| Bill To | Ship To | Total |
| Adastra | Andy Hale
Adastra
5451 27th St.
Langley BC v4w 3x8
Canada | $760,440.24 |
| Sales Rep | Customer PO # | Shipping Method | Ship Date | Payment Method |
| Matt Erickson | | Complimentary Shipping | 12/08/2020 | |
| Qty. | Item | | Rate | | | Amount | |
| 1 | EVC-600-ULT Chiller - Chillers 100 Gal -50F
Chiller 40,220 BTU/Hr -50F (-45.6C) leaving fluid temperature in 95F (35C) ambient air. 100 Gallon Pressurized closed loop stainless steel recirculating tank. -20F(-28.8C) to 125F (51.7C) ambient temperatures (Low to High).
| $ | 113,400.00 | | $ | 113,400.00 | |
| | | | | | | | |
| 1 | EVM-SMS-S150 Single Tank Solvent Management Skid
Single Tank Solvent Management Skid that has heat exchanger and pump connected to with four valves. | $ | 38,800.00 | | $ | 38,800.00 | |
| | | | | | | | |
| 1 | EVM-CS30 EV-Mass Centrifugal Separator
The EV-MASS Centrifugal Separator is a Peer-Reviewed modular skid solution for ethanol extraction. | $ | 129,250.00 | | $ | 129,250.00 | |
| | | | | | | | |
| 3 | EVM-DJCT-150-SAN EV - MASS DOUBLE JACKETED CONICAL TANK 150L
CONICAL TANK 150L DOUBLE JACKETED SANITARY 304 STAINLESS STEEL MADE IN CANADA | $ | 12,495.00 | | $ | 37,485.00 | |
| | | | | | | | |
| 1 | EVM-FS-1-HE Filter Skid - Single Filtration Skid with Pump and Heat Exchanger
Filter Skid - Single Filtration Skid with Pump and Heat Exchanger | $ | 34,200.00 | | $ | 34,200.00 | |
| | | | | | | | |
| 1 | EVM-FRS-22P-S2 Filtration Skid - EV-MASS Parallel Absorbent 6" - TALL
EV-MASS Filtration uses multiple stages of filtration to purify extracted oil, improving clarity, colour and flavour profile. An optional 10 or 5-micron high-flow sediment filter removes the bulk of suspended lipids and waxes from the solvent-oil mixture, before parallel adsorbent columns remove chlorophyll and other pigments. Adsorbent column can be filled with various filter media. Lastly, a 1-micron filtration bag collects microscopic sediment from the filter media to ensure the smallest wax and lipid particles are collected. | $ | 34,500.00 | | $ | 34,500.00 | |
| | | | | | | | |
| 1 | EV-MASS-CPP EV-MASS-CUSTOM-PIPE-PACKAGE
CUSTOM PIPE PACKAGE FOR THE EVMASS | $ | 10,000.00 | | $ | 10,000.00 | |
| | | | | | | | |
| 1 | SER-GT&C CSA Group Testing & Certifications
North American Certification, Field Certification // Project Scope: Field Certification/Evaluation of EV-MASS-CS-30 Centrifugal Separator C1D1 Category D&C1D2 Category D_Temp Code: T2_ Zone1 and Zone2 Gas Group: IIA_Temp Code: T2 with 'X' purge | $ | 8,820.00 | | $ | 8,820.00 | |
 | 1 of 3 |
| Qty. | Item | | Rate | | | Amount | |
| 1 | CMC-CPI-PACKAGE-SS-TOTE CIP-package-for-SS-totes
10 Ga top, shell and bottom 304 stainless steel construction, 2b finish on interior & exterior
Interior and exterior welds to have heat tint removed22-1/2" dia. top fill opening with drum cover and 1 1/2" triclamp connection installed in center of cover, white food grade gasket and stainless steel lever lock style clamp ring assembly. | $ | 1,776.88 | | $ | 1,776.88 | |
| | | | | | | | |
| 2 | CMC-KSLG-180G KENCO-SANITARY-LEVEL-GAUGE-180- GALLON-TANK
KENCO SANITARY LEVEL GAUGE FOR 180 GALLON TANK QTY 1-20 585.00 | $ | 810.00 | | $ | 1,620.00 | |
| | | | | | | | |
| 1 | CMC-MTR MATERIAL-TEST-REPORT-CUSTOM-METAL-CRAFT
MATERIAL TEST REPORT FROM CUSTOM METAL CRAFT. | $ | 343.50 | | $ | 343.50 | |
| | | | | | | | |
| 2 | CMC-180G-BC-TANK CUSTOM-METAL-CRAFT-180-GALLON- TANK
CUSTOM METAL CRAFT 180 GALLON RECOVERY TANK | $ | 5,453.21 | | $ | 10,906.42 | |
| | | | | | | | |
| 2 | UV-SYLTHERM-XLT UNIVAR-SYLTHERM-XLT
COLD SHOT HEAT TRANSFER FLUID | $ | 7,800.00 | | $ | 15,600.00 | |
| | | | | | | | |
| 2 | EVM-ITD Install & Training Day
Per day install & training. Travel and accommodations billed separately. | $ | 3,000.00 | | $ | 6,000.00 | |
| | | | | | | | |
| 1 | YS-EV-S-60K FallingFilm-Evaporator-EV-S-SERIES-60KW
SALES DESCRIPTION
Yellowstone EV S Series 60kW Falling Film Evaporator and Installation.
GMP COMPLIANT
MACHINE SPECIFICATIONS
VOLTAGE
480 V 3 Phase
AMPERAGE
75.5A - 82A
WATTAGE
60 kW
ALCOHOL RECOVERY RATE
250-300 LPH
(66-79 GPH)
OPERATIONAL FOOTPRINT
4' x 4' x 8'
SOLUTE MAX TEMPERATURE
194 °F (90 °C)
DWELL TIME
5 Seconds
ADDITIONAL EQUIPMENT INCLUDED
Radiator & Control Panel | $ | 279,342.00 | | $ | 279,342.00 | |
| | | | | | | | |
| 1 | FREIGHT Delivery/Freight/Handling | $ | 2,185.00 | | $ | 2,185.00 | |
| | | | | | | | |
| | | | | | | | |
| | Subtotal | | $ | 724,228.80 | |
| | Amount after discount | | $ | 724,228.80 | |
| | Tax (%) | | $ | 36,211.44 | |
| 2 of 3 |
Memo: V6.2 DG Disclaimer:
All Hazmat/Dangerous Goods in this consignment are fully and accurately described above by the proper shipping name, are properly classified and packaged, have dangerous goods safety marks affixed or displayed on them, and are in all respects in proper condition for transport according to applicable regulations. 24-H Emergency #: 1-800-265-0212 |
| 3 of 3 |
Order Form
This Order has been prepared by Evolved Extraction Solutions Ltd. ("Evolved") after assessment of the Purchaser's needs as communicated by the Purchaser and is governed by the Terms and Conditions and Limited Warranty attached hereto.
Until this Order is signed by both the Purchaser and Evolved, the prices in this Order are considered to be a quotation which may be revised at any time and which will expire, unless otherwise noted on this Order, thirty (30) days after such prices are provided to the Purchaser.
Execution of this Order by the Purchaser and Evolved and payment of the Deposit (as defined below) by the Purchaser completes the first phase of the Ethanol Extraction Solution Sales and Implementation Process (the "EV-Mass Process"). The Purchaser acknowledges (a) the second Design/Assembly phase of the EV-Mass Process will begin immediately, but completion of phase two is dependant on manufacturing lead times; and (b) the commencement of the third Build phase of the EV-Mass Process is dependant on the Purchaser completing the EV-Mass pre-installation requirements, at the Purchaser's sole cost and expense, to the satisfaction of Evolved, which requirements are set out in the pre-installation package to be provided to the Purchaser upon the completion of phase one. The fourth and final Hand-Off phase of the EV-Mass Process, which includes training and ongoing support services, will commence once the Ethanol Extraction Solution installed pursuant to this Order has been inspected and approved.
The parties intend and agree that a photocopy, facsimile or electronically signed copy of this Order shall be treated as an original, and shall be deemed to be as binding, valid, genuine and authentic as an original document for all purposes.
IN WITNESS WHEREOF, the parties have caused this Order to be executed by their duly authorized representatives.
| The Purchaser | | Evolved Extraction Solutions Ltd. |
| Adastra Labs Holdings Ltd. | | | |
| | | | | |
| By: | /s/ Andy Hale | | By: | /s/ Adam Temple |
| | | | | |
| Printed Name: | | Printed Name: |
| Andy Hale | | | |
| | | | | |
| Title: | CEO & Director | | Title: | CEO |
| | | | | |
| Date: | Aug 6, 2020 | | Date: | August 5, 2020 |
Appendix A
Parts without Materials Traceability Reports
Further to Section 23 of the Agreement, the parties acknowledge and agree that materials traceability reports will not be provided to the Purchaser for the following EE Solution components and/or parts:
1. 304 stainless steel sanitary elbow, t and cross piping pieces
2. Gylon 3505 NSF 61 approved gaskets
3. 3A discharge hoses
4. Nylon 6 food grade biomass bags and filter bags
5. 304 stainless steel sanitary ball valves
6. 316 stainless steel sanitary in-line sight glasses
7. 304 stainless steel sanitary sampling valves
8. 304 stainless steel sanitary colour remediation columns
9. 304 stainless steel sanitary tank lids
