Carbo Ceramics (CRRTQ) 10-K 2011 FY Annual report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2011

or

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from             to             

Commission File No. 001-15903

CARBO Ceramics Inc.

(Exact name of registrant as specified in its charter)

DELAWARE	72-1100013
(State or other jurisdiction of incorporation or organization)	(I.R.S. Employer Identification Number)

575 North Dairy Ashford

Suite 300

Houston, Texas 77079

(Address of principal executive offices)

(281) 921-6400

(Registrant’s telephone number)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Name of each exchange on which registered
Common Stock, par value $0.01 per share	New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     Yes  x    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.     Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act:

Large accelerated filer	x	Accelerated filer	¨
Non-accelerated filer	¨  (Do not check if a smaller reporting company)	Smaller reporting company	¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of the Common Stock held by non-affiliates of the Registrant, based upon the closing sale price of the Common Stock on June 30, 2011, as reported on the New York Stock Exchange, was approximately $2,828,273,613. Shares of Common Stock held by each executive officer and director and by each person who owns 10% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of February 22, 2012, the Registrant had 23,084,660 shares of Common Stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement for Registrant’s Annual Meeting of Stockholders to be held May 22, 2012, are incorporated by reference in Part III.

TABLE OF CONTENTS

	PART I
Item 1.	Business	1
Item 1A.	Risk Factors	10
Item 1B.	Unresolved Staff Comments	14
Item 2.	Properties	14
Item 3.	Legal Proceedings	15
Item 4.	Mine Safety Disclosure	16
	PART II
Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	17
Item 6.	Selected Financial Data	19
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	21
Item 7A.	Quantitative and Qualitative Disclosures about Market Risk	28
Item 8.	Financial Statements and Supplementary Data	29
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	29
Item 9A.	Controls and Procedures	29
Item 9B.	Other Information	30
	PART III
Item 10.	Directors, Executive Officers and Corporate Governance	31
Item 11.	Executive Compensation	31
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	31
Item 13.	Certain Relationships and Related Transactions, and Director Independence	31
Item 14.	Principal Accounting Fees and Services	31
	PART IV
Item 15.	Exhibits and Financial Statement Schedules	32
Signatures		33
Management’s Report on Internal Control Over Financial Reporting		F-1
Reports of Independent Registered Public Accounting Firm		F-2
Consolidated Financial Statements		F-4

PART I

Item 1. Business

General

CARBO Ceramics Inc. (the “Company”) is the world’s largest supplier of ceramic proppant and, during 2010, commenced the sale of resin-coated sand in order to broaden its proppant suite of products. The Company is the provider of the industry’s most popular fracture simulation software, and a provider of fracture design and consulting services, and a broad range of technologies for spill prevention, containment and countermeasures and geotechnical monitoring. The Company sells the majority of its products and services to operators of oil and natural gas wells and to oilfield service companies to help increase the production rates and the amount of oil and natural gas ultimately recoverable from these wells. The Company’s products and services are primarily used in the hydraulic fracturing of natural gas and oil wells. The Company was incorporated in 1987 in Delaware. As used herein, “Company”, “we”, “our” and “us” may refer to the Company and/or its consolidated subsidiaries.

Hydraulic fracturing is the most widely used method of increasing production from oil and natural gas wells. The hydraulic fracturing process consists of pumping fluids down a natural gas or oil well at pressures sufficient to create fractures in the hydrocarbon-bearing rock formation. A granular material, called proppant, is suspended and transported in the fluid and fills the fracture, “propping” it open once high-pressure pumping stops. The proppant-filled fracture creates a conductive channel through which the hydrocarbons can flow more freely from the formation to the well and then to the surface.

There are three primary types of proppant that can be utilized in the hydraulic fracturing process: sand, resin-coated sand and ceramic. Sand is the least expensive proppant, resin-coated sand is more expensive and ceramic proppant is typically the most expensive. The higher initial cost of ceramic proppant is justified by the fact that the use of these proppants in certain well conditions results in an increase in the production rate of oil and natural gas, an increase in the total oil or natural gas that can be recovered from the well and, consequently, an increase in cash flow for the operators of the well. The increased production rates are primarily attributable to the higher strength and more uniform size and shape of ceramic proppant versus alternative materials.

The Company primarily manufactures five distinct ceramic proppants. CARBOHSP^® and CARBOPROP^® are high strength proppants designed primarily for use in deep oil and gas wells. CARBOHSP^® has the highest strength of any of the ceramic proppants manufactured by the Company and is used primarily in the fracturing of deep oil and gas wells. CARBOPROP^® is slightly lower in weight and strength than CARBOHSP^® and was developed for use in deep oil and gas wells that do not require the strength of CARBOHSP^®.

CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^® are lightweight ceramic proppants. CARBOLITE^® is used in medium depth oil and gas wells, where the additional strength of ceramic proppant may not be essential, but where higher production rates can be achieved due to the product’s uniform size and spherical shape. CARBOECONOPROP^® was introduced to compete directly with sand-based proppant, and CARBOHYDROPROP^® was introduced in late 2007 to improve performance in “slickwater” fracture treatments.

During 2010, the Company began production of resin-coated ceramic (CARBOBOND^®LITE^®) and resin-coated sand (CARBOBOND^® RCS) proppants. The introduction of CARBOBOND^®LITE^® addresses a niche market in which oil and natural gas wells are subject to the risk of proppant flow-back. In the case of CARBOBOND^® RCS, the Company made the strategic decision to offer a lower cost, lower conductivity alternative proppant, in addition to its ceramic proppant products thereby broadening its proppant suite of products.

During the year ended December 31, 2011, the Company generated approximately 79% of its revenues in the United States and 21% in international markets.

1

The Company also sells fracture simulation software and provides fracture design, engineering and consulting services to oil and natural gas companies worldwide through its wholly-owned subsidiary, StrataGen, Inc. The Company provides a suite of stimulation software solutions to the industry that have marked capabilities for on-site real-time analysis. This has enabled recognition and remediation of potential stimulation problems. This stimulation software is tightly integrated with reservoir simulators, thus allowing for stimulation treatment and production optimization. The Company’s specialized engineering team consults and works with operators around the world to help optimize well placement, fracture treatment design and production stimulation. The broad range of expertise of the Company’s consultants includes: fracture treatment design; completion engineering support; on-site treatment supervision, engineering and quality control; post-treatment evaluation and optimization; reservoir and fracture engineering studies; rock mechanics and software application and training.

Demand for most of the Company’s products and services depends primarily upon the demand for natural gas and oil and on the number of natural gas and oil wells drilled, completed or re-completed worldwide. More specifically, the demand for the Company’s products and services is dependent on the number of oil and natural gas wells that are hydraulically fractured to stimulate production.

The Company also provides a broad range of technologies and products for geotechnical monitoring through its wholly owned subsidiary Applied Geomechanics, Inc. (“AGI”). AGI provides monitoring systems and services for bridges, buildings, tunnels, dams, slopes, embankments, volcanoes, landslides, mines and construction projects around the world. It serves a wide spectrum of customers in markets ranging from auto racing teams to surveyors, experimental physicists, radio astronomers and naval architects.

In October 2009, Falcon Technologies and Services, Inc. (“Falcon Technologies”), a wholly-owned subsidiary of the Company, purchased substantially all of the assets of BBL Falcon Industries, Ltd., a supplier of spill prevention, containment and countermeasure systems for the oil and gas industry. The acquisition broadened the Company’s product and service offerings to its existing client base. Falcon Technologies uses proprietary technology to provide products that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials.

Competition

As the demand for resin-coated and ceramic proppant continues to be amplified by the large resource plays, the Company expects more entrants into the market for its products. One of the Company’s largest worldwide proppant competitors is Saint-Gobain Proppants (“Saint-Gobain”). Saint-Gobain is a division of Compagnie de Saint-Gobain, a large French glass and materials company. Saint-Gobain manufactures a variety of ceramic proppants that it markets in competition with each of the Company’s products. Saint-Gobain’s primary manufacturing facility is located in Fort Smith, Arkansas. Saint-Gobain also manufactures ceramic proppant in China and Venezuela. Mineracao Curimbaba (“Curimbaba”), based in Brazil, is also a large competitor and manufactures ceramic proppants that it markets in competition with some of the Company’s products.

There are two major manufacturers of ceramic proppant in Russia. Borovichi Refractory Plant (“Borovichi”) located in Borovichi, Russia, and FORES Refractory Plant (“FORES”) located in Ekaterinburg, Russia. Although the Company has limited information about Borovichi and FORES, the Company believes that Borovichi primarily manufactures intermediate strength ceramic proppants and markets its products principally within Russia, and that FORES manufactures intermediate strength and lightweight ceramic proppant lines and markets its products both inside and outside of Russia. The Company further believes that these companies have added manufacturing capacity in recent years and now provide a majority of the ceramic proppant used in Russia. The Company is also aware of an increasing number of manufacturers in China. Most of these companies produce intermediate strength ceramic proppants that are marketed both inside and outside of China. Chinese proppant imports into the United States increased in 2011 as domestic demand also increased.

2

Competition for CARBOHSP^® and CARBOPROP^® principally includes ceramic proppant manufactured by Saint-Gobain, Curimbaba and various producers located in China. The Company’s CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^® products compete primarily with ceramic proppant produced by Saint-Gobain and Curimbaba and with sand-based proppant for use in the hydraulic fracturing of medium depth natural gas and oil wells. The leading suppliers of mined sand are Unimin Corp., U.S. Silica Company, Badger Mining Corp., Fairmount Minerals Limited, Inc., and Ogelbay-Norton Company. The leading suppliers of resin-coated sand are Momentive Specialty Chemicals (formerly known as Hexion) and Santrol, a subsidiary of Fairmount Minerals.

The Company believes that the most significant factors that influence a customer’s decision to purchase the Company’s ceramic proppant are (i) price/performance ratio, (ii) on-time delivery performance, (iii) technical support and (iv) proppant availability. The Company believes that its products are competitively priced and that its delivery performance is good. The Company also believes that its superior technical support has enabled it to persuade customers to use ceramic proppant in an increasingly broad range of applications and thus increased the overall market for the Company’s products. Over the past five years, the Company has more than doubled its manufacturing capacity and plans to continue its strategy of adding capacity, as needed, to meet anticipated future increases in sales demand.

The Company continually conducts testing and development activities with respect to alternative raw materials to be used in the Company’s existing and alternative production methods. For information regarding the Company’s research and development expenditures see Note 1 to the “Notes to Consolidated Financial Statements.” The Company is actively involved in the development of alternative products for use as proppant in the hydraulic fracturing process and is aware of others engaged in similar development activities. The Company believes that while there are potential specialty applications for these products, they will not significantly impact the use of ceramic proppants. The Company believes that the “know-how” and trade secrets necessary to efficiently manufacture a product of consistently high quality are difficult barriers to entry to overcome.

Customers and Marketing

The Company’s largest customers are participants in the petroleum pressure pumping industry. Specifically, Halliburton Energy Services, Inc. and Schlumberger Limited each accounted for more than 10% of the Company’s 2011 and 2010 revenues. However, the end users of the Company’s products are the operators of natural gas and oil wells that hire the pressure pumping service companies to hydraulically fracture wells. The Company works both with the pressure pumping service companies and with the operators of natural gas and oil wells to present the technical and economic advantages of using ceramic proppant. The Company generally supplies its customers with products on a just-in-time basis, as specified in individual purchase orders. Continuing sales of product depend on the Company’s direct customers and the well operators being satisfied with product quality, availability and delivery performance. The Company provides its software simulation products and consulting services directly to owners and/or operators of oil and gas wells and service companies.

The Company recognizes the importance of a technical marketing program in demonstrating long-term economic advantages when selling products and services that offer financial benefits over time. The Company has a broad technical sales force to advise end users on the benefits of using ceramic proppant, resin-coated sand and performing fracture simulation and consultation services.

Although the Company’s initial products were originally intended for use in deep wells that require high-strength proppant, the Company believes that there is economic benefit to well operators of using ceramic proppant in shallower wells that do not necessarily require a high-strength proppant. The Company believes that its new product introductions and education-based technical marketing efforts have allowed it to capture sales in recent years and will continue to do so in the future.

The Company provides a variety of technical support services and has developed computer software that models the return on investment achievable by using the Company’s ceramic proppant versus alternatives in the

3

hydraulic fracturing of a natural gas or oil well. In addition to the increased technical marketing effort, the Company from time to time engages in field trials to demonstrate the economic benefits of its products and validate the findings of its computer simulations. Periodically, the Company provides proppant to production companies for field trials, on a discounted basis, in exchange for a production company’s agreement to provide production data for direct comparison of the results of fracturing with ceramic proppant as compared to alternative proppants.

The Company’s international marketing efforts are conducted primarily through its sales offices in Dubai, United Arab Emirates; Aberdeen, Scotland; Beijing, China; and Moscow, Russia, and through commissioned sales agents located in South America and China. The Company’s products and services are used worldwide by U.S. customers operating domestically and abroad, and by foreign customers. Sales outside the United States accounted for 21%, 23% and 24% of the Company’s sales for 2011, 2010 and 2009, respectively. The decrease in the proportion of international sales is primarily attributable to increased demand in the U.S. as well as expanded production capacities in the U.S. The distribution of the Company’s international and domestic revenues is shown below, based upon the region in which the customer used the products and services:

	For the years ended December 31,
	2011		2010		2009
	($ in millions)
Location
United States	$	495.8	$	365.4	$	258.5
International		129.9		107.7		83.4
Total	$	625.7	$	473.1	$	341.9

Production Capacity

The Company believes that constructing adequate capacity ahead of demand while incorporating new technology to reduce manufacturing costs are important competitive strategies to increase its overall share of the market for proppant.

In early 2006, the Company completed construction of a manufacturing facility in Toomsboro, Georgia. A second production line at this facility was completed in the fourth quarter of 2007 and commenced operations in January 2008. During the fourth quarter of 2010, the third production line at this facility commenced operations. During the third quarter of 2011, a fourth production line was completed and commenced operations, bringing the stated annual production capacity at this facility to 1.0 billion pounds per year.

During 2009, the Company idled ceramic proppant production at its New Iberia facility originally constructed in 1978. The facility continues to function as a distribution center and the Company has built a resin-coating plant within the existing manufacturing infrastructure of the facility. The resin-coating plant, which began production in 2010, is utilized to coat both ceramic proppant manufactured at other Company locations and raw frac sand. A second resin-coating production line at the facility was completed during the first quarter of 2012.

4

The following table sets forth the current stated capacity of each of the Company’s existing manufacturing and resin-coating facilities:

Location	Annual Capacity
	(millions of pounds)
Eufaula, Alabama		260
McIntyre, Georgia		275
Toomsboro, Georgia		1,000
Luoyang, China		100
Kopeysk, Russia		100
Total manufacturing capacity		1,735
New Iberia, Louisiana – resin-coating		400	*
Total current capacity		2,135

* Processing activities at the New Iberia facility involve resin-coating of previously manufactured ceramic proppant substrate and raw frac sand.

In 2011, the Company completed the acquisition of real estate and has submitted environmental permit applications to construct a ceramic proppant plant in the Millen, Georgia area. The Company believes this site could support an initial manufacturing capacity of up to 500 million pounds of ceramic proppant annually. Subject to obtaining permits and other approvals in a timely manner, a manufacturing line that represents a portion of this initial capacity could commence production before the end of 2013. Additionally, a 600 million pound per year resin-coating plant is under construction in Marshfield, Wisconsin. Raw sand processing facilities at this location are expected to be completed during the first half of 2012, and resin-coating facilities are expected to be completed near the end of 2012. The construction of additional manufacturing capacity beyond these new facilities will be dependent on the expected future demand for the Company’s products and the ability to obtain necessary environmental permits.

The Company generally supplies its domestic pumping service customers with products on a just-in-time basis and operates without any material backlog.

Long-Lived Assets By Geographic Area

Long-lived assets, consisting of net property, plant and equipment, goodwill, intangibles, and other long-term assets as of December 31 in the United States and other countries are as follows:

	2011		2010		2009
	($ in millions)
Long-lived assets:
United States	$	397.5	$	315.5	$	244.1
International (primarily China and Russia)		40.8		46.4		50.4
Total	$	438.3	$	361.9	$	294.5

Distribution

The Company maintains finished goods inventories at each of its manufacturing facilities and at remote stocking facilities. The North American remote stocking facilities consist of bulk storage silos with truck trailer loading facilities, as well as rail yards for direct transloading from rail car to tank trucks. International remote stocking sites are duty-free warehouses operated by independent owners. North American sites are typically supplied by rail, and international sites are typically supplied by container ship. In total, the Company leases approximately 2,000 rail cars for use in the distribution of its products and has contracted for the delivery of an

5

additional 650 railcars by the end of 2012. The price of the Company’s products sold for delivery in the lower 48 United States and Canada includes just-in-time delivery of proppant to the operator’s well site, which eliminates the need for customers to maintain an inventory of ceramic proppant. The Company expands its distribution network as needed to support production capacity additions at the Company’s manufacturing facilities. During 2011, the Company expanded its distribution network. The expansion, which continues into 2012, includes rail car additions as well as increasing finished goods storage capacity at stocking locations in the key unconventional plays the Company serves.

Raw Materials

Ceramic proppant is made from alumina-bearing ores (commonly referred to as clay, bauxite, bauxitic clay or kaolin, depending on the alumina content) that are readily available on the world market. Bauxite is largely used in the production of aluminum metal, refractory material and abrasives. The main known deposits of alumina-bearing ores in the United States are in Arkansas, Alabama and Georgia; other economically mineable known deposits are located in Australia, Brazil, China, Gabon, Guyana, India, Jamaica, Russia and Surinam.

For the production of CARBOHSP^® and CARBOPROP^® in the United States the Company uses bauxite, and has historically purchased its annual requirements at the seller’s current prices. The Company maintains a multi-year agreement with a domestic supplier for a portion of its annual bauxite requirement and the Company believes that this agreement, its ability to purchase bauxite on the open market and current bauxite inventories will sufficiently provide for its bauxite needs in the United States during 2012.

The Company’s Eufaula, McIntyre and Toomsboro facilities primarily use locally mined kaolin for the production of CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^®. The Company has entered into a bi-lateral contract that requires a supplier to sell to the Company, and the Company to purchase from the supplier, a majority of the Eufaula facility’s annual kaolin requirements through 2013, with options to extend this agreement for an additional six years. The Company has obtained ownership rights in acreage in Wilkinson County, Georgia, which contains in excess of a fifteen year supply of kaolin for its Georgia facilities at current production rates. The Company has entered into a long-term agreement with a third party to mine and transport this material at a fixed price subject to annual adjustment. The agreement requires the Company to utilize the third party to mine and transport a majority of the McIntyre facility’s annual kaolin requirement.

The Company’s production facility in Luoyang, China, uses both kaolin and bauxite for the production of CARBOPROP^® and CARBOLITE^®. Certain of these materials are purchased under a long-term contract that stipulates fixed prices subject to periodic adjustment and provides for minimum purchase requirements.

The Company’s production facility in Kopeysk, Russia currently uses bauxite for the production of CARBOPROP^®. Bauxite is purchased under annual agreements that stipulate fixed prices for up to a specified quantity of material.

The Company continues to explore options for the purchase of high quality raw materials for its resin-coated sand business. In 2011, the Company secured a five-year contract with a supplier and consummated the purchase of two parcels of property containing sand reserves, and continues to evaluate additional sources of sand to supply both the Company’s production lines in Marshfield, Wisconsin, which is currently under construction, and New Iberia, Louisiana.

Ceramic Production Process

Ceramic proppants are made by grinding or dispersing ore to a fine powder, combining the powder into small pellets and firing the pellets in a rotary kiln. The Company uses two different methods to produce ceramic proppant. The Company’s plants in McIntyre, Georgia; Kopeysk, Russia and Luoyang, China use a dry process, which utilizes clay, bauxite, bauxitic clay or kaolin. The raw material is ground, pelletized and screened. The manufacturing process is completed by firing the product in a rotary kiln.

6

The Company’s plants in Eufaula, Alabama and Toomsboro, Georgia, use a wet process, which starts with kaolin that is formed into slurry. The slurry is then pelletized in a dryer and the pellets are then fired in a rotary kiln.

The Company’s rotary kilns are primarily heated by the use of natural gas.

Patent Protection and Intellectual Property

The Company makes ceramic proppant and ceramic media used in foundry and scouring processes (the latter two items comprising a minimal volume of overall sales) by processes and techniques that involve a high degree of proprietary technology, some of which is protected by patents.

The Company owns multiple patents in the United States and various foreign countries that relate to different types of ceramic proppant and production methods used for ceramic proppant and media; however, production of products pursuant to these patents does not currently constitute a material portion of the Company’s output. The Company also owns a U.S. patent that relates to methods for the detection of subterranean fractures.

The Company owns multiple U.S. patent applications (together with a number of counterpart applications pending in foreign jurisdictions). Each of the U.S. patent applications cover ceramic proppant, processes for making ceramic proppant, and detection of subterranean fractures. The applications are in various stages of the patent prosecution process, and patents may not issue on such applications in any jurisdiction for some time, if they issue at all.

The Company believes that its patents have historically been important in enabling the Company to compete in the market to supply proppant to the natural gas and oil industry, although important patents expired in 2006 and 2009. The Company intends to enforce, and has in the past vigorously enforced, its patents. The Company may from time to time in the future be involved in litigation to determine the enforceability, scope and validity of its patent rights. In addition to patent rights, and perhaps more notably, the Company uses a significant amount of trade secrets, or “know-how,” and other proprietary information and technology in the conduct of its business. None of this “know-how” and technology is licensed from third parties.

Falcon Technologies owns two U.S. patents, which expire in 2026 and 2027 and relate to construction of secondary containment areas, and multiple U.S patent applications (together with a number of counterpart applications pending in foreign jurisdictions), each of which relates to tank bases, load bearing products, anchoring systems, and methods of constructing secondary containment areas.

Environmental and Other Governmental Regulations

The Company believes that its operations are in substantial compliance with applicable domestic and foreign federal, state and local environmental and safety laws and regulations. In December 2009, the Company obtained Prevention of Significant Deterioration permits from the State of Georgia Environmental Protection Division (“EPD”) regarding appropriate permitting for emissions of substances from its Toomsboro and McIntyre facilities to accommodate expansion at both facilities.

Existing federal Environmental requirements such as the Clean Air Act and the Clean Water Act, as amended, impose certain restrictions on air and water pollutants from the Company’s operations via permits and regulations. Those pollutants include volatile organic compounds, nitrogen oxides, sulfur dioxide, particulates, storm water and wastewater discharges and other by-products. In addition to meeting environmental requirements for existing operations, the Company must also demonstrate compliance with environmental regulations in order to obtain permits prior to any future expansion. The Environmental Protection Agency

(“EPA”) and state programs require covered facilities to obtain individual permits or have coverage under an

7

EPA general permit issued to groups of facilities. A number of federal and state agencies, including but not limited to, the EPA, the Texas Commission of Environmental Quality, the Louisiana Department of Natural Resources, the Alabama Department of Environmental Management, the Wisconsin Department of Natural Energy, and the EPD, in states in which we do business, have environmental regulations applicable to our operations. Historically we have been able to obtain permits, where necessary, to build new facilities and modify existing facilities that allow us to continue compliant operations and obtaining these permits in a timely manner will continue to be an important factor in the Company’s ability to do so in the future.

Employees

As of December 31, 2011, the Company had 961 employees worldwide. In addition to the services of its employees, the Company employs the services of consultants as required. The Company’s employees are not represented by labor unions. There have been no work stoppages or strikes during the last three years that have resulted in the loss of production or production delays. The Company believes its relations with its employees are satisfactory.

Executive Officers of the Registrant

Gary A. Kolstad (age 53) was elected in June 2006, by the Company’s Board of Directors to serve as President and Chief Executive Officer and a Director of the Company. Mr. Kolstad previously served in a variety of positions over 21 years with Schlumberger, Ltd. Mr. Kolstad became a Vice President of Schlumberger, Ltd. in 2001, where he last held the positions of Vice President, Oilfield Services – U.S. Onshore and Vice President, Global Accounts.

Ernesto Bautista III (age 40) joined the Company as a Vice President and Chief Financial Officer in January 2009. From July 2006 until joining the Company, Mr. Bautista served as Vice President and Chief Financial Officer of W-H Energy Services, Inc., a Houston, Texas based diversified oilfield services company (“W-H Energy”). From July 2000 to July 2006, he served as Vice President and Corporate Controller of W-H Energy. From September 1994 to May 2000, Mr. Bautista served in various positions at Arthur Andersen LLP, most recently as a manager in the assurance practice, specializing in emerging, high growth companies. Mr. Bautista is a certified public accountant in the State of Texas.

Mark L. Edmunds (age 56) has been the Vice President, Operations since April 2002. From 2000 until joining the Company, Mr. Edmunds served as Business Unit Manager and Plant Manager for FMC Corporation. Prior to 2000, Mr. Edmunds served Union Carbide Corporation and The Dow Chemical Company in a variety of management positions, including Director of Operations, Director of Internal Consulting and Manufacturing Operations Manager.

David G. Gallagher (age 53) was appointed Vice President, Marketing and Sales in April 2007. Mr. Gallagher previously held a variety of both domestic and international managerial positions in engineering, marketing and sales, and technology development over a 26 year period with Schlumberger, Ltd., where from 1999 until 2002 he served as the Director of Marketing for U.S. Land and from 2002 until 2007, he served as Director of Marketing for Venezuela, Trinidad and the Caribbean.

R. Sean Elliott (age 37) joined the Company in November 2007 as General Counsel, and was appointed as Corporate Secretary and Chief Compliance Officer in January 2008 and as a Vice President of the Company in May 2011. Previously, Mr. Elliott served as legal counsel to Aviall, Inc. (an international aviation company) from 2004 to 2007, where he last held the positions of Assistant General Counsel and Assistant Secretary. From 1999 until 2004, Mr. Elliott practiced law with Haynes and Boone, LLP, a Dallas, Texas-based law firm.

All officers are elected for one-year terms or until their successors are duly elected. There are no arrangements between any officer and any other person pursuant to which he was selected as an officer. There is no family relationship between any of the named executive officers or between any of them and the Company’s directors.

8

Forward-Looking Information

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements. This Form 10-K, the Company’s Annual Report to Shareholders, any Form 10-Q or any Form 8-K of the Company or any other written or oral statements made by or on behalf of the Company may include forward-looking statements which reflect the Company’s current views with respect to future events and financial performance. The words “believe”, “expect”, “anticipate”, “project”, “estimate”, “forecast”, “plan” or “intend” and similar expressions identify forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, each of which speaks only as of the date the statement was made. The Company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. The Company’s forward-looking statements are based on assumptions that we believe to be reasonable but that may not prove to be accurate. All of the Company’s forward-looking information is subject to risks and uncertainties that could cause actual results to differ materially from the results expected. Although it is not possible to identify all factors, these risks and uncertainties include the risk factors discussed below.

The Company’s results of operations could be adversely affected if its business assumptions do not prove to be accurate or if adverse changes occur in the Company’s business environment, including but not limited to:

• a potential decline in the demand for oil and natural gas;

• potential declines or increased volatility in oil and natural gas prices that would adversely affect our customers, the energy industry or our production costs;

• potential reductions in spending on exploration and development drilling in the oil and natural gas industry that would reduce demand for our products and services;

• an increase in competition in the proppant market;

• logistical and distribution challenges relating to certain resource plays that do not have the type of infrastructure systems that are needed to efficiently support oilfield services activities;

• the development of alternative stimulation techniques, such as extraction of oil or gas without fracturing;

• increased governmental regulation of hydraulic fracturing;

• increased regulation of emissions from our manufacturing facilities;

• the development of alternative proppants for use in hydraulic fracturing;

• general global economic and business conditions;

• an increase in raw materials costs;

• fluctuations in foreign currency exchange rates; and

• the potential expropriation of assets by foreign governments.

The Company’s results of operations could also be adversely affected as a result of worldwide economic, political and military events, including, but not limited to, war, terrorist activity or initiatives by the Organization of the Petroleum Exporting Countries (“OPEC”). For further information, see “Item 1A. Risk Factors.”

Available Information

The Company’s annual reports on Form 10-K, proxy statements, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 (“Exchange Act”) are made available free of charge on the Company’s internet website athttp://www.carboceramics.com as soon as reasonably practicable after such material is filed with, or furnished to, the Securities and Exchange Commission (“SEC”).

9

The public may read and copy any materials that the Company files with the SEC at the SEC’s Public Reference Room at 100 F Street, Room 1580, N.E., Washington, D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, athttp://www.sec.gov.

Item 1A. Risk Factors

You should consider carefully the trends, risks and uncertainties described below and other information in this Form 10-K and subsequent reports filed with the SEC before making any investment decision with respect to our securities. If any of the following trends, risks or uncertainties actually occurs or continues, our business, financial condition or operating results could be materially adversely affected, the trading prices of our securities could decline, and you could lose all or part of your investment.

Our business and financial performance depend on the level of activity in the natural gas and oil industries.

Our operations are materially dependent upon the levels of activity in natural gas and oil exploration, development and production. More specifically, the demand for our products is closely related to the number of natural gas and oil wells completed in geologic formations where ceramic proppants are used in fracture treatments. These activity levels are affected by both short-term and long-term trends in natural gas and oil prices. In recent years, natural gas and oil prices and, therefore, the level of exploration, development and production activity, have experienced significant fluctuations. Worldwide economic, political and military events, including war, terrorist activity, events in the Middle East and initiatives by OPEC, have contributed, and are likely to continue to contribute, to price volatility. Additionally, warmer than normal winters in North America and other weather patterns may adversely impact the short-term demand for natural gas and, therefore, demand for our products and services. Natural gas prices experienced a significant decline during 2011, and some companies have announced their intention to reduce drilling activity for natural gas. A prolonged reduction in natural gas and oil prices would generally depress the level of natural gas and oil exploration, development, production and well completions activity and result in a corresponding decline in the demand for our products. Such a decline could have a material adverse effect on our results of operations and financial condition.

Our business and financial performance could suffer if the levels of hydraulic fracturing decrease or cease as a result of the development of new processes, increased regulation or a decrease in horizontal drilling activity.

Substantially all of our products are proppants used in the completion and re-completion of natural gas and oil wells through the process of hydraulic fracturing. In addition, demand for our proppants is substantially higher in the case of horizontally drilled wells, which allow for multiple hydraulic fractures within the same well bore but are more expensive to develop than vertically drilled wells. A reduction in horizontal drilling or the development of new processes for the completion of natural gas and oil wells leading to a reduction in, or discontinuation of the use of, hydraulic fracturing could cause a decline in demand for our products. Additionally, increased regulation or environmental restrictions on hydraulic fracturing or the materials used in this process could negatively affect our business by increasing the costs of compliance or resulting in operational delays, which could cause operators to abandon the process due to commercial impracticability. Moreover, it is possible that future federal, state or foreign laws or regulations could otherwise limit or ban hydraulic fracturing. Any of these events could have a material adverse effect on our results of operations and financial condition.

We may be adversely affected by decreased demand for our proppant or the development by our competitors of effective alternative proppants.

Ceramic proppant is a premium product capable of withstanding higher pressure and providing more highly conductive fractures than mined sand, which is the most commonly used proppant type. Although we believe that the use of ceramic proppant or resin-coated sand generates higher production rates and more favorable production economics than mined sand, a significant shift in demand from ceramic proppant or resin-coated sand

10

to mined sand could have a material adverse effect on our results of operations and financial condition. The development and use of effective alternative proppant could also cause a decline in demand for our products, and could have a material adverse effect on our results of operations and financial condition.

We rely upon, and receive a significant percentage of our revenues from, a limited number of key customers.

During 2011, our key customers included several of the largest participants in the worldwide petroleum pressure pumping industry. Although the end users of our products are numerous operators of natural gas and oil wells that hire pressure pumping service companies to hydraulically fracture wells, two customers accounted collectively for approximately 48% of our 2011 revenues. We generally supply our domestic pumping service customers with products on a just-in-time basis, with transactions governed by individual purchase orders. Continuing sales of product depend on our direct customers and the end user well operators being satisfied with product quality, availability and delivery performance. Although we believe our relations with our customers and the major well operators are satisfactory, a material decline in the level of sales to any one of our major customers due to unsatisfactory product performance, delivery delays or any other reason could have a material adverse effect on our results of operations and financial condition.

We face underdeveloped transportation systems in key resource plays we serve

As oil and natural gas prices fluctuate, our customers may shift their focus back and forth between different resource plays, some of which can be located in geographic areas of the country, that do not have well-developed transportation and distribution infrastructure systems. Therefore, serving our clients on a just in time basis presents operational challenges that could affect our sales. Failure to find solutions to these logistical challenges could adversely affect our ability to respond quickly to the needs of our customers and could negatively impact our financials.

The operations of our customers are subject to a number of operational risks and interruptions and seasonal variations, including inclement weather.

As hydraulic fracturing jobs have increased in size and intensity, common issues such as weather, equipment delays or changes in the location and types of oil and natural gas plays can result in increased variability in proppant sales volumes. Our business operations and those of our customers involve a high degree of operational risk. Natural disasters, adverse weather conditions, collisions and operator error could cause personal injury or loss of life, severe damage to and destruction of property, equipment and the environment, and suspension of operations. Our customers perform work that is subject to unexpected or arbitrary interruption or termination. The occurrence of any of these events could result in work stoppage, loss of revenue, casualty loss, increased costs and significant liability to third parties. We have not historically considered seasonality to be a significant risk, but with the increase in resource plays in the northern and eastern United States as well as our operations in Marshfield, Wisconsin, our results of operations are exposed to seasonal variations and inclement weather. Operations in these regions involve more seasonal risk in the winter months, and work is hindered during other inclement weather events. The ability of our customers to complete work, as well as our ability to mine sand from cold climate areas, could be affected during the winter months. Our revenue and profitability could decrease during these periods and in other severe weather conditions because work is either prevented or more costly to complete. If a substantial amount of production is interrupted, our cash flow and, in turn, our results of operations could be materially and adversely affected.

We provide environmental warranties on certain of our containment and spill prevention products.

Falcon Technologies’ tank liners, secondary containments and related products and services are designed to contain or avoid spills of hydrocarbons and other materials. If a release of these materials occurs, it could be harmful to the environment. Although we attempt to negotiate appropriate limitations of liability in the applicable terms of sale, some customers have required expanded warranties, indemnifications or other terms that could

11

hold Falcon Technologies responsible in the event of a spill or release under particular circumstances. If Falcon Technologies is held responsible for a spill or release of materials from one of its customer’s facilities, it could have a material adverse effect on our results of operations and financial condition.

Third parties may claim that we are infringing their intellectual property rights.

The Company uses a significant amount of trade secrets, or “know-how,” and other proprietary information and technology in the conduct of its business. Although the Company does not believe that it is infringing upon the intellectual property rights of others by using such proprietary information and technology, it is possible that such a claim will be asserted against the Company in the future. In the event any third party makes a claim against us for infringement of patents or other intellectual property rights of a third party, such claims, with or without merit, could be time-consuming and result in costly litigation. In addition, the Company could experience loss or cancellation of customer orders, experience product shipment delays, or be subject to significant liabilities to third parties. If our products or services were found to infringe on a third party’s proprietary rights, the Company could be required to enter into royalty or licensing agreements to continue selling its products or services. Royalty or licensing agreements, if required, may not be available on acceptable terms, if at all, which could seriously harm our business. Involvement in any patent dispute or other intellectual property dispute or action to protect trade secrets and expertise could have a material adverse effect on the Company’s business.

We operate in an increasingly competitive market.

We compete with other principal suppliers of ceramic proppant, as well as with suppliers of sand and resin-coated sand for use as proppant, in the hydraulic fracturing of natural gas and oil wells. The proppant market is highly competitive and no one supplier is dominant. The expiration of key patents owned by the Company in 2006 and 2009 has resulted in additional competition in the market for ceramic proppant. This entry of additional competitors into the market to supply ceramic proppant could have a material adverse effect on our results of operations and financial condition.

Significant increases in fuel prices for any extended periods of time will increase our operating expenses.

The price and supply of natural gas are unpredictable, and can fluctuate significantly based on international, political and economic circumstances, as well as other events outside of our control, such as changes in supply and demand due to weather conditions, actions by OPEC and other oil and gas producers, regional production patterns and environmental concerns. Natural gas is a significant component of our direct manufacturing costs and price escalations will likely increase our operating expenses and can have a negative impact on income from operations and cash flows. We operate in a competitive marketplace and may not be able to pass through all of the increased costs that could result from an increase in the cost of natural gas.

Environmental compliance costs and liabilities could reduce our earnings and cash available for operations.

We are subject to increasingly stringent laws and regulations relating to environmental protection, including laws and regulations governing air emissions, water discharges and waste management. The technical requirements of complying with these environmental laws and regulations are becoming increasingly expensive and complex, and may affect the Company’s ability to expand its operations. Our ability to continue the expansion of our manufacturing capacity to meet market demand is contingent upon obtaining required environmental permits and compliance with their terms, which continue to be more restrictive and require longer lead times to obtain in anticipation of any efforts to expand and increase capacity. We incur, and expect to continue to incur, capital and operating costs to comply with environmental laws and regulations.

In addition, we use some hazardous substances and generate certain industrial wastes in our operations. Many of our current and former properties are or have been used for industrial purposes. Accordingly, we could become subject to potentially material liabilities relating to the investigation and cleanup of contaminated

12

properties, and to claims alleging personal injury or property damage as the result of exposures to, or releases of, hazardous substances. These laws also may provide for “strict liability” for damages to natural resources or threats to public health and safety. Strict liability can render a party liable for environmental damage without regard to negligence or fault on the part of the party. Some environmental laws provide for joint and several strict liability for remediation of spills and releases of hazardous substances.

Stricter enforcement of existing laws and regulations, new laws and regulations, the discovery of previously unknown contamination or the imposition of new or increased requirements could restrict our expansion efforts, require us to incur costs, or become the basis of new or increased liabilities. Any of these events could reduce our earnings and our cash available for operations.

Our international operations subject us to risks inherent in doing business on an international level that could adversely impact our results of operations.

International revenues accounted for approximately 21%, 23% and 24% of our total revenues in 2011, 2010 and 2009, respectively. We may not succeed in overcoming the risks that relate to or arise from operating in international markets. Risks inherent in doing business on an international level include, among others, the following:

• economic and political instability (including as a result of the threat or occurrence of armed international conflict or terrorist attacks);

• changes in regulatory requirements, tariffs, customs, duties and other trade barriers;

• transportation delays and costs;

• power supply shortages and shutdowns;

• difficulties in staffing and managing foreign operations and other labor problems;

• currency rate fluctuations, convertibility and repatriation;

• taxation of our earnings and the earnings of our personnel;

• potential expropriation of assets by foreign governments; and

• other risks relating to the administration of or changes in, or new interpretations of, the laws, regulations and policies of the jurisdictions in which we conduct our business.

In particular, we are subject to risks associated with our production facilities in Luoyang, China, and Kopeysk, Russia. The legal systems in both China and Russia are still developing and are subject to change. Accordingly, our operations and orders for products in both countries could be adversely impacted by changes to or interpretation of each country’s law. Further, if manufacturing in either region is disrupted, our overall capacity could be significantly reduced and sales and/or profitability could be negatively impacted.

The manufacture of resin-coated sand is a new process for us.

Resin-coated sand is an alternative to the Company’s traditional ceramic proppant and involves a different manufacturing process that utilizes a different raw material. The expansion of our resin-coated sand operations involves capital expenditures and new operational requirements. If we are unable to secure adequate, cost effective supply commitments for the raw materials associated with resin-coated sand or if we are unable to successfully and efficiently construct the needed additional manufacturing capacity and infrastructure to produce resin-coated sand, our ability to sell this product to the marketplace at profitable margins may be adversely impacted. A lack of sales of resin-coated sand or the inability to control the costs associated with manufacturing this product could have a material adverse effect on our results from operations and financial condition.

13

Undetected defects in our fracture simulation software could adversely affect our business.

Despite extensive testing, our software could contain defects, bugs or performance problems. If any of these problems are not detected, the Company could be required to incur extensive development costs or costs related to product recalls or replacements. The existence of any defects, errors or failures in our software products may subject us to liability for damages, delay the development or release of new products and adversely affect market acceptance or perception of our software products or related services, any one of which could materially and adversely affect the Company’s business, results of operations and financial condition.

The market price of our common stock will fluctuate, and could fluctuate significantly.

The market price of the Company’s common stock will fluctuate, and could fluctuate significantly, in response to various factors and events, including the following:

• the liquidity of the market for our common stock;

• differences between our actual financial or operating results and those expected by investors and analysts;

• changes in analysts’ recommendations or projections;

• new statutes or regulations or changes in interpretations of existing statutes and regulations affecting our business;

• changes in general economic or market conditions; and

• broad market fluctuations.

Our actual results could differ materially from results anticipated in forward-looking statements we make.

Some of the statements included or incorporated by reference in this Form 10-K are forward-looking statements. These forward-looking statements include statements relating to trends in the natural gas and oil industries, the demand for ceramic proppant and our performance in the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business” sections of this Form 10-K. In addition, we have made and may continue to make forward-looking statements in other filings with the SEC, and in written material, press releases and oral statements issued by us or on our behalf. Forward-looking statements include statements regarding the intent, belief or current expectations of the Company or its officers. Our actual results could differ materially from those anticipated in these forward-looking statements. (See “Business–Forward-Looking Information.”)

Item 1B. Unresolved Staff Comments

Not applicable.

Item 2. Properties

The Company maintains its corporate headquarters in leased office space in Houston and also leases space for its technology center in Houston. The Company owns its manufacturing facilities, land and substantially all of the related production equipment in New Iberia, Louisiana, Eufaula, Alabama, and Kopeysk, Russia and leases its McIntyre and Toomsboro, Georgia, facilities. The Company owns the buildings and production equipment at its facility in Luoyang, China, and has been granted use of the land on which the facility is located through 2051 under the terms of a land use agreement with the People’s Republic of China.

The facilities in McIntyre and Toomsboro, Georgia, include real property, plant and equipment that are leased by the Company from the Development Authority of Wilkinson County. The original lease was executed in 1997 and was last amended in 2008. The term of the current lease, which covers both locations, terminates on

14

November 1, 2013, subject to the Company’s ability to renew the lease through November 2021. Under the terms of the lease, the Company is responsible for all costs incurred in connection with the premises, including costs of construction of the plant and equipment. At the termination of the lease, title to all of the real property, plant and equipment is to be conveyed to the Company in exchange for nominal consideration. The Company has the right to purchase the property, plant and equipment at any time during the term of the lease for a nominal price.

The Marshfield, Wisconsin resin-coating facility and sand processing plant currently under construction are located on land owned by the Company. In 2011, the Company purchased land in the Millen, Georgia area for prospective use as a new ceramic proppant manufacturing facility.

The Company owns or otherwise utilizes distribution facilities in multiple locations around the world. See “Item 1. Business – Distribution.”

The Company owns approximately 4,000 acres of land and leasehold interests near its plants in Georgia and Alabama. The land contains raw material for use in the production of the Company’s lightweight ceramic proppants. The Company also holds approximately 490 acres of land and leasehold interests in Wisconsin near its resin-coating facility under construction in Marshfield, Wisconsin.

Falcon Technologies owns its service facility located in Decatur, Texas, and leases other regional service facilities within the United States.

Item 3. Legal Proceedings

On August 4, 2011, the Company was named as a defendant in a civil lawsuit filed by C-E Minerals, Inc. (“C-E”) in the United States District Court for the Northern District of Georgia, Atlanta Division (the “Court”). C-E has alleged that a mutual non-competition provision contained in a Raw Material Requirements Agreement between C-E and CARBO Ceramics Inc., dated June 1, 2003, is invalid under federal antitrust law and applicable state law. The covenant generally prohibits C-E from engaging in the manufacture or sale of ceramic proppant, and prohibits the Company from engaging in the business of selling calcined clay through the end of 2013 (three years after the termination date of the agreement). C-E is seeking a declaratory judgment that the covenant is invalid, along with a preliminary and permanent injunction that would prevent the enforcement of the covenant. C-E is also seeking to recover its attorney’s fees from the Company. C-E subsequently amended its complaint on September 15, 2011 to further allege that the Company has certain monopoly power and has asked for declaratory and injunctive relief that would prevent the Company from enforcing certain damages provisions in its sales contracts. The Company believes that C-E’s allegations are without merit and is vigorously defending the lawsuit. In addition, the Company has filed a counter-claim against C-E seeking injunctive relief and damages in connection with sales of ceramic proppant by C-E and its affiliates. C-E has filed a motion for a preliminary injunction that would prohibit the enforcement of the non-competition provision. The Court held a hearing on this motion on February 15, 2012 and a decision is pending.

On February 9, 2012, the Company and two of its officers, Gary A. Kolstad and Ernesto Bautista III, were named as defendants in a purported class-action lawsuit filed in the United States District Court for the Southern District of New York. The suit alleged violations of the Federal securities laws arising from statements concerning the Company’s business operations and business prospects that were made between October 27, 2011 and January 26, 2012, and requests unspecified damages and costs. While the lawsuit is in its preliminary stages, the Company does not believe it has merit, and plans to vigorously contest and defend against it.

Additionally, from time to time, the Company is the subject of legal proceedings arising in the ordinary course of business. The Company does not believe that any of these proceedings will have a material effect on its business or its results of operations.

The Company cannot predict the ultimate outcome or duration of any lawsuit described in this report.

15

Item 4. Mine Safety Disclosure

Several of our U.S. manufacturing facilities process mined minerals, and therefore are viewed as mine operations subject to regulation by the federal Mine Safety and Health Administration under the Federal Mine Safety and Health Act of 1977. Information concerning mine safety violations or other regulatory matters required by section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act and the recently proposed Item 106 of Regulation S-K (17 CFR 229.106) is included in Exhibit 95 to this annual report.

16

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Common Stock Market Prices, Dividends and Stock Repurchases

The Company’s common stock is traded on the New York Stock Exchange (ticker symbol CRR). The number of record and beneficial holders of the Company’s common stock as of February 1, 2012 was approximately 37,195.

The following table sets forth the high and low sales prices of the Company’s common stock on the New York Stock Exchange and dividends for the last two fiscal years:

	2011						2010
	Sales Price				Cash Dividends		Sales Price				Cash Dividends
Quarter Ended	High		Low		Declared (1)		High		Low		Declared (2)
March 31	$	141.12	$	98.80	$	0.40	$	72.08	$	59.27	$	0.36
June 30		162.95		127.54		—		77.86		62.09		—
September 30		180.25		102.53		0.48		83.81		72.10		0.40
December 31		155.94		94.18		—		103.81		77.98		—

(1) Represents quarters during which dividends were declared. The payment months for cash dividends were February 2011 ($0.20), May 2011 ($0.20), August 2011 ($0.24) and November 2011 ($0.24).

(2) Represents quarters during which dividends were declared. The payment months for cash dividends were February 2010 ($0.18), May 2010 ($0.18), August 2010 ($0.20) and November 2010 ($0.20).

The Company currently expects to continue its policy of paying quarterly cash dividends, although there can be no assurance as to future dividends because they depend on future earnings, capital requirements and financial condition.

On August 28, 2008, the Company’s Board of Directors authorized the repurchase of up to two million shares of the Company’s common stock. Shares are effectively retired at the time of purchase. The Company did not repurchase any shares under this repurchase plan during the fourth quarter of 2011. As of December 31, 2011, the Company has repurchased and retired 1,817,576 shares at an aggregate price of $72.6 million.

The following table provides information about the Company’s repurchases of common stock during the quarter ended December 31, 2011, all of which represent shares surrendered to the Company for tax withholding obligations upon the vesting of restricted stock:

ISSUER PURCHASES OF EQUITY SECURITIES

Period	Total Number of Shares Purchased			Average Price Paid per Share		Total Number of Shares Purchased as Part of Publicly Announced Plan (1)		Maximum Number of Shares that May Yet be Purchased Under the  Plan (2)
10/01/11 to 10/31/11		414	(3)	$	115.36		—		182,424
11/01/11 to 11/30/11		—		$	—		—		182,424
12/01/11 to 12/31/11		268	(3)	$	144.01		—		182,424
Total		682	(3)				—

(1) On August 28, 2008, the Company announced the authorization by its Board of Directors for the repurchase of up to two million shares of its Common Stock.

17

(2) Represents the maximum number of shares that may be repurchased under the previously announced authorization as of period end. As of February 20, 2012, a maximum of 122,424 shares may be repurchased under the previously announced authorization.

(3) Represents shares of stock withheld for the payment of withholding taxes upon the vesting of restricted stock.

Stock Performance Graph

The following graph compares the cumulative shareholder return on the Company’s common stock versus the total cumulative return on the S&P 500 Stock Index and the S&P Small Cap 600, Oil & Gas Equipment & Services Sub-Industry Group. The comparison assumes $100 was invested as of December 31, 2006 and all dividends were reinvested.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*

Among CARBO Ceramics, Inc., the S&P 500 Index,

and S&P SmallCap 600 - Oil & Gas Equipment & Services Index

*$100 invested on 12/31/06 in stock or index, including reinvestment of dividends. Fiscal year ending December 31.

Copyright^© 2012 S&P, a division of The McGraw-Hill Companies Inc. All rights reserved.

18

Item 6. Selected Financial Data

The following selected financial data are derived from the audited consolidated financial statements of the Company. The data should be read in conjunction with Management’s Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and notes thereto included elsewhere in this Form 10-K. The Company has determined that its outstanding non-vested restricted stock awards are participating securities. Accordingly, effective January 1, 2009, earnings per common share are computed using the two-class method prescribed by ASC Topic 260 “Earnings Per Share.” All previously reported earnings per common share data were retrospectively adjusted to conform to the new computation method.

	Years ended December 31,
	2011			2010			2009		2008		2007
	($ in thousands, except per share data)
Statement of Income Data:
Revenues	$	625,705		$	473,082		$	341,872	$	387,828	$	299,996
Cost of sales		363,990			298,411			221,369		260,394		198,070
Gross profit		261,715			174,671			120,503		127,434		101,926
Selling, general and administrative expenses (1)		64,113			55,061			41,053		40,351		30,467
Operating profit		197,602			119,610			79,450		87,083		71,459
Other (expense) income, net		(152	)		(261	)		344		1,266		3,120
Income before income taxes		197,450			119,349			79,794		88,349		74,579
Income taxes		67,314			40,633			26,984		27,944		24,938
Income from continuing operations		130,136			78,716			52,810		60,405		49,641
Discontinued operations (2):
Income from discontinued operations, net of taxes		—			—			—		5,784		4,229
Gain on disposal of discontinued operations, net of tax		—			—			—		44,127		—
Net income	$	130,136		$	78,716		$	52,810	$	110,316	$	53,870
Earnings per basic share:
Income from continuing operations	$	5.62		$	3.41		$	2.27	$	2.47	$	2.03
Income from discontinued operations		—			—			—		0.24		0.17
Gain on disposal of discontinued operations		—			—			—		1.81		—
Basic earnings per share	$	5.62		$	3.41		$	2.27	$	4.52	$	2.20
Earnings per diluted share:
Income from continuing operations	$	5.62		$	3.40		$	2.27	$	2.46	$	2.02
Income from discontinued operations		—			—			—		0.24		0.17
Gain on disposal of discontinued operations		—			—			—		1.81		—
Diluted earnings per share	$	5.62		$	3.40		$	2.27	$	4.51	$	2.19

19

	December 31,
	2011		2010		2009		2008		2007
	($ in thousands, except per share data)
Balance Sheet Data:
Current assets	$	302,565	$	237,655	$	218,870	$	293,310	$	190,924
Current liabilities		79,066		51,247		32,458		83,848		33,264
Property, plant and equipment, net		392,659		338,483		270,722		244,902		253,261
Total assets		740,865		599,571		513,412		546,877		451,523
Total shareholders’ equity		630,158		521,979		457,316		442,534		389,439
Cash dividends per share	$	0.88	$	0.76	$	0.70	$	0.62	$	0.52
Discontinued operations (included above) (2):
Assets held for sale	$	—	$	—	$	—	$	—	$	66,191
Liabilities held for sale		—		—		—		—		4,024

(1) Selling, general and administrative (SG&A) expenses for 2011, 2010, 2009, 2008 and 2007 include costs of start-up activities of $184, $977, none, $1,108, and $1,215, respectively. Start-up costs for 2011 relate primarily to the start-up of the fourth production line at the Company’s Toomsboro, Georgia facility. Start-up costs for 2010 relate to the start-up of the first resin-coating line within the Company’s existing manufacturing infrastructure at the New Iberia, Louisiana facility and the start-up of the third production line at the Company’s Toomsboro, Georgia facility. Start-up costs for 2008 relate to the start-up of the second production line at the Company’s Toomsboro, Georgia facility and the reopening of the New Iberia, Louisiana manufacturing facility previously idled earlier during 2008. Start-up costs for 2007 are related primarily to the new production facility in Kopeysk, Russia. SG&A expenses in 2011, 2010, 2009, 2008 and 2007 also include losses of $1,548, $1,449, $156, $1,599, and $268, respectively, associated with the write-off of a prepayment for the purchase of ceramic proppant from a China proppant manufacturer in 2008 and disposal of certain equipment, impairment of goodwill and certain software, and a write-down of a cost-method investment in other years.

(2) On October 10, 2008, the Company completed the sale of its fracture and reservoir diagnostics business, the Pinnacle name and related trademarks. Consequently, these operations are presented as discontinued operations and the related assets and liabilities are presented as held for sale. At December 31, 2007, assets and liabilities held for sale are presented as current assets and current liabilities, respectively.

20

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Executive Level Overview

CARBO Ceramics Inc. generates revenue primarily through the sale of products and services to the oil and gas industry. The Company’s principal business consists of manufacturing and selling ceramic proppant and resin-coated sand for use primarily in the hydraulic fracturing of oil and natural gas wells. The Company also provides the industry’s most popular hydraulic fracture simulation software FracPro^®, as well as hydraulic fracture design, consulting and geotechnical monitoring services.

In October 2009, Falcon Technologies, a wholly-owned subsidiary of the Company, purchased substantially all of the assets of BBL Falcon Industries, Ltd., a supplier of spill prevention, containment and countermeasure systems for the oil and gas industry. The acquisition was made for the purpose of expanding the Company’s product and service offerings to its existing client base. Falcon Technologies uses proprietary technology to provide products that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials.

During 2010, the Company began production of resin-coated ceramic (CARBOBOND^®LITE^®) and resin-coated sand (CARBOBOND^® RCS) proppants. The introduction of CARBOBOND^®LITE^® addresses a market in which oil and natural gas wells are subject to a high risk of proppant flow-back. The adhesive property of the resin allows the ceramic proppant pack to adhere in place and therefore reduce the risk of proppant flow-back. In the case of CARBOBOND^® RCS, the Company made the strategic decision to offer a lower cost, lower conductivity alternative to its ceramic proppants thereby broadening its proppant suite of products. Management of the Company believes that this is a natural extension of our core business and enhances our highly conductive proppant offering.

The Company’s products and services help oil and gas producers increase production and recovery rates from their wells, thereby lowering overall reservoir development costs. As a result, the Company’s business is dependent to a large extent on the level of drilling activity in the oil and gas industry worldwide. Although the Company’s ceramic proppants are more expensive than alternative non-ceramic proppants, the Company has been able to demonstrate the cost-effectiveness of its products to numerous operators of oil and gas wells through increased technical marketing activity. The Company believes its future prospects benefit from both an increase in drilling activity worldwide and the desire of industry participants to improve production results and lower their overall development costs.

The Company believes international sales will continue to represent an important role in its business. International revenues represented 21%, 23% and 24% of total revenues in 2011, 2010 and 2009, respectively.

Management believes the addition of new manufacturing capacity is critical to the Company’s ability to continue its long-term growth in sales volume and revenue for ceramic proppant, resin-coated ceramic proppant and resin-coated sand. In regards to expansion, the Company has recently completed the construction of a fourth production line at its Toomsboro facility which increases ceramic proppant production capacity by 250 million pounds annually and brings the Company’s total ceramic proppant stated capacity to 1.7 billion pounds per year. With respect to resin-coating capacity expansion, the second production line in New Iberia, Louisiana was completed during the first quarter of 2012 and a 600 million pound per year resin-coating facility is under construction in Marshfield, Wisconsin. Raw sand processing facilities at this location are expected to be completed during the first half of 2012, and resin-coating facilities are expected to be completed near the end of 2012. Additionally, the Company has purchased a site and submitted environment permit applications for a new plant in the Millen, Georgia area. This plant is targeted with initial production capacity of up to 500 million pounds of ceramic proppant annually and a manufacturing line that represents a portion of this initial capacity could commence production before the end of 2013. Although the Company has operated near or at full capacity at times during the previous ten years, the addition of significant new capacity, as well as the addition of resin-coating capacity, could adversely impact operating profit margins if the timing of this new capacity does not

21

match increases in demand for the Company’s products. In addition, the ability to construct new capacity will be contingent upon the receipt of all needed environmental emission permits. See “Item 1—Business” and “Item 1A—Risk Factors”

Operating profit margin for the Company’s ceramic proppant business is principally impacted by manufacturing costs, sales price and the Company’s production levels as a percentage of its capacity. Although most direct production expenses have been relatively stable or predictable over time, the Company has experienced volatility in the cost of natural gas, which is used in production by the Company’s domestic manufacturing facilities, and bauxite, which is the primary raw material for production of the Company’s high strength ceramic proppant. The cost of natural gas has been a significant component of total monthly domestic direct production expense over the last four years. In an effort to mitigate volatility in the cost of natural gas purchases and reduce exposure to short term spikes in the price of this commodity, the Company contracts in advance for portions of its future natural gas requirements. Despite the efforts to reduce exposure to changes in natural gas prices, it is possible that, given the significant portion of manufacturing costs represented by this item, gross margins as a percentage of sales may decline and changes in net income may not directly correlate to changes in revenue.

With regard to resin-coating and sand operations, the Company recently completed a second resin-coating line at its New Iberia, Louisiana facility and is adding additional resin-coating capacity as well as raw sand processing facilities in Marshfield, Wisconsin. The Company also continues to work towards purchasing and developing its own northern white sand reserves. The production of resin-coated sand is a different process than the manufacture of ceramic proppant, and profit margins associated with resin-coated sand are not anticipated to be as high as those historically received for the Company’s manufactured ceramic proppant.

As the Company has expanded its operations in both domestic and international markets, there has been an increase in activities and expenses related to marketing, distribution, research and development, and finance and administration. As a result, selling, general and administrative expenses have increased in recent years. In the future, the Company expects to continue to actively pursue new business opportunities by:

• increasing marketing activities globally;

• improving and expanding its distribution capabilities; and

• focusing on new product development.

The Company expects that these activities will generate increased revenue. Selling, general and administrative expenses, however, may continue to increase in 2012 from 2011 levels as the Company continues to expand its operations.

General Business Conditions

The Company’s proppant business is impacted by the number of natural gas and oil wells drilled in North America, and the need to hydraulically fracture these wells. In markets outside North America, sales of the Company’s products are also influenced by the overall level of drilling and hydraulic fracturing activity. Furthermore, because the decision to use ceramic proppant is based on comparing the higher initial costs to the future value derived from increased production and recovery rates, the Company’s business is influenced by the current and expected prices of natural gas and oil.

Worldwide oil and natural gas prices and related drilling activity levels remained very strong from 2004 until the second half of 2008. During the second half of 2008, oil and natural gas prices as well as active drilling rigs in North America declined significantly in connection with declines in many of the world’s economies. During the second half of 2009, the North American drilling rig count improved and stabilized during 2010. Late in 2011, a severe decline in natural gas prices led certain customers to reduce drilling activities and capital

22

spending in natural gas basins and increase these items in liquids-rich basins. As a result, the Company experienced a reduction in sales volumes in natural gas fields, including certain shale plays. However, this reduction was offset in part by increased sales volumes in liquids-rich areas. The Company remains cautious with respect to the near-term outlook for natural gas, given the current situation. While natural gas fundamentals recently weakened, the continued strength in oilfield activity by the Company’s clients in oily, liquids-rich plays is encouraging and the Company expects demand for ceramic proppant to remain strong during 2012. Since many of these liquids-rich plays are located in areas of the country that do not have well-developed infrastructure systems, the Company and others in the industry experienced distribution challenges late in 2011. While the Company believes these distribution issues will improve during the first half of 2012, they may continue to be a factor in future operations. Overall, the Company believes its operating results for 2012 will continue to be influenced by the level of oil and natural gas drilling in North America, but expects its ability to demonstrate the value of ceramic proppant relative to alternatives will allow it to continue to generate new sales opportunities, especially in oily, liquids-rich plays.

Critical Accounting Policies

The Consolidated Financial Statements are prepared in accordance with accounting principles generally accepted in the U.S., which require the Company to make estimates and assumptions (see Note 1 to the Consolidated Financial Statements). The Company believes that, of its significant accounting policies, the following may involve a higher degree of judgment and complexity.

Revenue is recognized when title passes to the customer (generally upon delivery of products) or at the time services are performed. The Company generates a significant portion of its revenues and corresponding accounts receivable from sales to the petroleum pressure pumping industry. In addition, the Company generates a significant portion of its revenues and corresponding accounts receivable from sales to two major customers, both of which are in the petroleum pressure pumping industry. As of December 31, 2011, approximately 46% of the balance in trade accounts receivable was attributable to those two customers. The Company records an allowance for doubtful accounts based on its assessment of collectability risk and periodically evaluates the allowance based on a review of trade accounts receivable. Trade accounts receivable are periodically reviewed for collectability based on customers’ past credit history and current financial condition, and the allowance is adjusted, if necessary. If a prolonged economic downturn in the petroleum pressure pumping industry were to occur or, for some other reason, any of the Company’s primary customers were to experience significant adverse conditions, the Company’s estimates of the recoverability of accounts receivable could be reduced by a material amount and the allowance for doubtful accounts could be increased by a material amount. At December 31, 2011, the allowance for doubtful accounts totaled $1.9 million.

The Company values inventory using the weighted average cost method. Assessing the ultimate realization of inventories requires judgments about future demand and market conditions. The Company regularly reviews inventories to determine if the carrying value of the inventory exceeds market value and the Company records an adjustment to reduce the carrying value to market value, as necessary. Future changes in demand and market conditions could cause the Company to be exposed to additional obsolescence or slow moving inventory. If actual market conditions are less favorable than those projected by management, lower of cost or market adjustments may be required.

Income taxes are provided for in accordance with ASC Topic 740, “Income Taxes”. This standard takes into account the differences between financial statement treatment and tax treatment of certain transactions. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect of a change in tax rates is recognized as income or expense in the period that includes the enactment date. This calculation requires the Company to make certain estimates about its future operations. Changes in state, federal and foreign tax laws, as well as changes in the Company’s financial condition, could affect these estimates.

23

Long-lived assets, which include net property, plant and equipment, goodwill, intangibles and other long-term assets, comprise a significant amount of the Company’s total assets. The Company makes judgments and estimates in conjunction with the carrying values of these assets, including amounts to be capitalized, depreciation and amortization methods and useful lives. Additionally, the carrying values of these assets are periodically reviewed for impairment or whenever events or changes in circumstances indicate that the carrying amounts may not be recoverable. An impairment loss is recorded in the period in which it is determined that the carrying amount is not recoverable. This requires the Company to make long-term forecasts of its future revenues and costs related to the assets subject to review. These forecasts require assumptions about demand for the Company’s products and services, future market conditions and technological developments. Significant and unanticipated changes to these assumptions could require a provision for impairment in a future period.

Results of Operations

Net Income

($ in thousands)	2011		Percent Change			2010		Percent Change			2009
Net Income	$	130,136		65	%	$	78,716		49	%	$	52,810

For the year ended December 31, 2011, the Company reported net income of $130.1 million, an increase of 65% compared to the $78.7 million reported in the previous year. During 2011, operations continued to be favorably impacted by continued acceptance of the Company’s products and service offerings. Further, additional production capacity from the completion of the third and fourth production lines at the Company’s Toomsboro, Georgia production facility in 2010 and 2011, respectively, enabled the Company to increase sales volumes. Net income in 2011 increased primarily as a result of a 19% increase in proppant sales volume, a 12% increase in the average proppant selling price, and an increase in the gross profit margin as a percentage of sales, partially offset by higher selling, general and administrative expenses. Income tax expense in 2011 increased due to higher pretax income.

For the year ended December 31, 2010, the Company reported net income of $78.7 million, an increase of 49% compared to the $52.8 million reported in the previous year. During 2010, operations were favorably impacted by improving fundamentals in the oil and gas industry and continued acceptance of the Company’s products and service offerings. Net income in 2010 increased primarily as a result of a 29% increase in proppant sales volume and an increase in the gross profit margin as a percentage of sales, partially offset by higher selling, general and administrative expenses and other operating expenses. Income tax expense in 2010 increased due to higher pretax income.

Individual components of financial results are discussed below.

Revenues

($ in thousands)	2011		Percent Change			2010		Percent Change			2009
Consolidated revenues	$	625,705		32	%	$	473,082		38	%	$	341,872

Revenues of $625.7 million for the year ended December 31, 2011 increased 32% compared to $473.1 million in 2010. Revenues increased primarily due to a 19% increase in proppant sales volume, a 12% increase in the average proppant selling price as a result of price increases and an increase in the revenues of Falcon Technologies. The Company’s worldwide proppant sales volume totaled 1.605 billion pounds during 2011 compared to 1.348 billion pounds in 2010. North American (defined as Canada and the United States) sales volume increased 21% and International (excluding Canada) sales volume increased 12%. North American demand was driven primarily by an increase in the drilling rig count in the United States and Canada as well as

24

continued acceptance of the Company’s products in unconventional resource plays, including shale formations. Additional production capacity from the completion of the third and fourth production lines at the Company’s Toomsboro, Georgia production facility in 2010 and 2011, respectively, enabled the Company to increase sales volumes. Completion of the first resin-coating line at the Company’s New Iberia, Louisiana production facility during the second quarter of 2010, as well as the purchase of ceramic proppant that meets API and ISO standards and is manufactured on an outsourced basis (collectively, “Other Proppants”), also contributed toward improved ability to meet customer demand. Other Proppants represented 129 million pounds of the Company’s worldwide sales volume in 2011, as compared to 66 million pounds in 2010. International sales volume increased primarily due to increases in Russia, Europe and the Asia-Pacific region (including China), partially offset by decreases in Africa and the Middle East. The average selling price per pound of all proppant, including both Company-produced proppant and Other Proppant, was $0.360 per pound in 2011 compared to $0.322 per pound in 2010.

Revenues of $473.1 million for the year ended December 31, 2010 increased 38% compared to $341.9 million in 2009. Revenues increased primarily due to a 29% increase in proppant sales volume, a 2% increase in the average proppant selling price and a full year of operations of Falcon Technologies. The Company’s worldwide proppant sales volume totaled 1.348 billion pounds for the year ended December 31, 2010 compared to 1.043 billion pounds for the same period in 2009. North American (defined as Canada and the U.S.) sales volume increased 29% primarily due to an increase in the drilling rig count in the U.S. and Canada as well as continued acceptance of the Company’s products in unconventional resource plays, including shale formations. International (excluding Canada) sales volume increased 31% primarily due to increases in China, Russia, Africa, Latin America and the Middle East, partially offset by a decrease in Mexico. The average selling price per pound of all proppant was $0.322 per pound in 2010 compared to $0.315 per pound in 2009.

Gross Profit

($ in thousands)	2011			Percent Change			2010			Percent Change			2009
Consolidated gross profit	$	261,715			50	%	$	174,671			45	%	$	120,503
As a % of revenues		42	%					37	%					35	%

The Company’s cost of sales related to proppant manufacturing consists of manufacturing costs, packaging and transportation expenses associated with the delivery of the Company’s products to its customers and handling costs related to maintaining finished goods inventory and operating the Company’s remote stocking facilities. Variable manufacturing costs include raw materials, labor, utilities and repair and maintenance supplies. Fixed manufacturing costs include depreciation, property taxes on production facilities, insurance and factory overhead.

Gross profit for the year ended December 31, 2011 was $261.7 million, or 42% of revenues, compared to $174.7 million, or 37% of revenues, for 2010. The increase in gross profit, as well as gross profit as a percentage of revenues, were primarily the result of higher proppant sales volume, an increase in the average proppant selling price, a change in product mix, and greater contribution from some of the Company’s other business units.

Gross profit for the year ended December 31, 2010 was $174.7 million, or 37% of revenues, compared to $120.5 million, or 35% of revenues, for 2009. The increase in gross profit was primarily the result of higher proppant sales volume, an increase in the average proppant selling price and a full year of operations of Falcon Technologies. Gross profit as a percentage of revenues increased primarily as a result of an increase in the average proppant selling price, lower natural gas costs in the Company’s U.S. manufacturing facilities, and a change in the mix of products sold towards lightweight products, partially offset by higher freight costs.

25

Selling, General & Administrative (SG&A) and Other Operating Expenses

($ in thousands)	2011			Percent Change			2010			Percent Change			2009
Consolidated SG&A and other	$	64,113			16	%	$	55,061			34	%	$	41,053
As a % of revenues		10	%					12	%					12	%

Operating expenses consisted of $62.4 million of SG&A expenses and $1.7 million of other operating expenses for the year ended December 31, 2011 compared to $52.6 million and $2.4 million, respectively, for 2010. The increase in SG&A expenses primarily resulted from higher marketing, research and development, and administrative spending associated with supporting revenue growth. Other operating expenses in 2011 consisted of start-up costs of $0.2 million primarily related to the start-up of the fourth production line at the Company’s Toomsboro, Georgia facility, an impairment of goodwill of $0.9 million related to the Company’s geotechnical monitoring business and a write-down of $0.8 million related to a 6% interest in an investment accounted for under the cost method as a result of the sale of the business by majority shareholders. Other operating expenses in 2010 consisted of start-up costs of $1.0 million related to the start-up of the first resin-coating line within the Company’s existing manufacturing infrastructure at the New Iberia, Louisiana facility and the third production line at the Company’s Toomsboro, Georgia facility, an impairment of goodwill of $0.4 million related to the Company’s geotechnical monitoring business and a $1.0 million loss on equipment disposals mainly related to the Company’s U.S. manufacturing facilities. As a percentage of revenues, SG&A and other operating expenses in 2011 decreased to 10% compared to 12% for the same period in 2010.

Operating expenses consisted of $52.6 million of SG&A expenses and $2.4 million of other operating expenses for the year ended December 31, 2010 compared to $40.9 million and $0.1 million, respectively, for 2009. The increase in SG&A expenses primarily resulted from a full year of operations of Falcon Technologies in 2010 and higher marketing, research and development spending. Other operating expenses in 2010 consisted of start-up costs of $1.0 million related to the start-up of the first resin-coating line within the Company’s existing manufacturing infrastructure at the New Iberia, Louisiana facility and the third production line at the Company’s Toomsboro, Georgia facility, an impairment of goodwill of $0.4 million related to the Company’s geotechnical monitoring business and a $1.0 million loss on equipment disposals mainly related to the Company’s U.S. manufacturing facilities. As a percentage of revenues, SG&A and other operating expenses for 2010 were essentially flat compared to 2009.

Income Tax Expense

($ in thousands)	2011			Percent Change			2010			Percent Change			2009
Income Tax Expense	$	67,314			66	%	$	40,633			51	%	$	26,984
Effective Income Tax Rate		34.1	%					34.0	%					33.8	%

Consolidated income tax expense was $67.3 million, or 34.1% of pretax income, for the year ended December 31, 2011 compared to $40.6 million, or 34.0% of pretax income for 2010. The $26.7 million increase is primarily due to higher pretax income.

Consolidated income tax expense was $40.6 million, or 34.0% of pretax income, for the year ended December 31, 2010 compared to $27.0 million, or 33.8% of pretax income for 2009. The $13.6 million increase is primarily due to higher pretax income.

Liquidity and Capital Resources

At December 31, 2011, the Company had cash and cash equivalents of $41.3 million compared to cash and cash equivalents of $46.7 million at December 31, 2010. During 2011, the Company generated $111.4 million of cash from operating activities, retained $1.4 million from excess tax benefits relating to stock based

26

compensation, received $0.1 million proceeds from exercised stock options and retained $0.1 million from the effect of exchange rate changes on cash. Uses of cash included $90.4 million for capital expenditures, $20.4 million for the payment of cash dividends and $7.6 million for repurchases of the Company’s common stock. Major capital spending in 2011 included construction costs, engineering and procurement on a fourth production line at the Toomsboro facility, construction costs, engineering and procurement on a second resin-coating production line at the New Iberia, Louisiana facility, equipment costs related to a resin-coating facility in Marshfield, Wisconsin, construction and engineering costs related to a sand processing facility in Marshfield, Wisconsin, and replacement of various equipment associated with the McIntyre and Eufaula facilities.

The Company believes its operating results for 2012 will continue to be influenced by the level of oil and natural gas drilling in North America. A severe decline in natural gas prices in the U.S. in late 2011 led businesses engaged in the exploration and production of oil and natural gas to reduce drilling activity and capital spending in natural gas basins, including shale plays, and to increase capital spending towards oily, liquids-rich basins. From the Company’s perspective, the industry’s response to the reallocation of proppant supply and demand and adjustments to the increased supply and decreased prices for natural gas will take some time to work out, and the exact timing of this response is not certain. See “General Business Conditions” above.

While natural gas prices remain low, the continuing shift in oilfield activity by the Company’s clients to oily, liquids-rich plays is encouraging, and the Company believes that demand for high-conductivity ceramic proppant will continue to increase. The Company expects to support demand increases with additions to its production capacity. The recently completed fourth production line at its Toomsboro, Georgia facility increases ceramic proppant production capacity by 250 million pounds annually and brings the Company’s total ceramic proppant capacity to 1.7 billion pounds per year. With respect to resin-coating capacity expansion, the second production line in New Iberia, Louisiana was completed during the first quarter of 2012 and increased the Company’s annual resin-coating capacity to 400 million pounds. A 600 million pound per year resin-coating facility is under construction in Marshfield, Wisconsin. Raw sand processing facilities at this location are expected to be completed during the first half of 2012, and resin-coating facilities are expected to be completed near the end of 2012. Additionally, the Company has completed the due diligence process for a new ceramic proppant manufacturing site and has moved forward with the purchase of a site in Georgia. This plant is targeted with initial production capacity of up to 500 million pounds annually and a manufacturing line that represents a portion of this initial capacity could commence production before the end of 2013. Additionally, during periods of high demand and typically at the request of its customers, the Company may also continue to engage in the sale of ceramic proppant that meets API/ISO standards manufactured on an outsourced basis. During the twelve months ended December 31, 2011, the majority of the increase in finished goods inventory is attributable to this type of proppant. The Company has currently suspended further purchases of this outsourced material.

Subject to its financial condition, the amount of funds generated from operations and the level of capital expenditures, the Company’s current intention is to continue to pay quarterly dividends to holders of its common stock. On January 17, 2012, the Company’s Board of Directors approved the payment of a quarterly cash dividend of $0.24 per share to shareholders of the Company’s common stock on February 1, 2012. The dividend is payable on February 15, 2012. The Company estimates its total capital expenditures in 2012 will be between $120.0 million and $140.0 million, which include costs associated with expansion of the Company’s distribution infrastructure, the construction of the resin-coating and sand processing facilities in Marshfield, Wisconsin, and the construction of the new manufacturing facility in the Millen, Georgia area.

The Company has historically maintained an unsecured line of credit of $10.0 million. In January 2010, the Company obtained a new $10.0 million unsecured line of credit with Wells Fargo Bank, N.A., replacing an expired line of credit with another bank. As of December 31, 2011, there was no outstanding debt under the new credit agreement. Subsequent to December 31, 2011, the Company did borrow funds under the line of credit and as of February 29, 2012 the balance outstanding on the Company’s line of credit was $10.0 million. The Company anticipates that cash on hand, cash provided by operating activities and funds provided by its line of credit will be sufficient to meet planned operating expenses, tax obligations, capital expenditures and other cash needs for the next 12 months. The Company also believes that it could acquire additional debt financing, if needed. Based on these assumptions, the Company believes that its fixed costs could be met even with a moderate decrease in demand for the Company’s products.

27

Off-Balance Sheet Arrangements

The Company had no off-balance sheet arrangements as of December 31, 2011.

Contractual Obligations

The following table summarizes the Company’s contractual obligations as of December 31, 2011:

	Payments due in period
($ in thousands)	Total		Less than 1 year		1 - 3 years		3 - 5 years		More than 5 years
Long-term debt obligations	$	—	$	—	$	—	$	—	$	—
Capital lease obligations		—		—		—		—		—
Operating lease obligations:
—Primarily railroad equipment		116,715		17,010		32,563		27,466		39,676
Purchase obligations:
—Natural gas contracts		91,563		26,003		41,351		24,209		—
—Raw materials contracts		29,655		4,709		11,612		6,667		6,667
Other long-term obligations		—		—		—		—		—
Total contractual obligations	$	237,933	$	47,722	$	85,526	$	58,342	$	46,343

See Note 5 and Note 14 to the Notes to the Consolidated Financial Statements.

Operating lease obligations relate primarily to railroad equipment leases and include leases of other property, plant and equipment.

The Company uses natural gas to power its domestic manufacturing plants. From time to time, the Company enters into contracts to purchase a portion of the anticipated natural gas requirements at specified prices. As of December 31, 2011, the last such contract was due to expire in December 2016.

The Company has entered into contracts to supply raw materials, primarily kaolin and bauxite, to each of its manufacturing plants. Each of the contracts is described in Note 14 to the Notes to the Consolidated Financial Statements. Three of the contracts do not require the Company to purchase minimum annual quantities, but do require the purchase of minimum annual percentages, ranging from 70% to 80% of the respective plants’ requirements for the specified raw materials. Two outstanding contracts require the Company to purchase a minimum annual quantity of material.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

The Company’s major market risk exposure is to foreign currency fluctuations that could impact its investments in China and Russia. As of December 31, 2011, the Company’s net investment that is subject to foreign currency fluctuations totaled $87.2 million, and the Company has recorded a cumulative foreign currency translation loss of $3.9 million, net of deferred income tax benefit. This cumulative translation loss is included in Accumulated Other Comprehensive Loss. From time to time, the Company may enter into forward foreign exchange contracts to hedge the impact of foreign currency fluctuations. There were no such foreign exchange contracts outstanding at December 31, 2011.

The Company has a $10.0 million revolving credit agreement with a bank. Under the terms of the agreement, the Company has the option of choosing either the bank’s fluctuating Base Rate or LIBOR Fixed Rate, plus an Applicable Margin, all as defined in the credit agreement. There were no borrowings outstanding under the agreement at December 31, 2011. The Company does not believe that it has any material exposure to market risk associated with interest rates.

28

The Company is subject to the risk of market price fluctuations of certain commodities, such as natural gas, and utilizes forward purchase contracts to manage or reduce market risks relating to these costs. The Company does not enter into these transactions for speculative or trading purposes. The Company expects to take delivery of the underlying natural gas and, as such, does not currently believe the market risk exposure on these instruments to be material. As of December 31, 2011, $91.6 million of natural gas forward contracts were outstanding for delivery of gas through 2016.

Item 8. Financial Statements and Supplementary Data

The information required by this Item is contained in pages F-3 through F-22 of this Report.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

Item 9A. Controls and Procedures

(a) Evaluation of Disclosure Controls and Procedures

Disclosure controls and procedures are designed to ensure that information required to be disclosed in the reports filed or submitted under the Securities Exchange Act of 1934 (the “Exchange Act”) is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in the reports filed under the Exchange Act is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

As of December 31, 2011, management carried out an evaluation, under the supervision and with the participation of the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures. There are inherent limitations to the effectiveness of any system of disclosure controls and procedures. Accordingly, even effective disclosure controls and procedures can only provide reasonable assurances of achieving their control objectives. Based upon and as of the date of that evaluation, the Chief Executive Officer and Chief Financial Officer have concluded that the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed by the Company in the reports it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms, and to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

(b) Management’s Report on Internal Control Over Financial Reporting

For Management’s Report on Internal Control Over Financial Reporting, see page F-1 of this Report.

(c) Report of Independent Registered Public Accounting Firm

For the Report of Independent Registered Public Accounting Firm on the Company’s internal control over financial reporting, see page F-2 of this Report.

(d) Changes in Internal Control over Financial Reporting

29

There were no changes in the Company’s internal control over financial reporting during the quarter ended December 31, 2011, that materially affected, or are reasonably likely to materially affect, those controls.

Item 9B. Other Information

Not applicable.

30

PART III

Certain information required by Part III is omitted from this Report. The Company will file a definitive proxy statement pursuant to Regulation 14A (the “Proxy Statement”) not later than 120 days after the end of the fiscal year covered by this Report and certain information included therein is incorporated herein by reference. Only those sections of the Proxy Statement that specifically address the items set forth herein are incorporated by reference. Such incorporation does not include the Compensation Committee Report included in the Proxy Statement.

Item 10. Directors, Executive Officers and Corporate Governance

Information concerning executive officers under Item 401 of Regulation S-K is set forth in Part I of this Form 10-K. The other information required by this Item is incorporated by reference to the portions of the Company’s Proxy Statement entitled “Security Ownership of Certain Beneficial Owners and Management,” “Election of Directors,” “Board of Directors, Committees of the Board of Directors and Meeting Attendance,” “Code of Business Conduct and Ethics,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Report of the Audit Committee.”

Item 11. Executive Compensation

The information required by this Item is incorporated by reference to the portions of the Company’s Proxy Statement entitled “Compensation of Executive Officers,” “Director Compensation” and “Potential Termination and Change in Control Payments.”

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by this Item is incorporated by reference from the Company’s Proxy Statement under the captions “Securities Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information.”

Item 13. Certain Relationships and Related Transactions, and Director Independence

The information required by this Item is incorporated by reference to the portion of the Company’s Proxy Statement entitled “Election of Directors.”

Item 14. Principal Accounting Fees and Services

The information required by this Item is incorporated by reference to the portion of the Company’s Proxy Statement entitled “Ratification of Appointment of the Company’s Independent Registered Public Accounting Firm.”

31

PART IV

Item 15. Exhibits, Financial Statement Schedules

(a) Exhibits, Financial Statements and Financial Statement Schedules:

1. Consolidated Financial Statements

The Consolidated Financial Statements of CARBO Ceramics Inc. listed below are contained in pages F-3 through F-22 of this Report:

Report of Independent Registered Public Accounting Firm

Consolidated Balance Sheets at December 31, 2011 and 2010

Consolidated Statements of Income for each of the three years ended December 31, 2011, 2010 and 2009

Consolidated Statements of Shareholders’ Equity for each of the three years ended December 31, 2011, 2010 and 2009

Consolidated Statements of Cash Flows for each of the three years ended December 31, 2011, 2010 and 2009

2. Consolidated Financial Statement Schedules

All schedules have been omitted since they are either not required or not applicable.

3. Exhibits

The exhibits listed on the accompanying Exhibit Index are filed as part of, or incorporated by reference into, this Report.

32

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

CARBO Ceramics Inc.
By:	/s/ Gary A Kolstad
	Gary A. Kolstad
	President and Chief Executive Officer
By:	/s/ Ernesto Bautista III
	Ernesto Bautista III
	Vice President and
	Chief Financial Officer

Dated: February 29, 2012

33

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Gary A. Kolstad and Ernesto Bautista III, jointly and severally, his attorneys-in-fact, each with the power of substitution, for him in any and all capacities, to sign any amendments to this Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

Signature	Title	Date
/s/ William C. Morris	Chairman of the Board	February 29, 2012
William C. Morris
/s/ Gary A. Kolstad	President, Chief Executive Officer and	February 29, 2012
Gary A. Kolstad	Director (Principal Executive Officer)
/s/ Ernesto Bautista III	Vice President and	February 29, 2012
Ernesto Bautista III	Chief Financial Officer
	(Principal Financial and
	Accounting Officer)
/s/ Sigmund L. Cornelius	Director	February 29, 2012
Sigmund L. Cornelius
/s/ James B. Jennings	Director	February 29, 2012
James B. Jennings
/s/ H.E. Lentz, Jr.	Director	February 29, 2012
H.E. Lentz, Jr.
/s/ Randy L. Limbacher	Director	February 29, 2012
Randy L. Limbacher
/s/ Robert S. Rubin	Director	February 29, 2012
Robert S. Rubin

34

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with generally accepted accounting principles.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management, including our Chief Executive Officer and our Chief Financial Officer, assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2011. In making this assessment, it used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control–Integrated Framework. Based on its assessment and those criteria, management has concluded that the Company maintained effective internal control over financial reporting as of December 31, 2011.

The Company’s independent registered public accounting firm, Ernst & Young LLP, has issued an attestation report on the Company’s internal control over financial reporting. That report is included herein.

F-1

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders

CARBO Ceramics Inc.

We have audited CARBO Ceramics Inc.’s internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control–Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). CARBO Ceramics Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, CARBO Ceramics Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of CARBO Ceramics Inc. as of December 31, 2011, and 2010, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2011 and our report dated February 29, 2012 expressed an unqualified opinion thereon.

/s/    ERNST & YOUNG LLP

New Orleans, Louisiana

February 29, 2012

F-2

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders

CARBO Ceramics Inc.

We have audited the accompanying consolidated balance sheets of CARBO Ceramics Inc. as of December 31, 2011 and 2010, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2011. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of CARBO Ceramics Inc. at December 31, 2011 and 2010, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2011, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), CARBO Ceramics Inc.’s internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 29, 2012 expressed an unqualified opinion thereon.

/s/    ERNST & YOUNG LLP

New Orleans, Louisiana

February 29, 2012

F-3

CARBO CERAMICS INC.

CONSOLIDATED BALANCE SHEETS

($ in thousands, except per share data)

	December 31,
	2011			2010
ASSETS
Current assets:
Cash and cash equivalents	$	41,270		$	46,656
Trade accounts and other receivables, net		112,014			89,531
Inventories:
Finished goods, net		105,233			47,872
Raw materials and supplies		26,783			43,183
Total inventories		132,016			91,055
Prepaid expenses and other current assets		4,023			2,970
Prepaid income taxes		3,279			—
Deferred income taxes		9,963			7,443
Total current assets		302,565			237,655
Property, plant and equipment:
Land and land improvements		14,512			14,074
Land-use and mineral rights		8,610			8,041
Buildings		67,120			56,442
Machinery and equipment		455,563			362,286
Construction in progress		48,778			67,551
Total		594,583			508,394
Less accumulated depreciation and amortization		201,924			169,911
Net property, plant and equipment		392,659			338,483
Goodwill		12,164			13,053
Intangible and other assets, net		33,477			10,380
Total assets	$	740,865		$	599,571
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Accounts payable	$	38,192		$	22,161
Accrued payroll and benefits		17,237			12,755
Accrued freight		10,911			5,186
Accrued utilities		3,704			3,523
Accrued income taxes		—			113
Other accrued expenses		9,022			7,509
Total current liabilities		79,066			51,247
Deferred income taxes		31,641			26,345
Shareholders’ equity:
Preferred stock, par value $0.01 per share, 5,000 shares authorized, none outstanding		—			—
Common stock, par value $0.01 per share, 40,000,000 shares authorized; 23,106,358 and 23,108,082 shares issued and outstanding at December 31, 2011 and 2010, respectively		231			231
Additional paid-in capital		56,539			57,475
Retained earnings		577,253			468,387
Accumulated other comprehensive loss		(3,865	)		(4,114	)
Total shareholders’ equity		630,158			521,979
Total liabilities and shareholders’ equity	$	740,865		$	599,571

See accompanying notes to consolidated financial statements.

F-4

CARBO CERAMICS INC.

CONSOLIDATED STATEMENTS OF INCOME

($ in thousands, except per share data)

	Years ended December 31,
	2011			2010			2009
Revenues	$	625,705		$	473,082		$	341,872
Cost of sales		363,990			298,411			221,369
Gross profit		261,715			174,671			120,503
Selling, general and administrative expenses		62,381			52,635			40,897
Start-up costs		184			977			—
Loss on disposal or impairment of assets		1,548			1,449			156
Operating profit		197,602			119,610			79,450
Other income (expense):
Interest income, net		197			178			451
Foreign currency exchange loss, net		(135	)		(96	)		(192	)
Other, net		(214	)		(343	)		85
		(152	)		(261	)		344
Income before income taxes		197,450			119,349			79,794
Income taxes		67,314			40,633			26,984
Net income	$	130,136		$	78,716		$	52,810
Earnings per share:
Basic	$	5.62		$	3.41		$	2.27
Diluted	$	5.62		$	3.40		$	2.27

See accompanying notes to consolidated financial statements.

F-5

CARBO CERAMICS INC.

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

($ in thousands, except per share data)

	Common Stock			Additional Paid-In Capital			Retained Earnings			Accumulated Other Comprehensive Income (Loss)			Total
Balances at January 1, 2009	$	236		$	73,460		$	371,602		$	(2,764	)	$	442,534
Net income		—			—			52,810			—			52,810
Foreign currency translation adjustment, net of tax of $1,454		—			—			—			(2,445	)		(2,445	)
Comprehensive income														50,365
Exercise of stock options		1			895			—			—			896
Tax benefit from stock based compensation		—			261			—			—			261
Stock granted under restricted stock plan, net		1			(1	)		—			—			—
Stock based compensation		—			2,302			—			—			2,302
Shares repurchased and retired		(7	)		(22,556	)		—			—			(22,563	)
Shares surrendered by employees to pay taxes		—			—			(192	)		—			(192	)
Cash dividends ($0.70 per share)		—			—			(16,287	)		—			(16,287	)
Balances at December 31, 2009		231			54,361			407,933			(5,209	)		457,316
Net income		—			—			78,716			—			78,716
Foreign currency translation adjustment, net of tax benefit of ($599)		—			—			—			1,095			1,095
Comprehensive income														79,811
Exercise of stock options		—			254			—			—			254
Tax benefit from stock based compensation		—			801			—			—			801
Stock granted under restricted stock plan, net		—			79			—			—			79
Stock based compensation		—			3,192			—			—			3,192
Shares repurchased and retired		—			(1,212	)		—			—			(1,212	)
Shares surrendered by employees to pay taxes		—			—			(692	)		—			(692	)
Cash dividends ($0.76 per share)		—			—			(17,570	)		—			(17,570	)
Balances at December 31, 2010		231			57,475			468,387			(4,114	)		521,979
Net income		—			—			130,136			—			130,136
Foreign currency translation adjustment, net of tax benefit of ($1,447)		—			—			—			249			249
Comprehensive income														130,385
Exercise of stock options		—			76			—			—			76
Tax benefit from stock based compensation		—			1,412			—			—			1,412
Stock granted under restricted stock plan, net		—			223			—			—			223
Stock based compensation		—			4,002			—			—			4,002
Shares repurchased and retired		—			(6,649	)		—			—			(6,649	)
Shares surrendered by employees to pay taxes		—			—			(901	)		—			(901	)
Cash dividends ($0.88 per share)		—			—			(20,369	)		—			(20,369	)
Balances at December 31, 2011	$	231		$	56,539		$	577,253		$	(3,865	)	$	630,158

See accompanying notes to consolidated financial statements.

F-6

CARBO CERAMICS INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

($ in thousands)

	Years ended December 31,
	2011			2010			2009
Operating activities
Net income	$	130,136		$	78,716		$	52,810
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization		36,015			27,728			24,905
Provision for doubtful accounts		229			40			516
Deferred income taxes		4,223			2,662			573
Excess tax benefits from stock based compensation		(1,399	)		(759	)		(225	)
Loss on disposal or impairment of assets		1,548			1,449			156
Foreign currency transaction loss, net		135			96			192
Stock compensation expense		4,719			3,812			2,571
Changes in operating assets and liabilities:
Trade accounts and other receivables		(23,101	)		(29,857	)		8,119
Inventories		(41,704	)		(10,818	)		(14,639	)
Prepaid expenses and other current assets		(1,142	)		(174	)		(606	)
Long-term prepaid expenses		(24,083	)		(14	)		236
Accounts payable		15,971			13,439			(7,971	)
Accrued expenses		11,846			8,160			(529	)
Accrued income taxes, net		(1,980	)		(2,695	)		(44,058	)
Net cash provided by operating activities		111,413			91,785			22,050
Investing activities
Capital expenditures		(90,395	)		(96,566	)		(46,127	)
Acquisition of BBL Falcon Industries, Ltd.		—			193			(23,000	)
Purchase of short-term investment		—			(4,989	)		—
Proceeds from maturity of short-term investment		—			4,989			—
Net cash used in investing activities		(90,395	)		(96,373	)		(69,127	)
Financing activities
Net proceeds from stock based compensation		76			254			896
Dividends paid		(20,369	)		(17,570	)		(16,287	)
Purchase of common stock		(7,550	)		(1,904	)		(22,755	)
Excess tax benefits from stock based compensation		1,399			759			225
Net cash used in financing activities		(26,444	)		(18,461	)		(37,921	)
Effect of exchange rate changes on cash		40			148			(262	)
Net decrease in cash and cash equivalents		(5,386	)		(22,901	)		(85,260	)
Cash and cash equivalents at beginning of year		46,656			69,557			154,817
Cash and cash equivalents at end of year	$	41,270		$	46,656		$	69,557
Supplemental cash flow information
Interest paid	$	1		$	2		$	1
Income taxes paid	$	65,071		$	40,667		$	70,463

See accompanying notes to consolidated financial statements.

F-7

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

($ in thousands, except per share data)

1. Significant Accounting Policies

Description of Business

CARBO Ceramics Inc. (the “Company”) was formed in 1987 and is a manufacturer of ceramic proppants. During 2010, the Company began production of resin-coated ceramic and resin-coated sand proppants. The Company has six production plants in: New Iberia, Louisiana; Eufaula, Alabama; McIntyre, Georgia; Toomsboro, Georgia; Luoyang, China; and Kopeysk, Russia. The Company predominantly markets its proppant products through pumping service companies that perform hydraulic fracturing for oil and gas companies. Finished goods inventories are stored at the plant sites and various domestic and international remote distribution facilities. The Company also provides the industry’s most popular fracture simulation software FracPro^®, as well as fracture design and consulting services. In addition, the Company provides a broad range of technologies for spill prevention, containment and countermeasures, along with geotechnical monitoring.

Principles of Consolidation

The consolidated financial statements include the accounts of CARBO Ceramics Inc. and its operating subsidiaries. All significant intercompany transactions have been eliminated.

Concentration of Credit Risk, Accounts Receivable and Other Receivables

The Company performs periodic credit evaluations of its customers’ financial condition and generally does not require collateral. Receivables are generally due within 30 days. The majority of the Company’s receivables are from customers in the petroleum pressure pumping industry. The Company establishes an allowance for doubtful accounts based on its assessment of collectability risk and periodically evaluates the balance in the allowance based on a review of trade accounts receivable. Trade accounts receivable are periodically reviewed for collectability based on customers’ past credit history and current financial condition, and the allowance is adjusted if necessary. Credit losses historically have been insignificant. The allowance for doubtful accounts at December 31, 2011 and 2010 was $1,933 and $1,711, respectively. Other receivables were $1,968 and $1,946 as of December 31, 2011 and 2010, respectively, of which 2011 related mainly to miscellaneous receivables in the United States and China and value added tax receivables in Russia and China. Other receivables for 2010 related mainly to miscellaneous receivables in China and value added tax receivables in Russia.

Cash Equivalents

The Company considers all highly liquid investments with a maturity of three months or less when purchased to be cash equivalents. The carrying amounts reported in the balance sheet for cash equivalents approximate fair value.

Inventories

Inventories are stated at the lower of cost (weighted average) or market. Finished goods inventories include costs of materials, plant labor and overhead incurred in the production of the Company’s products and costs to transfer finished goods to distribution centers.

F-8

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

Property, Plant and Equipment

Property, plant and equipment are stated at cost. Repair and maintenance costs are expensed as incurred. Depreciation is computed on the straight-line method for financial reporting purposes using the following estimated useful lives:

Buildings and improvements	15 to 30 years
Machinery and equipment	3 to 30 years
Land-use rights	30 years

The Company holds approximately 4,000 acres of land and leasehold interests containing kaolin reserves near its plants in Georgia and Alabama. The Company also holds approximately 490 acres of land and leasehold interests near its resin-coating facility currently under construction in Marshfield, Wisconsin containing sand reserves for use as raw material in the production of its resin-coated sand products. The capitalized costs of land and mineral rights as well as costs incurred to develop such property are amortized using the units-of-production method based on estimated total tons of these reserves.

Impairment of Long-Lived Assets and Intangible Assets

Long-lived assets to be held and used and intangible assets that are subject to amortization are reviewed for impairment whenever events or circumstances indicate their carrying amounts might not be recoverable. Recoverability is assessed by comparing the undiscounted expected future cash flows from the assets with their carrying amount. If the carrying amount exceeds the sum of the undiscounted future cash flows an impairment loss is recorded. The impairment loss is measured by comparing the fair value of the assets with their carrying amounts. Intangible assets that are not subject to amortization are tested for impairment at least annually by comparing their fair value with the carrying amount and recording an impairment loss for any excess of carrying amount over fair value. Fair values are generally determined based on discounted expected future cash flows or appraised values, as appropriate. Long-lived assets that are held for disposal are reported at the lower of the assets’ carrying amount or fair value less costs related to the assets’ disposition. During 2011, 2010 and 2009, the Company recognized losses of $1,548, $1,449 and $156, respectively, on disposal or impairment of various assets. The loss in 2011 consisted of an impairment of goodwill related to the Company’s geotechnical monitoring business, a write-down of a 6% interest in an investment accounted for under the cost method as a result of the sale of the business by majority shareholders and certain equipment disposals. The loss in 2010 consisted of an impairment of goodwill related to the Company’s geotechnical monitoring business and equipment disposals, while the loss in 2009 is mainly related to equipment disposals.

Capitalized Software

The Company capitalizes certain software costs, after technological feasibility has been established, which are amortized utilizing the straight-line method over the economic lives of the related products, not to exceed five years.

Goodwill

Goodwill represents the excess of the cost of companies acquired over the fair value of their net assets at the date of acquisition. Realization of goodwill is assessed at least annually by management based on the fair value

F-9

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

of the respective reporting unit. As a result of changes in business conditions in the geotechnical monitoring business during 2011 and 2010, the Company recorded an impairment charge of $889 and $470, respectively, on goodwill associated with that reporting unit. The latest impairment review indicated goodwill related to other reporting units was not impaired.

Revenue Recognition

Revenue from proppant sales is recognized when title passes to the customer, generally upon delivery. Revenue from consulting and geotechnical services is recognized at the time service is performed. Revenue from the sale of fracture simulation software is recognized when title passes to the customer at time of shipment. Revenue from the sale of spill prevention services is recognized at the time service is performed. Revenue from the sale of containment goods is recognized at the time goods are delivered.

Shipping and Handling Costs

Shipping and handling costs are classified as cost of sales. Shipping costs consist of transportation costs to deliver products to customers. Handling costs include labor and overhead to maintain finished goods inventory and operate distribution facilities.

Cost of Start-Up Activities

Start-up activities, including organization costs, are expensed as incurred. Start-up costs for 2011 primarily related to the start-up of the fourth production line at the Company’s Toomsboro, Georgia facility. Start-up costs for 2010 related to the start-up of the first resin-coating line within the Company’s New Iberia, Louisiana facility and the start-up of the third production line at the Company’s Toomsboro, Georgia facility. Start-up costs include organizational and administrative costs associated with the facilities as well as labor, materials, and utilities to bring installed equipment to operating condition.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

Research and Development Costs

Research and development costs are charged to operations when incurred and are included in Selling, General and Administrative expenses. The amounts incurred in 2011, 2010 and 2009 were $7,335, $5,279 and $2,902, respectively.

Foreign Subsidiaries

Financial statements of the Company’s foreign subsidiaries are translated using current exchange rates for assets and liabilities; average exchange rates for the period for revenues, expenses, gains and losses; and historical exchange rates for equity accounts. Resulting translation adjustments are included in, and the only component of, accumulated other comprehensive loss as a separate component of shareholders’ equity.

F-10

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

New Accounting Pronouncements

In June 2011, the FASB issued ASU No. 2011-05, “Comprehensive Income (ASC Topic 220): Presentation of Comprehensive Income,” (“ASU 2011-05”) which amends current comprehensive income guidance. This accounting update eliminates the option to present the components of other comprehensive income as part of the statement of shareholders’ equity. Instead, the Company must report comprehensive income in either a single continuous statement of comprehensive income which contains two sections, net income and other comprehensive income, or in two separate but consecutive statements. ASU 2011-05 will be effective for public companies during the interim and annual periods beginning after December 15, 2011 with early adoption permitted. The adoption of ASU 2011-05 will not have an impact on the Company’s consolidated financial position, results of operations or cash flows as it only requires a change in the format of the current presentation.

In September 2011, the FASB issued ASU No. 2011-08,“Intangibles — Goodwill and Other (ASC Topic 350),”(“ASU 2011-08”). This accounting update allows entities to perform a qualitative assessment on goodwill impairment to determine whether it is more likely than not (defined as having a likelihood of more than 50 percent) that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step goodwill impairment test. This guidance is effective for goodwill impairment test performed in interim and annual periods for fiscal years beginning after December 15, 2011. The Company does not expect the adoption of this guidance to have a material impact on its consolidated financial statements.

2. Acquisition of Business

On October 2, 2009, a wholly-owned subsidiary of the Company purchased substantially all of the assets of BBL Falcon Industries, Ltd. (“Falcon”), a supplier of spill prevention and containment systems for the oil and gas industry. The acquisition was made for the purpose of expanding the Company’s product and service offerings to its existing client base. Falcon uses proprietary technology to provide products that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials. The acquisition was accounted for using the purchase method of accounting under ASC Topic 805, “Business Combinations”. The aggregate purchase price of the acquisition was $22,807 in cash. Acquisition costs incurred during 2009 of $608 are reported in Selling, General and Administrative Expenses. The operating results of the acquired company have been included in the consolidated financial statements from the date of acquisition. Goodwill of $8,664 arising in the transaction is deductible for income tax purposes.

Unaudited pro forma revenue, earnings and earnings per share were not materially different from reported results and as such are not presented herein.

F-11

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

3. Intangible and Other Assets

Following is a summary of intangible assets as of December 31:

			2011				2010
	Weighted Average Life		Gross Amount		Accumulated Amortization		Gross Amount		Accumulated Amortization
Intangibles:
Patents and licenses, software and hardware designs		6 years	$	4,225	$	1,661	$	3,562	$	1,144
Developed technology		10 years		2,782		626		2,782		348
Customer relationships and non-compete		9 years		2,838		756		2,838		420
Trademark		Indefinite		833		—		833		—
			$	10,678	$	3,043	$	10,015	$	1,912

Amortization expense for 2011, 2010 and 2009 was $1,131, $1,043 and $560, respectively. Estimated amortization expense for each of the ensuing years through December 31, 2016 is $1,203, $1,136, $1,124, $1,019 and $820, respectively.

Following is a summary of other assets as of December 31:

	2011		2010
Other assets:
Bauxite raw materials:
Inventories	$	23,842	$	—
Prepayments		1,174		1,163
Other assets		826		1,114
	$	25,842	$	2,277

Bauxite raw materials are used in the production of heavyweight ceramic products. As of December 31, 2011 and 2010, the Company has classified as long-term assets those bauxite raw materials inventories and prepayments in the United States that are not expected to be consumed in production during the upcoming twelve month period.

4. Bank Borrowings

The Company has an unsecured revolving credit agreement with a bank. Under the terms of the agreement, dated January 29, 2010, the Company can borrow up to $10,000. The Company has the option of choosing either the bank’s fluctuating Base Rate or LIBOR Fixed Rate, plus an Applicable Margin, all as defined in the credit agreement. The terms of the credit agreement provide for certain affirmative and negative covenants and require the Company to maintain certain financial ratios. Commitment fees are payable quarterly at the annual rate of 0.50% of the unused line of credit. Commitment fees for 2011 and 2010 were $51 and $47, respectively. Under the terms of the expired agreement, commitment fees payable quarterly at the annual rate of 0.375% of the unused line of credit were $38 in 2009.

F-12

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

5. Leases

The Company leases certain property, plant and equipment under operating leases, primarily consisting of railroad equipment leases. Minimum future rental payments due under non-cancelable operating leases with remaining terms in excess of one year as of December 31, 2011 are as follows:

2012	$	17,010
2013		17,134
2014		15,429
2015		14,350
2016		13,116
Thereafter		39,676
Total	$	116,715

Leases of railroad equipment generally provide for renewal options at their fair rental value at the time of renewal. In the normal course of business, operating leases for railroad equipment are generally renewed or replaced by other leases. Rent expense for all operating leases was $11,590 in 2011, $9,054 in 2010, and $7,693 in 2009.

6. Income Taxes

Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of the Company’s deferred tax assets and liabilities as of December 31 are as follows:

	2011		2010
Deferred tax assets:
Employee benefits	$	1,501	$	1,590
Inventories		5,797		3,834
Goodwill		2,323		2,805
Other		4,747		2,652
Total deferred tax assets		14,368		10,881
Deferred tax liabilities:
Depreciation		35,402		28,274
Foreign earnings		644		1,509
Total deferred tax liabilities		36,046		29,783
Net deferred tax liabilities	$	21,678	$	18,902

Foreign earnings in the table above are presented net of foreign tax credits of $3,868 and $2,494 as of December 31, 2011 and 2010, respectively, which are expected to be utilized upon repatriation of the foreign earnings.

F-13

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

Significant components of the provision for income taxes for the years ended December 31 are as follows:

	2011		2010		2009
Current:
Federal	$	57,429	$	34,061	$	23,712
State		4,288		3,303		2,080
Foreign		1,374		607		619
Total current		63,091		37,971		26,411
Deferred		4,223		2,662		573
	$	67,314	$	40,633	$	26,984

In China, the Company benefited from a full income tax holiday from the inception of that business through 2004 and a partial tax holiday from 2005 through 2008. However, provision has been made for deferred U.S. income taxes on all foreign earnings based on the Company’s intent to repatriate foreign earnings. The reconciliation of income taxes computed at the U.S. statutory tax rate to the Company’s income tax expense for the years ended December 31 is as follows:

	2011						2010						2009
	Amount			Percent			Amount			Percent			Amount			Percent
U.S. statutory rate	$	69,107			35.0	%	$	41,772			35.0	%	$	27,928			35.0	%
State income taxes, net of federal tax benefit		3,103			1.6			2,148			1.8			1,351			1.7
Mining depletion		(1,162	)		(0.6	)		(1,227	)		(1.0	)		(898	)		(1.1	)
Section 199 Manufacturing Benefit, ETI Exclusion and other		(3,734	)		(1.9	)		(2,060	)		(1.8	)		(1,397	)		(1.8	)
	$	67,314			34.1	%	$	40,633			34.0	%	$	26,984			33.8	%

The Company had a recorded reserve of $227 associated with uncertain tax positions as of December 31, 2011 and there were no significant changes to the recorded reserve during 2011. If these uncertain tax positions are recognized, substantially all of this amount would impact the effective tax rate. Related accrued interest and penalties are recorded in income tax expense and are not material.

The Company files its tax returns as prescribed by the tax laws of the jurisdictions in which it operates, the most significant of which are U.S. federal and certain state jurisdictions. The Company does not currently have material income tax exposure in foreign jurisdictions due to tax holidays, recent commencement of operations or immaterial operations. The 2005 through 2010 tax years are still subject to examination. Various U.S. state jurisdiction tax years remain open to examination as well though the Company believes assessments, if any, would be immaterial to its consolidated financial statements.

7. Shareholders’ Equity

Common Stock

Holders of Common Stock are entitled to one vote per share on all matters to be voted on by shareholders and do not have cumulative voting rights. Subject to preferences of any Preferred Stock, the holders of Common

F-14

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

Stock are entitled to receive ratably such dividends, if any, as may be declared from time to time by the Board of Directors out of funds legally available for that purpose. In the event of liquidation, dissolution or winding up of the Company, holders of Common Stock are entitled to share ratably in all assets remaining after payment of liabilities, subject to prior distribution rights of any Preferred Stock then outstanding. The Common Stock has no preemptive or conversion rights or other subscription rights. There are no redemption or sinking fund provisions applicable to the Common Stock. All outstanding shares of Common Stock are fully paid and non-assessable.

On January 17, 2012, the Board of Directors declared a cash dividend of $0.24 per share. The dividend is payable on February 15, 2012 to shareholders of record on February 1, 2012.

Preferred Stock

The Company’s charter authorizes 5,000 shares of Preferred Stock. The Board of Directors has the authority to issue Preferred Stock in one or more series and to fix the rights, preferences, privileges and restrictions thereof, including dividend rights, conversion rights, voting rights, terms of redemption, redemption prices, liquidation preferences and the number of shares constituting any series or the designation of such series, without further vote or action by the Company’s shareholders. In connection with adoption of a shareholder rights plan on February 13, 2002, the Company created the Series A Preferred Stock and authorized 2,000 shares of the Series A Preferred Stock.

Shareholder Rights Plan

On February 13, 2002, the Company adopted a shareholder rights plan and declared a dividend of one right for each outstanding share of Common Stock to shareholders of record on February 25, 2002. With certain exceptions, the rights become exercisable if a tender offer for the Company is announced or any person or group acquires beneficial ownership of at least 15 percent of the Company’s Common Stock. If exercisable, each right entitles the holder to purchase one fifteen-thousandth of a share of Series A Preferred Stock at an exercise price of $133 and, if any person or group acquires beneficial ownership of at least 15 percent of the Company’s Common Stock, to acquire a number of shares of Common Stock having a market value of two times the $133 exercise price. The Company may redeem the rights for $0.01 per right at any time before any person or group acquires beneficial ownership of at least 15 percent of the Common Stock. The rights expired on February 13, 2012.

8. Stock Based Compensation

The CARBO Ceramics Inc. Omnibus Incentive Plan (the “Omnibus Incentive Plan”), which replaced the previously expired restricted stock and stock option plans, provides for granting of cash-based awards, stock options (both non-qualified and incentive) and other equity-based awards (including stock appreciation rights, phantom stock, restricted stock, restricted stock units, performance shares, deferred share units or share-denominated performance units) to employees and non-employee directors. The amount paid under the Omnibus Incentive Plan to any single participant in any calendar year with respect to any cash-based award shall not exceed $2,000. Awards may be granted with respect to a number of shares of the Company’s Common Stock that in the aggregate does not exceed 750,000 shares prior to the fifth anniversary of its effective date, plus (i) the number of shares that are forfeited, cancelled or returned, and (ii) the number of shares that are withheld from the participants to satisfy an option exercise price or minimum statutory tax withholding obligations. No more than 50,000 shares may be granted to any single participant in any calendar year. Equity-based awards may be subject

F-15

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

to performance-based and/or service-based conditions. With respect to stock options and stock appreciation rights granted, the exercise price shall not be less than the market value of the underlying Common Stock on the date of grant. The maximum term of an option is ten years. Restricted stock awards granted generally vest (i.e., transfer and forfeiture restrictions on these shares are lifted) proportionately on each of the first three anniversaries of the grant date, but subject to certain limitations, awards may specify other vesting periods. As of December 31, 2011, 616,647 shares were available for issuance under the Omnibus Incentive Plan. Although the Company’s previous restricted stock and stock option plans have expired, outstanding options and unvested shares granted under these plans remain outstanding in accordance with their terms.

The Company also had a Director Deferred Fee Plan (the “Plan”), which terminated on January 19, 2010, that permitted non-employee directors of the Company to defer receipt of cash compensation for service as a director and to receive those fees in the form of the Company’s Common Stock on a specified later date that was on or after the director’s retirement from the Board of Directors. In January 2011, a total of 4,058 shares were issued in full payment of $171 of deferred fees remaining under the Plan to electing directors.

As of December 31, 2011, all compensation cost related to stock options granted under the expired stock option plans has been recognized. During 2011, a total of 3,475 options, with a weighted-average exercise price of $21.83 per share, were exercised. The weighted-average remaining contractual term of the 2,425 options outstanding at December 31, 2011 was less than 12 months. The total intrinsic value of options exercised during the years ended December 31, 2011, 2010 and 2009 was $346, $250, and $944, respectively.

A summary of restricted stock activity and related information for the year ended December 31, 2011 is presented below:

	Shares			Weighted- Average Grant-Date Fair Value
Nonvested at January 1, 2011		134,276		$	51.20
Granted		54,740		$	104.07
Vested		(57,636	)	$	47.05
Forfeited		(2,298	)	$	77.95
Nonvested at December 31, 2011		129,082		$	75.00

As of December 31, 2011, there was $4,760 of total unrecognized compensation cost, net of estimated forfeitures, related to restricted shares granted under the restricted stock plans. That cost is expected to be recognized over a weighted-average period of 1.2 years. The weighted-average grant date fair value of restricted stock granted during the years ended December 31, 2010 and 2009 was $68.80 and $38.91, respectively. The total fair value of shares vested during the years ended December 31, 2011, 2010 and 2009 was $2,712, $2,141 and $1,978, respectively.

The Company also had an International Long-Term Incentive Plan that provided for granting units of stock appreciation rights (“SARs”) or phantom shares to key international employees. This plan was replaced by the Omnibus Incentive Plan. One-third of the units subject to an award vests and ceases to be forfeitable on each of the first three anniversaries of the grant date. Participants awarded units of SARs have the right to receive an amount, in cash, equal to the excess of the fair market value of a share of Common Stock as of the vesting date, or in some cases on a later exercise date chosen by the participant, over the exercise price. Participants awarded

F-16

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

units of phantom shares are entitled to a lump sum cash payment equal to the fair market value of a share of Common Stock on the vesting date. In no event will Common Stock of the Company be issued under either plan with regard to SARs or phantom shares. As of December 31, 2011, there were 21,565 units of phantom shares granted under the plans, of which 12,487 have vested and 2,844 have been forfeited, with a total value of $769, the unvested portion of which is recorded as a liability within Accrued Payroll and Benefits.

9. Earnings Per Share

ASC Topic 260, “Earnings Per Share”, provides that unvested share-based payment awards that contain non-forfeitable rights to dividends or dividend equivalents (whether paid or unpaid) are participating securities and shall be included in the computation of earnings per share pursuant to the two-class method. The Company’s outstanding non-vested restricted stock awards are participating securities. Accordingly, earnings per common share are computed using the two-class method.

The following table sets forth the computation of basic and diluted earnings per share under the two-class method:

	2011			2010			2009
Numerator for basic and diluted earnings per share:
Net income	$	130,136		$	78,716		$	52,810
Effect of reallocating undistributed earnings of participating securities		(749	)		(485	)		(304	)
Net income available under the two-class method	$	129,387		$	78,231		$	52,506
Denominator:
Denominator for basic earnings per share—weighted-average shares		23,011,087			22,969,360			23,097,105
Effect of dilutive securities:
Employee stock options (See Note 8)		1,332			3,802			8,723
Deferred stock awards (See Note 8)		—			4,034			5,864
Dilutive potential common shares		1,332			7,836			14,587
Denominator for diluted earnings per share—adjusted weighted-average shares		23,012,419			22,977,196			23,111,692
Basic earnings per share	$	5.62		$	3.41		$	2.27
								��
Diluted earnings per share	$	5.62		$	3.40		$	2.27

F-17

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

10. Quarterly Operating Results––(Unaudited)

Quarterly results for the years ended December 31, 2011 and 2010 were as follows:

	Three Months Ended
	March 31		June 30		September 30		December 31
2011
Revenues	$	150,830	$	149,669	$	167,083	$	158,123
Gross profit		62,056		62,118		72,693		64,848
Net income		30,164		29,944		36,911		33,117
Earnings per share:
Basic	$	1.30	$	1.29	$	1.59	$	1.43
Diluted	$	1.30	$	1.29	$	1.59	$	1.43
2010
Revenues	$	123,449	$	111,532	$	118,517	$	119,584
Gross profit		42,565		41,241		44,499		46,366
Net income		18,992		18,734		20,175		20,815
Earnings per share:
Basic	$	0.82	$	0.81	$	0.87	$	0.90
Diluted	$	0.82	$	0.81	$	0.87	$	0.90

Quarterly data may not sum to full year data reported in the Consolidated Financial Statements due to rounding.

11. Sales to Customers

The following schedule presents customers from whom the Company derived 10% or more of total revenues for the years ended December 31:

	Major Customers
	A			B			C
2011		15.0	%		33.3	%		*
2010		15.0	%		37.5	%		*
2009		27.5	%		34.3	%		11.1	%

* Less than 10 percent.

12. Geographic Information

Long-lived assets, consisting of net property, plant and equipment and other long-term assets, as of December 31 in the United States and other countries are as follows:

	2011		2010		2009
Long-lived assets:
United States	$	377,667	$	294,368	$	222,572
International (primarily China and Russia)		40,835		46,391		50,413
Total	$	418,502	$	340,759	$	272,985

F-18

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

Revenues outside the United States accounted for 21%, 23% and 24% of the Company’s revenues for 2011, 2010 and 2009, respectively. Revenues for the years ended December 31 in the United States, Canada and other countries are as follows:

	2011		2010		2009
Revenues:
United States	$	495,777	$	365,346	$	258,453
Canada		34,001		28,926		22,062
Other international		95,927		78,810		61,357
Total	$	625,705	$	473,082	$	341,872

13. Benefit Plans

The Company has defined contribution savings and profit sharing plans pursuant to Section 401(k) of the Internal Revenue Code. Benefit costs recognized as expense under these plans consisted of the following for the years ended December 31:

	2011		2010		2009
Contributions:
Profit sharing	$	2,690	$	1,606	$	1,031
Savings		1,081		847		732
	$	3,771	$	2,453	$	1,763

All contributions to the plans are 100% participant directed. Participants are allowed to invest up to 20% of contributions in the Company’s Common Stock.

14. Commitments

In 2003, the Company entered into a new agreement with an existing supplier to purchase kaolin for its Eufaula, Alabama, plant at a specified contract price. The term of the agreement was seven years commencing January 1, 2004 and required the Company to purchase from the supplier at least 70 percent of the annual kaolin requirements for the Eufaula, Alabama plant at specified contract prices. For the years ended December 31, 2010 and 2009, the Company purchased from the supplier $3,603 and $3,646, respectively, of kaolin under the agreement. This agreement expired December 31, 2010. Effective January 1, 2011, the Company entered into a new agreement with another one of the Company’s existing suppliers. The term of the agreement is three years, with options to extend for an additional six years, and requires the Company to purchase from the supplier at least 70 percent of the annual kaolin requirements for the Eufaula plant at specified contract prices. For the year ended December 31, 2011, the Company purchased from the supplier $3,205 of kaolin under the agreement.

In January 2003, the Company entered into a mining agreement with a contractor to provide kaolin for the Company’s McIntyre plant at specified contract prices, from lands owned or leased by either the Company or the contractor. The term of the agreement, which commenced on January 1, 2003, and remains in effect until such time as all Company-owned minerals have been depleted, requires the Company to accept delivery from the contractor of at least 80 percent of the McIntyre plant’s annual kaolin requirements. For the years ended December 31, 2011, 2010 and 2009, the Company purchased $2,900, $1,687 and $182, respectively, of kaolin under the agreement.

F-19

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

In October 2008, the Company entered into a ten-year agreement, with options to extend for an additional ten years, to purchase a minimum of 40,000 tons of uncalcined bauxite each year during the first three years of the agreement. Thereafter, the minimum required purchase increases to 70,000 tons annually. The bauxite is purchased at specified contract prices. For the years ended December 31, 2011, 2010 and 2009, the Company purchased $1,400, $1,400 and $842, respectively, of bauxite under the agreement.

In 2002, the Company entered into a five-year agreement and a ten-year agreement with two different suppliers to purchase bauxite and hard clays for its China plant at specified contract prices. The five-year agreement, which was automatically renewed for an additional three years, expired in 2010. The ten-year agreement requires the Company to accept delivery from the supplier for at least 80 percent of the plant’s annual requirements. For the years ended December 31, 2011, 2010 and 2009, the Company purchased $2,918, $2,834 and $2,527, respectively, of material under these agreements.

In July 2011, the Company entered into a new agreement with a supplier to provide hydro sized sand for the Company’s Marshfield, Wisconsin plant at a specified contract price. The term of the agreement was five years commencing on July 30, 2011 and required the Company to purchase a minimum of 40,000 tons and 100,000 tons of hydro sized sand during 2011 and 2012, respectively. Effective January 30, 2012, the agreement was amended and requires the Company to purchase a minimum of 150,000 tons of hydro sized sand annually during years 2012 and 2013 and a minimum of 350,000 tons of hydro sized sand in 2014, all at a stated contract price. For the year ended December 31, 2011, the Company purchased $462 of sand under this agreement.

The Company has entered into a lease agreement dated November 1, 2008 with the Development Authority of Wilkinson County (the “Development Authority”) in the State of Georgia. This 2008 agreement supersedes and replaces the prior lease agreement dated November 1, 2003. Pursuant to the 2008 agreement, the Development Authority holds the title to the real and personal property of the Company’s McIntyre and Toomsboro manufacturing facilities and leases the facilities to the Company for an annual rental fee of $50 per year through the year 2022. At any time prior to the scheduled termination of the lease, the Company has the option to terminate the lease and purchase the property for a nominal fee plus the payment of any rent payable through the balance of the lease term. Furthermore, the Company has a security interest in the title held by the Development Authority. The Company has also entered into a Memorandum of Understanding (the “MOU”) with the Development Authority and other local agencies, under which the Company receives tax incentives in exchange for its commitment to invest in the county and increase employment. The Company is required to achieve certain employment levels in order to retain its tax incentives. In the event the Company does not meet the agreed-upon employment targets or the MOU is otherwise terminated, the Company would be subjected to additional property taxes annually. The property subject to the lease agreement is included in Property, Plant and Equipment (net book value of $258,346 at December 31, 2011) in the accompanying consolidated financial statements.

The Company uses natural gas to power its domestic manufacturing plants. From time to time the Company enters into contracts to purchase a portion of the anticipated natural gas requirements at specified prices. As of December 31, 2011, the Company had natural gas contracts totaling $26,003, $25,087, $16,264, $16,265 and $7,944 for years ended 2012, 2013, 2014, 2015 and 2016, respectively.

15. Employment Agreements

The Company has an employment agreement through December 31, 2012 with its President and Chief Executive Officer. The agreement provides for an annual base salary and incentive bonus. If the President and

F-20

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

Chief Executive Officer is terminated early without cause, the Company will be obligated to pay two years base salary and a prorated incentive bonus. Under the agreement, the timing of the payment of severance obligations to the President in the event of the termination of his employment under certain circumstances has been conformed so that a portion of such obligations will be payable in a lump sum, with the remainder of the obligations to be paid over an 18 month period. The agreement also contains a two-year non-competition covenant that would become effective upon termination for any reason. The employment agreement extends automatically for successive one-year periods without prior written notice.

16. Foreign Currencies

As of December 31, 2011, the Company’s net investment that is subject to foreign currency fluctuations totaled $87,239 and the Company has recorded a cumulative foreign currency translation loss of $3,865, net of deferred income tax benefit. This cumulative translation loss is included in Accumulated Other Comprehensive Loss.

17. Legal Proceedings and Regulatory Matters

The Company is subject to legal proceedings, claims and litigation arising in the ordinary course of business. While the outcome of these matters is currently not determinable, management does not expect that the ultimate costs to resolve these matters will have a material adverse effect on the Company’s consolidated financial position, results of operations, or cash flows.

On August 4, 2011, CARBO Ceramics Inc. was named as a defendant in a civil lawsuit filed by C-E Minerals, Inc. (“C-E”) in the United States District Court for the Northern District of Georgia, Atlanta Division. C-E has alleged that a mutual non-competition provision contained in a Raw Material Requirements Agreement between C-E and CARBO Ceramics Inc., dated June 1, 2003, is invalid under federal antitrust law and applicable state law. The covenant generally prohibits C-E from engaging in the manufacture or sale of ceramic proppant, and prohibits the Company from engaging in the business of selling calcined clay through the end of 2013 (three years after the termination date of the agreement). C-E is seeking a declaratory judgment that the covenant is invalid, along with a preliminary and permanent injunction that would prevent the enforcement of the covenant. C-E is also seeking to recover its attorney’s fees from the Company. C-E subsequently amended its complaint on September 15, 2011 to further allege that the Company has certain monopoly power and has asked for declaratory and injunctive relief that would prevent the Company from enforcing certain damages provisions in its sales contracts. The Company believes that C-E��s allegations are without merit and is vigorously defending the lawsuit. In addition, the Company has filed a counter-claim against C-E seeking injunctive relief and damages in connection with sales of ceramic proppant by C-E and its affiliates. C-E has filed a motion for a preliminary injunction that would prohibit the enforcement of the non-competition provision. The Court held a hearing on this motion on February 15, 2012 and a decision is pending.

On February 9, 2012, the Company and two of its officers, Gary A. Kolstad and Ernesto Bautista III, were named as defendants in a purported class-action lawsuit filed in the United States District Court for the Southern District of New York. The suit alleged violations of the Federal securities laws arising from statements concerning the Company’s business operations and business prospects that were made between October 27, 2011 and January 26, 2012, and requests unspecified damages and costs. While the lawsuit is in its preliminary stages, the Company does not believe it has merit, and plans to vigorously contest and defend against it.

F-21

CARBO CERAMICS INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

($ in thousands, except per share data)

18. Subsequent Events

In January 2012, the Company awarded 54,572 shares of restricted stock to certain employees. The fair value of the stock award on the date of grant totaled $6,528, which will be recognized as expense, net of estimated forfeitures, on a straight-line basis over the three-year vesting period.

In January 2012, the Company awarded 2,755 units of phantom shares to certain key international employees. The fair value of the stock award on the date of grant totaled $330.

Subsequent to December 31, 2011, the Company drew down $10,000 on its existing revolving credit facility to fund a common share repurchase along with other commitments. As of February 29, 2012, the balance outstanding on the Company’s revolving credit facility was $10,000.

F-22

Exhibit Index

3.1	Amended and Restated Certificate of Incorporation of CARBO Ceramics Inc. (incorporated by reference to Exhibit 3.1 of the Registrant’s Form S-1 Registration Statement No. 333-1884 filed July 19,1996)
3.2	Second Amended and Restated By-Laws of CARBO Ceramics Inc. (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K Current Report filed March 20, 2009)
4.1	Form of Common Stock Certificate of CARBO Ceramics Inc. (incorporated by reference to Exhibit 4.1 of the Registrant’s Form S-1 Registration Statement No. 333-1884 filed July 19, 1996)
4.2	Certificate of Designations of Series A Preferred Stock (incorporated by reference to Exhibit 2 of the Registrant’s Form 8-A12B Registration Statement No. 001-15903 filed February 25, 2002)
10.1	Raw Material Requirements Agreement dated as of June 1, 2003, between CARBO Ceramics Inc. and C-E Minerals Inc. (incorporated by reference to exhibit 10.4 of the registrant’s Form 10-K Annual Report for the year ended December 31, 2003)
10.2	Mining Agreement dated as of January 1, 2003 between CARBO Ceramics Inc. and Arcilla Mining & Land Co. (incorporated by reference to Exhibit 10.8 of the Registrant’s Form 10-K Annual Report for the year ended December 31, 2002)
10.3	Addendum to Mining Agreement dated as of November 10, 2009 between CARBO Ceramics Inc. and Arcilla Mining & Land Co. (incorporated by reference to Exhibit 10.3 of the Registrant’s Form 10-K Annual Report for the year ended December 31, 2010)
*10.4	2004 CARBO Ceramics Inc. Long-Term Incentive Plan (incorporated by reference to Exhibit 99.2 of the Registrant’s Form 8-K Current Report filed January 24, 2005)
*10.5	Amendment No. 1 to the 2004 CARBO Ceramics Inc. Long-Term Incentive Plan (incorporated by reference to Annex A of the Registrant’s Definitive Proxy Statement for the 2006 Annual Meeting of Stockholders filed March 20, 2006)
*10.6	Form of Non-Employee Director Restricted Stock Award Agreement under the 2004 CARBO Ceramics Inc. Long-Term Incentive Plan (incorporated by reference to Exhibit 10.2 of the Registrant’s Form 8-K Current Report filed April 24, 2006)
*10.7	Form of Officer Restricted Stock Award Agreement under the 2004 CARBO Ceramics Inc. Long-Term Incentive Plan (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 10-Q Quarterly Report filed for the period ending June 30, 2009)
*10.8	Second Amended and Restated Employment Agreement dated effective as of January 1, 2012, by and between CARBO Ceramics Inc. and Gary A. Kolstad
10.9	Acquisition Agreement dated as of August 28, 2008 between Pinnacle Technologies, Inc., CARBO Ceramics Inc. and Halliburton Energy Services, Inc. (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K Current Report filed on September 4, 2008)
10.10	Proppant Supply Agreement dated as of August 28, 2008 between CARBO Ceramics Inc. and Halliburton Energy Services, Inc. (incorporated by reference to Exhibit 10.3 of the Registrant’s Form 10-Q Quarterly Report for the quarter ended September 30, 2008)
10.11	Amendment No. 1 to Proppant Supply Agreement dated as of February 28, 2011 between CARBO Ceramics Inc. and Halliburton Energy Services, Inc. (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 10-Q Quarterly Report for the quarter ended March 31, 2011)
10.12	Side Letter to Proppant Supply Agreement dated as of August 26, 2011 between CARBO Ceramics Inc. and Halliburton Energy Services, Inc. (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 10-Q Quarterly Report for the quarter ended September 30, 2011)

10.13	Lease Agreement dated as of November 1, 2008 between the Development Authority of Wilkinson County and CARBO Ceramics Inc. (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K Current Report filed December 30, 2008)
10.14	Option Agreement dated as of November 1, 2008 between the Development Authority of Wilkinson County and CARBO Ceramics Inc. (incorporated by reference to Exhibit 10.2 of the Registrant’s Form 8-K Current Report filed December 30, 2008)
*10.15	CARBO Ceramics Inc. Omnibus Incentive Plan (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K Current Report filed May 21, 2009)
*10.16	Form of Officer Restricted Stock Award Agreement for Omnibus Incentive Plan (incorporated by reference to Exhibit 10.20 of the Registrant’s Form 10-K Annual Report for the year ended December 31, 2010)
*10.17	Form of Non-Employee Director Restricted Stock Award Agreement for Omnibus Incentive Plan (incorporated by reference to Exhibit 10.21 of the Registrant’s Form 10-K Annual Report for the year ended December 31, 2010)
*10.18	Form of Performance-Based Cash Award Agreement for Omnibus Incentive Plan (incorporated by reference to Exhibit 10.4 of the Registrant’s Form 8-K Current Report filed May 21, 2009)
*10.19	Description of Annual Non-Employee Director Stock Grants (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 10-Q Quarterly Report for the quarter ended June 30, 2010)
*10.20	Description of Modification to Annual Non-Employee Director Stock Grants (incorporated by reference to Exhibit 10.2 of the Registrant’s Form 10-Q Quarterly Report for the quarter ended March 31, 2011)
*10.21	CARBO Ceramics Inc. Omnibus Incentive Plan Annual Incentive Arrangement (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K Current Report filed January 21, 2010)
10.22	Office Lease dated as of January 20, 2009 between I-10 EC Corridor #2 Limited Partnership and CARBO Ceramics Inc. (incorporated by reference to Exhibit 10.27 of the Registrant’s Form 10-K Annual Report for the year ended December 31, 2009)
10.23	First Amendment to Lease dated as of January 15, 2010 between I-10 EC Corridor #2 Limited Partnership and CARBO Ceramics Inc. (incorporated by reference to Exhibit 10.28 of the Registrant’s Form 10-K Annual Report for the year ended December 31, 2009)
10.24	Credit Agreement, dated as of January 29, 2010, among CARBO Ceramics Inc., as borrower, Wells Fargo Bank, National Association, as administrative agent, issuing lender and swing line lender, and the lenders named therein (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K Current Report filed February 4, 2010).
21	Subsidiaries
23	Consent of Independent Registered Public Accounting Firm
31.1	Rule 13a-14(a)/15d-14(a) Certification by Gary A. Kolstad
31.2	Rule 13a-14(a)/15d-14(a) Certification by Ernesto Bautista III
32	Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
95	Mine Safety Disclosure
101	The following financial information from the Company’s Annual Report on Form 10-K for the year ended December 31, 2011, formatted in XBRL: (i) Consolidated Balance Sheets; (ii) Consolidated Statements of Income; (iii) Consolidated Statements of Shareholders’ Equity; (iv) Consolidated Statements of Cash Flows; and (v) Notes to the Consolidated Financial Statements.

* Management contract or compensatory plan or arrangement filed as an exhibit pursuant to Item 15(b) of the requirements for an Annual Report on Form 10-K.