1
Exhibit 10.8
The omitted portions indicated by brackets have been separately filed with the
Securities and Exchange Commission pursuant to a request for confidential
treatment under Rule 406, promulgated under the Securities Act of 1933, as
amended.
DISPERSION SERVICES AGREEMENT
This DISPERSION SERVICES AGREEMENT (the "Agreement"), executed this 20th
day of January, 2000, is between Cabot Corporation ("Cabot"), a Delaware
corporation, and Cabot Microelectronics Corporation ("CMC"), a Delaware
corporation. Notwithstanding the execution date hereof, this Agreement shall
become effective upon the date of the initial public offering by CMC of shares
of CMC common stock.
WHEREAS, Cabot and certain of its subsidiaries and CMC will be parties to
a Master Separation Agreement, (the "Master Separation Agreement"), which will
provide for the separation from Cabot of the business, assets and liabilities of
Microelectronics Materials Division of Cabot (the "MMD Business") and the
transfer of the MMD Business to CMC;
WHEREAS, in the past, the Microelectronics Materials Division of Cabot
has performed various dispersion services for Cabot;
WHEREAS, Cabot desires to have CMC provide to Cabot certain dispersion
services after the separation of the MMD Business; and
WHEREAS, CMC desires to provide such dispersion services to Cabot as
provided herein;
NOW, THEREFORE, in consideration of the foregoing premises and other good
and valuable consideration, the receipt and sufficiency of which is hereby
acknowledged, the parties hereby agree as follows:
SECTION 1. TERM
This Agreement shall commence on the date of the initial public offering
by CMC of shares of CMC common stock, and shall continue until June 30, 2005
(the "Initial Term"). Unless either party shall give a notice of nonrenewal
prior to December 31, 2003, this Agreement shall continue after the Initial Term
until terminated by either party by a written notice of termination, which shall
terminate this Agreement effective on the first June 30 or December 31 more than
18 months after the date such notice is delivered. The Initial Term, together
with any continuations, are referred to herein as the "Term". Each year of the
Term beginning on the effective date or an anniversary thereof is referred to
herein as a "Term Year", including the stub period, if any, between the last
anniversary of the effective date and the end of the Term.
2
SECTION 2. SERVICES
2.1 Purchase and Sale.
(a) Subject to the terms and conditions of this Agreement, during the
Term, CMC shall provide to Cabot, and Cabot shall purchase from CMC, the
Services (as defined below) in such quantities as specified by Cabot, subject to
Sections 2.3 through 2.6 below. "Services" means:
(i) the manufacturing and packaging of the type of dispersions set forth
on Schedule A hereto (the "Products") in accordance with the
specifications, formulae and processes provided by Cabot to CMC and
initially as set forth in the materials specified on Schedule A
hereto;
(ii) the packaging of the Products in accordance with specifications set
forth on Schedule A, which may be amended from time to time, by
mutual agreement; and
(iii) testing and other ancillary services as related thereto as may be
mutually agreed between Cabot and CMC from time to time.
(b) Any amendment to Schedule A shall require the consent of both CMC and
Cabot. Any increase in costs incurred by CMC in manufacturing and/or packaging
Products to comply with changes requested by Cabot to the specifications as set
forth on Schedule A shall be paid by Cabot.
(c) With respect to Products to be sold to customers of Cabot and/or its
subsidiaries which are located in the United States, Canada or Mexico
(collectively "North America"), Services shall be performed either by (i) CMC at
its facility in Aurora, Illinois (the "Aurora Plant"), or (ii) Davies Imperial
Coatings ("Davies"), pursuant to an agreement between CMC and Davies (the
"Davies Agreement"); provided that CMC shall continue to remain primarily liable
to Cabot for any Services provided by Davies. Cabot and CMC shall confer in good
faith in order to determine whether Services will be provided by the Aurora
Plant or Davies.
(d) With respect to Products to be sold to customers of Cabot and/or its
subsidiaries located in Europe, Services shall be performed at the dispersions
facility of CMC in Barry, Wales (the "Barry Plant").
(e) With respect to Products to be sold to customers of Cabot and/or its
subsidiaries located in regions other than North America or Europe, CMC shall
determine
-2-
3
the appropriate facility to perform such Services after review of its regional
capacity and capabilities and after consultation with Cabot.
(f) Notwithstanding anything to the contrary in subsections (c) and (d)
above, and subject to 2.3(a)(i), Cabot may specify Products to be manufactured
at the Aurora Plant, regardless of the ultimate geographic market for such
Products, provided that such Products would not be incompatible with the
dispersions manufacturing capabilities at the Aurora Plant or that such Products
would not create contamination issues with respect to the products CMC
manufactures at its Aurora Plant.
2.2 Forecasts.
Cabot shall provide CMC with forecasts (the "Forecasts") of the quantities
of Products that Cabot expects to purchase from CMC (the "Forecasted
Quantities"). The Forecasts shall identify the Forecasted Quantities of the
Products and the geographic locations for manufacture (i.e., the Aurora Plant,
Davies or the Barry Plant). Cabot shall provide the following Forecasts to CMC:
(a) not more than sixty (60) but not less than thirty (30) days prior to
each January 1, April 1, July 1 and October 1 during the Term, a Forecast
indicating the Forecasted Quantity for each month of the calendar quarter
commencing on such January 1, April 1, July 1 and October 1 (the "Quarterly
Forecast");
(b) not more than sixty (60) but not less than thirty (30) days prior to
on each July 1 and January 1 during the Term, a semi-annual Forecast indicating
the Forecasted Quantity for the six (6) month period commencing on such July 1
and January 1 (the "Six Month Forecast");
(c) not more than sixty (60) but not less than thirty (30) days prior to
on each July 1, a one (1) year Forecast indicating the Forecasted Quantity for
the calendar year commencing on the following July 1 (the "Annual Forecast");
and
(d) on or around each July 1, an eighteen (18) month Forecast indicating
the Forecasted Quantity for the eighteen month period commencing on the July 1
(the "18 Month Forecast"); provided, however, that Cabot shall provide CMC with
a revised eighteen (18) Month Forecast for the remainder of the eighteen (18)
month period covered by the last 18 Month Forecast as soon reasonably
practicable after Cabot becomes aware of any material changes to such 18 Month
Forecast.
For the purposes of this Agreement, Forecasts delivered by Cabot to CMC
after the execution hereof shall, upon the effectiveness of this Agreement, be
deemed to have been delivered hereunder.
-3-
4
2.3 CMC's Maximum Supply Obligations.
(a) The obligation of CMC to provide Products to Cabot shall be subject to
each of the following maximum monthly volume limitations:
(i) the maximum monthly volume of Products from CMC's Aurora, Illinois
facility (the "Aurora Plant") shall be [ ] gallons per month;
(ii) the maximum monthly volume of Products from Davies' Hammond, Indiana
facility (the "Hammond Plant") shall be [ ] gallons per month; and
(iii) the maximum monthly volume of Products from the Barry Plant shall be
[ ] gallons per month.
(b) In addition to the volume limitations set forth in 2.3(a) above, in
the event that Cabot orders volumes of Products from CMC in excess of Forecasted
Quantities, CMC shall not be obligated to supply to Cabot such Products in
excess of the following volumes:
(i) for any calendar quarter and any plant, [ ]% of the volumes for such
plant set forth in Cabot's Quarterly Forecasts;
(ii) for any calendar half year (beginning on or after July 1, 2000) and
any plant, [ ]% of the volumes for such plant set forth in Cabot's
Sixth Month Forecast; and
(iii) for any year beginning July 1 and any plant, [ ]% of the volumes for
such plant set forth in Cabot's Annual Forecast.
(c) The maximum supply volumes set forth in Sections 2.3 (a) and (b) are
referred to herein as the "Maximum Volumes". If Cabot shall order volumes of
Products in excess of the Maximum Volumes described above, CMC shall use
commercially reasonable efforts to supply such volumes ("Excess Volumes").
(d) Notwithstanding anything to the contrary in subsections (a) or (b)
above, if CMC shall increase its production capacity at its current dispersions
plants or at newly acquired or constructed dispersions plants, Cabot and CMC
shall negotiate in good faith regarding additional dispersions capacity that may
be available to Cabot and the price for dispersions services related to such
additional capacity.
2.4 Minimum Order Volumes.
-4-
5
Cabot agrees to order Products from CMC subject to the minimum batch
size requirements set forth on Schedule A hereto.
2.5 Exclusivity.
(a) Except in connection with its [ ] businesses, and subject to other
existing obligations, during the Term Cabot will not contract with any third
party (other than Cabot affiliates, CMC, CMIC or Davies) for the provision of
contract or toll manufacturing services for the production of fumed metal oxide
dispersions.
(b) Notwithstanding subsection (a) above or subsection (c) below:
(i) Cabot shall have right the during the Term to produce fumed metal
oxide dispersions for sale, its own use or the sale or use of its
subsidiaries;
(ii) if CMC or Davies is unable or unwilling to supply certain products
or volumes in accordance with the terms hereof, or above the Maximum
Volumes set forth in Section 2.3 hereof, Cabot shall have the right
to have such products or additional volumes of dispersions
manufactured for it by other parties;
(iii) In the event Cabot requests a change to the specifications, formulae
or processes set forth on Schedule A, which change is necessary in
order to achieve a material performance difference in Cabot's end
product, and CMC is not able or is unwilling to modify such Product,
Cabot shall have the right to have such changed products
manufactured for it by any other party; and
(iv) Cabot shall have the right to contract for and purchase from third
parties fumed metal oxide dispersions that are produced with fumed
metal oxides that are not supplied by Cabot.
(c) If Cabot terminates this Agreement, Cabot shall, for a period of [ ]
following the date of such termination purchase fumed metal oxide dispersions
products and services only from CMC, Davies or third parties who are not engaged
in the production and/or marketing of CMP (chemical mechanical polishing)
consumables.
(d) During the Term of this Agreement, CMC shall not knowingly, without
Cabot's prior written consent, directly or indirectly, (i) perform dispersions
services for any person or entity other than Cabot for use in the production of
any goods or products that compete with any Cabot products, or (ii) sell fumed
metal oxide dispersions products into applications, other than CMP applications,
which compete with any Cabot product.
-5-
6
2.6 Supply of Raw Materials
Cabot shall be responsible for the supply to CMC of the fumed metal oxide
particles necessary for the manufacture of the Products ordered by Cabot. Any
such volumes of fumed metal oxides shall not be deemed supplied pursuant to the
Fumed Metal Oxide Supply Agreement, of even date herewith. CMC shall be
responsible for the supply of all other materials necessary for the manufacture
of the Products, including packaging materials.
SECTION 3. PRICING
3.1 Prices. CMC shall perform the Services and sell the Products in
accordance with the following prices (the "Prices"):
(a) with respect to Products manufactured and the services performed by
CMC, the price shall equal the "Dispersion Manufacturing Cost" incurred by CMC
plus 25% of such Dispersion Manufacturing Cost. As used herein, the "Dispersion
Manufacturing Cost" of fumed metal oxide dispersions shall mean, all costs that
may be included in Inventory (applying GAAP), excluding the cost of fumed metal
oxides provided by Cabot, plus freight and handling costs associated with the
fumed metal oxides. CMC's budgeted standard cost of production of fumed metal
oxides may be used for calculating such Dispersion Manufacturing Cost, provided
that both parties mutually agree that it fairly approximates the above stated
Dispersion Manufacturing Cost, and that both parties mutually agree upon a
method to make adjustments due to variances between the budgeted standard cost
and the actual Dispersion Manufacturing Cost.
(b) with respect to Products manufactured and the services performed by
Davies, the price shall equal the Dispersion Manufacturing Cost incurred by CMC
(excluding the costs of the fumed metal oxide particle supplied by Cabot) plus
10% of such costs as an administrative charge.
Cabot shall have the right to have a recognized accounting firm audit the
books and records of CMC necessary to verify the Dispersions Manufacturing Cost
provided above. Such accounting firm shall be obligated to keep any information
obtained during the audit of CMC's books and records confidential and may
confirm to Cabot only whether, and to what extent, CMC's calculations of the
Dispersions Manufacturing Cost deviate from the calculation of such accounting
firm.
3.2 Cost Savings. Cabot and CMC acknowledge that it is their intention to
decrease the costs associated with manufacturing the Products, and to share any
cost savings resulting from joint efforts therefrom equally between them. Cabot
and CMC agree to discuss, from time to time, ways to jointly decrease such
costs.
-6-
7
SECTION 4. SHIPPING, DELIVERY AND PAYMENT
(a) Orders for Products shall be issued by Cabot from time to time. Each
order shall specify the date(s) the Products are to be delivered, which date(s)
shall be not less than ten (10) business days prior to the date the order is
received by CMC. For purposes of applying Section 2.3 only, each volume of
Product shall be deemed to be in the month specified for its shipment in Cabot's
order; and if no date is specified, then in the month following the month in
which the order therefor is issued by Cabot.
(b) All sales of Products under this agreement are made F.O.B. CMC's point
of shipment. Cabot shall be responsible for all transportation costs and title
and risk of loss shall pass to Cabot upon delivery to carrier.
(c) All Products shall be prepared by CMC for delivery to Cabot in
accordance with Cabot's reasonable instructions to be supplied by Cabot to CMC
as far in advance of, and not later than ten (10) business days prior to, a
requested shipment date.
(d) CMC shall invoice Cabot for the Products delivered to Cabot during
each month by the fifteenth (15th) calendar day of the following month. CMC
shall deliver such invoices to Cabot by regular U.S. mail, or other methods such
as express U.S. mail, overnight courier or other means, if mutually acceptable.
(e) Cabot shall pay each such invoice within fifteen (15) calendar days of
receipt thereof. Such payment shall be made by check or wire transfer in readily
available same day or next day funds denominated in United States dollars. If
payment is to be made by wire transfer, Cabot shall request and CMC shall
provide to Cabot, wire transfer instructions.
SECTION 5. WARRANTIES
5.1 Warranty as to Products. CMC represents and warrants to Cabot that,
when delivered to Cabot, the Products and Services will conform in all respects
to the specifications then in effect and as then set forth in the materials
specified on Schedule A hereto. CMC MAKES NO OTHER REPRESENTATION OR WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR SERVICES, WHETHER
USED ALONE OR IN COMBINATION WITH OTHER SUBSTANCES, EVEN IF THE PURPOSES OR USES
OF SUCH PRODUCTS ARE KNOWN BY CMC.
5.2 Remedies. If any Products do not conform in all respects to the
specifications then in effect and as then set forth on Schedule A hereto, CMC
agrees to replace such Products with Products that conform to such
specifications. Subject to the
-7-
8
following sentence, Cabot shall not be obligated to accept or pay for Products
not conforming to the specifications then in effect for such Products. If such
non-conformity is the result of materials or formulae provided by Cabot to CMC,
Cabot shall pay CMC for the Services and such volumes shall be included in
determining the volumes of Products delivered by CMC to Cabot hereunder. In no
event shall CMC be responsible or liable for any special, incidental or
consequential damages arising as a result of any breach of warranty in respect
of any PRODUCTS OR Services under this Agreement or the transactions
contemplated hereby.
SECTION 6. RELATIONSHIP OF PARTIES
(a) CMC and Cabot are each independent contractors. Nothing herein
contained shall be construed to place CMC and Cabot in the relationship of
principal and agent, master and servant, partners, or joint venturers, and,
except as otherwise set forth in this Agreement, neither party shall have,
expressly or by implication, the power to represent itself as having any
authority to make contracts in the name of or binding upon the other, or to
obligate or bind the other in any manner whatsoever.
(b) Cabot recognizes and agrees that certain dispersions services shall be
performed on CMC's behalf by Davies. However, such services by Davies shall be
considered to have been subcontracted by CMC to Davies, and ultimate
responsibility for the performance of such services shall remain with CMC. Cabot
shall have no direct contractual relationship with Davies with respect to
dispersion services obtained by CMC pursuant to this Agreement.
SECTION 7. INTELLECTUAL PROPERTY AND CONFIDENTIALITTY
(a) Any intellectual property relating to the process engineering or
method of production of dispersions ("Dispersions Intellectual Property")
developed by CMC or CMIC principally in the course of performing Services for
Cabot hereunder shall be jointly owned by Cabot and either CMC or CMIC, as the
case may be. Notwithstanding the above, Cabot shall not sublicense or assign
such intellectual property to any party (other than a subsidiary or affiliate of
Cabot) for use in the production and/or sale of CMP consumables. Similarly, CMC
shall not sublicense or assign such intellectual property to any party (other
than a subsidiary or affiliate of CMC) for use in the production and/or sale of
products for use in non-CMP applications.
(b) CMC or CMIC shall, upon the request of Cabot, grant a non-exclusive
license to Cabot, in exchange for a commercially reasonable royalty payment from
Cabot to CMC or CMIC, as the case may be, to be mutually agreed between the
appropriate parties, any Dispersions Intellectual Property developed by CMC or
CMIC other than in the performance of Services but which is used by CMC or CMIC
in the production of
-8-
9
Products. Notwithstanding the above, Cabot shall not sublicense or assign such
intellectual property to any party (other than a subsidiary or affiliate of
Cabot) for use in the production and/or sale of CMP consumables.
(c) CMC and CMIC shall use their commercially reasonable best efforts,
including by seeking to have included in the Davies Agreement appropriate
provisions, to have Davies bound by the provisions of subsections (a) and (b)
above to the same extent as CMC and CMIC.
(d) Each of Cabot and CMC agree to keep confidential and not disclose, and
shall cause their respective subsidiaries and affiliates to keep confidential
and not disclose, to any party or use for any purpose (other than the
performance of this Agreement), any proprietary or other confidential
information of the other party which is received pursuant to this Agreement
("Confidential Information"). Confidential Information shall be subject to the
restrictions of this paragraph only if it is marked as confidential or
proprietary or, if not disclosed in tangible form, the disclosing party notifies
the recipient of its confidential or proprietary nature prior to its disclosure.
For purposes of this Agreement, Confidential Information of a party does not
include, and a party and a party's subsidiaries and affiliates will have no
obligations under this provision with respect to, any information of the other
party or any subsidiary or affiliate of the other party (the other party and
subsidiaries and affiliates of the other party being referred to as the
"receiving party") which:
(i) is already known to the receiving party from a source other than the
disclosing party as evidenced by competent proof thereof; or
(ii) is or becomes publicly known through no wrongful act of the
receiving party (in which event the receiving party's obligations under this
Agreement in respect thereto shall terminate on the date such information enters
the public domain); or
(iii) is rightfully received by the receiving party from a third party
without violation of any obligations of confidentiality owed by the third party
to the disclosing party; or
(iv) is disclosed by the disclosing party to a third party without
restrictions on the third party's right to use or disclose such information; or
(v) is independently developed by employees or consultants of the
receiving party without use of or reference to the disclosing party's
Confidential Information; or
(vi) is approved for release by written authorization of the disclosing
party
SECTION 8. CONSENTS; NOTICES
Unless otherwise set forth herein, whenever any notice, consent or
approval is to be given in this Agreement, it must be in writing and delivered
in accordance with the
-9-
10
provisions of this Section 8. Any such writing will be duly given upon delivery,
if delivered by hand, facsimile transmission or mail, to the following
addresses:
If to Cabot: Cabot Corporation
Business and Technical Center
Billerica, MA 01821
Attn: Fumed Metal Oxide Product Line Manager
Telecopier:
With a copy to:
Cabot Corporation
75 State Street
Boston, MA 02109
Attn: Law Department
Telecopier: 617-342-6039
If to CMC: Cabot Microelectronics Corporation
870 North Commons Drive
Aurora, IL 60504
Attn: Global Manufacturing Manager
Telecopier: 630-375-5596
or to such other address as may be designated in writing by any of the parties
from time to time in accordance herewith.
SECTION 9. GENERAL
9.1 Severability. If any provision of this Agreement shall be found to be
invalid or unenforceable, then such provision or provisions shall not invalidate
or in any way affect the enforceability of the remainder of this Agreement and
such provision or provisions shall be curtailed and limited to the extent
necessary to bring the Agreement within any legal requirement and the parties
shall negotiate in good faith with respect to an equitable modification of the
provision or application thereof held to be invalid.
9.2 Modification; Waivers. Except as expressly provided herein, this
Agreement may be modified or amended only with the written consent of each party
hereto. Neither party hereto shall be released from its obligations hereunder
without the written consent of the other party. The observance of any term of
this Agreement may be waived (either generally or in a particular instance and
either retroactively or prospectively) by the party entitled to enforce such
term, but any such waiver shall be
-10-
11
effective only if in a writing signed by the party against which such waiver is
to be asserted. Except as otherwise specifically provided herein, no delay on
the part of either party hereto in exercising any right, power or privilege
hereunder shall operate as a waiver thereof, nor shall any waiver on the part of
either party hereto of any right, power or privilege hereunder operate as a
waiver of any other right, power or privilege hereunder nor shall any single or
partial exercise of any right, power or privilege hereunder preclude any other
or further exercise thereof or the exercise of any other right, power or
privilege hereunder.
9.3 Succession. This Agreement shall be binding upon and shall inure to
the benefit of the parties hereto and their respective successors and other
legal representatives and, to the extent that any assignment hereof is permitted
hereunder, their assignees.
9.4 Counterparts. This Agreement may be executed in counterparts.
9.5 Further Assurances. Each party agrees to provide any additional
documents and take any such further action as may be reasonably requested by the
other party in order to carry out the purpose and intent of this Agreement.
9.6 Entire Agreement. This Agreement contains the full and complete
undertaking and agreement between the parties hereto with respect to the
manufacture and supply of fumed metal oxide dispersions, and supersedes all
other agreements between Cabot, on the one hand, and CMC, on the other, whether
written or oral except any confidentiality agreements between the parties, which
shall, to the extent such agreements do not contradict the terms of this
Agreement, continue in effect.
9.7 Headings. The headings of the sections and other subdivisions of this
Agreement are for convenient reference only. They shall not be used in any way
to govern, limit, modify, construe this Agreement or any part or provision
thereof nor otherwise be given any legal effect.
9.8 Assignees and Third Parties. This Agreement may not be assigned by
either party without the prior written consent of the other party and any
attempted assignment without such consent shall be null and void; provided,
however, that Cabot may assign this Agreement to a subsidiary or affiliated
company. In addition, CMC may make arrangements for the production and sale of
Services and Products required hereunder to be manufactured and sold by a
subsidiary or an affiliate, including but not limited to Cabot Microelectronics
International Corporation. Such arrangements may take the form of an assignment
of certain rights and obligations hereunder or a subcontract of certain
obligations hereunder. Similarly, Cabot may make arrangements for the purchase
of Products and Services hereunder to be made by a subsidiary, including but not
limited to Cabot Carbon Ltd. Such arrangements may take the form of an
assignment of certain
-11-
12
rights and obligations hereunder. However, all sales of Products and Services
pursuant to any such arrangement shall be governed by the terms of this
Agreement.
9.9 Governing Law. This Agreement shall be governed by and construed and
enforced in accordance with the laws of Delaware, without giving effect to
principles of conflicts or choice of laws of Delaware or of any other
jurisdiction.
9.10 Force Majeure. Each of the parties hereto shall be excused from
delays in performing or from failure to perform hereunder to the extent that
such delays or failures result from causes beyond the reasonable control of such
party, including, but not limited to, forces of nature, acts of God, strikes,
lockouts, wars, blockades, insurrections, riots, epidemics, restraints or
requirements of any government or government agency, civil disturbances,
explosions, breakage or accident to machinery or lines of pipe, unavailability
of raw material or supplies, strandings, perils of the sea, the binding order of
any court or governmental authority which has been resisted in good faith by all
reasonable means, and other cause, whether of the kind enumerated or otherwise,
not reasonably within the control of the party claiming suspension. Failure to
prevent or settle any strike shall not be considered to be a matter within the
control of the party claiming suspension. However, in order to be excused from
delay or failure to perform, such party must act diligently to remedy the cause
of such delay or failure.
-12-
13
IN WITNESS WHEREOF, the parties hereto have executed this Agreement as a
sealed instrument and have delivered this Agreement as of the day and year first
above written.
CABOT CORPORATION
By: /s/ Samuel W. Bodman
------------------------------------
Name: Samuel W. Bodman
Title: Chief Executive Officer
CABOT MICROLELECTRONICS
CORPORATION
By: /s/ Matthew Neville
------------------------------------
Name: Matthew Neville
Title: President and
Chief Executive Officer
-13-
14
SCHEDULE A
North America
Products, Materials Specifying Specifications, Formulae,
Processes, Quality Control, Maintenance
PRODUCT FORMULA CONTROL PLAN SPECIFICATION CMC TEST STANDARD MINIMUM
(REVISION (EFFECTIVE (SPECIFICATION NO./ METHODS PACKAGE ORDER
DATE) DATE/REVISION REVISION DATE) (TEST METHOD QUANTITY
LEVEL) NUMBER)
[ ] 9/19/96 8-5-96, Rev. A [ ] -10/98-Rev. 101, 200, 300, 302 55 G Poly 8 Drums
1-10/98 Drum
[ ] 1/19/00 5-1-97, Rev. A [ ] -1/0-Rev. 203, 6010A (1) 275 G Rock 2 Totes
3-1/00 Tote
[ ] 5/4/95 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 8 Drums
1-5/97 Drum
[ ] 7/5/94 8-5-96, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 8 Drums
1-5/97 Drum
[ ] 2/1/93 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 5 Drums
1-5/97 Drum
[ ] 7/5/93 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 5 Drums
1-5/97 Drum
[ ] 7/6/94 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 4 Drums
1-5/97 Drum
[ ] 7/16/93 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 6 Drums
1-5/97 Drum
[ ] 9/27/94 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 5 Drums
1-5/97 Drum
[ ] 11/18/93 10-1-97, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Poly 8 Drums
1-5/97 Drum
[ ] 8/23/96 10-1-97, Rev. A [ ]-4/98-Rev.1-5/97 101, 200, 300, 302 55 G Poly 6 Drums
Drum
-14-
15
[ ] 9/19/96 8-5-96, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 8 Drums
1-4/98 Drum
[ ] 9/19/96 8-5-96, Rev. A [ ] -4/98-Rev. 101, 200, 300, 302 55 G Fiber 6 Drums
1-4/98 Drum
[ ] 6/9/98 6-9-98, Rev. B [ ] -6/98-Rev. B 400, 404, 408 55 G Poly 5 Drums
6/98 Drum
[ ] 8/31/99 8-31-96, Rev. A [ ] -8/99-Rev. A DTM 101, 201, 55 G Poly 6 Drums
8/99 302, 303, 500, 607 Drum
[ ] 1/19/00 1-19-00, Rev. B [ ] -1/00-Rev. 1 203, 6010A (1) 275 G Rock 2800 LBS
Tote
-15-
16
SCHEDULE A
Europe
Products, Materials Specifying Specifications, Formulae,
Processes, Quality Control, Maintenance
PRODUCT FORMULA CONTROL PLAN SPECIFICATION CMC TEST STANDARD MINIMUM ORDER
(REVISION (EFFECTIVE (SPECIFICATION NO./ METHODS PACKAGE QUANTITY
DATE) DATE/REVISION REVISION DATE) (TEST METHOD
LEVEL) NUMBER)
[ ] (US-[ ]) 10-1-97 Rev. A [ ] -4/98-Rev. CTM 400, 407, 404 220 liter 1000 Kgs
5/4/95 1-5/97 Poly Drum
[ ] D1.701.013 D1.701.013 Rev. 3 D1.701.013 Rev 3 CTM 400, 407, 405 220 liter 1062 Kgs
Rev 3 23/12/99 23/12/99 23/12/99 Poly Drum
[ ] D1.701.003 D1.701.003 Rev. 2 D1.701.003 Rev.2 CTM 400, 407, 406 220 liter 1062 Kgs
Rev.2 15/12/99 15/12/99 15/12/99 Poly Drum
[ ] D1.701.005 D1.701.005 Rev. 3 D1.701.005 Rev 3 CTM 400, 407, 407 220 liter 1090 Kgs
Rev 3 16/12/99 16/12/99 16/12/99 Poly Drum
[ ] D1.701.024 D1.701.024 Rev. 2 D1.701.024 Rev. 2 CTM 400, 407, 411 220 liter 1028 Kgs
Rev. 2 16/12/99 16/12/99 Poly Drum
16/12/99
[ ] (US-A1695) 10-1-97 Rev. A A1695-4/98-Rev. CTM 400, 407, 413 220 liter 1000 Kgs
7/5/93 1-5/97 Poly Drum
[ ] D1.701.036 D1.701.036 Rev. 2 D1.701.036 Rev. 2 CTM 400, 407, 416 220 liter 1088 Kgs
Rev.2 23/12/99 23/12/99 23/12/99 Poly Drum
[ ] D1.701.037 D1.701.037 Rev. 2 D1.701.037 Rev. 2 CTM 400, 407, 417 220 liter 1088 Kgs
Rev. 2 06/01/00 06/01/00 Poly Drum
06/01/00
[ ] D1.701.038 D1.701.038 Rev. 2 D1.701.038 Rev. 2 CTM 400, 407, 418 220 liter 1460 Kgs
Rev. 2 06/01/00 06/01/00 Poly Drum
06/01/00
[ ] D1.701.040 D1.701.040 Rev, 3 D1.701.040 Rev. 3 CTM 400, 407, 420 220 liter 1090 Kgs
Rev. 3 15/12/99 15/12/99 Poly Drum
15/12/99
[ ] D1.701.002 D1.701.002 Rev. 2 D1.701.002 Rev. 2 CTM 400, 407, 424 220 liter 1240 Kgs
Rev. 2 05/01/00 05/01/00 05/01/00 Poly Drum
-16-
17
[ ] D1.701.017 D1.701.017 Rev. 2 D1.701.017 Rev. 2 CTM 400, 407, 425 220 liter 988 Kgs
Rev. 2 15/12/99 15/12/99 Poly Drum
15/12/99
[ ] D1.701.033 D1.701.033 Rev. 2 D1.701.033 Rev. 2 CTM 400, 407, 426 220 liter 1070 Kgs
Rev. 2 08/12/99 08/12/99 Poly Drum
08/12/99
-18-