1
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934 FOR THE FISCAL YEAR ENDED MARCH 31, 1998
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM TO
------------ -----------
Commission file number 0-29416
UNIFAB International, Inc.
- -------------------------------------------------------------------------------
(Exact name of registrant as specified in its charter)
Louisiana 72-1382998
- ------------------------------------- ---------------------------
(State or other jurisdiction (I.R.S. Employer
or incorporation or organization) Identification No.)
5007 Port Road
New Iberia, LA 70562
- ------------------------------------- ---------------------------
(Address of principal executive offices) (Zip Code)
(318) 367-8291
- -------------------------------------------------------------------------------
(Registrant's telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
None
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, $0.01 par value per share
---------------------------------------
(Title of Class)
Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days.
Yes X No
--- ---
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K. ____
The aggregate market value of the voting stock held by nonaffiliates of the
registrant at June 23, 1998 was approximately $72.6 million.
The number of shares of the registrant's common stock, $0.01 par value per
share, outstanding at June 23, 1998 was 5,048,655
2
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant's definitive proxy statement prepared for use in
connection with the registrant's 1998 annual meeting of shareholders to be held
August 28, 1998 have been incorporated by reference into Part III of this Form
10-K.
3
UNIFAB INTERNATIONAL, INC.
ANNUAL REPORT ON FORM 10-K FOR
THE FISCAL YEAR ENDED MARCH 31, 1998
TABLE OF CONTENTS
PAGE
----
PART I
Items 1. and 2. Business and Properties............................................... 1
Item 3. Legal Proceedings..................................................... 11
Item 4. Submission of Matters to a Vote of Security Holders................... 11
Executive Officers of the Registrant.................................. 11
PART II
Item 5. Market for Registrant's Common Equity and Related Shareholder
Matters............................................................ 12
Item 6. Selected Financial Data............................................... 13
Item 7. Management's Discussion and Analysis of Financial Condition
and Results of Operations.......................................... 14
Item 7A. Quantitative and Qualitative Disclosure About Market Risk............. 18
Item 8. Financial Statements and Supplementary Data........................... 18
Item 9. Changes in and Disagreements with Accountants on Accounting
and Financial Disclosure........................................... 18
PART III
Item 10. Directors and Executive Officers of the Registrant.................... 18
Item 11. Executive Compensation................................................ 18
Item 12. Security Ownership of Certain Beneficial Owners and Management........ 18
Item 13. Certain Relationships and Related Transactions........................ 19
PART IV
Item 14. Exhibits, Financial Statement Schedules, and Reports on Form 8-K...... 19
GLOSSARY OF CERTAIN TECHNICAL TERMS.............................................................. G-1
FINANCIAL STATEMENTS............................................................................. F-1
SIGNATURES....................................................................................... S-1
EXHIBIT INDEX.................................................................................... E-1
i
4
PART I
ITEMS 1. AND 2. BUSINESS AND PROPERTIES
Certain technical terms are defined in the "Glossary of Certain Technical
Terms" appearing at the end of this Report.
GENERAL
UNIFAB International, Inc. (together with its subsidiaries "the Company")
is an industry leader in the custom fabrication of decks and modules of
drilling and production equipment weighing up to 3,500 tons for offshore oil
and gas platforms, and has special expertise in the fabrication of decks with
complex piping requirements. Decks and modules fabricated by the Company can be
installed on fixed and floating platforms regardless of water depth. The
Company also fabricates jackets for fixed platforms; pilings and other rolled
tubular steel sections; compressor and generator packages; platform living
quarters; subsea templates; bridges for connecting offshore platforms; wellhead
protectors; and modules for the onshore petrochemical and refining industries.
In addition, the Company refurbishes and retrofits existing jackets and decks
and performs offshore piping hook-up and platform maintenance services. Through
a wholly owned subsidiary, PIM, LLC, the Company provides industrial
maintenance services and repair, refurbishment and conversion services for oil
and gas drilling rigs. Structures fabricated by the Company are installed in
oil and gas producing waters around the world, primarily the U.S. Gulf of
Mexico (the "Gulf of Mexico") and offshore West Africa. The Company's ability
to provide high quality fabrication services and maintain control over costs
has enabled it to be profitable since its founding in 1980.
Demand for the Company's services is primarily a function of worldwide
offshore oil and gas activity. Over the past five years, improvements in
production techniques and seismic and drilling technology, together with
relatively stable oil and gas prices, have resulted in accelerated drilling
activity in the Gulf of Mexico and continued strong activity levels worldwide.
Although oil prices, and to a lesser extent, gas prices have declined
significantly since the last quarter of 1997, the number of active offshore
drilling rigs worldwide has remained strong. The Company's revenue increased
146% from $27.9 million in its fiscal year ended March 31, 1995 to $68.6
million in the fiscal year ended March 31, 1998. During the same period, the
Company's workforce and direct labor hours worked increased by approximately
182% and 176%, respectively.
Due to the time required to drill an exploratory offshore well, formulate a
development plan and design offshore platforms, the fabrication and
installation of such platforms usually lag exploratory drilling by one to three
years. As a result, high levels of drilling activity worldwide, particularly in
the Gulf of Mexico, have only recently impacted the demand for the Company's
custom fabrication services. The Company believes its strong presence in both
overseas markets and the Gulf of Mexico market, coupled with continued strong
oil and gas activity in these markets, has enabled it to selectively obtain
high margin fabrication work and benefit from increased pricing levels.
1992 EXPANSION TRANSACTION. The Company's predecessor, Universal Partners,
Inc. ("Universal Partners"), was organized in 1980 by its founder, Dailey J.
Berard. In 1992, in order to expand its capabilities at the Port of Iberia and
meet increasing demand for its services, Universal Partners entered into an
agreement with McDermott Incorporated, a subsidiary of McDermott International,
Inc. Universal Partners contributed as a going concern to the then newly formed
Universal Fabricators Incorporated ("Universal Fabricators") approximately 50
acres of leased land, its buildings and fabrication equipment, and $2.4 million
in cash. McDermott contributed an inactive fabrication yard directly across a
canal from the land leased by Universal Partners, which included approximately
85 acres of land, 200,000 square feet of covered fabrication space and various
equipment. This transaction (the "Expansion Transaction") substantially
enlarged the Company's yard space and increased covered fabrication area from
25,000 square feet to approximately 225,000 square feet. In exchange for those
assets, Universal Partners received 51% of the outstanding stock of Universal
Fabricators and McDermott received 49% of the outstanding stock of Universal
Fabricators.
1
5
1997 PUBLIC OFFERING. The Company was formed in July 1997 to serve as the
parent corporation for Universal Fabricators. Prior to the completion of the
initial public offering of the Company (the "Initial Public Offering") in
September 1997, Universal Partners exchanged its shares of Universal
Fabricators common stock for 1,785,000 shares of Company Common Stock and
distributed those shares of Company Common Stock to its stockholders upon its
dissolution. McDermott also exchanged its shares of Universal Fabricators
common stock for 1,715,000 shares of Company Common Stock, which it sold in the
Initial Public Offering at the initial public offering price.
1998 ACQUISITION. The Company expanded its operations through the
acquisition of the assets and business of Professional Industrial Maintenance,
LLC effective January 1, 1998, which provides industrial plant maintenance and
construction services to the southwest Louisiana area. As part of this
acquisition, the Company also acquired lease rights to a 60-acre fabrication
yard on an industrial canal, 12 miles southwest of Lake Charles, Louisiana.
This facility has 40-foot water depth and access to the Gulf of Mexico through
the Calcasieu Ship Channel, which is maintained by the U.S. Army Corp of
Engineers.
ALLEN TANK ACQUISITION. On February 5, 1998, the Company announced that it
had signed a letter of intent with the shareholders of Allen Tank, Inc. ("Allen
Tank"). Allen Tank designs and manufactures oil and gas processing systems at
its facility located in New Iberia, Louisiana for sale world wide. Completion
of the transaction is subject to various conditions, including the satisfactory
completion of due diligence by the Company. No assurance is given that the
acquisition will be successfully completed.
DESCRIPTION OF OPERATIONS
The Company's primary activity is the fabrication of decks and modules for
offshore oil and gas drilling and production platforms. The Company has
extensive experience in the fabrication of decks and modules with complex
piping requirements and believes that its reputation for efficient, timely and
high quality production of these structures gives it a competitive advantage in
obtaining projects of this type. Using its recently completed slip, bulkhead
and load out facilities, the Company can build and load out decks and modules
weighing up to 6,000 tons. The Company also fabricates jackets for fixed
production platforms for use in up to 300 feet of water. Other structures
fabricated by the Company include pilings and other rolled tubular steel
sections; modules of drilling and production equipment; compressor and
generator packages; platform living quarters; subsea templates; bridges for
connecting offshore platforms; wellhead protectors; other structures used in
production and development activities; and modules for the onshore
petrochemical and refining industries. The Company can construct and has in the
past constructed platform drilling rigs, posted drilling rigs and barges.
FABRICATION OF DECKS AND OTHER OFFSHORE PLATFORM COMPONENTS. The Company
fabricates decks and modules for fixed and floating offshore platforms as well
as jackets for fixed offshore platforms. A fixed platform is the traditional
type of platform used for the offshore drilling and production of oil and gas.
Most fixed platforms currently in use are of the traditional jacket-type
design. Recently there has been an increase in the use of floating platforms as
a result of increased drilling and production activities in deeper waters.
Floating platforms are of three basic types: tension-leg platforms, spar
platforms and floating production facilities. See "Glossary of Certain
Technical Terms." Fixed platforms are generally better suited for shallower
water depths, whereas floating platforms, although they can be used in any
water depth, are primarily used in water depths greater than 1,000 feet.
Because they are mobile (and can therefore be reused), floating platforms are
sometimes used in water depths that could accommodate fixed platforms,
particularly where the petroleum reservoir has a relatively short production
life.
The Company also fabricates subsea templates which often form a part of a
subsea production system. Subsea production systems, which are systems that
contain primary well control equipment and rest directly on the ocean floor,
are becoming more prevalent in very deep water, in areas subject to severe
weather conditions and in smaller fields with relatively short production lives
that are located near existing pipelines and infrastructures. These systems are
generally connected to existing surface facilities, which augment subsea
hydrocarbon processing and transportation operations.
2
6
The most common type of fixed platform consists of a deck structure located
above the level of the storm waves and supported by a jacket. A jacket is a
tubular steel, braced structure extending from the mudline on the seabed to a
point above the water surface which is in turn supported on tubular steel
pilings driven deep into the seabed. The deck structure is designed to
accommodate multiple functions, including drilling, production, separating,
gathering, piping, compression, well support and crew quartering. Most fixed
platforms built today can accommodate both drilling and production operations.
These combination platforms are generally larger and more costly than
single-purpose structures. However, because directional drilling techniques
permit a number of wells to be drilled from a single platform and because
drilling and production can take place simultaneously, combination platforms
are often more cost effective.
Decks are built as either a single structure or in modular units. The
composition and quantity of petroleum in the well stream generally determine
the design of the production deck on a processing platform. Typical deck
production equipment includes crude oil pumps, gas and oil separators, gas
compressors and electricity generators. Much of this equipment involves the use
of complex piping and electrical components. The equipment, piping and controls
associated with major process subsystems are often joined together in modules
which can then be installed on the deck as a unit either on land or offshore.
Platforms can be joined by bridges to form complexes of platforms to service
very large projects and to improve safety by dividing functions among
specialized platforms. Floating platforms, like fixed platforms, support decks
or modules with equipment to perform oil and gas processing and may support
drilling operations as well.
Most of the structural steel used in the Company's operations arrives at
the Company's fabrication yards as standard steel shapes and steel plate. The
standard shapes and plate are cut to appropriate sizes or shapes and, in some
cases, rolled into tubular sections by the Company's rolling mill. These
sections are welded together into structures that become part of decks,
modules, jackets and other platform structures.
While the structural portion of a deck or module is being assembled,
process piping is fabricated in the Company's pipe shop. Piping is made into
spools by fitting and welding together pipe and pipe fittings. To the extent
possible, pipe supports and pipe spools are installed onto the various
structural subassemblies of a deck or module before final assembly. The
completed structural subassemblies are then lifted, positioned and welded
together. Finally, the oil and gas process equipment along with the remaining
pipe supports and pipe spools, valves and electrical and instrumentation
components are installed and connected. The Company has installed both carbon
and alloy steel piping in accordance with accepted industry codes and has also
installed process piping for sour gas service, which requires adherence to more
stringent industry code requirements.
The Company typically performs a wide range of testing and commissioning
activities. Virtually every contract requires as a minimum nondestructive
testing of structural and piping welds, piping hydrostatic pressure testing,
and loop testing of instrumentation and electrical systems. Commissioning of
certain process subsystems is also commonly performed by the Company. A series
of protective coatings is applied to the critical areas of the deck or module
to resist the extremely corrosive conditions in an offshore environment. The
Company generally subcontracts certain parts of the work to qualified
subcontractors, particularly electrical, instrumentation and painting.
The Company generally purchases equipment and pressure vessels to customer
specifications from qualified vendors. However, some or all of the equipment
and pressure vessels may be supplied by the customer. The Company typically
procures most of the piping, pipe fittings, valves, instrumentation and
electrical materials in accordance with the customer's specifications as part
of its contract.
Jackets are generally built in sections so that, to the extent possible,
much of their fabrication is done on the ground. As each section of legs and
bracing is completed, it is lifted by a crawler crane and then joined to
another uprighted section. When a deck, module or jacket is complete and ready
for load out, it is moved along a skidway and loaded onto a cargo barge. Using
ocean-going tugs, the barge and its cargo are transported to the offshore site
for installation by a marine construction contractor.
3
7
PLATFORM REFURBISHMENT. The Company is also active in the market for the
refurbishment of existing jackets and decks. Platform operators occasionally
remove platforms previously installed in the Gulf of Mexico and return the
platforms to a fabricator for refurbishment, which usually consists of general
repairs and maintenance work and, in some cases, modification. There are a
substantial number of structures stored by customers on Company premises,
pending instructions from the customer to commence refurbishment. Because
refurbishment is generally not time-critical, the Company is able to use this
work as a means of keeping employees productively occupied between other more
time-critical projects. Refurbishment work is most often conducted on a time
and materials basis.
DRILLING RIG REFURBISHMENT. The Company performs maintenance, refurbishment
and upgrade services on deep water drilling rigs and jack ups at its deep water
facility near Lake Charles, Louisiana. The Company intends to further develop
the capabilities of this facility to support refurbishment upgrades of jack up
and semisubmersible drilling rigs for deep water use and, as required by
customer demand, to support new construction of drilling rigs, platforms and
platform components.
PLANT MAINTENANCE. The Company has a number of employees providing
maintenance, construction and fabrication services to industrial plants in the
southwest Louisiana area. These services are performed under fixed price, time
and material, and maintenance agreement contracts, generally pursuant to
competitive bids. The number of employees providing these services varies from
time to time with the size and duration of the projects.
OFFSHORE SERVICES. The Company also has a number of employees (ranging from
approximately 25 to 50) whom it contracts to send offshore in crews to perform
piping interconnect and general maintenance and repair services on offshore
platforms. Oil and gas companies, which have traditionally performed this type
of work using their own employees, have recently been outsourcing this work and
the Company believes that this trend is likely to continue.
FACILITIES AND EQUIPMENT
FACILITIES. The Company's corporate headquarters and main fabrication yard
are located at the Port of Iberia in New Iberia, Louisiana, approximately 20
miles southeast of Lafayette, Louisiana and 30 miles north of the Gulf of
Mexico. This facility includes approximately 150 acres developed for
fabrication, one 12,000 square-foot office building that houses administrative
staff, approximately 225,000 square feet of covered fabrication area, and
approximately 25,000 square feet of warehouse storage area. The yard also has
approximately 8,000 linear feet of water frontage, of which 1,600 feet is steel
bulkhead which permits outloading of heavy structures.
The structures that the Company fabricates are transported from the New
Iberia facilities by barge to the Gulf of Mexico by offshore construction
companies. Due to the water depths of these waterways (9 to 11 feet), these
barges are currently unable to transport structures weighing over 3,500 tons.
One main route to the Gulf of Mexico, the Freshwater Bayou Channel, provides 12
feet of water depth to the Gulf of Mexico, but the dimensions of locks on this
channel prevent the transport of structures more than 80 feet in width. There
is a by-pass channel around these locks that, if usable, would permit
continuous passage to the Gulf of Mexico with at least 12 feet of water depth
at all points and without any material width restrictions. This water depth
would generally permit the transportation of structures weighing up to 6,000
tons. Due to the silt that has built up on both sides of the by-pass, the
by-pass is currently impassable without extensive dredging. On the basis of
amounts spent in the past by contractors other than the Company in order to
facilitate the transportation of certain structures, it is estimated that the
cost of dredging the silt from the by-pass and opening the by-pass channel
would be $400,000 to $500,000. Recently, the Abbeville Port Commission has
proposed that the State of Louisiana fund the reopening and dredging of the
by-pass, a project that would open the by-pass for at least one year and
possibly longer, depending upon the extent of future traffic through the
by-pass. The Company believes that there is widespread support for this
proposal and that the by-pass may be reopened within the next two years. There
can be no assurance however as to whether or when such project will be
completed or whether the increased channel depth will be maintained. If this
project is not completed by the State, the Company
4
8
would remain unable to deliver structures weighing over 3,500 tons unless it
determined to incur the additional costs described above.
The Company's facility in Lake Charles, Louisiana is located on an
industrial canal at the intersection of the Intracoastal Canal and the
Calcasieu Ship Channel, 12 miles south of Lake Charles and 20 miles from the
Gulf of Mexico. The industrial canal is dredged to a 40-foot water depth with a
bottom width of 400 feet. The facility is currently being leased from the Lake
Charles Harbor & Terminal District under a 12-year lease, including option
periods, and with options to lease up to 69 acres. The Company currently plans
to develop the facility with slip and bulkheading and covered fabrication and
warehousing facilities to support the drilling rig refurbishment operations and
develop new construction capabilities.
EQUIPMENT. The Company's main yard houses its two-inch plate roll, a
Wheelabrator grit blast system, a hydraulic press brake, and various other
equipment needed to build offshore structures and fabricate steel components.
The Company also has an automatic plate cutting machine used for cutting steel
in complex geometric sections and various other equipment used in the Company's
fabrication business. The Company also currently uses nine crawler cranes,
which range in tonnage capacity from 50 to 230 tons. Of these cranes, five are
owned by the Company and four are leased. The Company performs routine
maintenance on all of its equipment.
The Company has completed foundation and other preparatory construction for
its four-inch plate rolling mill, installation of which is expected to be
complete in July 1998. The Company's current rolling mill satisfies
approximately 80% of the Company's current needs, with the Company using
outside suppliers or other fabricators for the rest of its rolled goods. Once
completed, the new four-inch rolling mill should enable the Company to do all
of its plate rolling at its fabrication facility. This should enable the
Company to coordinate all aspects of platform construction, which can reduce
the risk of cost overruns, delays in project completion and labor costs. In
addition, the four-inch rolling mill may also be used to roll steel for other
fabricators on a subcontracting basis. The Company's grit blast system can
blast steel at a rate approximately 10 times faster than conventional
sandblasting. This greatly reduces labor costs and also decreases the Company's
use of conventional sandblasting, which is considered to be a more hazardous
and slower method of preparing steel for painting.
MATERIALS
The principal materials used by the Company in its fabrication business --
standard steel shapes, steel plate, piping, pipe fittings, valves, welding
gases, fuel oil, gasoline and paint -- are currently available in adequate
supply from many sources. The Company does not depend upon any single supplier
or source.
SAFETY AND QUALITY ASSURANCE
Management is concerned with the safety and health of the Company's
employees and maintains a safety assurance program to reduce the possibility of
costly accidents. The Company's safety department establishes guidelines to
ensure compliance with all applicable state and federal safety regulations. The
Company provides training and safety education through orientations for new
employees and subcontractors, daily crew safety meetings and first aid and CPR
training. The Company also employs several safety engineers. The Company has a
comprehensive drug testing program and conducts periodic employee health
screenings. A safety committee, whose members consist of management
representatives and peer-elected field representatives, meets monthly to
discuss safety concerns and suggestions that could prevent future accidents.
The Company has at times contracted with a third-party safety consultant to
provide training and suggestions and a licensed emergency medical technician in
its ongoing commitment to a safe and healthy work environment. The Company
believes that its safety program and commitment to quality are vital to
attracting and retaining customers and employees.
The Company fabricates to the standards of the American Petroleum
Institute, the American Welding Society, the American Society of Mechanical
Engineers and specific customer specifications. The Company uses welding and
fabrication procedures in accordance with the latest technology and industry
5
9
requirements. Training programs are conducted to upgrade skilled personnel and
maintain high quality standards. In addition, the Company maintains on-site
facilities for the x-ray of all pipe welds, which process is performed by an
independent contractor. Management believes that these programs generally
enhance the quality of its products and reduce their repair rate.
CUSTOMERS AND CONTRACTING
The Company's customers are primarily major and independent oil and gas
companies and offshore marine construction contractors. The Company's
structures are used primarily offshore West Africa and in the Gulf of Mexico.
A large portion of the Company's revenue has historically been generated by
a few customers, although not necessarily the same customers from year-to-year.
At March 31, 1998, 65% of the Company's backlog was attributable to two
projects. The following table provides information with respect to customers
who accounted for more than 10% of the Company's revenue for each of the three
fiscal years ending March 31, 1998:
YEAR ENDED MARCH 31, CUSTOMER % OF REVENUE
-------------------- -------- ------------
1998 Shell Offshore, Inc., Bouygues Offshore 44
1997 Bouygues Offshore, McDermott-ETPM West, Inc.* 61
1996 Mobil Producing Nigeria Unlimited, Shell
Offshore, Inc. 64
* McDermott-ETPM West, Inc. was a joint venture between an affiliate of
McDermott and a third party.
Although the Company's direct customers on many projects are installation
contractors, each project is ultimately fabricated for use by an oil and gas
company. The Company, from time to time, contracts with multiple installation
contractors who may be supplying structures to the same oil and gas company
and, in some instances, contracts directly with the oil and gas companies.
Thus, concentration among the Company's customers may be greater when the
customer is viewed as the oil and gas company rather than the installation
contractor.
Because the level of fabrication that the Company may provide, directly or
indirectly, to any particular oil and gas company depends, among other things,
on the size of that company's capital expenditure budget devoted to platform
construction in a particular year and the Company's ability to meet the
customer's delivery schedule, companies that account for a significant portion
of the Company's revenue in one fiscal year may represent an immaterial portion
of revenue in subsequent years. The level of fabrication that the Company may
provide as a subcontractor to an offshore construction company depends, among
other things, on the ability of that company to successfully obtain prime
contracts with oil and gas companies and the ability of the Company to meet the
delivery schedule of the prime contractor. Thus, the prime contractors who
account for a significant portion of revenue in one fiscal year may represent
an immaterial portion of revenue in subsequent years. However, the loss of any
significant customer (whether an oil and gas company with which the Company
directly contracts or a prime contractor for which the Company has provided
services on a subcontract basis) for any reason, including a sustained decline
in an oil and gas company's capital expenditure budget or the prime
contractor's inability to successfully obtain contracts, or other competitive
factors, could result in a substantial loss of revenue and have a material
adverse effect on the Company's operating performance.
Most of the Company's projects are awarded on a fixed-price basis, and
while customers may consider other factors, including the availability,
capability, reputation and safety record of a contractor, price and the ability
to meet a customer's delivery schedule are the principal factors on which the
Company is
6
10
awarded contracts. The Company's contracts generally vary in length from one
month to 18 months depending on the size and complexity of the project.
Under fixed-price contracts, the Company receives the price fixed in the
contract, subject to adjustment only for change orders placed by the customer.
As a result, with respect to fixed-price contracts, the Company retains all
cost savings but is also responsible for all cost overruns. Under time and
materials arrangements, the Company receives a specified hourly rate for direct
labor hours worked (which exceeds its direct labor costs) and a specified
percentage mark-up over its cost for materials. As a result, under time and
materials contracts, the Company is protected against cost overruns but does
not benefit directly from cost savings. As the Company is typically able to
obtain prices for materials in excess of its costs, the cost and productivity
of the Company's labor force are the key factors affecting the Company's
operating profits. Consequently, it is essential that the Company control its
costs and maximize the productivity of its workforce. Each project is reviewed
on at least a weekly basis by the Company's top management to insure that
difficulties and cost overruns can be identified early in the project and
corrected. Although no assurance can be given that the Company will realize
profits on its current or future contracts, the Company believes that the
active involvement of its top management reduces the likelihood of significant
cost overruns.
COMPETITION
The offshore platform fabrication industry is highly competitive and
influenced by events largely outside of the control of offshore platform
fabrication companies. Since 1992, there has been a consolidation in the
industry as several marine construction companies have combined with other
companies or ceased operations altogether. As a result of this consolidation,
there are approximately eight remaining domestic competitors for custom
fabrication projects, several of which are substantially larger and have
greater resources and capabilities than the Company. These companies compete
intensely for available projects, which are generally awarded on a competitive
bid basis with customers usually requesting bids on projects one to three
months prior to commencement. For international projects, the Company competes
with many of the same domestic fabricators, as well as with several foreign
fabricators, some of which are substantially larger and have greater financial
resources and capabilities than the Company.
The Company's marketing staff contacts offshore construction contractors
and oil and gas companies to obtain information as to upcoming projects so that
the Company will be well positioned to bid for the projects. Although price and
the contractor's ability to meet a customer's delivery schedule are the
principal factors in determining which qualified fabricator is awarded a
contract for a project, customers also consider, among other things, the
availability of technically capable personnel and facility space, a
fabricator's efficiency, condition of equipment, reputation, safety record and
customer relations. The Company believes that the limited availability of
experienced supervisory and management personnel, as well as skilled laborers,
presents the greatest barrier to entry to new companies trying to enter the
fabrication industry.
The Company believes that its competitive pricing, expertise in fabricating
offshore marine structures and its long-term relationships with international
customers will enable it to continue to compete effectively for projects
destined for international waters. The Company recognizes, however, that
foreign governments often use subsidies and incentives to create jobs where oil
and gas production is being developed. The additional transportation costs that
will be incurred when exporting structures from the U.S. to foreign locations
may hinder the Company's ability to successfully bid for projects against
foreign competitors. Because of subsidies, import duties and fees, taxes on
foreign operators and lower wage rates in foreign countries along with
fluctuations in the value of the U.S. dollar and other factors, the Company may
find it increasingly difficult to remain competitive with foreign contractors
for projects designed for use in international waters.
7
11
BACKLOG
As of March 31, 1998, the Company's backlog was approximately $26.4
million, all of which management expects to be performed by April 1999. Of the
Company's backlog at March 31, 1998, 65% was attributable to two projects.
The Company's backlog is based on management's estimate of the remaining
labor, material and subcontracting costs to be incurred with respect to those
projects as to which a customer has authorized the Company to begin work or
purchase materials pursuant to written contracts, letters of intent or other
forms of authorization. Often, however, original contract prices are based on
incomplete engineering and design specifications. As engineering and design
plans are finalized or changes to existing plans are made, the total contract
price to complete such projects is likely to change. In addition, most projects
currently included in the Company's backlog are subject to termination at the
option of the customer, although the customer in that case is generally
required to pay the Company for work performed and materials purchased through
the date of termination and, in some instances, pay the Company termination
fees.
GOVERNMENT AND ENVIRONMENTAL REGULATION
Many aspects of the Company's operations and properties are materially
affected by federal, state and local regulation, as well as certain
international conventions and private industry organizations. The exploration
and development of oil and gas properties located on the outer continental
shelf of the United States is regulated primarily by the MMS. The MMS has
promulgated federal regulations under the Outer Continental Shelf Lands Act
requiring the construction of offshore structures located on the outer
continental shelf to meet stringent engineering and construction
specifications. The Company is not directly affected by regulations applicable
to offshore construction operations as are its customers which install and
operate the structures fabricated by the Company, but the Company is required
to construct these structures in accordance with customer design which must
comply with applicable regulations; to the extent such regulations
detrimentally affect customer activities, the operations of the Company may be
adversely affected. Violations of the laws and related regulations directly
affecting the Company's operations can result in substantial civil and criminal
penalties as well as injunctions curtailing operations. The Company believes
that its operations are in compliance with these and all other laws and related
regulations affecting the fabrication of structures for delivery to the outer
continental shelf of the United States and the laws and related regulations
governing other areas of the world. In addition, the Company depends on the
demand for its services from the oil and gas industry and, therefore, is
affected by changing taxes, price controls and other laws and regulations
relating to the oil and gas industry. In addition, offshore construction and
drilling in certain areas have been opposed by environmental groups and, in
certain areas, have been restricted or prohibited. To the extent laws or
regulations are enacted or other governmental actions are taken that prohibit
or restrict offshore construction and drilling or impose environmental
protection requirements that result in increased costs to the oil and gas
industry in general and the offshore construction industry in particular, the
business and prospects of the Company could be adversely affected, although
such restrictions in the areas where the Company's products are used have not
been substantial. The Company cannot determine to what extent future operations
and earnings of the Company may be affected by new legislation, new regulations
or changes in existing laws or regulations.
The Company's operations and properties are subject to a wide variety of
increasingly complex and stringent federal, state and local environmental laws
and regulations, including those governing discharges into the air and water,
the handling and disposal of solid and hazardous wastes, the remediation of
soil and groundwater contaminated by hazardous substances, and the health and
safety of employees. These laws may provide for "strict liability" for damages
to natural resources and threats to public health and safety, rendering a party
liable for environmental damage without regard to negligence or fault on the
part of such party. Sanctions for noncompliance may include revocation of
permits, corrective action orders, cease and desist orders, administrative or
civil penalties and criminal prosecution. Certain environmental laws provide
for strict joint and several liability, without regard to fault or negligence,
for remediation of spills and other releases of hazardous substances. In
addition, the Company may be subject to claims alleging personal injury,
property damage or natural resource damage as a result of the handling of
hazardous
8
12
substances. Such laws and regulations may also expose the Company to liability
for the conduct of or conditions caused by others, or for acts of the Company
that were in compliance with all applicable laws at the time such acts were
performed.
The Comprehensive Environmental Response, Compensation, and Liability Act
of 1980, as amended, and similar laws provide for responses to and liability
for releases of hazardous substances into the environment. Additionally, the
Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act,
the Safe Drinking Water Act, the Emergency Planning and Community Right to Know
Act, each as amended, and similar state or local counterparts to these federal
laws, regulate air emissions, water discharges, hazardous substances and
wastes, and require public disclosure related to the use of various hazardous
substances. Compliance with such environmental laws and regulations requires
the acquisition of permits and other authorizations for certain activities and
compliance with various standards and procedural requirements.
The Company is currently in the process of applying for certain permits
from the Louisiana Department of Environmental Quality for its facilities and
upgrading its general environmental compliance. These permits are necessary for
the operation of certain facilities in accordance with environmental
requirements. While there can be no assurance that the permits will be issued,
management believes that the Company will be able to obtain the required
permits and bring its facilities into substantial compliance with current
regulatory standards without material effect to its operations. The Company has
budgeted $150,000 for the costs of completing the necessary environmental
permitting and compliance matters.
In addition to the Company's operations, in the past other industrial
operations have been conducted by other entities on the properties now utilized
by the Company. Although the Company does not believe that there are any
material remediation requirements on its properties, it is possible that these
past operations may have caused unknown environmental conditions to exist that
might in the future require remediation.
The Company's operations are also governed by laws and regulations relating
to workplace safety and worker health, primarily the Occupational Safety and
Health Act and regulations promulgated thereunder. In addition, various other
governmental and quasi-governmental agencies require the Company to obtain
certain miscellaneous permits, licenses and certificates with respect to its
operations. The kind of permits, licenses and certificates required in the
Company's operations depend upon a number of factors. The Company believes that
it has all such miscellaneous permits, licenses and certificates that are
material to the conduct of its existing business.
The Company's efforts to comply with the laws and regulations discussed in
this section have entailed certain additional expenses and changes in operating
procedures. These expenses have not been substantial over the past ten years,
and the Company believes that, except for the amount budgeted for permitting
matters as discussed above, compliance with these laws and regulations will not
have a material adverse effect on the Company's business or financial condition
for the foreseeable future. However, future events, such as changes in existing
laws and regulations or their interpretation, more vigorous enforcement
policies of regulatory agencies, stricter or different interpretations of
existing laws and regulations or adoption of new laws and regulations, may
require additional expenditures by the Company, which expenditures may be
material.
The Company also has employees engaged in offshore operations which are
covered by provisions of the Jones Act, the Death on the High Seas Act and
general maritime law, which laws operate to make the liability limits
established under state workers' compensation laws (which are applicable to the
Company's other employees) inapplicable to these employees and, instead, permit
them or their representatives to pursue actions against the Company for damages
or job related injuries, with generally no limitations on the Company's
potential liability.
In addition to government regulation, various private industry
organizations, such as the American Petroleum Institute, the American Society
of Mechanical Engineers and the American Welding Society, promulgate technical
standards that must be adhered to in the fabrication process.
9
13
INSURANCE
The Company maintains insurance against property damage caused by fire,
flood, explosion and similar catastrophic events that may result in physical
damage or destruction to the Company's facilities. The Company also maintains
general liability insurance, workers' compensation liability and maritime
employer's liability insurance. All policies are subject to deductibles and
other coverage limitations. Although management believes that the Company's
insurance is adequate, there can be no assurance that the Company will be able
to maintain adequate insurance at rates which management considers commercially
reasonable, nor can there be any assurance such coverage will be adequate to
cover all claims that may arise.
EMPLOYEES
During the fiscal year ended March 31, 1998, the number of Company
employees increased by 164 full-time production employees to 578 at year end,
which includes 139 at the PIM, LLC facility. The Company also engages the
services of subcontractors. Management estimates that these subcontractors
provide from time to time approximately 50 to 125 workers to perform certain
tasks in connection with the Company's projects. None of the Company's
employees is employed pursuant to a collective bargaining agreement, and the
Company believes that its relationship with its employees is good.
The Company's ability to remain productive and profitable depends
substantially on its ability to attract and retain skilled construction
workers, primarily welders, fitters and equipment operators. In addition, the
Company's ability to expand its operations depends primarily on its ability to
increase its workforce. The demand for such workers is high, and the supply is
extremely limited. While the Company believes its relationship with its skilled
labor force is good, a significant increase in the wages paid by competing
employers could result in a reduction in the Company's skilled labor force,
increases in the wage rates paid by the Company, or both. If either of these
occurs, in the near-term, the profits expected by the Company from work in
progress could be reduced or eliminated and, in the long-term, to the extent
such wage increases could not be passed on to the Company's customers, the
production capacity of the Company could be diminished and the growth potential
of the Company could be impaired.
The Company has taken an active role in the movement to create a more
business-oriented educational system in Louisiana. For example, Dailey J.
Berard, the Company's President, Chief Executive Officer and Chairman of the
Board, has been appointed by Louisiana Governor Mike Foster to the Louisiana
Workforce Commission, a group consisting of 25 members, 11 of whom are
representatives of business and industry. This Commission, which was
established by recent Louisiana legislation, will oversee the spending of $400
million in job training funds appropriated by the legislature. The Commission
will coordinate federal worker training programs, exercise authority over
policy and funding decisions for worker training programs, oversee an
occupational information system, and create regional employer-oriented
workforce boards. Although there can be no assurance that such initiatives will
enable the Company to meet its hiring needs, management believes that, in the
long-term, initiatives like these are the best methods for increasing the pool
of skilled workers from which it can draw employees.
CAUTIONARY STATEMENT CONCERNING FORWARD-LOOKING INFORMATION
Certain statements included in this report and in oral statements made from
time to time by management of the Company that are not statements of historical
fact are forward-looking statements. In this report, forward-looking statements
are included primarily in the sections entitled "Business and Properties,"
"Legal Proceedings," and "Management's Discussion and Analysis of Financial
Condition and Results of Operation." The words "expect," "believe,"
"anticipate," "project," "plan," "estimate," "predict," and similar expressions
often identify forward-looking statements. All such statements are subject to
factors that could cause actual results and outcomes to differ materially from
the results and outcomes predicted in the statements and investors are
cautioned not to place undue reliance upon them.
10
14
ITEM 3. LEGAL PROCEEDINGS
The Company is a party to various routine legal proceedings primarily
involving commercial claims, workers' compensation claims, and claims for
personal injury under the General Maritime Laws of the United States and the
Jones Act. While the outcome of these lawsuits, legal proceedings and claims
cannot be predicted with certainty, management believes that the outcome of all
such proceedings, even if determined adversely, would not have a material
adverse effect on the Company's business or financial condition.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
Not applicable.
EXECUTIVE OFFICERS OF THE REGISTRANT
Listed below are the names, ages and offices of each of the executive
officers of the Company as of June 1, 1998:
NAME AGE POSITION
---- --- --------
Dailey J. Berard..... 68 President, Chief Executive Officer and
Chairman of the Board
David J. Berard...... 51 Vice President-Operations
Peter J. Roman....... 47 Vice President and Chief Financial
Officer
Dailey J. Berard has served as President, Chief Executive Officer and
Chairman of the Board of the Company since its founding in 1980. He was trained
as a civil engineer and has over 45 years of experience in the oil service
industry, working with several different companies, including Houston-New
Orleans, Inc., Houston Systems Manufacturing Company and Norman Offshore
Pipelines, Inc. Mr. Berard and David J. Berard are brothers.
David J. Berard has been employed by the Company since 1981. Prior to his
appointment to Vice President - Operations in May 1998, he served as the
Company's Vice President - Domestic Sales. Mr. Berard held various positions
with the Company since he joined the Company in 1981, including Corporate
Secretary from 1992 to 1995. From 1978 to 1981, he served as the district
manager for the fabrication yard of Waukesha Pearce Industries, and from 1973
to 1978 served as the General Superintendent of Fabrication for Houston Systems
Manufacturing Company. Mr. Berard and Dailey J. Berard are brothers.
Peter J. Roman was appointed Vice President and Chief Financial Officer on
June 30, 1997. Since June 1984, Mr. Roman has been a certified public
accountant with the international accounting firm of Ernst & Young LLP, most
recently as a senior manager. Mr. Roman graduated from Louisiana State
University in 1984 with a B.S. in Accounting and is a member of the Louisiana
State Society of Certified Public Accountants and the American Institute of
Certified Public Accountants.
11
15
PART II
ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED SHAREHOLDER MATTERS
The Company's Common Stock, $.01 par value per share (the "Common Stock"),
is traded on the Nasdaq National Market under the symbol "UFAB." At June 1,
1998, the Company had approximately 3,600 holders of its Common Stock of record
and individual participants in security position listings.
The following table sets forth the high and low bid prices per share of the
Common Stock, as reported by the Nasdaq National Market, for each fiscal
quarter since trading in the Common Stock began of September 19, 1998.
Fiscal Year 1998 HIGH LOW
---------------- ---- ---
Second Quarter (commencing September 19, 1997) $41.00 $28.88
Third Quarter $43.88 $15.88
Fourth Quarter $20.88 $13.38
The Company intends to retain earnings, if any, to meet its working capital
requirements and to finance the future operations and growth of its business
and, therefore, does not plan to pay any cash dividends to holders of its
Common Stock in the foreseeable future.
12
16
ITEM 6. SELECTED FINANCIAL DATA
The selected financial and other data set forth below should be read in
conjunction with the consolidated financial statements of the Company and the
notes thereto and "Management's Discussion and Analysis of Financial Condition
and Results of Operations" included elsewhere in this Form 10-K.
YEAR ENDED MARCH 31,
---------------------------------------------------------------------------------
1994 1995 1996 1997 1998
------------- ------------- ------------- ------------- -------------
(DOLLARS IN THOUSANDS, EXCEPT PER SHARE DATA)
Income Statement Data:
Revenue ................................... $ 29,926 $ 27,883 $ 51,807 $ 66,724 $ 68,564
Cost of revenue ........................... 27,211 23,174 40,362 58,589 57,789
------------- ------------- ------------- ------------- -------------
Gross profit .............................. 2,715 4,709 11,445 8,135 10,775
General and administrative expense ........ 1,228 1,326 1,419 1,637 2,967
------------- ------------- ------------- ------------- -------------
Operating income .......................... 1,487 3,383 10,026 6,498 7,808
Other income (expense), net ............... 21 38 315 82 467
------------- ------------- ------------- ------------- -------------
Income before income taxes ................ 1,508 3,421 10,341 6,580 8,275
Income tax expense ........................ 555 1,286 3,888 2,555 2,896
------------- ------------- ------------- ------------- -------------
Net income ................................ $ 953 $ 2,135 $ 6,453 $ 4,025 $ 5,379
============= ============= ============= ============= =============
Basic and diluted earnings per share ...... $ 0.27 $ 0.61 $ 1.84 $ 1.15 $ 1.25
============= ============= ============= ============= =============
Diluted earnings per share weighted average
shares (1) .............................. 3,500 3,500 3,500 3,500 4,313
Cash dividends declared per common share(2) -- $ 0.25 $ 0.55 $ 1.66 $ 1.03
Other Financial Data:
Depreciation and amortization ............. $ 381 $ 424 $ 390 $ 471 $ 735
Capital expenditures ...................... 110 179 402 821 5,008
Net cash provided by(used in)operating
activities .............................. (480) 3,392 4,285 2,328 5,310
Net cash provided by (used in)investing
activities .............................. (110) (170) (394) (803) (9,792)
Net cash provided by (used in)financing
activities .............................. $ 531 $ (1,389) $ (1,921) $ (5,807) $ 12,201
Operating Data:
Direct labor hours worked ................. N/A (3) 436,000 656,000 902,000 1,173,000
Number of employees (at end of period) .... 215 205 319 414 578
Backlog (at end of period) ................ $ 8,917 $ 31,994 $ 42,311 $ 30,221 $ 26,377
AS OF MARCH 31,
-----------------------------------------------
1994 1995 1996 1997 1998
------ ------- ------- ------- -------
(IN THOUSANDS)
Balance Sheet Data:
Working capital....................... $4,187 $ 5,877 $10,333 $ 8,192 $16,403
Property, plant and equipment, net.... 5,243 4,986 4,999 5,341 10,802
Total assets.......................... 14,318 16,173 23,714 26,154 44,410
Debt.................................. 531 -- -- -- --
Shareholders' equity.................. 8,175 9,452 13,984 12,201 33,022
- ----------
(1) All amounts have been presented under FASB Statement No. 128, Earnings Per
Share, which the Company was required to adopt in December 1997.
(2) Under the provisions of a shareholders' agreement, unless otherwise
approved by the board of directors, the Company was to distribute to the
shareholders 90% of its net income for the prior fiscal year. This
agreement was terminated upon completion of the Initial Public Offering.
The Company intends to retain earnings, if any, to meet its working
capital requirements and to finance the future operation and growth of its
business and, therefore, does not plan to pay cash dividends to holders of
its common stock in the foreseeable future.
(3) Information is not available.
13
17
ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS
GENERAL
The Company's results of operations depend primarily on (i) the level of
oil and gas exploration and development activity of oil and gas companies in
the Gulf of Mexico and offshore West Africa; (ii) the Company's ability to win
contracts through competitive bidding; and (iii) the Company's ability to
manage those contracts to successful completion. The level of exploration and
development activity is related to several factors, including trends of oil and
gas prices, exploration and production companies' expectations of future oil
and gas prices and changes in technology which reduce costs and improve
expected returns on investment. Over the past five years, favorable trends in
these factors have led to increased offshore exploration and development
activity. In addition to more stable oil and gas prices, improvements in
three-dimensional seismic, directional drilling, production techniques and
other advances in technology have increased drilling success rates and reduced
costs. The number of active offshore drilling rigs worldwide is at its highest
point since 1986. In addition, the number of leases of exploratory tracts in
the Gulf of Mexico sold to oil and gas companies by the MMS also has been at
record levels.
Lease sales and awards of offshore concessions generally serve as
precursors to drilling and exploration activity and, in turn, increased levels
of offshore drilling and exploration activity generally serve as precursors to
increased demand for platform construction. Due to the time required to drill
an exploratory offshore well, formulate a comprehensive development plan and
design offshore platforms, the fabrication and installation of such platforms
usually lag exploratory drilling by one to three years. As a result, the high
levels of drilling activity worldwide, particularly in the Gulf of Mexico, have
only recently impacted the demand for the Company's custom fabrication
services, with revenue increasing annually. There can be no assurance, however,
that drilling activity will continue at such levels or that oil and gas
companies will actively explore and develop the fields recently leased. Whether
these trends continue and the resulting increase in demand for the Company's
services actually occurs is dependent in large part on the factors listed
above.
During the fiscal years ended March 31, 1996, 1997 and 1998, 58%, 64% and
23%, respectively, of the Company's revenue was derived from structures
fabricated for installation in international areas, with the remainder designed
for installation in the Gulf of Mexico. The Company believes that its strong
presence in both overseas markets and the Gulf of Mexico market, coupled with
continued strong oil and gas activity in these markets, has enabled it to
selectively obtain high-margin fabrication work and to benefit from increased
pricing levels. The Company further believes that the increased activity level
in the Gulf of Mexico will lead to an increasing percentage of the Company's
revenue coming from projects intended for installation in the Gulf of Mexico.
The Company has historically attempted to manage its backlog in order to
benefit from pricing trends. In periods of rising prices, the Company
intentionally avoids building high levels of backlog in order to maximize its
ability to pursue higher margin projects. The Company believes that, as a
low-cost fabricator, it is well positioned to benefit from this strategy.
Barges loaded with completed structures weighing up to 3,500 tons can
travel through any of several currently available water routes from the
Company's facilities at the Port of Iberia to the Gulf of Mexico. Although
recent improvements to the Company's slip, bulkhead and loadout facilities
enable the Company to produce decks and deck components exceeding 3,500 tons,
special efforts, including dredging, would be needed to permit barges carrying
structures from 3,500 to 6,000 tons to travel from the Port of Iberia facility
to the Gulf of Mexico, and this would add costs to the project that the
customer may not be willing to bear. Although the Company does not produce
jackets designed for water depths over 300 feet as they are too heavy or too
wide to be transported from the Company's facilities, the increased activity in
the deepwater areas of the Gulf of Mexico has benefited the Company's
operations as the Company is able to fabricate decks and modules weighing up to
3,500 tons for installation on platforms regardless of water depth.
Most of the Company's fabrication work is performed pursuant to fixed-price
contracts, although some projects are performed on a time and materials basis.
Under fixed-price contracts, the Company receives
14
18
the price fixed in the contract, subject to adjustment only for change orders
placed by the customer. As a result, with respect to fixed-price contracts, the
Company retains all cost savings but is also responsible for all cost overruns.
Under time and materials arrangements, the Company receives a specified hourly
rate for direct labor hours worked (which exceeds its direct labor costs) and a
specified percentage mark-up over its cost for materials. As a result, under
time and materials contracts, the Company is protected against cost overruns but
does not benefit directly from cost savings. As the Company is typically able to
obtain prices for materials in excess of its costs, the cost and productivity of
the Company's labor force are the key factors affecting the Company's operating
profits. Consequently, it is essential that the Company control its costs and
maximize the productivity of its workforce.
The following table sets forth for the periods presented the percentage of
the Company's revenue derived from each type of contract used by the Company:
YEAR ENDED MARCH 31,
TYPE OF CONTRACT(1) 1996 1997 1998
- ---------------------------- ----- ----- -----
Fixed-Price................. 76.2% 81.0% 69.9%
Time and Materials.......... 23.7% 18.9% 30.0%
- ----------
(1) Remaining revenues were derived from storage fees.
The ability of the Company to operate profitably and to expand its
operations depends substantially on its ability to attract skilled production
workers, primarily welders, fitters and equipment operators. While the supply
of production workers is limited, the demand for their services has increased
as oil and gas development and production activity has increased. As a result,
the Company has increased the average hourly wages of its employees, instituted
a 401(k) plan and improved several other benefit packages available to its
employees. The Company has also been very active in the movement to create a
more business-oriented educational system in Louisiana, which lead to the
passage of a recent bill that aims to give industry more input in the teaching
at vocational-technical schools. Although there can be no assurance that such
initiatives will be carried out to successful completion, management believes
that, in the long-term, initiatives like these are the best methods for
increasing the pool of well-trained workers in Louisiana.
The Company's operations are subject to seasonal variations in weather
conditions and daylight hours. Because most of the Company's construction
activities take place outdoors, the number of direct labor hours worked
generally declines in winter months due to an increase in rainy and cold
conditions and a decrease in daylight hours. Operations may also be affected by
the rainy weather, hurricanes and other storms prevalent along the U.S. Gulf
Coast throughout the year. As a result, the Company's revenue, gross profit and
net income during the fourth quarter of each fiscal year are subject to being
disproportionately low as compared to the first and second quarters, and full
year results may not in all cases be a direct multiple of any particular
quarter or combination of quarters. The Company's results for the last three
years do not dramatically reflect this effect due to (i) the large amount of
revenue and income recognized in the third and fourth quarters of 1996 on one
particular project, (ii) the substantial increase in production volume that
began in the third quarter of 1996, and (iii) the acquisition of PIM, LLC in
the fourth quarter of 1998. The table below indicates for each quarter of the
Company's last three fiscal years the percentage of annual revenue and net
income earned and the number of direct labor hours worked in each quarter.
15
19
1996 1997 1998
------------------------- ------------------------ ------------------------
1ST. 2ND 3RD 4TH 1ST. 2ND 3RD 4TH 1ST. 2ND 3RD 4TH
QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR.
--- --- --- --- --- --- --- --- --- --- --- ---
Revenue ................. 17% 26% 27% 30% 28% 27% 22% 23% 23% 26% 20% 31%
Net income .............. 6% 15% 32% 47% 27% 28% 21% 24% 21% 24% 23% 32%
Direct labor hours worked
(in thousands) ........ 126 143 194 193 218 242 206 236 260 265 231 417
Most of the Company's revenue and expenses are recognized on a
percentage-of-completion basis determined by the ratio that labor and
subcontracting costs incurred bear to the total estimated labor and
subcontracting costs required for completion. Accordingly, expected labor and
subcontracting costs are reviewed monthly as the work progresses, and
adjustments proportionate to the percentage of completion are reflected in
revenue for the period when such estimates are revised. To the extent that
these adjustments result in a reduction of previously reported profits, the
Company would have to recognize a charge against current earnings, which may be
significant depending on the size of the project or the adjustment. Revenue
from time and materials contracts is recognized on the basis of direct labor
hours worked at fixed hourly rates and the cost of materials or subcontract
costs incurred plus mark-up.
RESULTS OF OPERATIONS
Comparison of the Years Ended March 31, 1998 and 1997
During the year ended March 31, 1998, the Company's revenue was $68.6
million, a 2.8% increase from the $66.7 million generated in the year ended
March 31, 1997. This increase was primarily caused by prices realized under
fixed-price contracts, an increase in direct labor hours worked and revenues in
the fourth quarter generated from PIM, LLC. Although direct labor hours worked
increased 30% in fiscal 1998 over fiscal 1997, this increase did not result in a
proportionate increase in revenue due to the reduction in procurement revenue in
fiscal 1998 compared to procurement revenue in fiscal 1997.
Cost of revenue was $57.8 million in fiscal 1998 compared to $58.6 million
in fiscal 1997. These costs decreased as a percentage of revenues to 84.3% in
1998 from 87.8% in fiscal 1997. This relative decrease is mainly due to the
reduced procurement revenue in 1998 compared to 1997, as described above, which
carried lower margin.
General and administrative expense was $3.0 million in fiscal 1998 compared
to $1.6 million in fiscal 1997. The Company's general and administrative
expense as a percentage of revenue increased to 4.3% in 1998 as compared to
2.5% in fiscal 1997. This increase is mainly due to regulatory, reporting and
other costs associated with being a corporation with publicly traded securities
and the additional general and administrative costs in the fourth quarter of
fiscal 1998 associated with PIM, LLC.
Interest income increased to $522,000 in fiscal 1998 from $145,000 in
fiscal 1997, as the weighted average of invested funds was higher in fiscal
1998 as compared to fiscal 1997, mainly from investment of the net proceeds of
the Company's initial public offering.
Comparison of the Years Ended March 31, 1997 and 1996
During the year ended March 31, 1997, the Company's revenue was $66.7
million, a 28.8% increase from the $51.8 million generated in the year ended
March 31, 1996. This increase was primarily caused by an increase in direct
labor hours worked and, to a lesser extent, prices realized under fixed-price
contracts. Although direct labor hours worked increased 37.5% in fiscal 1997
over fiscal 1996, this increase did not result in a proportionate increase in
revenue due to the lower productivity of employees newly hired in fiscal 1997
compared to the productivity of the Company's longer term employees.
Cost of revenue was $58.6 million in fiscal 1997 compared to $40.4 million
in fiscal 1996. These costs increased as a percentage of revenues to 87.8% in
1997 from 77.9% in fiscal 1996. In fiscal 1996, a major contract obtained on a
fixed-price basis was completed at a materials cost substantially lower than
that
16
20
estimated in connection with the bid, which the Company had prepared on the
basis of the customer's designs. Had the contract been completed at the
materials cost originally estimated, cost of revenue during fiscal 1996 would
have been increased by approximately $5.5 million.
General and administrative expense was $1.6 million in fiscal 1997 compared
to $1.4 million in fiscal 1996. The Company's general and administrative
expense as a percentage of revenue decreased to 2.5% in 1997 as compared to
2.7% in fiscal 1996 as the increase in the Company's revenue did not require a
proportionate increase in such expenses.
Interest income decreased to $145,000 in fiscal 1997 from $318,000 in
fiscal 1996, as the weighted average of invested funds was lower in fiscal 1997
as compared to fiscal 1996, due to longer than average delays in collecting
some international receivables in 1997.
Receivables increased in fiscal 1997 primarily because of delays in
collection of receivables from contractors on projects installed in overseas
locations.
LIQUIDITY AND CAPITAL RESOURCES
Historically, the Company has funded its business activities through funds
generated from its operations. Net cash provided by operations was $4.3
million, $2.3 million and $5.3 million for the years ended March 31, 1996, 1997
and 1998, respectively. The Company's capital requirements historically have
been for improvements to its facilities and equipment to increase the
productivity of its labor force. During fiscal 1997 and fiscal 1998, the
Company had capital expenditures of $821,000 and $5,008,000, respectively.
Capital expenditures for fiscal 1998 primarily included the dredging and
construction of a new slip and loadout facilities for the slip, the purchase of
the Company's administrative office and surrounding land from McDermott, the
expansion of the Company's pipe shop, and the purchase from Universal Partners
of 10 acres of land adjacent to the Company's facility.
On September 22, 1997, the Company entered into an unsecured credit
facility (the "Credit Facility") with a commercial lender, which provides for
up to $10.0 million in borrowings for general corporate purposes and for
letters of credit up to $10.0 million under a revolving credit facility.
Borrowings under the revolving credit facility bear interest at the prime
lending rate established by Chase Manhattan Bank, N.A. or LIBOR plus 2.0%, at
the Company's option. The fee for issued letters of credit is 7/8 of 1% per
annum on the principal amount of the letter of credit. The unused commitment
fee is 3/8 of 1% per annum. The revolving credit facility matures August 31,
2000. At March 31, 1998, the Company had no letters of credit and no borrowings
outstanding under the revolving credit facility. The Credit Facility also
provides for replacement of several letters of credit under a nonrevolving
letter of credit facility. These letters of credit, which aggregate $4.8
million, were previously provided by McDermott (the "McDermott Letters of
Credit"). The nonrevolving letter of credit facility will be reduced upon the
respective expiration dates of the letters of credit issued to replace the
McDermott Letters of Credit, the last of which is scheduled to expire in
January 2000.
On February 5, 1998, the Company announced that it had signed a letter of
intent with the shareholders of Allen Tank, Inc. ("Allen Tank") to acquire
Allen Tank. The transaction is expected to be accounted for by the pooling of
interests method of accounting for business combinations and is expected to be
tax-free to the shareholders of the Company and of Allen Tank. Allen Tank
designs and manufactures oil and gas processing systems at its facility located
in New Iberia, Louisiana for sale world wide. Completion of the transaction is
subject to various conditions, including the satisfactory completion of due
diligence by the Company. No assurance is given that the acquisition will be
successfully completed.
Management believes that its available funds, cash generated by operating
activities and funds available under the Credit Facility will be sufficient to
fund these acquisition, capital expenditures and its working capital needs;
however, any expansion of the Company's operations through future acquisitions
may require additional equity or debt financing.
17
21
IMPACT OF THE YEAR 2000
The Company has assessed and continues to assess the impact of the year
2000 on its reporting systems and operations. The year 2000 issue is the result
of computer programs being written using two digits rather than four to define
the applicable year. Any of the Company's computer programs that have
date-sensitive software may recognize a date using "00" as the year 1900 rather
than 2000. This could potentially result in a system failure or miscalculations
causing disruptions of operations, including, among other things, a temporary
inability to process transactions, send invoices, or engage in other similar
normal business operations. Although the Company is still assessing the impact
of the year 2000 issue on its information technology systems, at this time the
Company believes the impact will not be material to the Company's financial
position or results of operations.
The Company has not yet communicated with all of its significant customers,
suppliers and vendors to ensure that they have appropriate plans to address
year 2000 issues where they may otherwise impact the operations of the Company.
However, the Company does not have any significant customers, suppliers or
vendors that directly interface with the Company's information technology
systems. There is no guarantee that the systems of other companies on which the
Company relies will be converted timely and will not have an adverse effect on
the Company.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK
Not applicable.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
In this report, the consolidated financial statements and supplementary
data of the Company appear on pages F-1 through F-16 and are incorporated
herein by reference. See Index to Consolidated Financial Statements on page 19.
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND
FINANCIAL DISCLOSURE
Not applicable.
PART III
ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
Information concerning the Company's directors and executive officers
called for by Item 10. will be included in the Company's definitive Proxy
Statement prepared in connection with the 1998 Annual Meeting of Shareholders
and is incorporated herein by reference. For additional information regarding
executive officers of the Company, see "Executive Officers of the Registrant"
in Part I of this report.
ITEM 11. EXECUTIVE COMPENSATION
Information concerning the compensation of the Company's executives called
for by Item 11. will be included in the Company's definitive Proxy Statement
prepared in connection with the 1998 Annual Meeting of Shareholders and is
incorporated herein by reference.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT
Information concerning security ownership of certain beneficial owners and
management called for by Item 12. will be included in the Company's definitive
Proxy Statement prepared in connection with the 1998 Annual Meeting of
Shareholders and is incorporated herein by reference.
18
22
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
Information concerning the certain relationships and related transactions
called for by Item 13. will be included in the Company's definitive Proxy
Statement prepared in connection with the 1998 Annual Meeting of Shareholders
and is incorporated herein by reference.
PART IV
ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON FORM 8-K.
(a) The following financial statements, financial statement schedules and
exhibits are filed as part of this report:
(i) Financial Statements
PAGE
----
Report of Independent Auditors F-1
Consolidated Balance Sheets F-2
Consolidated Statements of Income for the Years Ended March 31,
1996, 1997 and 1998 F-3
Consolidated Statements of Shareholders' Equity for the Years Ended
March 31, 1996, 1997 and 1998 F-4
Consolidated Statements of Cash Flows for the Years Ended March 31,
1996, 1997, and 1998 F-5
Notes to Consolidated Financial Statements F-6
(ii) Financial Statement Schedules
Other schedules have not been included because they are not required,
not applicable, immaterial or the information required has been included
elsewhere.
(iii) Exhibits
See Index on page E-1. The Company will furnish to any eligible
stockholder, upon written request, a copy of any exhibit listed upon payment of
a reasonable fee equal to the Company's expenses in furnishing such exhibit.
Such requests should be addressed to Mr. Peter Roman, UNIFAB International,
Inc., P.O. Box 11308, New Iberia, LA 70562.
(b) Reports on Form 8-K.
The Company filed a current report on Form 8-K under Items 2. and 7.
dated as of February 5, 1998. Pursuant to Item 7., the Company included pro
forma statements of operations for the year ended March, 31, 1997 and for the
nine-month period ended December 31, 1997 and a pro forma balance sheet as of
December 31, 1997.
19
23
GLOSSARY OF CERTAIN TECHNICAL TERMS
COMMISSIONING: Functional testing of equipment and systems without the
introduction of hydrocarbons.
DECK: The component of a platform on which development
drilling, production, separating, gathering, piping,
compression, well support, crew quartering and other
functions related to offshore oil and gas development
are conducted.
DIRECT LABOR HOURS: Direct labor hours are hours worked by employees
directly involved in the production of the Company's
products. These hours do not include contractor labor
hours and support personnel hours such as maintenance,
warehousing and drafting.
FIXED PLATFORM: A platform consisting of a rigid jacket which rests on
tubular steel pilings driven into the seabed and which
supports a deck structure above the water surface.
FLOATING PRODUCTION Floating structure (e.g., ship or semisubmersible
FACILITY: vessel) upon which drilling and production equipment
is mounted.
GRIT BLAST SYSTEM: System of preparing steel for coating by using steel
grit rather than sand as a blasting medium.
JACKET: A component of a fixed platform consisting of a tubular
steel, braced structure extending from the mudline of
the seabed to a point above the water surface. The
jacket is supported on tubular steel pilings driven
into the seabed.
MODULES: Packaged equipment usually consisting of major
production, utility or compression equipment with
associated piping and control system.
OFFSHORE: In unprotected waters outside coastlines.
PILES: Rigid tubular pipes that are driven into the seabed to
support platforms.
PLATFORM: A structure from which offshore oil and gas drilling
and production are conducted.
PLATFORM DRILLING RIG: A drilling rig designed to be mounted atop a fixed
platform.
POSTED DRILLING RIG: A drilling rig mounted on steel columns fixed to a
barge that is sunk upon reaching a desired drilling
location.
SPAR PLATFORM: Vertically floating, large-diameter cylindrical
platform supporting a relatively conventional offshore
drilling and production deck and positioned on site
with lateral mooring systems connected to piling or
anchors.
SUBSEA TEMPLATES: Tubular frames which are placed on the seabed and
anchored with piles. Usually a series of oil and gas
wells are drilled through these underwater structures.
TENSION-LEG PLATFORM A platform consisting of a deck situated atop four or
(TLP): more separated column-shaped semi-submersible hulls,
which are positioned on-site by vertical tendons
(pipes) that run from the columns to the sea floor.
G-1
24
Report of Independent Auditors
The Board of Directors and Shareholders
UNIFAB International, Inc.
We have audited the accompanying consolidated balance sheets of UNIFAB
International, Inc. as of March 31, 1997 and 1998 and the related consolidated
statements of income, shareholders' equity and cash flows for each of the three
years in the period ended March 31, 1998. These financial statements are the
responsibility of the Company's management. Our responsibility is to express an
opinion on these financial statements based on our audits.
We conducted our audits in accordance with generally accepted auditing
standards. Those standards require that we plan and perform the audit to obtain
reasonable assurance about whether the financial statements are free of
material misstatement. An audit includes examining, on a test basis, evidence
supporting the amounts and disclosures in the financial statements. An audit
also includes assessing the accounting principles used and significant
estimates made by management, as well as evaluating the overall financial
statement presentation. We believe that our audits provide a reasonable basis
for our opinion.
In our opinion, the financial statements referred to above present fairly, in
all material respects, the consolidated financial position of UNIFAB
International, Inc. at March 31, 1997 and 1998, and the consolidated results of
its operations and its cash flows for each of the three years in the period
ended March 31, 1998 in conformity with generally accepted accounting
principles.
Ernst & Young LLP
New Orleans, Louisiana
April 28, 1998
F-1
25
UNIFAB International, Inc.
Consolidated Balance Sheets
MARCH 31
1997 1998
---------------- -------------
ASSETS
Current assets:
Cash and cash equivalents $ 659,626 $ 8,379,131
Accounts receivable 19,368,473 16,396,255
Costs and estimated earnings in excess of billings on uncompleted
contracts 239,097 292,284
Prepaid expenses 444,045 770,611
Other assets 102,062 237,426
---------------- -------------
Total current assets 20,813,303 26,075,707
Property, plant and equipment, net 5,341,122 10,802,324
Cost in excess of net assets acquired, net of accumulated amortization
of $144,128 - 6,774,019
Other assets - 757,884
---------------- -------------
Total assets $ 26,154,425 $ 44,409,934
================ =============
LIABILITIES AND SHAREHOLDERS' EQUITY
Current liabilities:
Bank overdraft $ 763,010 $ -
Accounts payable 6,210,166 4,934,939
Billings in excess of costs and estimated earnings on uncompleted
contracts 4,317,837 1,192,701
Accrued liabilities 480,311 874,421
Payroll and related liabilities 333,451 1,761,780
Income tax payable 516,462 754,971
Notes payable - 154,005
---------------- -------------
Total current liabilities 12,621,237 9,672,817
Deferred income taxes 1,332,168 991,725
Other noncurrent liabilities - 723,353
Shareholders' equity:
Preferred stock, no par value, 5,000,000 shares authorized, no
shares outstanding - -
Common stock, $0.01 par value, 20,000,000 shares authorized,
5,048,655 and 3,500,000 shares outstanding, respectively 35,000 50,487
Additional paid-in capital 6,483,664 25,532,678
Retained earnings 5,682,356 7,438,874
---------------- -------------
Total shareholders' equity 12,201,020 33,022,039
---------------- -------------
Total liabilities and shareholders' equity $ 26,154,425 $ 44,409,934
================ =============
See accompanying notes.
F-2
26
UNIFAB International, Inc.
Consolidated Statements of Income
YEARS ENDED MARCH 31
1996 1997 1998
---------------- ---------------- --------------
Revenue $ 51,807,144 $ 66,724,504 $ 68,563,987
Cost of revenue 40,361,724 58,589,197 57,789,474
---------------- ---------------- --------------
Gross profit 11,445,420 8,135,307 10,774,513
General and administrative expense 1,419,668 1,637,563 2,967,282
---------------- ---------------- --------------
Income from operations 10,025,752 6,497,744 7,807,231
Other income (expense):
Interest expense (3,092) (63,304) (53,830)
Interest income 318,185 145,155 521,534
---------------- ---------------- --------------
Income before income taxes 10,340,845 6,579,595 8,274,935
Income tax provision 3,888,158 2,554,941 2,896,228
---------------- ---------------- --------------
Net income $ 6,452,687 $ 4,024,654 $ 5,378,707
================ ================ ==============
Basic earnings per share $ 1.84 $ 1.15 $ 1.25
================ ================ ==============
Basic earnings per share weighted average shares 3,500,000 3,500,000 4,292,212
================ ================ ==============
Diluted earnings per share $ 1.84 $ 1.15 $ 1.25
================ ================ ==============
Diluted earnings per share weighted average shares 3,500,000 3,500,000 4,313,054
================ ================ ==============
F-3
See accompanying notes.
27
UNIFAB International, Inc.
Consolidated Statements of Shareholders' Equity
COMMON STOCK ADDITIONAL
------------------------ PAID-IN RETAINED
SHARES AMOUNT CAPITAL EARNINGS TOTAL
--------- ------- ---------------- ---------------- -----------------
Balance at April 1, 1995 3,500,000 $35,000 $ 6,483,664 $ 2,933,801 $ 9,452,465
Dividends paid - - - (1,921,368) (1,921,368)
Net income - - - 6,452,687 6,452,687
--------- ------- ---------------- ---------------- -----------------
Balance at March 31, 1996 3,500,000 35,000 6,483,664 7,465,120 13,983,784
Dividends paid - - - (5,807,418) (5,807,418)
Net income - - - 4,024,654 4,024,654
--------- ------- ---------------- ---------------- -----------------
Balance at March 31, 1997 3,500,000 35,000 6,483,664 5,682,356 12,201,020
Initial public offering of common
stock 1,522,250 15,223 24,849,278 - 24,864,501
Payment for surrender of
shareholder rights - - (6,300,000) - (6,300,000)
Dividends paid - - - (3,622,189) (3,622,189)
Acquisition of PIM 26,405 264 499,736 - 500,000
Net income - - - 5,378,707 5,378,707
--------- ------- ---------------- ---------------- -----------------
Balance at March 31, 1998 5,048,655 $50,487 $ 25,532,678 $ 7,438,874 $ 33,022,039
========= ======= ================ ================ =================
See accompanying notes.
F-4
28
UNIFAB International Inc.
Consolidated Statements of Cash Flows
YEAR ENDED MARCH 31
1996 1997 1998
---------------- ------------- --------------
CASH FLOWS FROM OPERATING ACTIVITIES
Net income $ 6,452,687 $ 4,024,654 $ 5,378,707
Adjustments to reconcile net income to net cash provided by operating
activities:
Depreciation 389,711 471,305 590,540
Amortization - - 144,128
(Gain) loss from sale of equipment (8,000) (10,125) -
Deferred income taxes (72,919) (20,208) (368,731)
Changes in operating assets and liabilities, net of effects from
acquisition of business:
Accounts receivable (2,871,872) (9,398,965) 6,001,421
Net costs and estimated earnings in excess of billings and
billings in excess of costs and estimated earnings on
uncompleted contracts (2,530,466) 4,061,441 (3,108,157)
Prepaid expenses and other assets 658,534 (95,435) (885,541)
Bank overdraft 715,576 47,434 (763,010)
Accounts payable and accrued liabilities 792,983 3,489,936 (1,920,887)
Income taxes payable 758,786 (242,324) 241,873
---------------- ------------- --------------
Net cash provided by operating activities 4,285,020 2,327,713 5,310,343
CASH FLOWS FROM INVESTING ACTIVITIES
Acquisition of business, net of cash acquired - - (4,783,841)
Purchases of equipment (402,405) (820,619) (5,008,190)
Proceeds from sale of equipment 8,000 17,175 -
---------------- ------------- --------------
Net cash used in investing activities (394,405) (803,444) (9,792,031)
CASH FLOWS FROM FINANCING ACTIVITIES
Proceeds from initial public offering of stock - - 24,864,501
Payment for surrender of shareholder rights - - (6,300,000)
Dividends paid (1,921,368) (5,807,418) (3,622,189)
Net change in borrowings - - (2,741,119)
---------------- ------------- --------------
Net cash provided by (used in) financing activities (1,921,368) (5,807,418) 12,201,193
---------------- ------------- --------------
Net change in cash and cash equivalents 1,969,247 (4,283,149) 7,719,505
Cash and cash equivalents at beginning of year 2,973,528 4,942,775 659,626
---------------- ------------- --------------
Cash and cash equivalents at end of year $ 4,942,775 $ 659,626 $ 8,379,131
================ ============= ==============
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION
Cash paid during the year for:
Income taxes $ 3,173,014 $ 2,817,473 $ 2,917,583
================ ============= ==============
See accompanying notes.
F-5
29
UNIFAB International, Inc.
Notes to Consolidated Financial Statements
March 31, 1998
1. DESCRIPTION OF BUSINESS AND SIGNIFICANT ACCOUNTING POLICIES
ORGANIZATION AND INITIAL PUBLIC OFFERING
UNIFAB International, Inc. (the "Company") was formed on July 16, 1997 to
serve as the parent corporation of Universal Fabricators Incorporated, 51% of
the outstanding common stock of which was owned by Universal Partners, Inc.
(Universal Partners) and 49% of which was owned by McDermott Incorporated
(McDermott). On September 24, 1997 immediately prior to the completion of an
initial public offering of 3,237,250 shares of the Company's $.01 par value
common stock (the Offering), Universal Partners and McDermott exchanged their
respective shares of common stock of Universal Fabricators Incorporated for
shares of the Company's common stock. The shareholders of Universal Partners
received 1,785,000 shares of common stock of the Company and McDermott received
1,715,000 shares of common stock of the Company in this share exchange. All
share related amounts have been adjusted to reflect the effect of this
exchange. In the Offering, 1,522,250 shares were sold by the Company and the
balance of the shares were sold by McDermott.
Also on September 24, 1997, Universal Fabricators Incorporated paid
$6,300,000 to McDermott for the surrender of certain contractual rights,
including the cancellation of an option held by McDermott which allowed it to
acquire the other 51% of outstanding common stock of Universal Fabricators
Incorporated.
DESCRIPTION OF BUSINESS
The Company fabricates and assembles jackets, decks, topside facilities,
quarters buildings, drilling rigs and equipment for installation and use
offshore in the production, processing and storage of oil and gas. The
Company's main fabrication yard is located in the Port of Iberia at New Iberia,
Louisiana. Through a wholly owned subsidiary, PIM, LLC, the Company provides
industrial maintenance services and repair, refurbishment and conversion
services for oil and gas drilling rigs.
The operating cycle of the Company's contracts is typically less than one
year, although some large contracts may exceed one year's duration. Assets and
liabilities have been classified as current and noncurrent under the operating
cycle concept, whereby all contract-related items are regarded as current
regardless of whether cash will be received within a 12-month period. At March
31, 1998, it was anticipated that substantially all contracts in progress, and
receivables associated therewith, would be completed and collected within a
12-month period.
PRINCIPLES OF CONSOLIDATION
The consolidated financial statements include the accounts of the Company
and its subsidiaries, all of which are wholly owned. Significant intercompany
accounts and transactions have been eliminated in consolidation.
USE OF ESTIMATES
The preparation of financial statements in conformity with generally
accepted accounting principles requires management to make estimates and
assumptions that affect the amounts reported in the financial statements and
accompanying notes. Actual results could differ from those estimates.
F-6
30
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
1. DESCRIPTION OF BUSINESS AND SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)
CONCENTRATION OF CREDIT RISK
The Company's customers are principally major and large independent oil and
gas companies. The Company's management believes that the portfolio of
receivables is diversified and that such diversification minimizes any
potential credit risk. Receivables are generally not collateralized. Credit
losses have been insignificant.
REVENUE AND COST RECOGNITION
Revenue from fixed-price and modified fixed-price contracts are recognized
on the percentage-of-completion method, measured by the ratio which labor and
subcontract costs incurred to date bear to total estimated labor and
subcontract costs. In the case of long-term contracts extending over one or
more fiscal years, revisions of the cost and profit estimated during the course
of the work are reflected in the accounting period in which the facts that
require revision become known. At the time a loss on a contract becomes known,
the entire amount of the ultimate loss is accrued. Variations from estimated
contract performance could result in a material adjustment to operating results
for any fiscal year. Contract bonus payments under fixed price contracts are
included in revenue when their realization is reasonably assured. Revenue from
cost-plus-fee contracts is recognized on the basis of costs incurred during the
period plus the fee earned.
Contract costs include direct labor, material, subcontract costs and
allocated indirect costs related to contract performance. General and
administrative costs are charged to expense as incurred.
PROPERTY, PLANT AND EQUIPMENT
Property, plant and equipment is stated at cost. Depreciation is computed
principally by the straight-line and declining-balance methods over the
estimated lives of the assets, which range from 19 to 31 years for building and
bulkhead and 3 to 12 years for yard and other equipment for financial statement
purposes and by accelerated methods for income tax purposes.
CASH EQUIVALENTS
The Company considers all highly liquid investments with a maturity of
three months or less when purchased to be cash equivalents.
COST IN EXCESS OF NET ASSETS ACQUIRED
Cost in excess of net assets acquired is amortized on a straight line basis
over 12 years for financial statement purposes and over 15 years for income tax
purposes. Management periodically reviews cost in excess of net assets acquired
to assess recoverability and impairment would be recognized in operating
results if a permanent diminution in value were to occur.
F-7
31
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
1. DESCRIPTION OF BUSINESS AND SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)
INCOME TAXES
Income taxes have been provided using the liability method in accordance
with Statement of Financial Accounting Standards No. 109, Accounting for Income
Taxes.
FAIR VALUE OF FINANCIAL INSTRUMENTS
The carrying amount of the Company's financial instruments at March 31,
1998, including cash and cash equivalents and accounts receivable, closely
approximates fair value.
STOCK BASED COMPENSATION
The Company grants stock options for a fixed number of shares to employees
with an exercise price equal to the fair value of the shares at the date of the
grant. The Company accounts for the stock option grants in accordance with APB
Opinion No. 25, Accounting for Stock Issued to Employees, and, accordingly,
recognized no compensation expense for the stock option grants.
RECLASSIFICATIONS
Certain amounts previously reported have been reclassified to conform with
the presentation at March 31, 1998.
2. MERGERS AND ACQUISITIONS
On February 5, 1998, the Company completed its acquisition of the assets
and business of Professional Industrial Maintenance, LLC ("PIM") for $6.0
million ($4.8 million in cash and $500,000 in shares of the Company's common
stock at closing (26,405 shares) and $337,500 per year for two years payable in
shares of the Company's common stock). In conjunction with the acquisition, the
Company acquired assets with a fair value of $4.5 million and assumed
liabilities of $5.4 million. The allocation of purchase price of the PIM
acquisition was based on the information available and is tentative pending
completion of that information. The transaction was accounted for as a purchase
and the excess cost over estimated fair value of the net assets acquired is
being amortized over 12 years on a straight-line basis. The acquisition was
effective as of January 1, 1998, and the operating results of the acquired
assets are included in the consolidated statement of income from that date.
The pro forma unaudited results of operations for the years ended March 31,
1997 and 1998, assuming the purchase of the assets and business of PIM had been
consummated April 1, 1996, are as follows (in thousands, except per share
data):
1997 1998
---------------------
Revenues $ 75,552 $ 83,191
Net income 2,634 4,816
Basic and diluted earnings per share 0.75 1.12
F-8
32
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
3. CONTRACTS IN PROGRESS
Information pertaining to contracts in progress at March 31 follows:
1997 1998
---------------- ----------------
Costs incurred on uncompleted contracts $ 37,077,023 $ 9,682,446
Estimated earnings 4,488,532 1,834,614
---------------- ----------------
41,565,555 11,517,060
Less billings to date (45,644,295) (12,417,477)
---------------- ----------------
$ (4,078,740) $ (900,417)
================ ================
Included in the accompanying balance sheets under
the following captions:
Costs and estimated earnings in excess of
billings on uncompleted contracts $ 239,097 $ 292,284
Billings in excess of costs and estimated
earnings on uncompleted contracts (4,317,837) (1,192,701)
---------------- ----------------
$ (4,078,740) $ (900,417)
================ ================
Accounts receivable includes retainages and unbilled receivables,
respectively, of $10,000 and $478,000 at March 31, 1997 and $598,000 and
$1,901,000 at March 31, 1998.
4. PROPERTY, PLANT AND EQUIPMENT
Property, plant and equipment consisted of the following at March 31, 1997
and 1998:
1997 1998
---------------- ----------------
Land $ 756,000 $ 1,048,970
Building and bulkhead, including leasehold
improvements 3,780,243 4,581,315
Yard equipment 3,319,830 4,799,793
Vehicles and other equipment 505,545 1,097,013
Construction in progress - 2,886,269
---------------- ----------------
8,361,618 14,413,360
Less accumulated depreciation 3,020,496 3,611,036
---------------- ----------------
$ 5,341,122 $ 10,802,324
================ ================
F-9
33
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
4. PROPERTY, PLANT AND EQUIPMENT (CONTINUED)
The Company leases land upon which a portion of its facilities in New
Iberia are located under noncancelable operating leases. The leases expire in
fiscal year 2004 and have two ten-year renewal options. The Company also leases
its facility in Lake Charles under a noncancelable operating lease. The lease
expires in fiscal year 2000 and has two five-year renewal options. Future
minimum payments under these leases are as follows:
1999 $ 319,000
2000 283,000
2001 175,000
2002 153,000
2003 123,000
2004 and after 72,000
-----------------
$ 1,125,000
=================
Rent expense during the years ended March 31, 1996, 1997 and 1998 was
$921,000, $1,456,000 and $2,238,000, respectively, which includes rent on
cancelable equipment leases.
5. INCOME TAXES
Deferred income taxes reflect the net effects of temporary differences
between the carrying amounts of assets and liabilities for financial reporting
purposes and the amounts used for income tax purposes. Significant components
of the Company's deferred tax liabilities and assets as of March 31 were as
follows:
1997 1998
----------- ------------
Deferred tax liabilities - excess of financial
statement basis over income tax basis of property,
plant and equipment $ 1,332,168 $ 991,725
Deferred tax assets - primarily excess of income tax
basis over financial statement basis of contracts 33,462 61,750
----------- ------------
Net deferred tax liabilities $ 1,298,706 $ 929,975
=========== ============
The income tax provision is comprised of the following:
1996 1997 1998
---------------- ------------- -------------
Current $ 3,961,077 $ 2,575,149 $ 3,264,959
Deferred (72,919) (20,208) (368,731)
---------------- ------------- -------------
$ 3,888,158 $ 2,554,941 $ 2,896,228
================ ============= =============
F-10
34
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
5. INCOME TAXES (CONTINUED)
The reconciliation of income tax computed at the federal statutory rates to
income tax expense is:
1996 1997 1998
---------------- ------------- -------------
Tax at federal statutory rates $ 3,519,296 $ 2,237,062 $ 2,813,478
Other, primarily state income taxes 368,862 317,879 82,750
---------------- ------------- -------------
$ 3,888,158 $ 2,554,941 $ 2,896,228
================ ============= =============
6. CREDIT ARRANGEMENT
On September 22, 1997, the Company entered into an unsecured credit
facility (the "Credit Facility") with a commercial lender, which provides for
up to $10.0 million in borrowings for general corporate purposes and for
letters of credit up to $10.0 million under a revolving credit facility.
Borrowings under the revolving credit facility bear interest at the prime
lending rate established by Chase Manhattan Bank, N.A. or LIBOR plus 2.0%, at
the Company's option. The fee for issued letters of credit is 7/8 of 1% per
annum on the principal amount of the letter of credit. The unused commitment
fee is 3/8 of 1% per annum. The revolving credit facility matures August 31,
2000. At March 31, 1998, the Company had no letters of credit and no borrowings
outstanding under the revolving credit facility. The Credit Facility also
provides for replacement of several letters of credit under a nonrevolving
letter of credit facility. These letters of credit, which aggregate $4.8
million, were previously provided by McDermott (the "McDermott Letters of
Credit"). The nonrevolving letter of credit facility will be reduced upon the
respective expiration dates of the letters of credit issued to replace the
McDermott Letters of Credit, the last of which is scheduled to expire in
January 2000.
7. EARNINGS PER SHARE
In 1997, the Financial Accounting Standards Board issued Statement No. 128,
Earnings Per Share. Statement No. 128 replaced APB Opinion No. 15 for the
calculation of primary and fully diluted earnings per share with basic and
diluted earnings per share. Unlike primary earnings per share, basic earnings
per share exclude any diluted effects of options, warrants and convertible
securities. Diluted earnings per share is very similar to the previously
reported fully diluted earnings per share. All earnings per share amounts for
all periods have been presented, and where appropriate, restated to conform to
the Statement No. 128 requirements.
F-11
35
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
7. EARNINGS PER SHARE (CONTINUED)
The following table sets forth the computation of basic and diluted
earnings per share (in thousands, except per share date):
1996 1997 1998
----------- ---------- ----------
Numerator for basic and diluted earnings per
share $ 6,453 $ 4,025 $ 5,379
=========== ========== ==========
Denominator:
Denominator for basic earnings per share -
weighted average shares 3,500 3,500 4,292
Effect of dilutive employee stock options - - 21
----------- ---------- ----------
Denominator for diluted earnings per share -
adjusted weighted average shares 3,500 3,500 4,313
=========== ========== ==========
Basic earnings per share $ 1.84 $ 1.15 $ 1.25
Diluted earnings per share $ 1.84 $ 1.15 $ 1.25
8. DIVIDENDS
Under the provisions of a shareholders' agreement, unless otherwise
approved by the board of directors, the Company distributed 90% of its net
income for the prior fiscal year. The shareholders' agreement was terminated
upon completion of the Offering.
9. RELATED PARTY TRANSACTIONS
In September 1997, the Company acquired approximately 18 acres of land and
an administrative office building formerly leased by the Company from McDermott
for $700,000 and paid $6,300,000 to McDermott for the surrender of certain
contractual rights, including the cancellation of an option held by McDermott
that allowed McDermott to acquire the other 51% of outstanding common stock of
Universal Fabricators Incorporated. The Company also acquired 10 acres of land
adjacent to its facilities from Universal Partners for $100,500. Additionally,
the Company performed subcontract work for McDermott or companies affiliated
with McDermott in the amount of $563,000, $16,810,000 and $4,000 in fiscal
years 1996, 1997 and 1998, respectively. Included in accounts receivable is
$2,104,653 and $0 from McDermott or companies affiliated with McDermott at
March 31, 1997 and 1998, respectively.
10. LONG-TERM INCENTIVE PLAN
The Company has elected to follow Accounting Principles Board Opinion No.
25, Accounting for Stock Issued to Employees (APB 25), and related
interpretations in accounting for its employee stock options because, as
discussed below, the alternative fair value accounting provided under FASB
Statement No. 123, Accounting for Stock-Based Compensation (Statement No. 123),
requires use of option valuation models that were not developed for use in
valuing employee stock options. Under APB 25, no compensation expense is
recognized because the exercise price of the Company's employee stock options
equals the market price of the underlying stock on the date of grant.
F-12
36
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
10. LONG-TERM INCENTIVE PLAN (CONTINUED)
In July 1997, the Company adopted and its shareholders approved the
Long-Term Incentive Plan (the "1997 Plan") to provide long-term incentives to
its key employees, including officers and directors who are employees of the
Company (the "Eligible Employees"). Under the 1997 Plan, which is administered
by the Compensation Committee of the Board of Directors, the Company may grant
incentive stock options, nonqualified stock options, restricted stock, other
stock-based awards or any combination thereof (the "Incentives") to Eligible
Employees. The Compensation Committee will determine who will receive
Incentives and will establish the exercise price of any stock options granted
under the Incentive Plan, provided that the exercise price may not be less than
the fair market value of the Common Stock on the date of grant. A maximum total
of 460,000 shares of Common Stock are available for issuance under the 1997
Plan.
As of March 31, 1998, options to purchase 133,500 shares of Common Stock
have been granted under the 1997 Plan to directors and key employees of the
Company. All of the options granted under the 1997 Plan have a 10-year term and
vest over a 2-year period. The optionee will not realize any income for federal
income tax purposes, nor will the Company be entitled to any deduction, upon
the grant of a nonqualified stock option. Upon exercise, the optionee will
realize ordinary income measured by the difference between the aggregate fair
market value of the shares of Common Stock on the exercise date and the
aggregate exercise price, and the Company will be entitled to a deduction in
the same amount.
Pro forma information regarding net income and earnings per share is
required by Statement No. 123 and has been determined as if the Company had
accounted for its employee stock options under the fair value method of that
statement. The fair value for these options was estimated at the date of the
grant using the Black-Scholes option pricing model with the following weighted
average assumptions for fiscal 1998: a risk-free interest rate of 5.75%;
dividend yield of zero; volatility factor of the expected market price of the
Company's common stock of .737; and a weighted average expected life of the
options of 2 years.
The Black-Scholes valuation model was developed for use in estimating the
fair value of trade options, which have no vesting restrictions and are fully
transferable. In addition, option valuation models require the input of
subjective assumptions including the expected stock price volatility. Because
the Company's employee stock options have characteristics significantly
different from those of traded options, and because changes in the subjective
input assumptions can materially affect the fair value estimated, in
management's opinion the existing models do not necessarily provide a reliable
single measure of the fair value of its employee stock options.
F-13
37
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
10. LONG-TERM INCENTIVE PLAN (CONTINUED)
For purposes of pro forma disclosures, the estimated fair value of the
options is amortized to expense over the options' vesting period. Since the
options vest over a two-year period, the pro forma disclosures are not
indicative of future amounts until Statement 123 is applied to all outstanding
nonvested options. The Company's pro forma information for fiscal year 1998 is
as follows (in thousands, except for per share data):
Net income:
As reported $ 5,379
Pro forma including the effect of options $ 4,986
Basic earnings per share:
As reported $ 1.25
Pro forma including the effect of options $ 1.16
Diluted earnings per share:
As reported $ 1.25
Pro forma including the effect of options $ 1.16
A summary of the Company's stock options activity and the related
information for the year ended March 31, 1998 is as follows (in thousands,
except for per share data):
WEIGHTED AVERAGE
OPTIONS EXERCISE PRICE
------- --------------
Outstanding - beginning of year - -
Granted 134 $18.00
Exercised - -
Expired - -
Forfeited - -
----- --------
Options outstanding at end of year 134 $ 18.00
===== ========
Options exercisable at end of year 46 $ 18.00
===== ========
Weighted-average fair value of options granted
during year
$7.77
=====
11. EMPLOYEE BENEFIT PLAN
Effective April 1, 1996, the Company began sponsoring an employees'
incentive savings plan that allows participants to make contributions by salary
reduction pursuant to Section 401(k) of the Internal Revenue Code. Under this
plan, employees with one year of service with the Company are eligible to
contribute up to 25% of their compensation into the plan, subject to a
specified maximum.
The Company contributes an amount equal to 50% of employee contributions up
to 3% of their base compensation. Matching contributions made by the Company
were approximately $136,000 and $167,000 in fiscal years 1997 and 1998,
respectively.
F-14
38
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
12. MAJOR CUSTOMERS
The Company is not dependent on any one customer, and the contract revenue
earned from each customer varies from year to year based on the contracts
awarded. Contract revenue earned comprising 10% or more of the Company's total
contract revenue earned are summarized as follows (in thousands):
1996 1997 1998
----------- ----------- -----------
Customer A $ 27,417 $ - $ -
Customer B 5,937 - 16,326
Customer C - 23,066 13,725
Customer D - 17,402 -
13. CONTINGENCIES
The Company is party to legal proceedings arising in the normal course of
business. It is the opinion of management that the outcome of these matters
will not have a material adverse effect on the Company's financial position or
results of operations.
14. QUARTERLY OPERATING RESULTS (UNAUDITED)
A summary of quarterly results of operations for the years ended March 31,
1997 and 1998 were as follows (in thousands, except per share data):
JUNE 30, 1996 SEPTEMBER 30, 1996 DECEMBER 31, 1996 MARCH 31, 1997
----------------- ------------------ ----------------- --------------
Revenue $18,419 $18,238 $14,515 $15,553
Gross profit 2,124 2,175 1,707 2,129
Net income 1,099 1,107 838 981
Basic earnings per share 0.31 0.32 0.24 0.28
Diluted earnings per share 0.31 0.32 0.24 0.28
JUNE 30, 1997 SEPTEMBER 30, 1997 DECEMBER 31, 1997 MARCH 31, 1998
------------- ------------------ ----------------- --------------
Revenue $15,503 $17,948 $13,470 $21,643
Gross profit 2,189 2,386 2,413 3,786
Net income 1,144 1,298 1,237 1,700
Basic earnings per share 0.33 0.36 0.25 0.34
Diluted earnings per share 0.33 0.36 0.25 0.34
F-15
39
UNIFAB International, Inc.
Notes to Consolidated Financial Statements (continued)
14. SUBSEQUENT EVENT
On February 5, 1998, the Company announced that it had signed a letter of
intent with the shareholders of Allen Tank, Inc. ("Allen Tank"). The
transaction is expected to be accounted for by the pooling of interests method
of accounting for business combinations and is expected to be tax-free to the
shareholders of the Company and of Allen Tank. Allen Tank designs and
manufactures oil and gas processing systems at its facility located in New
Iberia, Louisiana for sale worldwide. Completion of the transaction is subject
to various conditions, including the satisfactory completion of due diligence
by the Company. No assurance is given that the acquisition will be successfully
completed.
F-16
40
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, the Registrant has duly caused this report to be signed
on its behalf by the undersigned, thereunto duly authorized, on June 26, 1998.
UNIFAB International, Inc.
(Registrant)
By: /s/ Dailey J Berard
---------------------------------------
Dailey J. Berard
President and Chief Executive Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, this
report has been signed below by the following persons on behalf of the
registrant and in the capacities and on the dates indicated.
SIGNATURE TITLE
/s/ Dailey J Berard Chairman of the Board, President and
- --------------------------------------- Chief Executive Officer (Principal
Dailey J. Berard Executive Officer)
/s/ Peter J. Roman Vice President and Chief Financial
- --------------------------------------- Officer (Principal Financial and
Peter J. Roman Accounting Officer)
/s/ Charles E. Broussard Director
- ---------------------------------------
Charles E. Broussard
/s/ Richard E. Roberson, Jr. Director
- ---------------------------------------
Richard E. Roberson, Jr.
/s/ Perry Segura Director
- ---------------------------------------
Perry Segura
/s/ George C. Yax Director
- ---------------------------------------
George C. Yax
S-1
41
UNIFAB INTERNATIONAL, INC.
EXHIBIT INDEX
Sequentially
Exhibit Numbered
Number Page
------ ----
2.1 Transition Agreement among the Company, McDermott, Universal
Partners, Universal Fabricators and Dailey J. Berard. *
2.2 Form of Agreement and Plan of Share Exchange between the Company
and Universal Partners *
2.3 Form of Share Exchange Agreement between the Company and
McDermott *
2.4 Agreement to issue stock in UNIFAB International, Inc. dated as
of February 5, 1998 between UNIFAB International, Inc. and
Professional Industrial Maintenance, LLC. This exhibit includes a
list briefly identifying the contents of all omitted schedules
and exhibits. The Company will furnish a copy of any omitted
schedule or exhibit to the Commission upon request. **
2.5 Amendment No. 1 to Agreement to Issue Stock in UNIFAB
International, Inc. dated as of March 31, 1998 among UNIFAB
International, Inc., Professional Industrial Maintenance, LLC and
Don E. Spano, Jr. **
3.1 Articles of Incorporation of the Company *
3.2 By-laws of the Company *
4.1 See Exhibits 3.1 and 3.2 for provisions of the Company's
Articles of Incorporation and By-laws defining the rights of
holders of Common Stock *
4.2 Specimen Common Stock Certificate *
10.1 Form of Indemnity Agreement by and between the Company and each
of its directors and executive officers *
10.2 First Amended and Restated Credit Agreement between the Company
and Hibernia National Bank, dated as of April 1, 1998.
10.3 The Company's Long-Term Incentive Plan * f
10.4 Form of Stock Option Agreement under the Company's Long-Term
Incentive Plan * f
10.9 Form of Employment Agreement between the Company and Dailey J.
Berard * f
21.1 Subsidiaries of the Company
23.1 Consent of Ernst & Young LLP
27.1 Financial Data Schedule
- ------------
* Incorporated by reference to the Company's Registration Statement
on Form S-1 filed with the Commission of September 18, 1997
(Registration No. 333-31609)
** Incorporated by reference to the Company's Current Report on Form
8-K dated February 5, 1998.
f Management Contract or Compensatory Plan
E-1