SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Check One)
(X) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT
OF 1934 (FEE REQUIRED)
For the fiscal year ended March 31, 1996
OR
( ) TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934 (NO FEE REQUIRED)
Commission File No. 0-12695
INTEGRATED DEVICE TECHNOLOGY, INC.
(Exact name of registrant as specified in its charter)
Delaware 94-2669985
(State or other jurisdiction (I.R.S. Employer
of incorporation or organization) Identification No.)
2975 Stender Way,
Santa Clara, California 95054
(Address of principal executive offices) (Zip Code)
Registrant's telephone number, including area code: (408) 727-6116
Securities registered pursuant to Section 12(b) of the Act:
None
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, $.001 par value
5.5% Convertible Subordinated Notes due 2002
(Title of class)
Indicate by check mark whether the registrant (1) has filed all reports required
to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during
the preceding 12 months (or for such shorter period that the registrant was
required to file such reports), and (2) has been subject to such filing
requirements for the past 90 days.
Yes X No
----- -----
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K. (X)
The aggregate market value of the registrant's Common Stock held by
non-affiliates of the registrant was approximately $1,203,292,000 as of April
28, 1996, based upon the closing sale price of $15.50 per share on the Nasdaq
National Market for that date. Shares of Common Stock held by each executive
officer and director and by each person who owns 5% or more of the outstanding
Common Stock have been excluded in that such persons may be deemed affiliates.
This determination of affiliate status is not necessarily a conclusive
determination for other purposes.
There were 77,631,723 shares of the Registrant's Common Stock issued and
outstanding as of April 28, 1996.
DOCUMENTS INCORPORATED BY REFERENCE
Items 10, 11, 12, and 13 of Part III incorporate information by reference from
the 1996 Proxy Statement for the Annual Meeting of Stockholders to be held on
August 28, 1996.
1
ITEM 1. BUSINESS
Integrated Device Technology, Inc. "IDT" or "the Company" designs,
develops, manufactures and markets a broad range of high-performance
semiconductor products for the communications, desktop computer, office
automation and workstation/server markets using advanced CMOS (complimentary
metal oxide silicon) process technology. The Company focuses its development
efforts on providing proprietary and enhanced industry-standard products that
improve the performance of systems incorporating high-performance
microprocessors. The Company offers over 5,000 product configurations in four
product families: SRAM components and modules, specialty memory products, logic
circuits and RISC (reduced instruction set computers) microprocessors.
The Company markets its products on a worldwide basis primarily to OEMs
through a variety of channels, including a direct sales force, distributors and
independent sales representatives. The Company's end-user customers include
Alcatel, AT&T, Apple Computer, Bay Networks, Canon, Cisco Systems, Compaq
Computer, Dell Computer, Digital Equipment, FORE Systems, Hewlett Packard, IBM,
Intel, Motorola, NEC, Nokia, Olivetti, Siemens Nixdorf, Silicon Graphics, Sun
Microsystems and Tektronix. The Company attempts to differentiate itself from
competitors through unique architecture, enhanced system cost, performance, and
packaging options.
IDT was incorporated in California in 1980 and reincorporated in
Delaware in 1987. The terms "the Company" and "IDT" refer to Integrated Device
Technology, Inc. and its consolidated subsidiaries, unless the context indicates
otherwise.
PRODUCTS AND MARKETS
IDT offers over 5,000 product configurations in four product families:
SRAM components and modules, specialty memory products, logic circuits, and RISC
microprocessors. During fiscal 1996, these product families accounted for 46%,
27%, 17% and 10%, respectively, of total revenues of $679.5 million. The Company
markets its products primarily to OEMs in the communications, desktop computer,
office automation and workstation/server markets. IDT's product design efforts
are focused on proprietary components and integration of its components into
single devices, modules or subsystems to meet the needs of customers.
SRAMs. SRAMs are memory circuits used for storage and retrieval of data
during a computer system's operation. SRAMs do not require electrical
refreshment of the memory contents to ensure data integrity, allowing them to
operate at high speeds. SRAMs include substantially more circuitry than DRAMs,
resulting in higher production costs for a given amount of memory, and generally
command higher selling prices than the equivalent density traditional DRAM
products. The market for SRAMs is fragmented by differing demands for speed,
power, density, organization and packaging. As a result, there are a number of
niche markets for SRAMs.
The Company is focused primarily on the cache memory segment of the
SRAM market. The Company's SRAM product strategy is to offer high-performance 5
volt and 3.3 volt SRAM
2
components and modules that have differentiated features optimized to work with
specified microprocessors, such as Intel Pentium, PowerPC and MIPS RISC
microprocessors.
Cache memory provides intermediate storage between fast microprocessors
and relatively slow traditional DRAM main memory. Cache memory operates at the
speed of the microprocessor and increases the microprocessor's efficiency by
temporarily storing the most frequently used instructions and data. Special
cache tag SRAMs provide a look-up table that tells the cache controller which
blocks of data are currently stored in the cache SRAMs.
IDT is a leading supplier of cache SRAM components and modules to
personal computer manufacturers. The Company offers a range of cache SRAMs,
including burst-mode cache and cache tag SRAMs that support Intel and PowerPC
microprocessors. The Company's cache SRAM components are often integrated into
cache memory modules. These modules typically include a cache controller, cache
tag SRAM and cache SRAM components and are ready to plug into sockets on a
computer system's motherboard. IDT offers a series of standard and custom cache
memory modules for IBM and IBM-compatible PCs and PowerPC-based personal
computers as well as for certain RISC microprocessor-based systems.
The Company continues to develop its next generation SRAM products to
meet the growing cache memory needs of increasingly faster microprocessors.
IDT's new products are being designed to operate at higher speeds and provide
greater levels of integration.
In 1996, the Company announced Fusion Memory* technology, with
production scheduled to begin during fiscal 1997. Fusion Memory products use
DRAM technology and function with speed comparable to some SRAM products. DRAM
technology offers lower production costs than required to produce equivalent
density SRAM products. The Company believes that Fusion Memory products can
supplement the Company's existing SRAM product offerings and will be available
initially in a 1 Megabit product.
In order to provide SRAM products that meet the varying needs of its
customers, IDT uses CMOS process technology and offers 16K, 64K, 256K and 1
Megabit SRAMs in a number of speed, organization, power and packaging
configurations.
Specialty Memory Products. The Company's proprietary specialty memory
products include FIFOs and multi-port memories that offer high-performance
features which allow communications and computer systems to operate more
effectively. FIFOs are used as rate buffers to transfer large amounts of data at
high speeds between separate devices or pieces of equipment operating at
different speeds within a system. Multi-port memory products are used to speed
data transfers and act as the link between multiple microprocessors or between
microprocessors and peripherals when the order of the data to be transferred
needs to be controlled. These products are currently used primarily in
peripheral interface, communications and networking products, including bridges,
hubs, routers and switches.
*Fusion Memory is a trademark of Integrated Device Technology, Inc.
3
IDT is a leading supplier of both synchronous and asynchronous FIFOs
and has increasingly focused its resources on the design of synchronous FIFOs.
Synchronous FIFOs have been gaining greater market acceptance because they are
faster and provide an easier user interface. IDT's family of 9-bit SyncFIFOs are
being used in many newer networking products.
The Company is a leading supplier of multi-port memory products. IDT's
family of multi-port memories is composed primarily of dual-port asynchronous
devices. The Company also offers four-port products, a synchronous dual-port
device and a SARAM, that combines the flexibility of a multi-port product with
the ease of a FIFO.
In addition, the Company is developing a family of specialty memory
products for the emerging asynchronous transfer mode ("ATM") market. During
fiscal 1996, IDT announced and shipped revenue units of its first product for
the ATM market. The first member of this ATM family, a SAR (segmentation and
reassembly) chip, is a highly integrated, low cost interface device for ATM
network cards. Other members of the ATM family will include low-cost physical
media interface devices, as well as more highly-integrated SAR devices for ATM
networks.
Logic Circuits. IDT is a leading manufacturer of high-speed, byte-wide
and double-density 16-bit CMOS logic circuits for high-performance applications.
Logic circuits control data communication between various elements of electronic
systems, such as between a microprocessor and a memory circuit. IDT offers a
wide range of logic circuit products which support bus and backplane interfaces,
memory interfaces and other logic support applications where high-speed, low
power and high-output drive are critical. IDT's logic circuits are used in a
broad range of markets.
IDT's 16-bit logic products are available in small packages, enabling
board area to be reduced. These products are designed for new applications in
which small size, low power and extra low noise are as important as high speed.
IDT also supplies a series of 8-bit and 16-bit, 3.3 volt logic products and a
3.3 volt to 5 volt translator circuit directed at 3.3 volt systems in the
notebook and laptop computers and other markets. The Company also offers a
family of clock drivers and clock generators. These devices, placed at critical
positions in a system, correct the degradation of timing that occurs the further
the impulses travel from the main system clock.
RISC Microprocessor Components. IDT is a licensed manufacturer of MIPS
RISC microprocessors. IDT manufactures 32-bit and 64-bit MIPS microprocessors
and IDT derivative products for the communications, office automation,
workstation/server and desktop computer markets.
The Company focuses its RISC microprocessor marketing efforts primarily
on the embedded controller market. Embedded controllers are microprocessors that
control a single device such as a printer, copier or network router. The Company
sells several proprietary 32-bit embedded controllers, including devices with
on-circuit SRAM cache memory and floating point functions.
4
In 1996, the Company introduced the R5000, IDT's first 64-bit
superscalar microprocessor, which is available with clock speeds of up to 200
Mhz. In 1993, the Company introduced its ORION*R4600* microprocessor, which is
capable of clock speeds of up to 150 Mhz. The R5000 and R4600 are higher
performance derivatives of the 64-bit R4000 and R4400 microprocessors developed
by MIPS Computer Systems (MIPS). MIPS was acquired by Silicon Graphics (SGI) in
1992 and the R4000 and R4400 were introduced by the Company and other MIPS
licensees in 1992 and 1993, respectively. The R5000 was developed for SGI by
Quantum Effect Design, Inc. ("QED"), an affiliate of IDT. Through agreements
with SGI, IDT obtained a license to manufacture and sell the R5000. The R4600
was developed for the Company by QED. Systems based on the ORION family of
microprocessors are targeted at both embedded and desktop applications.
CUSTOMERS
The Company markets and sells its products primarily to OEMs in the
communications, desktop computer, office automation and workstation/server
markets. Customers often purchase products from more than one of the Company's
product families. In fiscal 1996, one OEM customer, Apple Computer Inc.,
accounted for 12 % of the Company's revenue. The following is an alphabetical
listing of current representative end-user customers of the Company, by market:
DESKTOP OFFICE WORKSTATION/
COMMUNICATIONS COMPUTER AUTOMATION SERVER
--------------- ------------ ----------------- -------------------
Alcatel Apple Computer Canon Digital Equipment
AT&T AST Research Electronics For Imaging EMC
Bay Networks Compaq Computer QMS NEC
Cabletron Dell Computer Samsung Siemens Nixdorf
Cisco Systems Gateway Computers Tektronix Silicon Graphics
Ericsson Groupe Bull Texas Instruments Sun Microsystems
FORE Systems Hewlett-Packard Toshiba
Fujitsu IBM Xerox
Motorola ICL
Nokia Intel
Siemens Olivetti
* R4600 and Orion are trademarks of Integrated Device Technology, Inc.
5
MARKETING AND SALES
IDT markets and sells its products primarily to OEMs through a variety
of channels, including a direct sales force, distributors and independent sales
representatives.
The Company had 77 direct sales personnel in the United States at March
31, 1996. Such personnel are located at the Company's headquarters and in 18
sales offices in Alabama, California, Colorado, Florida, Georgia, Illinois,
Maryland, Massachusetts, Minnesota, New Jersey, New York, North Carolina, Oregon
and Texas, and are primarily responsible for marketing and sales in those areas.
IDT also utilizes four national distributors, Hamilton Hallmark, Future
Electronics, Wyle Laboratories and Insight Electronics, Inc. and several
regional distributors in the United States. Hamilton Hallmark accounted for 11%,
13% and 15% of the Company's revenues in fiscal 1996, 1995 and 1994,
respectively. In addition, IDT uses independent sales representatives, which
generally take orders on an agency basis while the Company ships directly to the
customer. The representatives receive commissions on all products shipped to
customers in their geographic area.
The Company had 55 direct sales personnel and eleven sales offices
located outside of the United States at March 31, 1996. Sales activities outside
North America are generally controlled by IDT's subsidiaries located in France,
Germany, Hong Kong, Italy, Japan, Sweden and the United Kingdom. The Company
also has sales offices in Taiwan, Singapore and Israel. The Company continues to
emphasize its direct marketing efforts to OEMs in Europe and to United States
companies with operations in the Asia/Pacific area. A significant portion of
export sales, however, continues to be made through international distributors,
which tend not to carry inventory or carry significantly smaller levels compared
to domestic distributors. During fiscal 1994, 1995 and 1996, export sales
accounted for 32%, 39% and 40% of total revenues, respectively. Sales outside
the United States are generally denominated in local currencies. Sales and other
financial information for foreign operations is included in Note 12 of the
Consolidated Financial Statements contained elsewhere in this Form 10K. Export
sales are subject to certain risks, including currency controls and
fluctuations, changes in local economic conditions, import and export controls,
and changes in tax laws, tariffs and freight rates.
The Company's distributors typically maintain an inventory of a wide
variety of products, including products offered by IDT's competitors, and often
handle small or rush orders. Pursuant to distribution agreements, the Company
grants distributors the right to return slow-moving products for credit against
other products and offers protection to the distributors against inventory
obsolescence or price reductions. Revenue recognition of sales to distributors
is deferred until the products are resold by the distributor.
MANUFACTURING
IDT believes that maintaining its own wafer fabrication capability
facilitates the implementation of advanced process technologies and new
higher-performance product designs, provides it with a reliable source of supply
of semiconductors and allows it to be more flexible in shifting production
according to product demand. The Company currently operates sub-micron
6
wafer fabrication facilities in San Jose and Salinas, California, and is
currently qualifying for sale products fabricated in the new facility in
Hillsboro, Oregon. The Salinas facility, first placed in production in fiscal
1986, includes a 24,000 square foot, class 3 (less than three particles 0.5
micron or greater in size per cubic foot) six-inch wafer fabrication line. The
San Jose facility includes a 24,000 square foot, class 1 (less than one particle
0.5 micron or greater in size per cubic foot), six-inch wafer fabrication line
that was first placed in production in March 1991. Construction commenced on the
Oregon facility in August 1994 and was completed in 1996, and it is expected the
Oregon facility will contribute to revenues in fiscal 1997. The facility is
192,000 square feet and contains a 48,000 square foot, class 1, eight-inch wafer
fabrication line. The Company currently estimates that the cost to construct,
equip, and bring this facility to full production capacity, excluding assets
leased through the tax ownership lease transaction described in Note 7 of the
Consolidated Financial Statements, will be approximately $425 to $450 million.
Through March 31, 1996, excluding the tax ownership lease assets, the Company
has spent $150 million on the Oregon facility. The Company believes the
construction of the facility in Oregon reduces the Company's risk of a natural
disaster affecting all of its wafer fabrication facilities which, excluding the
Oregon facility, are all currently located in Northern California. If demand for
the Company's products does not fully utilize the additional capacity provided
by the Oregon facility, the incremental fixed costs and operating expenses may
materially adversely affect the Company's results of operations and financial
condition.
IDT also operates component assembly and test facilities which
aggregate 145,000 square feet in Penang, Malaysia. Substantially all of the
Company's test operations and a significant portion of its assembly operations
are performed at its Malaysian facility. IDT also uses subcontractors,
principally in Korea, the Philippines and Malaysia, to perform certain assembly
operations. If IDT were unable to assemble or test products offshore, or if air
transportation to these locations were curtailed, the Company's operations could
be materially adversely affected. Additionally, foreign manufacturing exposes
IDT to certain risks generally associated with doing business abroad, including
foreign governmental regulations, currency controls and fluctuation, changes in
local economic conditions and changes in tax rates, tariffs and freight rates.
In addition to this offshore assembly and test capability, the Company has the
capacity for low-volume, quick-turn assembly in Santa Clara as well as limited
test capability in Santa Clara, San Jose and Salinas. Assembly and test of
memory modules takes place both domestically and offshore.
The Company has been operating its wafer fabrication facilities in
Salinas and San Jose and its assembly operations in Malaysia at approximate
installed equipment capacity since fiscal 1994. To address its capacity
requirements, in fiscal 1996 the Company completed the conversion of its Salinas
wafer fabrication facility from five-inch to six-inch wafers. In late fiscal
1995, the Company acquired an interest in approximately 10 acres of land in the
Philippines and is constructing an assembly and test facility which initially
will be 176,000 square feet. Construction of the building is expected to be
completed in mid-fiscal 1997. The Company has the capability to expand to
accommodate growth. The Company estimates the costs to acquire the land,
construct the building and equip the facility in multiple phases will total
approximately $75 million in capital expenditures, of which approximately $21
million will be spent in fiscal 1997.
The Company faces a number of risks in order to accomplish its goals to
increase production in its existing plants and to construct, equip and commence
operations of the Oregon and Philippines
7
facilities. See "Management's Discussion and Analysis of Financial Condition and
Results of Operations."
The Company utilizes proprietary CMOS process technology permitting
sub-micron geometries. The majority of IDT's current products are manufactured
using its proprietary 0.65 micron processes, an increasing number are being
manufactured using the Company's new 0.5 micron processes and the Company is
currently developing several sub-0.5 micron CMOS processes.
Wafer fabrication involves a highly sophisticated, complex process that
is extremely sensitive to contamination. Integrated circuit manufacturing costs
are primarily determined by circuit size because the yield of good circuits per
wafer generally increases as a function of smaller die. Other factors affecting
costs include wafer size, number of process steps, costs and sophistication of
manufacturing equipment, packaging type, process complexity and cleanliness.
IDT's manufacturing process is complex, involving a number of steps including
wafer fabrication, plastic or ceramic packaging, burn-in and final test. The
Company continually makes changes to its manufacturing process to lower costs
and improve yields. From time to time the Company has experienced manufacturing
problems that have caused delays in shipments or increased costs. Manufacturing
problems with the new facility in Oregon or its existing wafer fabrication,
assembly or test facilities could materially adversely affect the Company's
results of operations.
The Company generally has been able to arrange for multiple sources of
raw materials, but the number of vendors capable of delivering certain raw
materials, such as silicon wafers, ultra-pure metals and certain chemicals and
gases is very limited. Some of the Company's packages, while not unique, have
very long lead times and are available from only a few suppliers. From time to
time vendors have extended lead times or limited supply to the Company due to
capacity constraints. These circumstances could reoccur and could materially
adversely affect IDT.
BACKLOG
IDT manufactures and markets primarily standard products. Sales are
generally made pursuant to purchase orders, which are frequently revised to
reflect changes in the customer's requirements. The Company has also entered
into master purchase agreements with many of its OEM customers. These agreements
do not require the OEMs to purchase minimum quantities of the Company's
products. Product deliveries are scheduled upon the Company's receipt of
purchase orders under the related OEM agreements. Generally, these purchase
orders and OEM agreements also allow customers to reschedule delivery dates and
cancel purchase orders without significant penalties. Orders are frequently
rescheduled, revised or canceled. In addition, distributor orders are subject to
price adjustments both prior to, and occasionally after shipment. For these
reasons, IDT believes that its backlog, while useful for scheduling production,
is not necessarily a reliable indicator of future revenues.
8
RESEARCH AND DEVELOPMENT
IDT's competitive position has been established, to a large extent,
through its emphasis on the development of proprietary and enhanced performance
industry-standard products, and the development of advanced CMOS processes. IDT
believes that its focus on continually advancing its process technologies has
allowed the Company to achieve cost reductions in the manufacture of most of its
products. The Company believes that a continued high level of research and
development expenditures is necessary to retain its competitive position. The
Company maintains research and development centers in Northern California,
Atlanta, Georgia, Austin, Texas and Morrisville, North Carolina. In addition,
the new plant start-up costs associated with the Oregon wafer fabrication
facility will significantly impact research and development expenditures in
fiscal 1997. Research and development expenditures are set out in the
Consolidated Statement of Operations in the Consolidated Financial Statements
and as a percentage of revenues were 20%, 19% and 19% in fiscal 1996, 1995 and
1994, respectively.
The Company's product development activities are focused on the design
of new circuits and modules that provide enhanced performance for growing
applications. In the SRAM family, IDT is utilizing its 5 volt and 3.3 volt SRAM
and subsystem design expertise to develop advanced SRAM cache memories and
modules for microcomputer systems based on Intel's Pentium, IBM and Motorola's
PowerPC, and SGI's MIPS RISC microprocessors. Additionally, the Company
continues its research into applications of Fusion Memory technology, with the
goal of expanding product offerings.
IDT's efforts in the specialty memory products area are concentrated on
the development for the communications market of advanced synchronous FIFOs and
more sophisticated multi-port memory products. In fiscal 1996, the Company
continued its efforts to develop a family of specialty memory products for the
emerging ATM market and a family of lower voltage logic devices for a broad
range of applications. The Company is emphasizing the design of RISC
microprocessors for embedded control applications, such as printers and
telecommunications switches. The Company also continues to refine its CMOS
process technology to increase the speed and density of circuits in order to
provide customers with advanced products at competitive prices, thus enhancing
their competitive positions. The Company continues to refine its CMOS process
technology focusing on sub-0.5 micron geometry processes and converting the
production of many products to newer generation processes.
In fiscal 1992, the Company purchased an equity interest in QED, a
newly formed corporation. Pursuant to a development agreement between QED and
the Company, QED developed the ORION R4600 microprocessor for IDT. QED also
designed the R5000 for SGI, and through agreements with SGI, IDT obtained a
license to manufacture and sell the R5000. The R5000 is targeted at 3-D
visualization, internetworking and office automation applications. Except for
the R5000, the Company owns such products, subject to the payment of royalties
and other fees to QED and SGI. IDT has licensed Toshiba and NKK to manufacture
and market certain of these products. With respect to the R5000, SGI owns the
intellectual property rights. There can be no assurance that QED will continue
to design products for the Company or be successful in developing such products.
9
In addition, the Company is engaged in the development of microprocessors for
use in general applications at its research center in Austin Texas.
COMPETITION
The semiconductor industry is intensely competitive and is
characterized by rapid technological advances, cyclical market patterns, price
erosion, evolving industry standards, occasional shortages of materials,
intellectual property disputes, high capital equipment costs and availability
and control of manufacturing capacity. Many of the Company's competitors have
substantially greater technical, marketing, manufacturing and financial
resources than IDT. In addition, several foreign competitors receive assistance
from their governments in the form of research and development loans and grants
and reduced capital costs, which could give them a competitive advantage. The
Company competes in different product areas, to varying degrees, on the basis of
technical innovation and performance of its products, as well as quality, price
and product availability.
IDT's competitive strategy is to differentiate its products through
high-performance, innovative configurations and proprietary features or to offer
industry-standard products with higher speeds or lower power consumption. Price
competition, introductions of new products by IDT's competitors, delays in
product introductions by IDT or other competitive factors could have a material
adverse effect on the Company in the future.
INTELLECTUAL PROPERTY AND LICENSING
IDT has obtained 64 patents in the United States and 18 abroad and has
95 inventions in various stages of the patent application process, 86 of which
are in the United States. The Company intends to continue to increase the scope
of its patents. The Company also relies on trade secret, copyright and trademark
laws to protect its products, and a number of the Company's circuit designs are
registered pursuant to the Semiconductor Chip Protection Act of 1984. This Act
gives protection similar to copyright protection for the patterns which appear
on integrated circuits and prohibits competitors from making photographic copies
of such circuits. There can be no assurance that any patents issued to the
Company will not be challenged, invalidated or circumvented, that the rights
granted thereunder will provide competitive advantages to the Company, or that
the Company's efforts generally to protect its intellectual property rights will
be successful.
In recent years, there has been a growing trend of companies to resort
to litigation to protect their semiconductor technology from unauthorized use by
others. The Company in the past has been involved in patent litigation which
adversely affected its operating results. Although the Company has obtained
patent licenses from certain semiconductor manufacturers, the Company does not
have licenses from a number of semiconductor manufacturers who have a broad
portfolio of patents. IDT has been notified that it may be infringing patents
issued to certain semiconductor manufacturers and other parties, and is
currently involved in several license negotiations. There can be no assurance
that additional claims alleging infringement of intellectual property rights,
including infringement of patents that have been or may be issued in the future,
will not be made against the Company in the future or that licenses, to the
extent required, will be available. Should licenses
10
from any such claimant be unavailable, or not be available on terms acceptable
to the Company, the Company may be required to discontinue its use of certain
processes or the manufacture, use and sale of certain of its products, to incur
significant litigation costs and damages, or to develop noninfringing
technology. If IDT is unable to obtain any necessary licenses, pass any
increased cost of patent licenses on to its customers or develop noninfringing
technology, the Company could be materially adversely affected. In addition, IDT
has received patent licenses from several companies that expire over time, and
the failure to renew or renegotiate certain of these licenses as they expire or
significant increases in amounts payable under these licenses could have an
adverse effect on the Company.
On May 1, 1992, IDT and AT&T entered into a five-year royalty-free
patent cross-license agreement. As part of this agreement, patent litigation
instituted by AT&T was settled and dismissed. Under the agreement, IDT made a
lump sum payment and issued shares of its Common Stock to AT&T, granted a
discount on future purchases, and gave credit for future purchases of technology
on a nonexclusive basis. In December 1995, the agreement with AT&T was modified
to reflect AT&T's restructure into three legal entities, extend the agreement
for five years beyond the original expiration date and other agreed-upon
changes. On December 10, 1992, IDT and Texas Instruments ("TI") entered into a
five-year patent cross-license agreement. As part of this agreement, patent
litigation instituted by TI was dismissed. Under the agreement, IDT granted to
TI a license to certain IDT technology and products and guaranteed that TI will
realize certain revenues from the licensed technology and products, and IDT will
develop certain products which will be manufactured and sold by both IDT and TI.
See Note 5 of Notes to Consolidated Financial Statements.
ENVIRONMENTAL REGULATION
Federal, State and local provisions have been enacted regulating the
discharge and disposal into the environment of certain materials used in the
semiconductor manufacturing process. The Company's manufacturing facilities are
designed to comply with existing regulations, and the Company believes that its
activities conform to present regulations. The Company has been conducting its
operations with all necessary permits, and without material adverse impact
attributable to environmental regulation. However, there can be no assurance
that future additions or changes to environmental regulations will not impose
upon the Company the requirement for significant capital expenditure. Further,
any failure by the Company to control the use of, or to restrict adequately the
discharge of hazardous materials under present or future regulations could
subject it to substantial liability or could cause its manufacturing operations
to be suspended. In addition, IDT could be held financially responsible for
remedial measures if its properties were found to be contaminated whether or not
the Company was responsible for such contamination.
EMPLOYEES
At March 31, 1996, IDT and its subsidiaries employed 3,828 people
worldwide, of whom 1,389 were in Penang. IDT's success depends in part on its
ability to attract and retain qualified personnel, who are generally in great
demand. Since its founding, the Company has implemented policies enabling its
employees to share in IDT's success. Examples are stock option, stock purchase,
profit sharing and special bonus plans for key contributors. IDT has never had a
work stoppage; no employees are represented by a collective bargaining
agreement; and the Company considers its employee relations to be good.
11
ITEM 2. PROPERTIES
The Company presently occupies eight major facilities in California,
Oregon and Malaysia:
LOCATION FACILITY USE SQUARE FEET
--------- ------------- ------------
Salinas Wafer fabrication, SRAM and multiport 98,000
memory operations
Santa Clara Logic operation 62,000
Santa Clara Administration and RISC microprocessor 43,700
operations
Santa Clara Administration and other 50,000
operations
Santa Clara Administration ` 48,300
Penang, Malaysia Assembly and test 145,000
San Jose Wafer fabrication, process technology 135,000
development, FIFO and memory subsystems
operations, and research and development
Oregon Wafer fabrication 192,000
The Company leases its Salinas facility from Carl E. Berg, a director,
under a lease expiring in 2005 and in October 1994 purchased a 5.5 acre parcel
adjacent to its Salinas facility for $653,000 from Mr. Berg. IDT recently
entered into an agreement with Mr. Berg to acquire the Salinas facility in a
transaction structured as a tax free reorganization. IDT leases its Santa Clara
facilities under leases expiring in 1999 through 2015, including renewal
options. The Oregon facility is subject to a tax ownership operating lease.
Additional information about leased properties, including the purchase of the
Salinas facility, is provided in Note 7 of the Consolidated Financial
Statements. The Company owns its Malaysian and San Jose facilities, although the
Malaysian facilities are subject to long-term ground leases, and the San Jose
facility is subject to a mortgage. IDT leases offices for its sales force in 18
domestic locations as well as Edinburgh, Hong Kong, London, Milan, Munich,
Paris, Singapore, Stockholm, Taipei, Tel Aviv and Tokyo. IDT leases offices for
its design centers in Georgia, North Carolina and Texas. In late fiscal 1995,
the Company acquired an interest in approximately 10 acres of land in the
Philippines, and construction has commenced on a 176,000 square foot assembly
and test facility, which may be expanded in the future.
12
ITEM 3. LEGAL PROCEEDINGS
There are no material pending legal proceedings, other than ordinary
routine litigation incidental to the business, to which the Registrant or any of
its subsidiaries is a party or of which any of their property is subject.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
No matters were submitted to a vote of the Company's security holders
during the last quarter of the fiscal year ended March 31, 1996.
ITEM 4A. EXECUTIVE OFFICERS OF THE REGISTRANT
The executive officers of the Company, and their respective ages as of April
30,1996 are as follows:
Name Age Position
----- --- --------
D. John Carey 59 Chairman of the Board
Leonard C. Perham 52 President & Chief Executive Officer
William B. Cortelyou 40 Vice President, Wafer Operations
Robin H. Hodge 56 Vice President, Assembly and Test
Alan H. Huggins 43 Vice President, Memory Division
Daniel L. Lewis 47 Vice President, Sales
Chuen-Der Lien 40 Vice President, Research and
Development, Chief
Technology Officer
Jack Menache 52 Vice President, General Counsel and
Secretary
Richard R. Picard 48 Vice President, Logic and Microprocessor
Products
Robert Phillips 51 Vice President, Manufacturing
William D. Snyder 51 Vice President, Finance and Chief
Financial Officer
Mr. Carey was elected to the Board of Directors in 1980 and has been
Chairman of the Board since 1982. He served as Chief Executive Officer from 1982
until his resignation in April 1991 and was President from 1982 until 1986. Mr.
Carey was a founder of Advanced Micro Devices ("AMD") in 1969 and was an
executive officer there until 1978.
Mr. Perham joined IDT in October 1983 as Vice President and General
Manager, SRAM Division. In October 1986, Mr. Perham was appointed President and
Chief Operating Officer and a director of the Company. In April 1991, Mr. Perham
was elected Chief Executive Officer. Prior to joining IDT, Mr. Perham held
executive positions at Optical Information Systems Incorporated and Zilog Inc.
13
Mr. Cortelyou joined IDT in 1982. In January 1990, he was elected Vice
President, Wafer Operations, Salinas. Mr. Cortelyou currently serves as Vice
President, Wafer Operations. Prior to joining IDT, Mr. Cortelyou was an engineer
at AMD.
Mr. Hodge joined IDT as Director of Assembly Operations in March 1989.
In January 1990, Mr. Hodge was elected Vice President, Assembly Operations. Mr.
Hodge currently serves as Vice President, Assembly and Test. From 1983 until
joining IDT, Mr. Hodge was Director of Assembly Operations for Maxim Integrated
Products.
Mr. Huggins joined IDT in 1983 and was elected Vice President in 1987.
Mr. Huggins currently serves as Vice President, Memory Division. Prior to
joining the Company, Mr. Huggins held various engineering positions at AMD.
Effective May 15, 1996, Mr. Huggins resigned as an executive officer.
Mr. Lewis joined IDT in 1984 as Eastern Area Sales Manager. In June
1991, he was elected Vice President, Sales. Prior to joining IDT, Mr. Lewis held
management positions at Avatar Technologies, Inc., Data General and Zilog.
Dr. Lien joined IDT in 1987 and was elected Vice President, Technology
Development in April 1992 and was elected Vice President, Research and
Development, Chief Technology Officer in 1996. Prior to joining the Company, he
held engineering positions at Digital Equipment Corporation and AMD.
Mr. Menache joined IDT as Vice President, General Counsel and Secretary
in September 1989. From April 1989 until joining IDT, he was General Counsel of
Berg & Berg Developers. From 1986 until April 1989, he was Vice President,
General Counsel and Secretary of The Wollongong Group Inc.
Mr. Picard joined IDT in 1985. In 1989 he was elected Vice President,
Static RAM Product Line. In April 1990 he was appointed Vice President and
General Manager, Logic Products. He was elected Vice President, Logic and
Microprocessor Products in May 1993. Prior to joining IDT, Mr. Picard held
management positions at International Micro Circuits, Zilog and AMD.
Mr. Phillips joined IDT in March 1995 as Vice President, Manufacturing.
Prior to joining IDT, Mr. Phillips was Vice President of Fab, Assembly and Test
Operations at Vitesse Semiconductor and Edsun Labs, and was President of PMT
Manufacturing Technology, Inc.
Mr. Snyder joined the Company as Treasurer in 1985. In May 1990, he was
elected Vice President, Corporate Controller, and in September 1990 Mr. Snyder
was elected Vice President, Finance and Chief Financial Officer. Prior to
joining the Company, Mr. Snyder held financial management positions at Actrix
Computer, Zilog and Digital Equipment Corporation.
14
ITEM 5. MARKET FOR REGISTRANT'S COMMON STOCK AND RELATED
STOCKHOLDER MATTERS
Price Range of Common Stock
The Common Stock of the Company is traded on The Nasdaq National Market under
the symbol "IDTI". The following table sets forth the high and low last reported
sales prices for the Common Stock as reported by the Nasdaq National Market
during the fiscal quarters indicated:
HIGH LOW
-------------------------------------
Fiscal 1996:
First Quarter 25 1/16 18 1/32
Second Quarter 33 1/4 22 9/16
Third Quarter 24 3/8 12 7/8
Fourth Quarter 14 7/8 9 1/4
Fiscal 1995:
First Quarter 15 11/16 11 15/16
Second Quarter 14 7/16 8 1/8
Third Quarter 15 1/32 9 1/4
Fourth Quarter 20 3/8 14 3/16
In August, 1995, the Company announced a two-for-one stock split in the form of
a stock dividend for stockholders of record on August 25, 1995. The distribution
of additional shares was on September 15, 1995. Price information for all
periods presented has been retroactively adjusted to reflect this stock
dividend.
As of April 28, 1996, there were approximately 1,427 record holders of the
Common Stock.
The Company intends to retain any future earnings for use in its business and,
accordingly, does not anticipate paying any cash dividends on its Common Stock
in the foreseeable future.
15
ITEM 6. SELECTED FINANCIAL DATA
The data set forth below are qualified in their entirety by reference to, and
should be read in conjunction with, "Management's Discussion and Analysis of
Financial Condition and Results of Operations" and the Consolidated Financial
Statements and related notes thereto included elsewhere in this Form 10-K.
FISCAL YEAR ENDED
------------------------------
MARCH 31, APRIL 2, APRIL 3, MARCH 28, MARCH 29,
1996 1995 1994 1993 1992 (1)
------------------------------------------------------------------------------
(In thousands, except per share data)
STATEMENT OF OPERATIONS DATA
Revenues $ 679,497 $ 422,190 $ 330,462 $ 236,263 $ 202,734
Income (loss) before
extraordinary item $ 118,249 $ 78,302 $ 40,165 $ 5,336 ($32,808)
Net income (loss) $ 120,170 $ 78,302 $ 40,165 $ 5,336 ($32,808)
Primary earnings per share:
Income before extraordinary item $ 1.44 $ 1.05 $ 0.61 $ 0.09 ($0.62)
Net income $ 1.47 $ 1.05 $ 0.61 $ 0.09 ($0.62)
Fully diluted earnings per share:
Income before extraordinary item $ 1.42 $ 1.04 $ 0.60 $ 0.09 ($0.62)
Net income $ 1.44 $ 1.04 $ 0.60 $ 0.09 ($0.62)
Shares used in computing
net income (loss) per share:
Primary 81,897 74,765 66,232 59,402 52,510
Fully diluted 87,753 75,426 67,260 59,402 52,510
BALANCE SHEET DATA
Total assets $ 939,434 $ 561,975 $ 349,571 $ 239,994 $ 229,730
Long-term obligations,
excluding current portion $ 36,682 $ 36,595 $ 37,462 $ 48,987 $ 53,050
Convertible subordinated notes,
net of issuance costs $ 182,558
Stockholders' equity $ 549,727 $ 414,531 $ 224,367 $ 117,760 $ 104,602
Research & development expenses $ 133,317 $ 78,376 $ 64,237 $ 53,461 $ 52,044
Number of employees 3,828 2,965 2,615 2,414 2,159
<FN>
(1) In fiscal 1992, the Company recorded restructuring and other charges of
$24.8 million.
</FN>
16
ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION
AND RESULTS OF OPERATIONS
The following table sets forth certain amounts, as a percentage of
revenues, from the Company's consolidated statements of operations for the three
fiscal years ended March 31, 1996, April 2, 1995 and April 3, 1994.
FISCAL YEAR ENDED
MARCH 31, APRIL 2, APRIL 3,
1996 1995 1994
-------------------------------
Revenues 100.0% 100.0% 100.0%
Cost of revenues 43.2 42.5 48.3
-------------------------------
Gross profit 56.8 57.5 51.7
-------------------------------
Operating expenses:
Research and development 19.6 18.6 19.4
Selling, general and administrative 13.1 15.3 16.5
-------------------------------
Total operating expenses 32.7 33.9 35.9
-------------------------------
Operating income 24.1 23.6 15.8
Net interest income 1.5 1.2 (0.6)
-------------------------------
Income before provision for income taxes 25.6 24.8 15.2
Provision for income taxes 8.2 6.2 3.0
Income before extraordinary item 17.4 18.6 12.2
-------------------------------
Extraordinary item:
Gain from early extinguishment of debt,
net of tax 0.3 -- --
-------------------------------
Net income 17.7% 18.6% 12.2%
===============================
17
Overview
Revenues were $679.5 million in fiscal 1996, a 61% increase over fiscal
1995 of $422.2 million and a 106% increase over fiscal 1994 of $330.5 million.
Net income was $1.44 per fully diluted share in fiscal 1996 compared to $1.04 in
fiscal 1995 and $0.60 in fiscal 1994. During fiscal 1996, IDT made significant
progress in increasing capacity in Penang, Malaysia, completed the conversion of
the Salinas wafer facility from five-inch to six-inch wafers, started
construction of a new assembly and test facility in the Philippines and
completed construction of the Hillsboro, Oregon wafer facility. The Oregon
facility is expected to ship its first revenue units in the first quarter of
fiscal 1997.
Both revenues and profits were affected dramatically by a volatile
market for the Company's largest product line, SRAMs, which accounted for 46% of
IDT's total fiscal 1996 revenue. For the first two quarters of the fiscal year,
SRAMs were in great demand and prices rose. At the same time, through die
shrinks and better utilization of manufacturing capacity, IDT reduced costs of
production resulting in record operating margins despite startup costs
associated with the new Oregon plant. During the latter part of the year, SRAM
pricing began to fall significantly as a number of competitors, particularly
Taiwanese, shifted capacity to SRAMs. Shortly thereafter, demand for high speed
SRAMs by personal computer (PC) manufacturers slowed. The SRAM order rate
declined further as certain customers not only reduced SRAM order rates, but
also sold off excess SRAM inventory at low prices causing excess supply. As an
example of the market conditions, in less than six months, selling prices for
new orders on the industry-standard 3.3 volt 32Kx8 SRAM declined by as much as
80% from the peak. Consequently, while revenues and earnings grew sequentially
in the first three quarters of fiscal 1996, fourth quarter earnings and revenue
dropped significantly from the immediately preceding quarter and fourth quarter
earnings decreased compared to the same period in the prior year.
Results of Operations
Revenues of $679.5 million were achieved in fiscal 1996 through a
combination of improved selling prices on SRAM products shipped during the first
three quarters, higher output as the Company increased die production and
generally increased demand across all of IDT's other products. SRAM revenues
increased 90.3% to $315.4 million compared to fiscal 1995. Fiscal 1995 revenue
increased 28% over fiscal 1994 due to strong demand for fast SRAMs for secondary
cache requirements in the PC market. Looking forward, the Company does not
expect demand in the PC market will resume last year's growth rates, and is
uncertain as to whether pricing for commodity SRAMs will change.
Gross profit increased 59% to $385.8 million in fiscal 1996 when
compared to fiscal 1995 and 126% over the gross profit reported in fiscal 1994.
However, as a result of significant price declines on SRAM orders taken in the
second half of the year, IDT's gross profit as a percentage of revenue declined
to 56.8% in fiscal 1996 compared to 57.5% in fiscal 1995. Gross profit as a
percentage of revenue was 51.7% in fiscal 1994. While gross profit as a
percentage of revenue for the first three quarters of fiscal 1996 was not
appreciably different from the prior year, the fourth quarter declined to 54.3%.
Some markets such as telecommunications and datacommunications remained robust
throughout the year, but falling prices and orders in the PC market offset
strong performance for the remainder of the Company's market segments in the
third and fourth quarters. Costs associated with
18
the Hillsboro, Oregon plant are expected to negatively impact gross margins in
fiscal 1997, while that plant is on a ramp to increase production. IDT's policy
is to expense new plant startup costs to research and development (R & D)
expense until a facility is ready to begin commercial production. In fiscal 1996
substantially all Oregon plant expenses, amounting to $ 18.5 million, were
charged to R & D expense, but as that plant reaches production status in fiscal
1997, an increasingly significant portion of the total costs will be allocated
to cost of goods sold, based upon activities performed.
R & D expenses increased 70% to $133.3 million in fiscal 1996 as
compared to $78.4 million in fiscal 1995, and $64.2 million in fiscal 1994. As a
percentage of revenue, R & D expense was 19.6% of fiscal 1996 revenue, an
increase from 18.6% in fiscal 1995. R & D expenses had been 19.4% of fiscal 1994
revenue. The increase in 1996 can be principally attributed to process
engineering research costs of approximately $18.5 million relative to the new
Oregon wafer fabrication plant. Other R & D activities included development of
sub 0.5 micron processes, the release of 20 new products, including IDT's first
product for the ATM (asynchronous transfer mode) market, the SAR (segmentation
and reassembly) chip, and further development and design of new products and
processes. The Company expects the startup of the new Oregon facility to
continue to impact R & D expense in fiscal 1997 but that total R & D expense as
a percentage of revenue will be reduced compared to fiscal 1996. IDT believes
that high levels of R & D investment is required to support its strategy of
providing products to its customers which are not readily available from
competitors.
Selling, general and administrative (S, G & A) expenses increased 37%
to $88.8 million in fiscal 1996, as compared to $64.6 million in fiscal 1995. As
a percentage of revenues, S, G & A expenses declined to 13.1% of fiscal 1996
revenue compared to 15.3% of fiscal 1995 revenue. Fiscal 1994 S, G & A expenses
were $54.3 million or 16.5% of revenue. The 1996 increase in S, G & A expenses
can be attributed to higher variable selling expenses associated with the
year-over-year revenue growth of 61%, increases in employee profit sharing and
management bonuses, increases in sales personnel and increases in provisions for
bad debts. In 1997, IDT plans to install an enterprise-wide management
information system and anticipates that S, G & A expenses will remain constant
as a percentage of revenues.
Interest expense was $9.3 million in fiscal 1996 as compared to $3.3
million and $5.2 million in fiscal years 1995 and 1994, respectively. Interest
expense increased in 1996 primarily due to the issuance of $201.3 million of 5
1/2% convertible subordinated notes issued in the first quarter of the fiscal
year. 1996 gross interest expense of $12.3 million was reduced by $3.0 million
in connection with capitalization of construction period interest for the Oregon
wafer fabrication plant. Despite retiring $15 million of the 5 1/2% convertible
subordinated notes in the fourth quarter resulting in an extraordinary gain (see
Note 5 of the Consolidated Financial Statements), interest expense is expected
to be higher in fiscal 1997, as the notes were not outstanding for all of fiscal
1996. Furthermore, interest capitalization will cease when the Oregon facility
is placed in production.
Interest income and other, net, increased to $19.4 million in fiscal
1996 compared to $8.2 million and $3.1 million in fiscal years 1995 and 1994,
respectively. The increase in interest income was due primarily to the
investment of higher cash balances from the proceeds of the issuance of $201.25
million of subordinated notes in the first quarter of fiscal 1996. Fiscal 1995
had been impacted favorably by a $97.6 million equity offering. As the Company
continues to pay cash for
19
substantial capital equipment acquisitions, less cash will be available for
investment, resulting in lower interest income in fiscal 1997.
The effective tax rates for fiscal 1996, 1995 and 1994 of 32%, 25% and
20%, respectively, differed from the US statutory rate of 35% primarily due to
earnings of foreign subsidiaries being taxed at lower rates, and the utilization
of certain tax credits. The Company has consumed substantially all of the tax
benefits associated with its Malaysian subsidiary, and it has fully utilized
carried forward R&D tax credits.
The Company accounts for its stock option plans and its employee stock
purchase plan in accordance with provisions of the Accounting Principles Board's
Opinion No. 25 (APB 25), "Accounting for Stock Issued to Employees." In 1995 the
Financial Accounting Standards Board released the Statement of Financial
Accounting Standard No. 123 (SFAS 123), "Accounting for Stock Based
Compensation." While SFAS 123 provides an alternative to APB 25 and is effective
for fiscal years beginning after December 15, 1995, as permitted by SFAS 123,
the Company intends to continue to account for its employee stock plans in
accordance with APB 25. Consequently, SFAS 123 is not expected to have any
material impact on IDT's financial condition or results of operations.
Liquidity and Capital Resources
IDT's financial condition improved during fiscal 1996. Cash and
cash-equivalents and short term investments increased from $221.6 million at the
end of 1995 to $261.3 million at the end of 1996. Working capital increased from
$261.2 million to $286.2 million despite substantial cash investments in plant,
property and equipment. These increases were a result of improved profitability
as well as the issuance of the 5 1/2% convertible subordinated notes.
Additionally the Company has $67.8 million of cash classified as other assets,
which are pledged as security relative to the operating lease for the Oregon
facility. As of March 31, 1996, the Company had $5.4 million available under
unsecured lines of credit, all of which are overseas. See Note 6 of Notes to
Consolidated Financial Statements.
During fiscal 1996, 1995 and 1994 cash flow from operations was $200.9
million, $115.8 million and $100.1 million, respectively. Improved operating
results in fiscal 1995 and 1996 was the largest single factor affecting cash
flow from operations. Other factors contributing to greater cash flow from
operations include increases in accounts payable and other current liabilities.
See the Consolidated Statements of Cash Flows in the Consolidated Financial
Statements. IDT expects that increased depreciation expenses associated with its
recent and forecasted capital expenditures will be significant relative to
future cash flows from operations.
During fiscal 1996, 1995 and 1994 the Company's net cash used in
investing activities was $359.3 million, $163.2 million and $68.9 million,
respectively, of which $287.5 million, $94.7 million and $37.4 million,
respectively, was used for capital equipment and property and plant
improvements. In fiscal 1996, $57.3 million was used to collateralize the Oregon
facility lease. In fiscal 1994, financing activities generated $34.8 million,
the primary source of which was an equity offering which resulted in net cash of
$46.8 million. In fiscal 1995, financing activities generated $89.2 million, the
primary source of which was an equity offering in December 1994 which resulted
in net cash of $97.6
20
million. In fiscal 1996, financing activities generated $185.4 million, the
primary source of which was the issuance of convertible subordinated debt (see
Note 5 of the Consolidated Financial Statements) which resulted in net cash of
$196.7 million.
In view of current and anticipated capacity requirements, IDT
anticipates capital expenditures of approximately $255 million in fiscal 1997,
principally in connection with continued installation of equipment in the new
Oregon facility plus the construction and partial equipping of the new
Philippine plant and other capacity improvements.
Looking forward, the Company believes that existing cash balances, cash
flow from operations, existing credit facilities and other financing
arrangements that are available will be sufficient to fund its anticipated
capital expenditures and working capital needs through fiscal 1997. If the
Company is required to seek other financing sooner, the unavailability of
financing on terms satisfactory to IDT could have a material adverse effect on
the Company.
Factors Affecting Future Results
Except for the historical information contained in this Annual Report
on Form 10-K, the matters discussed in this report are forward looking
statements. These forward looking statements concern matters that involve risks
and uncertainties, including but not limited to those set forth below, that
could cause actual results to differ materially from those projected in the
forward looking statements. In any event, the matters set forth below should be
carefully considered when evaluating the Company's business and prospects.
IDT's operating results have been, and in the future may be, subject to
fluctuations due to a wide variety of factors including the timing of or delays
in new product and process technology announcements and introductions by the
Company or its competitors, competitive pricing pressures, particularly in the
SRAM memory market, fluctuations in manufacturing yields, changes in the mix of
product sold, availability and costs of raw materials, the cyclical nature of
the semiconductor industry, industry-wide wafer processing capacity, economic
conditions in various geographic areas, and costs associated with other events,
such as underutilization or expansion of production capacity, intellectual
property disputes, or other litigation. Further, there can be no assurance that
the Company will be able to compete successfully in the future against existing
or potential competitors or that the Companies operating results will not be
adversely affected by increased price competition.
The semiconductor industry is highly cyclical and has been subject to
significant downturns at various times that have been characterized by
diminished product demand, production overcapacity and accelerated erosion of
average selling prices. During the past year, markets for some of the Company's
SRAMs were characterized by excess demand relative to supply and the resulting
favorable pricing. During the later part of fiscal 1996, a number of companies,
principally foreign, shifted manufacturing capacity to SRAMs causing rapid
adjustments to supply and consequently impacting market prices. The resulting
significant downward trend in prices in an extremely short period negatively
affected SRAM gross margins, and adversely affected the Company's operating
results. A material increase in industry-wide production capacity, shift in
industry capacity toward products competitive with the Company's products,
reduced demand or other factors could result in a
21
rapid decline in product pricing and could also materially adversely affect the
Company's operating results.
The Company ships a substantial portion of its quarterly sales in the
last month of a quarter. If anticipated shipments in any quarter do not occur,
the Company's operating results for that quarter could be adversely affected. In
addition, a substantial percentage of the Company's products are incorporated
into computer and computer-related products, which have historically been
characterized by significant fluctuations in demand. Furthermore, any decline in
the demand for advanced microprocessors which utilize SRAM cache memory could
adversely affect the Company's operating results. In addition, demand for
certain of the Company's products is dependent upon growth in the communications
market. Any slowdown in the computer and related peripherals or communications
markets could also materially adversely affect the Company's operating results.
The Company is operating its domestic wafer fabrication facilities and
Malaysian assembly operations at approximately installed equipment capacity. As
a result, the Company has utilized subcontractors for the majority of its
incremental assembly requirements, typically at higher costs that its own
Malaysian operations. The Company expects to continue utilizing subcontractors
extensively until it opens its Philippines assembly plant. At times during
fiscal 1996, as a result of production capacity constraints, the Company was not
able to take advantage of all market opportunities presented to it. Due to long
production lead times and current capacity constraints, any failure by the
Company to forecast adequately the mix of product demand could adversely affect
the Company's sales and operating results. To address its capacity requirements,
during the past year, the Company has undertaken extensive production expansion
programs including the construction of an eight-inch wafer fabrication line in
Oregon and an assembly and test facility in the Philippines. These expansion
programs face a number of substantial risks including, but not limited to,
delays in construction, cost overruns, equipment delays or shortages,
manufacturing start-up or process problems or difficulties in hiring key
managers and technical personnel. In addition, the Company has never operated an
eight-inch wafer fabrication facility. Accordingly, the Company could incur
unanticipated process or production problems. From time to time, the Company has
experienced production difficulties that have caused delivery delays and quality
problems. There can be no assurance that the Company will not experience
manufacturing problems and product delivery delays in the future as a result of,
among other things, changes to its process technologies, ramping production,
installing new equipment at its facilities and constructing new facilities in
Oregon and the Philippines. Further, the Company's existing wafer fabrication
facilities are located relatively near each other in Northern California. If the
Company were unable to use these facilities, as a result of a natural disaster
or otherwise, the Company's operations would be materially adversely affected
until the Company was able to obtain other production capability.
The Company's capacity additions will result in a significant increase
in fixed and operating expenses. Historically, the Company has expensed the
operating expenses associated with bringing a new fabrication facility to
commercial production as R&D in the period such expenses are incurred. However,
as commercial production at a new fabrication facility commences, the operating
costs will be classified as cost of revenues, and the Company will begin to
recognize depreciation expense relating to the facility. Accordingly, although
the Company expects the Oregon fabrication facility to contribute to revenues in
fiscal 1997, the Company will recognize substantial operating expenses
22
associated with the facility in 1997, which could reduce gross margins.
Specifically, as commercial production begins in fiscal 1997, the Company
anticipates incurring substantial operating costs and depreciation expense
relating to the facility before production of substantial volume is achieved.
Accordingly, if revenue levels do not increase sufficiently to offset these
additional expense levels, or if the Company is unable to achieve gross margins
from products produced at the Oregon facility that are comparable to the
Company's current products, the Company's future results of operations could be
adversely impacted.
New products, process technology and start-up costs associated with the
Oregon wafer fabrication facility continue to require significant research and
development expenditures. However, there can be no assurance that the Company
will be able to develop and introduce new products in a timely manner, that new
products will gain market acceptance or that new process technologies can be
successfully implemented. If the Company is unable to develop new products in a
timely manner, and to sell them at gross margins comparable to the Company's
current products, the future results of operations could be adversely impacted.
The Company's manufacturing operations depend upon obtaining adequate
raw materials on a timely basis. The number of vendors of certain raw materials,
such as silicon wafers, ultra-pure metals and certain chemicals and gases, is
very limited. In addition, certain packages used by the Company require long
lead times and are available from only a few suppliers. From time to time,
vendors have extended lead times or limited supply to the Company due to
capacity constraints. The Company's results of operations would be adversely
affected if it were unable to obtain adequate supplies of raw materials in a
timely manner or if there were significant increases in the costs of raw
materials.
The semiconductor industry is extremely capital-intensive. To remain
competitive, the Company must continue to invest in advanced manufacturing and
test equipment. In fiscal 1997, the Company expects to expend approximately $255
million in capital expenditures and anticipates significant continuing capital
expenditures in the next several years. There can be no assurance that the
Company will not be required to seek financing to satisfy its cash and capital
needs or that such financing will be available on terms satisfactory to the
Company. If such financing is required and if such financing is not available on
terms satisfactory to the Company, its operations would be materially adversely
affected.
The semiconductor industry is characterized by vigorous protection and
pursuit of intellectual property rights or positions, which have resulted in
significant and often protracted and expensive litigation. In recent years,
there has been a growing trend of companies to resort to litigation to protect
their semiconductor technology from unauthorized use by others. The Company in
the past has been involved in patent litigation, which adversely affected its
operating results. Although the Company has obtained patent licenses from
certain semiconductor manufacturers, the Company does not have licenses from a
number of semiconductor manufacturers who have a broad portfolio of patents. The
Company has been notified that it may be infringing patents issued to certain
semiconductor manufacturers and other parties and is currently involved in
several license negotiations. There can be no assurance that additional claims
alleging infringement of intellectual property rights will not be asserted in
the future. The intellectual property claims that have been made or may be
asserted against the Company could require that the Company discontinue the use
of certain processes or cease the manufacture, use and sale of infringing
products, to incur significant litigation costs and damages and to develop
noninfringing technology. There can be no assurance that the Company would be
able to obtain such licenses on acceptable terms or to develop noninfringing
technology. Further, the failure to renew or renegotiate existing licenses, or
significant increases in amounts payable or the inability to obtain a license,
could have a materially adverse effect on the Company.
A substantial percentage of the Company's revenues are derived from
export sales, which are generally denominated in local currencies. The Company's
offshore assembly and test operations and export sales are subject to risks
associated with foreign operations, including currency controls and
fluctuations, changes in local economic conditions and import and export
controls, as well as changes in tax laws, tariffs and freight rates. Recently,
contract pricing for raw materials, as well as for subcontract assembly
services, has been impacted by currency exchange rate fluctuations.
23
The Company is subject to a variety of regulations related to hazardous
materials used in its manufacturing process. Any failure by the Company to
control the use of, or to restrict adequately the discharge of, hazardous
materials under present or future regulations could subject it to substantial
liability or could cause its manufacturing operations to be suspended.
The Company's Common Stock has experienced substantial price volatility
and such volatility may occur in the future, particularly as a result of
quarter-to-quarter variations in the actual or anticipated financial results of
the Company, the companies in the semiconductor industry or in the markets
served by the Company, or announcements by the Company or its competitors
regarding new product introductions. In addition, the stock market has
experienced extreme price and volume fluctuations that have affected the market
price of many technology companies' stock in particular. These factors may
adversely affect the price of the Common Stock.
24
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY FINANCIAL
INFORMATION
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND FINANCIAL STATEMENT SCHEDULES
COVERED BY REPORT OF INDEPENDENT ACCOUNTANTS
Consolidated Financial Statements included in Item 8:
Report of Independent Accountants
Consolidated Balance Sheets at March 31, 1996 and April 2, 1995
Consolidated Statements of Operations for each of the three fiscal years in the
period ended March 31, 1996
Consolidated Statements of Cash Flows for each of the three fiscal years in the
period ended March 31, 1996
Consolidated Statements of Stockholder's Equity for each of the three fiscal
years in the period ended March 31, 1996
Notes to Consolidated Financial Statements
Financial Statement Schedule II - Valuation and Qualifying Accounts and Reserves
All other schedules have been omitted since the required information is not
present or is not present in amounts sufficient to require submission of the
schedules, or because the information required is included in the consolidated
financial statements or notes thereto.
REPORT OF INDEPENDENT ACCOUNTANTS
To the Stockholders and Board of Directors of Integrated Device Technology, Inc.
In our opinion, the consolidated financial statements listed in the
accompanying index present fairly, in all material respects, the financial
position of Integrated Device Technology, Inc. and its subsidiaries at March 31,
1996 and April 2, 1995 and the results of their operations and their cash flows
for each of the three years in the period ended March 31, 1996, in conformity
with generally accepted accounting principles. These financial statements are
the responsibility of the Company's management; our responsibility is to express
an opinion on these financial statements based on our audits. We conducted our
audits of these statements in accordance with generally accepted auditing
standards which require that we plan and perform the audit to obtain reasonable
assurance about whether the financial statements are free of material
misstatement. An audit includes examining, on a test basis, evidence supporting
the amounts and disclosures in the financial statements, assessing the
accounting principles used and significant estimates made by management, and
evaluating the overall financial statement presentation. We believe that our
audits provide a reasonable basis for the opinion expressed above.
PRICE WATERHOUSE LLP
San Jose, California
April 19, 1996
25
INTEGRATED DEVICE TECHNOLOGY, INC.
CONSOLIDATED BALANCE SHEETS
(In thousands, except share amounts)
March 31, 1996 April 2, 1995
---------------------------------------
ASSETS
Current assets:
Cash and cash equivalents $157,228 $130,211
Short-term investments 104,046 91,425
Accounts receivable, net of allowance for returns and 85,026 71,974
doubtful accounts of $4,580 and $ 3,830
Inventory 46,630 37,459
Deferred tax assets 38,712 24,923
Prepayments and other current assets 15,658 8,533
---------------------------------------
Total current assets 447,300 364,525
Property, plant and equipment, net 415,214 178,780
Other assets 76,920 18,670
---------------------------------------
TOTAL ASSETS $939,434 $561,975
=======================================
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
Accounts payable $78,821 $39,814
Accrued compensation and related expense 29,237 22,889
Deferred income on shipments to distributors 31,325 22,348
Income taxes payable 5,747 1,716
Other accrued liabilities 12,171 10,609
Current portion of long term obligations 3,799 5,903
---------------------------------------
Total current liabilities 161,100 103,279
Convertible subordinated notes, net of issuance cost 182,558 ------
---------------------------------------
Long term obligations 36,682 36,595
---------------------------------------
Deferred tax liabilities 9,367 7,570
---------------------------------------
Commitments and Contingencies
Stockholders' equity:
Preferred stock;$.001 par value:
10,000,000 shares authorized; no shares issued
Common stock; $.001 par value: 200,000,000
shares authorized; 77,496,833 and
76,209,268 shares issued and outstanding 77 76
Additional paid-in capital 287,064 271,580
Retained earnings 262,989 142,819
Unrealized gain on available-for-sale securities, net 102 ------
Cumulative translation adjustment (505) 56
---------------------------------------
Total stockholders' equity 549,727 414,531
---------------------------------------
TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY $939,434 $561,975
=======================================
<FN>
The accompanying notes are an integral part of these financial statements.
</FN>
26
INTEGRATED DEVICE TECHNOLOGY, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
FISCAL YEAR ENDED
-----------------------
MARCH 31, APRIL 2, APRIL 3,
1996 1995 1994
----------------------------------------------------------
Revenues $679,497 $422,190 $330,462
Cost of revenues 293,695 179,652 159,627
----------------------------------------------------------
Gross profit 385,802 242,538 170,835
----------------------------------------------------------
Operating expenses:
Research and development 133,317 78,376 64,237
Selling, general and administrative 88,752 64,647 54,329
----------------------------------------------------------
Total operating expenses 222,069 143,023 118,566
----------------------------------------------------------
Operating income 163,733 99,515 52,269
Interest expense (9,269) (3,298) (5,165)
Interest income and other, net 19,432 8,186 3,102
----------------------------------------------------------
Income before provision for income taxes 173,896 104,403 50,206
Provision for income taxes 55,647 26,101 10,041
----------------------------------------------------------
Income before extraordinary item 118,249 78,302 40,165
Extraordinary item:
Gain from early extinguishment of debt (net of
tax provision of $904) 1,921
----------------------------------------------------------
Net income $120,170 $78,302 $40,165
==========================================================
Primary earnings per share:
Income before extraordinary item $1.44 $1.05 $0.61
==========================================================
Net income $1.47 $1.05 $0.61
==========================================================
Fully diluted earnings per share:
Income before extraordinary item $1.42 $1.04 $0.60
==========================================================
Net income $1.44 $1.04 $0.60
==========================================================
Weighted average shares of common stock
and common stock equivalents:
Primary 81,897 74,765 66,232
==========================================================
Fully diluted 87,753 75,426 67,260
==========================================================
<FN>
The accompanying notes are an integral part of these financial statements.
</FN>
27
INTEGRATED DEVICE TECHNOLOGY, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
FISCAL YEAR ENDED
-----------------------------
MARCH 31, APRIL 2, APRIL 3,
1996 1995 1994
-------------------------------------------------
Operating activities:
Net income $120,170 $78,302 $40,165
Adjustments:
Depreciation and amortization 53,782 38,816 37,594
Provision for losses on accounts receivable 2,536 299 476
Gain from early extinguishment of debt (1,921)
Changes in assets and liabilities:
Accounts receivable (14,456) (31,630) 2,071
Inventory (9,171) (7,604) (2,618)
Deferred tax assets (7,719) 3,081 (10,897)
Other assets (12,514) (6,226) (1,247)
Accounts payable 39,651 23,889 106
Accrued compensation and related expense 6,348 6,361 9,799
Deferred income on shipments to distributors 8,977 4,756 7,142
Income taxes payable 12,004 7,605 11,574
Other accrued liabilities 3,228 (1,846) 5,885
-------------------------------------------------
Net cash provided by operating activities 200,915 115,803 100,050
-------------------------------------------------
Investing activities:
Purchases of property, plant and equipment (287,491) (94,717) (37,412)
Purchases of short-term investments (215,097) (96,499) (40,221)
Proceeds from sales of short-term investments 200,618 38,425 8,747
Purchases of investments collateralizing
facility lease (57,333) (10,449)
-------------------------------------------------
Net cash used for investing activities (359,303) (163,240) (68,886)
-------------------------------------------------
Financing activities:
Issuance of common stock, net 6,608 103,549 55,337
Proceeds from issuance of convertible subordinated
notes, net of issuance costs 196,721
Proceeds from borrowings 2,731
Payment on capital leases and early extinguishment of
convertible subordinated notes (17,924) (14,391) (23,271)
-------------------------------------------------
Net cash provided by financing activities 185,405 89,158 34,797
-------------------------------------------------
Net increase in cash and cash equivalents 27,017 41,721 65,961
Cash and cash equivalents at beginning of period 130,211 88,490 22,529
-------------------------------------------------
Cash and cash equivalents at end of period $157,228 $130,211 $88,490
=================================================
Supplemental disclosure of cash flow information:
Interest paid $7,457 $2,698 $4,713
Income taxes paid 54,616 13,901 9,163
<FN>
The accompanying notes are an integral part of these financial statements.
</FN>
28
INTEGRATED DEVICE TECHNOLOGY, INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
(In thousands, except share data)
ADDITIONAL CUMULATIVE UNREALIZED TOTAL
COMMON STOCK PAID-IN RETAINED TRANSLATION GAIN ON STOCKHOLDERS'
SHARES AMOUNT CAPITAL EARNINGS ADJUSTMENT SECURITIES, NET EQUITY
-------------------------------------------------------------------------------------
Balance, March 28, 1993 56,755,442 $ 56 $ 93,703 $24,352 $ (351) $ - $ 117,760
Issuance of common stock 4,055,662 4 9,239 9,243
Issuance of common stock at $7.855 per
share, pursuant to public offering, net
of expenses of $366 6,000,000 6 46,758 46,764
Tax benefits of stock option transactions 10,488 10,488
Translation adjustment (53) (53)
Net income 40,165 40,165
-------------------------------------------------------------------------------------
Balance, April 3, 1994 66,811,104 66 160,188 64,517 (404) - 224,367
Issuance of common stock 1,778,164 2 5,986 5,988
Issuance of common stock at $12.8375 per
share, pursuant to public offering, net
of expenses of $261 7,620,000 8 97,553 97,561
Tax benefits of stock option transactions 7,853 7,853
Translation adjustment 460 460
Net income 78,302 78,302
-------------------------------------------------------------------------------------
Balance, April 2, 1995 76,209,268 76 271,580 142,819 56 - 414,531
Issuance of common stock 1,287,565 1 6,607 6,608
Tax benefits of stock option transactions 8,877 8,877
Translation adjustment (561) (561)
Unrealized gain on available-for-sale
securities, net 102 102
Net income 120,170 120,170
-------------------------------------------------------------------------------------
Balance, March 31, 1996 77,496,833 $ 77 $287,064 $262,989 $ (505) $ 102 $549,727
=====================================================================================
<FN>
The accompanying notes are an integral part of these financial statements.
</FN>
29
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
NOTE 1--SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Fiscal Year. The Company's fiscal year ends on the Sunday nearest March 31.
Fiscal years 1995 and 1996 each included 52 weeks. The fiscal year ended April
3, 1994 was a 53-week year. The fiscal year-end of certain of the Company's
foreign subsidiaries is March 31, and the results of their operations as of
their fiscal year end have been combined with the Company's. Transactions during
the intervening period in 1995 and 1994 were not significant.
Consolidation. The consolidated financial statements include the accounts of
Integrated Device Technology, Inc. (IDT or the Company) and its majority-owned
subsidiaries. All significant intercompany accounts and transactions have been
eliminated.
Cash, Cash Equivalents and Short-term Investments. Cash equivalents are highly
liquid investments with original maturities of three months or less at the time
of acquisition or with guaranteed on-demand buy-back provisions. Short-term
investments are valued at amortized cost, which approximates market.
The Company's investments are classified as available-for-sale as of March 31,
1996 and April 2, 1995. Investment securities classified as available-for-sale
are measured at market value and net unrealized gains or losses are recorded as
a separate component of stockholders' equity until realized. Any gains or losses
on sales of investments are computed based upon specific identification. As of
March 31, 1996, gross realized and unrealized gains and losses on investments
available for sale were not material. Management determines the appropriate
classification of debt and equity securities at the time of purchase and
reevaluates the classification at each reporting date.
Available-for Sale Securities
(in thousands) March 31, 1996 April 2, 1995
------------------------------
U.S.Government agency securities $ 47,096 $ 25,813
State and local governments 142,933 94,345
Corporate securities 56,898 73,160
Others 10,969 8,215
------------ -----------
Total debt and equity securities 257,896 201,533
Less cash equivalents (153,850) (110,108)
------------ -----------
Short-term investments $ 104,046 $ 91,425
============ ============
Short-term investments of $65,992,000 mature in less than one year and
$38,054,000 have maturities between one and four years.
30
Inventory. Inventory is stated at the lower of standard cost (which approximates
actual cost on a first-in, first-out basis) or market. Market is based upon
estimated realizable value reduced by normal gross margin. Inventory at March
31, 1996 and April 2, 1995 was:
(in thousands) March 31, 1996 April 2, 1995
------------------------------
Raw materials $ 5,171 $ 4,404
Work-in-process 22,538 16,977
Finished goods 18,921 16,078
------- ---------
$46,630 $ 37,459
======= =========
Property, Plant and Equipment. Property, plant and equipment are stated at cost.
Depreciation is computed for property, plant and equipment using the
straight-line method over estimated useful lives of the assets. Leasehold
improvements and leasehold interests are amortized over the shorter of the
estimated useful lives of the assets or the remaining term of the lease.
Accelerated methods of depreciation are used for tax computations. Property,
plant and equipment at March 31, 1996 and April 2, 1995 were:
(in thousands) March 31, 1996 April 2, 1995
------------------------------
Land $ 11,920 $ 6,076
Machinery and equipment 585,011 332,680
Building and leasehold improvements 48,820 40,576
Construction-in-progress 15,167 5,553
---------- ----------
660,918 384,885
Less accumulated depreciation and amortization (245,704) (206,105)
---------- ----------
$ 415,214 $ 178,780
========== ==========
Revenue Recognition. Revenue from product sales is generally recognized upon
shipment and a reserve is provided for estimated returns and discounts. A
portion of the Company's sales is made to distributors under agreements which
allow certain rights of return and price protection on products unsold by the
distributors. Related gross profits thereon are deferred until the products are
resold by the distributors.
Income Taxes. The Company accounts for income tax in accordance with a liability
approach.
Net Income Per Share. Primary net income per common share is computed using the
weighted average number of common shares and the dilutive effects of common
stock equivalent shares outstanding during the period. Common stock equivalent
shares include shares issuable under the Company's stock option plans. Fully
diluted net income per share is computed by adjusting the primary shares
outstanding and net income for the potential effect of the conversion of the
5.5% Convertible Subordinated Notes (Note 5) outstanding during the period and
the elimination of the related interest and deferred issue costs (net of income
taxes).
31
Translation of Foreign Currencies. Accounts denominated in foreign currencies
have been translated in accordance with SFAS 52. The functional currency for the
Company's sales operations is the applicable local currency, with the exception
of the Hong Kong sales subsidiary whose functional currency is the U.S. dollar.
For subsidiaries whose functional currency is the local currency, gains and
losses resulting from translation of these foreign currency financial statements
into U.S. dollars are accumulated in a separate component of stockholders'
equity. For the Malaysian and Philippines manufacturing subsidiaries and the
Hong Kong sales subsidiary, where the functional currency is the U.S. dollar,
gains and losses resulting from the process of remeasuring foreign currency
financial statements into U.S. dollars are included in income. The effect of
foreign currency exchange rate fluctuations have not been material.
Fair Value Disclosures of Financial Instruments. Fair values of cash and cash
equivalents, short-term investments and short-term debt approximate cost due to
the short period of time until maturity. Fair values of long-term investments,
long-term debt and currency forward contracts are based on quoted market prices
or pricing models using current market rates.
Concentration of Credit Risk and Off-Balance-Sheet Risk. The Company markets
high-speed integrated circuits to OEMs and distributors primarily in the United
States, Europe and the Far East. The Company performs on-going credit
evaluations of its customers' financial condition and limits the amount of
credit extended when deemed necessary but generally does not require collateral.
Management believes that any risk of loss is significantly reduced due to the
diversity of its products, customers and geographic sales areas. The Company
maintains a provision for potential credit losses, and write-offs of accounts
receivable were insignificant in each of the three years ended March 31, 1996.
One distributor's receivable balance represented 10% and 6% of total accounts
receivable at March 31, 1996, and April 2, 1995, respectively. One OEM's
receivable represented 7% and 16% of total accounts receivable at March 31, 1996
and April 2, 1995, respectively. If the financial condition and operations of
this distributor or OEM deteriorate below critical levels, the Company's
operating results could be adversely affected.
Industry Risk.
Products and Markets. The Company operates in predominantly one industry segment
(Note 12) within the semiconductor industry. The semiconductor industry is
highly cyclical and has been subject to significant downturns at various times
that have been characterized by diminished product demand, production over
capacity and accelerated erosion of average selling prices. Therefore, the
average selling price the Company receives for industry standard products is
dependent upon industry-wide demand and capacity, and such prices have
historically been subject to rapid change.
Materials. The Company's manufacturing operations depend upon obtaining adequate
raw materials. The number of vendors of certain raw materials, such as silicon
wafers, ultra-pure metals and certain chemicals and gases, is very limited. The
Company's results of operations would be adversely affected if it were unable to
obtain adequate supplies of raw materials in a timely manner or if there were
significant increases in the costs of raw materials.
32
Employee Stock Plans. The Company accounts for its stock options plans and its
employee stock purchase plan in accordance with provisions of the Accounting
Principles Board's Opinion No. 25 (APB 25), "Accounting for Stock Issued to
Employees". In accordance with SFAS No. 123, "Accounting for Stock-Based
Compensation," the Company intends to continue to apply APB No. 25 for purposes
of determining net income and to adopt the pro forma disclosure requirements in
fiscal 1997.
Use of estimates. The preparation of financial statements in conformity with
generally accepted accounting principles requires management to make estimates
and assumptions that affect the amounts reported in the financial statements and
accompanying notes. Actual results could differ from those estimates, although
such differences are not expected to be material to the financial statements.
Stock dividend and reclassifications. On August 2, 1995, the Company announced a
two-for-one stock split of its common stock in the form of a 100% stock dividend
payable to stockholders of record as of August 25, 1995. On or about September
15, 1995 stockholders received certificates representing one additional share
for every share held. The Company's par value of $0.001 per share remained
unchanged. Historical share and per share amounts have been restated to reflect
retroactively the stock dividend.
Certain reclassifications have been made to prior year balances, none of which
affected results of operations, to present the financial statements on a
consistent basis.
33
NOTE 2--DERIVATIVE FINANCIAL INSTRUMENTS
The Company has foreign subsidiaries which operate and sell or manufacture the
Company's products in various global markets. As a result, the Company is
exposed to changes in foreign currency exchange rates. The Company primarily
utilizes forward exchange contracts to hedge against the short-term impact of
foreign currency fluctuations on certain assets or liabilities denominated in
foreign currencies. The total amount of these contracts is offset by the
underlying assets denominated in foreign currencies. The gains or losses on
these contracts are included in income as the exchange rates change. Management
believes that these forward contracts do not subject the Company to undue risk
due to foreign exchange movements because gains and losses on these contracts
are offset by losses and gains on the underlying asset and transactions being
hedged. These forward exchange contracts are considered identifiable hedges and
realized and unrealized gains and losses are deferred until settlement of the
underlying commitments. At March 31, 1996 deferred gains and losses are not
material.
Foreign exchange hedge positions which include buy and sell positions, generally
with maturities of less than three months are as follows:
March 31, 1996 April 2, 1995
---------------------------------------- -------------------------------------
Buy Sell Buy Sell
(in thousands of U.S. dollars)
Japanese Yen $ $ 14,569 $ 1,898 $ 10,357
British Pound Sterling 2,561 992
Malaysian Ringgits 5,271 2,214 2,003 3,022
Others 211
----- ------ ------ ------
$ 5,271 $ 19,344 $ 3,901 $ 14,582
===== ====== ====== ======
The Company is exposed to credit-related losses if counterparties to
financial instruments fail to perform their obligations. However, it does not
expect any counterparties, which presently have high credit ratings, to fail to
meet their obligations. The Company controls credit risk through credit
approvals, limits and monitoring procedures including the use of high credit
quality counterparties.
34
NOTE 3--OTHER ASSETS--INTANGIBLES
During fiscal 1993, IDT entered into various royalty-free patent cross-license
agreements. The patents licenses granted to IDT under these agreements have been
recorded at their cost of approximately $8,200,000 and are being amortized on a
straight-line basis over five years. The amortization relating to patents
licenses was $1,647,000 in each of fiscal years 1996, 1995 and 1994.
35
NOTE 4--LONG-TERM LEASE OBLIGATIONS
The Company leases certain equipment under long-term leases or finances
purchases of equipment under bank financing agreements. Leased assets and assets
pledged under financing agreements which are included under property, plant and
equipment are as follows:
(in thousands) March 31, 1996 April 2, 1995
-------------- -------------
Machinery and equipment $ 17,296 $ 39,316
Less accumulated depreciation and amortization (13,233) (27,396)
-------- --------
$ 4,063 $ 11,920
======== ========
The capital lease agreements and equipment financings are collateralized by the
related leased equipment and contain certain restrictive covenants.
Future minimum payments under capital leases and equipment financing agreements,
at varying interest rates (4.7%-10.5%) are as follows:
FISCAL YEAR (in thousands)
1997 $ 3,312
1998 1,629
1999 3
-----
Total minimum payments 4,944
Less interest (340)
-----
Present value of net minimum payments 4,604
Less current portion (3,047)
-----
$ 1,557
=====
36
NOTE 5--LONG-TERM DEBT
Long-term debt consists of the following:
(in thousands) March 31, 1996 April 2, 1995
-------------- -------------
Mortgage payable bearing interest at 9.625%
due in monthly installments of $142,000
including interest through April 1, 2005
The note is secured by property and
improvements in San Jose, California $ 10,238 $ 10,922
Less current portion (752) (684)
------- -------
$ 9,486 $ 10,238
======= =======
Principal payments required in the next five years and beyond are as follows (in
thousands): $752 (1997), $828 (1998), $911 (1999), $1,003 (2000) and $6,744
(2001 and beyond).
In fiscal 1996, the Company capitalized $2,983,000 of interest expense ($152,000
in fiscal year 1995) in connection with the construction of the Hillsboro,
Oregon plant.
During fiscal 1993, IDT recorded a long-term obligation in connection with the
dismissal of certain litigation and entered into a patent cross-license
agreement. The present values of the amount due at the end of the license term
were $7,073,000 and $7,581,000 at March 31, 1996 and April 2, 1995,
respectively. In both fiscal years, these amounts payable have been reduced by
an amount of royalty income pursuant to certain guaranteed revenues realized on
sales of IDT's products. The Company is accreting $1,620,000 in future interest
charges, reflecting an 8% discount rate, from the recorded amount at March 31,
1996 to the amount due at the end of the term using the effective interest
method.
In May 1995, the Company issued $201.3 million of 5.5% Convertible Subordinated
Notes (the "Notes"), due 2002. The Notes are subordinated to all existing and
future senior debt and are convertible into shares of the Company's common stock
at a conversion rate of $28.625 per share and are redeemable at the option of
the Company in whole or in part at any time on or after June 2, 1998 at 102.75%
initially and thereafter at prices declining to 100% at maturity plus accrued
interest. Each holder of these Notes has the right, subject to certain
conditions and restrictions, to require the Company to offer to repurchase all
outstanding Notes, in whole or in part, owned by such holder, at specified
repurchase prices plus accrued interest upon the occurrence of certain events
and in certain circumstances. The costs incurred in connection with the offering
($4,600,000) have been netted against the Notes balance in the consolidated
balance sheet and are being amortized over the 7-year term of the Notes using
the straight-line method which approximates the effective interest method.
Interest on the Notes is payable semi-annually on June 1 and December 1
commencing December 1, 1995. Based upon quoted market prices, the fair value of
the Notes was approximately $152,725,000 at March 31, 1996.
37
In January 1996, the Company retired $15 million of the Notes at a cost of
approximately $12 million resulting in an extraordinary gain. The gain, net of
tax and deferred issue costs, has been recorded as an extraordinary item in the
Company's consolidated financial statements for the twelve months ending March
31, 1996. The per share amount of the gain on early retirement of debt, net of
related income tax effect, was $0.02 in fiscal 1996.
38
NOTE 6--LINES OF CREDIT
The Company's Malaysian subsidiary has unsecured revolving lines of
credit that allow borrowings up to $2,600,000 with three local banks. These
lines have no expiration dates. At March 31, 1996 there were no outstanding
borrowings against these lines. The borrowing rates for these lines are incurred
at the local bank's cost of funds plus 0.75% to 1% (8.6%-8.7% on March 31,
1996).
In fiscal 1996, the Company's Japanese subsidiary had a secured
revolving line of credit that allowed borrowings of up to approximately
$2,800,000. The line of credit automatically extends until the Company requests
termination. As of March 31, 1996, no amounts were outstanding under this line
of credit. The borrowing rate for this line of credit is the local bank's
short-term prime rate existing at the borrowing date. At March 31, 1996 this
short-term borrowing rate was 1.63%.
The Company also has foreign exchange facilities with several banks
that allow the Company to enter into foreign exchange contracts of up to
$115,000,000, of which $94,761,000 was available at March 31, 1996.
39
NOTE 7--COMMITMENTS
Lease Commitments. The Company leases most of its administrative and
manufacturing facilities under operating lease agreements which expire at
various dates through 2005. One facility is leased from a shareholder and
director. The Company recorded rental expense for the facility leased from the
shareholder and director of $1,058,000, $1,527,000 and $1,396,000 in fiscal
1996, 1995 and 1994, respectively. During fiscal 1995, this lease was renewed
through June 2005. On March 8, 1996, the Company entered into an agreement to
purchase this facility for a purchase price of approximately $8,509,000 in a
transaction structured as a tax-free stock exchange. The following rent
commitments table has not been adjusted to reflect this transaction as the
details have not been finalized.
In fiscal 1995, the Company entered into a five-year $60 million (revised to $64
million in fiscal 1996) Tax Ownership Lease transaction to lease the wafer
fabrication facility in Hillsboro, Oregon. This lease requires monthly payments
which vary based on the London Interbank Offered Rate (LIBOR) plus 0.3% (5.77%
at March 31, 1996). This lease also provides the Company with the option of
either acquiring the building at its original cost or arranging for the building
to be acquired at the end of the respective lease term. The Company's
obligations under the lease are secured by a trust deed on the building and
collateralized by cash and/or investments (restricted securities) up to 105% of
the lessor's construction costs until the building was completed in fiscal 1996
and 85% thereafter. Restricted securities, included in other non-current assets,
collateralizing this lease were $67,782,000 at March 31, 1996 and $10,500,000 at
April 2, 1995. The Company is also contingently liable under a first-loss clause
for up to 85% of the construction costs of the building. In addition, the
Company must maintain compliance with certain financial covenants. Management
believes that this contingent liability will not have a material adverse effect
on the Company's financial position or results of operations.
The aggregate minimum rent commitments under all operating leases, including the
Hillsboro facility, which began in January 1996 at approximately $3,700,000 per
year, are as follows:
(FISCAL YEAR) (IN THOUSANDS)
1997 $ 8,040
1998 8,140
1999 7,939
2000 7,001
2001 3,356
2002 and thereafter 4,002
-----
$ 38,478
======
40
Rent expense for the years ended March 31, 1996, April 2, 1995 and April 3, 1994
totaled approximately $4,552,000, $3,326,000 and $3,488,000 respectively.
As of March 31, 1996, two secured standby letters of credit were outstanding
totaling $8,235,000. One letter of credit is held in connection with the
Company's workers compensation insurance and matures on January 28, 1997. The
other letter of credit is required for international purchases and expires on
June 10, 1996.
As of March 31, 1996, the Company had commitments of $52 million for equipment
purchases and $9.8 million for the construction of buildings.
NOTE 8--SALE OF COMMON STOCK
In December 1994, the Company completed a public offering of 7,620,000 shares of
its Common Stock and received net proceeds of $97,600,000.
41
NOTE 9--STOCKHOLDERS' EQUITY
Stock Option Plans. The Company has stock option plans under which key
employees, officers, directors and consultants may be granted options to
purchase shares of the Company's common stock at prices which are not less than
fair market value at the date of grant. Options granted are generally
exercisable in 25% increments each year beginning one year after the grant date.
During January 1996, employees and officers holding options to purchase
6,752,351 shares of the Company's common stock were offered the opportunity to
cancel options in exchange for grants of new options, with certain restrictions
and limitations, at the then current market price. Under the terms of the
program, 6,090,334 shares were exchanged and are reflected in the grant and
cancellation activity for fiscal 1996.
Activity under the plans is summarized as follows:
Options Outstanding
------------------------------------------------
Available Aggregate
for Issuance Number Price per Share Price
-------------------------------------------------------------------------------------
Balance, March 28, 1993 1,940,214 10,393,798 $ 1.625 - $ 6.0625 $ 21,245,000
Additional authorization 1,950,000
Granted (3,700,468) 3,700,468 $ 3.50 - $ 12.6875 26,599,000
Surrendered, canceled or expired 568,020 (574,846) $ 1.625 - $ 11.0625 (1,738,000)
Exercised (3,561,226) $ 1.625 - $ 8.8125 (6,695,000)
----------- ---------- ------------
Balance, April 3, 1994 757,766 9,958,194 $ 1.625 - $ 12.6875 39,411,000
Additional authorization 3,350,000
Granted (3,024,112) 3,024,112 $ 8.25 - $ 19.844 41,595,000
Surrendered, canceled or expired 574,024 (567,202) $ 1.625 - $ 19.844 (4,903,000)
Exercised (1,477,158) $ 1.625 - $ 14.0625 (3,529,000)
----------- ---------- ------------
Balance, April 2, 1995 1,657,678 10,937,946 $ 1.625 - $ 19.844 72,574,000
Additional authorization 4,000,000
Granted (10,907,337) 10,907,337 $ 9.875 - $ 32.75 156,026,000
Surrendered, canceled or expired 6,789,906 (6,789,906) $ 1.625 - $ 32.0625 (121,662,000)
Exercised (1,034,261) $ 1.625 - $ 18.9375 (2,955,000)
----------- ---------- ------------
Balance, March 31, 1996 1,540,247 14,021,116 $ 1.625 - $ 32.0625 103,983,000
=========== ========== ============
Exercisable at March 31, 1996 4,120,357 $ 1.625 - $ 19.844 $ 12,485,000
========== ============
Stock Purchase Plan. The Company has a stock purchase plan under which employees
and officers may purchase shares of the Company's common stock. The purchase
price at which shares may be purchased under this plan is 85% of the lower of
the fair market value on the first or last day of each quarterly plan period. As
of March 31, 1996 and April 2, 1995, 3,435,714 and 3,189,810 shares,
respectively, had been purchased by employees, net of repurchases by the
Company, under the terms of the plan agreements. At March 31, 1996, 614,286
shares were reserved and available for issuance under this plan.
42
Stockholder Rights Plan. In February 1992, the Board approved certain amendments
to the Company's Stockholder Rights Plan. Under the plan, the Company declared a
dividend of one preferred share purchase right (a "Right") for each outstanding
share of common stock. As a result of a two-for-one stock dividend in September
1995, the number of Rights associated with each share of Common Stock was
adjusted proportionately to one-half of a Right per share of Common Stock. Each
Right entitles the holder, under certain circumstances, to purchase common stock
of the Company with a value of twice the exercise price of the Right. In
addition, the Board of Directors may, under certain circumstances, cause each
Right to be exchanged for one share of common stock or substitute consideration.
The Rights are redeemable by the Company and expire in 1998.
43
NOTE 10--EMPLOYEE BENEFITS PLANS
The Profit Sharing Plan is available to all employees who have at least six
months of service with the Company. Under this plan, all eligible IDT employees
will receive profit sharing contributions of 7% of pre-tax earnings in cash, and
an additional 1% of pre-tax earnings, is divided equally among all domestic
employees and contributed to the Company's 401(k) plan. Administrative expenses
are netted against the Profit Sharing Plan contribution. The cash contributions
for the years ended March 31, 1996, April 2, 1995 and April 3, 1994 for this
plan were $14,056,000, $8,360,000 and $5,128,000 respectively.
The Company pays an annual cash bonus to certain executive officers and other
key employees based on the pre-tax earnings of the Company and the employee's
individual performance. Prior to fiscal 1996 the aggregate amount of all bonuses
paid for any single fiscal year was up to 6% of pre-tax profits for the year.
During fiscal 1996, the amount accrued under the bonus plan was 6% of operating
income less a factor for the percent change in the Company's income tax
provision rate over the prior year. The performance bonus recorded for the years
ended March 31, 1996, April 2, 1995 and April 3, 1994 for this plan were
$9,136,000, $6,264,000 and $ 3,012,000 respectively.
44
NOTE 11 INCOME TAXES
The components of income before provision for income taxes are as follows:
March 31, April 2, April 3,
(in thousands) 1996 1995 1994
----------- ----------- ----------
United States $ 161,209 $ 96,524 $ 44,808
Foreign 12,687 7,879 5,398
----------- ----------- ----------
$ 173,896 $ 104,403 $ 50,206
=========== =========== ==========
The provisions for income taxes consist of the following:
March 31, April 2, April 3,
(in thousands) 1996 1995 1994
----------- ----------- ----------
Current income taxes:
United States $ 63,829 $ 21,164 $ 14,699
State 1,517 3,902 4,039
Foreign 2,293 668 798
----------- ----------- ----------
67,639 25,734 19,536
----------- ----------- ----------
Deferred (prepaid) income taxes:
United States (11,340) (182) (5,379)
State (652) 549 (4,116)
----------- ----------- ----------
(11,992) 367 (9,495)
----------- ----------- ----------
Provision for income taxes $ 55,647 $ 26,101 $ 10,041
=========== =========== ==========
45
Deferred income taxes reflect the net tax effects of temporary differences
between the carrying amounts of assets and liabilities for financial reporting
purposes and the amounts used for income tax purposes. The significant
components of deferred assets and liabilities are as follows:
March 31, April 2,
(in thousands) 1996 1995
----------- -----------
Deferred tax assets:
Deferred income on shipments to distributors $ 12,289 $ 8,768
Non-deductible accruals and reserves 16,208 8,980
Capitalized inventory and other expenses 9,694 5,817
Other 521 1,358
----------- -----------
Total deferred tax assets 38,712 24,923
----------- -----------
Deferred tax liabilities:
Depreciation (9,367) (7,570)
----------- -----------
Total deferred tax liabilities (9,367) (7,570)
----------- -----------
Net deferred tax assets $ 29,345 $ 17,353
=========== ===========
46
The provisions for income taxes differ from the amount computed by applying the
U.S. statutory income tax rate of 35% to income before the provision for income
taxes as follows:
March 31, April 2, April 3,
(in thousands) 1996 1995 1994
----------- ----------- ----------
Provision at U.S. statutory rate $ 60,864 $ 36,541 $ 17,572
Earnings of foreign subsidiaries considered
permanently reinvested, less foreign taxes (2,327) (2,444) (951)
General business credits (1,994) (6,504) (2,710)
Tax rate differential 0 0 (1,167)
State tax, net of federal benefit 865 3,245 3,558
Valuation allowance 0 (2,337) (6,108)
Other (1,761) (2,400) (153)
----------- ----------- ----------
Provision for income taxes $ 55,647 $ 26,101 $ 10,041
=========== =========== ==========
The Company's Malaysian subsidiary operated under a tax holiday which extended
through July, 1993. Management believes it is likely that carryovers of
depreciation from the tax holiday period along with expected additional
depreciation grants will defer the time when the Malaysian subsidiary will first
begin to pay local income taxes on operating income until after its year ended
March 31, 1996.
The Company's intention is to permanently reinvest its earnings in all of its
foreign subsidiaries, except for its German subsidiary, Integrated Device
Technology GMBH. Accordingly, U.S. taxes have not been provided on approximately
$38,673,085 of unremitted earnings, of which approximately $32,495,430 were
earned by the Company's Malaysian subsidiary. Upon distribution of those
earnings in the form of dividends or otherwise, the Company will be subject to
both U.S. income taxes and various foreign country withholding taxes.
47
NOTE 12--INDUSTRY SEGMENT, FOREIGN OPERATIONS AND SIGNIFICANT CUSTOMERS
IDT operates predominantly in one industry segment. The Company designs,
develops, manufactures and markets a broad range of high-performance
semiconductor products for the communications, desktop computer, office
automation and workstation/server markets using advanced CMOS (Complimentary
Metal Oxide Silicon) process technology. The Company offers products in four
product families; SRAM components and modules, specialty memory products, logic
circuits and RISC microprocessors and subsystems. During fiscal 1994, two of the
Company's national distributors became one entity. Sales through a national
distributor accounted for 11%, 13% and 15% of net revenues for fiscal 1996, 1995
and 1994 respectively. Additionally, one OEM customer accounted for 12% of net
revenues in fiscal 1996.
Major operations outside the United States include manufacturing facilities in
Malaysia and sales subsidiaries in Japan, the Pacific Rim, and throughout
Europe. At March 31, 1996, and April 2, 1995 total liabilities for operations
outside of the United States were $34,475,000 and $42,065,000, respectively.
The following is a summary extract of IDT's foreign operations by geographic
areas for fiscal 1996, 1995 and 1994:
TRANSFERS
SALES TO BETWEEN OPERATING
UNAFFILIATED GEOGRAPHIC INCOME IDENTIFIABLE
CUSTOMERS AREAS NET REVENUES (LOSS) ASSETS
(in thousands)
Fiscal year ended March 31, 1996
United States $ 404,994 $ 150,769 $555,763 $149,206 $574,287
Japan 72,530 72,530 3,405 21,482
Europe 144,154 144,154 39,274 28,478
Asia-Pacific 57,819 46,870 104,689 8,466 72,703
Eliminations (197,639) (197,639) 89 (42,633)
Corporate (36,707) 285,117
--------------------------------------------------------------------------------
Consolidated $ 679,497 $ -- $679,497 $163,733 $939,434
================================================================================
Fiscal year ended April 2, 1995
United States $ 256,014 $ 60,266 $316,280 $111,394 $292,501
Japan 36,974 36,974 582 11,973
Europe 85,180 7,566 92,746 9,524 30,788
Asia-Pacific 44,022 30,929 74,951 5,812 36,855
Eliminations (98,761) (98,761) (217) (48,797)
Corporate (27,580) 238,655
--------------------------------------------------------------------------------
Consolidated $ 422,190 $ -- $422,190 $ 99,515 $561,975
================================================================================
Fiscal year ended April 3, 1994
United States $ 223,600 $ 42,500 $266,100 $ 70,788 $197,385
Japan 29,959 29,959 (257) 8,033
Europe 60,064 3,274 63,338 677 8,182
Asia-Pacific 16,839 24,869 41,708 5,146 27,202
Eliminations (70,643) (70,643) (408) (24,470)
Corporate (23,677) 133,239
--------------------------------------------------------------------------------
Consolidated $ 330,462 $ -- $330,462 $ 52,269 $349,571
--------------------------------------------------------------------------------
Transfers between geographic areas are accounted for at amounts which are
generally above cost and consistent with the rules and regulations of governing
tax authorities. Such transfers are eliminated in the consolidated financial
statements. Operating income by geographic areas reflect foreign earnings
48
reported by the foreign entities and does not include an allocation of general
corporate expenses. Identifiable assets are those assets that can be directly
associated with a particular foreign entity and thus do not include assets used
for general corporate purposes: cash and cash equivalents, short-term
investments and deferred tax assets.
NOTE 13--CROSS-LICENSE AGREEMENT
During fiscal 1993, the Company entered into a 5 year patent cross-license
agreement which obligated the payment of an amount of royalties dependent upon
the level of the Company's profitability. The maximum royalty under this
agreement was accrued in fiscal 1994 and paid during fiscal 1995.
49
NOTE 14 -- RELATED PARTIES TRANSACTIONS
The Company leases one facility from a shareholder and director of the Company
(Note 7). The Company paid rent of $1,266,000 during fiscal 1996, under a lease
agreement that was renewed during fiscal 1996 through June 2005, with options to
renew for successive five-year periods through 2015. On March 8, 1996, the
Company entered into an agreement to acquire the Salinas facility for
$8,509,000, with payment in the form of 782,445 unregistered shares of the
Company's stock at $10.875 per share.
The Company holds an approximately 37.4% equity interest in Quantum Effect
Design, Inc., (QED). A shareholder and director also holds an approximate 3.7%
equity interest in QED. During fiscal 1996, the Company paid QED a total of
$900,000 for product development and nonrecurring engineering expenses. During
fiscal 1996, the Company recorded royalty expense of $2,029,000 to QED.
The Company holds an approximately 14% equity interest in Monolithic System
Technology, Inc. (MoSys). An executive officer and director and a shareholder
and director of the Company are members of the board of directors of MoSys. The
shareholder and director also holds an equity interest of approximately 15% of
MoSys. During the year ended March 31, 1996, the Company recorded $1,594,000 of
revenues associated with a foundry relationship whereby IDT manufactured DRAM
wafers for MoSys.
50
SUPPLEMENTARY FINANCIAL INFORMATION (UNAUDITED)
QUARTERLY RESULTS OF OPERATIONS
(IN THOUSANDS, EXCEPT PER SHARE DATA)
Year ended March 31, 1996
First Second Third Fourth
Quarter Quarter Quarter Quarter
-------- -------- -------- --------
Revenues $152,195 $178,504 $188,545 $160,253
Gross profit 87,873 102,785 108,145 86,999
Income before
extraordinary item 28,791 34,336 35,535 19,587
Net income 28,791 34,336 35,535 21,508
Primary earnings per share:
Income before
extraordinary item 0.35 0.42 0.44 0.24
Net income 0.35 0.42 0.44 0.27
Fully diluted earnings per share:
Income before
extraordinary item 0.35 0.40 0.42 0.25
Net income 0.35 0.40 0.42 0.27
Year ended April 2, 1995
First Second Third Fourth
Quarter Quarter Quarter Quarter
-------- -------- -------- --------
Revenues $95,043 $95,585 $105,765 $125,797
Gross profit 54,632 55,574 60,528 71,804
Income before
extraordinary item 16,878 17,006 19,799 24,619
Net income 16,878 17,006 19,799 24,619
Primary earnings per share:
Income before
extraordinary item 0.23 0.24 0.27 0.30
Net income 0.23 0.24 0.27 0.30
Fully diluted earnings per share:
Income before
extraordinary item 0.23 0.24 0.27 0.30
Net income 0.23 0.24 0.27 0.30
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON
ACCOUNTING AND FINANCIAL DISCLOSURE
Not applicable.
51
PART III
ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
There is incorporated herein by reference the information required by this Item
included in the Company's Proxy Statement for the 1996 Annual Meeting of
Stockholders which will be filed with the Securities and Exchange Commission no
later than 120 days after the close of the fiscal year ended March 31,1996, and
the information from the section entitled "Executive Officers of the Registrant"
in Part I, Item 4A of this Report.
ITEM 11. EXECUTIVE COMPENSATION
There is incorporated herein by reference the information required by this Item
included in the Company's Proxy Statement for the 1996 Annual Meeting of
Stockholders.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND
MANAGEMENT
There is incorporated herein by reference the information required by this Item
included in the Company's Proxy statement for the 1996 Annual Meeting of
Stockholders.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
There is incorporated herein by reference the information required by this Item
included in the Company's Proxy Statement for the 1996 Annual Meeting of
Stockholders.
PART IV
ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K
(a) 1. Financial Statements
The following consolidated financial statements are included
in Item 8:
- Consolidated Balance Sheets at March 31, 1996 and
April 2, 1995
- Consolidated Statements of Operations for each of the
three fiscal years in the period ended March 31, 1996
- Consolidated Statements of Cash Flows for each of the
three fiscal years in the period ended March 31, 1996
- Consolidated Statements of Stockholders' Equity for each
of the three fiscal years in the period ended March 31,
1996
- Notes to Consolidated Financial Statements
(a) 2. Financial Statement Schedules
Schedule II - Valuation and Qualifying Accounts
52
All other schedules are omitted since the required information
is not present in amounts sufficient to require submission of the schedules, or
because the required information is included in the financial statements or
notes thereto.
(a) 3. Listing of Exhibits
Exhibit No. Description
Page
3.1* Restated Certificate of Incorporation (previously filed as Exhibit 3A to
Registration Statement on Form 8-B dated September 23, 1987).
3.2* Certificate of Amendment of Restated Certificate of Incorporation
(previously filed as Exhibit 3(a) to the Registration Statement on Form 8
dated March 28, 1989).
3.3* Certificate of Amendment of Restated Certificate of Incorporation
(previously filed as Exhibit 4.3 to the Registration Statement on Form
S-8 (File Number 33-63133) filed on October 2, 1995).
3.4* Certificate of Designation, Preferences and Rights of Series A Junior
Participating Preferred Stock (previously filed as Exhibit 3(a) to the
Registration Statement on Form 8 dated March 28, 1989).
3.5* Bylaws dated January 25, 1993 (previously filed as Exhibit 3.4 to Annual
Report on Form 10-K for the Fiscal Year Ended March 28, 1993).
4.1* Amended and Restated Rights Agreement dated as of February 27, 1992,
between the Company and The First National Bank of Boston (previously
filed as Exhibit 4.1 to Current Report on Form 8-K dated February 27,
1992).
4.2* Amendment dated September 29, 1995 to the Rights Agreement (previously
filed as Exhibit 4.2 to Amendment No. 2 to the Registration Statement on
Form 8-A filed October 19, 1995).
4.3* Form of Indenture between the Company and The First National Bank of
Boston, as Trustee, including Form of Notes (previously filed as Exhibit
4.6 to the S-3 Registration Statement (File number 33-59443).
10.1* Lease for 1566 Moffet Street, Salinas, California, dated June 28, 1985
between the Company and Carl E. Berg and Clyde J. Berg, dba Berg & Berg
Developers (previously filed as Exhibit 10.7 to Form S-1 Registration
Statement (File No. 33- 3189)).
10.2* Assignment of Lease dated October 30, 1985 between the Company and
Synertek Inc. relating to 2975 Stender Way, Santa Clara, California
(previously filed as Exhibit 10.4 to Annual Report on Form 10-K for the
Fiscal Year Ended April 1, 1990).
53
10.3* Assignment of Lease dated October 30, 1985 between the Company and
Synertek Inc. relating to 3001 Stender Way, Santa Clara, California
(previously filed as Exhibit 10.5 to Annual Report on Form 10-K for
Fiscal Year Ended April 1, 1990).
10.4* Lease dated October 23, 1989 between Integrated Device Technology
International Inc. and RREEF USA FUND - III relating to 2972 Stender Way,
Santa Clara, California (previously filed as Exhibit 10.6 to Annual
Report on Form 10-K for the Fiscal Year Ended April 1, 1990).
10.5* First Deed of Trust and Assignment of Rents, Security Agreement and
Fixture Filing dated March 28, 1990 between the Company and Santa Clara
Land Title Company for the benefit of The Variable Annuity Life Insurance
Company relating to 2670 Seeley Avenue, San Jose, California (previously
filed as Exhibit 10.7 to Annual Report on Form 10-K for the Fiscal Year
Ended April 1, 1990).
10.6* Amended and Restated 1984 Employee Stock Purchase Plan(previously filed
as Exhibit 10.16 to the Quarterly Report on Form 10-Q for the Fiscal
Quarter Ended October 2, 1994).**
10.7* 1994 Stock Option Plan, as amended through May 3, 1995 (previously filed
as Exhibit 4.8 to the Registration Statement on Form S-8 (File Number
33-63133) filed on October 2, 1995).**
10.8* 1994 Directors Stock Option Plan and related documents(previously filed
as Exhibit 10.18 to the Quarterly Report on Form 10-Q for the Fiscal
Quarter Ended October 2, 1994).**
10.9* Form of Indemnification Agreement between the Company and its directors
and officers (previously filed as Exhibit 10.68 to Annual Report on Form
10-K for the Fiscal Year Ended April 2, 1989).**
10.10* Manufacturing, Marketing and Purchase Agreement between the Company and
MIPS Computer Systems, Inc. dated January 16, 1988 (previously filed as
Exhibit to Annual Report on Form 10-K for the Fiscal Year Ended March 29,
1992) (Confidential Treatment Granted).
10.11* Preferred Stock Purchase Agreement dated January 14, 1992 among the
Company, Berg & Berg Enterprises, Inc. and Quantum Effect Design, Inc.
(previously filed as Exhibit 10.13 to Annual Report on Form 10-K for the
Fiscal Year Ended March 29, 1992).
10.12* Patent License Agreement between the Company and American Telephone and
Telegraph Company ("AT&T") dated May 1, 1992 (previously filed as Exhibit
19.1 to Quarterly Report on Form 10-Q for the Quarter Ended June 28,
1992) (Confidential Treatment Granted).
54
10.13* Patent License Agreement dated September 22, 1992 between the Company and
Motorola, Inc. (previously filed as Exhibit 19.1 to Quarterly Report on
Form 10Q for the Quarter Ended September 27, 1992) (Confidential
Treatment Granted).
10.14* Agreement between the Company and Texas Instruments Incorporated
effective December 10, 1992, including all related exhibits, among
others, the Patent Cross-License Agreement and the OEM Purchase Agreement
(previously filed as Exhibit 19.1 to Quarterly Report on Form 10-Q for
the Quarter Ended December 27, 1992) (Confidential Treatment Granted).
10.15* Series A Preferred Stock Purchase Agreement dated July 16,1992 among
Monolithic System Technology, Inc. and certain purchasers (previously
filed as Exhibit 10.12 to the Quarterly Report on Form 10-Q for the
Fiscal Quarter Ended October 2, 1994).
10.16* Series B Preferred Stock Purchase Agreement dated March 1994 among
Monolithic System Technology, Inc. and certain purchasers (previously
filed as Exhibit 10.13 to the Quarter Report on Form 10-Q for the Fiscal
Quarter Ended October 2, 1994).
10.17* Series C Preferred Stock Purchase Agreement dated June 13,1994 among
Monolithic System Technology, Inc. and certain purchasers (previously
filed as Exhibit 10.14 to the Quarterly Report on Form 10-Q for the
Fiscal Quarter Ended October 2, 1994).
10.18* Domestic Distributor Agreement between the Company and Wyle Laboratories,
Inc. Electronic Marketing Group dated as of April 15, 1994 (previously
filed as Exhibit 10.15 to the Quarterly Report on Form 10-Q for the
Fiscal Quarter Ended October 2, 1994).
10.19* Lease Extension and Modification Agreement between the Company and
Baccarat Silicon, Inc. ("Baccarat") dated as of September 1, 1994,
relating to 1566 Moffet Street, Salinas, California (previously filed as
Exhibit 10.16 to the Quarterly Report on Form 10-Q for the Fiscal Quarter
Ended October 2, 1994).
10.20* Promissory Note dated April 28, 1995 between L. Robert Phillips and the
Company and related document (previously filed as Exhibit 10.20 to the
Annual report on Form 10-K for the Fiscal Year Ended April 2, 1995).**
10.21* Sublease of the Land and Lease of the Improvement by and between Sumitomo
Bank Leasing and Finance, Inc. and the Company dated January 27, 1995 and
related agreements thereto (previously filed as Exhibit 10.21 to the
Annual Report on Form 10-K for the Fiscal Year Ended April 2, 1995).
10.22* 1995 Executive Performance Plan (previously filed as Exhibit 10.22 to the
Quarterly Report on Form 10-Q for the Fiscal Quarter Ended October 1,
1995).**
55
10.23 Letter amending Patent License Agreement between the Company and AT&T
dated December 4, 1995 (Confidential Treatment Requested).
10.24 Letter agreement dated March 8, 1996 between the Company and Baccarat
regarding the acquisition of Baccarat by the Company.
10.25 Lease dated July 1995 between Integrated Device Technology, Inc. and
American National Insurance Company relating to 3250 Olcott Street, Santa
Clara, California.
11.0 Statement re: computation of earnings per share
21.1 Subsidiaries of the Company.
23.1 Consent of Price Waterhouse LLP.
27.1 Financial Data Schedule (EDGAR version only)
* These exhibits were previously filed with the Commission as indicated and
are incorporated herein by reference.
** These exhibits are management contracts or compensatory plans or
arrangements required to be filed pursuant to Item 14 (c) of Form 10-K.
(b) Reports on Form 8-K
Not applicable.
56
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, the registrant has duly caused this report to be signed on
its behalf by the undersigned, thereunto duly authorized.
INTEGRATED DEVICE TECHNOLOGY, INC.
Registrant
May 15, 1996 By: /s/ Leonard C. Perham
Chief Executive Officer
Pursuant to the requirements of the Securities Exchange Act of 1934,
this report has been signed below by the following persons on behalf of the
registrant and in the capacities and on the date indicated.
Signature Title Date
/s/ D. John Carey Chairman of the Board May 15, 1996
(D. John Carey)
/s/ Leonard C. Perham Chief Executive Officer May 15, 1996
(Leonard C. Perham) and Director (Principal Executive Officer)
/s/ William D. Snyder Vice President, Chief May 15, 1996
(William D. Snyder) Financial Officer
(Principal Financial and Accounting Officer)
/s/ Carl E. Berg Director May 15, 1996
(Carl E. Berg)
/s/ John C. Bolger Director May 15, 1996
(John C. Bolger)
/s/ Federico Faggin Director May 15, 1996
(Federico Faggin)
57
SCHEDULE II
INTEGRATED DEVICE TECHNOLOGY, INC.
VALUATION AND QUALIFYING ACCOUNTS
Additions
Balance at Charged to
Beginning of Cost and Recoveries and Balance at
Period Expenses Write-offs End of Period
(In thousands)
Inventory Lower of Cost or Market Reserve
Year ended April 3, 1994 $ 2,190 $1,509 $ (2,905) $ 794
Year ended April 2, 1995 $ 794 $ 603 $ (760) $ 637
Year ended March 31, 1996 $ 637 $2,866 $ (191) $3,312
EXHIBIT INDEX
Exhibit No. Name
---------- ----
10.23 Letter amending Patent License Agreement between the Company and AT&T
dated December 4, 1995 (Confidential Treatment Requested).
10.24 Letter agreement dated March 8, 1996 between the Company and Baccarat
regarding the acquisition of Baccarat by the Company.
10.25 Lease dated July 1995 between Integrated Device Technology, Inc. and
American National Insurance Company relating to 3250 Olcott Street, Santa
Clara, California.
11.0 Statement re: computation of earnings per share
21.1 Subsidiaries of the Company.
23.1 Consent of Price Waterhouse LLP.
27.1 Financial Data Schedule (EDGAR version only)