UNITED STATES
SECURITIES AND EXCHANGE COMMISSION 

Washington, D.C. 20549

FORM 20-F

OR

OR

OR

Commission file number: 001-16125

(Exact name of Registrant as specified in its charter)

Advanced Semiconductor Engineering, Inc.ASE Technology Holding Co., Ltd.

(Translation of Registrant’s Name into English)

REPUBLIC OF CHINA

(Jurisdiction of Incorporation or Organization)

26 Chin Third Road

Nantze Export Processing Zone

Nantze, Kaohsiung, Taiwan

Republic of China

(Address of Principal Executive Offices)

Joseph Tung

Room 1901, No. 333, Section 1 Keelung Rd.

Taipei, Taiwan, 110

Republic of China

Tel: 886-2-6636-5678

Fax: 882-2-2757-6121

Email:ir@aseglobal.com

 (Name, Telephone, Email and/or Facsimile number and Address of Company Contact Person)

Securities registered or to be registered pursuant to Section 12(b) of the Act:

*Traded in the form of American Depositary Receipts evidencing American Depositary Shares (the “ADSs”), each
representing fivetwo common shares of Advanced Semiconductor Engineering, Inc. ASE Technology Holding Co., Ltd. 

Securities registered or to be registered pursuant to Section 12(g) of the Act:

None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act:

None

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report:

7,944,875,3464,321,629,382 Common Shares, par value NT$10 each**

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes ☒         No ☐

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.

Yes ☐         No ☒

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.

Yes ☒         No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes ☐☒         No ☒☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer.filer, or an emerging growth company. See definition of “large accelerated filer,” “accelerated filer,” and large accelerated filer”l “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow:

Item 17 ☐         Item 18 ☐

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ☐         No ☒

** As a result of the exercise of employee stock options subsequent to December 31, 2016,2018, as of MarchJanuary 31, 2017,2019, we had 8,273,546,0464,322,321,982 shares outstanding.

table of contents

Page

USE OF CERTAIN TERMS

Unless the context otherwise requires, references in this annual report to:

We publish our financial statements in New Taiwan dollars, the lawful currency of the ROC.R.O.C. In this annual report, references to “United States dollars,” “U.S. dollars” and “US$” are to the currency of the United States; references to “New Taiwan dollars,” “NT dollars” and “NT$” are to the currency of the ROC;R.O.C.; references to “RMB” are to the currency of the PRC;P.R.C.; references to “JP¥” are to the currency of Japan; references to “MYR” are to the currency of Malaysia; references to “SGD” are to the currency of Republic of Singapore; references to “KRW” are to the currency of Republic of Korea; and references to “EUR” are to the currency of the European Union. Unless otherwise noted, all translations from NT dollars to U.S. dollars were made at the exchange rate as set forth in the H.10 weekly statistical release of the Federal Reserve System of the United States (the “Federal Reserve Board”) as of December 30, 2016,31, 2018, which was NT$32.40=30.61=US$1.00, and all translations from RMB to U.S. dollars were made at the exchange rate as set forth in the H.10 weekly statistical release of the Federal Reserve Board as of December 30, 2016,31, 2018, which was RMB6.9430=RMB6.8755=US$1.00. All amounts translated into U.S. dollars in this annual report are provided solely for your convenience and no representation is made that the NT dollar, RMB or U.S. dollar amounts referred to herein could have been or could be converted into U.S. dollars or NT dollars/RMB, as the case may be, at any particular rate or at all. On April 14, 2017,19, 2019, the exchange rate between NT dollars and U.S. dollars as set forth in the H.10 weekly statistical release by the Federal Reserve Board was NT$30.31=30.82=US$1.00. On April 14, 2017,19, 2019, the exchange rate between RMB and U.S. dollars as set forth in the H.10 weekly statistical release by the Federal Reserve Board was RMB6.8835 =US$RMB6.7032=US$1.00.

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This annual report on Form 20-F contains “forward-looking statements” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act. Although these forward-looking statements, which may include statements regarding our future results of operations, financial condition or business prospects, are based on our own information and information from other sources we believe to be reliable, you should not place undue reliance on these forward-looking statements, which apply only as of the date of this annual report. The words “anticipate,” “believe,” “estimate,” “expect,” “intend,” “plan” and similar expressions, as they relate to us, are intended to identify these forward-looking statements in this annual report. Our actual results of operations, financial condition or business prospects may differ materially from those expressed or implied in these forward-looking statements for a variety of reasons, including risks associated with cyclicality and market conditions in the semiconductor or electronics industry; changes in our regulatory environment, including our ability to comply with new or stricter environmental regulations and to resolve environmental liabilities; demand for the outsourced semiconductor packaging, testing and electronic manufacturing services we offer and for such outsourced services generally; the highly competitive semiconductor or manufacturing industry we are involved in; our ability to introduce new technologies in order to remain competitive; international business activities; our business strategy; our future expansion plans and capital expenditures; the uncertainties as to whether we can complete the share exchange contemplated by the Joint Share Exchange Agreement between us and SPIL; the strained relationship between the ROCR.O.C. and the PRC;P.R.C.; general economic and political conditions; the recent global economic crisis; possible disruptions in commercial activities caused by natural or human-induced disasters; fluctuations in foreign currency exchange rates; and other factors. For a discussion of these risks and other factors, see “Item 3. Key Information—Risk Factors.”

PART I

Item 1. Identity of Directors, Senior Management and Advisers

Not applicable.

Item 2. Offer Statistics and Expected Timetable

Not applicable.

Item 3. Key Information

SELECTED FINANCIAL DATA

The following tables present selected consolidated financial data for ASEH as of and for the year ended December 31, 2018, and ASE as of and for the years ended December 31, 2014, 2015, 2016 and 2017.

The selected consolidated statements of comprehensive income data and cash flow data for the years ended December 31, 2014, 20152016, 2017 and 2016,2018, and the selected consolidated balance sheet data as of December 31, 20152017 and 20162018 set forth below are derived from our audited consolidated financial statements included in this annual report and should be read in conjunction with, and are qualified in their entirety by reference to, these consolidated financial statements, including the notes thereto. The selected consolidated statements of comprehensive income data and cash flow data for the year ended December 31, 20122014 and 20132015 and the selected consolidated balance sheet data as of December 31, 20122014, 2015 and 20132016 set forth below are derived from our audited consolidated financial statements not included herein.

Our consolidated financial statements have been prepared and presented in accordance with IFRS. Until and including our consolidated financial statements included in our annual report on Form 20-F for the year ended December 31, 2012, we prepared our consolidated financial statements in accordance with ROC GAAP with reconciliations to U.S. GAAP.

We adopted IFRS for certain filings with the SEC, starting from the filing of our annual report on Form 20-F for the year ended December 31, 2013. Historical financial results as of and for the year ended December 31, 2012 included herein have been adjusted and presented in accordance with IFRS, which differs from the results included in our annual report on Form 20-F for the year ended December 31, 2012. Meanwhile, as required by the FSC, we adopted Taiwan-IFRS for reporting of our annual and interim consolidated financial statements in the ROC beginning on January 1, 2013. Taiwan-IFRS differs from IFRS in certain respects, including, but not limited to the extent that any new or amended standards or interpretations applicable under IFRS may not be timely endorsed by the FSC.

Following our adoption of IFRS for SEC filing purposes, pursuant to the rule amendments adopted by the SEC that became effective on March 4, 2008, we were no longer required to reconcile our consolidated financial statements with U.S. GAAP.

ASEH was formed pursuant to the consummation of the Share Exchange on April 30, 2018. ASE is ASEH’s predecessor entity; therefore, the financial and operational results of ASEH for periods before the Share Exchange were prepared under the assumption that ASEH owned 100% shareholdings of ASE. The related assets and liabilities in ASEH’s financial data, before the date of incorporation, was recognized based on the carrying amounts of those in ASE’s financial data. The financial data of ASEH for 2018 consists the results of:

Exchange Rates

Fluctuations in the exchange rate between NT dollars and U.S. dollars will affect the U.S. dollar equivalent of the NT dollar price of our common shares on the TWSE and, as a result, will likely affect the market price of the ADSs. Fluctuations will also affect the U.S. dollar conversion by the depositary under our ADS deposit agreement referred to below of cash dividends paid in NT dollars on, and the NT dollar proceeds received by the depositary from any sale of, common shares represented by ADSs, in each case, according to the terms of the deposit agreement dated September 29, 2000 and as amended and supplemented from time to time among us, Citibank N.A., as depositary, and the holders and beneficial owners from time to time of the ADSs, which we refer to as the deposit agreement.

The following table sets forth, for the periods indicated, information concerning the number of NT dollars for which one U.S. dollar could be exchanged. The exchange rates reflect the exchange rates set forth in the H.10 statistical release of the Federal Reserve Board.

On April 14, 2017, the exchange rate as set forth in the H.10 weekly statistical release by the Federal Reserve Board was NT$30.31=US$1.00.

CAPITALIZATION AND INDEBTEDNESS

Not applicable.

REASON FOR THE OFFER AND USE OF PROCEEDS

Not applicable.

RISK FACTORS

Risks Relating to the SPIL Acquisition

Due to the SPIL Acquisition, our financial and operational results for 2018 may not be comparable with prior periods

ASEH was formed pursuant to the consummation of the Share Exchange on April 30, 2018. ASE is ASEH’s predecessor entity; therefore, the financial and operational results of ASEH for periods before the Share Exchange were prepared under the assumption that ASEH owned 100% shareholdings of ASE. The financial and operational results before April 30, 2018 reflect the business operations of ASE prior to the establishment of ASEH. The financial and operational results for the second quarter of 2018 reflect the business operations of ASE starting from April 1, 2018 and the business operations of ASEH starting from April 30, 2018. The financial and operational results after April 30, 2018, including third quarter and fourth quarter of 2018, reflect the combined operations after the SPIL Acquisition. Therefore, the financial and operational results of these quarters may not be comparable and the consolidated financial information for periods after the SPIL Acquisition may not be comparable with the consolidated financial information for the prior periods. In addition, the audited consolidated financial statements for the year ended December 31, 2018 may not be comparable to that of the prior years.

There may be risks associated with our current holding company structure.

We entered into the Joint Share Exchange Agreement with SPIL in June 2016, pursuant to which ASEH, a holding company in Taiwan, holds 100% of the equity interests in both ASE and SPIL such that ASE and SPIL became wholly owned subsidiaries of ASEH. Other than the aforementioned change in corporate structure, ASE and SPIL maintained independent operations as each did before the consummation of the SPIL Acquisition. The common shares of ASE and SPIL were delisted from the TWSE. The ADSs of ASE and SPIL were delisted from NYSE and NASDAQ, respectively, and became eligible for deregistration under the Exchange Act. Subsequently, the common shares of ASEH were listed on the TWSE, and the ADSs of ASEH were listed on the NYSE. The implementation of such corporate structure restructuring plan may result in contingent risks, including increase in tax liabilities or trading discounts relating to a holding company discount that may become apparent in the future. For details about the Joint Share Exchange Agreement, see “Item 10. Additional Information—Material Contract.”

The SAMR Anti-Monopoly Bureau may ultimately take unfavorable actions against us even if we fully comply with the 24 months Hold-Separate conditions.

On November 24, 2017, we received approval from the Ministry of Commerce of the People’s Republic of China (“MOFCOM”) for the Share Exchange under the condition that ASE and SPIL maintain independent operations, among other conditions, for 24 months (“Hold-Separate conditions”). On April 10, 2018, the Anti-Monopoly Bureau under the newly-formed State Administration for Market Regulation (“SAMR”) assumed MOFCOM’s responsibility for antitrust enforcement and continues to monitor our compliance with relevant antitrust laws. While we abide by the Hold-Separate conditions, the Anti-Monopoly Bureau has the authority to and may further impose more restrictive conditions without advance notice.

In the event that the Hold-Separate conditions cannot be satisfied, we may re-evaluate our interest in SPIL and may consider, among other legally permissible alternatives, to dispose our SPIL shares at a loss, which may significantly affect our financial position. If we receive more restrictive antitrust related conditions from the Anti-Monopoly Bureau, we may face greater difficulties in successfully integrating SPIL into our existing organization or in realizing anticipated benefits and cost synergies afterwards. Each of these risks could have a material adverse effect on our business and operations, including our relationship with customers, suppliers, employees and other constituencies, or otherwise adversely affect our financial condition and results of operations.

Risks Relating to Our Business

Since we are dependent on the highly cyclical semiconductor and electronics industries and conditions in the markets for the end-use applications of our products, our revenues and net income may fluctuate significantly.

Our business is affected by market conditions in the highly cyclical semiconductor and electronics industries. Most of our customers operate in this industry, and variations in order levels from our customers and service fee rates may result in volatility in our revenues and net income. From time to time, the semiconductor and electronics industries have experienced significant, and sometimes prolonged, downturns. As our business is, and will continue to be, dependent on the requirements for independent packaging, testing and electronic manufacturing services, any future downturn in the industry would reduce demand for our services. For example, in the fourth quarter of 2008, the global economic crisis resulted in a significant deterioration in demand for our customers’ products, which in turn affected demand for our services and adversely affected our operating results. Although demand has recovered, we expect there to be continued downward pressure on our average selling prices and continued volatility with respect to our sales volumes in the future. If we cannot reduce our costs or adjust our product mix to sufficiently offset any decline in sales volumes, our profitability will suffer, and we may incur losses.

Market conditions in the semiconductor and electronics industries depend to a large degree on conditions in the markets for the end-use applications of various products, such as communications, computing and consumer electronics products. Any deterioration of conditions in the markets for the end-use applications would reduce demand for our services, and would likely have a material adverse effect on our financial condition and results of operations. In 2016,2018, approximately52.2% 49.9%,11.5% 14.0% and36.3% 36.1% of our operating revenues from packaging and testing were attributed to the packaging and testing of semiconductors used in communications, computing and consumer electronics/industrial/automotive/other applications, respectively. In the same year, approximately50.6% 35.7%,16.9% 14.2%,18.4% 34.3%,7.2% 10.0% and6.0% 5.8% of our operating revenues from electronic manufacturing services were attributed to the communications, computing,computers and storage, consumer electronics applications, industrial and automotive applications, respectively. Across end-use applications, our customers face intense competition and significant shifts in demand, which could put pricing pressure on our services and may adversely affect our revenues and net income.

A reversal or slowdown in the outsourcing trend for semiconductor packaging and testing services and electronic manufacturing services could adversely affect our growth prospects and profitability.

Semiconductor manufacturers that have their own in-house packaging and testing capabilities, known as integrated device manufacturers and original equipment manufacturers, have increasingly outsourced stages of the production process, including packaging, testing, electronic manufacturing and assembly, to independent companies in order to reduce costs, eliminate product complexity and meet fast-to-market requirements. In addition, the availability of advanced independent semiconductor manufacturing services has also enabled the growth of so-called “fabless” semiconductor companies that focus exclusively on design and marketing and outsource their manufacturing, packaging and testing requirements to independent companies. We cannot assure you that these manufacturers and companies will continue to outsource their packaging, testing and manufacturing requirements to third parties like us. Furthermore, during an economic downturn, these integrated device manufacturers typically rely more on their own in-house packaging and testing capabilities, therefore decreasing their need to outsource. A reversal of, or a slowdown in, this outsourcing trend could result in reduced demand for our services and adversely affect our growth prospects and profitability.

Any global economic downturn could adversely affect the demand for our products and services, and a protracted global economic crisis would have a material adverse effect on us.

The global financial markets experienced significant disruptions in 2008 and the United States, Europe and other economies went into recession. The recovery from the lows of 2008 and 2009 was uneven and it is facing new challenges, including a European sovereign debt crisis that began in 2011, a referendum in the United Kingdom in June 2016, in which the majority of voters voted in favor of an exit from the European Union (“Brexit”), and continuing high unemployment rates in much of the world. It is unclear what the long-term impact of the European sovereign debt crisis will be and uncertainty remains over the long-term effects of the expansionary monetary and fiscal policies that have been adopted by the central banks and financial authorities of some of the world’s leading economies. There are also increased uncertainty in the wake of Brexit, which has resulted in downgrade of the credit ratings of the United Kingdom and an increase in volatility in the global financial markets. Any economic downturn or crisis may cause our customers to do the following:

Any uncertainty or significant volatility in global economic conditions may also make it difficult for our customers to accurately forecast and plan future business activities and may have a material adverse effect on us.

If we are unable to compete favorably in the highly competitive markets of semiconductor packaging and testing and electronic manufacturing services, our revenues and net income may decrease.

The markets of semiconductor packaging and testing and electronic manufacturing services are very competitive. We face competition from a number of sources, including other independent semiconductor packaging and testing companies, integrated device manufacturers, and other electronic manufacturing services providers with large-scale manufacturing capabilities who can quickly react to market changes. We believe that the principal competitive factors in our industry are:

We face increasing competition, as most of our customers obtain services from more than one source. Rapid technological advances and aggressive pricing strategies by our competitors may continue to increase competition. Our ability to compete depends on factors both within and outside of our control and may be constrained by the distinct characteristics and production requirements of individual products. We cannot assure you that we will be able to continue to improve production efficiency and maintain reasonable profit for all of our products.

In addition, some of our competitors may have superior financial, marketing, manufacturing, research and development and technological resources than we do. For example, the central government of the PRCP.R.C. as well as provincial and municipal governments have provided various incentives to domestic companies in the semiconductor industry, including major semiconductor testing and packaging providers, such as Jiangsu Changjiang Electronics Technology Co., Ltd. Similarly, our customers may face competition from their competitors in the PRC,P.R.C., and such competitors may also receive significant subsidies from the PRCP.R.C. government. As we are downstream suppliers, the impact of such government policies on competition and price pressure of our customers may negatively impact our own business. Increasing competition may lead to declines in product prices and profitability and could have a material adverse effect on our business, financial condition, results of operations and future prospects.

Our profitability depends on our ability to respond to rapid technological changes in the semiconductor industry.

The semiconductor industry is characterized by rapid increases in the diversity and complexity of semiconductors. As a result, we expect that we will need to constantly offer more sophisticated packaging and testing technologies and processes in order to respond to competitive industry conditions and customer requirements. We have successfully combined our packaging, testing and materials technologies with the expertise of electronic manufacturing services at the systems level to develop our SiP business. SuccessWe also entered into multiple technology license agreements with DECA Technologies Inc. to advance our fan-out technology. There is, however, no assurance that our development efforts for our SiP business or the use of alicensed technology to further advance our fan-out technology will be successful.

Additionally, in August 2018, we resolved to sell our 30.0% equity interest of ASEN to Tsinghua Unigroup Ltd.. We believe the strategic relationship with Tsinghua Unigroup Ltd. will allow us to expand our opportunities in the P.R.C.’s fast-growing semiconductor market. Although we expect this strategic relationship will expand our opportunities in the semiconductor market, we cannot assure you that this relationship will be productive or lead to sustainable commercial success. We continue to develop new product depends on a number of factors such as product acceptance by the market. New products are developed in anticipation of future demand. We cannot assure youHowever, there is no assurance that the launch of any new product will be successful or that whether we will be able to produce sufficient quantities of these products to meet market demand. If we fail to develop, or obtain access to, advances in packaging or testing technologies or processes, we may become less competitive and less profitable. In addition, advances in technology typically lead to declining average selling prices for semiconductors packaged or tested with older technologies or processes. As a result, if we cannot reduce the costs associated with our services, the profitability of a given service and our overall profitability may decrease over time.

Our operating results are subject to significant fluctuations, which could adversely affect the market value of your investment.

Our operating results have varied significantly from period to period and may continue to vary in the future. Downward fluctuations in our operating results may result in decreases in the market price of our common shares and the ADSs. Among the more important factors affecting our quarterly and annual operating results are the following: 

Due to the factors listed above, our future operating results or growth rates may be below the expectations of research analysts and investors. If so, the market price of our common shares and the ADSs, and thus the market value of your investment, may fall.

Due to our high percentage of fixed costs, we may be unable to maintain our gross margin at past levels if we are unable to achieve relatively high capacity utilization rates.

Our operations, in particular our testing operations, are characterized by relatively high fixed costs. We expect to continue to incur substantial depreciation and other expenses in connection with our acquisitions of equipment and facilities. Our profitability depends not only on the pricing levels for our services or products, but also on utilization rates for our machinery and equipment, commonly referred to as “capacity utilization rates.” In particular, increases or decreases in our capacity utilization rates can significantly affect gross margins since the unit cost generally decreases as fixed costs are allocated over a larger number of units. In periods of low demand, we experience relatively low capacity utilization rates in our operations, which leads to reduced margins. For example, in the fourth quarter of 2008, we experienced lower than anticipated utilization rates in our operations due to a significant decline in worldwide demand for our packaging and testing services, which resulted in reduced margins during that period. Although capacity utilization rates have recovered since 2009, we cannot assure you that we will be able to maintain or surpass our past gross margin levels if we cannot consistently achieve or maintain relatively high capacity utilization rates.

If we are unable to manage our expansion or investments effectively, our growth prospects may be limited and our future profitability and core business operations may be adversely affected.

We have significantly expanded our operations through both organic growthacquisitions and acquisitionsjoint ventures in recent years. For example,In 2010, we acquired the controlling interest of Universal Scientific in 2010Industrial to expand our product offering scope to electronic manufacturing services;services. In May 2015, we also entered into a joint venture agreement with TDK Corporation in May 2015 to further expand our business in embedded substrates; furthermore,substrates. In June 2016, we entered into the Joint Share Exchange Agreement with SPIL in June 2016 to take advantage of the synergy effect of business combination between SPIL and us. WeASE. In February 2018, we entered into a joint venture agreement with Qualcomm Incorporated to expand our SiP business. In August 2018, to advance our global supply system and expand our commercial reach in Europe, we entered into an equity transfer agreement with Chung Hong Electronics (Suzhou) Co., Ltd. to acquire its 60.0% equity in its Polish subsidiary Chung Hong Electronics Poland SP.Z.O.O. In August 2018, we also entered into a joint venture framework contract and shareholder agreement with Cancon Information Industry Co., Ltd. to align corporate resources and advance our position in the field of secure and controllable high-performance server products. In October 2018, we entered into a share capital and reserves increase agreement with Jinhua Integrated Circuit Co., Ltd. to jointly invest in Siliconware Electronics (Fujian) Co., Limited to form a strategic alliance to secure stable orders; this agreement however has been paused and will not be continued in the foreseeable future. In January 2019, we entered into a project investment agreement with China Merchants Group of Huizhou Daya Bay Economic and Technological Development Zone of Guangdong Province, to set up a wholly-owned subsidiary in Huizhou Daya Bay Economic and Technological Development Zone to address the growing needs of our capacity expansion and the development of our business in South China.

While we expect that we will continue to expand our operations in the future. The purpose of our expansion is mainlyfuture to provide total solutions to existing customers or to attract new customers and broaden our product range for a variety of end-use applications. However,offerings, rapid expansion may place a strain on our managerial, technical, financial, operational and other resources. As a result of our expansion, we have implemented and will continue to implement additional operational and financial controls and hire and train additional personnel. Any failure to manage our growth effectively could lead to inefficiencies and redundancies and result in reduced growth prospects and profitability.

In addition, we have recently made several investments in the real estate development businesses mostly in China. The PRCP.R.C. property market is volatile and may experience undersupply or oversupply and property price fluctuations. The central and local governments frequently adjust monetary and other fiscal policies to prevent and curtail the overheating of the economy. Such policies may lead to changes in market conditions, including price instability and imbalance of supply and demand in respect of office, residential, retail, entertainment, cultural and intellectual properties. We may continue to make investments in this area in the future and our diversification in this industry may put pressure on our managerial, financial, operational and other resources. Our exposure to risks related to real estate development may also increase over time as a result of our expansion into such a business. There can be no assurance that our investments in such a business will yield the anticipated returns and that our expansion into such a business, including the resulting diversion of management’s attention, will not adversely affect our core business operations.

We may not be successful in pursuing mergers and acquisitions. Any mergers or acquisitions we make may lead to a diversion of management resources.

Our future success may depend on acquiring businesses and technologies, making investments or forming joint ventures that complement, enhance or expand our current product offerings or otherwise offer us growth opportunities. In pursuing such acquisitions, we may face competition from other companies in the semiconductor industry. Our ability to acquire or invest in suitable targets may be limited by applicable laws and regulations in Taiwan,the R.O.C., P.R.C., the United States and other jurisdictions where we do business. Even if we are successful in making such acquisitions or investments, we may have to expend substantial amounts of cash, incur debt, assume loss-making divisions and incur other types of expenses. We may also face challenges in successfully integrating any acquired companies into our existing organization or in creating the anticipated cost synergies.synergistic benefits. Each of these risks could have a material adverse effect on our business, financial condition and results of operations.

The financial performance of our equity method investments could adversely affect our results of operations.

As part of our business strategy, we have and may continue to pursue acquisitions of businesses and assets, strategic alliances and joint ventures. We currently have equity investments in certain entities and the accounting treatment applied for these investments varies depending on a number of factors, including, but not limited to, our percentage ownership and the level of influence we have over the relevant entity. Any losses experienced by these entities could adversely affect our results of operations and the value of our investment. In addition, if these entities were to fail and cease operations, we may lose the entire value of our investment and the stream of any shared profits.

For example, on September 22, 2015, upon the expiration of the Initial SPIL Tender Offer period, we acquired 779,000,000 common shares (including those represented by American depositary shares) of SPIL through the Initial SPIL Tender Offer. We subsequently acquired an additional 258,300,000 common shares of SPIL (including those represented by American depositary shares) through open market purchases in March and April 2016. As of April 21, 2017, we beneficially own 1,037,300,000 common shares of SPIL (calculated as the sum of 988,847,740 common shares of SPIL and 48,452,260 common shares of SPIL underlying 9,690,452 American depositary shares of SPIL), representing 33.29% of the issued and outstanding share capital of SPIL (calculated based on 3,116,361,139 common shares of SPIL (including those represented by American depositary shares) outstanding as of March 31, 2017 as reported in SPIL’s annual report on Form 20-F for the year ended December 31, 2016). See “Item 4. Information on the Company— History and Development of the Company—Acquisition of Common Shares and American Depositary Shares of SPIL.” Although we are currently a 33.29% shareholder of SPIL, we currently do not control SPIL and do not have the power to direct SPIL or its management. As the investment in SPIL is accounted for using the equity method, to the extent that SPIL has net losses, our financial results will be adversely affected to the extent of our pro rata portion of these losses. In addition, as we currently do not control SPIL and do not have the power to direct SPIL or its management, we do not have access to SPIL’s books and records and may not be able to obtain SPIL’s financial information on a timely basis. SPIL’s reporting time for its financial statements may affect our ability to timely report our own financial statements or meet scheduled announcements for earnings releases.

There can be no assurance that we will be able to maintain or enhance the value or performance of our investee companies or that we will achieve the returns or benefits sought from such investments. If our interests differ from those of other investors in our investee companies, we may not be able to enjoy synergies with the investee and it may adversely affect our financial results or financial condition.

We maydid not be successfulrecognize impairment loss in 2016 and 2017 in our acquisition of 100% of SPIL shares not otherwise owned by us.

On September 22, 2015, upon the expiration of the Initial SPIL Tender Offer period, we acquired 779,000,000 common shares (including those represented by American depositary shares) of SPIL through the Initial SPIL Tender Offer. In December 2015, following an announcement by SPIL that it plans to issue 1,033 million shares, if approved by SPIL shareholders, to a third party pursuant to a share placement agreement, we submitted a written proposal to SPIL’s Board proposing to acquire all SPIL shares not otherwise owned by ASE, contingent upon the termination of the share purchase agreement, and later launched the Second SPIL Tender Offer on December 29, 2015 to offer to purchase up to 770,000,000 common shares of SPIL (including those represented by American depositary shares). On March 17, 2016, we announced that the Second SPIL Tender Offer was unsuccessful because the Taiwan Fair Trade Commission (the “TFTC”) did not render its decision before the expiration of the Second SPIL Tender Offer. The TFTC subsequently suspended its review on March 23, 2016. Notwithstanding the failure of the Second SPIL Tender Offer, we continued to seek control of SPIL, with the purpose of effecting an acquisition of 100% of the common shares and American depositary shares of SPIL. Under the Joint Share Exchange Agreement, a holding company in Taiwan will be established that would hold 100% ofinvestment using the equity interestsmethod of both ASE and SPIL such that ASE and SPIL would be wholly owned subsidiariesaccounting. In 2018, we evaluated the recoverable amount of such holding company, which would maintain all current operationsour equity method investments, Deca Technologies Inc., by the present value of ASE and SPIL in Taiwan.cash flow projection made by equity method investment’s management with a discount rate of 14.1%. The recoverable amount was lower than its carrying amount, therefore, we recognized impairment charges of NT$521.0 million (US$17.0 million). See “Item 4. Information on the Company— History5. Operating and DevelopmentFinancial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates—Valuation of the Company—Acquisition of Common Shares and American Depositary Shares of SPIL.Investments.”

The successful consummation of the SPIL Acquisition is subject to a number of factors, including, among other things, obtaining all necessary antitrust or other regulatory approvals in Taiwan, the United States, the PRC and other jurisdictions where we do business. Although we have obtained regulatory approvals in Taiwan, in the event these conditions cannot be satisfied, we may re-evaluate our interest in SPIL and may consider, among other legally permissible alternatives, to dispose our SPIL shares at a loss, which may significantly affect our financial position. Notwithstanding the above, even if we are successful in consummating the SPIL Acquisition, we may face challenges in successfully integrating SPIL into our existing organization or in realizing anticipated benefits and cost synergies. Each of these risks could have a material adverse effect on our business and operations, including our relationship with customers, suppliers, employees and other constituencies, or otherwise adversely affect our financial condition and results of operations.

There may be risks associated with the proposed holding company structure of SPIL Acquisition.

We entered into the Joint Share Exchange Agreement with SPIL in June 2016, pursuant to which ASE Holding, a holding company in Taiwan, will hold 100% of the equity interests in both ASE and SPIL such that ASE and SPIL will become wholly owned subsidiaries of ASE Holding. The proposed holding company will maintain all current operations of ASE and SPIL in Taiwan. The common shares of ASE and SPIL will be delisted from the TWSE. The ADSs of ASE and SPIL will be delisted from NYSE and NASDAQ, respectively, and will become eligible for deregistration under the Exchange Act. Subsequently, the common shares of ASE Holding will be listed on the TWSE, and the ADSs of ASE Holding will be listed on the NYSE. The implementation of such corporate structure restructuring plan may require approvals from relevant regulators and may result in unforeseen contingent risks, including increase in tax liabilities or trading discounts relating to a holding company discount that may become apparent in the future.

The packaging and testing businesses are capital intensive. If we cannot obtain additional capital when we need it, our growth prospects and future profitability may be adversely affected.

The packaging and testing business is capital intensive. We will need capital to fund the expansion of our facilities as well as fund our research and development activities in order to remain competitive. We believe that our existing cash, marketable securities, expected cash flow from operations and existing credit lines under our loan facilities will be sufficient to meet our capital expenditures, working capital, cash obligations under our existing debt and lease arrangements, and other requirements for at least the next twelve months. However, future capacity expansions or market or other developments may cause us to require additional funds. Our ability to obtain external financing in the future is subject to a variety of uncertainties, including:

If we are unable to obtain funding in a timely manner or on acceptable terms, our results of operations and financial conditions may be materially and adversely affected.

Restrictive covenants and broad default provisions in our existing debt agreements may materially restrict our operations as well as adversely affect our liquidity, financial condition and results of operations.

We are a party to numerous loans and other agreements relating to the incurrence of debt, many of which may include restrictive covenants and broad default provisions. In general, covenants in the agreements governing our existing debt, and debt we may incur in the future, may materially restrict our operations, including our ability to incur debt, pay dividends, make certain investments and payments, other than in connection with restructurings of consolidated entities, and encumber or dispose of assets. In addition, any global economic deterioration or ineffective expansion may cause us to incur significant net losses or force us to assume considerable liabilities. We cannot assure you that we will be able to remain in compliance with our financial covenants, which, as a result, may lead to a default. This may thereby restrict our ability to access unutilized credit facilities or the global capital markets to meet our liquidity needs. Furthermore, a default under oneany agreement by us or one of our subsidiaries may also trigger cross-defaults under our other agreements. In the event of default, we may not be able to cure the default or obtain a waiver on a timely basis. An event of default under any agreement timely governing our existing or future debt, if not cured or waived, could have a material adverse effect on our liquidity, financial condition and results of operations.

We have on occasion failed to comply with certain financial covenants in some of our loan agreements. Such non-compliance may also have, through broadly worded cross-default provisions, resulted in default under some of the agreements governing our other existing debt. For example, we failed to comply with certain financial covenants in some of our loan agreements as a result of our acquisition of the controlling interest of Universal Scientific Industrial in February 2010, for which we have timely obtained waivers from our counterparties. If we are unable to timely remedyrectify any of ourpossible non-compliance under such loan agreements or obtain applicable waivers or amendments, we would breach our financial covenants and our financial condition would be adversely affected. As of December 31, 2016,2018, we were not in breach of any of the financial covenants under our existing loan agreements, although we cannot provide any assurance that we will not breach any of such financial covenants in the future.

We depend on select personnel and could be affected by the loss of their services.

We depend on the continued service of our executive officers and skilled technical personnel. Our business could suffer if we lose the services of any of these personnel and cannot adequately replace them. Although some of these management personnel have entered into employment agreements with us, they may nevertheless leave before the expiration of these agreements. We are not insured against the loss of the services of any of our personnel. In addition, these proceedings may divert these and other employees’ attention from our business operations.

In addition, we may be required to increase substantially the number of these employees in connection with our expansion plans, and there is intense competition for their services in this industry. We may not be able to either retain our present personnel or attract additional qualified personnel as and when needed. In addition, we may need to increase employee compensation levels in order to attract and retain our existing officers and employees and the additional personnel that we expect to require. Furthermore, a portion of the workforce at our facilities in Taiwan are foreign workers employed under work permits, which are subject to government regulations on renewal and other terms. Consequently, our business could also suffer if the Taiwan regulations relating to the employment of foreign workers were to become significantly more restrictive or if we are otherwise unable to attract or retain these workers at a reasonable cost.

The ongoing proceeding involving Dr. Tien Wu may have an adverse impact on our business and cause our common shares and ADS price to decline.

Dr. Tien Wu, ASEH’s director and chief operating officer, is currently undergoing a criminal proceeding brought by the Kaohsiung Prosecutor’s Office. The indictment alleges that Dr. Tien Wu violated Article 157-1 of the R.O.C. Securities and Exchange Act for insider trading activities involving SPIL common shares conducted during the period when the Initial SPIL Tender Offers, the Second SPIL Tender Offers and negotiations of the memorandum of understanding in relation to SPIL Acquisition took place. Dr. Tien Wu is accused of tipping off a friend about the aforementioned tender offers and negotiation ahead of the public announcements. No judicial conclusion has been reached yet for this proceeding. Further development of this proceeding may result in regulatory scrutiny from the TWSE or other regulators on a discretionary basis. If Dr. Tien Wu is sentenced due to the alleged violations, investor confidence in our company could be impaired and our business capacity to retain or attract clients could be negatively affected. ASEH has reinforced internal control measures after this incident and no ASEH directors are expected to become party to any current or future litigation related to Dr. Tien Wu.

On October 26, 2018, the R.O.C. Securities and Futures Investors Protection Center filed a civil lawsuit against Dr. Tien Wu and ASEH, requesting the court to remove him from ASEH’s board based on Article 10-1 of the Securities Investor and Futures Trader Protection Act. The proceeding is currently stayed by consent of the parties for a period of four months starting from March 28, 2019. There is no assurance that this proceeding or the further scrutiny from regulators will not generate publicity or media attention. Any negative publicity in connection to this legal proceeding may adversely affect ASEH’s brand and reputation and result in a material adverse impact on their business operations and prospects. As ASEH depends on the continued service of its executive officers and is not insured against the loss of service of any of their personnel, ASEH’s business operations could suffer if it loses the service of any executive officers, including Dr. Tien Wu, and cannot adequately replace them.

If we are unable to obtain additional packaging and testing equipment or facilities in a timely manner and at a reasonable cost, our competitiveness and future profitability may be adversely affected.

The semiconductor packaging and testing businesses are capital intensive and require significant investment in expensive equipment manufactured by a limited number of suppliers. The market for semiconductor packaging and testing equipment is characterized, from time to time, by intense demand, limited supply and long delivery cycles. Our operations and expansion plans depend on our ability to obtain a significant amount of such equipment from a limited number of suppliers. From time to time we have also leased certain equipment. We have no binding supply agreements with any of our suppliers and acquire our packaging and testing equipment on a purchase order basis, which exposes us to changing market conditions and other substantial risks. For example, shortages of capital equipment could result in an increase in the price of equipment and longer delivery times. Semiconductor packaging and testing also require us to operate sizeable facilities. If we are unable to obtain equipment or facilities in a timely manner, we may be unable to fulfill our customers’ orders, which could adversely affect our growth prospects as well as financial condition and results of operations. See “Item 4. Information on the Company—Business Overview—Equipment.”

Fluctuations in exchange rates could result in foreign exchange losses.

Currently, the majority of our revenues are denominated in U.S. dollars, with a portion denominated in NT dollars and Japanese yen. Our operating costs and operating expenses, on the other hand, are incurred in several currencies, primarily NT dollars, U.S. dollars, RMB, Japanese yen, Korean won, as well as, to a lesser extent, Singapore dollars and Malaysian ringgit. In addition, a substantial portion of our capital expenditures, primarily for the purchase of packaging and testing equipment, has been, and is expected to continue to be, denominated in U.S. dollars, with the remainder in Japanese yen. Fluctuations in exchange rates, primarily among the U.S. dollar and Japanese yen against the NT dollar the Japanese yen and RMB, will affect our costs and operating margins. In addition, these fluctuations could result in exchange losses and increased costs in NT dollar and other local currency terms. Despite hedging and mitigating techniques implemented by us, fluctuations in exchange rates have affected, and may continue to affect, our financial condition and results of operations. We recognized net foreign exchange lossesgains of NT$1,222.0 million and NT$713.21,928.4 million in 2014 and 2015, respectively, and2016, net foreign exchange gains of NT$1,928.43,502.6 million in 2017 and net foreign exchange losses of NT$1,015.6 million (US$59.533.2 million) in 2016.2018. We cannot assure you that we will achieve foreign exchange gains in the future. See “Item 11. Quantitative and Qualitative Disclosures about Market Risk—Market Risk—Foreign Currency Exchange Rate Risk.”

The loss of a large customer or disruption of our strategic alliance or other commercial arrangements with semiconductor foundries and providers of other complementary semiconductor manufacturing services may result in a decline in our revenues and profitability.

Although we have a large customer base, we have derived and expect to continue to derive a large portion of our revenues from a small group of customers during any particular period due in part to the concentration of market share in the semiconductor and electronics industries. Our five largest customers together accounted for approximately 40.3%42.0%, 48.2%46.4% and42.0% 46.2% of our operating revenues in 2014, 20152016, 2017 and 2016,2018, respectively. One customer accounted for more than 10.0% of our operating revenues in 2014, 20152016, 2017 and 2016.2018. The demand for our services from a customer is directly dependent upon that customer’scustomer��s level of business activity, which could vary significantly from year to year. Our key customers typically operate in the cyclical semiconductor and electronic business and, in the past, have varied, and may vary in the future, order levels significantly from period to period. Some of these companies are relatively small, have limited operating histories and financial resources, and are highly exposed to the cyclicality of the industry. We cannot assure you that these customers or any other customers will continue to place orders with us in the future at the same levels as in past periods. The loss of one or more of our significant customers, or reduced orders by any one of them, and our inability to replace these customers or make up for such orders, could adversely affect our revenues and profitability. In addition, we have in the past reduced, and may in the future be requested to reduce, our prices to limit the level of order cancellations. Any price reduction would likely reduce our margins and profitability.

Since 1997, we have maintained a strategic alliance with Taiwan Semiconductor Manufacturing Company Limited, or TSMC, one of the world’s largest dedicated semiconductor foundries. TSMC designates us as their non-exclusive preferred provider of packaging and testing services for semiconductors manufactured by TSMC. In addition,May 2015, we entered into a joint venture agreement with TDK Corporation in May 2015 to further expand our business in embedded substrates. In February 2018, we entered into a joint venture agreement with Qualcomm Incorporated to expand our SiP business. In August 2018, we resolved to sell our 30.0% equity interest in ASEN to TsinghuaUnigroup Ltd. In August 2018, we entered into an equity transfer agreement with Chung Hong Electronics (Suzhou) Co., Ltd. to acquire its 60.0% quity in its subsidiary Chung Hong Electronics Poland SP.Z.O.O. to set up production base and expand our business in Europe to build a much more complete global supply system. In August 2018, we also entered into a joint venture framework contract and shareholder agreement with Cancon Information Industry Co., Ltd. to integrate the industrial resources to cooperate deeply in the field of secure and controllable high-performance server products for customers. In January 2019, we entered into a project investment agreement with China Merchants Group of Huizhou Daya Bay Economic and Technological Development Zone of Guangdong Provinceg to set up a wholly-owned subsidiary in Huizhou Daya Bay Economic and Technological Development Zoneto meet the growing needs of our capacity expansion and the development of our business in South China. Such strategic alliances, as well as our other commercial arrangements with providers of other complementary semiconductor manufacturing services, enable us to offer total semiconductor manufacturing solutions to our customers. These strategic alliances and other commercial arrangements may not achieve their anticipated commercial benefits and may be terminated at any time. Any failure in successfully maintaining such alliances, any termination of such alliances or our failure to enter into substantially similar strategic alliances or commercial arrangements may adversely affect our competitiveness and our revenues and profitability.

We rely on a limited number of key customers in certain products for our revenues, and our results of operations may be adversely affected by a reduction of business from our key customers.

Our results of operations also dependsdepend on the performance and business of our key customers. Accordingly, risks that could seriously harm our key customers could harm us as well, including:

The launch and market acceptance of our individual key customers’ products could significantly impact our product and customer mix, resulting in significant volatility in the demand for the solutions we offer and our results of operations. It is also possible that a key customer’s market share with respect to its product may decline as its competitors introduce new products, which could adversely affect our results of operations, particularly if we are unable to sell our solutions to such competitors. Furthermore, sales of our key customers’ products are subject to seasonal fluctuation.

Our revenues and profitability may decline if we are unable to obtain adequate supplies of raw materials in a timely manner and at a reasonable price.

Our operations, such as packaging operations, substrate operations and electronic manufacturing services, require that we obtain adequate supplies of raw materials on a timely basis. Shortages in the supply of raw materials have in the past resulted in occasional price increases and delivery delays. In addition, the operations of some of our suppliers are vulnerable to natural disasters, such as earthquakes and typhoons, the occurrences of which may deteriorate and prolong the shortage or increase the uncertainty of the supply of raw materials. For example, on March 11, 2011, a major earthquake occurred off the coast of Japan resulting in a large tsunami and radiation leak at the Fukushima nuclear power plant. We experienced a disruption to the supply of raw materials from Japan for about three to four weeks due to the fear of radiation contamination and the reduction or postponement in production by some of our Japanese suppliers. Although the purchase of supplies from Japan has been restored to the previous level, we cannot assure you that we will not suffer long-term from the impact of the earthquake and the tsunami. In addition, further earthquakes, aftershocks thereof or other disasters in Japan or other regions in which we operate may cause a decline in our sales. Any of the above events or developments may have a material adverse effect on our business, results of operations and financial condition.

Raw materials such as IC substrates are prone to supply shortages since such materials are produced by a limited number of suppliers, such as Kinsus Interconnect Technology Corporation, Nanya Printed Circuit Board Corporation, Samsung Electro-Mechanics Co. Ltd., and Unimicron Technology Corp. and LG Innotek Co., Ltd. Our operations conducted through our wholly owned subsidiaries ASE Electronics and ASE Shanghai have improved our ability to obtain IC substrates on a timely basis and at a reasonable cost. In 2016,2018, our interconnect materials operations supplied approximately 29.7%14.2% of our consolidated substrate requirements by value. We do not expect that our internal interconnect materials operations will be able to meet all of our interconnect materials requirements. Consequently, we will remain dependent on market supply and demand for our raw materials. In addition, recent fluctuations in prices of precious metals, such as gold, have also affected the price at which we have been able to purchase the principal raw materials we use in our packaging processes. We cannot guarantee that we will not experience shortages in the near future or that we will be able to obtain adequate supplies of raw materials in a timely manner or at a reasonable price. Our revenues and net income could decline if we are unable to obtain adequate supplies of high quality raw materials in a timely manner or if there are significant increases in the costs of raw materials that we cannot pass on to our customers.

Regulations related to conflict minerals could adversely affect our business, financial condition and results of operations.

The Dodd-Frank Wall Street Reform and Consumer Protection Act contains provisions to improve transparency and accountability concerning the supply of certain minerals, known as conflict minerals, which are defined as cassiterite, columbite-tantalite, gold, wolframite or their derivatives and other minerals determined by the U.S. government to be financing conflict in the Democratic Republic of Congo and adjoining countries. As a result, in August 2012 the SEC adopted annual disclosure and reporting requirements for those companies who use conflict minerals in their products. These rules require companies that manufacture or contract to manufacture products for which conflict minerals are necessary to the functionality or production to begin scrutinizing the origin of conflict minerals in their products starting from January 1, 2013, and file a new form, Form SD, containing the conflict minerals disclosure by May 31 for the prior calendar year, beginning May 31, 2014. We filed a specialized disclosure report on Form SD for the years ended December 31, 2013, 2014, 2015, 2016 and 20152017, on May 30, 2014, June 1, 2015, and May 31, 2016, May 31, 2017 and April 27, 2018 respectively. Pursuant to the SEC rules governing conflict minerals disclosures, we have engaged an independent auditing firm to conduct audits on our due diligence framework to provide a private sector report for our specialized disclosure report on Form SD for the years ended December 31, 2014, 2015, 2016, 2017 and 2016.2018. As a result, there will be costs associated with complying with these disclosure requirements, including costs for diligence to determine the sources of conflict minerals used in our products and other potential changes to products, processes or sources of supply as a consequence of such verification activities. The implementation of these rules could adversely affect the sourcing, supply and pricing of materials used in our products.

As there may be only a limited number of suppliers offering “conflict free” minerals, we cannot be sure that we will be able to obtain necessary “conflict free” minerals from such suppliers in sufficient quantities or at competitive prices. Also, we may face adverse effects to our reputation if we determine that certain of our products contain minerals not determined to be conflict free or if we are unable to sufficiently verify the origins for all conflict minerals used in our products through the procedures we may implement.

System security risks, data protection breaches or unexpected system outage or failures could harm our business, financial condition and results of operations.

We rely on the efficient and uninterrupted operation of complex information technology applications, systems and networks to operate our business. Our systems are vulnerable to damage or interruption from earthquakes, terrorist attacks, floods, fires, power loss, telecommunications failures, cyber-attacks, computer viruses, computer denial of service attacks or other attempts to harm our system, and similar events. In recent years, the risks that we face from cyber-attacks have increased significantly. Some of these attacks may originate from well-organized, highly skilled organizations. Although there have not been reported major cyber-attacks against our systems in the recent years, any such attack or system or network disruption could result in a loss of our intellectual property, the release of commercially sensitive information, customer or employee personal data. Failures to protect the privacy of customer and employee confidential data against breaches of network security could result in damage to our reputation. 

Furthermore, some of our data centers are located in areas with a high risk of major earthquakes. Our data centers are also subject to break-ins, sabotage and intentional acts of vandalism, and to potential disruptions if the operators of these facilities have financial difficulties. Some of our systems are not fully redundant, and our disaster recovery planning cannot account for all eventualities. The occurrence of a natural disaster, a decision to close a facility we are using without adequate notice for financial reasons or other unanticipated problems at our data centers could result in loss of production capabilities and lengthy interruptions in our service. Any damage to or failure of our systems could result in interruptions in our service. Interruptions in our service could materially and adversely affect our business, financial condition and results of operations.

A cybersecurity breach could interfere with our business operations, compromise confidential information, adversely impact our reputation and operating results and potentially lead to litigation and other liabilities.

Cybersecurity threats continue to expand and evolve globally. Our cybersecurity response system includes a risk notification and assessment scheme that categorizes and implements different responses to address different levels of cybersecurity risk. In addition, we have implemented enterprise risk management programs at our major manufacturing sites and have included cybersecurity threats as an integral subject in these programs. While we actively take measures to manage information technology security risks, there can be no assurance that these measures will be sufficient to mitigate all potential risks to our system, networks and data.

Although our on-site safety teams conduct periodic meetings to update our cybersecurity protocols and cybersecurity is a key part of our risk management program that our management regularly reviews, a failure or breach in security could expose us and our customers, dealers and suppliers to risks of unauthorized access to information technology systems, misuse and compromise of confidential information, manipulation and destruction of data, which could potentially result in disruption of our business operations and adversely affect our reputation, competitive position, financial condition and results of operations. Security breaches could also result in litigation with third parties, regulatory actions and higher costs of implementing additional data protection measures.

Negative publicity may adversely affect our brand and reputation, which may result in a material adverse impact on our business, results of operations, business prospects and cause fluctuations in the price of our common shares and ADSs.

Any negative publicity may damage our brand and reputation, harm our ability to attract and retain customers and have a material adverse impact on our results of operations as well as cause fluctuations in the trading price of our common shares and ADSs. In addition, any change in policy or the direction in which we carry out our corporate social responsibility or corporate sustainability activities may also have an adverse effect on our business reputation. In recent years, we have experienced and may continue to experience negative publicity in connection with administrative penalties and criminal charges related to alleged violations of environmental regulations and laws. For further details, see “Item 4. Information on the Company—Business Overview—Environmental Matters,” “Item 4. Information on the Company—Property, Plants and Equipment” and “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.”

Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations.

We are subject to various laws and regulations relating to the use, storage, discharge and disposal of chemical by-products of, and water used in, our packaging and interconnect materials production processes, and the emission of volatile organic compounds and the discharge and disposal of solid industrial wastes from electronic manufacturing services operations. In the recent years, we have been subject to environmental administrative actions and judicial proceedings related to certain wastewater discharge incidents that occurred at our facilities. As a result of these proceedings, we have been subject to monetary fines as well as sanctions, including orders to suspend or limit our operations and criminal charges against us.

InOn December 20, 2013, the Kaohsiung City Environmental Protection Bureau orderedimposed a fine of NT$102.0 million (the “Administrative Fine”) upon us to suspend the operations at our K7 Plant’s wafer-level process where nickel was used for alleged wastewater discharge violations and imposed a NT$110.1 million fine against us. The NT$110.1 million fineof the Water Pollution Control Act. We filed an administrative appeal to nullify the Administrative Fine, which was later reduced to NT$109.4 million as ordereddismissed by the Kaohsiung City Environmental Protection Bureau.Government. In DecemberAugust 2014, the Kaohsiung City Environmental Protection Bureau lifted the suspension order and approved the full resumption of operations of our K7 Plant after ordering a series of examinations, hearings and trial runs. In September 2015, the fine was further reduced to NT$102.0 million by the Kaohsiung City Environmental Protection Bureau and we received a refund of NT$7.3 million in October 2015. Although our K7 Plant has resumed full operation, we may be subject to other new environmental claims, charges or investigations on our K7 Plant or other facilities that may cause similar or more sever interruptions to our business and operations.

With respect to the NT$102.0 million administrative penalty imposed on us by the Kaohsiung City Environmental Protection Bureau, we appealed to the Kaohsiung High Administrative Court in August 2014 seeking to (i) revoke Kaohsiung City Government’s decision, (ii) lift the administrative penalty imposed on us and (iii) demand a refund of the administrative penalty.Administrative Fine. On March 22, 2016, the Kaohsiung High Administrative Court revoked Kaohsiung City Government’s decision and lifted the administrative penalty. Our demand for a refund of the fineAdministrative Fine was dismissed. We appealed to the Supreme Administrative Court on April 14, 2016 against the Kaohsiung High Administrative Court’s unfavorable ruling in dismissing a refund. The outcomeOn June 8, 2017, the Supreme Administrative Court overturned Kaohsiung High Administrative Court’s decision and ordered Kaohsiung Environmental Protection Bureau to refund the Administrative Fine paid by us.

In connection with the same alleged violations at our K7 plant, in October 2014, the Kaohsiung District Court ruled that we were in violation of the ROCR.O.C. Waste Disposal Act and imposed on us a criminal penalty of NT$3.0 million. We appealed the case to the Taiwan High Court Kaohsiung District Branch in November 2014. InOn September 29, 2015, the Taiwan High Court Kaohsiung District Branch overturned the decision made by Kaohsiung District Court and found the Companyus not guilty and repealed the criminal penalty imposed on the Company.us. The verdict was final and not appealable. For additional details of these administrative actions and judicial proceedings related to our K7 Plant see “Item 4. Information on the Company—Business Overview—Environmental Matters,” “Item 4. Information on the Company—Property, Plants and Equipment” and “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.” Defending against any of these pending or future actions will likely be costly and time-consuming and could significantly divert management’s efforts and resources. Any penalties, fines, damages or settlements made in connection with any criminal, civil, and/or administrative investigations and/or lawsuits may have a material adverse effect on our business, results of operations and future prospects.

We have made, and expect to continue to make, expenditures to maintain strict compliance with such environmental laws and regulations. For example, in order to demonstrate our commitment to environmental protection, in December 2013, our board of directors approved contributions to environmental protection efforts in Taiwan in a total amount of not less than NT$3,000.0 million, to be made in the next 30 years. For the years ended December 31, 2014, 20152016, 2017 and 2016,2018, we have made contributions in the amount of NT$100.0 million (US$3.13.3 million) each, respectively, through ASE Cultural and Educational Foundation to fund various environmental projects, and our board of directors have resolved in a resolution in January 2017February 2019 to contribute NT$100.0 million (US$3.13.3 million) through ASE Cultural and Educational Foundation in environmental projects in 2017.2019. The costs of current and future compliance with environmental laws and regulations could require us to acquire costly equipment or to incur other significant expenses that may have a material adverse effect on our financial condition and results of operations.

Negative publicity may adversely affect our brand and reputation, which may result in a material adverse impact on our business, results of operations and prospects and cause fluctuations in the price of our common shares and ADSs.

Any negative publicity may damage our brand and reputation, harm our ability to attract and retain customers and result in a material adverse impact on our results of operations and prospects as well as cause fluctuations in the trading price of our common shares and ADSs. In addition, anyClimate change, in policy or directions in which we carry out our corporate social responsibility or corporate sustainability activities may also have an adverse effect on our reputation. Furthermore, in recent years, we have experienced and may continue to experience negative publicity in connection with administrative penalties and criminal charges related to alleged violations of environmental regulations and laws. For further details, see “—Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations,” “Item 4. Information on the Company—Business Overview—Environmental Matters,” “Item 4. Information on the Company—Property, Plants and Equipment” and “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.”

Climate changewater shortage and other environmental concerns may negatively affect our business.

There is increasing concern that climate change is occurring and may have dramatic effects on human activity without aggressive remediation steps. A modest change in temperature would result in increased coastal flooding, changing precipitation patterns and increasing risk of extinction for the world’s species. Extreme weather conditions, such as droughts and floods, that occur due to climate change can also impact our business operations. For example, since our business operations depend on adequate supplies of water, an extended droughts may affect our ability to obtain sufficient amounts of water and threaten our production capacity.

Public expectations for reductions in greenhouse gas emissions could result in increased energy, transportation and raw material costs. Scientific examination of, political attention to and rules and regulations on issues surrounding the existence and extent of climate change may result in an increase in the cost of production due to increase in the prices of energy and introduction of energy or carbon tax. Various regulatory developments have been introduced that focus on restricting or managing emissions of carbon dioxide, methane and other greenhouse gases. Enterprises may need to purchase at higher costs emission credits, new equipment or raw materials with lower carbon footprints. These developments and further legislation that is likely to be enacted could negatively affect our operations. Changes in environmental regulations, such as those onthat concern the use of perfluorinated compounds, could increase our production costs, which couldmay adversely affect our results of operation and financial condition.

In addition, more frequent droughts and floods, extreme weather conditions and rising sea levels could occur due to climate change. The impact of such changes could be significant as most of our factories are located in islands including Taiwan, Singapore, Korea and Malaysia. For example, transportation suspension caused by extreme weather conditions could harm the distribution of our products. Similarly, our operations depend upon adequate supplies of water, and extended or serious droughts may affect our ability to obtain adequate supplies of water and threaten our production. We cannot predict the economic impact, if any, of disasters or climate change.

Furthermore, increasing climate change and environmental concerns could affect the results of our operations if any of our customers request that we exceed any standards set for environmentally compliant products and services, or if raw materials and/or products are required to meet strict inspection standards with respect to any radioactive contamination as a result of concerns arising from radiation leaking incidents, such as the radiation leak occurred in March 2011 in Japan. If we are unable to offer products that are in compliance with relevant environmental standards, or such products become less reliable due to the lack of reasonably available alternative technologies, it may harm our results of operations.

We may be subject to intellectual property rights disputes, which could materially adversely affect our business.

Our ability to compete successfully and achieve future growth depends, in part, on our ability to develop and protect our proprietary technologies and to secure on commercially acceptable terms certain technologies that we do not own. We cannot assure you that we will be able to independently develop, obtain patents for, protect or secure from any third party, the technologies required. Our failure to successfully obtain such technology may seriously harm our competitive position.

Our ability to compete successfully also depends, in part, on our ability to operate without infringing the proprietary rights of others. We have no means of knowing what patent applications have been filed in the United States or elsewhere until they are granted or published. In particular, the semiconductor and electronics industries are characterized by frequent litigation regarding patent and other intellectual property rights. It is common for patent owners to assert their patents against semiconductor manufacturers. We have received from time to time communication from third parties asserting patents that cover certain of our technologies and alleging infringement of intellectual property rights of others, and we may continue receiving such communication in the future. In the event that any third party makes a valid claim against us or against our customers, we could be required to:

Any one of these developments could place substantial financial and administrative burden on us and hinder our business. In February 2006, Tessera filed a suit against us and others alleging patent infringement. In February 2014, ASE Inc. and our U.S. subsidiary, ASE (U.S.) Inc. reached a term sheet agreement with Tessera to fully resolve the remaining legal proceedings between each other, under which we would pay a total of US$30.0 million to Tessera (which was fully recognized by us in the fourth quarter of 2013) and both Tessera and we would dismiss all pending claims against each other. The final settlement agreement was entered into among the parties in October 2014 and the final settlement amount was reduced to US$27.0 million. In October 2014, the United States District Court for the Northern District of California dismissed all claims between Tessera and us. We have fully paid the settlement amount in January 2015 and reversed the settlement amount of US$3.0 million in the fourth quarter of 2014.

Any litigation, whether as plaintiff or defendant and regardless of the outcome, is costly and diverts company resources. Any of the foregoing could harm our competitive position and render us unable to provide some of our services operations.

Our major shareholders may take actions that are not in, or may conflict with, our public shareholders’ best interest.

Members of the Chang family own, directly or indirectly, a significant interest in our outstanding common shares. See “Item 7. Major Shareholders and Related Party Transactions—Major Shareholders.” Accordingly, these shareholders will continue to have the ability to exercise a significant influence over our business, including matters relating to:

Members of the Chang family may take actions that you may not agree with or that are not in our or our public shareholders’ best interests.

We are an ROCR.O.C. company and, because the rights of shareholders under ROCR.O.C. law differ from those under U.S. law and the laws of certain other countries, you may have difficulty protecting your shareholder rights.

Our corporate affairs are governed by our Articles of Incorporation and by the laws governing corporations incorporated in the ROC.R.O.C. The rights of shareholders and the responsibilities of management and the members of the board of directors under ROCR.O.C. law are different from those applicable to a corporation incorporated in the United States and certain other countries. As a result, public shareholders of ROCR.O.C. companies may have more difficulty in protecting their interests in connection with actions taken by management or members of the board of directors than they would as public shareholders of a corporation in the United States or certain other countries.

We have made investments in, and are exploring the possibility of expanding our businesses and operations to, or making additional investments in, the PRC,P.R.C., which may expose us to additional political, regulatory, economic and foreign investment risks.

We currently maintain packaging and testing facilities and electronic manufacturing services sites in the PRC.P.R.C. We also made substantial investments in PRCP.R.C. real estate development through our subsidiaries in the PRC.P.R.C. Under PRCP.R.C. laws and regulations, foreign investment projects, such as our subsidiaries, must obtain certain approvals from the relevant governmental authorities in the provinces or special economic zones in which they are located and, in some circumstances, from the relevant authorities in the PRC’sP.R.C. central government. Foreign investment projects must also comply with certain regulatory requirements. However, PRCP.R.C. laws and regulations are often subject to varying interpretations and means of enforcement, and additional approvals from the relevant governmental authorities may be required for the operations of our PRCP.R.C. subsidiaries. If required, we cannot assure you that we will be able to obtain these approvals in a timely manner, if at all. Because the PRCP.R.C. government holds significant discretion in determining matters relating to foreign investment, we cannot assure you that the relevant governmental authorities will not take action that is materially adverse to our PRCP.R.C. operations.

In addition, the PRCP.R.C. stock market is subject to extreme price and volume fluctuations. We are the controlling shareholder of Universal Scientific Industrial Shanghai, which is an entity currently listed on the Shanghai Stock Exchange. The PRCP.R.C. securities markets have recently experienced, and may experience in the future, significant price declines and volatility. Any volatility may have a significant effect on Universal Scientific Industrial Shanghai’s share price and may indirectly affect the market price of our common shares and ADSs.

Our global manufacturing and sales activities subject us to risks associated with legal, political, economic or other conditions or developments in various jurisdictions, including in particular the ROCR.O.C. and the PRC,P.R.C., which could negatively affect our business and financial status and therefore the market value of your investment.

Our principal executive office and our principal production facilities are located in the ROC,R.O.C., and a substantial majority of our net revenues are derived from our operations in the ROCR.O.C. and the PRC.P.R.C. In addition, we have operations worldwide and a significant percentage of our revenue comes from sales to locations outside the ROCR.O.C. or the PRC.P.R.C. Operating in the ROC, PRCR.O.C., P.R.C. and other overseas locations exposes us to changes in policies and laws, including environmental regulations, as well as the general political and economic conditions, security risks, health conditions and possible disruptions in transportation networks, in the various countries in which we operate, which could result in an adverse effect on our business operations in such countries. If any of our global operations are affected by the legal, political, economic or other conditions in the jurisdiction we operate, our results of operations as well as market price and the liquidity of our ADSs and common shares may be materially and adversely affected.

Any impairment charges may have a material adverse effect on our net income.

Under IFRS, we are required to evaluate our assets, such as property, plant and equipment, intangible assets, including goodwill, and investments in financial instruments, for possible impairment at least annually or whenever there is an indication of impairment. If certain criteria are met, we are required to record an impairment charge.

With respect to assets, we recognized impairment charges of NT$308.1980.1 million, NT$258.1764.9 million and NT$888.2654.1 million (US$27.421.4 million) in 2014, 20152016, 2017 and 2016,2018, respectively, primarily as a result of an impairment chargecharges related to buildingsproperty, plant and improvement,equipment, equity method investments and impaired equipment and investment.goodwill. See “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates—Impairment of Tangible and Intangible Assets Other Than Goodwill,” “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates—Valuation of Investments” and “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates—Goodwill.”

We are unable to estimate the extent and timing of any impairment charges for future years and we cannot give any assurance that impairment charges will not be required in periods subsequent to December 31, 2016.2018. Any impairment charge could have a material adverse effect on our net income. The determination of an impairment charge at any given time is based significantly on our expected results of operations over a number of years in the future. As a result, an impairment charge is more likely to occur during a period in which our operating results and outlook are otherwise already depressed.

Provisions of our outstanding convertible bonds could discourage an acquisition of us by a third party.

In September 2013, we completed the offering of the 2018 Convertible Bonds, and in July 2015, we completed the offering of the 2018 NTD-linked Convertible Bonds. Certain provisions of our convertible bonds could make it more difficult or more expensive for a third party to acquire us. In the event that (1) our common shares cease to be listed on the TWSE; (2) any person or persons acting together acquire control of us if such person or persons do not have, and would not be deemed to have, control of us as of a specified date; (3) we consolidate with or merge into or sell or transfer all or substantially all of our assets to any other person, unless the consolidation, merger, sale or transfer will not result in the other person or persons acquiring control over us or the successor entity; or (4) one or more other persons acquire the legal or beneficial ownership of all or substantially all of our capital stock, holders of these bonds shall have the right to require us to repurchase all or any portion of the principal amount thereof (which is US$200,000 or any integral multiples thereof) of such holder’s bonds. “Control” means the right to appoint and/or remove all or the majority of the members of our board of directors or other governing body, whether obtained directly or indirectly, and whether obtained by ownership of share capital, the possession of voting rights, contract or otherwise. However, a “change of control” will not be deemed to have occurred (i) solely as a result of the issuance or transfer, with the Company’s corporation, of any preferred shares in the Company’s capital or (ii) if the closing price per common share for any five trading days within the period of 10 consecutive trading days ending immediately after the later of the change of control or the public announcement of the change of control equals or exceeds 110% of the conversion price in effect on each of those five trading days.

The accounting treatment for our outstanding convertible bonds, including the treatment for conversion option, redemption option and put option embedded in our outstanding convertible bonds, could have a material effect on our reported financial results.

In September 2013, we completed the offering of the 2018 Convertible Bonds. Since the 2018 Convertible Bonds are denominated in U.S. dollars, which is different from our functional currency under IFRS, we separated the conversion option, redemption option and put option embedded in 2018 Convertible Bonds (collectively, the “Bond Options”) and recognized them as a freestanding derivative at fair value through profit or loss. To determine the fair value of the Bond Options of the 2018 Convertible Bonds, we are subject to a mark-to-market accounting on the Bond Options embedded in the 2018 Convertible Bonds. As a result, if the fair value of our common shares rises, mark to market of the Bond Options would lead to losses in our financial statements. For each reporting period over the term of the convertible bonds, a gain (or loss) will be reported in our consolidated statement of comprehensive income to the extent the fair value of the Bond Options changes from the previous period. Changes in fair value of the Bond Options generated a loss for NT$777.6 million, NT$112.0 million and a gain for NT$1,418.7 million (US$43.8 million) in 2014, 2015 and 2016, respectively. See note 19 to our audited consolidated financial statements included in this annual report.

Any failure to achieve and maintain effective internal controls could have a material adverse effect on our business and results of operations.

We are subject to reporting obligations under the U.S. securities laws. The SEC as required by Section 404 of the Sarbanes-Oxley Act of 2002 adopted rules requiring every public company to include a management report on the effectiveness of such company’s internal control over financial reporting in its annual report. In addition, an independent registered public accounting firm must report on such company’s internal control over financial reporting.

Our management concluded that our internal control over financial reporting was effective as of December 31, 20162018 and our independent registered public accounting firm has issued an attestation report concluding that our internal control over financial reporting was effective in all material aspects. As effective internal control over financial reporting is necessary for us to produce reliable financial reports and is important to help prevent fraud, any failure to maintain effective internal control over financial reporting could harm our business and result in a loss of investor confidence in the reliability of our financial statements, which in turn could negatively impact the trading price of our common shares and ADSs. Furthermore, we may need to incur additional costs and use additional management and other resources in an effort to comply with Section 404 of the Sarbanes-Oxley Act and other requirements going forward.

Our insurance coverage may be inadequate to cover all of our business risks.

Although we seek to obtain insurance for some of our main operational risks, the amount of our insurance coverage may not be adequate to cover all potential claims or liabilities, and we may be forced to bear substantial costs resulting from risks and uncertainties of our business. There is also no guarantee that we will be able to obtain insurance coverage when desired or that insurance will be available on commercially attractive terms. Any failure to obtain adequate insurance coverage on terms favorable to us, or at all, could have a material adverse effect on our business, financial condition and results of operations.

We could potentially face tax uncertainties arising from the decisions, activities, and operations undertaken by us.

There are many business activities that may give rise to tax issues in our daily operations, ranging from procurement, research and development activities, manufacturing to product storage and distribution, among other activities. Additional tax liabilities such as double taxation, inapplicability of tax incentives, tax adjustment and related interest and penalties may arise if all these tax issues are not dealt with properly. The development and evolution of tax laws and regulations present considerable uncertainties in interpretation and enforcement, which could call for more onerous compliance measures and tax audits in the jurisdictions in which we operate. Failure to comply with any change in tax laws could result in unfavorable tax consequences to us and have an adverse impact on our business, financial condition and results of operations.

Uncertainty under United States corporate income tax reform legislation could adversely affect our operating results and financial condition.

The United States recently enacted tax reform legislation (the “Tax Reform Legislation”) that, among other things, reduced the U.S. federal corporate income tax rate from 35% to 21% and imposes an alternative “base erosion and anti-abuse tax” (“BEAT”) on U.S. corporations that make deductible payments to foreign related persons in excess of specified amounts. The reduction in the U.S. federal corporate income tax rate is expected to be beneficial to us in future years in which our consolidated U.S. subsidiaries have net income subject to U.S. tax.

There are a number of uncertainties and ambiguities as to the interpretation and application of many of the provisions in the Tax Reform Legislation, including the provisions relating to the BEAT. In the absence of guidance on these issues, we will use what we believe are reasonable interpretations and assumptions in interpreting and applying the Tax Reform Legislation for purposes of determining our income tax payable and results of operations, which may change as we receive additional clarification and implementation guidance. It is also possible that the U.S. Internal Revenue Service could issue subsequent guidance or take positions on audit that differ from the interpretations and assumptions that we previously made, which could have a material adverse effect on our cash tax liabilities, results of operations and financial condition.

Risks Relating to Taiwan, ROCR.O.C.

Strained relations between the ROCR.O.C. and the PRCP.R.C. and disruptions in Taiwan’s political environment caused by domestic political events could negatively affect our business and the market value of your investment.

Our principal executive offices and our principal facilities are located in Taiwan and approximately 52.1%48.6%, 46.9%47.6% and 48.6%56.9% of our operating revenues in 2014, 20152016, 2017 and 2016,2018, respectively, were derived from our operations in Taiwan. Accordingly, our business and financial condition may be affected by changes in local governmental policies and political and social instability.

The ROCR.O.C. has a unique international political status. The government of the PRCP.R.C. asserts sovereignty over all of China, including Taiwan, and does not recognize the legitimacy of the ROCR.O.C. government. Although significant economic and cultural relations have been established in recent years between the ROCR.O.C. and the PRC,P.R.C., relations have often been strained. Any major change in the Taiwanese political environment, including the outcome of presidential or municipal elections, or potential shifts in government policy, may affect the direction of economic and political developments and negatively impact the economic and political environment in Taiwan. Past developments related to the interaction between the ROCR.O.C. and the PRC,P.R.C., domestic political events or election results have on occasion depressed the market prices of the securities of Taiwanese or Taiwan-related companies, including our own. Relations between the ROCR.O.C. and the PRCP.R.C. and other factors affecting the political or economic conditions in Taiwan could have a material adverse effect on our financial condition and results of operations, as well as the market price and the liquidity of our common shares and ADSs.

Currently, we manufacture interconnect materials in the PRCP.R.C. through our wholly owned subsidiary, ASE Shanghai. We also provide packaging and testing services in the PRCP.R.C. through some of our subsidiaries. In addition, we engage in the PRCP.R.C. in real estate development and the manufacture of computer peripherals and electronic components through our subsidiaries in the PRC.P.R.C. See “Item 4. Information on the Company—Organizational Structure—Our Consolidated Subsidiaries.” In the past, ROCR.O.C. companies, including ourselves, were prohibited from investing in facilities for the packaging and testing of semiconductors in the PRC.P.R.C. Although the prohibitions have been relaxed since February 2010, the ROCR.O.C. government currently still restricts certain types of investments by ROCR.O.C. companies, including ourselves, in the PRC.P.R.C. We do not know when or if such laws and policies governing investment in the PRCP.R.C. will be amended, and we cannot assure you that such ROCR.O.C. investment laws and policies will permit us to make further investments of certain types in the PRCP.R.C. in the future that we consider beneficial to us. Our growth prospects and profitability may be adversely affected if we are restricted from making certain additional investments in the PRCP.R.C. and are not able to fully capitalize on the growth of the semiconductor industry in the PRC.P.R.C.

As a substantial portion of our business and operations is located in Taiwan, we are vulnerable to earthquakes, typhoons, drought and other natural disasters, as well as power outages and other industrial incidents, which could severely disrupt the normal operation of our business and adversely affect our results of operations.

Taiwan is susceptible to earthquakes and has experienced severe earthquakes which caused significant property damage and loss of life, particularly in the central and eastern parts of Taiwan. Earthquakes have damaged production facilities and adversely affected the operations of many companies involved in the semiconductor and other industries. For example, in February 2016, an earthquake measuring 6.4 on the Richter magnitude scale occurred in Kaohsiung caused several death and property damages. However, the earthquake did not have a material impact on our operations. We have never experienced structural damage to our facilities or damage to our machinery and equipment as a result of these earthquakes. In the past, however, we have experienced interruptions to our production schedule primarily as a result of power outages caused by earthquakes.

Taiwan is also susceptible to typhoons, which may cause damage and business interruptions to companies with facilities located in Taiwan. For example, on September 14, 2016, Taiwan experienced severe damage from typhoon Meranti that caused severe flooding, extensive property damage and loss of electricity for thousands of households. Taiwan has experienced severe droughts in the past. Although we have not been directly affected by droughts, we are dependent upon water for our packaging and substrates operations and a drought could interrupt such operations. In addition, a drought could interrupt the manufacturing process of the foundries located in Taiwan, in turn disrupting some of our customers’ production, which could result in a decline in the demand for our services. In addition, the supply of electrical power in Taiwan, which is primarily provided by Taiwan Power Company, the state-owned electric utility, is susceptible to disruption that could be prolonged and frequent, caused by overload as a result of high demand or other reasons.

Kaohsiung is one of the major industrial cities in Taiwan. Our testing and packaging businesses have been founded in Kaohsiung and currently our primary testing and packaging operations are located in Kaohsiung. In July 2014, following leaks from underground propene pipes, a series of propene pipeline explosions occurred in the Cian-Jhen and Ling-Ya districts of Kaohsiung. 32 people were killed and 321 others were injured from this incident. Although we have not been directly affected by the explosion, future industrial incidents could negatively affect our operation and result in interruption or delay of our operation or production capacity.

On August 15, 2017, Taiwan suffered a massive power blackout, which left millions of homes, offices and factories without power. Although the power blackout did not have a material impact on our operations, future power blackout may disrupt our business operations and adversely affect our results of operations.

Our production facilities as well as many of our suppliers and customers and providers of complementary semiconductor manufacturing services, including wafer foundries, are located in Taiwan. If our customers are affected by an earthquake, a typhoon, a drought or any other natural disasters, or power outage or other industrial incidents, it could result in a decline in the demand for our services. If our suppliers or providers of complementary semiconductor manufacturing services are affected, our production schedule could be interrupted or delayed. As a result, a major earthquake, typhoon, drought or other natural disaster in Taiwan, or a power outage or other industrial incident could severely disrupt the normal operation of our business and have a material adverse effect on our financial condition and results of operations.

We face risks related to health epidemics and outbreaks of contagious diseases, including H5N1 influenza, H7N9 influenza, H9N2 influenza, Severe Acute Respiratory Syndrome, or SARS, Middle East Respiratory Syndrome, or MERS, Ebola virus and Zika virus.

There have been reports of outbreaks of a highly pathogenic influenza caused by the H5N1, H7N9 and H9N2 viruses, in certain regions of Asia and other parts of the world. In recent years, Ebola virus disease broke out in West Africa, with a number of people having died of the disease in countries such as Guinea, Sierra Leone and Liberia. There are also cases of patients diagnosed with Ebola in the United States and Europe. In addition, Zika virus disease broke out in the Americas in 2015 and is currently ongoing, infecting people throughout South America, Central America, Mexico and the Caribbean. The disease is strongly linked to cases of microcephaly and Guillain–Barré syndrome in Brazil. An outbreak of such contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries. Additionally, a recurrence of SARS, a highly contagious form of atypical pneumonia, similar to the occurrence in 2003, which affected the PRC,P.R.C., Hong Kong, Taiwan, Singapore, Vietnam and certain other countries, and MERS, a viral respiratory infection which affected South Korea in 2015, would also have similar adverse effects. Since most of our operations and customers and suppliers are based in Asia (mainly in Taiwan and the PRC)P.R.C.), an outbreak of H5N1 influenza, H7N9 influenza, H9N2 influenza, SARS, MERS, Ebola, Zika virus or other contagious diseases in Asia or elsewhere, or the perception that such an outbreak could occur, and the measures taken by the governments of countries affected, including the ROCR.O.C. and the PRC,P.R.C., could adversely affect our business, financial condition or results of operations.

Escalation of tensions between South Korea and North Korea could have an adverse effect on our operations in South Korea and the market value of our shares.

Relationship between South Korea and North Korea have been tense throughout Korea’s modern history. The level of tension between the two Koreas has fluctuated and may increase abruptly as a result of current and future events. In recent years, there have been heighted security concerns stemming from North Korea’s nuclear weapons and ballistic missile programs and increased uncertainty regarding North Korea’s actions and possible responses from the international community.

Although we do not derive any revenue from, nor sell any products in, North Korea, any further increase in tensions between South Korea and North Korea that may occur, for example, if North Korea experiences a leadership crisis, high-level contacts between South Korea and North Korea break down, or military hostilities occur, could have a material adverse effect on the South Korea economy and on our South Korea subsidiary, our business, financial condition, results of operations and the market value of our common stock.

Any attempt by the U.S. government to withdraw from or materially modify existing international trade agreements or take further actions against certain P.R.C. technology companies could adversely affect our business, financial condition and results of operations.

The United StatesU.S. is currently undergoing major political changes, which has created uncertainty regarding future U.S. trade policies. DuringThe United States government has made certain comments that suggest the election campaign, the then president-elect Trump made comments suggesting that he wasU.S. is not supportive of certain existing international trade agreements.agreements, such as the North America Free Trade Agreement. The United States government has also issued executive orders to withdraw the U.S. from the Trans-Pacific Partnership. The United States government has shown inclinations to withdraw the U.S. from the World Trade Organization, which can lead to greater economic instability. In addition, the United States government has also escalated disputes with certain P.R.C. technology companies, some of which are our clients, over issues in cybersecurity. Since mid-2018, political tension has increased between the U.S. and the P.R.C. and has escalated into a tariff war; this may negatively affect our business operations in the U.S and the P.R.C. At this time, it remains unclear what actions, if any, the new administration would or would not doUnited States government will take with respect to theseother existing international trade agreements. However, ifIf the new administration takes actionU.S. were to withdraw from or materially modify thesecertain international trade agreements to which it is a party, or if tariffs continue to be raised on foreign-sourced goods imported to the U.S., our U.S. customers may seek new suppliers in the U.S. or other countries, and our business, financial condition and results of operations could be adversely affected.

Risks Relating to Ownership of Our Common Shares and the ADSs

The market for our common shares and the ADSs may not be liquid.

Active, liquid trading markets generally result in lower price volatility and more efficient execution of buy and sell orders for investors, compared to less active and less liquid markets. Liquidity of a securities market is often a function of the volume of the underlying shares that are publicly held by unrelated parties.

There has been no trading market outside the ROCR.O.C. for our common shares and the only trading market for our common shares is the TWSE. The outstanding ADSs are listed on the NYSE. There is no assurance that the market for our common shares or the ADSs will be active or liquid.

Although ADS holders are entitled to withdraw our common shares underlying the ADSs from the depositary at any time, ROCR.O.C. law requires that our common shares be held in an account in the ROCR.O.C. or sold for the benefit of the holder on the TWSE. In connection with any withdrawal of common shares from our ADS facility, the ADSs evidencing these common shares will be cancelled. Unless additional ADSs are issued, the effect of withdrawals will be to reduce the number of outstanding ADSs. If a significant number of withdrawals are effected, the liquidity of our ADSs will be substantially reduced. We cannot assure you that the ADS depositary will be able to arrange for a sale of deposited shares in a timely manner or at a specified price, particularly during periods of illiquidity or volatility.

If a non-ROCnon-R.O.C. holder of ADSs withdraws and holds common shares, such holder of ADSs will be required to appoint a tax guarantor, local agent and custodian in the ROCR.O.C. and register with the TWSE or the Taipei Exchange in order to buy and sell securities on the TWSE.

When a non-ROCnon-R.O.C. holder of ADSs elects to withdraw and hold common shares represented by ADSs, such holder of the ADSs will be required to appoint an agent for filing tax returns and making tax payments in the ROC.R.O.C. Such agent will be required to meet the qualifications set by the ROCR.O.C. Ministry of Finance and, upon appointment, becomes the guarantor of the withdrawing holder’s tax payment obligations. Evidence of the appointment of a tax guarantor, the approval of such appointment by the ROCR.O.C. tax authorities and tax clearance certificates or evidentiary documents issued by such tax guarantor may be required as conditions to such holder repatriating the profits derived from the sale of common shares. We cannot assure you that a withdrawing holder will be able to appoint, and obtain approval for, a tax guarantor in a timely manner.

In addition, under current ROCR.O.C. law, such withdrawing holder is required to register with the TWSE or the Taipei Exchange and appoint a local agent in the ROCR.O.C. to, among other things, open a bank account and open a securities trading account with a local securities brokerage firm, pay taxes, remit funds and exercise such holder’s rights as a shareholder. Furthermore, such withdrawing holder must appoint a local bank or a local securities firm to act as custodian for confirmation and settlement of trades, safekeeping of securities and cash proceeds and reporting and declaration of information. Without satisfying these requirements, non-ROCnon-R.O.C. withdrawing holders of ADSs would not be able to hold or otherwise subsequently sell our common shares on the TWSE or otherwise.

Pursuant to Mainland Investors Regulations, only QDIIs or persons that have otherwise obtained the approval from the MOEAIC and registered with the TWSE are permitted to withdraw and hold our shares from a depositary receipt facility. In order to hold our shares, such QDIIs are required to appoint an agent and custodian as required by the Mainland Investors Regulations. If the aggregate amount of our shares held by any QDII or shares received by any QDII upon a single withdrawal or in the aggregate accounts for 10.0% of our total issued and outstanding shares, such QDII must obtain the prior approval from the MOEAIC. We cannot assure you that such approval would be granted.

The market value of your investment may fluctuate due to the volatility of the ROCR.O.C. securities market.

The trading price of our ADSs may be affected by the trading price of our common shares on the TWSE. The ROCR.O.C. securities market is smaller and more volatile than the securities markets in the United States and in many European countries. The TWSE has experienced substantial fluctuations in the prices and volumes of sales of listed

securities and there are currently limits on the range of daily price movements on the TWSE. The TWSE Index peaked at 12,495.3 in February 1990, and subsequently fell to a low of 2,560.5 in October 1990. On March 13, 2000, the Taiwan Stock Exchange Index experienced a 617-point drop, which represented the single largest decrease in the Taiwan Stock Exchange Index in its history. During the period from January 1, 20162018 to December 31, 2016,2018, the Taiwan Stock Exchange Index peaked at 9,392.6811,235.11 on December 9, 2016,January 23, 2018, and reached a low of 7,664.019,478.99 on December 26, 2018. During the period from January 21, 2016. Over1, 2018 to April 17, 2018, the sametrading price of ASE’s common shares ranged from NT$46.10 per share to NT$37.50 per share. The last trading day for ASE’s common shares was on April 17, 2018. The common shares of ASEH have begun trading since April 30, 2018. During the period from April 30, 2018 to December 31, 2018, the trading price of our common shares ranged from NT$39.9084.60 per share to NT$28.1056.10 per share. On April 14, 2017,19, 2019, the Taiwan Stock Exchange Index closed at 9,732.93,10,968.50 and the closing value of our common shares was NT$37.8575.50 per share.

The TWSE is particularly volatile during times of political instability, including when relations between Taiwan and the PRCP.R.C. are strained. Several investment funds affiliated with the ROCR.O.C. government have also from time to time purchased securities from the TWSE to support the trading level of the TWSE. Moreover, the TWSE has experienced problems such as market manipulation, insider trading and settlement defaults. The recurrence of these or similar problems could have an adverse effect on the market price and liquidity of the securities of ROCR.O.C. companies, including our common shares and ADSs, in both the domestic and international markets.

We may not continue to declare cash dividends in any particular amount.

We intend to continue to pay dividends. However, future dividends may be affected by, among other things, the best interests of our company and our shareholders, our results of operations, cash balances and future cash requirements, financial condition, investments and acquisitions, legal risks, and other factors that the board of directors may consider relevant. Our dividend payments may change from time to time, and we cannot assure that we will continue to declare dividends in any particular amounts. A reduction in, a delay of, or elimination of our dividend payments could adversely affect our share price.

Holders of common shares and ADSs may experience dilution if we issue stock bonuses and stock options to employees or sell additional equity or equity-linked securities.

Similar to other ROCR.O.C. technology companies, we issue bonuses from time to time in the form of common shares. Prior to 2009, bonuses issued in the form of our common shares were valued at par. Beginning in 2009, bonuses in the form of our common shares are valued at the closing price of our common shares on the day prior to our shareholders’ meeting. In addition, under the ROCR.O.C. Company Law we may, upon approval from our board of directors and the ROCR.O.C. Securities and Futures Bureau of the FSC, establish employee stock option plans provided that shareholders’ approval is required if the exercise price of an option would be less than the closing price of our common shares on the TWSE on the grant date of the option. ASE Inc.maintained 2010 and 2015 employee stock option plans before the combination with SPIL.

ASEH assumed ASE’s obligations for employee share options that were issued before the execution of the Joint Share Exchange Agreement on April 30, 2018; all terms and conditions of the issued ASE share options remain the same, except that each ASE share option represents the right to purchase 0.5 ordinary share of ASEH.

In August 2018, our board of directors and FSC both approved the ASEH first employee share option plan. As a result, ASEH currently maintains three employee stock option plans pursuant to which our full-time employees, including our domestic and foreign subsidiaries, are eligible to receive stock option grants. As of December 31, 2016, 210,794,6002018, a total of 188,718,350 options assumed and granted by ASEH were outstanding, 56,855,850 of which were assumed from ASE Inc. were outstanding. Our boardand 131,862,500 of directors and the FSC approved the 5^th employee share option plans in December 2014 and April 2015, respectively, under which 94,270,000 options were granted in September 2015.by ASEH. See “Item 6. Directors, Senior Management and Employees—Compensation—ASE Inc.ASEH Employee BonusCompensation and Stock Option Plans.” The issuance of our common shares pursuant to stock bonuses or stock options may have a dilutive effect on the holders of outstanding common shares and ADSs.

In addition, the sale of additional equity or equity-linked securities may result in additional dilution to our shareholders. In September 2013, weASE issued 2018 Convertible Bonds to fund procurement of raw materials from overseas. The bonds are convertible by holders at any time on or after October 16, 2013 and up to (and including) August 26, 2018. As of December 31, 2016, none of the bonds has been converted into our common shares, and the balance of the outstanding bonds was US$400.0 million. The initial conversion price was NT$33.085 per common share, subject to adjustment upon the occurrence of certain events, such as the 2013 Capital Increase, the 2017 Capital Increase and cash dividend distribution. As of the date of this annual report, the conversion price is NT$28.96 per common share. Upon full conversion, the outstanding bonds will be converted into 413,756,906 common shares if based on the current conversion price, representing 5.2% of our outstanding shares at the end of December 31, 2016. Any conversion of bonds, in full or in part, would dilute the ownership interest of our existing shareholders and our earnings per share and could adversely affect the market price of our ADSs. Moreover,The bondholders have exercised conversion rights to convert 2018 Convertible Bonds of US$399.6 million into 424,258,000 common shares at conversion prices ranging from NT$27.95 to NT$28.96 per common share. The converted common shares represented 5% of our outstanding shares as of December 31, 2017. In the third quarter of 2017, the closing price of our common shares (translated into U.S. dollars at the prevailing rates) for a period of 20 consecutive trading days was higher than 130% of the conversion price in U.S. dollar translated at the fixed exchange rate of US$1 to NT$29.956 determined on pricing date per common share. As a result, ASE redeemed the outstanding 2018 Convertible Bonds of US$0.4 million in September 2017. In July 2015,ASE issued 2018 NTD-linked Convertible Bonds to fund procurement of equipment from overseas. The NTD-linked Convertible Bonds are zero coupon bonds with a maturity of 2.75 years. The initial conversion price was NT$54.5465 per common share, subject to certain adjustments, determined on the basis of a fixed exchange rate of NT$30.928 = US$1.00 (which represents an approximately 27.0% conversion premium over the closing trading price of our common shares on June 25, 2015 of NT$42.95 per common share). The bonds expired in March 2018 and none have been exercised. ASE redeemed the Currency Linked Bonds in cash in an amount by converting the par value into New Taiwan dollar amount using a fixed exchange rate of US$1 to NT$30.928 and then back to U.S. dollar amount using the applicable prevailing rate at the time of redemption on March 27, 2018. As of the date of this annual report, there is no convertible bond held by the Company.

In September 2013, weASE issued 130,000,000 common shares for public subscription, which was effected by way of an increase in our authorized share capital in the amount of NT$1,300.0 million. Moreover, in March 2017, ASE granted rights to the record holders of our existing common shares to subscribe for an aggregate of 240,000,000 of our common shares, par value NT$10.0 per share (the “Rights Offering”). Substantially concurrently with the Rights Offering, ASE also offered 30,000,000 of our common shares to our employees (the “Employee Offering”) and offered 30,000,000 of our common shares to the public in Taiwan (the “Taiwan Public Offering”, together with the Rights Offering and the Employee Offering, the “2017 Capital Increase”). The issuance of the zero coupon convertible bonds due 2018 and the Capital Increaseadditional equity or equity-linked securities could cause dilution to our ADS holders.

Restrictions on the ability to deposit our common shares into our ADS facility may adversely affect the liquidity and price of our ADSs.

The ability to deposit common shares into our ADS facility is restricted by ROCR.O.C. law. A significant number of withdrawals of common shares underlying our ADSs would reduce the liquidity of the ADSs by reducing the number of ADSs outstanding. As a result, the prevailing market price of our ADSs may differ from the prevailing market price of our common shares on the TWSE. Under current ROCR.O.C. law, no person or entity, including you and us, may deposit our common shares in our ADS facility without specific approval of the FSC, unless:

With respect to item (4) above, the depositary may issue ADSs against the deposit of those common shares only if the total number of ADSs outstanding following the deposit will not exceed the number of ADSs previously approved by the FSC, plus any ADSs issued pursuant to the events described in items (1), (2) and (3) above.

In addition, in the case of a deposit of our common shares requested under item (4) above, the depositary will refuse to accept deposit of our common shares if such deposit is not permitted under any legal, regulatory or other restrictions notified by us to the depositary from time to time, which restrictions may include blackout periods during which deposits may not be made, minimum and maximum amounts and frequency of deposits.

The depositary will not offer holders of ADSs preemptive rights unless the distribution of both the rights and the underlying common shares to our ADS holders are either registered under the Securities Act or exempt from registration under the Securities Act.

Holders of ADSs will not have the same voting rights as our shareholders, which may affect the value of their ADSs.

The voting rights of a holder of ADSs as to our common shares represented by its ADSs are governed by the deposit agreement. Holders of ADSs will not be able to exercise voting rights on an individual basis. If holders representing at least 51% of the ADSs outstanding at the relevant record date instruct the depositary to vote in the same manner regarding a resolution, including the election of directors, the depositary will cause all common shares represented by the ADSs to be voted in that manner. If the depositary does not receive timely instructions representing at least 51% of the ADSs outstanding at the relevant record date to vote in the same manner for any resolution, including the election of directors, holders of ADSs will be deemed to have instructed the depositary or its nominee to authorize all our common shares represented by the ADSs to be voted at the discretion of our chairman or his designee, which may not be in the interest of holders of ADSs. Moreover, while shareholders who own 1% or more of our outstanding shares are entitled to submit one proposal to be considered at our annual general meetings of shareholders, only holders representing at least 51% of our ADSs outstanding at the relevant record date are entitled to submit one proposal to be considered at our annual general meetings of shareholders. Hence, only one proposal may be submitted on behalf of all ADS holders.

The right of holders of ADSs to participate in our rights offerings is limited, which could cause dilution to your holdings.

We may from time to time distribute rights to our shareholders, including rights to acquire our securities. Under the deposit agreement, the depositary will not offer holders of ADSs those rights unless both the distribution of the rights and the underlying securities to all our ADS holders are either registered under the Securities Act or exempt from registration under the Securities Act. Although we may be eligible to take advantage of certain exemptions under the Securities Act available to certain foreign issuers for rights offerings, we can give no assurances that we will be able to establish an exemption from registration under the Securities Act, and we are under no obligation to file a registration statement for any of these rights. Accordingly, holders of ADSs may be unable to participate in our rights offerings and may experience dilution of their holdings.

If the depositary is unable to sell rights that are not exercised or not distributed or if the sale is not lawful or reasonably practicable, it will allow the rights to lapse, in which case holders of ADSs will receive no value for these rights.

For example, in March 2017, we granted rights to the record holders of our existing common shares to subscribe for an aggregate of 240,000,000 of our common shares (the “New Shares”), while the holders of ADSs were not given rights to subscribe for new ADSs and do not have the right to instruct the depositary to subscribe for the New Shares on their behalf. If a holder of ADSs wants the rights corresponding to the common shares underlying such ADSs to be exercised, such holder needs to surrender the ADSs to the depositary and instruct the depositary to deliver the underlying common shares to a securities brokerage account in Taiwan specified by such holder.

Changes in exchange controls, which restrict your ability to convert proceeds received from your ownership of ADSs, may have an adverse effect on the value of your investment.

Under current ROCR.O.C. law, the depositary, without obtaining approvals from the Central Bank of the Republic of China (Taiwan) or any other governmental authority or agency of the ROC,R.O.C., may convert NT dollars into other currencies, including U.S. dollars, for:

In addition, the depositary may also convert into NT dollars incoming payments for purchases of common shares for deposit in the ADS facility against the creation of additional ADSs. The depositary may be required to obtain foreign exchange approval from the Central Bank of the Republic of China (Taiwan) on a payment-by-payment basis for conversion from NT dollars into foreign currencies of the proceeds from the sale of subscription rights for new common shares. Although it is expected that the Central Bank of the Republic of China (Taiwan) will grant this approval as a routine matter, we cannot assure you that in the future any approval will be obtained in a timely manner, or at all.

Under the ROCR.O.C. Foreign Exchange Control Law,Act, the Executive Yuan of the ROCR.O.C. government may, without prior notice but subject to subsequent legislative approval, impose foreign exchange controls in the event of, among other things, a material change in international economic conditions. We cannot assure you that foreign exchange controls or other restrictions will not be introduced in the future.

The value of your investment may be reduced by possible future sales of common shares or ADSs by us or our shareholders.

While we are not aware of any plans by any major shareholders to dispose of significant numbers of common shares, we cannot assure you that one or more existing shareholders or owners of securities convertible or exchangeable into or exercisable for our common shares or ADSs will not dispose of significant numbers of common shares or ADSs. In addition, several of our subsidiaries and affiliates hold common shares, depositary shares representing common shares and options to purchase common shares or ADSs. They may decide to sell those securities in the future. See “Item 7. Major Shareholders and Related Party Transactions—Major Shareholders” for a description of our significant shareholders and affiliates that hold our common shares.

We cannot predict the effect, if any, that future sales of common shares or ADSs, or the availability of common shares or ADSs for future sale, will have on the market price of our common shares or the ADSs prevailing from time to time. Sales of substantial numbers of common shares or ADSs in the public market, or the perception that such sales may occur, could depress the prevailing market prices of our common shares or the ADSs.

Item 4. Information on the Company

HISTORY AND DEVELOPMENT OF THE COMPANY

Advanced Semiconductor Engineering, Inc.As mentioned in Item 3. Key Information—Selected Financial Data, ASE Technology Holding Co.,Ltd. was incorporatedjointly established on March 23, 1984April 30, 2018 as a company limited by shares under the ROCR.O.C. Company Law, with facilities inby the Nantze Export Processing Zonecombination of Advanced Semiconductor Engineering, Inc., which was incoporated on March 23, 1984 and Siliconware Precision Industries Co., Ltd., which was incoporated on May 17, 1984.

As of January 31, 2019, ASEH directly controls ASE, SPIL, and USI Group. ASEH’s manufacturing facilties are located in Kaohsiung, Taiwan.Taiwan, China, South Korea, Japan, Singapore, Malaysia, Mexico, America and Europe. Our principal executive offices are located at 26 Chin Third Road, Nantze Export Processing Zone, Nantze, Kaohsiung, Taiwan, ROCR.O.C. and our telephone number at the above address is (886) 7-361-7131. Our common shares have been listed on the TWSE under the symbol “2311” since July 1989,“3711” and ADSs representing our common shares have been listed on the NYSE under the same ticker symbol “ASX” since September 2000.April 2018.

Acquisition of Common Shares and American Depositary Shares of SPIL

In August 2015, weASE announced an offer to purchase 779,000,000 common shares (including those represented by American depositary shares) of SPIL through concurrent tender offers in the ROCR.O.C. and the U.S., at a price of NT$45 per SPIL common share and NT$225 per SPIL American depositary share. The Initial SPIL Tender Offer expired on September 22, 2015, with 1,147,898,165 common shares (including those represented by American depositary shares) validly tendered and not validly withdrawn, exceeding the offer cap, and as a result, after proration, 725,749,060 SPIL common shares and 10,650,188 SPIL American depositary shares were accepted for purchase. On October 1, 2015, weASE became a shareholder holding approximately 24.99% of the issued and outstanding share capital in SPIL.

In December 2015, following an announcement by SPIL that it plans to issue 1,033 million shares, if approved by SPIL shareholders, to a third party pursuant to a share placement agreement, weASE submitted a written proposal to SPIL’s Board proposing to acquire all SPIL shares not otherwise owned by ASE, contingent upon the termination of the share placement agreement. The board of directors of SPIL did not respond to our acquisition proposal. Subsequently, weASE launched an offer to purchase 770,000,000 common shares (including those represented by American depositary shares) of SPIL through concurrent tender offers in the ROCR.O.C. and the U.S., at a price of NT$55 per SPIL common share and NT$275 per SPIL American depositary share. The Second SPIL Tender Offer expired on March 17, 2016. Because the TFTC did not render a decision before the expiration of the Second SPIL Tender Offer, resulting in the failure to satisfy one of the tender offer conditions, the Second SPIL Tender Offer was not successful. The TFTC subsequently suspended its review on March 23, 2016.

Notwithstanding the failure of the Second SPIL Tender Offer, weASE continued to seek control of SPIL, with the purpose of effecting an acquisition of 100% of the common shares and American depositary shares of SPIL. Simultaneously with the acquisition of SPIL, weASE planned to establish a holding company in Taiwan that would hold 100% of the equity interests of both ASE and SPIL such that ASE and SPIL would be wholly owned subsidiaries of such holding company, which would maintain all current operations of ASE and SPIL in Taiwan.SPIL.

In March and April 2016, weASE acquired an additional 258,300,000 common shares of SPIL (including those represented by American depositary shares) through open market purchases.

In June 2016, weASE entered into the Joint Share Exchange Agreement with SPIL, pursuant to which a holding company, ASE Holding will beASEH was formed by means of a statutory share exchange pursuant to the laws of the Republic of China, and ASE Holding willASEH (i) acquireacquired all issued shares of ASE in exchange for shares of ASE Holding,ASEH, and (ii) acquireacquired all issued shares of SPIL using cash consideration (the “Share Exchange”). Upon the consummationconsideration.

On January 16, 2018, ASE converted 9,690,452 American depositary shares of the Share Exchange,SPIL that it owned into 48,452,260 common shares.

On February 12, 2018, ASE and SPIL will becomerespectively held extraordinary general shareholders’ meetings and each approved the proposed Joint Share Exchange, pursuant to which, ASEH acquires 100% of both ASE and SPIL shares.

The Share Exchange consummated on April 30, 2018, and ASE and SPIL became privately held and wholly owned subsidiaries of ASE HoldingASEH concurrently. Subject to the Share Exchange, the Joint Share Exchange Agreement and the other transactions contemplated thereby being approved by shareholders of ASE and SPIL, and upon the satisfaction of the other conditions for completing the Share Exchange, ASE Holding will be formed. The common shares of ASE will beand SPIL were delisted from the TWSE and thetheir respective ADSs will bewere delisted from NYSE and will become eligible for deregistration under the Exchange Act. NASDAQ.

The common shares of ASE Holding will beASEH are now listed on the TWSE and beginhave begun trading in Taiwan during TWSE trading hours onunder the effective date of the Share Exchange (the “Effective Date”)stock symbol “3711”, and the ADSs of ASE Holding will beASEH are now listed on the NYSE and beginhave begun trading in the U.S. during NYSE trading hours onunder the Effective Date.same ticker symbol “ASX”.

Since the description of the attributes of common shares in the share capital provisions of the Articles of Incorporation of ASE and ASE Holding will be substantially similar, there are no material differences between the rights of holders of the common shares of ASE and ASE Holding from a legal perspective. However, the common shares and ADSs of ASE will be suspended from trading on the TWSE and NYSE, respectively, starting from the eighth ROC Trading Day before the Effective Date. The holders of the common shares and ADSs of ASE will not be able to trade those shares or ADSs, or the common shares and ADSs of ASE Holding they will be entitled to receive from the date of such suspension to the Effective Date. Accordingly, these holders will be subject to the risk of not being able to liquidate their shares during this trading gap period.

As of March 31, 2017, SPIL had an aggregate of 3,116,361,139 common shares, including 187,275,560 common shares represented by American depositary shares, issued and outstanding, and we beneficially owned 988,847,740 common shares and 9,690,452 American depositary shares of SPIL. There were no public takeover offers by third parties of ASE’s shares which occurred in 2016.

USI Group Restructuring

In April 2015, our subsidiary Universal Scientific Industrial completed a spin-off of its subsidiaries to USI Inc. As a result of such spin-off, as of April 1, 2015, ASE Inc. held approximately 99.01% of Universal Scientific Industrial and approximately 99.17% of USI Inc.

Universal Scientific Industrial, USI Inc. and USI Inc.’s directly and indirectly held subsidiaries (collectively, the “USI Group”) primarily engage in electronic manufacturing services in relation to computers,computing and storage, consumer electronics, communications, industrial and automotive, among other services and businesses. As part of our corporate reorganization to align each business function to different legal entity groups, the board of directors of ASE Inc. passed a resolution on September 24, 2015 and approved the sale of all ASE Inc.’sASE’s shareholding in Universal Scientific Industrial to UGTW, an indirectly held subsidiary of USI Inc., which will result in USI Inc. indirectly holding Universal Scientific Industrial (the “Universal Scientific Industrial Share Transfer”). The Universal Scientific Industrial Share Transfer was approved by the Investment Commission of MOEA on February 3, 2016. The majority of ASE Inc.’sASE’s shares in Universal Scientific Industrial were transferred to UGTW in March 2016, and the remaining shares were transferred in May 2016.

To increase operational flexibility through organizational restructure, ASE’s board of directors resolved in October 2018 to spin off its investment department, which is responsible for managing the ordinary shares and assets of USI Inc. as well as relevant assets into a newly-established company, USI Global Inc. (“USI Global”). USI Global issued 30,000,000 new ordinary shares to ASEH as consideration for the spin-off. The spin-off consummated in November 2018 and ASEH obtained control over ASE and USI Global. In December 2018, the board of directors of ASEH and USI Global resolved to merge and the merger consummated in January 2019. ASEH became the surviving company from the merger and USI Global was dissolved after the merger. After the merger, ASEH directly held 100.0% of the outstanding shares of USI Inc. The aforementioned USI Global spin off and merger have no material effect on our financial and operational results.

Capital Expenditures

Our principal capital expenditures for the years ended December 31, 2014, 20152016, 2017 and 20162018 have been for machinery and equipment procurements and investments in buildings and improvement in connection with the expansion of our capacity expansion, for which we spent NT$43,448.6 27,680.9 million, NT$28,280.8 23,677.7 million and NT$27,680.939,092.2 million (US$854.31,277.1 million), respectively. We had commitments for capital expenditures of approximately US$204.7NT$17,039.5 million (US$556.7 million), of which US$20.6NT$2,339.3 million (US$76.4 million) had been paid as of December 31, 2016,2018, mainly in connection with the expansion of our packaging and testing services operations primarily in the ROCR.O.C. and the PRC.P.R.C. Any future expansion of our operating activities could result in additional capital expenditures. We anticipate our capital expenditures in 20172019 will be financed through our existing cash, marketable securities, expected cash flow from operations and existing credit lines under our loan facilities and will consist of, among other things, additional machinery and equipment procurements for our capacity expansions. See “Item 5. Operating and Financial Review and Prospects—Liquidity and Capital Resources” for more information. Other than the 100% acquisition of SPIL common shares and American depositary shares of SPILDepositary Shares by way of the Initial SPIL Tender Offer, the Share Exchange pursuant to the Joint Share Exchange Agreement and through open market purchases, there were no significant financial investments or divestitures in 2014, 20152016, 2017 and 2016.2018. See “Item 4. Information on the Company—History and Development of the Company—Acquisition of Common Shares and American Depositary Shares of SPIL” for information.

For more information on our history and development, see “—Organizational Structure.”

BUSINESS OVERVIEW

ASEASEH is among the world’sa leading companiesprovider of semiconductor manufacturing services in semiconductor packagingassembly and testing sector.testing. Our services include semiconductor packaging, production of interconnect materials, front-end engineering testing, wafer probing and final testing services, as well as integrated solutions for electronic manufacturing services in relation to computers and storage, peripherals, communications, industrial, automotive, and storage and server applications.

We believe that, as a result of the following strengths, we are able to compete effectively to meet customers’ requirements across a wide range of end-use applications:

We believe that it is still the trend for semiconductor companies to outsource their packaging, testing and manufacturing requirements as semiconductor companies rely on independent providers of foundry, packaging and testing and electronic manufacturing services. In response to the increased pace of new product development and shortened product life and production cycles, semiconductor companies are increasingly seeking both independent packaging and testing companies that can provide turnkey services in order to reduce time-to-market and electronic manufacturing companies with proactive original design capabilities that can provide large-scale production. We believe that our technological expertise and scale and our ability to integrate our broad range of solutions into turnkey services and electronic manufacturing services allow us to benefit from the accelerated outsourcing trend and better serve our existing and potential customers.

We believe that we have benefited, and will continue to benefit, from our geographic location in Taiwan. Taiwan is currently the largest center for outsourced semiconductor manufacturing in the world and has a high concentration of electronic manufacturing service providers. Our close proximity to foundries and other providers of complementary semiconductor manufacturing services is attractive to our customers who wish to take advantage of the efficiencies of a total semiconductor manufacturing solution by outsourcing several stages of their manufacturing requirements. We believe that, as a result, we are well positioned to meet the advanced semiconductor engineering and manufacturing requirements of our customers.

Industry Background

General

Semiconductors are the basic building blocks used to create an increasing variety of electronic products and systems. Continuous improvements in semiconductor process and design technologies have led to smaller, more complex and more reliable semiconductors at a lower cost per function. These improvements have resulted in significant performance and price benefits to manufacturers of electronic products. As a result, semiconductor demand has grown substantially in our primary end-user markets for communications, computing and consumer electronics, and has experienced increased growth in other markets such as automotive products and industrial automation and control systems.

The semiconductor industry is characterized by strong long-term growth, with periodic and sometimes severe cyclical downturns. The Semiconductor Industry Association reported that worldwide sales of semiconductors increased from approximately US$51.0 billion in 1990 to approximately US$338.9468.8 billion in 2016.2018. We believe that overall growth and cyclical fluctuations will continue over the long-term in the semiconductor industry.

Electronic Manufacturing Services

Electronic manufacturing service providers typically achieve large economies of scale in manufacturing by pooling together product design techniques and also provide value-added services such as warranties and repairs. Companies who do not need to manufacture a constant supply of products have increasingly outsourced their manufacturing to these service providers so that they can respond quickly and efficiently to sudden spikes in demand without having to maintain large inventories of products.

Electronic manufacturing services are sought by companies in a wide range of industries including, among others, information, communications, computers and storage, consumer electronics, automotive electronics, medical treatment, industrial applications, aviation, navigation, national defense and transportation. Although affected by global economic fluctuations, we expect the electronic manufacturing services industry to continue to grow in the long-term, and we have enhanced our presence in the industry since 2010 through our acquisition of a controlling interest in Universal Scientific.Scientific Industrial and acquisition of all the shares of USI Inc. in September 2018.

Outsourcing Trends in Semiconductor Manufacturing

Historically, semiconductor companies designed, manufactured, packaged and tested semiconductors primarily within their own facilities. However, there is a clear trend in the industry to outsource the manufacturing process. Virtually every significant stage of the manufacturing process can be outsourced. Wafer foundry services, semiconductor packaging and testing services, and electronic manufacturing services are currently the largest segments of the independent semiconductor manufacturing services market.

The availability of technologically advanced independent manufacturing services has also enabled the growth of “fabless” semiconductor companies that focus on semiconductor design and marketing, while outsourcing their wafer fabrication, packaging and testing requirements to independent companies. We believe that the growth in the number and scale of fabless semiconductor companies that rely solely on independent companies to meet their manufacturing requirements will continue to be a driver of growth for us. Similarly, the availability of technologically advanced independent manufacturing services has encouraged integrated device manufacturers, which traditionally have relied on in-house semiconductor manufacturing capacity, to increasingly outsource their manufacturing requirements to independent semiconductor manufacturing companies.

We believe the outsourcing of semiconductor manufacturing services will increase in the future for many reasons, including the following:

Some semiconductor companies with in-house operations are under increasing pressure to rationalize these operations by relocating to locations with lower costs or better infrastructure, in order to lower manufacturing costs and shorten production cycle time. We expect semiconductor companies to increasingly outsource their requirements to take advantage of the advanced technology and scale of operations of independent packaging and testing companies and electronic manufacturing services providers.

Trends of Mergers and Acquisitions in the Semiconductor Industry

The global semiconductor industry is highly competitive, and such competitive landscape is changing as a result of a trend toward consolidation within the industry. In particular, packaging and testing service providers in the semiconductor industry have engaged in cross-border mergers and acquisitions in recent years as part of their expansion strategy, which has gradually changed the ecosystem of the semiconductor industry. Examples of mergers and acquisitions in recent years include mergers and acquisitions by and among semiconductor design companies or integrated device manufacturers, including Intel Corporation’s acquisition of Altera Corporation, ON Semiconductor Corporation’s acquisition of Fairchild Semiconductor International, Inc., NXP Semiconductors N.V.’s acquisition of Freescale Semiconductor, Inc., Avago Technologies Ltd.’s acquisition of Broadcom Corporation, and several acquisitions of semiconductor design companies by MediaTek, Inc., Bain Capital’s acquisition of Toshiba Corporation’s memory chip business, Microchip Technology Inc.’s acquisition of Atmel Corporation and Microsemi Corporation, Qualcomm Incorporated’s attempted acquisition of NXP Semiconductors, and Broadcom Limited’s attempted acquisition of Qualcomm Incorporated. Examples of mergers and acquisitions by and among semiconductor packaging and testing companies, including Jiangsu Changjiang Electronics Technology Co., Ltd.’s acquisition of STATS ChipPAC Ltd., Nantong Fujitsu Microelectronics Co., Ltd.’s acquisition of the packaging and testing factory of Advanced Micro Devices, Inc. and, Amkor Technology, Inc.’s acquisition of J-Devices Corporation.

As a result of the aforementioned mergers and acquisitions, our competitors were able to further strengthen their competitive position by expanding their product offerings and combining their financial resources. We expect this consolidation trend to continue in 2017.continue.

Overview of Semiconductor Manufacturing Process

The manufacturing of semiconductors is a complex process that requires increasingly sophisticated engineering and manufacturing expertise. The manufacturing process can be generally divided into the following stages:

We are involved in all stages of the semiconductor manufacturing process except circuit design and wafer fabrication.

Strategy

Our objective is to provide integrated solutions that set industry standards, including packaging, testing services, interconnect materials design and production capabilities, and to lead and facilitate the industry trend toward outsourcing semiconductor manufacturing requirements. The principal elements of our strategy are to:

Grow Our Packaging Services and Expand Our Range of Offerings

We believe that an important factor to attract leading semiconductor companies as our customers has been our ability to fulfill demand for a broad range of packaging solutions on a large scale. We intend to continue to develop process and product technologies to meet the packaging requirements of clients. Our expertise in packaging technology has enabled us to develop sophisticated solutions such as flip-chip packaging, bump chip carrier packaging, stacked die packaging and fine-pitch wire bonding. We are continuously investing in research and development in response to and in anticipation of migrations in technology and intend to continue to acquire access to new technologies through strategic alliances and licensing arrangements.

The increasing miniaturization of semiconductors and the growing complexity of interconnect technology have also resulted in the convergence of assembly processes at different levels of integration: chip, module, board and system. In response to this miniaturization and growing complexity, we have focused on providing module assembly services and, in addition, our subsidiary Universal Scientific Industrial has provided us with access to process and product technologies at the levels of module, board and system assembly and testing, which helps us to better anticipate industry trends and take advantage of potential growth opportunities. We expect to continue to combine our packaging, testing and materials technologies with the expertise of Universal Scientific Industrial at the systems level to develop our SiP business.

Strategically Expand and Streamline Production Capacity

To capitalize on the growing demand for packaging and testing services, we intend to strategically expand our production capacity, both through internal growth and selective acquisitions and joint ventures, with a focus on providing cost competitive and innovative packaging and testing services.

We intend to invest in trends that are essential to the development of the industry. We plan to expand our capacity with respect to, but not limited to, 12-inch wafer process, bumping, FC-CSP and SiP products to meet demand for smaller form factors, higher performance and higher packaging density.

In addition, we intend to promote our copper wire solutions to our customers in addition to gold wire. Gold wire is a significant raw material for us. Gold prices, however, are subject to intense fluctuations and have in the past impacted our profitability. We believe that replacing gold wire in some of our packages with copper wire technology will not only improve our profitability but will also enable us to provide more value to our customers by providing lower cost solutions, which could enhance our competitiveness and market share. We are currently the industry leader in terms of copper wire capacity. We thus plan to capitalize on the overall industry trend of copper conversion by maintaining our leadership and focusing on integrating copper wire into a wider range of traditional leadframe-based packages and higher end substrate-based packages.

We expect to focus our packaging and testing on providing cost competitive services through better management of capacity utilization and efficiency improvements and offer our services on a large scale with the intention of driving more integrated device manufacturer outsourcing in the long-run. Before the consummation of the Share Exchange, SPIL entered into an agreement to sell 30.0% of its equity interest in Siliconware Technology (Suzhou) Limited to Tsinghua Unigroup Ltd. In August 2018, we also resolved to sell 30.0% of our equity interest in ASEN to Tsinghau Unigroup Ltd.. We believe our strategic relationships with Tsinghua Unigroup Ltd. will enable us to expand our commercial reach in the P.R.C.’s fast-growing semiconductor market.

We evaluate acquisition and joint venture opportunities on the basis of access to new markets and technology, the enhancement of our production capacity, improvement of research and development capabilities, economies of scale and management resources, and closer proximity to existing and potential customers. For example,In 2010, we acquired controlling interests in Universal Scientific in 2010Industrial to broaden our offerings to include integrated solutions for electronic manufacturing services in relation to computers and storage, peripherals, communications, industrial, automotive, and storage and server applications. In addition, in May 2015, we entered into a joint venture agreement with TDK Corporation to invest in ASEEE to further expand our business in embedded substrates. WeIn February 2019, ASE’s board of directors resolved to purchase ordinary shares newly issued by ASEEE at par value through its capital increase by cash. In September 2015, we acquired 779,000,000 common shares (including common shares represented by American depositary shares) of SPIL through the Initial SPIL Tender Offer in September 2015Offer.In March and April 2016, we acquired an additional 258,300,000 common shares of SPIL (including those represented by American depositary shares) in March and April 2016 through open market purchases. WeIn June 2016, we entered into the Joint Share Exchange Agreement with SPIL, and in June 2016, and uponApril 2018, after the consummation of the Share Exchange, which is subject to shareholders’ approval of both companies and the satisfaction of other conditions, ASE and SPIL will becomebecame wholly owned subsidiaries of ASE HoldingASEH concurrently.

Continue to Leverage Our Presence in Key Centers of Semiconductor and Electronics Manufacturing

We intend to continue leveraging our presence in key centers of semiconductor and electronics manufacturing to further grow our business. We have significant packaging, testing and electronic manufacturing services operations in Taiwan, currently one of the leading centers for outsourced semiconductor and electronics manufacturing in the world. This presence enables our engineers to work closely with our customers as well as wafer foundries and other providers of complementary semiconductor and electronic manufacturing services early in the design process, enhances our responsiveness to the requirements of our customers and shortens production cycles. In addition, as a turnkey service provider, we are able to offer our products to our customers and complementary service providers within relatively close geographic proximity. Besides our current operations in Taiwan, we intend to expand our operations in our other subsidiaries.

We have primary operations in the following locations besides our locations in Taiwan:

Strengthen and Develop Strategic Relationships with Our Customers and Providers of Complementary Semiconductor Manufacturing Services

We intend to strengthen existing and develop new strategic relationships with our customers and providers of other complementary semiconductor manufacturing services, such as wafer foundries, as well as equipment vendors, raw material suppliers and technology research institutes, in order to offer our customers total semiconductor manufacturing solutions covering all stages of the manufacturing of their products from design to shipment. In addition, we are working with our customers to co-develop new packaging technologies and designs.

Since 1997, we have maintained a strategic alliance with TSMC, currently one of the world’s largest dedicated semiconductor foundries, which designates us as their non-exclusive preferred provider of packaging and testing services for semiconductors manufactured by TSMC. Through our strategic alliance with and close geographic proximity to TSMC, we are able to offer our customers a total semiconductor manufacturing solution that includes access to foundry services in addition to our packaging, testing and direct shipment services.

Principal Products and Services

We offer a broad range of semiconductor packaging and testing services. In addition, we have provided electronic manufacturing services since our acquisition of a controlling interest in Universal Scientific Industrial in February 2010.2010 and acquisition of all the shares of USI Inc. in September 2018. Our package types generally employ either leadframes or substrates as interconnect materials. The semiconductors we package are used in a wide range of end-use applications, including communications, computing, consumer electronics, industrial, automotive and other applications. Our testing services include front-end engineering testing, which is performed during and following the initial circuit design stage of the semiconductor manufacturing process, wafer probe, final testing and other related semiconductor testing services. We focus on packaging and testing semiconductors. We offer our customers turnkey services, which consist of packaging, testing and direct shipment of semiconductors to end users designated by our customers. Our electronic manufacturing services are used in a wide range of end-use applications, including, but not limited to, computers and storage, peripherals, communications, industrial applications, automotive electronics, and storage and server applications. In 2016,2018, our revenues generated from packaging, testing and electronic manufacturing services accounted for 45.6%,9.8%48.1%, 9.7% and 42.0%40.9% of our operating revenues, respectively.

Packaging Services

We offer a broad range of package types to meet the requirements of our customers, including flip-chip BGA, flip-chip CSP, aCSP (advanced chip scale packages), quad flat packages (QFP), thin quad flat packages (TQFP), bump chip carrier (BCC), quad flat no-lead (QFN) packages, aQFN (advanced QFN) and Plastic BGA. In addition, we provide 3D chip packages, such as MAP POP (package on package) and, aMAP POP (advanced, laser ablation type), which enable our customers to mount packages more easily.easily, and HB PoP (High-Band package on Package) for higher performance orientation and marketing requirement. We also offer other forms of stacked die solutions in different package types, e.g., stacked die QFN, hybrid BGAs containing stacked wire bond and FC die. Meanwhile, we are developing the cost-effective solutions to 3D packages, such 2.1D (substrate layer modification) and 2.5D (substrate interposer) to fulfill current low cost and high performance requirement in parallel with 3D packages with TSV (Through Silicon Via) technology. Our first product has been a CMOS image sensor with TSV to minimize the form factor. In addition, to meet current trends toward low cost solutions, we provide copper wire bonding solutions which can be applied to current gold wire products. Furthermore, weWe also provide high volume manufacturing experience with silver wire bonding for FCCSP Hybrid packages. Furthermore, we are one of the key providers of IoT (Internet of Things), server and automotive services. We believe we are among the leaders in such packaging processes and technologies and are well positioned to lead the technology migration in the semiconductor packaging industry.

We have also been engaging in the production of module-based solutions, including Wi-Fi modules and RF modules, for a number of years. We provide customized module services with SiP solutions to meet customer needs and complex marketing requirements.

Advanced Packages.The semiconductor packaging industry has evolved to meet the requirements of high-performance electronics products. We believe that there will continue to be growing demand for packaging solutions with increased input/output density, smaller size and better heat dissipation characteristic.

We have focused on developing our capabilities in certain packaging solutions, such as aCSP (wafer-level chip scale package), flip-chip BGA, Heat-Spreader FCBGA, flip-chip CSP, Hybrid FCCSP (Flip-Chip + W/B), Flip-Chip PiP (Package in Package), Flip-Chip PoP (Package on Package), aS 3™ (Advanced Single Sided Substrate), HB POP (High-Bandwidth POP), Fan-Out Wafer Level Packaging, SESUB and 2.5D. Flip-chip BGA technology replaces wire bonding with wafer bumping for interconnections within the package. Wafer bumping involves the placing of tiny solder balls, instead of wires, on top of dies for connection to substrates. As compared with more traditional packages, which allow input/output connection only on the boundaries of the dies, flip-chip or wafer-level package solutions significantly enhance the input/output flow by allowing input/output connections over the entire surface of the dies.

Chip scale packages typically have an area no greater than 120% of the silicon die. For wafer level package, the electrical connections are plated or printed directly onto the wafer itself, resulting in a package very close to the size of the silicon die. Wafer-level packages do not include an interposer so they are unlike substrate-based packages, where the die is usually mounted on an interposer which contains electrical connections in the form of small bumps or balls.

aEASI (Advance Embedded Assembly Substrate Integration) is a technology which allows the embedding thin chips into substrate build-up layers. aEASI can be used in various technologies tailored to clients’ demand, such as package solution of miniaturization, and has also been proven to have better electrical/thermal performance. It also provides flexibility in design (such as for MicroSiP) and the electrical contacts to the chips are realized by laser-drilled and metallized micro-vias to replace traditional wire bonding process. aEASI are mainly used in power management applications.

WL MEMs (Wafer-Level MEMs) is advanced assembly for MEMs in wafer-level type instead of current LGA or leadframe types and to use TSV or chip to wafer technology. WL MEMs are mainly used in applications such as pressure, temperature, humidity and gyroscope sensors, among others.

FOWLP (Fan-Out Wafer-Level Packages) provides an extended solution and package type to integrate different functional chips or packages and to have good reduction in resistance and inductance over FCCSP, better thermal performance and smaller form factors of packages. FOWLP can be applied for different stack and SiP solutions.

We provide numerous technologies to meet various customer demands. The following table sets forth our principal advanced packages.