Innovex International 10Q 2010 Q2 Quarterly report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM 10-Q

(MARK ONE)

x	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

FOR THE QUARTERLY PERIOD ENDED JUNE 30, 2010

¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 001-13439

DRIL-QUIP, INC.

(Exact name of registrant as specified in its charter)

DELAWARE

74-2162088

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer Identification No.)

13550 HEMPSTEAD HIGHWAY

HOUSTON, TEXAS

77040

(Address of principal executive offices)

(Zip Code)

(713) 939-7711

(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of regulations S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ¨ No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer x Accelerated filer ¨ Non-accelerated filer ¨ Smaller reporting company ¨

(Do not check if a smaller

reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2). Yes ¨ No x

As of August 4, 2010, the number of shares outstanding of the registrant’s common stock, par value $.01 per share, was 39,822,711.

PART I—FINANCIAL INFORMATION

Item 1.

FINANCIAL STATEMENTS

DRIL-QUIP, INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

(UNAUDITED)


	December 31, 2009			June 30, 2010
	(In thousands)
ASSETS
Current assets:
Cash and cash equivalents	$	197,792		$	225,903
Trade receivables, net		130,816			137,480
Inventories, net		251,357			239,957
Deferred income taxes		24,542			22,956
Prepaids and other current assets		12,849			8,710

Total current assets		617,356			635,006
Property, plant and equipment, net		194,703			202,851
Other assets		5,187			10,000

Total assets	$	817,246		$	847,857

LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable	$	24,828		$	28,523
Current maturities of long-term debt		723			570
Accrued income taxes		8,514			5,159
Customer prepayments		47,214			21,873
Accrued compensation		10,751			10,314
Other accrued liabilities		12,595			19,744

Total current liabilities		104,625			86,183
Long-term debt		316			70
Deferred income taxes		7,220			7,422

Total liabilities		112,161			93,675

Commitments and contingencies
Stockholders’ equity:
Preferred stock, 10,000,000 shares authorized at $0.01 par value (none issued)		—			—
Common stock:
50,000,000 shares authorized at $0.01 par value, 39,658,524 and 39,822,336 shares issued and outstanding at December 31, 2009 and June 30, 2010		396			398
Additional paid-in capital		129,528			136,882
Retained earnings		583,287			636,982
Foreign currency translation adjustment		(8,126	)		(20,080	)

Total stockholders’ equity		705,085			754,182

Total liabilities and stockholders’ equity	$	817,246		$	847,857

The accompanying notes are an integral part of these statements.

DRIL-QUIP, INC.

CONDENSED CONSOLIDATED STATEMENTS OF INCOME

(UNAUDITED)


	Three months ended June 30,						Six months ended June 30,
	2009			2010			2009			2010
	(In thousands, except per share data)
Revenues:
Products	$	113,400		$	122,188		$	218,536		$	244,021
Services		19,786			19,812			42,172			40,512

Total revenues		133,186			142,000			260,708			284,533
Cost and expenses:
Cost of sales:
Products		65,699			66,539			125,651			135,931
Services		11,708			13,010			23,773			25,433

Total cost of sales		77,407			79,549			149,424			161,364
Selling, general and administrative		12,897			16,077			27,437			29,510
Engineering and product development		6,571			7,051			12,876			13,837
Special item		—			—			—			5,901

		96,875			102,677			189,737			210,612

Operating income		36,311			39,323			70,971			73,921
Interest income		132			69			344			130
Interest expense		(29	)		(11	)		(77	)		(38	)

Income before income taxes		36,414			39,381			71,238			74,013
Income tax provision		9,707			11,383			19,860			20,318

Net income	$	26,707		$	27,998		$	51,378		$	53,695

Earnings per common share:
Basic	$	0.68		$	0.70		$	1.32		$	1.35

Diluted	$	0.68		$	0.70		$	1.31		$	1.34

Weighted average common shares outstanding:
Basic		39,026			39,819			39,024			39,774

Diluted		39,433			40,023			39,363			39,994

The accompanying notes are an integral part of these statements.

DRIL-QUIP, INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(UNAUDITED)


	Six months ended June 30,
	2009			2010
	(In thousands)
Operating activities
Net income	$	51,378		$	53,695
Adjustments to reconcile net income to net cash provided by (used in) operating activities:
Depreciation and amortization		8,664			10,080
Stock-based compensation expense		1,909			2,395
Gain on sale of equipment		(132	)		(122	)
Deferred income taxes		(2,132	)		1,711
Changes in operating assets and liabilities:
Trade receivables, net		20,660			(10,653	)
Inventories, net		(26,608	)		4,317
Prepaids and other assets		289			(1,072	)
Excess tax benefits of stock option exercises		(64	)		(1,110	)
Trade accounts payable and accrued expenses		(9,799	)		(15,501	)

Net cash provided by operating activities		44,165			43,740
Investing activities
Purchase of property, plant and equipment		(22,883	)		(21,980	)
Proceeds from sale of equipment		915			1,078

Net cash used in investing activities		(21,968	)		(20,902	)
Financing activities
Principal payments on long-term debt		(326	)		(337	)
Proceeds from exercise of stock options		55			4,226
Excess tax benefits of stock option exercises		64			1,110

Net cash provided by (used in) financing activities		(207	)		4,999
Effect of exchange rate changes on cash activities		(1,954	)		274

Increase in cash and cash equivalents		20,036			28,111
Cash and cash equivalents at beginning of period		95,952			197,792

Cash and cash equivalents at end of period	$	115,988		$	225,903

The accompanying notes are an integral part of these statements.

DRIL-QUIP, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

1.	Organization and Principles of Consolidation

Dril-Quip, Inc., a Delaware corporation (the “Company” or “Dril-Quip”), designs, manufactures, sells and services highly engineered offshore drilling and production equipment that is well suited for use in deepwater, harsh environment and severe service applications. The Company’s principal products consist of subsea and surface wellheads, subsea and surface production trees, subsea control systems and manifolds, mudline hanger systems, specialty connectors and associated pipe, drilling and production riser systems, liner hangers, wellhead connectors and diverters. Dril-Quip’s products are used by major integrated, large independent and foreign national oil and gas companies in offshore areas throughout the world. Dril-Quip also provides technical advisory assistance on an as-requested basis during installation of its products, as well as rework and reconditioning services for customer-owned Dril-Quip products. In addition, Dril-Quip’s customers may rent or purchase running tools from the Company for use in the installation and retrieval of the Company’s products.

The Company’s operations are organized into three geographic segments—Western Hemisphere (including North and South America; headquartered in Houston, Texas), Eastern Hemisphere (including Europe and Africa; headquartered in Aberdeen, Scotland) and Asia-Pacific (including the Pacific Rim, Southeast Asia, Australia, India and the Middle East; headquartered in Singapore). Each of these segments sells similar products and services and the Company has major manufacturing facilities in all three of its headquarter locations as well as Macae, Brazil.

The condensed consolidated financial statements included herein have been prepared by Dril-Quip and are unaudited, except for the balance sheet at December 31, 2009, which has been derived from the audited consolidated financial statements at that date. In the opinion of management, the unaudited condensed consolidated interim financial statements include all normal recurring adjustments necessary for a fair presentation of the financial position as of June 30, 2010, the results of operations for each of the three and six-month periods ended June 30, 2010 and 2009, and the cash flows for each of the six-month periods ended June 30, 2010 and 2009. Although management believes the unaudited interim related disclosures in these condensed consolidated financial statements are adequate to make the information presented not misleading, certain information and footnote disclosures normally included in annual audited consolidated financial statements prepared in accordance with accounting principles generally accepted in the United States of America under guidance from the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification™ (“ASC”) have been condensed or omitted pursuant to the rules and regulations of the Securities and Exchange Commission. The results of operations and the cash flows for the six-month period ended June 30, 2010 are not necessarily indicative of the results to be expected for the full year. The condensed consolidated financial statements included herein should be read in conjunction with the audited consolidated financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2009.

2.	Significant Accounting Policies

Principles of Consolidation

The condensed consolidated financial statements include the accounts of the Company and its subsidiaries, all of which are wholly owned. All material intercompany accounts and transactions have been eliminated.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America under guidance from the ASC requires management to make estimates and assumptions

that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities as of the date of the financial statements and reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Some of the Company’s more significant estimates are those affected by critical accounting policies for revenue recognition, inventories and contingent liabilities as discussed more fully in the Company’s Annual Report on Form 10-K for the year ended December 31, 2009.

Cash and cash equivalents

Short-term investments that have a maturity of three months or less from the date of purchase are classified as cash equivalents. The Company invests excess cash in interest bearing accounts, money market mutual funds and funds which invest in U.S. Treasury obligations and repurchase agreements backed by U.S. Treasury obligations. The Company’s investment objectives continue to be the preservation of capital and the maintenance of liquidity.

Inventories

Inventory costs are determined principally by the use of the first-in, first-out (FIFO) costing method and are stated at the lower of cost or market. Company manufactured inventory is valued principally using standard costs, which are calculated based upon direct costs incurred and overhead allocations. Inventory purchased from third party vendors is principally valued at the weighted average cost. Periodically, obsolescence reviews are performed on slow-moving inventories and reserves are established based on current assessments about future demands and market conditions. The inventory values have been reduced by a reserve for excess and obsolete inventories. Inventory reserves of $24.2 million and $23.4 million were recorded as of December 31, 2009 and June 30, 2010, respectively. If market conditions are less favorable than those projected by management, additional inventory reserves may be required.

Property, Plant and Equipment

Property, plant and equipment are carried at cost, with depreciation provided on a straight-line basis over their estimated useful lives.

Income Taxes

The Company accounts for income taxes using the asset and liability method. Current income taxes are provided on income reported for financial statement purposes, adjusted for transactions that do not enter into the computation of income taxes payable in the same year. Deferred tax assets and liabilities are measured using enacted tax rates for the expected future tax consequences of temporary differences between the carrying amounts and the tax basis of assets and liabilities. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

Revenue Recognition

Product Revenue

The Company earns product revenues from two sources:

•

product revenues recognized under the percentage-of-completion method; and

•

product revenues from the sale of products that do not qualify for the percentage-of-completion method.

Revenues recognized under the percentage-of-completion method

The Company uses the percentage-of-completion method on long-term project contracts pursuant to ASC Topic 605-35, which provides guidance on accounting for the performance of contracts. Long-term project contracts have the following characteristics:

•

The contracts call for products which are designed to customer specifications;

•

The structural designs are unique and require significant engineering and manufacturing efforts generally requiring more than one year in duration;

•

The contracts contain specific terms as to milestones, progress billings and delivery dates; and

•

Product requirements cannot be filled directly from the Company’s standard inventory.

For each project, the Company prepares a detailed analysis of estimated costs, profit margin, completion date and risk factors which include availability of material, production efficiencies and other factors that may impact the project. On a quarterly basis, management reviews the progress of each project, which may result in revisions of previous estimates, including revenue recognition. The Company calculates the percent complete and applies the percentage to determine the revenues earned and the appropriate portion of total estimated costs. Losses, if any, are recorded in full in the period they first become evident. Historically, the Company’s estimates of total costs and costs to complete have approximated actual costs incurred to complete the project.

Under the percentage-of-completion method, billings do not always correlate directly to the revenue recognized. Based upon the terms of the specific contract, billings may be in excess of the revenue recognized, in which case the amounts are included in customer prepayments as a liability on the Condensed Consolidated Balance Sheets. Likewise, revenue recognized may exceed customer billings in which case the amounts are reported in trade receivables. Unbilled revenues are expected to be billed and collected within one year. At December 31, 2009 and June 30, 2010, receivables included $24.8 million and $20.4 million of unbilled receivables, respectively. During the quarter ended June 30, 2010, there were 18 projects representing approximately 22% of the Company’s total revenue and approximately 26% of its product revenues that were accounted for using percentage-of-completion accounting, compared to 15 projects during the second quarter of 2009 which represented 15% of the Company’s total revenues and 18% of its product revenues. For the six months ended June 30, 2010, there were 18 projects which represented 19% of the Company’s total revenues and 22% of its product revenues, compared to 15 projects which represented 18% of the Company’s total revenues and 21% of its product revenues for the six months ended June 30, 2009, all of which were accounted for using percentage-of-completion accounting.

Revenues not recognized under the percentage-of-completion method

Revenues from the sale of inventory products, not accounted for under the percentage-of-completion method, are recorded at the time the manufacturing processes are complete and ownership is transferred to the customer.

Service revenue

The Company earns service revenues from three sources:

•

technical advisory assistance;

•

rental of running tools; and

•

rework and reconditioning of customer-owned Dril-Quip products.

The recognition of service revenue is the same for all products, including those accounted for under the percentage-of-completion method. The Company does not install products for its customers, but it provides technical advisory assistance. At the time of delivery of the product, the customer is not obligated to buy or rent the Company’s running tools and the Company is not obligated to perform any subsequent services relating to

installation. Technical advisory assistance service revenue is recorded at the time the service is rendered. Service revenues associated with the rental of running and installation tools are recorded as earned. Rework and reconditioning service revenues are recorded when the refurbishment process is complete.

The Company normally negotiates contracts for products, including those accounted for under the percentage-of-completion method, and services separately. For all product sales, it is the customer’s decision as to the timing of the product installation as well as whether Dril-Quip running tools will be purchased or rented. Furthermore, the customer is under no obligation to utilize the Company’s technical advisory services. The customer may use a third party or their own personnel.

Foreign Currency

The financial statements of foreign subsidiaries are translated into U.S. dollars at period end exchange rates except for revenues and expenses, which are translated at average monthly rates. Translation adjustments are reflected as a separate component of stockholders’ equity and have no effect on current earnings or cash flows.

Foreign currency exchange transactions are recorded using the exchange rate at the date of the settlement. Exchange gains (losses) are included in selling, general and administrative costs in the Condensed Consolidated Statements of Income.

Fair Value of Financial Instruments

The Company’s financial instruments consist primarily of cash and cash equivalents, receivables, payables, and debt instruments. The carrying values of these financial instruments approximate their respective fair values as they are either short-term in nature or carry interest rates that approximate market rates.

Concentration of Credit Risk

Financial instruments which subject the Company to concentrations of credit risk primarily include trade receivables. The Company grants credit to its customers, which operate primarily in the oil and gas industry. The Company performs periodic credit evaluations of its customers’ financial condition and generally does not require collateral. The Company maintains reserves for potential losses, and such losses have historically been within management’s expectations.

In addition, the Company invests excess cash in interest bearing accounts, money market mutual funds and funds which invest in obligations of the U.S. Treasury and repurchase agreements backed by U.S. Treasury obligations. Changes in the financial markets and interest rates could affect the interest earned on short-term investments.

Comprehensive Income

ASC Topic 220 establishes the standards for the reporting and display of comprehensive income and its components. The standard requires the Company to include unrealized gains or losses on foreign currency translation adjustments in other comprehensive income. Generally, gains are attributed to a weakening U.S. dollar and losses are the result of a strengthening U.S. dollar.

The following table provides comprehensive income for the periods indicated:


	Three months ended June 30,					Six months ended June 30,
	2009		2010			2009		2010
	(In thousands)
Net income	$	26,707	$	27,998		$	51,378	$	53,695
Foreign currency translation adjustment		21,788		(2,244	)		20,220		(11,954	)

Comprehensive income	$	48,495	$	25,754		$	71,598	$	41,741

Earnings Per Share

Basic earnings per common share is computed by dividing net income by the weighted average number of shares of common stock outstanding during the period. Diluted earnings per common share is computed considering the dilutive effect of stock options using the treasury stock method.

In each relevant period, the net income used in the basic and dilutive earnings per share calculations is the same. The following table reconciles the number of common shares outstanding at June 30 of each year to the weighted average number of common shares outstanding and the weighted average diluted number of common shares outstanding for the purpose of calculating basic and diluted earnings per share:


	Three months ended June 30,				Six months ended June 30,
	2009		2010		2009		2010
	(In thousands)
Number of common shares outstanding at end of period—basic	39,029		39,822		39,029		39,822
Effect of using weighted average common shares outstanding	(3	)	(3	)	(5	)	(48	)

Weighted average basic common shares outstanding—basic	39,026		39,819		39,024		39,774
Dilutive effect of common stock options	407		204		339		220

Weighted average diluted common shares outstanding—diluted	39,433		40,023		39,363		39,994

New Accounting Standards

In April 2010, the FASB issued Accounting Standards Update (“ASU”) 2010-17, Revenue Recognition—Milestone Method (Topic 605). This ASU applies to the milestone method of revenue recognition for research and development transactions. These types of arrangements include payment provisions whereby a portion of the consideration is contingent upon achieving a specific result from research and development efforts. The update provides guidance on the criteria that should be met for determining whether the milestone method of revenue recognition is appropriate. The ASU is effective on a prospective basis for milestones achieved in fiscal years, and interim periods within those years, beginning or after June 15, 2010. This update had no effect on the Company’s revenue recognition policy.

In January 2010, the FASB issued “ASU” 2010-06, Fair Value Measurements and Disclosures (Topic 820)—Improving Disclosures about Fair Value Measurements. This ASU requires some new disclosures and clarifies some existing disclosure requirements about fair value measurement as set forth in Codification Subtopic 820-10. The FASB’s objective is to improve these disclosures and thus, increase transparency in financial reporting. The ASU is effective for interim and annual reporting periods beginning after December 15, 2009, except for the disclosures about purchases, sales, issuances, and settlements in the roll forward of activity in Level 3 fair value measurements. Those disclosures are effective for fiscal years beginning after December 15, 2010, and for interim periods within those fiscal years. Early application is permitted. The adoption of this accounting standard update did not have a material impact on the Company’s condensed consolidated financial statements.

In October 2009, the FASB issued ASU 2009-13, Multiple-Deliverable Revenue Arrangements (“ASU 2009-13”). The new standard changes the requirements for establishing separate units of accounting in a multiple element arrangement and requires the allocation of arrangement consideration to each deliverable based on the relative selling price. The selling price for each deliverable is based on vendor-specific objective evidence (“VSOE”) if available, third-party evidence if VSOE is not available, or estimated selling price if neither VSOE or third-party evidence is available. ASU 2009-13 is effective for revenue arrangements entered into in fiscal years beginning on or after June 15, 2010. The adoption of this standard will not have a material effect on the Company’s condensed consolidated financial statements.

3.	Stock-Based Compensation and Stock Option Awards

During the three and six months ended June 30, 2010, the Company recognized approximately $1.2 million and $2.4 million, respectively, of stock-based compensation expense compared to $912,000 and $1.9 million, respectively, for the three and six months ended June 30, 2009. Stock-based compensation expense is included in the selling, general and administrative expense line of the Condensed Consolidated Statements of Income. No stock-based compensation expense was capitalized during the three and six months ended June 30, 2010 or 2009. There were no stock options granted in the second quarter of 2010 or 2009. Refer to Note 12 of the Company’s 2009 Form 10-K for additional information regarding stock-based compensation plans.

4.	Inventories

Inventories consist of the following:


	December 31, 2009			June 30, 2010
	(In thousands)
Raw materials and supplies	$	50,853		$	44,709
Work in progress		74,956			56,602
Finished goods		149,749			162,085

		275,558			263,396
Less: allowance for obsolete and excess inventory		(24,201	)		(23,439	)

	$	251,357		$	239,957

5.	Geographic Areas


	Three months ended June 30,						Six months ended June 30,
	2009			2010			2009			2010
	(In thousands)
Revenues:
Western Hemisphere
Products	$	56,869		$	77,201		$	110,271		$	146,670
Services		8,562			9,883			18,723			20,635
Intercompany		13,954			15,021			29,691			27,617

Total	$	79,385		$	102,105		$	158,685		$	194,922

Eastern Hemisphere
Products	$	38,585		$	27,271		$	72,764		$	62,089
Services		8,935			6,959			18,543			15,133
Intercompany		923			241			1,320			1,578

Total	$	48,443		$	34,471		$	92,627		$	78,800

Asia – Pacific
Products	$	17,946		$	17,716		$	35,501		$	35,262
Services		2,289			2,970			4,906			4,744
Intercompany		1,118			129			1,117			1,752

Total	$	21,353		$	20,815		$	41,524		$	41,758

Summary
Products	$	113,400		$	122,188		$	218,536		$	244,021
Services		19,786			19,812			42,172			40,512
Intercompany		15,995			15,391			32,128			30,947
Eliminations		(15,995	)		(15,391	)		(32,128	)		(30,947	)

Total	$	133,186		$	142,000		$	260,708		$	284,533

Income (loss) before income taxes:
Western Hemisphere	$	20,774		$	22,774		$	36,903		$	33,478
Eastern Hemisphere		8,939			5,467			22,882			15,004
Asia – Pacific		6,252			6,989			12,724			17,831
Eliminations		449			4,151			(1,271	)		7,700

Total	$	36,414		$	39,381		$	71,238		$	74,013


	December 31, 2009			June 30, 2010
	(In thousands)
Total Long-Lived Assets:
Western Hemisphere	$	158,210		$	165,076
Eastern Hemisphere		27,214			23,724
Asia – Pacific		18,029			27,456
Eliminations		(3,563	)		(3,405	)

Total	$	199,890		$	212,851

Total Assets:
Western Hemisphere	$	518,475		$	548,432
Eastern Hemisphere		158,112			136,540
Asia – Pacific		147,644			167,877
Eliminations		(6,985	)		(4,992	)

Total	$	817,246		$	847,857

6.	Commitments and Contingencies

MPF Contract

In 2006, the Company entered into a contract in the amount of approximately $47 million with MPF Corp. Ltd. (“MPF”), pursuant to which the Company agreed to construct risers and related equipment to be installed on an offshore drill ship being constructed for MPF. In September 2008, MPF and its affiliates filed a Chapter 11 bankruptcy case in the United States Bankruptcy Court for the Southern District of Texas, Houston Division (Case No. 08-36084). At the time of the bankruptcy filing, the Company had recognized approximately $20 million in revenues under the contract and had received payments of approximately $16 million. In April 2010, the Company, MPF and a new third-party buyer signed an amendment to the original contract and a novation agreement, pursuant to which the third party, MPF and the Company agreed that the third party would assume the contract. The novation agreement was approved by the bankruptcy court on June 8, 2010 and became effective on July 20, 2010. Under the amended contract, the new third party is required to pay for modifications, unpaid invoices, interest and other incidental costs. As a result, the total value of the contract has increased from approximately $47 million to approximately $50 million.

Deepwater Horizon Incident

On April 22, 2010, a deepwater Gulf of Mexico drilling rig known as theDeepwater Horizon that was operated by BP Exploration & Production, Inc. (“BP”) sank after an explosion and fire that began on April 20, 2010. Crude oil flowing from the well site has spread across thousands of square miles of the Gulf of Mexico and has reached the United States Gulf Coast. Efforts to contain the flow of hydrocarbons from the well are being led by the United States government and by BP and its affiliates. In addition, there were eleven fatalities and a number of injuries as a result of the explosion and fire. The cause of the explosion, fire, and resulting oil spill is being investigated by numerous industry participants, governmental agencies, and Congressional committees.

The Company is a party to an ongoing contract with an affiliate of BP to supply wellhead systems in connection with BP’s Gulf of Mexico operations, and the Company’s wellhead and certain of its other equipment were in use on theDeepwater Horizon at the time of the incident.

The Departments of Homeland Security and Interior are currently conducting a joint investigation into the cause of the incident. The U.S. Coast Guard, a component of the Department of Homeland Security, and the Bureau of Ocean Energy Management, Regulation, and Enforcement (“BOE”) (formerly known as the Minerals Management Service), a bureau of the Department of the Interior, share jurisdiction over the investigation. In addition, another investigation has been commenced by the U.S. Chemical Safety and Hazard Investigation Board, and the President of the United States has established the National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling to, among other things, examine the relevant facts and circumstances concerning the causes of the incident and develop options for guarding against future oil spills associated with offshore drilling. Further, on June 1, 2010, the United States Attorney General announced that the Department of Justice was launching civil and criminal investigations into the incident to examine the actions of those involved, and that the Department of Justice was working with attorneys general of states affected by the incident. The Department of Justice announced that it is reviewing, among other traditional criminal statutes, The Clean Water Act, which carries civil penalties and fines as well as criminal penalties, The Oil Pollution Act of 1990, which can be used to hold parties liable for cleanup costs and reimbursement for government efforts, and The Migratory Bird Treaty Act of 1918 and Endangered Species Act of 1973, which provide penalties for injury and death to wildlife and bird species.

On May 28, 2010, the United States Department of the Interior issued an order imposing a six-month suspension on all offshore deepwater drilling projects in the Gulf of Mexico. A preliminary injunction was issued blocking enforcement of the deepwater drilling suspension on June 22, 2010, and the Department of the Interior issued a new suspension of deepwater drilling on July 12, 2010. The current moratorium is set to expire on or before November 30, 2010.

The Company has been designated as a party-in-interest, received requests for certain information and provided testimony in connection with the joint investigation. The Company has also received requests to preserve information from the joint investigation team, the Department of Justice and the U.S. Chemical Investigation and Hazardous Incident Board. The Company is cooperating fully with all of the ongoing governmental investigations. The Company may also receive additional invitations and/or requests for participation in hearings or investigations from other governmental bodies related to the incident.

The BOE is expected to issue new safety and environmental guidelines or regulations for drilling in the United States Gulf of Mexico, and potentially in other geographic regions, and may take other steps that could increase the costs of offshore oil and gas exploration and production, reduce the permitted area of operations and result in permitting delays. The Company cannot predict at this time the impact that this incident may have on governmental laws or governmental regulation of offshore oil and gas exploration and production activities or the level of demand for the Company’s products in future periods.

The Company has been named along with other unaffiliated defendants in six class-action lawsuits and three other lawsuits that allege pollution damage claims, personal injuries and/or business losses arising out of theDeepwater Horizon incident. These actions were filed against the Company between May 11, 2010 and July 21, 2010 in federal courts in the Eastern District of Louisiana and the Northern, Middle and Southern Districts of Florida and in state court in Mobile County, Alabama. The lawsuits generally allege, among other things, violation of state and federal environmental and other laws and regulations, negligence, gross negligence, strict liability and/or property damages and generally seek awards of unspecified economic, compensatory and punitive damages. The Company has retained counsel and is investigating and evaluating the claims, the theories of recovery, damages asserted, and its respective defenses to all of these claims. The Company intends to vigorously defend any litigation, fines, and/or penalties relating to theDeepwater Horizon incident. Additional lawsuits may be filed against the Company. At this time, the ultimate disposition of these matters cannot be determined and therefore it is not possible to reasonably estimate the amount of loss or range of losses that might result from an adverse ruling or settlement of these legal matters. Accordingly, no liability has been accrued in conjunction with these matters.

The Company is currently investigating its rights to indemnification from BP’s affiliate and other parties for potential claims and expenses arising from theDeepwater Horizon incident under its existing contract with the affiliate of BP. The Company’s indemnification rights under the contract cover potential claims for personal injury, property damage and the control and removal of pollution or contamination, except for, among other things, claims brought by employees of the Company and claims brought by third parties to the extent the Company is at fault or as a result of a defect in the Company’s products. Under the contract, the Company has, among other things, generally agreed to indemnify BP and its affiliates for claims for personal injury of the Company’s employees or its subcontractors, for claims brought by third parties to the extent the Company is at fault, and for claims resulting from pollution or contamination as a result of a defect in the Company’s products. The contract provides that the Company’s indemnification obligation for pollution or contamination arising from a defect in its products is limited to $5 million. To the extent that BP’s other contractors performing work on the well agreed in their contracts with BP to indemnify the Company for claims of personal injury of such contractor’s employees or subcontractors as well as for claims of damages to their property, the Company has entered into a reciprocal agreement to indemnify those other contractors.

The Company has a general liability insurance program with an aggregate coverage limit of $100 million. The insurance is designed to cover claims brought against the Company by businesses and individuals with respect to property damage, injury or death and pollution. There can be no assurance that the Company’s insurance policies will cover all potential claims and expenses relating to theDeepwater Horizonincident. In addition, the Company’s insurance policies may not cover fines or penalties, as well as costs and expenses related to government-mandated clean up of pollution. Insurance coverage can be the subject of uncertainties and, particularly in the event of large claims, potential disputes with insurance carriers.

General

The Company operates its business and markets its products and services in most of the significant oil and gas producing areas in the world and is, therefore, subject to the risks customarily attendant to international operations and dependency on the condition of the oil and gas industry. Additionally, products of the Company are used in potentially hazardous drilling, completion, and production applications that can cause personal injury, product liability, and environmental claims. Although exposure to such risk has not resulted in any significant problems for the Company in the past, there can be no assurance that ongoing and future developments will not adversely impact the Company.

The Company is also involved in a number of legal actions arising in the ordinary course of business. Although no assurance can be given with respect to the ultimate outcome of such legal action, in the opinion of management, the ultimate liability with respect thereto will not have a material adverse effect on the Company’s operations, financial position or cash flows.

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following is management’s discussion and analysis of certain significant factors that have affected certain aspects of the Company’s financial position, results of operations and cash flows during the periods included in the accompanying unaudited condensed consolidated financial statements. This discussion should be read in conjunction with the unaudited condensed consolidated financial statements presented elsewhere herein, as well as the discussion under “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the annual consolidated financial statements included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2009.

Overview

Dril-Quip designs, manufactures, sells and services highly engineered offshore drilling and production equipment that is well suited for use in deepwater, harsh environment and severe service applications. The Company designs and manufactures subsea equipment, surface equipment and offshore rig equipment for use by major integrated, large independent and foreign national oil and gas companies in offshore areas throughout the world. The Company’s principal products consist of subsea and surface wellheads, subsea and surface production trees, subsea control systems and manifolds, mudline hanger systems, specialty connectors and associated pipe, drilling and production riser systems, liner hangers, wellhead connectors and diverters. Dril-Quip also provides technical advisory assistance on an as-requested basis during installation of its products, as well as rework and reconditioning services for customer-owned Dril-Quip products and rental of running tools for use in connection with the installation and retrieval of the Company’s products.

Deepwater Horizon Incident

On April 22, 2010, a deepwater Gulf of Mexico drilling rig known as theDeepwater Horizon that was operated by BP Exploration & Production, Inc. (“BP”) sank after an explosion and fire that began on April 20, 2010. The Department of Interior has issued an order imposing a suspension of deepwater drilling in the U.S. Gulf of Mexico, which is currently set to expire on or before November 30, 2010. We are not currently able to quantify the extent of the impact of this incident and the related moratorium on our future revenues or earnings. Our revenues and earnings may be affected by, among other things, new or revised governmental laws or regulations relating to offshore oil and gas exploration and production activities, both in the Gulf of Mexico and in other areas in which our customers operate, and the effect of such laws or regulations on the level of demand for our products and services. For example, in July 2010, the EIA estimated that the reduction in crude oil production in the Gulf of Mexico in the fourth quarter of 2010 would be approximately 31,000 barrels per day and approximately 82,000 barrels per day in 2011 if the current moratorium remains in place. For additional information, see “Commitments and Contingencies,” Note 6 to the condensed consolidated financial statements, Part II, Item 1, “Legal Proceedings,” and Part II, Item 1(a), “Risk Factors.”

Oil and Gas Prices

The market for offshore drilling and production equipment and services in general, and the Company’s products and services in particular, are substantially dependent on the condition of the oil and gas industry and the willingness of oil and gas companies to make capital expenditures on exploration, drilling and production operations offshore. Declines in oil and gas prices may adversely affect the willingness of some oil and gas companies to make capital expenditures on exploration, drilling and production operations offshore, which could have an adverse impact on the Company’s operations, financial position or cash flows.

According to the Energy Information Administration (“EIA”) of the U.S. Department of Energy, average crude oil (West Texas Intermediate Cushing) and natural gas (Henry Hub) closing prices are listed below as the average of the closing prices for the periods covered by this report:


	Three months ended June 30,				Six months ended June 30,
	2009		2010		2009		2010
Crude oil ($/Bbl)	$	59.61	$	78.05	$	51.51	$	78.46
Natural gas ($/Mcf)		3.83		4.45		4.27		4.87

During the second quarter of 2009, crude oil closing prices ranged between $45.82 and $72.69 per barrel, as compared to a range of $68.01 and $86.84 per barrel for the same period in 2010. During the six months ended June 30, 2009, crude oil closing prices ranged between $34.03 and $72.69 per barrel, as compared to a range of $68.01 to $86.84 per barrel for the same period in 2010. From April 22, 2010 (the date of theDeepwater Horizon incident) through June 30, 2010, West Texas Intermediate Cushing crude oil prices have averaged $76.44 per barrel.

According to the July 2010 release of the Short-Term Energy Outlook published by the EIA, West Texas Intermediate crude oil prices are projected to average $78.69 per barrel for the full year 2010 and $82.50 per barrel in 2011. At June 30, 2010 the EIA reported West Texas Intermediate crude oil at a price of $75.63 per barrel.

In its July 2010 report, the EIA projected Henry Hub natural gas prices to average $4.57 per Mcf for the full year 2010 and $5.03 per Mcf in 2011. The 2010 average price is $0.73 per Mcf higher than 2009 average, with most of the increase expected to occur in the third quarter of 2010, due to projections of increased hurricane activity in the Gulf of Mexico for the 2010 hurricane season. At June 30, 2010, OilSpiel reported Henry Hub natural gas prices at a price of $4.49 per Mcf.

In its July 2010 Oil Market Report, the International Energy Agency projected worldwide oil demand in 2010 to be 86.5 million barrels per day, compared to an estimated 84.7 million barrels per day in 2009 and expects worldwide demand to further increase in 2011 to 87.8 million barrels per day.

Rig Count

Detailed below is the average contracted rig count for the Company’s geographic regions for the three and six months ended June 30, 2009 and 2010. The rig count data includes floating rigs (semi-submersibles and drill ships) and jack-ups. The Company has included only these types of rigs as they are the primary end users of the Company’s products.


	Three months ended June 30,		Six months ended June 30,
	2009	2010	2009	2010
Western Hemisphere	166	183	171	179
Eastern Hemisphere	153	144	157	143
Asia – Pacific	233	237	236	235

	552	564	564	557

Source: ODS – Petrodata RigBase – June 30, 2009 and 2010

The table represents rigs under contract and includes rigs currently drilling as well as rigs committed, but not yet drilling. According to ODS-Petrodata RigBase, as of June 30, 2010, there were 64 rigs under contract in the U.S. Gulf of Mexico and 35 of these were actively drilling (26 jack-ups and 9 floating rigs).

The Company believes that the number of rigs (semi-submersibles, jack-ups and drill ships) under construction impacts its revenue because in certain cases, its customers order some of the Company’s products during the construction of such rigs. As a result, an increase in rig construction activity tends to favorably impact the Company’s backlog, while a decrease in rig construction activity tends to negatively impact the Company’s backlog. According to ODS-Petrodata, at the end of both June 2009 and 2010, there were 149 and 123 rigs, respectively, under construction and the expected delivery dates for the rigs under construction at June 30, 2010 are as follows:


Remainder of 2010		41
2011		45
2012		22
2013		2
2014		13

		123

Regulation

The demand for the Company’s products and services is also affected by laws and regulations relating to the oil and gas industry in general, including those specifically directed to offshore operations. The adoption of new laws and regulations, or changes to existing laws or regulations, that curtail exploration and development drilling for oil and gas for economic or other policy reasons could adversely affect the Company’s operations by limiting demand for its products. For a description of certain actions taken by the U.S. government related to theDeepwater Horizonincident, see “Commitments and Contingencies” in Note 6 to the condensed consolidated financial statements.

Business Environment

Oil and gas prices and the level of offshore drilling and production activity have been characterized by significant volatility in recent years. Worldwide military, political, economic and other events have contributed to oil and natural gas price volatility and are likely to continue to do so in the future. Oil and gas prices fell from previously historic levels beginning in mid-2008 and continued into 2009, and began to stabilize somewhat in the latter half of 2009. In the first six months of 2010, crude oil prices generally were over $70 per barrel on a daily basis. Through July 2010, the prices for crude oil have closed over $70 per barrel each day. The Company expects continued volatility in both crude oil and natural gas prices, as well as in the level of drilling and production related activities. The volatility in prices appears to have impacted the land drilling activity more so than offshore drilling, particularly in deeper offshore waters, where Dril-Quip’s products are more often utilized.

Even during periods of high prices for oil and natural gas, companies exploring for oil and gas may cancel or curtail programs, or reduce their levels of capital expenditures for exploration and production for a variety of reasons. In addition, a significant and prolonged decline in hydrocarbon prices or other catastrophic accidents relating to drilling would also likely have a material adverse effect on the Company’s results of operations. The Company believes that its backlog should help mitigate the impact of negative market conditions; however, a prolonged decline in commodity prices, an extended continuation of the downturn in the global economy, a continuation or extension of the moratorium in the Gulf of Mexico or future restrictions or declines in offshore oil and gas exploration and production could have a negative impact on the Company and/or its backlog. The Company’s backlog at June 30, 2010 was approximately $538 million compared to approximately $550 million at March 31, 2010 and $563 million at December 31, 2009. On July 15, 2010, the Company

announced that it had been awarded a contract valued at approximately $100 million to supply drilling and production equipment for the P-61 Tension Leg Wellhead Platform (TLWP) to be installed in the Papa Terra field located in the Campos Basin offshore Brazil. The value of this contract will be included in Dril-Quip’s backlog during the third quarter of 2010. Revenues related to this project will be recognized using the percentage-of-completion method. Additionally, with the settlement of the MPF bankruptcy and the transfer of the project to a new buyer in July 2010, the Company will include the value of the remaining revised project (approximately $30 million) in its backlog for the third quarter of 2010. The original MPF contract has not been included in backlog since the second quarter of 2008. The Company can give no assurance that backlog will remain at current levels. All of the Company’s projects currently included in its backlog are subject to change and/or termination at the option of the customer. In the case of a change or termination, the customer is required to pay the Company for work performed and other costs necessarily incurred as a result of the change or termination. In the past, terminations and cancellations have been immaterial to the Company’s overall operating results.

Revenues. Dril-Quip’s revenues are generated from two sources: products and services. Product revenues are derived from the sale of offshore drilling and production equipment. Service revenues are earned when the Company provides technical advisory assistance for installation of the Company’s products, reconditioning services and rental of running tools for installation and retrieval of the Company’s products. For each of the six months ended June 30, 2009 and 2010, the Company derived 84% and 86%, respectively, of its revenues from the sale of its products, and 16% and 14%, respectively, of its revenues from services. Product contracts are negotiated and sold separately from service contracts. In addition, service contracts are not included in the product contracts or related sales orders and are not offered to the customer as a condition of the sale of the Company’s products. The demand for products and services is generally based on world-wide economic conditions in the offshore oil and gas industry, and is not based on a specific relationship between the two types of contracts. Substantially all of the Company’s sales are made on a purchase order basis. Purchase orders are subject to change and/or termination at the option of the customer. In case of a change or termination, the customer is required to pay the Company for work performed and other costs necessarily incurred as a result of the change or termination.

The Company accounts for larger and more complex projects that have relatively longer manufacturing time frames on a percentage-of-completion basis. For the first six months of 2010, 18 projects representing approximately 19% of the Company’s total revenues and 22% of its product revenues were accounted for using percentage-of-completion accounting, compared to 15 projects representing approximately 18% of the Company’s total revenue and 21% of its product revenue for the first six months of 2009. This percentage may fluctuate in the future. Revenues accounted for in this manner are generally recognized upon a calculation of the percentage complete, which is used to determine the revenue earned and the appropriate portion of total estimated cost of sales. Accordingly, price and cost estimates are reviewed periodically as the work progresses, and adjustments proportionate to the work complete are reflected in the period when such estimates are revised. Losses, if any, are recognized when they first become known. Amounts received from customers in excess of revenues recognized are classified as a current liability.

The Company has substantial international operations, with approximately 62% and 58% of its revenues derived from foreign sales for the three-months ended June 30, 2009 and 2010, respectively and 65% and 57% for the six months ended June 30, 2009 and 2010, respectively. Substantially all of the Company’s domestic revenue relates to operations in the Gulf of Mexico. Domestic revenue approximated 38% and 42% of the Company’s total revenues for the three months ended June 30, 2009 and 2010, respectively, and 35% and 43% of the Company’s total revenues for the six months ended June 30, 2009 and 2010.

The following table sets forth, for the periods indicated, a breakdown of our Gulf of Mexico products and services revenues:


	Three months ended June 30,				Six months ended June 30,
	2009		2010		2009		2010
	(In millions)
Revenues:
Products
Subsea equipment	$	27.7	$	22.8	$	49.8	$	57.7
Surface equipment		0.2		0.3		0.7		1.1
Offshore rig equipment		15.0		29.8		23.6		47.3

Total products		42.9		52.9		74.1		106.1
Services		8.1		7.4		17.1		16.9

Total Gulf of Mexico revenues	$	51.0	$	60.3	$	91.2	$	123.0

We are unable to quantify the extent of the impact that the Gulf of Mexico drilling moratorium will have on our future revenues. However, revenues associated with the Gulf of Mexico totaled $123.0 million or approximately 43% of our worldwide revenues during the first six months of 2010. We believe that the moratorium will have little or no impact on revenues related to offshore rig equipment but could have an impact on revenues related to subsea and surface equipment during the final six months of 2010. In addition, service revenues (which were $16.9 million, or approximately 6% of our total revenues during the first six months of 2010) could be substantially negatively impacted by the U.S. Gulf of Mexico drilling moratorium during the last half of this year.

In addition, the moratorium could result in delayed product and service orders in the second half of 2010 and could have a negative impact on our orders and financial results for 2011. Accordingly, we will continue to monitor the moratorium’s impact on our ongoing business operations.

Cost of Sales. The principal elements of cost of sales are labor, raw materials and manufacturing overhead. Cost of sales as a percentage of revenues is influenced by the product mix sold in any particular period and market conditions. The Company’s costs related to its foreign operations do not significantly differ from its domestic costs.

Selling, General and Administrative Expenses. Selling, general and administrative expenses include the costs associated with sales and marketing, general corporate overhead, compensation expense, stock option expense, legal expenses, foreign currency transaction gains and losses and other related administrative functions.

Engineering and Product Development Expenses. Engineering and product development expenses consist of new product development and testing, as well as application engineering related to customized products.

Income Tax Provision. The Company’s effective income tax rate has historically been lower than the statutory rate primarily due to foreign income tax rate differentials, research and development credits and deductions related to domestic production activities.

Results of Operations

The following table sets forth, for the periods indicated, certain statement of operations data expressed as a percentage of revenues:


	Three months ended June 30,				Six months ended June 30,
	2009		2010		2009		2010
Revenues:
Products	85.1	%	86.0	%	83.8	%	85.8	%
Services	14.9		14.0		16.2		14.2

Total revenues	100.0		100.0		100.0		100.0
Cost of sales:
Products	49.3		46.9		48.2		47.8
Services	8.8		9.1		9.1		8.9

Total cost of sales	58.1		56.0		57.3		56.7
Selling, general and administrative expenses	9.7		11.3		10.6		10.3
Engineering and product development expenses	4.9		5.0		4.9		4.9
Special item	—		—		—		2.1

Operating income	27.3		27.7		27.2		26.0
Interest income	0.1		—		0.1		—
Interest expense	—		—		—		—

Income before income taxes	27.4		27.7		27.3		26.0
Income tax provision	7.3		8.0		7.6		7.1

Net income	20.1	%	19.7	%	19.7	%	18.9	%

The following table sets forth, for the periods indicated, a breakdown of our products and service revenues:


	Three months ended June 30,				Six months ended June 30,
	2009		2010		2009		2010
	(In millions)
Revenues:
Products
Subsea equipment	$	84.2	$	79.7	$	159.8	$	173.9
Surface equipment		8.6		5.7		15.0		12.7
Offshore rig equipment		20.6		36.8		43.7		57.4

Total products		113.4		122.2		218.5		244.0
Services		19.8		19.8		42.2		40.5

Total revenues	$	133.2	$	142.0	$	260.7	$	284.5

Three Months Ended June 30, 2010 Compared to Three Months Ended June 30, 2009.

Revenues. Revenues increased by $8.8 million, or approximately 6.6%, to $142.0 million in the three months ended June 30, 2010 from $133.2 million in the three months ended June 30, 2009. Product revenues accounted for the entire increase, as a result of increased revenues of $16.2 million in offshore rig equipment, partially offset by decreases of $4.5 million in subsea equipment and $2.9 in surface equipment. Product revenues increased in the Western Hemisphere by approximately $20.3 million, partially offset by decreases in product revenues in the Eastern Hemisphere and Asia-Pacific of $11.3 million and $200,000, respectively. Service revenues increased by approximately $1.3 million in the Western Hemisphere and $700,000 in Asia-Pacific, partially offset by a decrease in the Eastern Hemisphere of $2.0 million. The majority of the changes in service revenues related to a decrease in the rental of running tools offset by increases in technical advisory services and reconditioning of customer-owned Dril-Quip products.

Cost of Sales. Cost of sales increased by $2.1 million, or approximately 2.7%, to $79.5 million for the three months ended June 30, 2010 from $77.4 million for the same period in 2009. As a percentage of revenues, cost of sales were approximately 56.0% and 58.1% for the three-month period ended June 30, 2010 and 2009, respectively. The decrease in cost of sales as a percentage of revenues resulted primarily from changes in product mix.

Selling, General and Administrative Expenses. For the three months ended June 30, 2010, selling, general and administrative expenses increased by approximately $3.2 million, or 24.8%, to $16.1 million from $12.9 million for the same period in 2009. The increase in selling, general and administrative expenses was primarily due to the effect of foreign currency transactions and increased stock option expenses. The Company experienced approximately $1.2 million in foreign currency transaction losses in the second quarter of 2010 as compared to $1.5 million in foreign currency transaction gains in the second quarter of 2009. Stock option expense for the second quarter of 2010 totaled $1.2 million compared to $912,000 in the second quarter of 2009. Selling, general and administrative expenses as a percentage of revenues increased from 9.7% in 2009 to 11.3% in 2010.

Engineering and Product Development Expenses. For the three months ended June 30, 2010, engineering and product development expenses increased by approximately $500,000, or 7.6%, to $7.1 million from $6.6 million in the same period of 2009. Engineering and product development expenses as a percentage of revenues increased from 4.9% in 2009 to 5.0% in 2010.

Interest Income. Interest income for the three months ended June 30, 2010 was approximately $69,000 as compared to $132,000 for the three months ended June 30, 2009. This decrease resulted from reduced interest earned on short-term investments from lower interest rates. Due to the recent global financial crisis, the Company continues to keep the majority of its short-term investments in funds which invest in U.S. Treasury obligations, which normally earn lower interest rates than money market funds.

Interest expense. Interest expense for the three months ended June 30, 2010 was $11,000 compared to $29,000 for the same period in 2009.

Income tax provision. Income tax expense for the three months ended June 30, 2010 was $11.4 million on income before taxes of $39.4 million, resulting in an effective tax rate of approximately 29%. Income tax expense for the three months ended June 30, 2009 was $9.7 million on income before taxes of $36.4 million, resulting in an effective tax rate of approximately 27%.The increase in the effective income tax rate reflects the difference in income before income taxes among the Company’s three geographic areas, which have different income tax rates.

Net Income. Net income was approximately $28.0 million for the three months ended June 30, 2010 and $26.7 million for the same period in 2009, for the reasons set forth above.

Six Months Ended June 30, 2010 Compared to Six Months Ended June 30, 2009.

Revenues. Revenues increased by $23.8 million, or approximately 9.1%, to $284.5 million in the six months ended June 30, 2010 from $260.7 million in the six months ended June 30, 2009. Product revenues increased by approximately $25.5 million for the six months ended June 30, 2010 compared to the same period in 2009 as a result of increased revenues of $14.1 million in subsea equipment and $13.7 in offshore rig equipment, partially offset by decreases in surface equipment of $2.3 million. Product revenues increased in the Western Hemisphere by $36.4 million, partially offset by decreases in the Eastern Hemisphere and Asia-Pacific of $10.7 million and $200,000, respectively. Service revenues decreased by approximately $1.7 million due to decreased service revenues in the Eastern Hemisphere of $3.4 million and Asia-Pacific of $200,000, partially offset by an increase in the Western Hemisphere of $1.9 million. The majority of the decrease in service revenues related to a decrease in the rental of running tools, partially offset by an increase in technical advisory services.

Cost of Sales. Cost of sales increased by $12.0 million, or approximately 8.0%, to $161.4 million for the six months ended June 30, 2010 from $149.4 million for the same period in 2009. As a percentage of revenues, cost of sales were approximately 56.7% and 57.3% for the six months ended June 30, 2010 and 2009, respectively. The decrease in cost of sales as a percentage of revenues resulted primarily from changes in product mix.

Selling, General and Administrative Expenses. For the six months ended June 30, 2010, selling, general and administrative expenses increased by approximately $2.1 million, or 7.7%, to $29.5 million from $27.4 million for the same period in 2009. The increase in selling, general and administrative expenses was primarily due to the effect of foreign currency transaction gains, and increased stock option expenses. The Company experienced approximately $1.4 million in foreign currency transaction gains in the first six months of 2009 compared to $491,000 in foreign currency transactions gains in the first six months of 2010. Stock option expense of the first six months of 2010 totaled $2.4 million compared to $1.9 million in the first six months of 2009. Selling, general and administrative expenses as a percentage of revenues decreased from 10.6% in 2009 to 10.3% in 2010.

Engineering and Product Development Expenses. For the six months ended June 30, 2010, engineering and product development expenses increased by $900,000, or approximately 7.0%, to $13.8 million from $12.9 million for the same period in 2009. Engineering and product development expenses as a percentage of revenues was 4.9% for both 2009 and 2010.

Special Item. Under the terms of an amnesty law enacted by the State of Rio de Janeiro, Brazil, the Company settled assessments regarding state tax on the importation of goods in March 2010 in the amount of BRL21.7 million (approximately U.S. $12.2 million as of March 2010). Of the total amount paid, BRL10.6 million (approximately U.S. $5.9 million as of March 2010) is reflected in “Special Item” on the Condensed Consolidated Statements of Income for the six months ended June 30, 2010.

Interest Income. Interest income for the six months ended June 30, 2010 was $130,000 as compared to $344,000 for the six months ended June 30, 2009. This decrease was due to reduced interest earned on short-term investments due to lower interest rates. Due to the recent global financial crisis, the Company continues to keep the majority of its short-term investments in funds which invest in U.S. Treasury obligations, which normally earn lower interest rates than money market funds.

Interest Expense. Interest expense for the six months ended June 30, 2010 was $38,000 compared to $77,000 for the same period in 2009.

Income tax provision. Income tax expense for the six months ended June 30, 2010 was $20.3 million on income before taxes of $74.0 million, resulting in an effective tax rate of approximately 27%. Income tax expense for the six months ended June 30, 2009 was $19.9 million on income before taxes of $71.2 million, resulting in an effective tax rate of approximately 27%.

Net Income. Net income was approximately $53.7 million for the six months ended June 30, 2010 and $51.4 million for the same period in 2009, for the reasons set forth above.

Liquidity and Capital Resources

Cash flows provided by (used in) type of activity were as follows:


	Six months ended June 30,
	2009			2010
	(In thousands)
Operating activities	$	44,165		$	43,740
Investing activities		(21,968	)		(20,902	)
Financing activities		(207	)		4,999

		21,990			27,837
Effect of exchange rate changes on cash activities		(1,954	)		274

Increase in cash and cash equivalents	$	20,036		$	28,111

Statements of cash flows for entities with international operations that are local currency functional exclude the effects of the changes in foreign currency exchange rates that occur during any given period, as these are noncash changes. As a result, changes reflected in certain accounts on the Condensed Consolidated Statements of Cash Flows may not reflect the changes in corresponding accounts on the Condensed Consolidated Balance Sheets.

The primary liquidity needs of the Company are (i) to fund capital expenditures to improve and expand facilities and manufacture additional running tools and (ii) to fund working capital. Recently, the Company’s principal sources of funds have been cash flows from operations.

During the six months ended June 30, 2010, the Company generated $43.7 million of cash from operations as compared to $44.2 million for the same period in 2009. The decrease in cash generated from operating activities for the first six months of 2010 includes the March 2010 settlement of assessments between the Company and the State of Rio de Janeiro of $12.2 million. Of the total, $5.9 million is reflected as a pre-tax decrease on the Condensed Consolidated Statements of Income and $6.3 million is reflected as an increase in the total assets of the Condensed Consolidated Balance Sheet. Cash totaling approximately $24.0 million was used during the first six months of 2010 due to increases in operating assets and liabilities, compared to $15.5 million that was used during the same period in 2009. The increase in operating assets and liabilities during the first six months of 2010 primarily reflected an increase in receivables of $10.7 million and a decrease in inventory of $4.3 million. Prepaid and other assets increased by $1.1 million. The $15.5 million decrease in trade accounts payable and accrued expenses resulted largely from a reduction in customer prepayment liabilities related to long-term projects.

Capital expenditures by the Company were $22.0 million and $22.9 million in the first six months of 2010 and 2009, respectively. The capital expenditures for the first six months of 2010 were primarily $4.6 million for machinery and equipment, $12.5 million for facilities and $3.6 million for running tools and other expenditures of $1.3 million. Principal payments on long-term debt were approximately $337,000 during the six months ended June 30, 2010.

Dril-Quip (Europe) Limited has a credit agreement with the Bank of Scotland dated March 21, 2001 in the original amount of U.K. Pounds Sterling 4.0 million (approximately U.S. $6 million) as of June 2010. Borrowing under this facility bears interest at the Bank of Scotland base rate, which was 0.50% at June 30, 2010, plus 1%, and is repayable in 120 equal monthly installments, plus interest. Substantially all of this facility was used to finance capital expenditures in Norway. The outstanding balance of this facility at June 30, 2010 was approximately U.S. $500,000. The facility is secured by land and buildings in Aberdeen, Scotland and contains no restrictive financial covenants.

The Company believes that cash generated from operations plus cash on hand will be sufficient to fund operations, working capital needs and anticipated capital expenditure requirements for the next twelve months. However, any significant future declines in hydrocarbon prices, catastrophic events or significant changes in regulations affecting us or our customers, could have a material adverse effect on the Company’s liquidity. Should market conditions result in unexpected cash requirements, the Company believes that additional borrowing from commercial lending institutions would be available and adequate to meet such requirements.

Off-Balance Sheet Arrangements

The Company has no off-balance sheet arrangements.

Critical Accounting Policies

Refer to our Annual Report on Form 10-K for the year ended December 31, 2009 for a discussion of our critical accounting policies. During the six months ended June 30, 2010 there were no material changes in our judgments and assumptions associated with the development of our critical accounting policies.

Item 3.

Quantitative and Qualitative Disclosures About Market Risk

The Company is currently exposed to certain market risks related to interest rate changes and fluctuations in foreign exchange rates. The Company does not engage in any material hedging transactions, forward contracts or currency trading which could mitigate the market risks inherent in such transactions.

Foreign Exchange Rate Risk

Through its subsidiaries, the Company conducts a portion of its business in currencies other than the United States dollar, principally the British pound sterling and to a lesser extent, the Brazilian real. The Company experienced a foreign currency pre-tax loss of approximately $1.2 million during the three months ended June 30, 2010 and a $491,000 pre-tax gain during the six months ended June 30, 2010, compared to approximately $1.5 million and $1.4 million in pre-tax gains for the three and six months ended June 30, 2009, respectively. Historically, the Company’s foreign currency gains and losses have not been significant. However, when significant disparities between the British pound sterling and the U.S. dollar or the Brazilian real and the U.S. dollar occur, there can be no assurance that the Company will be able to protect itself against such currency fluctuations.

Interest Rate Risk

As described in “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources,” the Company has entered a loan that requires the Company to pay interest at a floating rate. The floating-rate obligation exposes the Company to the risk of increased interest expense in the event of increases in the short-term interest rates. Based upon the June 30, 2010 balance of approximately $500,000 related to this floating rate obligation, each 1.0% rise in interest rates would result in additional annual interest expense to the Company of approximately $5,000 or $1,250 per quarter.

Item 4.

Controls and Procedures

In accordance with Exchange Act Rules 13a-15 and 15d-15, the Company carried out an evaluation, under the supervision and with the participation of management, including the Company’s Co-Chief Executive Officers and Chief Financial Officer, of the effectiveness of the Company’s disclosure controls and procedures as of the end of the period covered by this report. Based on that evaluation, the Company’s Co-Chief Executive Officers and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of June 30, 2010 to provide reasonable assurance that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and such information is accumulated and communicated to management, including the Company’s Co-Chief Executive Officers and Chief Financial Officer, as appropriate to allow timely decisions regarding disclosure.

“Management’s Annual Reports on Internal Control over Financial Reporting” appears on page 35 of the 2009 Annual Report on Form 10-K.

There has been no change in the Company’s internal controls over financial reporting that occurred during the quarter ended June 30, 2010 that has materially affected, or is reasonably likely to materially affect, the Company’s internal controls over financial reporting.

PART II—OTHER INFORMATION

Item 1.

Legal Proceedings.

Effective July 20, 2010, the bankruptcy court approved the novation agreement between the Company, MPF and a new third-party buyer. The agreement amended and transferred the contract between the Company and MPF to the new buyer who will assume the remaining obligations under the amended contract. In addition, the Company is currently involved in nine lawsuits filed as a result of theDeepwater Horizon incident in the Gulf of Mexico. For a description of the Company’s legal proceedings, see “Commitments and Contingencies,” Note 6 to the condensed consolidated financial statements.

The Company also is involved in a number of legal actions arising in the ordinary course of business. Although no assurance can be given with respect to the ultimate outcome of such legal actions, in the opinion of management, the ultimate liability with respect thereto will not have a material adverse effect on the Company’s financial position.

Item 1A.

Risk Factors.

Other than with respect to the risk factors as set forth below, there have been no material changes from the risk factors disclosed in the Company’s Annual Report of Form 10K for the year ended December 31, 2009.

Certain matters relating to theDeepwater Horizon explosion, subsequent oil spill and resulting moratorium on deepwater drilling offshore in the Gulf of Mexico may negatively impact our business located in the Gulf of Mexico and potential other worldwide locations.

On April 22, 2010, a deepwater Gulf of Mexico drilling rig known as theDeepwater Horizon sank after an explosion and fire that began on April 20, 2010. Due to this inability to stop the escaping crude oil for a substantial period of time, a moratorium was placed on offshore deepwater drilling in the Gulf of Mexico which is currently expected to be in place through November 2010. Our revenues, and particularly our revenues derived from technical advisory services and rental of running tools, may be significantly negatively affected by this moratorium.

We do not yet know the extent this incident may cause the United States or other countries to restrict or further regulate offshore drilling. This event and its aftermath have resulted in proposed legislation and regulation in the United States that could result in additional regulations of the offshore oil and gas exploration and production industry, which may further result in substantial increases in cost or further delays in drilling in the Gulf of Mexico. The Department of the Interior has issued directives calling for additional safety and performance standards as well as rigorous monitoring and testing requirements. Any additional regulations could increase our costs as well as that of our customers, which could cause some projects to become non-economical, and as a result, reduce demand for our products and services.

We have been named along with other unaffiliated defendants in multiple lawsuits that allege pollution damage claims, personal injuries and/or business losses arising out of theDeepwater Horizon incident. The lawsuits generally allege, among other things, violation of state and federal environmental and other laws and regulations, negligence, gross negligence, strict liability and/or property damages and generally seek awards of unspecified economic, compensatory and punitive damages. Additional lawsuits may be filed in the future. A negative outcome with respect to any of these lawsuits, or any lawsuits that may arise in the future, could have a material negative impact on our results of operations.

In addition the incident may lead to further tightening of the availability of insurance coverage. We may not be able to obtain adequate insurance at a reasonable price, thereby making certain projects unfeasible from an economic standpoint. If liability limits are increased or the insurance market becomes more restricted, this may increase the risks and costs of conducting offshore exploration and development activities, which could materially impact our results of operations.

FORWARD LOOKING STATEMENTS

This Quarterly Report on Form 10-Q includes certain statements that may be deemed to be “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Statements contained in all parts of this document that are not historical facts are forward-looking statements that involve risks and uncertainties that are beyond the control of Dril-Quip, Inc. (the “Company” or “Dril-Quip”). You can identify the Company’s forward-looking statements by the words “anticipate,” “estimate,” “expect,” “may,” “project,” “future,” “believe” and similar expressions, or by the Company’s discussion of strategies or trends. Although the Company believes that the expectations reflected in such forward-looking statements are reasonable, no assurance can be given that these expectations will prove to be correct. These forward-looking statements include the following types of information and statements as they relate to the Company:

•

future operating results and cash flow;

•

scheduled, budgeted and other future capital expenditures;

•

working capital requirements;

•

the availability of expected sources of liquidity;

•

the introduction into the market of the Company’s future products;

•

the market for the Company’s existing and future products;

•

the Company’s ability to develop new applications for its technologies;

•

the exploration, development and production activities of the Company’s customers;

•

compliance with present and future environmental regulations and costs associated with environmentally related penalties, capital expenditures, remedial actions and proceedings;

•

effects of pending legal proceedings; and

•

future operations, financial results, business plans and cash needs.

These statements are based on assumptions and analyses in light of the Company’s experience and perception of historical trends, current conditions, expected future developments and other factors the Company believes were appropriate in the circumstances when the statements were made. Forward-looking statements by their nature involve substantial risks and uncertainties that could significantly impact expected results, and actual future results could differ materially from those described in such statements. While it is not possible to identify all factors, the Company continues to face many risks and uncertainties. Among the factors that could cause actual future results to differ materially are the risks and uncertainties discussed under “Item 1A. Risk Factors” in Part 1 of our Annual Report on Form 10-K for the fiscal year ended December 31, 2009 and the following:

•

the volatility of oil and natural gas prices;

•

the cyclical nature of the oil and gas industry;

•

uncertainties associated with the United States and worldwide economies;

•

uncertainties regarding political tensions in the Middle East and elsewhere;

•

current and potential governmental regulatory actions in the United States and regulatory actions and political unrest in other countries;

•

uncertainties regarding future oil and gas exploration and production activities in the Gulf of Mexico and elsewhere, including activities impacted by the current moratorium affecting the U.S. Gulf of Mexico;

•

operating interruptions (including explosions, fires, weather-related incidents, mechanical failure, unscheduled downtime, labor difficulties, transportation interruptions, spills and releases and other environmental risks);

•

the Company’s reliance on product development;

•

technological developments;

•

the Company’s dependence on key employees and skilled machinists, fabricators and technical personnel;

•

the Company’s reliance on sources of raw materials;

•

control by certain stockholders;

•

impact of environmental matters, including future environmental regulations;

•

competitive products and pricing pressures;

•

fluctuations in foreign currency;

•

the Company’s reliance on significant customers;

•

creditworthiness of the Company’s customers;

•

fixed price contracts;

•

the worldwide financial crisis;

•

access to capital markets;

•

negative outcomes of litigation, threatened litigation or government proceedings; and

•

war and terrorist acts.

Many of such factors are beyond the Company’s ability to control or predict. Any of the factors, or a combination of these factors, could materially affect the Company’s future results of operations and the ultimate accuracy of the forward-looking statements. Management cautions against putting undue reliance on forward-looking statements or projecting any future results based on such statements or present or prior earnings levels. Every forward-looking statement speaks only as of the date of the particular statement, and the Company undertakes no obligation to publicly update or revise any forward-looking statement.

Item 6.

The following exhibits are filed herewith:


Exhibit No.		Description

*3.1		Restated Certificate of Incorporation of the Company (Incorporated herein by reference to Exhibit 3.2 to the Company’s Registration Statement on Form S-1 (Registration No. 333-33447)).

*3.2		Certificate of Designations of Series A Junior Participating Preferred Stock of the Company (Incorporated herein by reference to Exhibit 3.1 to the Company’s report on Form 8-K dated November 25, 2008).

*3.3		Amended and Restated Bylaws of the Company (Incorporated herein by reference to Exhibit 3.1 to the Company’s report on Form 8-K dated December 21, 2007.)

*4.1		Form of certificate representing Common Stock (Incorporated herein by reference to Exhibit 4.2 to the Company’s Registration Statement on Form S-1 (Registration No. 333-33447).

*4.2		Registration Rights Agreement among the Company and certain stockholders (Incorporated herein by reference to Exhibit 4.2 to the Company’s Registration Statement on Form S-1 (Registration No. 333-33447).

*4.3		Rights Agreement dated as of November 24, 2008 between Dril-Quip, Inc. and Mellon Investor Services LLC, as Rights Agent (Incorporated herein by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K filed on November 25, 2008).

31.1		Rule 13a-14(a)/15d-14(a) Certification of Larry E. Reimert.

31.2		Rule 13a-14(a)/15d-14(a) Certification of J. Mike Walker.

31.3		Rule 13a-14(a)/15d-14(a) Certification of Jerry M. Brooks.

32.1		Section 1350 Certification of Larry E. Reimert.

32.2		Section 1350 Certification of J. Mike Walker.

32.3		Section 1350 Certification of Jerry M. Brooks.

*	Incorporated herein by reference as indicated.

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


DRIL-QUIP, INC.

By:		/S/ JERRY M. BROOKS
		Jerry M. Brooks, Vice-President—Finance and Chief Financial Officer (Principal Accounting Officer and Duly Authorized Signatory)

Date: August 5, 2010

Positive
Negative
Uncertain
Constraining
Legalese
Litigous
Readability	8th grade Avg

Innovex International (INVX) 10-Q2010 Q2 Quarterly report

Content analysis