1
                       SECURITIES AND EXCHANGE COMMISSION
                             Washington, D.C. 20549

                                   FORM 10-K

                ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF
                      THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 30, 1995      Commission file number 1-6770

                            MUELLER INDUSTRIES, INC.
             (Exact name of registrant as specified in its charter)

               DELAWARE                             25-0790410
     (State or other jurisdiction                (I.R.S. Employer
   of incorporation or organization)            Identification No.)

                               2959 N. ROCK ROAD
                           WICHITA, KANSAS 67226-1191
                    (Address of principal executive offices)

       Registrant's telephone number, including area code: (316) 636-6300
          Securities registered pursuant to Section 12(b) of the Act:

                                                  Name of each exchange
       Title of each class                         on which registered

    Common Stock, $0.01 Par Value                New York Stock Exchange

        Securities registered pursuant to Section 12(g) of the Act: None

Indicate by a check mark whether the registrant (1) has filed all reports 
required to be filed by section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the 
registrant was required to file such reports), and (2) has been subject to 
such filing requirements for the past 90 days.  Yes  /X/   No  / /

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K (Section 229.405 of this chapter) is not contained herein, 
and will not be contained, to the best of Registrant's knowledge, in 
definitive proxy or information statements incorporated by reference in Part 
III of this Form 10-K or any amendment to this Form 10-K.[___].

The number of shares of the Registrant's common stock outstanding as of March
7, 1996 was 17,372,298, excluding 2,627,702 treasury shares.  The aggregate 
market value of the 16,899,414 shares of common stock held by non affiliates
of the Registrant was $534,443,968 at March 7, 1996 (based on the closing
price on the consolidated transaction reporting system on that date).

                      DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following documents are incorporated by reference into this 
Report: (1) Registrant's Annual Report to Shareholders for the year ended 
December 30, 1995 (Part I and II); Registrant's Definitive Proxy Statement for
the 1996 Annual Meeting of Stockholders, scheduled to be mailed on or about 
March 18, 1996 (Part III).



     2


                            MUELLER INDUSTRIES, INC.


As used in this report, the terms "Company," "Mueller" and "Registrant" mean 
Mueller Industries, Inc. and its consolidated subsidiaries taken as a whole, 
unless the context indicates otherwise.


                               TABLE OF CONTENTS

                                                                      Page

PART I
   Item 1.     Business..................................................3
   Item 2.     Properties...............................................10
   Item 3.     Legal Proceedings........................................11
   Item 4.     Submission of Matters to a Vote of Security Holders......11


PART II
   Item 5.     Market for the Registrant's Common Stock and Related 
                  Stockholder Matters...................................11
   Item 6.     Selected Financial Data..................................11
   Item 7.     Management's Discussion and Analysis of Financial 
                  Condition and Results of Operations...................12
   Item 8.     Financial Statements and Supplementary Data..............12
   Item 9.     Changes in and Disagreements with Accountants on 
                  Accounting and Financial Disclosure...................12


PART III
   Item 10.    Directors and Executive Officers of the Registrant.......12
   Item 11.    Executive Compensation...................................12
   Item 12.    Security Ownership of Certain Beneficial Owners
                  and Management........................................12
   Item 13.    Certain Relationships and Related Transactions...........12


Part IV
   Item 14.    Exhibits, Financial Statement Schedules, and Reports
                  on Form 8-K...........................................13


Signatures..............................................................15













    3
                                     PART I

ITEM 1.     BUSINESS

Introduction

     The Company is a leading fabricator of copper, brass, plastic and 
aluminum products.  The range of these products is broad:  copper tube and 
fittings; brass and copper alloy rods, bars and shapes; aluminum and brass 
forgings; aluminum and copper impact extrusions; plastic fittings and valves; 
and refrigeration valves, driers and flare fittings.  These operations (the 
"Manufacturing Segment") accounted for approximately 95% of the Company's 
total net sales and 88% of total identifiable assets on a consolidated basis 
in 1995.  The Company markets its products to the heating and air 
conditioning, refrigeration, plumbing, hardware and other industries.  Mueller 
Brass Co. ("MBCo") and its subsidiaries operate twelve factories in five 
states and Canada and have distribution facilities nationwide and sales 
representation worldwide.

     The Company's natural resource operations are conducted through its 
wholly-owned subsidiary Arava Natural Resources Company, Inc. ("Arava") and 
the Company's 85% owned subsidiary Alaska Gold Company ("Alaska Gold").  
Natural resource operations consist principally of the operation of a short 
line railroad in Utah and a placer gold mining operating in Alaska.

     Information concerning net sales, operating income, and identifiable 
assets of each segment appears under "Note 12 - Industry Segments" on page 21 
in the Notes to Consolidated Financial Statements in Mueller's Annual Report 
to Stockholders for the year ended December 30, 1995.  Such information is 
incorporated herein by reference.

MANUFACTURING SEGMENT

     Products and Manufacturing Operations

     Mueller's standard products include a broad line of copper tube, which 
ranges in size from 1/8 inch to 8 inch diameter, and is sold in various 
straight lengths and coils.  Mueller is a market leader in the air 
conditioning and refrigeration tube markets.  Additionally, Mueller supplies a 
variety of water tube in straight lengths and coils used for plumbing 
applications in virtually every type of construction project.

     Other standard products include copper and plastic fittings and related 
components for the plumbing and heating industry that are used in water 
distribution systems, heating systems, air conditioning and refrigeration 
applications, and drainage, waste, and vent ("DWV") systems.  Additionally, 
valves, wrot copper and brass fittings, filter driers and other related 
assemblies are manufactured for commercial air conditioning and refrigeration 
applications such as vending machines, ice machines, walk-in coolers, and 
numerous refrigeration applications.  The refrigeration product line also 
includes products for the refrigeration and air conditioning installation and 
service markets.  A major portion of Mueller's products are ultimately used in 
the domestic residential and commercial construction markets and, to a lesser 
extent, in the automotive and heavy on and off-the-road vehicle markets.





    4
     Mueller's industrial products include brass rod, nonferrous forgings and 
impact extrusions that are sold primarily to Original Equipment Manufacturers 
("OEM") in the plumbing, refrigeration, fluid power, and automotive 
industries, as well as to other manufacturers and distributors.  The Port 
Huron, Michigan mill extrudes brass, bronze and copper alloy rod in sizes 
ranging from 3/8 inches to 4 inches in diameter.  These alloys are used in 
applications that require a high degree of machinability, wear and corrosion 
resistance, and electrical conductivity.  Mueller brass and aluminum forgings 
are used in a wide variety of end products, including automotive components, 
brass fittings, industrial machinery, valve bodies, gear blanks, computer 
hardware, and fire fighting equipment.  The Company also serves the 
automotive, military ordnance, aerospace and general manufacturing industries 
with cold-formed aluminum and copper impact extrusions.  Typical applications 
for impacts are high-strength ordnance, high-conductivity electrical 
components, builders' hardware, hydraulic systems, automotive parts and other 
uses where toughness must be combined with varying complexities of design and 
finish.

     The Company's manufacturing facilities have operated at high levels 
during 1995, 1994, and 1993.

     Marketing and Distribution

     Mueller's standard products are marketed primarily through its own sales 
and distribution organization, which maintains sales offices and distribution 
centers throughout the United States and in Canada.  Additionally, these 
products are sold and marketed through a network of agents, which, when 
combined with the Company's sales organization, provide the Company broad 
geographic market representation.

     Industrial Products are sold, primarily, direct to OEM customers.  
Outside of North America, the Company sells its products through various 
channels including exclusive distributors, agents and direct sales channels in 
over 65 countries, primarily in Europe, the Far East and the Middle East.

     Competition

     The businesses in which Mueller is engaged are highly competitive.  The 
principal methods of competition for Mueller's products are customer service 
and quality.  No material portion of Mueller's business is dependent upon a 
single customer or a small group of related customers.  The total amount of 
order backlog for Mueller's products on December 30, 1995 and December 31, 
1994 was not significant.

     The Company competes with various companies depending on the product 
line.  In copper tubing, there are more than five domestic competitors 
including Cerro Copper Products Co., Inc., Halstead Industries, Inc., Reading 
Tube Corporation, and Wolverine Tube, Inc. as well as many actual and 
potential foreign competitors.  Additionally, it competes with a large number 
of manufacturers of substitute products made from plastic, iron and steel.  In 
the copper fittings market, competitors include Elkhart Products, a division 
of Amcast Industrial Corporation, and NIBCO, Inc.  The plastic fittings 
competitors include more than a dozen companies.  The brass rod competitors 
include Cerro Metal Products Company, Inc., Chase Brass Industries, Inc., 
Extruded Metals Inc., and others.  As illustrated above, no one competitor 
offers the range of products as does the Company.  Management believes that 
the Company's ability to offer such a wide ranging product line is a 
competitive advantage in some markets.

    5
     Raw Materials and Supplies

     The major portion of Mueller's base metal requirements (primarily copper) 
are normally obtained through short-term supply contracts with competitive 
pricing provisions.  Other raw materials used in the production of brass, 
including brass scrap, zinc, tin and lead are obtained from zinc and lead 
producers, open-market dealers and customers with brass process scrap.  Raw 
materials used in the fabrication of aluminum and plastic products are 
purchased in the open market from major producers.

NATURAL RESOURCES SEGMENT

     Mueller, through its subsidiaries Arava and Alaska Gold, is engaged in 
the operation of a short line railroad in Utah and placer gold mining in 
Alaska.  It also owns interests in other natural resource properties.

     Short Line Railroad

     Utah Railway Company ("Utah Railway"), a wholly-owned subsidiary of 
Arava, operates over approximately 100 miles of railroad track in Utah.  Utah 
Railway serves four major customers pursuant to long-term contracts which 
account for more than 75% of tonnage hauled.  The Utah Railway transports more 
than five million tons of coal per year to an interchange point at Provo, 
Utah, although annual tonnage may vary significantly due to fluctuations in 
the demand for export coal.  The coal is then transported by connecting 
railroads to various customers including electric utilities, cement plants, 
west coast export facilities and others at destinations throughout the West.

     In January, 1996, the Utah Railway entered into an agreement with Union 
Pacific Railroad (UP) whereby UP was granted rights to operate over a portion 
of Utah Railway track.  In exchange, UP granted limited rights to Utah Railway 
for operations over Southern Pacific (SP) tracks to Grand Junction, Colorado 
and access to additional coal customers.  The agreement is contingent on the 
regulatory approval of the UP/SP merger.

     Gold Mining

     Alaska Gold mines placer gold in Nome, Alaska.  Alaska Gold produced 
18,731 net ounces of gold in 1995, 14,173 net ounces of gold in 1994, 22,440 
net ounces of gold in 1993, 17,965 net ounces of gold in 1992, and 19,016 net 
ounces of gold in 1991, at a net production cost of $307 per ounce in 1995, 
$376 per ounce in 1994, $280 per ounce in 1993, $306 per ounce in 1992, and 
$407 per ounce in 1991.  Based on the results of past exploratory drilling, 
Alaska Gold believes there may be various areas available on its properties to 
sustain open pit mining for ten years.

     Properties consist of approximately 14,500 acres in and adjacent to Nome.
In addition, Alaska Gold owns or has patented claims on approximately 10,400 
acres in the Fairbanks, Alaska area, and approximately 3,000 acres in the 
Hogatza, Alaska area.

     On March 14, 1996, the Company acquired the minority shareholders' 
fifteen percent interest in Alaska Gold, thereby making Alaska Gold a wholly-
owned subsidiary.





    6
     Coal Properties

     In 1994, United States Fuel Company ("U.S. Fuel"), a wholly-owned 
subsidiary of Arava, entered into an agreement to sell the majority of its 
assets.  The sale has not yet been consummated, but U.S. Fuel has granted 
extensions of the closing date to give the potential purchaser additional time 
to finalize financing.  If this sale is not completed, U.S. Fuel may offer the 
property to other potential buyers or consider other alternatives, while 
resuming full scale remediation.  Prior to March 1993, U.S. Fuel mined steam 
coal by the deep-mine process at its coal properties located in Carbon and 
Emery Counties, Utah.

     U.S. Fuel's coal properties include approximately 12,700 acres of which 
approximately 10,000 acres are owned and 2,700 acres are leased.  Following 
the proposed sale, U.S. Fuel will own approximately 1,100 acres.

     Other Natural Resources Properties

     The Company also has interests in various mineral properties located in 
nine states and Canada.  None of these mineral properties are significant to 
the Company's business, and may be sold, developed, or leased.

     Canco Oil & Gas Ltd. ("Canco"), a wholly-owned Canadian subsidiary, owns 
petroleum and natural gas rights to approximately 30,000 net acres in 
Saskatchewan, Canada.  The Company is considering various options including 
selling or leasing its rights to exploit the development potential of these 
properties.

     In 1992, Ruby Hill Mining Company ("Ruby Hill") entered into a four-year 
Exploration Agreement with Purchase Option (the "Exploration Agreement") with 
Homestake Mining Company of California ("Homestake") for its property near 
Eureka, Nevada.  Homestake has a substantial exploration and drilling program 
underway on the property.  In 1994, Homestake exercised its option to purchase 
the property; the total purchase price is $4 million payable over up to a six-
year period depending on timing of production decisions and commencement of 
production.  If Homestake produces a total of 500,000 ounces of gold or "gold 
equivalents" of other metals from this property, Ruby Hill is thereafter 
entitled to a three percent net smelter return royalty, after deduction for 
certain taxes and transportation.  In early 1996, Homestake confirmed its 
decision to proceed with production.  Arava owns 81% of the stock of Richmond-
Eureka Mining Company, which owns 75% of the stock of Ruby Hill.

LABOR RELATIONS

     The Company employs approximately 2,275 employees of which approximately 
925 are represented by various unions.  A majority of the unionized employees 
are under contracts which expire in 1999.

RAW MATERIAL AND ENERGY AVAILABILITY

     Adequate supplies of raw material are available to the Company.  
Sufficient energy in the form of natural gas, fuel oils and electricity is 
available to operate the Company's production facilities.  While temporary 
shortages of raw material and fuels may occur occasionally, they have not 
materially hampered the Company's operations.




    7
ENVIRONMENTAL MATTERS

     The Company is subject to various laws and regulations relating to 
environmental quality.  Compliance with these laws and regulations is a matter
of high priority.

     Mueller's provision for environmental compliance includes charges of $1.4 
million in 1995, $2.9 million in 1994, and $1.1 million in 1993.  Except as 
discussed below, the Company does not anticipate that it will need to make 
material expenditures for such compliance activities during the remainder of 
the 1996 fiscal year, or for the next two fiscal years.

     Mining Remedial Recovery Company ("MRRC"), a wholly-owned subsidiary of 
Arava, was formed for the purpose of managing the remediation of certain 
properties and the appropriate disposition thereof.

     1.     Cleveland Mill Site

     In 1993, the EPA issued special notice letters to all known potentially 
responsible parties ("PRPs") regarding the Cleveland Mill Superfund Site in 
Grant County, New Mexico.  In response, MRRC, Bayard Mining Corp. ("Bayard"), 
a wholly-owned subsidiary of Arava, and a third party filed a good faith offer 
to implement the remedy set forth in the EPA's Record of Decision ("ROD").  
Total future costs for remediating the site were estimated by the EPA in the 
ROD at approximately $6.2 million.  MRRC and Bayard, along with said third 
party, have entered into a consent decree relating to the site and have 
agreed to an allocation formula requiring Bayard and MRRC to pay 29.20% of 
future costs.  The third party has agreed to pay the balance.  Bids to 
process the Cleveland Mill tailings have been solicited from potential 
processors.

     2.     Hanover and Bullfrog Sites

     MRRC owns 80 acres in Grant County, New Mexico called the Hanover site, 
which contains about 2.7 million cubic yards of mill tailings.  During the 
third quarter of 1995, MRRC substantially completed its voluntary plan to 
regrade and cap tailings at the Hanover site, with completion expected by 
mid-1996.  MRRC also owns 148 acres located nearby in Grant County, New 
Mexico, called the Bullfrog site.  A voluntary plan to regrade and cap the 
soil at this site was completed in 1995.

     3.     Mammoth Mine Site

     MRRC owns title to some inactive mines in Shasta County, California.  
MRRC has continued a program begun in the late 1980s of sealing mine portals 
with concrete plugs in mine adits which were discharging water.  The sealing 
program has achieved a reduction in the metal load in discharges from these 
adits; however, additional reductions may be required.  In addition, the EPA 
and California Bureau of Water Quality have recently commissioned a study 
concerning the historic mine waste in the area, some of which is on MRRC 
property.








    8
     In 1994, a citizens suit was brought against MRRC under the authority of 
the Clean Water Act by the California Sportfishing Protection Alliance.  In 
January, 1996, MRRC settled this litigation by paying $200,000 and committing 
to spend $200,000 on additional remediation studies.  Also in January, Alta 
Gold Company ("Alta Gold") filed a lawsuit in the United States District Court 
for the Eastern District of California against the Company, Arava and MRRC.  
The lawsuit seeks reimbursement of Alta Gold's alleged past costs incurred 
controlling acid mine drainage on its property, unspecified damages, punitive 
damages, attorneys fees, and declaratory relief.  The Company intends to 
vigorously defend this action.

     4.     U.S.S. Lead

     In 1991, U.S.S. Lead Refinery, Inc. ("Lead Refinery"), responded to an 
information request from EPA under Superfund for information on whether Lead 
Refinery arranged for the disposal of hazardous substances in the vicinity of 
the Grand Calumet River/Indiana Harbor Ship Canal.  In 1991, Lead Refinery 
also responded to an information request under Superfund regarding the Lead 
Refinery site in East Chicago, Indiana.  In 1992, EPA advised Lead Refinery 
of its intent to list the property as a Superfund site.  Lead Refinery opposed 
such listing and, as of March 15, 1996, EPA has deferred such listing.

     In 1993, Lead Refinery entered into a Consent Order with the EPA pursuant 
to Section 3008(h) of the Resource Conservation and Recovery Act ("RCRA").  
The Consent Order covers remediation activities at the East Chicago, Indiana 
site and provides for Lead Refinery to complete certain on-site interim 
remedial activities and studies that extend off site.  Lead Refinery has 
submitted certain workplans to implement the remedial activities and is 
awaiting approval from EPA to commence the required corrective actions.  The 
costs for the studies and interim clean up efforts are expected to be 
approximately $2.5 million, the majority of which would be required to be 
expended in 1996 and 1997.  Once these activities are completed, additional 
work would likely be needed to investigate and remediate any contamination 
not addressed by the Consent Order.  Lead Refinery, without additional 
assistance from MRRC, lacks the financial resources needed to complete the 
additional remediation and intends to seek financial assistance from other 
PRPs to permit Lead Refinery to conduct a private-party cleanup under RCRA.

     Lead Refinery has been informed by the former owner and operator of a 
Superfund site located in Pedricktown, New Jersey that it intends to seek 
CERCLA response costs for alleged shipments of hazardous substances to the 
site.  Lead Refinery has executed an agreement regarding that site, which 
indefinitely extends the statute of limitations.  By letter dated January 26,
1996, Lead Refinery and other PRPs received from EPA, a proposed 
Administrative Order on Consent to perform the remedial design for operable 
Unit 1 of the Pedricktown Superfund Site.  EPA has requested that by March 26, 
1996, Lead Refinery and the other parties execute the Administrative Order on 
Consent.

     Miscellaneous

     In 1992, Mueller received a notice from the State of Indiana notifying 
Sharon (the Registrant's predecessor) that it had sixty days to coordinate 
with other PRPs and present a "good faith" proposal to the State regarding a 
site in Indiana.  Sharon is alleged to have contributed less than 1% of the 
hazardous wastes at this site.  Based upon estimated allocated liability and 
response costs, Mueller's liability is estimated at less than $250,000.


    9
     In 1994, the Company received notice from the EPA that MBCo was a PRP at 
the Jack's Creek/Sitkin Smelting Superfund Site in Eastern Pennsylvania.  MBCo 
is alleged to have contributed less than 1 percent of the hazardous wastes at 
this site.  Based upon its estimated allocation ranking, its share of the 
EPA's estimated cleanup costs would be less than $500,000.  The PRP Steering 
Committee has submitted technical data and studies supporting a less costly 
remedial plan to the EPA.  The EPA has not yet selected a final remedy.

     In 1986, the EPA notified Sharon that it may be considered a PRP with 
respect to allegedly hazardous wastes released from past mining operations 
conducted by UV Industries, Inc. ("UV") in Cherokee County, Kansas.  The EPA 
asserted that under CERCLA, Sharon was potentially responsible for the cost of 
investigation, clean-up and remediation of the wastes allegedly deposited 
circa 1917 during leasehold operations conducted by UV.  Sharon denied 
liability under CERCLA.  Mueller has never been contacted concerning this 
site and does not know the estimated costs of remediation of this site.

OTHER BUSINESS FACTORS

     The Registrant's business is not materially dependent on patents, 
trademarks, licenses, franchises or concessions held.  In addition, 
expenditures for company-sponsored research and development activities were 
not material during 1995, 1994, or 1993.  No material portion of the 
Registrant's business involves governmental contracts.



































   10
ITEM 2.      PROPERTIES

      Information pertaining to the Registrant's major operating facilities is 
included below. Except as noted, the Registrant owns all of its principal 
properties.  The Registrant's plants are in satisfactory condition and are 
suitable for the purpose for which they were designed and are now being used.

Location            Property Size                      Description

Port Huron, MI      260,000 sq. ft.         Brass rod mill.  Facility includes
                     23.19 acres            casting, extruding, and finishing 
                                            equipment to produce brass rods 
                                            and bars, in various shapes and 
                                            sizes.

Port Huron, MI       46,500 sq. ft.         Forgings plant.  Produces brass 
                                            and aluminum forgings.

Marysville, MI       62,500 sq. ft.         Aluminum and Copper Impacts plant. 
                      6.72 acres            Produces made to order parts using 
                                            cold impact processes.

Port Huron, MI       13,500 sq. ft.         Formed tube plant. 
                      5.11 acres            Produces copper fittings using 
                                            cold heading equipment.
                              
Fulton, MS          405,500 sq. ft.         Copper tube mill.
                     60.70 acres            Facility includes casting, 
                                            extruding and finishing equipment 
                                            to produce copper tubing,
                                            including tube feed stock for the 
                                            Company's copper fittings plants.
                              
Fulton, MS           70,500 sq. ft. (1)     Copper fittings plant.  High-
                                            volume facility that produces
                                            copper fittings using tube feed
                                            stock from the Company's copper 
                                            tube mill.
                              
Covington, TN       159,500 sq. ft.         Copper fittings plant.  
                     40.88 acres            Facility produces copper fittings 
                                            using tube feed stock from the 
                                            Company's copper tube mill.
                              
Strathroy, Ontario
Canada               54,000 sq. ft.         Copper fittings plant.  
                      4.67 acres            Facility produces copper fittings 
                                            for the Canadian domestic markets 
                                            and for export to European
                                            markets.
                              
Upper Sandusky, OH   82,000 sq. ft.         Plastic fittings plant.  
                      7.52 acres            Produces DWV fittings using 
                                            injection molding equipment.
                              




   11
Kalamazoo, MI       130,000 sq. ft.         Plastic fittings plant.  Produces 
                                            DWV fittings using injection 
                                            molding equipment.
                              
Cerritos, CA        115,000 sq. ft. (2)     Plastic fittings plant.  Produces 
                                            DWV fittings using injection 
                                            molding equipment.
                              
Hartsville, TN       78,000 sq. ft.         Refrigeration Products plant.  
                      4.51 acres            Produces products used in 
                                            refrigeration applications such as 
                                            ball valves, line valves, 
                                            compressor valves, and filter 
                                            driers.

In addition, the Company owns and/or leases other properties used as 
distribution centers and corporate offices.

(1)      Facility is leased under long-term lease agreement, with option to 
purchase at nominal cost.
(2)      Facility is leased under long-term lease agreement, with option to 
purchase for a stipulated purchase price prior to December 31, 1997.


ITEM 3.     LEGAL PROCEEDINGS

     Environmental Proceedings

     Reference is made to "Environmental Matters" in Item 1 of this Report, 
which is incorporated herein by reference, for a description of environmental 
proceedings.


ITEM 4.     SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

     None.


                                    PART II

ITEM 5.     MARKET FOR THE REGISTRANT'S COMMON STOCK AND RELATED
            STOCKHOLDER MATTERS

     The information required by Item 5 of this Report is included under the 
caption "Capital Stock Information" on page 23 of the Registrant's Annual 
Report to Stockholders for the year ended December 30, 1995, which information 
is incorporated herein by reference.


ITEM 6.     SELECTED FINANCIAL DATA

     Selected financial data are included under the caption "Selected 
Financial Data" on page 23 of the Registrant's Annual Report to Stockholders 
for the year ended December 30, 1995, which selected financial data is 
incorporated herein by reference.




   12
ITEM 7.     MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND
            RESULTS OF OPERATIONS

     Management's discussion and analysis of financial condition and results 
of operations is contained under the caption "Financial Review" on pages 8 and 
9 of the Registrant's Annual Report to Stockholders for the year ended 
December 30, 1995 and is incorporated herein by reference.


ITEM 8.     FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

     See Index to Financial Statements and Supplemental Financial Information 
on pages 13 and 14 of this Annual Report on Form 10-K which is incorporated 
herein by reference.


ITEM 9.     CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND 
            FINANCIAL DISCLOSURE

     None.


                                    PART III

ITEM 10.     DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT

     The information required by Item 10 is contained under the caption 
"Ownership of Common Stock by Directors and Officers and Information about 
Director Nominees" in the Company's Proxy Statement for its 1996 Annual 
Meeting of Stockholders to be filed with the Securities and Exchange 
Commission on or about March 18, 1996 and is incorporated herein by reference.


ITEM 11.     EXECUTIVE COMPENSATION

     The information required by Item 11 is contained under the caption 
"Executive Compensation" in the Company's Proxy Statement for its 1996 Annual 
Meeting of Stockholders to be filed with the Securities and Exchange 
Commission on or about March 18, 1996 and is incorporated herein by reference.


ITEM 12.     SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT

     The information required by Item 12 is contained under the captions 
"Principal Stockholders" and "Ownership of Common Stock by Directors and 
Officers and Information about Director Nominees" in the Company's Proxy 
Statement for its 1996 Annual Meeting of Stockholders to be filed with the 
Securities and Exchange Commission on or about March 18, 1996 and is 
incorporated herein by reference.

ITEM 13.     CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS

     The information required by Item 13 is contained under the caption 
"Certain Relationships and Transactions with Management" in the Company's 
Proxy Statement for its 1996 Annual Meeting of Stockholders to be filed with 
the Securities and Exchange Commission on or about March 18, 1996 and is 
incorporated herein by reference.


   13
                                    PART IV

ITEM 14.     EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON FORM 8-K

(a)     The following documents are filed as part of this report:

1.     Financial Statements: the financial statements, notes, and report of 
       independent auditors described in Item 8 of this report, which are 
       incorporated by reference.

2.     Financial Statement Schedule: the financial statement schedule
       described in Item 8 of this report which is incorporated herein by 
       reference.

3.     Exhibits:

       3.1     Certificate of Incorporation of Mueller Industries, Inc. and 
               all amendments thereto (Incorporated herein by reference to 
               Exhibit 3.1 of the Registrant's Current Report on Form 8-K 
               dated December 28, 1990).

       3.2     By-laws of Mueller Industries, Inc., as amended and restated, 
               effective November 10, 1994.  (Incorporated herein by reference 
               to Exhibit 3 (ii) of the Registrant's Current Report on 
               Form 8-K, dated November 14, 1994.)

       4.1     Common Stock Specimen (Incorporated herein by reference to 
               Exhibit 4.1 of the Registrant's Current Report on Form 8-K 
               dated December 28, 1990).

       4.2     Rights Agreement, dated as of November 10, 1994, between the 
               Registrant and Continental Stock Transfer and Trust Company, as 
               Rights Agent, which includes the Form of Certificate of 
               Designation, Preferences and Rights of Series A Junior 
               Participating Preferred Stock of the Registrant, as Exhibit A, 
               the Form of Rights Certificate, as Exhibit B, and the Summary 
               of Rights to Purchase Preferred Stock, as Exhibit C.  
               (Incorporated by reference to Exhibit 99.1 of the Registrant's 
               Current Report on Form 8-K, dated November 14, 1994.)

       4.3     Certain instruments with respect to long-term debt of the 
               Company have not been filed as Exhibits to the Report since the 
               total amount of securities authorized under any such instrument 
               does not exceed 10 percent of the total assets of the Company 
               and its subsidiaries on a consolidated basis.  The Company
               agrees to furnish a copy of each such instrument upon request
               of the Securities and Exchange Commission.

      10.1     Employment Agreement, effective October 1, 1991 by and between 
               Mueller Industries, Inc. and Harvey L. Karp (Incorporated 
               herein by reference to Exhibit 10.3 of the Registrant's 
               Current Report on Form 8-K dated November 22, 1991).

      10.2     Stock Option Agreement, dated December 4, 1991 by and between 
               Mueller Industries, Inc. and Harvey L. Karp (Incorporated 
               herein by reference to Exhibit 10.4 of the Registrant's 
               Current Report on Form 8-K dated November 22, 1991).


   14
      10.3     Mueller Industries, Inc. 1991 Employee Stock Purchase Plan 
               (Incorporated herein by reference to Exhibit 4(a) of the 
               Registrant's Registration Statement on Form S-8 dated June 28, 
               1991).

      10.4     Mueller Industries, Inc. 1991 Incentive Stock Option Plan 
               (Incorporated herein by reference to Exhibit 4(a) of the 
               Registrant's Registration Statement on Form S-8 dated April 17,
               1992).

      10.5     Employment Agreement, effective June 3, 1992 by and between 
               Mueller Industries, Inc. and William D. O'Hagan (Incorporated 
               herein by reference to Exhibit 10.1 of the Registrant's Current 
               Report on Form 8-K dated June 3, 1992).

      10.6     Summary description of the Registrant's 1996 bonus plan for 
               certain key employees.

      10.7     Amendment to Employment Agreement, effective January 1, 1994, 
               to Employment Agreement by and between Mueller Industries, Inc. 
               and Harvey L. Karp.  (Incorporated herein by reference to 
               Exhibit 10.28 of the Registrant's Report on Form 10-K, dated 
               March 23, 1994, for the fiscal year ended December 25, 1993.)

      10.8     Employment Agreement, effective as of January 1, 1994, by and 
               between Mueller Industries, Inc. and William D. O'Hagan.  
               (Incorporated herein by reference to Exhibit 10.29 of the 
               Registrant's Report on Form 10-K, dated March 23, 1994, for the 
               fiscal year ended December 25, 1993.)

      10.9     Amendment to Employment Agreement, effective as of August 10, 
               1995, by and between Mueller Industries, Inc. and William D. 
               O'Hagan.  (Incorporated herein by reference to Exhibit 10.1 of 
               the Registrant's Report on Form 10-Q, dated October 20, 1995, 
               for the quarter ended September 30, 1995.)

      10.10    Mueller Industries, Inc. 1994 Stock Option Plan.  
               (Incorporated herein by reference to Exhibit 10.13 of the 
               Registrant's Report on Form 10-K, dated March 17, 1995, for the 
               fiscal year ended December 31, 1994.)

      10.11    Mueller Industries, Inc. 1994 Non-Employee Director Stock 
               Option Plan. (Incorporated herein by reference to Exhibit 10.14 
               of the Registrant's Report on Form 10-K, dated March 17, 1995, 
               for the fiscal year ended December 31, 1994.)

      13.0     Mueller Industries, Inc.'s Annual Report to Shareholders for 
               the year ended December 30, 1995.  Such report, except to the 
               extent incorporated herein by reference, is being furnished for 
               the information of the Securities and Exchange Commission only 
               and is not to be deemed filed as a part of this Annual Report 
               on Form 10-K.

      21.0     Subsidiaries of the Registrant.

      23.0     Consent of Independent Auditor.  (Includes report on 
               Supplemental Financial Information.)


   15
(b)     During the three months ended December 30, 1995, no Current Reports on 
Form 8-K were filed.


                                   SIGNATURES


     Pursuant to the requirements of Section 13 or 15(d) of the Securities 
Exchange Act of 1934, the Registrant has duly caused this report to be signed 
on its behalf by the undersigned, thereunto duly authorized, on March 21, 
1996.

     MUELLER INDUSTRIES, INC.

     /s/  HARVEY L. KARP
     Harvey L. Karp, Chairman of the Board


     Pursuant to the requirements of the Securities Exchange Act of 1934, this 
report has been signed below by the following persons on behalf of the 
Registrant and in the capacities and on the date indicated.

     Signature             Title                                Date

/S/  HARVEY L. KARP        Chairman of the Board, and Director  March 21, 1996
     Harvey L. Karp

/S/  ROBERT B. HODES       Director                             March 21, 1996
     Robert B. Hodes

/S/  ALLAN MACTIER         Director                             March 21, 1996
     Allan Mactier

/S/  WILLIAM D. O'HAGAN    President, Chief Executive Officer,  March 21, 1996
     William D. O'Hagan    Director

/S/  ROBERT J. PASQUARELLI Director                             March 21, 1996
     Robert J. Pasquarelli

     Pursuant to the requirements of the Securities Exchange Act of 1934, this 
report has been signed below by the following person on behalf of the 
Registrant and in the capacities and on the date indicated.

     Signature and Title                    Date

     /S/ EARL W. BUNKERS                    March 21, 1996
     Earl W. Bunkers
     Executive Vice President
     Chief Financial Officer
     (Principal Accounting Officer)

     /S/  KENT A. MCKEE                     March 21, 1996
     Kent A. McKee
     Vice President Business Development/
     Investor Relations

     /S/  RICHARD W. CORMAN                 March 21, 1996
     Richard W. Corman
     Director of Corporate Accounting
   16
                          INDEX TO FINANCIAL STATEMENTS

     The consolidated financial statements, together with the report thereon 
of Ernst & Young LLP dated February 9, 1996, appearing on page 10 through and 
including 22, of the Company's 1995 Annual Report to Stockholders are 
incorporated by reference in this Annual Report on Form 10-K.  With the 
exception of the aforementioned information, no other information appearing in 
the 1995 Annual Report to Stockholders is deemed to be filed as part of this 
Annual Report on Form 10-K under Item 8.  The following Consolidated Financial 
Statement Schedule should be read in conjunction with the consolidated 
financial statements in such 1995 Annual Report to Stockholders.  Consolidated 
Financial Statement Schedules not included with this Annual Report on Form 10-
K have been omitted because they are not applicable or the required 
information is shown in the consolidated financial statements or notes 
thereto.



                         SUPPLEMENTAL FINANCIAL INFORMATION


                                                                         Page

Schedule for the fiscal years ended December 30, 1995,
  December 31, 1994 and December 25, 1993.

     Valuation and Qualifying Accounts (Schedule II).......................17
































   17

MUELLER INDUSTRIES, INC.
SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
Years Ended December 30, 1995, December 31, 1994, and December 25, 1993
(In thousands)


                                                                         Additions
                                                              -------------------------------
                                          Balance at           Charged to                                                Balance
                                          beginning            costs and             Other                               at end
                                           of year              expenses           Additions         Deductions          of year
                                         ------------         ------------        -----------       -----------       -----------
                                                                                                       
1995
Allowance for Doubtful Accounts          $      3,336         $         75        $         -       $       425       $     2,986

Environmental Reserves                   $     11,178         $      1,421        $         -       $     3,014       $     9,585

Other Reserves (2)                       $     16,150         $     (1,157)       $         -       $     4,942       $    10,051

Valuation Allowance for Deferred
  Tax Assets                             $     65,927         $          -        $         -       $     5,006       $    60,921

1994
Allowance for Doubtful Accounts          $      3,495         $        186        $         -       $       345       $     3,336

Environmental Reserves                   $     10,448         $      2,914        $       125  (1)  $     2,309       $    11,178

Other Reserves (2)                       $     15,508         $      4,062        $      (125) (1)  $     3,295       $    16,150

Valuation Allowance for Deferred
  Tax Assets                             $     85,338         $          -        $         -       $    19,411       $    65,927

1993
Allowance for Doubtful Accounts          $      4,473         $         59        $         -       $     1,037       $     3,495

Environmental Reserves                   $     10,985         $      1,060        $     1,000  (1)  $     2,597       $    10,448

Other Reserves (2)                       $     18,317         $       (363)       $    (1,000) (1)  $     1,446       $    15,508

Valuation Allowance for Deferred
  Tax Assets                             $     88,081         $          -        $         -       $     2,743       $    85,338


<FN>

(1)   Reclass from Other Reserves to Environmental Reserves.

(2)   Other reserves are included in the balance sheet captions "Other
      current liabilities" and "Other noncurrent liabilities."








   18
                                 EXHIBIT INDEX


Exhibits   Description                                              Page
                        
4.2        Certain instruments with respect to long-term debt
           of the Company have not been filed as Exhibits to the 
           Report since the total amount of securities authorized
           under any such instrument does not exceed 10 percent 
           of the total assets of the company and its subsidiaries
           on a consolidated basis.  The Company agrees to furnish
           a copy of each such instrument upon request of the 
           Securities and Exchange Commission.                            
                        
10.6       Summary description of the Registrant's 1996 bonus plan 
           for certain key employees.            
                        
13.0       Mueller Industries, Inc.'s Annual Report to 
           Stockholders for the year ended December 30, 1995.
           Such report, except to the extent incorporated herein by
           reference, is being furnished for the information of 
           the Securities and Exchange Commission only and is not to
           be deemed filed as a part of this Annual Report on
           Form 10-K.            
                        
21.0       Subsidiaries of the Registrant.            
                        
23.0       Consent of Independent Auditor.  (Includes report on 
           Supplemental Financial Information.)