UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington D.C. 20549
FORM 20-F
☐REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) |
OR
(g) OF THE SECURITIES EXCHANGE ACT OF 1934
OR
☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2014
2021
OR
☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from ______________________ to _____________
________
☐SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Date of event requiring this shell company report ………………
Commission file number: 0-16050
TAT TECHNOLOGIES LTD.
(Exact name of Registrant as specified in its charter
and translation of Registrant’s name into English)
Israel
(Jurisdiction of incorporation or organization)
Giborei Israel
7, Netanya 4250407, Israel
(Address of principal executive offices)
Ehud Ben-Yair
Chief Executive Officer
Telephone: +972-54-4522565
Email: ehudb@tat-technologies.com
7 Giborei Israel St,
Natanya4250407, Israel
(Name, Telephone, E-mail and/or Facsimile number and Address of Company Contact Person)
Securities registered or to be registered pursuant to Section 12(b) of the Act:
Title of each class | Trading Symbol | Name of each exchange on which registered |
Ordinary Shares, NIS 0.90 Par Value | TATT | NASDAQ Global Market |
Securities registered or to be registered pursuant to Section 12(g) of the Act: None
Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act:None
Indicate the number of outstanding shares of each of the issuer’s classes of capital or Common stock as of the close of the period covered by the annual report:
Ordinary Shares, par value NIS 0.90 per share…………… 8,808,344
8,874,696
(as of December 31, 2015)
2021)
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes o☐ No x
☒
If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.
Yes o☐ No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes x☒ No o
☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).
Yes ☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer | Accelerated filer | Non-accelerated filer | Emerging growth company ☐ |
If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report ☐
Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:
U.S. GAAP | International Financial Reporting Standards as issued by the International Accounting Standards Board ☐ | Other |
If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow:
Item 17 o☐ Item 18 o
☐
If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes ☐ No ☒
TABLE OF CONTENTS
| Page | ||||
| 1 | ||||
| 4 | ||||
| 4 | ||||
| 4 | ||||
| 4 | ||||
A. | Selected Financial Data | 4 | ||
B. | Capitalization and Indebtedness | 6 | ||
C. | Reasons for the Offer and Use of Proceeds | 6 | ||
D. | Risk Factors | |||
A. | Business Overview | |||
B. | Government Regulations | |||
C. | ||||
A. | Research and Development, Patents and Licenses | |||
B. | Trend Information | |||
C. | Off-Balance Sheet Arrangements | |||
D. | Tabular Disclosure of Contractual Obligations | |||
A. | Directors and Senior Management | |||
B. | Board Practices | |||
C. | 106 | |||
D. | Share Ownership | |||
A. | Major Shareholders | |||
B. | Related Party Transactions | 111 | ||
| C. | Interests of Experts and Counsel | 112 | ||
| 112 | ||||
| 112 | ||||
B. | Significant Changes | |||
| 113 | ||||
| A. | Offer and Listing Details | 113 | ||
| B. | Plan of Distribution | 113 | ||
| C. | Markets | 113 | ||
| D. | Selling Shareholders | 113 | ||
| E. | Dilution | 113 | ||
| F. | Expense of the Issue | 113 | ||
| 113 | ||||
| A. | Share Capital | 113 | ||
| B. | Memorandum and Articles of Association | 114 | ||
| C. | 115 | |||
| D. | ||||
| E. | ||||
| F. | ||||
| G. | ||||
| H. | ||||
ii
iii
INTRODUCTION
TAT Technologies Ltd. providesis a rangeleading provider of servicessolutions and productsservices to the commercial and military aerospace and ground defense sectors through our Gedera facility in Israel, or Gedera,industries, focused mainly on two product areas and through our subsidiary in the U.S., Limco-Piedmont Inc., or Limco-Piedmont. Limco-Piedmontservices: Thermal Management and Power and Actuation. The Company operates through Limco Airepair Inc., or Limco, and through Piedmont Aviation Component Services LLC, or Piedmont. We also operate in Israel through our wholly-owned subsidiary, Turbochrome Ltd., or Turbochrome.
TAT targets the commercial aerospace (serving a wide range of types and sizes of commercial and business jets), military aerospace and ground defense sectors. TAT has a global presence with over 500 customers worldwide, including tier one players in their respective markets such as Boeing, Embraer, Lockheed Martin, Collins, Liebherr, Pratt & Whitney (a division of Collins), the U.S. Armed Forces, and service centers of airlines such as KLM, Lufthansa and others. TAT enjoys a strong reputation among its customers for quality and service-oriented approach.
As a leading provider in its market, TAT’s business is supported by an extensive number of certifications, including from the American, European, British and Chinese civil aviation authorities, as well as leading manufactures such as Boeing and Honeywell International.
TAT employed as of December 31, 2021 413 employees and operates in four locations: its facility in Gedera, Israel (“Gedera”); Limco Airepair Inc. (“Limco”) in Tulsa, Oklahoma; Piedmont Aviation Component Services LLC (“Piedmont”) in Greensboro, North Carolina; Turbochrome Ltd. (“Turbochrome”) in Kiryat Gat, Israel; Headquarter in Netanya Israel and strategic sales office in Mooresville North Carolina.
Through ourits Gedera facility, we areTAT is an OEM of a broad range of heat transfer components,solutions, air conditioning systems and other cooling systems used in mechanical and electronic systems on board military and commercial aircraft as well as onin ground systems. The Gedera facility is also an OEM for a wide range of aviation accessories and provides limited MRO services for military and commercial customers, mainly for aviation accessories as well as for certain heat transfer components.accessories. Gedera is a repair station certified by the Federal Aviation Administration (“FAA”).
1
Through ourits Limco subsidiary, we provide heat transfer services and products to the aerospace industry. Limco is an FAA (Federal Aviation Administration) certified repair station andTAT provides aircraft MRO services and products for airlines, air cargo carriers, maintenance service centers and the military, primarily for heat transfer products.components. Limco is a repair station certified by the Federal Aviation Administration (“FAA”) and European Aviation Safety Agency ("EASA"). Limco is also an OEM of heat transfer solutions.
Through ourits Piedmont subsidiary, we provideTAT provides MRO services for aviation components in the area of landing geargears, APUs and auxiliary power units (APU)Machining and Plating services (MPG). During 2021 Piedmont has engaged in leasing of APUs mainly for the B777 aircraft. Piedmont is an FAA certifiedFAA-certified repair station and provides its services to airlines, air cargo carriers, maintenance service centers and, to a lesser extent, to the military.
Through ourits Turbochrome subsidiary, we provideTAT provides MRO services in the area of jet engine overhaul, which includes the overhaul and coating of jet engine components such as turbine vanes and blades, fan blades, variable inlet guide vanes and afterburner flaps. Turbochrome is certified by the FAA and EASA (European Aviation Safety Agency).EASA.
In addition, TAT, through its Piedmont subsidiary, holds approximately 4.9%5% of the equity securities of First Aviation Services Inc., or FAvS.(“FAvS”).
2
Further to the actions taken by TAT’s management in 2020 due to the effect of COVID-19 on the TAT's industry, TAT announced a restructuring plan in March 2021, which included the transfer of the Company's activity from our leased facility in Gedera to a facility in Kiryat Gat, Israel which is leased by our wholly-owned subsidiary Turbochrome from the Israel Land Authority (“ILA”) pursuant to a long-term lease agreement expiring in 2045 (with no rental payments due to the ILA in respect of such lease) and to our partially owned facility in Tulsa, Oklahoma. These actions will enable TAT to concentrate in heat exchanges cores activity in the United States allowing for better operational flow, getting closer to our customer base, and cutting fixed costs. For more information about the company's restructuring plan please see note 9 to the company signed an agreement with Engineering Holding of Moscow, Russia, or Engineering, to establish a new facility for the provision of services with respect to heat transfer products. The new company, TAT-Engineering LLC, will be based in Novosibirsk’s Tolmachevo airport. TAT - Engineering, LLC shall provide services for heat transfer products. According to the agreement, 51% of the shares are held by TAT and the remaining 49% are held by Engineering. The accounting treatment of the joint venture is based on the equity method due to variable participant rights granted to Engineering. The new entity was established on January 2016, therefore there is no activity related to TAT-Engineering LLC in 2015.financial statements.
Statements made in this annual report concerning the contents of any contract, agreement or other document are summaries of such contracts, agreements or documents and are not complete descriptions of all of their terms. If we filed any of these documents as an exhibit to this annual report or to any previous filing with the Securities and Exchange Commission (“SEC”), you may read the document itself for a complete recitation of its terms.
Except for the historical information contained in this annual report, the statements contained in this annual report are “forward looking“forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and the Private Securities Litigation Reform Act of 1995, as amended, with respect to our business, financial condition and results of operations. Such forward-looking statements reflect our current view with respect to future events and financial results. Statements which use the terms “believe”, “expect”, “plan”, “intend”, “estimate”,“believe,” “expect,” “plan,” “intend,” “estimate,” and similar expressions are intended to identify forward-looking statements. We remind readers that forward-looking statements are merely predictions and therefore inherently subject to uncertainties and other factors and involve known and unknown risks that could cause the actual results, performance, levels of activity, or our achievements, or industry results, to be materially different from any future results, performance, levels of activity, or our achievements expressed or implied by such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. Except as required by applicable law, including the securities laws of the United States, we undertake no obligation to publicly release any update or revision to any forward lookingforward-looking statements to reflect new information, future events or circumstances, or otherwise after the date hereof. We have attempted to identify significant uncertainties and other factors affecting forward-looking statements in the Risk Factors section that appears in Item 3D. “Key Information - Risk Factors”.Factors.”
3
Item 1.Identity of Directors, Senior Management and Advisers
Not applicable.
Not applicable.
A. Reserved
TAT’s selected historical information is derived from the audited consolidated financial statements of TAT as of December 31, 20152021 and 20142020 and for each of its fiscal years ended December 31, 2015, 20142021, 2020 and 2013,2019, which are included elsewhere in this annual report, and have been prepared in accordance with U.S. GAAP. The selected financial data as of December 31, 2013, 20122019, 2018 and 20112017 and for the years ended December 31, 20122018 and December 31, 20112017 is derived from audited consolidated financial statements of TAT not included in this annual report, which have been prepared in accordance with U.S. GAAP.
The selected consolidated financial data set forth below should be read in conjunction with and are qualified by reference to Item 5, “Operating and Financial Review and Prospects”,Prospects,” and our consolidated financial statements and notes thereto included elsewhere in this annual report.
4
Income Statement Data:
| Year Ended December 31, | ||||||||||||||||||||
| 2021 | 2020 | 2019 | 2018 | 2017 | ||||||||||||||||
| (in thousands, except share and per share data) | ||||||||||||||||||||
| Revenues: | ||||||||||||||||||||
| Products | $ | 25,870 | $ | 22,739 | $ | 25,019 | $ | 23,151 | $ | 36,053 | ||||||||||
| Services | 52,103 | 52,620 | 72,460 | 64,570 | 63,106 | |||||||||||||||
| Total revenues | 77,973 | 75,359 | 97,479 | 87,721 | 99,159 | |||||||||||||||
| Cost of revenues: | ||||||||||||||||||||
| Products | 23,761 | 20,751 | 21,557 | 23,807 | 28,096 | |||||||||||||||
| Services | 42,942 | 46,173 | 60,622 | 55,969 | 51,313 | |||||||||||||||
| Total cost of revenues | 66,703 | 66,924 | 82,179 | 79,776 | 79,409 | |||||||||||||||
| Gross profit | 11,270 | 8,435 | 15,300 | 7,945 | 19,750 | |||||||||||||||
| Operating expenses: | ||||||||||||||||||||
| Research and development, net | 517 | 185 | 113 | 458 | 621 | |||||||||||||||
| Selling and marketing | 5,147 | 4,369 | 4,929 | 4,754 | 4,772 | |||||||||||||||
| General and administrative | 8,354 | 7,612 | 7,654 | 7,901 | 8,668 | |||||||||||||||
| Other expenses (income) | (468 | ) | 315 | - | (4 | ) | 53 | |||||||||||||
| Restructuring expenses, net | 1,755 | - | - | - | - | |||||||||||||||
| 15,305 | 12,481 | 12,696 | 13,109 | 14,114 | ||||||||||||||||
| Operating income (loss) from continuing operations | (4,035 | ) | (4,046 | ) | 2,604 | (5,164 | ) | 5,636 | ||||||||||||
| Financial expenses, net | (540 | ) | (770 | ) | (422 | ) | (88 | ) | (286 | ) | ||||||||||
| Income (loss) from continuing operations before taxes on income | (4,575 | ) | (4,816 | ) | 2,182 | (5,252 | ) | 5,350 | ||||||||||||
| Taxes on income (tax benefit) | (662 | ) | (1,517 | ) | 589 | (1,464 | ) | 2,333 | ||||||||||||
| Income (loss) from continuing operations after taxes on income (tax benefit) | (3,913 | ) | (3,299 | ) | 1,593 | (3,788 | ) | 3,017 | ||||||||||||
| Share in results of equity investment of affiliated companies | (76 | ) | (185 | ) | (132 | ) | (140 | ) | (210 | ) | ||||||||||
| Net income (loss) from continuing operations | (3,989 | ) | (3,484 | ) | 1,461 | (3,928 | ) | 2,807 | ||||||||||||
| Net income(loss) from discontinued operation | $ | 427 | $ | (1,845 | ) | $ | (655 | ) | $ | (480 | ) | $ | (411 | ) | ||||||
| Net income (loss) attributable to TAT Technologies’ shareholders | $ | (3,562 | ) | $ | (5,329 | ) | $ | 806 | $ | (4,408 | ) | $ | 2,396 | |||||||
| Basic and diluted net income (loss) per share: | ||||||||||||||||||||
| Net income (loss) per share attributable to controlling interest | (0.4 | ) | (0.6 | ) | 0.1 | (0.5 | ) | 0.27 | ||||||||||||
| $ | (0.4 | ) | $ | (0.6 | ) | $ | 0.1 | $ | (0.5 | ) | $ | 0.27 | ||||||||
| Weighted average number of shares used in computing: | ||||||||||||||||||||
| Basic net income (loss) per share | 8,874,696 | 8,874,696 | 8,874,696 | 8,864,885 | 8,848,028 | |||||||||||||||
| Diluted net income (loss) per share | 8,874,696 | 8,874,696 | 8,874,696 | 8,864,885 | 8,909,072 | |||||||||||||||
| Cash dividend per share | $ | - | $ | - | $ | - | $ | - | $ | 0.34 | ||||||||||
5
| Year Ended December 31, | ||||||||||||||||||||
| 2015 | 2014 | 2013 | 2012 | 2011 | ||||||||||||||||
| (in thousands, except share and per share data) | ||||||||||||||||||||
| Revenues: | ||||||||||||||||||||
| Products | $ | 31,339 | $ | 31,363 | $ | 34,364 | $ | 36,263 | $ | 36,837 | ||||||||||
| Services | 54,268 | 49,363 | 45,187 | 41,652 | 36,902 | |||||||||||||||
| Total revenues | 85,607 | 80,726 | 79,551 | 77,915 | 73,739 | |||||||||||||||
| Cost of revenues: | ||||||||||||||||||||
| Products | 24,466 | 23,616 | 25,143 | 25,494 | 25,185 | |||||||||||||||
| Services | 47,476 | 40,906 | 36,600 | 33,977 | 32,375 | |||||||||||||||
| Write down of inventory and impairment charges of long lived assets | - | - | - | - | 5,465 | |||||||||||||||
| Total cost of revenues | 71,942 | 64,522 | 61,743 | 59,471 | 63,025 | |||||||||||||||
| Gross profit | 13,665 | 16,204 | 17,808 | 18,444 | 10,714 | |||||||||||||||
| Operating expenses: | ||||||||||||||||||||
| Research and development, net | 890 | 1,070 | 713 | 995 | 455 | |||||||||||||||
| Selling and marketing | 2,903 | 3,203 | 3,150 | 2,899 | 2,819 | |||||||||||||||
| General and administrative | 8,469 | 8,123 | 8,668 | 9,178 | 8,598 | |||||||||||||||
| Other expenses (income) | 631 | (11 | ) | (20 | ) | (13 | ) | (190 | ) | |||||||||||
| Gain on bargain purchase | (4,833 | ) | - | - | - | - | ||||||||||||||
| 8,060 | 12,385 | 12,511 | 13,059 | 11,682 | ||||||||||||||||
| Operating income (loss) from continuing operations | 5,605 | 3,819 | 5,297 | 5,385 | (968 | ) | ||||||||||||||
| Financial expenses, net | (349 | ) | (1,294 | ) | (50 | ) | (106 | ) | (420 | ) | ||||||||||
| Gain from dilution of interests in affiliated company | - | - | - | - | 240 | |||||||||||||||
| Income (loss) from continuing operations before taxes on income | 5,256 | 2,525 | 5,247 | 5,279 | (1,148 | ) | ||||||||||||||
| Taxes on income (tax benefit) | 644 | 1,360 | 1,041 | 2,090 | (335 | ) | ||||||||||||||
| Income (loss) from continuing operations after taxes on income | 4,612 | 1,165 | 4,206 | 3,189 | (813 | ) | ||||||||||||||
| Share in results of affiliated company | 1,237 | 267 | 1,025 | (3,756 | ) | 331 | ||||||||||||||
| Net income (loss) from continuing operations | 5,849 | 1,432 | 5,231 | (567 | ) | (482 | ) | |||||||||||||
| Net income (loss) from discontinued operations, net of tax | - | - | (2,429 | ) | (1,147 | ) | (548 | ) | ||||||||||||
| Net income (loss) attributable to TAT Technologies’ shareholders | $ | 5,849 | $ | 1,432 | $ | 2,802 | $ | (1,714 | ) | $ | (1,030 | ) | ||||||||
| Basic and diluted net income (loss) per share | ||||||||||||||||||||
| Net income (loss) from continuing operations per share attributable to controlling interest | 0.66 | 0.16 | 0.60 | (0.06 | ) | (0.05 | ) | |||||||||||||
| Discontinued operations attributable to controlling interest | - | - | (0.28 | ) | (0.13 | ) | (0.07 | ) | ||||||||||||
| $ | 0.66 | $ | 0.16 | $ | 0.32 | $ | (0.19 | ) | $ | (0.12 | ) | |||||||||
| Weighted average number of shares used in computing | ||||||||||||||||||||
| Basic net income (loss) per share | 8,808,344 | 8,805,495 | 8,799,237 | 8,808,075 | 8,815,003 | |||||||||||||||
| Diluted net income (loss) per share | 8,810,689 | 8,826,542 | 8,808,920 | 8,808,075 | 8,815,003 | |||||||||||||||
| Cash dividend per share | $ | - | $ | 0.23 | $ | - | $ | 0.28 | $ | - | ||||||||||
Balance Sheet Data:
| As of December 31, | ||||||||||||||||||||
| 2021 | 2020 | 2019 | 2018 | 2017 | ||||||||||||||||
| (in thousands) | ||||||||||||||||||||
| Working capital | $ | 47,404 | $ | 54,260 | $ | 62,934 | $ | 62,778 | $ | 67,042 | ||||||||||
| Total assets | 110,833 | 116,121 | 114,675 | 103,287 | 111,977 | |||||||||||||||
| Long-term liabilities, excluding current maturities | 9,472 | 10,657 | 8,601 | 4,312 | 5,083 | |||||||||||||||
| Shareholders’ equity | $ | 76,784 | $ | 80,281 | $ | 85,370 | $ | 84,294 | $ | 88,574 | ||||||||||
| As of December 31, | |||||||||||||||||||||
| 2015 | 2014 | 2013 | 2012 | 2011 | |||||||||||||||||
| (in thousands) | |||||||||||||||||||||
| Working capital | $ | 70,813 | $ | 70,775 | $ | 73,905 | $ | 71,521 | $ | 70,756 | |||||||||||
| Total assets | 109,583 | 99,176 | 108,951 | 109,033 | 115,409 | ||||||||||||||||
| Long-term liabilities, excluding current maturities | 3,322 | 2,689 | 4,256 | 6,421 | 9,333 | ||||||||||||||||
| Shareholders’ equity | $ | 91,424 | $ | 85,541 | $ | 85,640 | $ | 82,324 | $ | 86,461 | |||||||||||
B. Capitalization and Indebtedness
Not applicable.
C. Reasons for the Offer and Use of Proceeds
Not applicable.
6
D. Risk Factors
Investing in our ordinary shares involves certain risks and uncertainties. You should carefully consider the risks and uncertainties described below before investing in our ordinary shares. Our business, prospects, financial condition and results of operations could be adversely affected due to any of the following risks. In that case, the value of our ordinary shares could decline, and you could lose all or part of your investment.
Risks Related to Our Business and Our Industry
The aerospace industry is subject to significant government regulation and oversight, and TAT and its subsidiaries may incur significant additionalfines, penalties and costs toif TAT and its subsidiaries do not comply with these regulations.
The aerospace industry is highly regulated in the United States and elsewhere. To manufacture, sell and service parts used in other countries.aircrafts, TAT and its subsidiaries must be certified or accepted by the FAA, EASA, the United States Department of Defense the European Aviation Safety Agency, or EASA, and similarcomparable agencies in foreignother countries and by individualleading original equipment manufacturers or OEMs, in order to manufacture, sell and service parts used in aircrafts.(“OEMs”). If any of theour material certifications, authorizations or approvals of TAT or its subsidiaries are revoked or suspended, then the operations of TAT or its subsidiaries, as the case may be, will be significantly curtailed and TAT and its subsidiaries could be subjected to significant fines and penalties. In the future, new and more demanding government regulations may be adopted or industry oversight may be increased. TAT and its subsidiaries may have to incur significant additional costs to achieve compliance with new regulations or to reacquire a revoked or suspended license or approval, which could materially reduce profitability.
TAT competes with a number of established companies in all aspects of TAT’s business, many of which have significantly greater resources or capabilities than TAT.
| (i) | Manufacturers based in the United States, such as the Hughes-Treitler division of Ametek Inc., Boyd Corporation, , Collins Aerospace, Honeywell International, and Triumph Thermal Systems; |
| (ii) | Manufacturers based in Europe such as HS Marston Aerospace Ltd., a subsidiary of Collins Aerospace, Secan and Liebherr-Aerospace Toulouse S.A.; and |
| (iii) | Manufacturers based in Asia such as Sumitomo Precision Products from Japan. |
7
Many of TAT’s competitors are far larger, have substantially greater resources than TAT, including technical, financial, research and development, marketing and distribution capabilities, than TAT, and enjoy greater market recognition. These competitors may be able to achieve greater economies of scale and may be less vulnerable to price competition than TAT. In addition, some of those companies are considered to be tier one suppliers offering customers a wider range of systems and products, in addition to heat transfer solutions, as a bundle. TAT may not be able to offer its products as part of integrated systems to the same extent as its competitors or successfully develop or introduce new products that are more cost effective or offer better performance than those of its competitors. Failure to do so could adversely affect TAT’s business, financial condition and results of operations.
TAT’s major competitors in the area of MRO services for aviation components, landing gears and APUs, are the service divisions of OEMs, the in-house maintenance services of a number of commercial airlines and other independent service providers, including Triumph Accessories (Triumph Corporation), LORI Heat Transfer Center of Honeywell (Tulsa, Oklahoma), SECAN (France),Drake Air – Ametek (Tulsa, Oklahoma), American Cooler Service, Hamilton Malaysia, Lufthansa Technik and Elite.
Competition in the MRO and services market is based on price, quality, engineeredengineering solutions, ability to provide a broad rangebreadth of services, and the ability to perform repairs and overhauls rapidly. A number of our competitors have inherent competitive advantages. For example, we compete with the service divisions of large OEMs which are able to derive significant brand recognition from their OEM manufacturing activities. We also compete with the in-house service divisions of large commercial airlines andwhere there is a strong incentive for an airline to fully-utilize the services of its maintenance employees and facilities.
Further, TAT’s competitors may have additional competitive advantages, such as:
The ability to adapt faster to changes in customer requirements and industry conditions or trends; |
Access to superior technology and greater marketing resources; |
The ability to offer complete systems in addition to components; and
The ability to bundle heat transfer components and solutions and other aircraft components.
If TAT is unable to overcome these competitive disadvantages, then TAT’s business, financial condition and results of operations would be adversely affected.
TAT derives a material partshare of its revenues from severalfew major customers. If TAT loses any of these customers or they reduce the amount of business they do with TAT, TAT’s revenues may be seriously affected.
Five customers accounted for approximately 20.11%27.8%, 18.6%24.6% and 22.2%23.7% of TAT’s revenues for the years ended December 31, 2015, 20142021, 2020 and 2013,2019, respectively. TAT’s major customers may not maintain the same volume of business with TAT in the future. If TAT loses any of these customers or they reduce the amount of business they do with TAT, TAT’s revenues may be seriously affected.
A part of the revenues of TAT and its subsidiaries are from contracts with the U.S. and Israeli governments and are subject to special risks. A loss of all, or a major portion, of thethese revenues of TAT or any of its subsidiaries from government contracts could have a material adverse effect on TAT’s operations.
A portion of the revenues of TAT and its subsidiaries are from contracts with the U.S. and Israeli governments. Sales to the U.S. and Israeli governments accounted for approximately 5.5%5.6%, 6.8%8.1% and 4.2%7.2% of TAT’s revenues on a consolidated basis for the years ended December 31, 2015, 20142021, 2020 and 2013,2019, respectively.
Business with the U.S. and Israeli governments, as well as with the governments of other countries, is subject to unique risks which aredo not as relevant inexist when doing business with other private parties. These risks include the ability of the governmental authorities to unilaterally:
| Suspend |
Terminate existing contracts, with or without cause, at any time;
Condition the contract. Termination for convenience provisions generally provide only forreceipt of new contracts on conditions which are beyond the recoverycontrol of TAT;
Reduce the value of existing contracts;
Audit the contract-related costs incurred or committed, settlement expenses and profit on the work completed byfees of TAT and its subsidiaries, prior to termination.including allocated indirect costs; and
Control or prohibit the export of products of TAT and its subsidiaries.
Also, military and defense budgetsbudget cuts may result in reduced demand for the products and manufacturing services of TAT and its subsidiaries. Any declineSmaller budgets could result in reduction in the business revenues of TAT and its subsidiaries and adversely affect their business, results of operations and financial condition.subsidiaries.
If TAT and its subsidiaries do not receive the governmental approvals necessary for the export of their products, TAT’s revenues may decrease. Similarly, if TAT’s suppliers and partners do not receive their government approvals necessary to export their products or designs to TAT, TAT’s revenues may decrease.
Under Israeli law, the export of certain of the products and know-how of TAT and its subsidiaries areis subject to approval by the Israeli Ministry of Defense. To initiatePrior to initiating sales proposals with regard to exportsfor the export of thethese products and know-how of TAT and its subsidiaries and to exportthe actual shipment of such products or know-how, TAT and its subsidiaries must obtain permits from the Ministry of Defense. TAT and its subsidiaries may not be able to receive in a timely manner, or at all, all the required permits for which itthey may apply in the future.
10
Similarly, under foreignmany countries have laws according to which the export of certain military products, technical designs and spare parts require the prior approval of, or export license from, such foreigntheir governments. In orderThis process also applies to maintain the third party production, certain co-development activitiesour partners and procurements required for the performance of certain contracts,suppliers. If TAT and its subsidiaries must receive detailed technical designs, products or product parts’ samples from its strategic partners or suppliers. TAT and its subsidiaries may not be ablesuppliers are unable to receive all the required permits and/or licenses in a timely manner, or at all, and consequently, TAT’s revenues may decrease.
TAT depends on a limited number of suppliers of components for certain of its products and if TAT or any of its subsidiaries isare unable to obtain these components when needed, they would experience delays in manufacturing their products and TAT’s financial results could be adversely affected.
TAT relies on a limited number of key suppliers for parts for certain of its OEM activities and MRO services. CertainSome of these suppliers are currently the sole source of one or more components upon which TAT is dependent. For example, Honeywell International Inc. is a key supplier to TAT of APU spare parts and of certain other components used by TAT and its subsidiaries in the production of productsfor OEM activities and in the provision of MRO services. TAT's subsidiary, Piedmont, is a Honeywell licensed Authorized Repair Center for APUs under two separate agreements, for military and commercial applications. In September 2020 Piedmont signed a 10 years agreement with Honeywell for the commercial application. Under this contract Piedmont is an authorized MRO station under Honeywell's license.
During June 2021 Piedmont has also signed a similar contract for the APU 331-500 serving the Boeing 777 aircraft.
In July 2021 piedmont signed another contract granting Piedmont a 10 years MRO license for MRO of APU131 serving the Boeing 737 platform and AirBus A319-320-321 platform.
Also, Piedmont is a provider of services for the Safran and Liebherr landing gear systems (used on ATRs and Ejet platforms), and to do so, Piedmont is dependent on these OEM’s to provide parts and engineering support.
Suppliers of some of these components require TAT to place orders with significant lead-timelead time to assure supply in accordance with TAT’s requirements. A delay in the supply of these components can significantly delay the delivery of our products and services. If TAT were to engage in a commercial dispute with or be unable to obtain adequate supplies of parts from these suppliers at commercially reasonable prices or required lead time, TAT’s operationsTAT could experience delays in manufacturing and its financial results could be interrupted.adversely affected. Increased costs associated with supplied materials or components could increase TAT’s costs and reduce TAT’s profitability if TAT is unable to pass these cost increases on to its customers.
In addition, the COVID-19 pandemic and continuing economic recovery continues to negatively impact the global supply chain and we have experienced negative impacts from supply chain pressures. The pandemic continues to cause product and labor shortages, delivery delays, and increased costs of raw materials, labor and supplier products and services around the world. We are working with our suppliers to mitigate delays in our receipt of necessary raw materials, components and other supplies and to reduce supply chain costs.
TAT may face increased costs and a reduced supply of raw materials. TAT may not be able to recoup future increases in the cost of raw materials costsrequired for its operations through price increases for its products.
In recent years, the cost of raw materials and components used by TAT has fluctuated significantly due to market and industry conditions. In addition, border closings, lockdowns and labor shortages resulting from COVID-19, as well as the continuing economic recovery, negatively impacted global supply and distribution capabilities. Decreases in the availability of supplies, increases in the cost of supplies, and delivery issues have caused shortages and delays, as well as increased costs for the procurement of raw materials, components and other supplies required for our performance. Given the current inflationary pressures both in the U.S. and in other countries in which we operate, we have and may continue to experience labor and material cost increases at a rate higher than what we have experienced in recent years. TAT may not be able to recoup future increases in the cost of raw materials and components costsor component cost through price increases for its products.products and services. Our operating profits and margins under our contracts could be adversely affected by these factors, particularly if the current inflationary pressures are prolonged. If TAT is unable to obtain the raw materials required for its operation, TAT could experience delays or disruptions in the provision of its services and its financial results could be adversely affected.
TAT’s future success depends on its ability to develop new offerings and technologies.
The markets we serve are characterized by rapid changes in technologies and evolving industry standards. In addition, some of our products are installed on, and some of our services are provided in connection with, platforms that may have a limited life or become obsolete. Unless we develop new offerings or enhance our existing offerings we may be susceptible to loss of market share resulting from the introduction of new or enhanced offerings by competitors. For example, during 2020 TAT Turbochrome decided to discontinue its JT8D repair activity, due to final shut down of fleets caused by the COVID19 effect on the aviation industry. If we do not develop MRO offerings for newer types of jet engines, it will have a material adverse impact on the business and results of operations of the overhaul and coating of jet engine components segment. In fiscal year 2021, the revenues of the overhaul and coating of jet engine components segment accounted for approximately 5.7% of TAT’s total revenues.
12
TAT may face significant risks in the management of its inventory, andwhile failure to effectively manage its inventory levels may result in supply imbalances that could harm its business
Our backlog includes purchase orders received from our customers for our products or services and our estimation of the maximalmaximum potential revenues that are expected to be derived from frame agreements with our customers. There is no legal obligation from the customer to purchase our products or services under those frame agreements. In addition, we use estimations to evaluate the potential revenue from these agreements. From time to time, for reasons beyond our control, projects are delayed, scaled back, stoppedsuspended or cancelled, or the customer delays making payments, which may adversely affect the revenue, profit and cash flow that we ultimately receive from contracts reflected in our backlog.
TAT faces special risks from international sales operations which may have a material adverse effect on TAT’s business, operating results and financial condition.
In the years ending December 31, 2015, 20142021, 2020 and 2013,2019, approximately 94%89%, 93%91% and 91.4%93% of TAT’s sales, respectively, resulted from TAT’s international operations (outout of Israel).Israel. This source of revenue concentration is subject to various risks, including:
Accordingly, TAT and its subsidiaries may encounter significant difficulties in connection with the sale of their products in international markets.
General business conditions are vulnerable to the effects of epidemics, such as the COVID-19 coronavirus, which could materially disrupt our business.
The ongoing COVID-19 pandemic adversely effected and continues to have an adverse effect on TAT’s industry and the markets in which TAT operates. The COVID-19 outbreak has significantly impacted the aviation market in which TAT’s customers operate and has resulted in a reduction of TAT’s business with some of these customers. In order to mitigate the impact of the decline in business as a result of the pandemic, TAT implemented measures to reduce its expenses, including the Company's restructuring plan announced in March 2021, reduction in its headcount as well as other cost savings measures. Please see note 9 to the company financial statements. The Company applied and received governmental assistance as part of the COVID-19 relief programs provided by the Israeli government and certain states in the United States in which the Company and its subsidiaries operate. Please see notes 10 and 11 to the company financial statements for long term loans, credit lines and grants received in connection with governmental assistance. Given the current macro-economic environment and the uncertainties regarding the potential impact of COVID-19 on TAT’s business, there can be no assurance that TAT’s estimates and assumptions used in the measurement of various assets and liabilities in the financial statements will prove to be accurate predictions of the future.
14
TAT may engage in future acquisitions that could dilute TAT’s shareholders’ equity and harm TAT’s business, results of operations and financial condition.
TAT has pursued, and will continue to pursue, growth opportunities through internal development andorganic growth as well as acquisition of complementary businesses, products and technologies. InFor example, in October 2015, TAT completed the acquisition of Turbochrome Ltd. for approximately $3.5 million. In addition, TAT may paymillion, and an additional earn-out capped at $2payment of $ 0.5 million in the event that Turbochrome meets certain annual revenue targets in 2015 andduring 2016.
TAT is unable to predict whether or when any prospective acquisition will be completed. TAT may not be able to successfully identify suitable acquisition candidates, complete acquisitions, integrate the acquired businesses into its operations, or expand into new markets. The process of integrating an acquired business may be prolonged due to unforeseen difficulties and may require a disproportionate amount of TAT’s resources, and management’sincluding management attention. TAT may not be able to successfully identify suitable acquisition candidates, complete acquisitions, integrate acquired businesses into its operations, or expand into new markets. Further,Furthermore, once integrated, acquisitions may not achieve comparable levels of revenues, profitability or productivity as TAT’s existing business or otherwise perform as expected. The occurrence of any of these events could harm TAT’s business, financial condition or results of operations. Future acquisitions may require substantial capital resources, which may require TAT to seek additional debt or equity financing.
Future acquisitions by TAT could result in the following, any of which could materially harm TAT’s results of operations or the price of TAT’s ordinary shares:
| Issuance of equity securities that would dilute TAT’s shareholders’ percentages of ownership; |
Large one-time write-offs;
The incurrence of debt and contingent liabilities;
Difficulties in the assimilation and integration of operations, personnel, technologies, products and information systems of the acquired companies;
15
Diversion of management’s attention from other business activities and concerns;
Contractual disputes;
Risks of entering geographic and business markets in which TAT has no or only limited prior experience; and
Potential loss of key employees of acquired organizations.
Our strategic partnerships and relationships carry inherent business risks.risks.
We may participate in strategic partnerships and joint ventures in a number of countries. For example, onin November 25, 2015, the companywe signed a joint venture agreement with Engineering Holding of Moscow, Russia, orRussian-based Engineering, to establish a new facility for the provision of MRO services with respect tofor heat transfer productscomponents in Russia and services.the Commonwealth of Independent States (“CIS”). The new company, TAT-Engineering LLC, will beis based in Novosibirsk’s Tolmachevo airport.
Our actions with respect to these affiliated companies may be restricted to some degree by shareholdersshareholder agreements entered into with our strategic partners. Our business, financial condition, results of operations and prospects may be materially harmed if disagreements develop with our partners. Our ability to withdraw funds and dividends from these entities may depend on the consent of partners. If one of our strategic partners becomes subject to investigation, sanctions or liability, TAT might be adversely affected. Furthermore, strategic partnerships in emerging markets are accompanied by risks inherent to those markets, such as an increased possibilityprobability of a partner defaulting on obligations or losing a partner with important insights in that region. Strategic partnerships in emerging markets are subject to greater risks than strategic partnerships in more developed markets, including significant political, legal and economic risks and risks related to fluctuations in currencies. TheFor example, the value of the Russian currency, for example, has declined significantly in response to political and economic issues since December 31, 2013, and may continue to decline. The significant depreciation of the Russian ruble against the U.S. dollar may negatively impact our results of operations related to theour joint venture in Russia.
16
Rapid technological changes may adversely affect the market acceptance of the products of TAT.TAT's products.
The aerospace and defense markets in which TAT competes are subject to technological changes, introduction of new products, changechanges in customer demands and evolving industry standards. For example, new materials, new structures and 3D printing – a technology based on the principle of joining thin layers of materials, in horizontal cross-section, to build up a real, three-dimensional object from a digital model – may enable the manufacturing of high-quality and new characterization heat exchangers in serial production with a better return of value. The future success of TAT will depend upon its ability to keep pace with technological developments and to timely address the increasingly sophisticated needs of its customers by supporting existing and new technologies and by developing and introducing enhancements to its current products and by introducing new products. TAT may not be able to successfully develop and market enhancements to its products that will respond to technological change, evolving industry standards or customer requirements. TAT may experience difficulties that could delay or prevent the successful development, introduction and sale of such enhancements; and such enhancements may not meet the requirements of the market or achieve any significant degrees of market acceptance. If release dates of any new products or enhancements of TAT are delayed, or if when released, they fail to achieve market acceptance, TAT’s business, operating results and financial condition would be materially adversely affected.ones.
TAT has fixed-price contracts with some of its customers and TAT bears the risk of costs in excess of its estimates. In addition, TAT may not be able to pass on increased costs to its customers.
TAT has entered into multi-year, fixed-price contracts with some of its MRO and OEM customers. Pursuant to these contracts, TAT realizes all the benefits or costs resulting from any increases or decreases in the cost of providing services and products to these customers. Several of TAT’s contracts do not permitallow TAT to recover for increases in raw material prices, taxes or labor costs, andwhile other contracts may permit, to a limited extent, periodic price adjustments. Any increase in these costs could increase the cost of operating theour business of TAT and reduce itsour profitability. Factors such as inaccurate pricing and increases in the cost of labor, materials or overhead may result in cost over-runs and losses on those agreements. TAT may not succeed in obtaining the agreement of a customer approval to re-price a particular product and may not be able to recoup previous losses resulting from incomplete or inaccurate engineering data. In addition, as costs increase, TAT may not be able to pass on such increased costs to its other customers. This could materially Impactimpact TAT’s profitability.
TAT depends on its key executives, andexecutives; it may not be able to hire and retain additional key employees or successfully integrate new members of its team andteam; the loss of key employees could have a material adverse effect on TAT’s business.
TAT’s success will depend largely on its continued reliancedepends to a large extent on the experience and expertise of its senior management. Any member of theTAT’s senior managers of TATmanagement may terminatechoose to end his or her employment with TAT and seek employment with others who may seek his or her expertise.for any reason. The loss of the expertise of TAT’s senior management of TAT through death, disability or termination ofan employee’s decision to end his or her employment wouldcould have a material and adverse effect on TAT’sour business, financial condition and results of operations. TAT is not the beneficiary of life or disability insurance covering any of the executives,its senior management, key employees or other personnel of TAT. At the end of April 2016 Itsik Maaravi will step down from his position as TAT's CEO and will be replaced by Igal Zamir.personnel.
17
TAT depends on its manufacturing and MRO facilities and any material damage to these facilities may adversely impact TAT’s operations.
TAT uses equipment that is not easily repaired or replaced, and therefore material equipment failures could cause TAT or its subsidiaries to be unable to meet quality or delivery expectations of its customers.
Many of theTAT’s service and manufacturing processes of TAT are dependent on equipment that is not easily repaired or replaced. As a result, unexpected equipment failures could result in production delays or the manufacture of defective products. TheTAT’s ability of TAT to meet theits customers’ expectations of its customers with respect to on-time delivery of repaired components or quality OEM products is critical. The failureFailure by TAT to meet the quality or delivery expectations of its customers could lead to the loss of one or more of its significant customers.
TAT may fail to maintain effective internal controls in accordance with Section 404 of the Sarbanes-Oxley Act of 2002.
The Sarbanes-Oxley Act of 2002 imposes certain duties on TAT and TAT’sits executives and directors. TAT’s efforts to comply with the requirements of Section 404 of the Sarbanes-Oxley Act of 2002 (“SOX”) governing internal controls and procedures for financial reporting have resulted in increased general and administrative expenseexpenses and a diversion of management time and attention, andattention. TAT expects these efforts to require the continued commitment of significant resources. TAT may identify material weaknesses or significant deficiencies in its assessments of its internal controlcontrols over financial reporting. Failure to maintain effective internal controlcontrols over financial reporting could result in investigation or sanctions by regulatory authorities and could have a material adverse effect on TAT’s operating results, investor confidence in TAT’s reported financial information and the market price of TAT’s ordinary shares. Our independent registered public accounting firm is not required to and has not performed an audit of our internal controlcontrols over financial reporting as of December 31, 2015.2021.
18
TAT has potential exposure to liabilities arising under environmental laws and regulations.
Under certain environmental laws, liability associated with an investigation or remediation of hazardous substances can arise atfrom a broad range of properties, including properties currently or formerly operated by TAT or any of its predecessors, as well as properties to which TAT sent hazardous substances or wastes for treatment, storage, or disposal. Costs and other obligations can arise from claims for toxic torts, natural resource and other damages, as well as the investigation and clean-up of contamination at such properties. Under certain environmental laws, such liability may be imposed jointly and severally, so TAT may be responsible for more than its proportionate share and may even be responsible for the entire liability at issue. The extent of any such liability can be difficult to predict.
19
TAT is exposed to potential liabilities arising from product liability and warranty claims.
If any of our products are defective, we could be required to redesign or recall those products or pay substantial damages or warranty claims. Such an event could result in significant expenses, disrupt sales and affectdamage our reputation and that of our products.products and services. There can be no assurance that TAT will not experience any material product liability losses in the future, that it will not incur significant costs to defend such claims, that, although TAT maintains a product liability insurance, policy, its insurance coverage will be adequate if claims were to arise or that it would be able to maintain insurance coverage in the future at an acceptable cost. A successful claim brought against TAT or its subsidiaries in excess of its available insurance coverage may have a material adverse effect on TAT’s business.
In addition, contractual disputes over warranties can arise in the ordinary course of business. TAT may be subject to requests from customers for cost sharing or pricing adjustments from its customers as a part of itstheir commercial relationships, with them, even though they havethe customers had previously agreed to bear these risks.
Our operations depend on the continued and secure functioning of our computer and communications systems and the protection of information stored in computer databases maintained by us, and in certain circumstances, by third parties. Such systems and databases are subject to breach, damage, disruption or failure from, among other things, cyber-attacks and other unauthorized intrusions. In particular, we may be targeted by experienced computer hackers who may attempt to penetrate our computer systems and misappropriate or compromise our confidential information or that of our customers. A significant invasion, interruption, destruction or breakdown of our information technology, or IT, systems and/or infrastructure by persons with authorized or unauthorized access could negatively impact our business and operations. We could also experience business interruption, information theft and/or reputational damage from cyber-attacks, which may compromise our systems and lead to data leakage either internally or at our third-party providers. Both data that has been inputted into our main IT platform, which covers records of transactions, financial data and other data reflected in our results of operations, as well as data related to our proprietary rights (such as research and development, and other intellectual property-related data), are subject to material cyber security risks. To date, we are not aware that we have experienced any loss of, or disruption to, material information as a result of any such malware or cyber-attack.
TAT’s activity in Israel of TAT may be adversely affected by a change in the exchange rate of the NIS against the dollar. Because exchange rates between the NIS and the dollar fluctuate continuously, exchange rate fluctuations, particularly larger periodic devaluations, may have an impact on TAT’s profitability and period to period comparisons of TAT’s results.
TAT’s financial statements are stated in dollars, while a portion of theTAT’s expenses in Israel, of TAT, primarily labor expenses, are incurred in NIS and a portion of TAT’sits revenues are quoted in NIS and in Euro. Additionally, certain assets, as well as a portion of TAT’s liabilities, are denominated byin NIS. Because exchange rates between the NIS and the dollar fluctuate continuously, exchange rate fluctuations, particularly larger periodic devaluations, may have an impact on TAT’s profitability and period to period comparisons of TAT’s results. TAT’s results may be adversely affected by the devaluation of the NIS in relation to the dollar (or if such devaluation is on a lagging basis), if TAT’s revenues in NIS are higher than TAT’s expenses in NIS and/or the amountvalue of TAT’s assets in NIS are higher than TAT’s liabilities in NIS. Alternatively, TAT’s results may be adversely affected by an appreciation of the NIS in relation to the dollar (or if such appreciation is on a lagging basis), if the amount of TAT’s expenses in NIS are higher than the amount of TAT’s revenues in NIS and/or the amount of TAT’s liabilities in NIS are higher than TAT’s assets in NIS. From time to time, we enter into hedging transactions to attempt to limit the impact of foreign currency fluctuations. However, the protection provided by such hedging transactions may be partial and leave certain exchange rate-related losses and risks uncovered. Therefore, our business and profitability may be harmed by such exchange rate fluctuations.
Risk Factors Related to Our Ordinary Shares
TAT’s share price has been volatile in the past and may decline in the future.
TAT’s ordinary shares have experienced significant market price and volume fluctuations in the past and may experience significant market price and volume fluctuations in the future, in response to factors such as the following, some of which are beyond TAT’s control:
| Quarterly variations in TAT’s operating results; |
Changes in expectations as to TAT’s future financial performance, including financial estimates by securities analysts and investors;
Announcements of technological innovations or new products by TAT or TAT’s competitors;
Announcements by TAT or TAT’s competitors of significant contracts, acquisitions, strategic partnerships, joint ventures or capital commitments;
Announcements by third parties of significant claims or proceedings against us;
Additions or departures of key personnel;
Future sales of TAT’s ordinary shares (by our controlling shareholders or others);
De-listing of TAT’s shares from NASDAQ and/or from the TASE;
Stock market price and volume fluctuation;
Legal proceedings against TAT’s controlling shareholders; and
Regulatory actions by securities authorities which impacts TAT’s interaction with securities analysts and institutional investors.
In the past, securities class action litigation has often been brought against companies following periods of volatility in the market price of itstheir securities. TAT may in the future be the target of similar litigation.litigation in the future. Securities litigation could result in substantial costs and divert management’s attention and resources both of which could have a material adverse effect on TAT’s business and results of operations.
Substantial future sales of TAT’s ordinary shares by TAT’s principal shareholders may depress TAT’s share price.
TAT’s principal shareholders, FIMI Israel Opportunity FIVE, Limited Partnership and FIMI Opportunity V, L.P., (“FIMI” or the FIMI Funds,“FIMI Funds”), beneficially own together 53.7%59.21% of TAT’s outstanding shares. If FIMI shall sellsells a substantial number of TAT’s ordinary shares or if the perception exists that TAT’s principal shareholdersFIMI may sell a substantial number of TAT’s ordinary shares, exists, the market price of TAT’s ordinary shares may fall. Any substantial sales of TAT’s shares in the public market may also might make it more difficult for TATimpede our ability to sell equity or equity-related securities in the future at a time, in a place and on terms TAT deems appropriate.
Risks Relating to Our Location in Israel
Because TAT has significant operations in Israel, TAT may be subject to political, economic and other conditions affecting Israel that could increase TAT’s operating expenses and disrupt TAT’s business.
TAT is incorporated under the laws of the stateState of Israel, andIsrael. TAT’s executive offices, manufacturing plant andits research and development facilities and manufacturing plant are also located in the State of Israel. As a result, political, economic and military conditions affecting Israel directly influence TAT. Any major hostilities involving Israel, a full or partial mobilization of the reserve forces of the Israeli army, the interruption or curtailment of trade between Israel and its present trading partners, or a significant downturn in the economic or financial condition of Israel could have a material adverse effect on TAT’s business, financial condition and results of operations.
Since theits establishment of the State of Israel in 1948, Israel and its Arab neighbors have engaged in a number of armed conflicts. A state of hostility, varying from time to time in intensity and degree, has led to security and economic problemschallenges for Israel. Major hostilities between Israel and its neighbors may hinder Israel’s international trade and lead to economic downturn. This, in turn, could have a material adverse effect on TAT’s operations and business. In recent years, there washas been an escalation in violence among Israel, Hamas (which controls the Gaza Strip), the Palestinian Authority (which controls in the West Bank) and other groups, as well as an escalation in terrorist attacks since October 2015 and extensive hostilities along Israel’s border with the Gaza Strip such as the missiles fired from the Gaza Strip into Israel during July-Augustthe summer of 2014. Ongoing violence between Israel and the Palestinians as well as tension between Israel and its Arab neighbors and Iran may have a material adverse effect on TAT’s business, financial conditions and results of operations.
Furthermore, there are a number of countries, primarily in the Middle East,Arab and Muslim countries, that restrict or frown upon business with Israel or Israeli companies, and TAT is precluded from marketing its products to these countries. Restrictive laws or policies directed towards Israel or Israeli businessescompanies may have an adverse impact on TAT’s operations, TAT’s financial results or the expansion of TAT’s business.
TAT’s results of operations may be negatively affected by the obligation of its personnel to perform military service.
Many of TAT’s employees and some of TAT’s directors and officerssenior management based in Israel are obligated to perform annual reserve duty in the Israel Defense Forces (“IDF”) and may be called for active duty under emergency circumstances at any time. If a military conflict or war arises, these individuals could be required to serve in the military for extended periods of time. TAT’s operations could be disrupted by the absence for a significant period of one or more of TAT’s executive officers orits senior management, key employees or a significant number of other employees for a significant period due to military service. Any such disruption in TAT’s operations could adversely affect TAT’s business.
Your rights and responsibilities as a shareholder will beare governed by Israeli law and may differ in some respects from the rights and responsibilities of shareholders under U.S. law.
TAT is incorporated under Israeli law. The rights and responsibilities of holders of TAT’s ordinary shares are governed by TAT’s memorandum of association, articles of association and by Israeli law. These rights and responsibilities differ in some respects from the rights and responsibilities of shareholders in typical U.S. corporations. In particular, each shareholder of an Israeli company has a duty to act in good faith and in a customary manner in exercising his or her rights and fulfilling his or her obligations toward the company and other shareholders and to refrain from abusing his power in the company, including, among other things, in voting at the general meeting of shareholders on certain matters. Israeli law provides that these duties are applicable in shareholder votes on, among other things, amendments to a company’s articles of association, increases in a company’s authorized share capital, mergers and interested party transactions requiring shareholder approval. In addition, a controlling shareholder of an Israeli company, or a shareholder who knows that he or she possesses the power to determine the outcome of a shareholder vote or who has the power to appoint or prevent the appointment of a director or officer in the company, has a duty of fairness toward the company. However, Israeli law currently does not define the substance of this duty of fairness. Because Israeli corporate law has undergone extensive revision in recent years, there is relatively little case law available to assist in understanding the implications of these provisions that govern shareholder behavior.
Israeli law may delay, prevent or make difficult an acquisition of TAT, which could prevent a change of control and, therefore, depresses the price of TAT’s shares.
Israeli corporate law regulates mergers, requires tender offers for acquisitions of shares above specified thresholds, requires special approvals for transactions involving directors, officers or significant shareholders and regulates other matters that may be relevant to these types of transactions. Furthermore, Israeli tax considerations may make potential transactions unappealing to TAT or to some of TAT’s shareholders. These provisions of Israeli law may delay, prevent or make difficult an acquisition of TAT, which could prevent a change of control and therefore depress the price of TAT’s shares.
Investors and TAT’s shareholders generally may have difficulties enforcing a U.S. judgment against TAT, TAT’s executive officers and directors or asserting U.S. securities laws claims in Israel.
TAT is incorporated in Israel and the majority of TAT’s executive officers and directors reside outside the United States. Service of process upon them may be difficult to effect within the United States. Furthermore, many of TAT’s assets and most of the assets of TAT’s executive officers and directors are located outside the United States. Therefore, a judgment obtained against TAT or certain of its executive officers and directors in the United States, including one based on the civil liability provisions of the U.S. federal securities laws, may not be collectible in the United States and may not be enforced by an Israeli court. It also may be difficult for you to assert U.S. securities law claims in original actions instituted in Israel. However, subject to certain time limitations and other conditions, Israeli courts may enforce final judgments of United StatesU.S. courts for liquidated amounts in civil matters, including judgments based upon the civil liability provisions of those and similar acts.
As a foreign private issuerissuer whose shares are listed on the NASDAQ, Global Market, TAT may follow certain home country corporate governance practices instead of certain NASDAQ requirements.
As a foreign private issuer whose shares are listed on the NASDAQ, Global Market, TAT is permitted to follow certain home country corporate governance practices instead of certain requirements of the NASDAQ Marketplace Rules. A foreign private issuer that elects to follow a home country practice instead of such requirements must submit to NASDAQ in advance a written statement from an independent counsel in such issuer’s home country certifying that the issuer’s practices are not prohibited by the home country’s laws. In addition, a foreign private issuer must disclose in its annual reports filed with the Securities and Exchange CommissionSEC or on its website each such requirement that it does not follow and describe the home country practice followed by the issuer instead of any such requirement. As a foreign private issuer listed on The NASDAQ Global Market, TAT may follow TAT’s home country law, instead of the NASDAQ Marketplace Rules, whichFor example, Israel’s corporate governance or laws require that TAT obtain shareholder approval for certain dilutive events, such as for the establishment or amendment of certain equity basedequity-based compensation plans, an issuance that will result in a change of control of TAT, certain transactions other than a public offering involving issuances of a 20% or more interest in TAT and certain acquisitions of the stock or assets of another company.company, which are not required by NASDAQ.
Item 4.Information on the Company
History and Development of TAT
TAT was incorporated under the laws of the State of Israel in April 1985 under the name Galaxy Graphics Ltd. TAT changed its name to Galagraph Ltd. in August 1986 and to TAT Technologies Ltd. in May 1992. TAT is a public limited liability company under the Israeli Companies Law 1999-5759, or the (“Israeli Companies Law,Law”), and operates under this law and associated legislation. TAT’s registered offices and principal place of business are located at Re’em Industrial Park, Neta Boulevard, Bnei Ayish, Gedera 70750,Giborei Israel 7, Netanya 4250407 Israel, and its telephone number is +972-8-8268-500.+972-8-862-8500. TAT’s address on the Internetwebsite is
www.tat-technologies.com. The information on TAT’S website is not incorporated by reference into this annual report.
www.tat-technologies.com. The information on TAT’S website is not incorporated by reference into this annual report.
TAT was founded in 1985 to develop the computerized systems business of its then parent company, TAT Industries Ltd. (or (“TAT Industries)Industries”), a publicly - heldpublicly-held Israeli corporation then engaged in the manufacture and sale of aeronautical equipment. In December 1991, TAT acquired the heat exchange operations of TAT Industries and in 2000, TAT purchased the remaining operations of TAT Industries relating to the manufacture and maintenance of aviation accessories and leased certain of its properties.
25
In March 1987, TAT completed the initial public offering of its securities in the United States. TAT was listed on the NASDAQ Global Market (then known as the NASDAQ National Market) from its initial public offering until July 1998 when the listing of TAT’s ordinary shares was transferred to the NASDAQ Capital Market. On June 24, 2009, TAT’s ordinary shares resumed trading on the NASDAQ Global Market. Since August 2005 TAT’s shares have been traded also on the Tel Aviv Stock Exchange (TASE).TASE.
Today TAT is a provider of a variety of servicessolutions and productsservices to the commercial and military aerospace and ground defense industries through its Gedera facility, as well as through its subsidiaries, Limco and Piedmont in the U.SU.S. (Limco and Piedmont are held by TAT through Limco-Piedmont, Inc. (“Limco-Piedmont”)) and Turbochrome Ltd. in Kiryat Gat, Israel.
In 1993, TAT acquired Limco air repair, INCAirepair, Inc. (“Limco”). Limco provides heat transfer services and products to the aerospace industry.Located in Tulsa, Oklahoma, Limco’s Federal Aviation Administration, or FAA, certifiedFAA-certified repair station (located in Oklahoma) provides MRO services for airlines, air cargo carriers, maintenance service centers and the military, especially for heat transfer products.components. In addition to its MRO services, Limco is an OEM of heat transfer solutions for aircraft and system manufacturers and other selected related products.
In 2005, Limco acquired Piedmont, Aviation Component Services, LLC (“Piedmont”), a company certified by the FAA to perform maintenance, repair and overhaulMRO services of APUs and landing gears. Located in Greensboro, North Carolina, Piedmont’s FAA - certifiedFAA-certified repair station (located in North Carolina) provides MRO services for airlines, air cargo carriers, maintenance service centers and the military, especially for landing geargears and auxiliary power units (APU).APUs.
In July 2007, Limco-Piedmont completed an initial public offering of its shares of Commoncommon stock and Limco-Piedmont’s shares were listed on the NASDAQ Global Market (symbol: LIMC) until July 2, 2009, when TAT acquired all of the publicly held shares of Limco-Piedmont (approximately 32% of Limco-Piedmont’s total shares) in a stock for stock merger. As a result of such merger, Limco-Piedmont again became a wholly-owned subsidiary of TAT.
Following a series of transactions occurring between March 2008 and March 2009, TAT acquired 70% control of Bental Industries Ltd. In February 2014, TAT sold its entire interest in Bental Industries Ltd to Bental Investments Agshah Ltd. for an aggregate consideration of $5 million.
On December 4, 2009, the Company,TAT, through its subsidiary Piedmont, signed an investment agreement with FAvS. According to the agreement, Piedmont was issued 288,334 shares of Class B Commoncommon stock of First Aviation Services Inc., or FAvS, representing 37% of FAvS' then share capital (total number of shares acquired iswas subsequently adjusted as result of a 1 for 20 reverse stock split) and $ 750 thousand$750,000 of FAvS Preferredpreferred shares (entitlement(entitled to cash dividends at an annual rate of 12% payable quarterly or to additional Preferredpreferred shares at an annual rate of 15%) in return for Piedmont's propeller and parts businesses.
On March 11, 2015, Piedmont Aviation Component Services, LLC , an indirect subsidiary of TAT, entered into an agreement to sellsold 237,932 shares of Class B Common Stockcommon stock of FAvS representing 23.18% of FAvS' share capital and its entire holdings (16,253) of FAvS' Series A Preferred stock. The purchase price for the Class B Shares is $8.40 per Class B Shares,preferred stock for an aggregate purchase priceinsignificant amount. As of $1,999, and the purchase price for the Series A Preferred stock is $100 per Preferred Share, for an aggregate purchase price of $1,625. The total gain from the sale of FAvS' stock is $1,395. The companyDecember 31, 2018, TAT owns approximately 5% of FAvS’ after the transaction.issued and outstanding share capital.
In October 2015, TAT acquired Turbochrome, Ltd. (“Turbochrome”), a company certified by the FAA and EASA to perform overhaul and coating of jet engine components, including turbine vanes and blades and fan blades.
In November 2015, TAT entered into an agreement with Engineering Holding of Moscow, Russia, to establish a new maintenanceMRO facility for heat exchangers in Russia. The new company, TAT-Engineering LLC, is based in Novosibirsk’s Tolmachevo airport. TAT - Engineering LLC shall provideairport and is providing services of minor repair, overhaul and recore for heat transfer products.components in Russia and the CIS. According to the joint venture agreement, TAT owns 51% of TAT-Engineering's shares and the remaining 49% are held by Engineering Holding of Moscow.Engineering.
A. Business Overview
Overview
TAT Technologies Ltd. is a leading provider of servicessolutions and productsservices to the commercial and military aerospace and ground defense industries.industries focused mainly on two product areas and services: Thermal Management and Power and Actuation. TAT operates under four segments:business unit: (i) original equipment manufacturing or “OEM”OEM of heat transfer solutions and aviation componentsaccessories through its Gedera facility; (ii) MRO services for heat transfer servicescomponents and productsOEM of heat transfer solutions through its Limco subsidiary; (iii) maintenance, repair and overhaul or “MRO”MRO services for aviation components especially in the area of landing gear and auxiliary power units (APU),through its Piedmont subsidiary; and (iv) overhaul and coating of jet engine components.
components through its Turbochrome subsidiary.
TAT’s activities in the area of OEM of heat transfer solutions and aviation componentsaccessories through its Gedera facility primarily include the design, development and manufacture of (i) a broad range of heat transfer products,solutions, such as pre-coolers heat exchangers and oil/fuel hydraulic heat exchangers, used in mechanical and electronic systems on-boardon board commercial, military and business aircraft; (ii) environmental control and power electronics cooling systems installed on board aircraft and ground applications; and (iii) a variety of other electronic and mechanical aircraft accessories and systems such as pumps, valves, and turbine power units.
TAT’s activities in the area of heat transfer servicesMRO and products include the maintenance, repair and overhaulOEM of heat transfer equipmentsolutions include the MRO of heat transfer components and to a lesser extent, the manufacturing of certain heat transfer products.solutions. TAT’s Limco subsidiary operates FAA certifiedan FAA-certified repair station, which provides heat transfer MRO services and products for airlines, air cargo carriers, maintenance service centers and the military.
TAT’s activities in the area of MRO services for aviation components include the maintenance, repair and overhaulMRO of auxiliary power units (APUs),APUs, landing geargears and other aircraft components. TAT’s Piedmont subsidiary operates an FAA certifiedFAA-certified repair station, which provides aircraft component MRO services for airlines, air cargo carriers, maintenance service centers and the military.
TAT’s activities in the area of jet engine overhaul through its Turbochrome facility includes the overhaul and coating of jet engine components, including turbine vanes and blades, fan blades, variable inlet guide vanes and afterburner flaps.
OEM of Heat Transfer Solutions and Aviation ComponentAccessories (Gedera)
TAT is an OEM of Heat Transfer Solutionsheat transfer solutions and Aviation Componentsaviation accessories to the commercial and military aerospace and ground defense industries, primarily through its Gedera facility. The main OEM activity ofat our Gedera facility is the design and manufacture of a comprehensive line of heat exchangers and cold plates, or heat transfer products.plates. Heat transfer productssolutions facilitate removal and dissipation of heat generated during the operation of mechanical and electronic systems. Gedera’s heat transfer productssolutions are generally integrated into complete cooling systems. Using Gedera’sproprietary technological expertise, Gedera designswe design each of its heat transfer productsproduct to meet the specific space, power, performance and other needs of itsour customers. Gedera’s heat transfer productssolutions are marketed worldwide for applications in commercial and military aircraft and electronic systems, the primary users of such equipment. Gedera’s customers include, Liebherr-Aerospace Toulouse S.A. (“Liebherr”), or Liebherr, Boeing Aircraft Company or Boeing,(“Boeing”), Israel Aerospace Industries, or IAI, Cessna Aircraft Company, or Cessna,(“IAI”), Textron Aviation (“Cessna”), Pilatus Aircraft Ltd or Pilatus,(“Pilatus”), Embraer Empresa Brasileira de Aeronáutica S.A. (“Embraer”), or Embraer, Eaton Aerospace LLC or Eaton,(“Eaton”), Parker Hannifin Corporation or Parker,(“Parker”), Bell Helicopter, as well as the United StatesU.S. Air Force, United StatesU.S. Army, and Navy.U.S. Navy and other air forces from around the world. Such supply contracts are generally long termlong-term engagements that may have terms of ten years or more.
As part of its OEM activities, Gedera is also engaged in the design, development and manufacture of complete cooling systems. This product line principally includes cooling systems for electronic systems (used in airborne military platforms) and ground cooling systems (used in military facilities, tents, vehicles and other military applications).
In addition, Gedera designs, develops and manufactures aviation and flow control accessories. These accessories include components, such as valves and pumps. Customers for Gedera’s aviation accessories include Lockheed-Martin Corp,Lockheed Martin Corporation (“Lockheed Martin”), Boeing, Continental Motors (“Continental”), the IsraeliIsrael Air Force (“IAF”), IAI, Elbit Systems or Elbit,(“Elbit”), Rafael Advanced Defense Systems or Rafael,(“Rafael”), as well as the United StatesU.S. Air Force and Navy.
U.S. Navy and other air forces from around the world.Gedera also provides limited MRO services forto military customers, mainly for aviation accessories as well as for certain heat transfer products.solutions. Gedera currently overhauls emergency power units, hydrazine tanks, jet fuel starters, cooling turbines and various valves for the F-16 fighter aircraft. In addition, Gedera overhauls anti-icing valves and starters for the Blackhawk and Apache helicopters. The customers for Gedera’s MRO services include the Israel Air Force,IAF, IAI, various NATO countries, as well as the United StatesU.S. Air Force, United StatesU.S. Army and U.S. Navy.
Gedera relies on highly qualified personnel and strong engineering, development and manufacturing capabilities that enable it to support its customers from the early program development phase to prototype delivery.
29
TAT estimates the size of the markets in which Gedera operates to be significant based on the scope of development projects and purchasing processes of its customers. Many of the projects Gedera is engaged in are lengthy and complex, which account for its long termlong-term supplier relationships and the customer loyalty it enjoys. TAT plans to expand its Gedera operations in the OEM segment, among other things, by transitioning from components manufacture toincreasing the scope of work with its existing strategic customers, establishing relationships with new customers, increasing its capabilities in complete systems/sub systems manufacture,subsystems manufacturing, and by targeting strategic territories with high commercial potential.
MRO Services for Heat Transfer ServicesComponents and ProductsOEM of Heat Transfer Solutions (Limco)
Through its Limco subsidiary Limco, TAT provides MRO services and productsOEM services to the aerospace industryand ground defense industries in the field of heat transfer. Limco’s FAA certifiedFAA-certified repair station provides aircraft component MRO services for airlines, OEMs, air cargo carriers, maintenance service centers and the military. Limco is also certified by the European Aviation Safety Agency (EASA),EASA, the Civil Aviation Administration of Thailand (DCA)(“DCA”), the Civil Aviation Administration of Indonesia (DGCA)(“DGCA”), the Civil Aviation Administration of Brazil (ANAC) and recently by the Civil Aviation Administration of China (CAAC)(“CAAC”). Limco has also recently achievedattained NADCAP certification for non-destructive testing.dye penetrant testing, welding and heat treating. Limco specializes in MRO services for components of aircraft, such as heat transfer productscomponents and ozone converters. Generally, manufacturer specifications, government regulations and military maintenance regimens require that aircraft components undergo MRO servicing at regular intervals or as necessary. Aircraft heat exchangerstransfer components typically require MRO services, including repairs and installation of replacement units, after threetwo to five years of service or sooner if required. Aircraft manufacturers typically provide warranties on new aircraft and their components and subsystems, which may range from one to five years depending on the bargaining power of the purchaser. Warranty claims are generally the responsibility of the OEM during the warranty period. Limco’s business opportunity usually begins upon the conclusion of the warranty period for these components and subsystems. Limco’s customers include major USU.S. domestic and international airlines, air cargo carriers, maintenance service centers, OEMs such as commercial and military aircraft manufacturers and defense contractors, and the U.S. governmentArmed Forces (Army, Air Force, Navy and Coast Guard). Such customers typically enter into MRO contracts with Limco whichthese types of customers are generally long termlong-term engagements thatand may have terms of one to five years or more.
Limco enjoys a strong reputation among customers for its competitive pricing and fast turnaround time. It is recognized by leading OEMs of aerospace products to provide MRO services for their systems.heat transfer solutions. For example, Limco is a well-recognized UTCCollins Aerospace Systems )Hamilton(Hamilton Sundstrand) repair center, providing MRO services for many of its heat transfer products. Limco’s repair station is certified by the FAA and EASAsolutions.
30
In addition to its MRO services, Limco also manufactures, on an OEM basis, heat transfer productssolutions used in commercial, regional, business and military aviation platforms, on an OEM basis.platforms. Customers for Limco’s heat transfer productssolutions include Boeing, the U.S. Army, U.S. Air Force, Navy,Defense Supply Center, Parker Hannifin, Raytheon Boeing,Company (“Raytheon”), BAE Systems, Bell Helicopter, Vought Aircraft, Enstrom Helicopter, Cobham, Lockheed Martin,Triumph Aerostructures, Northrop Grumman Corporation and Gulfstream.Gulfstream Aerospace Corporation.
TAT estimates the size of the markets in which Limco operates to be significant based on the number of aircraft requiring MRO services provided by Limco along with the customer loyalty Limco enjoys. TAT plans to expand its Limco operations, in the MRO segment, among other things, by developing OEM and MRO capabilities for additional types of heat transfer products with significant commercial potential.
MRO Services for Aviation Components (Piedmont)
Through its subsidiary Piedmont, Aviation, TAT provides MRO services for aviation components to the aerospace industry. Piedmont’s FAAFAA- and EASA certifiedEASA-certified repair station provides aircraft component MRO services for commercial airlines, business jets, air cargo carriers, maintenance service providers and to governmentas well as governments and military operatorsforces worldwide. Piedmont specializes in MRO services for aircraft components, of aircraft, including Auxiliary Power Units (APUs)APUs, landing gears and landing gears.Machining and Plating services (MPG). Generally, manufacturer specifications, government regulations and military maintenance regimens require that aircraft components undergo MRO servicing at regular intervals or as necessary. Aircraft components typically require MRO services, including repairs and installation of replacement units, after three to ten years of service or sooner if required. Aircraft manufacturers typically provide warranties on new aircraft and their components and subsystems, which may range from one to five years. Warranty claims are generally the responsibility of the OEM during the warranty period. Piedmont’s business opportunity usually begins upon the conclusion of the warranty period for these components and subsystems. Piedmont’s customers include U.S. domestic and international airlines, air cargo carriers and maintenance service providers. Such customers typically enter into MRO contracts with Piedmont whichthese types of customers are generally long termlong-term engagements that may have terms of one to ten years or more.
Piedmont is licensed by Honeywell as an authorized repair center to provide MRO services for several types of its APU models. Piedmont has excellent working relationships with the major landing gear manufacturers as well.
In 2021 Piedmont relies on highly qualified personnelbegan providing its customers with strong manufacturing, engineeringAPU engine leasing services with respect to the APU 331-250 and development capabilities that enable it to provide excellent MRO services.331-500 models.
31
TAT estimates the size of the markets in which Piedmont operates to be significant based on the number of aircraft requiring MRO services provided by Piedmont. TAT plans to expand its Piedmont operations in the MRO segment by using Piedmont’s experience and reputation to develop MRO capabilities for additional types of APU and landing geargears applications as well as other aircraft systems/components with significant commercial potential and by offering additional supplementary services such as machining, plating, and grinding or MPG.(“MPG”).
Piedmont’s extensive experience of Piedmont Aviation in the repair and overhaul of APUAPUs and landing systems includes a comprehensive involvement in the industry supply chain. In addition to theits MRO services, provided by Piedmont the company is active worldwide in the exchange, lease and individual component parts supply of its APU and landing gear products. Through its owna network of industry partners and through well-known aerospace parts distributors, Piedmont’s activity in the sale of parts is a robust element of the overall enterprise.its business. Piedmont’s quality systems are AS9110 and NADCAP for non-destructive testing.
Overhaul and Coating of Jet Engine Components (Turbochrome)
Through its subsidiary Turbochrome, TAT provides MRO services for jet engine components to the aerospace industry. Turbochrome’s FAAFAA- and EASA certifiedEASA-certified repair station provides its services mainly to maintenance service centers, airlines and the military. Turbochrome specializes in MRO services for engine components such as turbine vanes and blades, compressor vanes and blades, fan blades and after burner flaps. Generally, manufacturer specifications, government regulations and military maintenance regimens require that engine components undergo MRO servicing at regular intervals or as necessary. Commercial engine components typically require MRO services after three to five years of service or sooner if required. Engine manufacturers typically provide warranties on new engines and their components and subsystems, which may range from one to five years depending on the bargaining power of the purchaser. Warranty claims are generally the responsibility of the OEM during the warranty period. Turbochrome’s business opportunity usually begins upon the conclusion of the warranty period for these components. Turbochrome’s customers include domestic and international airlines, maintenance service centers and the military.
Turbochrome also specializes in the manufacturedmanufacturing of coating powders for(for pack cementation aluminide coatingscoatings) and masking materials to prevent(for the prevention of coating in defined areas. These materials areareas) used in the aviation industry. Turbochrome provides suchthese materials to OEMs and to maintenance service centers.
TAT estimates the size of the markets in which Turbochrome operates to be significant based on the number of jet engines requiring MRO services provided by Turbochrome.services. Turbochrome plans to expand its operations in the MRO segment by using Turbochrome’s experience and reputation to develop MRO capabilities for additional types of jet engine components with significant commercial potential.
Turbochrome’s quality system complies with ISO 9001 and AS9100, and with EASA part 145 and FAA FAR 145 for the civil parts.
In June 2020, Company's management decided to discontinue the JT8D engine blades reconditioning activity as part of a strategic change in Turbochrome's business to focus on new capabilities to provide services to newer types of engines. The discontinued operation is related to the JT8D engine blades reconditioning activity in Turbochrome , which constitutes a material portion of Turbochrome’s revenues. In 2021 the company continued with the fade out plan of the JT8D engine blade reconditioning activity. In 2021 the company continued with the fade out plan for the JT8D engine blade reconditioning activity.
TAT-Engineering LLC
In November 2015, we signed an agreement with Russian-based Engineering Holdings Ltd of Moscow (“Engineering”), to establish a new facility for the provision of MRO services for heat transfer components. The new company, TAT-Engineering LLC, is based in Novosibirsk’s Tolmachevo airport. The new entity was established in January 2016 and is currently operating under FAA certifications and obtained FAA high-level repair approvals. Current efforts are focused on marketing initiatives targeting the major Russian and CIS airlines and maintenance stations.
33
Business Strategy
TAT aims to be the trusted partner to its strategic customers, delivering differentiated products and services in selected, high barrier-to-entry, markets. This will enable TAT to develop the long-term high-value relationships it strives to have with its customers to effectively complete and continue grow business and improve profitability. Currently, TAT’s principalfocus is on two main markets: thermal management solutions and services and Power and Actuation solutions and services.
Execution of TAT’s strategy is as follows:based on the following principles:
| • | Enhancing OEM |
| • | Expand the scope of MRO services |
| • | Increasing |
| • | Effective synergy among group members — |
| • | Organic growth and M&A — |
34
Products and Services
OEM of Heat Transfer Solutions and Aviation ComponentsAccessories
Through its Gedera facility, TAT manufactures a wide range of heat transfer productssolutions used onboardon board aircraft, air conditioning systems, environmental control systems and cooling systems for electronics for military use. These products/systemssolutions are manufactured in compliance with all of the stringent quality assurance standards that apply to the manufacture of aircraft parts. Gedera’s quality system complies with ISO 9001, AS9100, Boeing quality systems approval D6-82479 and FAR 21.303 (the FAA standard for Parts Manufacturer Approval). and NADCAP for non-destructive testing and welding.
Heat Transfer ProductsSolutions
In the aerospace industry, there is a constant need for improvements in performance, weight, cost and reliability. In addition, as electronic systems become smaller and more densely packed, the need for sophisticated and efficient heat transfer components used to provide the cooling functions becomes more critical. Using Gedera’s technological expertise, TAT believes it is well positioned to respond to these industry demands through continued new product development and product improvements.
Gedera’s principal heat transfer productssolutions include heat exchangers and cold plates. Typically, air-to-air heat exchangers cool a jet engine’s bleed air which, when cooled, is then used in the aircraft’s air conditioning, pressurization and pneumatic systems. The liquid-to-air heat exchangers cool liquids such as engine oil, hydraulic oil and others used in other systems.
35
Gedera provides a one stop shopone-stop-shop for all of the different types of heat transfer products.solutions. Gedera’s heat exchangers are generally sold forpriced between approximately $2,000 and $40,000$45,000 per unit. A significant portion of Gedera’s heat transfer productssolutions are sold to customers in connection with the original manufacture or retrofitting of particular aircraft equipment. Gedera generally enters into long-term supply contracts with its customers, which require Gedera to supply heat transfer products as part of a larger project.
Gedera also manufactures other heat transfer equipment,solutions, such as cooling chassis, heat sinks and cold wallsplates (which may be air-to-air, liquid-to-air or liquid-to-liquid), to control and dispose heat emitted by the operation of various electronic systems. Such products are currently utilized mainly in radar systems, avionics, electronic warfare systems and various pods for targeting, navigation and night vision.
Aviation and Flow Control Accessories
Gedera is also engaged in the design, development, manufacture and manufacture ofMRO services for aviation and flow control accessories. These accessories include components such as valves and pumps. Gedera’s customers for the design, development and manufacture of aviation and flow control accessories include Lockheed-Martin, Boeing, Continental, the Israel Air Force, IAI, Rafael as well as the U.S. Air Force and Navy.
Cooling and Air-ConditioningAir Conditioning Systems
Gedera is also engaged in the design, development and manufacture of complete environmental control systems and cooling systems. This product line includes ground cooling systems used in military facilities, tents, vehicles and other military applications. It also includes Vapor Cycle air conditioning systems (or ECS — Environmental Cooling Systems) used in light aircraft. Gedera offers mobile cooling and air conditioning solutionsmainly for military applications such as mobile command and control units, command and control vehicles, armored vehicles, mobile broadcast units, mobile hospitals, etc. In addition, Gedera designs, develops and manufactures power electronics cooling systems based on customer specifications, while providing a complete engineering solution in compliance with strict civil aviation standards. Gedera’s systems are used in Israel and abroadglobally and are tested under strict standards.
MRO Services for Heat Transfer ServicesComponents and ProductsOEM of Heat Transfer Solutions
MRO Services for Heat Transfer ProductsComponents
Through its Limco subsidiary in the U.S., TAT provides MRO services for heat transfer products.components. The demand for MRO services is driven by the size and age of the aircraft fleet (including new aircrafts entering into service), aircraft utilization and regulations set OR promulgated by the FAA and other governmental authorities.
Due to the increased maintenance costs of their aging fleets many carriers are seeking ways to reduce costs, minimize down-time, increase aircraft reliability and extend time between overhauls. One of the ways they are accomplishing these goalsway to accomplish this goal is through the outsourcing of more of their maintenance and support functions to reliable third parties. Limco also believesFurthermore, we believe that commercial carriers who have mademaking the decision to outsource their MRO requirements are searching for MRO service providers with a wide-range of service capabilities. Such MRO service providers allow the carriers to concentrate their outsourcing of MRO services to a select group of third party providers. The global military aircraft fleet also presents similar opportunities for MRO service providers. We believe that an aging military fleet and the increased use of upgrade programs aimed at extending the useful life of military aircraft will provide continued MRO growth opportunities.
Limco specializes in the repair and overhaul of heat transfer components. These components include heat exchangers, oil coolers, pre-coolers, reheaters, condensers, water separators, fuel heaters, evaporators and ozone converters.
Limco is continually expanding its MRO capabilities based on market need and/or customer request. Limco’s capabilities include heat transfer components used in aircraft and systems manufactured by Airbus, Boeing, Bombardier, Cessna, Embraer, Lockheed Martin, Fokker, Liebherr-Aerospace, Collins Aerospace, Honeywell Aerospace and others.
One of Limco’s operational strengths and competitive advantages is the close cooperation with TAT’s Gedera facility. Through Gedera’s core manufacturing capabilities and engineering expertise, Limco enjoys a constant supply source of cores of the highest quality necessary in order to perform its MRO services for heat transfer components. In addition, Limco benefits from Gedera’s varied engineering and development capabilities relevant to Limco’s services in the field of heat transfer components. As part of the TAT's restructuring plan announced in March 2021, the Company will enhance Limco's heat exchange cores manufacturing capabilities by, among other things, strengthening Limco’s employees’ engineering knowledge, recruitment and training of employees and investment in new machines and infrastructures.
37
Limco performs MRO services at its repair station in Tulsa, Oklahoma which has ISO9001, AS9110 and AS9100 certification, NADCAP certification for dye penetrant testing, welding and heat treating,, and is licensed to provide MRO services by the FAA and EASA, as well as by the civil aviation Administrations of Thailand, Indonesia and China.
Limco offers different or various MRO services for heat transfer components. If the damage is significant, Limco will remanufacture the unit, which generally entails replacing the core matrix of the damaged or old heat transfer component in lieu of replacing the entire unit with a new one. Limco designs and develops these customized remanufactured units as a cost-effective alternative to new part replacement. In the event of less severe damage, Limco will either overhaul or repair the unit as necessary. Re-manufactured units carry warranties which are often equal or better than those provided to new units.
OEM Authorizations and Licenses
Limco believes that establishing and maintaining relationships with OEMs of aircraft systems and components is an important factor in achieving sustainable success as an independent MRO service provider. OEMs grant independent MRO service providers authorization to perform repair and overhaul services on their behalf. OEMs generally grant very few authorizations and maintain tight controls over their authorized MRO service providers in order to maintain high quality of service to their customers. Obtaining OEM authorization requires sophisticated technological capabilities, experience-based industry knowledge and substantial capital investment. Furthermore, Limco believes that service providers that have OEM authorization gain a competitive advantage as they typically receive discounts on parts, technical information and OEM warranty support. Limco is an independent MRO service provider that is a well-recognized repair center of Collins Aerospace (Hamilton Sundstrand), one of the largest heat transfer solutions manufacturers in North America or in the United States.
OEM of Heat Transfer Solutions
In addition to its MRO services, Limco also acts as an OEM manufacturer of heat transfer solutions used mainly in military aircraft and other ground applications and to a lesser extent, in commercial, regional and business aircraft. Limco specializes in the design and manufacture of highly efficient heat transfer solutions, which are designed to meet stringent constraints such as size, weight and applicable environmental conditions. These units include heat exchangers, oil coolers, precoolers, reheaters, condensers, fuel heaters and evaporators.
38
Limco also manufactures demineralizer systems for U.S. Navy vessels, including ships and nuclear submarines. Limco currently offers tens of OEM parts to the aerospace and ground defense industries. These parts are manufactured in compliance with the stringent quality assurance standards that apply to the manufacture of aircraft and military parts.
Limco’s quality systems are ISO9001, AS9110, AS9100 and NADCAP for non-destructive testing, welding and heat treating and FAR 21.303 (the FAA standard for Parts Manufacturer Approval).
MRO Services for Aviation Components
Through its Piedmont subsidiary, TAT provides MRO services for aviation components, including APUs and landing gear. As previously mentioned, the demand for MRO services is driven by the size and age of the aircraft fleet, aircraft utilization and regulations by the FAA and other governmental authorities.
Due to increased maintenance costs of their aging fleets many carriers are seeking ways to reduce costs, minimize down-time, increase aircraft reliability and extend time between overhauls. One way to accomplish this goal is through the outsourcing of more of their maintenance and support functions to reliable third parties. Furthermore, we also believe that commercial carriers making the decision to outsource their MRO requirements are searching for MRO service providers that offer a wide-range of service capabilities. These MRO service providers allow the carriers to concentrate their outsourcing of MRO services to a select group of third party providers. The global military aircraft fleet also presents similar opportunities for MRO service providers. Limco believesWe believe that an aging military fleet and the increased use of upgrade programs aimed at extending the useful life of aircraftaircrafts will provide continued MRO growth opportunities.
Piedmont specializes in the repair and overhaul of APUs and landing gear.gears. APUs are relatively small, self-contained generators used to start jet engines, usually with compressed air, and to provide electricity, hydraulic pressure and air conditioning while an aircraft is on the ground. In many aircraft, an APU can also provide electrical power during in-flight emergency situations. Landing gears are the structure that support an aircraft on the ground and allow it to taxi, takeoff and land.
39
Piedmont performs MRO services at its repair station in Greensboro, North Carolina, which is licensed by the FAA and EASA and also certified to AS9001 standards.EASA. Piedmont specializes in providing comprehensive repair and overhaul services for APU models manufactured by both Honeywell and Hamilton Sundstrand.Sundstrand, two leading OEMs in the United States. In addition, Piedmont provides full repair, overhaul, machining, plating and grinding services for landing gear systems for commercial and military aircraft. The companyPiedmont has a richlong history in providing landing gear MRO services for regional airliners, including aircraft manufactured by Bombardier (CRJ 100/200/Dash8), the French-Italian ATR (42/72), Gulfstream (G4), Lockheed martin (P3/C130) and the Brazilian Embraer (E170/E190).
OEM Authorizations and Licenses
Piedmont believes that establishing and maintaining relationships with OEMs of aircraft systems and components is an important factor in achieving sustainable success as an independent MRO service provider. OEMs grant participants in the overhaul and repair services marketindependent MRO service providers authorizations or licenses to perform repair and overhaul services on the equipment they manufacture. OEMs generally grant few authorizations or licenses and maintain tight controls over their authorized and licensed MRO service providers, in order to maintain high quality of service to their customers, and generally grant few authorizations or licenses.customers. Obtaining OEM authorizations requires sophisticated technological capabilities, experience-based industry knowledge and substantial capital investment. Piedmont believes that service providers that have received OEM authorizations and licenses gain a competitive advantage becauseas they typically receive discounts on parts, technical information, OEM warranty support and use of the OEM name in marketing. Piedmont is an authorized repair station licensed by Honeywell, the largest manufacturer of APUs, for several of its APU models.
40
Machining, Plating and Grinding, or MPG Services
Piedmont has extended its services to include the provision of MPG services, either as supplementary to its traditional MRO services or as stand-alone services. Piedmont believesWe believe that establishing and maintaining customer relationships with customers to itsour MPG shop is an important factor in achieving sustainable success as an independent MRO service provider and creates a competitive advantage.
TAT estimates the size of the markets in which Turbochrome operates to be significant based on the number of jet engines requiring MRO services provided by Turbochrome. Turbochrome plans to expand its operations in the MRO segment by using Turbochrome’s experience and reputation to develop MRO capabilities for additional types of jet engine components with significant commercial potential.
Turbochrome’s quality system complies with ISO 9001 and AS9100, and with EASA part 145, FAA FAR 145 for the civil parts, the Israel Laboratory Accreditation Authority under ISO/IEC 17025:20 and NADCAP for 3 manufacturing procedures.
41
Manufacturing of masking and coating materials
Through its Turbochrome facility, TAT manufactures a wide range of masking and coating materials for the aviation industry. These products are manufactured in compliance with all of the stringent quality assurance standards that apply to the maintenance of aircraft engine components.
Customers
General
TAT targets botha broad range of customers within the commercial and defense markets for aviationmilitary aerospace and ground applications.defense industries. Our customers include commercial manufacturers of military equipment, commercial airlines, aircraft manufacturers, military forces, the defense industries,industry, and other manufacturers of electronic systems, aviation units and machinery in the U.S.,United States, Europe, CIS, Asia, SouthLatin America and Israel. During 20152021, TAT had revenues generated by more than 500 customers worldwide.
Major Customers
OEM Customers
TAT, primarily through its Gedera facility, sells its OEM productssolutions and systems to commercial and military aircraft manufacturers and defense contractors and to the U.S. and Israeli governments.
Partial lists of OEM customers are set in the following table:
| Aircraft manufacturers | Boeing, |
| System manufacturers/integrators and |
The development projects and purchasing processes of many of TAT’s OEM customers are lengthy and complex and accordingly, with some customers, TAT enters into frame agreements that determine certain legal conditions, but under which the customer is not obligated to purchase any quantity of products. Typically, customers issue purchase orders with the required supply quantity, price, lead times and other related terms.
42
MRO Customers
TAT services MRO customers primarily through Limco, Piedmont and Turbochrome, including major U.S. domestic and international airlines, air cargo carriers, maintenance service centers, the U.S. military and navyArmed Forces and other military air forces.forces from around the world.
TAT’s partial list of MRO customers is set forth in the following table:
| U.S. Domestic and | |
| Maintenance service centers | Fokker, Honeywell International, Kellstrom Commercial, Aero Kool, Lufthansa Technik, UTAS-Hamilton Sundstrand, SR Technics, Embraer, Evergreen Aviation Component Services, Turkish Technic, Delta Tech Ops, ST Aerospace Engineering, , Gulfstream, IAI, Aerothrust, Summit Aviation, Haeco Americas, Jet Engine Technologies, Turbine Engine Solution, Turbine Engine Center and |
| U.S. Army, U.S. Air Force and U.S. Navy; Israeli |
Military Contracts
Many of TAT’s military contracts are competitively bid and awarded on thea competitive basis ofbased on technical merit, personnel qualifications, experience and price. TAT also receives some contract awards involving special technical capabilities on a negotiated, noncompetitive basis due to TAT’s technical capabilities.
TAT provides products under government contracts that usually require performance over a period of several months to several years. Long-term contracts for the U.S. military may be conditioned upon continued availability of congressional appropriations. Variances between anticipated budget and congressional appropriations may result in a delay, reductionmodification of scope or termination of these contracts.
The vast majority of the governmental contracts to which TAT is party to are fixed-price contracts, some of which contain fixed pricefixed-price escalation mechanism. Under these contracts, TAT agrees to perform specific work for a fixed price and, accordingly, realizes the benefit or detriment to the extent that the actual cost of performing the work differs from the contract price. The allowable government contract costs and fees of TAT are subject to audit and may result in non-reimbursement of some contract costs and fees. While governments reserve the right to conduct further audits, audits conducted for periods through fiscal year 20152019 and 2020 have resulted in no material cost recovery disallowances for TAT.
44
Backlog and Long-Term Agreements
Our backlog includes the following: (i) actual purchase orders, and (ii) our maximalthe maximum estimated sales that we expect to generate from long-term agreements for which we do not have actual purchase orders.orders. It should be noted that inunder these long-term agreements there is no legal obligation from the customer to purchase our products or services, yet typically none of our customers would not sign such an agreement unless there is a specific business opportunity. As such, backlog information may not necessarily be indicative of future sales.
As of December 31, 2015, we had2021, our backlog included: (i) outstanding purchase orders representing an aggregate amount of $42$38 million, and (ii) sales that we expect to generate from long-term agreements (the longest of which is until 2030),2033) for which we haven’thave not yet received yet actual purchase orders in an aggregate amount of $184$257 million.Backlog information may not necessarily represent an indication of future sales.
Product and Service Warranties
TAT provides warranties for its products and services ranging from one to three years, which vary with respect to each contract and in accordance withdepending on the nature of eachthe specific product. To date, TAT’s warranty costs have not been substantial. As of December 31, 2015,2021, the combined warranty reserve for TAT was $324 thousand.$0.2 million.
Competitive Environment
OEM of Heat Transfer Solutions and Aviation Components and Heat Transfer ProductsAccessories
The aerospace and defense OEM industries in general and specifically, the commercial and military aviation markets, are characterized by intense competition and the need to constantly be in the forefront of technological innovations in order to be able to offer advancedtechnologically-advanced and attractive products. Competition in these OEM markets is also based on price, quality and turn-around time.on time delivery. TAT estimates the market size of heat managementtransfer solutions to be significant based on the scope of development projects and purchasing processes of the potential customers. TAT estimates that there is a small number of competing suppliers in the aerospace and defense OEM markets due to the high barriers to enter the aerospace and defense OEM industries,entry to these markets, which include the need for highly qualified and trained personnel, technologically advanced facilities and the need to obtain appropriate governmental approvals, there are a small number of competing suppliers in the markets in which it operates.approvals. The nature of the projects in the commercial and military aviation OEM industry, which are often time consuming and complex, also require long termlong-term supplier relationships and customer loyalty in order to succeed.
45
TAT’s competitors in the global OEM aerospace and defense industries can be divided into two main groups:
Complete system manufacturers that either independently or through subcontractors, design, develop and manufacture complete systems (such as a manufacturer of aircraft hydraulic systems) directly for the platform manufacturer (i.e., for business jets). These companies will typically compete on bids for complete systems and/or projects where the components/products TAT develops are part of the complete system. In such cases, it is very likely that these companies will subcontract to companies such as TAT the design and manufacturing of one or a few components in the system. Although some of these companies have the capabilities to design and manufacture each standalone component in a complete system (i.e., a heat exchanger integrated in hydraulic systems) they usually do not compete with TAT in projects where there is a specific requirement for a stand-alone component.
Component manufacturers, such as TAT, for which the design and manufacture of components (such as heat exchangers or other types of heat transfer solutions) is the main business (and which are normally situated in the “value chain” one tier below the system manufacturers, such as a manufacturer of an aircraft’s hydraulic system and two tiers below the platform manufacturer, such as a manufacturer of a new aircraft). These companies typically compete in projects where there is a specific requirement for a standalone aviation component (such as a heat exchanger or other types of heat transfer solutions) and in tenders by manufacturers of complete systems or products for sub-contractors. Although some of the component manufacturers have the capabilities to design, develop and manufacture a complete system (i.e., environmental control system for a business jet) for a certain platform, these companies usually do not compete on projects for complete systems in which their manufactured component constitutes a small part of the complete system, mainly due to the high barriers to entry and to the difficulty to move up the “value chain” from a component supplier to a whole system manufacturer.
46
The major competitors of TAT in the area of OEM of Heat Transfer Solutions, Aviation Componentsheat transfer solutions and Heat Transfer Productsaviation accessories include manufacturers in the U.S.United States such as Honeywell,the Hughes-Treitler division of Ametek, Inc., Lytron, Inc., Kintex, NiagraNiagara Thermal, UTC Aerospace Systems (Hamilton Sundstrand), Stewart Warner South Wind Corp.,Hamilton Sundstrand, Honeywell International and Triumph Thermal Systems,Systems; manufacturers based in Europe such as I.M.I. Marston, Ltd., Serck Aviation, Secan, BEHRa subsidiary of Hamilton Sundstrand, Safran and Liebherr; and manufacturers based in Asia such as Sumitomo Precision Products from Japan. SuchThese competitors may enjoy competitive advantages over Gedera, such as:
The ability to adapt faster to changes in customer requirements and industry conditions or trends;
Greater access to capital; |
Stronger relationships with customers and suppliers;
Greater name recognition; |
Access to superior technology and greater marketing resources;
Ability to offer complete systems in addition to components; and |
The ability to bundle heat transfer solutions and other aircraft components.
MRO Services for Heat Transfer ServicesComponents
The market for maintenance, repair and overhaul (MRO)MRO services in the field of heat transfer components is highly competitive. Competition in this market is based on price, turnaround time, quality price, and the ability to provide a broad rangebreadth of services and to perform repairs and overhauls rapidly.services. TAT’s global competitors in services in the field of servicing heat transfer components can be divided into two main groups:
Service divisions of OEMs – generally, each OEM of products |
Service centers – which often provide MRO services for a broad range of components and systems. These service centers can compete with manufacturersbe either the in-house maintenance services of complete systems. Such OEM manufacturers can also compete for the provision of MRO services withcommercial airlines or other independent service providers, of MRO services.such as TAT or Limco.
47
For heat transfer MRO services, TAT’s major competitors are the Triumph Accessory Services,Thermal Systems, Lori Heat Transfer Center of Honeywell, Drake Air-Air – Ametek, Honeywell-LORI,Liebherr-Aerospace, American Cooler Service, Elite Aerospace, Hamilton Malaysia, Lufthansa Technik, Meggitt (Elite) and SECAN.others.
| Ability to bundle heat transfer and other aircraft components; |
Access to greater marketing resources;
Access to superior technology; and
Greater resources which allows for better turnaround time.
MRO Services for Aviation Components
The market for MRO services in which Piedmont operates is highly competitive. Competition in this market is based on quality, price, turnaround time and the ability to provide a broad rangebreadth of services and to perform repairs and overhauls rapidly.services. Piedmont’s primary MRO services competitors are the service divisions of OEMs, the in-house maintenance services of a number ofvarious commercial airlines and other independent service providers.providers, such as TAT or Piedmont. For APU and landing gear MRO services Piedmont’s major competitors are Standard Aero Group Inc.Group., Aerotech International, Inc., Honeywell International, Chase Aerospace, Professional Aviation, Messier-Dowty Aerospace (MD), AAR, Corp., Hawker Pacific, APRO and APRO.others.
48
A number of Piedmont’s competitors have inherent competitive advantages. For example, Piedmont competes with the service divisions of large OEMs whowhich in some cases have design authority with respect to their OEM products and are able to derive significant brand recognition from their OEM manufacturing activities. Piedmont also competes with the in-house service divisions of large commercial airlines andwhere there is a strong incentive for an airline to fully utilize the services of its maintenance employees and facilities. Further, Piedmont’s competitors may have additional competitive advantages, such as:
Ability to bundle aviation and other aircraft components;
Stronger relationships with customers and suppliers;
Lower cost structure;
Regional support near customers’ location;
Access to greater marketing resources;
Access to superior technology
Greater access to capital; and
Greater resources which allows for better turnaround time.
Overhaul and Coating of Jet Engine Components
The market for MRO services in which Turbochrome operates is highly competitive. Competition in this market is based on quality, price, level of service and turnaround time. Turbochrome’s primary MRO services competitors are the service divisions of OEMs, the in-house maintenance services of a number ofvarious commercial airlines and other independent service providers.providers, including Safran (Snecma), General Electric, GKN, PAS, Chromalloy Southwest, MCT Japan and others. With respect to Fan Blades, Turbochrome's major competitors are Snecma, General Electric, GKNcoating and PAS. With respect to JT8D, Turbochrome's major competitors are Chromalloy Southwest and MCT Japan. With respect tomasking materials, Turbochrome's major competitor is APV Coatings.
A number of Turbochrome’s competitors have inherent competitive advantages. For example, Turbochrome competes with the service divisions of large OEMs who in some caseswhich may have design authority with respect to their OEM products and are able to derive significant brand recognition from their OEM manufacturing activities. Turbochrome also competes with the in-house service divisions of large commercial airlines and there is a strong incentive for an airline to fully utilize the services of its maintenance employees and facilities. Further, Turbochrome’s competitors may have additional competitive advantages, such as:
The ability to adapt faster to changes in customer requirements and industry conditions or trends; |
49
Better name recognition; |
Ability to bundle jet engine and other aircraft components;
Lower cost structure;
Regional support near customers’ location; |
Access to greater marketing resources;
Access to superior technology; Greater access to capital; and Greater resources which allows for better turnaround time |
Competitive Strengths
We believe that TAT’s success can be attributed to several critical factors, including the following:
Engaging in active efforts to preserve its customer base in existing projects, while working to broaden and increase its involvement with such clients. |
Entering into additional related operating segments that will enable TAT and its subsidiaries to fulfill their growth potential.
Providing customers with the best value, including competitive prices, by tailoring comprehensive service packages that combine the design and planning of an OEM component, the manufacture of such component, and the provision of maintenance services.
Extending MRO capabilities in order to establish a ‘one-stop-shop’ center for comprehensive MRO services for the types of aircraft Limco and/or Piedmont and/or Turbochrome target.
Enhancing our engineering capabilities in order to support customer needs related to new projects and in order to certify MRO services that differ from processes previously approved by the FAA, EASA or other regulatory authorities. This allows shortening the long and complex approval process, streamlining the design and certification process and reducing costs.
50
Leveraging operational efficiencies to achieve shorter delivery times and reduce costs.
Investing in new technologies and manufacturing techniques in the heat transfer solutions product line.
Investing in innovations and improvements aimed at enhancing the quality and performance of our existing solutions and services as well as the development of new products in an effort to strengthen our market position and enter into more advanced platforms.
Engineering
We believe that our engineering capabilities is a strategic core competency and Manufacturing
Gedera’s engineering staff has an extensive knowledge and experience in designing Heat Transfer Products. The lead engineer for each product is in charge of all changes to the product.
heat transfer solutions. In general, Gedera has manufacturing capabilities for most of the Heat Transfer Components.heat transfer solutions. Gedera manufactures the necessary tools, fixtures, test equipment and special jigs which are required to manufacture, assemble and test these products. Gedera developed proprietary design and analysis techniques which assist in the mechanical and thermal design of its products. All of Gedera’s products are inspected and tested by trained inspectors using highly sophisticated test equipment in accordance with its customer requirements.
Limco’s engineering department enhances its ability to provide its customers with high-end top qualitytop-quality MRO services, supports the development of MRO services for new products with commercial potential and supports its OEM activity. Limco’s engineering department employs several certified mechanical and aerospace engineers. Limco’s multi-disciplinary team of engineers specializes in, among others, in heat transfer solutions and components and supports all processes of thermal and structural analysis, mechanical and metallurgical research and development for manufacturing design. Limco’s engineers have direct experience with aerospace component repair and with obtaining supplemental type certificates from the FAA. Limco’s engineering department supports the development of new repairs capabilities with repairs that extend beyond the limits of the component maintenance manual and utilizes Designated Engineering Representatives (DER)DER to obtain the necessary FAA approvals.
Piedmont’s engineering department employs experienced mechanical and aerospace engineers with repair station and manufacturing experience in both engineering and quality. Piedmont also has an FAA certified Designated Engineering Representative (DER)FAA-certified DER on staff with delegations in PowerplantPower plant (APUs) & Mechanical Systems and with special delegation to manage and approve Repair Specifications. Besidesrepair specifications. In addition to developing quality major repairs, Piedmont’s engineers have experience in obtaining Supplemental Type Certificatessupplemental type certificates and Parts Manufacturer Approvalsparts manufacturer approvals while working directly with the FAA Aircraft Certification Office. The Piedmont engineering team is dedicated to providing its worldwide customers with safe, reliable and economical solutions in the repair of APU, landing gear, line replaceable units and associated equipment.
Turbochrome’s engineering department enhances its ability to provide its customers with high-end top qualitytop-quality MRO services. Turbochrome’s engineering department employs several certified mechanical and metallurgical engineers. Turbochrome’s multi-disciplinary team of engineers specializes in, among other things, in heat transferturbine components and supports all processes of thermal and structural analysis and mechanical and metallurgical research and development. Turbochrome’s engineers have substantial experience with aerospace component repair and with obtaining DER and DOA certificates from the FAA and EASA.
Research and Development
The technological developments in theTAT’s markets in which TAT operates, increasedrive the need to constantly examine the use of new materials and technologytechnologies in an effort to improve both the physical characteristics of the products (size, weight), as well as their performance (optimal heat transfer, higher reliability and increased lifespan). TAT also develops new products and enhanced functionalities tofor its existing products based on customer demands and byin response to the competitive environment and market potential. TAT invests resources to attain such technological and product improvements in cooperation with its customers.
Source and Availability of Raw Materials and Spare Parts
TAT and its subsidiaries acquire most of the components for the manufacture of their products and provision of their services from a limited number of suppliers and subcontractors, most of whom arethe majority located in Israel and the United States. CertainSome of these suppliers are currently the sole source of one or more components upon which TAT and its subsidiaries are dependent. Since many of TAT's and its subsidiaries’ purchases require long lead-times,lead times, a delay in the supply of an item can significantly delay the delivery of a product. Generally, TAT and its subsidiaries have not experienced significant difficulty in obtaining timely deliveries of necessary components. The raw materials used in manufacturing programs are generally readily available metals and alloys. TAT and its subsidiaries have not had any difficulty in obtaining such materials in the past andcomponents; however, if they are unable to obtain these components when needed, they would experience delays in manufacturing their products and their financial results could be adversely affected.
The raw materials used in manufacturing programs are generally readily available metals and alloys. TAT and its subsidiaries have not had any significant difficulty in obtaining such materials in the past.
TAT and its subsidiaries select their suppliers primarily based on their ability to ensure that their parts are serviceable and traceable to OEM-approved sources, their delivery performance and their ability to help reduce theirthe total cost of procuring those parts. For quality control, cost and efficiency reasons, TAT and its subsidiaries generally purchase supplies only from vendors with whomwho they have ongoing relationships or who their customers have previously approved.
Authorizations from OEMs often require that TAT purchase component parts that are needed for its MRO services from the OEM or its designated distributors.
Israeli Export Policy
Exports of military related products are subject to the military export policy of the State of Israel. CurrentCurrently the Israeli Government policygovernment encourages exports to approved customers, provided that such exports do not run counter to Israeli policy or national security considerations. Gedera must obtain a permit prior to initiateinitiating a sales proposal and ultimately an export license for the transaction is required. GederaIsraeli law also regulates the export of “dual use” items (items that are typically sold for civilian uses or purposes but that may also have military purposes).
53
While we have been successful in obtaining export permits in the past, we may not be able to obtain the necessary export permits or licenses in the future. In addition, governmental policy with respect to military exports (or dual use items) may be altered. However, to date Gedera has not encountered any significant difficulties in obtaining necessary permits or licenses for sale of its products.
U.S. Export Regulations.Regulations
Proprietary Rights
At the present time, TAT and its subsidiaries do not own any patents. TAT and its subsidiaries rely on laws protecting trade secrets, and consider such items proprietary, but TAT believesproprietary; however, we believe that itsour success depends less on the ownership of such proprietary rights than on theirour innovative skills, technical competences, marketing and engineering abilities. TAT and its subsidiaries have no material registered trademarks.
B. Government Regulations
Aerospace and Safety Regulations
The commercial aerospace industry is highly regulated by the FAA in the United States, EASA in Europe, the Civil Aviation Authority in England and other governmental authorities elsewhere in the world, while the military aerospace industry is governed by military quality specifications established by the U.S. Department of Defense for the manufacturing and repair industries and ISO-9000. TAT is required to be certified by one or more of these entities and, in some cases, by individual OEMs. TAT must also satisfy the requirements of its customers, including OEMs and airlines that are subject to FAA regulations and to evolving industry standards, and provide these customers with products that comply with the government regulations applicable to commercial flight operations. TAT believes it currently satisfies or exceeds these FAA maintenance standards in its repair and overhaul activities. Each of itsOur active or operating repair stations isin Israel and the United States are approved by the FAA.FAA (while TAT-Engineering, our joint venture in Russia, is currently pursuing such certification or is currently in process of pursuing such certification). TAT also believes it currently satisfies all industry standards in its facilities.
TAT’s operations are also subject to a variety of worker and community safety laws including the Occupational Safety and Health Act of 1970, known as OSHA, which mandates general requirements for safe workplaces for all USU.S. employees. In addition, OSHA provides special procedures and measures for the handling of certain hazardous and toxic substances. TAT believes that its operations are in material compliance with OSHA’s health and safety requirements.
TAT believes that it is in material compliance with US,U.S., European and other governmental regulations affecting the aerospace and defense industry.industries.
Israeli Regulations
TAT’s operations in Israel are subject to supervision by the Israeli Ministry of Defense and Civil Aviation Administration.Administration of Israel. Gedera is certified by the Israeli Air ForceIAF and the Israeli Ministry of Defense for both manufacturing and maintenance. Gedera is also licensed as a repair station for certain components by the Israeli Civil Aviation Administration.Administration of Israel. In addition, Gedera’s export of certain products and/or know-how is subject to approval by the Department for Control of Defense Export Controls Agency (“DECA”) of the Israeli Ministry of Defense, known as API. Permits from API must be obtained for the initiation ofDefense. DECA permits are required prior to submitting sales proposals with regard to such exports, as well as for the actual export of such products.
Environmental Matters
TAT’s operations are subject to a number of stringent federal, state and local environmental laws in the United States and Israel, andas well as to regulation set or promulgated by government agencies, including the U.S. Environmental Protection Agency. Among other matters, these regulatory authorities impose requirements that regulate the emission, discharge, generation, management, transportation and disposal of pollutants and hazardous substances. These authorities may require TAT to initiate actions to remediate the effects of hazardous substances which may be or have been released into the environment and require TAT to obtain and maintain permits in connection with TAT’s operations. This extensive regulatory framework imposes significant compliance burdens and risks.
Recently, the Israeli Water Authority requested that TAT perform sampling of certain groundwater wells in TAT’s facility in Gedera.
Although TAT seeks to maintain its operations and facilities in compliance with applicable environmental laws, there can be no assurance that TAT has no violations, or that change in such laws, regulations or interpretations of such laws, will not require TAT to make significant additional expenditures to ensure compliance in the future. Currently, TAT does not believe that it will have to make material capital expenditures for its operations to comply with environmental laws or regulations, or to incur material costs for environmental remediation during the 2016 fiscal year.
C. Property, Plants and Equipment
The Gedera facility is located in Park Re’em near Gedera. The Park Re’em locationThis facility is approximately 348,000 square feet and houses TAT’s executive offices, Gedera’s research and development and manufacturing operations and includes approximately 344,000 square feet facility.operations. The land of this facility is leased by TAT Industries Ltd. from the Israel Land Authority or ILA pursuant to a lease that expires in 2016 with respect to one plot (237,000 square feet) and 2020 with respect the other plot (107,000 square feet)(“ILA”). The term of the leases may be extended for a subsequent period of up to 49 years, subject to payment to be calculated according to the ILA's rules. Approximately 43,00026,000 square feet of the facility are sub-leased to TAT from 1991 until 2020 for rental fees.2020. TAT sub-leases the remaining 301,000322,000 square feet of the facility from TAT Industries pursuant to an agreement TAT entered into in connection with the purchase of the operations relating to the manufacture of aviation accessories of TAT Industries in February 2000. The originally lease agreement expires in November 2024. On January 2022, TAT signed a lease termination agreement with the landlord (TAT Industries) pursuant to which the parties agreed that TAT will vacate the facility in Gedera on March 31, 2022. This decision is part of the company's restructuring plan, see note 9 to the company financial statements.
56
In 20152019, the rental fee was reviewed by a real estate appraiser and as a result waswho determined that the rental fee willwould be $656,000 per year with an additional incremental payment of 2%$1.2 million per year. Total rental payments TAT paid to TAT Industries during 2015, 20142021, 2020 and 20132019 were $667,000, $427,000$1,200, $1,200 and $424,000,$787 thousand, respectively.
Due to the adverse impact of COVID-19 on the aerospace industry and consequently on TAT’s business, TAT has resolved to take additional actions in fiscal year 2021 to change its cost structure and reduce costs in order to cope effectively with the impact of COVID-19 on its business. Specifically, we executing the Company's plan during 2021 which including transferring our activity from our leased facility in Gedera to a facility in Tulsa, Oklahoma (see information regarding such facility in the immediately following three paragraphs) and to a facility in Kiryat Gat, Israel which is leased by our wholly owned subsidiary Turbochrome. The facility in Kiryat Gat is approximately 135,000 square feet, and the land on which the facility is located is leased from the ILA. The leasehold rights are for a period ending in 2045 and are recorded in Turbochrome's name. Turbochrome paid the entire lease payments due until 2045 in a one-time payment (discounted to present value).
Limco owns and operates a 55,000 square feet manufacturing plant in Tulsa, Oklahoma which has historically supported all its business, including its aftermarket heat transfer component repair station. This facility also has housed Limco’s administration, engineering, quality control and support services.
Limco also leases building #2, building #3, building #4, and building #5. Building #2 lease is effective from June 1, 2017 to July 31, 2022. The lessee or lessor may terminate the lease by giving lessee or lessor six months advance written notice. The rent for building #2 is $4,000 per month plus the annual percentage increase in the CPI-W. Building #3 lease expired on January 31, 2014, however, the lease has renewed automatically from year to year since that date. Either party has the right to cancel the lease with 30 days’ advance notice prior to the annual expiration of the term. The rent for building #3 is $1,505 per month plus the annual percentage increase in the CPI-W. Building #4 lease is effective from April 1, 2017 to March 31, 2029. The early termination option on Building #4 states that at any time after March 31, 2019, the lessee or lessor may terminate the lease by giving the lessee or lessor 6 months advance written notice. The rent is $2,800 per month for building #4 plus the annual percentage increase in the CPI-W. The lease on building #5 expires on March 31, 2030. Building #5 has an additional 16,000 square feet repair station adjacent to its Tulsa manufacturing plant which has supported its heat transfer componentearly termination option effective after March 31, 2019 with six months advance written notice. The rent is $4,100 per month for building #5 plus the annual percentage increase in the CPI-W.
57
In 2021, 2020 and pneumatic ducting MRO services. In 2015, 2014 and 2013,2019, the rental expense for this property was $50,700, $51,600$158, $149 and $50,000,$144 thousand, respectively, for each one of these years.
In the second half of 2015, Piedmont leased approximately 82,000 square feet in Greensboro, North Carolina, for its new landing gear component and overhaul repair station as well as the MPG operation. The lease expires in October 31, 2016.
on June 30, 2025. In 2021, 2020 and 2019 the rental expense was $357 thousand, respectively, for each one of these years. In addition, Piedmont leases approximately 56,000 square feet space for its facility in Kernersville, North Carolina to support its aftermarket APU component and overhaul repair station. During 2018, Piedmont vacated the first floor of the facility while continuing to lease the second-floor space, approximately 28,000 square feet. In 2015, 20142021, 2020 and 2013,2019, the rental expense for this property was $78,000$48 thousand for each one of these years.year respectively. The lease expires inexpired on October 31, 2016. Piedmont also leases approximately 32,000 square feet for its facility in Winston Salem, North Carolina to support its landing gear component2016 and overhaul repair station as well as the machining, plating & grinding operation. In 2015, 2014 and 2013, the rental expense for this property was $76,000 for each one of these years. The lease expires on December 31, 2017. Piedmont also leased approximately 10,000 square feet of storage space in Winston-Salem near its main facility starting in 2014 on a month to month lease. In 2015 and 2014 Piedmont’s expense for this property was $19,000 and $14,000 respectively for each one of these years. Piedmont began a new lease in April 2015 for an approximate 82,000 square feet space to be used for its landing gear component and overhaul repair station as well as the machining, plating & grinding operation beginning in the second quarter of 2016. The lease expires on June 30,is now extended until May 2025. In 2015 the rental expense for this property was $195,000.
Item 4A.Unresolved StaffStaff Comments
Not applicable.
Operating Results
The following discussion of our results of operations should be read together with our consolidated financial statements and the related notes, which appear elsewhere in this annual report. The following discussion contains forward-looking statements that reflect our current plans, estimates and beliefs and involve risks and uncertainties. Our actual results may differ materially from those discussed in the forward-looking statements. Factors that could cause or contribute to such differences include those discussed below and elsewhere in this annual report.
TAT is reliant on the robustness of the commercial and military aviationaerospace and ground defense industries. Any downturn in these industries could decreaseweaken demand for its servicessolutions and productsservices and negatively impact its financial condition.results. The commercial airline industry is cyclical and has historically been subject to fluctuations due to general economic and political conditions, such as fuel and labor costs, price competition, downturns in the global economy and national and international events.
TAT’s cost of revenues for OEM operations and MRO services consists of component and material costs, direct labor costs, quality assurance costs, shipping expenses, royalties, overhead related to manufacturing and depreciation of manufacturing equipment. TAT’s gross margin is affected by the proportion of its revenues generated from each of its operational segments.
The principal factors that affect the operating income of TAT’s four segments, in addition to their gross profit, is the amount TAT expends forexpenditure on selling and marketing expenses and general and administrative expenses. While TAT plans to tightly monitor and save onclosely monitors its operating expenses TAT believesto prevent unnecessary spending, we believe that these operating expenses may increase in the future in accordance with itsour plans to grow the business of these segments.business.
TAT’s research and development expenses are related to new products and technologies or significant improvement inof existing products and technologies.
TAT’s selling and marketing expenses are related to commission payments, compensation and related expenses of TAT’s sales teams, attendance atparticipation in trade shows, travel expenses, advertising expenses and related costs for facilities and equipment.
TAT’s general and administrative expenses are related to compensation and related expenses for executive, finance and administrative personnel, professional fees such as legal, audit, SOX, internal audit, otherinsurance premiums and general corporate expenses and related costs for facilities and equipment.
Sources of Revenues
TAT, directly and through its subsidiaries, provides a variety of servicessolutions and productsservices to the commercial and military aerospace and ground defense industries, including:
| (i) | OEM of heat transfer |
| (ii) | MRO services for heat transfer |
| (iii) | MRO services for aviation components (through our Piedmont subsidiary); and |
| (iv) | Overhaul and coating of jet engine components (through our Turbochrome subsidiary). |
59
TAT’s revenues from its four operational segments for the three years ended December 31, 20152021 were as follows:
| Year Ended December 31, | ||||||||||||||||||||||||
| 2021 | 2020 | 2019 | ||||||||||||||||||||||
| Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | |||||||||||||||||||
| Revenues | ||||||||||||||||||||||||
| OEM of heat transfer solutions and aviation components | $ | 25,977 | 33.3 | % | $ | 26,071 | 33.3 | % | $ | 26,589 | 26.1 | % | ||||||||||||
| MRO services for heat transfer components and OEM of heat transfer solutions | 18,846 | 24.2 | % | 20,835 | 26.5 | % | 34,433 | 33.7 | % | |||||||||||||||
| MRO services for aviation components | 33,232 | 42.6 | % | 31,189 | 39.7 | % | 38,687 | 37.9 | % | |||||||||||||||
| Overhaul and coating of jet engine components | 3,834 | 4.9 | % | 3,546 | 4.5 | % | 4,057 | 8.4 | % | |||||||||||||||
| Eliminations | (3,916 | ) | (5 | )% | (3,141 | ) | (4 | )% | (6,287 | ) | (6.2 | )% | ||||||||||||
| Total Revenues | $ | 77,973 | 100 | % | $ | 75,359 | 100 | % | $ | 97,479 | 100 | % | ||||||||||||
| Year Ended December 31, | ||||||||||||||||||||||||
| 2015 | 2014 | 2013 | ||||||||||||||||||||||
Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | |||||||||||||||||||
| Revenues (*) | ||||||||||||||||||||||||
| OEM of Heat Transfer Solutions and Aviation Components | $ | 27,351 | 32 | % | $ | 28,185 | 35 | % | $ | 31,138 | 39 | % | ||||||||||||
| Heat Transfer Services and Products | 31,001 | 36 | % | 30,350 | 38 | % | 29,907 | 38 | % | |||||||||||||||
| MRO services for Aviation Components | 29,665 | 35 | % | 27,734 | 34 | % | 22,429 | 28 | % | |||||||||||||||
| Overhaul and coating of jet engine components (**) | 1,905 | 2 | % | - | - | % | - | - | % | |||||||||||||||
| Eliminations | (4,315 | ) | (5 | )% | (5,543 | ) | (7 | )% | (3,923 | ) | (5 | )% | ||||||||||||
| Total revenues | $ | 85,607 | 100.0 | % | $ | 80,726 | 100.0 | % | $ | 79,551 | 100.0 | % | ||||||||||||
60
The following table reflects the geographic breakdown of TAT’s revenues for each of the three years ended December 31, 2015:2021:
| Years Ended December 31, | ||||||||||||||||||||||||
| 2021 | 2020 | 2019 | ||||||||||||||||||||||
| Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | |||||||||||||||||||
| United States | $ | 47,947 | 61.5 | % | $ | 47,095 | 62.5 | % | $ | 61,930 | 60.7 | % | ||||||||||||
| Israel | 7,745 | 9.9 | % | 6,851 | 9.1 | % | 7,088 | 6.9 | % | |||||||||||||||
| Other | 22,281 | 28.6 | % | 21,413 | 28.4 | % | 33,014 | 32.4 | % | |||||||||||||||
| Total | $ | 77,973 | 100.0 | % | $ | 75,359 | 100.0 | % | $ | 102,032 | 100.0 | % | ||||||||||||
Costs and Expenses
| Years Ended December 31, | ||||||||||||||||||||||||
| 2015 | 2014 | 2013 | ||||||||||||||||||||||
Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | Revenues in Thousands | % of Total Revenues | |||||||||||||||||||
| United states | $ | 52,751 | 62 | % | $ | 50,153 | 62 | % | $ | 45,655 | 57 | % | ||||||||||||
| Europe | 18,336 | 21 | % | 16,419 | 20 | % | 16,985 | 21 | % | |||||||||||||||
| Israel | 4,916 | 6 | % | 5,641 | 7 | % | 6,860 | 9 | % | |||||||||||||||
| Other | 9,604 | 11 | % | 8,513 | 11 | % | 10,051 | 13 | % | |||||||||||||||
| Total | $ | 85,607 | 100.0 | % | $ | 80,726 | 100.0 | % | $ | 79,551 | 100.0 | % | ||||||||||||
Cost of revenuesrevenues. TAT’s cost of revenues for OEM operations and MRO services consist of component and material costs, direct labor costs, quality-assurancequality assurance costs, royalties, shipping expenses, overhead related to manufacturing and depreciation of manufacturing equipment.
TAT’s gross margin was affected by the proportion of TAT’s revenues generated from OEM operations and MRO services in each of the reported years.
Research and development expenses, net. Research and development expenses, net are related to new products and technologies or to a significant improvement of products and technologies, net of grants and participations received.
61
Selling and marketing expenses. Selling and marketing expenses consist primarily of commission payments, compensation and related expenses of TAT’s sales teams, attendance atparticipation in trade shows, travel expenses, advertising expenses and related costs for facilities and equipment.
General and administrative expenses. General and administrative expenses consist of compensation and related expenses for executive, finance and administrative personnel, professional fees such as legal, audit, SOX, internal audit, other general corporate expenses and related costs for facilities and equipment.
Other income (expense). Other income (expense) results from capital gain on sale of property and equipment and onetime expenses, which in 2015 are mainly attributed to the Turbochrome acquisition and related expenses.
Financial income (expense), net.Financial income (expense), net consists of exchange rate and interest income (expense).or expense. Interest income (expense)or expense relates to the interest received from (paid to)or paid to banks and changes in the rate of the NIS or other currencies against the U.S. dollar.
Tax expense (income).Tax expense consists of Israeli and U.S. federal and state taxes on the income of TAT’s business and changes in deferred tax assets (liabilities).or liabilities.
Critical Accounting Policies and Estimates
TAT’s consolidated financial statements are prepared in accordance with U.S. GAAP. These accounting principles require management to make certain estimates, judgments and assumptions based upon information available at the time that they are made, historical experience and various other factors that are believed to be reasonable under the circumstances. These estimates, judgments and assumptions can affect the reported amounts of assets and liabilities as of the date of the financial statements, as well as the reported amounts of revenues and expenses during the periods presented. While all the accounting policies impact the financial statements, certain policies may be viewed to be critical. These policies are those that are both most important to the portrayal of TAT’s financial condition and results of operations and require management’s most difficult, subjective and complex judgments and estimates. Actual results could differ from those estimates.
In many cases, the accounting treatment of a particular transaction is specifically dictated by generally accepted accounting principles in the United StatesU.S. GAAP and does not require management’s judgment in its application. There are also areas in which management’s judgment in selecting among available alternatives would not produce a materially different result. Management has reviewed these critical accounting policies and related disclosures with TAT’s Audit Committee.audit committee.
62
TAT’s management believes the significant accounting policies which affect management’s more significant judgments and estimates used in the preparation of TAT’s consolidated financial statements and which are the most critical to aid in fully understanding and evaluating the reported financial results include the following:
Inventory valuation |
Income taxes
Allowance for current expected credit losses (CECL)
Inventory valuation
Inventories are stated at the lower of cost or market.and net realizable value. Cost of raw material and parts is determined using the moving average basis. Cost of work in progress and finished products is calculated based on actual costs and the capitalized production costs, mainly labor and overhead and is determined based on the average basis. TAT’s policy for valuation of inventory and commitments to purchase inventory, including the determination of obsolete or excess inventory, requires it to perform a detailed assessment of inventory at each balance sheet date which includes a review of, among other factors, an estimate of future demand for products within specific time frames, valuation of existing inventory, as well as product lifecycle and product development plans. The business environment in which TAT operates, the wide range of products that TAT offers and the relatively short sales-cyclessales cycles TAT experiences, all contribute to the exercise of judgment relating to maintaining and writing-off of inventory levels. The estimates of future demand that TAT uses in the valuation of inventory are the basis for its revenue forecast, which is also consistent with its short-term manufacturing plan. Inventory reserves are also provided to cover risks arising from slow-moving items. Inventory management remains an area of management focus as TAT balances the need to maintain strategic inventory levels to ensure competitive lead times against the risk of inventory obsolescence because ofdue to changing technology and customer requirements. TAT writes down obsolete or slow movingslow-moving inventory in an amount equal to the difference between the cost of inventory and the net realizable value based upon assumptions about future demand, market conditions and sale forecasts.
If actual market conditions are less favorable than TAT anticipates, additional inventory write-downs may be required.
Income Taxes
TAT operates within multiple tax jurisdictions and is subject to audits in these jurisdictions. These audits can involve complex issues, which may require an extended period of time to resolve. In management’s opinion, adequate provisions for income taxes have been made for all years. Although management believes that its estimates are reasonable, no assurance can be given that the final tax outcome of these issues will not be different than those that are reflected in its historical income tax provisions.
TAT uses the liability method of accounting for income taxes. Under this method, deferred tax assets and liabilities are determined based on temporary differences between the financial statement and tax bases of assets and liabilities and net operating loss and credit carry forwards using enacted tax rates in effect for the year in which the differences are expected to reverse. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. Valuation allowances are established when it is more likely than not that some portion of the deferred tax assets will not be realized. To the extent that TAT’s decisions and assumptions and historical reporting are determined not to be compliant with applicable tax laws, TAT may be subject to adjustments in its reported income for tax purposes as well as interest and penalties.
According to an acceptable interpretation that prescribes a minimum recognition threshold a tax position is required to meet before being recognized in the financial statements. The interpretation also provides guidance on de recognitionde-recognition of tax positions, classification on the balance sheet, interest and penalties, accounting in interim periods, disclosure and transition. In addition, the Interpretationinterpretation requires significant judgment inwith respect to determining what constitutes an individual tax position as well as assessing the outcome of each tax position. Changes in judgment as to recognition or measurement of tax positions can materially affect the estimate of the effective tax rate and consequently, affect our operating results.
Losses generated prior to January 1, 2018 will still be subject to the 20-year carryforward limitation. Other potential impacts due to the Act include the repeal of the domestic manufacturing deduction, modification of taxation of controlled foreign corporations, a base erosion anti-abuse tax, modification of interest expense limitation rules, modification of limitation on deductibility of excessive executive compensation, and taxation of global intangible low-taxed income.
Allowances for Doubtful AccountsCurrent Expected Credit Losses
TAT performs ongoing credit evaluations of its customers’ financial condition and requires collateral as deemed necessary. AllowancesAccounts receivable have been reduced by an allowance for doubtful accounts are maintainedcurrent expected losses. The Company maintains the allowance for estimated losses resulting from the inability of TAT’sthe Company’s customers to make required payments. In judging the adequacy of the allowance for doubtful accounts, TAT considers multiple factors including the aging of receivables, historical bad debt experience and the general economic environment. Management applies considerable judgment in assessing the realization of receivables, including assessing the probability of collection and the current credit worthiness of each customer. If the financial condition of TAT’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. On February 25, 2016, Republic Airways Holdings Inc., a customer of Piedmont, announced that it and certain of its subsidiaries have filed voluntary petitions for relief under Chapter 11 of the United States Bankruptcy Code. The Company and Piedmont are currently assessing the implications of Republic's voluntary petition for bankruptcy on the maintenance support agreement with Republic. As of the date hereof, there are outstanding receivables from Republic of several hundred thousand U.S. dollars.
Key Indicators
TAT’s management evaluates its performance by focusing on key performance indicators, which are revenues, sources of revenues, gross profit and operating income. These key performance indicators are primarily affected by the competitive landscape in which TAT operates and its ability to meet the challenges posed.
65
The following table presents, for the periods indicated, information concerning TAT’s results of operations:
| Year Ended December 31 | ||||||||||||
| 2021 | 2020 | 2019 | ||||||||||
| (in thousands) | ||||||||||||
| Revenues | ||||||||||||
| OEM of heat transfer solutions and aviation components | $ | 25,977 | $ | 26,071 | $ | 26,589 | ||||||
| MRO services for heat transfer components and OEM of heat transfer solutions | 18,846 | 20,835 | 34,433 | |||||||||
| MRO services for aviation components | 33,232 | 31,189 | 38,687 | |||||||||
| Overhaul and coating of jet engine components | 3,834 | 3,546 | 4,057 | |||||||||
| Eliminations | (3,916 | ) | (3,141 | ) | (6,287 | ) | ||||||
| Total revenues | 77,973 | 75,359 | 97,479 | |||||||||
| Cost of revenues | ||||||||||||
| OEM of heat transfer solutions and aviation components | 24,044 | 21,703 | 23,998 | |||||||||
| MRO services for heat transfer components and OEM of heat transfer solutions | 16,922 | 17,885 | 27,852 | |||||||||
| MRO services for aviation components | 26,444 | 26,961 | 33,337 | |||||||||
| Overhaul and coating of jet engine components | 2,978 | 3,312 | 3,460 | |||||||||
| Eliminations | (3,685 | ) | (2,937 | ) | (6,468 | ) | ||||||
| Total cost of revenues | 66,703 | 66,924 | 82,179 | |||||||||
| Gross profit | 11,270 | 8,435 | 15,300 | |||||||||
| Research and development costs, net | 517 | 185 | 113 | |||||||||
| Selling and marketing | 5,147 | 4,369 | 4,929 | |||||||||
| General and administrative | 8,354 | 7,612 | 7,654 | |||||||||
| Other expenses (income) | (468 | ) | 315 | - | ||||||||
| Restructuring expenses, net | 1,755 | - | - | |||||||||
| Operating income (loss) | (4,035 | ) | (4,046 | ) | 2,604 | |||||||
| Financial expense, net | (540 | ) | (770 | ) | (422 | ) | ||||||
| Income (loss) before taxes on income (tax benefit) | (4,575 | ) | (4,816 | ) | 2,182 | |||||||
| Taxes on income (tax benefit) | (662 | ) | (1,517 | ) | 589 |
| income (loss) before equity investment | (3,913 | ) | (3,299 | ) | 1,593 | |||||||
| Share in results of affiliated company and impairment of share in affiliated companies | (76 | ) | (185 | ) | (132 | ) | ||||||
| Net income (loss) from continued operation | $ | (3,989 | ) | $ | (3,484 | ) | $ | 1,461 | ||||
| Net income (loss) from discontinued operation | 427 | (1,845 | ) | (655 | ) | |||||||
| Net income (loss) | $ | (3,562 | ) | $ | (5,329 | ) | $ | 806 |
| Year Ended December 31 | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| (in thousands) | ||||||||||||
| Revenues | ||||||||||||
| OEM of Heat Transfer Solutions and Aviation Components | $ | 27,351 | $ | 28,185 | $ | 31,138 | ||||||
| Heat Transfer Services and Products | 31,001 | 30,350 | 29,907 | |||||||||
| MRO Services for Aviation Components | 29,665 | 27,734 | 22,429 | |||||||||
| Overhaul and Coating of Jet Engine Components | 1,905 | - | - | |||||||||
| Eliminations | (4,315 | ) | (5,543 | ) | (3,923 | ) | ||||||
| Total revenues | 85,607 | 80,726 | 79,551 | |||||||||
| Cost of revenues | ||||||||||||
OEM of Heat Transfer Solutions and Aviation Components | 23,887 | 23,249 | 24,141 | |||||||||
| Heat Transfer Services and Products | 22,541 | 23,101 | 22,464 | |||||||||
| MRO Services for Aviation Components | 28,474 | 23,502 | 19,224 | |||||||||
| Overhaul and Coating of Jet Engine Components | 1,485 | |||||||||||
| Eliminations | (4,445 | ) | (5,330 | ) | (4,086 | ) | ||||||
| Total cost of revenues | 71,942 | 64,522 | 61,743 | |||||||||
| Gross profit | 13,665 | 16,204 | 17,808 | |||||||||
| Research and development costs, net | 890 | 1,070 | 713 | |||||||||
| Selling and marketing | 2,903 | 3,203 | 3,150 | |||||||||
| General and administrative | 8,469 | 8,123 | 8,668 | |||||||||
| Other expenses (income) | 631 | (11 | ) | (20 | ) | |||||||
| Gain on bargain purchase | (4,833 | ) | - | - | ||||||||
| 8,060 | 12,385 | 12,511 | ||||||||||
| Operating income from continuing operations | 5,605 | 3,819 | 5,297 | |||||||||
| Financial expense, net | (349 | ) | (1,294 | ) | (50 | ) | ||||||
| Income from continuing operations before taxes on income | 5,256 | 2,525 | 5,247 | |||||||||
| Taxes on income | 644 | 1,360 | 1,041 | |||||||||
| Net income from continuing operations after taxes on income | 4,612 | 1,165 | 4,206 | |||||||||
| Share in results of affiliated company and impairment of share in affiliated company | 1,237 | 267 | 1,025 | |||||||||
| Net income from continuing operations | 5,849 | 1,432 | 5,231 | |||||||||
| Net loss from discontinued operations, net of tax | - | - | (2,429 | ) | ||||||||
| Net income attributable to TAT Technologies Ltd. shareholders | $ | 5,849 | $ | 1,432 | $ | 2,802 | ||||||
The following table pents,presents, for the periods indicated, information concerning TAT’s results of operations as a percentage of revenues:
| Year Ended December 31, | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| Revenues | ||||||||||||
| OEM of Heat Transfer Solutions and Aviation Components | 31.9 | % | 34.9 | % | 39.1 | % | ||||||
| Heat Transfer Services and Products | 36.2 | 37.6 | 37.6 | |||||||||
| MRO Services for Aviation Components | 34.7 | 34.4 | 28.2 | |||||||||
| Overhaul and Coating of Jet Engine Components | 2.2 | - | - | |||||||||
| Eliminations | (5 | ) | (6.9 | ) | (4.9 | ) | ||||||
| Total revenues | 100 | 100 | 100 | |||||||||
| Cost of revenues | ||||||||||||
| OEM of Heat Transfer Solutions and Aviation Components | 27.9 | 28.8 | 30.3 | |||||||||
| Heat Transfer Services and Products | 26.3 | 28.6 | 28.2 | |||||||||
| MRO Services for Aviation Components | 33.3 | 29.1 | 24.2 | |||||||||
| Overhaul and Coating of Jet Engine Components | 1.7 | - | - | |||||||||
| Eliminations | (5.1 | ) | (6.6 | ) | (5.1 | ) | ||||||
| Cost of revenues | 84 | 79.9 | 77.6 | |||||||||
| Gross profit | 15.9 | 20.1 | 22.4 | |||||||||
| Research and development costs, net | 1 | 1.3 | 0.9 | |||||||||
| Selling and marketing | 3.4 | 4.0 | 4.0 | |||||||||
| General and administrative | 9.9 | 10.1 | 10.9 | |||||||||
| Other income | 0.7 | * | * | |||||||||
| Gain on bargain purchase | (5.6 | ) | - | - | ||||||||
| 9.4 | 15.3 | 15.7 | ||||||||||
| Operating income from continuing operations | 6.5 | 4.7 | 6.7 | |||||||||
| Financial expense, net | (0.4 | ) | (1.6 | ) | (0.1 | ) | ||||||
| Income from continuing operations before taxes on income | 6.1 | 3.1 | 6.6 | |||||||||
| Taxes on income | 0.8 | 1.6 | 1.4 | |||||||||
| Net income from continuing operations after taxes on income | 5.3 | 1.5 | 5.2 | |||||||||
| Share in results of affiliated company and impairment of share in affiliated company | 1.4 | * | 1.3 | |||||||||
| Net income from continuing operations | 6.7 | 1.8 | 6.5 | |||||||||
| Net loss from discontinued operations, net of tax | - | (3.0 | ) | |||||||||
| Net income attributable to TAT Technologies’ Shareholders | 6.7 | % | 1.8 | % | 3.5 | % | ||||||
| Year Ended December 31, | ||||||||||||
| 2021 | 2020 | 2019 | ||||||||||
| Revenues | ||||||||||||
| OEM of heat transfer solutions and aviation components | 33.3 | % | 30.6 | % | 27.5 | % | ||||||
| MRO services for heat transfer components and OEM of heat transfer solutions | 24.2 | 27.4 | 35.2 | |||||||||
| MRO services for aviation components | 42.6 | 41.4 | 39.5 | |||||||||
| Overhaul and coating of jet engine components | 4.9 | 4.7 | 4.2 | |||||||||
| Eliminations | (5 | ) | (4.1 | ) | (6.4 | ) | ||||||
| Total revenues | 100 | 100 | �� | 100 | ||||||||
| Cost of revenues | ||||||||||||
| OEM of heat transfer solutions and aviation components | 30.8 | 28.8 | 24.6 | |||||||||
| MRO services for heat transfer components and OEM of heat transfer solutions | 21.7 | 23.7 | 28.5 | |||||||||
| MRO services for aviation components | 33.9 | 35.7 | 34.2 | |||||||||
| Overhaul and coating of jet engine components | 3.8 | 4.4 | 4.2 | |||||||||
| Eliminations | (4.7 | ) | (3.8 | ) | (6.6 | ) | ||||||
| Cost of revenues | 85.5 | 88.8 | 84.9 | |||||||||
| Gross profit | 14.5 | 11.2 | 15.1 | |||||||||
| Research and development costs, net | 0.7 | 0.2 | 0.1 | |||||||||
| Selling and marketing | 6.6 | 5.9 | 5 | |||||||||
| General and administrative | 10.7 | 10.1 | 7.8 | |||||||||
| Other expenses (income) | (0.6 | ) | 0.4 | * | ||||||||
| Restructuring expenses, net | 2.2 | |||||||||||
| 19.6 | 16.6 | 12.9 | ||||||||||
| Operating income (loss) | (5.1 | ) | (5.4 | ) | 2.2 | |||||||
| Financial expense, net | 0.7 | 1 | 0.4 | |||||||||
| Income (loss) before taxes on income (tax benefit) | (5.8 | ) | (6.4 | ) | 1.8 | |||||||
| Taxes on income (tax benefit) | (0.8 | ) | (2 | ) | 0.6 | |||||||
| income (loss) before equity investment | (5 | ) | (4.4 | ) | 1.2 | |||||||
| Share in results of affiliated company and impairment of share in affiliated companies | (0.1 | ) | (0.2 | ) | (0.1 | ) | ||||||
| Net income (loss) from continued operation | (5.1 | ) | (4.6 | ) | 1.1 | |||||||
| Net income (loss) from discontinued operation | 0.5 | (2.5 | ) | (0.2 | ) | |||||||
| Net income (loss) | (4.6 | )% | (7.1 | )% | (0.4 | )% | ||||||
________________________
* Less than one percent.0.1 percent
Year ended December 31, 20152021 compared with Year ended December 31, 20142020
The COVID-19 pandemic has significantly increased global economic and demand uncertainty, and has impacted TAT’s businesses, operations and the aerospace sector as a whole. In response, TAT has taken immediate actions to conserve cash and reduce costs. The financial impact of the COVID-19 pandemic cannot be reasonably estimated at this time. TAT will continue to consider and proactively implement cost and working capital efficiencies so that TAT can respond to these uncertain market conditions.
Revenues. Total revenues were $85.6$77.9 million for the twelve months ended December 31, 2015,2021, compared to $80.7$75.4 million for the twelve months ended December 31, 2014,2020, an increase of 6%3.3%. This reflects (i) the decrease in revenues in the OEM of Heat Transfer Solutionsheat transfer solutions and Aviation Componentsaviation accessories segment; (ii) the increasedecrease in revenues in the Heat Transfer ServicesMRO services for heat transfer components and ProductsOEM of heat transfer solutions segment; (iii) the increase in revenues in the MRO Servicesservices for Aviation Componentsaviation components segment; and (iv) consolidation for the first timeincrease in revenue in the fourth quarteroverhaul and coating of 2015 of the Overhaul and Coating of Jet Engine Components segment.jet engine components segment.
Revenues from OEM of Heat Transfer Solutionsheat transfer solutions and Aviation Components. aviation components. Revenues from the OEM of Heat Transfer Solutions and Aviation Componentsthis operating segment decreased to $27.4$25.9 million for the year ended December 31, 20152021, from $28.2$26 million for the year ended December 31, 2014,2020, a decrease of 3% mainly due to decrease in sales of aviation components.0.1%.
Revenues from Heat Transfer ServicesMRO services for heat transfer components and Products.OEM of heat transfer solutions. Revenues from the Heat Transfer ServicesMRO services for heat transfer components and ProductsOEM of heat transfer solutions operating segment increaseddecreased to $31$18.8 million for the year ended December 31, 2015,2021, from $30.4$20.8 million for the year ended December 31, 2014, an increase2020, a decrease of 2.1% mainly due to an increase in demand for heat transfer products and services.
9.6%.Revenues from MRO Servicesservices for Aviation Components.aviation components. Revenues from MRO Servicesservices for Aviation Componentsaviation components operating segment increased to $29.7$33.2 million for the year ended December 31, 2015,2021, from $27.7$31.2 million for the year ended December 31, 2014,2020, an increase of 7.2%6.4%.During a periodic assessment of its long-term projects, the Company updated its estimates of profits expected to be earned from several long-term contracts. This assessment resulted in a decrease in revenues for the year ended December 31, 2015 in an amount of $2.1 mainly due to higher cost accrued and lower revenues expected of those long term projects.
Revenues from overhaul and coating of jet engine components. Revenues from Overhauloverhaul and Coatingcoating of Jet Enginejet engine components operating segment is $1.9decreased to $3.8 million for the period as of October 19, 2015 untilyear ended December 31, 2015. This is2021, from $3.5 million for the first time that the segment is being consolidated following the acquisitionyear ended December 31, 2020 an increase of Turbochrome by the Company.8.5%, mainly due to lower demand for overhaul and coating of jet engine components.
68
Cost of revenues. Cost of revenues was $71.9$66.7 million for the twelve months ended December 31, 2015,2021, compared to the $64.5$66.9 million for the twelve months ended December 31, 2014, an increase2020, a decrease of 11.5%0.3%. This is primarily attributable to the increase in the cost of revenue mainly in the MRO Services for Aviation Components segment and a consolidation for the first time in the fourth quarter of 2015 of Overhaul and Coating of Jet Engine components segment.
Cost of revenues as a percentage of revenues was 84%decreased to 85.5% for the twelve months ended December 31, 2015, compared to 79.9%2021, from 88.8% for the twelve months ended December 31, 2014. This is2020. The decrease primarily attributable an increasedue to management's cost reduction actions, U.S. Payroll Protection Program (“PPP”) loan that has been forgiven and recognized as a grant in theamount of $1.4 million, and other government grants in amount of $3.6 million recognized in cost of revenuesales (see “Liquidity and Capital Resources” below). The decrease in cost of revenues as percentage of revenues was partially offset by change of estimated useful life of leasehold improvements assets due to that company's restructuring plan with by $1.2 million to the MRO Services for Aviation Components segment.depreciation cost in 2021.
Cost of revenues for OEM of Heat Transfer Solutionsheat transfer solutions and Aviation Componentsaviation accessories. Cost of revenues for the OEM of Heat Transfer Solutions and Aviation Componentsthis operating segment increased to $23.9was $24 million for the year ended December 31, 2015, from $23.22021, compared to $21.7 million for the year ended December 31, 2014,2020, an increase of 2.7%10.6%.
Cost of revenues as a percentage of revenues in this segment decreased to 92.3% in the year ended December 31, 2021, from 93.8% for the year ended December 31, 2020. The increasedecrease is primarily attributabledue to product mix, increasemanagement cost reduction measures. The decrease was partially offset by change in direct labor costs, quality-assurance costsestimate useful life of leasehold improvement assets due to the company's restructuring plan by $1.2 million depreciation cost.
Cost of revenues for MRO services for heat transfer components and overhead relatedOEM of heat transfer solutions. Cost of revenues for the MRO services for heat transfer components and OEM of heat transfer solutions operating segment decreased to manufacturing during 2015.$16.9 million for the year ended December 31, 2021 from $17.9 million for the year ended December 31, 2020, a decrease of 5.6%.
69
Cost of revenues as a percentage of revenues in this segment increased to 87.3%89.9% in the year ended December 31, 2015,2021 from 82.5%86.6% for the year ended December 31, 2014.2020. The increase is primarily as a resultdue to the decrease in revenues and the transfer of product mixheat exchange cores manufacturing capabilities to Limco in accordance with lower margin sold during the year 2015 alongcompany restructuring plan. The increase was partially offset with higher rategovernment-supported employees’ retention credit grant in an amount of fixed production costs$1.2 million that have been included in 2015 compared with 2014.cost of sales.
Cost of revenues for Heat Transfer Services and ProductsMRO services for aviation components. Cost of revenues for the Heat Transfer Services and ProductsMRO services for aviation components operating segment decreased to $22.5$26.4 million for the year ended December 31, 20152021 from $23.1$26.9 million for the year ended December 31, 2014,2020, a decrease of 2.4%1.8%. The decrease is primarily attributable to lower material cost.
Cost of revenues as a percentage of revenues in this segment decreased to 72.7%79.6% in the year ended December 31, 20152021 from 76.1%86.4% for the year ended December 31, 2014,2020. The decrease is primarily as a result of reductions in material cost and nodue to the new APU engines rental business which resulted an increase in headcount.revenues and improvement in gross margin profit. In addition, government grants as PPP and ERC (employees’ retention credit) in the amount of $2.5 million that have been included in cost of sales.
Cost of revenues for MRO services for Aviation Componentsoverhaul and coating of jet engine components. Cost of revenues for MRO services for Aviation Components operatingthe overhaul and coating of jet engine components segment increaseddecreased to $28.4$3 million for the year ended December 31, 20142021 from $23.5$3.3 million for the year ended December 31, 2014, an increase of 20.9%. This increase is primarily attributed to the increase in labor and material cost compared to the rate of increase in sales during 2015.
Cost of revenues as a percentage of revenues in this segment decreased to 84.7%77.7% in the year ended December 31, 20142021 from 85.7% for93.5% in the year ended December 31, 2013,2020. The decrease is primarily as a resultdue to management actions in cost reduction, increase in revenue and government grants of product mix with higher margin products sold during year 2014.$0.58 million that have been included in cost of sales.
Research and development, net. Research and Developmentdevelopment expenses were $1.1$0.5 million for the twelve months ended December 31, 2014,2021, compared to $0.7$0.2 million for the twelve months ended December 31, 2013, an increase of 50.1%, and are related to new products and technologies within the OEM of Heat Transfer Solutions and Aviation Components and the Heat Transfer Services and Products operating segments.2020.
Research and Developmentdevelopment expenses as a percentage of revenues were 1.3%0.6% for the twelve months ended December 31, 20142021 compared to 0.9%0.2% for the twelve months ended December 31, 2013. TAT expects2020. The increase is primarily due to invest additional resourcesnew products development mainly in research and development activities, and accordingly will continue to incur and record additional research and development expenses in coming years.the heat exchanger products line.
70
Selling and marketing. Selling and marketing expenses were $3.2$5.1 million for the twelve months ended December 31, 2014,2021, compared to $3.1$4.4 million for the twelve months ended December 31, 2013, an increase of 1.7%. This was due to increased expenses in the Heat Transfer Services and Products segment, primarily attributable to an increase in commission’s costs.2020.
Selling and marketing expenses as a percentage of revenues were 4.0%6.6% for the twelve months ended December 31, 2014, similar2021, compared to 4.0%5.9% for the twelve months ended December 31, 2013. TAT expects2020. The increase is primarily due to invest additional resourcesrecruitment of new sales group representatives in selling and marketing activities in coming years.U.S.
General and administrative. General and administrative expenses were $8.1$8.3 million for the twelve months ended December 31, 2014,2021, compared to $8.7$7.6 million for the twelve months ended December 31, 2013, a decrease2020, an increase of 6.9%9.7%. The decrease in general and administrative expenses was impacted by the decrease in general and administrative expenses in the OEM of Heat Transfer Solutions and Aviation Components operating segment, primarily attributable to the decrease in bonuses.
General and administrative expenses as a percentage of revenues were 10.7% for the twelve months ended December 31, 2021, compared to 10.1% for the twelve months ended December 31, 2014, compared2020, The increase is primarily due to 10.9% forrepayment of salaries that have been reduced in 2020 as a result of cost cutting plans initiated by management in reaction to the twelve months ended December 31, 2013.Covid-19 outbreak.
Other expenses (income) as a decreasepercentage of 28.3%.revenues were (0.6%) for the twelve months ended December 31, 2021, compared to 0.4% for the twelve months ended December 31, 2020. The decrease in operating incomechange is attributablemainly derived from the sale of certain fixed assets.
Restructuring expenses. Restructuring expenses were $1.8 million for the twelve months ended December 31, 2021, compared to (i) the decrease in operating income in the OEM of Heat Transfer Solutions and Aviation Components operating segment; (ii) partially offset by the increase in operating income in the MRO Services for Aviation operating segments.
71
Restructuring expenses as a percentage of revenues were $2.5 million, compared to $0.92.2% for the twelve months ended December 31, 2013. 2021. Such expenses are due to the company’s restructuring plan that was launched in 2021 and primarily include employees’ retirement cost (one time compensation) and impairment of fixed assets and operational lease in Gedera due to the company’s restructuring plan. The restructuring cost was partially offset by reducing lease liability and right of use asset in a net amount of $1.3 million.
Financial expenses, during the twelve months ended December 31, 2014 primarily resulted from losses on Forward transactions which the company entered in order to minimize its currency risk fromnet. Financial expenses, paid in NIS, changes in exchange rates between the U.S. dollar and the Israeli Shekel, bank fees and interest payments on long-term loans.
Share in results of equity investment of affiliated companies. Share in results of equity investment of affiliated companies for the twelve months ended December 31, 2021, amounted to a loss of $ 0.1 million compared to a loss of $0.2 million for the twelve months ended December 31, 2013. Taxes on income for the twelve months2020
Year ended December 31, 2014, were impacted by tax expenses recorded in the MRO Services for Aviation operating segments.
Subject to an income of $1 millionthe immediately following sentence, please see Item 5 on Form 20-F for the twelve monthsYear ended December 31, 2013.2020 filed on March 30, 2021 for this comparison.
Conditions in Israel
TAT is incorporated under the laws of the State of Israel, and its principal executive offices and manufacturing and research and development facilities are located in the State of Israel. See “RISK FACTORS” for a description of governmental, economic, fiscal, monetary or political policespolicies or factors that have materially affected or could materially affect TAT’s operations.
Trade Relations
Israel is a member of the United Nations, the International Monetary Fund, the International Bank for Reconstruction and Development and the International Finance Corporation. Israel is a member of the World Trade Organization and is a signatory to the General Agreement on Tariffs and Trade. In addition, Israel has been granted preferences under the Generalized System of Preferences from the United States, Australia, Canada and Japan. These preferences allow Israel to export the products covered by such programs either duty-free or at reduced tariffs.
Israel and the European Union Community, known now as the “European Union,” concluded a Free Trade Agreement in July 1975 that confers some advantages with respect to Israeli exports to most European countries and obligates Israel to lower its tariffs with respect to imports from these countries over a number of years. In 1985, Israel and the United States entered into an agreement to establish a Free Trade Area. The Free Trade Area has eliminated all tariff and some non-tariff barriers on most trade between the two countries. On January 1, 1993, an agreement between Israel and the European Free Trade Association, known as the “EFTA,” established a free-trade zone between Israel and the EFTA nations. In November 1995, Israel entered into a new agreement with the European Union, which includes a redefinition of rules of origin and other improvements, such as allowing Israel to become a member of the Research and Technology programs of the European Union. In recent years, Israel has established commercial and trade relations with a number of other nations, including Russia, China, India, Turkey and other nations in Eastern Europe and the Asia-Pacific region.
Impact of Currency Fluctuation and of Inflation
TAT reports its financial results in dollars and receives payment primarily in dollars or dollar-linked NIS for all of its sales while it incurs a portion of its expenses, principally salaries and related personnel expenses in Israel, in NIS. Additionally, certain assets, as well as a portion of its liabilities, are denominated in NIS. Therefore, the dollar cost of its operations is influenced by the extent to which any inflation in Israel is offset on a lagging basis, or is not offset by the devaluation of the NIS in relation to the U.S. dollar. When the rate of inflation in Israel exceeds the rate of devaluation of the NIS against the U.S. dollar, the dollar cost of operations in Israel increases. If the dollar cost of operations in Israel increases, its dollar-measured results of operations will be adversely affected. TAT cannot assure you thatIt is uncertain whether TAT will not be materially and adversely affected in the future if inflation in Israel exceeds the devaluation of the NIS against the dollar or if the timing of the devaluation lags behind inflation in Israel.
Year ended December 31, | Israeli inflation rate% | NIS appreciation (devaluation) to the US dollar rate% | Israeli inflation adjusted for appreciation (devaluation) % | |||||||||
| 2003 | (1.9 | ) | 7.6 | 5.7 | ||||||||
| 2004 | 1.2 | 1.6 | 2.8 | |||||||||
| 2005 | 2.4 | (6.8 | ) | (4.4 | ) | |||||||
| 2006 | (0.1 | ) | 8.2 | 8.1 | ||||||||
| 2007 | 3.4 | 9.0 | 12.4 | |||||||||
| 2008 | 3.8 | 1.1 | 4.9 | |||||||||
| 2009 | 3.9 | 0.7 | 4.6 | |||||||||
| 2010 | 2.7 | 6.4 | 9.1 | |||||||||
| 2011 | 2.2 | (7.7 | ) | (5.5 | ) | |||||||
| 2012 | 1.4 | 2.3 | 3.7 | |||||||||
| 2013 | 2.0 | 7.5 | 9.5 | |||||||||
| 2014 | (0.2 | ) | 12 | 11.8 | ||||||||
| 2015 | (0.1 | ) | 0.3 | 0.2 | ||||||||
Because exchange rates between the NIS and the dollar fluctuate continuously, exchange rate fluctuations and especially larger periodic devaluations will have an impact on TAT’s profitability and period-to-period comparisons of its results. The effects of foreign currency re-measurements are reported in TAT’s consolidated financial statements in current operations. Although TAT cannot assure youhedges a portion of its exchange rate risk through the use of forward contracts and other derivative instruments, there is no certainty that in the future its results of operations may not be materially adversely affected by currency fluctuations.
Corporate Tax Rate
Israeli companies are generally subject to corporate tax on their taxable income (including capital gains). The regular corporate tax rate for Israel is 26.5%was 23% for the year ended December 31, 2014 and 2015, and 25% for the year ended2019 , December 31, 2013. In 20162020 and thereafter the regular corporate tax rate is set to be 25%.December 31, 2021.
However, the rate is effectively reduced for income derived from an approved enterpriseApproved and beneficiary enterprise. Until December 31, 2010, TAT has elected to participate in the alternative package of tax benefits for its current approved enterprise and beneficiary enterprise underBeneficiary Enterprises, as defined by the Law for the Encouragement of Capital Investments, 1959, as amended (the "Investment Law"). Until December 31, 2010, TAT elected to participate in the alternative package of tax benefits for its current Approved and Beneficiary Enterprises. Pursuant to such law, the income derived from those enterprises was exempt from Israeli corporate tax for a specified benefit period (except to the extent that dividends are distributed from tax exempt income generated from the Approved and Beneficiary Enterprises or during the tax-exemption period other than upon liquidation) and subject to reduced corporate tax rates for an additional period.
74
Certain amendments to the Investment Law became effective in January 2011 (the “2011 Amendment”). Under the 2011 Amendment, income derived by ‘Preferred Companies’ from ‘Preferred Enterprises’ (both as defined in the 2011 Amendment) would be subject to a uniform reduced corporate tax rate of corporate tax as opposed to the current incentives that are limited to income from Approved or BenefitingBeneficiary Enterprises during their benefits period. According to the 2011 Amendment, the uniform tax rate on such income, referred to as ‘Preferred Income’, would be 10% in areas in Israel that are designated as Israel’s Development Zone A and 15% elsewhere in Israel during 2011-2012, 7% and 12.5%, respectively, in 2013-2014, and 6% and 12%, respectively, thereafter. As with dividendsDividends distributed from taxable income derived from an Approved Enterprise or Benefiting Enterprise during the applicable benefits period, dividends distributed from Preferred Income would be subject to a 15% tax (or lower, if so provided under an applicable tax treaty), which would generally be withheld by the distributing company. While the Companya company may incur additional tax liability in the event of distribution of dividends from tax exempt income generated from its Approved and BenefitingBeneficiary Enterprises, no additional tax liability will be incurred by the Companycompany in the event of distribution of dividends from income taxed in accordance with the 2011 Amendment.
Under the transitional provisions of the 2011 Amendment, the CompanyTAT elected to irrevocably implement the 2011 Amendment with respect to its existing Approved and BenefitingBeneficiary Enterprises while waiving benefits provided under the legislation prior to the 2011 Amendment.
75
Certain investment income derived by TAT from investments may not be regarded by the Israeli tax authorities as income from TAT’s approved and beneficiary enterprisesPreferred Enterprise and consequently may be taxed at the regular statutory rate in Israel.
Certain of TAT’s subsidiaries operate in and are subject to the tax laws of various other jurisdictions, primarily the United States. TAT’s U.S. subsidiaries are taxed based on federal and state tax laws. The U.S. federal statutory flat tax of TAT’s U.S. subsidiaries was 38% in therate for tax years ended December 31, 2015, 20142020 and 2013, respectively.2021 is 21%,
Recently Issued Accounting Standards
In addition, this Update also simplify the accounting for income taxes in certain topics as follows: 1. Requiring that an entity recognize a franchise tax (or similar tax) that is partially based on income as an income-based tax and account for any incremental amount incurred as a non-income-based tax; 2. Requiring that an entity evaluate when a step up in the tax basis of goodwill should be considered part of the business combination in which the book goodwill was originally recognized and when it should be considered a separate transaction;3. Specifying that an entity can elect (rather than required to) allocate the consolidated amount of current and deferred tax expense to a legal entity that is not subject to tax in its separate financial statements;4. Requiring that an entity reflect the effect of an enacted change in tax laws or rates in the annual effective tax rate computation in the interim period that includes the enactment date.
The guidance also requires enhanced disclosures regardingamendments in this Update are effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. The new standard does not have a material effect on the nature, amount, timing and uncertaintyCompany's financial statements upon adoption.
Accounting pronouncements issued but not yet adopted:
1. In November 2021, the FASB issued ASU 2021-10, Government Assistance (Topic 832), which increases the transparency of revenue and cash flows arising fromgovernment assistance including disclosure of the type of assistance, an entity’s contracts with customers. The guidanceaccounting for the assistance, and the effect of the assistance on an entity’s financial statements. ASU 2021-10 is effective for the interim and annual periods beginning on or after December 15, 2017 (early adoption is permitted inall entities for financial statements issued for annual periods beginning after December 15, 2016). The guidance permits2021. An entity should apply the use ofamendments either a retrospective or cumulative effect transition method. The Company is currently evaluatingprospectively to all transactions within the impactscope of the amended guidance on its consolidatedASU that are reflected in the financial statements.statements at the date of initial application and that are entered into after that date or retrospectively to those transactions.
Liquidity and Capital Resources
As of December 31, 2015,2021, TAT had cash and cash equivalents and short-term bank deposits of $26.8$13.2 million compared with cash and cash equivalents and short-term bank deposits of $28to $24.3 million as of December 31, 2014.2020, a decrease of $11.1 million primarily due to investments in machineries, infrastructure, buildings and new manufacturing capabilities in an amount of $16 million.
During 2021, TAT received $3 million loan from commercial banks, this new loan is in addition to previous loans TAT received in 2020 in an aggregate amount of $3.3 million, such loans are guaranteed by the Israeli government. The loans bear annual interest of 3.1% (Prime Rate+1.5%) which will be paid in equal monthly instalments from June 2021 through February 2031. Repayment of principal amount of the loans will begin as of 2022.
In addition, during 2020 TAT received a loan of approximately $3.1 million under the U.S. Small Business Administration Payroll Protection Program (“PPP”) which was created under the Coronavirus Aid, Relief and Economic Security Act. Under the PPP, repayment of the loan, including interest, may be forgiven based on payroll expenses, rent, utilities and other qualifying expenses incurred during a certain period following receipt of the loan, provided that TAT will adhere to specific requirements outlined in the PPP. Based on SBA's forgiveness approval notice, amounts of $1.7 and $1.4 million have been recognized as grants in 2020 and 2021, respectively.
In March 2021 TAT received a short-term credit line of $3 million from a commercial bank in the US. This new credit line is in addition to a $3 million short term credit line received in 2020 from a banking institution in the US. The loans bear an annual interest rate of 3.6% and can be renewed by the end of the year for an additional year. The loans have financial covenants such as a) tangible net worth to funded debt ratio of not less than 3 to 1, b) positive EBITDA, and c) minimum eligible accounts receivable of $6 million for each loan. The company satisfied such covenants as of December 31, 2021 and 2020.
78
Capital expenditures for the years ended December 31, 2015, 20142021, 2020 and 20132019 were approximately $3.3$16.1 million, $3$11 million and $2.2$3.8 million, respectively. TAT funded these expenditures mainly from its own cash resources, cash flows from operations, and alsonew credit line from financing activities.banks. TAT expects that its available cash and cash equivalents and cash flow that will be generated from operations will be sufficient to enable it to fund its capital expenditures.
Cash Flows
The following table summarizes TAT’s cash flows for the periods presented:
| Year Ended December 31, | ||||||||||||
| (in thousands) | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| Net cash provided by (used in) operating activities | $ | 733 | $ | (1,458 | ) | $ | 7,203 | |||||
| Net cash provided by (used in) investing activities | (4,470 | ) | 4,624 | 70 | ||||||||
| Net cash used in financing activities | (469 | ) | (2,909 | ) | (2,936 | ) | ||||||
| Net cash provided by discontinued operations | - | - | 514 | |||||||||
| Net increase (decrease) in cash and cash equivalents | (4,206 | ) | 257 | 4,851 | ||||||||
| Cash and cash equivalents at beginning of the year | 22,894 | 22,637 | 17,786 | |||||||||
| Cash and cash equivalents at end of the year | 18,688 | 22,894 | 22,637 | |||||||||
| Less – Cash and cash equivalents of discontinued operations at end of year | - | - | 2,823 | |||||||||
| Cash and cash equivalents of continuing operations at end of year | $ | 18,688 | $ | 22,894 | $ | 19,814 | ||||||
| Year Ended December 31, | ||||||||||||
| (in thousands) | ||||||||||||
| 2021 | 2020 | 2019 | ||||||||||
| Net cash provided by (used in) operating activities | $ | (2,269 | ) | $ | 5,947 | $ | 3,551 | |||||
| Net cash used in investing activities | (15,639 | ) | (5,407 | ) | (3,279 | ) | ||||||
| Net cash provided by financing activities | 6,042 | 7,652 | - | |||||||||
| Net cash provided by (used in) discontinued activities | 777 | 153 | (263 | ) | ||||||||
| Net increase (decrease) in cash and cash equivalents | (11,089 | ) | 8,345 | 9 | ||||||||
| Cash and cash equivalents at beginning of the year | 24,304 | 15,959 | 15,950 | |||||||||
| Cash and cash equivalents at end of the year | $ | 13,215 | $ | 24,304 | $ | 15,959 | ||||||
79
Net cash provided by (used in)used in operating activities for the year ended December 31, 20152021, amounted to approximately $0.7$2.3 million, compared to $(1.4)net cash provided by operating activities of $5.9 million for the year ended December 31, 20142020 and $7.2net cash provided by operating activities of $3.5 million for the year ended December 31, 2013.2019.
Net cash used in operating activities for the year ended December 31, 2021 was impacted by the company's restructuring plan cost with a total amount of $580.
Net cash used in operating activities for the year ended December 31, 2021 was principally derived from the following adjustments of non-cash line items: an upward adjustment of $4.8 million for depreciation and amortization; a upward adjustment of $2.6 million for increase in trade accounts payable; an upward adjustment of $1.8 million for impairment of fixed assets. This was offset by $3.5 million loss; a downward adjustment of $2.9 million for increase in trade accounts receivable; a downward adjustment of $1.4 million for government loan forgiveness; a downward adjustment of $1.3 million due to change in lease right of use and lease liability; a downward adjustments of $1 million for increase in other current assets and prepaid expenses.
Net cash provided by operating activities for the year ended December 31, 20152020 was principally derived from $5.8 million of net income and from the following adjustments forof non-cash line items: an upwardsupward adjustment of $2.8$4.3 million for depreciation and amortization; an upward adjustment of $0.5$9.5 million for increase in other accounts payable and accrued expenses; and an upwards adjustment of $0.4 million for increase in trade accounts payable. This was offset with a downward adjustment of $1.2 million for share in results and sale of equity investment of affiliated company; a downward adjustment of $2.4 million for increasedecrease in trade accounts receivable; a downwardan upward adjustment of $1.6 million for decrease in inventory; an upward adjustment of $0.6 million for increase in inventory; andnon-cash finance expenses. This was offset by $5 million loss; a downward adjustment of $4.8 million for onetime gain on bargain purchase.
Net cash provided by operating activities for the year ended December 31, 20132019 was principally derived from $5.3 million of net income from continuing operations and from the following adjustments forof non-cash line items: an upwardupwards adjustment of $1.9$4.3 million for depreciation and amortization; an upwardsupward adjustment of $2.5 million for decrease in other current assets and prepaid expenses; an upward adjustment of $3.3 million for increase in trade account payable and an upward adjustment of $1 million for decreaseincrease in other accounts receivable, prepaid expenses and funds in respect of employee rights upon retirement; an upwardaccrued expenses. This was offset by a downward adjustment of $0.7$5.7 million for decreaseincrease in inventories; an upwardsinventory; a downward adjustment of $0.3$2 million for increase in trade accounts receivable; a downward adjustment of $0.9 million for decrease in liability in respect of employee rights upon retirement; an upwards adjustment of $0.3 million for increase in other accounts payable and accrued expenses and an upwards adjustment of $0.1 million for decrease in net deferred income tax asset. This was offset with a downward adjustment of $1.0 million for share in results of affiliated company; a downward adjustment of $1.2 million for increase in accounts receivable;retirement and a downward adjustment of $0.4$0.5 million for decrease in other accounts payable and accrued expenses.deferred income taxes, net.
In the year ended December 31, 2015, the2021, net cash used in financingby investing activities waswere primarily attributable to repayments of $0.5 million purchase of short-term loans.intangible assets and $16.2 million purchase of property and equipment, out of this amount $5.8 million was attributed to new investment in machineries and buildings due to the Company's restructuring plan.
In the year ended December 31, 2014, the2020, net cash used in financingby investing activities waswere primarily attributable to repayments$3.9 million purchase of $0.9property and equipment and $1.5 million purchase of long-term credit and payment of $2 million of cash dividend.intangible assets
In the year ended December 31, 2013, the2019, net cash used in financingby investing activities waswere primarily attributable to repayments$3.3 million purchase of $0.7property and equipment.
In the year ended December 31, 2021, net cash provided by financing activities were primarily attributable to a $3.0 million short term line of short-term credit received from a commercial bank and repaymentsto loans of $2.3$3 million received in connection with a loan guaranteed by Israeli government due to Covid-19 government support.
In the year ended December 31, 2020, net cash provided by financing activities were primarily attributable to a $3.0 million short term line of long-term loans.credit received from a commercial bank and to loans of $4.6 million received in connection with the PPP loan program from the US SBA and in connection with a loan guaranteed by Israeli government due to Covid-19 government support.
A. Research and Development, Patents and Licenses
Not applicable.
In recent years, trends in the aerospace industry in which we operate havehas been impacted by the increase in number of commercial and defense aircraft, increase in number ofcommercial passenger traffic and a corresponding increase in airlines’ revenue. ThereThe Covid-19 pandemic did, however, result in a slow-down in commercial aviation markets and there is no assurance that such increase in the number of aircraft, passenger traffic and airlines revenuethese trends will continue in the future. AirplaneCommercial carriers continue withremain committed to their efforts to reduce cost of MRO activities and increase efficiencies.
We are not a party to any material off-balance sheet arrangements. In addition, we have no unconsolidated special purpose financing or partnership entities that are likely to create material contingent obligations.
The following table summarizes our minimum contractual obligations and commercial commitments as of December 31, 20152021, and the effect we expect them to have on our liquidity and cash flow in future periods (not include future liabilities from held for sale operating segment).
| Contractual Obligations | Payments due by Period (Amounts in Thousands US$) | |||||||||||||||||||
| Total | Less than 1 year | 1-3 Years | 3-5 Years | More than 5 years | ||||||||||||||||
| Operating lease obligations | 3,158 | 1,168 | 1,470 | 324 | 196 | |||||||||||||||
| Purchase commitments | 17,108 | 12,038 | 4,312 | 240 | 518 | |||||||||||||||
| Total | $ | 20,266 | $ | 13,206 | $ | 5,782 | $ | 564 | $ | 714 | ||||||||||
| Contractual Obligations | Payments due by Period | |||||||||||||||||||
| Total | Less than 1 year | 1-3 Years | 3-5 Years | More than 5 years | ||||||||||||||||
| Operating lease obligations | 8,491,000 | 1,492,000 | 2,367,000 | 2,105,000 | 2,527,000 | |||||||||||||||
| Purchase commitments | 3,667,000 | 3,667,000 | - | - | - | |||||||||||||||
| Total | $ | 12,158,000 | $ | 5,159,000 | $ | 2,367,000 | $ | 2,105,000 | $ | 2,527,000 | ||||||||||
82
In addition, we have long-term liabilities for severance pay that are calculated pursuant to Israeli severance pay law generally based on the most recent salary of the employees multiplied by the number of years of employment, as of the balance sheet date. Employees are entitled to one month’s salary for each year of employment or a portion thereof. As of December 31, 2015,2021, our severance pay liability, net was $245,000.$ 347 thousand.
83
Item 6.Directors, Senior Management and Employees
Set forth below are the name, age, principal position and a biographical description of each of our directors and executive officers, as of the date hereof:
| Name | Age | Position | |||
| Chairman of the Board of Directors | |||||
| 56 | Chief Executive Officer | and President | |||
| Chief Financial Officer | |||||
| EVP Engineering and Technologies | |||||
| 51 | General Manager of Gedera | ||||
| Dave Thomas | 58 | General Manager of Piedmont | |||
| Greg Watson | 52 | General Manager of Limco | |||
| Ron Ben-Haim | Director | ||||
| Amiram Boehm | 50 | Director | |||
| Moti Glick (1)(2)(3)(4) | 69 | External Director | |||
| Ronnie Meninger (1)(3)(4) | 65 | Independent Director | |||
| Aviram Halevi (1)(2)(3)(4) | External Director |
(1) “Independent“Independent Director” under the applicable SEC and NASDAQ Marketplace Rules and the applicable rules of the U.S. Securities and Exchange Commission.
(2) “External“External Director” as required by Israel’sthe Israeli Companies Law
(3) Member of Audit Committee.the audit committee
(4) Member of the compensation committee that examines TAT's financial statements prior to the Board of Directors' approval.
Management
Mr. Samuel VlodingerIgal Zamir was elected by our Board of Directors as the Chairman of the Board of Directors in August 2013. Mr. Vlodinger has been a senior partner in FIMI since 2009. Prior to joining FIMI, Mr. Vlodinger held senior management positions in several industrial companies and has been an active private equity investor. Mr. Vlodinger holds a B.Sc. in industrial engineering from the Technion, Institute of Technology. Mr. Vlodinger currently serves as the chairman of the board of directors of Raval ACS, Ltd. and Ginegar Plastic Industries, Ltd.
Mr. Eyal Lieptez-EliassiEhud Ben-Yair was appointed as TAT's Chief Financial Officer in May 2018. Prior to joining TAT, Mr. Ben- Yair served as the Chief Financial Officer of SHL Telemedicine, a public company traded on the Swiss stock exchange (SIX- SHLTN) engaging in the field of digital health. Between 2012-2016, Mr. Ben Yair has served as TAT's VP Marketing since 2015.the Chief Financial Officer of Opgal Optronics, a subsidiary of Elbit Systems (NASDAQ – ESLT), a company developing and manufacturing thermal imaging cameras for military and civilian aerospace markets. Prior to that, Mr. EliassiBen- Yair has served for 8 years as Israel Countrythe Chief Financial Officer of Orad Hi-Tech Systems, a public company traded on the AIM and German stock exchange (OHT), a company developing, manufacturing and selling proprietary hardware to TV stations and broadcasters. Mr. Ben Yair is a Certified Public Accountant and holds a B.A. in Economics and Accounting from the Ben-Gurion University in Israel.
Mr. Eitan Shabtay was appointed as TAT’s EVP Engineering and Technologies in September 2019. Mr. Shabtay began his professional career in 1992 at the IDF and served for 15 years. In his final position there he acted as Deputy Head of the Mechanical Research Department, tasked with developing innovative and complex systems that are at the forefront of technology. From 2006-07 Mr. Shabtay served as the VP R&D of Pulsar, a start-up company developing a solution for Magnetic Pulse Welding (MPW). From 2008-09 he was the VP R&D of IQwind, a start-up company in the clean-tech field, developing a unique gearbox for improving the efficiency of wind turbines.
From 2010-11 he served as VP Programs of Plasan Sasa. In his last position prior to joining TAT Technologies, Mr. Shabtay served as a senior R&D Manager & Innovation Based Growth Leader at DuPontin Elbit Systems and has led variousthe development of multidisciplinary complex airborne commercial transactionssystems as well as a variety of electro-optical products and international business development activities within the Finance, High-Tech and Aerospace sectors.systems. Mr. EliassiShabtay holds a B.Sc. in AerospaceIn Mechanical Engineering (cum laude) from the Technion – Israel Institute of Technology (1991), M.Sc. in Mechanical Engineering from Tel-Aviv University, Israel (1997) and M.A. in Business AdministrationMBA (summa cum laude) from Manchester University.Ben-Gurion University, Israel (2000).
Mr. Rick Reed hasYossi Bonfil Prior to joining Turbochrome, Mr. Bonfil served as Piedmont’s President since March 2016.site manager and VP R&D at Qlight Nanotech (acquired in 2015 by Merck KGaA), a company developing semiconductor nanocrystals for various display applications. He has more than 15 years’ experience in leading and managing technological & operational projects and research teams in both global (Intel Semiconductors) and startup companies. Mr. Bonfil holds a Ph.D in Chemistry from Tel-Aviv University.
Ms. Adi Fine was appointed as TAT’s EVP Human Resources in October 2020. Prior to joining TAT, from 2015 to 2020, Ms. Fine worked for Amdocs, a global Hi-Tech company listed in Nasdaq. First, she served as head of HR for Amdocs Optima, a global organization which is a former acquisition of Comverse, and later was promoted to serve as a global head of leadership. Prior to that, Ms. Fine served as head of Human Resources for various organizations in the Hi-Tech, Finance and insurance industries. Overall, Ms. Fine has 25 years of professional experience in the human resources and organizational development domains.
85
Mr. Reed Dave Thomas was with Triumph Actuation Systems, LLC, a subsidiaryappointed General Manager of The Triumph Group, Inc.,Piedmont in June 2019 after serving as Company President.Vice President of Operations and Supply Chain beginning August 2018. Before joining TAT, from 2017 to 2018, Mr. Reed was formerly with Piedmont Aviation, Inc. from February 1978 to June 2000, serving in senior engineering and operations management positions with both the Airline Division and the General Aviation Group, which included extensive aircraft and component MRO capabilities.
Mr. Greg Watson was appointed General Manager of Limco in September 2019. Prior to joining TAT, Greg served as a General Manager at UTC Aerospace Systems where he had full operational and fiscal responsibility for two North American Word Wide Repair MRO facilities – Miramar, Florida and Santa Isabel, Puerto Rico. While at UTC, Greg also served as site director for divisions in the US including operation manager, engineering, procurementUnited States and president assistant. Between 1998Canada. Greg has additional experience as the Director of Operations for a greenfield MRO project located in Queretaro, Mexico with Messier Services America. Greg began his career as an automotive mechanic and 2012 Dr. Raz was also involved withquickly worked his way up as a valve technician and technical representative before transitioning to various senior leadership roles within the JV of BTI and PWA in Xian China. Between 1983 and 1995 Dr. Raz held management positions with BTL in Israel. Those positions included Quality and plant Management. Dr. RazMRO environment. Mr. Watson holds a B.Sc degree in Mechanical Engineering and an M.Sc degree in Material Science from the Technion Institute of Technology and a Phd.Executive Business Administration degree from La SalleYork University in the US.– Toronto, Canada and is working towards acquiring his MBA. On February 2022 Mr. Watson has terminated from his role. The company is actively looking for a replacement.
Mr. Motty Katz has beenLars Hesbjerg was appointed as Site manager and Chief Operations and Engineering Officer at Turbochrome Ltd. since October 2015.Vice President of Sales in April 2021. Prior to his appointment,joining TAT, Mr. KatzLars served 18 years with the Donaldson Company, Inc. in various leadership roles. From 2019 he served as OperationsGlobal Business Unit Director of Aerospace, and Engineering manager since 1994 till 2015. Prior to that, between 2016-2019 as the years 1986-1994Global Sales Director of Aerospace and Defense. Between 2011- 2016 he led the Off-Road OEM sales organization as the Sales Director which included large OEMs such as Caterpillar, Bobcat. Between 2010 and 2011 he was the Director of Sales, Global On-Road OEM. Between 2006 -2011 he was the Sales Director of the Gas Turbine Group of Donaldson Company. Mr. Katz served as HeadHesbjerg holds an economics degree from Niels Brock College, a B.A. degree in International Business and an Executive Management Diploma degree from the University of Engineering Department. Prior to that Mr. Katz worked as Chemical & Metallurgical Laboratory Manager (1983-1986). Prior to that Mr. Katz served as laboratory metallurgical engineer between the years 1979-1983. Prior to Turbochrome Mr. Katz served for 2 years (1977-1979) as researcher at Ben Gurion University as well as a lecturing and Lab Instructor. During his 37 years career with Turbochrome (formerly – Chromalloy Israel) Mr. Katz was in charge of developing the most advanced Turbochrome’s repair capabilities as well as development of manufacturing lines advanced products. Mr. Katz holds a B.Sc in Materials Engineering and M.Sc in Materials Engineering from Ben-Gurion University, Israel.
Minnesota.Directors
Mr. Amos Malkawas elected as a director by Chairman ofour Board of Directors in AprilJune 2016. Since 2008, Mr. Malka has been a Founder and Chairman of Nyotron Information Security Ltd., a privately-held cyber security provider based in Israel and in Silicon Valley. Since 2016, Mr. Malka is also serving as a Founderthe founder and Chairmanchairman of Spire Security Solutions Ltd., a security, intelligence and cyber security.security provider. From 2018 Mr. Malka is the Chairman of the Board of Directors of Aitech Rugged Group Inc. From 2007 until 2015, Mr. Malka served as the Chairman of the Boardchairman and CEO of Logic Industries Ltd. From 2007 -until 2010, he also served as Chairman of the Boardchairman of Plasan Sasa LTD., an armored vehicle manufacturer. From 2005 -until 2007, he served as the Chairmanchairman of the Board of Albar. Albar, is one of thea leading companiescompany in the Israeli automobile sector. From 2002 -until 2005, heMr. Malka served as the CEO of Elul Technologies Ltd., Israel's largest aerospace and defense business development and consulting company.company.Mr. Malka also serves on the boards of directors of Imagesat International and Delek Automotive System. Mr. Malka Retiredretired from the IDF in 2002 at the rank of Major General, after 31 years of military career.service. He served as commander of the IDF Ground Forces Command, and later as Head of the Israeli Defense Intelligence, a post he held until his retirement in 2002. Mr. Malka holds B.A. in historyHistory from Tel Aviv University, (1987),Israel. He also graduated from the IDF Staff & Command College (1979-80) and its National Defense Academy (1986-87).Academy.
Mr. Ron Ben-Haim was elected as a director by ourjoined TAT’s Board of Directors in August 2013. Mr. Ben-Haim has beenis a partner inat FIMI Opportunity Fund since 2006. Mr. Ben Haim was previously with Compass Advisers, LLP, an investment banking firm basedwith offices in New York and in Tel Aviv and with the Merrill Lynch Mergers & Acquisitions group in New York. Prior to Merrill Lynch, Mr. Ben-Haim worked at Teva PharmaceuticalsPharmaceutical Industries in production management. Mr. Ben-Haim holds a B.Sc. in industrial engineeringIndustrial Engineering from the Tel Aviv University and an MBA from New York University. In his capacity at FIMI, Mr. Ben-Haim currently serves on the board of directors of Tadir-Gan Precision Products, Ltd., Nirlat Paints,Orbit Technologies, Ltd., Alony, Ltd., Hadera Paper Ltd.Aitech Rugged Group, Inc., Magal Security Systems, Ltd., Polyram Plastic Industries, Ltd., Rivulis Irrigation,Inrom Industries, Ltd., OxygenG1 Security Solutions, Ltd. And Simplivia Ltd.
87
Mr. Amiram Boehm joined TAT's Board of Directors in June 2016. Mr. Boem is a partner at FIMI Opportunity Fund since 2006. Prior to joining FIMI, from 1999 until 2004, Mr. Boehm served as Head of Research at Discount Capital Markets, the investment arm of Israel Discount Bank. In his capacity at FIMI, Mr. Boehm currently also serves as the Managing Partner and Argon Works,Chief Executive Officer of FITE GP (2004) as well as a director of Ham-Let (Israel-Canada) Ltd., Hadera Paper Ltd., Rekah Pharmaceuticals Ltd., Pharm-up Ltd., Galam Ltd., Delekson Ltd. and Overseas Commerce,DIMAR Ltd. Mr. Boehm previously served as a director of Magal S3 Security Systems Ltd., Scope Metal Trading, Ltd., Inter Industries, Ltd., Global Wire Ltd. , Telkoor Telecom Ltd. and Solbar Industries Ltd. Mr. Boehm holds a B.A. in Economics and LL.B. from Tel Aviv University and a Joint MBA from Northwestern University and Tel Aviv University.
Mr. Aviram Haleviwas electedMoti Glick joined TAT’s Board of Directors as an external director (within in November 2021. From 1991 until 2021 Mr. Glick served as the meaningCEO of Overseas Commerce,a public company traded on the Israeli Companies Law) by ourTel Aviv Stock Exchange. Prior to that Mr. Glick was Vice President of Clal Trading ,a public company as well. Mr.Glick is a CPA(ISR) and holds a B.A. Economics from Bar-Elan University.
Ms. Ronnie Meningerjoined TAT's Board of Directors as an independent director in November 2021. Ms. Meninger bring vast experience in industrial companies, having served as CEO of Chemada fine chemicals Ltd. And Algatechnologies Ltd. Among other managerial positions in various companies. She also serves on the boards of Kafrit, Albaad and Maytronics. . For the last 6 years she acts as a business consultant for companies and startups. Mrs. Meninger holds a BSc in Life Sciences and an MBA from the Hebrew University of Jerusalem.
88
Mr. Aviram Halevi joined TAT’s Board of Directors as an external director in November 2013. In June 2016, Mr. Halevi has been since 2011was re-elected to serve as an external director for another three-year term. Mr. Halevi is the ownerfounder and CEO of Intel System Ltd., a provider of business intelligence services. Prior to that, from 2007 throughuntil 2010, Mr. Halevi served as the CEO of Terrogence Ltd., a producer of intelligence data for commercial markets. Mr. Halevi holds a B.Sc. in geologyGeology from Queens College, (of City University of New York) the University of TorontoCUNY, and an MBA from Tel Aviv University.
Compensation
The following table sets forth all compensation TAT paid with respect to all of its directors and executive officers as a group for the year ended December 31, 2015.2021.
| Salaries, fees, Commissions and bonuses (Amounts in Thousands US$) | Other benefits (Amounts in Thousands US$) | |||||||
| All directors and executive officers as a group (15 executives) | $ | 2,656 | $ | 180 | ||||
Salaries, fees, Commissions and bonuses | Other benefits | |||||||
| All directors and executive officers as a group (11 persons) | $ | 1,460,000 | $ | 110,000 | ||||
During the year ended December 31, 2015,2021, TAT paid its directors (except for its active chairman of the Board of Directors, Mr. Amos Malka), the fixed medium amounts permitted by law to an external director (within the meaning of the Israeli companiesCompanies Law) which was a per meeting attendance fee of NIS 2,5952,585 (approximately $665)$800), plus an annual fee of NIS 69,68069,400 (approximately $17,858)$21,486). Pursuant to its agreement with Mr. Amos Malka, TAT's active chairman of the Board of Directors, TAT paid Mr. Malka a monthly fee of NIS 50,000 plus VAT. Mr. Malka had been previously granted options to purchase 50,000 ordinary shares of TAT and is not currently entitled to receive any bonus.
89
The table below sets forth the compensation paid to our five most highly compensated senior office holders (as defined in the Israeli Companies Law) during or with respect to the year ended December 31, 2015,2021, in the disclosure format of Regulation 21 of the Israeli Securities Regulations (Periodic and Immediate Reports), 1970. We refer to the five individuals for whom disclosure is provided herein as our “Covered Executives.”
For purposes of the table and the summary below, and in accordance with the above mentionedabove-mentioned securities regulations, “compensation” includes base salary, bonuses, equity-based compensation, retirement or termination payments, benefits and perquisites such as car, phone and social benefits and any undertaking to provide such compensation.
Information Regarding Covered Executives (1) (Amounts in Thousands US$) | ||||||||||||||||||||
Name and Principal Position(2) | Base Salary | Benefits and Perquisites(3) | Variable Compensation(4) | Equity-Based Compensation(5) | Total | |||||||||||||||
| Igal Zamir, CEO and President | 357 | 89 | 27 | 38 | 511 | |||||||||||||||
| Ehud Ben- Yair, CFO | 230 | 61 | 31 | 26 | 348 | |||||||||||||||
| Dave Thomas, President of Piedmont | 204 | 28 | 26 | 32 | 290 | |||||||||||||||
| Adi Fine, EVP HR | 167 | 56 | - | 36 | 259 | |||||||||||||||
| Eitan Shabtay, EVP Engineering and Technologies | 167 | 56 | 19 | 15 | 257 | |||||||||||||||
Information Regarding the Covered Executive(1) | ||||||||||||||||||||
Name and Principal Position(2) | Base Salary | Benefits and Perquisites(3) | Variable Compensation(4) | Equity-Based Compensation(5) | Total | |||||||||||||||
| Itsik Maaravi, CEO (7) | $ | 302,665 | $ | - | $ | - | $ | 8,431 | $ | 311,096 | ||||||||||
| Tiko Gadot, CFO (6) | $ | 199,100 | $ | 20,899 | $ | - | $ | - | $ | 219,999 | ||||||||||
| Tamir Ziv, COO | $ | 163,271 | $ | 22,282 | $ | - | $ | 6,995 | $ | 192,548 | ||||||||||
| Yair Raz, CEO of Limco | $ | 163,573 | $ | 18,780 | $ | 5,481 | $ | 9,664 | $ | 197,498 | ||||||||||
Todd Schwartz, CEO of Piedmont (6) | $ | 170,231 | $ | 17,987 | $ | - | $ | 3,500 | $ | 191,718 | ||||||||||
| (1) | All amounts reported in the table are in terms of cost to |
| (2) | |
| (3) | Amounts reported in this column include benefits and perquisites, including those mandated by applicable law. Such benefits and perquisites may include, to the extent applicable to each executive, payments, contributions and/or allocations for savings funds, pension, severance, vacation, car or car allowance, medical |
| (4) | Amounts reported in this column refer to variable compensation |
| (5) | Amounts reported in this column represent the expense recorded in our financial statements for the year ended December 31, |
Introduction
According to the Israeli Companies Law and our articles of association, the management of our business is vested in our board of directors. The board of directors may exercise all powers and may take all actions that are not specifically granted to another organ in the Company (including our shareholders). Our executive officers are responsible for our day-to-day management. Our executive officers have individual responsibilities established by our chief executive officer and board of directors.
Election of Directors
Our articles of association provide for a board of directors consisting of such number of directors as may be determined from time to time at a general meeting of shareholders, provided that it shall be no less than two or more than eleven. Our board of directors is currently composed of six directors, including three independent directors, two of whom also qualify as external directors within the meaning of the Israeli Companies Law.
Pursuant to our articles of association and in accordance with the Israeli Companies Law, our directors (except for the external directors) are elected at our annual general meeting of shareholders by a vote of the holders of a majority of the voting power represented and voting at such meeting; in addition, directors (except for external directors) may be appointed by a vote of a majority of directors then in office. All our directors (except for external directors) hold office until the annual general meeting of shareholders succeeding their election (provided that if no directors are elected at the annual general meeting, the directors in office at the time such meeting was convened shall continue to hold their office) or until their earlier death, resignation, removal or other circumstances as set forth in the Israeli law. All the members of our Boardboard of Directorsdirectors (except for external directors) may be reelectedre-elected upon completion of their term of office.
91
The Israeli Companies Law requires the board of directors of a public company to determine a minimum number of directors with ‘‘accounting and financial expertise’’. Our board of directors determined, accordingly, that at least two directors must have ‘‘accounting and financial expertise’’ as such term is defined by regulations promulgated under the Israeli Companies Law.
We are exempt from the requirements of the NASDAQ Marketplace Rules with regard to the nomination process of directors since we are a controlled company within the meaning of NASDAQ Marketplace Rule 5615(c)(2). See below in this Item 6. “Directors, Senior Management and Employees - Board Practices - NASDAQ Exemptions for a Controlled Company.”
External and Independent Directors
External Directors. Under the Israeli Companies Law, Israeli companies whose shares have been offered to the public or whose shares are listed in an authorized stock exchange (accordingly, such shares are considered as held by "the public") are required to appoint at least two external directors who meet the independence criteria set by the Israeli Companies Law.
A person is qualified to serve as an external director only if he or she has “accounting and financial expertise” or “professional qualifications,” as such terms are defined by the Israeli Companies Regulations (Conditions and Criteria for a Director Who Possesses Accounting Expertise and a Director Who Possesses Professional Competence), 2005. At least one of the external directors must have “accounting and financial expertise.” Each of our external directors has “accounting and financial expertise.”
External directors are elected by a majority vote at a shareholders’ meeting. In addition to the majority vote, the shareholder approval of the election of an external director must satisfy either of two additional tests:
The majority includes at least a majority of the shares voted by shareholders other than controlling shareholders or shareholders who have a personal interest in the election of the external directors (excluding a personal interest that is not related to a relationship with the controlling shareholders); or
The total number of shares held by non-controlling shareholders and disinterested shareholders that voted against the election of the external director does not exceed 2% of the aggregate voting rights of the company.
92
In general, external directors serve for a three-year term and may be reelectedre-elected to two additional three-year terms by one of the following mechanisms: (1) the board of directors proposes the re-election of the nominee and the re-election is approved by the majority required for appointment of external directors for their initial term; or (2) a shareholder holding 1% or more of the company's voting rights proposes the re-election of the nominee, and the re-election is approved by a majority of the votes cast by the shareholders of the company, excluding the votes of controlling shareholders or those who have a personal interest in the nomination, provided that the aggregate votes cast in favor of the re-election by shareholders who are not controlling shareholders and do not have a personal interest in the nomination constitute more than 2% of the company's voting rights .rights. Israeli companies listed on certain stock exchanges outside Israel, including The NASDAQ Global Market, such as our company, may appoint an external director for additional terms of not more than three years subject to certain conditions. Such conditions include the determination by the audit committee and board of directors, that in view of the director's professional expertise and special contribution to the company's board of directors and its committees, the appointment of the external director for an additional term is in the best interest of the company.
An external director may be removed from office at the initiative of the board of directors at a special general meeting of shareholders, if the board resolves that the statutory requirements for that person’s appointment as external director no longer exist, or that the external director has violated his or her duty of loyalty to the company. The resolution of the special general meeting of shareholders regarding the termination of office of an external director requires the same majority that is required for the election of an external director. The court may order the termination of the office of an external director on the same grounds, following a motion filed by a director or a shareholder. If an external directorship becomes vacant and as a result there is lessare fewer than two directors who serve as external directors in the company, the board of directors is required under the Israeli Companies law to convene a shareholders meeting immediately to appoint a new external director.
Each committee of the board of directors that is authorized to exercise powers vested in the board of directors must include at least one external director and the audit committee must include all of the external directors. An external director is entitled to compensation as provided in regulations adopted under the Israeli Companies Law and is otherwise prohibited from receiving any other compensation, directly or indirectly, in connection with such service.
93
Until the lapse of two years from termination of office, we may not engage an external director or his spouse or child, to serve as an office holder and cannot employ or receive services from these persons, either directly or indirectly, including through a corporation controlled by that person; and with regards to a related person (to a such external director) as defined in the Israeli Companies law which is not a spouse or child – until the lapse of one year from termination of office.
Independent Directors. As a controlled company, within the meaning of NASDAQ Marketplace Rule 5615(c)(2), we are exempt from the NASDAQ Marketplace Rule which requires that a majority of our board of directors qualify as independent directors, within the meaning of the NASDAQ Marketplace Rules. See Item 6. “Directors, Senior Management and Employees - Board Practices - NASDAQ Exemptions for a Controlled Company”.
Audit Committee
Under the Israeli Companies Law, the board of directors of any public company must establish an audit committee. In general, the audit committee must consist of at least three directors and must include all of the external directors; furthermore, a majority of the audit committee members must comply with the director independence requirements prescribed by the Israeli Companies Law. The audit committee may not include (i) the chairman of the board of directors, (ii) any director employed by the Company or by a controlling shareholder of the company (including a company which is controlled by the controlling shareholder), (iii) any director providing services to the company or to a controlling shareholder of the company (including to a company which is controlled by the controlling shareholder) on an ongoing basis, or (iv) a controlling shareholder or any of the controlling shareholder’s relatives.
In addition, the NASDAQ Marketplace Rules require us to establish an audit committee comprised of at least three members, all of whom must be independent directors, each of whom is financially literate and satisfies the respective “independence” requirements of the Securities and Exchange CommissionSEC and NASDAQ and one of whom has accounting or related financial management expertise at senior levels within a company.
Our audit committee acts also as a committee for the review and the approval of our financial statements, and as such, assists our board of directors in overseeing the accounting and financial reporting processes of our company and audits of our financial statements, including the integrity of our financial statements, compliance with legal and regulatory requirements, our independent registered public accountants’ qualifications and independence, the performance of our internal audit function and independent registered public accountants, finding any defects in the business management of our company and proposing to our board of directors ways to correct such defects, approving related-party (officers, directors, controlling shareholder, etc.) transactions with the company as required by Israeli law, examining the scope of work and the payment to our independent auditors and such other duties as may be directed by our board of directors. The audit committee may consult from time to time with our independent auditors and internal auditor with respect to matters involving financial reporting and internal accounting controls.
Our audit committee consists of three members of our board of directors (including two external directors and one independent director) who satisfy the respective “independence” requirements of the Securities and Exchange Commission,SEC, NASDAQ and Israeli law for audit committee members. Our board of directors has determined that each member of our audit committee qualifies as an audit committee financial expert, as defined by rules of the Securities and Exchange Commission.SEC. The audit committee meets at least once each quarter.
Compensation Committee
Under the Israeli Companies Law, the board of directors of any public company must establish a compensation committee. The compensation committee must consist of at least three directors, include all of the external directors (including one external director serving as the chair of the compensation committee), and a majority of the committee members must comply with the director independence requirements prescribed by the Israeli Companies Law. Similar to the rules that apply to the audit committee, the compensation committee may not include the chairman of the board, or any director employed by us, by a controlling shareholder or by any entity controlled by a controlling shareholder, or any director providing services to us, to a controlling shareholder or to any entity controlled by a controlling shareholder on a regular basis, or any director whose primary income is dependent on a controlling shareholder, and may not include a controlling shareholder or any of its relatives. Individuals who are not permitted to be compensation committee members may not participate in the committee’s meetings other than to present a particular issue; provided, however, that an employee that is not a controlling shareholder or relative may participate in the committee’s discussions but not in any vote, andvote; other than the company’s legal counsel and corporate secretary who may participate in the committee’s discussions and votes if requested by the committee.
95
The compensation committee’s duties include recommending to the board of directors a compensation policy for executives and monitor its implementation, approve compensation terms of executive officers, directors and employees affiliated with controlling shareholders, make recommendations to the board of directors regarding the issuance of equity incentive awards under our equity incentive plan and exempt certain compensation arrangements from the requirement to obtain shareholder approval under the Israeli Companies Law. The compensation committee meets at least twice a year, with further meetings to occur, or actions to be taken by unanimous written consent, when deemed necessary or desirable by the committee or its chairperson.
Our compensation committee consists of our two external directors and an independent director under the respective requirements of the SEC and NASDAQ and complies with the Israeli Companies Law criteria for compensation committee members.
Internal Audit
The Israeli Companies Law requires the board of directors of a public company to appoint an internal auditor following a recommendation by the audit committee. The role of the internal auditor is to examine, among other things, the company’s compliance of the Company’s conduct with applicable law and orderly business practice. The internal auditor must meet certain statutory requirements of independence. Mr. Doron Cohen has served as our internal auditor since December 24, 2008.
Directors’ Service Contracts
There are no arrangements or understandings between us and any of our subsidiaries, on the one hand, and any of our directors, on the other hand, providing for benefits upon termination of their employment or service as directors of our company or any of our subsidiaries.
Chairman of the Board
Under the Israeli Co
Approval of Related Party Transactions under Israeli Law
Fiduciary Duties of Office Holders
The Israeli Companies Law codifies the fiduciary duties that “office holders,” including directors and executive officers, owe to a company. An office holder’s fiduciary duties consist of a duty of care and a duty of loyalty. The duty of care requires an office holder to act at a level of care that a reasonable office holder in the same position would employ under the same circumstances. This includes the duty to utilize reasonable means to obtain (i) information regarding the business feasibility of a given action brought for his approval or performed by him by virtue of his position and (ii) all other information of importance pertaining to the foregoing actions. The duty of loyalty requires that an office holder acts in good faith and for the benefit of the company, including (i) avoiding any conflict of interest between the office holder’s position in the company and any other position he holds or his personal affairs, (ii) avoiding any competition with the company’s business, (iii) avoiding exploiting any business opportunity of the company in order to receive personal gain for the office holder or others, and (iv) disclosing to the company any information or documents relating to the company’s affairs that the office holder has received by virtue of his position as an office holder.
Disclosure of Personal Interests of an Office Holder; Approval of Transactions with Office Holders
The Israeli Companies Law requires that an office holder promptly, and no later than the first board meeting at which such transaction is considered, disclose any personal interest that he or she may have and all related material information known to him or her and any documents in their position, in connection with any existing or proposed transaction by us. An office holder who did not disclose his or her personal interests will be deemed as breaching his or her fiduciary duties. duties. In addition, if the transaction is an extraordinary transaction, that is, a transaction other than in the ordinary course of business or other than onin accordance with market terms, or likely to have a material impact on the company’s profitability, assets or liabilities, the office holder must also disclose any personal interest held by the office holder’s spouse, brother or sister,sibling, parent, grandparent, child as well as brother, sistersibling or parent of such person's spouse or the spouse of any of the above, or by any corporation in which the office holder or his relative (as defined in the Israeli Companies Law) is a 5% or greater shareholder, director or general manager or in which he or she has the right to appoint at least one director or the general manager.
97
Under the Israeli Companies Law, in general, all arrangements as to compensation of office holders who are not directors (other than the Chief Executive Officer) require the approval of the compensation committee and the board of directors, including exculpation, insurance and indemnification of, or an undertaking to, indemnify an office holder who is not a director. The compensation of office holders who are directors and compensation of the Chief Executive Officer must be approved by ourthe compensation committee, board of directors and the general meeting of our shareholders.
Some transactions, actions and arrangements involving an office holder (or a third party in which an office holder has an interest) must be approved by the board of directors or as otherwise provided for in a company’s articles of association. If the transaction is an extraordinary transaction (which is defined as a transaction not in the ordinary course of business and for a material value) such a transaction must be approved by the audit committee and by the board of directors itself, and under certain circumstances shareholders’shareholder approval may be required. A director who has a personal interest in a transaction that is considered at a meeting of the board of directors or the audit committee may not be present during the board of directors or audit committee discussions and may not vote on the transaction, unless the transaction is not an extraordinary transaction or the majority of the members of the board or the audit committee have a personal interest, as the case may be. In the event the majority of the members of the board of directors or the audit committee have a personal interest, then the approval of the general meeting of shareholders is also required.
Disclosure of Personal Interests of a Controlling Shareholder; Approval of Transactions with Controlling Shareholders
The disclosure requirements that apply to an office holder also apply to a transaction in which a controlling shareholder of the company has a personal interest. The Israeli Companies Law provides that an extraordinary transaction with a controlling shareholder or an extraordinary transaction with another person in whom the controlling shareholder has a personal interest or a transaction with a controlling shareholder or his relative regarding terms of service and employment, must be approved by the audit committee (or the compensation committee, as the case may be), the board of directors and the shareholders by a special majority, as follows. The shareholders’ approval must include the majority of shares voted at the meeting. In addition to the majority vote, the shareholder approval must satisfy either of two additional tests:
The majority includes at least a majority of the shares voted by shareholders who have no personal interest in the transaction; or
The total number of shares held by disinterested shareholders that voted against the approval of the transaction does not exceed 2% of the aggregate voting rights of our company.
98
In addition, a private placement of securities that will (i) cause a person to become a controlling shareholder or (ii) increase the relative holdings of a shareholder that holds 5% or more of the company’s outstanding share capital, or (iii) will cause any person to become, as a result of the issuance, a holder of more than 5% of the company’s outstanding share capital in a private placement in which 20% or more of the company’s outstanding share capital prior to the placement are offered, the payment for which (in whole or in part) is not in cash or not under market terms, requires approval by the board of directors and the shareholders of the company.
99
Compensation of Executive Officers and Directors
In accordance with the Israeli Companies Law, we have adopted a compensation policy for our executive officers and directors. The purpose of the policy is to describe our overall compensation strategy for our executive officers and directors and to provide guidelines for setting their compensation, as prescribed by the Israeli Companies Law. In accordance with the Israeli Companies Law, the policy must be reviewed and readopted at least once every three years.
Approval of the compensation committee, the board of directors and our shareholders, in that order, is required for the adoption of the compensation policy. The shareholders’ approval must include the majority of shares voted at the meeting. In addition to the majority vote, the shareholder approval must satisfy either of two additional tests:
The majority includes at least a majority of the shares voted by shareholders other than our controlling shareholders or shareholders who have a personal interest in the adoption of the compensation policies; or
The total number of shares held by non-controlling shareholders and disinterested shareholders that voted against the adoption of the compensation policies does not exceed 2% of the aggregate voting rights of our company.
Under the Israeli Companies Law, the compensation arrangements for officers (other than the Chief Executive Officer) who are not directors require the approval of the compensation committee and the board of directors; provided, however, that if the compensation arrangement is not in compliance with our executive compensation policy, the arrangement may only be approved by the compensation committee and the board of directors for special reasons to be noted, and the compensation arrangement shall also require a special shareholder approval. If the compensation arrangement is an immaterial amendment to an existing compensation arrangement of an officer who is not a director and is in compliance with our executive compensation policy, the approval of the compensation committee is sufficient.
Arrangements regarding the compensation of the Chief Executive Officer and directors require the approval of the compensation committee, the board of directors and our shareholders, in that order. In certain limited cases, the compensation of a new Chief Executive Officer who is not a director may be the approved without approval of the shareholders.
100
Variable Cash Incentive
The compensation committee and board of directors may adopt, from time to time, a Cash Incentive Plan,cash incentive plan, which will set forth for each executive certain targets which form such executive'sexecutives on target cash payment (the “On Target Cash Plan”) and the rules or formula for calculation of the On Target Cash Plan payment once actual achievements are known.
The Compensationcompensation committee and Boardboard of Directorsdirectors may include inter-alia, in the On Target Cash Plan predetermined thresholds and caps to correlate an executive’s On Target Cash Plan payments with actual achievements.
The actual payment of the annual On Target Cash Plan for the active chairman of the board of directors (the "Active Chairman"“Active Chairman”), the CEO and other executives in a given year shall be capped as determined by our board of directors, but in no event shall exceed the ratio set forth in the table below.
The CEO's and Active Chairman's individual On Target Cash PlanPlans may be composed based on thea mix of (i) the Company Target;company target; (ii) Personal Target;personal targets (KPIs); and (iii) Personal Evaluation.personal evaluation. The weight to be assigned to each of the components per each of the executives shall be as set forth in the table below.
| Active Chairman | CEO | Other Executives | |
| Company Target | 100% | 50%-100% | |
| Personal | NONE | NONE | 0%-30% |
| Personal Evaluation | NONE | 0% | 0%-30% |
The Company Targetcompany target shall be determined in accordance with all or part of pre-determined targets of the sales budget, gross profit, operating profit, EBITDA, net income and EBITDA,net cash from operating activities, all in accordance with the Company’sTAT’s annual budget. If a company target shall apply to a Chief Executive Officer or a President of a subsidiary, such target may be applied up to 100% with respect to the financial results of the relevant subsidiary, and the remaining cash incentive with respect to the financial results of TAT and its subsidiaries on a consolidated basis.
101
The board of directors may determine to exclude certain profits or loss items from the company target including, but not limited to, certain expenses related to acquisition of a new company, certain expenses related to distribution of dividend, certain items of revenue or any other items per the board of directors’ sole discretion.
With regard to each one of the Company's measurable targets, reference points shall be determined in terms of numerical values, so that compliance with the precise numerical target as determined in the On Target Cash Plan shall constitute compliance with 100% of the target, and also, numerical values shall be determined which will constitute the lower threshold for compliance with the target. The actual rate of compliance with the targets shall be calculated in accordance with the said reference points. Failure to comply with the minimum threshold of at least 75% of a specific target shall not entitle the executive to an On Target Cash Plan payment of a bonus in respect of the said target. In the event of compliance at a rate of 75% or more with a specific target, the annual On Target Cash Plan shall be calculated in accordance with a key (i.e. linear, steps, etc.) which shall determine – in relation to the point of compliance with the target – the amount of the bonuspayment in terms of a percentage of the executive annual base salary, all as shall be set forth in the On Target Cash Plan. In this respect, the compensation committee and the board of directors shall have the right to determine a higher (but not lower) entitlement threshold.
The annual bonuscash incentive shall be paid to the executive in the following manner:
- 80% of the amount of the annual bonusOn Target Cash Plan payment will be paid following the approval of the financial statements of the relevant year by the board of directors.
- 20% of the amount of the annual bonusOn Target Cash Plan payment shall be deferred by one year, and shall be paid following the approval of the financial statements of such year (“Deferred Bonus”) by the board of directors.
The executive's eligibility to the payment of the Deferred Bonus shall be subject to the following cumulative conditions: (i) the CompanyTAT recorded a positive net profitEBITDA for the following year; and (ii) the executive hadTAT did not ceased to provide services to the Company during the year in which the Deferred Bonus is paid resulting from one of the followings: (a) the executive had not terminated the engagement with the Company; or (b) the Company had not terminated theterminate its engagement with the executive for "cause".cause.
102
Indemnification and Insurance of Directors and Officers
Insurance of Office Holders
The Israeli Companies Law provides that a company may, if permitted by its articles of association, enter into a contract to insure an office holder for acts or omissions performed by the office holder in such capacity for:
| Breach of his or her duty of care to the company or to another person; |
Breach of his or her duty of loyalty to the company, provided that the office holder acted in good faith and had reasonable cause to assume that his act would not prejudice the company’s interests;
Monetary liability imposed upon the office holder in favor of another person;
A monetary obligation imposed on the office holder in favor of another person who was injured by a violation, as this term is defined in section 52(54)(a)(1)(a) of the Israeli Securities Law, 1968 (“Israeli Securities Law”); and
Expenses expended by the office holder, including reasonable litigation expenses, and including attorney's fees, in respect of any proceeding under chapters 8-C, 8-D or 9-A of the Israeli Securities Law or in respect to any monetary sanction.
Indemnification of Office Holders
The Israeli Companies Law provides that a company may, if permitted by its articles of association, indemnify an office holder for acts or omissions performed by the office holder in such capacity for:
Monetary liability imposed on the office holder in favor of another person by any judgment, including a settlement or an arbitrator’s award approved by a court;
Reasonable litigation expenses, including attorney’s fees, actually incurred by the office holder as a result of an investigation or proceeding instituted against him or her by a competent authority, provided that such investigation or proceeding concluded without the filing of an indictment against the office holder or the imposition of any monetary liability in lieu of criminal proceedings, or concluded without the filing of an indictment against the office holder and a monetary liability was imposed on the officer holder in lieu of criminal proceedings with respect to a criminal offense that does not require proof of criminal intent;
A monetary obligation imposed on the office holder in favor of another person who was injured by a violation, as this term is defined in section 52(54)(a)(1)(a) of the Israeli Securities Law;
Expenses expended by the office holder, including reasonable litigation expenses, and including attorney's fees, in respect of any proceeding under chapters 8-C, 8-D or 9-A of the Israeli Securities Law or in respect to any monetary sanction;
103
Reasonable litigation expenses, including attorneys’ fees, incurred by such office holder or which were imposed on him by a court, in proceedings the company instituted against the office holder or that were instituted on the company’s behalf or by another person, or in a criminal charge from which the office holder was acquitted, or in a criminal proceeding in which the office holder was convicted of a crime which does not require proof of criminal intent; or
Any other liability, payment or expense which the company may indemnify its office holders under the Israeli Company Law, the Israeli Securities Law or other Israeli law.
In accoranceaccordance with the Israeli Companies Law, a company’s articles of association may permit the company to:
Undertake in advance to indemnify an office holder, except that with respect to a financial liability imposed on the office holder by any judgment, settlement or court-approved arbitration award, the undertaking must be limited to types of occurrences, which, in the opinion of the company’s board of directors, are, at the time of the undertaking, foreseeable due to the company’s activities and to an amount or standard that the board of directors has determined is reasonable under the circumstances; and |
Undertake in advance to indemnify an office holder for reasonable litigation expenses, including attorneys’ fees, incurred by such office holder or which were imposed on him by a court, in proceedings the company instituted against the office holder or that were instituted on the company’s behalf or by another person, or in a criminal charge from which the office holder was acquitted, or in a criminal proceeding in which the office holder was convicted of a crime which does not require proof of criminal intent.
Retroactively indemnify an office holder of the company.
104
Limitations on Exculpation, Insurance and Indemnification
The Israeli Companies Law provides that neither a provision of the articles of association permitting the company to enter into a contract to insure the liability of an office holder, nor a provision in the articles of association or a resolution of the board of directors permitting the indemnification of an office holder, nor a provision in the articles of association exempting an office holder from duty to the company shall be valid, where such insurance, indemnification or exemption relates to any of the following:
| Breach by the office holder of his duty of loyalty, except with respect to insurance coverage or indemnification if the office holder acted in good faith and had reasonable grounds to assume that the act would not prejudice the company; |
Breach by the office holder of his duty of care if such breach was committed intentionally or recklessly, unless the breach was committed only negligently;
Any act or omission committed with intent to derive an unlawful personal gain; and
Any fine or forfeiture imposed on the office holder.
Pursuant to our articles of association, the total amount of indemnification that we will pay (in addition to amounts received from an insurance company, if any) to all officers of the company, in aggregate, shall not exceed, in all circumstances, more than 25% of the company's shareholders equity as set forth in the company's recent consolidated financial statements prior to the date that the indemnity is paid. Our articles of association include provisions which allow us to insure, indemnify and exempt our office holders, subject to the provisions of the Israeli Companies Law.
We maintain a directors’ and officers’ liability insurance policy with a per claim and aggregate coverage limit of $25$10 million, including legal costs incurred in Israel. In addition, our audit committee, board of directors and shareholders resolved to indemnify our office holders, pursuant to a standard indemnification agreement that provides for indemnification of an office holder in an aggregate amount not to exceed 25% of our equity capital (net worth). To date, we have provided letters of indemnification to all of our officers and directors.
NASDAQ Exemptions for a Controlled Company
We are a controlled company within the meaning of NASDAQ Marketplace Rule 5615(c)(2), or Rule 5615(c)(2), because the FIMI FundsOpportunity V, L.P. and FIMI Israel Opportunity FIVE, Limited Partnership (the “FIMI Funds”) beneficially own more than 50% of our voting shares.
105
Under Rule 5615(c)(2), a controlled company is exempt from the following requirements of NASDAQ Marketplace Rules 5605(b)(1), 5605(d) and 5605(e) that would otherwise require that:
The majority of the company’s board of directors qualifies as independent directors, as defined under NASDAQ Marketplace Rules. |
The compensation of the chief financial officer and all other executive officers be determined, or recommended to the board of directors for determination, either by (i) a majority of the independent directors or (ii) a compensation committee comprised solely of independent directors.
Director nominees must be selected or recommended for the board of directors, either by (a) a majority of independent directors or (b) a nominations committee comprised solely of independent directors.
We intend to continue to rely on these exemptions provided under Rule 5615(c)(2).
As of December 31, 2015, we2021, TAT and ourits subsidiaries employed 623413 employees, of whom 510326 were employed in manufacturing and quality control, 3922 were employed in engineering and research and development and 7465 were employed in general & administration, sales and marketing. Of such employees, 308189 were located in Israel and 315224 were employed by Limco and Piedmont and located in the United States.
Employees in Israel are employed under collective or individual employment agreements. Senior employees in special positions and members of management are employed under individual agreements. Collective bargaining agreements are signed for specified terms and are renewed from time to time. During 2021 TAT's management and the unions in Israel agreed to enter into a collective agreement negotiation for Gedera and Turbochrome which will enter into force in April 2022.
In Turbochrom, a new collective bargaining agreement with the Union was signed on January 19, 2020 and will be in effect until March 31, 2022. The agreement is an extension of the previous agreement that was valid for a period of three years.
Certain provisions of the collective bargaining agreements between the Histadrut (General Federation of Labor in Israel) and the CoordinationCoordinating Bureau of Economic Organizations (including the Industrialists Association)Manufacturers Association of Israel) are applicable to our Israeli employees by order of the Israeli Ministry of Labor.Economy and Industry. These provisions concern mainly the length of the workday, minimum daily wages for professional workers, contributions to a pension fund,contributions, insurance for work-related accidents, procedures for dismissingterminating employees, determination of severance pay and other conditions of employment.employment terms. We generally provide our employees with benefits and working conditions beyondexceeding the required minimums. Furthermore, under the collective bargaining agreements, the wages of most of our employees are linked to the Consumer Price Index,CPI in Israel, although the extent of the linkage is limited.
106
In addition, Israeli law generally requires severance pay upon the retirement or death of an employee or termination of employment without due cause. Furthermore, Israeli employees and employers are required to pay predetermined sums to the National Insurance Institute which is similar to the United States Social Security Administration. TheThese payments thereto amount to approximately 12% of wages, with the employee contributing approximately 43% and the employer approximately 56%.
Limco-Piedmont sponsors a 401(K) QACA safe harbor profit sharing plan covering substantially all of its employees.employees in the United States. The plan requires the employer to contribute a match which is currently done on a payroll period basis, matching 100% of the first 2% and 50% of the next three percentage.3%. In addition, the plan allows for a discretionary qualified non-elective contribution for the plan year.
Beneficial Ownership of Executive Officers and Directors
Except as set forth under ‘Stock Option Plans’ and in item 7A below, none of our directors and executive officers beneficially owns more than 1% of our outstanding shares.
107
Stock Option Plans
In November 2011, our audit committee and board of directors approved a stock option plan (the “Plan”), which was subsequently approved by the Company’sTAT’s shareholders, on June 28, 2012. According to the planPlan an aggregate of 380,000980,000 options exercisable into up to 380,000 Ordinary980,000(*) ordinary shares, 0.9 NIS par value, of the CompanyTAT may be granted to certain members of our board of directors and certain senior executives in TAT at an exercise price not less than the fair market value of the shares covered by the option on the date of grant. TheIn general, the options vest over a three-year period (one-third each year), but the vesting of 50%4 years as follows: 25% of the Options is subject, in addition, to certain minimum shareholders' equity.options vest upon the lapse of 12 months following the date of grant and the remaining 75% vest on a quarterly basis over the remaining 3-year period. Pursuant to the Plan, any options that are cancelled or not exercised within the option period determined in the relevant option agreement will become available for future grants. Our board
The grant of directors has elected to allot options to Israeli employees under Israel’s capital gainthe Plan is subject to the terms stipulated by Sections 102 and 102A of the Israeli Income Tax Ordinance. Each option grant is subject to the track chosen by the Company, either Section 102 or Section 102A of the Israeli Income Tax Ordinance, and pursuant to the terms thereof, the Company is not allowed to claim as an expense for tax treatment.purposes the amounts credited to employees as benefits, including amounts recorded as salary benefits in the Company’s accounts, in respect of options granted to employees under the Plan, with the exception of the work income benefit component, if any, determined on grant date. For nonemployees and for non-Israeli employees, the share option plan is subject to Section 3(i) of the Israeli Income Tax Ordinance.
(*) of which 821,982 options are approved by the Tel Aviv Stock Exchange to be allocated to grantees.
On August 30, 2018 the Company's compensation committee, followed by the Board of Directors, approved the amended and restated company's 2012 Plan. On October 4, 2018 the company's amended and restated 2012 stock plan was approved at the annual general meeting of shareholders. As part of the company's 2012 Plan’s amendments it was determined that if the Company declares a cash dividend to its shareholders, and the distribution date of such dividend will precede the exercise date of an Option, including for the avoidance of doubt, Options that have yet to become vested and Options which have been granted prior to the adoption of such amendment to the Plan, the exercise price of the option shall be reduced in the amount equal to the cash dividend per share distributed by the Company. In addition, the maximum number of ordinary shares of the Company that may be issued under the 2012 Plan was increased by 300,000 Ordinary Shares such that after such increase the option pool is equal to an aggregate amount of 980,000 ordinary shares of the Company.
108
As of December 31, 2015,2021, options to purchase 277,500720,000 ordinary shares were outstanding under the Plan, exercisable at an average exercise price of $7.6$6.8 per share. No options were exercised during 2015.
Item 7.Major ShareholdersShareholders and Related Party Transactions
The following table sets forth certain information as of April 18, 2016,December 31, 2021, regarding the beneficial ownership by all shareholders known to us to own beneficially 5% or more of our ordinary shares:
Name | Number of Ordinary Shares Beneficially Owned(1) | Percentage of Ownership(2) | ||||||
| FIMI Funds (3) | 5,254,908 | 59.21 | % | |||||
Name | Number of Ordinary Shares Beneficially Owned(1) | Percentage of Ownership(2) | ||||||
| FIMI Funds (3) | 4,732,351 | 53.7 | % | |||||
| Leap-Tide Capital Management Inc. | 522,607 | 5.9 | % | |||||
| (1) | Beneficial ownership is determined in accordance with the rules of the |
| (2) | The percentages shown are based on |
| (3) | Based on a Schedule 13D filed on August 14, 2013, and on Schedule 13D/A filed on December 12, 2016, FIMI |
Significant Changes in the Ownership of Major Shareholders
On October 2012 two lenders to TAT’s then controlling shareholders, KMN Industries and TAT Industries, filed separate petitions to the court to enforce liens granted to such lenders by each of the controlling shareholders in certain collateral including KMN Industries’ holdings of an approximately 80% ownership interest in TAT Industries (which in turn owned approximately 43% of TAT's outstanding share capital) and KMN Industries’ direct holdings in TAT (which represented approximately 10% of TAT's outstanding share capital).
On December 18, 2012, the court appointedcourt-appointed permanent receivers on behalf of the two lenders mentioned above for the purpose of jointly enforcing the liens granted to such lenders. On March 15, 2013, the receivers of TAT’s shares announced a tender process for the sale of such shares.
On August 7, 2013, the court-appointed permanent receivers informed TAT that the FIMI Funds acquired 4,732,351 ordinary shares of TAT constituting 53.8% of TAT’s outstanding share capital as of the transaction date, after receiving all required court approvals and the transfer of the consideration by the FIMI Funds to the receivers.
On December 12, 2016, FIMI Funds acquired an additional 522,557 ordinary shares of TAT constituting 5.7% of TAT’s outstanding share capital as of the transaction date.
110
Major Shareholders Voting Rights
Our major shareholders do not have different voting rights.
Record Holders
Based on a review of the information provided to us by our transfer agent, as of March 18, 2016,December 31, 2019, there were 3932 holders of record of our ordinary shares, of which 3429 record holders holding less than 1.0% of our ordinary shares had registered addresses in the United States. These numbers are not representative of the number of beneficial holders of our shares nor is it representative of where such beneficial holders reside since many of these ordinary shares were held of record by brokers or other nominees including CEDE & Co., the nominee for the Depositary Trust Company (the central depositary for the U.S. brokerage community), which held approximately 69% of our outstanding ordinary shares as of such date.
B. Related Party Transactions
The amounts in the table below refer to TAT engineering joint venture and affiliates.
Transactions:
| Year ended December 31, | ||||||||||||
| 2021 | 2020 | 2019 | ||||||||||
| Income - | ||||||||||||
| Sales to related-party company (*) | $ | 88 | $ | 173 | $ | 596 | ||||||
| Cost and expenses - | ||||||||||||
| Supplies from related party (*) | $ | 654 | $ | 362 | $ | 552 | ||||||
111
| December 31, | ||||||||
| 2021 | 2020 | |||||||
| Trade receivables and other receivables (*) | $ | 799 | $ | 740 | ||||
| Trade payables and other payables (*) | $ | 95 | $ | 122 | ||||
Not applicable.
A. Consolidated Statements and Other Financial Information
See the consolidated financial statements, including the notes thereto, included in Item 18.
Legal Proceedings
Dividend Distribution Policy
The IsraelIsraeli Companies Law also restricts our ability to declare dividends in a waymandates that we can only distribute dividends from profits (as defined in the law), provided that there is no reasonable suspicion that the dividend distribution will prevent us from meeting our existing and future expected obligations as they come due.
B.Significant Changes
Not applicable.
Item 9.The Offer and ListingListing
A.Offer and Listing Details
NASDAQ Global Market(1) | Tel Aviv Stock Exchange | |||||||||||||||
High | Low | High | Low | |||||||||||||
| Fiscal Year Ended December 31, 2004 | 9.80 | 6.21 | — | — | ||||||||||||
| Fiscal Year Ended December 31, 2005 | 9.35 | 5.25 | NIS | 35.50 | NIS | 29.70 | ||||||||||
| Fiscal Year Ended December 31, 2006 | 19.52 | 5.92 | 82.10 | 30.25 | ||||||||||||
| Fiscal Year Ended December 31, 2007 | 28.18 | 11.37 | 116.70 | 47.68 | ||||||||||||
| Fiscal Year Ended December 31, 2008 | 12.24 | 3.62 | 53.00 | 15.52 | ||||||||||||
| Fiscal Year Ended December 31, 2009 | 9.13 | 3.95 | 33.90 | 16.53 | ||||||||||||
| Fiscal Year Ended December 31, 2010 | 9.38 | 5.19 | 37.36 | 18.30 | ||||||||||||
| Fiscal Year Ended December 31, 2011 | 6.32 | 4.20 | 22.19 | 15.68 | ||||||||||||
| Fiscal Year Ended December 31, 2012 | 6.05 | 3.64 | 23.42 | 14.81 | ||||||||||||
| Fiscal Year Ended December 31, 2013 | 8.05 | 5.58 | 28.93 | 20.60 | ||||||||||||
| Fiscal Year Ended December 31, 2014 | 8.54 | 5.85 | 30.13 | 23.28 | ||||||||||||
| Fiscal Year Ended December 31, 2015 | 7.76 | 6.11 | 29.65 | 24.26 | ||||||||||||
NASDAQ Global Market | Tel Aviv Stock Exchange | |||||||||||||||
High | Low | High | Low | |||||||||||||
| 2014 | ||||||||||||||||
First Quarter | 8.54 | 7.95 | NIS | 30.13 | NIS | 27.22 | ||||||||||
Second Quarter | 8.39 | 7.47 | 29.63 | 24.87 | ||||||||||||
Third Quarter | 8.00 | 7.10 | 28.88 | 24.01 | ||||||||||||
Fourth Quarter | 7.47 | 5.85 | 27.78 | 23.28 | ||||||||||||
| 2015 | ||||||||||||||||
First Quarter | 7.03 | 6.11 | NIS | 27.98 | NIS | 24.26 | ||||||||||
Second Quarter | 7.03 | 6.57 | 28.13 | 25.2 | ||||||||||||
Third Quarter | 7.23 | 6.28 | 28.00 | 24.61 | ||||||||||||
Fourth Quarter | 7.76 | 6.5 | 29.65 | 26.72 | ||||||||||||
| 2016 | ||||||||||||||||
First Quarter | 7.45 | 6.74 | NIS | 28.3 | NIS | 27.42 | ||||||||||
NASDAQ Global Market | Tel Aviv Stock Exchange | |||||||||||||||
High | Low | High | Low | |||||||||||||
October 2015 | 7.2 | 6.5 | NIS | 27.99 | NIS | 27.00 | ||||||||||
November 2015 | 7.76 | 6.72 | 29.57 | 26.72 | ||||||||||||
December 2015 | 7.47 | 6.86 | 29.65 | 27.35 | ||||||||||||
January 2016 | 7.45 | 6.4 | 28.1 | 26.87 | ||||||||||||
February 2016 | 7.14 | 6.57 | 27.69 | 26.67 | ||||||||||||
March 2016 | 7.09 | 6.8 | NIS | 27.57 | NIS | 26.41 | ||||||||||
Not applicable.
Not applicable.
C. Markets
Our ordinary shares are traded on the NASDAQ Global Market under the symbol “TATT”. On August 16, 2005, we listed our shares for trade on the TASE as a dual listed company.
D. Selling Shareholders
Not applicable.
Not applicable.
Not applicable.
A. Share Capital
Not applicable.
Set out below is a description of certain provisions of our memorandum of association, articles of Associationassociation and of the Israeli Companies Law related to such provisions. This description is only a summary and does not purport to be complete and is qualified by reference to the full text of the memorandum of association and articles of association, which are incorporated by reference as exhibits to this Annual Report,annual report, and to Israeli law.
Purposes and Objects of the Company
We are a public company registered with the Israeli Companies Registry and have been assigned company number 52-0035791. Section 2 of our memorandum of association provides that we were established for the purpose of engaging in the business of providing services of planning, development, consultation and instruction in the electronics field. In addition, the purpose of our company is to perform various corporate activities permissible under Israeli law.
On February 1, 2000, the Israeli Companies Law came into effect and superseded most of the provisions of the Israeli Companies Ordinance (New Version), 5743-1983, except for certain provisions which relate to liens, bankruptcy, dissolution and liquidation of companies. Under the Israeli Companies Law, various provisions, some of which are detailed below, overrule the current provisions of our articles of association.
Powers of the Directors
Under the provisions of the Israeli Companies Law which prevails over our articles of association in certain issues, a director cannot participate in a meeting nor vote on a proposal, arrangement or contract in which he or she is materially interested except in cases where a majority of the directors are materially interested in the same transaction. In addition, our directors cannot vote on compensation to themselves without the approval of our compensation committee and our shareholders at a general meeting, except for certain cases in which there is no need for the approval of the general meeting in accordance with the regulations promulgated under the Israeli Companies Law. See Item 6. “Directors, Senior Management and Employees – Board Practices – Approval of Related Party Transactions Under Israeli Law.”
The authority of our directors to enter into borrowing arrangements on our behalf is not limited, except in the same manner as any other transaction by us.
Our articles of association do not impose any mandatory retirement or age-limit requirements on our directors and our directors are not required to own shares in our company in order to qualify to serve as directors.
Rights Attached to Shares
Our authorized share capital consists of 10,000,00013,000,000 ordinary shares of a nominal value of NIS 0.90 each. All outstanding ordinary shares are validly issued, fully paid and non-assessable.
Israeli law and regulations do not impose any material foreign exchange restrictions on non-Israeli holders of our ordinary shares. In May 1998, a new “general permit” was issued under the Israeli Currency Control Law, 1978, which removed most of the restrictions that previously existed under such law, and enabled Israeli citizens to freely invest outside of Israel and freely convert Israeli currency into non-Israeli currencies.
Non-residents of Israel who purchase our ordinary shares will be able to convert dividends, if any, thereon, and any amounts payable upon our dissolution, liquidation or winding up, as well as the proceeds of any sale in Israel of our ordinary shares to an Israeli resident, into freely-repatriable dollars, at the exchange rate prevailing at the time of conversion, provided that the Israeli income tax has been withheld (or paid) with respect to such amounts or an exemption has been obtained.
The following is a discussion of Israeli and United States tax consequences material to our shareholders. To the extent that the discussion is based on new tax legislation which has not been subject to judicial or administrative interpretation, the views expressed in the discussion might not be accepted by the tax authorities in question. The discussion is not intended, and should not be construed, as legal or professional tax advice and does not exhaust all possible tax considerations.
115
You are urged to consult your own tax advisor as to the Israeli, United States and other tax consequences of the purchase, ownership and disposition of our ordinary shares, including, in particular, the effect of any non-Israeli, state or local taxes.
Israeli Tax Considerations
The following is a summary of the principal Israeli tax laws applicable to us, of the Israeli Government programs from which we benefit and of the Income Tax Law (Inflationary Adjustments), 1985. This section also contains a discussion of material Israeli tax consequences to our shareholders who are not residents or citizens of Israel. This summary does not discuss all aspects of Israeli tax law that may be relevant to a particular investor in light of his or her personal investment circumstances, or to some types of investors subject to special treatment under Israeli law. Examples of investors subject to special treatment under Israeli law include residents of Israel, traders in securities, or persons who own, directly or indirectly, 10% or more of our outstanding voting capital, all of whom are subject to special tax regimes not covered in this discussion. Some parts of this discussion are based on new tax legislation that has not been subject to judicial or administrative interpretation. The discussion should not be construed as legal or professional tax advice and does not cover all possible tax consequences.
General Corporate Tax Structure
Israeli companies are generally subject to corporate tax on their taxable income (including capital gains). The regular corporateat the rate of 23% in 2018 and thereafter. However, the effective tax rate payable by a company that derives income from an Approved Enterprise, a Benefited Enterprise, a Preferred Enterprise or a Technology Enterprise may be considerably less. Capital Gain derived by an Israeli resident company and / or royalties for Israel is 26.5% forwhich no tax clearance has been obtained from the year ended December 31, 2014 and 2015, and 25% for the year ended December 31, 2013. As of 2016ITA are subject to tax at the regular corporate tax rate is set to be 25%(23% in 2018 and thereafter).
Tax Benefits under the Law for the Encouragement of Capital Investments, 1959
We have one capital investment program that has been granted “approved enterprise”“Approved Enterprise” status under the Law for the Encouragement of Capital Investments, 1959, commonly referred to as the Investment Law,“Investment Law”, and one program that qualify as a “beneficiary enterprise”“Benefited Enterprise” pursuant to an amendment to the Investment Law that came into effect on April 1, 2005.2005 (the “April 2005 amendment”). These programs were waived as part of the "Preferred enterprise"Enterprise" which is part of the "2011 Amendment" mentioned below..
Prior to the April 2005 amendment, the Investment Law provided that capital investments in a production facility (or other eligible assets), may be designated as an approved enterpriseApproved Enterprise upon prior approval from the Investment Center of the Israel Ministry of Industry, Trade and Labor or the Investment Center.(the “Investment Center”).
The period of tax benefits for the then new beneficiary enterprise commences in the year that is the later of: (i) the year in which taxable income is first generated by a company, or (ii) a year selected by the company for commencement, on the condition that the company meets certain provisions provided by the Investment Law. The amendment does not apply to investment programs approved prior to December 31, 2004 and applies only to new investment programs. We began to generate income under the provision of the new amendment as of the beginning of 2006.
117
After expiration of the initial tax exemption period, the company is eligible for what was considered then a reduced corporate tax rate of 10% to 25%, depending on the extent of foreign investment in the company, for the following five to eight years, depending on the extentgeographic location of foreign investment in the company.Benefited Enterprise within Israel. The benefits period was limited to 12 years from completion of the investment under the approved plan or 14 years from the date of the approval, whichever is earlier. A company in which more than 25% of the shareholders are non-residents of Israel, defined under the Investment Law as a Foreign Investors Company, may be eligible for benefits for an extended period of up to ten years.
The benefits available to an approved enterpriseApproved Enterprise and beneficiary enterpriseBenefited Enterprise were conditioned upon terms stipulated in the Investment Law and the related regulations (which include making specified investments in property and equipment, and financing a percentage of these investments with share capital), and, for an approved enterprise,Approved Enterprise, the conditions contained in the certificate of approval from the Investment Center. If we do not fulfill these conditions, in whole or in part, the benefits can be cancelled and we may be required to refund the amount of the benefits, linked to the Israeli consumer price indexCPI in Israel plus interest. We believe that our approved enterpriseApproved Enterprise and beneficiary enterpriseBenefited Enterprise programs currently operatewere operated in compliance with all applicable conditions and criteria, but we cannot assure you that they will continue to do so.criteria.
We havehad derived a material portion of our operating income from our approved enterpriseApproved Enterprise and beneficiary enterpriseBenefited Enterprise facilities. We were therefore eligible for a tax exemption for a limited period on undistributed approved enterpriseApproved Enterprise and beneficiary enterpriseBenefited Enterprise income. We intend to reinvest the entire amount of our tax-exempt income and not to distribute this income as a dividend.dividend
118
Until December 31, 2010, TAT and Turbochrome have elected to participate in the alternative package of tax benefits for their Approved and Benefited Enterprise under the law.
Pursuant to such Law, the income derived from those enterprises was exempted from Israeli corporate tax for a specified benefit period (except to the extent that dividends are distributed during the tax-exemption period other than upon liquidation) and subject to reduced corporate tax rates for an additional period.
Tax Benefits under the 2011 Amendment
Under the transitional provisions of the 2011 Amendment, the company elected to irrevocably implement the 2011 Amendment with respect to its existing Approved and Beneficiary Enterprises while waiving benefits provided under the legislation prior to the 2011 Amendment.
Dividends paid out of income attributed to a Preferred Enterprise will be subject to a withholding tax at the source at the rate of 20%, or such lower rate as may be provided in an applicable tax treaty. However, if such dividends are paid to an Israeli company, no tax is required to be withheld (although, if the funds are subsequently distributed to individuals or to non-Israeli residents (individuals and corporations), the withholding tax would apply).
As of January 1, 2014, a Preferred Company is entitled to a reduced corporate tax rate of 16% with respect to its income derived from its Preferred Enterprise, unless the Preferred Enterprise is located in development area A, in which case the tax rate as of January 1, 2017 was 7.5% (our operations are currently not located in development area A). Income which is not derived from Preferred Enterprise is subject to the regular corporate tax rate (24% in tax year 2017 and 23% as of January 1, 2018).
119
TAT is located in an area in Israel that is designated as elsewhere and as such is entitled to reduce tax rates of 16% (as of 2014).
Turbochrome is located in an area in Israel that is designated as Zone A and as such entitled to reduce tax rates of 7.5% (as of 2017).
Tax Benefits under the 2017 Amendment
An amendment to the Investment Law, which became effective as of January 1, 2017, provides new tax benefit to Preferred companies for two types of "Technology Enterprise", as described below, and is in addition to the other existing tax beneficial programs under the Investment Law.
The new incentives regime will apply to "Preferred Technological Enterprises" that meet certain conditions, as detailed in the 2017 amendment. Preferred Technological Enterprises will be subject to a corporate tax rate of 12% unless the Preferred Technological Enterprise is located in development zone A, in which case the rate will be 7.5% with respect to the portion of income derived from intellectual property developed in Israel. The withholding tax on dividends from income derived from intellectual property of the Preferred Technological Enterprises will be 4% for dividends paid to a foreign parent company holding at least 90% of the shares of the distributing company. For other dividend distributions, the withholding tax rate will be 20% (or a lower rate under a tax treaty, if applicable).
We cannot assure you that we will continue to qualify as an Industrial Company or that the benefits described above will be available to us in the future.
120
Tax Benefits and Grants for Research and Development
Israeli tax law allows, under specific conditions, a tax deduction in the year incurred for expenditures, including capital expenditures, relating to scientific research and development projects, if the expenditures are approved by the relevant Israeli government ministry, determined by the field of research, and the research and development is for the promotion of the company and is carried out by or on behalf of the company seeking such deduction. Expenditures not so approved are deductible over a three-year period. However, expenditures from proceeds made available to us through government grants are not deductible according to Israeli law.
Tax Benefits under the Law for the Encouragement of Industry (Taxes), 1969
According to the Law for the Encouragement of Industry (Taxes), 1969 or the Industry(the “Industry Encouragement Law,Law”), an Industrial Company‘Industrial Company’ is aan Israeli resident company, resident in Israel,with at least 90% of the income of which, in a given tax year, determined in Israeli currency (exclusive of income from some government loans, capital gains, interest and dividends),loans) is derived from an industrial enterpriseIndustrial Enterprise owned by it.it and located in Israel or in the "Area", in accordance with the definition in the section 3a of the Ordinance. An “industrial enterprise”‘Industrial Enterprise‘ is defined as an enterprise whose major activity in a given tax year is industrial production activity.
Under the Industry Encouragement Law, Industrial Companies are entitled to the following preferred corporate tax benefits:
Amortization of purchases of acquired technology and patents over an eight-year period for tax purposes;
Amortization of specified expenses incurred in connection with a public issuance of securities over a three-year period for tax purposes;
Right to elect, under specified conditions, to file a consolidated tax return with additional related Israeli Industrial Companies; and
Accelerated depreciation rates on equipment and buildings.
Eligibility for benefits under the Industry Encouragement Law is not subject to receipt of prior approval from any governmental authority.
Special Provisions Relating to Taxation under Inflationary Conditions
The Income Tax Law (Inflationary Adjustments), 1985, referred to as the Inflationary Adjustments Law, which attempts to overcome the problems presented to a traditional tax system by an economy undergoing rapid inflation. The Inflationary Adjustments Law is highly complex.
On February 26, 2008, the Israeli Parliament (the Knesset) enacted the Income Tax Law (Inflationary Adjustments) (Amendment No. 20) (Restriction of Effective Period), 2008 which we refer to as the Inflationary(the “Inflationary Adjustments Amendment.Amendment”). In accordance with the Inflationary Adjustments Amendment, the effective period of the Inflationary Adjustments Law will cease at the end of the 2007 tax year and as of the 2008 tax year the provisions of the law shallare no longer apply, other than the transitional provisions intended at preventing distortions in the tax calculations. In accordance with the Inflationary Adjustments Amendment, commencing the 2008 tax year, income for tax purposes willis no longer be adjusted to a real (net of inflation) measurement basis. Furthermore, the depreciation of inflation immune assets and carried forward tax losses willare no longer be linked to the Israeli consumer price index.CPI in Israel.
Taxation of Dividends Paid on our Ordinary Shares
Taxation of Israeli Shareholders
A distribution of dividends from income, which is not attributed to an Approved Enterprise/ Benefited Enterprise/ Preferred Enterprise to an Israeli resident individuals areindividual, will generally be subject to Israeli income tax, on the receipt of dividends paid on our ordinary shares, other than bonus shares (share dividends) or stock dividends, at the rate of 25%, or 30% for a shareholderrecipient that is considered a material shareholder"Controlling Shareholder" (within the meaning of the Israeli Income Tax Ordinance) at the time of distribution or at any time during the 12-month period preceding such distribution. Dividends paid on our ordinary shares
However, dividends distributed from taxable income accrued during the benefits period of a Benefited Enterprise, subject to certain time limitations, are generally subject to Israeli companies are generally exempt from such tax.
122
Generally, Israeli resident corporations are exempt from Israeli corporate tax on the receipt of dividends paid on shares of Israeli resident corporations and that the dividends was fully taxed in corporate tax rate in Israel, unless the dividends are distributed from taxable income that has accrued during the benefits period of Approved Enterprise of Benefited Enterprise, in which case they are taxable at the rate of 15%.
3% surtax will apply with respect to Israeli companies are not subjectindividuals on top of the aforementioned tax rates when annual taxable income exceeds NIS 663,240 (with respect to withholding tax. 2022). The amount is updated every year.
It should be mentionednoted that we cannot assure you that we will designate the profits that are being distributed in a way that will reduce shareholders’ tax liability to those tax rates.
Taxation of Non-Israeli Shareholders
As aforesaid, dividends derived from any of our income generated by an Approved Enterprise (oror Benefited Enterprise)Enterprise, are subject to withholding tax at a rate of 15% (or less based on applicable tax treaty), and dividends derived from any of our income generated by a Preferred Enterprise are subject to withholding tax at a rate of 20% (or less based on applicable tax treaty).
It should be noted that 3% surtax will apply on individuals on top of the aforementioned tax rates when annual taxable income exceeds NIS 663,240 (with respect to 2022). The amount is updated every year.
123
Under the U.S.-IsraelUnited States-Israel Tax Treaty, the maximum withholdingrate of tax withheld at source in Israel on dividends paid to a holder of our ordinary shares who is a treaty U.S. resident (for purposes of the United States-Israel Tax Treaty) is 25%,. However, generally the maximum rate of withholding tax on dividends, not generated by Approved / Benefited / Preferred Enterprises, that are paid to a U.S. corporation holding at least 10% or 15% ifmore of our outstanding voting capital from the start of the tax year preceding the distribution of the dividend through (and including) the distribution of the dividends, are generated by an Approved Enterprise (or Benefited Enterprise or Preferred Enterprises). However, if the income out of which the dividend is being paid is not attributable to an Approved Enterprise (or Benefited Enterprise or Preferred Enterprises) and not12.5%, provided that no more than 25% of our gross income of such preceding year consists of certain types of dividends and interest or dividends, then suchif a certificate for a reduced withholding tax rate is reducedobtained in advance from the Israeli Tax Authority. Notwithstanding the foregoing, dividends distributed from income attributed to 12.5%an Approved Enterprise, Benefited Enterprise or a Preferred Enterprise are subject to withholding tax rate of 15% for a non-resident that issuch a U.S. corporation and holds 10% or more ofshareholder, provided that the condition related to our issued voting power duringgross income for the partprevious year (as set forth in the previous sentence) is met.
The aforementioned rates under the United States-Israel Tax Treaty will not apply if the dividend income was derived through a permanent establishment of the U.S. resident in Israel.
When the amount of tax year that precedesdue is not fully withheld at source, such non-Israeli resident is obligated to file a tax return, report his or her Israeli income and pay the date of paymentbalance of the dividend and during the wholeamount of its prior tax year.due.
Capital gains taxes applicable to non-Israeli shareholders
Capital gains from the sale of our ordinary shares by non-Israeli shareholders are exempt from Israeli taxation, provided that the capital gain is not derived from a permanent establishment in Israel.Israel according to section 97(b2) to the Israeli income tax ordinance. In addition, the U.S.-Israel tax treatyTax Treaty exempts U.S. residents who hold less than 10% of our voting rights, and who held less than 10% of our voting rights during the 12 months prior to a sale of their shares, from Israeli capital gains tax in connection with such sale.
124
United States Federal Income Tax Consequences
The following discussion summarizes the material U.S. federal income tax considerations generally applicable to the purchase, ownership and disposition of our ordinary shares. Unless otherwise stated, this summary deals only with shareholders that are U.S. Holders (as defined below) who hold their ordinary shares as capital assets.
As used in this section, the term “U.S. Holder” means a beneficial owner of an ordinary share who is:
An individual citizen or resident of the United States or an individual treated as a U.S. citizen or resident for U.S. federal income tax purposes;
A corporation or other entity taxable as a corporation for U.S. federal income tax purposes created or organized in or under the laws of the United States, any State or the District of Columbia;
An estate, the income of which is subject to U.S. federal income taxation regardless of its source; or
Any trust if (A)(i) a court within the United States is able to exercise primary supervision over the administration of the trust and (ii) one or more United States persons have the authority to control all substantial decisions of the trust, or (B) such trust validly elects to be treated as a United States person.
The term “Non-U.S. Holder” means a beneficial owner of an ordinary share that is an individual, corporation, estate or trust and is not a U.S. Holder. The tax consequences to a Non-U.S. Holder may differ substantially from the tax consequences to a U.S. Holder. Certain aspects of U.S. federal income tax relevant to a Non-U.S. Holder are discussed below.
This description is based on provisions of the U.S. Internal Revenue Code of 1986, as amended (the “Code”), existing and proposed U.S. Treasury regulations promulgated thereunder, administrative and judicial interpretations thereof, and the US-IsraelU.S.-Israel Tax Treaty, each as in effect as of the date of this prospectus.annual report. In addition, this description also relates to the Tax Cuts and Jobs Act (“TCJA”) signed into law on December 22, 2017. These sources may change, possibly with retroactive effect, and are open to differing interpretations. This description does not discuss all aspects of U.S. federal income taxation that may be applicable to investors in light of their particular circumstances or to investors who are subject to special treatment under U.S. federal income tax law, including:
Insurance companies;
Dealers in stocks, securities or currencies;
Financial institutions and financial services entities;
Real estate investment trusts;
Regulated investment companies;
125
Persons that receive ordinary shares in connection with the performance of services;
Tax-exempt organizations;
Persons that hold ordinary shares as part of a straddle or appreciated financial position or as part of a hedging, conversion or other integrated instrument;
Persons who hold the ordinary shares through partnerships or other pass-through entities;
Individual retirement and other tax-deferred accounts;
Expatriates of the United States and certain former long-term residents of the United States;
Persons liable for the alternative minimum tax;
Persons having a “functional currency” other than the U.S. dollar; and
Direct, indirect or constructive owners of 10% or more, by voting power or value, of our company.
If a partnership or an entity treated as a partnership for U.S. federal income tax purposes owns ordinary shares, the U.S. federal income tax treatment of a partner in such a partnership will generally depend upon the status of the partner and the activities of the partnership. A partnership that owns ordinary shares and the partners in such partnership should consult their own tax own advisors about the U.S. federal income tax consequences of holding and disposing of ordinary shares.
This discussion does not consider the possible application of U.S. federal gift or estate tax or alternative minimum tax.
All investors are urged to consult their own tax advisors as to the particular tax consequences to them of an investment in our ordinary shares, including the effect and applicability of United States federal, state, local and foreign income and other tax laws (including estate and gift tax laws) and tax treaties.
Distributions Paid on the Ordinary Shares
Subject to the discussion below under “Passive Foreign Investment Company Considerations,” a U.S. Holder generally will be required to include in his or her gross income as ordinary dividend income the amount of any distributions paid on the ordinary shares, including the amount of any Israeli taxes withheld, to the extent that those distributions are paid out of our current or accumulated earnings and profits, as determined for U.S. federal income tax purposes. Subject to the discussion below under “Passive Foreign Investment Company Considerations,” distributions in excess of our earnings and profits will be applied against and will reduce the U.S. Holder’s tax basis in its ordinary shares and, to the extent they exceed that tax basis, will be treated as gain from a sale or exchange of those ordinary shares. OurIn some cases, our dividends will not qualify for the dividends-received deduction applicable in some cases to U.S. corporations.
126
Dividends that we pay in NIS, including the amount of any Israeli taxes withheld therefrom, will be included in your income in a U.S. dollar amount calculated by reference to the exchange rate in effect on the day such dividends are received, regardless of whether the payment is in fact converted into U.S. dollars. A U.S. Holder who receives payment in NIS and converts NIS into U.S. dollars at an exchange rate other than the rate in effect on such day will have a foreign currency exchange gain or loss that would be treated as ordinary income or loss. U.S. Holders should consult their own tax advisors concerning the U.S. tax consequences of acquiring, holding and disposing of NIS.
Subject to certain limitations, “qualified dividend income” received by a non-corporate U.S. Holder in tax years beginning on or before December 31, 2010 will generally be subject to taxtaxation in the U.S at a reduced maximum taxlower rate of 15%.than ordinary income. Distributions taxable as dividends paid on the ordinary shares should qualify for the 15%lower tax rate provided that we are not a passive foreign investment company (as described below) for U.S. tax purposes and that either: (i) we are entitled to benefits under the income tax treaty between the United States and Israel (the “U.S.-Israel Tax Treaty”) or (ii) the ordinary shares are readily tradable on an established securities market in the United States and certain other requirements are met. We believe that we are entitled to benefits under the U.S.-Israel Tax Treaty and that the ordinary shares currently will be readily tradable on an established securities market in the United States. However, no assurance can be given that the ordinary shares will remain readily tradable. The rate reduction does not apply unless certain holding period requirements are satisfied. With respect to the ordinary shares, the U.S. Holder must have held such shares for at least 61 days during the 121-day period beginning 60 days before the ex-dividend date. The rate reduction also does not apply to dividends received from passive foreign investment companies, see discussion below, or in respect of certain hedged positions or in certain other situations. The legislation enacting the reduced tax rate contains special rules for computing the foreign tax credit limitation of a taxpayer who receives dividends subject to the reduced tax rate. U.S. Holders of ordinary shares should consult their own tax advisors regarding the effect of these rules in their particular circumstances.
Subject to the discussion below under “Information Reporting and Back-up Withholding,” a Non-U.S. Holder generally will not be subject to U.S. federal income or withholding tax on dividends received on ordinary shares unless that income is effectively connected with the conduct by that Non-U.S. Holder of a trade or business in the United States, in which case a corporate Non-U.S. Holder may also be subject to the U.S. branch profits tax.
127
Foreign Tax Credit
Any dividend income resulting from distributions we pay to a U.S. Holder with respect to the ordinary shares generally willmay be treated as foreign source income for U.S. foreign tax credit limitation purposes. SubjectFor all taxable years ended until December 31, 2017, and subject to certain conditions and limitations, Israeli tax withheld on dividends may be deducted from taxable income or credited against a U.S. Holder’s U.S. federal income tax liability. The limitation on foreign taxes eligible for credit is calculated separately with respect to specific classes of income. For this purpose, in general, any dividend that we distribute generally willshould constitute “passive category income,” or, in the case of certain U.S. Holders, “general category income.”
Starting January 1, 2018, and with respect to our corporate U.S. Holders, the TCJA provides a 100% deduction for the foreign-source portion of dividends received after January 1, 2018 from “specified 10-percent owned foreign corporations” by U.S. corporate holders, subject to a one-year holding period. No foreign tax credit, including Israeli withholding tax (or deduction for foreign taxes paid with respect to qualifying dividends) would be permitted for foreign taxes paid or accrued with respect to a qualifying dividend. Deduction would be unavailable for “hybrid dividends.” The dividend received deduction enacted under the TCJA may not apply to dividends from a passive foreign investment company.
The rules relating to the determination of foreign source income and the foreign tax credit are complex, and the availability of a foreign tax credit depends on numerous factors. Each investor who is a U.S. Holder should consult with its own tax advisor to determine whether its income with respect to the ordinary shares would be foreign source income and whether and to what extent that investor would be entitled to a foreign tax credit.
Disposition of Ordinary Shares
Upon the sale or other disposition of ordinary shares, subject to the discussion below under “Passive Foreign Investment Company Considerations,” a U.S. Holder generally willshould recognize capital gain or loss equal to the difference between the amount realized on the disposition and the holder’s adjusted tax basis in the ordinary shares. U.S. Holders should consult their own tax advisors with respect to the tax consequences of the receipt of a currency other than U.S. dollars upon such sale or other disposition.
128
Gain or loss upon the disposition of the ordinary shares will be treated as long-term if, at the time of the sale or disposition, the ordinary shares were held for more than one year. The deductibility of capital losses by a U.S. Holder is subject to limitations. In general, any gain or loss recognized by a U.S. Holder on the sale or other disposition of ordinary shares will be U.S. source income or loss for U.S. foreign tax credit purposes. U.S. Holders should consult their own tax advisors concerning the source of income for U.S. foreign tax credit purposes and the effect of the U.S.-Israel Tax Treaty on the source of income.
Subject to the discussion below under “Information Reporting and Back-up Withholding,” a Non-U.S. Holder generally will not be subject to U.S. federal income or withholding tax on any gain realized on the sale or exchange of ordinary shares unless:
that gain is effectively connected with the conduct by the Non-U.S. Holder of a trade or business in the United States, and, if a tax treaty applies, is attributable to a permanent establishment or fixed base of the Non-U.S. Holder in the United States; or
in the case of any gain realized by an individual Non-U.S. Holder, that holder is present in the United States for 183 days or more in the taxable year of the sale or exchange, and other conditions are met.
Passive Foreign Investment Company Considerations
Special U.S. federal income tax rules apply to U.S. Holders owning shares of a passive foreign investment company. A non-U.S. corporation will be considered a passive foreign investment company for any taxable year in which, after applying certain look-through rules, 75% or more of its gross income consists of specified types of passive income, or 50% or more of the average value of its assets consists of assets that produce, or are held for the production of, passive income. For this purpose, passive income includesmay include dividends, interest, royalties, rents, annuities and the excess of gains over losses from the disposition of assets which produce passive income.
If we were classified as a passive foreign investment company, a U.S. Holder could be subject to increased tax liability upon the sale or other disposition of ordinary shares or upon the receipt of amounts treated as “excess distributions.” Under these rules, the excess distribution and any gain would be allocated ratably over the U.S. Holder’s holding period for the ordinary shares, and the amount allocated to the current taxable year and any taxable year prior to the first taxable year in which we were a passive foreign investment company would be taxed as ordinary income. The amount allocated to each of the other taxable years would be subject to tax at the highest marginal tax rate in effect for the applicable class of taxpayer for that year, and an interest charge for the deemed deferral benefit would be imposed on the resulting tax allocated to such other taxable years. The tax liability with respect to the amount allocated to years prior to the year of the disposition, or “excess distribution,” cannot be offset by any net operating losses. In addition, holders of stockshares in a passive foreign investment company may not receive a “step-up” in basis on shares acquired from a decedent. If we are a passive foreign investment company in any year, a U.S. Holder would be required to file an annual return on IRS Form 8621 regarding distributions received with respect to ordinary shares and any gain realized on the disposition of ordinary shares.
Based on our current and projected income, assets and activities, we do not believe that we will be a passive foreign investment company for our current taxable year. However, because the determination of whether we are a passive foreign investment company is based upon the composition of our income and assets from time to time, we cannot be certain that we will not be considered a passive foreign investment company for the current taxable year or any future taxable year.
The passive foreign investment company tax consequences described above will not apply to a U.S. Holder if the U.S. Holder makes ana timely election to treat us as a qualified electing fund or QEF.(“QEF”). If a U.S. Holder makes a timely QEF election, the U.S. Holder would be required to include in income for each taxable year it’sits pro rata share of our ordinary earnings as ordinary income and it’sits pro rata share of our net capital gain as long-term capital gain, whether or not such amounts are actually distributed to the U.S. Holder. However, a U.S. Holder would not be eligible to make a QEF election unless we comply with certain applicable information reporting requirements. We will provide U.S. Holders with the information needed to report income and gain under a QEF election should we become a passive foreign investment company.
As an alternative to making a QEF election, a U.S. Holder of passive foreign investment company stock which is publicly traded may in certain circumstances avoid certain of the tax consequences generally applicable to holders of a passive foreign investment company by electing to mark the stock to market annually and recognizing as ordinary income or loss each year an amount equal to the difference as of the close of the taxable year between the fair market value of the passive foreign investment company stock and the U.S. Holder’s adjusted tax basis in the passive foreign investment company stock. Losses would be allowed only to the extent of net mark-to-market gain previously included by the U.S. Holder under the election for prior taxable years. Income recognized and deductions allowed under the mark-to-market provisions, as well as any gain or loss on the disposition of ordinary shares with respect to which the mark to marketmark-to-market election is made, are generally treated as ordinary income or loss (except that loss is treated as capital loss to the extent the loss exceeds the net mark-to-market gains, if any, that a U.S. Holder included in its income with respect to such ordinary shares in prior years). However, gain or loss from the disposition of ordinary shares (as to which a “mark-to-market” election was made) in a year in which we are no longer a passive foreign investment company, will be capital gain or loss. The mark-to-market election is available for so long as our ordinary shares constitute “marketable stock,” which includes stock of a passive foreign investment company that is “regularly traded” on a “qualified exchange or other market.” Generally, a “qualified exchange or other market” includes a national securities exchange that is registered with the Securities and Exchange CommissionSEC or the national market system established pursuant to Section 11A of the Securities Exchange Act of 1934. A class of stock that is traded on one or more qualified exchanges or other markets is “regularly traded” on an exchange or market for any calendar year during which that class of stock is traded, other than in the minimized quantities, on at least 15 days during each calendar quarter. We believe that The NASDAQ Global Market will constitute a qualified exchange or other market for this purpose. However, we cannot be certain that our ordinary shares will continue to trade on The NASDAQ Global Market or that the ordinary shares will be regularly traded for this purpose.
The rules applicable to owning shares of a passive foreign investment company are complex, and each holder who is a U.S. Holder should consult with its own tax advisor regarding the consequences of investing in a passive foreign investment company.
Medicare Tax
Certain U.S. Holders that are individuals, estates or trusts may be subject to a 3.8% Net Investment Income tax on all or a portion of their “net investment income,” which may include all or a portion of their dividend income and net gains from the disposition of ordinary shares and warrants. Each U.S. Holder that is an individual, estate or trust is urged to consult its tax advisors regarding the applicability of the Net Investment Income tax to its income and gains in respect of its investment in our ordinary shares and warrants, including with respect to the eligibility to claim foreign tax credit against such tax.
131
Information Reporting and Backup Withholding
Payments in respect of ordinary shares may be subject to information reporting to the U.S. Internal Revenue Service (the “IRS”) and to U.S. backup withholding tax at a rate equal to the fourth lowest income tax rate applicable to individuals (which, under current law, is 28%24%). Backup withholding will not apply, however, if you (i) are a corporation or come within certain exempt categories, and demonstrate the fact when so required, or (ii) furnish a correct taxpayer identification number and make any other required certification. U.S. Holders who are required to establish their exempt status generally must provide such certification on IRS Form W-9.
Backup withholding is not an additional tax. Amounts withheld under the backup withholding rules may be credited against a U.S. Holder’s U.S. tax liability, and a U.S. Holder may obtain a refund of any excess amounts withheld under the backup withholding rules by filing the appropriate claim for refund with the IRS.
Any U.S. holder who holds 10% or more in vote or value of our ordinary shares will be subject to certain additional United States information reporting requirements.
U.S. Gift and Estate Tax
An individual U.S. Holder of ordinary shares will generally be subject to U.S. gift and estate taxes with respect to ordinary shares in the same manner and to the same extent as with respect to other types of personal property.
Not applicable.
Not applicable.
132
G.Documents on Display
We are subject to the reporting requirements of the United States Securities Exchange Act of 1934, as amended, as applicable to “foreign private issuers” as defined in Rule 3b-4 under the Exchange Act, and in accordance therewith, we file annual and interim reports and other information with the Securities and Exchange Commission.SEC.
As a foreign private issuer, we are exempt from certain provisions of the Exchange Act. Accordingly, our proxy solicitations are not subject to the disclosure and procedural requirements of Regulation 14A under the Exchange Act and transactions in our equity securities by our officers and directors are exempt from reporting and the “short-swing” profit recovery provisions contained in Section 16 of the Exchange Act. In addition, we are not required under the Exchange Act to file periodic reports and financial statements as frequently or as promptly as United States companies whose securities are registered under the Exchange Act. However, we make available on our website www.tat-technologies.com,, our annual audited financial statements, which have been examined and reported on, with an opinion expressed by an independent public accounting firm, and we intend to file reports with the Securities and Exchange CommissionSEC on Form 6-K containing unaudited financial information for the first three quarters of each fiscal year.
This annual report on Form 20-F and the exhibits thereto and any other document we file pursuant to the Exchange Act may be inspected without charge and copied at prescribed rates at the following Securities and Exchange CommissionSEC public reference room at 100 F Street, N.E., Room 1580, Washington, D.C. 20549; and on the Securities and Exchange Commission Internet siteSEC website (http://www.sec.gov) and on our website www.tat-technologies.com. You may obtain information on the operation of the Securities and Exchange Commission’sSEC’s public reference room in Washington, D.C. by calling the Securities and Exchange CommissionSEC at 1-800-SEC-0330. The Exchange Act file number for our Securities and Exchange CommissionSEC filings is 0-16050.
In addition,addition, since August 16, 2005, we are also listed on the TASE. From such date we submit copies of all our filings with the SEC to the Israeli Securities AuthorityISA and TASE. Such copies can be retrieved electronically through the TASE internet messaging system (www.maya.tase.co.il) and, in addition, through the MAGNA distribution site of the Israeli Securities Authority ISA (www.magna.isa.gov.il)www.magna.isa.gov.il).
The documents concerning our company which are referred to in this annual report may also be inspected at our offices located at Re’em Industrial Park Neta, Boulevard Bnei Ayish, Gedera, Israel.
H.Subsidiary Information
Not applicable.
133
We do not own and have not issued any market risk sensitive instruments about which disclosure is required to be provided pursuant to this Item.
Effects of Currency Exchange Fluctuations
Our financial statements are stated in dollars, while a portion of our expenses, primarily labor expenses, is incurred in NIS and a part of our revenues are quoted in NIS. The company entered into Forward transactions in order to minimize its currency risk from expenses paid in NIS. Additionally, certain assets, as well as a portion of our liabilities, are denominated in NIS. As a result, our operations may be affected by fluctuations of the U.S. dollar/NIS exchange rate. During 2013 the NIS appreciated against the U.S. dollar by 7.5%. Such trend was continuedWe are hedging a portion of our exchange rate risk through the end of 2014, during which the NIS appreciated by additional 12% by the end of 2014. During 2015 the exchange rates between the NISforward transactions and the U.S. dollar have not changed materially. We estimate that a devaluationuse of 1% of the U.S. dollar against the NIS would result in a decrease of approximately $220,000 in our operating income.
Not Applicable.
None.
None.
134
| (a) | Disclosure Controls and Procedures |
We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in itsour Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’sSEC’s rules and forms, and that such information is accumulated and communicated to our chief executive officer and chief financial officer to allow timely decisions regarding required disclosure. Our management, including our chief executive officer and chief financial officer, conducted an evaluation of our disclosure controls and procedures, as defined under Exchange Act Rule 13a-15(e), as of the end of the period covered by this Annual Reportannual report on Form 20-F. Based upon that evaluation, our chief executive officer and chief financial officer have concluded that, as of such date, our disclosure controls and procedures were effective.
(b) | Management's Annual Report on Internal Control over Financial Reporting |
Our management is responsible for establishing and maintaining adequate internal control over our financial reporting. Internal control over financial reporting is defined in Rule 13a-15(f) or 15d-15(f) promulgated under the Securities Exchange Act of 1934 as a process designed by, or under the supervision of, the company’s principal executive and principal financial officers and effected by the company’s board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:
Pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the company;
Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and
135
Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use of disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2015.2021. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework (2013). Based on that assessment, our management concluded that as of December 31, 2015,2021, our internal control over financial reporting is effective.
(c) Attestation report of independent registered public accounting firm
This annual reportreport does not include an attestation report of our independent registered public accounting firm regarding internal control over financial report. Management’s report was not subject to attestation by our independent registered public accounting firm pursuant to temporary rules of the Securities and Exchange CommissionSEC that permit us to provide only management’s report in this annual report.
(d) Changes in Internal Control over Financial Reporting |
There was no change in our internal control over financial reporting that occurred during the period covered by this annual report that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
136
Our board of directors has determined that each member of our audit committee each of whom also qualifies as independent director, meets the definition of an audit committee financial expert, as defined by rules of the Securities and Exchange Commission.SEC. For a brief listing of the relevant experience of the member of our audit committee, see Item 6.A. “Directors, Senior Management and Employees — Directors and Senior Management.”
Item 16B.Code of Ethics
We have adopted a code of ethics that applies to our chief executive officer and all senior financial officers of our company, including the chief financial officer, chief accounting officer or controller, or persons performing similar functions. The code of ethics is publicly available on our website at www.tat-technologies.com .www.tat-technologies.com. Written copies are available upon request. If we make any substantive amendment to the code of ethics or grant any waivers, including any implicit waiver, from a provision of the codes of ethics, we will disclose the nature of such amendment or waiver on our website.
Item 16C.Principal AccountantAccountant Fees and Services
Fees Paid to Independent Public Accountant
The following table sets forth, for each of the years indicated, the fees paid to our principal independent registered public accounting firm. All of such fees were pre-approved by our Audit Committee.audit committee.
| Year Ended December 31, | ||||||||
| Services Rendered | 2021 | 2020 | ||||||
| Audit (1) | $ | 192,834 | $ | 192,834 | ||||
| Tax (2) | 17,685 | 26,198 | ||||||
| Total | $ | 210,519 | $ | 219,032 | ||||
| Year Ended December 31, | |||||||||
| Services Rendered | 2015 | 2014 | |||||||
Audit (1) | $ | 219,000 | $ | 193,000 | |||||
Tax (2) | 80,000 | 40,000 | |||||||
| Total | $ | 299,000 | $ | 233,000 | |||||
| (1) | Audit fees are for audit services for each of the years shown in the table, including fees associated with the annual audit and reviews of our quarterly financial results, consultations on various accounting issues and audit services provided in connection with other statutory or regulatory filings. |
| (2) | Tax fees relate to professional services rendered for tax compliance and tax advice. These services include assistance regarding international and Israeli taxation. |
137
Pre-Approval Policies and Procedures
Our Audit Committeeaudit committee has adopted a policy and procedures for the pre-approval of audit and non-audit services rendered by our independent registered public accounting firm Kesselman & Kesselman, a member of PricewaterhouseCoopers International Ltd. Pre-approval of an audit or non-audit service may be given as a general pre-approval, as part of the audit committee’s approval of the scope of the engagement of our independent auditor, or on an individual basis. Any proposed services exceeding general pre-approved levels also require specific pre-approval by our audit committee. The policy prohibits retention of the independent public accountants to perform the prohibited non-audit functions defined in Section 201 of the Sarbanes-Oxley Act or the rules of the SEC, and also requires the Audit Committeeaudit committee to consider whether proposed services are compatible with the independence of the public accountants.
Item 16D.Exemptions from the Listing StandardsStandards for Audit Committee
Not Applicable.
Not Applicable.
Item 16F. Change in Registrant’s Certifying Accountant.
Not Applicable.
138
Item 16G.Corporate Governance
The following are the significant ways in which our corporate governance practices differ from those followed by domesticUnited States companies under the Nasdaq Rules:rules:
Shareholder Approval. Although the Nasdaq Rulesrules generally require shareholder approval of equity compensation plans and material amendments thereto, we follow Israeli Companies Law, which is to have such plans and amendments approved only by the board of directors, unless such arrangements are for the compensation of directors, Chief Executive Officer or a transaction with the controlling shareholder, in which case they also require the approval of the compensation committee and the shareholders.
In addition, rather than follow the Nasdaq Rulesrules requiring shareholder approval for the issuance of securities in certain circumstances, we follow Israeli law, under which a private placement of securities requires approval by our board of directors and shareholders if it will cause a person to become a controlling shareholder (generally presumed at 25% ownership) or if:
| o | The securities issued amount to 20% or more of our outstanding voting rights before the issuance; |
| o | Some or all of the consideration is other than cash or listed securities or the transaction is not |
| o | The transaction will increase the relative holdings of a shareholder that holds 5% or more of our outstanding share capital or voting rights or that it will cause any person to become, as a result of the issuance, a holder of more than 5% of our outstanding share capital or voting rights. |
Annual Reports. While the Nasdaq RulesNASDAQ rules generally require that companies send an annual report to shareholders prior to the annual general meeting, we follow the generally accepted business practice for companies in Israel. Specifically, we file annual reports on Form 20-F, which contain financial statements audited by an independent registered public accounting firm, electronically with the SEC and post a copy on our website.
We have elected to furnish financial statements and related information specified in Item 18.
| Consolidated Financial Statements of the Company | |
| Report of Independent Registered Public Accounting Firm | |
| Consolidated Balance Sheets | |
| Consolidated Statements of Operations | |
| Consolidated Statements of Comprehensive Income | |
| Consolidated Statements of Changes in | |
| Consolidated Statements of Cash Flows | |
| Notes to Consolidated Financial Statements |
The following exhibits are filed as a part of this Annual Report:
| 1.1 | Memorandum of Association of the Registrant(1) |
Articles of Association of the Registrant |
| 4.2 | Agreement dated February 10, 2000, by and between the Registrant and TAT Industries Ltd. (English summary translation) (2) |
| 101.SCH | Inline XBRL Taxonomy Extension Schema Document. |
| 101.CAL | Inline XBRL Taxonomy Extension Calculation Linkbase Document. |
| 101.DEF | Inline XBRL Taxonomy Definition Linkbase Document. |
| 101.LAB | Inline XBRL Taxonomy Extension Label Linkbase Document. |
| 101.PRE | Inline XBRL Taxonomy Extension Presentation Linkbase Document |
| 104 | Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101) |
_________________
| (1) | Filed as an exhibit to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 1992, and incorporated herein by reference. |
| (2) | Incorporated by reference to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 1999, and incorporated herein by reference. |
| (3) | Incorporated by reference to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 2006, and incorporated herein by reference. |
| (4) | Filed as an exhibit to the Registrant’s Registration Statement on Form F-4 filed on May 7, 2009 and incorporated herein by reference. |
| (5) | Filed as an exhibit to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 2007, and incorporated herein by reference. |
| (6) | Filed as an exhibit to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 2010, and incorporated herein by reference. |
| (7) | Filed as an exhibit to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 2012, and incorporated herein by reference. |
| (8) | Filed as an exhibit to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 2013, and incorporated herein by reference. |
Filed as an exhibit to the Registrant’s Annual Report on Form 20-F for the year ended December 31, 2014, and incorporated herein by reference. |
SIGNATURES
The registrant hereby certifies that it meets all of the requirements for filing on Form 20-F and that it has duly caused and authorized the undersigned to sign this annual report on its behalf.
TAT TECHNOLOGIES LTD. | |||
| By: | /s/ | ||
Chief Financial Officer (Principal Accounting Officer) | |||
| Date: March 14, 2022 | |||
TAT TECHNOLOGIES LTD.
CONSOLIDATED FINANCIAL STATEMENTS
AS OF DECEMBER 31, 2015
2021
INDEX
(PCAOB ID: Number 1309)
F-4 - F-5 | |
F-6 - F-7 | |
F-8 | |
F-9 | |
F-10 - F-11 | |
F-12 - F-56 |
Report of Independent Registered Public Accounting Firm
To the shareholdersBoard of
Directors and Shareholders of
TAT Technologies Ltd.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of TAT Technologies Ltd. and its subsidiaries (the "Company") as of December 31, 20152021 and 2014,2020, and the related consolidated statements of operations, of comprehensive income (loss), of changes in shareholders' equity and of cash flows for each of the three years in the period ended December 31, 2015. 2021, including the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021 in conformity with accounting principles generally accepted in the United States of America.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company’s Board of Directors and management. Our responsibility is to express an opinion on thesethe Company's consolidated financial statements based on our audits. We did not auditare a public accounting firm registered with the financial statements of First Aviation Services Inc., an equity method investee through March 2015, as of December 31, 2014Public Company Accounting Oversight Board (United States) (PCAOB) and for the years ended December 31, 2014 and 2013. The First Aviation Services Inc. financial statements audited by other auditors were prepared on a "historical" basis (priorare required to basis adjustments primarily relatedbe independent with respect to impairment charges recorded by the Company) and reflect total net assets of $8,935,000 as of December 31, 2014 and total net income of $727,000 and $3,158,000 for the years ended December 31, 2014 and 2013 , respectively (subsequently adjusted by the Company to net assets of $2,556,000in accordance with the U.S. federal securities laws and net income of $267,000,the applicable rules and $1,025,000 respectively, to reflect the share in the results of First Aviation Services Inc. and other adjustments primarily related to impairment charges recorded by the Company). We audited the adjustments necessary to convert the “historical” basis financial statements of First Aviation Services Inc. to the basis reflected in the Company’s consolidated financial statements. The First Aviation Services Inc. financial statements were audited by other auditors (whose report thereon dated March 4, 2015 expressed an unqualified opinion on those financial statements) has been furnished to us, and our opinion expressed herein, insofar as it relates to the historical amounts included for First Aviation Services Inc., is based solely on the reportregulations of the other auditors.
Securities and Exchange Commission and the PCAOB.
In our opinion, based on our audits andAs discussed in Note 14 to the consolidated financial statements, the Company's consolidated inventory balance was $41,003 thousand as of December 31, 2021. The Company changedwrites down its inventory for estimated obsolescence and unmarketable inventory equal to the mannerdifference between the cost of inventory and net realizable value based upon assumptions for future demand and market conditions. Changes in which it accountsthese assumptions could have a significant impact on the inventory's valuation.
inventory items; (iv) evaluating the accuracy of the impairment by selecting a sample of inventory items and evaluating supporting documentation regarding current and historical sales patterns; (v) assessing whether management's assumptions related to future demand and market conditions were consistent with evidence obtained in other areas of the audit.
F - 2
We conducted our audits of these consolidated financial statements in accordance with the standards of the Public Company Accounting Oversight Board (United States).PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. Anmisstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit includesof its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.
Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence supportingregarding the amounts and disclosures in the consolidated financial statements. An auditOur audits also includes assessingincluded evaluating the accounting principles used and significant estimates made by the Company’s Board of Directors and management, as well as evaluating the overall presentation of the consolidated financial statements presentation.statements. We believe that our audits provide a reasonable basis for our opinion.
F - 2
Critical Audit Matters
The critical audit matter communicated below is a matter arising from the reportcurrent period audit of other auditors, the consolidated financial statements referredthat was communicated or required to above present fairly,be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to the consolidated financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in all material respects,any way our opinion on the consolidated financial positionstatements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
Inventory - Write down of TAT Technologies Ltd.obsolete and its subsidiaries at December 31, 2015unmarketable inventory
As described in Notes 2 and 2014 and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2015 in conformity with accounting principles generally accepted in the United States of America.
The principal considerations for our determination that performing procedures relating to the classificationwrite down of deferred taxesobsolete and unmarketable inventory is a critical audit matter are the significant judgement by management when determining the assumptions relating to the future demand, market conditions, and sales forecasts. This in turn led to a high degree of auditor judgement, subjectivity and effort in performing procedures and evaluating management’s significant assumptions related to future demand and market conditions.
Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated balance sheets duefinancial statements. These procedures included, among others: (i) utilizing historical inventory usage data to analyze the adoptionrelationship between the inventory impairment calculated, the inventory on hand, and the sales over time; (ii) evaluating management’s ability to accurately estimate future demand by comparing actual inventory usage to estimates made in prior years; (iii) comparison of ASU 2015-17, Balance Sheet Classificationmanagement’s assumptions related to market conditions to available external market data for a sample of Deferred Taxes.
Tel-Aviv, Israel | /s/ Kesselman & Kesselman |
March 14, 2022 | Certified Public Accountants (lsr.) |
A member firm of PricewaterhouseCoopers International Limited |
We have served as the Company's auditor since 2009.
F - 3
TAT TECHNOLOGIES LTD. |
CONSOLIDATED BALANCE SHEETS |
U.S. dollars in thousands |
December 31, | ||||||||
2021 | 2020 | |||||||
| ||||||||
ASSETS | ||||||||
| ||||||||
CURRENT ASSETS: | ||||||||
Cash and cash equivalents | $ | 12,872 | $ | 24,128 | ||||
Accounts receivable, net of allowance for credit losses of $389 and $306 thousands as of December 31, 2021 and December 31, 2020 respectively | 13,887 | 11,355 | ||||||
Inventory, net | 41,003 | 41,223 | ||||||
Other current assets and prepaid expenses | 4,219 | 2,737 | ||||||
| ||||||||
Total current assets | 71,981 | 79,443 | ||||||
| ||||||||
NON-CURRENT ASSETS: | ||||||||
Restricted deposit | 343 | 176 | ||||||
Investment in affiliates | 695 | 771 | ||||||
Funds in respect of employee rights upon retirement | 1,157 | 1,186 | ||||||
Deferred income taxes | 1,252 | 566 | ||||||
Property, plant and equipment, net | 30,462 | 25,737 | ||||||
Operating lease right of use assets | 3,114 | 6,767 | ||||||
Intangible assets, net | 1,829 | 1,475 | ||||||
| ||||||||
Total non-current assets | 38,852 | 36,678 | ||||||
| ||||||||
Total assets | $ | 110,833 | $ | 116,121 | ||||
December 31, | ||||||||
2015 | 2014 | |||||||
| (Revised) | ||||||||
| ASSETS | ||||||||
| CURRENT ASSETS: | ||||||||
| Cash and cash equivalents | $ | 18,688 | $ | 22,894 | ||||
| Short-term bank deposits | 8,122 | 5,089 | ||||||
| Accounts receivable, net | 19,151 | 15,657 | ||||||
| Other current assets and prepaid expenses | 3,025 | 2,604 | ||||||
| Inventory, net | 36,664 | 35,477 | ||||||
| Total current assets | 85,650 | 81,721 | ||||||
| NON-CURRENT ASSETS: | ||||||||
| Investment in First Aviation Services Inc. | 169 | 2,556 | ||||||
| Funds in respect of employee rights upon retirement | 2,626 | 2,496 | ||||||
| Deferred income taxes | 890 | 879 | ||||||
| Intangible assets, net | 1,314 | - | ||||||
| Property, plant and equipment, net | 18,934 | 11,524 | ||||||
| Total non-current assets | 23,933 | 17,455 | ||||||
| Total assets | $ | 109,583 | $ | 99,176 | ||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 34
TAT TECHNOLOGIES LTD. |
CONSOLIDATED BALANCE SHEETS |
U.S. dollars in thousands, except share data |
December 31, | ||||||||
2021 | 2020 | |||||||
| ||||||||
LIABILITIES AND EQUITY | ||||||||
| ||||||||
CURRENT LIABILITIES: | ||||||||
Current maturities of long-term loans | $ | 691 | $ | 1,477 | ||||
Credit line from bank | 6,008 | 3,000 | ||||||
Accounts payable | 9,093 | 12,222 | ||||||
Accrued expenses | 6,959 | 6,691 | ||||||
Operating lease liabilities | 1,169 | 1,614 | ||||||
Provision for restructuring plan | 657 | 0- | ||||||
Liabilities belong to discontinued operation | 0- | 179 | ||||||
| ||||||||
Total current liabilities | 24,577 | 25,183 | ||||||
| ||||||||
NON-CURRENT LIABILITIES: | ||||||||
Long-term loans | 5,979 | 3,489 | ||||||
Liability in respect of employee rights upon retirement | 1,504 | 1,410 | ||||||
Operating lease liabilities | 1,989 | 5,758 | ||||||
| ||||||||
Total non-current liabilities | 9,472 | 10,657 | ||||||
| ||||||||
COMMITMENTS AND CONTINGENCIES (NOTE 15) | ||||||||
| ||||||||
Total liabilities | 34,049 | 35,840 | ||||||
| ||||||||
EQUITY: | ||||||||
Ordinary shares of NIS 0.9 par value: Authorized: 13,000,000 shares at December 31, 2021 and at December 31, 2020; Issued: 9,149,169 shares at December 31, 2021 and at December 31, 2020; Outstanding: 8,874,696 shares at December 31, 2021 and at December 31, 2020 | 2,809 | 2,809 | ||||||
Additional paid-in capital | 65,871 | 65,711 | ||||||
Treasury shares, at cost, 274,473 shares at December 31, 2021 and 2020 | (2,088 | ) | (2,088 | ) | ||||
Accumulated other comprehensive income | 33 | 128 | ||||||
Retained earnings | 10,159 | 13,721 | ||||||
Total shareholders' equity | 76,784 | 80,281 | ||||||
| ||||||||
Total liabilities and shareholders' equity | $ | 110,833 | $ | 116,121 | ||||
| December 31, | ||||||||
| 2015 | 2014 | |||||||
| (Revised) | ||||||||
| LIABILITIES AND EQUITY | ||||||||
| CURRENT LIABILITIES: | ||||||||
| Accounts payable | $ | 7,022 | $ | 5,886 | ||||
| Accrued expenses | 7,815 | 5,060 | ||||||
| Total current liabilities | 14,837 | 10,946 | ||||||
| NON CURRENT LIABILITIES: | ||||||||
| Other long-term liabilities | 189 | 34 | ||||||
| Liability in respect of employee rights upon retirement | 2,871 | 2,655 | ||||||
| Deferred income taxes | 262 | - | ||||||
| Total non-current liabilities | 3,322 | 2,689 | ||||||
| COMMITMENTS AND CONTINGENT LIABILITIES (NOTE 12) | ||||||||
| Total liabilities | 18,159 | 13,635 | ||||||
| EQUITY: | ||||||||
Ordinary shares of NIS 0.9 par value : Authorized: 10,000,000 shares at December 31, 2015 and 2014; Issued: 9,082,817 shares at December 31, 2015 and 2014; Outstanding: 8,808,344 shares at December 31, 2015 and 2014 | 2,793 | 2,793 | ||||||
| Additional paid-in capital | 64,529 | 64,491 | ||||||
| Treasury shares, at cost, 274,473 shares at December 31, 2015 and 2014 | (2,088 | ) | (2,088 | ) | ||||
| Accumulated other comprehensive loss | (4 | ) | - | |||||
| Retained earnings | 26,194 | 20,345 | ||||||
| Total shareholders' equity | 91,424 | 85,541 | ||||||
| Total liabilities and shareholders' equity | $ | 109,583 | $ | 99,176 | ||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 45
TAT TECHNOLOGIES LTD. |
CONSOLIDATED STATEMENTS OF OPERATIONS |
U.S. dollars in thousands |
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Revenue: | ||||||||||||
Products | $ | 25,870 | $ | 22,739 | $ | 25,019 | ||||||
Services | 52,103 | 52,620 | 72,460 | |||||||||
77,973 | 75,359 | 97,479 | ||||||||||
| ||||||||||||
Cost of revenue: | ||||||||||||
Products | 23,761 | 20,751 | 21,557 | |||||||||
Services | 42,942 | 46,173 | 60,622 | |||||||||
66,703 | 66,924 | 82,179 | ||||||||||
| ||||||||||||
Gross profit | 11,270 | 8,435 | 15,300 | |||||||||
| ||||||||||||
Operating expenses: | ||||||||||||
Research and development, net | 517 | 185 | 113 | |||||||||
Selling and marketing | 5,147 | 4,369 | 4,929 | |||||||||
General and administrative | 8,354 | 7,612 | 7,654 | |||||||||
Other (income) expenses | (468 | ) | 315 | 0- | ||||||||
Restructuring expenses, net | 1,755 | 0- | 0- | |||||||||
| ||||||||||||
15,305 | 12,481 | 12,696 | ||||||||||
| ||||||||||||
Operating income (loss) | (4,035 | ) | (4,046 | ) | 2,604 | |||||||
| ||||||||||||
Financial expenses | (683 | ) | (999 | ) | (1,270 | ) | ||||||
Financial income | 143 | 229 | 848 | |||||||||
| ||||||||||||
Income (loss) before taxes on income (tax benefit) | (4,575 | ) | (4,816 | ) | 2,182 | |||||||
| ||||||||||||
Taxes on income (tax benefit) | (662 | ) | (1,517 | ) | 589 | |||||||
| ||||||||||||
Income (loss) before share of equity investment | (3,913 | ) | (3,299 | ) | 1,593 | |||||||
| ||||||||||||
Share in results of equity investment of affiliated companies | (76 | ) | (185 | ) | (132 | ) | ||||||
| ||||||||||||
Net income (loss) from continued operation | $ | (3,989 | ) | $ | (3,484 | ) | $ | 1,461 | ||||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
| (Revised) | (Revised) | |||||||||||
| Revenue: | ||||||||||||
| Products | $ | 31,339 | $ | 31,363 | $ | 34,364 | ||||||
| Services | 54,268 | 49,363 | 45,187 | |||||||||
| 85,607 | 80,726 | 79,551 | ||||||||||
| Cost of revenue: | �� | |||||||||||
| Products | 24,466 | 23,616 | 25,143 | |||||||||
| Services | 47,476 | 40,906 | 36,600 | |||||||||
| 71,942 | 64,522 | 61,743 | ||||||||||
| Gross profit | 13,665 | 16,204 | 17,808 | |||||||||
| Operating expenses: | ||||||||||||
| Research and development, net | 890 | 1,070 | 713 | |||||||||
| Selling and marketing | 2,903 | 3,203 | 3,150 | |||||||||
| General and administrative | 8,469 | 8,123 | 8,668 | |||||||||
| Other expenses (income) | 631 | (11 | ) | (20 | ) | |||||||
Gain on bargain purchase | (4,833 | ) | - | - | ||||||||
| 8,060 | 12,385 | 12,511 | ||||||||||
| Operating income | 5,605 | 3,819 | 5,297 | |||||||||
| Financial expenses | (1,262 | ) | (2,510 | ) | (947 | ) | ||||||
| Financial income | 913 | 1,216 | 897 | |||||||||
| Income from continuing operations before taxes on income | 5,256 | 2,525 | 5,247 | |||||||||
| Taxes on income | 644 | 1,360 | 1,041 | |||||||||
| Income from continuing operations before equity investment | 4,612 | 1,165 | 4,206 | |||||||||
| Share in results of equity investment of affiliated company | 1,237 | 267 | 1,025 | |||||||||
| Net income from continuing operations | 5,849 | 1,432 | 5,231 | |||||||||
| Net loss from discontinued operations, net of tax | - | - | (2,429 | ) | ||||||||
| Net income attributable to TAT Technologies Ltd. shareholders | $ | 5,849 | $ | 1,432 | $ | 2,802 | ||||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 56
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
CONSOLIDATED STATEMENTS OF OPERATIONS |
U.S. dollars in thousands, except share and per share data |
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
| ||||||||||||
Net income (loss) from discontinued operation | $ | 427 | $ | (1,845 | ) | $ | (655 | ) | ||||
Net income (loss) | $ | (3,562 | ) | $ | (5,329 | ) | $ | 806 | ||||
| ||||||||||||
Net income (loss) per share basic and diluted from continued operation | $ | (0.45 | ) | $ | (0.39 | ) | $ | 0.17 | ||||
Net income (loss) per share basic and diluted from discontinued operation | $ | 0.05 | $ | (0.21 | ) | $ | (0.07 | ) | ||||
Net income (loss) per share basic and diluted | $ | (0.4 | ) | $ | (0.6 | ) | $ | 0.1 | ||||
| ||||||||||||
Weighted average number of shares outstanding: | ||||||||||||
Basic and diluted | 8,874,696 | 8,874,696 | 8,874,696 | |||||||||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
| (Revised) | (Revised) | |||||||||||
| Basic and diluted income per share: | ||||||||||||
| Net income from continuing operations per share attributable to controlling interest | $ | 0.66 | $ | 0.16 | $ | 0.60 | ||||||
| Loss from discontinued operations per share attributable to controlling interest | - | - | (0.28 | ) | ||||||||
| $ | 0.66 | $ | 0.16 | $ | 0.32 | |||||||
| Weighted average number of shares outstanding: | ||||||||||||
| Basic | 8,808,344 | 8,805,495 | 8,799,237 | |||||||||
| Diluted | 8,810,689 | 8,826,542 | 8,808,920 | |||||||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 67
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS) |
U.S. dollars in thousands |
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Net income (loss) | $ | (3,562 | ) | $ | (5,329 | ) | $ | 806 | ||||
Other comprehensive income (loss), net | ||||||||||||
Net unrealized gains (losses) from derivatives | (76 | ) | 232 | 372 | ||||||||
Reclassification adjustments for gains from derivatives included in net income | (19 | ) | (130 | ) | (140 | ) | ||||||
Total other comprehensive income (loss) | $ | (95 | ) | $ | 102 | $ | 232 | |||||
| ||||||||||||
Total comprehensive income (loss) | $ | (3,657 | ) | $ | (5,227 | ) | $ | 1,038 | ||||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
| (Revised) | (Revised) | |||||||||||
| Net income | $ | 5,849 | $ | 1,432 | $ | 1,760 | ||||||
| Other comprehensive income, net | ||||||||||||
| Currency translation adjustments | - | 429 | 668 | |||||||||
| Net unrealized losses from derivatives | (5 | ) | - | - | ||||||||
| Reclassification adjustments for gains included in net income | 1 | - | - | |||||||||
| Total other comprehensive income | (4 | ) | 429 | 668 | ||||||||
| Total comprehensive income | $ | 5,845 | $ | 1,861 | $ | 2,428 | ||||||
| Comprehensive loss attributable to non-controlling interest | - | - | 842 | |||||||||
| Comprehensive income attributable to shareholders | $ | 5,845 | $ | 1,861 | $ | 3,270 | ||||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 78
Share capital | Accumulated | |||||||||||||||||||||||||||||||
Number of shares issued | Amount | Additional paid-in capital | other comprehensive income (loss) | Treasury shares | Retained earnings (revised) | Non-controlling interest | Total equity (revised) | |||||||||||||||||||||||||
| BALANCE AT DECEMBER 31, 2012 | 9,073,043 | $ | 2,790 | $ | 64,410 | $ | (897 | ) | $ | (2,088 | ) | $ | 18,111 | $ | 2,803 | $ | 85,129 | |||||||||||||||
CHANGES DURING THE YEAR ENDED DECEMBER 31, 2013: | ||||||||||||||||||||||||||||||||
| Comprehensive income (loss) | - | - | - | 468 | - | 2,802 | (842 | ) | 2,428 | |||||||||||||||||||||||
| Share based compensation | - | - | 3 | - | - | - | - | 3 | ||||||||||||||||||||||||
| Exercise of options | 6,666 | 2 | 41 | - | - | - | - | 43 | ||||||||||||||||||||||||
| BALANCE AT DECEMBER 31, 2013 | 9,079,709 | $ | 2,792 | $ | 64,454 | $ | (429 | ) | $ | (2,088 | ) | $ | 20,913 | $ | 1,961 | $ | 87,603 | |||||||||||||||
CHANGES DURING THE YEAR ENDED DECEMBER 31, 2014: | ||||||||||||||||||||||||||||||||
| Comprehensive income | - | - | - | 429 | - | 1,432 | - | 1,861 | ||||||||||||||||||||||||
| Share based compensation | - | - | 38 | - | - | - | - | 38 | ||||||||||||||||||||||||
| Exercise of option | 3,108 | 1 | (1 | ) | - | - | - | - | - | |||||||||||||||||||||||
| Dividend distributed | - | - | - | - | - | (2,000 | ) | - | (2,000 | ) | ||||||||||||||||||||||
| Sale of subsidiary | - | - | - | - | - | - | (1,961 | ) | (1,961 | ) | ||||||||||||||||||||||
| BALANCE AT DECEMBER 31, 2014 | 9,082,817 | $ | 2,793 | $ | 64,491 | $ | - | $ | (2,088 | ) | $ | 20,345 | $ | - | $ | 85,541 | ||||||||||||||||
CHANGES DURING THE YEAR ENDED DECEMBER 31, 2015: | ||||||||||||||||||||||||||||||||
| Comprehensive income (loss) | - | - | - | (4 | ) | - | 5,849 | - | 5,845 | |||||||||||||||||||||||
| Share based compensation | - | - | 38 | - | - | - | - | 38 | ||||||||||||||||||||||||
| BALANCE AT DECEMBER 31, 2015 | 9,082,817 | $ | 2,793 | $ | 64,529 | $ | (4 | ) | $ | (2,088 | ) | $ | 26,194 | - | $ | 91,424 | ||||||||||||||||
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS EQUITY |
U.S. dollars in thousands, except share data |
Ordinary shares | Accumulated | |||||||||||||||||||||||||||
Number of shares issued | Amount | Additional paid-in capital | other comprehensive income (loss) | Treasury shares | Retained earnings | Total equity | ||||||||||||||||||||||
| ||||||||||||||||||||||||||||
BALANCE AT DECEMBER 31, 2018 | 9,122,501 | $ | 2,809 | $ | 65,535 | $ | (206 | ) | $ | (2,088 | ) | $ | 18,244 | $ | 84,294 | |||||||||||||
CHANGES DURING THE YEAR ENDED DECEMBER 31, 2019: | ||||||||||||||||||||||||||||
Comprehensive income | - | - | - | 232 | - | 806 | 1,038 | |||||||||||||||||||||
Share based compensation | - | - | 38 | - | - | - | 38 | |||||||||||||||||||||
BALANCE AT DECEMBER 31, 2019 | 9,149,169 | $ | 2,809 | $ | 65,573 | $ | 26 | $ | (2,088 | ) | $ | 19,050 | $ | 85,370 | ||||||||||||||
CHANGES DURING THE YEAR ENDED DECEMBER 31, 2020: | ||||||||||||||||||||||||||||
Comprehensive income (loss) | - | - | - | 102 | - | (5,329 | ) | (5,227 | ) | |||||||||||||||||||
Share based compensation | - | - | 138 | - | - | - | 138 | |||||||||||||||||||||
BALANCE AT DECEMBER 31, 2020 | 9,149,169 | $ | 2,809 | $ | 65,711 | $ | 128 | $ | (2,088 | ) | 13,721 | $ | 80,281 | |||||||||||||||
CHANGES DURING THE YEAR ENDED DECEMBER 31, 2021: | ||||||||||||||||||||||||||||
Comprehensive loss | - | - | - | (95 | ) | - | (3,562 | ) | (3,657 | ) | ||||||||||||||||||
Share based compensation | - | - | 160 | - | - | - | 160 | |||||||||||||||||||||
BALANCE AT DECEMBER 31, 2021 | 9,149,169 | $ | 2,809 | $ | 65,871 | $ | 33 | $ | (2,088 | ) | 10,159 | $ | 76,784 | |||||||||||||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 89
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
CONSOLIDATED STATEMENTS OF CASH FLOWS |
U.S. dollars in thousands |
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
| ||||||||||||
CASH FLOWS FROM OPERATING ACTIVITIES: | ||||||||||||
Net income (loss) from continued operations | $ | (3,989 | ) | $ | (3,484 | ) | $ | 1,461 | ||||
| ||||||||||||
Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities: | ||||||||||||
Depreciation and amortization | 4,881 | 4,065 | 4,292 | |||||||||
Gain from change in fair value of derivatives | (19 | ) | (34 | ) | (311 | ) | ||||||
Non cash finance expense | (73 | ) | 566 | 354 | ||||||||
Lease modification | (1,315 | ) | 0- | 0- | ||||||||
Provision for restructuring expenses (see note 9) | 657 | 0- | 0- | |||||||||
Change in provision for doubtful accounts | 248 | (8 | ) | 38 | ||||||||
Share in results of affiliated companies | 76 | 185 | 132 | |||||||||
Share based compensation | 160 | 138 | 38 | |||||||||
Liability in respect of employee rights upon retirement | 94 | (341 | ) | (897 | ) | |||||||
Impairment of intangible assets | 0- | 298 | 0- | |||||||||
Impairment of fixed assets | 1,820 | 0- | 0- | |||||||||
Capital gain from sale of fixed assets | (468 | ) | 0- | 0- | ||||||||
Deferred income taxes, net | (686 | ) | (1,438 | ) | (450 | ) | ||||||
Government loan forgiveness | (1,442 | ) | 0- | 0- | ||||||||
Changes in operating assets and liabilities: | ||||||||||||
Decrease (increase) in trade accounts receivable | (2,934 | ) | 9,472 | (2,037 | ) | |||||||
Decrease (increase) in other current assets and prepaid expenses | (959 | ) | 310 | 2,500 | ||||||||
Decrease (increase) in inventory | (681 | ) | 1,868 | (5,740 | ) | |||||||
Increase (decrease) in trade accounts payable | 2,571 | (5,336 | ) | 3,349 | ||||||||
Increase (decrease) in accrued expenses | (218 | ) | (252 | ) | 982 | |||||||
Increase (decrease) in other long-term liabilities | 8 | (62 | ) | (118 | ) | |||||||
Net cash provided by (used in) operating activities from continued operation | $ | (2,269 | ) | $ | 5,947 | $ | 3,593 | |||||
| ||||||||||||
CASH FLOWS FROM INVESTING ACTIVITIES: | ||||||||||||
Investment in affiliated company | 0- | 0- | (10 | ) | ||||||||
Proceeds from sale of property and equipment | 1,163 | 0- | 0- | |||||||||
Purchase of property and equipment | (16,247 | ) | (3,894 | ) | (3,269 | ) | ||||||
Purchase of intangible assets | (555 | ) | (1,513 | ) | 0- | |||||||
Net cash used in continued investing activities | $ | (15,639 | ) | $ | (5,407 | ) | $ | (3,279 | ) | |||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
| CASH FLOWS FROM OPERATING ACTIVITIES: | ||||||||||||
Net income attributable to TAT Technologies Ltd. shareholders | $ | 5,849 | $ | 1,432 | $ | 2,802 | ||||||
| Net loss from discontinued operations | - | - | 2,429 | |||||||||
| Income from continuing operations | 5,849 | 1,432 | 5,231 | |||||||||
| Adjustments to reconcile net income to net cash provided by (used in) operating activities: | ||||||||||||
| Depreciation and amortization | 2,781 | 2,069 | 1,859 | |||||||||
| Exchange differentials of loans | - | (1 | ) | 23 | ||||||||
| Write down of inventory | - | - | 67 | |||||||||
| Gain (loss) on sale of property, plant and equipment | - | 10 | (20 | ) | ||||||||
| Gain from change in fair value of derivatives | 10 | - | (27 | ) | ||||||||
| Interest from short-term bank deposits and restricted deposits | (33 | ) | (128 | ) | (11 | ) | ||||||
| Provision for doubtful accounts | 206 | - | 17 | |||||||||
| Share in results and sale of equity investment of affiliated company | (1,237 | ) | (267 | ) | (1,025 | ) | ||||||
| Share based compensation | 38 | 38 | 3 | |||||||||
| Gain on bargain purchase | (4,833 | ) | - | - | ||||||||
| Liability in respect of employee rights upon retirement | 28 | (485 | ) | 286 | ||||||||
| Deferred income taxes, net | (21 | ) | 1,229 | 71 | ||||||||
| Changes in operating assets and liabilities: | ||||||||||||
| Amounts due to (from) related parties, net | - | 5 | (63 | ) | ||||||||
| Decrease (increase) in trade accounts receivable | (2,375 | ) | 2,730 | (1,001 | ) | |||||||
| Decrease (increase) in other current assets and prepaid expenses | (85 | ) | (833 | ) | 1,195 | |||||||
| Decrease (increase) in inventory | (571 | ) | (6,009 | ) | 679 | |||||||
| Increase (decrease) in trade accounts payable | 436 | (509 | ) | 278 | ||||||||
| Increase (decrease) in accrued expenses | 525 | (715 | ) | (417 | ) | |||||||
| Increase (decrease) in other long-term liabilities | 15 | (24 | ) | 58 | ||||||||
| Net cash provided by (used in) operating activities | 733 | (1,458 | ) | 7,203 | ||||||||
| CASH FLOWS FROM INVESTING ACTIVITIES: | ||||||||||||
| Proceeds from sale of subsidiary (A) | - | 2,176 | - | |||||||||
| Acquisitions of subsidiary, net of cash acquired in the amount of $1,164 (see note 3a) | (1,796 | ) | - | - | ||||||||
| Proceeds from sale of equity investment of affiliated company | 3,624 | - | - | |||||||||
| Funds in respect of employee rights upon retirement | 8 | 352 | (48 | ) | ||||||||
| Proceeds from sale of property and equipment | 9 | 19 | 51 | |||||||||
| Purchase of property and equipment | (3,315 | ) | (3,021 | ) | (2,240 | ) | ||||||
| Investment in short-term deposit | (8,109 | ) | - | - | ||||||||
| Maturities of short-term deposits | 5,109 | 5,098 | - | |||||||||
| Proceeds released from restricted deposits | - | - | 2,307 | |||||||||
| Net cash provided by (used in) investing activities | $ | (4,470 | ) | $ | 4,624 | $ | 70 | |||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 910
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
CONSOLIDATED STATEMENTS OF CASH FLOWS |
U.S. dollars in thousands |
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
CASH FLOWS FROM FINANCING ACTIVITIES: | ||||||||||||
Short-term credit received from banks | 3,000 | 3,960 | 0- | |||||||||
Proceeds from long-term loans received | 3,042 | 3,692 | ||||||||||
Net cash provided by continued financing activities | $ | 6,042 | $ | 7,652 | 0- | |||||||
| ||||||||||||
CASH FLOWS FROM DISCONTINUED ACTIVITIES: | ||||||||||||
Net cash provided by operating activities | 777 | 153 | (171 | ) | ||||||||
Net cash used in investing activities | 0- | 0- | (134 | ) | ||||||||
Net cash provided by (used in) discontinued activities | $ | 777 | $ | 153 | $ | (305 | ) | |||||
| ||||||||||||
NET INCREASE (DECREASE) IN CASH AND CASH EQUIVALENTS AND RESTRICTED CASH | (11,089 | ) | 8,345 | 9 | ||||||||
CASH AND CASH EQUIVALENTS AND RESTRICTED CASH AT BEGINNING OF YEAR | 24,304 | 15,959 | 15,950 | |||||||||
CASH AND CASH EQUIVALENTS AND RESTRICTED CASH AT END OF YEAR | 13,215 | 24,304 | 15,959 | |||||||||
| ||||||||||||
SUPPLEMENTARY INFORMATION ON INVESTING ACTIVITIES NOT INVOLVING CASH FLOW: | ||||||||||||
Purchase of property, plant and equipment on credit | $ | 199 | $ | 6,575 | $ | 942 | ||||||
Additions of operating lease right-of-use assets and operating lease liabilities | $ | 399 | $ | 1,756 | $ | 648 | ||||||
Classification inventory to fixed assets | $ | 829 | 0- | 0- | ||||||||
| ||||||||||||
Supplemental disclosure of cash flow information: | ||||||||||||
Interest paid | $ | (251 | ) | $ | (3 | ) | $ | (28 | ) | |||
Income taxes received (paid), net | $ | 0- | $ | (3 | ) | $ | 673 | |||||
| Year ended December 31, | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| CASH FLOWS FROM FINANCING ACTIVITIES: | ||||||||||||
| Repayments of long-term loans | - | $ | (883 | ) | $ | (2,286 | ) | |||||
| Dividend paid | - | (2,000 | ) | - | ||||||||
| Repayments of short-term loans | (469 | ) | (26 | ) | (719 | ) | ||||||
| Short-term credit received from a bank | - | - | 26 | |||||||||
| Exercise of options | - | - | 43 | |||||||||
| Net cash used in financing activities | (469 | ) | (2,909 | ) | (2,936 | ) | ||||||
| CASH FLOWS FROM DISCONTINUED OPERATIONS: | ||||||||||||
| Cash provided by operating activities of discontinued operations | - | - | 685 | |||||||||
| Cash provided by investing activities of discontinued operations | - | - | (31 | ) | ||||||||
| Cash used in financing activities of discontinued operations | - | - | (304 | ) | ||||||||
| Effect of exchange rate changes on cash and cash equivalents of discontinued operations | - | - | 164 | |||||||||
| Net cash provided by discontinued operations | - | - | 514 | |||||||||
| NET INCREASE (DECREASE) IN CASH AND CASH EQUIVALENTS | (4,206 | ) | 257 | 4,851 | ||||||||
| CASH AND CASH EQUIVALENTS AT BEGINNING OF YEAR | 22,894 | 22,637 | 17,786 | |||||||||
| CASH AND CASH EQUIVALENTS AT END OF YEAR | 18,688 | 22,894 | 22,637 | |||||||||
| LESS – CASH AND CASH EQUIVALENT OF DISCONTINUED OPERATIONS AT END OF YEAR | - | - | 2,823 | |||||||||
| CASH AND CASH EQUIVALENTS OF CONTINUING OPERATIONS AT END OF YEAR | $ | 18,688 | $ | 22,894 | $ | 19,814 | ||||||
| SUPPLEMENTARY INFORMATION ON INVESTING ACTIVITIES NOT INVOLVING CASH FLOW: | ||||||||||||
| Purchase of property, plant and equipment on credit | $ | 76 | $ | 44 | $ | 590 | ||||||
| Supplemental disclosure of cash flow information: | ||||||||||||
| Interest paid | $ | (4 | ) | $ | (15 | ) | $ | (89 | ) | |||
| Income taxes paid | $ | (1,321 | ) | $ | (571 | ) | $ | (961 | ) | |||
| Income taxes refunds | $ | 613 | $ | 613 | $ | 1,383 | ||||||
(A) Proceeds from sale of subsidiary | ||||||||||||
| Assets held for sale (excluding cash in the amount of $2,823) | - | 7,136 | - | |||||||||
| Liabilities held for sale | - | (3,428 | ) | - | ||||||||
| Non-controlling interest | - | (1,532 | ) | - | ||||||||
| $ | - | $ | 2,176 | $ | - | |||||||
The accompanying notes are an integral part of the consolidated financial statements.
F - 1011
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | |
U.S. dollars in thousands |
NOTE 1 -GENERAL
a.TAT Technologies Ltd., (“TAT” or the “Company”) an Israeli corporation, incorporated in 1985, is a leading provider of servicessolutions and productsservices to the aerospace and defense industries, focused mainly on the following four segments: (i) original equipment manufacturing (“OEM”) of heat transfer solutions and aviation accessories mainly through our Gedera facility and our Limco subsidiary; (ii) MRO (“Maintenance Repair and Overhaul”) services for heat transfer components and OEM of heat transfer solutions through Limco Airepair Inc our wholly-owned subsidiary; (iii) MRO services for aviation components (mainly Auxiliary Power Unit “APU” and Landing Gear “LG”) through Piedmont Aviation Component Services LLC our wholly-owned subsidiary; and (iv) overhaul and coating of jet engine components through Turbochrome our wholly-owned subsidiary. TAT targets the commercial aerospace (serving a wide range of types and sizes of commercial and business jets), military aerospace and ground defense industries.sectors. TAT’s shares are listed on both the NASDAQ (TATT) and Tel-Aviv Stock Exchange.
In June 2020, the Company's management decided to discontinue the JT8D engine blades reconditioning activity which belong to “overhaul and coating of jet engine components” segment as part of a strategic change, see note 18.
In March 2021, the Company announced on restructuring plan which include transfer the transfer of the company's activity of “OEM of heat transfer solutions and aviation accessories” to our activity of “MRO services for heat transfer components and OEM of heat transfer solutions” in Tulsa, Oklahoma and to our “overhaul and coating of jet engine components” activity in Kiryat Gat, see note 9.
The ongoing COVID-19 pandemic outbreak continued to have an adverse effect in 2021 on TAT’s industry and the markets in which TAT operates. The COVID-19 outbreak has significantly impacted the aviation market in which TAT’s customers operate and has resulted in a reduction of TAT’s business with some of these customers. As new variants of COVID-19 emerge, certain countries continue to place restrictions on businesses and travel. Global supply shortages emerged for certain products, developed, repaired,leading to delays in delivery schedule. We actively monitor and maintainedrespond to the changing conditions created by the Group are primarily used for airborne systemspandemic, with focus on commercialprioritizing the health and military aircraftssafety of our employees, dedicating resources to support our communities, and innovating to address our customers’ needs. In order to mitigate the impact of the decline in business as a result of the pandemic, TAT implemented measures to reduce its expenses, including a reduction in its headcount as well as other cost savings measures. The company's submitted and received government grants as part of the government support in business that affected from the Covid-19 pandemic. TAT remains cautious as new variants of the virus emerge and many factors remain unpredictable. Given the uncertainties regarding the continued impact of COVID-19 on TAT’s business, there can be no assurance that TAT’s estimates and assumptions used in the measurement of various assets and liabilities in the financial statements will prove to be accurate predictions of the future.
b.TAT has the following wholly owned subsidiaries: Limco-Piedmont Inc. (“Limco-Piedmont”), and Turbochrome Ltd. (“Turbochrome”). Additionally, the Company holds 51% of TAT-Engineering LLC (“TAT-Engineering”), hereinafter collectively referred to as the “Group”.
c.On November 25, 2015, the Company signed an agreement with Russian-based Engineering Holding of Moscow (“Engineering”), to establish a new facility for defense ground systems.
F - 1112
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES
a.Basis of Presentation
The Group's financial statements have been prepared in accordance with generally accepted accounting principles in the United States ("U.S. GAAP").
b.Use of estimates in the preparation of financial statement
The preparation of consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclose the nature of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting years. Actual results could differ from those estimates.
As applicable to these financial statements, the most significant estimates and assumptions relate to: recoverability of inventory, provision for doubtful accounts, purchase price allocation on acquisition,current expected credit loss and income taxes, impairment of long-lived assets, revenue recognition generated from long-term contracts and contingent consideration.taxes.
F - 13
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | ||
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | ||
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
c.Functional currency
The majority of the revenues of each subsidiary in the Group revenues are generated in U.S. dollars ("dollars") and a substantial portion of the costs of each subsidiary in the Group costs are incurred in dollars. In addition, a significant portion of the TAT and Turbochrome financing has been obtained in dollars. Accordingly, the dollar is the currency of the primary economic environment in which the Group operates and accordingly its functional and reporting currency is the dollar.
Transactions and balances originally denominated in dollars are presented at their original amounts. Balances in currencies other than the U.S. dollar are translated into dollars using historical and current exchange rates for non-monetary and monetary balances, respectively. For non-dollar transactions and other items in the statements of income (indicated below), the following exchange rates are used: (i) for transactions – exchange rates at transaction dates or average rates; and (ii) for other items (derived from non-monetary balance sheet items such as depreciation and amortization, etc.) – historical exchange rates. Currency transaction gains and losses are carried to financial income or expenses, as appropriate.
d.Principles of consolidation
The consolidated financial statements include the accounts of TAT and its subsidiaries.
Intercompany balances and transactions, including profits from intercompany sales not yet realized outside the Group, have been eliminated upon consolidation. Non-controlling interests are included in equity.
e.Cash and Cash equivalents
All highly liquid investments, which include short-term bank deposits, and money market accounts, that are not restricted as to withdrawal or use, and short-term debentures, the period to maturity of which do not exceed three months at the time of investment, are considered to be cash equivalents.
F - 14
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | ||
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | ||
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
f.Accounts receivable, net
The Group’s accounts receivable balances are due from customers primarily in the airline and defense industries. Credit is extended based on evaluation of a customer’s financial condition and generally, collateral is not required. Trade accounts receivable from sales of services and products are typically due from customers within 30 - 90 days. Trade accounts receivable balances are stated at amounts due from customers net of a provision for doubtful accounts.current expected losses. Accounts outstanding longer than their original contractual payment terms are considered past due.
The Group determines itsCompany’s accounts receivables accounting policy until December 31, 2019, prior to the adoption of the new CECL standard
Accounts receivables are stated at their net realizable value. The allowance against gross accounts receivables reflects the best estimate of losses inherent in the receivable’s portfolio determined based on historical experience, specific allowances for known troubled accounts and other currently available information. An allowance for doubtful debts is reflected in net accounts receivables. Account’s receivables are written off after all reasonable means to collect the full amount have been exhausted.
The Company’s accounts receivables accounting policy from January 1, 2020, following the adoption of the new CECL standard
Accounts receivable have been reduced by considering a numberan allowance for current expected losses. The Company maintains the allowance for estimated losses resulting from the inability of factors, including the lengthCompany’s customers to make required payments. The allowance represents the current estimate of timelifetime expected credit losses over the remaining duration of existing accounts receivable are past due, the Group’s previous loss history from such customers, the customer’sconsidering current ability to pay its obligation to TATmarket conditions and the conditionsupportable forecasts when appropriate. The estimate is a result of the general economyCompany’s ongoing evaluation of collectability, customer creditworthiness, historical levels of credit losses, and future expectations.
Write-off activity and recoveries for the industry as a whole. The Group writes-off accounts receivable when they become uncollectible. Payments subsequently received on such receivables are credited against earnings. The provision for doubtful accounts is determined with respect to specific debts that are doubtful of collection.
F - 1315
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
g.Inventory
Inventory is measured at the lower of cost or market.
and net realizable value.
Inventories include raw materials, parts, work in progress and finished products.
Cost of raw material and parts is determined using the “moving average” basis. Cost of work in progress and finished products is calculatingcalculated based on actual costscosts. Capitalized production costs components, mainly labor and overhead, is determineare determined on average basis over the production period.
If actual market prices are less favorable than those projected by management, inventory write-downs may be required. OnceWhen inventory written-down, a new lower cost basis for that inventory is established.
Since the Group sells products and services related to airplane accessories for airplanes that can be in service for 20 to 50 years, it must keep a supply of such products and parts on hand while the airplanes are in use. The Group writes down its inventory for estimated obsolescence and unmarketable inventory equal to the difference between the cost of inventory and estimated marketnet realizable value, which includes costs to sell based upon assumptions for future demand and market conditions.
F - 16
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | ||
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | ||
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
h.Property, plant and equipment
Property, plant and equipment are stated at cost, after deduction of the related investment grants, net of accumulated depreciation. Depreciation is calculated using the straight-line method over the estimated useful lives of the assets, as follows:
Years | |||
Buildings and leasehold improvements | 15 – 39 | ||
Machinery and equipment | 15 – 20 | ||
Motor vehicles | 7 | ||
Office furniture and equipment | 3 | – 5 | |
Software | 7 |
Leasehold improvements are included in buildings and amortized using the straight line method over the period of the lease contract, or the estimated useful life of the asset, whichever is shorter.
During 2021 the Company's management reassessed and updated the useful life of each one of the groups of fixed assets. The change in the estimated useful life was accounted for prospectively in accordance with ASC 250-10.
i.Grants from Israel Innovation Authority (IIA):
Grants received from the OCSIIA for approved research and development projects are recognized at the time the Company is reasonably assured that it will be entitled to such grants, on the basis of the costs incurred and included as a deduction from research and development expenses. Due to the fact that the Company is defined as a "Traditional Industry Company", under the OCSIIA regulations, thesethe majority of grants are non-royalty bearing.
j.Investment in thousands
affiliates and share in results of equity investment of affiliated companies
Investment in which the Group exercises significant influence and which is not considered a subsidiary ("affiliate") is accounted for using the equity method, whereby the Group recognizes its proportionate share of the affiliated company's net income or loss after the date of investment.
See Note 5.
The Group reviews this investmentthose investments for impairment whenever events indicate the carrying amount may not be recoverable. See Note 1(c).
On consolidation, transactions between the Group and the affiliate are eliminated in the amount which related to the Group's proportionate share of the affiliate.
F - 17
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
k.Leases
The Company determines if an arrangement is a lease at inception. Balances related to operating leases are included in operating lease right-of-use (“ROU”) assets and operating lease liabilities in the consolidated balance sheets.
ROU assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent the Company’s obligation to make lease payments arising from the lease. Operating lease ROU assets are recognized as the lease liability, adjusted for lease incentives received and prepayments made. Lease liabilities are recognized at the present value of the future lease payments at the lease commencement date. The Company’s lease terms may include options to extend or terminate the lease when it is reasonably certain that the Company will exercise that option. The discount rate for the lease is the rate implicit in the lease unless that rate cannot be readily determined. As the Company’s leases do not provide an implicit rate, the Company’s uses its estimated incremental borrowing rate based on the information available at the commencement date in determining the present value of lease payments. Lease expense for lease payments is recognized on a straight-line basis over the lease term (see also note 3(b)2aa).
Revenue from Leasing Transactions under ASC 842
The Company accounts for certain leasing revenues in accordance with ASC 842, which qualify for operating lease treatment. For operating leases in which the Company is the lessor, lease payments are recognized as leasing revenue over the lease term on a straight-line basis. APUs engines subject to operating leases are classified as property, plant, and equipment and depreciated on a straight-line basis over the useful life, see Note 7.
l.Identified intangible assets
Identifiable intangible assets are comprised of definite lived intangible. Definite lived intangible assets consist mainly of- customer relationships.
the amortization of the commercial license is recorded in the cost of sales.
m.Impairment of long-lived assets
Long-lived assets, including property, plant and equipment, operating lease right of use assets and definite life intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of the assets (or asset group) may not be recoverable. In the event that the sum of the expected future cash flows (undiscounted and without interest charges) of the long-lived assets (or asset group) is less than the carrying amount of such assets, an impairment charge would be recognized and the assets (or asset group) would be written down to their estimated fair values (see also notes 6 and 9)7).
n.Treasury Shares
Company shares held by the Company are presented as a reduction of equity at their cost to the Company.
F - 1518
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
o.Revenue recognition
The Group generates its revenues from the sale of OEM products and systems, providing MRO services (remanufacture, maintenance, repair and overhaul services and
A contract with a customer exists only when: the parties to the contract have approved it and are committed to perform their respective obligations, the Company can identify each party’s rights regarding the distinct goods or services to be transferred (“performance obligations”), the Company can determine the transaction price for the goods or services to be transferred, the contract has commercial substance and it is probable that the Company will collect the consideration to which it will be entitled in exchange for the goods or services that will be transferred to the customer.
Revenues are recorded in the amount of consideration to which the Company expects to be entitled in exchange for performance obligations upon transfer of control to the customer, excluding amounts collected on behalf of other third parties and sales taxes.
To determine revenue recognition for arrangements that an entity determines are within the scope of Topic 606, the entity performs the following five steps: (i) identify the contract(s) with a customer; (ii) identify the performance obligations in the contract; (iii) determine the transaction price; (iv) allocate the transaction price to the performance obligations in the contract; and (v) recognize revenue when (or as) the performance obligation is satisfied.
Other major provisions include capitalization of certain contract costs, consideration of the time value of money in the transaction price, and allowing estimates of variable consideration to be recognized before contingencies are resolved in certain circumstances.
F - 19
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
p.Revenue recognition (cont.)
The Company has adopted the following exemptions and accounting policies:
a. The Company has chosen to account for shipping as a fulfillment costs, in cases in which the shipping occurs after the customer has obtained control of a good.
b. The Company has chosen not to adjust the promised amount of consideration for the effects of a significant financing component, in cases in which the Company expects, at contract inception, that the period between when the Company transfers a promised good or service to the customer and when the customer pays for that good or service will be one year or less.
c. The Company has chosen to present all sales taxes collected from customers on a net basis.
The group recognizes revenues from the sale of OEM products are recognized when persuasive evidence of an arrangement exists, delivery ofit satisfies a performance obligation, i.e. when or as the customer obtains control upon product has occurred, provided the collection of the resulting receivable is reasonably assured, the price is fixed or determinable and no significant obligation exists.shipment. The Group does not grant a right of return.
The Group recognizes revenues from MRO services are generally recognized when services are completed and the item is shipped back to the customer. In cases in which contracts require exchanging a defective landing gear for a restored gear, the non-refundable minimum amounts from these contracts are recognized on the exchange date (delivery of the product has occurred), and any additional amounts billed to the customer for excess hours of repair, are recognized when the customer approve the price for these additional services.
Contract liabilities
Contract liabilities are expected to be incurred based on its historical experience. The costs incurred related to the maintenance contracts are not incurred on a straight-line basis, as the timing to provide the maintenance services is dependent on when parts under these contracts require maintenance. Therefore, the Group accrues revenue as costs are incurred. These contracts are reviewed on a timely basis and adjusted (if required) based on total expected cost.
F - 1620
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
q.Warranty costs
The Group provides warranties for its products and services ranging from one to three years, which vary with respect to each contract and in accordance with the nature of each specific product.
According to company's experience, most of the warranty costs incur during the first year of the contract.
The Group estimates the costs that may be incurred under its warranty and records a liability in the amount of such costs at the time revenue is recognized.recognized under accrued expenses on the company’s balance sheet. The Group periodically assesses the adequacy of its recorded warranty liabilities and adjusts the amounts as necessary.
r.Research and development
Research and development costs, net of grants, are charged to expenses as incurred.
s.Fair value measurement
The Group measures fair value and discloses fair value measurements for financial and non-financial assets and liabilities. Fair value is based on the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.
The accounting standard establishes a fair value hierarchy that prioritizes observable and unobservable inputs used to measure fair value into three broad levels, which are described below:
Level 1: Quoted prices (unadjusted) in active markets that are accessible at the measurement date for identical assets or liabilities. The fair value hierarchy gives the highest priority to Level 1 inputs.
Level 2: Observable prices that are based on inputs not quoted on active markets, but corroborated by market data or active market data for similar but not identical assets or liabilities.
F - 21
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
s.Fair value measurement (cont.)
Level 3: Unobservable inputs are used when little or no market data is available. The fair value hierarchy gives the lowest priority to Level 3 inputs.
In determining fair value, the Group utilizes valuation techniques that maximize the use of observable inputs and minimize the use of unobservable inputs to the extent possible and considers credit risk in its assessment of fair value.
t.Concentrations of credit risk
Financial instruments that potentially subject the Group to concentrations of credit risk consist principally of cash and cash equivalents, derivatives and accounts receivable.
Cash and cash equivalents are deposited with major banks in Israel and the United States. Such deposits in the United States may be in excess of insured limits and are not insured in other jurisdictions. Management believes that the financial institutions that hold the Group's cash and cash equivalents are financially sound. Accordingly, minimal credit risk exists with respect to these financial instruments.
The Group's accounts receivable are derived mainly from sales to customers in the United States, Israel and Europe. The Group generally does not require collateral; however, in certain circumstances the Group may require letters of credit. Management believes that credit risks relating to accounts receivable are minimal since the majority of the Group's customers are world-leading manufacturers of aviation systems and aircrafts, international airlines, governments and air-forces, and world-leading manufacturers and integrators of defense and ground systems. In addition, the Group has relatively a large number of customers with wide geographic spread which mitigates the credit risk. The Group performs ongoing credit evaluation of its customers' financial condition.
As part of the risk management, the company purchased a credit insurance policy from a well-known insurance company.
u.Income taxes
Income taxes are accounted for in accordance with ASC 740 "Income Taxes". This statement prescribes the use of the asset and liability method, whereby deferred tax assets and liabilities account balances are determined based on temporary differences between financial reporting and tax basis of assets and liabilities and for tax loss carry-forwards. Deferred taxes are measured using the enacted laws and tax rates that will be in effect when the differences are expected to reverse. The Group provides a valuation allowance, if necessary, to reduceit is more likely than not that a portion of the deferred income tax assets to their estimated realizable value,will not be realized, see note 15(h)17(h).
Taxes which would apply in the event of disposal of investments in foreign subsidiaries have not been taken into account in computing the deferred taxes, when the Group’s intention is to hold, and not to realize the investments.
Taxes which would apply in the foreseeable future it does not recordevent of distribution of earnings from foreign subsidiaries of the Company, have been taken into account in computing the deferred taxes, in respectwhen there is a possibility of future distribution of earnings from such foreign subsidiaries.
F - 22
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
u.Income taxes that would have been paid in such event.
(cont.)
The Group did not provide for deferred taxes attributable to dividend distribution out of retained tax-exempt earnings from "Approved/Benefited Enterprise" plans (see note 15(a)13(a)), since it intends to permanently reinvest them and has no intention to declare dividends out of such tax exempt income in the foreseeable future. Management considers such retained earnings to be essentially permanent in duration. The payment of dividend in 2014 was paid from earnings from regular income of the Israeli company.
Results for tax purposes for TAT’s Israeli subsidiaries are measured and reflected in NIS and for TAT’s U.S. subsidiaries are measured and reflected in U.S. dollars. NIS.
As explained in (b)(c) above, the consolidated financial statements are measured and presented in U.S. dollars. In accordance with ASC 740, TAT has not provided deferred income taxes on the differences resulting from changes in exchange rate and indexation.
The Group follows a two-step approach to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate resolution. The Group’s policy is to include interest and penalties related to unrecognized tax benefits within financial income (expense). Such liabilities are classified as long-term, unless the liability is expected to be resolved within twelve months from the balance sheet date.
v.Earnings per share
Basic earnings (loss) per share are computed by dividing net income (loss) by the weighted average number of shares of the Company's Ordinary Shares, par value NIS 0.9 per share outstanding for each period.
Diluted earnings (loss) per share are calculated by dividing the net income by the fully-diluted weighted-average number of ordinary shares outstanding during each period. Potentially dilutive shares include outstanding options granted to employees.
employees and directors, using the treasury stock method.
When the Company acquires a business, the purchase price is allocated based on the fair value of tangible assets and identifiable intangible assets acquired, and liabilities assumed. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. Goodwill as of the acquisition date is measured as the residual of the excess of the consideration transferred, plus the fair value of any noncontrolling interest in the acquiree at the acquisition date, over the fair value of the identifiable net assets acquired. If the fair value of the net assets acquired exceeds the purchase price, the resulting bargain purchase is recognized as a gain in the consolidated statement of operations. The Company generally engages independent, third-party appraisal firms to assist in determining the fair value of assets acquired and liabilities assumed. Such a valuation requires management to make significant estimates, especially with respect to intangible assets. These estimates are based on historical experience and information obtained from the management of the acquired companies. These estimates are inherently uncertain. For all acquisitions, operating results are included in the consolidated statement of operations from the date of acquisition.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
w.Share-based compensation
The Group applies ASC 718 "Stock Based Compensation" with respect to employees and directors’ options, which requires awards classified as equity awards to be accounted for using the grant-date fair value method. The fair value of share-based awards is estimated using the Black-Scholes valuation model, the payment transaction is recognized as expense over the requisite service period, net of estimated forfeitures. The GroupCompany estimates forfeitures based on historical experience and anticipated future conditions.
F - 23
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
w.Share-based compensation (cont)
The Group recognizes compensation cost for an award with only service conditions that has a graded vesting schedule using the accelerated method over the requisite service period for the entire award. For an award with performance conditions that has a graded vesting schedule, compensation cost is recognized upon meeting such conditions, using the accelerated method over the requisite service period for the entire award.
x.Comprehensive income (loss)
Comprehensive income in 20152021, 2020 and 2019 includes, in addition to net income or loss, gains and losses of derivatives designated for cash flow hedge accounting (net of related taxes where applicable). In 2014 and 2013, comprehensive income includes, currency translation adjustments that were related to the subsidiary that was sold in 2014. See also note 5.
Reclassification adjustments for gain or loss of derivatives are included in the relevant line item in operating expenses based on the employees function in the statement of income. See also note 2 (cc)(z).
F - 2124
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
y.Contingencies
Certain conditions may exist as of the date the financial statements are issued, which may result in a loss to the Group but which will only be resolved when one or more future events occur or fail to occur. The Group’s management assesses such contingent liabilities and estimated legal fees, if any, and accrues for these costs. Such assessment inherently involves an exercise of judgment. In assessing loss contingencies related to legal proceedings that are pending against the Group or unasserted claims that may result in such proceedings, the Group’s management evaluates the perceived merits of any legal proceedings or unasserted claims as well as the perceived merits of the amount of relief sought or expected to be sought.
Management applies the guidance in ASC 450-20-25 when assessing losses resulting from contingencies. If the assessment of a contingency indicates that it is probable that a material loss has been incurred and the amount of the liability can be estimated, then the estimated liability is recorded as accrued expenses in the Company’s financial statements. If the assessment indicates that a potential material loss contingency is not probable but is reasonably possible, or is probable but cannot be estimated, then the nature of the contingent liability, together with an estimate of the range of possible loss if determinable and material are disclosed.
Loss contingencies considered to be remote by management are generally not disclosed unless they involve guarantees, in which case the guarantee would be disclosed.
z.Derivatives and hedging
The Company carries out transactions involving foreign currency exchange derivative financial instruments. The transactions are designed to hedge the Company’s exposure in currencies other than the U.S. dollar. The Company recognizes derivative instrumentsDerivatives are recognized at fair value as either assets or liabilities in the consolidated balance sheets in accordance with ASC Topic 815, “Derivatives and measures those instruments at fair value. Hedging”.
For derivative instruments that are designated and qualify as a cash-flow hedge, the effective portion of the gain or loss on the derivative instrument is reported as a component of other comprehensive income and reclassified into earnings in the same line item associated with the anticipated transaction in the same period or periods during which the hedged transaction affects earnings. The ineffective portion of a derivative designated as a cash flow hedge is recognized in "financial expense (income), net".
If a derivative does not meet the definition of a cash flow hedge, the changes in the fair value are included in "financial expense (income), net".
For derivative instruments that qualify for hedge accounting, the cash flows associated with these derivatives are reported in the consolidated statements of cash flows consistently with the classification of the cash flows from the underlying hedged items that these derivatives are hedging.
F - 2225
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 2 -SIGNIFICANT ACCOUNTING POLICIES (CONT)
aa.Restructuring Costs
Restructuring costs have been recorded in thousands
connection with TAT’s restructuring plan announced in March 2021. Following this decision and in anticipation of ongoing efficiency measures in our business, TAT’s management has made estimates and judgments regarding future plans, mainly related to employee termination benefit costs. Management also assesses the recoverability of long-lived assets employed in the business. In certain instances, asset lives have been shortened based on changes in the expected useful lives of the affected assets. Asset-related impairments and employee's severance and other related costs are reflected within asset impairments of fixed assets, provision for restructuring plan and restructuring expenses.
bb.Recently Issued Accounting Principles:
Recently adopted accounting pronouncements:
(1)In December 2019, the FASB issued ASU 2019-12, “Simplifying the Accounting for Income Taxes. (Topic 740)” ("the Update"). The guidanceamendments in this Update simplify the accounting for income taxes by removing the following exceptions in ASC 740: 1. Exception to the incremental approach for intra-period tax allocation when there is a loss from continuing operations and income or a gain from other items; 2. Exception to the requirement to recognize a deferred tax liability for equity method investments when a foreign subsidiary becomes an equity method investment; 3. Exception to the ability not to recognize a deferred tax liability for a foreign subsidiary when a foreign equity method investment becomes a subsidiary;4. Exception to the general methodology for calculating income taxes in an interim period when a year-to-date loss exceeds the anticipated loss for the year.
In addition, this Update also requires enhanced disclosures regardingsimplify the nature,accounting for income taxes in certain topics as follows: 1. Requiring that an entity recognize a franchise tax (or similar tax) that is partially based on income as an income-based tax and account for any incremental amount timingincurred as a non-income-based tax; 2. Requiring that an entity evaluate when a step up in the tax basis of goodwill should be considered part of the business combination in which the book goodwill was originally recognized and uncertaintywhen it should be considered a separate transaction;3. Specifying that an entity can elect (rather than required to) allocate the consolidated amount of revenuecurrent and cash flows arising fromdeferred tax expense to a legal entity that is not subject to tax in its separate financial statements;4. Requiring that an entity reflect the effect of an enacted change in tax laws or rates in the annual effective tax rate computation in the interim period that includes the enactment date.
The amendments in this Update are effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. The new standard does not have a material effect on the Company's financial statements upon adoption.
Accounting pronouncements issued but not yet adopted:
(1)In November 2021, the FASB issued ASU 2021-10, Government Assistance (Topic 832), which increases the transparency of government assistance including disclosure of the type of assistance, an entity’s contracts with customers. The guidanceaccounting for the assistance, and the effect of the assistance on an entity’s financial statements. ASU 2021-10 is effective for the interim and annual periods beginning on or after December 15, 2017 (early adoption is permitted inall entities for financial statements issued for annual periods beginning after December 15, 2016). The guidance permits2021. An entity should apply the use ofamendments either a retrospective or cumulative effect transition method. The Company is currently evaluatingprospectively to all transactions within the impactscope of the amended guidance on its consolidated financial statements.
Year ended December 31 | ||||||||
2015 | 2014 | |||||||
| Revenue | 92,230 | 87,598 | ||||||
| Net income | 801 | 1,463 | ||||||
| Earnings per share: | ||||||||
| Basic and Diluted | 0.09 | 0.17 | ||||||
F - 26
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | |
U.S. dollars in thousands |
December 31, | ||||
2014 | ||||
| Current assets | $ | 10,596 | ||
| Long-term assets | 8,927 | |||
| Total assets | 19,523 | |||
| Current liabilities | 5,964 | |||
| Long-term liabilities | 4,624 | |||
| Total liabilities | $ | 10,588 | ||
Year ended December 31, | ||||||||
2014 | 2013 | |||||||
| Net sales | $ | 24,442 | $ | 23,445 | ||||
| Gross profit | 7,342 | 6,182 | ||||||
| Income (loss) from continuing operations | 827 | (341 | ) | |||||
| Net income | 727 | 3,158 | ||||||
| Income attributable to common stockholders | $ | 336 | $ | 2,821 | ||||
Year ended December 31, | ||||||||
2014 | 2013 | |||||||
| Share in income related to common stockholders | $ | 49 | $ | 838 | ||||
| Share in income related to preferred stock | 218 | 187 | ||||||
| Net income | $ | 267 | $ | 1,025 | ||||
Year ended December 31, 2013 | ||||
| Revenues | $ | 9,589 | ||
| Loss before taxes on income (tax benefit) | $ | (148 | ) | |
| Loss from discontinued operations, net of tax ($5 and $3 in 2013 and 2012, respectively) | $ | (3,471 | ) | |
| Loss from discontinued operations attributable to non-controlling interest | 1,042 | |||
| Loss from discontinued operations attributable to TAT Technologies Ltd. shareholders | $ | (2,429 | ) | |
NOTE 53 -FAIR VALUE MEASUREMENT
Recurring Fair Value Measurements
The Group measures fair value and discloses fair value measurements for financial assets and liabilities. Fair value is based on the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.
The Company's financial assets and liabilities measured at fair value on a recurring basis, consisted of the following types of instruments:
December 31, 2021 | ||||||||||||||||
Level 1 | Level 2 | Level 3 | Total | |||||||||||||
Assets: | ||||||||||||||||
Derivative financial instruments | 0- | $ | 51 | 0- | $ | 51 | ||||||||||
December 31, 2020 | ||||||||||||||||
Level 1 | Level 2 | Level 3 | Total | |||||||||||||
Assets: | ||||||||||||||||
Derivative financial instruments | 0- | $ | 128 | 0- | $ | 128 | ||||||||||
| December 31, 2015 | ||||||||||||||||
| Level 1 | Level 2 | Level 3 | Total | |||||||||||||
| Liabilities: | ||||||||||||||||
| Contingent liability (see also note 12 (g)) | $ | - | $ | - | $ | 640 | $ | 640 | ||||||||
| Derivative financial instruments | $ | - | $ | 14 | $ | - | $ | 14 | ||||||||
| December 31, 2014 | ||||||||||||||||
| Level 1 | Level 2 | Level 3 | Total | |||||||||||||
| Assets: | ||||||||||||||||
| Money Market | $ | 1,136 | $ | - | $ | - | $ | 1,136 | ||||||||
| Liabilities: | ||||||||||||||||
| Derivative financial instruments | $ | - | $ | 463 | $ | - | $ | 463 | ||||||||
a.Derivative financial instruments:
The contingent consideration liability incompany hedges the acquisitionforeign currency risk arising from probable forecasted Israeli Shekel ("ILS") expenses as part of Turbochrome shares was computed onits risk management policy. The risk management objective is to hedge the foreign currency exchange rate fluctuations associated with ILS denominated forecasted probable expenses according to the company's hedging policy. The majority of the ILS exposure arises from expected revenue to be generated by the company using a binomial tree model income approach.related salary expenses. The Company will reassess theenters into contracts for derivative financial instruments forward contracts in order to execute its policy. Such derivatives are recognized at fair value of the contingent consideration on a quarterly basis and record any applicable adjustments to earnings in the period they are determined.
value. The fair value of the contingent liabilityforward contracts is calculated as of December 31, 2015 was estimated using the following assumptions:
The effective portion and the testing period, based on translating the Israeli Shekel amountineffective portion of the gain or loss on the hedging instrument is recognized as other comprehensive income (loss).
The effective portion is determined by looking into changes in spot exchange rate.
The change in fair value attributable to changes other than those due to fluctuations in the spot exchange rate are excluded from the assessment of hedge effectiveness and are recognized in the statement of income under financial expenses-net.
F - 27
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 3 -FAIR VALUE MEASUREMENT (CONT)
For derivative at current forward rateinstruments that are designated and qualify as a cash-flow hedge, the gain or loss on the derivative instrument is reported as a component of other comprehensive income and reclassified into earnings in the same line item associated with the anticipated transaction in the same period or periods during which the hedged transaction affects earnings.
For derivative instruments that qualify for hedge accounting, the remaining hedging period.
cash flows associated with these derivatives are reported in the consolidated statements of cash flows consistently with the classification of the cash flows from the underlying hedged items that these derivatives are hedging.
As of December 31, 2015,2021, and 2020, the companyCompany has open forward contracts with a notional total amount of $3,638.
$0 and $3,345, respectively. As of December 31, 2014,2021, the company has contractsopen call options and open put options with a notional total amount of $4,800.
$8,458 and $8,858, respectively.
The carrying amounts of financial instruments include cash and cash equivalents, short-term bank deposits, accounts receivable, accounts payable and accrued liabilities approximate fair value because of their short maturities.
NOTE 4 - 30
INVENTORY
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
Accrued expenses:
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT’s liability for severance pay, for their Israeli employees, is calculated pursuant to Israeli Severance Pay Law based on the most recent salary of the employees multiplied by the number of years of employment as of the balance sheet date.
TATCompany and Turbochrome liability for all of its Israeli employees is fully covered for by monthly deposits with severance pay funds, insurance policies, Mivtahim Social Insurance Institution Ltd. ("Mivtahim"). The liability covered by deposits with Mivtahim is irrevocably transferred to Mivtahim. Accordingly, neither the amounts accumulated with Mivtahim, nor the corresponding liabilities for severance pay are reflected in the consolidated balance sheet.
The deposited funds include profits accumulated up to the balance sheet date. The deposited funds may be withdrawn only upon the fulfillment of the obligation pursuant to Israeli Severance Pay Law or labor agreements. The value of the deposited funds is based on the cash surrender value of these policies and includes profits (or loss) accumulated through the balance sheet date.
The Israeli companiessubsidiary are required to make severance paymentpayments upon dismissal of an employee or upon termination of employment in certain circumstances. The severance payment liability to the employees (based upon length of service and the latest monthly salary - one month’s salary for each year employed) is recorded on the Company'sCompany’s balance sheetssheet under “Employee“Liability in respect of employees rights upon retirement.” The liability is recorded as if it were payable at each balance sheet date on an undiscounted basis.
In case an employee did not agree
According to Section 14 of the Israeli Severance Pay Law, the Israeli companies liability for certain employees, according to their employment agreements, make regular deposits with certain insurance companies for accounts controlled by each applicable employee in order to secure the employee’s rights upon retirement. The Israeli companies are fully relieved from any severance pay liability with respect to each such employee after they make the payments on behalf of the employee. The liability accrued in respect of these employees and the amounts funded, as of the respective agreement dates, are not reflected in the Israeli Company balance sheets, as the amounts funded are not under the control and management of the Israeli company and the pension or severance pay risks have been irrevocably transferred to the applicable insurance companies (the “Contribution Plans”).F - 34
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousandsNOTE 11 - LONG-TERM EMPLOYEE-RELATED OBLIGATIONS (CONT)
With regard to the employees without a Contribution Plan, liability is funded in part from the purchase of insurance policies or by the establishment of pension funds with dedicated deposits in the funds. The amounts used to fund these liabilities are included in the balance sheets under “Funds in respect of employee rights upon retirement” These policies are the Company's assets.
The amounts of severance payment expenses for the Israeli companies were $554 and $555 for the years ended December 31, 2015 and 2014, respectively, of which $165 and $174 in the years ended December, 2015 and 2014, respectively, were in respect of the Contribution Plan and funded accordingly.
F - 35
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
Limco-Piedmont leases some of its operatingsales of products developed by the third parties. Royalty expenses were $95, $174 and office facilities for various terms under long-term, non-cancelable operating lease agreements. The leases expire at various dates through 2025. Certain leases contain renewal options as defined in the agreements. Lease expense (excluding related parties) totaled $419, $271 and $215$42 for the years ended December 31, 2015, 2014,2021, 2020 and 20132019, respectively.
TAT leases its factory The royalties were recorded as part of the cost of revenues. The royalties were recorded as part of the cost of revenues.F - 36
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
NOTE 12 - COMMITMENTS AND CONTINGENT LIABILITIES (CONT)
As of December 31, 2015, future minimum rental payments under non-cancelable operating leases are as follows:
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
NOTE 12 - COMMITMENTS AND CONTINGENT LIABILITIES (CONT)
The Company entered into several three-year leases for vehicles. The current monthly lease fees aggregate approximately $35. The expected lease payments for the years ending December 31, 2016, 2017 and 2018 are approximately $323, $206 and $55, respectively.
On October 19, 2015, the company acquired 100% of Turbochrome Ltd. shares for approximately US$ 3.5 million (subject to certain price adjustments). The acquisition was funded through cash on hand and an earn-out payment (up to $2 million). The earn-out Payment is based on the actual revenues of Turbochrome during the calendar years 2015 and 2016. The contingent consideration liability was computed on expected revenue to be generated by the acquired company using a binomial tree model income approach. The Company will reassess the fair value of the contingent consideration on a quarterly basis and record any applicable adjustments to earnings in the period they are determined. The adjustments will be classified as other income. As of December 31, 2015, the fair value of the contingent considerations was $640 ($500 in accrued expenses and $140 in other long-term liabilities). According to the results of Turbochrome for the year 2015, Turbochrome met the revenue target for 2015 and, subject to the terms of the share purchase agreement, TAT will be obligated to pay to Chromalloy American LLC (the previous shareholder of Turbochrome), $500 as an earn out payment with respect to fiscal year 2015 revenues.
F - 38
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
Following the company's amended and restated 2012 stock plan related to the adjustment of the exercise price in respect of dividend distribution, the dividend yield was amended to 0%.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
On March 19, 2014, TAT’s Board declared a cash dividend in the total amount of $2 million (approximately NIS 6.9 million), or $0.22 per share (approximately NIS 0.76 per share), for all of the shareholders of TAT. The dividend was paid on May 7, 2014 to shareholders of record on April 21, 2014.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
In January 2016, the Law for the Amendment of the Income Tax Ordinance (No.216) was published, enacting a reduction ofstandard Israeli corporate tax rate, beginningwhich was 23% for all years included in 2016 and thereafter, from 26.5% to 25%. There is no impact on thethese financial statements of the Company as a result of the changes in the Israeli corporate tax rate.
Inventory is composed of the following:
December 31, | ||||||||
2021 | 2020 | |||||||
| ||||||||
Raw materials and components | $ | 13,741 | $ | 11,281 | ||||
Work in progress | 11,985 | 15,432 | ||||||
Spare parts | 13,462 | 13,147 | ||||||
Finished goods | 1,815 | 1,363 | ||||||
| ||||||||
Total inventory (**) | $ | 41,003 | $ | 41,223 | ||||
(**) The total amount of Rotables included in the company spare parts inventory for the years ended December 31, 2021 and 2020 were $8,623 and $9,183, respectively.
Inventories write down expenses due to slow inventory amounted to $624, $769 and $490 for the years ended December 31, 2021, 2020 and 2019, respectively.
The company maintains a wide range of exchangeable units and other spare parts related to its products and services in various locations. Due to the long lead time of its suppliers and manufacturing cycles, the company needs to forecast demand and commit significant resources towards these inventories. As such, the Company is subject to risks including excess inventory no longer relevant.
F - 28
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 5 -INVESTMENT IN AFFILIATES
On November 25, 2015, the Company signed an agreement with Russian-based Engineering Holding of Moscow (“Engineering”), to establish a new facility for the provision of services for heat transfer products. The new company, TAT-Engineering LLC, is based in Novosibirsk’s Tolmachevo airport. TAT-Engineering, LLC shall provide services for heat transfer products. 51% of TAT-Engineering LLC's shares are held by TAT and the remaining 49% are held by Engineering. The accounting treatment of the joint venture is based on the equity method due to variable participating rights granted to Engineering. The new entity was established in January 2016.
Summarized financial information of TAT-Engineering LLC:
| December 31, | ||||||||
| 2015 | 2014 | |||||||
| Raw materials and components | $ | 9,823 | $ | 11,333 | ||||
| Work in progress | 19,798 | 14,673 | ||||||
| Spare parts | 6,340 | 8,956 | ||||||
| Finished goods | 703 | 515 | ||||||
| $ | 36,664 | $ | 35,477 | |||||
December 31, | ||||||||
2021 | 2020 | |||||||
Balance sheets: | ||||||||
Current assets | $ | 358 | $ | 320 | ||||
Non-current assets | 1,091 | 1,211 | ||||||
Current liabilities | 1,154 | 1,088 | ||||||
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Statements of operation: | ||||||||||||
Revenues | $ | 501 | $ | 413 | $ | 877 | ||||||
Gross loss | (22 | ) | (153 | ) | (228 | ) | ||||||
Net loss | (148 | ) | (365 | ) | (291 | ) | ||||||
Net losses attributable to the Company | (76 | ) | (185 | ) | (132 | ) | ||||||
NOTE 76 -PROPERTY, PLANT AND EQUIPMENT, NET
Composition of assets, grouped by major classifications, is as follows:
December 31, | ||||||||
2021 | 2020 | |||||||
Cost: | ||||||||
Land and buildings | $ | 18,031 | $ | 15,762 | ||||
Machinery and equipment | 63,875 | 57,245 | ||||||
Motor vehicles | 302 | 313 | ||||||
Office furniture and equipment | 1,906 | 1,895 | ||||||
Software | 2,123 | 2,048 | ||||||
86,237 | 77,263 | |||||||
| ||||||||
Less: Accumulated depreciation | 55,775 | 51,526 | ||||||
Depreciated cost | $ | 30,462 | $ | 25,737 | ||||
| December 31, | ||||||||
| 2015 | 2014 | |||||||
| Cost: | ||||||||
| Land and buildings | $ | 11,112 | $ | 6,232 | ||||
| Machinery and equipment | 41,378 | 36,299 | ||||||
| Motor vehicles | 334 | 334 | ||||||
| Office furniture and equipment | 1,789 | 1,646 | ||||||
| Software | 1,259 | 1,197 | ||||||
| 55,872 | 45,708 | |||||||
| Less: Accumulated depreciation | 36,938 | 34,184 | ||||||
| Depreciated cost | $ | 18,934 | $ | 11,524 | ||||
Depreciation expenses amounted to $2,753, $2,069$4,718 $3,960 and $1,859$4,238 for the years ended December 31, 2015, 20142021, 2020 and 2013,2019, respectively. During 2021, as part of the Company's restructuring plan and departure from Gedera's facility, the company wrote off leasehold improvement assets in total amount of $1.8 million, out of this amount $600 was recognized as restructuring expenses due to impairment in OEM of heat transfer solutions and aviation accessories CGU which exanimated following the company's restructuring plan announcement in March 2021.
$1.2 million recognized in cost of sales as an acceleration of amortization due to change in useful life of leasehold improvements assets.
F - 29
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 7 -LEASES
Lease commitments:
Limco-Piedmont leases some of its operating and office facilities for various terms under long-term, non-cancelable operating lease agreements. The leases expire at various dates through 2030, certain leases contain renewal options as defined in the agreements.
TAT leases its factory in Gedera from TAT Industries until the end of 2024. During 2021, the company negotiated with the landlord an agreement for the early termination of such lease. A termination agreement was signed between TAT and the landlord in January 2022. Pursuant to such agreement, it was agreed that TAT will vacate the facility in Gedera on March 31, 2022. Due to the execution of such agreement, the company wrote off operating ROU assets of $1.8 million and lease liability of $3.3 million as of December 31, 2021. Net income resulting from the write-off of such lease assets and liability was allocated to operating restructuring expenses.
The lease cost was as follows:
Year ended December 31, 2021 | Year ended December 31, 2020 | |||||||
Operating lease expenses | 2,080 | 2,158 | ||||||
Supplemental cash flow information related to leases was as follows:
Year ended December 31, 2021 | Year ended December 31, 2020 | |||||||
Operating cash flows from operating leases | 2,226 | 2,158 | ||||||
Right-of-use assets obtained in exchange for lease obligations (non-cash) | 399 | 1,756 | ||||||
During 2021 the company established a new business unit which provided to the company’s customers leasing services of APU engines. The result of this business unit is reported as part of the company's activity in MRO services for aviation components.
F - 30
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 7 -LEASES (CONT)
Supplemental balance sheet information related to operating leases is as follows:
December 31, 2021 | December 31, 2020 | |||||||
Operating Leases | ||||||||
Operating lease right-of-use assets | 3,114 | 6,767 | ||||||
| ||||||||
Current operating lease liabilities | 1,169 | 1,614 | ||||||
Non-current operating lease liabilities | 1,989 | 5,758 | ||||||
Total operating lease liabilities | 3,158 | 7,372 | ||||||
| ||||||||
Weighted Average Remaining Lease Term | ||||||||
Operating leases - Israel | 2 years | 4 years | ||||||
Operating leases – United States | 5 years | 5 years | ||||||
| ||||||||
Weighted Average discount rate | ||||||||
Operating leases - Israel | 4.5 | % | 4.5 | % | ||||
Operating leases – United States | 4.84 | % | 4.84 | % | ||||
As of December 31, 2021, the maturities of lease liabilities were as follows:
Year | Amount | |||
2022 | $ | 1,221 | ||
2023 | 757 | |||
2024 | 643 | |||
2025 | 241 | |||
2026 | 241 | |||
2027 and after | 182 | |||
Total lease payments | 3,285 | |||
Less imputed interest | (127 | ) | ||
Total | $ | 3,158 | ||
F - 31
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 8 -INTANGIBLE ASSETS
Intangible assets:
December 31, | ||||||||
2021 | 2020 | |||||||
Customer relationships | ||||||||
Cost | $ | 0- | $ | 671 | ||||
Impairment | 0- | (298 | ) | |||||
Accumulated amortization | 0- | (373 | ) | |||||
Amortized cost | $ | 0- | $ | 0- | ||||
The COVID-19 pandemic and the significant reduction in the reconditioning and coating segment (“Turbochrome”) business during 2020 were a trigger event for impairment of the customer relationships asset. The Company believes there will be no future economic benefits that will be derived from the customers attributed to this intangible asset. Therefore, the Company wrote off the amortized cost related to the customer relationships. The write off expenses recorded in 2020 P&L under Other Expenses.
December 31, | ||||||||
2021 | 2020 | |||||||
Commercial license | ||||||||
Cost | $ | 2,030 | $ | 1,513 | ||||
Accumulated amortization | (201 | ) | (38 | ) | ||||
Amortized cost | $ | 1,829 | $ | 1,475 | ||||
On September 2020 Piedmont signed a 10 years agreement for the commercial MRO services for aviation components. Under this contract Honeywell licensed Piedmont as an authorized MRO station of APU 331-20X.
Estimated amortization expenses for the five succeeding years is $160 per year.
December 31, | ||||||||
2015 | 2014 | |||||||
| Customer relationships | ||||||||
| Cost | $ | 1,342 | $ | - | ||||
| Accumulated amortization | (28 | ) | - | |||||
| Amortized cost | $ | 1,314 | $ | - | ||||
F - 32
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 9 - OTHER BALANCE SHEETS SUPPLEMENTAL INFORMATIONRESTRUCTURING COST
In March 2021, the Company announced a restructuring plan, pursuant to which, the Company will transfer the Company's operations from its leased facility in Gedera to its facility in Tulsa, Oklahoma and to its facility in Kiryat Gat.
This will enable TAT to concentrate on heat exchanges activity in the United States allowing for better operational flow, getting closer to TAT’s customer base, and cutting fixed costs.
During 2021 the company started executing the plan which will mature during 2022.
The restructuring plan has a material impact on the company's financial statements for the year 2021 as follows:
Restructuring Items | December 31, 2021 | |||
| ||||
Balance sheet | ||||
Provision for employee’s termination expenses | $ | 657 | ||
Investment in building and infrastructures | $ | 2,382 | ||
Investment in machineries (**) | $ | 3,478 | ||
Total | $ | 6,517 | ||
| ||||
Profit and loss | ||||
Restructuring expenses, net | ||||
Employee’s termination cost | $ | 686 | ||
Restructuring income from lease modification | $ | (1,315 | ) | |
Restructuring expenses from asset’s impairment | $ | 1,800 | ||
Other restructuring expenses | $ | 584 | ||
Cost of sales | ||||
Acceleration of assets depreciation expenses | $ | 1,200 | ||
Total | $ | 2,955 | ||
| December 31, | ||||||||
| 2015 | 2014 | |||||||
| Employees and payroll accruals | $ | 2,657 | $ | 2,149 | ||||
| Accrued expenses | 1,081 | 543 | ||||||
| Authorities | 952 | 428 | ||||||
| Advances from customers | 1,295 | 741 | ||||||
| Deferred income | 240 | 117 | ||||||
| Warranty provision | 324 | 251 | ||||||
| Contingent consideration | 500 | - | ||||||
| Accrued royalties | 752 | 368 | ||||||
| Hedge instruments | 14 | 463 | ||||||
| $ | 7,815 | $ | 5,060 | |||||
* Net cash used in operating activity for restructuring expenses in 2021 was $580.
** Investment in machineries were offset by a grant of $1.2 million received from the State Of Oklahoma as part of a larger incentive plan granted to TAT. As part of this plan TAT Limco will be entitled to several incentives including additional grants, tax exempt and incentives and support in employee's salaries over the next 10 years.
F - 3233
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 10 - TRANSACTIONS WITH RELATED PARTIES
During 2021, TAT received loans from commercial banks in an aggregate amount of $3 million. These new loans are in addition to three previous loans received in 2020 in an aggregate amount of $3.3 million. An amount of $691 was classified to short-term loan as of December 31, 2021. These loans are guaranteed by the Israeli government. The loans bear annual interest of 3.1% (Prime Rate+1.5%) which are paid in equal monthly instalments as of April 2021 through February 2031.Repayment of the principal amount of the loans will begin on 2022.
During 2020 TAT received a loan of approximately $3.1 million under the U.S. Small Business Administration Payroll Protection Program (“PPP”) which was created under the Coronavirus Aid, Relief and Economic Security Act. Under the PPP, repayment of the loan, including interest, may be forgiven based on payroll expenses, rent, utilities and other qualifying expenses incurred during a certain period following receipt of the loan, provided that TAT will adhere to specific requirements outlined in the PPP. Based on SBA's forgiveness approval notice, an amount of $1.7M has been recognized as a grant in 2020 and $1.4 million has been recognized as a grant in 2021.
The grant was recognized as a deduction from cost of revenues and the related operating expenses.
In March 2021 TAT received a short-term credit line of $3 million from a commercial bank in the US. This new credit line is in addition to a previous credit line received in 2020 in an aggregate amount of $3 million with the same conditions. The loans bear an annual interest rate of 3.6% and can be renewed by the end of the year for additional 12-month period. The carrying amounts of the short-term credit line is approximate fair value because of its short maturities. The loans have financial covenants such as a) tangible net worth to funded debt ratio of not less than 3 to 1, b) positive EBITDA, and c) minimum eligible accounts receivable of $6 million. The company satisfied such covenants as of December 31, 2021 and 2020.
Maturities on long term loans are as follows:
Year | Amount | |||
2022 | $ | 691 | ||
2023 | 877 | |||
2024 | 877 | |||
2025 | 738 | |||
2026 and after | 3,487 | |||
$ | 6,670 | |||
| Year ended December 31, | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| Compensation and benefits to senior management, including benefit component of option grants | 1,236 | 1,213 | 1,237 | |||||||||
| Number of individuals to which this benefit related | 5 | 5 | 5 | |||||||||
| Compensation and benefits to the chairman of the Board | 173 | 188 | 112 | |||||||||
| Number of individuals to which this benefit related | 1 | 1 | 1 | |||||||||
| Compensation and benefits to directors | 161 | 131 | 169 | |||||||||
| Number of individuals to which this benefit related | 5 | 5 | 5 | |||||||||
| Year ended December 31, | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| Management fees (1) | - | - | 29 | |||||||||
| Lease expenses (2) | $ | - | $ | - | $ | 424 | ||||||
NOTE 11 -GOVERNMENT GRANTS
During 2021, TAT received government grants as part of the Coronavirus Aid and Relief in total amount of $3.6 million which was recognized as a deduction from payroll and overhead cost of revenues and operating expenses. As of December 31, 2021, the “other current assets and prepaid expenses” included government grant receivable in the amount of $982.
F - 3334
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 12 -ACCRUED EXPENSES
December 31, | ||||||||
2021 | 2020 | |||||||
| ||||||||
Employees and payroll accruals | $ | 3,463 | $ | 2,714 | ||||
Accrued expenses | 315 | 716 | ||||||
Authorities | 327 | 415 | ||||||
Advances from customers | 1,739 | 1,263 | ||||||
Warranty provision | 243 | 250 | ||||||
Accrued royalties and rebate sales commissions | 421 | 1,200 | ||||||
Other | 451 | 133 | ||||||
| ||||||||
$ | 6,959 | $ | 6,691 | |||||
NOTE 13 -RELATED PARTIES’ TRANSACTIONS AND BALANCES
The amounts in the table below refer to TAT-Engineering joint venture and affiliates.
Transactions:
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
| ||||||||||||
Revenue - | ||||||||||||
Sales to related-party company (*) | $ | 88 | $ | 173 | $ | 596 | ||||||
Cost and expenses - | ||||||||||||
Supplies from related party (*) | $ | 654 | $ | 362 | $ | 552 | ||||||
Balances:
December 31, | ||||||||
2021 | 2020 | |||||||
| ||||||||
Trade receivables and other receivables (*) | $ | 799 | $ | 740 | ||||
Trade payables and other payables (*) | $ | 95 | $ | 122 | ||||
(*) includes mainly transactions with TAT-Engineering affiliated companies.
F - 35
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1114 -LONG-TERM EMPLOYEE-RELATED OBLIGATIONS
Severance pay:
The liability is presented on the undiscounted basis. The Israeli company records an expense for the net increase in its severance liability.
According to ‘Section 14’Section 14 of the Israeli Severance Pay lows,Law, the Israeli company’s liability for certain employees, according to their employment agreements, make regular deposits with certain insurance companies for accounts controlled by each applicable employee in order to secure the employee’s retirement benefit obligation. The Company and its Israeli subsidiary are fully relieved from any severance pay liability with respect to each such employee after it makes the payments on behalf of the employee. The liability accrued in respect of these employees and the amounts funded, as of the respective agreement dates, are not reflected in the Company balance sheet, as the amounts funded are not under the control and management of the Company and the pension or severance pay risks have been irrevocably transferred to the applicable insurance companies (the “Contribution Plan”).
With regard to the employees that are not under the “Contribution Plan”, the liability is funded in part from the purchase of insurance policies or by the establishment of pension funds with dedicated deposits in the funds. The amounts used to fund these liabilities are included in the balance sheets under “Funds in respect of employee rights upon retirement”.retirement.” These policies are the Company'sCompany’s assets. However, under employment agreements and subject to certain limitations, any policy may be transferred to the ownership of the individual employee for whose benefit the funds were deposited.
In the years ended December 31, 20152021, 2020 and 2014,2019 the Company deposited $389$778, $830 and $381,$1,096 respectively, with pension funds and insurance companies in connection with its severance payment obligations.
Limco-Piedmont sponsors a 401(K) safe harbor profit sharing plan covering substantially all of its employees. The plan requires the employer to contribute a match which is currently done on a payroll period basis, matching 100% of the first 2% and 50% of all salary deferrals made up to the next three percent.3%. In addition, the plan allows for a discretionary qualified non-elective contribution for the plan year. Contributions to the plan by Limco-Piedmont were $261, $251$349, $156 and $253$367 for the years ended December 31, 2015, 20142021, 2020 and 2013,2019, respectively.
The Group expects to contribute approximately $800$600 in 20162022 to the pension funds and insurance companies in respect of their severance and pension pay obligations.
The amounts of severance payments, actually paid to retired employees, by TAT were $166, $568$97, $380 and $226$689 for the years ended December 31, 2015, 20142021, 2020 and 2013.2019.
F - 36
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 14 -LONG-TERM EMPLOYEE-RELATED OBLIGATIONS (CONT)
TAT expects to pay $1,772$1,504 in future benefits to their employees during 20162022 through 20252031 upon their normal retirement age. The amount was determined based on the employee’s current salary rates and the number of service years that will be accumulated upon the retirement date. These amounts do not include amounts that might be paid to employees that will cease working for the Israeli company before their normal retirement age.
Year | Amount | |||
2022 | $ | 215 | ||
2023 | 63 | |||
2024 | 49 | |||
2025 | 55 | |||
2026 | 77 | |||
Thereafter (through 2030) | 1,045 | |||
Total | $ | 1,504 | ||
Year | Amount | |||
| 2016 | $ | 278 | ||
| 2017 | 45 | |||
| 2018 | 143 | |||
| 2019 | 367 | |||
| 2020 | 53 | |||
Thereafter (through 2025) | 886 | |||
| $ | 1,772 | |||
NOTE 1215 -COMMITMENTS AND CONTINGENT LIABILITIES
CONTINGENCIES
a.Commissions arrangements:
The Group is committed to pay marketing commissions ranging 1% to 10% to sale agents at an average rate of 6% of total sales contracts. Commission expenses were $678, $701$423, $528 and $781$694 for the years ended December 31, 2015, 20142021, 2020 and 2013,2019, respectively. The commissions were recorded as part of the selling and marketing expenses.
b. Royalty commitments: (1)TAT is committed to pay royalties to third parties, |
(2)Piedmont is committed to pay royalties to a third party, ranging 5% to 13% of sales of products purchased from TAT Industries until 2020. Lease expense totaled $667, $427the third party. That third party is the exclusive manufacturer of the products for which Piedmont provides MRO services.
In addition, Piedmont is committed to pay another third party royalties of 10% to 20%, on parts reclaimed to use in MRO services or sold to our customers when they are manufactured by the third party. Royalty expenses were $2,245, $1,648 and $424$2,310 for the years ended December 31, 2015, 2014,2021, 2020 and 20132019, respectively.
c. Guarantees:
(1)In order to secure TAT's liability to the Israeli customs, the Company provided bank guarantees in amounts of $40, $64 and $32. The guarantees are linked to the consumer price index and is valid until January 2022, March 2022 and January 2023, respectively.
(2)To secure TAT's liability to the lessor of its premises, the Company provided a bank guarantee in the amount of $930. The guarantee is linked to American US dollar and it's valid until June 2022.
Year | Amount | ||
| 2016 | $ | 1,170 | |
| 2017 | 1,085 | ||
| 2018 | 1,022 | ||
| 2019 | 1,036 | ||
2020 | 1,069 | ||
| Total | $ | 5,382 | |
F - 37
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | ||
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | ||
U.S. dollars in thousands |
NOTE 1316 -SHAREHOLDERS' EQUITY
a.TAT's Ordinary shares confer upon their holders voting rights, the right to receive dividends, if declared, and any amounts payable upon the dissolution, liquidation or winding up of the affairs of TAT.
TAT's Treasure shares have no rights.
b.Stock option plans:
Following the approval of TAT's Audit Committee and Board of Directors, on June 28, 2012, the Company’s shareholders approved the 2012 stock option plan (the “2012 Plan”) to grant up to 380,000 options to purchase Ordinary shares, 0.9 NIS par value, of the Company to senior executives and certain members of the Board of Directors, at an exercise price as determined in the stock option plan. The option pool was increased twice by 300,000 to an aggregate option pool of 980,000(*) options following the approvals of the Company's Audit Committee, Board of Directors and shareholders. In general, the Options vest over a period of 4 years as follows: 25% of the Options vest upon the lapse of 12 months following the date of grant and the remaining 75% vest on a quarterly basis over the remaining 3-year period. The grant of options to Israeli employees under the Plan is subject to the terms stipulated by Sections 102 and 102A of the Israeli Income Tax Ordinance. Each option grant is subject to the track chosen by the Company, either Section 102 or Section 102A of the Israeli Income Tax Ordinance, and pursuant to the terms thereof, the Company is not allowed to claim as an expense for tax purposes the amounts credited to employees as benefits, including amounts recorded as salary benefits in the Company’s accounts, in respect of options granted to employees under the Plan, with the exception of the work income benefit component, if any, determined on grant date. For nonemployees and for non-Israeli employees, the share option plan is subject to Section 3(i) of the Israeli Income Tax Ordinance.
(*) of which 821,982 options are approved by the Tel Aviv Stock Exchange to be allocated to grantees.
F - 38
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | ||
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | ||
U.S. dollars in thousands |
NOTE 16 -SHAREHOLDERS' EQUITY (CONT)
b.Stock option plans (cont.):
On August 30, 2018 the Company's compensation committee, followed by the Board of Directors, approved the amended and restated company's 2012 Plan. On October 4, 2018 the company's amended and restated 2012 stock plan was approved at the annual general meeting of shareholders.
As part of the company's 2012 Plan’s amendments it was determined that if the Company declares a cash dividend to its shareholders, and the distribution date of such dividend will precede the exercise date of an Option, including for the avoidance of doubt, Options that have yet to become vested and Options which have been granted prior to the adoption of such amendment to the plan, the exercise price of the Option shall be reduced in the amount equal to the cash dividend per share distributed by the Company. The result of the modification was an incremental cost of $74 in the financial statement for 2018.
During 2018 the option pool was increased by 300,000 to an aggregate option pool of 980,000(*) options following the approvals of the Company's Audit Committee, Board of Directors and shareholders of the company.
(1)On August 29, 2019, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 50,000 Options, at an exercise price of $5.65 per share, to senior executives.
(2)On September 22, 2019, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 50,000 Options, at an exercise price of $5.32 per share, to senior executive.
(3)On September 26, 2019, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 50,000 Options, at an exercise price of $5.26 per share, to senior executive.
(4)On October 15, 2020, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 50,000 Options, at an exercise price of $4.58 per share, to senior executive.
(5)On March 30, 2021, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 25,000 Options, at an exercise price of $5.91 per share, to senior executive.
(6)On March 30, 2021, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 25,000 Options, at an exercise price of $5.91 per share, to senior executive.
(7)On March 30, 2021, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 25,000 Options, at an exercise price of $5.91 per share, to senior executive.
(8)On March 30, 2021, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 25,000 Options, at an exercise price of $5.91 per share, to senior executive.
(9)On July 25, 2021, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 20,000 Options, at an exercise price of $6.41 per share, to senior executive.
(10)On August 30, 2021, pursuant to the 2012 Plan, TAT’s Board of Directors approved the grant of 100,000 Options, at an exercise price of $7 per share, to senior executive.
F - 39
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1316 - �� SHAREHOLDERS' EQUITY (CONT)
b.Stock option plans (cont.):
The fair value of the Company’s stock options granted under the 2012 plan for the years ended December 31, 20152021, 2020 and 20142019 was estimated using the following assumptions:
2021 | 2020 | 2019 | ||||
| ||||||
Expected stock price volatility | 45.6% – 52% | 44.7% – 43.5% | 34.2% – 36.8% | |||
Expected option life (in years) | 3.5-5 | 3.5-5 | 3.5-5 | |||
Risk free interest rate | 0.1% – 0.64% | 0.12% – 0.25% | 1.44% – 1.63% | |||
Dividend yield | 0% | 0% | 0% |
| 2015 | 2014 | |||||||
| Expected stock price volatility | 35.07% - 38.97 | % | 37.23% - 39.14 | % | ||||
| Expected option life (in years) | 3 - 4 | 2.87 - 4 | ||||||
| Risk free interest rate | 0.92% - 1.39 | % | 0.48% - 1.34 | % | ||||
| Dividend yield | 5 | % | 5% - 4.6 | % | ||||
The Company uses the Black-Scholes option pricing model to determine the weighted average fair value of options. The volatility factor used in the Black-Scholes option pricing model is based on historical stock price fluctuations. The expected term of options is based on the simplified method. The Company is able to use the simplified method as the options qualify as “plain vanilla” options as defined by ASC 718-10-S99 and since the Company does not have sufficient historical exercise data to provide a reasonable basis to estimate expected term. Expected dividend yield is based upon historical and projected dividend activity and the risk-free interest rate assumption is based on observed interest rates appropriate for the expected term of the stock options granted.
F - 40
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1316 -SHAREHOLDERS' EQUITY (CONT)
b.Stock option plans (cont.):
The following table is a summary of the activity of TAT's Stock Option plan:
Year ended December 31, | Year ended December 31, | Year ended December 31, | ||||||||||||||||||||||
2021 | 2020 | 2019 | ||||||||||||||||||||||
Number of options | Weighted average exercise price | Number of options | Weighted average exercise price | Number of options | Weighted average exercise price | |||||||||||||||||||
| ||||||||||||||||||||||||
Outstanding at the beginning of the year | 621,460 | $ | 7.26 | 571,460 | $ | 7.53 | 528,268 | $ | 9.03 | |||||||||||||||
Granted | 220,000 | 6.45 | 50,000 | 4.58 | 170,000 | 5.44 | ||||||||||||||||||
Forfeited | (121,460 | ) | 8.9 | 0- | 0- | (126,808 | ) | 11.19 | ||||||||||||||||
Exercised | 0- | 0- | 0- | 0- | 0- | 0- | ||||||||||||||||||
| ||||||||||||||||||||||||
Outstanding at the end of the year | 720,000 | 6.8 | 621,460 | 7.26 | 571,460 | 7.53 | ||||||||||||||||||
| ||||||||||||||||||||||||
Exercisable at the end of the year | 379,375 | $ | 7.44 | 381,629 | $ | 7.91 | 264,389 | $ | 7.74 | |||||||||||||||
| Year ended December 31, | Year ended December 31, | Year ended December 31, | ||||||||||||||||||||||
2015 | 2014 | 2013 | ||||||||||||||||||||||
Number of options | Weighted average exercise price | Number of options | Weighted average exercise price | Number of options | Weighted average exercise price | |||||||||||||||||||
| Outstanding at the beginning of the year | 235,000 | 8.28 | 145,000 | $ | 6.5 | 285,000 | $ | 6.50 | ||||||||||||||||
| Granted | 120,000 | 7.15 | 215,000 | 8.66 | - | - | ||||||||||||||||||
| Forfeited | (77,500 | ) | 8.67 | (40,000 | ) | 8.79 | (133,334 | ) | 6.50 | |||||||||||||||
| Exercised | - | - | (85,000 | ) | 6.5 | (6,666 | ) | 6.50 | ||||||||||||||||
| Outstanding at the end of the year | 277,500 | 7.6 | 235,000 | 8.28 | 145,000 | $ | 6.50 | |||||||||||||||||
| Exercisable options | 30,000 | 6.5 | 20,000 | $ | 6.5 | 24,167 | $ | 6.50 | ||||||||||||||||
The weighted-average grant-date fair value of options granted was $1.92 in 2015 was $1.252021, $1.41 in 2020 and $1.13$1.35 in 2014.2019. The aggregate intrinsic value for the options outstanding as of December 31, 2015, 20142021, 2020 and 20132019 was $27,$0, $0 and $212,$0, respectively.
As of December 31, 20152021, total unrecognized compensation cost was $67$632 and is expected to be recognized over a weighted-average period of 1.413.97 years.
F - 41
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1417 -EARNINGS (LOSS) PER SHARE (“EPS”)
Basic and diluted earnings (loss) per share are based on the weighted average number of ordinary shares outstanding. Diluted EPS is based on those shares used in basic EPS plus shares that would have been outstanding assuming issuance of ordinary shares for all dilutive potential ordinary shares outstanding.
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Numerator for EPS: | ||||||||||||
Net income (loss) | $ | (3,562 | ) | $ | (5,329 | ) | $ | 806 | ||||
Denominator for EPS: | ||||||||||||
Weighted average shares outstanding – basic | 8,874,696 | 8,874,696 | 8,874,696 | |||||||||
Dilutive shares | 0- | 0- | 0- | |||||||||
Weighted average shares outstanding – diluted | 8,874,696 | 8,874,696 | 8,874,696 | |||||||||
EPS: | ||||||||||||
Basic and diluted | $ | (0.4 | ) | $ | (0.6 | ) | $ | 0.1 | ||||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
| Numerator for EPS: | ||||||||||||
| Net income from continuing operations | $ | 5,849 | $ | 1,432 | $ | 5,231 | ||||||
| Net loss from discontinued operations, net of tax | - | - | (2,429 | ) | ||||||||
| Denominator for EPS: | ||||||||||||
| Weighted average shares outstanding – basic | 8,808,344 | 8,805,495 | 8,799,237 | |||||||||
| Dilutive shares | 2,345 | 21,047 | 9,683 | |||||||||
| Weighted average shares outstanding – diluted | 8,810,689 | 8,826,542 | 8,808,920 | |||||||||
| EPS attributable to controlling interest: | ||||||||||||
| Basic and diluted | ||||||||||||
| Net income from continuing operations | $ | 0.66 | $ | 0.16 | $ | 0.60 | ||||||
| Loss from discontinued operations | $ | - | $ | - | $ | (0.28 | ) | |||||
Diluted income per share does not include 295,000, 175,000720,000, 621,460 and 0482,282 options, for the years ended December 31, 2015, 20142021, 2020 and 20132019 respectively because the options are anti-dilutive.
Dilutive shares are calculated using the treasury stock method and include dilutive shares from share-based employee compensation plans.
NOTE 18 -DISCONTINUED OPERATION
In June 2020, the company's management decided to discontinue the JT8D engine blades reconditioning activity as part of a strategic change in its business to focus on new capabilities to provide services to newer types of engines. The discontinued operation is related to the JT8D engine blades reconditioning activity in Turbochrome, which constitute a material portion of Turbochrome’s revenues.
2021 | 2020 | |||||||||
Assets: | ||||||||||
Account receivables | $ | 0- | $ | 0- | ||||||
Inventory | 0- | 0- | ||||||||
Fixed assets, net | 0- | 0- | ||||||||
Costumers’ relationship | 0- | 0- | ||||||||
Total Assets | $ | 0- | $ | 0- | ||||||
Liability: | ||||||||||
Account payables | $ | 0- | $ | 179 | ||||||
| ||||||||||
Total Liabilities | $ | 0- | $ | 179 | ||||||
F - 42
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 18 -DISCONTINUED OPERATION (CONT)
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
| ||||||||||||
Revenue: | ||||||||||||
Services | $ | 440 | $ | 955 | $ | 4,553 | ||||||
| ||||||||||||
Cost of revenue: | ||||||||||||
Services | 429 | 1,062 | 4,291 | |||||||||
| ||||||||||||
Gross profit (loss) | 11 | (107 | ) | 262 | ||||||||
| ||||||||||||
Operating expenses: | ||||||||||||
Research and development, net | 16 | 42 | (39 | ) | ||||||||
Selling and marketing | 29 | 90 | 330 | |||||||||
General and administrative | 68 | 191 | 598 | |||||||||
| ||||||||||||
113 | 323 | 889 | ||||||||||
| ||||||||||||
Operating income (loss) | (102 | ) | (430 | ) | (627 | ) | ||||||
| ||||||||||||
Financial expenses (income) | 0- | 0- | 28 | |||||||||
Income (loss) on disposal of discontinued operation (1) | 529 | (1,415 | ) | 0- | ||||||||
| ||||||||||||
Net Income (loss) | $ | 427 | $ | (1,845 | ) | $ | (655 | ) | ||||
(1) | During 2020, the Company wrote off the following assets belonging to the discontinued operation: Inventory of $464, Accounts receivable of $233, Fixed assets of $363 and Customers' relationships of $355. During 2021 the company was succeeded to collect and sell some of the account receivable and inventory that were written off in total amount of $529. |
F - 43
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1519 -TAXES ON INCOME
a.Tax benefits under the Law for the Encouragement of Capital Investments, 1959 ("the Law"):
Until December 31,2010,31, 2010, TAT and Turbochrome has elected to participate in the alternative package of tax benefits for its approved and benefited enterprise under the law.
Pursuant to such Law, the income derived from those enterprises will be exempt from Israeli corporate tax for a specified benefit period (except to the extent that dividends are distributed during the tax-exemption period other than upon liquidation) and subject to reduced corporate tax rates for an additional period.
In addition pursuant to a recent amendment of the event ofLaw, any distribution of a dividend fromas of August 15, 2021 will be prorated between exempt income which was tax exempt as above,and taxable income. As such, upon dividend distribution, in case the company would havehas accumulated exempt income, the company will be obligated to pay corporate taxes at the rate of 25% tax in respect of the amount distributed. As of December 31, 2015, the company had accumulated a total amount of approximately $1,723 of exempt income which will be charged for $431 of the corporate income tax if will be distributed as dividend.
it was exempted from with respect to the exempt profits portion.
Preferred Enterprises
Additional amendments to the Law became effective in January 2011 (the “2011 Amendment”). Under the 2011 Amendment, income derived by ‘Preferred Companies’ from ‘Preferred Enterprises’ (both as defined in the 2011 Amendment) would be subject to a uniform rate of corporate tax as opposed to the current incentives that are limited to income from Approved or Benefiting Enterprises during their benefits period. According to the 2011 Amendment, the uniform tax rate on such income, referred to as ‘Preferred Income’, would be 10%6% in areas in Israel that are designated as Development Zone A and 15%12% elsewhere in Israel during 2011-2012, 7% and 12.5%, respectively, in 2013-2014, and 6% and 12%, respectively, thereafter. As with dividendsIsrael. Dividends distributed from taxable income derived from an Approved or Benefited Enterprises during the applicable benefits period, dividends distributed from Preferred IncomeEnterprise would be subject to a 15% tax (or lower, if so provided under an applicable tax treaty), which would generally be withheld by the distributing company. While the Company may incur additional tax liability in the event of distribution of dividends from tax exempt income generated from its Approved and Benefiting Enterprises, no additional tax liability will be incurred by the Company in the event of distribution of dividends from income taxed in accordance with the 2011 Amendment.
Under the transitional provisions of the 2011 Amendment, the Company elected to irrevocably implement the 2011 Amendment, commencing 2011 and thereafter, and be regarded as a "Preferred Enterprise" with respect to its existing Approved and Benefited Enterprises while waiving benefits provided under the legislation prior to the 2011 Amendment.
F - 4344
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 15- 19 -TAXES ON INCOME (CONT)
a.Tax benefits under the Law for the Encouragement of Capital Investments, 1959 ("the Law") (cont.):
Under a recent amendment, announced in August 2013, beginning in 2014, dividends paid out of income attributed to a Preferred Enterprise will be subject to a withholding tax rate of 20% (instead of 15%). In addition, tax rates under the Preferred Enterprise were also raised effective as of January 1, 2014 to 9% in Zone A and 16% elsewhere (instead.
The uniform tax rate for Development Zone A, as of the 6% and 12%, respectively)January 1, 2017, is 7.5% (as part of changes enacted in Amendment 73).
TAT is located in an area in Israel that is designated as elsewhere and as such entitled to reduce tax rates of 15% during 2011-2012, 12.5% in 2013, and 16% in 2014 and thereafter.
.
Turbochrome is located in an area in Israel that is designated as Zone A and as such entitled to reduce tax rates of 10% during 2011-2012, 7%7.5%.
b.Corporate tax rate in 2013, and 9% in 2014 and thereafter.
Israel
The taxable income of the Israeli companiesTAT, not subject to benefits as detailed above, is taxed in Israel at the regular corporate tax rates which were 25% in 2013 and 26.5% for 2014 and 2015.
statements.
Capital gain is subject to capital gain tax according to corporate tax rate in the year which the assets are sold.
sold
TAT-GAL which was incorporated in 2008 has not received final2017.F - 44
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousandsNOTE 15 - TAXES ON INCOME (CONT)
c.U.S. subsidiaries
U.S. subsidiaries are taxed based on federal and state tax laws. The Federal statutory tax rate for 2015, 2014,2021, 2020 and 20132019 was 38%.21% plus 3%-6% for state taxes.
F - 45
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES | ||
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS | ||
U.S. dollars in thousands |
NOTE 19 -TAXES ON INCOME (CONT)
d.Tax assessments
TAT’s income tax assessments are considered final through 2011.
2016.
Turbochrome income tax assessments are considered final through 2013.
2016.
Limco-Piedmont income tax assessments are considered final through 2011.
e.Income tax assessment yet.
reconciliation:
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT does not intend
TAT does not intend to distribute tax-exempt earnings deriving from its Approved Enterprise aggregating approximately $1,723 as of December 31, 2015, and accordingly, no deferred tax liability has been established related to these earnings. If such tax-exempt income is distributed, it would be taxed at the reduced corporate tax rate applicable to such profits (25%) and an income tax liability of up to approximately $431 would be incurred as of December 31, 2015.$2,434.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
CODM reviews revenue, gross profit, operating income and the following assets: cash and cash equivalents, accounts receivable and inventory.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
A reconciliation of the theoretical tax expense assuming all income is taxed at the statutory rate to taxes on income (tax benefit) as reported in the statements of income:
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Income (loss) before taxes on income (tax benefit) from continued operationas reported in the statements of income | $ | (4,575 | ) | $ | (4,816 | ) | $ | 2,182 | ||||
| ||||||||||||
Statutory tax rate in Israel | 23 | % | 23 | % | 23 | % | ||||||
| ||||||||||||
Theoretical taxes on income (tax benefit) | $ | (1,052 | ) | $ | (1,108 | ) | $ | 501 | ||||
| ||||||||||||
Increase (decrease) in taxes on income resulting from: | ||||||||||||
Tax adjustment for foreign subsidiaries subject to a different tax rate | 75 | 50 | (26 | ) | ||||||||
Reduced tax rate on income derived from "Preferred Enterprises" plans | 149 | 580 | 204 | |||||||||
Earnings from foreign subsidiaries (1) | 0- | (2,338 | ) | 91 | ||||||||
Valuation allowance for exchange rates differences on deferred taxes not recorded on capital losses | 0- | 0- | (125 | ) | ||||||||
Deferred tax assets from discontinued operation profit (loss) | 98 | (138 | ) | (49 | ) | |||||||
Reduced deferred tax asset from expecting utilization of carryforward losses | 0- | 1,984 | 0- | |||||||||
Tax in respect of prior years | 24 | (345 | ) | 0- | ||||||||
Temporary differences for which no deferred taxes were recorded | 0- | (377 | ) | (55 | ) | |||||||
Permanent differences | 71 | 24 | 55 | |||||||||
Other adjustments | (27 | ) | 151 | (7 | ) | |||||||
Taxes on income (tax benefit) as reported in the statements of income | $ | (662 | ) | $ | (1,517 | ) | $ | 589 | ||||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
| Income before taxes on income as reported in the statements of income | $ | 5,256 | $ | 2,525 | $ | 5,247 | ||||||
| Statutory tax rate in Israel | 26.5 | % | 26.5 | % | 25 | % | ||||||
| Theoretical taxes on income | $ | 1,393 | $ | 669 | $ | 1,312 | ||||||
| Increase (decrease) in taxes on income resulting from: | ||||||||||||
| Tax adjustment for foreign subsidiaries subject to a different tax rate | 224 | 457 | 453 | |||||||||
| Reduced tax rate on income derived from "Preferred Enterprises" plans | 146 | 156 | (255 | ) | ||||||||
| Change in enacted tax rates | - | - | 34 | |||||||||
| Exempt income (Bargain purchase) | (1,281 | ) | - | - | ||||||||
| Valuation allowance | (75 | ) | (100 | ) | 294 | |||||||
| Tax in respect of prior years | (12 | ) | (44 | ) | (342 | ) | ||||||
| Permanent differences | 249 | 222 | (455 | ) | ||||||||
| Taxes on income as reported in the statements of income | $ | 644 | $ | 1,360 | $ | 1,041 | ||||||
| Year ended December 31, | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| Domestic (Israel) | $ | 3,840 | $ | (1,659 | ) | $ | 1,942 | |||||
| Foreign (United States) | 1,416 | 4,184 | 3,305 | |||||||||
| $ | 5,256 | $ | 2,525 | $ | 5,247 | |||||||
(1)The Company record an accrual that related to a deferred tax liability due to the possibility of future distribution of earnings from foreign subsidiaries of the Company.
During 2020 and 2021, the Company received loans from commercial banks in the US and Israel in total amount of $6 million. As part of the loan terms, the company cannot distribute dividends to its shareholders during the next five years. Therefore, the company wrote off the differed tax liability in 2020.
F - 4546
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1519 -TAXES ON INCOME (CONT)
f.Income (loss) before taxes on income (tax benefit) is comprised as follows:
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
| ||||||||||||
Domestic (Israel) | $ | (5,139 | ) | $ | (4,499 | ) | $ | (1,931 | ) | |||
Foreign (United States) | 564 | (317 | ) | 4,113 | ||||||||
| ||||||||||||
| $ | (4,575 | ) | $ | (4,816 | ) | $ | 2,182 | ||||
g.Taxes on income (tax benefit) included in the statements of income:
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Current: | ||||||||||||
Domestic (Israel) | $ | 0- | $ | 0- | $ | 0- | ||||||
Foreign (United States) | 0- | 0- | 181 | |||||||||
| ||||||||||||
0- | 0- | 181 | ||||||||||
Deferred: | ||||||||||||
Domestic (Israel) | (579 | ) | (683 | ) | (397 | ) | ||||||
Foreign (United States) | (107 | ) | (489 | ) | 805 | |||||||
| ||||||||||||
(686 | ) | (1,172 | ) | 408 | ||||||||
Previous years: | ||||||||||||
Domestic (Israel) | 0- | (134 | ) | |||||||||
Foreign (United States) | 24 | (211 | ) | 0- | ||||||||
| ||||||||||||
- | (345 | ) | 0- | |||||||||
| ||||||||||||
$ | (662 | ) | $ | (1,517 | ) | $ | 589 | |||||
| Year ended December 31, | ||||||||||||
| 2015 | 2014 | 2013 | ||||||||||
| Current: | ||||||||||||
| Domestic (Israel) | $ | 225 | $ | (94 | ) | $ | 160 | |||||
| Foreign (United States) | 452 | 237 | 334 | |||||||||
| 677 | 143 | 494 | ||||||||||
| Deferred: | ||||||||||||
| Domestic (Israel) | (170 | ) | (36 | ) | 15 | |||||||
| Foreign (United States) | 149 | 1,297 | 874 | |||||||||
| (21 | ) | 1,261 | 889 | |||||||||
| Previous years: | ||||||||||||
| Domestic (Israel) | - | - | (209 | ) | ||||||||
| Foreign (United States) | (12 | ) | (44 | ) | (133 | ) | ||||||
| (12 | ) | (44 | ) | (342 | ) | |||||||
| $ | 644 | $ | 1,360 | $ | 1,041 | |||||||
F - 4647
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1519 -TAXES ON INCOME (CONT)
h.Deferred income taxes:
Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of TAT's deferred tax liabilities and assets are as follows:
December 31, | ||||||||
2021 | 2020 | |||||||
Deferred tax assets: | ||||||||
Provision for current expected credit losses | $ | 95 | $ | 41 | ||||
Provisions for employee benefits | 495 | 272 | ||||||
Inventory | 1,212 | 987 | ||||||
Capital tax losses carryforward | 3,500 | 3,500 | ||||||
Net operating losses carryforward | 3,084 | 3,017 | ||||||
Other | 326 | 224 | ||||||
Deferred tax assets, before valuation allowance | $ | 8,712 | $ | 8,041 | ||||
Valuation allowance | (5,484 | ) | (5,484 | ) | ||||
Deferred tax assets, net | $ | 3,228 | $ | 2,557 | ||||
| ||||||||
Deferred tax liabilities: | ||||||||
Property, plant and equipment | (1,542 | ) | (1,647 | ) | ||||
Intangible assets | (434 | ) | (318 | ) | ||||
Other temporary differences deferred tax liabilities | 0- | (26 | ) | |||||
Deferred tax liabilities | $ | (1,976 | ) | $ | (1,991 | ) | ||
| ||||||||
Net | $ | 1,252 | $ | 566 | ||||
December 31, | ||||||||
2015 | 2014 | |||||||
| Deferred tax assets (liabilities): | ||||||||
| Provision for doubtful accounts | $ | 100 | $ | 47 | ||||
| Unrealized gains | 140 | 174 | ||||||
| Provisions for employee benefits | 300 | 259 | ||||||
| Inventory | 1,114 | 957 | ||||||
| Goodwill and intangible assets | 462 | 533 | ||||||
| Property, plant and equipment | 21 | |||||||
| Provisions for employee benefits and other temporary differences | 36 | 26 | ||||||
| Tax credits carryforward | 693 | 558 | ||||||
| Capital and state tax losses carryforward | 3,449 | 3,574 | ||||||
| Net operating losses carryforward | 553 | 373 | ||||||
| Other | 204 | 296 | ||||||
| Deferred tax assets, before valuation allowance | $ | 7,051 | 6,818 | |||||
| Valuation allowance | (3,449 | ) | (3,574 | ) | ||||
| Deferred tax assets, net | $ | 3,602 | $ | 3,244 | ||||
| Property, plant and equipment and intangible assets | (2,473 | ) | (1,735 | ) | ||||
| Other temporary differences deferred tax liabilities | (501 | ) | (630 | ) | ||||
| Deferred tax liabilities | $ | (2,974 | ) | $ | (2,365 | ) | ||
| Net | 628 | 879 | ||||||
F - 4748
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1519 -TAXES ON INCOME (CONT)
h.Deferred income taxes (cont.):
The following table summarizes the changes in the valuation allowance for deferred tax assets:
Balance, December 31, 2018 | $ | 3,375 | ||
Additions during the year | 125 | |||
Balance, December 31,2019 | $ | 3,500 | ||
Additions during the year | 1,984 | |||
Balance, December 31,2020 | $ | 5,484 | ||
Additions during the year | 0- | |||
Balance, December 31,2021 | $ | 5,484 |
| Balance, December 31, 2012 | 1,823 | |||
| Addition charged to expenses | 1,483 | |||
| Balance, December 31,2013 | 3,306 | |||
| Addition charged to expenses | 268 | |||
| Balance, December 31,2014 | 3,574 | |||
Deductions charged to expenses | (125 | ) | ||
| Balance, December 31,2015 | $ | 3,449 |
Valuation allowances are mainly related to distribute earnings(i) U.S. subsidiary for which valuation allowance was provided in respect of a foreign subsidiary aggregating up to approximately $17,601 (tax earnings and profits) as of December 31, 2015, and accordingly, no deferred tax liability has been established relativeassets resulting from carryforward of State tax losses in the amount of $ 1,519. That amount is expected to these earnings. If such profitsexpire gradually starting from 2024 and earnings are distributed by cash dividend, it would be taxed at tax rate applicable(ii) Capital losses attributed to such distribution (12.5%) and anthe Company in the amount of $ 1,502. (iii) corporate income tax liabilitylosses carryforward incurred in TAT Gedera in amount of up to approximately $2,200 would be incurred as of December 31, 2015.
F - 4849
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1620 -SEGMENT INFORMATION
a.Segment Activities Disclosure:
TAT operates under four segments: (i) Original Equipment Manufacturing or “OEM”equipment manufacturing (“OEM”) of Heat Transfer Solutionsheat transfer solutions and Aviation Componentsaviation accessories mainly through our Gedera facility and our Limco subsidiary; (ii) Heat Transfer ServicesMRO services for heat transfer components and ProductsOEM of heat transfer solutions through its Limco subsidiary; (iii) MRO services for aviation components (mainly APU and LG) through its Piedmont subsidiary; and (iv) Overhaul and coating of jet engine components through its Turbochrome subsidiary.
-OEM of heat transfer solutions and aviation accessories primarily include the design, development and manufacture of (i) broad range of heat transfer solutions, such as pre-coolers heat exchangers and oil/fuel hydraulic heat exchangers, used in mechanical and electronic systems on board of commercial, military and business aircraft; (ii) environmental control and power electronics cooling systems installed on board aircraft in and ground applications; and (iii) Maintenance, Repaira variety of other mechanical aircraft accessories and Overhaul or “MRO”systems such as pumps, valves, and turbine power units.
-MRO Services for heat transfer components and OEM of heat transfer solutions primarily include the MRO of heat transfer components and to a lesser extent, the manufacturing of certain heat transfer solutions. TAT’s Limco subsidiary operates an FAA-certified repair station, which provides heat transfer MRO services for Aviation Componentsairlines, air cargo carriers, maintenance service centers and the military.
-MRO services for aviation components include the MRO of APUs, landing gears and other aircraft components, as well as APU lease activity. TAT’s Piedmont subsidiary operates an FAA-certified repair station, which provides aircraft component MRO services for airlines, air cargo carriers, maintenance service centers and the military.
-TAT’s activities in the area of landing gears and APUs (iv) overhaul and coating of jet engine components.
components includes the overhaul and coating of jet engine components, including turbine vanes and blades, fan blades, variable inlet guide vanes and afterburner flaps. The discontinued operation regarding to the JT8D activity is part of the coating jet engines component segment thus the numbers for this segment were reclassified due to discontinued operation for the year 2019.
The Group’s chief operating decision-maker (CEO of the Company) evaluates performance, makes operating decisions and allocates resources based on financial data, consistent with the presentation in the accompanying financial statements.
During 2021 TAT executed and continue to work on the company's plan to consolidate the Company’s operations from four to three production sites by consolidating its production sites in Israel “OEM of heat transfer solutions and aviation accessories” with the “overhaul and coating of jet engine activity” and transferring the heat exchanges cores production operations from Israel to the Company’s production site in Tulsa, Oklahoma.
F - 4950
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1620 -SEGMENT INFORMATION (CONT)
b.Segments statement operations disclosure:
The following financial information is the information that managementCODM uses for analyzing the segment results. The figures are presented in consolidated method as presented to management.
CODM.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
(*) Excluding discontinued operations for the year ended on December 31, 2013.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
(*) Excluding discontinued operations for the year ended on December 31, 2013.
No single customer accounted for 10% or more of Group's total net revenue in any year presented.
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousands
NOTE 19 - REVISION
During 2015, the Company identified an error related to the classification of US employees' social benefits expenses and the balance classification of deferred tax asset and liabilities. Previously, the Company classified these expenses in ‘general and administrative expenses’ instead of classifying a part of them in ‘Cost of goods’ (product and services) for employees allocated to this line item. This change in classification also impacted the capitalization of inventory balances. The change in deferred taxes was to properly adjust deferred tax assets and liabilities on a jurisdictional basis. There was no material impact on the statement of cash flows.The revision impacts two segments, Heat Transfer Services and Products and OEM of Heat Transfer Solutions and Aviation Components.
The Company assessed the materiality of this error in accordance with the SEC’s Staff Accounting Bulletin 99 and Accounting Standards Codification Topic 250, Accounting Changes and Error Corrections, and concluded that the previously issued financial statements were not materially misstated. In accordance with the SEC’s Staff Accounting Bulletin, the Company corrected these errors by revising the affected financial statements in the current 2015 financial statements.F - 55
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousandsNOTE 19 - REVISION (CONT)
Following is the effect of the revision on the Company’s previously reported results:Statements of income:
*Represents an amount less than $1.
*Represents an amount less than $1.F - 56
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
U.S. dollars in thousandsNOTE 19 - REVISION (CONT)
Following is the effect of the revision on the Company’s previously reported results (cont.):
Balance sheets and shareholders' capitalAs of December 31, 2014:
* See note 2 (dd)
F - 57
The following financial information is a summary of the operating income of each operational segment:
Year ended December 31, 2021 | ||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Accessories | MRO Services for heat transfer components and OEM of heat transfer solutions | MRO services for Aviation Components and Lease | Overhaul and coating of jet engine components | Elimination of inter-company sales | Consolidated | |||||||||||||||||||
Revenues | ||||||||||||||||||||||||
Sale of products and services | $ | 22,238 | $ | 18,669 | $ | 33,232 | $ | 3,834 | $ | 0- | $ | 77,973 | ||||||||||||
Intersegment revenues | 3,739 | 177 | 0- | 0- | (3,916 | ) | 0- | |||||||||||||||||
Total revenues | 25,977 | 18,846 | 33,232 | 3,834 | (3,916 | ) | 77,973 | |||||||||||||||||
| ||||||||||||||||||||||||
Cost of revenues | 24,044 | 16,922 | 26,444 | 2,978 | (3,685 | ) | 66,703 | |||||||||||||||||
Gross profit | 1,933 | 1,924 | 6,788 | 856 | (231 | ) | 11,270 | |||||||||||||||||
| ||||||||||||||||||||||||
Research and development | 122 | 80 | 202 | 160 | (47 | ) | 517 | |||||||||||||||||
Selling and marketing | 2,040 | 1,015 | 1,961 | 220 | (89 | ) | 5,147 | |||||||||||||||||
General and administrative | 3,128 | 1,855 | 3,004 | 558 | (191 | ) | 8,354 | |||||||||||||||||
Other expenses (income) | (913 | ) | 0- | (432 | ) | (19 | ) | 896 | (468 | ) | ||||||||||||||
Restructuring expenses, net | 1,338 | 386 | 0- | 31 | 0- | 1,755 | ||||||||||||||||||
| ||||||||||||||||||||||||
Operating income (loss) | $ | (3,782 | ) | $ | (1,412 | ) | $ | 2,053 | $ | (94 | ) | $ | (800 | ) | $ | (4,035 | ) | |||||||
Financial expenses, net | 540 | |||||||||||||||||||||||
Loss before tax benefits | (4,575 | ) | ||||||||||||||||||||||
| Year ended December 31, 2015 | ||||||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Components | Heat Transfer Services and Products | MRO services for Aviation Components | Overhaul and coating of jet engine components | Other | Elimination of inter-company sales | Consolidated | ||||||||||||||||||||||
| Revenues | ||||||||||||||||||||||||||||
| Sale of products and services | $ | 23,511 | $ | 30,526 | $ | 29,665 | $ | 1,905 | $ | - | $ | 85,607 | ||||||||||||||||
| Intersegment revenues | 3,840 | 475 | - | - | (4,315 | ) | - | |||||||||||||||||||||
| Total revenues | 27,351 | 31,001 | 29,665 | 1,905 | (4,315 | ) | 85,607 | |||||||||||||||||||||
| Cost of revenues | 23,887 | 22,541 | 28,474 | 1,485 | (4,445 | ) | 71,942 | |||||||||||||||||||||
| Gross profit | 3,464 | 8,460 | 1,191 | 420 | 130 | 13,665 | ||||||||||||||||||||||
| Research and development | 619 | 264 | 7 | 890 | ||||||||||||||||||||||||
| Selling and marketing | 1,270 | 961 | 608 | 64 | 2,903 | |||||||||||||||||||||||
| General and administrative | 1,880 | 3,000 | 3,303 | 286 | 8,469 | |||||||||||||||||||||||
| Other expenses | 631 | 631 | ||||||||||||||||||||||||||
| Gain on bargain purchase | (4,833 | ) | (4,833 | ) | ||||||||||||||||||||||||
| Operating income (loss) | (305 | ) | 4,235 | (2,720 | ) | 63 | (4,202 | ) | 130 | 5,605 | ||||||||||||||||||
F - 5051
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1620 -SEGMENT INFORMATION (CONT)
b.Segments statement operations disclosure (cont.)
Year ended December 31, 2020 | ||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Accessories | MRO Services for heat transfer components and OEM of heat transfer solutions | MRO services for Aviation Components and lease | Overhaul and coating of jet engine components | Elimination of inter-company sales | Consolidated | |||||||||||||||||||
Revenues | ||||||||||||||||||||||||
Sale of products and services | $ | 20,179 | $ | 20,445 | $ | 31,189 | $ | 3,546 | $ | 0- | $ | 75,359 | ||||||||||||
Intersegment revenues | 2,946 | 195 | 0- | 0- | (3,141 | ) | 0- | |||||||||||||||||
Total revenues | 23,125 | 20,640 | 31,189 | 3,546 | (3,141 | ) | 75,359 | |||||||||||||||||
| ||||||||||||||||||||||||
Cost of revenues | 21,703 | 17,885 | 26,961 | 3,312 | (2,937 | ) | 66,924 | |||||||||||||||||
Gross profit (loss) | 1,422 | 2,755 | 4,228 | 234 | (204 | ) | 8,435 | |||||||||||||||||
| ||||||||||||||||||||||||
Research and development | (3 | ) | (2 | ) | 7 | 183 | 0- | 185 | ||||||||||||||||
Selling and marketing | 1,429 | 1,152 | 1,527 | 261 | 0- | 4,369 | ||||||||||||||||||
General and administrative | 2,183 | 2,054 | 2,732 | 643 | 0- | 7,612 | ||||||||||||||||||
Other expenses (income) | 0- | 21 | 0- | 294 | 0- | 315 | ||||||||||||||||||
Operating income (loss) | $ | (2,187 | ) | $ | (470 | ) | $ | (38 | ) | $ | (1,147 | ) | $ | (204 | ) | $ | (4,046 | ) | ||||||
Financial expenses, net | 770 | |||||||||||||||||||||||
Loss before taxes on income | (4,816 | ) | ||||||||||||||||||||||
| Year ended December 31, 2014 | ||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Components | Heat Transfer Services and Products | MRO services for Aviation Components | Elimination of inter-company sales | Consolidated | ||||||||||||||||
| Revenues | ||||||||||||||||||||
| Sale of products and services | $ | 22,871 | $ | 30,121 | $ | 27,734 | $ | - | $ | 80,726 | ||||||||||
| Intersegment revenues | 5,314 | 229 | - | (5,543 | ) | - | ||||||||||||||
| Total revenues | 28,185 | 30,350 | 27,734 | (5,543 | ) | 80,726 | ||||||||||||||
| Cost of revenues | 23,249 | 23,101 | 23,502 | (5,330 | ) | 64,522 | ||||||||||||||
| Gross profit | 4,936 | 7,249 | 4,232 | (213 | ) | 16,204 | ||||||||||||||
| Research and development | 841 | 229 | - | - | 1,070 | |||||||||||||||
| Selling and marketing | 1,538 | 1,058 | 607 | - | 3,203 | |||||||||||||||
| General and administrative | 2,717 | 2,417 | 2,989 | - | 8,123 | |||||||||||||||
| Other income | (11 | ) | - | - | - | (11 | ) | |||||||||||||
| Operating income (loss) | (149 | ) | 3,545 | 636 | (213 | ) | 3,819 | |||||||||||||
F - 5152
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1620 -SEGMENT INFORMATION (CONT)
b.Segments statement operations disclosure (cont.)
Year ended December 31, 2019 | ||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Accessories | MRO Services for heat transfer components and OEM of heat transfer solutions | MRO services for Aviation Components and lease | Overhaul and coating of jet engine components | Elimination of inter-company sales | Consolidated | |||||||||||||||||||
Revenues | ||||||||||||||||||||||||
Sale of products and services | $ | 20,552 | $ | 34,183 | $ | 38,687 | $ | 4,057 | $ | 0- | $ | 97,479 | ||||||||||||
Intersegment revenues | 6,037 | 250 | 0- | 0- | (6,287 | ) | 0- | |||||||||||||||||
Total revenues | 26,589 | 34,433 | 38,687 | 4,057 | (6,287 | ) | 97,479 | |||||||||||||||||
| ||||||||||||||||||||||||
Cost of revenues | 23,998 | 27,852 | 33,337 | 3,460 | (6,468 | ) | 82,179 | |||||||||||||||||
Gross profit | 2,591 | 6,581 | 5,350 | 597 | 181 | 15,300 | ||||||||||||||||||
| ||||||||||||||||||||||||
Research and development | 58 | 83 | 7 | (35 | ) | 0- | 113 | |||||||||||||||||
Selling and marketing | 1,530 | 1,638 | 1,334 | 427 | 0- | 4,929 | ||||||||||||||||||
General and administrative | 1,978 | 2,734 | 2,408 | 534 | 0- | 7,654 | ||||||||||||||||||
Operating income (loss) | $ | (975 | ) | $ | 2,126 | $ | 1,601 | $ | (329 | ) | $ | 181 | $ | 2,604 | ||||||||||
| ||||||||||||||||||||||||
Financial expenses, net | 422 | |||||||||||||||||||||||
Income before taxes on income | 2,182 | |||||||||||||||||||||||
Year ended December 31, 2013 | ||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Componentse | Heat Transfer Services and Products | MRO services for Aviation Components | Elimination of inter-company sales | Consolidated | ||||||||||||||||
| Revenues | ||||||||||||||||||||
| Sale of products and services | $ | 27,326 | $ | 29,796 | $ | 22,429 | $ | - | $ | 79,551 | ||||||||||
| Intersegment revenues | 3,812 | 111 | - | (3,923 | ) | - | ||||||||||||||
| Total revenues | 31,138 | 29,907 | 22,429 | (3,923 | ) | 79,551 | ||||||||||||||
| Cost of revenues | 24,141 | 22,464 | 19,224 | (4,086 | ) | 61,743 | ||||||||||||||
| Gross profit | 6,997 | 7,443 | 3,205 | 163 | 17,808 | |||||||||||||||
| Research and development | 415 | 298 | - | - | 713 | |||||||||||||||
| Selling and marketing | 1,520 | 1,145 | 485 | - | 3,150 | |||||||||||||||
| General and administrative | 3,158 | 2,249 | 3,261 | - | 8,668 | |||||||||||||||
| Other income | (20 | ) | - | - | - | (20 | ) | |||||||||||||
| Operating income (loss) | 1,924 | 3,751 | (541 | ) | 163 | 5,297 | ||||||||||||||
F - 5253
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1620 -SEGMENT INFORMATION (CONT)
c.The following financial information identifies the assets, depreciation and amortization, and capital expenditures to segments:
Year ended December 31, 2021 | ||||||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Accessories | MRO Services for heat transfer components and OEM of heat transfer solutions | MRO services for Aviation Components and Lease | Discontinued operation | Overhaul and coating of jet engine components | Amounts not allocated to segments | Consolidated | ||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Total assets | 27,271 | 27,267 | 45,112 | 0- | 7,128 | 4,055 | 110,833 | |||||||||||||||||||||
Depreciation and amortization | 2,174 | 740 | 1,683 | 0- | 284 | 0- | 4,881 | |||||||||||||||||||||
Asset’s impairment | 1,800 | - | - | 0- | - | - | 1,800 | |||||||||||||||||||||
Expenditure for segment assets | 271 | 4,831 | 5,624 | - | 1,604 | 0- | 12,330 | |||||||||||||||||||||
Year ended December 31, 2020 | ||||||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Accessories | MRO Services for heat transfer components and OEM of heat transfer solutions | MRO services for Aviation Components and Lease | Discontinued operation | Overhaul and coating of jet engine components | Amounts not allocated to segments | Consolidated | ||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
Total assets | 32,536 | 21,525 | 41,433 | 0- | 6,073 | 14,554 | 116,121 | |||||||||||||||||||||
Depreciation and amortization | 1,400 | 1,020 | 799 | 0- | 846 | 0- | 4,065 | |||||||||||||||||||||
Expenditure for segment assets | 765 | 556 | 9,410 | 0- | 309 | 0- | 11,040 | |||||||||||||||||||||
Year ended December 31, 2015 | ||||||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Components | Heat Transfer Services and Products | MRO services for Aviation Components | Overhaul and coating of jet engine components | Amounts not allocated to segments | Consolidated | |||||||||||||||||||
| Total assets | 29,440 | 28,400 | 24,170 | 11,635 | 15,938 | 109,583 | ||||||||||||||||||
| Depreciation and amortization | 1,127 | 789 | 669 | 196 | 2,781 | |||||||||||||||||||
| Expenditure for segment assets | 1,075 | 1,400 | 821 | 51 | 3,347 | |||||||||||||||||||
Year ended December 31, 2014 | ||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Components | Heat Transfer Services and Products | MRO services for Aviation Components | Amounts not allocated to segments | Consolidated | ||||||||||||||||
| Total assets | $ | 32,808 | $ | 26,889 | $ | 23,044 | $ | 16,435 | $ | 99,176 | ||||||||||
| Depreciation and amortization | 1,027 | 675 | 367 | - | 2,069 | |||||||||||||||
| Expenditure for segment assets | 1,126 | 810 | 539 | - | 2,475 | |||||||||||||||
Year ended December 31, 2013 | ||||||||||||||||||||
OEM of Heat Transfer Solutions and Aviation Components | Heat Transfer Services and Products | MRO services for Aviation Components | Amounts not allocated to segments | Consolidated | ||||||||||||||||
| Depreciation and amortization (*) | 991 | 603 | 265 | - | 1,859 | |||||||||||||||
| Expenditure for segment assets (*) | 1,032 | 664 | 1,134 | - | 2,830 | |||||||||||||||
F - 5354
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1721 -ENTITY-WIDE DISCLOSURE
a.Total revenues - by geographical location were attributed according to customer residential country as follows:
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Total revenues | Total revenues | Total revenues | ||||||||||
| ||||||||||||
Sale of products | ||||||||||||
Israel | $ | 5,532 | $ | 3,355 | $ | 3,464 | ||||||
United States | 13,716 | 12,284 | 14,181 | |||||||||
Other | 6,622 | 7,100 | 7,374 | |||||||||
$ | 25,870 | $ | 22,739 | $ | 25,019 | |||||||
Year ended December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
Total revenues | Total revenues | Total revenues | ||||||||||
| ||||||||||||
Sale of Services | ||||||||||||
Israel | $ | 2,213 | $ | 3,543 | $ | 3,624 | ||||||
United States | 34,231 | 34,765 | 43,196 | |||||||||
Other | 15,659 | 14,312 | 25,640 | |||||||||
$ | 52,103 | $ | 52,620 | $ | 72,460 | |||||||
b.Total long-lived assets - by geographical location were as follows:
December 31, | ||||||||||||
2021 | 2020 | 2019 | ||||||||||
| ||||||||||||
Israel | $ | 8,427 | $ | 15,071 | $ | 16,692 | ||||||
United States | 26,978 | 18,908 | 11,354 | |||||||||
Total | $ | 35,405 | $ | 33,979 | $ | 28,046 | ||||||
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Total revenues | Total revenues | Total revenues (*) | ||||||||||
| Sale of products | ||||||||||||
| Israel | $ | 4,102 | $ | 4,807 | $ | 6,248 | ||||||
| United states | 20,013 | 18,886 | 18,016 | |||||||||
| France | 3,720 | 3,642 | 5,482 | |||||||||
| Rest of Europe | 1,776 | 2,257 | 2,292 | |||||||||
| Other | 1,728 | 1,771 | 2,326 | |||||||||
| $ | 31,339 | $ | 31,363 | $ | 34,364 | |||||||
c.Major Customers
The company has a single costumer which his annual sales in 2021 constitute 12.8% from the total group sales.
Year ended December 31, | ||||||||||||
2015 | 2014 | 2013 | ||||||||||
Total revenues | Total revenues | Total revenues (*) | ||||||||||
| Sale of Services | ||||||||||||
| Israel | $ | 814 | $ | 834 | $ | 612 | ||||||
| United states | 32,738 | 31,267 | 27,639 | |||||||||
| Netherland | 1,271 | 1,734 | 1,553 | |||||||||
| Rest of Europe | 11,569 | 8,786 | 7,658 | |||||||||
| Other | 7,876 | 6,742 | 7,725 | |||||||||
| $ | 54,268 | $ | 49,363 | $ | 45,187 | |||||||
December 31, | ||||||||
2015 | 2014 | |||||||
| Israel | $ | 12,481 | $ | 5,830 | ||||
| United states | 6,453 | 5,694 | ||||||
| Total | $ | 18,934 | $ | 11,524 | ||||
F - 5455
TAT TECHNOLOGIES LTD. AND ITS SUBSIDIARIES |
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS |
U.S. dollars in thousands |
NOTE 1822 -SUPPLEMENTAL CONSOLIDATED BALANCE SHEETS INFORMATION
Warranty provision | Provision for current expected credit losses | |||||||
| ||||||||
Balance, as of December 31, 2018 | $ | 285 | $ | 276 | ||||
Additions | 115 | 84 | ||||||
Deductions | (165 | ) | (46 | ) | ||||
| ||||||||
Balance, as of December 31, 2019 | $ | 235 | $ | 314 | ||||
Additions | 80 | 194 | ||||||
Deductions | (65 | ) | (202 | ) | ||||
| ||||||||
Balance, as of December 31, 2020 | $ | 250 | $ | 306 | ||||
Additions | 80 | 269 | ||||||
Deductions | (87 | ) | (186 | ) | ||||
| ||||||||
Balance, as of December 31, 2021 | $ | 243 | $ | 389 | ||||
| Warranty provision | Provision for doubtful Accounts | |||||||
| Balance, as of December 31, 2012 | 276 | 376 | ||||||
| Additions | 186 | 17 | ||||||
| Deductions | (190 | ) | (270 | ) | ||||
| Less: Held for sale | (43 | ) | - | |||||
| Balance, as of December 31, 2013 | 229 | 123 | ||||||
| Additions | 286 | 107 | ||||||
| Deductions | (264 | ) | (105 | ) | ||||
| Balance, as of December 31, 2014 | $ | 251 | 125 | |||||
| Additions | 294 | 206 | ||||||
| Deductions | (221 | ) | - | |||||
| Balance, as of December 31, 2015 | $ | 324 | $ | 331 | ||||
| Year ended December 31, 2014 | ||||||||||||
| As reported previously | Adjustment | As revised | ||||||||||
| Cost of goods: | ||||||||||||
| Products | 23,340 | 276 | 23,616 | |||||||||
| Services | 40,286 | 620 | 40,906 | |||||||||
| Gross profit | 17,100 | (896 | ) | 16,204 | ||||||||
| General and administrative | 9,019 | (896 | ) | 8,123 | ||||||||
| Operating income | 3,819 | * | 3,819 | |||||||||
| Net income | 1,432 | * | 1,432 | |||||||||
| Net income per share | 0.16 | * | 0.16 | |||||||||
| Year ended December 31, 2013 | ||||||||||||
As reported previously | Adjustment | As revised | ||||||||||
| Cost of goods: | ||||||||||||
| Products | 24,892 | 251 | 25,143 | |||||||||
| Services | 35,987 | 613 | 36,600 | |||||||||
| Gross profit | 18,672 | (864 | ) | 17,808 | ||||||||
| General and administrative | 9,512 | (844 | ) | 8,668 | ||||||||
| Operating income | 5,317 | (20 | ) | 5,297 | ||||||||
| Net income | 2,822 | (20 | ) | 2,802 | ||||||||
| Net income per share | 0.32 | * | 0.32 | |||||||||
As reported Previously | Adjustment | As revised | Impact of adoption* | As presented | ||||||||||||||||
| Inventories, net | 35,404 | 73 | 35,477 | - | 35,477 | |||||||||||||||
| Total current assets | 83,342 | (518 | ) | 82,824 | (1,103 | ) | 81,721 | |||||||||||||
| Total assets | 101,468 | (2,068 | ) | 99,400 | (224 | ) | 99,176 | |||||||||||||
| Total current liabilities | 11,537 | (591 | ) | 10,946 | - | 10,946 | ||||||||||||||
| Total long-term liabilities | 4,463 | (1,550 | ) | 2,913 | (224 | ) | 2,689 | |||||||||||||
| Total liabilities | 16,000 | (2,141 | ) | 13,859 | (224 | ) | 13,635 | |||||||||||||
| Retained earnings | 20,272 | 73 | 20,345 | - | 20,345 | |||||||||||||||
| Total equity | 85,468 | 73 | 85,541 | - | 85,541 | |||||||||||||||
NOTE 2023 -SUBSEQUENT EVENTS
Following the Company's announcement in 2021 regarding to the intention to transfer Company's activity from our leased facility in Gedera to a facility in Tulsa, Oklahoma and to a facility in Kiryat Gat as part of the company restructuring plan, in December 2021 the TAT and the landlord agreed on the settlement conditions which signed on January 10, 2022. TAT will vacate the property on March 31, 2022 and pay the rent fees until this termination date without any exit penalty or additional evacuation cost, see note 7.
F - 56