As filed with the Securities and Exchange Commission on March 3, 2017February 28, 2019

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FormForm 20-F

OR

For the fiscal year ended December 31, 20162018

OR

For the transition period fromto

OR

Date of event requiring this shell company report                

For the transition period fromto

Commission file number:1-13546

STMicroelectronics N.V.

(Exact name of registrant as specified in its charter)

WTC Schiphol Airport

Schiphol Boulevard 265

1118 BH Schiphol

The Netherlands

(Address of principal executive offices)

Carlo BozottiJean-Marc Chery

39, cheminChemin du Champ des Filles

1228Plan-Les-Ouates

Geneva

Switzerland

Tel: +41 22 929 29 29

Fax: +41 22 929 29 88

(Name, Telephone,E-mail and/or Facsimile number and Address of Company Contact Person)

Securities registered or to be registered pursuant to Section 12(b) of the Act:

Securities registered or to be registered pursuant to Section 12(g) of the Act: None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report:

911,030,420911,156,920 common shares at December 31, 20162018

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☒    No  ☐

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.    Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days:    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of RegulationRegulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, anon-accelerated filer, or a smaller reportingan emerging growth company. See the definition of “large accelerated filer”, “accelerated filer” and “smaller reporting“emerging growth company” in RuleRule 12b-2 of the Exchange Act. (Check one):Act:

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards† provided pursuant to Section 13(a) of the Exchange Act.

† The term “new or revised financial accounting standard” refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after April 5, 2012.  ☐

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow. Item  17  ☐    Item 18  ☐

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in RuleRule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒

TABLE OF CONTENTS

PRESENTATION OF FINANCIAL AND OTHER INFORMATION

In this annual report on FormForm 20-F (the “Form“Form 20-F”), references to “we”, “us” and “Company” are to STMicroelectronics N.V. together with its consolidated subsidiaries, references to “EU” are to the European Union, references to “€” and the “Euro” are to the Euro currency of the EU, references to the “United States” and the “U.S.” are to the United States of America and references to “$” and to “U.S. dollars” are to United States dollars. References to “mm” are to millimeters and references to “nm” are to nanometers.

We have compiled market size and our market share data in this Form20-F using statistics and other information obtained from several third-party sources. Except as otherwise disclosed herein, all references to trade association data are references to World Semiconductor Trade Statistics (“WSTS”). Certain terms used in this Form20-F are defined in “Certain Terms”.

We report our financial statements in U.S. dollars and prepare our Consolidated Financial Statements in accordance with generally accepted accounting principles in the United States (“U.S. GAAP”). We also report certainnon-U.S. GAAP financial measures (free cash flow, operating income and operating margin before impairment and restructuring charges, adjusted diluted earnings per share and net financial position), which are derived from the amounts presented in the financial statements prepared under U.S. GAAP. Furthermore, we are required by Dutch law to report our Statutory and Consolidated Financial Statements, in accordance with International Financial Reporting Standards (“IFRS”), as issued by the International Accounting Standards Board (“IASB”) and adopted by the European Union. The IFRS financial statements are reported separately and can differ materially from the statements reported in U.S. GAAP.

Various amounts and percentages used in this FormForm 20-F have been rounded and, accordingly, they may not total 100%.

We and our affiliates own or otherwise have rights to the trademarks and trade names, including those mentioned in this Form20-F, used in conjunction with the marketing and sale of our products.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

Some of the statements contained in this FormForm 20-F that are not historical facts, particularly in “Item 3. Key Information — Risk Factors”, “Item 4. Information on the Company” and “Item 5. Operating and Financial Review and Prospects” and “— Business Outlook” are statements of future expectations and other forward-looking statements (within the meaning of Section 27A of the Securities Act of 1933 or Section 21E of the Securities Exchange Act of 1934, each as amended) that are based on management’s current views and assumptions, and are conditioned upon and also involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those anticipated by such statements due to, among other factors:

Such forward-looking statements are subject to various risks and uncertainties, which may cause actual results and performance of our business to differ materially and adversely from the forward-looking statements. Certain forward-looking statements can be identified by the use of forward-looking terminology, such as “believes”, “expects”, “may”, “are expected to”, “should”, “would be”, “seeks” or “anticipates” or similar expressions or the negative thereof or other variations thereof or comparable terminology, or by discussions of strategy, plans or intentions. Some of these risk factors are set forth and are discussed in more detail in “Item 3. Key Information — Risk Factors”. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those described in this FormForm 20-F as anticipated, believed or expected. We do not intend, and do not assume any obligation, to update any industry information or forward-looking statements set forth in this FormForm 20-F to reflect subsequent events or circumstances.

Unfavorable changes in the above or other factors listed under “Item 3. Key Information — Risk Factors” from time to time in our Securities and Exchange Commission (“SEC”) filings, could have a material adverse effect on our business and/or financial condition.

PART I

Not applicable.

Not applicable.

Selected Financial Data

The table below sets forth our selected consolidated financial data for each of the years in the five-year period ended December 31, 2016.2018. Such data have been derived from our audited Consolidated Financial Statements. Audited Consolidated Financial Statements for each of the years in the three-year period ended December 31, 2016,2018, including the Notes thereto (collectively, the “Consolidated Financial Statements”), are included elsewhere in this FormForm 20-F, while data for prior periods have been derived from our audited Consolidated Financial Statements used in such periods.

The following information should be read in conjunction with “Item 5. Operating and Financial Review and Prospects” and the audited Consolidated Financial Statements and the related Notes thereto included in “Item 18. Financial Statements” in this FormForm 20-F.

Risks Related to the Semiconductor Industry which Impact Us

We, and the semiconductor industry as a whole, may be impacted by changes in, or uncertainty about, global, regional and local economic, political, legal, regulatory and social environments.

Changes in, and uncertainty about, economic, political, legal, regulatory and social conditions pose a risk as consumers and businesses may postpone spending in response to factors such as curtailment of trade and other business restrictions, financial market volatility, interest rate fluctuations, shifts in inflationary and deflationary expectations, lower capital and productivity growth, unemployment, negative news, declines in income or asset values and/or other factors. Such global, regional and local conditions could have a material adverse effect on customer andend-market demand for our products, thus materially adversely affecting our business and financial condition.

The institution of trade tariffs globally could negatively impact economic conditions, which could have negative repercussions for our business. In 2018, both the U.S. Administration as well as several foreign governments have been undertaking significant trade policy changes, in some cases followed by legislative or executive action. For instance, U.S. and China have applied tariffs on foreign imports of certain goods and materials and they have announced that further tariffs would be applied in the future. Such trade policy changes could trigger retaliatory actions by affected countries, which could have a negative impact on our ability to do business in affected countries or lead to reduced purchases of our products by foreign customers, leading to increased costs of components contained in our products, increased manufacturing costs of our products, and higher prices for our products in foreign markets. Further, protectionist measures, laws or governmental policies may encourage our customers to relocate their manufacturing capacity or supply chain to their own respective countries or require their respective contractors, subcontractors and relevant agents to do so, which could impair our ability to sustain our current level of productivity and manufacturing efficiency.

We, and the semiconductor industry as a whole, face greater risks due to the international nature of the semiconductor business, including in the countries where we, our customers or our suppliers operate, such as:

The semiconductor industry is cyclical and downturns in the semiconductor industry can negatively affect our results of operations and financial condition.

The semiconductor industry is cyclical and has been subject to significant downturns from time to time, as a result of global economic conditions as well as industry-specific factors, such asbuilt-in excess capacity, fluctuations in product supply, product obsolescence and changes inend-customer preferences. Downturns are typically characterized by reduction in overall demand, accelerated erosion of selling prices, reduced revenues and high inventory levels, any of which could result in a significant deterioration of our results of operations. Such macroeconomic trends typically relate to the semiconductor industry as a whole rather than to the individual semiconductor markets to which we sell our products. To the extent that industry downturns are concurrent with the timing of new increases in production capacity or introduction of new advanced technologies in our industry, the negative effects on our business from such industry downturns may also be more severe. We have experienced revenue volatility and market downturns in the past and expect to experience them in the future, which could have a material adverse impact on our results of operations and financial condition.

We may not be able to match our production capacity to demand.

As a result of the cyclicality and volatility of the semiconductor industry, it is difficult to predict future developments in the markets we serve, and, in turn, to estimate requirements for production capacity. If our markets, major customers or certain product designs or technologies do not perform as well as we have anticipated, we risk unused capacity charges, write-offs of inventories and losses on products, and we could be required to undertake restructuring and transformation measures that may involve significant charges to our earnings. Furthermore, during certain periods, we have also experienced increased demand in certain market segments and product technologies, which has led to a shortage of capacity, and an increase in the lead times of our delivery to customers.customers and, in certain instances, being required to enter into agreements with our suppliers with onerous terms, such astake-or-pay arrangements. See “Item 5. Operating and Financial Review and Prospects — Results of Operations — Impairment, restructuring charges and other related closure costs”.

Competition in the semiconductor industry is intense, and we may not be able to compete successfully if our product design technologies, process technologies and products do not meet market requirements. Furthermore, the competitive environment of the industry has resulted, and is expected to continue to result, in vertical and horizontal consolidation among our suppliers, competitors and customers, which may lead to erosion of our market share, impact our ability to compete and require us to restructure our operations.

We compete in different product lines to various degrees on certain characteristics, for example, price, technical performance, product features, product design, product availability, process technology, manufacturing

capabilities and sales and technical support. Given the intense competition in the semiconductor industry, if our products do not meet market requirements based on any of these characteristics, our business, financial condition and results of operations could be materially adversely affected. Our competitors may have a stronger presence in key markets and geographic regions, greater name recognition, larger customer bases, greater government support and greater financial, research and development, sales and marketing, manufacturing, distribution, technical and other resources than we do. These competitors may be able to adapt more quickly to changes in the business environment, to new or emerging technologies and to changes in customer requirements.

The semiconductor industry is intensely competitive and characterized by the high costs associated with developing marketable products and manufacturing technologies as well as high levels of investment in

production capabilities. As a result, the semiconductor industry has experienced, and is expected to continue to experience, significant vertical and horizontal consolidation among our suppliers, competitors and customers. Consolidation in the semiconductor industry could erode our market share, negatively impact our ability to compete and require us to increase our R&D effort, engage in mergers and acquisitions and/or restructure our operations.

We, and the semiconductor industry as a whole, may be impacted by changes in, or uncertainty about, global, regional and local economic, political, legal, regulatory and social environments, including as a result of curtailment of trade and other business restrictions, financial market volatility, military conflict, civil unrest and/or terrorist activities, as well as natural events such as severe weather, health risks or epidemics.

We, and the semiconductor industry as a whole, are significantly impacted by global, regional and local environments. Changes in, and uncertainty about, economic, political, legal, regulatory and social conditions pose a risk as consumers and businesses may postpone spending in response to factors such as curtailment of trade and other business restrictions, financial market volatility, interest rate fluctuations, shifts in inflationary and deflationary expectations, lower capital and productivity growth, unemployment, negative news, declines in income or asset values and/or other factors. Such global, regional and local conditions could have a material adverse effect on customer andend-market demand for our products, thus materially adversely affecting our business and financial condition.

We, and the semiconductor industry as a whole, face greater risks due to the international nature of the semiconductor business, including in the countries where we, our customers or our suppliers operate, such as:

Risks Related to Our Operations

Market dynamics have driven, and continue to drive us, to a strategic repositioning.

In recent years, we have undertaken several initiatives to reposition our business, both through divestitures and investments. Our strategies to improve our results of operations and financial condition have led us, and may in the future lead us, to acquire businesses that we believe to be complementary to our own, or to divest ourselves of or wind down activities that we believe do not serve our longer term business plans. Our potential acquisition strategies depend in part on our ability to identify suitable acquisition targets, finance their acquisition, obtain approval by our shareholders and obtain required regulatory and other approvals. Our potential divestiture strategies depend in part on our ability to compete and to identify the activities in which we should no longer engage, obtain the relevant approvals pursuant to our governance process and then determine and execute appropriate methods to divest of them.

We are constantly monitoring our product portfolio and cannot exclude that additional steps in this repositioning process may be required. Furthermore, we cannot assure that any strategic repositioning of our business, including executed and possible future acquisitions or dispositions, will be successful and will not result in impairment, restructuring charges and other related closure costs.

Acquisitions and divestitures involve a number of risks that could adversely affect our operating results and financial condition, including: we may be unable to successfully integrate businesses or teams we acquire with our culture and strategies on a timely basis or at all; and we may be required to record charges related to the goodwill or other long-term assets associated with the acquired businesses. There can be no assurance that we will be able to achieve the full scope of the benefits we expect from a particular acquisition, divestiture or investment. Our business, financial condition and results of operations may suffer if we fail to coordinate our resources effectively to manage both our existing businesses and any acquired businesses. In addition, the financing of future acquisitions or divestitures may negatively impact our financial position, including our ability to pay a dividend, and credit rating and we could be required to raise additional funding.

Other risks associated with acquisitions include: assumption of potential liabilities, disclosed or undisclosed, associated with the business acquired, which liabilities may exceed the amount of indemnification available from the seller; potential inaccuracies in the financials of the business acquired; and our ability to retain customers of an acquired entity or business. Identified risks associated with divestitures include: loss of activities and technologies that may have complemented our remaining businesses or operations; and loss of important services provided by key employees that are assigned to divested activities.

Our high fixed costs could adversely impact our results.

Our operations are characterized by high fixed or other costs which are difficult to reduce, costs, including costs related to manufacturing, particularly as we operate our own manufacturing facilities, and the employment of our highly skilled workforce. When demand for our products decreases, competition increases or we fail to forecast demand accurately, we are driven to reduce prices and we are not always able to decrease our total costs in line with resulting revenue declines. As a result, the costs associated with our operations may not be fully absorbed, leading to unused capacity charges, higher average unit costs and lower gross margins, adversely impacting our results.

Our capital needs are high compared to those competitors who do not producemanufacture their own products and we may need additional funding in the coming years to finance our investments, to purchase other companies or technologies developed by third parties or to refinance our maturing indebtedness.

As a result of our choice to maintain control of a large portion of our manufacturing technologies and capabilities, we may require significant capital expenditure to maintain or upgrade our facilities in the future. We monitor our capital expenditures taking into consideration factors such as trends in the semiconductor market, customer requirements and capacity utilization. These capital expenditures may increase in the future if we decide to upgrade or expand the capacity of our manufacturing facilities.facilities, purchase or build new facilities or increase investments supporting key strategic initiatives. There can be no assurance that future market demand and products required by our customers will meet our expectations. We also may need to invest in other companies, in IP and/or in technology developed either by us or by third parties to maintain or improve our position in the market or to complement or expand our existing business. Failure to invest appropriately or in a timely manner could have a material adverse effect on our business and results of operations.

The foregoing may require us to secure additional financing, including through the issuance of debt, equity or both. The timing and the size of any new share or bond offering would depend upon market conditions as well as a variety of other factors. In addition, the capital markets may from time to time offer terms of financing that are particularly favorable. We cannot exclude that we may access the capital markets opportunistically to take advantage of market conditions. Any such transaction or any announcement concerning such a transaction could materially impact the market price of our common shares. If we are unable to access capital on acceptable terms, this may adversely affect our business and results of operations.

Our financial results can be affected by fluctuations in exchange rates, principally in the value of the U.S. dollar.

Currency exchange rate fluctuations affect our results of operations because our reporting currency is the U.S. dollar, in which we receive the major portion of our revenues, while, more importantly, we incur a significantlimited portion of our revenue and a significantly higher portion of our costs in currencies other than the U.S. dollar. A significant variation of the value of the

U.S. dollar against the principal currencies that have a material impact on us (primarily the Euro, but also certain other currencies of countries where we have operations, such as the Singapore dollar) could result in a favorable impact, net of hedging, on our net income in the case of an appreciation of the U.S. dollar, or a negative impact, net of hedging, on our net income if the U.S. dollar depreciates relative to these currencies, in particular with respect to the Euro.

In order to reduce the exposure of our financial results to the fluctuations in exchange rates, our principal strategy has been to balance as much as possible the proportion of sales to our customers denominated in U.S. dollars with the amount of purchases from our suppliers denominated in U.S. dollars and to reduce the weight of the other costs, including depreciation, denominated in Euros and in other currencies. In order to further reduce our exposure to U.S. dollar exchange rate fluctuations, we have hedged certain line items on our Consolidated Statements of Income, in particular with respect to a portion of the cost of sales, the majority of the R&D expenses and certain SG&A expenses located in the Euro zone. We also hedge certain manufacturing costs,

included within the cost of sales, denominated in Singapore dollars. There can be no assurance that our hedging transactions will prevent us from incurring higher Euro-denominated manufacturing costs and/or operating expenses when translated into our U.S. dollar-based accounts. See “Item 5. Operating and Financial Review and Prospects — Impact of Changes in Exchange Rates” and “Item 11. Quantitative and Qualitative Disclosures About Market Risk”.

We depend on collaboration with other semiconductor industry companies, research organizations, universities and suppliers to further our R&D efforts, and our business and prospects could be materially adversely affected by the failure or termination of such alliances.

Our success depends on our ability to introduce innovative new products and technologies to the marketplace on a timely basis. In light of the high levels of investment required for R&D activities, we depend on collaborations with other semiconductor industry companies, research organizations, universities and suppliers to develop or access new technologies.

Such collaboration provides us with a number of important benefits, including the sharing of costs, reductions in our own capital requirements, acquisitions of technicalknow-how and access to additional production capacities. However, there can be no assurance that our collaboration efforts will be successful and allow us to develop and access new technologies in due time, in a cost-effective manner and/or to meet customer demands. If a particular collaboration terminates before our intended goals are accomplished we may incur additional unforeseen costs, and our business and prospects could be adversely affected. Furthermore, if we are unable to develop or otherwise access new technologies, whether independently or in collaboration with another industry participant, we may fail to keep pace with the rapid technology advances in the semiconductor industry, our participation in the overall semiconductor industry may decrease and we may also lose market share.

We receive public funding, and a reduction in the amount available to us or demands for repayment could increase our costs and impact our results of operations.

To support our proprietary R&D for technology investments and investments in cooperative R&D ventures, we have in the past benefited and expect to continue to benefit in the future from public funding, mainly from French, Italian and European Union governmental entities. The public funding we receive is subject to periodic review by the relevant authorities and there can be no assurance that we will continue to benefit from such programs at current levels or that sufficient alternative funding will be available if we lose such support. If any of the public funding programs we participate in are curtailed or discontinued and we do not reduce the relevant R&D costs, this could have a material adverse effect on our business. Furthermore, to receive public funding, we enter into agreements which require compliance with extensive regulatory requirements and set forth certain conditions relating to the funded programs. If we fail to meet the regulatory requirements or applicable conditions, we may, under certain circumstances, be required to refund previously received amounts, which could have a material adverse effect on our results of operations. If there are changes in the public funding we receive, this could affect our ability to continue investing in R&D at current levels and we could experience a material adverse effect on our business, financial condition and results of operations.

Our operating results may vary significantly from quarter to quarter and annually and may also differ significantly from our expectations or guidance.

Our operating results are affected by a wide variety of factors that could materially and adversely affect revenues and profitability or lead to significant variability of our operating results from one period to the next.

These factors include changes in demand from our key customers, capital requirements, inventory management, availability of funding, competition, new product developments, start of adoption of our new products by customers, technological changes, manufacturing or supplier issues and effective tax rates. In addition, in periods of industry overcapacity or when our key customers encounter difficulties in their end markets or product ramps, orders are more exposed to cancellations, reductions, price renegotiation or postponements, which in turn reduce our management’s ability to forecast the next quarter or full year production levels, revenues and margins. For these reasons and others that we may not yet have identified, our revenues and operating results may differ materially from our expectations or guidance as visibility is reduced. See “Item 4. Information on the Company — Backlog”.

Our operating results depend on our ability to obtain quality supplies on commercially reasonable terms. As we depend on a limited number of suppliers for materials, equipment and technology, we may experience supply disruptions if suppliers interrupt supply, increase prices or experience material adverse changes in their financial condition.

Our ability to meet our customers’ demand to manufacture our products depends upon obtaining adequate supplies of quality materials on a timely basis and on commercially reasonable terms. Certain materials are available from a limited number of suppliers or only from a limited number of suppliers in a particular region. We purchase certain materials whose prices on the world markets have fluctuated significantly in the past and may fluctuate significantly in the future. Although supplies for most of the materials we currently use are adequate, shortages could occur in various essential materials due to interruption of supply or increased demand in the industry. In addition, the costs of certain materials may increase due to market pressures and we may not be able to pass on such cost increases to our customers.

We also purchase semiconductor manufacturing equipment and third party licensed technology from a limited number of suppliers and providers and, because such equipment and technology are complex, it is difficult to replace one supplier or provider with another or to substitute one piece of equipment or type of technology for another. In addition, suppliers and providers may extend lead times, limit our supply, increase prices or change contractual terms related to certain manufacturing equipment and third party licensed technology, any of which could adversely affect our results. Furthermore, suppliers and technology providers tend to focus their investments on providing the most technologically advanced equipment, materials and technology and may not be in a position to address our requirements for equipment, materials or technology of older generations. Although we work closely with our suppliers and providers to avoid such shortages, there can be no assurance that we will not encounter these problems in the future.

Consolidation among our suppliers or vertical integration among our competitors may limit our ability to obtain sufficient quantities of materials, equipment and/or technology on commercially reasonable terms and engage in mergers and acquisitions. In certain instances we may be required to enter into agreements with our suppliers with onerous terms, such astake-or-pay arrangements. If we are unable to obtain supplies of materials, equipment or technology in a timely manner or at all, or if such materials, equipment or technology prove inadequate or too costly, our results of operations could be adversely affected.

If our external silicon foundries orback-end subcontractors fail to perform, this could adversely affect our business prospects.

We currently use external silicon foundries andback-end subcontractors for a portion of our manufacturing activities. If our external silicon foundries orback-end subcontractors are unable to satisfy our demand, or experience manufacturing difficulties, delays or reduced yields, our results of operations and ability to satisfy customer demand could suffer. Likewise, if we are unable to meet our commitments to silicon foundries andback-end subcontractors, our results of operations could suffer. Prices for these services also vary depending on

capacity utilization rates at our external silicon foundries andback-end subcontractors, quantities demanded and product and process technology. Such outsourcing costs can vary materially and, in cases of industry shortages, they can increase significantly, negatively impacting our business prospects.

Our manufacturing processes are highly complex, costly and potentially vulnerable to impurities, disruptions or inefficient implementation of production changes or interruptions that can significantly increase our costs and delay product shipments to our customers.

Our manufacturing processes are highly complex, require advanced and increasingly costly equipment and are continuously modified or maintained in an effort to improve yields and product performance and lower the cost of production.

Furthermore, impurities or other difficulties in the manufacturing process can lower yields, interrupt production or result in scrap. As system complexity and production changes have increased andsub-micron technology has become more advanced, manufacturing tolerances have been reduced and requirements for precision have become even more demanding. We have from time to time experienced bottlenecks and production difficulties that have caused delivery delays and quality control problems. There can be no assurance that we will not experience bottlenecks or production, transition or other difficulties in the future.

In addition, we are exposed to risks related to interruptions of our manufacturing processes. If any of our property or equipment is damaged or otherwise rendered unusable or inoperable due to accident, cyberattack or otherwise this could result in interruptions which could have a material adverse effect on our business, financial condition and results of operations.

We may experience quality problems from time to time that can result in decreased sales and operating margin and product liability or warranty claims.

We sell complex products that may not in each case comply with specifications or customer requirements, or may contain design or manufacturing defects, that could cause personal injury, property damage or security risks that could be exploited by unauthorized third parties hacking, corrupting or otherwise obtaining access to our products, including the software loaded thereon by us, our suppliers or our customers. Although our general practice is to contractually limit our liability to the repair, replacement or refund of defective products, we occasionally agree to contractual terms with key customers in which we provide extended warranties and accordingly we may face product liability, warranty, delivery failure, and/or other claims relating to our products that could result in significant expenses relating to compensation payments, product recalls or other actions related to such extended warranties and/or to maintain good customer relationships, which could result in decreased sales and operating margin and other material adverse effects on our business. Costs or payments we may make in connection with warranty and other claims or product recalls may adversely affect our results of operations. There can be no assurance that we will be successful in maintaining our relationships with customers with whom we incur quality problems. Furthermore, if litigation occurs we could incur significant costs and liabilities to defend ourselves against such claims and, if damages are awarded against us, there can be no assurance that our insurance policies will be available or adequate to protect us against such claims.

We may experience delays in delivering our product and technology roadmaps as well as transformation initiatives.

Our industry adapts to technological advancements and it is likely that new products, equipment, processes and service methods, including transformation initiatives, will be introduced in the future. Any failure by us to react to changes or advances in existing technologies and processes as we develop and invest in our product, technology and transformation roadmaps could materially delay the introduction of new solutions. If we are not able to execute on these roadmaps on a timely basis or at an acceptable cost this could result in loss of competitiveness of our solutions, decreased revenue and a loss of market share.

Our computer systems, including hardware, software and information, are subject to attempted security breaches and other cybersecurity threats, which, if successful, could adversely impact our business.

We have, from time to time, experienced attempts by others to gain unauthorized access to our computer systems and networks. The reliability and security of our information technology infrastructure and software, and our ability to expand and continually update technologies in response to our changing needs is critical to our business. In the current environment, there are numerous and evolving risks to cybersecurity, including criminal

hackers, state-sponsored intrusions, terrorism, industrial espionage, employee malfeasance, vandalism and human or technological error. Computer hackers and others routinely attempt to breach the security of technology products, services, and systems, and those of our customers, suppliers and providers of third party licensed technology, and some of those attempts may be successful. Such breaches could result in, for example, unauthorized access to, disclosure, modification, misuse, loss, or destruction of our, our customer, or other third party data or systems, theft of our trade secrets and other sensitive or confidential data, including personal information and intellectual property, system disruptions, and denial of service. The attempts to breach our systems and gain unauthorized access to our information technology systems are becoming increasingly more sophisticated. These attempts may include covertly introducing malware to our computers, including those in our manufacturing operations, and impersonating unauthorized users, among others. For instance, employees and former employees, in particular former employees who become employees of our competitors or customers, may misappropriate, use, publish or provide to our competitors or customers our intellectual property and/or proprietary or confidential business information. Also, third parties may attempt to register domain names similar to our brands or website, which could cause confusion and divert online customers away from our products. In the event of such breaches, we, our customers or other third parties could be exposed to potential liability, litigation, and regulatory action, as well as the loss of existing or potential customers, damage to our reputation, and other financial loss and such breaches could also result in losing existing or potential customers in connection with any actual or perceived security vulnerabilities in our systems. In addition, the cost and operational consequences of responding to breaches and implementing remediation measures could be significant. As these threats continue to develop and grow, we have been adapting and strengthening our security measures. We continue to increase the resources we allocate to implementing, maintaining and/or updating security systems to protect data and infrastructure and to raising security awareness among those having access to our systems. However, these security measures cannot provide absolute security and there can be no assurance that our employee training, operational, and other technical security measures or other controls will detect, prevent or remediate security or data breaches in a timely manner or otherwise prevent unauthorized access to, damage to, or interruption of our systems and operations. We regularly evaluate our IT systems to make enhancements and periodically implement new or upgraded systems. Any delay in the implementation of, or disruption in the transition to different systems could adversely affect our ability to record and report financial and management information on a timely and accurate basis. In addition, a miscalculation of the level of investment needed to ensure our technology solutions are current andup-to-date as technology advances and evolves could result in disruptions in our business should the software, hardware or maintenance of such items becomeout-of-date or obsolete and the costs of upgrading our cybersecurity systems and remediating damages could be substantial. We may also be adversely affected by security breaches related to our equipment providers and providers of third party licensed technology. As a global enterprise, we could also be impacted by existing and proposed laws and regulations, as well as government policies and practices related to cybersecurity, privacy and data protection. Additionally, cyberattacks or other catastrophic events resulting in disruptions to or failures in power, information technology, communication systems or other critical infrastructure could result in interruptions or delays to us, our customers, or other third party operations or services, financial loss, potential liability, and damage our reputation and affect our relationships with our customers and suppliers.

We may be subject to theft, loss, or misuse of personal data about our employees, customers, or other third parties, which could increase our expenses, damage our reputation, or result in legal or regulatory proceedings.

The theft, loss, or misuse of personal data collected, used, stored, or transferred by us to run our business could result in significantly increased security costs or costs related to defending legal claims. Global privacy legislation, including various EU regulations and directives regulating data privacy and security, such as the General Data Protection Regulation (“GDPR”) which came into force on May 25, 2018, and the transmission of content using the Internet involving residents of the EU, enforcement, and policy activity in this area are rapidly expanding and creating a complex compliance regulatory environment.

In particular, the requirements of the GDPR will impose a higher compliance burden on us and materially increase the maximum level of fines for compliance failures from their current levels relating to, among other things, consent to process personal data of individuals, the information provided to individuals regarding the processing of their personal data, the security and confidentiality of personal data, and notifications in the event of data breaches and use of third party processors. Costs to comply with and implement these privacy-related and data protection measures could be significant and may necessitate changes to our business. In addition, our failure to comply with local and international privacy or data protection laws and regulations could result in proceedings against us by governmental entities or others. Failure to comply with the GDPR or other data privacy regimes could subject us to significant fines and reputational harm. GDPR imposes fines for breaches of

data protection requirements, which can be up to four percent of our worldwide revenue or €20 million per breach or data processing activity, whichever is greater.

Further, privacy-related laws or any newly adopted privacy-related laws may have a negative impact on our business if interpreted or implemented in a manner that is inconsistent from country to country and inconsistent with the current policies and practices of our customers or business partners. We may also have to change the manner in which we contract with our business partners, store and transfer information and otherwise conduct our business, which could increase our costs and reduce our revenues. In particular, the requirements of the GDPR will impose a higher compliance burden on us and materially increase the maximum level of fines for compliance failures from their current levels. Costs to comply with and implement these privacy-related and data protection measures could be significant. In addition, our failure to comply with local and international privacy or data protection laws and regulations could result in proceedings against us by governmental entities or others.

Our business is dependent in large part on continued growth in the industries and segments into which our products are sold and on our ability to retain existing customers and attract new ones. A market decline in any of these industries, our inability to retain and attract customers, or customer demand for our products which differs from our projections, could have a material adverse effect on our results of operations.

The demand for our products depends significantly on the demand for our customers’ end products. Growth of demand in the industries and segments into which our products are sold fluctuates significantly and is driven by a variety of factors, including consumer spending, consumer preferences, the development and acceptance of new technologies and prevailing economic conditions. Changes in our customers’ markets and in our customers’ respective shares in such markets could result in slower growth and a decline in demand for our products. In addition, if projected industry growth rates do not materialize as forecasted, our spending on process and product development ahead of market acceptance could have a material adverse effect on our business, financial condition and results of operations.

Our business is dependent upon our ability to retain existing customers. Our existing customers’ product strategy may change from time to time and/or product specifications may change on short-time product life cycles and we have no certainty that our business, financial position and results of operations will not be affected. Our business is also dependent upon our ability to attract new customers. There can be no assurance that we will be successful in attracting and retaining new customers, or in adequately projecting customer demand for our products. Our failure to do so could materially adversely affect our business, financial position and results of operations.

Disruptions in our relationships with any one of our key customers or distributors, and/or material changes in their strategy or financial condition or business prospects, could adversely affect our results of operations.

A substantial portion of our sales is derived from a limited number of customers and distributors. There can be no assurance that our customers or distributors will continue to book the same level of sales with us that they have in the past, will continue to succeed in the markets they serve and will not purchase competing products over our products. Many of our key customers and distributors operate in cyclical businesses that are also highly competitive, and their own market positions may vary considerably. In recent years, some of our customers have vertically integrated their businesses. Such vertical integrations may impact our business. Our relationships with the newly formed entities could be either reinforced or jeopardized by the integration. If we are unable to maintain or increase our market share with our key customers or distributors, or if they were to increase product returns or fail to meet payment obligations, our results of operations could be materially adversely affected. Certain of our products are customized to our customers’ specifications. If customers do not purchase products made specifically for them, we may not be able to recover a cancellation fee from our customers or resell such products to other customers.

Market dynamics have driven, and continue to drive us, to a strategic repositioning.

In recent years, we have undertaken several initiatives to reposition our business. Our strategies to improve our results of operations and financial condition have led us, and may in the future lead us, to acquire businesses that we believe to be complementary to our own, or to divest ourselves of or wind down activities that we believe do not serve our longer term business plans. Our potential acquisition strategies depend in part on our ability to identify suitable acquisition targets, finance their acquisition, obtain approval by our shareholders and obtain required regulatory and other approvals. Our potential divestiture strategies depend in part on our ability to compete and to identify the activities in which we should no longer engage, obtain the relevant approvals pursuant to our governance process and then determine and execute appropriate methods to divest of them.

We are constantly monitoring our product portfolio and cannot exclude that additional steps in this repositioning process may be required. Furthermore, we cannot assure that any strategic repositioning of our business, including executed and possible future acquisitions or dispositions, will be successful and will not result in impairment, restructuring charges and other related closure costs.

Acquisitions and divestitures involve a number of risks that could adversely affect our operating results and financial condition, including: we may be unable to successfully integrate businesses or teams we acquire with our culture and strategies on a timely basis or at all; and we may be required to record charges related to the goodwill or other long-term assets associated with the acquired businesses. There can also vary significantly duebe no assurance that we will be able to impairmentachieve the full scope of goodwillthe benefits we expect from a particular acquisition, divestiture or investment. Our business, financial condition and other intangible assets incurredresults of operations may suffer if we fail to coordinate our resources effectively to manage both our existing businesses and any acquired businesses. In addition, the financing of future acquisitions or divestitures may negatively impact our financial position, including our ability to pay a dividend and/or repurchase our shares, and credit rating and we could be required to raise additional funding.

Other risks associated with acquisitions include: assumption of potential liabilities, disclosed or undisclosed, associated with the business acquired, which liabilities may exceed the amount of indemnification available from the seller; potential inaccuracies in the coursefinancials of acquisitions and equity investments, as well as to impairment of tangible assets due to changes in the business environment.acquired; and our ability to retain customers of an acquired entity, its business or industrialize an acquired process or technology. Identified risks associated with divestitures include: loss of activities and technologies that may have complemented our remaining businesses or operations; and loss of important services provided by key employees that are assigned to divested activities.

We depend on collaboration with other semiconductor industry companies, research organizations, universities, customers and suppliers to further our R&D efforts, and our business and prospects could be materially adversely affected by the failure or termination of such alliances.

Our operating resultssuccess depends on our ability to introduce innovative new products and technologies to the marketplace on a timely basis. In light of the high levels of investment required for R&D activities, we depend in certain instances on collaborations with other semiconductor industry companies, research organizations, universities, customers and suppliers to develop or access new technologies.

Such collaboration provides us with a number of important benefits, including the sharing of costs, reductions in our own capital requirements, acquisitions of technicalknow-how and access to additional production capacities. However, there can vary significantlybe no assurance that our collaboration efforts will be successful and allow us to develop and access new technologies in due time, in a cost-effective manner and/or to impairment of goodwill, other intangible assetsmeet customer demands. If a particular collaboration terminates before our intended goals are accomplished we may incur additional unforeseen costs, and equity investments booked pursuantour business and prospects could be adversely affected. Furthermore, if we are unable to acquisitions, joint venture agreements anddevelop or otherwise access new technologies, whether independently or in collaboration with another industry participant, we may fail to keep pace with the purchase of technologies and licenses from third parties. Because the market for our products is characterized by rapidly changing technologies, significant changesrapid technology advances in the semiconductor industry, our participation in the overall semiconductor industry may decrease and the potential failure of our business initiatives, our future cash flowswe may not support the value of goodwill and other intangibles registered in our Consolidated Balance Sheets. See “Item 5. Operating and Financial Review and Prospects — Overview — Critical Accounting Policies Using Significant Estimates — Impairment of goodwill”, “— Intangible assets subject to amortization” and “— Income (loss) on Equity-method Investments”.also lose market share.

We depend on patents to protect our rights to our technology and may face claims of infringing the IP rights of others.

We depend on patents and other IP rights to protect our products and our manufacturing processes against misappropriation by others. The process of seeking patent protection can be long and expensive, and there can be no assurance that that we will receive patents from currently pending or future applications. Even if patents are issued, they may not be of sufficient scope or strength to provide meaningful protection or any commercial advantage. In addition, effective IP protection may be unavailable or limited in some countries. Our ability to enforce one or more of our patents could be adversely affected by changes in patent laws, laws in certain foreign jurisdictions that may not effectively protect our intellectual property rights or by ineffective enforcement of laws in such jurisdictions. Competitors may also develop technologies that are protected by patents and other IP and therefore either be unavailable to us or be made available to us subject to adverse terms and conditions. We have in the past used our patent portfolio to negotiate broad patent cross-licenses with many of our competitors enabling us to design, manufacture and sell semiconductor products, without concern of infringing patents held by such competitors. We may not in the future be able to obtain such licenses or other rights to protect necessary IP on favorable terms for the conduct of our business, and such failure may adversely impact our results of operations. Such cross-license agreements expire from time to time and there is no assurance that we can or we will extend them.

We have from time to time received, and may in the future receive, communications alleging possible infringement of third party patents and other IP rights. Some of those claims are made byso-callednon-practicing entities against which we are unable to assert our own patent portfolio to lever licensing terms and conditions. Competitors with whom we do not have patent cross-license agreements may also develop technologies that are protected by patents and other IP rights and which may be unavailable to us or only made available on unfavorable terms and conditions. We may therefore become involved in costly litigation brought against us regarding patents and other IP rights. See Note 2324 to our Consolidated Financial Statements. IP litigation may also involve our customers who in turn may seek indemnification from us should we not prevail and/or who may decide to curtail their orders for those of our products over which claims have been asserted. Such lawsuits may therefore have a material adverse effect on our business. We may be forced to stop producing substantially all or some of our products or to license the underlying technology upon economically unfavorable terms and conditions or we may be required to pay damages for the prior use of third party IP and/or face an injunction.

The outcome of IP litigation is inherently uncertain and may divert the efforts and attention of our management and other specialized technical personnel. Such litigation can result in significant costs and, if not resolved in our favor, could materially and adversely affect our business, financial condition and results of operations.

We operate in many jurisdictions with highly complex and varied tax regimes. Changes in tax rules, new or revised legislation or the outcome of tax assessments and audits could cause a material adverse effect on our results.

We operate in many jurisdictions with highly complex and varied tax regimes. Changes in tax rules, new or revised legislation or the outcome of tax assessments and audits could have a material adverse effect on our results. Our tax rate is variable and depends on changes in the level of operating results within various local jurisdictions and on changes in the applicable taxation rates of these jurisdictions, as well as changes in estimated tax provisions due to new events. We currently receive certain tax benefits or benefit from net operating losses cumulated in prior years in some countries, and these benefits may not be available in the future due to changes in the local jurisdictions or credits on net operating losses being no longer available due to either full utilization or expiration of the statute of limitations in such jurisdictions. As a result, our effective tax rate could increase and/or our benefits from carrying forward net operating losses could affect our deferred tax assets in certain countries in the coming years. In addition, the acquisition or divestiture of businesses in certain jurisdictions could materially affect our effective tax rate.

We evaluate our deferred tax asset position and the need for a valuation allowance on a regular basis. The ultimate realization of deferred tax assets is dependent upon, among other things, our ability to generate future taxable income that is sufficient to utilize in certain jurisdictions loss carry-forwards or tax credits before their expiration or our ability to implement prudent and feasible tax planningoptimization strategies. The recorded amount of total deferred tax assets could be reduced, resulting inwhich could have a loss inmaterial adverse effect on our Consolidated Statementresults of Income, a decrease in our total assetsoperations and consequently, in our stockholders’ equity,financial position, if our estimates of projected future taxable income and benefits from available tax strategies are reduced as a result of a change in business condition or in management’s plans or due to other factors, such as changes in tax laws and regulations.

We are subject to the possibility of loss contingencies arising out of tax claims, assessment of uncertain tax positions and provisions for specifically identified income tax exposures. We are also subject to tax audits in

certain jurisdictions. There can be no assurance that we will be successful in resolving potential tax claims that result from these audits, which could result in material adjustments in our tax positions. We bookrecord provisions on the basis of the best current understanding; however, we could be required to bookrecord additional provisions in future periods for amounts that cannot currently be assessed. Our failure to do so and/or the need to increase our provisions for such claims could have a material adverse effect on our consolidated income statementresults of operations and our financial position.

Our operating results depend on our abilitycan also vary significantly due to obtain quality supplies on commercially reasonable terms. As we depend on a limited numberimpairment of suppliers for materials, equipmentgoodwill and technology, we may experience supply disruptions if suppliers interrupt supply, increase prices or experience material adverseother intangible assets incurred in the course of acquisitions and equity investments, as well as to impairment of tangible assets due to changes in their financial condition.the business environment.

Our abilityoperating results can vary significantly due to meet our customers’ demandimpairment of goodwill, other intangible assets and equity investments booked pursuant to manufactureacquisitions, joint venture agreements and the purchase of technologies and licenses from third parties. Because the market for our products depends upon obtaining adequate suppliesis characterized by rapidly changing

technologies, significant changes in the semiconductor industry, and the potential failure of quality materialsour business initiatives, our future cash flows may not support the value of goodwill and other intangibles registered in our Consolidated Balance Sheets. See “Item 5. Operating and Financial Review and Prospects — Overview — Critical Accounting Policies Using Significant Estimates — Impairment of goodwill”, “— Intangible assets subject to amortization” and “— Income (loss) on Equity-method Investments”.

We receive public funding, and a timely basisreduction in the amount available to us or demands for repayment could increase our costs and on commercially reasonable terms. Certain materials are available from a limited numberimpact our results of suppliers or only from a limited number of suppliersoperations.

To support our proprietary R&D for technology investments and investments in a particular region. We purchase certain materials whose prices on the world marketscooperative R&D ventures, we have fluctuated significantly in the past benefited and may fluctuate significantlyexpect to continue to benefit in the future. Although supplies forfuture from public funding, mainly from French, Italian and EU governmental entities. The public funding we receive is subject to periodic review by the materials we currently use are adequate, shortages could occur in various essential materials due to interruption of supply or increased demand in the industry. In addition, the costs of certain materials may increase due to market pressuresrelevant authorities and we may not be able to pass on such cost increases to our customers.

We also purchase semiconductor manufacturing equipment and third party licensed technology from a limited number of suppliers and providers and, because such equipment and technology are complex, it is difficult to replace one supplier or provider with another or to substitute one piece of equipment or type of technology for another. In addition, suppliers and providers may extend lead times, limit our supply, increase prices or change contractual terms related to certain manufacturing equipment and third party licensed technology, any of which could adversely affect our results. Furthermore, suppliers and technology providers tend to focus their investments on providing the most technologically advanced equipment, materials and technology and may not be in a position to address our requirements for equipment, materials or technology of older generations. Although we work closely with our suppliers and providers to avoid such shortages, there can be no assurance that we will continue to benefit from such programs at current levels or that sufficient alternative funding will be available if we lose such support. If any of the public funding programs we participate in are curtailed or discontinued and we do not encounter these problems inreduce the future.

Consolidation among our suppliers or vertical integration among our competitors may limit our ability to obtain sufficient quantities of materials, equipment and/or technology on commercially reasonable terms. If we are unable to obtain supplies of materials, equipment or technology in a timely manner or at all, or if such materials, equipment or technology prove inadequate or too costly, our results of operations could be adversely affected.

If our external silicon foundries orback-end subcontractors fail to perform,relevant R&D costs, this could adversely affect our business prospects.

We currently use external silicon foundries andback-end subcontractors forhave a portion of our manufacturing activities. If our external silicon foundries orback-end subcontractors are unable to satisfy our demand, or experience manufacturing difficulties, delays or reduced yields, our results of operations and ability to satisfy customer demand could suffer. Prices for these services also vary depending on capacity utilization rates at our external silicon foundries andback-end subcontractors, quantities demanded and product and process technology. Such outsourcing costs can vary materially and, in cases of industry shortages, they can increase significantly, negatively impacting our business prospects.

Our manufacturing processes are highly complex, costly and potentially vulnerable to impurities, disruptions or inefficient implementation of production changes that can significantly increase our costs and delay product shipments to our customers.

Our manufacturing processes are highly complex, require advanced and increasingly costly equipment and are continuously modified or maintained in an effort to improve yields and product performance and lower the cost of production. Impurities or other difficulties in the manufacturing process can lower yields, interrupt production or result in scrap. As system complexity and production changes have increased andsub-micron technology has become more advanced, manufacturing tolerances have been reduced and requirements for precision have become even more demanding. We have from time to time experienced bottlenecks and production difficulties that have caused delivery delays and quality control problems. There can be no assurance that that we will not experience bottlenecks or production, transition or other difficulties in the future.

We may experience quality problems from time to time that can result in decreased sales and operating margin and product liability or warranty claims.

We sell complex products that may not in each case comply with specifications or customer requirements or may contain design and manufacturing defects. Although our general practice is to contractually limit our liability to the repair, replacement or refund of defective products, we may face product liability, warranty, delivery failure, and/or other claims relating to our products that could result in significant expenses relating to compensation payments, product recalls or other actions to maintain good customer relationships, which could result in decreased sales and operating margin and other material adverse effectseffect on our business. CostsFurthermore, to receive public funding, we enter into agreements which require compliance with extensive regulatory requirements and set forth certain conditions relating to the funded programs. If we fail to meet the regulatory requirements or paymentsapplicable conditions, we may, make in connection with warranty and other claims or product recalls may adversely affectunder certain circumstances, be required to refund previously received amounts, which could have a material adverse effect on our results of operations. There can be no assurance that we will be successful in maintaining our relationships with customers with whom we incur quality problems. Furthermore, if litigation occurs we could incur significant costs and liabilities to defend ourselves against such claims and, if damages are awarded against us, there can be no assurance that our insurance policies will be available or adequate to protect us against such claims.

Our computer systems and networks are subject to attempted security breaches and other cybersecurity threats, which, if successful, could adversely impact our business.

We have, from time to time, experienced attempts by others to gain unauthorized access to our computer systems and networks. The reliability and security of our information technology infrastructure and software, and our ability to expand and continually update technologies in response to our changing needs is critical to our business. In the current environment,If there are numerouschanges in the public funding we receive this could increase the net costs for us to continue investing in R&D at current levels and evolving risks to cyber security, including criminal hackers, state-sponsored intrusions, industrial espionage, employee malfeasance, and human or technological error. Computer hackers and others routinely attempt to breach the security of technology products, services, and systems, and those of our customers, suppliers and providers of third party licensed technology, and some of those attempts may be successful. Such breaches could result in for example, unauthorized access to, disclosure, modification, misuse, loss, or destructiona material adverse effect on our results of our, our customer, or other third party data or systems, theft of sensitive or confidential data, including personal information and intellectual property, system disruptions, and denial of service. In the event of such breaches, we, our customers or other third parties could be exposed to potential liability, litigation, and regulatory action, as well as the loss of existing or potential customers, damage to our reputation, and other financial loss. In addition, the cost and operational consequences of responding to breaches and implementing remediation measures could be significant. As these threats continue to develop and grow, we have been adapting our security measures. We continue to increase the amount we allocate to implementing, maintaining and/or updating security systems to protect data and infrastructure and to raising security awareness among those having access to our systems, but these security measures cannot provide absolute security. We may also be adversely affected by security breaches related to our equipment providers and providers of third party licensed technology. As a global enterprise, we could also be impacted by existing and proposed laws and regulations, as well as government policies and practices related to cybersecurity, privacy and data protection. Additionally, cyber attacks or other catastrophic events resulting in disruptions to or failures in power, information technology, communication systems or other critical infrastructure could result in interruptions or delays to us, our customers, or other third party operations or services, financial loss, potential liability, and damage our reputation and affect our relationships with our customers and suppliers.

We may be subject to theft, loss, or misuse of personal data about our employees, customers, or other third parties, which could increase our expenses, damage our reputation, or result in legal or regulatory proceedings.

The theft, loss, or misuse of personal data collected, used, stored, or transferred by us to run our business could result in significantly increased security costs or costs related to defending legal claims. Global privacy legislation, including various EU directives regulating data privacy and security and the transmission of content using the Internet involving residents of the EU, enforcement, and policy activity in this area are rapidly expanding and creating a complex compliance regulatory environment. Costs to comply with and implement these privacy-related and data protection measures could be significant. In addition, our failure to comply with local and international privacy or data protection laws and regulations could result in proceedings against us by governmental entities or others.operations.

Some of our production processes and materials are environmentally sensitive, which could expose us to liability and increase our costs due to environmental, health and safety laws and regulations or because of damage to the environment.

We are subject to environmental, health and safety laws and regulations that govern various aspects, including the use, storage, discharge and disposal of chemicals, gases and other hazardous substances used in our

operations. Compliance with such laws and regulations could adversely affect our manufacturing costs or product sales by requiring us to acquire costly equipment, materials or greenhouse gas allowances, or to incur other significant expenses in adapting our manufacturing processes or waste and emission disposal processes. Furthermore, environmental claims or our failure to comply with present or future regulations could result in the assessment of damages or imposition of fines against us, suspension of production or a cessation of operations. Failure by us to control the use of, or adequately restrict the discharge of, chemicals or hazardous substances could subject us to future liabilities.

Loss of key employees could hurt our competitive position.

Our success depends to a significant extent upon our key executives and R&D, engineering, marketing, sales, manufacturing, support and other personnel. Our success also depends upon our ability to continue to identify, attract, retain and motivate highly trained and skilled engineering, technical and professional personnel in a competitive recruitment environment. For instance, in highly specialized areas, it may become more difficult to retain employees. We intend to continue to devote significant resources to recruit, train and retain qualified personnel. The competition for such employees, is intense,however, we may not be able to attract and retain these employees, which may affect our growth in future years and the loss of the services of any of these key personnel without adequate replacement or the inability to attract new qualified personnel could have a material adverse effect on us.

The interests of our controlling shareholder, which is in turn indirectly controlled by the French and Italian governments, may conflict with other investors’ interests. In addition, our controlling shareholder may sell our existing common shares or issue financial instruments exchangeable into our common shares at any time.

We have been informed that as of December 31, 2016,2018, STMicroelectronics Holding N.V. (“ST Holding”), owned 250,704,754 shares, or approximately 27.5%, of our issued common shares. ST Holding may therefore be in a position to effectively control the outcome of decisions submitted to the vote at our shareholders’ meetings, including but not limited to the appointment of the members of our Managing and Supervisory Boards.

We have been informed that ST Holding’s shareholders, each of which is ultimately controlled by the French or Italian government, are party to a shareholders agreement (the “STH Shareholders Agreement”), which governs relations between them. We are not a party to the STH Shareholders Agreement. See “Item 7. Major

Shareholders and Related Party Transactions — Major Shareholders”. The STH Shareholders Agreement includes provisions requiring the unanimous approval by the shareholders of ST Holding before ST Holding can vote its shares in our share capital, which may give rise to a conflict of interest between our interests and investors’ interests, on the one hand, and the (political) interests of ST Holding’s shareholders, on the other hand. Our ability to issue new shares or other securities giving access to our shares may be limited by ST Holding’s desire to maintain its shareholding at a certain level and our ability to buy back shares may be limited by ST Holding due to a Dutch law requiring one or more shareholders acquiring 30% or more of our voting rights to launch a tender offer for our outstanding shares.

The STH Shareholders Agreement also permits our respective French and Italian indirect shareholders to cause ST Holding to dispose of its stake in us at any time, thereby reducing the current level of their respective indirect interests in our common shares. Sales of our common shares or the issuance of financial instruments exchangeable into our common shares or any announcements concerning a potential sale by ST Holding could materially impact the market price of our common shares depending on the timing and size of such sale, market conditions as well as a variety of other factors.

Our shareholder structure and our preference shares may deter a change of control.

We have an option agreement in place with an independent foundation, whereby the foundation can acquire preference shares in the event of actions which the board of the independent foundation determines would be contrary to our interests, our shareholders and our other stakeholders and which in the event of a creeping acquisition or offer for our common shares are not supported by our Managing Board and Supervisory Board. In addition, our shareholders have authorized us to issue additional capital within the limits of the authorization by our general meetingGeneral Meeting of shareholders,Shareholders, subject to the requirements of our Articles of Association, without the need to seek a specific shareholder resolution for each capital increase. Accordingly, an issue of preference shares or new shares may make it more difficult for a shareholder to obtain control over our general meetingGeneral Meeting of shareholders.Shareholders. These anti-takeover provisions could substantially impede the ability of our shareholders to benefit from a change in control and, as a result, may materially adversely affect the market price of our ordinary shares and our investors’ ability to realize any potential change of control premium. See “Item 7. Major Shareholders and Related Party Transactions — Major Shareholders — Preference Shares.”Shares”.

Any decision to reduce or discontinue paying cash dividends to our shareholders could adversely impact the market price of our common shares.

On an annual basis, our Supervisory Board, upon the proposal of the Managing Board, may propose the distribution of a cash dividend to the general meeting of our shareholders. See “Item 8. Dividend Policy.”Policy”. Any reduction or discontinuance by us of the payment of cash dividends at historical levels could cause the market price of our common shares to decline.

We are required to prepare financial statements under IFRS and we also prepare Consolidated Financial Statements under U.S. GAAP, and such dual reporting may impair the clarity of our financial reporting.

We use U.S. GAAP as our primary set of reporting standards. Applying U.S. GAAP in our financial reporting is designed to ensure the comparability of our results to those of our competitors, as well as the continuity of our reporting, thereby providing our stakeholders and potential investors with a clear understanding of our financial performance. As we are incorporated in The Netherlands and our shares are listed on Euronext Paris and on the Borsa Italiana, we are subject to EU regulations requiring us to also report our results of operations and financial statements using IFRS.

As a result of the obligation to report our financial statements under IFRS, we prepare our results of operations using both U.S. GAAP and IFRS, which are currently not consistent. Such dual reporting can materially increase the complexity of our financial communications. Our financial condition and results of operations reported in accordance with IFRS will differ from our financial condition and results of operations reported in accordance with U.S. GAAP, which could give rise to confusion in the marketplace.

There are inherent limitations on the effectiveness of our controls.

There can be no assurance that a system of internal control over financial reporting, including one determined to be effective, will prevent or detect all misstatements. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance regarding financial statement

preparation and presentation. Projections of the results of any evaluation of the effectiveness of internal control over financial reporting into future periods are subject to inherent risk. The relevant controls may become inadequate due to changes in circumstances or the degree of compliance with the underlying policies or procedures may deteriorate.

Because we are subject to the corporate law of The Netherlands, U.S. investors might have more difficulty protecting their interests in a court of law or otherwise than if we were a U.S. company.

Our corporate affairs are governed by our Articles of Association and by the laws governing corporations incorporated in The Netherlands. The rights of our investors and the responsibilities of members of our Managing and Supervisory Boards under Dutch law are not as clearly established as under the rules of some U.S. jurisdictions. Therefore, U.S. investors may have more difficulty in protecting their interests in the face of actions by our management, members of our Managing and Supervisory Boards or our controlling shareholders than U.S. investors would have if we were incorporated in the United States.

Our executive offices and a substantial portion of our assets are located outside the United States. In addition, ST Holding and most members of our Managing and Supervisory Boards are residents of jurisdictions other than the United States. As a result, it may be difficult or impossible for shareholders to effect service within the United States upon us, ST Holding, or members of our Managing or Supervisory Boards. It may also be difficult or impossible for shareholders to enforce outside the United States judgments obtained against such persons in U.S. courts, or to enforce in U.S. courts judgments obtained against such persons in courts in jurisdictions outside the United States. This could be true in any legal action, including actions predicated upon the civil liability provisions of U.S. securities laws. In addition, it may be difficult or impossible for shareholders to enforce, in original actions brought in courts in jurisdictions located outside the United States, rights predicated upon U.S. securities laws.

We have been advised by Dutch counsel that the United States and The Netherlands do not currently have a treaty providing for reciprocal recognition and enforcement of judgments (other than arbitration awards) in civil and commercial matters. With respect to choice of court agreements in civil or commercial matters, it is noted that the Hague Convention on Choice of Court Agreements entered into force in the Netherlands, but has not entered into force in the United States. As a consequence, a final judgment for the payment of money rendered by any federal or state court in the United States based on civil liability, whether or not predicated solely upon the federal securities laws of the United States, will not be enforceable in The Netherlands. However, if the party in whose

favor such final judgment is rendered brings a new suit in a competent court in The Netherlands, such party may submit to The Netherlands court the final judgment that has been rendered in the United States. If The Netherlands court finds that the jurisdiction of the federal or state court in the United States has been based on grounds that are internationally acceptable and that proper legal procedures that are in accordance with the Dutch standards of proper administration of justice including sufficient safeguards (behoorlijke rechtspleging) have been observed, the court in The Netherlands would, under current practice, in principle give binding effect to the final judgment that has been rendered in the United States unless such judgment contradicts The Netherlands’ public policy.policy and provided that the judgment by the foreign court is not incompatible with a decision rendered between the same parties by a Dutch court, or with a previous decision rendered between the same parties by a foreign court in a dispute that concerns the same subject and is based on the same cause, provided that the previous decision qualifies for acknowledgment in the Netherlands. Even if such a foreign judgment is given binding effect, a claim based thereon may, however, still be rejected if the foreign judgment is not or no longer formally enforceable.

History and Development of the Company

STMicroelectronics N.V. was formed and incorporated in 1987 as a result of the combination of the semiconductor business of SGS Microelettronica (then owned by Società Finanziaria Telefonica (S.T.E.T.), an Italian corporation) and thenon-military business of Thomson Semiconducteurs (then owned by the formerThomson-CSF, now Thales, a French corporation). We completed our initial public offering in December 1994 with simultaneous listings on the Bourse de Paris (now known as “Euronext Paris”) and the New York Stock Exchange (“NYSE”). In 1998, we also listed our shares on the Borsa Italiana S.p.A. (“Borsa Italiana”).

We operated asSGS-Thomson Microelectronics N.V. until May 1998, when we changed our name to STMicroelectronics N.V. We are organized under the laws of The Netherlands, with our corporate legal seat in

Amsterdam, The Netherlands, and our head offices at WTC Schiphol Airport, Schiphol Boulevard 265, 1118 BH Schiphol, The Netherlands. Our telephone number there is+31-20-654-3210. Our headquarters and operational offices are managed through our wholly owned subsidiary, STMicroelectronics International N.V., and are located at 39 Chemin du Champ des Filles, 12281228 Plan-Les-Ouates, Geneva, Switzerland. Our main telephone number there is+41-22-929-2929. Our agent for service of process in the United States related to our registration under the U.S. Securities Exchange Act of 1934, as amended, is Corporation Service Company (CSC), 80 State Street, Albany, New York, 12207. Our operations are also conducted through our various subsidiaries, which are organized and operated according to the laws of their country of incorporation, and consolidated by STMicroelectronics N.V.

Business Overview

We are a global independent semiconductor company that designs, develops, manufactures and markets a broad range of products, including discrete and standard commodity components, application-specific integrated circuits (“ASICs”), full customfull-custom devices and semi-custom devices and application-specific standard products (“ASSPs”) for analog, digital and mixed-signal applications. In addition, we participate in the manufacturing value chain of smartcard products, which include the production and sale of both silicon chips and Smartcards.

Our diverse product portfolio is built uponbenefits from a unique, strong foundation of proprietary and differentiated leading-edge technologies. We use all of the prevalent function-oriented process technologies, including complementarymetal-on silicon oxide semiconductors (“CMOS”), bipolar andnon-volatile memory technologies. In addition, by combining basic processes, we have developed advanced systems-oriented technologies that enable us to produce differentiated and application-specific products, including our pioneering fully depletedsilicon-on-insulator(“FD-SOI”) technology offering superior performance and power efficiency compared to bulk CMOS, bipolar CMOS technologies(“Bi-CMOS”) and radio frequencysilicon-on-insulator(“RF-SOI”) for mixed-signal and high-frequency applications, and diffusedmetal-on silicon oxide semiconductor (“DMOS”) technology and bipolar,as well as a combination of Bipolar, CMOS and DMOS (“BCD”) and vertically integrated power (“VIPower”) technologies for intelligentsmart power applications, Silicon Carbidesilicon carbide (“SiC”) and gallium-nitride (“GaN”) for high-efficiency systems, micro-electro-mechanical systemsMicro-Electro-Mechanical Systems (“MEMS”), technologies for sensors and Actuators, embedded memory technologies for our microcontrollers and differentiated Imaging Technologies. This broad technology portfolio, a cornerstone ofTechnologies for our strategy, enables us to meet the increasing demand forSystem-on-Chip (“SoC”) andSystem-in-Package (“SiP”)imaging solutions. Complementing this depth and diversity of process and design technology is our IP portfolio which we also use to enter into broad patent cross-licensing agreements with other major semiconductor companies.

For our 20162018 Results of Operations, see “Item 5. Operating and Financial Review and Prospects — Results of Operations — Segment Information”.

Strategy

We are a global leader in the semiconductor market, serving a broad range of customers across different areas. Our strategy focuses on long-term value creation for the Company and its affiliated enterprises and takes into account the evolution of the markets we serve and the environment and

opportunities we see for the years to come. We focus on developing industry-leading products and solutions for the application areas which are expected to experience solid growth rates driven by long-term trends affecting peoples’ lives.trends. Trends include the evolution of population demographics, urbanization, workplace transformation, health and wellness, environmental awareness and increasing connectedness. These trends include population ageingrequire enablers such as autonomous systems, robotics, securely connected machines and concentrationpersonal devices, electrification of automobiles and infrastructure, Internet of Things (“IoT”) and more power efficient systems, which in cities, ubiquitous connectivity,turn drive the demand for the electronic components we develop and the need for more energy efficiency across all applications.manufacture.

Our products are used in a wide variety of applications, which can be broadly grouped into three areas:address four end markets: automotive, systems, industrial, systemspersonal electronics and consumer connected devices.communications equipment, computers and peripherals. We enable smarter driving by making vehicles safer, more environmentally friendly and more connected. We help make smarter homes, cities, workplaces and factories in which things can be done more efficiently and flexibly, in a more sustainable manner, safer and with a better experience for the people at the center. We enable creators of smart connected consumer devices to develop and take to market their devices quicklyquicker and more efficiently. In doing this we ensure that ST is found everywhere microelectronics make a positive and innovative contribution to people’s lives. By getting more from technology to get more from life, ST stands for life.augmented.

Product Information

Semiconductors are electronic components that serve as the building blocks inside modern electronic systems and equipment. Semiconductors, generally known as “chips,” combine multiple transistors on a single piece of material to form a complete electronic circuit. With our portfolio of semiconductor products, we serve customers across the spectrum of electronics applications with innovative solutions.

We have a portfolio of analog products, that can be used to design any system requiring semiconductors, including sensors, signal channel devices and output power stages — discrete and/or integrated — as well as complete power management blocks. Complemented by a comprehensive range of general purpose and application specific microcontrollers, ourOur analog devicesproducts can fulfill the needs of any design.

In addition, we have historically been one of the leading suppliers and innovators in the domain of semiconductor devices dedicated to automotive applications. We have a portfolio spanning complex power train, microcontrollers, audio and infotainment devices and body and convenience dedicated and standard functions as well as a broad offering of components for advanced driver assistance systems (ADAS), MEMS automotive sensors and SiC. The products designed and manufactured specifically for automotive applications are complemented by a largewide range of “automotive grade” products, both testeddesigns and guaranteed to perform under stringent automotive environmental conditions.systems.

We also have digital products that are at the heart of electronics systems, including microcontrollers, ASICs and specialized imaging sensors. Our full set of microcontrollers includes one of the industry’s broadest ranges of general-purpose devices serving all market segments, secure microcontrollers for mobile devices, wearables, banking, identification, industrial, automotive and Internet of Things (“IoT”)IoT markets and a series of embedded microprocessors for various applications inour strategic end markets (automotive, industrial, computingpersonal electronics and communications markets.equipment, computers and peripherals).

In addition, we have historically been one of the leading suppliers and innovators in the domain of semiconductor devices dedicated to automotive applications. We have a portfolio spanning complex power train, audio and infotainment devices and body and convenience dedicated and standard functions as well as a broad offering of components for advanced driver assistance systems (“ADAS”), dedicated automotive microcontrollers, MEMS automotive sensors and power driver, including SiC devices for hybrid and electric cars. The products designed and manufactured specifically for automotive applications are complemented by a large range of “automotive grade” standard products, both tested and guaranteed to perform under stringent automotive environmental conditions.

On top of the product design R&D spending, our principal investment and resource allocation decisions in the semiconductor business area are for expenditures on technology R&D as well as capital investments infront-end andback-end manufacturing facilities, which are planned at the corporate level; therefore, our product groups share common R&D for process technology and manufacturing capacity for some of their products.

Our reportable segments are as follows:

“Others” includes all the financial values related to the Imaging Product Division (including the sensors and modules from our Time of Flight technology), Subsystems and other products, as well as items not allocated to

the segments such as unused capacity charges, impairment and restructuring charges and other related closure costs, unused capacity charges,phase out andstart-up costs, and other unallocated expenses such as: management reorganization expenses, strategic or special research and development programs, and other minor unallocated expenses such as: certain corporate-level operating expenses, patent claims and litigation,litigations, and other costs that are not allocated to the segments.product groups, as well as operating earnings of Subsystems, assembly services and other revenue.

Below is a description of our main categories of products.

Automotive and Discrete Group (ADG)

Dedicated Automotive ICs

We are a top automotive semiconductor vendor supplying solutions to leading suppliers of carmakers worldwide. We combine an unparalleled platform of advanced technologies with an unswerving commitment to quality, and a thorough understanding of the automotive market gained through close collaboration with leading customers. Our automotive-solutions portfolio covers all key application areas in the car: Powertrain, Chassis, Safety and Security, including ADAS, Body Electronics, Infotainment and Infotainment.Connectivity.

For powertrain,Powertrain, we provide silicon solutions for the full range of engine-management systems: from motorbikes and scooters to the most advanceddrive-by-wire solutions. Developments in engine management are driven by both government emission regulations and energy concerns. We continue to work closely with major automotive OEMs, as we have for years,decades, to reduce fuel consumption and CO₂ emission via advanced

technologies such as Variable Valve Timing and Gasoline Direct Injection. ThanksInjection and Battery Management for hybrid and full electric cars. Due to the cooperation with certain leading car makers, our microcontrollers are currently in the electrical engines of leading hybrid and electric cars.

With regards to Chassis, we provide a broad range of solutions to increase vehicle-occupant safety, including devices for airbags, anti-lock brakes, traction control, electric power steering and active suspension systems. We are a leading supplier of chips for automotive airbags and anti-lock braking systems, which currently represent the largest portion of automotive safety electronics.

We are a leading player in advanced driver assistance systems (“ADAS”)ADAS that help avoid or minimize the severity of traffic accidents. We manufacture leading-edge products for vision and radar (both short range 24GHz and long range 77GHz) based systems that assist the driver with capabilities such as lane-departure warning, forward-collision warning, vision/radar fusion and pedestrian detection.detection including specific modular solutions for the mass market. We are also working on our first-generation modular offering for V2X(vehicle-to-vehicle andvehicle-to-infrastructure) as we progresssociety progresses toward semi- and fully-autonomous vehicles and Imaging Technologies for vehicles.

Today’s car body electronics involve a myriad of inter-networked electronic systems, from dome and door-zone controls, HVAC (heating, ventilation, andair-conditioning) systems, and seat controls to wiper and lighting controls. The penetration of electronics in the car is increasing all the time, as are the requirements for improved reliability and diagnostic capabilities. We address the concept of the “smart” junction box, which is an intelligent power and switching center for the vehicle that integrates functions and features from exterior and cabin lighting to wipers, with a comprehensive architecture that consists of upgradable hardware and software modules. And withWith our proprietary VIPower silicon technology and thorough application knowledge, we have become thea market leader in automotive lighting electronics, offering solutions for both exterior and interior lighting, from incandescent bulbs toLED- or HID (High-Intensity Discharge)-based systems.

Our car infotainment and navigation portfolio includes complete turnkey solutions for digital radio, navigation and telematics, and wireless connectivity in the car. We have leveraged our experience of more than 2030 years, at the forefront of AM/FM radio technology to lead in digital radio. We produce all of the semiconductor components for car radios — from the tuner through the baseband to multimedia processing and playback — and the Company’splayback. Ourcar-radio systems are optimized for harsh reception environments and minimized power consumption. Our portfolio of products for navigation also includes a family ofSystem-on-Chip solutions capable of receiving signals from multiple satellite navigation systems, including BeiDou, GPS, GALILEO, GLONASS and QZSS, to improve user position accuracy and navigation in poor satellite visibility conditions, such as in urban canyons.

Discrete and Power Transistor

Discrete and power transistors families include both power products and protection devices serving mainly Industrial, Power Management, Telecom, Computer &and Peripherals as well as automotiveAutomotive applications.

Leading-edge power technologies for both high-voltage andlow-voltage applications combined with a full package range and innovative die bonding technologies exemplify our innovation in power transistors. Our portfolio includes MOSFETs ranging from-500 35V to 15001800 V, silicon carbide (SiC)SiC MOSFETs featuring the industry’s highest temperature rating of 200 °C, IGBTs with breakdown voltages ranging from 350 V to 1300 V and a wide range of power bipolar transistors.transistors and, more recently,GaN-on- silicon components to address the 5G market. Our portfolio of protection devices supports all industry requirements for electrical overstress and electrostatic surge protection, lightning surge protection and automotive protection. Our protection devices have passed all certifications, meeting or exceeding international protection standards for electrical hazards on electronics boards found in the demanding automotive, computer, consumer, industrial and telecom markets.

Analog, MEMS and MEMSSensors Group (AMG)(AMS)

Analog, Smart Power, Low Power RF, Touch Screen Controllers

We develop a broad range of innovative Power, Smart Power and Analog ICs, to serve markets such as those relating to smart grid, cloud computing, automation, portable and power conversion. These product families include: Industrial, covering motion control, digital power conversion, energy management and lighting ICs as well asAC-DC power supply and industrial analog ASSP; Custom Analog ICs, which are mainly power management ICs (“PMIC”) for data storage, server and portable power management devices; and General Purpose Analog, which isincludes high end analog front endfront-end products as well as RF ICs.

We also develop a comprehensive range of operational amplifiers (bothlow-voltage and high-voltage), comparators and current-sense amplifiers. In addition to our portfolio of mainstream op ampsoperational amplifiers and comparators, we offer specific products for healthcare, industrial, and automotive applications, as well as a range of high-performance products specifically designed to meet the strict requirements of the wearable market.

Our connectivity ICs range from wireline to wireless solutions. We optimize our products for reliability of the communication channel and low power consumption. For wireline communication, we offer a complete family of transceivers compatible with different protocol standards used in the industry (PRIME, Meters and More, IEC61334-5-1, CAN and others). Ourultra-low power wireless solutions includeSub-1GHz RF chips (aka SPIRIT Family), latest generation Bluetooth Low Energy (aka BLENRGBlueNRG Family) andWi-Fi technologies. We sell to OEMs and Mass Market both Standard and Dedicated RF solutions, either chips or certified modules.

Our FingerTip^® family of Touch Screen Controllers provides true multi-touch capability, supporting unlimited simultaneous touches, and it is optimized for the extreme low power consumption. FingerTip also enhances multi-touch actions such aspinch-to-zoom, supports stylus operations and is compatible with both flat and curved display panel.

MEMS Sensors and Actuators

Our MEMS portfolio encompassesincludes both Sensors and Actuators. We sell our MEMS products in all marketa broad range of application fields, including mobile, gaming, computer, automotive, Industrial,industrial, healthcare and IoT.

MEMS Sensors include Motion MEMS (Accelerometers, Gyroscopes, Magnetic Sensors)(accelerometers, gyroscopes, magnetic sensors), Environmental Sensors (pressure, humidity and temperature) and Microphones. We offer a unique sensor portfolio, from discrete to fully-integrated solutions, high performance sensor fusion to improve the accuracy of multi-axis sensor systems in order to enable highly-demanding applications, such as indoor navigation and location-based services, optical image stabilization and high-level quality products.

MEMS Actuators include: i)(i) Thermal and Piezoelectric actuatorsActuators for 2D and 3D Printing in Consumer, Commercial and Industrial market applications; ii)(ii) Piezoelectric Actuators for applications such as smartphone camera Auto Focus application in the Mobile Market; and iii)MEMS loudspeakers; and (iii) Piezoelectric, Electrostatic and Electromagnetic actuatorsActuators for emerging VR/AR applications,ultra-low power depth cameras and LIDAR Systems for assisted Smart Driving.

Specialized Imaging Sensors

We also have a broad portfolio of Imaging solutions based on ST proprietary differentiated technologies such as FlightSense^TM, addressing various markets, and in particular the fast growing 3D sensing consumer and automotive applications. ST Imaging solutions are composed of both specialized components developed for dedicated customers’ systems; and full optical sense and illumination system solutions targeting multiple customers.

Microcontrollers and Digital ICs Group (MDG)

Microcontroller, Memory & Secure MCU

We have microcontrollers dedicated tofor general purpose and secure applications as well as small density serialnon-volatile memories. Our product portfolio contains a comprehensive range of microcontrollers, from robust entry-levellow-cost8-bit8-bit ST proprietary microcontrollers up to32-bit ARM^®-based Cortex^®-M0 and M0+, Cortex^®-M3, Cortex^®-M4, Cortex^®-M7 Flash microcontrollers with a wide choice of peripherals. We have also extended this range to include anultra-low-power MCU platform.platforms, various security and connectivity features.

The STM32 family of32-bit Flash microcontrollers based on the ARM^® Cortex^®-M processor isprocessors are designed to offer newsignificant degrees of freedom to microcontroller users. It offers aOur32-bit product range that combines very high performance, real-time capabilities, digital signal processing, andlow-power,low-voltage operation, while maintaining full integration and ease of development.

The unparalleled and large range of STM32 devices, based on an industry-standard core and accompanied by a vast choice of tools and software including support for Artificial Neural Networks, makes this family of products an ideal choice both for small projects and for entire platform decisions.a large range of applications.

We offer leading products for secure applications in traditional smartcard applications and embedded security applications. Throughout our 20+ year presence in the smartcard security industry, we have supplied the market’s most advanced technologies and solutions, with a continuous focus on innovation and the highest levels of security certification. Our expertise in security is a key to our leadership in the banking,pay-TV, mobile communication, identity, and transport fields. We also actively contribute to the emergence of new applications such as, among others, embedded SIM and secure mobile transactions on near field communication (“NFC”) for mobile phones, trusted computing, brand protection etc.and security for IoT devices. Our secure microcontroller product portfolio offers compliance with the latest security standards up to Common Criteria EAL6+, ICAO, and TCG1.2. Our secure microcontrollers cover a complete range of interfaces for both contact and contactless communication, including ISO 7816, ISO 14443 Type A & B, NFC, USB, SPI and I²C.

Our secure-microcontroller platforms rely on a highly-securehighly secure architecture combined with leading edgeleading-edge CPUs, such as ARM’s SC300 and SC000, and advanced embeddednon-volatile memory technologies such as40-nm embedded Flash and90-nm80-nm embedded EEPROM technologies.

We offer a wide range of small density serialnon-volatile memories. The serial EEPROM family ranges from 1 Kbit to 2 Mbits and offers different serial interfaces: I²C, SPI, Microwire. TheOur wide range of products are also automotive compliant and thin packages are available for applications where space is critical.

RF memory and transceiver products are based on the 13.56 MHz carrier frequency and are also compatible with the NFC technology. We offer one of the most comprehensive portfolios, which includes NFC/RFID transceivers, Dynamic NFC/RFID tags (also known as Dual Interface EEPROM) andNFC/RFID tags), Standalone RFID tags and Readers.NFC/RFID Readers operating also in the UHF bands.

Digital ASICs

We offer digital ASICs, including our proprietaryFD-SOI technology and mixed-process ASICs, for a broad range of applications including silicon photonics devices, addressing communications infrastructure systems. Our family of embedded microprocessor units (“MPUs”) offers high levels of computation powersystems as well as components for complex, networkedsatellite, terrestrial and very-short link high-speed communication display and control applications, usingstate-of-the-art architecture, silicon technology and intellectual property.

Others

Specialized Imaging Sensors

We also have a broad portfolio of imaging solutions, including technology we have developed and patented, such as FlightSense^TM. Our FlightSense^TM technology usesTime-of-Flight principles in order to propose a new generation of high-accuracy proximity and ranging sensors. FlightSense^TM technology can be used in a host of application areas such as communication and consumer, home appliance, automotive and industrial, where accurate ranging, that is target reflectance independent, is required, as conventional infrared proximity sensor devices cannot output an absolute range measure in the same manner.links.

Alliances with Customers and Industry Partnerships

We believe that alliances with customers and industry partnerships are critical to our success in the semiconductor industry. Customer alliances provide us with valuable systems and applicationknow-how and access to markets for key products, while allowing our customers to gain access to our process technologies and manufacturing infrastructure. We are actively working to expand the number of our customer alliances, targeting OEMs in the United States, in Europe and in Asia.key global OEMs.

From time to time we collaborate with other semiconductor industry companies, research organizations, universities and suppliers to further our R&D efforts. Such collaboration provides us with a number of important benefits, including the sharing of costs, reductions in our own capital requirements, acquisitions of technicalknow-how and access to additional production capacities.

Customers and Applications

We design, develop, manufacture and market thousands of products that we sell to thousands ofover 100,000 customers. We emphasize balance in our product portfolio, in the applications we serve and in the regional markets we address. Our major customers include Apple, Robert Bosch, Cisco, Conti, Delta,Continental, Hewlett-Packard, Huawei, Mobileye, Samsung, Seagate and Western Digital. To many of our key customers we provide a wide range of products, including application-specific products, discrete devices, memory products and programmable products. Our broad portfolio helps foster close relationships with customers, which provides opportunities to supply such customers’ requirements for multiple products, including discrete devices, programmable products and memory products. We also sell our products through distributors and retailers.

Sales, Marketing and Distribution

Our sales and marketing is organized by a combination of country/area coverage and key accounts coverage with the primary objective being to accelerateof accelerating sales growth and gaingaining market share, particularly with regards to: strengthening the effectiveness of the development of our global and major local accounts; boosting demand creation through an enhanced focus on geographical coverage;coverage with strong technical expertise, supported in the mass market by our distribution channel and local initiatives; and establishing regional sales and marketing teams that are fully aligned with our strategic end markets (automotive, industrial, personal electronics and communications equipment, computers and peripherals) product lines.

We have three regional sales organizations: EMEA;organizations reporting to a global head of Sales & Marketing: Americas; Asia Pacific; and Asia Pacific.EMEA. Our regional sales organizations have a similar structure to enhance coordination ingo-to-market activities and are strongly focused on revenue growth. The sales and marketing activities performed by our regional sales organizations are supported by product marketing that is carried outorganized by each product group under the direct supervision of sales, which also includes product development functions. This matrix system reinforces our sales and marketing activities and our broader strategic objectives. An important componentobjective of our regional sales and marketing efforts is to expandexpanding our customer base, which we seek to doachieve by adding sales representatives, regional competence centers and new generations of electronic tools forimproved online customer support.

We also have our Mass Market and Online Marketing Programs organization, which helps to provide consistency and coordination of key activities associated with mass market development by working in closeco-operation with the regions and product lines. This organization covers several important responsibilities, such as mass market customer programs, mass market applications, global distribution administration, online marketing and mass market tools enablement.

In addition, we engage distributors and sales representatives to distribute and promote our products around the world. Typically, distributors handle a wide variety of products, including those that compete with ours, and fulfill orders and service many of our customers. Most of our sales to distributors are made under agreements allowing for price protection and/or the right of return on unsold merchandise. We generally recognize revenues upon the transfer of ownership of the goods at the contractual point of delivery. Sales representatives, on the other hand, generally do not offer products that compete directly with our products, but may carry complementary items manufactured by others. Sales representatives do not maintain a product inventory. Theirinventory and their customers place large quantity orders directly with us and are referred to distributors for smaller orders.

We also engage in mass market and online marketing programs, coordinated across our three regions, to provide consistency and coordination of key activities associated with mass market development.

At the request of certain of our customers, we also sell and deliver our products to electronics manufacturing services (“EMS”) companies, which, on a contractual basis with our customers, incorporate our products into the application specific products they manufacture for our customers. Certain customers require us

In furtherance of our strong commitment to hold inventory on consignment in their hubsquality, our sales organizations include personnel dedicated to close monitoring and only purchase inventory when they require it for their own production. This may lead to delays in recognizing revenues, as revenue recognition will occur, within a specific periodresolution of time, at the actual withdrawal of the products from the consignment inventory, at the customer’s option.quality related issues.

For a breakdown of net revenues by segment and geographic region for the last three fiscal years, see “Item 5. Operating and Financial Review and Prospects”.

Research and Development

Since our creation,formation, we have maintained a solid commitment to R&D. Almostinnovation. Aboutone-fifthone-sixth of our employees work in R&D foron product design/development and technology and, in 2016,2018, we spent approximately 19%14.5% of our

net revenuerevenues on R&D. Our innovationinnovations in semiconductor technology as well as in hardware and software contribute to our makingthe creation of successful products that creategenerate value for us and our customers. Our complete design platforms, including a large selection of IPsIP and silicon-proven models and design rules, enable the fast development of products designed to meet customer expectations in terms of reliability, quality, competitiveness in price andtime-to-market. WeThrough our R&D efforts, we contribute to making our customers’ products more efficient, more appealing, more reliable and safer. Our technology R&D strategy is based on the development of differentiated technologies, allowing for a unique offer in terms of new products and enabling new applications opportunities.

We draw on a rich pool of chip fabrication technologies, including advanced CMOS,FD-SOI, CMOS, specialized imaging, embeddednon-volatile memories, mixed-signal, analog, MEMS, Smart power SiC and MEMSGaN processes. This is well embedded in our strong packaging technologies portfolio such as high pin count BGA, Wafer level packaging, highly integrated sensor packages and leadframe packages power processes.products. We combine bothfront-end andback-end manufacturing and technology R&D under the same organization to ensure a smooth flow of information between theour R&D and manufacturing organizations. We leverage significant synergies and shared activities between our product groups to cross-fertilize them. Technology R&D expenses are allocatedWe also use silicon foundries, especially for advanced CMOS beyond the28-nm node that we do not plan to the relevant product groups on the basis of the estimated efforts.manufacture nor develop internally.

We have advanced R&D centers which offer us a significant advantage in quickly and cost effectively introducing products. Furthermore, we have established a strong culture of partnershippartnerships and through the years have created a network of strategic collaborations with key customers, suppliers, competitors, and leading universities and research institutes around the world. See “Item 4. Information on the Company — Alliances with Customers and Industry Partnerships”. We also play leadership roles in numerous projects running under the European Union’s IST (Information Society Technologies) programs and weprograms. We also participate in certain R&D programs established by the EU, individual countries and local authorities in Europe (primarily in France and Italy). See “Item 4. Information on the Company — Public Funding”.

We believe that market driven R&D foundedbased on leading edgeleading-edge products and technologies is critical to our success. We devote significant effort to R&D because we believe such investment can be leveraged into competitive advantages. New developments in semiconductor technology can make end products significantly cheaper, smaller, faster, more reliable and embedded than their predecessors, with differentiated functionalities. They can enable significant value creation opportunities with their timely appearance on the market. The total amount of our R&D expenses in the past three fiscal years was $1,336$1,398 million, $1,425$1,296 million and $1,520$1,331 million in 2016, 20152018, 2017 and 2014,2016, respectively. For more information on our R&D expenses, see “Item 5. Operating and Financial Review and Prospects — Results of Operations — Research and Development Expenses”.

Property, Plants and Equipment

We currently operate 13 main manufacturing sites around the world. The table below sets forth certain information with respect to our current manufacturing facilities, products and technologies.Front-end manufacturing facilities are fabs andback-end facilities are assembly, packaging and final testing plants.

At the end of 2016,December 31, 2018, ourfront-end facilities had a total maximum capacity of approximately 120,000125,470 200 mm equivalent wafer starts per week. The number of wafer starts per week varies from facility to facility and from period to period as a result of changes in product mix. Our advanced 300 mm wafer fabrication facility in Crolles, France is expanding within existing infrastructure capacity to support the production ramp up of new technologies.

We own all of our manufacturing facilities, but certain facilities (Muar, Malaysia; Shenzhen, China; and Toa Payoh and Ang Mo Kio, Singapore) are built on land which are the subject of long-term leases.

We have historically subcontracted a portion of total manufacturing volumes to external suppliers. In 2016,2018, we purchased approximately 8%11% from external foundries of our total silicon production. Our plan is to continue sourcing silicon from external foundries to give us flexibility in supporting our growth.

At December 31, 2016,2018, we had approximately $402$628 million in outstanding commitments for purchases of equipment and other assets for delivery in 2017.2019. In 2016,2018, our capital spending, net of proceeds, was $607$1,262 million compared to $467$1,298 million in 2015.2017. In the 2014-20162016-2018 period the ratio of capital investment spending to net revenues was about 7.4%12.7%. For more information, see “Item 5. Operating and Financial Review and Prospects — Financial Outlook: Capital Investment”.

Intellectual Property (IP)

Our success depends in part on our ability to obtain patents, licenses and other IP rights to protect our proprietary technologies and processes. IP rights that apply to our various products include patents, copyrights,

trade secrets, trademarks and mask work rights. We currently own approximately 16,00017,790 patents and pending patent applications, corresponding to over 9,500approximately 9,573 patent families (each patent family containing all patents originating from the same invention), including approximately 500over 549 original new patent applications filed in 2016.2018.

We believe that our IP represents valuable assets. We rely on various intellectual property laws, confidentiality procedures and contractual provisions to protect our IP assets and enforce our IP rights. To optimize the value of our IP assets, we have engaged in licensing our design technology and other IP, including patents, when consistent with our competitive position and our customers’ interests. We have also entered into broad-scope cross-licenses and other agreements which enable us to design, manufacture and sell semiconductor products using the IP rights of third parties and/or operating within the scope of IP rights owned by third parties.

From time to time, we are involved in IP litigation and infringement claims. See Note 2324 to our Consolidated Financial Statements and Item 3. “Key Information — Risk Factors”. Regardless of the validity or the successful assertion of such claims, we may incur significant costs with respect to the defense thereof, which could have a material adverse effect on our results of operations, cash flow or financial condition.

Backlog

Our sales are made primarily pursuant to standard purchase orders that are generally booked from one to twelve months in advance of delivery. Quantities actually purchased by customers, as well as prices, are subject to variations between booking and delivery and, in some cases, to cancellation due to changes in customer needs or industry conditions. During periods of economic slowdown and/or industry overcapacity and/or declining selling prices, customer orders are not generally made far in advance of the scheduled shipment date. Such reduced lead time can reducediminish management’s ability to forecast production levels and revenues. When the economy rebounds, our customers may strongly increase their demands, which can result in capacity constraints due to our inability to matcha time lag when matching manufacturing capacity with such demand.

In addition, our sales are affected by seasonality, with the first quarter generally showing lowest revenue levels in the year, and the third or fourth quarter historically generating higher amounts of revenues.revenues partly as a result of the seasonal dynamics for smartphone applications dynamics.

We also sell certain products to key customers pursuant to frame contracts. Frame contracts are annual contracts with customers setting forth quantities and prices on specific products that may be ordered in the future. These contracts allow us to schedule production capacity in advance and allow customers to manage their inventory levels consistent withjust-in-time principles while shortening the cycle times required to produce ordered products. Orders under frame contracts are also subject to a high degree of volatility, because they reflect expected market conditions which may or may not materialize. Thus, they are subject to risks of price reduction, order cancellation and modifications as to quantities actually ordered resulting in inventorybuild-ups.

Furthermore, developing industry trends, including customers’ use of outsourcing and their deployment of new and revised supply chain models, may reduce our ability to forecast changes in customer demand and may increase our financial requirements in terms of capital expenditures and inventory levels.

We entered 20162018 with a backlog lowerhigher than we had entering 2015.2017. For 2017,2019, we entered the year with a backlog higherlower than what we had entering 2016.2018.

Competition

Markets for our products are intensely competitive. WhileWe compete with major international semiconductor companies and while only a few companies compete with us in all of our product lines, we face significant competition infrom each of them. We compete with major international semiconductor companies. Smaller niche companies are also increasing their participation in the semiconductor market, and semiconductor foundry companies have expanded significantly, particularly in Asia. Competitors include manufacturers of standard semiconductors, ASICs and fully customized ICs, including both chip and board-level products, as well as customers who develop their own IC products and foundry operations. Some of our competitors are also our customers. We compete in different product lines to various degrees on the basis of price, technical performance, product features, product system compatibility, customized design, availability, quality and sales and technical support. In particular, standard products may involve greater risk of competitive pricing, inventory imbalances and severe market fluctuations than differentiated products. Our ability to compete successfully depends on elementsfactors both within and outside our control, including successful and timely development of new products and manufacturing processes, product performance and quality, manufacturing yields and product availability, customer service, pricing, industry trends and general economic trends.

The semiconductor industry is intensely competitive and characterized by the high costs associated with developing marketable products and manufacturing technologies as well as high levels of investment in production capabilities. As a result, the semiconductor industry has experienced, and is expected to continue to experience, significant vertical and horizontal consolidation among our suppliers, competitors and customers, which could lead to erosion of our market share, impact our capacity to compete and require us to restructure our operations. See Item 33. “Key Information — Risk Factors”.

Organizational Structure and History

We are organized in a matrix structure with geographic regions interacting with product lines, both supported by shared technology and manufacturing operations and by central functions, designed to enable us to be closer to our customers and to facilitate communication among the R&D, production, marketing and sales organizations.

While STMicroelectronics N.V. is the parent company, we conduct our global business through STMicroelectronics International N.V. and also conduct our operations through service activities from our subsidiaries. We provide certain administrative, human resources, legal, treasury, strategy, manufacturing, marketing and other overhead services to our consolidated subsidiaries pursuant to service agreements for which we recover the cost.

The following table lists our consolidated subsidiaries and our percentage ownership as of December 31, 2016:2018:

The following table lists our principal equity-method investments and our percentage ownership as of December 31, 2016:2018:

Public Funding

We receive public funding mainly from French, Italian and European UnionEU governmental entities. Such funding is generally provided to encourage R&D activities, industrialization and local economic development. Public funding in France, Italy and Europe generally is open to all companies, regardless of their ownership structure or country of incorporation. The conditions for the receipt of government funding may include eligibility restrictions, approval by EU authorities, annual budget appropriations, compliance with European UnionEU regulations, royalties or contingent return provisions as well as specifications regarding objectives and results. The approval process for such funding may be quite long, up to several years. Certain specific contracts require compliance with extensive regulatory requirements and set forth certain conditions relating to the funded programs. There could be penalties if these objectives are not fulfilled. Other contracts contain penalties for late deliveries or for breach of contract, which may result in repayment obligations. Our funding programs are classified under three general categories: funding for research and development activities, capital investment for pilot lines and loans. We also benefit from tax credits for R&D activities in several countries (notably in France) as theywhich are generally available to all companies. See “Item 5. Operating and Financial Review and Prospects — Results of Operations” and the Notes to our Consolidated Financial Statements.

The main programs for R&D in which we are involved include:(i) Pan-European program on Nanoelectronics Technology and Applications (PENTA); (ii) EU R&D projects within Horizon 2020 (the European Union’s research and innovation framework); (iii) Electronic Components and Systems for European Leadership (ECSEL) initiative, which combines all electronics related R&D activities and is operated by joint undertakings formed by the European Union, somecertain member states and industry; and (iv) national or regional programs for R&D and for industrialization in the electronics industries involving many companies and laboratories. Thepan- European programs cover a period of several years, while national or regional programs in France and Italy are subject mostly to annual budget appropriation.

In our role as Coordinator and Project Leader of Nano2017, we havehad been allocated an overall funding budget of about €400 million for the period 2013-2017,2013-2018, which was subject to the conclusion of agreements every year with the public authorities and linked to the achievement of technical parameters and objectives. See “Item 5. OperatingA portion of the Nano2017 program was subject to a payback clause (“financial return”), depending on the future accumulated sales for certain products within the scope of the funded program on the period from 2018 to 2023.

The financial return corresponded to the payment in 2024 of the original funded amount (€37 million) multiplied by a rate from 0% to 250%, depending on the cumulative amount of future sales. As such, the criteria for granting income recognition were not met and Financial Review and Prospects”.an accrual amounting to $42 million was posted as of December 31, 2018. We believe the Nano2017 R&D program, will strengthenwhich expired in April 2018, has strengthened our leadership in key technologies such asFD-SOI(low-power, high-performance processing), imagers and photonic sensors and embeddednon-volatile memories. These technologies are at the core of our digital portfolio which includes, among others, microcontrollers, imaging, analog and mixed signal, digital automotive and ASICs.

In December 2018, the European Commission announced the approval of Important Projects of Common European Interest (“IPCEI”), aPan-European project initiated to foster research and innovation in microelectronics to be funded by Germany, France, Italy and the U.K. We have no visibility whether a new multi-year programexpect to participate in IPCEI for R&D fundingthe period 2018 until 2022 in France orand until 2024 in other countries could be adopted beyond 2017, based on our future R&D plan and available instruments. See Item 3 “Key Information — Risk Factors.”Italy.

Suppliers

We use three mainprimary critical types of suppliers in our business: (i) equipment suppliers, (ii) material suppliers and (iii) external silicon foundries andback-end subcontractors. We also purchase third party licensed technology from a limited number of providers.

In thefront-end process, we use steppers, scanners, tracking equipment, strippers, chemo-mechanical polishing equipment, cleaners, inspection equipment, etchers, physical and chemical vapor-deposition equipment, implanters, furnaces, testers, probers and other specialized equipment. The manufacturing tools that we use in theback-end process include bonders,burn-in ovens, testers and other specialized equipment. The quality and technology of equipment used in the IC manufacturing process defines the limits of our technology. Demand for increasingly smaller chip structures means that semiconductor producers must quickly incorporate the latest advances in process technology to remain competitive. Advances in process technology cannot occur without commensurate advances in equipment technology, and equipment costs tend to increase as the equipment becomes more sophisticated.

Our manufacturing processes use many materials, including silicon and SiC wafers, lead frames, mold compound, ceramic packages and chemicals and gases. The prices of many of these materials are volatile due to the specificity of the market. We have therefore adopted a “multiple sourcing strategy” designed to protect us from the risk of price increases. The same strategy applies to supplies for the materials used by us to avoid potential material disruption of essential materials. Our “multiple sourcing strategy”, our Financial Risk Monitoring (FRISK) as well as the robustness of our supply chain and strong partnership with suppliers are intended to mitigate these risks. See Item 3. “Key Information — Risk Factors”.

Finally, we also use external subcontractors to outsource wafer manufacturing as well asand assembly and testing of finished products. See “— Property, Plants and Equipment” above.

Environmental Matters

We are subject to a variety of environmental, health and safety laws and regulations in the jurisdictions where we operate whichoperate. Such laws and regulations govern, among other things, the use, storage, discharge and disposal of chemicals and other hazardous substances, emissions and wastes, as well as the investigation and remediation of soil and ground water contamination. We are also required to obtain environmental permits, licenses and other forms of authorization, or give prior notification, in order to operate.

We adopt a rigorous approach to managing our business operations in an environmentally responsible way. Consistent with our sustainability strategy, we have established proactive environmental policies with respect to the handling of chemicals, emissions, waste disposals and other substances of concern from our manufacturing operations. Company-wide weWe are certified to be in compliance with quality standard ISO 9001. Across9001on aCompany-wide basis. We implement the highest standards across our manufacturing activities and supply chain, we implement the highest standards.chain. The majority of our sites are ISO 14001 certified and EMAS (Eco Management and Audit Scheme) validated. Furthermore, all of ourfront-end manufacturing sites are ISO 50001 certified.

We believe that in 20162018 our activities complied with then-applicable environmental regulations in all material respects. We have engaged outside consultants to audit all of our environmental activities and have created environmental management teams, information systems and training. We have also instituted environmental control procedures for processes used by us as well as our suppliers. In 2016,2018, there were no material environmental claims made against us.

Overview

The following discussion should be read in conjunction with our Consolidated Financial Statements and Notes thereto included elsewhere in this Form20-F. The following discussion contains statements of future expectations and other forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, or Section 21E of the Securities Exchange Act of 1934, each as amended, particularly in the sections “— Critical Accounting Policies Using Significant Estimates”, “— Business Outlook”, “— Liquidity and Capital Resources” and “— Financial Outlook: Capital Investment”. Our actual results may differ significantly from those projected in the forward-looking statements. For a discussion of factors that might cause future actual results to differ materially from our recent results or those projected in the forward-looking statements in addition to the factors set forth below, see “Cautionary Note Regarding Forward-Looking Statements” and Item 3. “Key Information — Risk Factors”. We assume no obligation to update the forward-looking statements or such risk factors.

Critical Accounting Policies Using Significant Estimates

The preparation of our Consolidated Financial Statements in accordance with U.S. GAAP requires us to make estimates and assumptions. The primary areas that require significant estimates and judgments by us include, but are not limited to:

We base the estimates and assumptions on historical experience and on various other factors such as market trends, market information used by market participants and the latest available business plans that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities. While we regularly evaluate our estimates and assumptions, the actual results we experience could differ materially and adversely from our estimates.

We believe the following critical accounting policies require us to make significant judgments and estimates in the preparation of our Consolidated Financial Statements:

Revenuerecognition. Our policy isUpon the adoption of the new guidance, arrangements with customers are considered contracts if all the following criteria are met: (a) parties have approved the contract and are committed to recognize revenues from salesperform their respective obligations; (b) each party’s rights regarding the goods or services to be transferred can be

identified; (c) payment terms related to the goods or services to be transferred can be identified; (d) the contract has commercial substance and (e) collectability of products to our customers whensubstantially all of the following conditions have been met: (a) persuasive evidenceconsideration is probable. We recognize revenue from products sold to a customer, including distributors, when we satisfy the performance obligation by transferring the control over a product to the customer. In certain circumstances, we may render services to the customer. These services usually correspond to a single performance obligation which is satisfied over a short period of an arrangement exists; (b) delivery has occurred; (c) the selling pricetime. The payment terms typically range between 30 and 90 days. Certain of our customers require us to hold inventory as consignment in their hubs and only purchase inventory when they require it for their own protection. Revenue for sales of such inventory is fixed or determinable; and (d) collection is reasonably assured. Our revenue recognition usually occursrecognized when, at the time of shipment.customer’s option, the products are withdrawn from the consignment.

Consistent with standard business practice in the semiconductor industry, price protection is granted to distribution customers on their existing inventory of our products to compensate them for declines in market prices. We accrue a provision for price protection based on a rolling historical price trend computed on a monthly basis as a percentage of gross distributor sales. This historical price trend represents differences in recent months between the invoiced price and the final price to the distributor, adjusted if required, to accommodate a significant change in the current market price. We record the accrued amounts as a deduction of revenue at the time of our sale. The short outstanding inventory time period, our visibility into the inventory product pricing and our long distributor pricing history have enabled us to reliably estimate price protection provisions atperiod-end. If market conditions differ from our assumptions, this could have an impact on future periods. In particular, if market conditions were to deteriorate, net revenues could be reduced due to higher product returns and price reductionsWe record the accrued amounts as a deduction of “Net sales” in the consolidated statements of income at the time these adjustments occur, which could adverselyof the sale. The new accounting guidance has had no impact our profitability. From time to time terms of protection to distributors could be extended in respect to the standard term in which cases we accordingly accrue a specific provision against billing to defer the revenues recognition.on this accounting practice.

Our customers occasionally return our products for technical reasons. Our standard terms and conditions of sale provide that if we determine that products do not conform, we will repair or replace thenon-conforming products, or issue a credit note or rebate of the purchase price. In certain cases, when the products we have supplied have been proven to be defective, we have agreed to compensate our customers for claimed damagesQuality returns are identified shortly after sale in order to maintain and enhance our business relationship.customer quality control testing. Quality returns are usually associated withend-user customers, not with distribution channels. Quality returns are identified shortly after saleWe record the accrued amounts as a deduction of “Net sales” in customer quality control testing. We provide for such returnsthe consolidated statements of income, using past history and current conditions to form a reasonable estimate of future returns. We record the accrued amounts as a reduction of revenue.The new accounting guidance has had no impact on this accounting practice.

Our insurance policy relating to product liability covers third party physical damagedamages and bodily injury, and indirect financial damages as well as immaterialnon-consequential damages caused by defective products. However, weWe record a provision for warranty costs as a charge against cost“Cost of salessales” in the consolidated statements of income, based on historical trends of warranty costs incurred as a percentage of sales, which we havemanagement had determined to be a reasonable estimate of the probable losses to be incurred for warranty claims in a period. The new accounting guidance has no impact on this accounting practice. Any potential warranty claims are subject to our determination that we are at fault for damages, and that such claims usually must be submitted within a short period of time following the date of sale. This warranty is given in lieu of all other warranties, conditions or terms expressed or implied by statute or common law. Our contractual terms and conditions typically limit our liability to the sales value of the products that gave rise to the claims.

While the majority of ourIn addition to product sales, agreements contain standard terms and conditions, we may, from time to time, enter into agreements that contain multiple elementsarrangements with customers consisting in transferring licenses or terms and conditions which require judgments. In such cases, following the guidance related to license services. The revenue recognition,generated from these arrangements are reported on the arrangement consideration is allocated to the different elements based on their respective selling prices determined using vendor-specific objective evidence, third party evidence or our best estimatesline “Other revenues” of the selling priceconsolidated statement of the separable deliverablesincome. Other revenues also include patent royalty income, sale of scrap materials and the applicable revenue recognition criteria are applied to each of the separate elements. These arrangements generally do not include performance-, cancellation-, termination-, or refund-type provisions.manufacturingby-products.

Tradeaccountsreceivable. We maintain an allowance for doubtful accounts for potential estimated losses resulting from our customers’ inability to make required payments. We base our estimates on historical collection trends and record an allowance accordingly. Furthermore,In addition, we evaluate our customers’ financial condition periodically and record an allowance for any specific account we consider as doubtful. In 2016,2018, we did not record any new material specific charge related to doubtful customers. If we receive information that the financial condition of our customers has deteriorated, resulting in an impairment of their ability to make payments, additional allowances could be required.

Businesscombinationsandgoodwill. The purchase accounting method applied to business combinations requires extensive use of estimates and judgments to allocate the purchase price to the fair value of the identifiable assets acquired and liabilities assumed. If the assumptions and estimates used to allocate the purchase

price are not correct or if business conditions change, purchase price adjustments or future asset impairment charges could be required. On July 28, 2016, we completed a transaction to acquire ams’ (SIX: AMS) assets and workforce related to Near-Field Communication (NFC) and Radio-frequency identification (RFID) Reader business. The acquired business, combined with our secure microcontrollers, positions us for a significant growth opportunity, with a complete portfolio ofbest-in-class technologies, products and competencies that comprehensively address the full range of the NFC and RFID markets for a wide customer base. The purchase consideration included a cash payment of $78 million plusearn-out contingent to future results up to $37 million and the acquisition resulted in $42 million goodwill recognition. At December 31, 2016,2018, the value of goodwill in our Consolidated Balance Sheet amounted to $116$121 million.

Impairmentofgoodwill. Goodwill recognized in business combinations is not amortized but is tested for impairment annually in the third quarter, or more frequently if a triggering event indicating a possible

impairment exists. Goodwill subject to potential impairment is tested at a reporting unit level. This impairment test determines whether the fair value of each reporting unit for which goodwill is allocated is lower than the total carrying amount of relevant net assets allocated to such reporting unit, including its allocated goodwill. If lower, the implied fair value of the reporting unit goodwill is then compared to the carrying value of the goodwill and an impairment charge is recognized for any excess. In determining the fair value of a reporting unit, we use significant management judgments and estimates are used in forecastingto forecast the future discounted cash flows associated with the reporting unit, including: the applicable industry’s sales volume forecast and selling price evolution, the reporting unit’s market penetration and its revenues evolution, the market acceptance of certain new technologies and products, the relevant cost structure, the discount rates applied using a weighted average cost of capital and the perpetuity rates used in calculating cash flow terminal values. Our evaluations are based on financial plans updated with the latest available projections of the semiconductor market, our sales expectations and our costs evaluation, and are consistent with the plans and estimates that we use to manage our business. It is possible, however, that the plans and estimates used may prove to be incorrect, and future adverse changes in market conditions, changes in strategies, lack of performance of major customers or operating results of acquired businesses that are not in line with our estimates may require impairments.

We performed our annual impairment test of goodwill during the third quarters of 2016, 20152018, 2017 and 20142016 and concluded that there was no impairment.goodwill impairment loss. Impairment charges could result from new valuations triggered by changes in our product portfolio or strategic alternatives, particularly in the event of a downward shift in future revenues or operating cash flows in relation to our current plans or in case of capital injections by, or equity transfers to, third parties at a value lower than the current carrying value.

Intangibleassetssubjecttoamortization. Intangible assets subject to amortization include intangible assets purchased from third parties recorded at cost and intangible assets acquired in business combinations recorded at fair value, comprised of technologies and licenses, and computer software. Intangible assets with finite useful lives are reflected net of any impairment losses and are amortized over their estimated useful life. We evaluate the carrying value of intangible assets with finite useful lives whenever changes in circumstances indicates that the carrying amount might not be recoverable. An impairment loss is recognized in the Consolidated Statements of Income for the amount by which the carrying amount exceeds fair value. We evaluate the remaining useful life of an intangible asset at each reporting date to determine whether evensevents and circumstances warrant a revision to the remaining period of amortization. Our evaluations are based on financial plans updated with the latest available projections of growth in the semiconductor market and our sales expectations. They are consistent with the plans and estimates that we use to manage our business. It is possible, however, that the plans and estimates used may be incorrect and that future adverse changes in market conditions or operating results of businesses acquired may not be in line with our estimates and may therefore require us to recognize impairment charges on certain intangible assets.

During 2018, we recorded a $2 million impairment charge on acquired technologies for which it was determined that they had no future alternative use. During 2017, we did not record any impairment charges on intangible assets. During 2016, we impaired $4 million of acquired technologies for which it was determined that they had no future alternative future use. During 2015, we impaired certain intangible assets amounting to $6 million, due to the fact that their projected cash flows, over their remaining useful life, were less than their carrying value. Additionally, we recognized impairments for $7 million and $3 million of acquired technologies in the third and fourth quarter of 2015 respectively, for which we determined that they had no alternative future use. During 2014, we recorded impairment charges of $24 million, primarily on digital dedicated intangible assets.

We will continue to monitor the carrying value of our assets. If market conditions deteriorate, this could result in futurenon-cash impairment charges against earnings. Further impairment charges could also result from new valuations triggered by changes in our product portfolio or by strategic transactions, particularly in the event

of a downward shift in future revenues or operating cash flows in relation to our current plans or in case of capital injections by, or equity transfers to, third parties at a value lower than the one underlying the carrying amount.

At December 31, 2016,2018, the value of intangible assets subject to amortization in our Consolidated Balance Sheet amounted to $195$212 million.

Property,plantandequipment. Our business requires substantial investments in technologically advanced manufacturing facilities, which may become significantly underutilized or obsolete as a result of rapid changes in demand and ongoing technological evolution. We estimate the useful life for the majority of our manufacturing equipment, the largest component of our long-lived assets, to be six years, except for our 300 mm manufacturing equipment whose useful life is estimated to be ten years. This estimate is based on our experience using the equipment over time. Depreciation expense is a majoran important element of our manufacturing cost structure. We begin to depreciate newly acquired equipment when it is placed into service.

We evaluate each reporting period if there is reason to suspect impairment on tangible assets or in groups of assets held for use and we perform an impairment review when there is reason to suspect that the carrying value of these long-lived assets might not be recoverable, particularly in case of a restructuring plan. If we identify events or changes in circumstances which are indicative that the carrying amount is not recoverable, we assess whether the carrying value exceeds the undiscounted cash flows associated with the tangible assets or group of assets. If exceeded, we then evaluate whether an impairment charge is required by determining if the asset’s carrying value also exceeds its fair value. We normally estimate this fair value based on independent market appraisals or the sum of discounted future cash flows, using market assumptions such as the utilization of our fabrication facilities and the ability to upgrade such facilities, change in the selling price and the adoption of new technologies. We also evaluate and adjust, if appropriate, the assets’ useful lives at each reporting date or when impairment indicators are identified. Assets classified as held for sale are reported as current assets in the Consolidated Balance Sheets at the lower of their carrying amount and fair value less costs to sell and are no longer depreciated. In 2016, 20152018, 2017 and 2014,2016, no impairment charge was recorded on property, plant and equipment. The impairment on the assets held for sale was nil for the years ended December 31, 2018 and 2017 and amounted to $3 million for the year ended December 31, 2016 and was nil in the years ended December 31, 2015 and 2014.2016.

Our evaluations are based on financial plans updated with the latest projections of growth in the semiconductor market and our sales expectations, from which we derive the future production needs and loading of our manufacturing facilities, and which are consistent with the plans and estimates that we use to manage our business. These plans are highly variable due to the high volatility of the semiconductor business and therefore are subject to continuous modifications. If future growth differs from the estimates used in our plans, in terms of both market growth and production allocation to our manufacturing plants, this could require a further review of the carrying amount of our tangible assets and result in a potential impairment loss.

Inventory. Inventory is stated at the lower of cost or marketnet realizable value. Cost is based on the weighted average cost by adjusting the standard cost to approximate actual manufacturing costs on a quarterly basis; therefore, the cost is dependent on our manufacturing performance. In the case of underutilization of our manufacturing facilities, we estimate the costs associated with the unused capacity. These costs are not included in the valuation of inventory but are charged directly to cost of sales in the Consolidated Statements of Income. MarketNet realizable value is the estimated selling price in the ordinary course of business, less applicable variable selling expensesreasonably predictable costs of completion, disposal and cost of completion.transportation.

We perform, on a continuous basis, inventory write-offs of products, which have the characteristics of slow-moving, old production dates and technical obsolescence. The valuation of inventory requires us to estimate a reserve for obsolete or slow-selling inventory as well as inventory that is not of saleable quality. Reserve for obsolescence is estimated for excess uncommitted inventories based on the previous quarters’ sales, order backlog and production plans. To the extent that future negative market conditions generate order backlog cancellations and declining sales, or if future conditions are less favorable than the projected revenue assumptions, we could record additional inventory reserve, which would have a negative impact on our gross margin.

Restructuringcharges. We have undertaken, and we may continue to undertake, significant restructuring initiatives, which have required us, or may require us in the future, to develop formalized plans for exiting any of our existing activities. We recognize the fair value of a liability for costs associated with exiting an activity when we have a present obligation and the amount can be reasonably estimated. Given the significance and timing of

the execution of our restructuring activities, the process is complex and involves periodic reviews of estimates made at the time the original decisions were taken. This process can require a significant amount of time due to requisite governmental and customer approvals and our capability to transfer technology andknow-how to other locations. As we operate in a highly cyclical industry, we monitor and evaluate business conditions on a regular basis. If broader or newer initiatives, which could include production curtailment or closure of other manufacturing facilities, were to be taken, we may incur additional charges as well as change estimates of the amounts previously recorded. The potential impact of these changes could be material and could have a material adverse effect on our results of operations or financial condition. In 2016,2018 the restructuring charges and other related closure costs amounted to $85$19 million before taxes, mainly in connection with ourset-top box restructuring plan. In 20152017 and 2014,2016, the restructuring charges and other related closure costs amounted to $49$45 million and $66$85 million before taxes, respectively.

Share-basedcompensation. We measure the cost of share-based service awards based on the fair value of the awards as of the grant date reflecting the market price of the underlying shares at the date of the grant, reduced by the present value of the dividends expected to be paid on the shares during the requisite service

period. Our share-based service awards are granted to senior executives and selected employees. While the awards granted to selected employees are subject to a three-year service period, the awards granted to the senior executives are subject to both a three-year service period and the fulfillment of certain performance conditions, including our financial results when compared to industry performance. The expense is recognized over the requisite service period. In 2016,2018, approximatelyone-half of the total amount of shares awarded were granted to senior executives and consequently were contingent on the achievement of performance conditions. In order to determine share-based compensation to be recorded for the period, we use significant estimates on the number of awards expected to vest, including the probability of achieving the fixed performance conditions including those relating to industry performance compared to our financial results, and our best estimates of award forfeitures and employees’ service periods. Our assumptions related to industry performance are generally taken with a one quarter lag in line with the availability of market information. In 2016, 20152018, 2017 and 2014,2016, we recorded a total charge of approximately $38$125 million, $38$61 million and $36$38 million relating to our outstanding stock award plans, respectively.

Income (loss)onEquity-methodInvestments. We record our share in the results of entities that we account for under the equity method. This recognition is based on results reported by these entities, relying on their internal reporting systems to measure financial results. In case of triggering events, such as continuing difficult market conditions, which could lead to continued operating losses and negative cash flows, or in the case of a strategic repositioning by one or more of our partners, we determine whether our investment is temporarily or other-than-temporarily impaired. If impairment is considered to be other-than-temporary, we need to assess the fair value of our investment and record an impairment charge directly in earnings when fair value is lower than the carrying value of the investment. We make this assessment by evaluating the business on the basis of the most recent plans and projections or to the best of our estimates. In 2016,2018, we recognized an income of $7$8 million related to our equity investments, compared to an incomea loss of $2 million and income of $7 million for the yearyears ended December 31, 2015. For the year ended December 31, 2014, we reported a loss of $43 million for the equity-method investments.2017 and 2016, respectively. We monitor our equity investments on an ongoing basis and, if required, other-than-temporary impairment charges could negatively impact our future results. As of December 31, 2016,2018, the value in our Consolidated Balance Sheets of our equity investments was $45$49 million, reported in the line “Long-term investments”.

Financialassets. We classify our financial assets in the following two categories, trading andavailable-for-sale. SuchThe classification depends on the nature of the instruments and the purpose for which the financial assets arewere acquired. We determine the classification of our financial assets at initial recognition. Unlisted equity securities with no readily determinable fair value are carried at cost; they are neither classified as trading nor asavailable-for-sale financial assets.

TradingPurchases andavailable-for-sale sales of financial assets are recognized on the trade date — the date on which we commit to purchase or sell the asset. Equity securities measured at fair value through earnings and debt securities classified asavailable-for-sale are initially recognized and subsequently carried at fair value. Financial assets are derecognized when the rights to receive cash flows from the investments have expired or have been transferred and we have transferred substantially all risks and rewards of ownership; the relevant gain (loss) is reported as anon-operating element on the consolidated statements of income on the line “Gain (loss) on financial instruments, net”. The basis on which the cost of a security sold and the amount reclassified out of accumulated other comprehensive income into earnings are determined is the specific identification method.

The fair valuevalues of quoted debt and equity securities isare based on current market prices. If the market for a financial asset is not active and if no observable market price is obtainable, we measure fair value by using assumptions and estimates. In measuring fair value, we make maximum use of market inputs and minimize the use of unobservable inputs.

As of December 31, 2016,2018, the value in our Consolidated Balance Sheet of our financial assets was $335included $330 million of marketable securities invested in U.S. Treasury Bondsdebt securities classified as assetsavailable-for-sale.

Incometaxes. We make estimates and judgments in determining income tax for the period, comprising current and deferred income tax. We need to assess the income tax expected to be paid or the tax benefit expected to be received related to the current year taxable profit and loss in each individual tax jurisdiction and recognize

deferred income tax for all temporary differences arising between the tax bases of assets and liabilities and their carrying amount in the Consolidated Financial Statements. Furthermore, we assess all material open income tax positions in all tax jurisdictions to determine any uncertain tax positions, and to record a provision for those that are not more likely than not to be sustained upon examination by the taxing authorities, which could require potential tax claims or assessments in various jurisdictions. In such an event and in case any tax assessment exceeds our provisions, we could be required to record additional charges in our accounts, which could significantly exceed our best estimates and our existing provisions. As of December 31, 2016,2018, we had $238$25 million of estimated liabilities on uncertain tax positions.

We also assess the likelihood of realization of our deferred tax assets originated by our net operating loss carry forwards. The ultimate realization of deferred tax assets is dependent upon, among other things, our ability to generate future taxable profit available against loss carry forwards or tax credits before their expiration or our ability to implement prudent and feasible tax planningoptimization strategies or the possibility to settle uncertain tax positions against available net operating loss carry forwards or similar tax losses and credits. We record a valuation allowance against the deferred tax assets when we consider it is more likely than not that the deferred tax assets will not be realized.

As of December 31, 2016,2018, we had current deferred tax assets of $95 million andnon-current deferred tax assets of $437$672 million, net of valuation allowances.

We could be required to record further valuation allowances thereby reducing the amount of total deferred tax assets, resulting in an increase of our income tax charge, if our estimates of projected future taxable income and benefits from available tax strategies are reduced as a result of a change in business conditions or in management’s plans or due to other factors, or if changes in current tax regulations are enacted that impose restrictions on the timing or extent of our ability to utilize net operating losses and tax credit carry-forwards in the future. Likewise, a change in the tax rates applicable in the various jurisdictions or unfavorable outcomes of any ongoing tax audits could have a material impact on our future tax provisions in the periods in which these changes could occur.

PensionandPost-EmploymentBenefits. Our Consolidated Statements of Income and our Consolidated Balance Sheets include amounts for pension obligations and post-employment benefits that are measured using actuarial valuations. At December 31, 2016,2018, our pension and post-employment benefit obligations net of plan assets amounted to $347$384 million. These valuations are based on key assumptions, including discount rates, expected long-term rates of return on funds, turnover rates and salary increase rates. These assumptions used in the determination of the net periodic benefit cost are updated on an annual basis at the beginning of each fiscal year or more frequently upon the occurrence of significant events. Any changes in the pension schemes or in the above assumptions can have an impact on our valuations. The measurement date we use for our plans is December 31.

As a consequence of our decision to downsize our United Kingdom (“UK”) operations in 2014, we have proposed that the UK pension schemes (the Bristol Scheme and the Marlow Scheme) be merged, which will generate moderate funding savings and provide the Trustees with additional security. The merger of the two schemes is still under discussion with the Trustees and is not expected to materially change our pension liabilities.

PatentandotherIntellectualProperty (“IP”)litigationorclaims. We record a provision when we believe that it is probable that a liability has been incurred at the date of the Consolidated Financial Statements and the amount of the loss can be reasonably estimated. We regularly evaluate losses and claims to determine whether they need to be adjusted based on current information available to us. Such estimates are difficult to the extent that they are largely dependent on the status of ongoing litigation that may vary based on positions taken by the court with respect to issues submitted, demands of opposing parties, changing laws, discovery of new facts or other matters of fact or law. As of December 31, 2016,2018, based on our current evaluation of ongoing litigation and claims we face, we have not estimated any amounts that could have a material impact on our results of operations and financial condition with respect to either probable or possible risks. In the event of litigation that is adversely determined with respect to our interests, or in the event that we need to change our evaluation of a potential third-party claim based on new evidence, facts or communications, unexpected rulings or changes in the law, this could have a material adverse effect on our results of operations or financial condition at the time it were to materialize. We are in discussion with several parties with respect to claims against us relating to possible infringement of IP rights. We are also involved in certain legal proceedings concerning such issues. See “Item 8. Financial Information — Legal Proceedings” and Note 2324 to our Consolidated Financial Statements.

Otherclaims. We are subject to the possibility of loss contingencies arising in the ordinary course of business. These include, but are not limited to: warranty costs on our products not covered by insurance, breach of contract claims, tax claims beyond assessed uncertain tax positions as well as claims for environmental damages. We are also exposed to numerous legal risks which until now have not resulted in legal disputes and proceedings. These include risks related to product recalls, environment, anti-trust, anti-corruption and competition as well as other compliance regulations. We may also face claims in the event of breaches of law committed by individual employees or third parties. In determining loss contingencies, we consider the likelihood of a loss of an asset or the occurrence of a liability, as well as our ability to reasonably estimate the amount of such loss or liability. An estimated loss is recorded when we believe that it is probable that a liability has been incurred and the amount of the loss can be reasonably estimated. We regularlyre-evaluate any losses and claims and determine whether our provisions need to be adjusted based on the current information available to us. As of December 31, 2016,2018, based on our current evaluation of ongoing litigation and claims we face, we have not estimated any amounts that could have a material impact on our results of operations and financial condition with respect to either probable or possible risks. In the event we are unable to accurately estimate the

amount of such loss in a correct and timely manner, this could have a material adverse effect on our results of operations or financial condition at the time such loss was to materialize. For further details of our legal proceedings refer to “Item 8. Financial Information — Legal Proceedings” and Note 2324 to our Consolidated Financial Statements.

Fiscal Year 20162018

Under Article 35 of our Articles of Association, our financial year extends from January 1 to December 31, which is the period end of each fiscal year. In 2016,2018, the first quarter ended on April 2,March 31, the second quarter ended on July 2,June 30, the third quarter ended on October 1September 29 and the fourth quarter ended on December 31. In 2017,2019, the first quarter will end on April 1,March 30, the second quarter will end on July 1,June 29, the third quarter will end on September 3028 and the fourth quarter will end on December 31. Based on our fiscal calendar, the distribution of our revenues and expenses by quarter may be unbalanced due to a different number of days in the various quarters of the fiscal year and can also differ from equivalent prior years’ periods, as illustrated in the below table for the years 2015, 20162017, 2018 and 2017.2019.

20162018 Business Overview

Our results of operations for each period were as follows:

The total available market is defined as the “TAM”, while the serviceable available market, the “SAM”, is defined as the market for products sold by us (which consists of the TAM and excludes major devices such as Microprocessors (MPUs)(“MPUs”), Dynamic random-access memories (DRAMs)(“DRAMs”), optoelectronics devices, Flash Memories and the Wireless Application Specific market products such as Baseband and Application Processor).

Based on industry data published by WSTS, semiconductor industry revenues in 20162018 increased on a year-over-year basis by approximately 1%14% and approximately 4%10% for the TAM and the SAM, to reach approximately $339$469 billion and $156$194 billion, respectively. In the fourth quarter of 2016,2018, both the TAM and the SAM increased on a year-over-year basis by approximately 12%.1% and 6%, respectively. Sequentially, in the fourth quarter of 2016,2018, the TAM and the SAM increaseddecreased by approximately 5%8% and 1%3%, respectively.

In 2016,During 2018, in line with our revenues grew 1.1% compared to 2015. After a weak start to the year, reflecting both market and specific product transitions, revenues grew 6.5% in the second half of 2016 compared to the same period in the prior year. Importantly, by leveraging our strategic focus on Smart Driving and Internet of Things,objectives, we recorded year-over-year salesdelivered significant revenue growth in the second half of 2016 across all of our product groups excluding discontinued businesses. Throughout 2016 we also further strengthened our technology and product portfolio, accelerating innovation andtime-to-market to reinforce our leadership. Overall, we have improved ourstrong expansion of operating profitability, throughnet income and free cash flow, while investing to increase growth opportunities and operating efficiency over the combination of revenuemid-term.

Our 2018 net revenues increased by 15.8% year-over-year, with a double-digit growth in all product groups and geographies. Our gross margin expansionexpanded 80 basis points; operating margin increased 250 basis points to 14.5% and operating expense control.net income improved by $485 million to $1,287 million.

In the fourth quarter, we continued to see sustained demand, resulting innet revenues andwere up 7.4% year-over-year, gross margin exceedingreached 40.0%, and operating margin was 16.8%. On a sequential basis, fourth quarter revenues grew by 5.0%, 70 basis points below the midpointmid-point of our guidance. Net revenues grew 3.5% sequentially and 11.5% year-over-year; our gross margin of 37.5% increased substantially both sequentially and year-over-year. Compared to the served market, ourOur quarterly performance was above the SAM both sequentially and slightly below on a year-over-year basis.

Our effective average exchange rate was $1.18 for €1.00 for the full year 2018, as compared to $1.11 for €1.00 for the full year 2016, compared to $1.17 for €1.00 for the full year 2015.2017. Our effective average exchange rate for the fourth quarter of 20162018 was $1.10$1.17 for €1.00, compared to $1.12$1.18 for €1.00 for the third quarter of 20162018 and $1.11$1.15 for €1.00 in the fourth quarter of 2015.2017. For a more detailed discussion of our hedging arrangements and the impact of fluctuations in exchange rates, see “Impact of Changes in Exchange Rates”.

Our 20162018 gross margin improved 14080 basis points to 35.2%40.0% from 33.8%39.2% in 20152017 mainly benefiting from manufacturing efficiencies favorable currency effects, net of hedging, lower unused capacity charges and improvedbetter product mix, partially offset by normal price pressure.pressure and unfavorable currency effects, net of hedging.

Our fourth quarter 20162018 gross margin was 37.5%40.0%, 5020 basis points above the midpoint of our guidance, and included aboutimproving sequentially by 20 basis points of unused capacity charges. Grosspoints. Our gross margin increased 170 basis points sequentially and 400decreased 70 basis points year-over-year, in both cases onnegatively impacted by sale price pressure and unfavorable currency effect, net of hedging, partially offset by better product mix and improved manufacturing efficiencies, lower unused capacity charges and improved product mix partially offset principally by normal price pressure.efficiency.

Our operating expenses, comprised of SG&A and R&D expenses, amounted to $2,247$2,493 million in 2016, decreasing2018, increasing by about 3%9.5% from $2,322 million in the prior year, mainly reflecting lower R&D costs due to favorable currency effects, net of hedging, the benefits of theset-top box restructuring plan, and the savings plan completed in 2015. Our fourth quarter 2016 operating expenses experienced a sequential increase of about 5% mainly due to seasonality and increased level of R&D activity. On a year-over-year basis, our fourth quarter operating expenses decreased by approximately 2% mostly due to favorable currency effects, net of hedging, lower calendar days in the quarter and the cost reduction resulting from our savings plans.

Other income and expenses, net, in 2016 decreased to $99 million from $164$2,277 million in the prior year, mainly due to unfavorable currency effects, net of hedging, salary dynamic, management reorganization charges and higher costs of the share based compensation plans. Combined R&D and SG&A expenses were $630 million for the fourth quarter of 2018, compared to $616 million and $590 million in the prior andyear-ago quarters, respectively. The sequential increase was mainly due to seasonality and higher share-based compensation cost. The year-over-year increase was due to higher share-based compensation cost, salary dynamic and increased spending on certain R&D programs.

Other income and expenses, net, was $53 million in 2018 compared to $55 million in 2017, mainly due to a lower level of R&D grantsgrants. Fourth quarter other income and a reduced gain from sale ofnon-strategic assets.

Impairment and restructuring charges were $93 million in 2016 compared to $65 million in 2015 and principally related to theset-top box restructuring plan. Impairment and restructuring charges in the fourth quarter were $24expenses, net, was $16 million compared to $29$11 million in the prior quarter bothand $18 million in theyear-ago quarter.

In 2018, impairment and restructuring charges were $21 million compared to $45 million in 2017, mostly related to theset-top box restructuring plan announced in January 2016. We continued2016, now substantially completed in all locations. Impairment and restructuring charges in the fourth quarter were $2 million, mainly related to make progress onimpairment of acquired technologies, for which it was determined that they had no future alternative use, compared to nil and $20 million in the restructuring ofprior andyear-ago quarters, respectively, mainly related to theset-top box business. Exiting 2016, the restructuring plan, was on track and achieved about $110 million of the total $170 million of targeted annualized savings expected upon completion.now substantially completed in all locations.

Operating income increased substantially in 20162018 was $1,400 million, improving by $395 million compared to $214 million from $109 million in 2015, mainly due to2017 on higher revenues and improved gross profit.margin. Similarly, full year 2018 operating income before impairment and restructuring charges alsoanon-U.S. GAAP measure, increased sharply to $307$1,421 million, equivalent to 14.7% of net revenues, compared to $1,050 million, equivalent to 12.6% of net revenues in 2017, on higher revenues, gross margin expansion and improved operating leverage. Operating income in the fourth quarter grew on a sequential and year-over-year basis to $443 million compared to $174 million in 2015, reflecting favorable currency effects, net of hedging, manufacturing efficiencies, improved product mix, and lower operating expenses, partially offset mainly by price pressure and lower R&D grants. Fourth quarter operating income was $129 million compared to $90$398 million and $25$411 million in the prior quarter andyear-ago quarter,quarters, respectively. Fourth quarter operating income before impairment and restructuring charges, improvedanon-U.S. GAAP measure, increased sequentially by $47 million to $153$445 million, or 8.2%equivalent to 16.8% of net revenues, driven by a higher level of revenues from $119 million or 6.6%, mainly due to higher revenues and improved gross profit, partially offset by higher operating expenses.margin. On a year-over-year basis, operating income before impairment and restructuring charges, improvedanon-U.S. GAAP measure, increased by $124$14 million mainly due toreflecting higher revenues, improved product mix, manufacturing efficiencies and fab loading, as well asproduct mix. Operating income before impairment and restructuring charges is anon-U.S. GAAP measure. Refer to “Results of operations” for the cost reduction resulting fromreconciliation of both the operating income before impairment and restructuring charges, anon-US GAAP measure, to our savings plans.consolidated statements of income.

Full year 20162018 net income increased 58% to $165was $1,287 million, equivalent to $0.19or $1.41 diluted earnings per share, compared to net income of $104$802 million, or $0.12$0.89 diluted earnings per share for the full year 2015.2017. Fourth quarter net income increased significantly both on a sequential and year-over-year basis to $418 million, or $0.46 diluted earnings per share, compared to net income of $369 million, or $0.41 diluted earnings per share, in the prior quarter and net income of $308 million, or $0.34 diluted earnings per share, in theyear-ago quarter.

Capital expenditure payments, net of proceeds from sales, followed well our anticipated route to support revenue growth and were $228$279 million and $607 million$1.26 billion during the fourth quarter and full year of 2016,2018, respectively. Full year 20152017 capital expenditures, net of proceeds from sales, were $467 million. Combined capital expenditures for the years 2015-2016 were 7.7% as a percentage of combined net revenues.$1.30 billion.

During 2016,2018, our net cash decreasedincreased by $142$507 million, with net cash from operating activities reaching $1,039 million.$1.85 billion. During 2016,2018, we paid cash dividends to shareholders totaling $251$216 million and used $191$103 million of cash for long-term debt repayment.repayment and $62 million for the repurchase of common stock.

Our free cash flow, anon-USnon-U.S. GAAP measure, amounted to $312$533 million (or $390 million before the NFC and RFID reader assets acquisition of $78 million)in 2018 compared to $327$308 million in 2015.2017. Refer to “Liquidity and Capital Resources” for the reconciliation of the free cash flow, anon-USnon-U.S. GAAP measure, to our cash flow statement.

Business Outlook

Based on market forecasts, a positive booking trend,Our first quarter 2019 outlook reflects the combined impact of increased unfavorable dynamics, in addition to first quarter seasonality, in some of the end markets we serve: smartphone applications; computer hard-disk drives; distribution in China and a strongpoint-of-sales performance at our distributors,also in Europe. Still, we see Automotive and Power Discrete performing well, with revenues growth expected on year over year basis.

Our first quarter outlook reflects revenues of approximately $2.1 billion at themid-point, decreasing year-over-year by about 5.7%. Sequentially, this represents a decrease of approximately 20.7% (plus or minus 350 basis points), reflecting the momentumcombined impact of increased unfavorable dynamics in some of the second half of 2016end markets we serve, in additional to continue entering 2017. We expect ournormal first quarter to reflect better than normal seasonality, withseasonality. From a sequential net revenues decline of about 2.4%, plus or minus 3.5 percentage points. On a year-over year basis, this would translate into a net revenues growth of about 12.5% at themid-point. Weprofitability perspective, we expect a gross margin of about 37.0%approximately 39%, plus or minus 2.0 percentage200 basis points.

Our key objectives in 2019 are to continue outperforming our served market and to balance our end market and application focus, delivering sustainable profitability and returning value to shareholders. To support all of that and to execute on our strategic technology, R&D and manufacturing programs, we expect our investment in capex to be in the range of $1.2 to $1.3 billion.

This outlook is based on an assumed effective currency exchange rate of approximately $1.08=$1.16 = €1.00 for the 20172019 first quarter and includes the impact of existing hedging contracts. The first quarter will close on April 1, 2017.March 30, 2019.

These are forward-looking statements that are subject to known and unknown risks and uncertainties that could cause actual results to differ materially; in particular, refer to those known risks and uncertainties described in “Cautionary Note Regarding Forward-Looking Statements” and “Item 3. Key Information — Risk Factors” herein.

Other Developments

In October 2016On February 7, 2019 we extendedannounced the acquisition of a majority stake in Swedish SiC wafer manufacturer Norstel AB (“Norstel”). ST will acquire 55% of Norstel’s share capital, with an option to acquire the remaining 45% subject to certain conditions, which, if exercised, will result in total consideration of $137.5 million, funded with available cash. After closing, ST will control the entire supply chain for anothera portion of its SiC devices at a time of constrained global capacity and positions itself for a significant growth opportunity. Norstel, headquartered in Norrkoping, Sweden, develops and manufactures advanced 150 mm SiC bare and epitaxial wafers.

On January 7, 2019 Cree, Inc. and ST announced signing a multi-year agreement in which Cree will produce and supply SiC wafers to STMicroelectronics. The agreement governs the supply of Cree’s 150 mm SiC bare and epitaxial wafers to ST.

On November 5, 2018 we announced the launch of a share10-yearbuy-back periodprogram of up to $750 million to be executed within a3-year period.

On September 24, 2018 we announced that we entered the existing option agreement with Stichting Continuiteït ST, an independent Dutch foundation. For more information on the option agreement see “Item 7. Major ShareholdersDow Jones World and Related Party Transactions — Preference Shares.”Europe Sustainability Indices.

On August 23, 201622, 2018 we published our IFRS 20162018 Semi Annual Accounts for thesix-month period ended July 2, 2016June 30, 2018 on our website and we filed themour IFRS 2018 Semi Annual Accounts with the AFM (Autoriteit(Autoriteit Financiële Markten)Markten), the Netherlands Authority for the Financial Markets.Markets (“AFM”).

On July 29, 2016,10, 2018 we acquired ams’ (SIX: AMS) assets relatedannounced the acquisition of software specialist Draupner Graphics. Draupner Graphics is the developer and supplier of TouchGFX, a software framework offering outstanding graphics and

smooth animations for embedded graphical user interfaces with minimal resource requirements and power consumption. Hosted on32-bit microcontrollers, TouchGFX enableshigh-end graphics that fully live up to Near-Field Communication (NFC)today’s smartphone standards across all devices and Radio-Frequency Identification (RFID) Reader business. We acquired intellectual property, technologies, productssystems, including smart home and business highly complementary to our secure microcontroller solutions serving mobile devices,building automation systems, appliances, wearables, banking, identification, industrial, automotive and IoT markets. The ams’ assets were acquired in exchange for a (i) cash payment of $77.8 million (funded with available cash),audio and (ii) deferredearn-out contingent on future results, which we currently estimate at about $12 million but which in any case will not exceed $37 million.video systems.

On May 26, 201631, 2018 we announced the publication of our 2015 Sustainability Report.

On May 25, 2016that all of the proposed resolutions were adopted at ourthe Company’s Annual General Meeting of Shareholders (“AGM”), which was held in Amsterdam.Amsterdam, the Netherlands. The main resolutions approved by the shareholders, were:

On May 21, 2018 we announced the publication of our 2018 Sustainability Report.

On March 27, 2018 we announced the main resolutions to be submitted for adoption at our AGM held in Amsterdam, the Netherlands, on May 31, 2018.

On February 5, 2018 we were recognized as among the world’s most innovative companies and we were named a “2018 Thomson Reuters Top 100 Global Technology Leader”.

On January 25, 2018 we announced Carlo Bozotti’s Succession Plan according to which the deputy CEO Jean-Marc Chery was proposed as the Sole Member of the Managing Board at the 2018 AGM following which he became the next President and Chief Executive Officer. The Succession Plan envisaged the establishment of Executive Committee effective upon the shareholder approval of Mr. Chery’s appointment. In addition, Carlo Ferro, Chief Financial Officer and President Finance, Legal, Infrastructure and Services, informed the Company about his intention to step down from his position at the same time as the President and Chief Executive Officer Carlo Bozotti’s retirement effective at the conclusion of the AGM’s meeting. According to the announced Succession Plan Mr. Ferro remained President of our Italian affiliate until the end of 2018.

Results of Operations

Segment Information

We operate in two business areas: Semiconductors and Subsystems.

In the Semiconductors business area, we design, develop, manufacture and market a broad range of products, including discrete and standard commodity components, application-specific integrated circuits,full-custom devices and semi-custom devices and application-specific standard products for analog, digital and mixed-signal applications. In addition, we further participate in the manufacturing value chain of Smartcard products, which includeincludes the production and sale of both silicon chips and Smartcards.

During the first quarter of 2016, our internal organization changed to align with our strategic focus on Smart Driving and on Internet of Things applications. Comparative numbers were restated accordingly.

Our reportable segments are as follows:

•

MicrocontrollersandDigitalICsGroup(MDG), comprised of general purpose and secure microcontrollers, EEPROM memories, Digital ASICs, Aerospace and digital ASICs as well as restructured businesses such asset-top box ICs or formerST-Ericsson products.Defense products including components for microwave and millimeter wave.

“Others” includes all the financial values related to the Imaging Product Division (including the sensors and modules from our Time of Flight technology), Subsystems and other products, as well as items not allocated to the segments such as impairment, restructuring charges and other related closure costs, unused capacity charges, strategic or special research and development programs and other minor unallocated expenses such as: certain corporate-level operating expenses, patent claims and litigation, and other costs that are not allocated to the segments.

InEffective January 1, 2018, the Subsystems business area, we design, develop, manufacture and market subsystems and modules for the telecommunications, automotive and industrial markets including mobile phone accessories, battery chargers, ISDN power supplies andin-vehicle equipment for electronic toll payment. Based on its immaterialityunit was transferred from Others to our business as a whole, the Subsystems business area does not meet the requirements for a reportable segment as defined in the U.S. GAAP guidance.AMS. Prior periods have been restated accordingly.

For the computation of the segments’ internal financial measurements, we use certain internal rules of allocation for the costs not directly chargeable to the segments, including cost of sales, selling, general and administrative expenses and a part of research and development expenses. In compliance with our internal policies, certain costs are not allocated to the segments, includingbut reported in “Others” and include impairment, restructuring charges and other related closure costs, management reorganization expenses, unused capacity charges,phase-out andstart-up costs of certain manufacturing facilities, certainone-time corporate items, strategic and special research and development programs or other corporate-sponsored initiatives, including certain corporate-level operating expenses, patent claims and litigations and certain other miscellaneous charges. In addition, depreciation and amortization expense is part of the manufacturing costs allocated to the segments and is neither identified as part of the inventory variation nor as part of the unused capacity charges; therefore, it cannot be isolated in the costs of goods sold. Finally, R&D grants are allocated to our segments proportionally to the incurred R&D expenses on the sponsored projects.

Wafer costs are allocated to the segments based on actual cost. From time to time, with respect to specific technologies, wafer costs are allocated to segments based on market price.

Annual Results of Operations

The following table sets forth certain financial data from our Consolidated Statements of Income: