1
EXHIBIT 10.13
Certain confidential information has been omitted from this Exhibit 10.13
pursuant to a confidential treatment request filed separately with the
Securities and Exchange Commission. The omitted information is indicated by the
symbol "***" at each place in this Exhibit 10.13 where the omitted information
appeared in the original.
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
This TECHNOLOGY LICENSE AGREEMENT (the "Agreement") is made the 23rd day of
April 2001 (the "Effective Date")
BETWEEN
ARM LIMITED, whose registered office is situated at 110 Fulbourn Road, Cambridge
CB1 9NJ England ("ARM")
and
MARVELL INTERNATIONAL LIMITED whose registered office is situated at Richmond
House, 3rd Floor, 12 Par-la-Ville Road, P.O. Box HM 1022, Hamilton HK DX Bermuda
("LICENSEE")
ARM and LICENSEE are each also a "party" hereunder and collectively are the
"parties" hereunder.
WHEREAS
ARM is the owner of certain Intellectual Property, Intellectual Property
Derivatives, and the know-how to manufacture the ARM946E-S Core, ARM966E-S Core
and ETM9 Macrocell as such terms are defined below.
LICENSEE has requested ARM, and ARM has agreed, to license LICENSEE to
manufacture and distribute ARM Compliant Products as defined herein and thereby
to make use of certain portions of the Intellectual Property and Intellectual
Property Derivatives as set forth in this Agreement.
Therefore, in consideration of the mutual representations, warranties,
covenants, and other terms and conditions contained herein, the parties agree as
follows:
1. Definitions
1.1 "ARM CORE" shall mean either or both as the context admits of; (i) the
ARM946E-S Core; and (ii) the ARM966E-S Core.
1.2 "ARM946E-S CORE" shall mean the core as described and identified in the
ARM946E-S Core Technical Reference Manual: DDI-0155 as set forth in
Schedule 1, Section 2, Part A of this Agreement.
1.3 "ARM946E-S CORE TRANSFER MATERIALS" shall mean that technical information
with respect to the ARM946E-S Core as set forth in Schedule 1, Section 2
of this Agreement, and subject to the payment of the Core and Macrocell
Maintenance Fees (as defined in Clause 8.3) any Updates thereto.
1.4 "ARM966E-S CORE" shall mean the ARM966E-S Core as described and
identified in the ARM datasheet numbered ARM DDI 0164.
1.5 "ARM966E-S CORE TRANSFER MATERIALS" shall mean that technical information
with respect to the ARM966E-S Core as set forth in Schedule 1, Section 3
of this Agreement and subject to the payment of the Core and Macrocell
Maintenance Fees (as defined in Clause 8.3) any Updates thereto.
1.6 "ARM COMPLIANT PRODUCT" or "ACP" shall mean any single silicon chip
developed by LICENSEE or a Subsidiary (subject to Section 2.4), provided
that such single silicon chip:
(i) contains a Microarchitecture Compliant Core licensed from ARM; and
(ii) contains additional LICENSEE circuitry, which adds significant
functionality.
1.7 "ARMV5TE INSTRUCTION SETS" shall mean the instruction sets as are
described and identified in the ARM Architecture Reference Manual: ARM
DDI-0100E and such Updates thereto as ARM may from time to time release.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 1
2
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
1.8 "AUTHORIZED DISTRIBUTOR" shall mean those distributors, resellers, or
sales representatives appointed, in writing, by LICENSEE.
1.9 "AVERAGE SALE PRICE" or "ASP" shall mean the average price per unit
received by LICENSEE for a particular ARM Compliant Product calculated by
taking the invoice price charged at arm's length negotiation terms by
LICENSEE or any Subsidiary in the sale or distribution of any ARM
Compliant Product (excluding Test Chips defined in Section 3 and
excluding returned products), less any (i) value added, turnover, import,
or other tax, duty, or tariff payable thereon and (ii) freight and
insurance costs incurred (in so far as such value added, turnover,
import, or other tax, duty, tariff, freight and insurance costs are
charged in the sale of such ARM Compliant Products).
1.10 "AVS" shall mean; (i) for the ARM946E-S Core, the ARM Architectural
Validation Suite in binary code format identified in Schedule 1, Section
2, Part H Item H1 of this Agreement; and (ii) for the ARM966E-S Core the
ARM Architectural Validation Suite in binary code format identified in
Schedule 1 Section 3 Part H item H1.
1.11 "CLAIMS" shall mean a written demand received by ARM from the attorneys
for, and on the behalf of, a relevant third party demanding that ARM
cease and desist from any identified, alleged Intellectual Property
infringement.
1.12 "CONFIDENTIAL INFORMATION" shall mean: (i) any trade secrets relating to
the ARM946E-S Core, the ARM966E-S Core, the ETM9 Macrocell, the MultiICE,
the Transfer Materials and the Software designated in writing by either
party, by appropriate legend, as confidential; (ii) any information
designated in writing by either party, by appropriate legend, as
confidential; (iii) any information which is first disclosed verbally but
designated as confidential at the time of disclosure and is thereafter
reduced to writing for confirmation and sent to the other party within
thirty (30) days after its oral disclosure and designated, by appropriate
legend, as confidential; and (iv) the terms and conditions of this
Agreement.
1.13 "ETM9 MACROCELL" shall mean the ARM9TDMI Embedded Trace Macrocell, as
described and identified in the ETM Specification: IHI 0014 as set forth
in Schedule 1, Section 4, Part A Item A1 of this Agreement.
1.14 "ETM9 TRANSFER MATERIALS" shall mean the ARM9TDMI Embedded Trace
Macrocell Transfer Materials, as identified in Schedule 1, Section 4 of
this Agreement.
1.15 "END USER LICENSE" shall mean a license agreement substantially
conforming to that agreement set forth in Schedule 7 of this Agreement.
1.16 "FUNCTIONAL TEST VECTORS" shall mean; (i) with respect to the ARM946E-S
Core the test vectors identified in Schedule 1, Section 2, Part D, Items
D1 and D2 of this Agreement; and (ii) with respect to the ARM966E-S Core
the test vectors identified in Schedule 1, Section 3, Part D, Items D1
and D2.
1.17 "HARVARD ARCHITECTURE" shall mean a microprocessor architecture in which
the instruction stream for the integer unit has a separate port from the
data stream for such integer unit.
1.18 "INTELLECTUAL PROPERTY" shall mean any patents, patent rights, trade
marks, service marks, registered designs, topography or semiconductor
maskwork rights, applications for any of the foregoing, copyright,
know-how, unregistered design right, trade secrets and know-how, any
Intellectual Property Derivatives, and any other similar protected rights
in any country.
1.19 "ARM INTELLECTUAL PROPERTY" shall mean any Intellectual Property which
are taken into use in the design, use or production of the ARM Core, the
ETM9 Macrocell, the MultiICE, the Transfer Materials, or Software.
1.20 "INTELLECTUAL PROPERTY DERIVATIVES" shall mean derivatives of the
Intellectual Property, which term shall include: (i) for copyrightable or
copyrighted material, any translation, abridgement, revision or other
form in which an existing work may be recast, transformed or adapted;
(ii) for work protected by topography or mask right, any translation,
abridgement, revision or other form in which an existing work may be
recast, transformed or adapted; (iii) for patentable or patented
material, any improvement; and (iv) for material protected by trade
secret, any new material derived from or employing such existing trade
secret.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 2
3
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
1.21 "MICROARCHITECTURE COMPLIANT CORE" shall mean, an implementation of the
ARM946E-S Core or ARM966E-S Core as appropriate which:
(i) executes each and every instruction in the ARMv5TE Instruction
Sets;
(ii) executes no additional instructions to those contained in the
ARMV5TE Instruction Sets;
(iii) exhibits a Harvard Architecture;
(iv) exhibits a Pipeline Length of five (5);
(v) is Single Issue;
(vi) executes all instructions at an identical rate of cycles per
instruction ("CPI") to that specified in the ARM946E-S datasheet:
ARM DDI-0155 for the ARM946E-S Core or the ARM966E-S Core
datasheet ARM DDI 0164 for the ARM966E-S Core, and updates
thereto;
(vi) passes the Functional Test Vectors; and
(vii) has been verified in accordance with the provisions of Section 3
of this Agreement.
1.22 "MODELS" shall mean: (i) the object code and such source code of the
programs identified in Schedule 3, Section 1, Part A of this Agreement
and Schedule 3, Section 2, Part A of this Agreement as may be necessary
(at ARM's absolute discretion) to allow the support of multiple releases
of the specified simulator; and (ii) subject to the payment by LICENSEE
of the fee(s) set out in Section 8.2 of this Agreement, the object code
and such source code of the programs identified in Schedule 3, Section 1,
Part B of this Agreement as may be necessary (at ARM's absolute
discretion) to allow the support of multiple releases of the specified
simulator; together with such Updates thereof, if any, as are developed
by or for ARM.
1.23 "MULTIICE" shall mean the single hardware device identified in Schedule
1, Section 1, Part C, Item C1 of this Agreement.
1.24 "PIPELINE LENGTH" shall mean the number of clocked stages through which
each single-cycle instruction must pass to complete the execution of such
instruction.
1.25 "QUARTER" shall mean each calendar quarter ending the 31st of March, 30th
of June, 30th of September, and 31st of December of any year.
1.26 "SINGLE ISSUE" shall mean that only one instruction is issued for
execution within the integer unit in any single clock cycle (where for
the purposes of this definition clock shall mean the clock that advances
the pipeline).
1.27 "SOFTWARE" shall mean together the Models, Test and Vectors.
1.28 "SUBSIDIARY" shall mean any company the majority of whose voting shares
is now or hereafter owned or controlled, directly or indirectly, by a
party hereto. A company shall be considered a Subsidiary only so long as
such control exists. The parties agree that "Subsidiary" shall also mean
Marvell Asia Pte. Ltd, a Singapore corporation; and Galileo Technology
Group Ltd., an Israeli corporation ("GALILEO").
1.29 "SUBSIDIARY'S UNDERTAKING" shall mean an undertaking in the form set out
in Schedule 4 of this Agreement.
1.30 "Synthesizable RTL" shall mean (i) the rtl vectors identified in Schedule
1, Section 2, Part C item C1 and C2 of this Agreement for the ARM946E-S
Core; and (ii) the rtl identified in Schedule 1, Section 3, Part C item
C1 of this Agreement for the ARM966E-S Core.
1.31 "TEST" shall mean (i) the source code of the programs identified in
Schedule 1 Section 2, Part K, Items K1 and K2 of this Agreement for the
ARM946E-S Core; and (ii). the source code of the programs identified in
Schedule 1
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 3
4
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
Section 3, Part K, Items K1 and K2 of this Agreement for the ARM966E-S
Core, as applicable, together with such Updates, if any, as are developed
by or for ARM.
1.32 "TEST CHIP" shall mean (i); a device which complies with the test chip
specification set forth in Schedule 1, Section 2, Part E, Item E1 of this
Agreement for the ARM946E-S Core; and (ii) a device which complies with
the test chip specification set forth in Schedule 1, Section 3, Part E,
Item E1 of this Agreement for the ARM966E-S Core.
1.33 "TEST CHIP FUNCTIONAL TEST VECTORS" shall mean (i) those test vectors
identified in Schedule 1, Section 2, Part I of this Agreement for the
ARM946E-S Core; and (ii) those test vectors identified in Schedule 1,
Section 3, Part I of this Agreement for the ARM966E-S Core.
1.34 "TRADEMARKS" shall mean the trademarks, service marks and logos set forth
in Schedule 5 of this Agreement.
1.35 "TRANSFER MATERIALS" shall mean the ARM946E-S Core Transfer Materials,
the ARM966E-S Core Transfer Materials and the ETM9 Transfer Materials
individually or collectively, as applicable.
1.36 "UPDATES" shall mean any modifications, bug fixes, or enhancements that
ARM makes generally available to its other commercial licensees other
than as a new product.
1.37 "USE" shall mean copying of programs onto a computer for the purposes of
processing the instructions or statements contained therein, but
excluding disassembly, reverse assembly, or reverse compiling except as
permitted by local legislation implementing Article 6 of the EC Software
Directive and only to the extent necessary to achieve interoperability of
an independently created program with other programs. Disassembly,
reverse assembly, or reverse compiling for the purpose of error
correction is specifically prohibited.
2. LICENSE
2.1A ARM hereby grants to LICENSEE, under the ARM Intellectual Property rights
(including any Intellectual Property rights for which ARM has the right
to grant sub-licenses), a perpetual (subject to the termination
provisions of this Agreement), non-transferable (subject to Section 21.3
herein), non-exclusive, world-wide right and license to:
(i) use the MultiICE, and use and copy the ARM946E-S Core Transfer
Materials, ARM966E-S Core Transfer Materials and/or any ARM
Intellectual Property solely for the purposes of designing, having
designed (subject to the provisions of Section 2.3 herein),
manufacturing and having manufactured (subject to the provisions
of Section 2.2 herein) ARM Compliant Products.
(ii) sell, supply and distribute ARM Compliant Products, including
those incorporating the ETM9 Macrocell, and authorize LICENSEE's
Authorized Distributors to do the same;
(iii) use, modify, translate, reproduce, distribute and have
distributed, subject to the confidentiality obligations set forth
in Section 15 herein, the documentation identified in Schedule 1,
Section 2, Part A of this Agreement.
2.1B ARM hereby grants to LICENSEE, under the ARM Intellectual Property rights
(including any Intellectual Property rights for which ARM has the right
to grant sub-licenses), a perpetual (subject to termination provisions of
this Agreement), non-transferable (subject to Section 21.3 herein),
non-exclusive, world-wide right and license to use the ETM9 Transfer
Materials solely for the purpose of manufacturing, having manufactured
(subject to the provisions of Section 2.2 of the Agreement), designing
and having designed (subject to the terms of Section 2.3 of the
Agreement) the ETM9 Macrocell, provided that such ETM9 Macrocell shall be
incorporated solely into an ARM Compliant Product or another product
containing a different core licensed from ARM that is compatible with the
ETM9 Macrocell.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 4
5
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
2.2 LICENSEE may exercise its right to have ARM Compliant Products
manufactured by a sub-contracted manufacturer ("Manufacturer") in
accordance with the provisions of Section 2.1A(i) and 2.1B of this
Agreement provided that:
(i) in respect of any Manufacturer which is not a Subsidiary of
LICENSEE, LICENSEE notifies ARM of the identity of such
Manufacturer not less than thirty (30) days prior to first
prototype production by the Manufacturer; and
(ii) in respect of all Manufacturers, LICENSEE ensures that each
Manufacturer agrees (a) to be bound by obligations of
confidentiality no less restrictive than those contained in this
Agreement; and (b) to supply the ARM Compliant Products to be so
manufactured solely to LICENSEE.
In the event that any Manufacturer breaches the provisions referred to in
this Section 2.2, LICENSEE agrees to use all reasonable action, and any
other actions agreed to in writing between LICENSEE and ARM to cure such
breach. If LICENSEE fails to cure such breach within thirty (30) days (or
longer as agreed to in writing by the parties) , LICENSEE agrees to
terminate the right of Manufacturer to produce ARM Compliant Products.
Further LICENSEE agrees to indemnify ARM against all and any loss,
liability, costs, damages, reasonable expenses (including the reasonable
fees of lawyers and other professionals) suffered, incurred or sustained
as a result of such claims, ***
2.3 LICENSEE may exercise its right to have ARM Compliant Products designed
by a sub-contracted designer ("Designer") in accordance with the
provisions of Section 2.1A(i) and 2.1B of this Agreement, provided that:
(i) LICENSEE notifies ARM of the identity of LICENSEE's subcontracted
designer ("Designer") within 30 days of appointment of such
Designer; and
(ii) LICENSEE ensures that any Designer agrees (i) to be bound by
obligations of confidentiality no less restrictive than those
contained in this Agreement and (ii) to supply the ARM Compliant
Products to be so designed solely to LICENSEE.
In the event that any Designer breaches the provisions referred to in
this Section 2.3 of this Agreement, LICENSEE agrees to use all reasonable
action, and any other actions agreed to in writing between LICENSEE and
ARM to cure such breach. If LICENSEE is unable to cure such breach within
thirty (30) days (or longer as agreed to in writing by the parties),
LICENSEE agrees to terminate the right of such Designer to develop ARM
Compliant Products. Further, LICENSEE agrees to indemnify ARM against all
and any loss, liability, costs, damages, reasonable expenses (including
the reasonable fees of lawyers and other professionals) suffered,
incurred or sustained as a result of such claims, ***
2.4 During the term of this Agreement, any Subsidiary of LICENSEE may
exercise the licenses and rights granted under this Agreement by ARM
provided that:
(i) such Subsidiary agrees in writing, as set forth in Schedule 4 of
this Agreement, to be bound by the obligations of LICENSEE and to
comply with all the terms and conditions of this Agreement.
LICENSEE shall deliver to ARM a duly executed copy of the
Subsidiary's Undertaking within thirty (30) days of the date of
execution of such undertaking;
(ii) any breach of the terms and conditions of this Agreement by a
Subsidiary of LICENSEE shall constitute a breach of this Agreement
by LICENSEE and such Subsidiaries shall be jointly and severally
liable for any damages suffered by ARM as a result of such breach;
(iii) any termination of this Agreement as provided in Sections 19 of
this Agreement shall be effective in respect of all Subsidiaries
of LICENSEE; and
(iv) any license, granted in accordance with the provisions of this
Section 2.4 of this Agreement, shall automatically terminate, in
respect of a Subsidiary upon such Subsidiary ceasing to be a
Subsidiary of LICENSEE.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 5
6
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
2.5 For the avoidance of doubt, no right is granted to LICENSEE to:
(i) sub-license the rights licensed to LICENSEE pursuant to Section
2.1A and 2.1B of this Agreement; and
(ii) distribute any ARM Compliant Product prior to verification in
accordance with Section 3 herein except that in the event that it
is the intention of LICENSEE, and LICENSEE does proceed, to verify
a device in accordance with Section 3 herein, LICENSEE may
distribute *** prototype units of such device without having
verified such device provided that LICENSEE provides written
evidence to ARM that (a) the recipient of such devices is aware
that such device has not passed the verification process and (b)
the recipient has agreed to keep the recipient's use of the
non-verified device as confidential.
2.6 Except as licensed in this Section 2, LICENSEE acquires no right, title
or interest in and to the ARM Core, the ETM9 Macrocell, the ARM Transfer
and ARM's Intellectual Property therein. In no event shall the license
grant set forth in this Section 2 be construed as granting LICENSEE,
expressly or by implication, by estoppel or otherwise, a license to use
any ARM technology or ARM Intellectual Property other than that covered
by the terms of this Agreement.
3. VERIFICATION OF MICROARCHITECTURE COMPLIANT CORE
3.1 In respect of each implementation of an ARM Core, LICENSEE shall use the
relevant Synthesizable RTL to generate a pre-layout synthesized netlist,
(each a "PRE-LAYOUT SYNTHESIZED NETLIST").
3.2 In respect of each implementation of an ARM Core, LICENSEE shall produce
a post layout synthesized netlist which; (a) obeys LICENSEE's Synthesis
Timing Constraints File in respect of such synthesis; and (b) includes
back annotated delays derived from the physical layout (each a "POST
LAYOUT SYNTHESIZED NETLIST").
VERIFICATION BY EQUIVALENCE CHECKING OF RTL AND SYNTHESISED NETLIST
3.3 LICENSEE may verify the Post Layout Synthesized Netlist using an
equivalence checker, if LICENSEE elects such verification LICENSEE shall;
(i) using an equivalence checker compare the Pre-Layout Synthesized
Netlist with the Synthesizable RTL and generate the equivalence check log
results (each the "RTL EQUIVALENCE LOG RESULTS"); (ii) using an
equivalence checker compare the Post-Layout Synthesized Netlist with the
Pre-Layout Synthesized Netlist and generate the equivalence check log
results (each the "POST LAYOUT EQUIVALENCE LOG RESULTS"); (iii) simulate
the Functional Test Vectors on the Post-Layout Synthesized Netlist and
generate the log results (each the "TEST VECTOR LOG RESULTS"); and (iv)
run static timing analysis on the Post-Layout Synthesized Netlist and
generate the log results (each the "STA LOG RESULTS").
When the RTL Equivalence Log Results, Post Layout Equivalence Log
Results, Test Vector Log Results and the STA Log Results ("EQUIVALENCE
LOG RESULTS") indicate that no errors have been detected (or the parties
have jointly agreed in good faith, a waiver in respect of any errors),
LICENSEE shall submit the Equivalence logs to ARM. The Post Layout
Synthesized Netlist shall be verified on ARM's acceptance of the
Equivalence Results. ARM shall notify LICENSEE in writing within ten (10)
working days of receipt the Equivalence Log Results to ARM, whether or
not the Post Layout Synthesised Netlist has been verified. The parties
shall repeat the above process until either; (i) the Post Layout
Synthesised Netlist has been verified; or (ii) LICENSEE withdraws the
Post Layout Synthesised Netlist from the verification process.
For each synthesis used to manufacture ARM Compliant Products, LICENSEE
shall maintain a copy of the Pre-Layout Synthesized Netlist, Post-Layout
Synthesized Netlist and copies of the Equivalence Log Results. ARM may,
upon reasonable written notice audit the LICENSEE's records for the
purpose of satisfying itself that LICENSEE has complied with the
provisions of this Clause 3.3.
VERIFICATION BY SIMULATION OF SYNTHESISED NETLIST
3.4 LICENSEE may verify the Post Layout Synthesized Netlist (defined in
Clause 3.2) using the Synthesizeable
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 6
7
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
Functional Test Vectors. If LICENSEE elects such verification, LICENSEE
shall; (i) simulate the Functional Test Vectors on the Post Layout
Synthesized Netlist and generate the log results (each the "TEST VECTOR
LOG RESULTS"); (ii) simulate the AVS on the Post Layout Synthesized
Netlist and generate the log results (each the "AVS LOG RESULTS"); and
(iii) run static timing analysis on the Post-Layout Synthesized Netlist
and generate the log results (each the "STA LOG RESULTS").
When the Test Vector Log Results, the AVS Log Results and the STA Log
Results (together the "SIMULATION LOG RESULTS") indicate that no errors
have been detected (or the parties have jointly agreed in good faith, a
waiver in respect of any errors, LICENSEE shall submit the Simulation Log
Results to ARM. The Post Layout Synthesized Netlist shall be verified on
ARM's acceptance of the Simulation Log Results. ARM shall notify LICENSEE
in writing within ten (10) working days of receipt of the Simulation Log
Results, whether or not the Post Layout Synthesised Netlist has been
verified The parties shall repeat the above process until either; (i) the
Post Layout Synthesized Netlist has been verified; or (ii) LICENSEE
withdraws the Post Layout Synthesised Netlist verification process.
For each synthesis used to manufacture ARM Compliant Products, LICENSEE
shall maintain a copy of the Post-Layout Synthesized Netlist together
with copies of the Simulation Log Results. ARM may upon reasonable
written notice audit the LICENSEE's records for the purpose of satisfying
itself that LICENSEE has complied with the provisions of this Clause 3.4.
LICENSEE SPECIFIED VERIFICATION
3.5 LICENSEE may verify the each ARM Core using the LICENSEE's specified
verification flow. If LICENSEE elects such verification, LICENSEE shall,
inform ARM in writing at least ninety (90) days prior to tapeout of an
ARM Compliant Product that LICENSEE wishes to use LICENSEE's specified
verification flow and supply to ARM a copy of the proposed verification
flow (each a "VERIFICATION FLOW"). Within 30 days of the receipt of the
Verification Flow ARM shall notify LICENSEE in writing whether the
Verification Flow has been accepted by ARM. If accepted by ARM, LICENSEE
shall verify such ARM Compliant Products using the Verification Flow. If
after acceptance of the Verification Flow by ARM, LICENSEE whishes to
modify the Verification Flow LICENSEE shall submit a the modified
Verification Flow to ARM for reacceptance prior to verifying the relevant
ARM Core.
If ARM rejects either the Verification Flow or any modified Verification
Flows, ARM shall provide LICENSEE with written reasons for such rejection
together with any required changes. LICENSEE may resubmit the
Verification Flow or any modified versions thereof to ARM for acceptance.
3.6 If ARM fails to accept the Verification Flow LICENSEE shall; (i) verify
the Post Layout Synthesized Netlist in accordance with either the
provisions of Clauses 3.3 or 3.4; or (ii) produce and verify a Test Chip
in accordance with the provision of Clause 3.8.
VERIFICATION BY TEST CHIP
3.7 If LICENSEE fails to verify either (i) the Post Layout Synthesized
Netlist (as defined in Clause 3.2), or the ARM Core in accordance with
the provisions of Clause 3.5, LICENSEE shall design (or have designed)
and manufacture (or have manufactured) a Test Chip, for the first
Microarchitecture Compliant Core derived from the Transfer Materials for
each ARM Core
3.8 LICENSEE shall, in respect of each Test Chip, run:
(i) the Test Chip Functional Test Vectors, on each Test Chip and
deliver to ARM a copy of the log (each the "TEST CHIP TEST VECTOR
LOG RESULTS") generated by running the Test Chip Functional Test
Vectors together with five (5) samples of the Test Chip; and
(ii) the AVS on each Test Chip and deliver to ARM a copy of the log
(each the "TEST CHIP AVS RESULTS") generated by running the AVS.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 7
8
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
ARM may, at ARM's discretion, exercise the right to run the Test Chip
Functional Test Vectors and/or AVS on any Test Chip. The
Microarchitecture Architecture Compliant Core shall be verified upon:
(A) ARM's acceptance of the Test Chip Test Vector Log Results
delivered by LICENSEE. The Test Chip Test Vector Log Results shall
be accepted when they indicate that no errors have been detected
or where any errors detected have been jointly agreed, in good
faith, and a waiver agreed between the parties; and
(B) ARM's acceptance of either the Test Chip AVS Results (a) delivered
by LICENSEE or (b) generated by ARM. The Test Chip AVS Results
shall be accepted when they indicate that no differences have been
detected between the Test Chip AVS Results and the AVS reference
file supplied by ARM or where any errors detected have been
jointly agreed, in good faith, and a waiver agreed between the
parties.
ARM shall notify LICENSEE, in writing, within thirty (30) days of
delivery by LICENSEE of the Test Chip Test Vector Log Results,
Test Chip AVS Results and Test Chip samples to ARM, whether a Test
Chip has been verified or has failed the verification process. In
the event that any Test Chip fails the verification process, ARM
shall provide details of the errors that cause the failure to
LICENSEE and LICENSEE shall endeavour to correct the errors. The
parties shall repeat the above process until either; (i) the Test
Chip is verified; or (ii) LICENSEE withdraws the Test Chip from
the verification process. In the event that ARM fails to confirm
the result of the verification process within the Verification
Period, the Test Chip subject to the verification process shall be
deemed verified.
3.8 If either (i) the Post Layout Synthesized Netlist has been verified in
accordance with the provisions of Clause 3.3, 3.4 or 3.5; or (ii) the
Test Chip has been verified in accordance with the provisions of Clauses
3.7, and no errors have been detected (or where any errors have been
detected the parties have jointly agreed, in good faith, a waiver ),
LICENSEE may distribute such ARM Compliant Product without further
verification.
4. MODELS
4.1 ARM hereby grants to LICENSEE, under the ARM Intellectual Property rights
(including any Intellectual Property rights for which ARM has the right
to grant sub-licenses), a perpetual (subject to termination provisions of
this Agreement), non-transferable (subject to Section 21.3 herein),
non-exclusive, world-wide, royalty-free right and license to:
(i) copy and use, internally and for third party support purposes, the
Models and related documentation;
(ii) use, copy, distribute, and sub-license (provided that the end user
agrees to be bound by the End User License) the Use of the object
code of the Models identified in Schedule 3, Section 1, Part A of
this Agreement and Schedule 3, Section 2, Part A of this
Agreement.
(iii) sub-license the distribution rights granted to LICENSEE in Section
4.1(ii) herein to Authorized Distributors; and
(iv) modify, copy, use and distribute, in connection with the Models
identified in Schedule 3, Section 1, Part A of this Agreement and
Schedule 3, Section 2, Part A of this Agreement, the documentation
related thereto.
4.2 Except as provided by Section 4.1(ii) and (iii) herein, no right shall be
granted to LICENSEE to sub-license the right to sell, supply or otherwise
distribute the Models.
4.3 For a limited period of *** from the Effective Date, LICENSEE may extend
the licenses contained in Section 4.1 hereof so as to include additional
simulator-specific Models specified in Schedule 3, Section 1, Part B of
this Agreement and Schedule 3, Section 2, Part B of this Agreement by
giving written notice to ARM, referring to this Section 4.3, together
with payment, to ARM, of the Model Option Fee and an acknowledgement that
LICENSEE shall pay the Model Option Maintenance Fees in accordance with
the provisions of Section 8.2 herein.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 8
9
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
5. TEST LICENSE
5.1 ARM hereby grants to LICENSEE a non-transferable (subject to Section 21.3
herein), non-exclusive, world-wide right and license under the ARM
Intellectual Property rights, to reproduce and use internally only, the
Test and relevant Test documentation.
5.2 For the avoidance of doubt, except where both parties have agreed in
writing, no right is granted to LICENSEE to sell, supply or otherwise
distribute the Test.
6. OWNERSHIP OF THE SOFTWARE
6.1 In no event shall the license grants set forth in Sections 4.1 and 5.1
hereof be construed as granting LICENSEE, expressly or by implication, by
estoppel, or otherwise, a license under any ARM technology other than the
Software and related documentation.
6.2 Except as licensed to LICENSEE in Sections 4.1 and 5.1 hereof, all right,
title, and interest in and to the Software and related documentation
shall remain vested in ARM.
6.3 LICENSEE shall reproduce and not remove or obscure any notice
incorporated in the Software or related documentation by ARM to protect
ARM's Intellectual Property rights or to acknowledge the copyright and/or
contribution of any third party developer. LICENSEE shall incorporate
corresponding notices and/or such other markings and notifications as ARM
may reasonably require on all copies of Software and related
documentation used or distributed by LICENSEE.
7. TRADEMARK LICENSE/PROMOTIONAL OBLIGATIONS
7.1 ARM hereby grants to LICENSEE a non-transferable (subject to Section 21.3
of the Agreement), non-exclusive, royalty-free, world-wide right and
license under ARM's Intellectual Property rights, to use the Trademarks
in the promotion and sale of the ARM Compliant Products.
7.2 LICENSEE shall use the Trademarks in accordance with ARM's guidelines set
forth in Schedule 5 of this Agreement (the "Guidelines"), on (i) all ARM
Compliant Products sold or distributed by LICENSEE and (ii) all
documentation, promotional materials and software associated with such
ARM Compliant Products. ARM shall have the right to revise Schedule 5 of
this Agreement and the Guidelines (including the right to add further
trademarks or modify the Trademarks), provided that such revisions are
made in respect of the Guidelines issued to all licensees of the
Trademarks. Any such revisions shall be effective only with respect to
printed materials and products to be produced or manufactured after
ninety (90) days from receipt of ARM's written notice to LICENSEE.
7.3 Upon request by ARM, LICENSEE shall submit samples of documentation,
packaging, and promotional, advertising materials or URLs bearing the
Trademarks to ARM from time to time in order that ARM may verify
compliance with the Guidelines. In the event that any documentation,
packaging, promotional, advertising material or URL fails to comply with
the Guidelines, ARM shall notify LICENSEE and LICENSEE shall rectify such
documentation, packaging, and promotional or advertising materials so as
to comply with the Guidelines and cease using any such non-compliant
materials within sixty (60) days of the date of ARM's notice. Any
documentation, packaging, and promotional or advertising materials or
URLs not rejected, in writing, for failing to comply with the Guidelines
by ARM within ten (10) business days after delivery to ARM shall be
deemed approved.
7.4 LICENSEE agrees to assist ARM, at ARM's expense and upon ARM's reasonable
request, in maintaining the validity of the Trademarks. Upon ARM's
request, LICENSEE shall provide, free of charge, a reasonable number of
samples of the use of the Trademarks for the purpose of trademark
registration or renewal. At ARM's expense, LICENSEE shall support ARM in
the application and maintenance of any registration for the Trademarks in
the name of ARM by, upon ARM's request, executing any reasonable
documents required by the applicable laws of any jurisdiction for the
purpose of registering and/or maintaining the Trademarks. Any and all
registrations for the Trademarks shall be procured by and for ARM, at
ARM's expense.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 9
10
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
7.5 Except as provided by the terms of this Agreement, LICENSEE shall not use
or register any of the Trademarks, or any trademark, service mark,
device, logo word or mark that is confusingly similar to any of the
Trademarks, in any jurisdiction.
7.6 LICENSEE agrees to perform the promotional obligations set forth in
Schedule 9 attached hereto.
8. LICENSE FEES AND ROYALTIES
8.1 In consideration of the licenses granted to LICENSEE for the ARM946E-S
Core ARM966E-S Core and the ETM9 Macrocell, LICENSEE shall pay the
license fees ("License Fees") set out in Schedule 8, Part A of this
Agreement.
8.2 Upon giving written notice to include additional simulator-specific
Models under the provisions of Section 4.3 hereof, LICENSEE shall pay, to
ARM, the fee ("Model Option Fee") in accordance with Schedule 8, Part B
of this Agreement together with an acknowledgement that LICENSEE shall
pay the fees ("Model Option Maintenance Fees") in accordance with the
provisions of Schedule 8, Part F of this Agreement.
8.3 In consideration of the ARM Core and the ETM9 Macrocell maintenance
services provided under Section 11 herein, LICENSEE shall pay, to ARM,
the fees ("Core and Macrocell Maintenance Fees") set out in Schedule 8,
Part C of this Agreement.
8.4 In consideration of the Software Maintenance Services provided under
Section 12 herein, LICENSEE shall pay, to ARM, the fee ("Software
Maintenance Fee") set out in Schedule 8, Part D of this Agreement.
8.5 In consideration of the support services provided under Section 13
herein, LICENSEE shall pay, to ARM, the fee ("Support Fees") set out in
Schedule 8, Part E of this Agreement.
8.6 For each ARM Compliant Product that contains a single ARM Core, that is
sold, supplied or distributed by LICENSEE (including by any Subsidiary,
as permitted by this Agreement), LICENSEE shall pay a royalty ("Running
Royalty") in accordance with Section 8.6.1 set forth below.
8.6.1 ARM Core Running Royalties.
In an ARM Compliant Product with a single ARM Core embedded into the same
piece of silicon, the ARM Core Running Royalty payable by LICENSEE in any
Quarter shall be dependent on (i) the ARM Core ASP; (ii) the cumulative
volume of ARM Compliant Products containing the ARM Core sold or
distributed by LICENSEE (including by any Subsidiary, as permitted by
this Agreement) determined by column A in the table below; and (iii) the
Royalty Percentage of ASP determined by column B in the table below.
TABLE 1:
- --------------------------------------------------------------------------
A B
- --------------------------------------------------------------------------
CUMULATIVE VOLUME OF ACPS ASP < US$*** ASP >US$***
CONTAINING AN ARM946E-S CORE
OR AN ARM966E-S CORE.
- --------------------------------------------------------------------------
0 - *** units The greater of *** US$***
of the ASP or
US$***
- --------------------------------------------------------------------------
*** - *** The greater of *** US$***
of the ASP or US$***
- --------------------------------------------------------------------------
*** - *** The greater of *** US$***
of the ASP or US$***
- --------------------------------------------------------------------------
*** - *** The greater of US$***
***of the ASP or
US$***
- --------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 10
11
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
- --------------------------------------------------------------------------
*** The greater of *** US$***
of the ASP or US$***
- --------------------------------------------------------------------------
The number of ARM Compliant Products distributed by LICENSEEE or its
Subsidiaries which have an ASP of less than or equal to *** shall not be
counted in the number of units shipped which are greater than ***.
8.6.2 Multiple Core Running Royalties for an ARM Core
In an ARM Compliant Product with more than one ARM Core embedded into the
same piece of silicon, the following multiplier factors set forth in
Table 2 shall be applied to the cumulative volume of each ARM Compliant
Product containing more than one ARM Core.
Multiple ARM Core Running Royalty = N x M x (cumulative volume of each
ARM Compliant Product containing more than one ARM Core set out in column
A of Table 1) x (the appropriate Royalty Percentage of ASP determined by
column B of Table 1).
N = using Table 2, the number of ARM Cores embedded on the same piece of
silicon;
M = using Table 2, the applicable multiplier.
TABLE 2:
- -------------------------------------------------------------
TOTAL NUMBER OF ARM CORE MULTIPLIER (M)
EMBEDDED ON THE SAME PIECE
OF SILICON (N)
- --------------------------------------------------------------
1 ***
- --------------------------------------------------------------
2 ***
- ---------------------------- --------------------------------
3 ***
- ---------------------------- --------------------------------
4 ***
- ---------------------------- --------------------------------
>=5 ***
- ---------------------------- --------------------------------
8.7 Running Royalties due to ARM under this Agreement shall be paid in
accordance with the terms set forth in Schedule 6 of this Agreement.
8.8 In no event shall any fee be construed as being an advance payment of
Running Royalties and no right of set off of Running Royalties against
any fee or maintenance fees paid to ARM, by LICENSEE, shall exist.
LICENSEE shall not manipulate distribution of ARM Compliant Products for
the purpose of avoiding payment of Running Royalties at a higher rate
than would have been the case if such manipulation had not taken place.
8.9 LICENSEE shall keep all records of account as are necessary to
demonstrate compliance with its obligations under this Section 8 for a
period of four (4) years from the date of each Royalty Report.
8.10 ARM shall have the right for representatives of a firm of independent
Chartered Accountants reasonably acceptable to LICENSEE, who shall have
signed an appropriate non disclosure agreement, to which LICENSEE shall
not unreasonably object ("Auditors"), to make an examination and audit,
by prior appointment agreed between the parties, such agreement not to be
unreasonably withheld, during normal business hours, not more frequently
than once annually, of all records and accounts as may under recognized
accounting practices contain information bearing upon: (i) LICENSEE's
financial obligations under this Agreement, including but not limited to
the amounts of fees payable to ARM under this Section 8; (ii) the
LICENSEE ASP and the number of chips of ARM Compliant
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 11
12
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
Products sold or distributed by LICENSEE under this Agreement; (iii) the
amounts of Running Royalties payable to ARM under this Section 8; (iii)
information, calculations, methods, and systems used to calculate the
fees and Running Royalties payable under this Agreement; and (iv)
LICENSEE's compliance with the tax provisions of Section 8.11 herein. The
Auditors will only report to ARM upon whether LICENSEE has satisfied its
financial obligations under this Agreement, including whether the fees
and Running Royalties paid to ARM by LICENSEE were or were not correct,
and if incorrect, what are the correct amounts for the fees and Running
Royalties. No other information learned by the Auditors in the conduct of
such audit may be disclosed to ARM without LICENSEE's prior written
consent. LICENSEE shall be supplied with a copy of or sufficient extracts
from any preliminary and final report prepared by the Auditors. The
Auditor's report shall (in the absence of clerical or unreasonable error)
be final and binding on the parties. Such audit shall be at ARM's expense
unless it reveals an under payment of fees and Running Royalties of five
percent (5%) or more, in which case LICENSEE shall reimburse ARM for the
costs of such audit. LICENSEE shall make good any underpayment of
royalties forthwith. If the audit identifies that LICENSEE has made an
overpayment, such overpayment will be credited to the next such payment
or payments to be made by LICENSEE, if no such payments are due or
expected to become due, then ARM shall return such overpayment
immediately to LICENSEE.
8.11 Any income or other tax which LICENSEE is required by law to pay or
withhold on behalf of ARM with respect to any license fees and/or
royalties payable to ARM under this Agreement shall be deducted from the
amount of such license fees and/or royalties otherwise due, provided,
however, that in regard to any such deduction, LICENSEE shall give to ARM
such assistance as may be necessary to enable or assist ARM to claim
exemption therefrom, or credit therefor, and shall upon request furnish
to ARM such certificates and other evidence of deduction and payment
thereof as ARM may properly require.
8.12 LICENSEE shall pay all fees and royalties due to ARM under the terms of
this Agreement within forty-five (45) days of receipt of ARM's invoice
therefor (the "Due Date").
8.13 If any sum under this Agreement is not paid by the relevant due date,
then ARM shall notify LICENSEE, in writing, of such non-payment and
request payment of such unpaid sums forthwith. Without prejudice to ARM's
other rights and remedies, ARM reserves the right to charge interest on
such sum on a day to day basis (as well after as before any judgement)
from ten (10) days of the date of dispatch of such written notification
date to the date of payment at the rate of two and a half percent (2.5%)
per annum above the base rate of National Westminster Bank PLC from time
to time in force.
9. DELIVERY
9.1 ARM shall deliver the Transfer Materials and the Software in accordance
with the delivery schedule set forth in Schedule 2 of this Agreement.
9.2 Unless otherwise agreed in writing, delivery by ARM shall be by
electronic format to the extent possible or shall take place at a
location mutually agreed between the parties, and shall be marked for the
attention of the person designated by LICENSEE for design transfer and
support according to Section 10.1 hereof.
9.3 In the period ending *** from the Effective Date, ARM shall provide to
LICENSEE free of charge one (1) port to TSMC's generic process rules of
either the ARM946E-S Core or the ARM966E-S Core. The details of the
deliverables including delivery schedules shall be set out in a separate
written agreement to be entered into between the parties.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 12
13
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
10. CONTRACT ADMINISTRATORS
10.1 The parties hereby appoint the following individuals as their respective
contract administrator between ARM and LICENSEE with respect to this
Agreement:
ARM: LICENSEE:
For legal notices:
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
Executive VP Corporate Alliances General Counsel
- --------------------------------------------------------------------------------
ARM Limited Marvell Semiconductor, Inc.
- --------------------------------------------------------------------------------
110 Fulbourn Road 645 Almanor Avenue
- --------------------------------------------------------------------------------
Cherry Hinton Sunnyvale, California 94085
- --------------------------------------------------------------------------------
Cambridge Telephone: (408) 522-2309
- --------------------------------------------------------------------------------
CB1 9JN Facsimile: (408) 328-0918
- --------------------------------------------------------------------------------
England
- --------------------------------------------------------------------------------
For corporate issues:
cc:
- --------------------------------------------------------------------------------
Chief Operating Officer Same title at the address above
- --------------------------------------------------------------------------------
At the Cambridge address above
- --------------------------------------------------------------------------------
For financial matters:
- --------------------------------------------------------------------------------
Financial Controller VP, Chief Financial Officer
- --------------------------------------------------------------------------------
At the Cambridge address above At the address above
- --------------------------------------------------------------------------------
For Confidential Information:
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
New Product Licensing General Counsel
- --------------------------------------------------------------------------------
At the Cambridge address above At the address above
- --------------------------------------------------------------------------------
For design transfer and support:
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
Bryn Parry or Mark Evans
- --------------------------------------------------------------------------------
New Product Licensing Vice President, Data Storage Marketing
- --------------------------------------------------------------------------------
At the Cambridge address above At the address above
- --------------------------------------------------------------------------------
10.2 The contract administrators identified herein are appointed by the
parties for the receipt and dispatch on their behalf of all
communications relating to this Agreement. The contract administrators
shall also be responsible for the good progress of the parties'
performance under this Agreement and the timely resolution of all
technical, administrative and commercial issues which may arise from time
to time during the execution of this Agreement.
10.3 Each party reserves the right to change its appointment as above upon
seven (7) days written or electronic notice to the other party's then
current corresponding liaison.
11. CORE AND MACROCELL MAINTENANCE SERVICES
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 13
14
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
11.1 Subject to LICENSEE's payment of the Core and Macrocell Maintenance Fees
set forth in Schedule 8, Part C of this Agreement, ARM shall provide to
LICENSEE, in respect of the Transfer Materials, through the parties'
contract administrator, the following maintenance services for the period
of TWO (2) years from the Effective Date:
(i) the correction, to the extent reasonably possible, of any defects
in the ARM Core or the ETM9 Macrocell which cause such ARM Core or
ETM9 Macrocell not to operate in accordance with the functionality
described in the relevant datasheet and other applicable
documentation. If ARM determines that such defects are due to
errors in such description, ARM shall promptly issue corrections
to the technical reference manual and shall not be required to
correct the Transfer Materials, provided that LICENSEE is not
thereby prevented from commercially exploiting the ARM Core and/or
the ETM9 Macrocell;
(ii) any bug-fixes or corrections to the ARM Core and the ETM9
Macrocell made available by ARM to any third party; and
(ii) all modifications, enhancements and other Updates to the ARM Core,
and the ETM9 Macrocell created by ARM, provided that ARM may
exclude any modification, enhancement or update which ARM, in its
absolute discretion decides, results in the creation of a new
product and ARM makes such modification, enhancement or update
available to other licensees only as a new product.
11.2 Upon LICENSEE requesting ARM's assistance pursuant to the provision of
Section 11.1 hereof, LICENSEE shall promptly provide to ARM such samples
and technical information as ARM may reasonably require to enable ARM to
provide such assistance.
11.3 In notifying ARM of any defects or problems LICENSEE shall use the format
and medium reasonably requested by ARM. LICENSEE shall provide ARM
promptly with any information or assistance reasonably requested by ARM
to enable ARM to provide the maintenance service hereunder.
11.4 The maintenance services shall be provided at ARM's premises in
Cambridge, England.
11.5 For the avoidance of doubt, ARM's obligation under this Section 11 is
limited expressly to the provision of the maintenance services to
LICENSEE and Subsidiaries of LICENSEE pursuant to Section 2.4 above, and
ARM shall be under no obligation to provide the maintenance services to
LICENSEE's customers.
11.6 Any and all corrections, bug fixes, modifications, enhancements and other
Updates to be provided to LICENSEE under this Section 11 shall be
provided to LICENSEE within a commercially reasonable time, but in any
event no later than they are made available to other ARM licensees
licensing the same cores.
11.7 In the event that LICENSEE requests that ARM continue to provide
maintenance services after the expiration of the second (2nd) anniversary
of the Effective Date, the annual maintenance fees payable in respect of
any subsequent year shall be determined by good faith negotiations
between LICENSEE and ARM. However, ARM shall be under no obligation to
provide the maintenance services, in respect of any subsequent year,
until the annual maintenance fees have been agreed and paid to ARM.
12. SOFTWARE MAINTENANCE SERVICES
12.1 In consideration of the Software Maintenance Fees paid under this
Agreement as set out in Schedule 8, Part D hereof, ARM shall provide to
LICENSEE, in respect of the Software, through the parties' applicable
contract administrator, the following maintenance services for the period
of three (3) years from the Effective Date:
(i) to correct, to the extent reasonably possible, any defects in the
Software which cause the Software not to operate in accordance
with the description of the Software's function in the applicable
documentation. If ARM determines that such defects are due to
errors in such description, ARM shall promptly issue corrections
to the documentation and shall not be required to alter the
Software, provided that LICENSEE is not thereby prevented from
commercially exploiting the Software. Such corrections shall be
provided to LICENSEE within a commercially reasonable time, but in
any event no later than they are made available to other ARM
licensees licensing the same cores.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 14
15
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
(ii) to provide as available Updates to the Software. Such Updates
shall be provided to LICENSEE within a commercially reasonable
time, but in any event no later than they are made available to
other ARM licensees licensing the same cores.
12.2 LICENSEE shall promptly notify ARM of any error manifesting itself in the
Software. In respect of those errors which LICENSEE requires correction,
LICENSEE shall deliver to ARM an error report with sufficient description
of the error to enable ARM to provide correction to such error.
12.3 For the avoidance of doubt, unless otherwise agreed between the parties,
in writing, ARM's obligation under this Section 12 is limited expressly
to the provision of the Software maintenance services to LICENSEE and
Subsidiaries of LICENSEE pursuant to Section 2.4, and ARM shall be under
no obligation to provide the maintenance services to LICENSEE's
sub-licensees of the Software.
12.4 In the event that LICENSEE requests that ARM continue to provide software
maintenance services after the expiration of the third (3rd) anniversary
of the Effective Date, the annual software maintenance fees payable in
respect of any subsequent year shall be determined by good faith
negotiations between LICENSEE and ARM. However, ARM shall be under no
obligation to provide the software maintenance services, in respect of
any subsequent year, until the annual software maintenance fees have been
agreed and paid to ARM.
13. SUPPORT
13.1 In consideration of the Support Fees paid under this Agreement as set out
in Schedule 8, Part E hereof, ARM shall provide to LICENSEE, in respect
of the Software, the ARM Core, the ETM9 Macrocell, and the Transfer
Materials through the parties' contract administrator, for a period of
two (2) years from the Effective Date, reasonable telephone and written
consultation pertaining to the operation and application of the Software,
the ARM Core, the ETM9 Macrocell, and the Transfer Materials.
13.2 For the avoidance of doubt, ARM's obligation under this Section 13 is
limited expressly to the provision of the support services solely to
LICENSEE and Subsidiaries of LICENSEE pursuant to Section 2.4 above.
13.3 The services provided under this Section 13 shall together be limited to
a total of twenty (20) person days per annum for the ARM Core and a total
of four (4) person days per annum for the ETM9 Macrocell. For purposes of
this Section, each "day "consists of 8 hours and is calculated based on
the time during which ARM is actually analyzing, investigating or
resolving a particular support request made by LICENSEE. If requested by
LICENSEE, ARM shall provide additional support services in blocks of ten
(10) days per annum at ARM's then prevailing consultancy rates.
13.4 In the event that LICENSEE requests that ARM continue to provide support
services after the expiration of the second (2nd) anniversary of the
Effective Date, the annual support fees payable in respect of any
subsequent year shall be determined by good faith negotiations between
LICENSEE and ARM. However, ARM shall be under no obligation to provide
the support services, in respect of any subsequent year, until the annual
support fees have been agreed and paid to ARM
14. TRAINING
14.1 ARM shall provide to LICENSEE, at a mutually convenient date, two (2)
four-day standard ARM training courses to a maximum of twenty-four (24)
of LICENSEE's development, operations, customer service, and application
engineering personnel. The training shall be provided at ARM's premises
in Cambridge, England.
14.2 ARM may, at LICENSEE's request, and subject to availability of resources,
provide further such training courses at ARM's then standard rates.
15. CONFIDENTIALITY
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 15
16
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
15.1 Except as provided by Section 15.2 herein, each party shall maintain in
confidence the Confidential Information disclosed by the other party and
apply security measures no less stringent than the measures that such
party applies to protect its own like information, but not less than a
reasonable degree of care, to prevent unauthorized disclosure and use of
the Confidential Information. Except as provided in Section 15.2, the
period of confidentiality shall be: (i) indefinite with respect to the
terms of this Agreement, pattern generation tapes and photomasks;
provided, however, that LICENSEE shall have the right to disclose
pertinent sections of the Agreement to third parties which have entered
into confidentiality agreements with LICENSEE for the purposes of having
ARM Compliant Products developed, designed and/or manufactured for
LICENSEE by such third party; (ii) twenty (20) years from the date of
receipt by LICENSEE with respect to all deliverables identified in the
Schedules hereto as confidential or having limited confidentiality, i.e.
denoted as such by the letters "C" or "L" in the "Status" column,
together with any comparable technical information supplied by ARM to
LICENSEE or its Subsidiaries during the term of this Agreement (together
"Confidential Deliverables"); and (iii) five (5) years from the date of
receipt of the information by the receiving party with respect to all
other information.
15.2 In the event that either party qualifies the confidentiality of any of
its Confidential Information in writing by marking such Confidential
Information with the words "Limited Confidentiality", such Confidential
Information ("Limited Confidential Information") may be disclosed to a
third party who has entered into a non disclosure agreement ("NDA") with
the recipient containing substantially similar terms to this Section
15.2. With respect to the disclosure of business Confidential Information
the obligation to hold such Confidential Information in confidence may be
limited in duration to a period of not less than three (3) years from the
date of disclosure. With respect to the disclosure of technical
Confidential Information the obligation to hold such Confidential
Information in confidence may be limited in duration to a period of not
less than five (5) years from the date of disclosure. Notwithstanding the
foregoing, LICENSEE shall have the right to disclose Confidential
Information to a third party under an NDA containing substantially
similar terms to this Section 15.2 for the purposes of having ARM
Compliant Products developed, designed or manufactured for LICENSEE by
such third party. Any and all Confidential Information disclosed by
LICENSEE to a third party pursuant to an NDA under the terms set forth in
Sections 15.1 or 15.2 hereof must be destroyed or returned to ARM at the
end of the relevant NDA period or upon termination of this Agreement,
whichever is sooner.
15.3 The provisions of this Section 15 shall not apply to information which:
(i) is known and has been reduced to tangible form by the receiving
party prior to disclosure by the other party; or
(ii) is published or otherwise made available to the public other than
by a breach of this Agreement by a party hereto; or
(iii) is disclosed to the receiving party by a third party having the
lawful right to make such disclosure; or
(iv) is independently conceived by the receiving party, provided that
the receiving party is able to provide evidence of such
independent conception in the form of written records; or
(v) is released to the receiving party for disclosure to any third
party, other than on a confidential basis, by the disclosing party
in writing; or
(vi) as required by any court or other governmental body ; or
(vii) is approved by the disclosing party for release not under a NDA
designating the information as Confidential Information; or
(viii) is released to a third party by the disclosing party and
designated as non-confidential.
15.4 For the avoidance of doubt, LICENSEE Royalty Reports may be disclosed, in
confidence, to ARM's financial and/or legal advisors. In addition, ARM
may disclose the total unit sales of ARM Compliant Products aggregated
with total unit sales of ARM compliant products of other ARM licensees in
the same market segment, provided always that ARM shall not disclose
LICENSEE'S identity without LICENSEE's prior written consent.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 16
17
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
15.5 The parties agree that the disclosure of Confidential Information to a
party hereunder shall be coordinated through the appointed contract
administrators identified for such purpose in Section 10.1 hereof.
16. WARRANTIES
16.1 ARM warrants that the Transfer Materials delivered to LICENSEE will be
sufficient for a competent semiconductor manufacturer to produce an ARM
Core or an ETM9 Macrocell as appropriate which meets the functionality
specified in the applicable technical reference documentation. ***
LICENSEE's sole and exclusive remedy for any breach of the warranties in
this Clause 16.1 shall be for ARM to correct any errors in the Transfer
Materials and deliver such corrected Transfer Materials to LICENSEE or
replace the materials at ARM's discretion.
16.2 LICENSEE acknowledges that the Software cannot be tested in every
possible operation, and accordingly ARM does not warrant that the
Software will be free from all defects or that there will be no
interruption in its use. However, ARM warrants that the Software will be
complete and comply with the description of its functionality specified
in the documentation. LICENSEE's sole and exclusive remedy for any breach
of such warranty shall be for ARM, as soon as is reasonably practicable,
to correct any errors in the Software and deliver such corrected Software
to LICENSEE.
16.3 ARM warrants that as of the Effective Date, there are no pending Claims
that have been made or actions commenced against ARM for breach of any
third party Intellectual Property right.
16.4 ARM further warrants that based on ARM's knowledge, but expressly without
having undertaken any searches for prior art, that:
(i) as of the Effective Date, the Transfer Materials do not infringe
any third party copyright, trade secret or mask work rights;
(ii) ARM, or its applicable licensor, is the owner of the Transfer
Materials to be delivered to LICENSEE; and
(iii) ARM has the right to enter into the Agreement.
16.5 Except as expressly provided in this Agreement, the Transfer Materials,
the MultiICE, the Software, Updates and ARM Intellectual Property
contained therein are licensed "as is" and ARM makes no warranties
express, implied or statutory, including, without limitation, the implied
warranties of satisfactory quality or fitness for a particular purpose
with respect to the ARM Core, the ETM9 Macrocell, Transfer Materials, the
MultiICE, the Software, the Updates and ARM Intellectual Property
contained therein.
17. INFRINGEMENT
17.1 In the event of a suit against LICENSEE based upon a claim that any or
all of the ARM Core, the ETM9 Macrocell, the MultiICE, the Software or
any portion of the Transfer Materials, and any Updates to any of the
foregoing, delivered by ARM to LICENSEE under this Agreement (the
"Delivered Materials"), when used in accordance with this Agreement,
infringe any patent, copyright, maskwork right, trademark or trade secret
or other Intellectual Property right, ARM agrees to defend and indemnify
LICENSEE, at ARM's expense, and to pay costs and damages finally awarded
in any such suit subject to the limitations of this Clause 17.1, provided
that ARM is notified promptly in writing of the suit, LICENSEE has not
reached any compromise or settlement of such suit or made any admissions
in respect of the same, and at ARM's expense is given control of the suit
and all requested reasonable assistance to defend the same. If the use or
sale of any product incorporating, embodying or based upon the Delivered
Materials is enjoined as a result of such suit, ARM, at its sole option
and at no expense to LICENSEE, shall promptly (a) obtain for LICENSEE the
right to use the Delivered Materials in accordance with the license
grants contained in this Agreement; (b) shall make a modification of the
Delivered Materials so that the Delivered
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 17
18
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
Materials are no longer subject to such injunction, or (c) replace the
unmodified Delivered Materials, or infringing portions thereof, with
reasonably equivalent non-infringing products. If (a), (b) and (c) are
not available or commercially practical, then ARM shall pay to LICENSEE
compensatory damages, subject to the limitations of this Section 17.1.
The provisions of this Section 17.1 do not extend to any suit based upon
an infringement or alleged infringement of any patent, copyright, trade
secret, mask work, trademark or other proprietary right by: (a)
LICENSEE's manufacturing process; (b) any modification of the Delivered
Materials not made or authorized by ARM; or (c) the use of the Delivered
Materials, in combination with other equipment, technology or software
not purchased or licensed from ARM, provided that such claim would not
have occurred but for such process, combination, modification or
enhancement. THE FOREGOING STATES THE ENTIRE LIABILITY OF ARM WITH
RESPECT TO INTELLECTUAL PROPERTY INFRINGEMENT. IN NO EVENT SHALL ARM BE
LIABLE TO LICENSEE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
RESULTING THEREFROM. NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED
IN THIS AGREEMENT, ARM SHALL NOT BE LIABLE TO LICENSEE FOR ANY AMOUNTS IN
EXCESS OF *** UNDER THIS AGREEMENT FOR ALL CLAIMS ARISING OUT OF OR IN
CONNECTION WITH THE PROVISIONS OF THIS SECTION 17.1. THE EXISTENCE OF
MORE THAN ONE CLAIM OR SUIT WILL NOT ENLARGE OR EXTEND THE LIMIT.
LICENSEE RELEASES ARM FROM ALL OBLIGATIONS, LIABILITY, CLAIMS OR DEMANDS
IN EXCESS OF THIS LIMITATION.
17.2 In the event of a suit against ARM based upon a claim that (a) the
process used by or on behalf of LICENSEE in manufacturing ARM Compliant
Products incorporating, embodying or based upon the Delivered Materials;
(b) any ARM Core, or ETM9 Macrocell made by LICENSEE as a result of
modification of the Delivered Materials by or on behalf of LICENSEE
(provided that such claim would not have occurred but for such
modification); or (c) the use of the Delivered Materials, by LICENSEE in
combination with other equipment, technology or software not purchased or
licensed from ARM (provided that such claim would not have occurred but
for such combination, modification or enhancement), has infringed any
patent, copyright or trade secret or other Intellectual Property right,
LICENSEE agrees to defend and indemnify ARM, at LICENSEE's expense, and
to pay costs and damages finally awarded in any such suit, provided that
LICENSEE is notified promptly in writing of the suit, ARM has not reached
any compromise or settlement of such suit or made any admissions in
respect of the same, and at LICENSEE's expense is given control of the
suit and all requested reasonable assistance to defend the same. THE
FOREGOING STATES THE ENTIRE LIABILITY OF LICENSEE WITH RESPECT TO
INTELLECTUAL PROPERTY INFRINGEMENT. IN NO EVENT SHALL LICENSEE BE LIABLE
TO ARM FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING
THEREFROM. NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED IN THIS
AGREEMENT, LICENSEE SHALL NOT BE LIABLE TO ARM FOR ANY AMOUNTS IN EXCESS
OF *** BY LICENSEE UNDER THIS AGREEMENT FOR ALL CLAIMS ARISING OUT OF OR
IN CONNECTION WITH THE PROVISIONS OF THIS SECTION 17.2. THE EXISTENCE OF
MORE THAN ONE CLAIM OR SUIT WILL NOT ENLARGE OR EXTEND THE LIMIT. ARM
RELEASES LICENSEE FROM ALL OBLIGATIONS, LIABILITY, CLAIMS OR DEMANDS IN
EXCESS OF THIS LIMITATION.
17.3 In the event that there is a final adjudication of infringement, the
liability of either party for such infringement shall terminate with
respect to all damages regarding the infringing Intellectual Property
arising after the date of such final adjudication.
18. DISCLAIMER OF CONSEQUENTIAL DAMAGES
18.1 IN NO EVENT SHALL EITHER PARTY BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER SUCH DAMAGES ARE ALLEGED AS A
RESULT OF TORTIOUS CONDUCT OR BREACH OF CONTRACT OR OTHERWISE EVEN IF THE
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SUCH
DAMAGES SHALL INCLUDE BUT SHALL NOT BE LIMITED TO THE COST OF REMOVAL AND
REINSTALLATION OF GOODS, LOSS OF GOODWILL, LOSS OF PROFITS, LOSS OF USE
OF DATA, INTERRUPTION OF BUSINESS OR OTHER ECONOMIC LOSS BUT NOTHING IN
THIS SECTION 18.1 SHALL OPERATE TO EXCLUDE LIABILITY FOR DEATH OR
PERSONAL INJURY RESULTING FROM EITHER PARTY'S NEGLIGENCE OR WILFUL ACT.
19. TERM AND TERMINATION
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 18
19
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
19.1 This Agreement shall commence on the Effective Date and continue in force
unless and until terminated in accordance with the provisions of Section
19.2.
19.2 Without prejudice to any other right or remedy which may be available to
it, either party shall be entitled summarily to terminate this Agreement
by giving written notice to the other, if the other party:
(i) has committed a material breach of any of its obligations
hereunder which is not capable of remedy; or
(ii) has committed a material breach which is capable of remedy but
which has not been remedied within a period of thirty (30) days
following receipt of written notice to do so; or
(iii) makes any voluntary arrangement with its creditors for the general
settlement of its debts or becomes subject to an administration
order; or
(iv) has an order made against it, or passes a resolution, for its
winding-up (except for the purposes of amalgamation or
reconstruction) or has an lienholder take possession or has a
receiver or similar officer appointed over all or substantially
all of its property or assets.
20. EFFECT OF TERMINATION
20.1 Upon termination of this Agreement by either ARM or LICENSEE, LICENSEE
will immediately discontinue any use and distribution of all ARM
Compliant Products, the MultiICE, the Software, the Transfer Materials, ,
ARM Intellectual Property and ARM Confidential Information. LICENSEE
shall, at ARM's option, either destroy or return to ARM any Confidential
Information, including any copies thereof in its possession, together
with the Transfer Materials, the MultiICE, ARM Intellectual Property and
all copies of the Software in its possession. Within one month
thereafter, LICENSEE will furnish to ARM a certificate signed by a duly
authorized officer of LICENSEE that to the best of his or her knowledge,
information and belief, after due inquiry, LICENSEE has complied with
provisions of this Section 20.1. For the avoidance of doubt, any
sub-licenses of the Models granted by LICENSEE prior to the termination
of this Agreement shall survive such termination. Notwithstanding the
foregoing, upon termination of this Agreement ("Termination Date") for
any reason other than by reason of (a) LICENSEE's failure to pay fees
properly due and owing to ARM or (b) LICENSEE's breach of ARM's
Intellectual Property, LICENSEE shall be entitled, for a period of six
(6) months from the Termination Date (the "Ramp Down Period") to continue
exercising all rights and licenses granted under this Agreement for the
purposes of supplying and supporting ARM Compliant Products to customers
that existed prior to the Termination Date and to which LICENSEE is
contractually bound as of the Termination Date. Upon expiration of the
Ramp Down Period, or in those circumstances where LICENSEE is not
entitled to a Ramp Down Period as set forth above, LICENSEE will
immediately discontinue any use and distribution of all ARM Compliant
Products, the MultiICE, the Software, the Transfer Materials, ARM
Intellectual Property and ARM Confidential Information. LICENSEE shall,
at ARM's option, either destroy or return to ARM any Confidential
Information, including any copies thereof in its possession, together
with the Transfer Materials, the MultiICE, ARM Intellectual Property and
all copies of the Software in its possession. Within one month
thereafter, LICENSEE will furnish to ARM a certificate signed by a duly
authorized officer of LICENSEE that to the best of his or her knowledge,
information and belief, after due inquiry, LICENSEE has complied with
provisions of this Section 20.1.
20.2 Upon such termination, the provisions of Sections 1 (Definitions), 6
(Ownership of the Software), 8 (License Fees and Royalties to the extent
that any payment has accrued and is outstanding), 15 (Confidentiality),
17 (Infringement), 18 (Disclaimer of Consequential Damages), 20 (Effect
of Termination) and 21 (General) shall survive termination.
21. GENERAL
21.1 All communications between the parties including, but not limited to,
notices, royalty reports, error or bug reports, the exercise of options,
and support requests shall be in the English language.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 19
20
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
21.2 All notices which are required to be given hereunder shall be in writing
and shall be sent to the address of the recipient set out in this
Agreement or such other address as the recipient may designate by notice
given in accordance with the provisions of this Section 21.2. Any such
notice may be delivered personally, by commercial overnight courier or
facsimile transmission which shall be followed by a hard copy and shall
be deemed to have been served if by hand when delivered, if by commercial
overnight courier 48 hours after deposit with such courier, and if by
facsimile transmission when dispatched.
21.3 Neither party shall assign or otherwise transfer this Agreement or any of
its rights and obligations hereunder whether in whole or in part without
the prior written consent of the other.
21.4 Neither party shall be liable for any failure or delay in its performance
under this Agreement due to causes, including, but not limited to, acts
of God, acts of civil or military authority, fires, epidemics, floods,
earthquakes, riots, wars, sabotage, third party industrial disputes and
governments actions, which are beyond its reasonable control; provided
that the delayed party: (i) gives the other party written notice of such
cause promptly, and in any event within fourteen (14) days of discovery
thereof; and (ii) uses its reasonable efforts to correct such failure or
delay in its performance. The delayed party's time for performance or
cure under this Section 21.4 shall be extended for a period equal to the
duration of the cause.
21.5 ARM and LICENSEE are independent parties. Neither company nor their
employees, consultants, contractors or agents, are agents, employees or
joint venturers of the other party, nor do they have the authority to
bind the other party by contract or otherwise to any obligation. Neither
party will represent to the contrary, either expressly, implicitly, by
appearance or otherwise.
21.6 The parties agree that the terms and conditions of this Agreement shall
be treated as Confidential Information hereunder and shall not be
disclosed without the consent of both parties.
21.7 Failure by either party to enforce any provision of this Agreement shall
not be deemed a waiver of future enforcement of that or any other
provision.
21.8 If any provision of this Agreement, or portion thereof, is determined to
be invalid or unenforceable the same will be enforced to the maximum
extent permissible so as to effect the intent of the parties, and the
remainder of this Agreement will continue in full force and effect.
21.9 The headings to the sections of this Agreement are for ease of reference
only and shall not affect the interpretation or construction of this
Agreement.
21.10 This Agreement may be executed in one or more counterparts, each of which
shall be deemed an original, but all of which shall constitute one and
the same instrument.
21.11 This Agreement, including all Schedules and documents referenced herein,
constitutes the entire agreement between the parties with respect to the
subject matter hereof, and supersedes and replaces all prior or
contemporaneous understandings or agreements, written or oral, regarding
the subject matter. No amendment to, or modification of, this Agreement
shall be binding unless in writing and signed by a duly authorized
representative of both parties, except that ARM may unilaterally revise
the trademark guidelines in Schedule 5 of this Agreement as provided in
Section 7.2 hereof.
21.12 This Agreement shall be governed by and construed in accordance with the
laws of England.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 20
21
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
IN WITNESS WHEREOF the parties have caused this Agreement to be executed by
their duly authorized representative:
ARM LIMITED: MARVELL INTERNATIONAL LTD.
- --------------------------------------------------------------------------------
SIGNED: SIGNED:
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
NAME: NAME:
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
TITLE: TITLE:
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
DATE: DATE:
- --------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 21
22
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 1
- --------------------------------------------------------------------------------
Item Part Number Description Status
- --------------------------------------------------------------------------------
Note: The last column of the deliverable lists show the confidentiality status
of the deliverable. C - confidential, L - limited confidential and N -
non-confidential.
SECTION 1
GENERIC CORE TRANSFER MATERIALS
PART A
ARCHITECTURAL SPECIFICATION
- ------------------------------------------------------------------------------------------------
A1 AR010-DA-00001 ARM Architecture Reference Manual: DDI 0100E - Frame Format N
- ------------------------------------------------------------------------------------------------
A2 AR010-DA-03001 ARM Architecture Reference Manual: DDI 0100E - PDF Format N
- ------------------------------------------------------------------------------------------------
PART B
DOCUMENTATION
- ------------------------------------------------------------------------------------------------
B1 GD010-DC-01002 CRF (tabular test vector format) syntax N
- ------------------------------------------------------------------------------------------------
PART C
IN CIRCUIT EMULATION AND DEVELOPMENT HARDWARE
- ------------------------------------------------------------------------------------------------
C1 KPI-0019A MultiICE Interface Unit N
- ------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 22
23
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SECTION 2
SYNTHESIZABLE ARM946E-S CORE TRANSFER MATERIALS
PART A - TECHNICAL REFERENCE MANUAL
ARM946E-S CORE TECHNICAL REFERENCE MANUAL
- ------------------------------------------------------------------------------------------------
A1 AT170-DA-03001 ARM9E-S Technical Reference Manual: DDI-0165 - PDF format N
- ------------------------------------------------------------------------------------------------
A2 AT170-DA-00001 ARM9E-S Technical Reference Manual: DDI-0165 - Frame format N
- ------------------------------------------------------------------------------------------------
A3 AT210-DA-03001 ARM946E-S Technical Reference Manual: DDI-0155 - PDF format N
- ------------------------------------------------------------------------------------------------
A4 AT210-DA-00001 ARM946E-S Technical Reference Manual: DDI-0155 - Frame format N
- ------------------------------------------------------------------------------------------------
PART B - IMPLEMENTATION GUIDE
ARM946E-S CORE IMPLEMENTATION GUIDE
- ------------------------------------------------------------------------------------------------
B1 AT170-DC-02008 ARM9E-S Implementation Guide: DII-0003 - PDF format L
- ------------------------------------------------------------------------------------------------
B2 AT210-DC-02008 ARM946E-S Implementation Guide: DII-0005 - PDF format L
- ------------------------------------------------------------------------------------------------
PART C - ARM CORE SYNTHESISABLE SOURCE
ARM946E-S CORE SYNTHESISABLE VERILOG
- ------------------------------------------------------------------------------------------------
C1 AT170-MN-22100 ARM9E-S Synopsys Synthesisable Verilog C
AT170-MN-01001 Command Files for Synthesis of ARM9E-S Verilog from Specifiable
Library
- ------------------------------------------------------------------------------------------------
C2 AT210-MN-22100 ARM946E-S Synopsys Synthesisable Verilog C
AT210-MN-01001 Command Files for Synthesis of ARM946E-S Verilog from
AT210-DE-14001 Specifiable Library
Command Files for Synthesis of ARM946E-S Verilog from GTECH
Library
- ------------------------------------------------------------------------------------------------
C3 AT210-DE-15001 ARM946E-S Synthesized Netlist on GTECH Library from Verilog C
Source
- ------------------------------------------------------------------------------------------------
PART D - FUNCTIONAL TEST VECTORS
ARM946E-S CORE TEST VECTORS
- ------------------------------------------------------------------------------------------------
D1 AT210-VE-01001 ARM946E-S Core Instruction Execution Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
D2 AT210-VE-05001 ARM946E-S Core Speed Characterization Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
PART E - TEST CHIP
ARM946E-S TEST CHIP DOCUMENTATION
- ------------------------------------------------------------------------------------------------
E1 AT211-DA-03001 ARM946E-S Core Test Chip Implementation Guide DXI-0113 - PDF C
format
- ------------------------------------------------------------------------------------------------
E2 AT211-DC-01--- ARM946E-S Core Test Chip Validation Report (--- Partner ref.) L
- ------------------------------------------------------------------------------------------------
PART F - TEST CHIP SYNTHESISABLE SOURCE
ARM946E-S TEST CHIP SYNTHESISABLE VERILOG
- ------------------------------------------------------------------------------------------------
F1 AT211-MN-22100 ARM946E-S Core Test Chip Synopsys Synthesisable Verilog C
AT211-MN-01001 Command Files for Synthesis of ARM946E-S Test Chip Verilog
- ------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 23
24
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
PART G - TEST CHIP VALIDATION ENVIRONMENT
ARM946E-S TEST CHIP VALIDATION VERILOG
- ------------------------------------------------------------------------------------------------
G1 AT211-MN-22101 ARM946E-S Core Test Chip Verilog Validation Environment C
- ------------------------------------------------------------------------------------------------
PART H - AVS
ARM946E-S TEST CHIP VALIDATION
- ------------------------------------------------------------------------------------------------
H1 AT211-VA-04001 ARM946E-S Core Test Chip Validation Suite Binaries C
- ------------------------------------------------------------------------------------------------
PART I - TEST CHIP FUNCTIONAL TEST VECTORS
ARM946E-S TEST CHIP TEST VECTORS
- ------------------------------------------------------------------------------------------------
I1 AT211-VE-01001 ARM946E-S Core Test Chip Instruction Execution Vectors in CRF L
Format
- ------------------------------------------------------------------------------------------------
I2 AT211-VE-05001 ARM946E-S Core Test Chip Speed Characterization Vectors in CRF L
Format
- ------------------------------------------------------------------------------------------------
I3 AT211-VE-05003 ARM946E-S Core Test Chip Power Characterization Vectors in CRF L
Format
- ------------------------------------------------------------------------------------------------
PART J - VALIDATION KIT
ARM946E-S VALIDATION HARDWARE
- ------------------------------------------------------------------------------------------------
J1 KPI-0061A ARM946E-S Validation Kit C
- ------------------------------------------------------------------------------------------------
PART K - TEST
ARM946E-S TEST PROGRAMS
- ------------------------------------------------------------------------------------------------
K1 AT210-VE-02001 ARM946E-S Instruction Execution Vectors Source C
- ------------------------------------------------------------------------------------------------
K2 AT210-VE-07001 ARM946E-S Speed Characterization Vectors Source C
- ------------------------------------------------------------------------------------------------
K3 AT210-VE-09001 ARM946E-S Power Characterization Vectors Source C
- ------------------------------------------------------------------------------------------------
SECTION 2
SYNTHESIZABLE ARM966E-S CORE TRANSFER MATERIALS
PART A -TECHNICAL REFERENCE MANUAL
ARM966E-S CORE PRODUCT SPECIFICATION
- ------------------------------------------------------------------------------------------------
A1 AT200-DA-00001 ARM966E-S Core Technical Reference Manual: DDI-0164 - Frame N
Format
- ------------------------------------------------------------------------------------------------
A2 AT200-DA-03001 ARM966E-S Core Technical Reference Manual: DDI-0164 - PDF Format N
- ------------------------------------------------------------------------------------------------
PART B -IMPLEMENTATION GUIDE
ARM966E-S CORE DOCUMENTATION
- ------------------------------------------------------------------------------------------------
B1 AT200-DC-02008 ARM966E-S Core Implementation Guide: DII-0004 - PDF Format L
- ------------------------------------------------------------------------------------------------
PART C -ARM CORE SYNTHESIZABLE SOURCE
ARM966E-S CORE SYNTHESISABLE VHDL
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 24
25
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
- ------------------------------------------------------------------------------------------------
C1 AT200-MN-21100 ARM966E-S Synopsys Synthesisable VHDL C
AT200-MN-01002 Command Files for Synthesis of ARM966E-S VHDL from Specifiable
AT200-DE-14002 Library Command Files for Synthesis of ARM966E-S VHDL from
GTECH Library
- ------------------------------------------------------------------------------------------------
C2 AT200-DE-12001 ARM966E-S Synthesised Netlist on GTECH Library from VHDL Source C
- ------------------------------------------------------------------------------------------------
PART D -SYNTHESIZABLE FUNCTIONAL TEST VECTORS
ARM966E-S CORE TEST VECTORS
- ------------------------------------------------------------------------------------------------
D1 AT200-VE-01001 ARM966E-S Core Instruction Execution Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
D2 AT200-VE-01002 ARM966E-S Core Instruction Execution Vectors in WGL Format L
- ------------------------------------------------------------------------------------------------
D3 AT200-VE-05001 ARM966E-S Core Speed Characterisation Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
D4 AT200-VE-05002 ARM966E-S Core Speed Characterisation Vectors in WGL Format L
- ------------------------------------------------------------------------------------------------
PART E- TEST CHIP
ARM966E-S TEST CHIP DOCUMENTATION
- ------------------------------------------------------------------------------------------------
E1 AT201-DA-00001 ARM966E-S Test Chip Implementation Guide DXI-0115 C
- ------------------------------------------------------------------------------------------------
E2 AT201-DC-01*** ARM966E-S Test Chip Evaluation Report (*** Partner ref.) L
- ------------------------------------------------------------------------------------------------
PART F TEST CHIP SYNTHESIZABLE SOURCE
ARM966E-S TEST CHIP SYNTHESISABLE VHDL
- ------------------------------------------------------------------------------------------------
F1 AT200-MN-21100 ARM966E-S Test Chip Synopsys Synthesisable VHDL C
AT200-MN-01002 Command Files for Synthesis of ARM966E-S Test Chip VHDL
- ------------------------------------------------------------------------------------------------
PART G- TEST CHIP VALIDATION ENVIRONMENT
ARM966E-S TEST CHIP VALIDATION VHDL
- ------------------------------------------------------------------------------------------------
G1 AT201-MN-21101 ARM966E-S Test Chip VHDL Validation Environment C
- ------------------------------------------------------------------------------------------------
PART H- AVS
ARM966E-S TEST CHIP VALIDATION
- ------------------------------------------------------------------------------------------------
H1 AT201-VA-01002 ARM966E-S Test Chip Validation Suite Binaries C
- ------------------------------------------------------------------------------------------------
PART I- SYNTHESIZABLE TEST CHIP FUNCTIONAL TEST VECTORS
ARM966E-S TEST CHIP TEST VECTORS
- ------------------------------------------------------------------------------------------------
- ------------------------------------------------------------------------------------------------
I1 AT201-VE-01001 ARM966E-S Test Chip Instruction Execution Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
I2 AT201-VE-01002 ARM966E-S Test Chip Instruction Execution Vectors in WGL Format L
- ------------------------------------------------------------------------------------------------
I3 AT201-VE-05001 ARM966E-S Test Chip Speed Characterisation Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
I4 AT201-VE-05002 ARM966E-S Test Chip Speed Characterisation Vectors in WGL Format L
- ------------------------------------------------------------------------------------------------
I5 AT201-VE-05003 ARM966E-S Test Chip Power Characterisation Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
I6 AT201-VE-05004 ARM966E-S Test Chip Power Characterisation Vectors in WGL Format L
- ------------------------------------------------------------------------------------------------
PART J -VALIDATION HARDWARE
ARM966E-S VALIDATION HARDWARE
- ------------------------------------------------------------------------------------------------
J1 KPI-0055A ARM966E-S Test Chip Validation Kit C
- ------------------------------------------------------------------------------------------------
PART K -TEST
ARM966E-S CORE TEST PROGRAMS
- ------------------------------------------------------------------------------------------------
K1 AT200-VE-02001 ARM966E-S Instruction Execution Vectors Source C
- ------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 25
26
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
- ------------------------------------------------------------------------------------------------
K2 AT200-VE-07001 ARM966E-S Speed Characterisation Vectors Source C
- ------------------------------------------------------------------------------------------------
AT200-VE-09001 ARM966E-S Power Characterisation Vectors Source C
K3
- ------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 26
27
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SECTION 4
EMBEDDED TRACE MODULE (ETM9) TRANSFER MATERIALS
PART A
ETM9 PRODUCT SPECIFICATION
- ------------------------------------------------------------------------------------------------
A1 TM020-DA-03001 ETM Specification: IHI 0014 - pdf format N
- ------------------------------------------------------------------------------------------------
A2 TM020-DC-11001 Errata List - word format L
- ------------------------------------------------------------------------------------------------
A3 TM020-DC-02008 ETM9 Implementation Guide: DII 0002 - pdf format C
- ------------------------------------------------------------------------------------------------
A4 TM020-DA-03002 ETM9 Technical Reference Manual DDI 0157 - pdf format N
- ------------------------------------------------------------------------------------------------
PART B
ETM9 SYNTHESIZABLE VERILOG
- ------------------------------------------------------------------------------------------------
B1 TM020-MN-22100 ETM9 Synthesizable Verilog C
- ------------------------------------------------------------------------------------------------
B2 TM020-MN-01001 ETM9 Verilog Synthesis Command Files C
- ------------------------------------------------------------------------------------------------
PART C
ETM9 TEST AND VALIDATION
- ------------------------------------------------------------------------------------------------
C1 TM020-VE-01001 ETM9 Application Vectors in CRF Format L
- ------------------------------------------------------------------------------------------------
C2 TM020-VE-01002 ETM9 Application Vectors in .wgl format L
- ------------------------------------------------------------------------------------------------
C3 TM020-MN-22101 ETM9 Verilog Validation Environment (for ARM9E-S) C
- ------------------------------------------------------------------------------------------------
C4 TM020-VA-04001 ETM9 Validation Suite Binaries - Verilog C
- ------------------------------------------------------------------------------------------------
C5 TM020-SW-01001 Validation programs in source (assembler) L
- ------------------------------------------------------------------------------------------------
PART D
ETM9 SYNTHESIZED VERILOG ON GTECH LIBRARY
- ------------------------------------------------------------------------------------------------
D1 TM020-DE-14001 ETM9 Verilog GTECH Synthesis Command Files C
- ------------------------------------------------------------------------------------------------
D2 TM020-DE-15001 ETM9 Synthesized Netlist on GTECH Library from Verilog C
Source (includes small medium and large configurations)
- ------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 27
28
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 2
DELIVERY SCHEDULE
- ---------------------------------------------------------------------------------------------------
MATERIALS DELIVERY DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
TBD
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
GENERIC CORE TRANSFER MATERIALS
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 1 Part A Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 1 Part B Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 1 Part C Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ARM946E-S CORE TRANSFER MATERIALS
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part A Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part B Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part C Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part D Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part E Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part F Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part G Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part H Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part I Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part J Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part K Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ARM966E-S CORE TRANSFER MATERIALS
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part A Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part B Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part C Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part D Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part E Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part F Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part G Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part H Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part I Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part J Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 2 Part K Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ETM9 TRANSFER MATERIALS
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 3 Part A Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 3 Part B Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 3 Part C Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 3 Part D Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
Schedule 1 Section 3 Part E Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ARM946E-S CORE AND ARM966E-S CORE MODELS
- ---------------------------------------------------------------------------------------------------
Schedule 3 Section 1 Part A Within thirty (30) days of the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 28
29
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
- -------------------------------------------------------------------------------
ETM9 MODELS
- -------------------------------------------------------------------------------
Schedule 3 Section 2 Within thirty (30) days of the Effective Date
- -------------------------------------------------------------------------------
- -------------------------------------------------------------------------------
- -------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 29
30
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 3
MODELS
SECTION 1
PART A
ARM946E-S DESIGN SIGNOFF MODELS
The design signoff models are fully functional C models interfaced to the
specified HDL simulator. The models shall be pin, instruction, cycle and phase
accurate and model the full function of the ARM946E-S core. Each model shall be
validated by running the validation suite prior to release. Each model shall
also be delivered together with a CRF vector tester for the specified HDL
simulator environment.
ARM946E-S MODELS
Built In Timing Shell and SDF Timing Shell Models (Bundled)
- -------------------------------------------------------------------------------------------------
A1 AT210-MS-22602 Verilog HDL wrapped ARM946E-S Core Model Sun/Solaris N
- -------------------------------------------------------------------------------------------------
A2 AT210-MS-22603 Verilog HDL wrapped ARM946E-S Core Model HP-UX N
- -------------------------------------------------------------------------------------------------
ARM966E-S CORE
The design signoff models are fully functional C models interfaced to the
specified HDL simulator. The models shall be pin, instruction, cycle and phase
accurate and model the full function of the ARM966E-S core. Each model shall be
validated by running the validation suite prior to release. Each model shall
also be delivered together with a CRF vector tester for the specified HDL
simulator environment.
ARM966E-S MODELS
Built In Timing Shell and SDF Timing Shell Models (Bundled)
- -------------------------------------------------------------------------------------------------
A3 AT200-MS-22602 Verilog HDL wrapped ARM966E-S Core Model Sun/Solaris N
- -------------------------------------------------------------------------------------------------
A4 AT200-MS-22603 Verilog HDL wrapped ARM966E-S Core Model HP-UX N
- -------------------------------------------------------------------------------------------------
PART B
DESIGN SIMULATION MODEL OPTIONS FOR ARM946E-S CORE AND ARM966E-S CORE
Multiple model options exist for both the ARM946E-S Core and the ARM966E-S Core.
Each option consists of a bundle of models for use with a specific simulator.
Current supported platforms are Solaris and HP-UX. Current supported timing
formats are a simple C language format and Standard Delay Format (SDF). Note
that not all simulators fully support SDF timing format. Support for additional
platforms or timing formats introduced by ARM will automatically be included for
model options under maintenance.
Current Simulator Options:
1. Synopsys VSS
2. Synopsys VCS
3. IKOS Voyager
4. Mentor Graphics ModelSim VHDL
5. Mentor Graphics ModelSim Verilog
6. Cadence Verilog XL
7. Cadence Leapfrog
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 30
31
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
9. Cadence NC Verilog
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 31
32
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SECTION 2
PART A
ETM9 DESIGN SIGN OFF MODELS
Built In C and SDF Timing Shell Models (Bundled)
- -------------------------------------------------------------------------------------------------------
A1 TM020-MS-26602 Synopsys VCS ETM9 (small configuration) Design Sun/Solaris N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A2 TM020-MS-26605 Synopsys VCS ETM9 (small configuration) Design HP-UX N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A3 TM021-MS-26602 Synopsys VCS ETM9 (medium configuration) Design Sun/Solaris N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A4 TM021-MS-26605 Synopsys VCS ETM9 (medium configuration) Design HP-UX N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A5 TM022-MS-26602 Synopsys VCS ETM9 (large configuration) Design Sun/Solaris N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A6 TM022-MS-26605 Synopsys VCS ETM9 (large configuration) Design HP-UX N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A7 BST010-MS-26602 Synopsys VCS Boundary Scan Test Box Design Sun/Solaris N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A8 BST010-MS-26605 Synopsys VCS Boundary Scan Test Box Design HP-UX N
Simulation Model
- -------------------------------------------------------------------------------------------------------
A9 AT170-MS-26602 Synopsys VCS ARM9E-S Design Simulation Model Sun/Solaris N
- -------------------------------------------------------------------------------------------------------
A10 AT170-MS-26605 Synopsys VCS ARM9E-S Design Simulation Model HP-UX N
- -------------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 32
33
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 4
FORM OF SUBSIDIARY'S UNDERTAKING
Name of Subsidiary ___________________________
Address of Subsidiary ___________________________
___________________________
___________________________
___________________________
The undersigned has read and understood the terms and conditions of the
Technology License Agreement between ARM and LICENSEE dated ______________(the
"Agreement"). The Subsidiary hereby agrees to be bound by each and every term
and condition of the Agreement. The undersigned is duly authorized to execute
this undertaking for and on behalf of the Subsidiary.
Signed _________________________
Name _________________________
Title _________________________
Date _________________________
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 33
34
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 5
TRADEMARKS
-------------------------------------------------------
TRADEMARK REGISTERED/UNREGISTERED
-------------------------------------------------------
PART A
-------------------------------------------------------
ARM [logo] Exhibit A Registered
-------------------------------------------------------
PART B
-------------------------------------------------------
ARM POWERED [logo] Exhibit B Registered
-------------------------------------------------------
PART C
-------------------------------------------------------
ARM [logo] Exhibit C Registered
-------------------------------------------------------
PART D
-------------------------------------------------------
ARM Registered
-------------------------------------------------------
MULTIICE Registered
-------------------------------------------------------
ARM946E-S Unregistered
-------------------------------------------------------
ETM9 MACROCELL Unregistered
-------------------------------------------------------
Rules for Trademark Usage
1. ON DIE ENCAPSULATION
1.1 LICENSEE may apply the Trademark identified in PART A OF THIS SCHEDULE to
the die encapsulation of each unit of ARM Compliant Product.
1.2 This is intentionally blank.
1.3 Where LICENSEE is not directly distributing ARM Compliant Products (e.g.,
where ARM Compliant Products are distributed by LICENSEE's authorised
third party distributor), the die encapsulation of each unit of ARM
Compliant Product must bear a mark that unambiguously identifies LICENSEE
as the source of the ARM Compliant Product. If the die encapsulation
cannot accommodate LICENSEE's mark due to the reasons set forth in
Sections 1.2.1 - 1.2.3 above, then a prominent statement indicating that
LICENSEE is the source of the ARM Compliant Product (e.g., "distributed
under rights licensed from LICENSEE") must appear on all product
packaging, advertising material or promotional, technical or other
documentation, including press releases, associated with the ARM
Compliant Product. If the third party distributor refuses to identify
LICENSEE as the source of the ARM Compliant Product, then the third party
distributor may not identify ARM in any way with the ARM Compliant
Product it is distributing.
1.4 Except as agreed in writing by ARM, any application by LICENSEE of the
Trademark identified in Part A of this Schedule shall be in accordance
with the Trademark Use Guide set out in EXHIBIT A of this Schedule.
2. ON PRODUCT PACKAGING, DOCUMENTATION, AND COPY
2.1 ARM Powered Logo (Exhibit B)
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 34
35
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
2.1.1 LICENSEE SHALL apply the Trademark identified in PART B OF THIS
SCHEDULE to any product packaging, advertising material or
promotional, technical or other documentation for, or relating to,
any ARM Compliant Product distributed under license from ARM;
provided, however, that LICENSEE shall not be obliged to apply the
Trademark identified in PART B OF THIS SCHEDULE to product
packaging where such product packaging is generic to LICENSEE. For
the avoidance of doubt, LICENSEE shall apply the Trademark in PART
B OF THIS SCHEDULE to product packaging if such product packaging
contains any other company's mark or if such product packaging is
product-specific.
2.1.2 Any use or application by LICENSEE of the Trademark identified in
PART B OF THIS SCHEDULE shall be in accordance with; (i) the
Trademark Use Guide set out IN EXHIBIT B OF THIS SCHEDULE; and
(ii) with accepted trademark use standards.
2.2 ARM Logo (Exhibit C); Corporate Signature
2.2.1 Subject to the restriction in Section 2.6 of this Agreement,
LICENSEE MAY apply the Trademark identified in PART C OF THIS
SCHEDULE to any product packaging, advertising material or
promotional, technical or other documentation for, or relating to,
any product distributed by LICENSEE under license from ARM which
incorporates or takes into use any ARM technology or intellectual
property.
2.2.2 Any application of the Trademark identified in PART C OF THIS
SCHEDULE by LICENSEE shall be in accordance with; (i) the
Trademark Use Guide in EXHIBIT C OF THIS SCHEDULE; and (ii) with
accepted trademark use standards.
2.2.3 The Trademark identified in PART C OF THIS SCHEDULE may ONLY be
used separately and ONLY to identify ARM (including ARM Holdings
plc, its operating company ARM Limited, and the regional
subsidiaries, ARM, Inc.; ARM KK; and ARM Korea Limited) and may
NOT be incorporated into a body of text.
2.3 Other Trademarks
2.3.1 LICENSEE SHALL apply the appropriate Trademark from those
identified in PART D OF THIS SCHEDULE to any product packaging,
advertising material or promotional, technical or other
documentation relating to the respective product distributed by
LICENSEE under license from ARM; provided, however that LICENSEE
shall not be obliged to apply the Trademark identified in PART B
OF THIS SCHEDULE to product packaging where such product packaging
is generic to LICENSEE. For the avoidance of doubt, LICENSEE shall
apply the Trademark in PART B OF THIS SCHEDULE to product
packaging if such product packaging contains any other company's
mark or if such product packaging is product-specific.
2.3.2 Any use of the Trademarks identified in PART D OF THIS SCHEDULE by
LICENSEE shall be in accordance with accepted trademark use
standards including but not limited to the following;
(i) use of the Trademarks only in conjunction with a
generic term for the respective product (e.g. ARM
processor, where processor is the generic term); and
(ii) avoiding use of the Trademark, ARM, in the possessive
(e.g. ARM's processor).
3. ON WEBSITE
3.1 LICENSEE MAY apply the Trademarks identified in PART D OF THIS
SCHEDULE to the page(s) of LICENSEE's website relating to any ARM
Compliant Product distributed under license from ARM. Any use or
application by LICENSEE on its website of the Trademarks
identified in PART D OF THIS SCHEDULE shall be in accordance with:
(i) accepted trademark use standards; and (ii) the restrictions in
Section 2.3.2 above.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 35
36
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
3.2 LICENSEE MAY use the Trademark identified in PART C OF THIS
SCHEDULE to create a hyperlink between LICENSEE's website and the
primary page of ARM's website. Any use or application by LICENSEE
on its website of the Trademarks identified in Part D of this
Schedule shall be in accordance with; (i) the Trademark Use Guides
set out in EXHIBIT C OF THIS SCHEDULE; (ii) accepted trademark use
standards; and (iii) the restriction in Section 2.2.3 above.
3.3 LICENSEE SHALL apply the Trademark identified in PART B OF THIS
SCHEDULE to all LICENSEE web site pages referencing LICENSEE
products containing ARM Compliant Products.
4. Where any registered Trademark (as identified in Parts A through D of
this Schedule 5) is applied to any product packaging, advertising
material or promotional, technical or other documentation relating to any
product distributed under license from ARM, then for each prominent use
and the first use in any text of any such mark the mark must appear with
the symbol "(R)" at the upper right corner of the mark.
5. Where any unregistered Trademark (as identified in Parts A through D of
this Schedule 5) is applied to any product packaging, advertising
material and promotional, technical or other documentation relating to
the any product distributed under license from ARM, then for each
prominent use and the first use in any text of any such mark the mark
must appear with the symbol "TM" at the upper right corner of the mark.
6. LICENSEE shall include appropriate notices in substantially the following
form on any product packaging, advertising material and promotional,
technical or other documentation relating to any product distributed
under license from ARM;
For registered Trademarks
"[Cite Trademark(s)] is [are] the registered trademark(s) of ARM Limited.
For unregistered Trademarks
"[Cite Trademark(s)] is [are] the trademark(s) of ARM Limited.
7. ARM will provide its LICENSEE with camera ready and electronic artwork of
the Trademarks together with specific Pantone colour references. The
Trademarks must not be altered or modified in any way. The Trademarks may
be used in black and white or the exact colour reference identified in
the relevant Exhibit.
8. In addition to the rules set out above ARM may provide LICENSEE with
additional instructions relating to the use of the Trademarks from time
to time which LICENSEE shall follow in its use of the Trademarks.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 36
37
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
EXHIBIT A
TRADEMARK USE GUIDE
[ARM LOGO]
The mark must appear exactly as shown in this guide; the elements, proportions
and relationships must not change. The mark is available in stat repro form and
in .eps for Macintosh or .WMF for PC platforms. These formats ensure the highest
possible reproduction quality. However, should you need another format for a
specific project, please contact your local ARM office for advice.
When produced in colour, the mark should be printed in Pantone 314 blue. Process
colour reproduction may not match Pantone-identified solid colour standards.
When specifying the colour of the mark with process inks, the correct mix is:
CYAN 100
- --------------------------------------------------------------------------------
MAGENTA 0
- -------------------------------------------------------------------------------
YELLOW 8.5
- --------------------------------------------------------------------------------
BLACK 34
- --------------------------------------------------------------------------------
- - DO NOT ALTER OR DEFORM THE SHAPE OF THE MARK.
- - DO NOT REPLACE THE LOGOTYPE WITH A DIFFERENT TYPEFACE OR ATTEMPT TO MIMIC
THE LOGOTYPE TYPEFACE.
- - DO NOT PLACE COMPETING VISUAL ELEMENTS CLOSE TO THE MARK.
- - DO NOT SET TYPE NEAR TO THE MARK THAT COULD BE CONSTRUED AS A CORPORATE
SLOGAN OR MOTTO.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 37
38
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
EXHIBIT B
TRADEMARK USE GUIDE
[ARM LOGOS]
The mark must appear exactly as shown in this guide; the elements, proportions
and relationships must not change. The mark is available in stat repro form and
in .eps for Macintosh or .WMF for PC platforms. These formats ensure the highest
possible reproduction quality. However, should you need another format for a
specific project, please contact your local ARM office for advice.
When produced in colour, the mark should be printed in Pantone 314 blue. Process
colour reproduction may not match Pantone-identified solid colour standards.
When specifying the colour of the mark with process inks, the correct mix is:
CYAN 100
- --------------------------------------------------------------------------------
MAGENTA 0
- -------------------------------------------------------------------------------
YELLOW 8.5
- --------------------------------------------------------------------------------
BLACK 34
- --------------------------------------------------------------------------------
- - DO NOT ALTER OR DEFORM THE SHAPE OF THE MARK.
- - DO NOT REPLACE THE LOGOTYPE WITH A DIFFERENT TYPEFACE OR ATTEMPT TO MIMIC
THE LOGOTYPE TYPEFACE.
- - DO NOT PLACE COMPETING VISUAL ELEMENTS CLOSE TO THE MARK.
- - DO NOT SET TYPE NEAR TO THE MARK THAT COULD BE CONSTRUED AS A CORPORATE
SLOGAN OR MOTTO.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 38
39
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
EXHIBIT C
TRADEMARK USE GUIDE
[ARM LOGOS]
The mark must appear exactly as shown in this guide; the elements, proportions
and relationships must not change. The mark is available in stat repro form and
in .eps for Macintosh or .WMF for PC platforms. These formats ensure the highest
possible reproduction quality. However, should you need another format for a
specific project, please contact your local ARM office for advice.
When produced in colour, the mark should be printed in Pantone 314 blue. Process
colour reproduction may not match Pantone-identified solid colour standards.
When specifying the colour of the mark with process inks, the correct mix is:
CYAN 100
- --------------------------------------------------------------------------------
MAGENTA 0
- -------------------------------------------------------------------------------
YELLOW 8.5
- --------------------------------------------------------------------------------
BLACK 34
- --------------------------------------------------------------------------------
- - DO NOT ALTER OR DEFORM THE SHAPE OF THE MARK.
- - DO NOT REPLACE THE LOGOTYPE WITH A DIFFERENT TYPEFACE OR ATTEMPT TO MIMIC
THE LOGOTYPE TYPEFACE.
- - DO NOT PLACE COMPETING VISUAL ELEMENTS CLOSE TO THE MARK.
- - DO NOT SET TYPE NEAR TO THE MARK THAT COULD BE CONSTRUED AS A CORPORATE
SLOGAN OR MOTTO.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 39
40
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 6
RUNNING ROYALTY PAYMENT TERMS
Currency: US Dollars
Frequency: During the term of this Agreement, at the end of each Quarter
of each year in which Royalties are payable.
When due: Within thirty (30) days after the end of each Quarter,
LICENSEE shall deliver the Royalty Report by first class mail
or email and pay the Royalties.
What is due: Payment by telegraphic transfer to National Westminster Bank
PLC, 56 St. Andrews Street, Cambridge, CB2 3DA, UK.
Account name: ARM Limited
Account No: ***
Sort Code: ***
SWIFT code: ***
Royalty Report: Each Royalty Report shall contain no less information than is
set forth in Exhibit 1 to this Schedule 6.
Where sent: To the address for ARM set forth in this Agreement via first
class mail.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 40
41
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
EXHIBIT 1
FORM OF ROYALTY REPORT
PART A
CUMULATIVE SALES OF ARM CORES PER DESIGN
- ------------------------------------------------------------------------------------------------
ARM DESIGN VOLUME BREAK POINTS NUMBER OF ARM APPLICABLE
CORES PER DESIGN RATE
DISTRIBUTED
- ------------------------------------------------------------------------------------------------
- ------------------------------------------------------------------------------------------------
$XXX
- ------------------------------------------------------------------------------------------------
$XXX
- ------------------------------------------------------------------------------------------------
$XXX
- ------------------------------------------------------------------------------------------------
$XXX
- ------------------------------------------------------------------------------------------------
$XXX
- ------------------------------------------------------------------------------------------------
$XXX
- ------------------------------------------------------------------------------------------------
- ------------------------------------------------------------------------------------------------
TOTAL ROYALTY DUE $XXXXX
- ------------------------------------------------------------------------------------------------
PART B
During the term of this Agreement, LICENSEE shall, upon ARM's request,
discuss with ARM details of LICENSEE's product lines and product plans for the
following Quarter which are expected to incorporate any ARM Intellectual
Property. Such information shall be non-binding, supplied in good faith and
treated as Confidential Information of LICENSEE.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 41
42
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 7
SOFTWARE END USER LICENSE
MARVELL INTERNATIONAL LIMITED. ("LICENSEE") hereby grants and the END
USER hereby accepts a non transferable and non-exclusive license to use the
Software under the following terms and conditions:
1. Ownership. The Software is the property of LICENSEE and/or its licensors. The
END USER acquires no title, right or interest in the Software other than the
license rights granted herein.
2. Use. The END USER may use the Software on any one computer at one time except
that the Software may be executed from a common disc shared by multiple CPUs
provided that one authorized copy of the Software has been licensed from
LICENSEE for each CPU executing the Software. END USER shall not reverse
engineer, decompile or disassemble the Software, in whole or in part.
3. Copies. The END USER may make copies of the Software for back up and archival
purposes only. All copies of the Software must bear the same notice(s) contained
on the original copies supplied by LICENSEE.
4. Software Limited Warranty. LICENSEE warrants that the disks containing the
Software shall be free from defects and workmanship under normal use and the
programs will perform in accordance with the accompanying documentation for a
period of ninety (90) days from the date of delivery. Any written or oral
information or advice given by LICENSEE distributors, agents or employees will
in no way increase the scope of this warranty. LICENSEE's entire liability and
the END USER's exclusive remedy will be, at LICENSEE's sole option, to replace
the disk or to use LICENSEE's reasonable efforts to make the Software meet the
warranty set forth above. Any replacement Software will be warranted for the
remainder of the original warranty period or thirty (30) days, whichever is the
longer. The END USER agrees that the supply of the Software does not include
updates and upgrades, which may be available from LICENSEE under a separate
support agreement.
THE ABOVE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER
EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL LICENSEE BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ITS PERFORMANCE OR FAILURE TO
PERFORM UNDER THIS AGREEMENT OR THE FURNISHING, PERFORMANCE, OR USE OF ANY
SOFTWARE LICENSED HERETO, WHETHER DUE TO BREACH OF CONTRACT, BREACH OF WARRANTY,
OR NEGLIGENCE EVEN IF LICENSEE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
THE MAXIMUM LIABILITY OF LICENSEE SHALL BE LIMITED TO REFUND TO THE END
USER THE FEE PAID BY THE END USER FOR THE SOFTWARE.
5. Assignment of the Agreement. This Agreement and any license granted hereunder
to the END USER may not be assigned, sub-licensed or otherwise transferred by
the END USER to any third party without the prior written consent of LICENSEE.
Transfer to a U.S. government department or agency or to a prime or lower tier
contractor in connection with a U.S. government contract shall be made only upon
the prior written agreement to terms agreed by LICENSEE.
6. Terms and Termination. This Agreement and licenses granted hereunder may be
terminated forthwith by LICENSEE by written notice to the END USER in case of
(i) breach by the END USER of any provisions of this Agreement, and (ii)
non-payment by the END USER in due time of any sum due from the END USER in
consideration of delivery and license of this Software.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 42
43
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
Upon termination of this Agreement and of the license granted
hereunder, the END USER shall refrain from any further use of the
Software, and LICENSEE may request either the destruction of any copy of
the Software, in any form, in the possession of the END USER or the
return of the same to LICENSEE.
7. Applicability. The limitations and exclusions above may not apply in
certain countries or states where they conflict with local law. In cases
where such a conflict exists the local law shall prevail and the
remaining provisions of the Agreement shall remain in full force and
effect.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 43
44
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 8
PAYMENT SCHEDULE
All sums due in accordance with the provisions of this Schedule shall be payable
forty-five (45) days from receipt by LICENSEE of ARM's invoice therefor.
PART A
- ---------------------------------------------------------------------------------------------------
TECHNOLOGY LICENSE FEES PRICE US$ PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ARM946E-S CORE LICENSE FEE US$*** US$*** on Effective Date
- ---------------------------------------------------------------------------------------------------
US$*** on the first anniversary of the
Effective Date
- ---------------------------------------------------------------------------------------------------
US$*** on the second anniversary of the
Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ARM966E-S CORE LICENSE FEE US$*** US$*** on Effective Date
- ---------------------------------------------------------------------------------------------------
US$*** on the first anniversary of the
Effective Date
- ---------------------------------------------------------------------------------------------------
US$*** on the second anniversary of the
Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ETM9 MACROCELL LICENSE FEE US$*** US$*** on Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
PART B
- ---------------------------------------------------------------------------------------------------
MODEL OPTION FEE PRICE US$ PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Model Option Fee per additional US$*** With notice submitted in accordance
simulator specific Model. with Section 4.3.
- ---------------------------------------------------------------------------------------------------
PART C
- ---------------------------------------------------------------------------------------------------
ARM CORE MAINTENANCE FEE PRICE PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Core Maintenance Fee Year 1 US$*** On the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Core Maintenance Fee Year 2 US$*** On the first anniversary of the
Effective Date.
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
TBD On the second and each subsequent
Maintenance for subsequent anniversary of the Effective Date
years to be negotiated in good subject to request by LICENSEE.
faith between the parties
- ---------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 44
45
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
- ---------------------------------------------------------------------------------------------------
MACROCELL MAINTENANCE FEE PRICE PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
ETM9 MACROCELL
- ---------------------------------------------------------------------------------------------------
Maintenance Fee Year 1 US$*** On the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Maintenance Fee Year 2 US$*** On the first anniversary of the
Effective Date.
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Maintenance for subsequent years TBD On the second and each subsequent
to be negotiated in good faith anniversary of the Effective Date
between the parties subject to request by LICENSEE.
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
PART D
- ---------------------------------------------------------------------------------------------------
SOFTWARE MAINTENANCE FEE PRICE PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Fee for Year 1 US$*** On the Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Fee for Year 2 US$*** On the first anniversary of the
Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Fee for Year 3 US$*** On the second anniversary of the
Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Software Maintenance for TBD On the third and each subsequent
subsequent years to be anniversary of the Effective Date
negotiated in good faith subject to request by LICENSEE.
between the parties
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
PART E
- ---------------------------------------------------------------------------------------------------
SUPPORT FEES PRICE PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
ARM CORE
- ---------------------------------------------------------------------------------------------------
In respect of twenty (20) US$*** On the Effective Date
person days' support per annum
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
In respect of twenty (20) US$*** On the first anniversary of the
person days' support per annum Effective Date
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Support for subsequent years to be TBD On the second and each subsequent
negotiated in good faith between anniversary of the Effective Date
the parties subject to request by LICENSEE.
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
SUPPORT FEES PRICE PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
ETM9 MACROCELL
- ---------------------------------------------------------------------------------------------------
In respect of four (4) person US$*** On the Effective Date
days' support per annum
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
In respect of four (4) person US$*** On the first anniversary of the
days' support per annum Effective Date
- ---------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 45
46
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Support for subsequent years to be TBD On the second and each subsequent
negotiated in good faith between anniversary of the Effective Date
the parties subject to request by LICENSEE.
- ---------------------------------------------------------------------------------------------------
PART F
- ---------------------------------------------------------------------------------------------------
MODEL OPTION MAINTENANCE FEE PRICE US$ PAYMENT DUE DATE
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Model Option Maintenance Fee for US$*** Upon delivery of the Option Model
first (1st) year
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
Model Option Maintenance Fee for US$*** On first anniversary of delivery of
second (2nd) year the Option Model
- ---------------------------------------------------------------------------------------------------
- ---------------------------------------------------------------------------------------------------
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 46
47
23rd April 2001 CONFIDENTIAL LEX-TLA-1951-G
SCHEDULE 9
PROMOTIONAL OBLIGATIONS
1. ***
2. ***
3. ***
4. ARM and LICENSEE will each appoint and notify the other party of a
marketing contact and a technical contact within each organization.
5. ARM and LICENSEE will use reasonable efforts to generate sales materials
targeted at application areas mutually agreed by the parties.
6. Nothing in this Schedule 9 or this Agreement shall prevent or delay
LICENSEE from making public announcements concerning any products, design
wins or events that do not mention the use of ARM technology; provided
that LICENSEE meets its obligations set forth in this Schedule 9.
The confidential portions of this agreement omitted pursuant to a confidential
treatment request filed separately with the Securities and Exchange Commission
and are indicated by the symbol "***"
Page 47