================================================================================- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
----------------
FORM 10-Q
----------------
(Mark One)
[X] QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934.
For the quarterly period ended OctoberApril 29, 20002001
OR
[_] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934.
For the transition period from ____________ to ____________ .
Commission file number: 0-23985
----------------
NVIDIA CORPORATION
(Exact Name of Registrant as Specified in Its Charter)
Delaware 94-3177549
(State or Other Jurisdiction of (I.R.S. Employer
Incorporation or Organization) Identification No.)
3535 Monroe Street
2701 San Tomas Expressway
Santa Clara, California 9505195050
(408) 615-2500486-2000
(Address, including Zip Code, of Registrant's Principal Executive Offices
and Registrant's Telephone Number, including Area Code)
----------------
Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports) and (2) has been subject to such
filing requirements for the past 90 days. Yes [X] No [ ][_]
The number of shares of the registrant's common stock outstanding as of December 1, 2000: 67,889,581
================================================================================May
24, 2001 was 70,161,353 shares.
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
NVIDIA CORPORATION
TABLE OF CONTENTS
Page
----
PART I: FINANCIAL INFORMATION
Page
----
ItemITEM 1. Condensed Consolidated Financial Statements
Condensed Consolidated Balance Sheets as of OctoberCONDENSED FINANCIAL STATEMENTS (UNAUDITED)
CONDENSED CONSOLIDATED BALANCE SHEETS AS OF APRIL 29, 2000 and January2001 AND
JANUARY 28, 2001............................................ 3
CONDENSED CONSOLIDATED STATEMENTS OF INCOME FOR THE THREE
MONTHS ENDED APRIL 29, 2001 AND APRIL 30, 2000....... 3
Condensed Consolidated Statements of Income for the three months and nine months ended
October2000.............. 4
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOW FOR THE THREE
MONTHS ENDED APRIL 29, 2000 and October 31, 1999................................................... 4
Condensed Consolidated Statements of Cash Flows for the nine months ended October 29,
2000 and October 31, 1999...............................................................2001 AND APRIL 30, 2000.............. 5
Notes to Condensed Consolidated Financial Statements....................................NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS.......... 6
ItemITEM 2. Management's Discussion and Analysis of Financial Condition and Results of Operations.....MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND
RESULTS OF OPERATIONS.......................................... 11
ItemITEM 3. Quantitative and Qualitative Disclosures About Market Risk................................QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK..... 16
PART II: OTHER INFORMATION
ItemITEM 1. Legal Proceedings......................................................................... 28
Item 6. Exhibits and Reports on Form 8-K.......................................................... 28
Signature...........................................................................................LEGAL PROCEEDINGS.............................................. 29
SIGNATURES.............................................................. 30
2
PART I:I. FINANCIAL INFORMATION
ItemITEM 1. Condensed Consolidated Financial StatementsCONDENSED FINANCIAL STATEMENTS (Unaudited)
NVIDIA CORPORATION AND SUBSIDIARIES
CONDENSED CONSOLIDATED BALANCE SHEETS
October 29, January 30,
2000 2000
----------- -----------
(In thousands)
(Unaudited)
April 29, January
2001 28, 2001
---------- ----------
ASSETS
Current assets:
Cash and cash equivalents................................................. $694,883equivalents............................ $ 61,560627,301 $ 674,275
Restricted cash...................................... 28,050 24,500
Accounts receivable, less allowances of $7,309$10,428 at
OctoberApril 29, 20002001 and $6,443$8,403 at January 30, 2000........................................... 104,352 67,224
Inventory................................................................. 93,192 37,63128, 2001....... 86,629 104,988
Inventory............................................ 86,770 89,905
Prepaid expenses and other current assets................................. 33,313 6,760
-------- --------assets............ 11,172 8,355
Prepaid and deferred taxes........................... 40,731 28,386
---------- ----------
Total current assets.................................................. 925,740 173,175assets............................... 880,653 930,409
Property and equipment, net................................................ 37,425 25,886net............................ 74,333 47,280
Deposits and other assets.................................................. 20,181 3,189
-------- --------
$983,346 $202,250
======== ========assets.............................. 10,513 10,909
Prepaid and deferred taxes............................. 30,053 4,034
Goodwill and intangible assets, net.................... 86,232 23,795
---------- ----------
$1,081,784 $1,016,427
========== ==========
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
Accounts payable..........................................................payable..................................... $ 86,71672,048 $ 64,91072,241
Accrued liabilities....................................................... 33,828 9,529liabilities.................................. 45,704 37,506
Current portion of capital lease obligations.............................. 685 1,786
-------- --------obligations......... 429 588
---------- ----------
Total current liabilities............................................. 121,229 76,225liabilities.......................... 118,181 110,335
Capital lease obligations, less current portion............................ 644 962portion........ 307 378
Deferred revenue...........................................................revenue....................................... 200,000 --200,000
Long-term debt.............................................................debt......................................... 300,000 500300,000
Stockholders' equity:
Common stock..............................................................stock.......................................... 70 68 62
Additional paid-in capital................................................ 263,857 95,933capital........................... 308,738 277,029
Deferred compensation..................................................... (15) (118)compensation................................ (2) (6)
Retained earnings......................................................... 97,563 28,686
-------- --------earnings.................................... 154,490 128,623
---------- ----------
Total stockholders' equity............................................ 361,473 124,563
-------- --------
$983,346 $202,250
======== ========equity......................... 463,296 405,714
---------- ----------
$1,081,784 $1,016,427
========== ==========
See accompanying notes to condensed consolidated financial statements.
3
NVIDIA CORPORATION AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF INCOME
(In thousands, except per share data)
(Unaudited)
Three Months
Ended
Nine Months Ended
--------------------------- ---------------------------
October-----------------
April April
29, October 31, October 29, October 31,2001 30, 2000
1999 2000 1999
----------- ----------- ----------- -----------
(In thousands, except per share amounts)
(Unaudited)-------- --------
Revenues..................................................... $198,165 $ 97,015 $517,046 $246,050Net revenues................................................. $240,932 $148,483
Cost of revenues............................................. 124,643 60,195 324,249 155,766
-------- --------149,295 92,975
-------- --------
Gross profit................................................. 73,522 36,820 192,797 90,284
-------- --------91,637 55,508
-------- --------
Operating expenses:
Research and development.................................... 22,023 12,420 59,994 32,018development................................... 31,206 17,830
Sales, general and administrative........................... 14,852 9,293 41,569 24,693
-------- --------administrative.......................... 18,773 12,114
Amortization of goodwill and intangible assets............. 647 --
Acquisition related charges................................ 9,573 --
-------- --------
Total operating expenses................................ 36,875 21,713 101,563 56,711
-------- --------expenses................................. 60,199 29,944
-------- --------
Operating income............................................. 36,647 15,107 91,234 33,573income......................................... 31,438 25,564
Interest and other income, net............................... 4,630 430 10,056 1,141
-------- --------5,515 1,328
-------- --------
Income before income tax expense............................. 41,277 15,537 101,290 34,714expense.................................... 36,953 26,892
Income tax expense........................................... 13,209 4,973 32,413 11,203
-------- --------11,086 8,605
-------- --------
Net income...................................................income............................................... $ 28,06825,867 $ 10,564 $ 68,877 $ 23,511
======== ========18,287
======== ========
Basic net income per share................................... $ 0.430.37 $ 0.18 $ 1.07 $ 0.40
======== ========0.29
======== ========
Diluted net income per share................................. $ 0.350.31 $ 0.15 $ 0.87 $ 0.33
======== ========0.24
======== ========
Shares used in basic per share computation................... 66,003 60,030 64,660 59,09069,322 63,360
Shares used in diluted per share computation................. 80,435 71,863 79,234 71,22682,856 77,778
See accompanying notes to condensed consolidated financial statements.
4
NVIDIA CORPORATION CONDENSEDAND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
Nine Months Ended
------------------------------
October 29, October 31,
2000 1999
------------ ------------
(In thousands)
(Unaudited)
Three Months
Ended
------------------
April April
29, 2001 30, 2000
-------- --------
Cash flows from operating activities:
Net income........................................................................income................................................ $ 68,87725,867 $ 23,51118,287
Adjustments to reconcile net income to net cash provided
by operating activities:
Depreciation and amortization.................................................... 10,721 6,143amortization............................ 6,195 3,048
Deferred income taxes.................................... 4,154 --
Amortization of deferred compensation............................................ 103 578
Common stock issued in exchange for assets and services.......................... 1,382 9compensation.................... 4 53
Tax benefit from employee stock plans............................................ 53,424 1,857plans.................... 15,214 13,977
Changes in operating assets and liabilities:
Accounts receivable............................................................. (37,128) (43,238)
Inventory....................................................................... (55,561) 16,889receivable..................................... 18,359 (4,774)
Inventory............................................... 3,135 (17,610)
Prepaid income taxes.................................... (42,520) --
Prepaid expenses and other current assets....................................... (26,553) (2,610)
Depositassets............... (2,816) (9,427)
Deposits and other assets........................................................ (8,496) (2,797)assets............................... 81 (1,087)
Accounts payable................................................................ 21,306 8,047payable........................................ (193) 3,367
Accrued liabilities............................................................. 24,299 2,179liabilities..................................... 8,198 4,792
-------- --------
Net cash provided by operating activities.......................................... 52,374 10,568activities................ 35,678 10,626
-------- --------
Cash flows used in investing activities:
Purchase of property and equipment................................................ (21,594) (9,949)equipment........................ (31,741) (7,451)
Acquisitions of businesses................................ (63,610) --
Deposit of restricted cash................................ (3,550) --
-------- --------
Net cash used in investing activities..................... (98,901) (7,451)
-------- --------
Cash flows from financing activities:
Payments under lineIssuance costs--convertible notes......................... (18) --
Issuance costs--public offering of credit..................................................... -- (5,000)
Convertible notes - net of issuance costs......................................... 290,838 --common stock........... (17)
Common stock issued under employee stock plans............................................. 16,513 4,949plans............ 16,514 5,566
Advance in connection with Microsoft agreement....................................development agreement.......... -- 200,000 --
Sale of common stock under public offering, net of issuance costs................. 96,611 5,740
Payments under capital leases..................................................... (1,419) (1,365)leases............................. (230) (501)
-------- --------
Net cash provided by financing activities.......................................... 602,543 4,324activities................ 16,249 205,065
-------- --------
Change in cash and cash equivalents................................................ 633,323 4,943equivalents........................ (46,974) 208,240
Cash and cash equivalents at beginning of period...................................period........... 674,275 61,560 50,257
-------- --------
Cash and cash equivalents at end of period......................................... $694,883 $ 55,200period................. $627,301 $269,800
======== ========
Cash paid for interest.............................................................interest..................................... $ 1217,364 $ 18651
======== ========
Cash paid for taxes................................................................taxes........................................ $ 23334,084 $ 12,665
======== ========
Noncash financing and investing activities:
Assets recorded under capital lease............................................... $ -- $ 1,168
======== ========
Receipt of common stock in settlement of accounts receivable...................... $ -- $ (7,452)
======== ========
Issuance of common stock in connection with long-term software license............ $ -- $ 5,000
======== ========
Liabilities assumed in connection with long-term software license................. $ -- $ 5,00071
======== ========
See accompanying notes to condensed consolidated financial statements.
5
NVIDIA CORPORATION AND SUBSIDIARIES
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
(In thousands)
1.(1) Basis of presentation
The accompanying condensed consolidated unaudited financial statements of
NVIDIA Corporation (the Company or NVIDIA) have
been prepared in accordance with generally accepted accounting principles for
interim financial information and with the instructions to Form 10-Q and
Article 10 of Regulation S-X. Accordingly, they do not include all of the
information and notes required by generally accepted accounting principles for
annual financial statements. In the opinion of management, all adjustments,
consisting only of normal recurring adjustments except as otherwise noted,
considered necessary for a fair presentation have been included. The results
for the interim periods presented are not necessarily indicative of the results
that may be expected for any future period. The following information should be
read in conjunction with the financial statements and notes thereto included in
the Company's Annual Report on Form 10-K for the year ended January 30, 2000.
2. Net income per share
Basic28, 2001.
Reclassifications
Certain prior year balances have been reclassified to conform to the current
period presentation.
(2) Business Combinations
During the three months ended April 29, 2001, the Company completed the
purchase of certain assets from various businesses, including 3dfx Interactive,
Inc. ("3dfx"), for an aggregate purchase price of approximately $83.4 million.
These acquisitions have been accounted for under the purchase method of
accounting. Excluding the 3dfx transaction, the aggregate purchase price is
immaterial to the financials of the Company.
On April 18, 2001, the Company completed the purchase of certain assets of
3dfx, including patents and patent applications. Under the terms of the Asset
Purchase Agreement, the cash consideration due at the closing was $70.0
million, less $15.0 million that was loaned to 3dfx pursuant to a Credit
Agreement dated December 15, 2000, between the Company and 3dfx. Pursuant to
the Asset Purchase Agreement, following the closing, the Company is to pay 3dfx
additional consideration in the form of stock equal to one million shares of
the Company's common stock, subject to 3dfx satisfying certain conditions. If
the debts and liabilities of 3dfx cannot be satisfied, under some
circumstances, 3dfx could receive a post-closing advance from the Company of up
to $25.0 million and this advance would reduce the number of shares of the
Company's common stock receivable by 3dfx by up to 500,000 shares.
Consequently, due to the possibility of contingent consideration, the
components of the estimated purchase price could differ from that presented
below. In addition, following the closing, the Company and 3dfx filed a
stipulation to dismiss with prejudice the patent litigation between the
parties. The litigation was dismissed on April 26, 2001, pursuant to a judicial
order.
The initial 3dfx asset purchase price of $70.0 million and direct
transaction costs of $4.4 million related to the closing were allocated based
on fair values as follows:
Straight-Line
Amortization
3dfx Period
-------------- -------------
(In thousands) (Years)
Workforce in place............................. $ 3,010 2
Patents and trademarks......................... 11,510 5
Goodwill....................................... 59,927 5
-------
Total.......................................... $74,447
-------
The final allocation will depend upon the composition of 3dfx assets
acquired and the Company's evaluation of the fair value of the net assets.
Consequently, the actual allocation of the purchase price could differ from
that presented above.
6
NVIDIA CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS--(Continued)
(Unaudited)
Pro Forma Results of Operations
The following summary, prepared on a pro forma basis, presents the results
of operations as if 3dfx assets had been purchased as of the beginning of the
periods presented. Pro forma net income per share is computed usingfor the weighted average numberthree months ending April 29,
2001 includes the impact of common shares outstanding duringamortization of goodwill and intangible assets of
$4.2 million. Excluded are acquisition related charges that consist of
recruiting expenses and bonuses of $9.6 million and assumed tax benefits of
$1.8 million. For the period. Dilutedthree months ending April 30, 2000, pro forma net income
per share is
computed usingincludes the weighted average numbersame amount of commonamortization of goodwill and dilutive common
equivalent shares outstanding during the period, using the as-if-converted
method for convertible debtintangible assets.
Also included are assumed salary related expenses of $4.2 million and convertible preferred stock and the treasury
stock method for options and warrants. Equivalent sharestax
benefits of 605,000 for
convertible debt outstanding during the quarter were not included in the
computation of diluted earnings per share because the effect would be anti-
dilutive.$2.7 million.
Three Months Ended
Nine--------------------
April April 30,
29, 2001 2000
-------- -----------
(In thousands)
Pro forma revenue..................................... $240,932 $148,483
Pro forma net income.................................. $ 30,112 $ 12,626
Pro forma basic net income per share.................. $ 0.43 $ 0.20
Pro forma diluted net income per share................ $ 0.36 $ 0.16
(3) Net Income Per Share
Basic net income per share is computed using the weighted average number of
common shares outstanding during the period. Diluted net income per share is
computed using the weighted average number of common and dilutive common
equivalent shares outstanding during the period, using either the as-if-
converted method for convertible debt and the treasury stock method for
options. Equivalent shares of 3,235,897 for convertible debt outstanding during
the quarter were not included in the computation of diluted earnings per share
because the effect would be anti-dilutive.
Three Months Ended
---------------------------- --------------------------
October--------------------
April April 30,
29, October 31, October 29, October 31,2001 2000
1999 2000 1999-------- -----------
----------- ----------- -----------(In thousands)
Denominator:
Denominator for basic net income per share-weighted-share, weighted
average shares............................................. 66,003 60,030 64,660 59,090shares..................................... 69,322 63,360
Effect of dilutive securities:
Stock options outstanding................................... 14,432 11,367 14,574 11,624
Warrants.................................................... -- -- -- 188
Common stock issuable in connection with long-term
software license............................................ -- 466 -- 324
------ ------ ------ ------outstanding:.......................... 13,534 14,418
-------- --------
Denominator for diluted net income per share................. 80,435 71,863 79,234 71,226
====== ====== ====== ======
3. Comprehensive income
The Company had no other components of comprehensive income other than the
reported amounts of net income.
4.share.......... 82,856 77,778
======== ========
(4) Inventory
OctoberApril January 28,
29, January 30,
2000 2000
------- -------2001 2001
-------- -----------
(In thousands)
Raw material.......................................... $ 13,508 $ 22,906
Work in-process......................................... $14,810in-process....................................... 18,129 11,815
Finished goods........................................ 55,133 55,184
-------- --------
Total inventory................................... $ 6,446
Finished goods.......................................... 78,382 31,185
------- -------
Total inventory....................................... $93,192 $37,631
======= =======86,770 $ 89,905
======== ========
At OctoberApril 29, 2000,2001, the Company had noncancelablenon-cancelable inventory purchase
commitments totaling $139.2$70.7 million.
67
NVIDIA CORPORATION AND SUBSIDIARIES
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS STATEMENTS--(Continued)
(Unaudited)
(In thousands)
5. Segment Information
The Company operates in a single industry segment: the design, development and
marketing of 3D graphics processors for the entire desktop personal computer
(PC) market, from professional workstations to low-cost PCs.(5) Accrued Liabilities
April 29, January 28,
2001 2001
--------- -----------
(In thousands)
Accrued sales and marketing allowances................. $ 24,173 $ 10,154
Taxes payable.......................................... 11,024 10,369
Accrued payroll and related expenses................... 8,307 11,026
Other.................................................. 2,200 5,957
-------- --------
Total accrued liabilities............................ $ 45,704 $ 37,506
======== ========
(6) Segment Information
The Company operates in a single industry segment: the design, development
and marketing of 3D graphics processors for the PC market. The Company's chief
operating decision maker, the Chief Executive Officer, reviews financial
information presented on a consolidated basis for purposes of making operating
decisions and assessing financial performance. Enterprise-wide information
provided on geographic sales is based upon the billing location of the
customer. The following table summarizes geographic information on net sales:
Three Months Ended
Nine Months Ended
---------------------------- ----------------------------
October---------------------
April 29, October 31, October 29, October 31,April 30,
2001 2000
1999 2000 1999
-------- ------- -------- ----------------- -----------
(In thousands)
United States...........................................Revenue:
U.S................................................... $ 13,491 $23,45115,249 $ 51,638 $ 86,82114,845
Asia Pacific............................................ 156,894 50,264 388,215 123,170
Europe.................................................. 27,780 23,300 77,193 36,059
-------- -------Pacific.......................................... 211,625 109,885
Europe................................................ 14,058 23,753
-------- --------
Total revenues......................................... $198,165 $97,015 $517,046 $246,050
======== =======revenue........................................ $240,932 $148,483
======== ========
RevenueRevenues to significant customers, those representing approximately 10% or
more of total revenue and accounts receivable for the respective periods isand the related accounts
receivable, are summarized as follows:
Three Months Ended
Nine Months Ended
------------------------------ ------------------------------
October---------------------
April 29, October 31, October 29, October 31,April 30,
2001 2000
1999 2000 1999
---- ---- ---- ------------- -----------
Sales
EDOM................................................... 24% 16%Revenue:
Creative.............................................. -- 12%
EDOM.................................................. 30% 23%
16%
Asustek................................................ASUSTeK............................................... 7% 11%
12% 10% 10%
Mitac.................................................. 11% 1% 6% --
Celestica.............................................. 10%Altantic.............................................. 14% 3% 10% 1%
Diamond.............................................. -- 15% -- 21%
Creative............................................... 4% 10% 7% 15%
Guillemot.............................................. 8% 11% 5% 6%
As of ---------------------------
OctoberAs of
April 29, January 30,
2000 2000
---- ----28,
2001 2001
--------- -----------
Accounts receivable
EDOM................................................... 14% 12%
Asustek................................................ 10% 6%
Mitac.................................................. 8%Receivable:
Creative.............................................. -- 1%
Celestica.............................................. 14% 13%
Diamond................................................ -- 4%
Creative............................................... 6% --
Guillemot.............................................. 13% 8%EDOM.................................................. 23% 18%
ASUSTeK............................................... 3% 7%
Altantic.............................................. 5% 3%
78
NVIDIA CORPORATION AND SUBSIDIARIES
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS STATEMENTS--(Continued)
(Unaudited)
(In thousands)
6. Recent Accounting Pronouncements
In June 1998, the Financial Accounting Standards Board (FASB) issued Statement
of Financial Accounting Standards No. 133, "Accounting for Derivative
Instruments and Hedging Activities" or SFAS 133. SFAS 133, as amended by SFAS
No. 137 and No. 138, establishes accounting and reporting standards for
derivative instruments and for hedging activities. It requires that an entity
recognize all derivatives as either assets or liabilities in the balance sheet
and measure those instruments at fair value. Management does not expect the
adoption of SFAS 133 to have a material impact on the Company's results of
operations, financial position or cash flows. The Company is required to adopt
SFAS 133, as amended, in fiscal 2002.
In December 1999, the Securities and Exchange Commission (SEC) issued Staff
Accounting Bulletin No. 101, "Revenue Recognition in Financial Statements" or
SAB 101. SAB 101 summarizes certain of the staff's views in applying generally
accepted accounting principles to selected revenue recognition issues. The
Company is required to adopt SAB 101 by the fourth quarter of the fiscal year
2001. The SEC recently issued implementation guidance in the form of
"Frequently asked Questions and Answers." The Company's preliminary conclusion
is that the implementation of SAB 101 will not have a material impact on its
financial position, results of operations or cash flows.
In March 2000, the Emerging Issues Task Force ("EITF") issued EITF No. 00-02,
"Accounting for Web Site(7) Development Costs." EITF No. 00-2 establishes
accounting and reporting standards for capitalization of web site development
costs in accordance with Statement of Position No. 98-1. EITF No. 00-2 is
effective for web site development costs incurred for fiscal quarters beginning
after June 30, 2000. Management believes that EITF 00-02 will not have a
material impact on the Company's financial position, results of operations or
cash flows.
The "EITF" issued EITF No. 00-10, "Accounting for Shipping and Handling Fees
and Costs." EITF 00-10 establishes accounting and reporting standards for the
classification of shipping and handling costs, as well as costs incurred related
to shipping and handling. EITF 00-10 is effective for the fourth quarter of
fiscal years beginning after December 15, 1999. Adoption of this EITF is not
expected to have a material impact on the results of operations, financial
position or cash flows.
7. Long-term Software Licensing Agreement
On April 12, 1999, the Company entered into a $10.0 million five-year software
licensing agreement with a supplier in the electronic design automation
industry. Under this agreement, the $10.0 million is due in two installments.
The first installment was settled in June 1999 for 487,804 shares of the
Company's common stock valued at $5.0 million. The second installment was
settled in cash on March 31, 2000.
8
8. Microsoft AgreementAgreements
On March 5, 2000, the Companywe entered into an agreement with Microsoft pursuant toin which the Companywe
agreed to develop and sell graphics chips and to license certain technology to
Microsoft and its licensees for use in the Xbox video game console under
development by Microsoft. In April 2000, Microsoft paid the Company $200us $200.0 million as an
advance against graphics chip purchases. Microsoft may terminate the agreement
at any time. If termination occurs prior to offset in full of the advance
payments, the Companywe would be required to return to Microsoft up to $100$100.0 million of
the prepayment and to convert the remainder into our preferred stock of the Company at a 30%
premium to the 30-day average trading price of itsour common stock preceding
Microsoft's termination of the agreement. In addition, in the event that an
individual or corporation makes an offer to purchase shares equal to or greater
than thirty percent (30%) of the outstanding shares of the Company'sour common stock,
Microsoft has first and last rights of refusal to purchase the stock. The
graphics chip contemplated by the agreement is highly complex, and the
development and release of the Microsoft Xbox video game console and its
commercial success are dependent upon a number of parties, such as hardware and
software developer, and a number of factors, many of which are outside of our
control. On February 14, 2001, we announced that the Xbox GPU and Xbox media
communications processor were released to Taiwan Semiconductor Manufacturing
Company cannot control.for prototype fabrication.
(8) Litigation
On February 22, 2000, Graphiques Matrox, Inc. and Systemes Electroniques
Matrox Ltd. (collectively "Matrox") filed suit against us in the Superior
Court, Judicial District of Montreal, Province of Quebec, Canada. The Company cannot
guaranteesuit
alleges that we improperly solicited and recruited Matrox employees and
encouraged Matrox employees to breach their Matrox confidentiality and/or non-
competition agreements. The suit by Matrox seeks, among other things, certain
injunctive relief. We believe that the claims asserted by Matrox are without
merit and we intend to vigorously defend this suit. The trial of this matter
started on April 4, 2001. On April 24, 2001, the trial ended and the court took
the case under submission. The court indicated that it will be successful in developing the graphics chip for use by
Microsoft or that the product will be developed or released, or if released,
will be commercially successful.
9. Stockholders' Equity and Stock Split
In May 2000, the Company's Board of Directors approvedwould not likely issue a
two-for-one stock
split of the Company's common stock for stockholders of record on June 12, 2000,
effected in the form of a 100% stock dividend. The transfer agent distributed
the shares resulting from the split on June 26, 2000. All share and per-share
numbers contained herein reflect this stock split.
In October 2000, the Company sold an additional 1,400,000 shares of its common
stock to the public for net proceeds of approximately $96.6 million, after
deducting underwriting discounts, commissions and expenses of the offering.
10. Debt
In October 2000, the Company sold $300 million of Convertible Subordinated
Notes (the Notes) due October 15, 2007. Proceeds net of issuance costs were
$290.8 million. Issuance costs are being amortized to interest expense on a
straight-line basis over the term of the notes. Interestfinal decision on the Convertible
Subordinated Notes accrues at the rate of four and three-quarters percent per
annum and is payable semiannually in arrears on April 15 and October 15 of each
year, commencing April 15, 2001. The Convertible Subordinated Notes are
redeemable at the Company's option on and after October 20, 2003. The Notes are
convertible at the option of the holder at any time prior to the close of
business on the maturity date, unless previously redeemed or repurchased, into
shares of common stock at a conversion price of $92.71 per share, subject to
adjustment in certain circumstances. In connection with its debt financing
arrangement, the Company incurs certain direct, incremental costs from third
parties who perform services that assist in the closing of the related
transactions. These costs are included in deposits and other assets on the
balance sheet and amortized using the straight line method over the term of the
financing.
11. Legal Proceedingsmerits for approximately two months.
On September 21, 1998, 3Dfx3dfx Interactive, Inc. (3Dfx) filed a patent infringement
lawsuit against the Companyus in the United States District Court for the Northern
District of California alleging infringement of a 3Dfx3dfx patent. The lawsuit was
amended in 1999 to add two additional 3dfx patents. On March 2, 1999, 3Dfx addedAugust 28, 2000, we
filed a second patent toinfringement lawsuit against 3dfx in the suit and on May 24, 1999, 3Dfx
added a third patent toUnited States District
Court for the suit.Northern District of California alleging infringement by 3dfx of
five of our patents. The amended complaint allegesby 3dfx alleged that the
Company'sour RIVA TNT, RIVA TNT2
and RIVA TNT2TNT Ultra products infringeinfringed the patents in suit and seekssought
unspecified compensatory and trebled damages and attorney's fees. The Company'sfees, as well as
injunctive relief. Our current generation of products iswas not identified as
infringing any of the patents in suit. The Company haslawsuit filed an answer and
counter-claims assertingby us against 3dfx
alleged that the patents in suit are invalid and not infringed.
These assertions are supported by The Company's investigations to
9
date and an opinion from the Company's patent counsel in this suit. The District
Court has issued its claim construction ruling and the trial is scheduled to
start on May 22, 2001.
On August 28, 2000, the Company filed a patent infringement lawsuit against
3Dfx in the United States District Court for the Northern District of
California. The lawsuit alleges that 3Dfx's3dfx's graphics chips and card products, which arewere used to
accelerate 3D graphics on personal computers, infringeinfringed five of the Company'sour patents and
seekssought an injunction restraining 3Dfx3dfx from manufacturing, selling, or importing
infringing graphics chips and card products, including its Voodoo3, Voodoo4,
Voodoo5 and VSA-100 family of products, as well as monetary damages. On February 22, 2000, Graphiques Matrox, Inc.Following
the closing of the definitive agreement entered into by us, NVIDIA US
Investment and Systemes Electroniques
Matrox3dfx, we and 3dfx jointly filed to dismiss with prejudice the
above-described patent litigation between us.
Sunonwealth Electric Machine Industry Co., Ltd. (collectively "Matrox") filed suita complaint against
the Company in the
Superior Court, Judicial District of Montreal, Province of Quebec, Canada. The
suit alleges that the Company improperly solicited and recruited Matrox's
employees and encouraged Matrox's employees to breach their Matrox
confidentiality and/or non-competition agreements. The suit by Matrox seeks,
among other things, certain injunctive relief. The Company believes that the
claims asserted by Matrox are without merit and the Company intends to
vigorously defend this suit. The trial of this matter is scheduled for April 4,
2001.
On May 19, 2000, the Company filed suit against Matrox in Santa Clara County
Superior Court alleging that Matrox's efforts to prevent its current and former
employees from pursuing employment opportunities with the Company constitute
interference with prospective economic advantage, interference with contract and
unfair competition. The Company's suit seeks, among other things, unspecified
monetary damages, a declaration that Matrox's confidentiality and/or non-
competition agreements are unenforceable under California law and a declaration
that Matrox's use of those agreements and other tactics constitutes unfair
competition. On May 26, 2000, the case was transferred to the San Jose Division
of the United States District Court for the NorthernCentral District of
California, Case Number CV-01-00870 CBM (CTx), for infringement of US Patent
Nos. 6,109,892 and 6,114,785. The other defendants are Creative Technology,
Ltd.,
9
NVIDIA CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS--(Continued)
(Unaudited)
a Singapore corporation and Creative Labs, Inc., a California corporation. A
related case is Sunonwealth v. Adda Corporation, et al, filed in the Unites
States District Court for the Central District on October 19, 2001, with case
number 00-CV-1041. The patents are for a positioning device for a sensor
element of a miniature fan. The Company purchased these fans from Adda. Adda
has agreed to defend the Company in this suit through the law firm of Mount &
Stoelker of San Jose, California. On
June 14, 2000, Matrox filed an answer denyingAdda shall pay all fees and costs incurred in
connection with Mount & Stoelker's representation of the Company and may
control the defense and settlement of the lawsuit. The Company may elect to
have its own counsel involved in the lawsuit, to confer with Mount & Stoelker
and to otherwise review and keep the Company apprised of the work performed by
Mount & Stoelker. However, such separate counsel shall be at the Company's claimssole
cost and a
counterclaim alleging trade secret misappropriation, intentional interference
with contractual relations and unfair competition. Matrox's Californiaexpense. In the event that this lawsuit proceeds to judgment based
upon liability for infringement of the patents in suit, seeks unspecified monetary damages and injunctive relief. The Company filed an
answerAdda has agreed to this counterclaim on July 7, 2000, denying all of Matrox's claims. As
withpay
that judgment rendered against the Montreal action,Company. Also, Adda shall pay any settlement
to the Company believesextent that the claims asserted by
Matrox are without merit and the Company intends to vigorously defend this suit.
12. Double Data Rate (DDR) Non-High Speed Memory
In accordance with EITF 99-19: Reporting Revenue Gross as a Principle
versusNet as an Agent,Company's liability in the third quartersuch settlement arises from
patent infringement resulting from its purchase of fiscal 2001, the Company began
accounting for revenue and the cost of revenue for its non-high speed DDR and
single data rate (SDR) memory on a net basis as a component of total revenues.
The Company is acting in the capacity of an agent for this product. In
accordance with EITF 99-19, prior period amounts for DDR and SDR were restated
to comply with this classification.products from Adda.
10
Item 2: Management's Discussion and Analysis of Financial Condition and Results
of OperationsITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS
The following discussion contains forward-looking statements within the
meaning of Section 27A of the Securities Act of 1933 and Section 21E of the
Securities Exchange Act of 1934, which are subject to the "safe harbor" created
by those sections. These forward-looking statements include but are not limited
to: statements related to industry trends and future growth in the markets for
3D graphics processors; our product development efforts; the timing of our
introduction of new products; industry and consumer acceptance of our products;
and future profitability. These forward-looking statements involve risks and
uncertainties that could cause our actual results to differ materially from
those made in the forward-looking statements. We undertake no obligation to publicly
release any revisions to the forward-looking statements or reflect events or
circumstances after the date of this document. The "Certain Business Risks"
section, among other things, should be considered in evaluating our prospects
and future financial performance.
Overview
We design, develop and market graphics processors and related software for
personal computers and digital entertainment platforms. We provide a "top-to-bottom""top-to-
bottom" family of award-winning performance 3D graphics processors graphics processing units orand GPUs, and related software
that set the standard for performance, quality and features for a broad range
of desktop PCs, from professional workstations to low-cost PCs.PCs, and mobile PCs,
from performance laptops to thin-and-light notebooks. Our 3D graphics
processors are used infor a wide variety of applications, including games,
digital image editing, business productivity, the Internet and industrial
design. Our graphics processors were the first to incorporate a 128-bit multi-texturingmulti-
texturing graphics architecture designed to deliver to users of our products a
highly immersive, interactive 3D experience with compelling visual quality,
realistic imagery and motion, stunning effects and complex object and scene
interaction at real-time frame rates. The NVIDIA TNT2, TNT2 M64 and Vanta
graphics processors deliver high performance 3D and 2D graphics at affordable
prices, making them the graphics hardware of choice for a wide range of
applications for both consumer and commercial use. Our graphics processors are
designed to be architecturally compatible backward and forward between
generations, giving our original equipment manufacturer, or OEM, customers and
end users a low cost of ownership. We are recognized for developing the world's
first GPU, the GeForce 256, which incorporates independent hardware transform
and lighting processing units along with a complete rendering pipeline into a
single-chip architecture. Our GPUs the GeForce3, the GeForce2 Ultra, the
GeForce2 GTS, the GeForce2 MX, the GeForce 256,GeForce2 Go, the NVIDIA Quadro2 Pro and the
Quadro2 MXR and Quadro, process hundreds of billions of operations per second and increase
the PC's ability to render high-definition 3D scenes in real-time. The GeForce 256, QuadroOur GPU
family provides superior processing and GeForce2 family of GPUs providerendering power at competitive prices
and is architected to deliver the capability for
content developers to build a new generation of entertainment, e-commerce, e-
businessmaximum performance from industry standards
such as Microsoft's Direct3D Application Programming Interface, or API and
education applications. We also developed an integrated core
logic/graphics chipset called Aladdin TNT2 through a partnership with Acer
Laboratories,Silicon Graphics, Inc.'s or ALi, one of the leading suppliers of core logic chipsets
for the PC. The Aladdin TNT2 chipset brings NVIDIA-class graphics performanceSGI's OpenGL API on Windows operating systems and
quality to the value PC segment.Linux platforms.
We recognize revenue from product sales revenue uponto customers when a contract is in
place, the price is determined, shipment net of appropriate
allowances.is made and collectability is
reasonably assured. Our policy on sales to distributors is to defer recognition
of sales and related gross profitcost of sales until the distributors resell the product.
Royalty revenue is generally recognized upon shipment of product by the licensee to its
customers. We believe that the software sold with our products is incidental to
the licensee's customers. In accordance with EITF 99-19: Recording Revenue Grossproduct as a Principle versus Net as an Agent, in the third quarter of fiscal 2001, we
began accounting for revenue and the cost of revenue for our non-high speed DDR
and SDR memory on a net basis as a component of total revenues. We are acting in
the capacity of an agent for this product.whole.
Currently, all of our product sales and our arrangements with third-party
manufacturers provide for pricing and payment in U.S. dollars. We have not
engaged in any foreign currency hedging activities, although we may do so in
the future. Since we have no other product line, our business would suffer if
for any reason our graphics processors do not achieve widespread acceptance in
the PC market.
A majority of our sales have been to a limited number of customers and sales
are highly concentrated. We sell graphics processors to add-in board and
motherboard manufacturers, primarily AsustekASUSTeK Computer Inc., Creative Technology
Ltd., ELSA AG
Corporation, and Guillemot Corporation, and contract electronicsequipment manufacturers,
or CEMs,CEMs; including Celestica Hong Kong Ltd., Mitac International Corporation,
Micro-Star International Co., Ltd., or MSI, SCI Systems, Inc., and VisionTek Inc. These
manufacturers incorporate our processors in the boards they sell to PC OEMs,
11
retail outlets and systems integrators. The average selling prices for our
products, as well as our customers' products, vary by distribution channel. Our
two largest customers accounted for approximately 44% of revenues for first
quarter of fiscal 2002. Sales to Edom Technology Co., Ltd., an Asian distributor, accounted for 24%,
sales to Mitac and Asustek accounted for 11%30% and sales to CelesticaAtlantic
Semiconductor accounted for 10%14% of our total revenue for the thirdfirst quarter of
fiscal 11
2001.2002. For the first nine monthsquarter of fiscal 2001, sales to EdomCreative
Technology, Ltd. accounted for 23%,
and sales to Celestica and Asustek accounted for 10% of our total revenue. For
the third quarter of fiscal 2000, sales to Edom accounted for 16%, sales to
Diamond Multimedia Systems, Inc. accounted for 15%, sales to Asustek accounted
for 12%, sales to Guillemot accounted for 11% and sales to Creative accounted
for 10% of our total revenue. For the first nine months of fiscal 2000, sales to
Diamond Multimedia Systems, Inc. accounted for 21%, sales to Edom accounted for 16%,23% and sales
to CreativeASUSTeK accounted for 15%11% of our total revenue. Diamond is no
longer one of our significant customers following its acquisition by S3
Incorporated in October 1999. The number of potential
customers for our products is limited, and we expect sales to be concentrated
to a few major customers for the foreseeable future.
As markets for our 3D graphics processors develop and competition increases,
we anticipate that product life cycles in the high end will remain short and
average selling prices will continue to decline. In particular, average selling
prices and gross margins are expected to decline as each product matures. Our
add-in board manufacturers and major OEM customers typically introduce new
system configurations as often as twice per year for the high end, typically
based on spring and fall design cycles. In order to maintain average selling
prices and gross margins, our existing and new products must achieve
competitive performance levels to be designed into new system configurations
and must be produced at low costs, in sufficient volumes and on a timely basis,
especially with respect to our new products.
We currently utilize Taiwan Semiconductor Manufacturing Company, or TSMC,
as
our primary manufacturer, to produce semiconductor wafers, and utilize
independent contractors to perform assembly, test and packaging. We depend on
these suppliers to allocate to us a portion of their manufacturing capacity
sufficient to meet our needs, to produce products of acceptable quality and at
acceptable manufacturing yields, and to deliver those products to us on a
timely basis. These manufacturers may not always be able to meet our near-term
or long-
termlong-term manufacturing requirements. Yields or product performance could
suffer due to difficulties associated with adapting our technology and product
design to the proprietary process technology and design rules of a new
manufacturer. The level of finished goods inventory we maintain may fluctuate
and therefore a manufacturing disruption experienced by these manufacturers
would impact the production of our products, which could harm our business. In
addition, as the complexity of our products and the accompanying manufacturing
process increases, there is an increasing risk that we will experience problems
with the performance of new products and that there will be yield problems or
other delays in the development or introduction of these products.
Substantially all of our sales are made on the basis of purchase orders
rather than long-term agreements. As a result, we may commit resources to the
production of products without having received advance purchase commitments
from customers. Any inability to sell products to which we have devoted
significant resources could harm our business. In addition, cancellation or
deferral of product orders could result in our holding excess inventory, which
could adversely affect our profit margins and restrict our ability to fund
operations. We may build memory and component inventories during periods of
anticipated growth and in connection with selling workstation boards directly
to major OEMs. We could be subject to excess or obsolete inventories and be
required to take corresponding write-downs if growth slows or if we incorrectly
forecast product demand. A reduction in demand could negatively impact our
gross margins and financial results. Product returns or delays or difficulties
in collecting accounts receivable could result in significant charges against
income, which could harm our business.
On April 18, 2001, we completed the purchase of certain assets of 3dfx,
including patents and patent applications. Under the terms of the Asset
Purchase Agreement, the cash consideration due at the closing was $70.0
million, less $15.0 million that was loaned to 3dfx pursuant to a Credit
Agreement dated December 15, 2000, between us and 3dfx. Pursuant to the Asset
Purchase Agreement, following the closing, we are to pay 3dfx additional
consideration in the form of stock equal to one million shares of NVIDIA common
stock, subject to 3dfx satisfying certain conditions. In addition, following
the closing, we and 3dfx filed a stipulation to dismiss with prejudice the
patent litigation between us. The litigation was dismissed on April 26, 2001,
pursuant to a judicial order. The transaction is accounted for under the
purchase method of accounting.
12
Results of Operations
The following table sets forth, for the periods indicated, certain items in
our condensed consolidated statements of operationsincome expressed as a percentage of
total revenues.revenue.
Three Months Ended
Nine Months Ended
October-------------------
April 29, October 31, October 29, October 31,April 30,
2001 2000
1999 2000 1999
----------- ----------- ---------- -------------------- ---------
Revenues...................................... 100.0% 100.0%Revenue................................................ 100.0% 100.0%
Cost of revenues.............................. 62.9revenue........................................ 62.0 62.7 63.3
----- -----62.6
----- -----
Gross profit.................................. 37.1profit........................................... 38.0 37.3 36.737.4
Operating expenses:
Research and development..................... 11.1 12.8 11.6development............................. 13.0 12.0
Sales, general and administrative............ 7.5 9.6 8.0 10.0
----- -----administrative.................... 7.8 8.2
Amortization of goodwill and purchased intangible
assets.............................................. 0.3 --
Acquisition related charges.......................... 4.0 --
----- -----
Total operating expenses.................. 18.6 22.4 19.6 23.0
----- -----expenses........................... 25.1 20.2
----- -----
Operating income.............................. 18.5 15.6 17.7 13.7income................................... 12.9 17.2
Interest and other income, net................net......................... 2.3 0.4 1.9 0.5
----- -----0.9
----- -----
Income before income tax expense.............. 20.8 16.0 19.6 14.2expense....................... 15.2 18.1
Income tax expense............................ 6.7 5.1 6.3expense..................................... 4.6 ----- -----5.8
----- -----
Net income.................................... 14.1% 10.9 13.3% 9.6%
===== =====income......................................... 10. 6% 12.3%
===== =====
Three Months Ended April 29, 2001, and Nine Months Ended October 29, 2000 and October 31, 1999April 30, 2000.
Revenue
Revenue increased 104%by 62.3% to $198.2$240.9 million in the third quarterthree months ended OctoberApril
29, 2000 from $97.0 million in the third quarter ended October 31, 1999.
Revenues of $517.0 million for the first nine months of fiscal 2001 grew 110%
over the first nine months of fiscal 2000.2001. The growth was primarily the result of increased sales of our
RIVA TNT2 and GeForce families of graphics processors
related to commercial desktop wins and the strong demand for our new products which haveat higher unit
average selling prices. We began bundling double data
rate memories with GeForce products sold in the third quarter of fiscal 2000.
Revenue derived from the bundling of double data rate memories with a portion of
our GeForce products totaled $15.0 million in the third quarter and $44.3
million in the first nine months of fiscal 2001. Revenue from sales outside of the United States
accounted for 93% of total revenue for the third quarter94% and 90% of total revenue for the first ninethree months of fiscal
2001. Revenue from
sales outside of the U.S. represented 76% of total revenue in the third quarter2002 and 65% in the first nine months of fiscal 2000.2001, respectively. Our international revenue increased 151%69% to $184.7$225.7
million for the thirdfirst quarter of fiscal 20012002 from $73.6$133.6 million a year ago.
This increase in revenue from sales outside of the United States is primarily
attributable to (i) expanded use of contract equipment
manufacturers or CEMs, and add-in board and motherboard
manufacturers located outside of the United States, and (ii) increased demand
for our products in the Asia Pacific and European regions. Revenue by
geographical region is allocated to individual countries based on the location
to which the products are initially shipped.billed. The portion of revenue derived from
foreign CEMs and add-in board manufacturers that are attributable to end
customers in the U.S.United States is not separately disclosed. Although we
achieved substantial growth in product revenue fromfor the first nine monthsquarter of fiscal 2000 to2002
from the same period in fiscal 2001,a year ago, we do not expect to sustain this rate of
growth in future periods. In addition, we expect that the average selling
prices of our products will decline over the lives of the products. The
declines in average selling prices of 3D graphics processors generally may also
accelerate as the market develops and competition increases.
Gross Profit
Gross profit consists of total revenuesrevenue net of allowances less cost of
revenues.revenue. Cost of revenuesrevenue consists primarily of the costs of semiconductors
purchased from contract manufacturers including(including assembly, test and packaging,packaging),
manufacturing support costs (labor and overhead associated with such
purchases), inventory provisions and shipping costs. Our gross profit margin
can vary in any period depending uponon the mix of types of graphics processors
sold. Our gross profit margin percentage decreased slightlyincreased 65% from 38.0% in the thirdfirst quarter of fiscal
20002001 to 37.1% the
13
same period of fiscal 2001, and increased slightly from
36.7% for the first nine months of fiscal 2000 to 37.3% for the same period of
fiscal 2001. Absolute dollar gross profit margin increased for the third
quarter and first nine months of fiscal 2001 compared to the same periods in
fiscal 20002002, primarily due to an increasesignificant increases in unit
shipments. We beganshipments and the bundling of
13
double data rate memories with our GeForce processors in the second half of
fiscal 2000. The inclusionfavorable impact of the double data rate high speed memories has
reduced the grosshigher margin percentage but has no incremental impact on absolute
margin dollars, as they are sold at cost. We expect to continue bundling double
data rate memories with some ofRIVA TNT2 and GeForce
graphics processors, partially offset by declining profit margins in our high-performance products for at least the
next six months.older
product families. Although we achieved substantial growth in gross profit and gross profit
margin fromfor
the first ninethree months of fiscal 2000 to2002 from the same period of fiscal
2001,a year ago, we do
not expect to sustain these rates of growth in future periods.
Operating Expenses
Research and Development. Research and development expenses consist of
salaries and benefits, cost of development tools and software, costs of
prototypes of new products and consultant costs. Research and development
expenses increased by 77%75% from the thirdfirst quarter of fiscal 20002001 to the same
period of fiscal 2001, and 87% from the first nine months of fiscal 2000 to the
first nine months of fiscal 2001,2002, primarily due to new employees from 3dfx, other
additional personnel and related engineering costs to support development of our next
generationgeneration's products, such as depreciation charges incurred on capital
expenditures and software license and maintenance fees. We anticipate that we
will continue to devote substantial resources to research and development, and
we expect these expenses to increase in absolute dollars in the foreseeable
future due to increased complexity and the number of products under
development. Research and development expenses are likely to fluctuate from
time to time to the extent we make periodic incremental investments in research
and development and these investments may be independent of our level of
revenues.
Sales, General and Administrative. Sales, general and administrative
expenses consist primarily of salaries, commissions and bonuses, promotional
tradeshow and advertising expenses, travel and entertainment expenses and legal
and accounting expenses. Sales, general and administrative expenses increased
60%55% from the thirdfirst quarter of fiscal 2000 compared2001 to the same period of fiscal 2001, and 68%
from the first nine months of fiscal 2000 compared to the first nine months of
fiscal 2001,2002,
primarily due to costs associated with additional personnel and commissions and
bonuses on sales of the RIVA TNT2 and GeForce families of graphics processors, and the increase in bad debt provision of $2.0 million in
the second quarter of fiscal 2001 related to one customer that filed for
bankruptcy.graphic processors.
We expect sales and marketing expenses to continue to increase slightly in absolute
dollars for the fourth quarter of fiscal 2001 and as we continue to expand our operations and our sales, generalsales. General and
administrative expenses are also likely to increase in absolute dollars.dollars as we
continue to expand our operations. However, we do not expect significant
changes in these expenses as a percentage of revenue in future periods.
Amortization of goodwill and intangible assets. Amortization of goodwill and
purchased intangible assets consist primarily of goodwill and intangible assets
from the asset purchase of 3dfx. The initial allocation of the purchase price
was to workforce in place; amortized over two years, patents and trademarks;
amortized over five years and goodwill; amortized over five years. The final
allocation will depend upon the additional consideration given to 3dfx, subject
to 3dfx satisfying certain conditions. Consequently, the actual allocation of
the purchase price could differ from that presented in footnote 2, Business
Combinations.
Acquisition related charges. Acquisition related charges are attributable to
expenses related to the acquisition of 3dfx. These charges primarily consist of
recruiting expenses and bonuses for employees during the first quarter of
fiscal 2002.
Interest and Other Income (Expense), Net
Interest income primarily consists of interest earned on cash and cash
equivalents. Interest expense primarily consists of interest incurred as a
result of capital lease obligations and interest on our convertible debt.
Interest expense remained relatively flat inincreased for the third quarterfirst three months of fiscal 2001 as2002
compared to fiscal 2000. Interest expense should increase in future periods2001 due to the issuance of $300$300.0 million of convertible
debt in October 2000. Interest and other income increased $4.2 million from586% during the thirdfirst quarter
of fiscal 2000 to2002 from the same period ofin fiscal 2001. The increase was2001 due to higher average cash
balances as a result of a $200the $200.0 million advance received from Microsoft in
connection with our agreement with Microsoft and the receipt of $387.4 million
from our combined convertible debt and common stock offerings which closed in
October of fiscal 2001.
Income Taxes
We had an effectiveIncome taxes as a percentage of pretax income was 30% for the first quarter
of fiscal 2002 and 32% for the same period in fiscal 2001. Foreign income taxed
at rates different from United States statutory rates contributed to the lower
tax rate of 32% infor the first nine months ofquarter in fiscal 2001
and fiscal 2000. We anticipate our income tax rates for fiscal 2001 will be
relatively constant, but the rate depends on the income tax attributable to
foreign operations and availability of research and experimentation credits.2002.
14
Stock-Based Compensation
With respect to stock options granted to employees, we recorded deferred
compensation of $4.3 million in 1997 and $361,000 in the one month ended
January 31, 1998. These amounts are being amortized over the vesting period of
the individual options, generally four years. We amortized approximately $103,000$4,000
in the first ninethree months of fiscal 14
20012002 and $578,000$53,000 in the first ninethree months
of fiscal 2000.2001. We anticipate total amortization of approximately $113,000$6,000 in
fiscal 2001.2002.
Liquidity and Capital Resources
As of OctoberApril 29, 2000,2001, we had $694.9$627.3 million in cash and cash equivalents, an
increasea
decrease of $633.3$47.0 million from the end of fiscal 2000.2001. We historically have
held our cash balances in cash equivalents such as money market funds or as
cash. We place the money market funds with high-quality financial institutions
and limit the amount of exposure with any one financial institution. We had
$139.2$70.7 million of noncancelablenon-cancelable manufacturing commitments outstanding at OctoberApril
29, 2000.
In July 1999, we entered into an amended loan and security agreement with a
bank, which included a $10.0 million revolving loan agreement. The agreement
expired on July 29, 2000.2001.
Operating activities generated cash of $52.5$35.7 million during the first
nine
monthsquarter of fiscal 20012002 and generated cash of $10.6 million during the first nine
monthsquarter of fiscal 2000.2001.
The increase from the first nine monthsquarter of fiscal 20002001 to the same period ofin fiscal
20012002 was due to a substantial increase in net income, offset by changes in
operating assets and liabilities. Income tax benefit derived from the
difference between the exercise price and the fair value of acquired stock in
association with employees' exercise of stock options totaled $53.4 million for the first nine months of fiscal 2001 compared to $1.9$15.2 million in
the first nine monthsquarter of fiscal 2000.2002 compared to $14.0 million in the same period
of fiscal 2001. Our accounts receivable are highly concentrated. As of OctoberAt April 29,
2000, our four2001, the three largest customers accounted for approximately 46%52% of our accounts
receivable. During the second quarter of
fiscal 2001,Although we recorded ahave not experienced any significant bad debt provision of $2.0 million relatedwrite-
offs to one
customer that filed for bankruptcy. Significantdate, we may be required to write off bad debt write-offs in the future, which
could harm our business.
To date, our investing activities have consisted primarily of acquisition of
businesses and purchases of property and equipment.equipment and leasehold improvements
for our new facility under construction. We incurred $21.7acquisition costs of $63.6
million induring the first quarter of fiscal 2002, primarily due to the closing
of 3dfx asset purchase. There were no business purchases during the same period
a year ago. Our capital expenditures in the
first nine months of fiscal 2001, including $10 million attributable to a
software license agreement with an electronic design automation supplier. This
compared to capital expenditures of $9.9increased from $7.5 million in the first
nine monthsquarter of fiscal 20002001 to $31.7 million in the first quarter of fiscal 2002.
The increase was primarily attributable to the construction of our new facility
as well as for purchases of computer and emulation equipment to support
increased research and development activities and enterprise resource planning
system implementation. We expect capital expenditures to increase as we further
expand research and development initiatives and as our employee base grows. The
timing and amount of future capital expenditures will depend primarily on our
future growth. We expect to spend approximately $30.0$60.0 million to $40.0$70.0 million
for capital expenditures in fiscal 2001,2002, primarily for software licenses,
emulation equipment, purchase of computer and engineering workstations, future
phases of enterprise resource planning system implementation and tenant and
leasehold improvements in our new headquarters facility.
In April 2000, we entered into leases for our new headquarters complex in
Santa Clara, California. Our new complex will comprisecomprised of four buildings,
representing approximately 500,000 total square feet. We expect theThe first phase of two
buildings consisting of approximately 250,000 square feet to bewas completed in June
2001,2001. We expect the second phase of one building consisting of approximately
125,000 square feet to be completed in July 2001 and the last phase consisting
of approximately 125,000 square feet to be completed in March 2002. We have
$28.1 million of restricted cash related to the construction. The leases expire
in 2012 and include two seven-year renewals at our option. Future minimum lease
payments under these operating leases total approximately $240.0$227.1 million over
the terms of the leases. We currently are in the process of locating a
subtenant for our former office space and we also need to secure a subtenant
for one of the buildings that will comprise part of our new office complex. We
may be unable to secure subtenants for both spaces due to the recent decrease
in demand for commercial rental space in Santa Clara. See "Certain Business
Risks--We recently moved into new headquarters and we will have increased
operating expenses and write-offs if we are unable to sublease our former
office space and one building."
15
Financing activities provided cash of $602.5$16.2 million in the first nine monthsquarter of
fiscal 2001,2002 compared to $4.3$205.1 million in the first nine months of fiscal 2000.2001. On March 5, 2000, we
entered into an agreement with Microsoft in which we agreed to develop and sell
graphics chips and to license certain technology to Microsoft and its licensees
for use in a product under development by Microsoft. In April 2000, Microsoft
paidadvanced us $200.0 million as an advance against graphics chip purchases.
Microsoft may terminate the agreement at any time. If termination occurs prior
to offset in full of the advance payments, we would be required to return to
Microsoft up to $100.0 million of the prepayment and to convert the remainder
into shares of our preferred stock at a 30% premium to the 30-day average trading
price of our common stock preceding Microsoft's termination of the agreement.
15
In October 2000, we sold 1,400,000 shares of our common stock and $300 million
of Convertible Subordinated Notes due October 15, 2007 in a public offering.
Proceeds from the offering were approximately $387.4 million after deducting
underwriting discounts, commissions and offering expenses. Issuance costs
related to are being amortized to interest expense on a straight-line basis
over the term of the notes. Interest on the Convertible Subordinated Notes
accrues at the rate of four and three-quarter percent per annum and is payable
semiannually in arrears on April 15 and October 15 of each year, commencing
April 15, 2001. The Convertible Subordinated Notes are redeemable at our
option on and after October 20, 2003. The Notes are convertible at the option
of the holder at any time prior to the close of business on the maturity date,
unless previously redeemed or repurchased, into shares of common stock at a
conversion price of $92.71 per share, subject to adjustment in certain
circumstances.
We believe that our existing cash balances and anticipated cash flows from
operations will be sufficient to meet our operating and capital requirements
for at least the next 12 months. However, there is no assurance that we maywill
not need to raise additional equity or debt financing within this time frame.
Additional financing may not be available on favorable terms or at all and may
be dilutive to our then-current stockholders. We also may require additional
capital for other purposes not presently contemplated. If we are unable to
obtain sufficient capital, we could be required to curtail capital equipment
purchases or research and development expenditures, which could harm our
business.
ItemITEM 3. Quantitative and Qualitative Disclosures about Market RiskQUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Interest Rate Risk
The primary objective of our investment activities is to preserve principal
while at the same time maximizing the income we receive from the investments
without significantly increasing risk. To minimize potential loss arising from
adverse changes in interest rates, we maintain a portfolio of cash and cash
equivalents primarily in highly rated domestic money market funds. In general,
money market funds are not subject to market risk because the interest paid on
such funds fluctuates with the prevailing interest rate. Our convertible
subordinated notes are at a fixed interest rate of 4 3/4 % and are not subject
to interest rate fluctuations.
Exchange Rate Risk
We consider our exposure to foreign exchange rate fluctuations to be
minimal. Currently, all of oursales and arrangements with third-party manufacturers
provide for pricing and payment in U.S. dollars, and therefore are not subject
to exchange rate fluctuations. To date, we have not engaged in any currency
hedging activities, although we may do so in the future. Fluctuations in foreign
currency exchange rates could harm our business in the future.
Certain Business Risks
In addition to the risks discussed in "Management's Discussion and Analysis
of Financial Condition and Results of Operations," our business is subject to
the risks set forth below.
Our operating results are unpredictable and may fluctuate.
Many of our revenue components fluctuate and are difficult to predict, and
our operating expenses are largely independent of revenue in any particular
period. It is therefore difficult for us to accurately forecast revenue and
profits or losses. As a result, it is possible that in some quarters our
operating results could be below the expectations of securities analysts and
investors, which could cause the trading price of our common stock to decline,
perhaps substantially. We believe that our quarterly and annual results of
operations will be affected by a variety of factors that could adversely affect
our revenue, gross profit and results of operations.
Factors that have affected our results of operations in the past, and are
likely tocould
affect our results of operations in the future, include the following:
. demand and market acceptance for our products and/or our customers'
products;
16
. the successful development and volume production of next-generation
products;
16
. new product announcements or product introductions by our competitors;
. our ability to introduce new products in accordance with OEM, design
requirements and design cycles;
. changes in the timing of product orders due to unexpected delays in the
introduction of our customers' products;
. fluctuations in the availability of manufacturing capacity or
manufacturing yields;
. declines in spending by corporations and consumers related to perceptions
regarding an economic downturn in the U.S. and international regions;
. competitive pressures resulting in lower than expected average selling
prices;
. rates of product return in excess of that forecasted or expected due to quality
issues;
. the rescheduling or cancellation of customer orders;
. the loss of a key customer or the termination of a strategic
relationship;
. seasonal fluctuations associated with the PC market;
. substantial disruption in our suppliers' operations, either as a result
of a natural disaster, equipment failure or other cause;
. supply constraints for and changes in the cost of the other components
incorporated into our customers' products, including memory devices;
. our ability to reduce the manufacturing costs of our products;
. legal and other costs related to defending intellectual property;
. bad debt write-offs;
. costs associated with the repair and replacement of defective products;
. unexpected inventory write-downs; and
. introductions of enabling technologies to keep pace with faster
generations of processors and controllers.
Any one or more of the factors discussed above could prevent us from
achieving our expected future revenue or net income.
Because most operating expenses are relatively fixed in the short term, we
may be unable to adjust spending sufficiently in a timely manner to compensate
for any unexpected sales shortfall. We may be required to reduce prices in
response to competition or to pursue new market opportunities. If new
competitors, technological advances by existing competitors or other
competitive factors require us to invest significantly greater resources than
anticipated in research and development or sales and marketing efforts, our
business could suffer. Accordingly, we believe that period-to-period
comparisons of our results of operations should not be relied upon as an
indication of future performance. In addition, the results of any quarterly
period are not indicative of results to be expected for a full fiscal year.
Our 3D graphics solution may not continue to be accepted by the PC market.
Our success will depend in part upon continued broad adoption of our 3D
graphics processors for high performance 3D graphics in PC applications. The
market for 3D graphics processors has been characterized by unpredictable and
sometimes rapid shifts in the popularity of products, often caused by the
publication of competitive industry benchmark results, changes in dynamic
random memory devices pricing and other changes in the total system cost of
add-in boards, as well as by severe price competition and by frequent new
17
technology and product introductions. Only a small
17
number of products have
achieved broad market acceptance and such market acceptance, if achieved, is
difficult to sustain due to intense competition. Since we have no other product
line, our business would suffer if for any reason our current or future 3D
graphics processors do not continue to achieve widespread acceptance in the PC
market. If we are unable to complete the timely development of or successfully
and cost-effectively manufacture and deliver products that meet the
requirements of the PC market, our business would be harmed.
Our integrated graphics product may not be accepted by the PC market.
We expect that integrated graphics chipset products will become an
increasing part of the lower cost segment of the PC graphics market. We have only recently
introduced a 3D graphics processor targeted at this segment, as part of a joint
development effort with ALi.are
currently developing integrated chipset products. If this product isthese products are not
competitive in this segment and the integrated chipset segment continues to
account for an increasing percentage of the units sold in the PC market, our
business may suffer.
We need to develop new products and to manage product transitions in order to
succeed.
Our business will depend to a significant extent on our ability to
successfully develop new products for the 3D graphics market. Our add-in board
manufacturers and major OEM customers typically introduce new system
configurations as often as twice per year, typically based on spring and fall
design cycles. Accordingly, our existing products must have competitive
performance levels or we must timely introduce new products on a timely basis with such
performance characteristics in order to be included in new system
configurations. This requires that we do the following:
. anticipate the features and functionality that consumers will demand;
. incorporate those features and functionality into products that meet the
exacting design requirements of PC OEMs and add-in board manufacturers or
CEMs;
. price our products competitively; and
. introduce the products to the market within the limited window for PC
OEMs and add-in board manufacturers.
As a result, we believe that significant expenditures for research and
development will continue to be required in the future. The success of new
product introductions will depend on several factors, including the following:
. proper new product definition;
. timely completion and introduction of new product designs;
. the ability of Taiwan Semiconductor Manufacturing Co., or TSMC, our primary manufacturer, and any additional third-partythird-
party manufacturers to effectively manufacture our new products in a
timely manner;
. the quality of any new products;
. differentiation of new products from those of our competitors;
. market acceptance of our products and our customers' products; and
. availability of adequate quantity and configurations of various types of
memory products.
Our strategy is to utilize the most advanced semiconductor process
technology appropriate for our products and available from commercial third-partythird-
party foundries. Use of advanced processes has in the past resulted in initial
yield problems. New products that we introduce may not incorporate the features
and functionality demanded by PC OEMs, add-in board manufacturers and consumers
of 3D graphics. In addition, we may not successfully develop or introduce
18
new
products in sufficient volumes within the appropriate time to meet both the PC
OEMs' design cycles and market demand. We have in the past experienced delays
in the development of some new products. Our failure to successfully develop,
introduce or achieve market acceptance for new 3D graphics products would harm
our business.
18
Our failure to identify new product opportunities or to develop new products
could harm our business.
As markets for our 3D graphics processors develop and competition
increases, we anticipate that product life cycles at the high end will remain
short and average selling prices will continue to decline. In particular, we
expect average selling prices and gross margins for our 3D graphics processors
to decline as each product matures and as unit volume increases. As a result,
we will need to introduce new products and enhancements to existing products
to maintain overall average selling prices and gross margins. In order for our
3D graphics processors to achieve high volumes, leading PC OEMs and add-in
board manufacturers must select our 3D graphics processor for design into
their products, and then successfully complete the designs of their products
and sell them. We may be unable to successfully identify new product
opportunities or to develop and bring to market in a timely fashion any new
products. In addition, we cannot guarantee that any new products we develop
will be selected for design into PC OEMs' and add-in board manufacturers'
products, that any new designs will be successfully completed or that any new
products will be sold. As the complexity of our products and the manufacturing
process for products increases, there is an increasing risk that we will
experience problems with the performance of products and that there will be
delays in the development, introduction or volume shipment of our products. We
may experience difficulties related to the production of current or future
products or other factors may delay the introduction or volume sale of new
products we develop.developed. In addition, we may be unable to successfully manage
the production transition risks with respect to future products. Failure to
achieve any of the foregoing with respect to future products or product
enhancements could result in rapidly declining average selling prices, reduced
margins, and reduced demand for products or loss of market share. In addition,
technologies developed by others may render our 3D graphics products non-competitivenon-
competitive or obsolete or result in our holding excess inventory, either of
which would harm our business.
We rely on third-party vendors to supply us tools for the development of our
new products and we may be unable to obtain the tools necessary to develop
these products.
In the design and development of new products and product enhancements, we
rely on third-party software development tools. While we currently are not
dependent on any one vendor for the supply of these tools, some or all of
these tools may not be readily available in the future. For example, we have
experienced delays in the introduction of products in the past as a result of
the inability of then available software development tools to fully simulate
the complex features and functionalities of our products. The design
requirements necessary to meet consumer demands for more features and greater
functionality from 3D graphics products in the future may exceed the
capabilities of the software development tools available to us. If the
software development tools we use become unavailable or fail to produce
designs that meet consumer demands, our business could suffer.
Our industry is characterized by vigorous protection and pursuit of
intellectual property rights or positions that could result in substantial
costs to us.
The semiconductor industry is characterized by vigorous protection and
pursuit of intellectual property rights or positions, which has resulted in
protracted and expensive litigation. The 3D graphics market in particular has
been characterized recently by the aggressive pursuit of intellectual property
positions, and we expect our competitors to continue to pursue aggressive
intellectual property positions. In addition, from time to time we receive
notices alleging that we have infringed patents or other intellectual property
rights owned by third parties. We expect that, as the number of issued
hardware and software patents increases, and as competition in our markets
intensifies, the volume of intellectual property infringement claims will
increase. If infringement claims are made against us, we may seek licenses
under the claimant'sclaimants' patents or other intellectual property rights. However,
licenses may not be offered at all or on terms acceptable to us. The failure
to obtain a license from a third party for technology used by us could cause
us to incur substantial liabilities and to suspend the manufacture of
products. Furthermore, we may initiate claims or litigation against third
parties for infringement of our proprietary rights or to establish the
validity of our proprietary rights. We have agreed to indemnify certain
customers for claims of infringement arising out of sale of our products.
19
Litigation by or against us or our customers concerning infringement would
likely result in significant expense to us and divert the efforts of our
technical and management personnel, whether or not the litigation results in a
favorable determination for us.
We are subject to a patent infringement lawsuit and could be subject to future
lawsuits that could divert our resources and result in the payment of
substantial damages.
On September 21, 1998, 3Dfx Interactive, Inc. filed a patent infringement suit
against us in the United States District Court for the Northern District of
California alleging infringement of a 3Dfx patent. On March 2, 1999, 3Dfx added
a second patent to the suit and on May 24, 1999, 3Dfx added a third patent to
the suit. The amended complaint alleges that our RIVA TNT, RIVA TNT2 and RIVA
TNT2 Ultra products infringe the patents in suit and seeks unspecified
compensatory and trebled damages and attorneys' fees. Our current generation of
products is not identified as infringing any of the patents in suit. We have
filed an answer and counter-claims asserting that the patents in suit are
invalid and not infringed. These assertions are supported by our investigations
to date and an opinion from our patent counsel in this suit. The District Court
has ruled on claims construction issues and this matter is set for trial on May
22, 2001. We have and will continue to defend vigorously this suit. The
litigation with 3Dfx has resulted, and we expect that the 3Dfx litigation will
continue to result, in significant legal expenses, whether or not the litigation
results in a favorable determination for us. In the event of an adverse result
in the 3Dfx suit, we might be required to do one or more of the following:
. pay substantial damages (including treble damages);
. permanently cease the manufacture and sale of any of the infringing products;
. expend significant resources to develop non-infringing products; or
. obtain a license from 3Dfx for infringing products.
On August 28, 2000, we filed a patent infringement lawsuit against 3Dfx in the
United States District Court for the Northern District of California. The
lawsuit alleges that 3Dfx's graphics chip and card products, which are used to
accelerate 3D graphics on personal computers, infringe five of our patents and
seeks an injunction restraining 3Dfx from manufacturing, selling or importing
infringing graphics chip and card products including its Voodoo 3, Voodoo 4,
Voodoo 5 and VSA-100 family of products, as well as monetary damages. The matter
is in its earliest stages, discovery has not yet begun and no trial date has
been set.
We have in the past been subject to patent infringement suits, with SGI and S3
Incorporated, both of which were settled and resulted in cross-licenses and, in
the case of SGI, payments by us. In addition, we may be
subject to patent infringement suits brought by other parties in the future.
For example, we have been advised by Rambus Inc. that it believes our products
infringe certain patents owned by Rambus, and requestingRambus has requested that we
agree to certain licensing terms, including royalty payments. We believe the Rambusthat
Rambus' patents are invalid, not infringed by us and unenforceable. Although we currently are having discussions with
Rambus regarding potential business alternatives to Rambus' proposed licensing
terms, weWe cannot
guarantee that we will be able to reach a satisfactory agreement with Rambus.
If we are unable to do so, Rambus may sue us and/or our customers for patent
infringement at any time.
We could be subject to future lawsuits that could divert our resources and
result in the payment of substantial damages.
We may be unable to adequately protect our intellectual property.
We rely primarily on a combination of patents, trademarks, copyrights, trade secrets,
employee and third-party nondisclosure agreements and licensing arrangements to
protect our intellectual property. We own 33As of June 4, 2001, we owned 55 issued
United States patents, and have 5594 United States patent applications pending. Ourpending
and our issued patents havehad expiration dates from April 2015 to April 2018. OurDecember 2019.
As of June 4, 2001, our issued patents and pending patent applications relaterelated
to technology developed by us in connection with the development of our
products, including our 3D graphics processors. Our pending patent applications
and any future applications may not be approved. In addition, any issued
patents may not provide us with competitive advantages or 20
may be challenged by
third parties. The enforcement of patents ofby others may harm our ability to
conduct our business. Others may independently develop substantially equivalent
intellectual property or otherwise gain access to our trade secrets or
intellectual property, or disclose our intellectual property or
trade secrets.property. Our failure to effectively protect our intellectual
property could harm our business. We have licensed technology from third
parties for incorporation in our graphics processors, and expect to continue to
enter into license agreements for future products. These licenses may result in
royalty payments to third parties, the cross-licensecross-licensing of technology by us or
payment of other consideration. If these arrangements are not concluded on
commercially reasonable terms, our business could suffer.
Our failure to achieve one or more design wins would harm our business.
Our future success will depend in large part on achieving design wins, which
entails having our existing and future products chosen as the 3D graphics
processors for hardware components or subassemblies designed by PC OEMs and
motherboard and add-in board manufacturers. Our add-in board manufacturers and major OEM
customers typically introduce new high-end system configurations as often as twice per
year, generally based on spring and fall design cycles. Accordingly, our
existing products must have competitive performance levels or we must timely
introduce new products with such performance characteristics in order to be
included in new system configurations. Our failure to achieve one or more
design wins would harm our business. The process of being qualified for
inclusion in a PC OEM's product can be lengthy and could cause us to miss a
cycle in the demand of end users for a particular product feature, which also
could harm our business.
Our ability to achieve design wins also depends in part on our ability to
identify and ensure compliance with evolving industry standards. Unanticipated
changes in industry standards could render our products incompatible with
products developed by major hardware manufacturers and software developers,
including Intel and Microsoft. This would require us to invest significant time
and resources to redesign our products to ensure compliance with relevant
standards. If our products are not in compliance with prevailing industry
standards for a significant period of time, our ability to achieve design wins
could suffer.
20
We are dependent on the PC market, which may not continue to grow.
In fiscal 2000, we derived all of our revenue from the sale of products for
use in PCs. InDuring the first three quartersmonths of fiscal 2001,2002, we derived most of our
revenue from the sale of products for use in the entire desktop PC market,
from professional workstations to low-cost PCs. We expect to continue to
derive substantially most of our revenue from the sale or license of products
for use in PCsthe entire desktop PC market in the next several years. The PC
market is characterized by rapidly changing technology, evolving industry
standards, frequent new product introductions and significant price
competition. These factors result in short product life cycles and regular
reductions of average selling prices over the life of a specific product.
Although the PC market has grown substantially in recent years, this growth
may not continue. A reduction in sales of PCs, or a reduction in the growth
rate of PC sales, would likely reduce demand for our products. Moreover,
changes in demand could be large and sudden. Since PC manufacturers often
build inventories during periods of anticipated growth, they may be left with
excess inventories if growth slows or if they have incorrectly forecast
product transitions. In these cases, PC manufacturers may abruptly suspend
substantially all purchases of additional inventory from suppliers like us
until the excess inventory has been absorbed. It is possible that the recent
slowing of the economy in the U.S. and international regions, which has
negatively impacted some PC manufacturers and led to some reductions in the
demand for PCs, could lead to reductions in inventory purchases by PC
manufacturers. Any reduction in the demand for PCs generally, or for a
particular product that incorporates our 3D graphic processors, could harm our
business.
The acceptance of next generation products in business PC 3D graphics may not
continue to develop.
Our success will depend in part upon the demand for performance 3D graphics
for business PC applications. The market for performance 3D graphics on
business PCs has only recently begun to emerge and is dependent on the future
development of, and substantial end-user and OEM demand for, 3D graphics
functionality. As a result, the market for business PC 3D graphics computing
may not continue to develop or may not grow at a rate sufficient to support
our business. The development of the market for performance 3D graphics on
business PCs will in turn depend on the development and availability of a
large number of business PC software applications that support or take
advantage of performance 3D graphics capabilities. Currently there are only a
limited number of software applications like this, most of which are games,
and a broader base of software applications may not develop in the near term
or at all. 21
Consequently, a broad market for full function performance 3D
graphics on business PCs may not develop. Our business prospects will suffer
if the market for business PC 3D graphics fails to develop or develops more
slowly than expected.
We are dependent on a small number of customers and we are subject to order
and shipment uncertainties.
We have only a limited number of customers and our sales are highly
concentrated. We primarily sell our products to add-in board and motherboard
manufacturers and CEMs, which incorporate graphics products in the boards they
sell to PC OEMs. Sales to add-in board manufacturers and CEMs are primarily
dependent on achieving design wins with leading PC OEMs. The number of add-in
board manufacturers, and CEMs and leading PC OEMs is limited. We expect that a
small number of add-in board manufacturers and CEMs directly, and a small
number of PC OEMs indirectly, will continue to account for a substantial
portion of our revenue for the foreseeable future. As a result, our business
could be harmed by the loss of business from PC OEMs or add-in board
manufacturers and CEMs. In addition, revenue from add-in board manufacturers,
motherboard manufacturers, CEMs and PC OEMs that have directly or indirectly
accounted for significant revenue in past periods, individually or as a group,
may not continue, or may not reach or exceed historical levels in any future
period.
Our business may be harmed by instability in Asia due to the concentration
of customers who are located or have substantial operations in Asia, including
Taiwan. The People's Republic of China and Taiwan have in the past experienced
and currently are experiencing strained relations. A worsening of these
relations or the development of hostilities between the two could result in
disruptions in Taiwan and possibly other areas of Asia, which could harm our
business. In addition, it is possible that recent foreign relations matters
between the U.S. and The People's Republic of China could further strain
relations in Asia. While we believe political
21
instability in Asia has not adversely affected our business, because of our
reliance on companies with operations in Asia, continued economic and political
instability in Asia might harm us.it.
We may be unable to manage our growth and, as a result, may be unable to
successfully implement our strategy.
Our rapid growth has placed, and is expected to continue to place, a
significant strain on our managerial, operational and financial resources. As
of OctoberApril 29, 2000,2001, we had 618814 employees as compared to 392796 employees as of
January 30, 2000.28, 2001. We expect that the number of our employees will increase
substantially over the next 12 months. Our future growth, if any, will depend
on our ability to continue to implement and improve operational, financial and
management information and control systems on a timely basis, as well as our
ability to maintain effective cost controls. Further, we will be required to
manage multiple relationships with various customers and other third parties.
Our systems, procedures or controls may not be adequate to support our
operations and our management may be unable to achieve the rapid execution
necessary to successfully implement our strategy.
We are dependent on key personnel and the loss of these employees could harm
our business.
Our performance will be substantially dependent on the performance of our
executive officers and key employees. None of our officers or employees is
bound by an employment agreement, and our relationships with these officers and
employees are, therefore, at will. We do not have "key person" life insurance
policies on any of our employees. The loss of the services of any of our
executive officers, technical personnel or other key employees, particularly
Jen-Hsun Huang, our President and Chief Executive Officer, would harm our
business. Our success will depend on our ability to identify, hire, train and
retain highly qualified technical and managerial personnel. Our failure to
attract and retain the necessary technical and managerial personnel would harm
our business.
We depend on third-party fabricationfabrications to produce our products.
We do not manufacture the semiconductor wafers used for our products and do
not own or operate a wafer fabrication facility. Our products require wafers
manufactured with state-of-the-art fabrication equipment and techniques. We
utilize TSMC and WaferTech to produce our semiconductor wafers and utilize independent
contractors to perform assembly, test and packaging. We depend on these
suppliers to allocate to us a portion of their manufacturing capacity
sufficient to meet our needs, to produce products of acceptable quality and at
acceptable manufacturing yields, and to 22
deliver those products to us on a
timely basis. These manufacturers may be unable to meet our near-term or long-termlong-
term manufacturing requirements. We obtain manufacturing services on a purchase
order basis and TSMC has no obligation to provide us with any specified minimum
quantities of product. TSMC fabricates wafers for other companies, including
certain of our competitors, and could choose to prioritize capacity for other
users or reduce or eliminate deliveries to us on short notice. Because the lead
time needed to establish a strategic relationship with a new manufacturing
partner could be several quarters, there is no readily available alternative
source of supply for any specific product. We believe that long-term market
acceptance for our products will depend on reliable relationships with TSMC and
any other manufacturers used by us to ensure adequate product supply to respond
to customer demand.
In September 1999, a significantthe earthquake in Taiwan contributed to a temporary
shortage of graphics processors in the third and fourth quarters of fiscal
2000. Because of our reliance on TSMC, our business may be harmed by political
instability in Taiwan, including the worsening of the strained relations
between The People's Republic of China and Taiwan.Taiwan, and if relations between the
U.S. and The People's Republic of China are strained due to recent foreign
relations events. Furthermore, any substantial disruption in our suppliers'
operations, either as a result of a natural disaster, political unrest,
economic instability, equipment failure or other cause, could harm our
business.
22
We are dependent primarily on TSMC and we expect in the future to continue
to be dependent upon third-party manufacturers to do the following:
. produce wafers of acceptable quality and with acceptable manufacturing
yields;
. deliver those wafers to us and our independent assembly and testing
subcontractors on a timely basis; and
. allocate to us a portion of their manufacturing capacity sufficient to
meet our needs.
Our wafer requirements represent a significant portion of the total
production capacity of TSMC. Although our products are designed using TSMC's
process design rules, TSMC may be unable to achieve or maintain acceptable
yields or deliver sufficient quantities of wafers on a timely basis and/or at
an acceptable cost. Additionally, TSMC may not continue to devote resources to
the production of our products, or to advance the process design technologies
on which the manufacturing of our products isare based. Any difficulties like
these would harm our business.
Failure to achieve expected manufacturing yields would reduce our product
supply and harm our business.
Semiconductor manufacturing yields are a function both of product design,
which is developed largely by us, and process technology, which typically is
proprietary to the manufacturer. Since low yields may result from either
design or process technology failures, yield problems may not be effectively
determined or resolved until an actual product exists that can be analyzed and
tested to identify process sensitivities relating to the design rules that are
used. As a result, yield problems may not be identified until well into the
production process, and resolution of yield problems would require cooperation
by and communication between us and the manufacturer and us.manufacturer.
The risk of low yields is compounded by the offshore location of most of
our manufacturers, increasing the effort and time required to identify,
communicate and resolve manufacturing yield problems. Because of our
potentially limited access to wafer fabrication capacity from our
manufacturers, any decrease in manufacturing yields could result in an
increase in our per unit costs and force us to allocate our available product
supply among our customers. This could potentially harm customer relationships
as well as revenue and gross profit. Our wafer manufacturers may be unable to
achieve or maintain acceptable manufacturing yields in the future. Our
inability to achieve planned yields from our wafer manufacturers could harm
our business. We also face the risk of product recalls or product returns
resulting from design or manufacturing defects that are not discovered during
the manufacturing and testing process. In the event of a significant number of
product returns due to a defect or recall, our business could suffer.
Failure to transition to new manufacturing process technologies could affect
our ability to compete effectively.
Our strategy is to utilize the most advanced semiconductor process technology appropriate
for our products and available from commercial third-party foundries. Use of
advanced processes may have greater risk of initial yield
23
problems.
Manufacturing process technologies are subject to rapid change and require
significant expenditures for research and development. We continuously
evaluate the benefits of migrating to smaller geometry process technologies in
order to improve performance and reduce costs. We have migrated to the .18.15
micron technology with the GeForce2 GTS GPUs,GeForce3 family of graphics processors, and we
believe that the transition of our products to increasingly smaller geometries
will be important to our competitive position. Other companies in the industry
have experienced difficulty in migrating to new manufacturing processes and,
consequently, have suffered reduced yields, delays in product deliveries and
increased expense levels. We may experience similar difficulties and the
corresponding negative effects. Moreover, we are dependent on our
relationships with our third-party manufacturers to migrate to smaller
geometry processes successfully. We may be unable to migrate to new
manufacturing process technologies successfully or on a timely basis.
23
The 3D graphics industry is highly competitive and we may be unable to
compete.
The market for 3D graphics processors for PCs in which we compete is
intensely competitive and is characterized by rapid technological change,
evolving industry standards and declining average selling prices. We believe
that the principal competitive factors in this market are performance, breadth
of product offerings, access to customers and distribution channels, backward-forwardbackward-
forward software support, conformity to industry standard APIs, manufacturing
capabilities, price of graphics processors and total system costs of add-in
boards and motherboards. We expect competition to increase both from existing
competitors and new market entrants with products that may be less costly than
our 3D graphics processors or may provide better performance or additional
features not provided by our products. We may be unable to compete successfully
in the emerging PC graphics market.
Our primary source of competition is from companies that provide or intend
to provide 3D graphics solutions for the PC market. Our competitors include the
following:
. suppliers of graphics add-in boards that utilize their internally
developed graphics chips, such as ATI Technologies Inc. and Matrox
Electronics Systems Ltd.;
. suppliers of integrated core logic chipsets that incorporate 2D and 3D
graphics functionality as part of their existing solutions, such as
Intel, Silicon Integrated Systems and Via Technologies;Technologies, Inc.;
. suppliers of mobile graphics processors that incorporate 2D or 3D
graphics functionality as part of their existing solutions, such as ATI,
Trident Microsystems, Inc. and the joint venture of a division of
SONICblue Incorporated (formerly S3 Incorporated) and Via Technologies,
Inc.;
. companies that have traditionally focused on the professional market and
provide high end 3D solutions for PCs and workstations, including 3DLabs Inc.,3Dlabs,
SGI and Evans and Sutherland Computer Corporation;SONICblue; and
. companies that focus on the video game market, such as 3DfxImagination
Technologies and VideoLogic
Group plc.ST Microelectronics.
If and to the extent we offer products outside of the 3D graphics processor
market, we may face competition from some of our existing competitors as well
as from companies with which we currently do not compete. We cannot accurately
predict if we will compete successfully in any new markets we may enter.
We may compete with Intel in the integrated low-cost chipset market.
In June 2000, Intel began shipping the Intel 815 and 815e, 3D graphics
chipsetschipset that areis targeted at the low-cost PC market. Intel has significantly
greater resources than we do, and our products may not compete effectively
against future products introduced by Intel. In addition, we may be unable to
compete effectively against Intel or Intel may introduce additional products
that are competitive with our products in either performance or price or both.
We expect Intel to continue to do the following:
. invest heavily in research and development and new manufacturing
facilities;
. maintain its position as the largest manufacturer of PC microprocessors;
. increasingly dominate the PC platform; and
24
. promote its product offerings through advertising campaigns designed to
engender brand loyalty among PC users.
Intel may in the future develop graphics add-in cards or graphics-enabled
motherboards that could directly compete with graphics add-in cards or
graphics-
enabledgraphics-enabled motherboards based onthat our product.customers may develop. In addition, due
to the widespread industry acceptance of Intel's microprocessor architecture
and interface architecture, including its accelerated graphics port, or AGP,
and Intel's intellectual property position with respect to such architecture,
Intel exercises significant influence over the PC industry generally. Any
significant
24
modifications by Intel to the AGP, the microprocessor or core logic components
or other aspects of the PC microprocessor architecture could result in
incompatibility with our technology, which would harm our business. In
addition, any delay in the public release of information relating to
modifications like this could harm our business.
We are dependent on third parties for assembly and testing of our products.
Our graphics processors are assembled and tested by Advance Semiconductor
Engineering, Inc., ChipPAC Incorporated and Siliconware Precision
Industries Company Ltd., all of which are based in Asia. Because we rely on Asian assemblyChipPAC Incorporated and test subcontractors, our business may be harmed by political instability in
Asia, including the worsening of the strained relations between The People's
Republic of China and Taiwan.Advanced Semiconductor
Engineering. We do not have long-term agreements with any of these
subcontractors. As a result of our dependence on third-party subcontractors for
assembly and testing of our products, we do not directly control product
delivery schedules or product quality. Any product shortages or quality
assurance problems could increase the costs of manufacture, assembly or testing
of our products and could harm our business. Due to the amount of time
typically required to qualify assemblers and testers, we could experience
significant delays in the shipment of our products if we are required to find
alternative third parties to assemble or test our products or components. Any
delays in delivery of our products could harm our business.
We are subject to risks associated with product defects and incompatibilities.
Products as complex as oursthose offered by us may contain defects or failures
when introduced or when new versions or enhancements to existing products are
released. We have in the past discovered software defects and incompatibilities
with customers' hardware in certain of our products and may experience delays
or lost revenue to correct any new defects in the future. Errors in new
products or releases after commencement of commercial shipments could result in
loss of market share or failure to achieve market acceptance. Our products
typically go through only one verification cycle prior to beginning volume
production and distribution. As a result, our products may contain defects or
flaws that are undetected prior to volume production and distribution. If these
defects or flaws exist and are not detected prior to volume production and
distribution, we may be required to reimburse customers for costs to repair or
replace the affected products in the field. These costs could be significant
and could adversely affect our business and operating results. The widespread production
and distribution of defective products could harm our business.
We may not be successful in producing the processors in volumes required for
the Microsoft Xbox product and, even if we do successfully produce these
processors in the volumes required, we may not achieve profit margins
consistent with those of our other products.
The Xbox Graphics Processing Unit and Xbox Media Communications Processor
are new, complicated processors that have not been produced in volume. Both
processors have increased in complexity and features from what was contemplated
at the time we entered into the agreement with Microsoft. There can be no
assurance that we will be able to produce these processors in the volume and
within the required time frames or that we will be able to produce these
processors consistent with profit margins achieved on our other products.
Finally, there can be no assurance that the Xbox program will be commercially
successful. If any of the aforementioned risks occur, our business may suffer
and our stock price may decline.
We recently moved into new headquarters and we will have increased operating
expenses and write-offs if we are unable to sublease our former office space
and one building.
We moved into new headquarters at the end of May 2001 but we are still
obligated to pay rent on our previous office space. We currently are in the
process of locating a subtenant for our former office space and we also need to
secure a subtenant for one of the buildings that will comprise part of our new
office complex. We may be unable to secure subtenants for both spaces due to
the recent decrease in demand for commercial rental space in Santa Clara,
California. If we are unable to secure subtenants or if the rental values in
Santa Clara, California, decrease such that even if we found subtenants we
would still be obligated to pay a portion of the rent at both locations, our
operating expenses will increase, perhaps substantially, which will have a
25
negative impact on our net income. In addition, if we do not enter into a
sublease for our former office space, we will have to write-off unutilized
leasehold improvements associated with that space, which will adversely affect
our net income.
We are subject to risks associated with international operations.
Our reliance on foreign third-party manufacturing, assembly and testing
operations subjects us to a number of risks associated with conducting
business outside of the United States, including the following:
. unexpected changes in, or impositions of, legislative or regulatory
requirements;
. delays resulting from difficulty in obtaining export licenses for certain
technology, tariffs, quotas and other trade barriers and restrictions;
. longer payment cycles;
. imposition of additional taxes and penalties;
. the burdens of complying with a variety of foreign laws; and
. other factors beyond our control.
25
We also are subject to general political risks in connection with our
international trade relationships. In addition, the laws of certain foreign
countries in which our products are or may be manufactured or sold, including
various countries in Asia, may not protect our products or intellectual
property rights to the same extent as do the laws of the United States. This
makes the possibility of piracy of our technology and products more likely.
Currently, all of our arrangements with third-party manufacturers provide for
pricing and payment in U.S. dollars, and to date we have not engaged in any
currency hedging activities, although we may do so in the future. Fluctuations
in currency exchange rates could harm our business in the future.
The semiconductor industry is cyclical in nature.
The semiconductor industry historically has been characterized by the
following factors:
. rapid technological change;
. cyclical market patterns;
. significant average selling price erosion;
. fluctuating inventory levels;
. alternating periods of overcapacity and capacity constraints; and
. variations in manufacturing costs and yields and significant expenditures
for capital equipment and product development.
In addition, the industry has experienced significant economic downturns at
various times, characterized by diminished product demand and accelerated
erosion of average selling prices. We may experience substantial period-to-
period fluctuations in results of operations due to general semiconductor
industry conditions.
Failure in implementation of our enterprise resource planning system could
adversely affect our operations.
In December 1999, we began the implementation of an SAP A.G. system as our
enterprise resource planning or ERP system to replace our information systems
in business, finance, operations and service. The first phase of the
implementation was successfully completed in June 2000 and our operations are
fully functioning under the new ERP system. Future phases of the
implementation are expected to occur throughout fiscal 2001 and fiscal 2002. We are heavily
dependent upon the proper functioning of our internal systems to conduct our
26
business. System failure or malfunctioning may result in disruptions of
operations and inability to process transactions. Our results of operations and
financial position could be adversely affected if we encounter unforeseen
problems with respect to system operations or future implementation.
Some provisions in our certificate of incorporation, our bylaws and our
agreement with Microsoft could delay or prevent a change in control.
Our certificate of incorporation and bylaws contain provisions that could
make it more difficult for a third party to acquire a majority of our
outstanding voting stock. These provisions include the following:
. the ability of the board of directors to create and issue preferred stock
without prior stockholdershareholder approval;
. the prohibition of stockholdershareholder action by written consent;
. a classified board of directors; and
. advance notice requirements for director nominations and stockholdershareholder
proposals.
26
On March 5, 2000, we entered into a licensing and development agreement with
Microsoft that included a grant to Microsoft of first and last rights of
refusal over any offer we receive to purchase 30% or more of the outstanding
shares of our common stock. ThisThe provision could also delay or prevent a change
in control of NVIDIA.
Weour company.
Rising energy costs and power system shortages in California may result in
increased operating expenses and reduced net income.
California is currently experiencing an energy crisis and has recently
experienced significant power shortages. As a result, energy costs in
California, including natural gas and electricity, may rise significantly over
the next year. Because our principal operating facilities are subjectlocated in
California, our operating expenses may increase significantly if this trend
continues. In addition, California has on some occasions implemented, and may
in the future continue to risks associated with interest rateimplement, rolling blackouts throughout the state,
including the county where we have our principal offices. If blackouts
interrupt our power supply, we may be temporarily unable to operate and foreign exchange
rate fluctuation.any
such interruption could harm our business.
Our stock price may continue to experience large short-term fluctuations.
The primary objectiveprice of our common stock has fluctuated greatly. These price
fluctuations have been rapid and severe. The price of our common stock may
continue to fluctuate greatly in the future due to factors, such as the recent
decline in some economic indicators in the U.S., related to the general
volatility that currently exists in the market or due to a variety of company
specific factors, including quarter to quarter variations in our operating
results, shortfalls in revenue or earnings from levels expected by securities
analysts and the other factors discussed above in these risk factors. In the
past, following periods of volatility in the market price of a company's stock,
securities class action litigation has been initiated against the issuing
company. This type of litigation could result in substantial cost and a
diversion of management's attention and resources, which could have an adverse
effect on our revenues and earnings. Any adverse determination in this type of
litigation could also subject us to significant liabilities. See "Risk
Factors--Our operating results are unpredictable and may fluctuate."
We may not be able to realize the potential financial or strategic benefits of
future business acquisitions which could hurt our ability to grow our business
and sell our products.
In the future we may acquire or invest in other businesses that offer
products, services and technologies that we believe would help expand or
enhance our products and services or help expand our distribution
27
channels. If we were to make such an acquisition or investment, activities isthe following
risks could impair our ability to preserve principal
while atgrow our business and develop new products
and, ultimately, could impair our ability to sell our products:
. difficulty in combining the same time maximizingtechnology, operations or work force of the
income we receive fromacquired business;
. disruption of our on-going businesses;
. difficulty in realizing the investments
without significantly increasing risk. To minimize potential loss arising from
adverse changesfinancial or strategic benefits of
the transaction;
. difficulty in interest rates, we maintainmaintaining uniform standards, controls, procedures and
policies; and
. possible impairment of relationships with employees and customers as a
portfolioresult of any integration of new businesses and management personnel.
In addition, the consideration for any future acquisition could be paid in
cash, shares of our common stock, or a combination of cash and cash
equivalents primarily in highly rated domestic money market funds. In general,
money market funds are not subject to market risk becausecommon stock. If
the interestconsideration is paid on
such funds fluctuates with the prevailing interest rate.
We consider our exposure to foreign exchange rate fluctuations tocommon stock, existing stockholders would be
minimal.
Currently, allfurther diluted. Any amortization of goodwill or other assets resulting from
any acquisition could materially adversely affect our arrangements with third-party manufacturers provide for
pricingoperating results and
payment in U.S. dollars, and therefore are not subject to exchange
rate fluctuations. To date, we have not engaged in any currency hedging
activities, although we may do so in the future. Fluctuations in foreign
currency exchange rates could harm our business in the future.
27financial condition.
28
PART II: OTHER INFORMATION
ItemITEM 1. Legal Proceedings
On September 21, 1998, 3Dfx filed a patent infringement lawsuit against us in
the United States District Court for the Northern District of California
alleging infringement of a 3Dfx patent. On March 2, 1999, 3Dfx added a second
patent to the suit and on May 24, 1999, 3Dfx added a third patent to the suit.
The amended complaint alleges that our RIVA TNT, RIVA TNT2 and RIVA TNT2 Ultra
products infringe the patents in suit and seeks unspecified compensatory and
trebled damages and attorney's fees. Our current generation of products is not
identified as infringing any of the patents in suit. We have filed an answer and
counter-claims asserting that the patents in suit are invalid and not infringed.
These assertions are supported by our investigations to date and an opinion from
our patent counsel in this suit. The District Court has issued its claim
construction ruling and the trial is scheduled to start on May 22, 2001.
On August 28, 2000, we filed a patent infringement lawsuit against 3Dfx in the
United States District Court for the Northern District of California. The
lawsuit alleges that 3Dfx's graphics chips and card products, which are used to
accelerate 3D graphics on personal computers, infringe five of our patents and
seeks an injunction restraining 3Dfx from manufacturing, selling, or importing
infringing graphics chips and card products, including its Voodoo3, Voodoo4,
Voodoo5 and VSA-100 family of products, as well as monetary damages.LEGAL PROCEEDINGS
On February 22, 2000, Graphiques Matrox, Inc. and Systemes Electroniques
Matrox Ltd. (collectively "Matrox") filed suit against us in the Superior
Court, Judicial District of Montreal, Province of Quebec, Canada. The suit
alleges that we improperly solicited and recruited Matrox'sMatrox employees and
encouraged Matrox'sMatrox employees to breach their Matrox confidentiality and/or non-competitionnon-
competition agreements. The suit by Matrox seeks, among other things, certain
injunctive relief. We believe that the claims asserted by Matrox are without
merit and we intend to vigorously defend this suit. The trial of this matter
is scheduled forstarted on April 4, 2001. On May 19, 2000, we filed suit against Matrox in Santa Clara County Superior
Court alleging that Matrox's efforts to prevent its currentApril 24, 2001, the trial ended and former employees
from pursuing employment opportunities with us constitute interference with
prospective economic advantage, interference with contract and unfair
competition. Our suit seeks, among other things, unspecified monetary damages, a
declaration that Matrox's confidentiality and/or non-competition agreements are
unenforceable under California law and a declaration that Matrox's use of those
agreements and other tactics constitutes unfair competition. On May 26, 2000,the court took
the case was transferred tounder submission. The court indicated that it would not likely issue a
final decision on the San Jose Division ofmerits for approximately two months.
On September 21, 1998, 3dfx Interactive, Inc. filed a patent infringement
lawsuit against us in the United States District Court for the Northern
District of California.California alleging infringement of a 3dfx patent. The lawsuit was
amended in 1999 to add two additional 3dfx patents. On June 14,August 28, 2000, Matroxwe
filed an
answer denyinga patent infringement lawsuit against 3dfx in the United States District
Court for the Northern District of California alleging infringement by 3dfx of
five of our claimspatents. The complaint by 3dfx alleged that our RIVA TNT, RIVA TNT2
and a counterclaim alleging trade secret
misappropriation, intentional interference with contractual relationsRIVA TNT Ultra products infringed the patents in suit and unfair
competition. Matrox's California suit seekssought
unspecified monetarycompensatory and trebled damages and attorney's fees, as well as
injunctive relief. WeOur current generation of products was not identified as
infringing any of the patents in suit. The lawsuit filed an answerby us against 3dfx
alleged that 3dfx's graphics chips and card products, which were used to
this counterclaimaccelerate 3D graphics on July 7, 2000,
denying all of Matrox's claims. As with the Montreal action, we believe that the
claims asserted by Matrox are without merit and we intend to vigorously defend
this suit.
Item 6. Exhibits and Reports on Form 8-K
(a) Exhibits
The following exhibits are filed herewith:
Exhibit
Number Description of Document
------- -----------------------
27.1 Financial Data Schedule
(b) Reports on Form 8-K
1. A Current Report on Form 8-K dated September 28, 2000 reporting under
Item 5 -other events was filed updating our Risk Factors and descriptionpersonal computers, infringed five of our Business.
28
2. A Current Report on Form 8-K dated October 5, 2000 reporting under Item 7 -
Financial Statements, Pro Forma Financial Informationpatents and
Exhibits wassought an injunction restraining 3dfx from manufacturing, selling, or importing
infringing graphics chips and card products, including its Voodoo3, Voodoo4,
Voodoo5 and VSA-100 family of products, as well as monetary damages. Following
the closing of the definitive agreement entered into by us, NVIDIA US
Investment and 3dfx, we and 3dfx jointly filed to includedismiss with prejudice the
following exhibits pertainingabove-described patent litigation between us. The lawsuit was dismissed on
April 26, 2001, pursuant to a judicial order.
Sunonwealth Electric Machine Industry Co., Ltd. filed a complaint against us
in the United States District Court for the Central District of California,
Case Number CV-01-00870 CBM (CTx), for infringement of US Patent Nos. 6,109,892
and 6,114,785. The other defendants are Creative Technology, Ltd., a Singapore
corporation and Creative Labs, Inc., a California corporation. A related case
is Sunonwealth v. Adda Corporation, et al, filed in the Unites States District
Court for the Central District on October 19, 2001, with case number 00-CV-
1041. The patents are for a positioning device for a sensor element of a
miniature fan. We purchase these fans from Adda. Adda has agreed to defend us
in this suit through the law firm of Mount & Stoelker of San Jose, California.
Adda shall pay all fees and costs incurred in connection with Mount &
Stoelker's representation of us and may control the defense and settlement of
the lawsuit. We may elect to have our secondary common stock offeringown counsel involved in the lawsuit, to
confer with Mount & Stoelker and $300 million convertible debt offering:
Exhibit No. Description
1.1 Formto otherwise review and keep us apprised of
Underwriting Agreement.
4.1 Formthe work performed by Mount & Stoelker. However, such separate counsel shall be
at our sole cost and expense. In the event that this lawsuit proceeds to
judgment based upon liability for infringement of Indenturethe patents in suit, Adda has
agreed to pay that judgment rendered against us. Also, Adda has agreed to pay
any settlement to the extent our liability in such settlement arises from
patent infringement resulting from our purchase of products from Adda.
In addition, we may be entered into between NVIDIAsubject to litigation in the future. See "Certain
Business Risks--Litigation by or against us or our customers concerning
infringement would likely result in significant expense to us and Chase Manhattan Bankdivert the
efforts of our technical and Trust Company, as Trustee.
4.2 Formmanagement personnel, whether or not the
litigation results in a favorable determination for us." From time to time, we
are also subject to claims in the ordinary course of Supplemental Indenture No. 1 to be entered into
between NVIDIA and Chase Manhattan Bank and Trust Company,
as Trustee.business, none of which in
our view would have a material adverse impact on our business or financial
position if resolved unfavorably.
29
SIGNATURE
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, the Registrant has duly caused this report to be signed
on its behalf by the undersigned, thereunto duly authorized, on December 8, 2000.June 12, 2001.
NVIDIA Corporation
By:
/s/ Christine B. Hoberg
--------------------------------------------By: _________________________________
Christine B. Hoberg
Chief Financial Officer
(Principal Financial and
Accounting Officer)
30
INDEX TO EXHIBITS
Exhibit
Number Description of Document
------- -----------------------
27.1 Financial Data Schedule
31