017-04 will have a material impact on its consolidated financial statements.to be significant.

Off-Balance Sheet Obligations or Arrangements

None.

TABULAR DISCLOSURE OF CONTRACTUAL OBLIGATIONS AND OFF-BALANCE SHEET ARRANGEMENTS

Contractual Obligation and Commercial Commitments

The Company’s primary contractual obligations as of December 31, 20182020 are summarized in the following table and are more fully explained in Notes to the Consolidated Financial Statements.

The Company is obligated to make payments related to a deferred compensation plan, as detailed in Note 10, Commitments and Contingencies, to the Company’s financial statements. The timing of all of these payments are currently not known as it is contingent upon the retirement of the applicable employee(s), and therefore are not included in the above table. The total net present value of the amount of deferred compensation which is not expressed in the above table is $390,000 at December 31, 2018, which would be paid over a period of 15 years. Additionally, asAs explained in Note 11, Stock Based Compensation Plans, to the Consolidated Financial Statements included in this report, the Company is obligated to make payments to plan participants. Due to the uncertain nature of the payments, due to numerous variables, including the potential change in stock price, and employment status of participants and any applicable forfeitures, the amounts are not disclosed in the above table. The liability associated with this Planplan as of December 31, 20182020 was $1,692,000,$3,331,000, of which $599,000$1,378,000 is anticipated to be paid within the next year, and the remainder thereafter.

Item 7A - QUANTITATATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISKS

The Company does not engage in the purchase or trading of market risk sensitive instruments. The Company does not presently have any positions with respect to hedge transactions such as forward contracts relating to currency fluctuations. No market risk sensitive instruments are held for speculative or trading purposes.

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Omega Flex, Inc.

Index to Consolidated Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and the Board of Directors of Omega Flex, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Omega Flex, Inc. and its subsidiaries (the Company) as of December 31, 20182020 and 2017,2019, the related consolidated statements of operations, comprehensive income, shareholders’ equity and cash flows for each of the three years in the period ended December 31, 2018,2020, and the related notes to the consolidated financial statements (collectively, the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 20182020 and 2017,2019, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2018,2020, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2018,2020, based on criteria established inInternal Control — Integrated Frameworkissued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013, and our report dated March 11, 20198, 2021 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Product liability claims

As described in Notes 2 and 10 of the financial statements, the Company is subject to periodic lawsuits, investigations and claims, primarily relating to potential lightning damage to its flexible gas piping products (the “Claims”). The Company accrues an estimated product liability reserve related to the resolution cost of the Claims for which management believes a loss is probable of occurring, and the amount of the loss is reasonably estimable, and discloses the aggregate maximum exposure for all open Claims. As of December 31, 2020, the Company accrued a product liability reserve of $642,000, and disclosed that the aggregate maximum exposure for all current open claims is estimated not to exceed $6,227,000. Due to the uncertainty of potential costs to be incurred related to the Claims, and the uncertainty of the ultimate outcome of each Claim, management applies significant judgements and estimates in determining the probability that a loss has been incurred and the amount to accrue for such loss.

We identified the accrual and disclosure of the Claims as a critical audit matter due to the significant judgments made by management when assessing the probability of a loss as well as the ultimate resolution costs of the Claims. Auditing management’s estimates and assumptions required a high degree of auditor judgment and increased audit effort due to the impact these assumptions have on the accrued product liability reserves and disclosures.

Our audit procedures related to the Claims included the following, among others:

/s/ RSM US LLP

We have served as the Company’s auditor since 2010.

Blue Bell, Pennsylvania

March 11, 20198, 2021

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and the Board of Directors of Omega Flex, Inc.

Opinion on the Internal Control Over Financial Reporting

We have audited Omega Flex, Inc.’s (the Company) internal control over financial reporting as of December 31, 2018,2020, based on criteria established inInternal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013. In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2018,2020, based on criteria established inInternal Control — Integrated Frameworkissued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the 20182020 consolidated financial statements of the Company and our report dated March 11, 20198, 2021 expressed an unqualified opinion.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ RSM US LLP

Blue Bell, Pennsylvania

March 11, 20198, 2021

OMEGA FLEX, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

December 31,

(Dollars in Thousands, except Common Stock par value)

See accompanying Notes which are an integral part of the Consolidated Financial Statements.

OMEGA FLEX, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

For the years ended December 31,

(Amounts in thousands, except earnings per common shares)