As filed with the Securities and Exchange Commission on January 14,February 3, 2022

Registration No. 333-333-262195

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

AMENDMENT NO. 3

TO

FORM S-1

REGISTRATION STATEMENT

UNDER

THE SECURITIES ACT OF 1933

Ra Medical Systems, Inc.

(Exact name of registrant as specified in its charter)

2070 Las Palmas Drive

Carlsbad, CA 92011

760-804-1648

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

Jonathan Will McGuire

2070 Las Palmas Drive

Carlsbad, CA 92011

760-804-1648

(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

Approximate date of commencement of proposed sale to the public: public: As soon as practicable after this registration statement becomes effective.

If any of the securities being registered on this form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box.  ☒

If this form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period with any new or revised accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act.  ☐

CALCULATION OF REGISTRATION FEE

(3)  No separate fee is required pursuant to Rule 457(g) under the Securities Act.

The registrant hereby amends this registration statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this registration statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, as amended, or until the registration statement shall become effective on such date as the Securities and Exchange Commission acting pursuant to such Section 8(a) may determine.

The information in this preliminary prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell these securities, and we are not soliciting an offer to buy these securities in any state where the offer or sale is not permitted.

Subject to completion, dated January 14,February 3, 2022

PRELIMINARY PROSPECTUS

Ra Medical Systems, Inc.

Up to13,043,478 Units, Each Unit Consisting of One Share of Common Stock, and One Warrant to Purchase One Share of Common Stock

Up to                  Pre-funded Units, Each Pre-funded Unit Consisting of One Pre-fundedSeries A Warrant to Purchase One Share of Common Stock and One Series B Warrant to Purchase One Share of Common Stock

13,043,478 Pre-funded Units, Each Pre-funded Unit Consisting of One Pre-funded Warrant to Purchase One Share of Common Stock, One Series A Warrant to Purchase One Share of Common Stock and One Series B Warrant to Purchase One Share of Common Stock

This preliminary prospectus (“prospectus”) relates to the offering of 13,043,478 units of Ra Medical Systems, Inc., a Delaware corporation (the “Units”) at an assumed public offering price of $$0.92 per Unit, the last reported sales price of our common stock on the NYSE American on January     ,February 1, 2022. Each unitUnit consists of one (1) share of our common stock, one (1) warrant to purchase one share of our common stock at an exercise price of $             per share (or       % of the price of each Unit sold in the offering) which will be immediately exercisable and will expire on the one (1) year anniversary of the original issuance date, or a Series A Warrant, and one (1) warrant to purchase one share of our common stock at an exercise price of $         per share (or      % of the price of each Unit sold in the offering) which will be immediately exercisable and will expire on the five (5)seven (7) year anniversary of the original issuance date.date, or a Series B Warrant. Series A Warrants and Series B Warrants may be exercised only for a whole number of shares. No fractional shares will be issued upon exercise of the warrants.Series A Warrants or Series B Warrants. The Units will not be certificated. The shares of common stock, the Series A Warrants and the warrantsSeries B Warrants are immediately separable and will be issued separately in this offering.

We are also offering to those purchasers, if any, whose purchase of units in this offering would otherwise result in such purchaser, together with its affiliates and certain related parties, beneficially owning more than 4.99% (or, at the election of the purchaser, 9.99%) of our outstanding shares of common stock immediately following the consummation of this offering, the opportunity to purchase, if any such purchaser so chooses, pre-funded units (each pre-funded unit consisting of one pre-funded warrant to purchase one share of common stock, one Series A Warrant and one warrant to purchase one share of common stock),Series B Warrant, in lieu of units that would otherwise result in such purchaser’s beneficial ownership exceeding 4.99% (or, at the election of the purchaser, 9.99%) of our outstanding shares of common stock. The purchase price of each pre-funded unit will be equal to the price per unit being sold to the public in this offering, minus $0.0001, and the exercise price of each pre-funded warrant included in the pre-funded units will be $0.0001 per share. The pre-funded warrants included in the pre-funded units will be certificated and will be immediately exercisable and may be exercised at any time until allfor a period of 20 years following the pre-funded warrants are exercised in full.date of issuance.

For each pre-funded unit we sell, the number of units we are offering will be decreased on a one-for-one basis. The units and the pre-funded units will not be issued or certificated. The shares of common stock or pre-funded warrants, as the case may be, and the warrantsSeries A Warrants and Series B Warrants included in the units or the pre-funded units can only be purchased together in this offering, but the securities contained in the units or pre-funded units will be immediately separable upon issuance and will be issued separately. The shares of common stock issuable from time to time upon exercise of the warrantsSeries A Warrants, the Series B Warrants and the pre-funded warrants are also being offered by this prospectus.

Our common stock is quoted for tradinglisted on the NYSE American under the symbol “RMED.” As of January    ,February 1, 2022, the last reported sales price for our common stock as quoted on the NYSE American was $$0.92 per share. There is no established trading market for the warrantsSeries A Warrants, the Series B Warrants or pre-funded warrants being offered, and we do not expect a market to develop. In addition, we do not intend to apply for the listing of the Series A Warrants, the Series B Warrants or the pre-funded warrants on any national securities exchange or other trading market. Without an active trading market, the liquidity of the warrantsSeries A Warrants, the Series B Warrants and pre-funded warrants will be limited.

An investment in our common stock, Series A Warrants, Series B Warrants and pre-funded warrants involves a high degree of risk. Before buying any shares, Series A Warrants, Series B Warrants and/or pre-funded warrants, you should carefully read the discussion of the material risks of investing in our common stock and warrants in “Risk Factors”“Risk Factors” beginning on page 1011 of this prospectus.

__________________________

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

The offering is being underwritten on a firm commitment basis. We have granted a 45-day option to the underwriter to purchase up to an additional ____________1,956,522 shares of common stock, Series A Warrants and/or warrantsSeries B Warrants to purchase an additional 1,956,522 shares of common stock from us at the public offering price, less the underwriting discounts payable by us, to cover over-allotments, if any.

The underwriters expect to deliver the shares of common stock and warrants to investors on or about                 ____________,, 2022.

Sole Book-Running Manager

Ladenburg Thalmann & Co. Inc.

The date of this prospectus is                 _________________,, 2022

TABLE OF CONTENTS

Neither we nor the underwriters have authorized anyone to provide you with any information or to make any representations other than that contained in this prospectus or in any free writing prospectus we may authorize to be delivered or made available to you. We take no responsibility for, and can provide no assurance as to the reliability of, any other information that others may give you. Neither we nor the underwriters are making an offer to sell securities in any jurisdiction in which the offer or sale is not permitted. The information in this prospectus is accurate only as of the date of this prospectus, regardless of the time of delivery of this prospectus or of any sale of our shares of common stock and the information in any free writing prospectus that we may provide to you in connection with this offering is accurate only as of the date of that free writing prospectus. Our business, financial condition, results of operations and prospects may have changed since those dates.

For investors outside the United States: We have not, and the underwriters have not, done anything that would permit this offering, or possession or distribution of this prospectus, in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about, and observe any restrictions relating to, the offering of the shares of common stock and the distribution of this prospectus outside of the United States.

Until                , 2022, all dealers that effect transactions in these securities, whether or not participating in this offering, may be required to deliver a prospectus. This is in addition to the dealers'dealers’ obligation to deliver a prospectus when acting as underwriters and with respect to their unsold allotments or subscriptions.

Unless the context clearly indicates otherwise, references in this prospectus to “we,” “our,” “ours,” “us,” “the Company” and “Ra Medical” refer to Ra Medical Systems, Inc.

-1-

-1-

-2-

-2-

-3-

-3-

-4-

-4-

-5-

-7-

-8-

-9-

-9-

RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this prospectus, before making an investment decision. The risks and uncertainties described below may not be the only ones we face. If any of the risks actually occur, our business, financial condition, operating results, cash flows and prospects could be materially and adversely affected. In that event, the market price of our common stock could decline, and you could lose part or all of your investment.

Risk Factor Summary

Risks Related to Our Business and Products

Risks Related to Government Regulation and our Industry

Risks Related to our Intellectual Property

Risks Related to Our Business and Products

We require additional capital to finance our operations, which may not be available to us on acceptable terms or at all.

Our current cash resources are not sufficient to fund operations at the expected level of activity beyond the second quarter of 2022. We will need additional capital to continue operations at the current level and to continue our atherectomy indication trial and engineering efforts.efforts.

Our operations have consumed substantial amounts of cash since inception, primarily due to our research and development and commercialization efforts. As of September 30, 2021, we had cash and cash equivalents of $20.6 million and an accumulated deficit of $170.0 million. For the nine months ended September 30, 2021 and the year ended December 31, 2020, we used cash of $21.9 million and $28.3 million, respectively, in operating activities from continuing and discontinued operations. We have experienced recurring net losses from operations, negative cash flows from operating activities, and a significant accumulated deficit and expect to continue to incur net losses into the foreseeable

-11-

future. As a result, our financial statements include explanatory disclosures expressing substantial doubt about our ability to continue as a going concern.

In the near term, we expect our recurring operational costs to decrease as a result of our cost savings initiatives. In the third quarter of 2019, we began implementing certain operational efficiency and cost savings initiatives intended to align our resources with our product strategy, reduce our operating expenses, and manage our cash flows. These cost efficiency initiatives included targeted workforce reductions of our sales and marketing teams. We have suspended sales of DABRA catheters not related to our atherectomy clinical trial. We submitted additional test data with respect to the DABRA catheter shelf life in March 2021, which was cleared by the FDA in July 2021. Further cost reductions may be required on an ongoing basis to optimize our organization. For example, we may need to decrease or defer capital expenditures and development activities or implement further operating expense reduction measures. Such measures may impair our ability to invest in developing, marketing and selling new and existing products. Until we are able to generate sufficient revenue to support our level of operating expenses, we will continue to incur operating and net losses and negative cash flow from operations. Additionally, we anticipate additional legal and other costs related to the securities class action and derivative lawsuits, as well as compliance with, and payments under, the terms of our Settlement Agreement and Corporate Integrity Agreement associated with our settlements with the DOJ and the participating states.states. Because of the numerous risks and uncertainties associated with our commercialization efforts and future product development and these lawsuits and ongoing government investigation, we are unable to predict when we will become profitable, and we may never become profitable. Even if we do achieve profitability, we may not be able to sustain or increase our profitability.

The amount and timing of any expenditures needed to implement our commercial strategy will depend on numerous factors, including:

business and have an effective shelf registration statement and “at the market”, or ATM, offering. statement. We may seek to raise capital through strategic transactions, such as a sale of one or more of our assets, a license to our technology, a business combination or other partnership transaction, and in connection with such transaction, we may be required to relinquish valuable rights that would dilute our current and future value. However, no assurance can be provided that we will be able to do so on commercially reasonable terms, or at all. We may incur significant costs in pursuing, evaluating and negotiating particular capital-raising and/or strategic or partnering transactions, even if our efforts prove unsuccessful. Our failure to raise capital or consummate any of these transactions as needed would have a material adverse effect on our financial condition and ability to pursue our business strategy and we may be unable to continue as a going concern and required to liquidate our assets and dissolve our company. To the extent that we are unable to be, and even to the extent we are, successful in consummating one or more of these transactions, we may need to curtail or cease our operations and implement a plan to extend payables or reduce overhead until sufficient additional capital is raised to support further operations. If we determine our financial resources are insufficient to fund our operations even after implementing additional cost saving measures and reducing the scope of our operations, we may be required to dispose of or liquidate our assets at values significantly less than what we believe their values to be and at which they are carried on our financial statements.

If our board of directors decides to dissolve our company and liquidate our assets, we would be required to pay all of our debts and contractual obligations, and to set aside certain reserves for potential future claims, and there can be no assurance as to the amount or timing of available cash left to distribute to our stockholders after paying our debts and other

-13-

obligations and setting aside funds for potential future claims. If we attempt to continue to operate our business, focusing on our atherectomy indication trial or potentially expanding the use of our technology to be used for lithotripsy, we would need to raise significant additional funds to fund our operations and execute on our business strategy and we may not be successful in those efforts.

We are highly dependent on our key personnel, and if we are not successful in attracting and retaining highly qualified personnel, we may not be able to successfully implement our business strategy.

Our ability to compete in the highly competitive medical devices industry depends upon our ability to attract and retain highly qualified managerial, scientific, sales and medical personnel. We are highly dependent on our senior management team. Will McGuire, our Chief Executive Officer, has been diagnosed with a serious non-Covid-19 related illness not caused by COVID-19 and has been undergoing treatment for his illness. He continues to fulfill all of his duties and responsibilities and has stated his desire to continue in such roles. We do not expect our Chief Executive Officer to relinquish any of his responsibilities or duties in the short term as a result of this diagnosis, however, his condition may change and prevent him from doing so. The Board is monitoring the situation and is evaluating its options in the event Mr. McGuire has to reduce or discontinue his roles. The loss of the services of any of our executive officers and other key employees, and our inability to find suitable replacements could result in delays in product development and harm our business.

We face intense competition for executive-level talent from a variety of sources, including from current and potential competitors in the medical device and healthcare industries. Our continued success is dependent, in part, upon our ability to attract and retain superior executive officers.

Competition for skilled personnel in our market is intense and may limit our ability to hire and retain highly qualified personnel on acceptable terms or at all. To induce valuable employees to remain at our company, in addition to salary and cash incentives, we have issued stock options and restricted stock units that vest over time. The value to employees of stock options and restricted stock units that vest over time may be significantly affected by movements in our stock price that are beyond our control and may at any time be insufficient to counteract more lucrative offers from other companies. The decline in our stock price may create additional challenges by reducing the retention value of our equity awards to these employees. Despite our efforts to retain valuable employees, members of our management, scientific and development teams may terminate their employment with us on short notice. Although we have employment agreements with our key employees, these

-15-

employment agreements provide for at-will employment, which means that any of our employees could leave our employment at any time, with or without notice. We do not maintain “key man”“key man” insurance policies on the lives of these individuals or the lives of any of our other employees. Our success also depends on our ability to continue to attract, retain and motivate highly skilled junior, mid-level and senior managers as well as junior, mid-level and senior scientific and medical personnel. If we are not successful in attracting and retaining highly qualified personnel, it would have a material adverse effect on our business, financial condition, and results of operations.

We may be unable to successfully remedy the performance, shelf life and calibration issues associated with our DABRA catheters, achieve market acceptance of DABRA, or achieve revenue growth.

Our ability to grow our revenue in future periods will depend on our ability to successfully remedy the inconsistencies in our DABRA catheter performance, penetrate our target markets and increase sales of our products and any new product indications that we introduce, which will, in turn, depend in part on our success in growing our installed unit base and driving continued use of our systems, including long-term adoption by physicians. During the fourth quarter of 2018 and into 2019, we saw an increase in calibration issues experienced by physicians. In addition, in reviewing the performance inconsistencies, we found that our catheters occasionally overheated, which could cause a risk of injury to patients and physicians. These higher than anticipated rates of non-calibration resulted in customer dissatisfaction with the product, resulting in what we believe to be fewer purchases by our customers. In the third quarter of 2019, we determined that catheters that were more than two months from sterilization had a significantly higher rate of non-calibration than catheters that were within two months of sterilization. AsAs a result, in September 2019, we initiated a voluntary recall of our catheters to replace 12-month shelf life labeled catheters with two-month shelf life labeled catheters with two-month. shelf life labeled catheters. Accordingly, we reduced the number of sales and marketing personnel in order to conserve cash and focus our efforts on key territories and accounts. We also initiated a voluntary recall of our DABRA catheters to replace 12-month shelf life labeled catheters with two-month shelf life labeled catheters and have paused commercial sales not related to our atherectomy clinical trial. These actions will likely make it more difficult in the near term to achieve significant revenue growth. In addition, new product

-14-

indications will also need to be approved or cleared by the FDA and comparable non-U.S. regulatory agencies to help drive revenue growth. If we cannot achieve revenue growth, it would have a material adverse effect on our business, financial condition, and results of operations.

Our success depends in large part on DABRA. If we are unable to successfully manufacture, market and sell DABRA, our business prospects will be significantly harmed.

Our future financial success will depend substantially on our ability to effectively and profitably manufacture, market and sell DABRA. The commercial success of DABRA will depend on a number of factors, including the following:

may deter some clinical sites from participating in our atherectomy study. study. Other limitations in our DABRA catheter performance, such as the potential for kinking during certain clinical scenarios or the lack of a guidewire-compatible version of our DABRA catheter, may limit the number of cases in which the DABRA catheter will be used during the trial. Laboratories may read or interpret clinical data differently than our clinical trial physicians’ initial assessment, which may lead to delays in the ultimate conclusion of our trial. Accordingly, we cannot predict whether or when we will be able to successfully complete our atherectomy indication trial. Any inability to complete our atherectomy indication trial could have an adverse impact on our ability to successfully manufacture, market and sell DABRA, which in turn could adversely impact our business, financial condition and results of operations.operations.

We are required to devote significant resources to complying with the terms and conditions of our Corporate Integrity Agreement and, if we fail to comply, we could be subject to penalties or, under certain circumstances, excluded from government healthcare programs, which would materially adversely affect our business.

On December 28, 2020, we entered into a five-year Corporate Integrity Agreement with the OIG. The Corporate Integrity Agreement requires that we maintain our existing compliance programs, as well as expanding compliance-related requirements during the term of the Corporate Integrity Agreement. The Corporate Integrity Agreement requires us to establish specific procedures and requirements regarding consulting activities, marketing activities and other interactions with healthcare professionals and healthcare institutions and the sale and marketing of our products; ongoing monitoring, reporting, certification and training obligations; and the engagement of an independent review organization to perform certain auditing and reviews and prepare certain reports regarding our compliance with federal health care programs. Developing and maintaining these processes, policies and procedures necessary to comply with the Corporate Integrity Agreement will require a significant portion of management’s attention and the application of significant resources. In addition, while we have developed and instituted a corporate compliance program, we cannot guarantee that we, our employees, our consultants or our contractors are or will be in compliance with all potentially applicable U.S. federal and state regulations and/or laws, all potentially applicable foreign regulations and/or laws and/or all requirements of the Corporate Integrity Agreement. If we breach the Corporate Integrity Agreement, we could become liable for payment of certain stipulated penalties or could be excluded from participation in federal health care programs. The costs associated with compliance with the Corporate Integrity Agreement, or any liability or consequences associated with its breach, could have an adverse effect on our business.

Physicians and staff may not commit enough time to sufficiently learn how to use our products.

In order for physicians and staff to learn to use our products and familiarize themselves with our technology, we encourage physicians to attend structured training sessions. There are many nuances to successfully using our products. For example, the DABRA catheter is fragile and may be prone to bending, a problem known as kinking. In addition, the DABRA laser needs to be calibrated correctly for each use. During the fourth quarter of 2018 and into 2019, we saw an increase in calibration issues experienced by physicians. In addition, in reviewing the performance inconsistencies, we found that our catheters occasionally overheated, which could cause a risk of injury to patients and physicians. Although

-16-

we are instituting measures intended to improve calibration and decrease kinking in the future, physicians and their staff must utilize the technology on a regular basis to ensure they maintain the skill set necessary to use our products. This will depend on their willingness to attend training sessions or sufficiently familiarize themselves with DABRA. An inability to train a sufficient number of physicians to generate adequate demand for our products could have a material adverse effect on our business, financial condition, and results of operations.

Our products may not gain or maintain market acceptance among physicians and patients and others in the medical community.

Our success will depend, in part, on the acceptance of our products as safe, useful and, with respect to physicians, cost effective and easy to use. We cannot predict how quickly, if at all, catheterization laboratories

-18-

and physicians will accept our products or, if accepted, how frequently they will be used. Patients and their care providers must believe our products offer benefits over alternative treatment methods. Additional factors that will influence whether our products gain and maintain market acceptance, include:

-17-

If we do not adequately educate physicians about PAD and the existence and proper use of our products, DABRA may not gain market acceptance, as many physicians do not routinely screen for PAD while screening for coronary artery disease, or CAD. Additionally, even if our products achieve market acceptance, they may not maintain that market acceptance over time if competing products or technologies are introduced that are received more favorably or are more cost effective. Failure to achieve or maintain market acceptance and/or market share would limit our ability to generate revenue and would have a material adverse effect on our business, financial condition, and results of operations.

-19-

The continuing development of our products depends upon our developing and maintaining strong working relationships with physicians.

The research, development, marketing and sale of our current products and any potential new and improved products or future product indications for which we receive regulatory clearance or approval depend upon our maintaining working relationships with physicians. We rely on these professionals to provide us with considerable knowledge and experience regarding the development, marketing and sale of our products. Physicians assist us as researchers, marketing and product consultants and public speakers. If we cannot maintain our strong working relationships with these professionals and continue to receive their advice and input, the development and marketing of our products could suffer, which could have a material adverse effect on our business, financial condition, and results of operations. At the same time, companies in the medical device industry are under continued scrutiny by the OIG and the DOJ, for improper relationships with physicians. For example, on December 28, 2020, we entered into a Settlement Agreement and a related Corporate Integrity Agreement related to a resolution of a DOJ civil investigation concerning, among other things, whether we paid improper remuneration to physicians and other healthcare providers in violation of the Anti-Kickback Statute, 42 U.S.C. §1320a-7b.§1320a-7b. Our failure to comply with the Corporate Integrity Agreement or requirements governing the industry’sindustry’s relationships with physicians, including the reporting of certain payments to physicians under the National Physician Payment Transparency Program (Open Payments) or the reputational harm or negative publicity resulting from the settlement of the pending government investigation could impact physicians’ willingness to conduct business with us, which would have a material adverse effect on our business, financial condition, and results of operations.

We have experienced inconsistencies in our DABRA catheter performance. This and any other development or manufacturing problems or delays could limit the potential growth of our revenue or increase our losses.

Beginning in the fourth quarter of 2018, we started experiencing inconsistencies in our DABRA catheter performance. We believed at the time that these inconsistencies were related to controlling the temperature of the oven used in the manufacturing process, which we had previously referred to as production limitations. These inconsistencies led to an increase in the number of catheters that failed to calibrate at customer sites, despite calibrating successfully during our quality assurance steps. During that same period, our sales team noted higher rates of non-calibration of catheters at customer physician offices. The higher-than-anticipated rates of non-calibration resulted in customer dissatisfaction with the product, resulting in what we believe to be fewer purchases by our customers and therefore lower revenue during the fourth quarter of 2018 and into 2019. However, the decrease in purchases and the impact of such decrease on our revenues is not determinable. In response, we upgraded our temperature control regulator and made certain changes in our production flow and validated the changes that we believed corrected the production limitations. After manufacturing several well-performing lots with this upgraded process, the percentage of catheters that failed to calibrate at customer sites began to increase after decreasing during April and May 2019. After collecting field data and performing internal testing, we observed that while catheters can perform satisfactorily up to one year, catheters that were more than two months from sterilization had a significantly higher rate of non-calibration than catheters that were within two months from sterilization. As a result, in September 2019, we initiated a voluntary recall of our catheters to replace 12-month shelf life labeled catheters with two-month shelf life labeled catheters. At the FDA’s request, we engaged in additional shelf life testing as part of a special 510(k) and suspended commercial sales of catheters in order to remedy the shelf life issues. The FDA subsequently decided not to clear the special 510(k) and requested to see additional test data to confirm the stability of the shelf life before permitting us to resume commercial sales. We submitted this additional test data with respect to the DABRA shelf life in March 2021 in a traditional 510(k) and received clearance by the FDA in July 2021.

There can be no assurance that we will be able to timely correct the performance issues related to the DABRA catheters or that a premarket FDA submission would not be required for such changes. In addition, the manufacture of our products is subject to strict regulatory requirements as described in the risk factor titled “Our medical device operations are subject to pervasive and continuing FDA regulatory requirements.” Problems can

-20-

arise during the manufacturing

-18-

process for a number of reasons, including equipment malfunction, failure to maintain or follow necessary protocols and procedures, raw material problems or human error. If we are unable to timely remedy our inconsistencies in our DABRA catheter performance or if we otherwise fail to meet our internal quality standards or the quality system regulations enforced by the FDA or other applicable regulatory bodies, which include detailed manufacturing and quality obligations, our reputation could be damaged, we could be required to issue a safety alert to our customer or initiate a recall, we could incur product liability and other costs, product approvals could be delayed, suspended or revoked, enforcement action could be initiated by regulatory authorities, we could be required to cease commercialization of DABRA and our business could otherwise be adversely affected.

In addition, our production processes and assembly methods may require additional changes to accommodate any significant expansion of our manufacturing capacity, which may increase our manufacturing costs, delay production of our products, reduce our product margin, be subject to FDA approval and adversely impact our business. Conversely, if demand for our products shifts such that a manufacturing facility is operated below its capacity for an extended period, we may adjust our manufacturing operations to reduce fixed costs, which could lead to uncertainty and delays in manufacturing times and quality during any transition period.

Additionally, since our products are manufactured at our sole manufacturing facility in Carlsbad, California, any contamination of the controlled environment, equipment malfunction, or failure to strictly follow procedures can significantly reduce our yield. A drop in yield can increase our cost to manufacture our products or, in more severe cases, require us to halt the manufacture of our products until the problem is resolved. Identifying and resolving the cause of a drop in yield can require substantial time and resources.

If our manufacturing activities are adversely impacted, our revenue could be impaired, market acceptance for our products could be adversely affected and our customers might instead purchase our competitors’competitors’ products, which would have a material adverse effect on our business, financial condition, and results of operations.

We may face additional issues associated with the voluntary recall of our DABRA catheters if we are unable to show that we initiated a timely recall and improved calibration rates in the use of our DABRA catheters.

In the third quarter of 2019, we initiated a voluntary recall of our DABRA catheters to replace 12-month shelf life labeled catheters with two-month shelf life labeled catheters, as we observed through field data and internal testing that catheters more than two months from sterilization have a significantly higher rate of non-calibration. While the newly labeled DABRA catheters showed a significant decrease in non-calibrations, we have paused commercial sales of DABRA catheters not being used for the atherectomy clinical trial while we continue our engineering efforts to improve the shelf life of our catheters.

We have incurred losses in recent periods and may be unable to achieve profitability in the future.

We incurred losses from continuing operations of $19.0 million and $35.5 million for the nine months ended September 30, 2021 and the year ended December 31, 2020, respectively. As of September 30, 2021, we had an accumulated deficit of $170.0 million. We expect to continue to incur significant manufacturing, product development, regulatory and other expenses as we continue to remedy the inconsistencies in our DABRA catheter performance, to obtain regulatory clearances or approvals for our products in additional jurisdictions and for additional indications, to develop new products or add new features to our existing products, and to defend, cooperate and resolve pending lawsuits and government investigation, as applicable. In addition, our general and administrative expenses have increased following our IPO and we expect these costs to continue due to the additional costs associated with being a public company. The losses that we incur may fluctuate significantly from period to period. We will need to generate significant additional revenue in order to achieve and sustain profitability and, even if we achieve profitability, we cannot be sure that we will remain profitable for an

-21-

extended period of time. Our failure to achieve or maintain profitability would have a material adverse effect on our business, financial condition, and results of operations and could negatively impact the value of our common stock.

-19-

If our sole manufacturing facility becomes damaged or inoperable, or we are required to vacate the facility, our ability to manufacture and sell our products and to pursue our research and development efforts may be jeopardized.

We currently manufacture and assemble our products in our sole manufacturing facility in Carlsbad, California. Our products consist of components sourced from a variety of suppliers, with final assembly completed at our facility. Our facility and equipment, or those of our suppliers, could be harmed or rendered inoperable by natural or man-made disasters, including earthquakes, fires, power shortages, telecommunications failures, water shortages, floods, hurricanes, typhoons, extreme weather conditions, medical epidemics, and other natural or man-made disasters, pandemics, epidemics, or other business interruptions, for which we are predominantly self-insured. Any of these may render it difficult or impossible for us to manufacture products for an extended period of time. If our facility is inoperable for even a short period of time, the inability to manufacture our current products, and the interruption in research and development of any future products, may result in harm to our reputation, increased costs, lower revenue and the loss of customers, which would have a material adverse effect on our business, financial condition, and results of operations. Furthermore, it could be costly and time-consuming to repair or replace our facilitiesfacility and the equipment we use to perform our research and development work and manufacture our products. We also rely on third-party component suppliers, and our ability to obtain commercial supplies of our products could be disrupted if the operations of these suppliers are affected by a man-made or natural disaster or other business interruption, which would have a material adverse effect on our business, financial condition, and results of operations.

The emergence and effects related to a pandemic, epidemic or outbreak of an infectious disease, including the current COVID-19 pandemic, could adversely affect our operations.

If a disaster such as a pandemic, epidemic, outbreak of an infectious disease or other public health crisis were to occur in an area in which we operate, our operations could be adversely affected. For example, COVID-19 has now been characterized as a global pandemic and how long and how extensive the economic effects will last has not been determined. The extent to which COVID-19 impacts our business will depend on future developments, which are highly uncertain and cannot be predicted, including new information which may emerge concerning the severity of COVID-19 and the actions to contain it or treat its impact, among others. A further spread of the pandemic could cause the temporary closure of our manufacturing facilitiesfacility and those used in our supply chain processes, restrictions on the export or shipment of our products, business closures in impacted areas, and further restrictions on our employees’ and consultants’ ability to travel and to meet with customers. The pandemic has caused, and will likely continue to cause, delays in enrollment in our atherectomy indication trial. In addition, we have experienced delays in receiving shipments of parts which has had an impact on the timing of our key engineering efforts but has not affected our ability to support our atherectomy indication clinical trial. The pandemic could also adversely affect our ability to secure additional financing in a timely manner or on favorable terms, if at all.

We are involved in securities litigation, and an adverse resolution of such litigation may adversely affect our business, financial condition, results of operations and cash flows.

In June 2019, we became the subject of a lawsuit alleging securities law violations based on alleged misstatements or omissions in the Registration Statement for our IPO and in subsequent public statements. This type of litigation can be expensive and disruptive to normal business operations, and the outcome can be difficult to predict regardless of the facts involved. An unfavorable outcome with respect to this lawsuit could have a material adverse effect on our business, financial condition, results of operations or cash flows. For additional information regarding this lawsuit, see Note 14. Commitments and Contingencies in the notes to the unaudited condensed financial statements included elsewhere in this prospectus.

-20-

-22-

If product liability lawsuits are brought against us, we may incur substantial liabilities and may be required to limit or halt the marketing and sale of our products and could result in recalls, delayed shipments and rejection of our products and damage to our reputation and could expose us to regulatory or other legal action.

We face an inherent risk of product liability as a result of the marketing and sale of our products. For example, we may be sued if our products cause or are perceived to cause injury or are found to be otherwise unsuitable during manufacturing, marketing or sale. For example, in connection with the review of our performance inconsistencies, our catheters were found to occasionally overheat. Any product liability claim may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability or breach of warranty. In addition, we may be subject to claims against us even if the apparent injury is due to the actions of others or the pre-existing health of the patient. For example, we rely on physicians in connection with the use of our products on patients. If these physicians are not properly trained, including on the intended use, or are negligent, the capabilities of our products may be diminished, or the patient may suffer critical injury. We may also be subject to claims that are caused by the activities of our suppliers, such as those who provide us with components and sub-assemblies.

There can be no assurance that we will be able to detect, remedy and report all defects in the products that we sell, including successfully remedying the issues with our catheters’ performance. These issues with performance could result in the rejection of our products by physicians, damage to our reputation, lost sales, diverted development resources and increased customer service and support costs and warranty claims. Individuals could sustain injuries from our products, and we may be subject to claims or lawsuits resulting from such injuries. There is a risk that these claims or liabilities may exceed, or fall outside the scope of, our insurance coverage. Moreover, we may not be able to retain adequate liability insurance in the future.

If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities or be required to limit, delay or halt commercialization of our products. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in:

We believe our product liability insurance is customary for similarly situated companies, but it may not be adequate to cover all liabilities that we may incur. We may not be able to maintain or obtain insurance at a reasonable cost or in an amount adequate to satisfy any liability that may arise, if at all. Our insurance policy contains various exclusions, and we may be subject to a product liability claim for which we have no coverage. The potential inability to obtain sufficient product liability insurance at an acceptable cost to protect against product liability claims could prevent or inhibit the marketing and sale of products we develop. We may have to

-23-

pay any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient capital to pay such amounts, which would have a material adverse effect on our business, financial condition, and results of operations.

-21-

We face substantial competition, which may result in others discovering, developing or commercializing products more successfully than us.

The medical device industry is intensely competitive and subject to rapid and significant technological change. Many of our competitors have significantly greater financial, technical and human resources. Smaller and early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies.

Our competitors may also develop products that are more effective, more convenient, more widely used, less costly, have higher reimbursement coverage or have a better safety profile than our products and these competitors may also be more successful than us in manufacturing and marketing their products.

Our competitors also compete with us in recruiting and retaining qualified scientific, management and commercial personnel, as well as in acquiring technologies complementary to, or necessary for, our programs. Competition for these people in the medical device industry is intense and we may face challenges in retaining and recruiting such individuals if, for example, other companies may provide more generous compensation and benefits, more diverse opportunities, and better chances for career advancement than we do. Some of these advantages may be more appealing to high-quality candidates and employees than those we have to offer. In addition, the decline in our stock price has created additional challenges by reducing the retention value of our equity awards. Because of the complex and technical nature of our systems and the dynamic market in which we compete, any failure to attract and retain a sufficient number of qualified employees could materially harm our ability to develop and commercialize our technology, which would have a material adverse effect on our business, financial condition, and results of operations.

We may be unable to compete successfully with companies in our highly competitive industry, many of whom have substantially greater resources than we do.

The healthcare industry is highly competitive. There are numerous approved products for treating vascular diseases in the indications in which we have received clearance or approval and those that we may pursue in the future. Many of these cleared or approved products are well-established and are widely accepted by physicians, patients and third-party payors. Insurers and other third-party payors may encourage the use of competitors’competitors’ products. In addition, many companies are developing products, and we cannot predict what the standard of care will be in the future.

Our primary competitors for DABRA include Medtronic plc, Cardiovascular Systems Inc., Boston Scientific Corp., Avinger, Inc., Koninklijke Philips N.V., including Volcano Corporation and Spectranetics Corporation, Becton Dickinson and Company, including products from the C.R. Bard acquisition, AngioDynamics and Abbott Laboratories. These companies are manufacturers of products used in competing therapies within the peripheral arterial disease market such as:

We also face competition from pharmaceutical companies that produce drugs which aim to destroy plaque or remove blockages in the bloodstream.

-24-

Many of our competitors have substantially greater financial, manufacturing, commercial, and technical resources than we do. There has been consolidation in the industry, and we expect that to continue. Larger competitors may have substantially larger sales and marketing operations than we do. This may allow those competitors to spend more time with current and potential customers and to focus on a larger number of current and potential customers, which gives them a significant advantage over our sales and marketing team and our international distributors in making sales. In addition, we are often selling to customers who already utilize our competitors’competitors’ products and who have established relationships with our competitors’competitors’ sales representatives and familiarity with our competitors’competitors’ products.

-22-

Larger competitors may also have broader product lines, which enables them to offer customers bundled purchase contracts and quantity discounts. These competitors may have more experience than we have in research and development, marketing, manufacturing, preclinical testing, conducting clinical trials, obtaining FDA and non-U.S. regulatory clearances or approvals and marketing cleared or approved products. Our competitors may discover technologies and techniques, or enter into partnerships and collaborations, to develop competing products that are more effective or less costly than our products or the products we may develop. For example, our competitors with laser-based products may develop upgrades to their lasers that make them easier to use, more efficient or more functional and they may more quickly obtain necessary FDA and non-U.S. regulatory clearances and approvals for such improvements. This may render our technology or products obsolete or noncompetitive. Our competitors may also be better equipped than we are to respond to competitive pressures. If we are unable to compete successfully in our industry, it would have a material adverse effect on our business, financial condition, and results of operations.

If DABRA is not cleared or approved for new indications, our commercial opportunity will be limited.

We market and sell DABRA for use as a tool in the treatment of vascular blockages resulting from lower extremity vascular disease. Although physicians, in the practice of medicine, may prescribe or use marketed products for uncleared or unapproved indications, manufacturers may promote their products only for the cleared or approved indications and in accordance with the provisions of the cleared or approved label. However, one of our strategies in the future is to pursue additional vascular indications for DABRA. Submitting the required applications for additional indications may require substantial additional funding beyond our cash and cash equivalents as of September 30, 2021. We cannot assure you that we will be able to successfully obtain clearance or approval for any of these additional product indications through the application process or that a premarket FDA submission may not be necessary.

Even if we obtain FDA clearance or approval to market our products for additional indications in the U.S., we cannot assure you that any such indications will be successfully commercialized, widely accepted in the marketplace or more effective than other commercially available alternatives. If we are unable to successfully develop our products for additional indications, our commercial opportunity will be limited, which would have a material adverse effect on our business, financial condition, and results of operations.

If we make acquisitions or divestitures, we could encounter difficulties that harm our business.

To date, the growth of our business has been organic, and we have no experience in acquiring other businesses, products or technologies. We may acquire companies, products or technologies that we believe to be complementary to the present or future direction of our business. If we engage in such acquisitions, we may have difficulty integrating the acquired personnel, financials, operations, products or technologies. Acquisitions may dilute our earnings per share, disrupt our ongoing business, distract our management and employees, increase our expenses, subject us to liabilities, and increase our risk of litigation, all of which could harm our business. If we use cash to acquire companies, products or technologies, it may divert resources otherwise available for other purposes. If we use our common stock to acquire companies, products or technologies, our stockholders may experience substantial dilution.

-25-

Technological change may adversely affect sales of our products and may cause our products to become obsolete.

The medical device market is characterized by extensive research and development and rapid technological change. Technological progress or new developments in our industry could adversely affect sales of our products. Our products could be rendered obsolete because of future innovations by our competitors or others in the treatment of vascular diseases, which would have a material adverse effect on our business, financial condition, and results of operations.

Consolidation in the medical device industry could have an adverse effect on our revenue and results of operations.

Many medical device industry companies are consolidating to create new companies with greater market power. For example, the Spectranetics Corporation was acquired by Koninklijke Philips N.V in 2017. As the medical device industry consolidates, competition to provide goods and services to industry participants will become more intense. These industry participants may try to use their market power to negotiate price concessions or reductions for medical devices that incorporate components produced by us. If we reduce our prices because of consolidation in the healthcare industry, our revenue would decrease and our earnings, financial condition, or cash flows would suffer, which would have a material adverse effect on our business, financial condition, and results of operations.

-23-

We may be subject to enforcement actions, competitor lawsuits, or other claims if we engage or are found to have engaged in the off-label promotion of our products.

Our promotional materials and training methods must comply with FDA regulations and other applicable laws, including restraints and prohibitions on the promotion of off-label, or uncleared use, of our products. Physicians may use our products for off-label use without regard to these prohibitions, as FDA regulations do not restrict or regulate a physician’sphysician’s choice of treatment within the practice of medicine. Although our policy is to follow published FDA guidance in order to avoid promoting our products improperly, the FDA or other regulatory agencies or third parties could disagree and conclude that we have engaged in off-label promotion. For example, our DABRA Laser System has been cleared by the FDA for crossing chronic total occlusions in patients with symptomatic infrainguinal lower extremity vascular disease and has an intended use for ablating a channel in occlusive peripheral vascular disease. We have not received FDA clearance or approval to market DABRA for an atherectomy indication, and we may not promote DABRA for an atherectomy indication. Without admitting any liability or wrongdoing, on December 28, 2020, we entered into a Settlement Agreement with the DOJ, other settlement agreements with certain state attorneys general and a related Corporate Integrity Agreement that resolved civil investigations and a related civil lawsuit. Our pivotal clinical study of the DABRA Laser System completed in 2017 would not be sufficient to expand our FDA-cleared indication for use to an atherectomy indication for use, which the FDA currently defines to include a prespecified improvement in luminal patency, or prespecified increase in the openness of the artery at a pre-defined time point, such as nine months following a DABRA procedure, using a consistent assessment tool.

We cannot predict the extent to which our competitors may be successful in dissuading physicians from using the DABRA system out of concerns regarding reimbursement. Furthermore, we may incur additional liability from claims initiated under the Lanham Act or other federal and state unfair competition laws with respect to how our products have been marketed and promoted.

In addition, we operate in an industry characterized by extensive litigation. However, the scope of potential liability with respect to any such claims, enforcement actions, or lawsuits is uncertain, and we cannot assure you that we will not receive claims from competitors or other third parties or be subject to enforcement actions in the future from regulatory agencies. For example, the FDA, FTC, the Office of the Inspector General of the Department of Health and Human Services,, or HHS, the DOJ and various state attorneys general actively enforce

-26-

laws and regulations that prohibit the promotion of off-label uses. As disclosed above, on December 28, 2020, we entered into a Settlement Agreement and the related Corporate Integrity Agreement to resolve a DOJ civil investigation into, among other things, whether we marketed and promoted DABRA devices for unapproved uses that were not covered by federal healthcare programs, and in connection with the Settlement Agreement, we also have reached agreements with certain state attorneys general.

The False Claims Act prohibits, among other things, making a fraudulent claim for payment of federal funds, causing such a fraudulent claim to be made, or making a false statement to get a false claim paid. The government may assert that a claim resulting from a violation of the federal anti-kickback statute constitutes a false or fraudulent claim under the False Claims Act. Many companies have faced government investigations or lawsuits by whistleblowers who bring aqui tam action under the False Claims Act on behalf of themselves and the government for a variety of alleged improper marketing activities, including providing free product to customers expecting that the customers would bill federal programs for the product, providing consulting fees, grants, free travel and other benefits to physicians to induce them to prescribe the company’s products, and inflating prices reported to private price publication services, which are used to set drug reimbursement rates under government healthcare programs. In addition, the government and private whistleblowers have pursued False Claims Act cases against medical device companies for causing false claims to be submitted as a result of the marketing of their products for unapproved uses. Medical device and other healthcare companies also are subject to other federal false claim laws, including federal criminal healthcare fraud and false statement statutes that extend to non-government health benefit programs. If we are found to have improperly promoted off-label uses, we may be subject to significant liability, including civil fines, criminal fines and penalties, civil damages, exclusion from federal funded healthcare programs and potential liability under the federal False Claims Act and any applicable state false claims act. Due to the Settlement Agreement and the Corporate Integrity Agreement and the concluded SEC investigation, we have incurred, and will continue to incur, substantial legal costs, including settlement costs, costs of compliance with such agreements, and payments made pursuant to such agreements, and business disruption, including from ongoing and future

-24-

compliance with such agreements. In the future, if we are found to have violated the False Claims Act, it may result in significant financial penalties, on a per claim or statement basis, treble damages and exclusion from participation in federal health care programs. In addition, if the FDA determines that our promotional materials or training constitutes promotion of an off-label use, it could request that we modify our training or promotional materials, which could negatively impact our marketing and decrease demand for our products. Conduct giving rise to such liability could also form the basis for private civil litigation by third-party payers, competitors, or other persons claiming to be harmed by such conduct.

The FDA, HHS, DOJ, and/or state attorneys general, competitors, and other third parties may take the position that we have violated or are not in compliance with such guidelines, and if such non-compliance is proven, it could harm our reputation, financial condition or divert financial and management resources from our core business and would have a material adverse effect on our business, financial condition and results of operations. Moreover, threatened or actual government enforcement actions or lawsuits by third parties have and could continue to generate adverse publicity, which could decrease demand for our products and require that we devote substantial resources that could be used productively on other aspects of our business.

Regardless of whether actions are commenced, if we were to settle with one or more government agencies, including those conducting the ongoing and unresolved investigation identified above, such settlements could include an agreement to pay civil or criminal damages, injunctions, cease and desist orders, deferred prosecution agreements, or other equitable remedies, exclusion from governmental health care programs, and the curtailment or restructuring of our operations, any of which would have a material adverse effect on our business, financial condition and results of operations for years after any settlement is reached. In light of the ongoing nature of the investigation, whether actions will be commenced, whether this investigation can be settled before or after actions are commenced, and the terms on which this investigation can be resolved is not certain.

-27-

Litigation and other legal proceedings may adversely affect our business.

From time to time we are involved in and may become involved in legal proceedings relating to patent and other intellectual property matters, product liability claims, employee claims, tort or contract claims, federal regulatory investigations, securities class action, and other legal proceedings or investigations, which could have an adverse impact on our reputation, business and financial condition and divert the attention of our management from the operation of our business. For example, we are currently a party to securities litigation and other litigation as set forth in the “Legal Proceedings.” Litigation is inherently unpredictable and can result in excessive or unanticipated verdicts and/or injunctive relief that affect how we operate our business. We could incur judgments or enter into settlements of claims for monetary damages or for agreements to change the way we operate our business, or both. There may be an increase in the scope of these matters or there may be additional lawsuits, claims, proceedings or investigations in the future, which could have a material adverse effect on our business, financial condition, and results of operations. Adverse publicity about regulatory or legal action against us could damage our reputation and brand image, undermine our customers’customers’ confidence and reduce long-term demand for our products, even if the regulatory or legal action is unfounded or not material to our operations.

We must indemnify or advance reasonable legal expenses for officers and directors, including, in certain circumstances, former employees and directors, in their defense against legal proceedings, unless certain conditions apply. A prolonged uninsured expense and indemnification obligation could have a material adverse effect on our business, financial condition, and results of operations.

We are subject to numerous laws and regulations related to healthcare fraud and abuse, false claims, anti-bribery and anti-corruption laws, such as the U.S. Anti-Kickback Statute and Foreign Corrupt Practices Act of 1977, in which violations of these laws could result in substantial penalties, exclusion and prosecution.

In the U.S., we are subject to various state and federal fraud and abuse laws, including, without limitation, the federal Anti-Kickback Statute and federal False Claims Act. There are similar laws in other countries. These laws may impact, among other things, the sales, marketing and education programs for our products. The federal Anti-Kickback Statute prohibits persons from knowingly and willingly soliciting, offering, receiving or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing or arranging for a good or service, for which payment may be made under a federal healthcare program. The federal False Claims Act prohibits persons from knowingly filing, or causing to be filed, a false claim to, or the knowing use of false statements to obtain

-25-

payment from the federal government. Any allegation, investigation, or violation of domestic healthcare fraud and abuse laws could result in government or internal investigations, significant diversion of resources, exclusion from government healthcare programs and the curtailment or restructuring of our operations, significant fines, penalties, or other financial consequences, any of which may ultimately have a material adverse effect on our business, financial condition, and results of operations.

For our sales and operations outside the U.S., we are similarly subject to various heavily enforced anti-bribery and anti-corruption laws, such as the U.S. Foreign Corrupt Practices Act of 1977, as amended, or FCPA, U.K. Bribery Act, and similar laws around the world. These laws generally prohibit U.S. companies and their employees and intermediaries from offering, promising, authorizing or making improper payments to foreign government officials for the purpose of obtaining or retaining business or gaining any advantage. We face significant risks if we, which includes our third parties, fail to comply with the FCPA and other anti-corruption and anti-bribery laws.

We leverage various third parties to sell our products and conduct our business abroad, including to government-owned universities and hospitals. We, our distributors and channel partners, and our other third-party intermediaries may have direct or indirect interactions with officials and employees of government agencies or state-owned or affiliated entities (such as in the context of obtaining government approvals,

-28-

registrations, or licenses or sales to government owned or controlled healthcare facilities, universities, institutes, clinics, etc.) and may be held liable for the corrupt or other illegal activities of these third-party business partners and intermediaries, our employees, representatives, contractors, partners, and agents, even if we do not explicitly authorize such activities. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses engage in practices that are prohibited by the FCPA or other applicable laws and regulations. To that end, while we have adopted and implemented internal control policies and procedures and employee training and compliance programs to deter prohibited practices, such compliance measures ultimately may not be effective in prohibiting our employees, contractors, third parties, intermediaries or agents from violating or circumventing our policies and/or the law.

Responding to any enforcement action or related investigation may result in a materially significant diversion of management’smanagement’s attention and resources and significant defense costs and other professional fees. Any violation of the FCPA, other applicable anti-bribery, anti-corruption laws, healthcare laws, and anti-money laundering laws could result in whistleblower complaints, adverse media coverage, investigations, loss of export privileges, severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracts, which could have a material and adverse effect on our reputation, business, financial condition, and results of operations for years after these investigations are resolved.

Governmental export or import controls could limit our ability to compete in foreign markets and subject us to liability if we violate them.

Our products may be subject to U.S. export controls. Governmental regulation of the import or export of our products, or our failure to obtain any required import or export authorization for our products, when applicable, could harm our international sales and adversely affect our revenue. Compliance with applicable regulatory requirements regarding the export of our products may create delays in the introduction of our products in international markets or, in some cases, prevent the export of our products to some countries altogether. Furthermore, U.S. export control laws and economic sanctions prohibit the shipment of certain products and services to countries, governments, and persons targeted by U.S. sanctions. If we fail to comply with export and import regulations and such economic sanctions, we may be fined, or other penalties could be imposed, including a denial of certain export privileges. Moreover, any new export or import restrictions, new legislation or shifting approaches in the enforcement or scope of existing regulations, or in the countries, persons, or technologies targeted by such regulations, could result in decreased use of our products by, or in our decreased ability to export our products to existing or potential customers with international operations. Any decreased use of our products or limitation on our ability to export or sell access to our products would likely materially and adversely affect our business, financial condition, and results of operations.

A variety of risks associated with marketing our products internationally could materially adversely affect our business.

In addition to selling our products in the U.S., we have sold DABRA outside of the U.S. in the past. We are subject to additional risks related to operating in foreign countries, including:

-26-

subject to similar risks. Technological interruptions would impact our business operations would disrupt our operations, including our ability to timely ship and track product orders, project inventory requirements, manage our supply chain and otherwise adequately service our customers or disrupt our customers’customers’ ability use our products for treatments. In the event we experience significant disruptions, we may be unable to repair our systems in an efficient and timely manner. Accordingly, such events may disrupt or reduce the efficiency of our entire operation and have a material adverse effect on our business, financial condition, and results of operations. Currently, we carry business interruption coverage to mitigate certain potential losses, but this insurance is limited in amount, subject to deductibles, and we cannot be certain that such potential losses will not exceed our policy limits. We are increasingly dependent on complex information technology to manage our infrastructure. Our information systems require an ongoing commitment of significant resources to maintain, protect and enhance our existing systems. Failure to maintain or protect our information systems and data integrity effectively could have a material adverse effect on our business, financial condition, and results of operations.

Failure to maintain effective internal controls could cause our investors to lose confidence in us and adversely affect the market price of our common stock. If our internal controls are not effective, we may not be able to accurately report our financial results or prevent fraud.

We are required, pursuant to Section 404 of the Sarbanes-Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting. As an “emerging growth company,” we will avail ourselves of the exemption from the requirement that our independent registered public accounting firm attest to the effectiveness of our internal control over financial reporting under Section 404. However, we may no longer avail ourselves of this exemption when we cease to be an “emerging growth company” unless at that time we are still a “smaller reporting company.” When our independent registered public accounting firm is required to undertake an assessment of our internal control over financial reporting, the cost of our compliance with Section 404 will correspondingly increase. Our compliance with applicable provisions of Section 404 will require that we incur substantial accounting expense and expend significant management time on compliance-related issues as we implement additional corporate governance practices and comply with reporting requirements. Moreover, if we are not able to comply with the requirements of Section 404 applicable to us in a timely manner, or if we or our independent registered public accounting firm identifies deficiencies in our internal control over financial reporting that are deemed to be material weaknesses, the market price of our stock could decline and we could be subject to sanctions or investigations by the SEC or other regulatory authorities, which would require additional financial and management resources.

In reviewing the allegations and findings from an Audit Committee investigation related to an initially anonymous complaint in 2019, as well as additional matters discovered during the course of the investigation, we identified material weaknesses in our internal control over financial reporting. A material weakness is a significant deficiency, or a combination of significant deficiencies, in internal control over financial reporting such that it is reasonably possible that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. The material weaknesses that we identified related to the aggregation of control deficiencies in our control environment, in particular an inappropriate “tone at the top” set by certain members of senior management, a failure to promote adherence to our Code of Ethics and Conduct, and the lack of sufficient competent resources in key roles at the organization.

-28-

The material weaknesses discussed were remediated as of December 31, 2019. We incurred significant costs to remediate those weaknesses, primarily personnel costs, external consulting and legal fees, system implementation costs, and related indirect costs including the use of facilities and technology. However, completion of remediation does not provide assurance that our controls will operate properly or that our financial statements will be free from error, which may undermine our ability to provide accurate, timely and reliable reports on our financial and operating results. There may be additional undetected material weaknesses in our internal control over financial reporting, as a result of which we may not detect financial statement errors on a timely basis. Further, to the extent we identify additional material weaknesses, we will not be able to fully assess whether corrective measures will remediate the material weakness in our internal control over financial reporting

-31-

until we have completed our implementation efforts and sufficient time passes in order to evaluate their effectiveness. In addition, if we identify additional errors that result in material weaknesses in our internal control over financial reporting, we may not detect errors on a timely basisand our financial statements may be materially misstated. Moreover, in the future we may engage in business transactions, such as acquisitions, reorganizations or implementation of new information systems that could negatively affect our internal control over financial reporting and result in material weaknesses.

If we identify additional material weaknesses in our internal control over financial reporting, if we are unable to comply with the requirements of Section 404 in a timely manner, if we are unable to assert that our internal control over financial reporting is effective, or if our independent registered public accounting firm is unable to express an opinion as to the effectiveness of our internal control over financial reporting, we may be late with the filing of our periodic reports, investors may lose confidence in the accuracy and completeness of our financial reports and the market price of our common stock could be negatively affected. As a result of such failures, we could also become subject to investigations by the stock exchange on which our securities are listed, the SEC, or other regulatory authorities, and become subject to litigation from investors and stockholders, which could harm our reputation, financial condition or divert financial and management resources from our core business, and would have a material adverse effect on our business, financial condition and results of operations.

In order to increase our revenue over the longer term, we will need to grow the size of our organization, and we may experience difficulties in managing this growth.

At December 31, 2021, we had 61 full-time employees. In the third quarter of 2019, we began implementing certain operational efficiency and cost savings initiatives intended to align our resources with our product strategy, reduce our operating expenses, and manage our cash flows. These cost efficiency initiatives include targeted workforce reductions of our sales and marketing teams.

Over the longer term, we intend to hire and train additional skilled sales personnel. At such time, we would expect to need additional managerial, operational, sales, marketing, financial, and other personnel. Future growth would impose significant added responsibilities on members of management, including:

Our future financial performance and our ability to successfully market and sell our products will depend, in part, on our ability to effectively manage any future growth, and our management may also have to divert a disproportionate amount of its attention away from day-to-day activities in order to devote a substantial amount of time to managing these growth activities.

If we are not able to effectively expand our organization by hiring new employees and expanding our groups of consultants and contractors, we may not be able to successfully implement the tasks necessary to further develop and commercialize our products and, accordingly, may not achieve our research, sales and marketing goals, which would have a material adverse effect on our business, financial condition, and results of operations.

-29-

We actively employ social media as part of our marketing strategy, which could give rise to regulatory violations, liability, fines, breaches of data security or reputational damage.

Despite our efforts to monitor evolving social media communication guidelines and comply with applicable rules, there is risk that the use of social media by us, our employees or our customers to communicate about our

-32-

products or business may cause us to be found in violation of applicable requirements, including requirements of regulatory bodies such as the FDA and Federal Trade Commission. For example, promotional communications and endorsements on social media that, among other things, promote our products for uses or in patient populations that are not described in the product’sproduct’s approved labeling (known as “off-labeloff-label uses” uses”), do not contain a fair balance of information about risks associated with using our products, make comparative or other claims about our products that are not supported by sufficient evidence, and/or do not contain required disclosures could result in an enforcement actions against us. In addition, adverse events, product complaints, off-label usage by physicians, unapproved marketing or other unintended messages posted on social media could require an active response from us, which may not be completed in a timely manner and could result in regulatory action by a governing body. Further, our employees may knowingly or inadvertently make use of social media in ways that may not comply with our corporate policies or other legal or contractual requirements, which may give rise to liability, lead to the loss of trade secrets or other intellectual property, or result in public exposure of personal information of our employees, clinical trial patients, customers and others. Furthermore, negative posts or comments about us or our products in social media could seriously damage our reputation, brand image and goodwill, which would have a material adverse effect on our business, financial condition, and results of operations.

Security breaches, loss of data and other disruptions could compromise sensitive information related to our business or prevent us from accessing critical information and expose us to liability, which could adversely affect our business and our reputation.

In the ordinary course of our business, we may become exposed to, or collect and store sensitive data, including procedure-based information and legally-protected health information, credit card, and other financial information, insurance information, and other potentially personally identifiable information. We also store sensitive intellectual property and other proprietary business information. Although we take measures to protect sensitive information from unauthorized access or disclosure, our information technology, or IT, and infrastructure, and that of our third-party billing and collections provider and other technology partners, may be vulnerable to cyber attacks by hackers or viruses or breached due to employee error, malfeasance or other disruptions. We rely extensively on IT systems, networks and services, including internet sites, data hosting and processing facilities and tools, physical security systems and other hardware, software and technical applications and platforms, some of which are managed, hosted, provided and/or used by third-parties or their vendors, to assist in conducting our business. A significant breakdown, invasion, corruption, destruction or interruption of critical information technology systems or infrastructure, by our workforce, others with authorized access to our systems or unauthorized persons could negatively impact operations. The ever-increasing use and evolution of technology, including cloud-based computing, creates opportunities for the unintentional dissemination or intentional destruction of confidential information stored in our or our third-party providers'providers’ systems, portable media or storage devices. We could also experience a business interruption, theft of confidential information or reputational damage from industrial espionage attacks, malware or other cyber-attacks, which may compromise our system infrastructure or lead to data leakage, either internally or at our third-party providers. Although the aggregate impact on our operations and financial condition has not been material to date, we have been the target of events of this nature and expect them to continue as cybersecurity threats have been rapidly evolving in sophistication and becoming more prevalent in the industry. We are investing in protections and monitoring practices of our data and IT to reduce these risks and continue to monitor our systems on an ongoing basis for any current or potential threats. There can be no assurance, however, that our efforts will prevent breakdowns or breaches to our or our third-party providers’ databases or systems that could adversely affect our business.

-33-

Risks Related to Government Regulation and our Industry

Regulatory compliance is expensive, complex and uncertain, and a failure to comply could lead to enforcement actions against us and other negative consequences for our business.

-30-

The FDA and similar agencies regulate our products as medical devices. Complying with these regulations is costly, time consuming, complex and uncertain. FDA regulations and regulations of similar agencies are wide-ranging and include, among other things, oversight of:

Our current products are subject to extensive regulation by the FDA and non-U.S. regulatory agencies. Further, all of our potential products and improvements of our current products will be subject to extensive regulation and will likely require permission from regulatory agencies and ethics boards to conduct clinical trials, and clearance or approval from the FDA and non-U.S. regulatory agencies prior to commercial sale and distribution. Failure to comply with applicable U.S. requirements may subject us to a variety of administrative or judicial actions and sanctions, such as Form 483 observations, warning letters, untitled letters, product recalls, product seizures, total or partial suspension of production or distribution, injunctions, fines, civil penalties, and criminal prosecution. The FDA can also refuse to clear or approve pending applications. Any enforcement action by the FDA and other comparable non-U.S. regulatory agencies could have a material adverse effect on our business, financial condition, and results of operations.

Our medical device operations are subject to pervasive and continuing FDA regulatory requirements.

Medical devices regulated by the FDA are subject to “general controls”“general controls” which include:

As previously disclosed, the Audit Committee found, among other things, that we, out of a concern for the DABRA catheters’ performance, engaged in efforts to replace product held by customers, which constituted

-34-

product recalls, but were not documented as such. As disclosed above, we have entered into a Settlement Agreement, and the agreements with the participating states, resolving a DOJ civil investigation concerning certain Covered Conduct (as defined in the Settlement Agreement), and the OIG has agreed, conditioned upon our full payment of amounts owed in the Settlement Agreement, and in consideration of our obligations under a Corporate Integrity Agreement, to release our permissive exclusion rights and refrain from instituting any administrative action seeking to exclude us from participating in Medicare, Medicaid, or other federal health care programs as a result of the Covered Conduct. The Corporate Integrity Agreement

-31-

has a five-year term and imposes monitoring, reporting, certification, documentation, oversight, screening, and training obligations on us, including the hiring of a compliance officer and independent review organization.

Some devices known as “510(k)-exempt”“510(k)-exempt” devices can be marketed without prior marketing clearance or approval from the FDA. In addition to the “general“general controls,” Class II medical devices are also subject to “special“special controls,” including in many cases adherence to a particular guidance document and compliance with the performance standard. As Class II, 510(k)-cleared devices, our products are subject to both general and special controls. Instead of obtaining 510(k) clearance, most Class III devices are subject to premarket approval, or PMA. We do not believe any of our current products are Class III devices, but future products could be, which would subject them to the PMA process.

Many medical devices, such as medical lasers, are also regulated by the FDA as “electronic“electronic products.” In general, manufacturers and marketers of “electronic products”“electronic products” are subject to certain FDA regulatory requirements intended to ensure the radiological safety of the products. These requirements include, but are not limited to, filing certain reports with the FDA about the products and defects/safety issues related to the products as well as complying with radiological performance standards.

In addition, we may be required to conduct costly post-market testing and surveillance to monitor the safety or effectiveness of our products, and we must comply with medical device reporting, or MDR, requirements, including the reporting of adverse events and malfunctions related to our products. We are required to file MDRs if our products may have caused or contributed to a serious injury or death or malfunctioned in a way that could likely cause or contribute to a serious injury or death if it were to recur. Any such MDR that reports a significant adverse event could result in negative publicity, which could harm our reputation and future sales. For example, the Audit Committee found that we failed to timely make at least two MDRs to the FDA which have since been reported. Later discovery of previously unknown problems with our products, including unanticipated adverse events or adverse events of unanticipated severity or frequency, manufacturing problems, or failure to comply with regulatory requirements may result in changes to labeling, restrictions on such products or manufacturing processes, withdrawal of the products from the market, voluntary or mandatory recalls, a requirement to repair, replace or refund the cost of any medical device we manufacture or distribute, fines, suspension of regulatory clearances or approvals, product seizures, injunctions or the imposition of civil or criminal penalties which may have a material adverse effect on our business, financial condition, and results of operations.

The medical device industry is now experiencing greater scrutiny and regulation by federal, state and foreign governmental authorities. Companies in our industry are subject to more frequent and more intensive reviews and investigations, often involving the marketing, business practices, and product quality management. For example, as discussed above, on December 28, 2020, we entered into a Settlement Agreement with the DOJ to resolve a civil False Claims Act investigation and related civil action, and in connection with the Settlement Agreement, we also have reached agreements that resolve previously disclosed related investigations conducted by certain state attorneys general. Under the Settlement Agreement, and the agreements with the participating states, we are required to make an initial payment of $2.5 million, of which we paid $2.4 million in December 2020 and $0.1 million in April 2021. We also may be required to make additional payments in the future upon the achievement of revenue targets or consummating a change-in-control transaction. We also entered into a 5-year Corporate Integrity Agreement with the OIG. The Settlement Agreement does not include a release for any conduct other than the Covered Conduct or any criminal liability related to the Covered Conduct. This settlement and our ongoing obligations under the Corporate Integrity Agreement may result in greater and continuing governmental scrutiny of our business in the future.

-35-

Additionally, federal, state and foreign governments and entities have enacted laws and issued regulations and other standards requiring increased visibility and transparency of our interactions with healthcare providers. For example, the U.S. Physician Payment Sunshine Act, now known as Open Payments, requires us to report to the Centers for Medicare & Medicaid Services, or CMS, payments and other transfers of value to all U.S. physicians and U.S. teaching hospitals, with the reported information made publicly available on a searchable website. As previously disclosed, the Audit Committee found that we lacked documentation of sufficient detail and specificity regarding certain payments to physicians, ostensibly for training and consulting services, and as to three physicians did not accurately reflect the purpose and nature of approximately $300,000 of payments, which that could be perceived as an improper attempt to obtain business or to gain special advantage, and we subsequently entered into the Settlement Agreement with the DOJ relating to claims under the

-32-

civil False Claims Act investigation concerning, among other things, whether we marketed and promoted DABRA devices for unapproved uses that were not covered by federal healthcare programs, and whether we paid improper remuneration to physicians and other healthcare providers in violation of the Anti-Kickback Statute. Effective January 2022, we willare also be required to collect and report information on payments or transfers of value to physician assistants, nurse practitioners, clinical nurse specialists, certified registered nurse anesthetists, and certified nurse-midwives. Failure to comply with these legal and regulatory requirements could impact our business, and we have had and will continue to spend substantial time and financial resources to develop and implement enhanced structures, policies, systems and processes to comply with these legal and regulatory requirements, which may also impact our business and which could have a material adverse effect on our business, financial condition, and results of operations for years after any resolution of these investigations and any resulting claims are resolved.

Product clearances and approvals can often be denied or significantly delayed.

Under FDA regulations, unless exempt, a new medical device may only be commercially distributed after it has received 510(k) clearance, is authorized through the de novo classification process, or is the subject of an approved PMA. The FDA will clear marketing of a medical device through the 510(k) process if it is demonstrated that the new product is substantially equivalent to another legally marketed product not subject to a PMA. Sometimes, a 510(k) clearance must be supported by preclinical and clinical data. Our ability to enroll patients in clinical trials, including our atherectomy indication trial, could be impacted by the COVID-19 outbreak, as many patients are electing or being asked to delay procedures at this time.

The PMA process typically is more costly, lengthy and stringent than the 510(k) process. Unlike a 510(k) review which determines “substantial“substantial equivalence,” a PMA requires that the applicant demonstrate reasonable assurance that the device is safe and effective by producing valid scientific evidence, including data from preclinical studies and human clinical trials. Therefore, to obtain regulatory clearance or approvals, we typically must, among other requirements, provide the FDA and similar foreign regulatory authorities with preclinical and clinical data that demonstrate to their satisfaction that our products satisfy the criteria for approval. Preclinical testing and clinical trials must comply with the regulations of the FDA and other government authorities in the U.S. and similar agencies in other countries.

We may be required to obtain PMAs, PMA supplements or additional 510(k) premarket clearances to market modifications to our existing products. The FDA requires device manufacturers to make and document a determination of whether a device modification requires approval or clearance; however, the FDA can review a manufacturer’smanufacturer’s decision. The FDA may not agree with our decisions not to seek approvals or clearances for particular device modifications. If the FDA requires us to obtain PMAs, PMA supplements or premarket clearances for any modification to a previously cleared or approved device, we may be required to cease manufacturing and marketing the modified device and perhaps also to recall such modified device until we obtain FDA clearance or approval. We may also be subject to significant regulatory fines or penalties.

The FDA may not approve our current or future PMA applications or supplements or clear our 510(k) applications on a timely basis or at all. For example, the COVID-19 outbreak could affect the FDA’s ability to

-36-

review applications or supplements. Such delays or refusals could have a material adverse effect on our business, financial condition, and results of operations.

The FDA may also change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently approved or cleared products on a timely basis. Any of these actions could have a material adverse effect on our business, financial condition, and results of operations.

-33-

International regulatory approval processes may take more or less time than the FDA clearance or approval process. If we fail to comply with applicable FDA and comparable non-U.S. regulatory requirements, we may not receive regulatory clearances or approvals or may be subject to FDA or comparable non-U.S. enforcement actions. We may be unable to obtain future regulatory clearance or approval in a timely manner, or at all, especially if existing regulations are changed or new regulations are adopted. For example, the FDA clearance or approval process can take longer than anticipated due to requests for additional clinical data and changes in regulatory requirements. A failure or delay in obtaining necessary regulatory clearances or approvals would materially adversely affect our business, financial condition, and results of operations.

Although we have obtained regulatory clearance for our products in the U.S. and certain non-U.S. jurisdictions, they will remain subject to extensive regulatory scrutiny.

Although our products have obtained regulatory clearance in the U.S. and certain non-U.S. jurisdictions, they will be subject to ongoing regulatory requirements for manufacturing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping, conduct of post-marketing studies, and submission of safety, effectiveness, and other post-market information, including both federal and state requirements in the U.S. and requirements of comparable non-U.S. regulatory authorities.

Our manufacturing facility is required to comply with extensive requirements imposed by the FDA and comparable foreign regulatory authorities, including ensuring that quality control and manufacturing procedures conform to the QSR or similar regulations set by foreign regulatory authorities. Following our voluntary recalls and given our Audit Committee findings, we have a heightened potential for an FDA inspection. As such, we will be subject to continual review and inspections to assess compliance with the QSR and adherence to commitments made in any 510(k) application. Accordingly, we continue to expend time, money, and effort in all areas of regulatory compliance, including manufacturing, production and quality control.

Any regulatory clearances or approvals that we have received for our products will be subject to limitations on the cleared or approved indicated uses for which the product may be marketed and promoted or to the conditions of approval or contain requirements for potentially costly post-marketing testing. We are required to report certain adverse events and production problems, if any, to the FDA and comparable foreign regulatory authorities. Any new legislation addressing product safety issues could result in increased costs to assure compliance. The FDA and other agencies, including the DOJ, closely regulate and monitor the post-clearance or approval marketing and promotion of products to ensure that they are marketed and distributed only for the cleared or approved indications and in accordance with the provisions of the cleared or approved labeling.

Promotional communications with respect to devices are subject to a variety of legal and regulatory restrictions and must be consistent with the information in the product’sproduct’s cleared or approved labeling. As such, we may not promote our products for indications or uses for which they do not have clearance or approval. However, physicians can use their independent and professional judgment and use our products for off-label purposes, as FDA regulations do not restrict a physician’s choice of treatment with the practice of medicine. Prior to making certain changes to a cleared product, including certain changes to product labeling, the holder of a cleared 510(k) application may be required to submit a new premarket application and obtain clearance or approval.

-37-

If a regulatory agency discovers previously unknown problems with our products, such as adverse events of unanticipated severity or frequency, or problems with our facility where the product is manufactured, or disagrees with the promotion, marketing or labeling of our products, such regulatory agency or enforcement authority may impose restrictions on that product or us, including requiring withdrawal of the product from the market. In addition to this type of penalty for failing to comply with applicable regulatory requirements, a regulatory agency or enforcement authority may, among other things:

-34-

In addition, violations of the Federal Food, Drug, and Cosmetic Act, or FDCA, relating to the promotion of approved products may lead to investigations alleging violations of federal and state healthcare fraud and abuse and other laws, as well as state consumer protection laws. As disclosed previously, we settled a DOJ civil False Claims Act investigation concerning, among other things, whether we marketed and promoted DABRA devices for unapproved uses that were not covered by federal healthcare programs.

Any government adverse finding, regulatory sanction or investigation of alleged violations of law could require us to expend significant time and resources in response and could generate negative publicity. Any failure to comply with ongoing regulatory requirements may significantly and adversely affect our ability to commercialize and generate revenue from our products. If regulatory sanctions are applied or if regulatory clearance or approval is withdrawn, it would have a material adverse effect on our business, financial condition, and results of operations.

Our products may be subject to additional recalls, revocations or suspensions after receiving FDA or foreign approval or clearance, which could divert managerial and financial resources, harm our reputation, and adversely affect our business.

The FDA and similar foreign governmental authorities have the authority to order the recall of our products because of any failure to comply with applicable laws and regulations, or defects in design or manufacture. A government mandated or voluntary product recall by us could occur because of, for example, component failures, device malfunctions, or other adverse events, such as serious injuries or deaths, or quality-related issues such as manufacturing errors or design or labeling defects.

For example, we have conducted four recent recalls related to our DABRA product. In September 2019, we initiated a voluntary recall of our DABRA catheters to replace 12-month shelf life labeled catheters with two-month shelf life labeled catheters, which we believe will significantly reduce the number of catheters that fail to calibrate. We submitted a request for termination to the FDA in February 2020, and as of July 2020, 98% of the affected product has been returned to us. A voluntary recall of DABRA lasers was initiated in January 2020 to correct a software issue that could result in user or patient injury or may adversely impact laser performance. This recall was classified as a Class II recall by the FDA. The FDA terminated this recall on

-38-

November 1, 2021. In addition, in July 2020, we initiated a voluntary recall of our DABRA lasers to replace the wheels with lower profile wheels that were cleared by the FDA in the DABRA 510(k). We formally notified the FDA of this recall in accordance with applicable law. This field correction was completed in March 2021. The Company considers this recall complete and submitted to the FDA a final status report in March 2021 requesting termination of this field correction. In October 2020 we initiated a voluntary recall of our DABRA lasers to replace the footswitch with a footswitch that meets specification for protection from ingress of solids or liquids. We formally notified the FDA of this recall in accordance with applicable law. This recall was classified as a Class II recall by the FDA. This field correction was completed in October 2021. The Company considers this recall complete and submitted to the FDA a final status report in October 2021 requesting termination of this field correction. correction. Any government-mandated recall or additional voluntary recall by us could occur as a result of component failures, manufacturing errors, design or labeling defects or other issues. These voluntary recalls and any future recalls of our products could divert managerial and financial resources, harm our reputation and adversely affect our business.

In addition, the FDA conducted an unannounced facility inspection in December 2019. The FDA issued to us a Form 483 that included observations that schedules for the adjustment, cleaning, and other maintenance of equipment have not been adequately established, a device master record index was not current, and document control procedures have not been fully established. We responded to the FDA with the corrective measures we are taking and to address the issued identified

-35-

in the Form 483 and based on this information, the FDA issued to us an Establishment Inspection Report, or EIR, closing out the inspection. All actions are complete, and the final Form 483 report was sent to the FDA on September 25, 2020.

Also, we have been engaged in additional shelf life testing at the FDA’s request as part of a special 510(k). Due to recent variations noted in the shelf life of the catheter during our testing procedures, we have paused commercial sales of DABRA catheters not being used for the atherectomy clinical trial. We submitted additional test data in March 2021 related to the DABRA catheter shelf life in a traditional 510(k), which was cleared by the FDA in July 2021.

Depending on the corrective action we take to address a product’s deficiencies or defects, the FDA may require, or we may voluntarily decide, that we will need to seek and obtain new approvals or clearances for the device before we may market or distribute the corrected device. Seeking such approvals or clearances may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including adverse inspection findings, FDA warning letters, product seizure, injunctions, administrative penalties, or civil or criminal fines. We may also be required to bear other costs or take other actions that may have a negative impact on our sales as well as face significant adverse publicity or regulatory consequences, which could harm our business, including our ability to market our products in the future.

As part of our investigation into the DABRA device performance, we conducted an internal audit of the clinical study that was used to support the device’s 510(k) application. The audit consisted of review of clinical study documentation that was retained by the study sponsor and found adequate evidence to support the safety and efficacy reported in the clinical study report submitted with the 510(k) application. The other observations identified by the audit were found to not have a major impact on the reported results of the study. If FDA were to disagree with the outcome of the audit and take the position that the issues with the clinical trial were reportable to the FDA, we could be required to issue a safety alert to our customers or initiate a recall, we could incur product liability and other costs, product clearances or approvals could be delayed, suspended or revoked, enforcement action could be initiated by regulatory authorities, we could be required to cease commercialization of DABRA and our business could otherwise be adversely affected.

In addition, we are subject to medical device reporting regulations that require us to report to the FDA or similar foreign governmental authorities if one of our products may have caused or contributed to a death or serious injury or if we become aware that it has malfunctioned in a way that would be likely to cause or

-39-

contribute to a death or serious injury if the malfunction recurred. After a May 2018 inspection, the FDA issued to us a Form 483 that included observations for failure to properly evaluate whether certain complaints related to DABRA that we have received rose to a level required to be reported to the FDA. At that time, in response, we informed the FDA that we have modified our complaint review procedures and we completed a retrospective evaluation and have not found any complaints which require a submission to the FDA. We have not requested, and the FDA has not issued, an EIR related to this inspection. In connection with our Audit Committee investigation, the Audit Committee also found failures to properly identify reportable events or to file timely reports, as well as failure to address each of the May 2018 observations to FDA’sFDA’s satisfaction. Although we have since identified and made the appropriate reports to the FDA, these prior failures can subject us to sanctions and penalties, including warning letters and recalls. Physicians, hospitals and other healthcare providers may make similar reports to regulatory authorities. Any such reports may trigger an investigation by the FDA or similar foreign regulatory bodies, which could divert managerial and financial resources, harm our reputation and have a material adverse effect on our business, financial condition, and results of operations.

Material modifications to our devices may require new 510(k) clearances or premarket approvals or may require us to recall or cease marketing our devices until clearances or approvals are obtained.

Material modifications to the intended use or technological characteristics of our devices will require new 510(k) clearances or premarket approvals or require us to recall or cease marketing the modified devices until these clearances or approvals are obtained. Based on FDA published guidelines, the FDA requires device manufacturers to initially make and document a determination of whether or not a modification requires a new approval, supplement, or clearance; however, the FDA can review a manufacturer’s decision. Any modification to an FDA-cleared device that would significantly affect its safety or efficacy or that would constitute a major change in its intended use would constitute a material modification and would require a new 510(k) clearance or possibly a premarket approval. If required, we may not be able to obtain additional 510(k) clearances or premarket approvals for new devices or for modifications to, or additional indications for,

-36-

our devices in a timely fashion, or at all. Delays in obtaining required future clearances would harm our ability to introduce new or enhanced devices in a timely manner, which in turn would harm our future growth. We have made modifications to our devices in the past and will make additional modifications in the future that we believe do not or will not require additional clearances or approvals. If the FDA disagrees and requires new clearances or approvals for the modifications, we may be required to recall and to stop selling or marketing our devices as modified, which could harm our operating results and require us to redesign our platform devices. In these circumstances, we may also be subject to significant enforcement actions such as significant regulatory fines or penalties. Furthermore, the FDA’s ongoing review of the 510(k) program may make it more difficult for us to modify our previously cleared products, either by imposing stricter requirements on when a new 510(k) for a modification to a previously cleared product must be submitted or applying more onerous review criteria to such submissions.

-37-

If we or our suppliers fail to comply with the FDA’s Quality System Regulation or any applicable state equivalent, our operations could be interrupted, and our potential product sales and operating results could suffer.

We and our suppliers are required to comply with the FDA’sFDA’s QSR, which delineates, among other things, the design controls, document controls, purchasing controls, identification and traceability, production and process controls, acceptance activities, nonconforming product requirements, corrective and preventive action requirements, labeling and packaging controls, handling, storage, distribution and installation requirements, complaint handling, records requirements, servicing requirements, and statistical techniques potentially applicable to the production of our medical devices. We and our suppliers are also subject to the regulations of foreign jurisdictions regarding the manufacturing process if we market products overseas. The FDA enforces the QSR through periodic and announced or unannounced inspections of manufacturing facilities. Our facilities havefacility has been inspected by the FDA and other regulatory authorities, and we anticipate that we and certain of our third-party component suppliers will be subject to additional future inspections. If our facilitiesfacility or manufacturing processes or our suppliers’ facilities or manufacturing processes are found to be in non-compliance or fail to take

-40-

satisfactory corrective action in response to adverse QSR inspectional findings, the FDA could take legal or regulatory enforcement actions against us and/or our products, including but not limited to the cessation of sales or the initiation of a recall of distributed products, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’customers’ demands. We may also be required to bear other costs or take other actions that may have a negative impact on our future sales and our ability to generate profits.

Current regulations depend heavily on administrative interpretation. If the FDA does not believe that we are in compliance with applicable FDA regulations, the agency could take legal or regulatory enforcement actions against us and/or our products. We are also subject to periodic inspections by the FDA, other governmental regulatory agencies, as well as certain third-party regulatory groups. Future interpretations made by the FDA or other regulatory bodies made during the course of these inspections may vary from current interpretations and may adversely affect our business and prospects. The FDA’sFDA’s and other comparable non-U.S. regulatory agencies’agencies’ statutes, regulations, or policies may change, and additional government regulation or statutes may be enacted, which could increase post-approval regulatory requirements, or delay, suspend, prevent marketing of any cleared or approved products or necessitate the recall of distributed products. We cannot predict the likelihood, nature or extent of adverse governmental regulation that might arise from future legislative or administrative action, either in the U.S. or abroad.

The medical device industry has been under heightened FDA scrutiny as the subject of government investigations and enforcement actions. If our operations and activities are found to be in violation of any FDA laws or any other governmental regulations that apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines and other legal and/or agency enforcement actions. Any penalties, damages, fines, or curtailment or restructuring of our operations or activities could adversely affect our ability to operate our business and our financial results. The risk of us being found in violation of FDA laws is increased by the fact that many of these laws are broad and their provisions are open to a variety of interpretations. Any action against us for violation of these laws, even if we successfully defend ourselves against that action and its underlying allegations, could cause us to incur significant legal expenses and divert management’smanagement’s attention from the operation of our business. Where there is a dispute with a federal or state governmental agency that cannot be resolved to the mutual satisfaction of all relevant parties, we may determine that the costs, both real and contingent, are not justified by the commercial returns to us from maintaining the dispute or the product.

Various claims, design features or performance characteristics of our medical devices, that we regarded as permitted by the FDA without new marketing clearance or approval, may be challenged by the FDA or state or foreign regulators. The FDA or state or foreign regulatory authorities may find that certain claims, design features or performance characteristics, in order to be made or included in the products, may have to be supported by further clinical studies and marketing clearances or approvals, which could be lengthy, costly and possibly unobtainable.

If any of our products cause or contribute to a death or a serious injury, or malfunction in certain ways, we will be required to report under applicable medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions.

Under the FDA medical device reporting regulations, or MDR regulations, medical device manufacturers are required to report to the FDA information that a device has or may have caused or contributed to a death or serious injury

-38-

or has malfunctioned in a way that would likely cause or contribute to death or serious injury if the malfunction of the device or one of our similar devices were to recur. For example, for DABRA, the most frequent complication reported to us as a result of post-market surveillance is clinically non-significant vessel perforation. In connection with an internal audit of our regulatory reporting systems and our Audit Committee investigation, we have revised and continue to monitor our internal operating procedures for complaint handling

-41-

and adverse event classifications. We reviewed all adverse medical events that were reported to us prior to and during the Audit Committee investigation and retrospectively filed three MDRs with the FDA.

If we fail to report events required to be reported to the FDA within the required timeframes, or at all, the FDA could take enforcement action against us. Any such adverse event involving our products also could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection or enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require our time and capital, distract management from operating our business, and may harm our reputation and have a material adverse effect on our business, financial condition, and results of operations.

Healthcare reform initiatives and other administrative and legislative proposals may adversely affect our business, financial condition, results of operations and cash flows in our key markets.

There have been and continue to be proposals by the federal government, state governments, regulators and third-party payors to control or manage the increasing costs of healthcare and, more generally, to reform the U.S. healthcare system. Certain of these proposals could limit the prices we are able to charge for our products or the coverage and reimbursement available for our products and could limit the acceptance and availability of our products on the market. The adoption of proposals to control costs could have a material adverse effect on our business, financial condition, and results of operations.

For example, in the U.S., in March 2010, the PPACA was passed. The PPACA was intended to make significant changes to the way healthcare is financed by both federal and state governments and private insurers, with direct impacts to the medical device industry. Among other provisions, the PPACA imposed, with limited exceptions, a deductible excise tax of 2.3% on sales of medical devices by entities, including us, that manufacture or import certain medical devices offered for sale in the U.S., including many of our products. The Consolidated Appropriations Act, 2016 (Pub. L. 114-113), signed into law in December 2015, included a two-year moratorium on the medical device excise tax. A second two-year moratorium on the medical device excise tax was signed into law in January 2018 as part of the Extension of Continuing Appropriations Act, 2018 (Pub. L. 115-120), extending the moratorium through December 31, 2019. On December 20, 2019, President Trump signed into law a permanent repeal of the medical device tax under the PPACA, but there is no guarantee that Congress or the President will not reverse course in the future. If such an excise tax on sales of certain of our products in the U.S. is enacted, it could have a material adverse effect on our business, financial condition, and results of operations.

In addition, the PPACA and the Medicare Access and CHIP Reauthorization Act of 2015 substantially changed the way healthcare is delivered and financed by both governmental and private insurers. These changes included the creation of demonstration programs and other value-based purchasing initiatives that provide financial incentives for physicians and hospitals to reduce costs, including incentives for furnishing low-cost therapies for chronic wounds even if those therapies are less effective than our products. Under the Trump Administration, there were ongoing efforts to modify or repeal all or part of PPACA or take executive action that affects its implementation. Tax reform legislation was passed that includes provisions that impact healthcare insurance coverage and payment such as the elimination of the tax penalty for individuals who do not maintain health insurance coverage (the so-called “individual mandate”). Such actions or similar actions could have a negative effect on the utilization of our products. On December 18, 2019, the U.S. Court of Appeals for the Fifth Circuit upheld a lower court’s determination in Texas v. Azar, 4:18-cv-00167, that the individual mandate was unconstitutional and remanded the case to the lower court for further analysis as to whether PPACA as a whole is unconstitutional because the individual mandate is not severable from other provisions of the law. In June 2021, the United States Supreme Court upheld the PPACA when it dismissed a legal challenge to the ACA’s constitutionality. Further, legislative and regulatory changes under the PPACA remain possible, although the new federal administration under President Biden has signaled that it plans to build on the PPACA and expand the number of people who are eligible for health insurance under it. It is unclear how the Supreme Court decision,

-42-

future litigation and healthcare measures

-39-

promulgated by the Biden administration will impact the implementation of the PPACA and our business, financial condition and results of operations. Complying with any new legislation or reversing changes implemented under the PPACA could be time-intensive and expensive, resulting in a material adverse effect on our business.

Other healthcare reform legislative changes have also been proposed and adopted in the U.S. since the PPACA was enacted. In August 2011, the Budget Control Act of 2011, among other things, led to aggregate reductions of Medicare payments to providers of 2% per fiscal year. These reductions went into effect in April 2013, which, due to subsequent legislative amendments, will stay in effect through 2030, with the exception of a temporary suspension implemented under various COVID-19 relief legislation from May 1, 2020 through June 30, 2022 (the sequestration cut will be reduced to 1% from April 1, 2022, to June 30, 2022, unless additional congressional action is taken.taken). In January 2013, the American Taxpayer Relief Act of 2012 was signed into law, which, among other things, further reduced Medicare payments to several types of providers, including hospitals, imaging centers and cancer treatment centers, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

Further, recently there has been heightened governmental scrutiny over the manner in which manufacturers set prices for their marketed products, which has resulted in several U.S. Congressional inquiries and proposed and enacted federal legislation designed to bring transparency to product pricing and reduce the cost of products and services under government healthcare programs. As a result of reform of the U.S. healthcare system, changes in reimbursement policies or healthcare cost containment initiatives may limit or restrict coverage and reimbursement for procedures using our products and cause our revenue to decline. Additionally, individual states in the U.S. have also become increasingly active in passing legislation and implementing regulations designed to control product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures. Moreover, Medicare, regional healthcare authorities and individual hospitals are increasingly using bidding procedures to determine what products to purchase, and which suppliers will be included in their healthcare programs. Adoption of price controls and other cost-containment measures, and adoption of more restrictive policies in jurisdictions with existing controls and measures may prevent or limit our ability to generate revenue, attain profitability.

Various new healthcare reform proposals are emerging at the federal and state level. Any new federal and state healthcare initiatives that may be adopted could limit the amounts that federal and state governments will pay for healthcare products and services and could have a material adverse effect on our business, financial condition, and results of operations.

Healthcare cost containment pressures and legislative or administrative reforms resulting in restrictive coverage and reimbursement practices of third-party payors could decrease the demand for our products and the number of procedures performed using our devices, which could have an adverse effect on our business.

Our products are purchased principally by physician office-based labs, which typically bill various third-party payors, including governmental programs, such as Medicare and Medicaid, private insurance plans and managed care plans, for the healthcare services provided to their patients. The ability of our customers to obtain reimbursement for procedures that are performed using our products from government and private third-party payors is critical to our success. The availability of coverage and reimbursement for procedures performed using our products affects which products customers purchase and the prices they are able to pay to us.

Reimbursement can vary based on geographical location, type of provider/customer, and third-party payor and can significantly influence the acceptance of new products and services. Third-party payors may view some procedures performed using our products as experimental and may not provide coverage. Third-party payors may not cover and reimburse our customers for certain procedures performed using our products in whole or in part in the future, or payment rates may decline and not be adequate, or both. Further, coverage and reimbursement by third-party payors to our customers is also related to billing codes to describe procedures performed using our

-43-

products. Hospitals and physicians use several billing codes to bill for such procedures. Third-party payors may not continue to recognize the current procedural technology, or CPT, codes available for use by our customers. The CPT codes may change undermining our customer’scustomer’s ability to use those codes and reimbursement may be interrupted. Furthermore, some payors may not accept these new or revised codes for payment. If payors do not cover atherectomy, physicians may not perform as many DABRA treatments

-40-

as they otherwise would perform. Consequently, we may not be able to sell as many catheters for DABRA treatments as projected.

Reimbursement rates are unpredictable, and we cannot project how our business may be affected by future legislative and regulatory developments. Future legislation or regulation, or changing payment methodologies, may have a material adverse effect on our business, financial condition, and results of operations, and reimbursement may not be adequate for all customers. From time to time, typically on an annual basis, payment amounts are updated and revised by third-party payors. Because the cost of our products generally is recovered by the healthcare provider as part of the payment for performing a procedure and not separately reimbursed, these updates, especially lower payments could directly impact the demand for our products. For example, in July 2013, the Centers for Medicare and Medicaid Services, or CMS, proposed reimbursement changes that would have decreased reimbursement for procedures in an outpatient-based facility, such as a catheterization lab. Although CMS chose not to implement those changes in 2013, we cannot assure you that CMS will not take similar actions in the future.

After we develop new products or seek to market our products for new approved or cleared indications, we may find limited demand for the product unless government and private third-party payors provide adequate coverage and reimbursement to our customers. Obtaining codes and reimbursement for new products may require an extended, multi-year effort. Even with reimbursement approval and coverage by government and private payors, providers submitting reimbursement claims for new products or existing products with new approved or cleared indications may face delay in payment if there is confusion by providers or payors regarding the appropriate codes to use in seeking reimbursement. Such delays may create an unfavorable impression within the marketplace regarding the level of reimbursement or coverage available for our products.

Demand for our products or new approved indications for our existing products may fluctuate over time if federal or state legislative or administrative policy changes affect coverage or reimbursement levels for our products, or the services related to our products. In the U.S., there have been, and we expect there will continue to be, legislative and regulatory proposals to change the healthcare system, such as the potential repeal of the PPACA, some of which could significantly affect our business. It is uncertain what impact the current U.S. presidential administration will have on healthcare spending. If enacted and implemented, any measures to restrict healthcare spending could result in decreased revenue from the sale of our products and decreased potential returns from our research and development initiatives. Other legislative or administrative reforms to the U.S. or international reimbursement systems in a manner that significantly reduces reimbursement for procedures performed using our products or denies coverage for those procedures could have a material adverse effect on our business, financial condition, and results of operations.

Our sales into foreign markets expose us to risks associated with international sales and operations.

We have historically sold into foreign markets and plan to continue to do so when we re-commercialize DABRA. Conducting international operations subjects us to risks that could be different than those faced by us in the U.S. The sale and shipment of our products across international borders, as well as the purchase of components and products from international sources, subject us to extensive U.S. and foreign governmental trade, import and export and customs regulations and laws, including, but not limited to, the Export Administration Regulations and trade sanctions against embargoed countries, which are administered by the Office of Foreign Assets Control within the Department of the Treasury, as well as the laws and regulations administered by the Department of Commerce. These regulations limit our ability to market, sell, distribute or otherwise transfer our products or technology to prohibited countries or persons.

-44-

Compliance with these regulations and laws is costly, and failure to comply with applicable legal and regulatory obligations could adversely affect us in a variety of ways that include, but are not limited to, significant criminal, civil and administrative penalties, including imprisonment of individuals, fines and penalties, denial of export privileges, seizure of shipments and restrictions on certain business activities. Also, the failure to comply with applicable legal and regulatory obligations could result in the disruption of our distribution and sales activities.

These risks may limit or disrupt our expansion, restrict the movement of funds or result in the deprivation of contractual rights or the taking of property by nationalization or expropriation without fair compensation. Operating in international markets also requires significant management attention and financial resources.

-41-

Our employees, independent contractors, consultants, commercial partners, distributors, and vendors may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, consultants, commercial partners, distributors, and vendors and other individuals or entities with whom we have arrangements may engage in fraudulent or illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or disclosure of unauthorized activities to us that violates: (i) the laws of the FDA and other similar foreign regulatory bodies, including those laws requiring the reporting of true, complete and accurate information to such regulators; (ii) manufacturing standards; (iii) healthcare fraud and abuse laws in the U.S. and similar foreign fraudulent misconduct laws; or (iv) laws that require the true, complete and accurate reporting of financial information or data. These laws may impact, among other things, future sales, marketing, and education programs. In particular, the promotion, sales and marketing of healthcare items and services, as well as certain business arrangements in the healthcare industry, are subject to extensive laws designed to prevent fraud, waste, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, structuring and commissions, certain customer incentive programs and other business arrangements generally. Activities subject to these laws also involve the improper use of information obtained in the course of patient recruitment for clinical trials.

We have adopted a code of ethics and business conduct, but it is not always possible to identify and deter misconduct by our employees and other third parties, and the precautions we take to detect and prevent these activities may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. For example, the Audit Committee investigation identified certain behavior inconsistent with the Company’s Code of Ethics and Conduct and related policies. In addition, as discussed above, we entered into to a Settlement Agreement with the DOJ to resolve a civil investigation and related civil action, and in connection with the Settlement Agreement, entered into a 5-year Corporate Integrity Agreement with the OIG. We have incurred, and will continue to incur, costs related to compliance under, and payments made pursuant to, the Settlement Agreement and Corporate Integrity Agreement. These expenses and the diversion of the attention of the management team that has occurred, and is expected to continue, has adversely affected, and could continue to adversely affect, our business, financial condition, and results of operations. If such actions are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could result in government investigations, civil and criminal proceedings, the imposition of significant fines or other sanctions, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, additional integrity reporting and oversight obligations, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings and curtailment of operations, any of which could adversely affect our ability to operate our business and our results of operations. In the future, whether or not we are successful in defending against such further actions or investigations, we could incur substantial costs, including legal fees, and divert the attention of management in defending ourselves against any of these claims or investigations, which could have a material adverse effect on our business, financial condition, and results of operations.

-45-

Environmental and health safety laws may result in liabilities, expenses and restrictions on our operations.

Federal, state, local and foreign laws regarding environmental protection, hazardous substances and human health and safety may adversely affect our business. Using hazardous substances in our operations exposes us to the risk of accidental injury, contamination or other liability from the use, storage, importation, handling, or disposal of hazardous materials. If our or our suppliers’suppliers’ operations result in the contamination of the environment or expose individuals to hazardous substances, we could be liable for damages and fines, and any liability could significantly exceed our insurance coverage and have a material adverse effect on our on our business, financial condition, and results of operations. Future changes to environmental and health and safety laws could cause us to incur additional expenses or restrict our operations, which could have a material adverse effect on our business, financial condition, and results of operations.

Our operations and relationships with customers and third-party payors are subject to applicable anti-kickback, fraud and abuse and other healthcare laws and regulations, which could expose us to penalties including criminal sanctions, civil penalties, contractual damages, reputational harm and diminished profits and future earnings.

-42-

Healthcare providers and third-party payors play a primary role in the recommendation of our cleared devices and any future cleared or approved devices. Our current and future arrangements with providers, third-party payors and customers may be materially limited because of broadly applicable fraud and abuse and other healthcare laws and regulations. The business or financial arrangements and relationships through which we market, sell and distribute our cleared devices could also be constrained.

Restrictions under applicable U.S. federal and state healthcare laws and regulations may include the following:

occurs, it could adversely affect our ability to operate our business and our results of operations. If any of the physicians or other healthcare providers or entities with whom we expect to do business is found to be not in compliance with applicable laws, they may be subject to criminal, civil or administrative sanctions, including exclusions from government-funded healthcare programs, which could have a material adverse effect on our business, financial condition, and results of operations.

If a breach of our measures protecting personal data covered by HIPAA, the HITECH Act, or the CCPA occurs, we may incur significant liabilities.

HIPAA, as amended by the HITECH Act, and the regulations that have been issued under it, impose certain obligations, including mandatory contractual terms, with respect to safeguarding the privacy, security and transmission of protected health information. The requirements and restrictions apply to “covered entities” (which include health care providers and insurers) as well as to their business associates that receive protected health information from them in order to provide services to or perform certain activities on their behalf. The statute and regulations also impose notification obligations on covered entities and their business associates in the event of a breach of the privacy or security of protected health information. We occasionally receive protected health information from our customers in the course of our business. As such, we believe that we are business associates and therefore subject to HIPAA’s requirements and restrictions with respect to handling such protected health information and have executed business associate agreements with certain customers.

In addition, California has enacted the California Consumer Privacy Act, or CCPA, which came into effect on January 1, 2020. Pursuant to the CCPA, certain businesses are required, among other things, to make certain enhanced disclosures related to California residents regarding the use or disclosure of their personal information, allow California residents to opt-out of certain uses and disclosures of their personal information without penalty, provide Californians with other choices related to personal data in our possession, and obtain opt-in consent before engaging in certain uses of personal information relating to Californians under the age of 16. The California Attorney General may seek substantial monetary penalties and injunctive relief in the event of our non-compliance with the CCPA. The CCPA also allows for

-44-

private lawsuits from Californians in the event of certain data breaches. Aspects of the CCPA remain uncertain, and we may be required to make modifications to our policies or practices in order to comply.

It is possible the data protection laws may be interpreted and applied in a manner that is inconsistent with our practices. If so, this could result in government-imposed fines or orders requiring that we change our practices, which could adversely affect our business. In addition, these privacy regulations may differ from country to country and state to state and may vary based on whether testing is performed in the U.S. or in the local country. Complying with these various laws and regulations could cause us to incur substantial costs or require us to change our business practices and compliance procedures in a manner adverse to our business. Further, compliance with data protection laws and regulations could require us to take on more onerous obligations in our contracts, restrict our ability to collect, use and disclose data, or in some cases, impact our ability to operate in certain jurisdictions. We can provide no assurance that we are or will remain in compliance with diverse privacy and security requirements in all of the jurisdictions in which we do business. If we fail to comply or are deemed to have failed to comply with applicable privacy protection laws and regulations such failure could result in government enforcement actions and create liability for us, which could include substantial civil and/or criminal penalties, as well as private litigation and/or adverse publicity that could negatively affect our operating results and business.

-48-

Risks Related to our Intellectual Property

If we are unable to obtain and maintain patent protection for our products, our competitors could develop and commercialize products and technology similar or identical to ours, and our ability to successfully commercialize our existing products and any products we may develop, and our technology may be adversely affected.

As with other medical device companies, our ability to maintain and solidify a proprietary position for our products will depend upon our success in obtaining effective patent claims that cover such products, their manufacturing processes and their intended methods of use, and enforcing those claims once granted. Furthermore, in some cases, we may not be able to obtain issued claims covering DABRA, as well as other technologies that are important to our business, which are sufficient to prevent third parties, such as our competitors, from utilizing our technology. Any failure to obtain or maintain patent protection with respect to DABRA could have a material adverse effect on our business, financial condition, and results of operations.

Changes in either the patent laws or their interpretation in the U.S. and other countries may diminish our ability to protect our inventions, obtain, maintain, and enforce our intellectual property rights and, more generally, could affect the value of our intellectual property or narrow the scope of our issued patents. Additionally, we cannot predict whether the patent applications we are currently pursuing will issue as patents in any particular jurisdiction or whether the claims of any issued patents will provide sufficient protection from competitors or other third parties.

The patent prosecution process is expensive, time-consuming, and complex, and we may not be able to file, prosecute, maintain, enforce, or license all necessary or desirable patent applications at a reasonable cost or in a timely manner. It is also possible that we will fail to identify patentable aspects of our research and development output in time to obtain patent protection. Although we enter into non-disclosure and confidentiality agreements with parties who have access to confidential or patentable aspects of our research and development output, such as our employees, corporate collaborators, outside scientific collaborators, suppliers, consultants, advisors and other third parties, any of these parties may breach the agreements and disclose such output before a patent application is filed, thereby jeopardizing our ability to seek patent protection. In addition, our ability to obtain and maintain valid and enforceable patents depends on whether the differences between our inventions and the prior art allow our inventions to be patentable over the prior art. Furthermore, publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the U.S. and other jurisdictions are typically not published until 18 months after filing, or in some cases not at all. Therefore, we cannot be certain that we were the first to make the inventions claimed in any of our pending patent applications, or that we were the first to file for patent protection of such inventions. Moreover, in some circumstances, we may not have the right to control the preparation, filing and prosecution of patent applications, or to maintain the patents, covering technology that we license from or license to third parties and are therefore reliant on our licensors or licensees. Therefore, these and any of our patents and applications may not be prosecuted and enforced in a manner consistent with the best interests of our business. Defects of form in the preparation or filing of our patents or patent applications may exist, or may arise in the

-45-

future, for example, with respect to proper priority claims, inventorship, and the like, although we are unaware of any such defects that we believe are of material importance. If we or any future licensors or licensees, fail to establish, maintain or protect such patents and other intellectual property rights, such rights may be reduced or eliminated. If any future licensors or licensees are not fully cooperative or disagree with us as to the prosecution, maintenance or enforcement of any patent rights, such patent rights could be compromised. If there are material defects in the form, preparation or prosecution of our patents or patent applications, such patents or applications may be invalid and unenforceable. Any of these outcomes could impair our ability to prevent competition from third parties, which may have an adverse impact on our business.

In addition, if any patents are issued in the future, they may not provide us with any competitive advantages, or may be successfully challenged by third parties. Agreement terms that address non-competition are difficult to enforce in many jurisdictions and may not be enforceable in any particular case. To the extent that our

-49-

intellectual property and other proprietary rights are not adequately protected, third parties might gain access to our proprietary information, develop and market products or services similar to ours, or use trademarks similar to ours, each of which could materially harm our business. Existing U.S. federal and state intellectual property laws offer only limited protection. Moreover, the laws of other countries in which we now, or may in the future, conduct operations or contract for services may afford little or no effective protection of our intellectual property. The failure to adequately protect our intellectual property and other proprietary rights could materially harm our business.

The strength of patent rights involves complex legal and scientific questions and can be uncertain. This uncertainty includes changes to the patent laws through either legislative action to change statutory patent law or court action that may reinterpret existing law or rules in ways affecting the scope or validity of issued patents. The patent applications that we own may fail to result in issued patents in theU.S. or foreign countries with claims that cover our products or services. Even if patents do successfully issue from the patent applications that we own, third parties may challenge the validity, enforceability or scope of such patents, which may result in such patents being narrowed, invalidated or held unenforceable. Any successful challenge to our patents could deprive us of exclusive rights necessary for the successful commercialization of our products and services. Furthermore, even if they are unchallenged, our patents may not adequately protect our products and services, provide exclusivity for our products and services, or prevent others from designing around our claims. If the breadth or strength of protection provided by the patents we hold or pursue with respect to our products and services is challenged, it could dissuade companies from collaborating with us to develop, or threaten our ability to commercialize, our products and services.

Patents have a limited lifespan. In the U.S., the natural expiration of a utility patent is generally 20 years after its effective filing date and the natural expiration of a design patent is generally 14 years after its issue date, unless the filing date occurred on or after May 13, 2015, in which case the natural expiration of a design patent is generally 15 years after its issue date. Various extensions may be available; however, the life of a patent, and the protection it affords, is limited. Without patent protection for our products and services, we may be open to competition. Further, if we encounter delays in our development efforts, the period of time during which we could market our products and services under patent protection would be reduced.

In addition to the protection afforded by patents, we also rely on trade secret protection to protect proprietary know-how that may not be patentable or that we elect not to patent, processes for which patents may be difficult to obtain or enforce, and any other elements of our products and services that involve proprietary know-how, information or technology that is not covered by patents. However, trade secrets can be difficult to protect. If the steps taken to maintain our trade secrets are deemed inadequate, we may have insufficient recourse against third parties for misappropriating any trade secrets. Misappropriation or unauthorized disclosure of our trade secrets could significantly affect our competitive position and may have a material adverse effect on our business. Furthermore, trade secret protection does not prevent competitors from independently developing substantially equivalent.

If the scope of any patent protection we obtain is not sufficiently broad, or if we lose any of our patent protection, our ability to prevent our competitors from commercializing similar or identical technology and products would be adversely affected.

The patent position of medical device companies generally is highly uncertain, involves complex legal and factual questions, and has been the subject of much litigation in recent years. As a result, the issuance, scope, validity,

-46-

enforceability, and commercial value of our patent rights are highly uncertain. Our pending and future patent applications may not result in patents being issued which protect our products or which effectively prevent others from commercializing competitive technologies and products.

Moreover, the coverage claimed in a patent application can be significantly reduced before the patent is issued, and its scope can be reinterpreted after issuance. Even if patent applications we license or own currently

-50-

or in the future issue as patents, they may not issue in a form that will provide us with any meaningful protection, prevent competitors or other third parties from competing with us, or otherwise provide us with any competitive advantage. Any patents that we own may be challenged, narrowed, circumvented, or invalidated by third parties. Consequently, we do not know whether DABRA will be protectable or remain protected by valid and enforceable patents. Our competitors or other third parties may be able to circumvent our patents by developing similar or alternative technologies or products in a non-infringing manner which could materially adversely affect our business, financial condition, results of operations and prospects.

The issuance of a patent is not conclusive as to its inventorship, scope, validity, or enforceability, and our patents may be challenged in the courts or patent offices in the U.S. and abroad. We may be subject to a third-party preissuance submission of prior art to the U.S. Patent and Trademark Office, or USPTO, or become involved in opposition, derivation, revocation, reexamination, post-grant and inter partes review, or interference proceedings or other similar proceedings challenging our patent rights. An adverse determination in any such submission, proceeding or litigation could reduce the scope of, or invalidate or render unenforceable, our patent rights, allow third parties to commercialize our products and compete directly with us, without payment to us, or result in our inability to manufacture or commercialize products without infringing third-party patent rights. Moreover, we may have to participate in interference proceedings declared by the USPTO to determine priority of invention or in post-grant challenge proceedings, such as oppositions in a foreign patent office, that challenge our priority of invention or other features of patentability with respect to our patents and patent applications. Such challenges may result in loss of patent rights, loss of exclusivity, or in patent claims being narrowed, invalidated, or held unenforceable, which could limit our ability to stop others from using or commercializing similar or identical technology and products, or limit the duration of the patent protection of DABRA. Such proceedings also may result in substantial cost and require significant time from our scientists and management, even if the eventual outcome is favorable to us, which would have a material adverse effect on our business, financial condition, and results of operations.

Obtaining and maintaining our patent protection depends on compliance with various procedural measures, document submissions, fee payments and other requirements imposed by government patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

Periodic maintenance fees, renewal fees, annuity fees and various other government fees on patents and applications will be due to be paid to the USPTO and various government patent agencies outside of the U.S. over the lifetime of our patents and applications. The USPTO and various non-U.S. government agencies require compliance with several procedural, documentary, fee payment and other similar provisions during the patent application process. In some cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. There are situations, however, in which non-compliance can result in abandonment or lapse of the patent or patent application, resulting in a partial or complete loss of patent rights in the relevant jurisdiction. In such an event, potential competitors might be able to enter the market with similar or identical products or technology, which could have a material adverse effect on our business, financial condition, and results of operations.

We may not be able to protect our intellectual property and proprietary rights throughout the world.

Third parties may attempt to commercialize competitive products or services in foreign countries where we do not have any patents or patent applications where legal recourse may be limited. This may have a significant commercial impact on our foreign business operations.

Filing, prosecuting, and defending patents on our products in all countries throughout the world would be prohibitively expensive, and the laws of foreign countries may not protect our rights to the same extent as the laws of the U.S. Consequently, we may not be able to prevent third parties from practicing our inventions in all countries outside the U.S., or from selling or importing products made using our inventions in and into the U.S. or other jurisdictions. Competitors may use our technologies in jurisdictions where we have not obtained patent

-51-

protection to develop their own products and, further, may export otherwise infringing products to territories where we have patent protection, but

-47-

enforcement is not as strong as that in the U.S. These products may compete with our products, and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets, and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our intellectual property and proprietary rights generally. Proceedings to enforce our intellectual property and proprietary rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly, could put our patent applications at risk of not issuing, and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property and proprietary rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license.

Many countries have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, many countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of such patent. If we are forced to grant a license to third parties with respect to any patents relevant to our business, our competitive position may be impaired, and our business, financial condition, results of operations and prospects may be adversely affected.

Changes in U.S. patent law could diminish the value of patents in general, thereby impairing our ability to protect our products.

Changes in either the patent laws or interpretation of the patent laws in the U.S. could increase the uncertainties and costs surrounding the prosecution of patent applications and the enforcement or defense of issued patents. Assuming that other requirements for patentability are met, prior to March 2013, in the U.S., the first to invent the claimed invention was entitled to the patent, while outside the U.S., the first to file a patent application was entitled to the patent. After March 2013, under the Leahy-Smith America Invents Act, or the America Invents Act, enacted in September 2011, the U.S. transitioned to a first inventor to file system in which, assuming that other requirements for patentability are met, the first inventor to file a patent application will be entitled to the patent on an invention regardless of whether a third party was the first to invent the claimed invention. A third party that files a patent application in the USPTO after March 2013, but before us could therefore be awarded a patent covering an invention of ours even if we had made the invention before it was made by such third party. This will require us to be cognizant going forward of the time from invention to filing of a patent application. Since patent applications in the U.S. and most other countries are confidential for a period of time after filing or until issuance, we cannot be certain that we were the first to either (i) file any patent application related to our products or (ii) invent any of the inventions claimed in our patents or patent applications.

-48-

The America Invents Act also includes a number of significant changes that affect the way patent applications will be prosecuted and also may affect patent litigation. These include allowing third-party submission of prior art to the USPTO during patent prosecution and additional procedures to attack the validity of a patent by USPTO administered post-grant proceedings, including post-grant review, inter partes review, and derivation proceedings. Because of a lower evidentiary standard in USPTO proceedings compared to the evidentiary standard in U.S. federal courts necessary to invalidate a patent claim, a third party could potentially provide evidence in a USPTO proceeding sufficient for the USPTO to hold a claim invalid even though the same evidence would be insufficient to invalidate the claim if first presented in a district court action. Accordingly, a

-52-

third party may attempt to use the USPTO procedures to invalidate our patent claims that would not have been invalidated if first challenged by the third party as a defendant in a district court action. Therefore, the America Invents Act and its implementation couldincrease the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business, financial condition, and results of operations.

Issued patents covering our products could be found invalid or unenforceable if challenged in court or before administrative bodies in the U.S. or abroad.

If we initiated legal proceedings against a third party to enforce a patent covering our products, the defendant could counterclaim that such patent is invalid or unenforceable. In patent litigation in the U.S., defendant counterclaims alleging invalidity or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness, or non-enablement. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent withheld relevant information from the USPTO, or made a misleading statement, during prosecution. Third parties may raise claims challenging the validity or enforceability of our patents before administrative bodies in the U.S. or abroad, even outside the context of litigation. Such mechanisms include re-examination, post-grant review, inter partesreview,, interference proceedings, derivation proceedings, and equivalent proceedings in foreign jurisdictions (e.g., opposition proceedings). Such proceedings could result in the revocation of, cancellation of, or amendment to our patents in such a way that they no longer cover our products. The outcome following legal assertions of invalidity and unenforceability is unpredictable. With respect to the validity question, for example, we cannot be certain that there is no invalidating prior art, of which we and the patent examiner were unaware during prosecution. If a third party were to prevail on a legal assertion of invalidity or unenforceability, we would lose at least part, and perhaps all, of the patent protection on our products. Such a loss of patent protection would have a material adverse effect on our business, financial condition, and results of operations.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position would be harmed.

In addition to seeking patents for our products, we rely upon unpatented trade secrets, know-how and continuing technological innovation to develop and maintain a competitive position. We seek to protect our proprietary information, in part, through confidentiality agreements with our employees, collaborators, contractors, advisors, consultants, and other third parties, and invention assignment agreements with our employees. We also have agreements with some of our consultants that require them to assign to us any inventions created as a result of their working with us. The confidentiality agreements are designed to protect our proprietary information and, in the case of agreements or clauses requiring invention assignment, to grant us ownership of technologies that are developed through a relationship with a third party.

Despite these efforts, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive, and time-consuming, and the outcome is unpredictable. In addition, some courts inside and outside the U.S. are less willing or unwilling to protect trade secrets. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor or other third party, we would have no right to prevent them from using that technology or information to compete with us. If any of our trade secrets were to be disclosed to or independently developed by a competitor or other third party, our competitive position would be materially and adversely harmed. Furthermore, we expect these trade secrets, know-how and proprietary information to over time be disseminated within the industry through independent development, the publication of journal articles describing the methodology, and the movement of personnel from academic to industry scientific positions.

-49-

We also seek to preserve the integrity and confidentiality of our data and trade secrets by maintaining physical security of our premises and physical and electronic security of our information technology systems.

-53-

While we have confidence in these individuals, organizations and systems, agreements or security measures may be breached, and we may not have adequate remedies for any breach. In addition, our trade secrets may otherwise become known or be independently discovered by competitors. To the extent that our consultants, contractors or collaborators use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions, which could have a material adverse effect on our business, financial condition, and results of operations.

We may be subject to claims challenging the inventorship of our patents and other intellectual property.

We may be subject to claims that former employees, collaborators or other third parties have an interest in our patents, trade secrets, or other intellectual property as an inventor or co-inventor. For example, we may have inventorship disputes arise from conflicting obligations of employees, consultants or others who are involved in developing our products. Litigation may be necessary to defend against these and other claims challenging inventorship or our patents, trade secrets or other intellectual property. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, intellectual property that is important to our products. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees. Any of the foregoing could have a material adverse effect on our business, financial condition, and results of operations.

We may become involved in intellectual property litigation either due to claims by others that we are infringing their intellectual property rights or due to our own assertions that others are infringing upon our intellectual property rights.

The medical device industry in general has been characterized by extensive litigation and administrative proceedings regarding patent infringement and intellectual property rights. Our competitors hold a significant number of patents relating to medical laser technology. From time to time, we may commence litigation to enforce our intellectual property rights. An adverse decision in these actions or in any other legal action could limit our ability to assert our intellectual property rights, limit the value of our technology or otherwise negatively impact our business, financial condition and results of operations.

Monitoring unauthorized use of our intellectual property is difficult and costly. Unauthorized use of our intellectual property may have occurred or may occur in the future. Although we have taken steps to minimize the risk of this occurring, any such failure to identify unauthorized use and otherwise adequately protect our intellectual property would adversely affect our business. Moreover, if we are required to commence litigation, whether as a plaintiff or defendant, not only will this be time-consuming, but we will also be forced to incur significant costs and divert our attention and efforts of our employees, which could, in turn, result in lower revenue and higher expenses.

We cannot provide assurance that our products or methods do not infringe the patents or other intellectual property rights of third parties. Additionally, if our business is successful, the possibility may increase that others will assert infringement claims against us.

Determining whether a product infringes a patent involves complex legal and factual issues, and the outcome of a patent litigation action is often uncertain. We have not conducted an extensive search of patents issued or assigned to other parties, including our competitors, and no assurance can be given that patents containing claims covering our products, parts of our products, technology or methods do not exist, have not been filed or could not be filed or issued. Because of the number of patents issued and patent applications filed in our technical areas, our competitors or other parties may assert that our products and the methods we employ in the use of our products are covered by U.S. or foreign patents held by them. In addition, because patent applications can take many years to issue and because publication schedules for pending applications vary by jurisdiction, there may be applications now pending of which we are unaware, and which may result in issued

-54-

patents which our current or future products infringe. Also, because the claims of published patent applications can change between publication and patent grant, there may be published patent applications that may ultimately issue with claims that we infringe. There could also be existing patents that one or more of our products or parts may infringe and of which we are unaware. As the number of competitors in the market for medical lasers and as the number of patents issued in this area grows, the possibility of patent infringement claims against us increases. In certain situations, we may determine that it is in our best interests or their best interests to voluntarily challenge a party’sparty’s products or patents in

-50-

litigation or other proceedings, including patent interferences or re-examinations. As a result, we may become involved in unwanted litigation that could be costly, result in diversion of management’smanagement’s attention, require us to pay damages and force us to discontinue selling our products.

Infringement and other intellectual property claims and proceedings brought against us, whether successful or not, could result in substantial costs and harm to our reputation. Such claims and proceedings can also distract and divert management and key personnel from other tasks important to the success of the business. We cannot be certain that we will successfully defend against allegations of infringement of patents and intellectual property rights of others. In the event that we become subject to a patent infringement or other intellectual property lawsuit and if the other party’sparty’s patents or other intellectual property were upheld as valid and enforceable and we were found to infringe the other party’sparty’s patents or violate the terms of a license to which we are a party, we could be required to do one or more of the following:

Third-party claims of intellectual property infringement, misappropriation or other violation against us or our collaborators may prevent or delay the sale and marketing of our products.

The medical devices industry is highly competitive and dynamic. Due to the focused research and development that is taking place by several companies, including us and our competitors, in this field, the intellectual property landscape is in flux, and it may remain uncertain in the future. As such, there may be significant intellectual property related litigation and proceedings relating to our, and other third party, intellectual property, and proprietary rights in the future.

Our commercial success depends in part on our and any potential future collaborators’collaborators’ ability to avoid infringing, misappropriating and otherwise violating the patents and other intellectual property rights of third parties. It is uncertain whether the issuance of any third-party patent would require us or any licensee to alter our development or commercial strategies, obtain licenses, or cease certain activities. The medical device industry is characterized by extensive litigation regarding patents and other intellectual property rights, as well as administrative proceedings for challenging patents, including interference, derivation and reexamination proceedings before the USPTO or oppositions and other comparable proceedings in foreign jurisdictions. As discussed above, recently, due to changes in U.S. law referred to as patent reform, new procedures includinginter partesreview and post-grant review have been implemented. As stated above, this reform adds uncertainty to the possibility of challenge to our patents in the future.

Third parties may currently have patents or obtain patents in the future and claim that the manufacture, use or sale of our products infringes upon these patents. In the event that any third-party claims that we infringe their patents or that we are otherwise employing their proprietary technology without authorization and initiates

-55-

litigation against us, even if we believe such claims are without merit, a court of competent jurisdiction could hold that such patents are valid, enforceable and infringed by our products. In this case, the holders of such patents may be able to block our ability to commercialize the applicable products or technology unless we obtain a license under the applicable patents, or until such patents expire or are finally determined to be held invalid or unenforceable. Such a license may not be available on commercially reasonable terms or at all. Even if we are able to obtain a license, the license would likely obligate us to pay license fees or royalties or both, and the rights granted to us might be nonexclusive, which could result in our competitors gaining access to the same intellectual property. If we are unable to obtain a necessary license to a third-party patent on commercially reasonable terms, we may be unable to commercialize our products, or such commercialization efforts may be significantly delayed, which could in turn significantly harm our business.

-51-

For example, in December 2017, we were contacted by a third party suggesting that we should consider licensing three U.S. patents directed to the treatment of vitiligo, U.S. Pat. No. 6,979,327, or the ’327’327 patent, U.S. Pat. No. 7,261,729, or the ’729’729 patent, and U.S. Pat. No. 8,387,621, or the ’621’621 patent. In addition, we were also previously contacted in 2006 by the same third party suggesting that we should consider licensing the ’327’327 patent as well as the then pending application that became the ’729’729 patent. We believe that we will be meritorious if a claim of infringement of the ’327’327 patent, the ’729’729 patent, or the ’621’621 patent is asserted against us in a legal proceeding by this or any other third party. However, although we believe that we do not infringe the claims of the ’327’327 patent, the ’729’729 patent, or the ’621’621 patent, nor do we believe that we need a license to the ’327’327 patent, the ’729’729 patent, or the ’621’621 patent in order to freely commercialize our products, there is a possibility that a suit claiming infringement of the ’327’327 patent, the ’729’729 patent, or the ’621’621 patent will be brought against us, and we cannot assure that a court or an administrative agency will agree with our assessment with regard to non-infringement of the ’327’327 patent, the ’729’729 patent, or the ’621’621 patent. If it was necessary to obtain a license to the ’327’327 patent, the ’729’729 patent, or the ’621’621 patent and a license was not available on commercially reasonable terms or available at all, that could affect our ability to commercialize our products and materially and adversely affect our business.

If a third party commences a patent infringement action against us it could consume significant financial and management resources, regardless of the merit of the claims or the outcome of the litigation. Defense of infringement claims, regardless of their merit, would involve substantial litigation expense and would be a substantial diversion of management and other employee resources from our business, and may impact our reputation. In the event of a successful claim of infringement against us, we may be enjoined from further developing or commercializing our infringing products. In addition, we may have to pay substantial damages, including treble damages and attorneys’attorneys’ fees for willful infringement, obtain one or more licenses from third parties, pay royalties and/or redesign our infringing products or technologies, which may be impossible or require substantial time and monetary expenditure. In that event, we would be unable to further develop and commercialize our products, which could harm our business significantly.

Engaging in litigation to defend against third parties alleging that we have infringed their patents or other intellectual property rights is very expensive, particularly for a company of our size, and time-consuming. Some of our competitors may be able to sustain the costs of litigation or administrative proceedings more effectively than we can because they may have greater financial resources. Patent litigation and other proceedings may also consume significant management time. Uncertainties resulting from the initiation or continuation of patent litigation or other proceedings against us could impair our ability to compete in the marketplace. The occurrence of any of the foregoing could have a material adverse effect on our business, financial condition or results of operations.

We may become involved in lawsuits to protect or enforce our patents and other intellectual property rights, which could be expensive, time consuming and unsuccessful.

Competitors may infringe our patents, or we may be required to defend against claims of infringement. In addition, our patents also may become involved in inventorship, priority or validity disputes. To counter or

-56-

defend against such claims can be expensive and time consuming. In an infringement proceeding, a court may decide that a patent owned by us is invalid or unenforceable or may refuse to stop the other party from using the technology at issue on the grounds that our patents do not cover the technology in question. An adverse result in any litigation proceeding could put one or more of our patents at risk of being invalidated or interpreted narrowly. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation.

Even if resolved in our favor, litigation or other legal proceedings relating to intellectual property claims may cause us to incur significant expenses and could distract our personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments, and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on our common stock price. Such litigation or proceedings could substantially increase our operating losses and reduce the resources available for development activities or any future sales, marketing or distribution activities. We may not have sufficient financial or other resources to conduct such litigation or proceedings adequately. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their greater financial resources and more mature and developed intellectual property portfolios. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketplace.

-52-

We may be subject to claims that our employees, consultants or advisors have wrongfully used or disclosed alleged trade secrets of their current or former employers or claims asserting ownership of what we regard as our own intellectual property.

Many of our employees, consultants and scientific advisors are currently or were previously employed at universities or healthcare companies, including our competitors and potential competitors. Although we try to ensure that our employees, consultants and advisors do not use the proprietary information or know-how of others in their work for us, we have been and may in the future become subject to claims that we or these individuals have used or disclosed intellectual property, including trade secrets or other proprietary information, of any such individual’sindividual’s current or former employer. If we fail in defending any such claims, it could have a material adverse effect on our business, financial condition, and results of operations. Even if we are successful in defending against such claims, litigation could result in substantial costs to us and be a distraction to management.

In addition, while it is our policy to require our employees and contractors who may be involved in the conception or development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who, in fact, conceives or develops intellectual property that we regard as our own. The assignment of intellectual property rights may not be self-executing, or the assignment agreements may be breached, and we may be forced to bring claims against third parties, or defend claims that they may bring against us, to determine the ownership of what we regard as our intellectual property. Such claims could have a material adverse effect on our business, financial condition, and results of operations.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest and our business may be adversely affected.

Our trademarks or trade names may be challenged, infringed, circumvented or declared generic or determined to be violating or infringing on other marks. We may not be able to protect our rights to these trademarks and trade names, which we need to build name recognition among potential partners or customers in our markets of interest. At times, competitors or other third parties may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity and possibly leading to market confusion. In addition, there could be potential trade name or trademark infringement, or dilution claims brought by owners of

-57-

other trademarks. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively, and our business may be adversely affected. Our efforts to enforce or protect our proprietary rights related to trademarks, trade secrets, domain names, copyrights or other intellectual property may be ineffective and could result in substantial costs and diversion of resources and could adversely affect our business, financial condition, and results of operations.

Intellectual property rights do not necessarily address all potential threats.

The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations and may not adequately protect our business or permit us to maintain our competitive advantage. For example:

-53-

Should any of these events occur, they could have a material adverse effect on our business, financial condition, and results of operations.

Risks Related to Our Reliance on Third Parties

We depend on third-party suppliers for key components and sub-assemblies used in our manufacturing processes, and the loss of these third-party suppliers or their inability to supply us with adequate components and sub-assemblies could harm our business.

We have experienced, and are currently experiencing inconsistencies, in our DABRA catheter performance, as more fully described in the risk factor titled “—We have experienced inconsistencies in our DABRA catheter performance. This and any other development or manufacturing problems or delays could limit the potential growth of our revenue or increase our losses.” In addition to the inconsistencies and risks described in the foregoing risk factor, we may encounter unforeseen situations that would result in delays or shortfalls in manufacturing. Key components and sub-assemblies of DABRA are currently provided by a limited number of suppliers, and we do not maintain large inventory levels of these components and sub-assemblies. For example,

-58-

we rely on a limited number of suppliers for the Thyratron used to manufacture our lasers. If we experience a shortage in any of these components or sub-assemblies, we would need to identify and qualify new supply sources, which could increase our costs, result in manufacturing delays, and cause delays in the delivery of our products. We may also experience a delay in completing validation and verification testing or sterility audits for controlled-environment rooms at our manufacturing facility.

We also depend on limited source suppliers for some of our product components and sub-assemblies, and if any of those suppliers are unable or unwilling to produce these components or sub-assemblies or supply them in the quantities that we need, and at acceptable prices, we would experience manufacturing delays and may not be able to deliver our products on a timely or cost-effective basis to our customers, or at all, which could reduce our product sales, increase our costs, and harm our business. While we believe that we could obtain replacement components from alternative suppliers, we may be unable to do so. Losing any of these suppliers could cause a disruption in our production. Our suppliers may encounter problems during manufacturing due to a variety of reasons, including failure to follow specific protocols and procedures, failure to comply with applicable regulations, equipment malfunction and environmental factors. Establishing additional or replacement suppliers for these materials may take significant time, as certain of these suppliers must be approved by regulatory authorities, which could disrupt our production. As a result, we could experience significant delays in manufacturing and delivering our products to customers. We cannot assure you we can continue obtaining required materials, components, and sub-assemblies that are in short supply within the time frames we require at an affordable cost, if at all. If we cannot secure on a timely basis sufficient quantities of the materials we depend on to manufacture our products, if we encounter delays or contractual or other difficulties in our relationships with these suppliers, or if we cannot find replacement suppliers at an acceptable cost, then manufacturing our products may be disrupted, which could increase our costs, prevent or impair our development or commercialization efforts, and have a material adverse effect on our business, financial condition, and results of operations.

Our future operating results depend upon our ability to obtain components in sufficient quantities on commercially reasonable terms or according to schedules, prices, quality and volumes that are acceptable to us, and suppliers may fail to deliver components or we may be unable to manage these components effectively or obtain these components on such terms.

Because we currently obtain certain components globally, some of which are uniquely customized, from limited sources, we are subject to significant supply and pricing risks and exposed to multiple potential sources of component

-54-

shortages. Many components, including those that are available from multiple sources, are at times subject to industry-wide shortages and significant commodity pricing fluctuations that could materially adversely affect our financial condition and operating results. We are sourcing alternative parts to mitigate the challenges caused by these shortages, but there is no guarantee we will be able to continually do so as we scale production to meet our growth targets. The unavailability of any component or supplier could result in production delays, idle manufacturing facilities, product design changes and loss of access to important technology and tools for producing and supporting our products, as well as impact our capacity production. Our suppliers may not be willing or able to sustainably meet our timelines or our cost, quality and volume needs, or to do so may cost us more, which may require us to replace them with other sources. If our supply of components for a new or existing product continues to be delayed or constrained for any reason, including if an outsourcing partner delayed shipments of completed products to us or additional time is required to obtain sufficient quantities from the original source, or if we have to identify and obtain sufficient quantities from an alternative source, then our financial condition and operating results could be materially adversely affected. In addition, the continued availability of these components at acceptable prices, or at all, can be affected for any number of reasons, including if suppliers decide to concentrate on the production of common components or components for other customers instead of components customized to meet our requirements. While we have entered into agreements for the supply of many components, there can be no assurance that we will be able to extend or renew these agreements on similar terms, or at all. Component suppliers may suffer from poor financial conditions, which can lead to business failure for the supplier or consolidation within a particular industry, further limiting our ability to

-59-

obtain sufficient quantities of components on commercially reasonable terms. While we believe that we will be able to secure additional or alternate sources or develop our own replacements for most of our components, there is no assurance that we will be able to do so quickly or at all. Additionally, we may be unsuccessful in our continuous efforts to negotiate with existing suppliers to obtain cost reductions and avoid unfavorable changes to terms, source less expensive suppliers for certain parts and redesign certain parts to make them less expensive to produce. Any of these occurrences may harm our business, prospects, financial condition and operating results.

We and our component suppliers may not meet regulatory quality standards applicable to our manufacturing processes, which could have an adverse effect on our business, financial condition, and results of operations.

As a medical device manufacturer, we must register with the FDA and non-U.S. regulatory agencies, and we are subject to periodic inspection by the FDA and foreign regulatory agencies, for compliance with certain good manufacturing practices, including design controls, product validation and verification, in process testing, quality control and documentation procedures. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections by the FDA and foreign regulatory agencies. Our component suppliers are also required to meet certain standards applicable to their manufacturing processes.

We cannot assure you that we or our component suppliers comply or can continue to comply with all regulatory requirements. A failure by us or one of our component suppliers to achieve or maintain compliance with these requirements or quality standards may disrupt our ability to supply products sufficient to meet demand until compliance is achieved or, with a component supplier, until a new supplier has been identified and evaluated. Our or any of our component suppliers’ failure to complywith applicable regulations could cause sanctions to be imposed on us, including warning letters, fines, injunctions, civil penalties, failure of regulatory authorities to grant marketing approval of our products, delays, suspension or withdrawal of approvals or clearances, license revocation, seizures or recalls of products, operating restrictions and criminal prosecutions, which could harm our business. We cannot assure you that if we need to engage new suppliers to satisfy our business requirements, we will be able to locate new suppliers in compliance with regulatory requirements at a reasonable cost and in an acceptable timeframe. Our failure to do so could have a material adverse effect on our business, financial condition, and results of operations.

In the European Union, we must maintain certain International Organization for Standardization, or ISO, certifications to sell our products and must undergo periodic inspections by notified bodies, including the British Standards Institution, to obtain and maintain these certifications. If we fail these inspections or fail to meet these regulatory standards, it could have a material adverse effect on our business, financial condition, and results of operations.

-55-

We may form or seek strategic alliances or enter into licensing arrangements in the future, and we may not realize the benefits or costs of such alliances or licensing arrangements.

We may form or seek strategic alliances, create joint ventures or collaborations or enter into additional licensing arrangements with third parties that we believe will complement or augment our sales and marketing efforts with respect to our products and any future product candidates that we may develop. Any of these relationships may require us to incur non-recurring and other charges, increase our near and long-term expenditures, issue securities that dilute our existing stockholders or disrupt our management and business. In addition, we face significant competition in seeking appropriate strategic partners and the negotiation process is time-consuming and complex. Moreover, we may not be successful in our efforts to establish a strategic partnership or other alternative arrangements for our products. If we license products or businesses, we may not be able to realize the benefit of such transactions if we are unable to successfully integrate them with our existing operations and company culture. We cannot be certain that, following a strategic transaction or license, we will achieve the revenue or specific net income that justifies such transaction. Any delays in entering into new strategic partnership agreements related to our products could delay the commercialization of our products in

-60-

certain geographies for certain indications, which would harm our business prospects, financial condition and results of operations.

We rely on third parties to conduct our clinical trials and those third parties may not perform satisfactorily, including failing to meet deadlines for the completion of such trials, research and studies, or failing to comply with regulatory requirements.

We do not have the ability to independently conduct our clinical trials. We currently rely on third parties, such as CROs, clinical data management organizations, medical institutions and clinical investigators, to conduct our current and planned clinical trials and we expect to continue to rely upon third parties to conduct clinical trials of our investigational products. Third parties have a significant role in the conduct of our clinical trials and the subsequent collection and analysis of data. These third parties are not our employees, and except for remedies available to us under our agreements with such third parties, we have limited ability to control the amount or timing of resources that any such third party will devote to our clinical trials. The third parties we rely on for these services may also have relationships with other entities, some of which may be our competitors. Some of these third parties may terminate their engagements with us at any time. If we need to enter into alternative arrangements with a third party, it would delay our drug development activities.

Our reliance on these third parties for such medical device development activities will reduce our control over these activities but will not relieve us of our regulatory responsibilities. For example, we will remain responsible for ensuring that each of our clinical trials is conducted in accordance with the general investigational plan and protocols for the trial. Moreover, the FDA requires us to comply with GCP standards, regulations for conducting, recording and reporting the results of clinical trials to assure that data and reported results are reliable and accurate and that the rights, integrity and confidentiality of trial participants are protected. If we or any of our CROs fail to comply with applicable GCP requirements, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical trials before approving our marketing applications. We cannot assure you that upon inspection by a given regulatory authority, such regulatory authority will determine that any of our clinical trials substantially comply with GCP regulations. In addition, our clinical trials must be conducted with product produced under current cGMP or quality system regulations. Our failure to comply with these regulations may require us to repeat clinical trials, which would delay the marketing authorization process.

Misconduct by our CROs or other third-party contractors could also involve the improper use of information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. It is not always possible to identify and deter misconduct by third parties we contract with, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of significant penalties, damages, reputational harm, and the curtailment or restructuring of our operations, among others.

-56-

Risks Related to Ownership of Our Common Stock

The price of our stock may be volatile, which could result in substantial losses for investors. Further, an active, liquid and orderly trading market for our common stock may not be sustained, and we do not know what the market price of our common stock will be, and as a result it may be difficult for you to sell your shares of our common stock.

Prior to our listing on the NYSE in September 2018, there was no public market for shares of our common stock. Although our common stock is listed on the NYSE American, the market for our shares has demonstrated varying levels of trading activity. Furthermore, an active trading market for our shares may not be sustained in

-61-

the future. You may not be able to sell your shares quickly or at the market price if trading in shares of our common stock is not active. Further, an inactive market may also impair our ability to raise capital by selling shares of our common stock and may impair our ability to enter into strategic partnerships or acquire companies or products by using shares of our common stock as consideration, which could have a material adverse effect on our business, financial condition, and results of operations. In addition, the trading price of our common stock is likely to be highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control, including limited trading volume. In addition to the factors discussed in this “Risk“Risk Factors” section and elsewhere in this report, these factors include:

-57-

We are an emerging growth company and a smaller reporting company, and we cannot be certain if the reduced reporting requirements applicable to emerging growth companies and smaller reporting companies will make our common stock less attractive to investors.

We are an emerging growth company, as defined in the JOBS Act. For as long as we continue to be an emerging growth company, we may take advantage of exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and exemptions from the requirements of holding nonbinding advisory votes on executive compensation and stockholder approval of any golden parachute payments not previously approved. We could be an emerging growth company for up to five years following the year in which we completed our IPO, although circumstances could cause us to lose that status earlier. We will remain an emerging growth company until the earlier of (i) the last day of the fiscal year (a) following the fifth anniversary of the completion of our IPO, (b) in which we have total annual gross revenue of at least $1.07 billion or (c) in which we are deemed to be a large accelerated filer, which requires the market value of our common stock that is held by non-affiliates to exceed $700.0 million as of the prior June 30^th, and (ii) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period.

Even after we no longer qualify as an emerging growth company, we may still qualify as a “smaller“smaller reporting company”company” which may allow us to take advantage of many of the same exemptions from disclosure requirements including not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act and reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements. We cannot predict if investors will find our common stock less attractive because we may rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock, and our stock price may be more volatile.

Under the JOBS Act, emerging growth companies can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. We have elected to avail ourselves of this exemption and, therefore, we are not subject to the same new or revised accounting standards as other public companies that are not emerging growth companies. As a result, changes in rules of U.S. GAAP or their interpretation, the adoption of new guidance or the application of existing guidance to changes in our business could significantly affect our financial position and results of operations.

-60-

We have incurred and will continue to incur significant costs as a result of operating as a public company, and our management has devoted and will continue to devote substantial time to new compliance initiatives, including maintaining an effective system of internal controls over financing reporting.

As a public company, we have incurred and will continue to incur significant legal, accounting, insurance, and other expenses that we did not incur as a private company. We are subject to the reporting requirements of the Exchange Act, which require, among other things, that we file with the SEC, annual, quarterly and current reports with respect to our business and financial condition. In addition, the Sarbanes-Oxley Act, as well as rules subsequently adopted by the SEC and the NYSE American to implement provisions of the Sarbanes-Oxley Act, impose significant requirements on public companies, including requiring establishment and maintenance of effective disclosure and financial controls and changes in corporate governance practices. Further, in July 2010, the Dodd-Frank Wall Street Reform and Consumer Protection Act, or the Dodd-Frank Act, was enacted. There are significant corporate governance and executive compensation related provisions in the Dodd-Frank Act that require the SEC to adopt additional rules and regulations in these areas such as “say“say on pay”pay” and proxy access. Emerging growth companies are permitted to implement many of these requirements over a longer period and up to five years from the completion of our IPO. We intend to take advantage of this legislation but cannot guarantee that we will not be required to implement these requirements sooner than anticipated or planned and thereby incur unexpected expenses. Stockholder activism, the current political environment and the current high

-65-

level of government intervention and regulatory reform may lead to substantial new regulations and disclosure obligations, which may lead to additional compliance costs and impact the manner in which we operate our business in ways we cannot currently anticipate.

These rules and regulations applicable to public companies have increased and will continue to substantially increase our legal and financial compliance costs and to make some activities more time consuming and costly. If these requirements divert the attention of our management and personnel from other business concerns, they could have a material adverse effect on our business, financial condition, and results of operations. The increased costs will decrease our net income or increase our net loss, and may require us to reduce costs in other areas of our business or increase the prices of our products or services. We cannot predict or estimate the amount or timing of additional costs we may incur to respond to these requirements. The impact of these requirements could also make it more difficult for us to attract and retain qualified persons to serve on our board of directors, our board committees or as executive officers.

Future sales and issuances of a substantial number of shares of our common stock or rights to purchase common stock by our stockholders in the public market could result in additional dilution of the percentage ownership of our stockholders and cause our stock price to fall.

If our stockholders sell, or indicate an intention to sell, substantial amounts of our common stock in the public market, the trading price of our common stock could decline. As of September 30, 2021, we had outstanding 7,029,4387,005,367 shares of our common stock.

In connection with our 2020 equity offerings, we issued warrants to investors and H.C. Wainwright & Co., LLC, which acted as our placement agent. In connection with the sale of the Dermatology Business in 2021, we issued a warrant to the broker. We had an aggregate of 2,419,280 warrants outstanding as of September 30, 2021. We have an effective shelf registration statement and had an effective at-the-market, or ATM, offering.offering thereunder until January 18, 2022. During the nine months end September 30, 2021, we sold 3,757,093 shares of common stock under our ATM offering. In addition, pursuant to our 2018 Equity Incentive Plan, or 2018 Plan, equity incentive awards representing up to an aggregate of 122,801 shares of our common stock were available for issuance to our employees, directors and consultants as of September 30, 2021. The 2018 Plan includes an annual increase in the number of shares available for future grant each year pursuant to the “evergreen” provision of our 2018 Plan. Additionally, pursuant to our 2018 Employee Stock Purchase Plan, or ESPP, a total of 26,510 shares were available for sale under our ESPP as of September 30, 2021. The ESPP also includes an annual increase in the number of shares available for sale under our ESPP each year pursuant to the “evergreen” provision of our ESPP. In addition to the increase in shares available to grant in 2020 due to the “evergreen” provisions contained in the 2018 Plan and the ESPP, in the first quarter of 2020 we adopted the 2020 Inducement Equity Incentive Plan for the purpose of attracting, retaining and incentivizing employees in furtherance of our success. On adoption, 32,000 shares of common stock were reserved solely for the granting of inducement stock options, restricted stock, restricted stock units and other awards and 9,000 shares were available for issuance as of September 30, 2021. If these additional shares of common stock are issued and sold, or if it is perceived that

-61-

they will be sold, in the public market, this could result in additional dilution and the trading price of our common stock could decline.

Further, SEC regulations limit the amount of funds we can raise during any 12-month period pursuant to our shelf registration statement on Form S-3. We are currently subject to General Instruction I.B.6 to Form S-3, or the Baby Shelf Rule, and the amount of funds we can raise through primary public offerings of securities in any 12-month period using our registration statement on Form S-3 is limited to one-third of the aggregate market value of the voting and non-voting common equity held by non-affiliates. We are currently limited by the Baby Shelf Rule as of the filing of this Registration Statement, until such time as our public float exceeds $75 million. If we are required to file a new registration statement on another form, we may incur additional costs and be subject to delays due to review by SEC staff.

-66-

Further, additional capital may be needed in the future to continue our planned operations, including commercialization efforts, expanded research and development activities and costs associated with operating a public company. To raise capital, we may sell common stock, convertible securities or other equity securities in one or more transactions at prices and in a manner, we determine from time to time. If we sell common stock, convertible securities or other equity securities, investors may be materially diluted by subsequent sales. Such sales may also result in material dilution to our existing stockholders, and new investors could gain rights, preferences and privileges senior to the holders of our common stock.

If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business.

If one or more of the analysts covering us downgrades our stock or publishes inaccurate or unfavorable research about our business, our stock price may decline. In addition, if one or more of these analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our stock could decrease, which might cause our stock price and trading volume to decline.

Anti-takeover provisions under our charter documents and Delaware law could delay or prevent a change of control, which could limit the market price of our common stock and may prevent or frustrate attempts by our stockholders to replace or remove members of our board of directors or our current management and may adversely affect the market price of our common stock.

Our certificate of incorporation and bylaws contain provisions that could delay or prevent a change of control of our company or changes in our board of directors that our stockholders might consider favorable. Some of these provisions include:

-62-

objective standards, the NYSE American may delist the securities of any issuer: (i) if, in its opinion, the issuer’s financial condition and/or operating results appear unsatisfactory; (ii) if it appears that the extent of public distribution or the aggregate market value of the security has become so reduced as to make continued listing on the NYSE American inadvisable; (iii) if the issuer sells or disposes of principal operating assets or ceases to be an operating company; (iv) if an issuer fails to comply with the NYSE American’s listing requirements; (v) if an issuer’s common stock sells at what the NYSE American considers a “low selling price” and the issuer fails to correct this via a reverse split of shares after notification by the NYSE American; or (vi) if any other event occurs or any condition exists which makes continued listing on the NYSE American, in its opinion, inadvisable. There is no assurance that we will remain in compliance with these standards. For example, the NYSE American will consider suspending dealings in, or delisting, securities of an issuer that has stockholders’ equity of less than $6 million if that issuer has sustained losses from continuing operations and/or net losses in its five most recent fiscal years. We have had a loss from operations and net loss in each of our five most recent fiscal years. As of September 30, 2021, our stockholders’ equity was $21.5 million. If our stockholders’ equity falls below $6 million, the Exchange may determine that we are no longer suitable for listing and may commence delisting proceedings pursuant Section 1003(a)(iii) of the NYSE MKT Company Guide.

Delisting from the NYSE American would adversely affect our ability to raise additional financing through the public or private sale of equity securities, significantly affect the ability of investors to trade our securities and negatively affect the value and liquidity of our common stock. Delisting also could limit our strategic alternatives and attractiveness to potential counterparties and have other negative results, including the potential loss of employee confidence, decreased analyst coverage of our securities, the loss of institutional investors or interest in business development opportunities. Moreover, we committed in connection with the sale of securities to use commercially reasonable efforts to maintain the listing of our common stock during such time that certain warrants are outstanding.

We may be required to raise additional financing by issuing new securities, which may have terms or rights superior to those of our shares of common stock, which could adversely affect the market price of our shares of common stock and our business.

We will require additional financing to fund research, development and commercialization of our technology, to obtain and maintain patents and other intellectual property rights in our technology, and for working capital and other purposes. We may not be able to obtain financing on favorable terms, if at all. If we raise additional funds by issuing equity securities, the percentage ownership of our then-current shareholders will be reduced. Further, we may have to offer new investors in our equity securities rights that are superior to the holders of common stock, which could adversely affect the market price and the voting power of shares of our common stock. If we raise additional funds by issuing debt securities, the holders of these debt securities would similarly have some rights senior to those of the holders of shares of common stock, and the terms of these debt securities could impose restrictions on operations and create a significant interest expense for us which could have a materially adverse effect on our business.

We have not paid dividends in the past and have no immediate plans to pay dividends.

We plan to reinvest all of our earnings, to the extent we have earnings, in order to market our products and to cover operating costs and to otherwise become and remain competitive. We do not plan to pay any cash dividends with respect to our securities in the foreseeable future. We cannot assure you that we would, at any time, generate sufficient surplus cash that would be available for distribution to the holders of our common stock as a dividend.

-64-

-69-

Additional Risks Related to This Offering

Our management will have broad discretion as to the use of the proceeds from this offering and may not use the proceeds effectively.

Our management will have broad discretion as to the application of the net proceeds from this offering and could use them for purposes other than those contemplated at the time of the offering. Currently, we intend to use the net proceeds from this offering for general corporate purposes, including working capital, our atherectomy indication trial, and engineering efforts. We may use a portion of the net proceeds to acquire complementary products, technologies or businesses; however, we currently have no agreements or commitments to complete any such transactions and are not involved in negotiations to do so. See “Use of Proceeds.” We may also be required to apply a portion of the net proceeds for litigation expenses and to pay in connection with a judgment or settlement of private and government claims against us, including the payment of any government fines or penalties. We may also use a portion of the net proceeds to reserve against certain existing liabilities, debts, contractual liabilities as well as reserve for potential future claims. You will not have the opportunity, as part of your investment decision, to assess whether these proceeds are being used appropriately. Our management may use the net proceeds for corporate purposes that may not improve our financial condition or market value, which could cause the price of our shares of common stock to decline.

There is no public market for the warrantsSeries A Warrants, Series B Warrants or pre-funded warrants being offered in this offering.

There is no established public trading market for the warrantsSeries A Warrants, the Series B Warrants or the pre-funded warrants being offered in this offering, and we do not expect such a market to develop. In addition, we do not intend to apply to list the warrantsSeries A Warrants, the Series B Warrants or the pre-funded warrants on any securities exchange or nationally recognized trading system, including the NYSE American. Without an active market, the liquidity of the warrantsSeries A Warrants, the Series B Warrants and the pre-funded warrants will be limited.