TeraWulf (WULF) 10-K 2014 FY Annual report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C.  20549

FORM 10-K

(Mark One)

xAnnual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the Fiscal Year Ended December 31, 2014

or

oTransition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the Transition Period From                           to                             .

Commission file number 000-25727

IKONICS CORPORATION

(Exact name of registrant as specified in its charter)

Minnesota	41-0730027
(State or other jurisdiction of incorporation or organization)	(I.R.S. employer identification no.)
4832 Grand Avenue Duluth, Minnesota	55807
(Address of principal executive offices)	(Zip code)

Registrant’s telephone number, including area code:  (218) 628-2217

Securities registered under Section 12(b) of the Act:

	Name of Each Exchange
Title of Each Class	On Which Registered
Common Stock, par value $.10 per share	Nasdaq Capital Market

Securities registered under Section 12(g) of the Act:  None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o  No x

Check whether the issuer is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.  Yes o  No x

Check whether the issuer (1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x  No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files.)  Yes x  No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained in this form, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer o	Accelerated filer o	Non-accelerated filer o	Smaller reporting company x
		(do not check if smaller
		reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o  No x

The aggregate market value of the voting stock held by non-affiliates of the registrant as of June 30, 2014 was $22,927,957 based on the most recent closing price for the issuer’s Common Stock on such date as reported on the Nasdaq Capital Market.  For purposes of determining this number, all officers and directors of the issuer are considered to be affiliates of the issuer, as well as individual stockholders holding more than 10% of the issuer’s outstanding Common Stock.  This number is provided only for the purpose of this report on Form 10-K and does not represent an admission by either the issuer or any such person as to the status of such person.

State the number of shares outstanding of each of the issuer’s classes of common equity, as of the latest practical date:  Common Stock, $.10 par value — 2,018,253 issued and outstanding as of February 27, 2015.

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the safe harbor provisions of Section 21E of the Securities Exchange Act of 1934, as amended, relating to future events or the future financial performance of the Company.  In some cases, you can identify forward-looking statements by the following words: “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “ongoing,” “plan,” “potential,” “predict,” “project,” “should,” “will,” “would,” or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words. Forward-looking statements are only predictions or statements of intention subject to risks and uncertainties and actual events or results could differ materially from those projected.  Forward-looking statements are based on information available at the time the statements are made and involve known and unknown risks, uncertainties and other factors that may cause our results, levels of activity, performance or achievements to be materially different from the information expressed or implied by the forward-looking statements in Annual Report on Form 10-K. Factors that could cause actual results to differ include the risks, uncertainties and other matters set forth below under the caption “Risk Factors” and the matters set forth under the captions “Business” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” as well as those discussed elsewhere in this Annual Report on Form 10-K.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Company’s definitive proxy statement for its 2015 Annual Meeting of Shareholders are incorporated by reference in Part III.

PART I

Item 1.  Business

General

IKONICS Corporation (“IKONICS” or the “Company”) was incorporated in Minnesota as Chroma-Glo, Inc. in 1952 and changed its name to The Chromaline Corporation in 1982.  In December 2002, the Company changed its name to IKONICS Corporation.  The Company’s traditional businesses, Domestic, IKONICS Imaging and Export, have been the development, manufacture and selling of photosensitive liquids (“emulsions”) and films for the screen printing and awards and recognition industries.  These sales have been augmented with inkjet receptive films, ancillary chemicals and related equipment to provide a full line of products and services to its customers. These products are sold worldwide primarily through distributors.  In 2006, the Company began a major effort to diversify and expand its business to industrial markets. These efforts now include the Company’s Advanced Material Solutions (“AMS”) business unit, formerly named Micro-Machining, which uses the Company’s proprietary and patent applied for processes and photoresist film for the abrasive etching of composite materials, industrial ceramics, silicon wafers, and glass wafers.  The customer base for AMS is primarily the aerospace and electronics industries.  Based on its expertise in ultraviolet curable fluids and inkjet receptive substrates, the Company has also developed a patented digital texturing technology (“DTX”) for putting patterns and textures into steel molds for the plastic injection molding industry. The ultimate original equipment manufacturer (“OEM”) for the Company’s DTX technology is primarily the automotive industry. The Company offers a suite of products to the mold making industry.  Industrial inkjet printers, which are integral to the DTX system, are manufactured and sold by a strategic partner.  The Company’s business plan is to sell consumable fluids and transfer films.  For most markets these sales are direct to the mold maker.  The DTX technology is being expanded to prototyping where the Company’s technology offers a unique combination of high definition, large format prints, and abrasion resistance.

Products

The Company has four primary technology platforms: Ultraviolet (UV) chemistry, film coating and construction, technical abrasive etching, and industrial inkjet printing. The Company’s traditional products and new initiatives are based on these platforms and their combinations. The Company’s Chromaline branded products for the screen printing industry and Ikonics Imaging products for the awards and recognition market are based on UV chemistry and film coating and construction capabilities; the AMS offering is a combination of UV chemistry, film coating and construction and technical abrasive etching capabilities; DTX is a combination of UV chemistry, film coating and construction, and industrial inkjet printing.  There is overlap and synergy in the market between the Domestic, Ikonics Imaging, AMS and DTX product offerings, and the Company offers ancillary products, including equipment to provide customers with a total solution.  The Company considers this combination of core technologies and product offerings to be unique.

2

Distribution

The Company currently has approximately 220 domestic and international distributors for its Chromaline and ImageMate screen printing emulsions and films.  The Company’s abrasive etching products are mainly sold directly to end users in the awards and recognition market under the Ikonics Imaging brand. AMS products are sold either directly to users or the Company offers AMS as a service. DTX includes the sales of consumable inks and films to customers that have purchased specialized industrial inkjet printers from the Company’s strategic partner. DTX sales are both direct to users and through distributors. The Company markets and sells its products through magazine advertising, trade shows and the internet.

The Company has a diverse customer base both domestically and abroad with international sales accounting for 28.4% of total sales in 2014 and does not depend on one or a few customers for a material portion of its revenues.  In 2014 and 2013, no one customer accounted for more than 10% of net sales.

Quality Control in Manufacturing

In March 1994, IKONICS became the first firm in northern Minnesota to receive ISO 9001 certification.  ISO 9000 is a worldwide standard issued by the International Organization for Standardization that provides a framework for quality assurance.  The Company has been recertified every three years beginning in 1997.  IKONICS’ quality function goal is to train all employees properly in both their work and in the importance of their work.  Internal records of quality, including related graphs and tables, are reviewed regularly and discussions are held among management and employees regarding how improvements might be realized.  The Company has rigorous materials selection procedures and also uses testing procedures to assure its products meet quality standards.

Research and Development and Intellectual Property

The Company spent 3.6% of sales ($665,000) on research and development in 2014 and 3.7% of sales ($649,000) in 2013.  In its research program, IKONICS has developed ultraviolet light-sensitive chemistries used in the manufacture of screen print stencils, photoresists for abrasive etching and acid resist and prototyping ink jet fluids and ink jet receptive films.  The Company has a number of patents and patent applications on these chemistries and applications.  There can be no assurance that any patent granted to the Company will provide adequate protection to the Company’s intellectual property.  Within the Company, steps are taken to protect the Company’s trade secrets, including physical security, confidentiality and non-competition agreements with employees, non-disclosure agreements where applicable, and confidentiality agreements with vendors.  Over the past few years, the Company has directed a larger portion of it research and development resources towards industrial inkjettable fluids and ink jet receptive substrates.  The Company has also invested significant resources for personnel and equipment to develop proprietary products and techniques for the etching of composite materials, industrial ceramics and electronic wafers.

In addition to its patents, the Company has various trademarks including the “IKONICS,” “Chromaline,” “PhotoBrasive,” “AccuArt,”  “Nichols,” “imagemate” and “DTX” trademarks.

Raw Materials

The primary raw materials used by IKONICS in its production are photopolymers, polyester films, polyvinylacetates, polyvinylalcohols and water.  The Company’s purchasing staff leads in the identification of both domestic and foreign sources for raw materials and negotiates price and terms for all domestic and foreign markets.  IKONICS’ involvement in foreign markets has given it the opportunity to become a global buyer of raw materials at lower overall cost.  The Company has a number of suppliers for its operations.  Some suppliers provide a significant amount of key raw materials to the Company, but the Company believes alternative sources are available for most materials.  For those raw materials where an alternative source is not readily available, the Company has contingency raw material replacement plans.  To date, there have been no significant shortages of raw materials.  The Company believes it has good supplier relations.

Competition

The Company competes in its markets based on product development capability, quality, reliability, availability, technical support and price.  Though the screen printing market is much larger than the awards and recognition market, IKONICS commands significantly more market share in the latter.  IKONICS has two primary competitors in its screen printing film business.  They are larger than IKONICS and possess greater resources than the Company in many areas.  The Company has numerous competitors in the market for screen print emulsions, many of whom are larger than IKONICS and possess greater resources.  The market for the Company’s abrasive etching products in the awards and recognition market has one significant competitor.  IKONICS considers itself to be the leader in this market.  There are significant competitors, using different technologies in the new markets being entered by the Company. The primary competition for AMS is from other machining methods, most of which are well established. The primary

3

competition for DTX comes from old, well-established technologies based on wax and screen printing and new competition from laser technologies.

Government Regulation

The Company is subject to a variety of federal, state and local industrial laws and regulations, including those relating to the discharge of material into the environment and protection of the environment.  The governmental authorities primarily responsible for regulating the Company’s environmental compliance are the Environmental Protection Agency, the Minnesota Pollution Control Agency and the Western Lake Superior Sanitary District.  Failure to comply with the laws promulgated by these authorities may result in monetary sanctions, liability for environmental clean-up and other equitable remedies.  To maintain compliance, the Company may make occasional changes in its waste generation and disposal procedures.

These laws and regulations have not had a material effect upon the capital expenditures or competitive position of the Company.  The Company believes that it complies in all material respects with the various federal, state and local regulations that apply to its current operations.  Failure to comply with these regulations could have a negative impact on the Company’s operations and capital expenditures and such negative impact could be significant.

The Company also is subject to regulations from foreign governments covering the importation of certain chemicals. The Company believes that it complies in all material respects with these regulations that apply to its current products.  Failure to comply with these regulations could have a negative impact on the Company’s operations and capital expenditures and such negative impact could be significant.

Employees

As of February 23, 2015, the Company had approximately 75 full-time employees, 70 of whom are located at the Company’s two facilities in Duluth, Minnesota and five of whom are outside technical sales representatives in various locations in the United States.  None of the Company’s employees are subject to a collective bargaining agreement and the Company believes that its employee relations are good.

Item 1A.  Risk Factors

The Company’s DTX and AMS initiatives involve new technologies that might not be executed successfully and might not achieve market acceptance, which would adversely affect the Company’s results of operation, financial condition and prospects.

The Company’s DTX and AMS initiatives involve new and unproven technologies that might never achieve market acceptance.  During 2014 and 2013, the Company generated operating losses in both its DTX and AMS segments.  The Company’s ability for generating profits from these initiatives will depend on its products gaining market acceptance among customers, which cannot be guaranteed.  The degree of market acceptance of any new products the Company develops will depend on a number of factors, including:

·the Company’s ability to successfully develop its technologies and products to include the capabilities the Company intends;

·the Company’s ability to accurately assess the functions and features customers desire;

·the perceived effectiveness and price of the Company’s products compared to alternative products and technologies;

·the development of new products and technologies by current competitors or new competitors that might enter the Company’s markets; and

·the strength of the Company’s marketing and distribution functions.

If new products that the Company develops do not have the capabilities the Company expects or fail to achieve an adequate level of acceptance by customers for any reason, then the Company’s AMS and DTX business units could fail to generate the revenues the Company expects and may not become profitable or sustain profitability.

If the Company’s new products and technologies do not achieve market acceptance, the Company will not realize a return on its investments in its new business initiatives.

The Company has invested, and plans to continue to invest, significant resources in its research and development efforts to develop technology for its AMS and DTX business units.  The Company spent 3.6% of sales, or $665,000, on research and

4

development in 2014 and 3.7% of sales, or $649,000, in 2013.  A substantial portion of these investments was in the Company’s AMS and DTX initiatives.  The Company plans to continue to invest significant resources in research and development on these initiatives in the foreseeable future.  The Company believes successful execution of these initiatives is important for its ability to grow its revenues and profits.  However, if the Company fails to generate its projected revenues in these business units, the Company’s investments in these areas would not generate the profits the Company expects and its results of operations, financial condition and prospects would be materially and adversely affected.

Adverse changes to global economic conditions generally, and to the aerospace and automotive industries in particular, may harm the Company’s business.

The prospects for economic growth in the United States and other countries remain uncertain and major economies where the Company conducts business could continue or return to recessionary conditions.  Economic concerns and issues such as reduced access to capital for businesses may cause the Company’s customers to delay or reduce purchases of the Company’s products.  Given the continued uncertainty concerning the global economy, the Company also faces risks that may arise from financial difficulties experienced by suppliers and customers, such as an inability to collect receivables or the continued operation of suppliers.

The Company’s AMS segment focuses primarily on customers in the aerospace industry, and its DTX segment focuses primarily on customers in the automotive industry.  The aerospace and automotive industries have experienced volatility in recent years in a manner similar to or greater than the global economy generally.  If either or both these industries experiences difficulties that reduce demand for their products generally, the Company’s results of operations, financial condition and prospects would suffer.

The Company faces risks related to sales to government subcontractors, including potential delays or cancellations of planned sales and additional regulatory compliance costs and obligations.

The Company’s customers for its AMS business unit manufacture aerospace products, and the Company derives a portion of its revenue as a subcontractor to general contractors working for the U.S. government.  As a government subcontractor, demand and payment for the Company’s products may be adversely affected by public sector budgetary cycles or funding authorizations.  Any cancellation or delay of product orders would adversely affect the Company’s operating results and financial condition.

In addition, government subcontractors are subject to oversight, including special rules on accounting, expenses, reviews and security.  This additional oversight could increase the Company’s compliance costs and creates risk of a failure to comply with applicable rules and regulations.  A failure to comply with these rules and regulations could result in termination of contracts, fines and suspensions, debarment from future government business or other penalties, any of which could adversely affect the Company’s business.

The Company faces significant competition and expects to face increasing competition in many aspects of its businesses, which could cause operating results to suffer.

The Company operates in highly competitive industries that experience rapid technological and market developments, changes in customer needs, and frequent product introductions and improvements, particularly with respect to the AMS and DTX businesses.  If the Company is unable to anticipate and respond to these developments, its products or technologies could become uncompetitive or obsolete.  Most of the Company’s competitors in the AMS and DTX fields are larger and better capitalized than the Company with longer operating histories.  These advantages could allow the Company’s competitors to invest more in research and development and sales and marketing than the Company, which could make the competitive products more attractive or better known to consumers than the Company’s products.  In addition, because there is rapid technological change in fields in which the Company operates, the Company could face competition from new sources in the future that customers find more attractive.

The Company also could face increased competition in its traditional Domestic and IKONICS Imaging units.  Capital costs for machinery necessary to operate in these industries have decreased in recent years, increasing the possibility that the Company will face new competitors.  An increase in the amount of competition the Company faces, or a loss of competitiveness in any of the Company’s business units for any reason, could adversely affect its revenues and gross margins.

The Company’s failure to comply with environmental laws and regulations could harm its business and results of operations.

The manufacturing of the Company’s products requires the use of hazardous materials that are subject to a broad array of environmental laws and regulations.  The Company’s failure to comply with these laws or regulations could result in:

·regulatory penalties, fines and legal liabilities;

5

·suspension of production;

·alteration of manufacturing processes; and

·restrictions on the Company’s operations or sales.

The Company’s failure to manage the use, transportation, emissions, discharge, storage, recycling or disposal of hazardous materials could lead to increased costs or future liabilities.  Environmental laws and regulations also could require the Company to acquire pollution abatement or remediation equipment, modify product designs or incur other expenses.

Third parties may claim the Company infringes their intellectual property rights, which could harm the Company’s business.

The Company may face claims that it infringes other parties’ intellectual rights.  Regardless of a claim’s merit, claims that the Company’s products or processes infringe the intellectual property rights of others could cause the Company to incur large costs to respond to, defend, and resolve the claims, and they may divert the efforts and attention of management and technical personnel.  As a result of any intellectual property rights infringement claims, the Company could be required to:

·pay infringement claims;

·stop manufacturing, using, or selling products or technology subject to infringement claims;

·develop other products or technology not subject to infringement claims, which could be time-consuming, costly or impossible; or

·license technology from the party claiming infringement, which license may not be available on commercially reasonable terms or at all.

These actions could harm the Company’s competitive position, result in additional expenses, or require the Company to impair its assets.  If the Company alters or stops production of affected items, its revenue could be harmed.

The Company may be unable to enforce or protect its intellectual property rights, which may harm its ability to compete and may harm its business.

The Company’s ability to enforce its patents, trademarks and other intellectual property rights is subject to general litigation risks, as well as uncertainty as to the enforceability of the Company’s intellectual property rights in various countries.  If the Company seeks to enforce its rights, it could become subject to claims that its intellectual property rights are invalid, not enforceable, or licensed to the opposing party.  The Company’s assertion of intellectual property rights also could result in the other party seeking to assert claims against the Company, which could harm the Company’s business.  The Company’s inability to enforce its intellectual property rights for any reason could harm its competitive position and business.

If the Company is unable to protect the confidentiality of its proprietary information and know-how, the value of its technology could be adversely affected.

In addition to patented technology, the Company relies on unpatented proprietary technology, trade secrets, processes and know-how.  The Company generally seeks to protect this information by confidentiality agreements with employees, consultants, advisors and third parties.  These agreements may be breached, and the Company may not have adequate remedies for any such breach.  In addition, the Company’s trade secrets may otherwise become known or be independently developed by competitors.  To the extent that the Company’s employees, consultants or contractors use intellectual property owned by others in their work for the Company, disputes may arise as to the rights in related or resulting know-how and inventions.

The Company operates a global business that exposes it to additional risks.

The Company operates throughout the world, including in the United States, Europe and China.  These international operations create a variety of risks and uncertainties, including:

·rapid changes in government, economic and political policies and conditions, political or civil unrest or instability, terrorism or epidemics,

·fluctuations in foreign currency exchange rates;

6

·compliance with and changes in foreign laws and regulations, as well as U.S. laws affecting the activities of U.S. companies abroad, including the Foreign Corrupt Practices Act of 1977 (the “FCPA”), as amended;

·different, complex and changing laws governing intellectual property rights, sometimes affording companies lesser protection in certain areas;

·longer accounts receivable payment cycles and difficulties in collecting accounts receivable;

·protectionist laws and business practices that favor local producers; and

·potentially adverse tax consequences, including the complexities of foreign value added tax systems and restrictions on the repatriation of earnings.

The occurrence of any one of these risks could negatively affect the Company’s international business and, consequently, its results of operations generally.

The Company faces risks related to sales through distributors and other third parties.

During 2014, approximately 73% of the Company’s sales, including nearly all sales of its Domestic products and nearly all of its International sales, were conducted through third parties.  Using third parties for distribution exposes the Company to many risks, including competitive pressure, concentration, credit risk and compliance risks.  Distributors may sell products that compete with the Company’s products, and the loss of a distributor could reduce the Company’s revenue.  Distributors may face financial difficulties, including bankruptcy, which could harm the Company’s collection of accounts receivable and financial results.  Violations of the FCPA or similar laws by distributors or other third-party intermediaries could have a material impact on the Company’s business.  Failing to manage risks related to the Company’s use of distributors may reduce sales, increase expenses, and weaken its competitive position.

Increases in prices and declines in the availability of raw materials could negatively impact the Company’s financial results.

Certain raw materials needed to manufacture products are obtained from a limited number of suppliers and many of the raw materials are petroleum-based.  Under normal market conditions, these raw materials are generally available on the open market from a variety of producers.  While alternate supplies of most key raw materials are available, supplier production outages may lead to strained supply-demand situations for certain raw materials.  The substitution of key raw materials could require the Company to identify new supply sources, or reformulate and retest products or processes.  From time to time, the prices and availability of these raw materials may fluctuate, which could impair the Company’s ability to procure necessary materials, or increase the cost of manufacturing products.  If the prices of raw materials increase in a short period of time, the Company may be unable to pass these increases on to its customers in a timely manner or at all, which could reduce its gross margins.  Like most companies in the Company’s industries, the Company does not have long-term supply contracts for most of its key raw materials, which exacerbates the foregoing risks to the Company.

If any of the Company’s present single or limited source suppliers become unavailable or inadequate, its customer relationships, results of operations and financial condition may be adversely affected.

The Company acquires certain of its materials that are critical to its operations from a limited number of third parties.  Should any of the Company’s current single or limited source suppliers become unavailable or inadequate, or impose terms unacceptable to the Company such as increased pricing terms, the Company could be required to spend a significant amount of time and expense to develop alternate sources of supply, and may not be successful in doing so on acceptable terms or at all.  If the Company is unable to find a suitable supplier for a particular material, it could be required to modify its existing business processes or offerings to accommodate the situation.  As a result, the loss of a single or limited source supplier could adversely affect the Company’s relationship with its customers and its results of operations and financial condition.

The Company depends on one manufacturer to make and sell DTX printers. If the manufacturer ceased to make or sell DTX printers, or failed to meet quality standards, the Company’s financial results and prospects would be adversely affected.

The Company relies on one company to manufacture and sell DTX printers.  If the manufacturer ceased to produce or devote resources to selling DTX printers, due to a change in company strategy, to focus on alternative initiatives, or for any other reason, the Company would need to find an alternative manufacturer and seller of DTX printers.  Finding an alternative manufacturer and seller of DTX printers could result in additional costs and delays in growing the Company’s DTX business unit, which would adversely affect the Company’s financial results and prospects.

7

In addition, if these manufacturers failed to produce DTX printers that satisfy the Company’s quality standards, the Company’s reputation with end users could be harmed and the Company could be forced to find a new manufacturer.  Either of these results also would harm the Company’s business and prospects.

The inability to attract and retain qualified personnel could adversely impact the Company’s business.

Sustaining and growing the Company’s business depends on the recruitment, development and retention of qualified employees, including management and research and development personnel.  The inability to recruit and retain key personnel or the unexpected loss of key personnel may adversely affect the Company’s operations.

An active trading market for the Company’s shares of common stock may not develop.

The Company’s common stock has been listed for trading on the Nasdaq Capital Market since 1999 and persistently has experienced limited trading volume.  There can be no assurance that an active public market for the Company’s shares will develop or be sustained.  The lack of an active trading market could adversely affect the price and liquidity of the Company’s common stock.

The Company’s directors and officers own a large percentage of the Company’s common stock, which may allow them to collectively exert significant influence over substantially all matters requiring shareholder approval.

As of December 31, 2014, the Company’s directors and officers collectively beneficially owned approximately 33.77% of its common stock outstanding as of that date.  As a result, the Company’s directors and officers could exert significant influence over all matters requiring a shareholder vote, including the election of directors, amendments to the Company’s articles of incorporation, and extraordinary transactions such as mergers or going private transactions.  These ownership positions may have the effect of delaying, deterring or preventing a change in control or a change in the composition of the Company’s board of directors.  In addition, substantial sales of shares beneficially owned by our directors or officers could be viewed negatively by third parties and have a negative impact on the Company’s stock price.

The price of the Company’s common stock may fluctuate significantly.

The price of the Company’s common stock has, and could continue to, fluctuate substantially in a short period of time.  The price of the Company’s common stock could vary for many reasons, including the following:

·future announcements concerning the Company or its competitors;

·introduction of new products by the Company or its competitors, or the failure of the Company’s new products to meet expectations;

·the commencement of, or developments to, litigation involving the Company;

·quarterly variations in operating results, which the Company has experienced in the past and expects to experience in the future;

·business acquisitions or divestitures; or

·changes to the global economy in general, and the aerospace and automotive markets in particular.

In addition, stock markets in general have experienced price and volume fluctuations in recent years, fluctuations that sometimes have been unrelated to the operating performance of the affected companies.  These broad market fluctuations may adversely affect the market price of the Company’s common stock.  The market price of the Company’s common stock could decline below its current price and the market price of the Company’s shares may fluctuate significantly in the future.  These fluctuations may be unrelated to the Company’s performance.

The Company’s operating results and financial condition may fluctuate on a quarterly and annual basis.

The Company’s operating results and financial condition may fluctuate from quarter to quarter and year to year, and could vary due to a number of factors, some of which are outside of the Company’s control.  In addition, the Company’s actual or projected operating results may fail to match its past performance.  The Company’s operating results and financial condition may fluctuate due to a number of factors, including those listed below and those identified throughout this “Risk Factors” section:

8

·the failure of the Company’s new products to meet expectations;

·changes to the costs of raw materials, especially petroleum-based materials;

·the entry of new competitors into the Company’s markets whether by established companies or by new companies;

·the geographic distribution of the Company’s sales;

·changes in customer preferences or needs;

·changes in the amount that the Company invests to develop or acquire new technologies;

·delays between the Company’s expenditures to develop new technologies and products and the generation of sales related thereto;

·changes in the Company’s pricing policies or those of its competitors;

·changes in accounting rules and tax and other laws; and

·general economic and industry conditions that affect customer demand and product development trends.

Due to all of the foregoing factors and the other risks discussed in this “Risk Factors” section, you should not rely on quarter-to-quarter or year-to-year comparisons of the Company’s operating results as an indicator of future performance.

Item 1B. Unresolved Staff Comments

None

Item 2.  Property

The Company primarily conducts its operations in Duluth, Minnesota.  The administrative, sales, research and development, quality and most of the manufacturing activities are housed in a 60,000 square-foot, four-story building, including a basement level.  The building is approximately seventy years old and has been maintained in good condition.  The Company also utilizes a 5,625 square-foot warehouse adjacent to the existing plant building that was constructed in 1997.  These facilities are owned by the Company with no existing liens or leases.  The Company also owns an approximately 11-acre property with a 35,000 square-foot manufacturing and warehouse facility. In addition to warehousing and shipping functions, the facility accommodates the Company’s AMS business along with some manufacturing activities.  The Company also leases 3,000 square feet of warehouse space at one location in Duluth.  The lease term on this facility ends on December 31, 2015.  In 2015, the Company is beginning planning on a 20,000 square-foot expansion to its 35,000 square-foot warehousing and manufacturing facility.  The expansion would accommodate the Company’s growing AMS business and would be dependent on the Company’s AMS process proving its capabilities and increasing its market acceptance.

Item 3.  Legal Proceedings

None.

Item 4.  Mine Safety Disclosures

Not applicable.

9

PART II

Item 5.  Market for Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The Company’s Common Stock is traded on the Nasdaq Capital Market under the symbol IKNX.  The following table sets forth, for the fiscal quarters indicated, the high and low sales prices for the Company’s Common Stock as reported on the Nasdaq Capital Market for the periods indicated.

	High		Low
Fiscal Year Ended December 31, 2014:
First Quarter	$	31.02	$	13.50
Second Quarter	29.00		19.90
Third Quarter	27.20		17.06
Fourth Quarter	17.82		14.03
Fiscal Year Ended December 31, 2013:
First Quarter	$	13.74	$	7.92
Second Quarter	17.99		12.00
Third Quarter	18.98		16.06
Fourth Quarter	19.45		14.25

As of February 19, 2015, the Company had approximately 699 shareholders.  Declaration and payment of dividends is within the sole discretion of the Company’s board of directors.

Item 6. Selected Financial Data

Not applicable

Item 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following management discussion and analysis focuses on those factors that had a material effect on the Company’s financial results of operations and financial condition during 2014 and 2013 and should be read in connection with the Company’s audited financial statements and notes thereto for the years ended December 31, 2014 and 2013, included herein.

Critical Accounting Policies and Estimates

The Company prepares its financial statements in conformity with accounting principles generally accepted in the United States of America.  Therefore, the Company is required to make certain estimates, judgments and assumptions that the Company believes are reasonable based upon the information available.  These estimates and assumptions affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the periods presented.  The accounting policies and estimates which IKONICS believes are the most critical to aid in fully understanding and evaluating its reported financial results include the following:

Trade Receivables.  The Company performs ongoing credit evaluations of its customers and adjusts credit limits based upon payment history and the customer’s current credit worthiness, as determined by review of the current credit information.  The Company continuously monitors collections and payments from its customers and maintains a provision for estimated credit losses based upon historical experience and any specific customer collection issues that have been identified.  While such credit losses have historically been within expectations and the provisions established, the Company cannot guarantee that it will continue to experience the same collection history that has occurred in the past.  The general payment terms are net 30-45 days for domestic customers and net 30-90 days for foreign customers.  A small percentage of the trade receivables balance is denominated in a foreign currency with no concentration in any given country.  At the end of each reporting period, the Company analyzes the receivable balance for customers paying in a foreign currency.  These balances are adjusted to each quarter or year-end spot rate in accordance with FASB ASC 830, Foreign Currency Matters.  The Company also maintains a provision based upon historical experience and any specifically identified issues for any customer related returns, refunds or credits.

10

Inventories.  Inventories are valued at the lower of cost or market value using the last in, first out (LIFO) method.  The Company monitors its inventory for obsolescence and records reductions from cost when required.

Income Taxes.  Deferred taxes are provided on a liability method whereby deferred tax assets are recognized for deductible temporary differences and operating loss and tax credit carryforwards and deferred tax liabilities are recognized for taxable temporary differences.  Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases.  Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will not be realized.  Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.  The Company follows the accounting standard on accounting for uncertainty in income taxes, which addresses the determination of whether tax benefits claimed or expected to be claimed on a tax return should be recorded in the financial statements.  Under this guidance, the Company may recognize the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by taxing authorities, based on the technical merits of the position.  The tax benefits recognized in the financial statements from such a position are measured based on the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement.  The guidance on accounting for uncertainty in income taxes also addresses derecognition, classification, interest and penalties on income taxes, and accounting in interim periods.

Revenue Recognition.  The Company recognizes revenue on sales of products when title passes which can occur at the time of shipment or when the goods arrive at the customer location depending on the agreement with the customer.  The Company sells its products to both distributors and end-users.  Sales to distributors and end-users are recorded based upon the criteria governed by the sales, delivery, and payment terms stated on the invoices from the Company to the purchaser.  In addition to transfer of title / risk of loss, all revenue is recorded in accordance with the criteria outlined within SAB 104 and FASB ASC 605 Revenue Recognition:

(a) persuasive evidence of an arrangement (principally in the form of customer sales orders and the Company’s sales invoices)

(b) delivery and performance (evidenced by proof of delivery, e.g. the shipment of film and substrates with bill of lading used for proof of delivery for FOB shipping point terms, and the carrier booking confirmation report used for FOB destination terms).  Once the finished product is shipped and physically delivered under the terms of the invoice and sales order, the Company has no additional performance or service obligations to complete

(c) a fixed and determinable sales price (the Company’s pricing is established and is not based on variable terms, as evidenced in either the Company’s invoices or the limited number of distribution agreements; the Company rarely grants extended payment terms and has no history of concessions)

(d) a reasonable likelihood of payment (the Company’s terms are standard, and the Company does not have a substantial history of customer defaults or non-payment)

Sales are reported on a net basis by deducting credits, estimated normal returns and discounts.  The Company’s return policy does not vary by geography.  The customer has no rotation or price protection rights and the Company is not under a warranty obligation.  Freight billed to customers is included in sales.  Shipping costs are included in cost of goods sold.

Results of Operations

Year Ended December 31, 2014 Compared to Year Ended December 31, 2013

Sales.  The Company’s net sales increased 5.7% in 2014 to a record $18.5 million compared to net sales of $17.5 million in 2013.  IKONICS Imaging sales grew $807,000, or 21.0%, to $4.6 million mainly due to a large initial stocking order from its new distributor, JDS Industries.  The Company expects continued sales from JDS Industries, but not at the volume of the 2014 initial stocking order. IKONICS Imaging sales have also been positively impacted by improved equipment sales.  Domestic sales increased 8.1% in 2014 due to improved emulsion sales as a result of increased customer demand for existing and newly introduced products into the Company’s traditional markets.

DTX sales also grew from $407,000 in 2013 to $423,000 in 2014 due to higher film sales.  These sales increases were partially offset by a 6.9% Export sales decrease due to lower sales across all geographic regions.  Asia and Europe realized the largest decreases in 2014 compared to the prior year due to poorer general economic conditions and a weaker Euro.  Also unfavorably impacting sales in 2014 was a 5.3% decrease in AMS sales due to loss of a large mask customer.

Gross Profit.  Gross profit in 2014 was $6.7 million, or 36.3% of sales, compared to $6.9 million, or 39.7% of sales in 2013.  Gross margins were unfavorably impacted by an increase in AMS production costs related to the Company’s efforts to improve its

11

production capacity and capabilities.  DTX costs also increased in 2014 as the Company allocated additional resources, both personnel and equipment, to produce textured prints.  Some DTX resources used in the production of textured prints were previously utilized in a selling and administrative capacity.  Domestic gross margins were negatively impacted by a less favorable sales mix as sales volumes for lower margin emulsion sales grew relative to higher margin film sales.  The Export gross margin also declined from 28.1% in 2013 to 26.8% in 2014 due to both a stronger U.S. dollar and a less favorable sales mix.  An increase in sales volumes and a more favorable sales mix improved the IKONICS Imaging gross margin in 2014 to 53.3% from 52.3% in 2013.

Selling, General and Administrative Expenses.  Selling, general and administrative expenses were $5.1 million, or 27.7% of sales, in 2014 compared to $5.4 million, or 30.7% of sales, in 2013.  The decrease reflects lower DTX selling, general and administrative expenses compared to the same period last year as internal resources, both personnel and equipment, previously involved with selling, general and administrative duties were reassigned to the production of textured prints in 2014.  Selling, general and administrative expenses also benefitted from lower IKONICS Imaging and Export promotional expenses.

Research and Development Expenses.  Research and development expenses in 2014 were $665,000, or 3.6% of sales, versus $649,000, or 3.7% of sales, in 2013.  The dollar increase is related to higher production trial and personnel expenses for the year, partially offset by lower depreciation expenses.  The increase in production trial expenses was partially related to efforts to improve DTX consumable products to meet customer requirements.

Income Taxes. During 2014, the Company realized income tax expense of $270,000, or an effective rate of 29.4%, compared to income tax expense of $245,000, or an effective rate of 26.4%, for the same period in 2013.  The increase in current year tax expense and effective rate from 2013 is primarily due to benefits from prior year adjustments recognized in 2013 as well as higher research and development credits generated in the prior year.  The income tax provision for the 2014 and 2013 periods differs from the expected tax expense due to the benefits of the domestic manufacturing deduction, credits for research and development and other non-deductible items.

Liquidity and Capital Resources

The Company has financed its operations principally with funds generated from operations.  These funds have been sufficient to cover the Company’s normal operating expenditures, annual capital requirements, research and development expenditures.

Cash and cash equivalents were $1.9 million and $1.7 million at December 31, 2014 and 2013, respectively.  In addition to its cash, the Company also held $1.8 million of short-term investments as of December 31, 2014 and $1.5 million of short-term investments as of December 31, 2013.  The Company generated $917,000 in cash from operating activities during 2014, compared to generating $1.5 million of cash from operating activities in 2013.  Cash provided by operating activities is primarily the result of the net income adjusted for non-cash depreciation and amortization, deferred taxes, and certain changes in working capital components discussed in the following paragraph.

During 2014, inventories increased by $76,000.  In addition to increased finished goods levels, part of the inventory increase is related to the timing of raw material purchases.  Trade receivables increased $45,000 related to the increase in sales volumes.  The $17,000 decrease in prepaid expenses and other assets is related to a decrease in prepaid promotional expenses.  Accounts payable decreased $161,000 due to the timing of payments to and purchases from vendors while accrued liabilities increased $31,000 due to the timing of the Company’s payroll.  The Company’s income tax receivable increased $122,000 due to timing of estimated 2014 tax payments compared to the calculated 2014 tax liability.

During 2013, inventories decreased by $124,000.  Lower raw material levels are related to the timing of purchases and efforts to tighten inventory volumes.  The $21,000 decrease in prepaid expenses and other assets is related to timing of insurance payments while trade receivables decreased by $9,000.  Accounts payable decreased $62,000 due to the timing of payments to and purchases from vendors while accrued liabilities decreased $5,000.  Income taxes payable decreased $62,000 and income tax receivable increased $16,000 due to the timing of estimated 2013 tax payments compared to the calculated 2013 tax liability.

During 2014, investing activities used $731,000.  Purchases of property and equipment were $434,000, mainly for improvements to AMS equipment, mandatory elevator upgrades, two forklifts and two vehicles.  The Company realized $62,000 in proceeds from the sale of land and two vehicles.  Also during 2014, the Company incurred $57,000 in patent application costs that the Company records as an asset and amortizes upon successful completion of the application process.  The Company also invested $2.7 million in 18 fully insured certificates of deposit during 2014.  Eighteen certificates of deposit totaling $2.4 million matured during 2014.

During 2013, investing activities used $820,000.  Purchases of property and equipment were $763,000.  The majority of these purchases were made to improve AMS capabilities.  Equipment purchases were also made to upgrade research and development

12

equipment and facilities, including improvements to both DTX equipment and equipment and facilities related to screen printing and IKONICS Imaging.  The Company realized $36,000 in proceeds from the sale of two vehicles.  Also in 2013, the Company incurred $71,000 in patent application costs that the Company records as an asset and amortizes upon successful completion of the application process.  The Company also invested $1.8 million in 12 fully insured certificates of deposit during 2013.  Twelve certificates of deposit totaling $1.8 million matured during 2013.

In 2014, the Company received $46,000 from financing activities from the issuance of 6,083 shares of common stock from the exercise of stock options compared to $89,000 the Company received from the issuance of 13,695 shares of common stock from the exercise of stock options in 2013.

A bank line of credit exists providing for borrowings of up to $1.25 million through May 31, 2015.  The Company expects to renew this line of credit or obtain a similar line of credit when the current line of credit expires.  The line of credit is collateralized by trade receivables and inventories and bears interest at 2.5 percentage points over the 30-day LIBOR rate.  The Company did not utilize this line of credit during 2014 and 2013 and there were no borrowings outstanding as of December 31, 2014 and 2013.  There are no financial covenants related to the line of credit.

The Company believes that current financial resources, its line of credit, cash generated from operations and the Company’s capacity for debt and/or equity financing will be sufficient to fund current and anticipated business operations.  The Company also believes that its low debt levels and available line of credit make it unlikely that a decrease in demand for the Company’s products would impair the Company’s ability to fund operations.

Capital Expenditures

In 2014, the Company spent $434,000 on capital expenditures.  Capital expenditures in 2014 were mainly for improvements to AMS capabilities, mandatory elevator upgrades, two forklifts and two vehicles.

During 2013, the Company had $763,000 of capital expenditures.  The majority of these purchases were made to improve AMS capabilities.  Equipment purchases were also made to upgrade research and development equipment and facilities, including improvements to both DTX equipment and equipment and facilities related to screen printing and IKONICS Imaging in addition to a vehicle for sales personnel.

The Company expects capital expenditures in 2015 of approximately $900,000.  The planned expenditures primarily will be for mandatory elevator upgrades not completed in 2014, manufacturing equipment necessary for anticipated AMS aerospace business, other manufacturing equipment upgrades and vehicles for sales personnel.  These commitments are expected to be funded with cash generated from operating activities.  The Company is also beginning to plan and evaluate a potential building expansion to accommodate its AMS operations as the Company’s current facilities are nearing full capacity.  This expansion, along with the expected 2015 purchase of the AMS equipment mentioned above will be dependent on the Company’s AMS process proving its capabilities and increasing its market acceptance among its customers base.  The Company does not intend to proceed with the expansion until the demand for its services is more certain.  The timing and cost of this expansion have not been finalized, but construction could commence in 2015.  Any costs associated with this potential expansion are not included in the Company’s estimated capital expenditures for 2015 discussed above.

International Activity

The Company markets its products in numerous countries in various regions of the world, including North America, Europe, Latin America, and Asia.  The Company’s 2014 foreign sales of $5.3 million were approximately 28.4% of total sales, compared to the 2013 foreign sales of $5.6 million, which were 32.3% of total sales.  IKONICS experienced a decrease in foreign sales across all geographic regions in 2014 due to due to poorer general economic conditions and a weaker Euro.

The Company’s foreign transactions are primarily negotiated, invoiced and paid in U.S. dollars, while a portion is transacted in Euros.  IKONICS has not implemented an economic hedging strategy to reduce the risk of foreign currency translation exposures, which management does not believe to be significant based on the scope and geographic diversity of the Company’s foreign operations as of December 31, 2014.  Furthermore, the impact of foreign exchange on the Company’s balance sheet and operating results was not material in either 2014 or 2013.

Future Outlook

IKONICS has spent on average approximately 4% of its sales dollars for the past few years in research and development and has made capital expenditures related to its DTX and AMS programs.  The Company plans to maintain its efforts in this area to

13

expedite internal product development as well as to form technological alliances with outside experts to commercialize new product opportunities.

The Company continues to make progress on its new AMS business initiative.  The Company has entered into agreements with several major aerospace companies to determine the feasibility of using its unique technologies in the production of military and commercial aircraft.  The Company is currently supplying products to the aerospace industry for use in the construction of new generation commercial aircraft.  Progress is being made on a number of in-house feasibility projects, and the Company believes that several of these could lead to ongoing business.  In anticipation of this business, the Company is expanding its AMS capacity and patent applications.

The Company is also continuing to make progress on its DTX business initiatives.  In addition to its growing inkjet technology business, the Company offers a range of products for creating texture surfaces and has introduced a fluid for use in prototyping. The Company is currently working with its DTX customers on training, production optimization, and product improvements.  The Company has been awarded European, Japanese and United States patents on its DTX technologies.  The Company has modified its DTX technology to enter the market for prototyping and 3D printing.

Domestically, both the Domestic Chromaline Screen Print Product and its IKONICS Imaging units remain profitable in mature markets and require aggressive strategies to grow market share. Although there will be challenges, the Company believes these businesses will continue to grow and prosper.  In addition to its traditional emphasis on domestic markets, the Company will continue efforts to grow its business internationally by attempting to develop new markets and expanding market share where it has already established a presence.

Other future activities undertaken to expand the Company’s business may include acquisitions, building improvements, equipment additions, new product development and marketing opportunities.

Off-Balance Sheet Arrangements

The Company has no off-balance sheet arrangements.

Recent Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09, Revenue from Contracts with Customers.  ASU 2014-09 supersedes the revenue recognition requirements in Revenue Recognition (Topic 605), and requires entities to recognize revenue in a way that depicts the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled to in exchange for those goods or services. ASU 2014-09 is effective for the Company in our fiscal year beginning on January 1, 2017, including interim periods within that reporting period and is to be applied retrospectively, with early application not permitted.  The Company is currently evaluating the effect that adopting this new accounting guidance will have on our consolidated results of operations, cash flows and financial position.

In August 2014, FASB issued ASU No. 2014-15, ‘Presentation of Financial Statements—Going Concern (Subtopic 205-40): Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern, intended to define management’s responsibility to evaluate whether there is substantial doubt about an organization’s ability to continue as a going concern and to provide related footnote disclosures.  ASU 2014-15 is effective for the Company in the year ended December 31, 2016, and interim periods beginning March 31, 2017, with early application permitted. The Company does not anticipate a material impact to the financial statements once implemented.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Not applicable

14

Item 8.  Financial Statements

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders

IKONICS Corporation

We have audited the accompanying balance sheets of IKONICS Corporation as of December 31, 2014 and 2013, and the related statements of income, stockholders’ equity, and cash flows for the years then ended.  These financial statements are the responsibility of the Company’s management.  Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement.  The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting.  Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting.  Accordingly, we express no such opinion.  An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of IKONICS Corporation as of December 31, 2014 and 2013, and the results of its operations and its cash flows for the years then ended, in conformity with U.S. generally accepted accounting principles.

/s/ McGladrey LLP

Minneapolis, Minnesota

March 5, 2015

15

IKONICS CORPORATION

BALANCE SHEETS

DECEMBER 31, 2014 AND 2013

	2014		2013
ASSETS
CURRENT ASSETS:
Cash and cash equivalents (Note 7)	$	1,936,214	$	1,704,300
Short-term investments	1,766,000		1,464,878
Trade receivables, less allowance of $49,000 in 2014 and $62,000 in 2013 (Notes 5, 7, and 8)	2,096,328		2,050,853
Inventories (Note 8)	2,630,650		2,554,942
Prepaid expenses and other assets	86,400		103,687
Income tax receivable	163,651		16,400
Deferred income taxes (Note 2)	178,000		150,000
Total current assets	8,857,243		8,045,060
PROPERTY, PLANT, AND EQUIPMENT, at cost:
Land and buildings	6,247,781		6,123,890
Machinery and equipment	3,956,561		3,781,282
Office equipment	754,220		722,567
Vehicles	247,356		237,194
	11,205,918		10,864,933
Less accumulated depreciation	5,789,070		5,230,837
	5,416,848		5,634,096
INTANGIBLE ASSETS, less accumulated amortization of $198,918 in 2014 and $173,143 in 2013 (Note 3)	353,871		322,647
	$	14,627,962	$	14,001,803

See notes to financial statements.

16

IKONICS CORPORATION

BALANCE SHEETS

DECEMBER 31, 2014 AND 2013

	2014		2013
LIABILITIES AND STOCKHOLDERS’ EQUITY
CURRENT LIABILITIES:
Accounts payable	$	371,181	$	532,294
Accrued compensation	294,706		274,936
Other accrued liabilities	78,610		67,755
Total current liabilities	744,497		874,985
DEFERRED INCOME TAXES (Note 2)	545,000		527,000
Total liabilities	1,289,497		1,401,985
COMMITMENTS AND CONTINGENCIES
STOCKHOLDERS’ EQUITY:
Preferred stock, par value $.10 per share; authorized 250,000 shares: issued none	—		—
Common stock, par value $.10 per share; authorized 4,750,000 shares: issued and outstanding 2,018,253 shares in 2014 and 2,012,170 shares in 2013 (Note 6)	201,825		201,217
Additional paid-in capital	2,681,307		2,592,038
Retained earnings	10,455,333		9,806,563
Total stockholders’ equity	13,338,465		12,599,818
	$	14,627,962	$	14,001,803

See notes to financial statements.

17

IKONICS CORPORATION

STATEMENTS OF INCOME

YEARS ENDED DECEMBER 31, 2014 AND 2013

	2014		2013
NET SALES	$	18,489,837	$	17,491,408
COST OF GOODS SOLD	11,786,608		10,553,553
GROSS PROFIT	6,703,229		6,937,855
SELLING, GENERAL AND ADMINSTRATIVE EXPENSES	5,124,764		5,368,400
RESEARCH AND DEVELOPMENT EXPENSES	664,999		649,325
	5,789,763		6,017,725
INCOME FROM OPERATIONS	913,466		920,130
OTHER	5,304		7,043
INCOME BEFORE INCOME TAXES	918,770		927,173
FEDERAL AND STATE INCOME TAXES (Note 2)	270,000		245,000
NET INCOME	$	648,770	$	682,173
EARNINGS PER COMMON SHARE:
Basic	$	0.32	$	0.34
Diluted	$	0.32	$	0.34
WEIGHTED AVERAGE COMMON SHARES:
Basic	2,017,144		2,006,843
Diluted	2,018,334		2,010,659

See notes to financial statements.

18

IKONICS CORPORATION

STATEMENTS OF STOCKHOLDERS’ EQUITY

YEARS ENDED DECEMBER 31, 2014 AND 2013

								Total
				Additional				Stock-
	Common Stock			Paid-in		Retained		holders’
	Shares	Amount		Capital		Earnings		Equity
BALANCE AT DECEMBER 31, 2012	1,998,475	$	199,848	$	2,470,507	$	9,124,390	$	11,794,745
Net income	—	—		—		682,173		682,173
Exercise of stock options	13,695	1,369		88,029		—		89,398
Tax benefit resulting from stock option exercises	—	—		19,595		—		19,595
Stock based compensation and related tax benefit	—	—		13,907		—		13,907
BALANCE AT DECEMBER 31, 2013	2,012,170	201,217		2,592,038		9,806,563		12,599,818
Net income	—	—		—		648,770		648,770
Exercise of stock options	6,083	608		45,379		—		45,987
Tax benefit resulting from stock option exercises	—	—		25,475		—		25,475
Stock based compensation and related tax benefit	—	—		18,415		—		18,415
BALANCE AT DECEMBER 31, 2014	2,018,253	$	201,825	$	2,681,307	$	10,455,333	$	13,338,465

See notes to financial statements.

19

IKONICS CORPORATION

STATEMENTS OF CASH FLOWS

YEARS ENDED DECEMBER 31, 2014 AND 2013

	2014			2013
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income	$	648,770		$	682,173
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation	635,607			568,791
Amortization	25,775			53,314
Stock based compensation	18,415			13,907
Net gain on disposal of property, plant and equipment	(45,659		)	(13,979		)
Deferred income taxes	(10,000		)	153,000
Changes in operating assets and liabilities:
Trade receivables	(45,475		)	9,459
Inventories	(75,708		)	123,922
Prepaid expenses and other assets	17,287			21,296
Income tax receivable	(121,776		)	(16,400		)
Accounts payable	(161,113		)	(61,628		)
Accrued liabilities	30,625			(4,766		)
Income taxes payable	—			(62,557		)
Net cash provided by operating activities	916,748			1,466,532
CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of property and equipment	(434,463		)	(762,537		)
Proceeds from disposal of property, plant and equipment	61,763			35,507
Purchases of intangibles	(56,998		)	(70,604		)
Purchases of short-term investments	(2,716,000		)	(1,814,878		)
Proceeds from sale of short-term investments	2,414,877			1,792,939
Net cash used in investing activities	(730,821		)	(819,573		)
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from exercise of stock options	45,987			89,398
NET INCREASE IN CASH AND CASH EQUIVALENTS	231,914			736,357
CASH AND CASH EQUIVALENTS AT BEGINNING OF YEAR	1,704,300			967,943
CASH AND CASH EQUIVALENTS AT END OF YEAR	$	1,936,214		$	1,704,300
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION
Cash paid for income taxes, net of taxes received of $13,026 in 2013	$	401,776		$	171,139

See notes to financial statements.

20

IKONICS CORPORATION

NOTES TO FINANCIAL STATEMENTS

YEARS ENDED DECEMBER 31, 2014 AND 2013

1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Description of Business and Foreign Export Sales - IKONICS Corporation’s (the Company) traditional business has been the development and manufacturing of high-quality photochemical imaging systems for sale primarily to a wide range of printers and decorators of surfaces.  Customers’ applications are primarily screen printing and abrasive etching.  These sales have been augmented with inkjet receptive films, ancillary chemicals and related equipment to provide a full line of products and services to its customers.  In 2006, the Company began a major effort to diversify and expand its business to industrial markets. These efforts now include the Company’s Advanced Material Solutions (AMS) business unit, formerly named Micro-Machining, which uses the Company’s proprietary process and photoresist film for the abrasive etching of composite materials, industrial ceramics, silicon wafers, and glass wafers.  The customer base for AMS is primarily the aerospace and electronics industries.  Based on its expertise in ultraviolet curable fluids and inkjet receptive substrates, the Company has also developed a patented digital texturing technology (DTX) for putting patterns and textures into steel molds for the plastic injection molding industry. The ultimate original equipment manufacturer (“OEM”) for the Company’s DTX technology is primarily the automotive industry. The Company offers a suite of products to the mold making industry.  Industrial inkjet printers, which are integral to the DTX system, are manufactured and sold by a strategic partner.  The Company’s business plan is to sell consumable fluids and transfer films.  For most markets these sales are direct to the mold maker.  The DTX technology is being expanded to prototyping where the Company’s technology offers a unique combination of high definition and large format prints.  The Company’s principal markets are throughout the United States.  In addition, the Company sells to Europe, Latin America, Asia, and other parts of the world.  The Company extends credit to its customers, all on an unsecured basis, on terms that it establishes for individual customers.

Foreign export sales approximated 28.4% of net sales in 2014 and 32.3% of net sales in 2013.  The Company’s trade receivables at December 31, 2014 and 2013 due from foreign customers were 30.6% and 32.5% of total trade receivables, respectively.  The foreign export receivables are composed primarily of open credit arrangements with terms ranging from 30 to 90 days.  No single customer or foreign country represented greater than 10% of net sales in 2014 or in 2013.

The Company considers events or transactions that occur after the balance sheet date but before the financial statements are issued to provide additional evidence relative to certain estimates or to identify matters that require additional disclosure.

A summary of the Company’s significant accounting policies follows:

Cash Equivalents - The Company considers all highly liquid debt instruments purchased with a maturity of three months or less to be cash equivalents.  Cash equivalents consist of money market funds in which the carrying value approximates market value because of the short maturity of these instruments.  The money market fund utilized by IKONICS invests in United States dollar denominated securities that present minimal credit risk and consist of investments in debt securities issued or guaranteed by the United States government or by United States government agencies or instrumentalities and repurchase agreements fully collateralized by the United States Treasury and United States government securities.

Short-Term Investments - Short-term investments consist of fully insured certificates of deposit with original maturities ranging from four to twelve months as of December 31, 2014 and 2013, respectively.

Trade Receivables — Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on an on-going basis.  Management determines the allowance for doubtful accounts by regularly evaluating individual customer receivables and considering a customer’s financial condition, credit history, and current economic conditions.  Trade receivables are written off when deemed uncollectible.  Recoveries of trade receivables previously written off are recorded when received.  Accounts are considered past due if payment is not received according to agreed-upon terms.

A small percentage of the trade receivables balance is denominated in a foreign currency with no concentration in any given country.  At the end of each reporting period, the Company analyzes the receivable balance for customers paying in a foreign currency. These balances are adjusted to each quarter or year-end spot rate in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standard Codification (“ASC”) No. 830, Foreign Currency Matters.  Foreign currency transactions and translation adjustments did not have a significant effect on the Balance Sheet or the Statements of Income, Stockholders’ Equity and Cash Flows for 2014 and 2013.

21

Inventories - Inventories are stated at the lower of cost or market using the last-in, first-out (LIFO) method.  If the first-in, first-out (FIFO) cost method had been used, inventories would have been approximately $1,315,000 and $1,248,000 higher than reported at December 31, 2014 and 2013, respectively.  The inventory reserve for obsolescence was $11,000 and $15,000 at December 31, 2014 and 2013, respectively.  The major components of inventories are as follows:

	2014			2013
Raw materials	$	2,020,151		$	1,952,398
Work-in-progress	407,964			389,501
Finished goods	1,517,151			1,461,264
Reduction to LIFO cost	(1,314,616		)	(1,248,221		)
Total inventories	$	2,630,650		$	2,554,942

Property, Plant and Equipment — Major expenditures extending the life of the property, plant and equipment are capitalized.  Repair and maintenance costs are expensed in the period in which they are incurred.  Depreciation of property, plant and equipment is computed using the straight-line method over the following estimated useful lives:

	Years
Buildings	15-40
Machinery and equipment	5-10
Office equipment	3-10
Vehicles	3

Intangible Assets — Intangible assets consist of patents, licenses and covenants not to compete arising from business acquisitions.  Intangible assets are amortized on a straight-line basis over their estimated useful lives or agreement terms.  To the extent the undiscounted cash flows are less than the carrying value, analysis is performed based on several criteria, including, but not limited to, revenue trends, discounted operating cash flows and other operating factors to determine the impairment amount.

As of December 31, 2014, the remaining estimated weighted average useful lives of intangible assets are as follows:

	Years
Patents	13.4
Licenses	2.7
Non-compete agreements	0.5

Impairment of Long-lived Assets — The Company reviews its long-lived assets, including property, plant and equipment and intangible assets, for impairment when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets’ carrying amount. Any impairment loss recorded is measured as the amount by which the carrying value of the assets exceeds the fair value of the assets. To date, the Company has determined that no impairment of long-lived assets exists.

Fair Value of Financial Instruments — The carrying amounts of financial instruments, including cash and cash equivalents, short-term investments, trade receivables, accounts payable, and accrued liabilities approximate fair value due to the short maturities of these instruments.

Revenue Recognition — The Company recognizes revenue on sales of products when title passes which can occur at the time of shipment or when the goods arrive at the customer location depending on the agreement with the customer.  The Company sells its products to both distributors and end-users.  Sales to distributors and end-users are recorded based upon the criteria governed by the sales, delivery, and payment terms stated on the invoices from the Company to the purchaser.  In addition to transfer of title / risk of loss, all revenue is recorded in accordance with the criteria outlined within SAB 104 and FASB ASC 605 Revenue Recognition:

(a) persuasive evidence of an arrangement (principally in the form of customer sales orders and the Company’s sales invoices, as generally there is no other formal agreement underlying the sale transactions)

22

(b) delivery and performance (evidenced by proof of delivery, e.g. the shipment of film and substrates with bill of lading used for proof of delivery for FOB shipping point terms, and the carrier booking confirmation report used for FOB destination terms.  Once the finished product is shipped and physically delivered under the terms of the invoice and sales order, the Company has no additional performance or service obligations to complete)

(c) a fixed and determinable sales price (the Company’s pricing is established and is not based on variable terms, as evidenced in either the Company’s invoices or the limited number of distribution agreements; the Company rarely grants extended payment terms and has no history of concessions)

(d) a reasonable likelihood of payment (the Company’s terms are standard, and the Company does not have a substantial history of customer defaults or non-payment)

Sales are reported on a net basis by deducting credits, estimated normal returns and discounts.  The Company’s return policy does not vary by geography.  The customer has no rotation or price protection rights and the Company is not under a warranty obligation.  Freight billed to customers is included in sales.  Shipping costs are included in cost of goods sold.

Deferred Taxes - Deferred taxes are provided on a liability method whereby deferred tax assets are recognized for deductible temporary differences and operating loss and tax credit carryforwards and deferred tax liabilities are recognized for taxable temporary differences.  Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases.  Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will not be realized.  Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.  The Company follows the accounting standard on accounting for uncertainty in income taxes, which addresses the determination of whether tax benefits claimed or expected to be claimed on a tax return should be recorded in the financial statements.  Under this guidance, the Company may recognize the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by taxing authorities, based on the technical merits of the position.  The tax benefits recognized in the financial statements from such a position are measured based on the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement.  The guidance on accounting for uncertainty in income taxes also addresses derecognition, classification, interest and penalties on income taxes, and accounting in interim periods.

Earnings Per Common Share (EPS) - Basic EPS is calculated using net income divided by the weighted average of common shares outstanding.  Diluted EPS is similar to Basic EPS except that the weighted average number of common shares outstanding is increased to include the number of additional common shares, when dilutive, that would have been outstanding if the potential dilutive common shares, such as those shares subject to options, had been issued.

Shares used in the calculation of diluted EPS are summarized below:

	2014	2013
Weighted average common shares outstanding	2,017,144	2,006,843
Dilutive effect of stock options	1,190	3,816
Weighted average common and common equivalent shares outstanding	2,018,334	2,010,659

At December 31, 2014, options to purchase 1,250 shares of common stock with a weighted average exercise price of $28.25 were outstanding, but were excluded from the computation of common share equivalents because they were anti-dilutive.  There were no anti-dilutive options at December 31, 2013.

Employee Stock Plan - The Company accounts for employee stock options under the provision of ASC 718 Compensation — Stock Compensation.

Recent Accounting Pronouncemnts - In May 2014, the FASB issued Accounting Standards Update (“ASU”) No. 2014-09, Revenue from Contracts with Customers.  ASU 2014-09 supersedes the revenue recognition requirements in Revenue Recognition (Topic 605), and requires entities to recognize revenue in a way that depicts the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled to in exchange for those goods or services. ASU 2014-09 is effective for the Company in our fiscal year beginning on January 1, 2017, including interim periods within that reporting period and is to be applied retrospectively, with early application not permitted.  The

23

Company is currently evaluating the effect that adopting this new accounting guidance will have on our consolidated results of operations, cash flows and financial position.

In August 2014, FASB issued ASU No. 2014-15, Presentation of Financial Statements—Going Concern (Subtopic 205-40): Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern, intended to define management’s responsibility to evaluate whether there is substantial doubt about an organization’s ability to continue as a going concern and to provide related footnote disclosures.  ASU 2014-15 is effective for the Company in the year ended December 31, 2016, and interim periods beginning March 31, 2017, with early application permitted. The Company does not anticipate a material impact to the financial statements once implemented.

Use of Estimates - The preparation of the financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Actual results could differ from those estimates.  Significant estimates include the allowance for doubtful trade receivables, the reserve for inventory obsolescence, and the valuation allowance for deferred tax assets.

2. INCOME TAXES

Income tax expense for the years ended December 31, 2014 and 2013 consists of the following:

	2014			2013
Current:
Federal	$	332,000		$	91,000
State	15,000			1,000
	347,000			92,000
Deferred	(77,000		)	153,000
	$	270,000		$	245,000

The expected provision for income taxes, computed by applying the U.S. federal income tax rate of 34% in 2014 and 34% in 2013 to income before taxes, is reconciled to income tax expense as follows:

	2014			2013
Expected provision for federal income taxes	$	312,000		$	315,000
State income taxes, net of federal benefit	15,000			16,000
Domestic manufacturers deduction	(33,000		)	(20,000		)
Non-deductible meals, entertainment, and life insurance	21,000			13,000
Prior year adjustments	(1,000		)	(32,000		)
Research and development credit	(31,000		)	(45,000		)
Valuation allowance released on capital loss utilized	(17,000		)	—
Other	4,000			(2,000		)
	$	270,000		$	245,000

Net deferred tax liabilities consist of the following as of December 31, 2014 and 2013:

	2014			2013
Deferred tax assets:
Accrued vacation	$	23,000		$	23,000
Inventories reserve	129,000			105,000
Allowance for doubtful accounts	4,000			9,000
Allowance for sales returns	13,000			13,000
Capital loss carryforward	—			309,000
Research and development credit carryforward	30,000			17,000
Accrued self-insured medical	9,000			—
Less valuation allowance	(30,000		)	(326,000		)
	178,000			150,000
Deferred tax liabilities:
Property and equipment	(462,000		)	(468,000		)
Intangible assets	(83,000		)	(59,000		)
Net deferred tax liabilities	$	(367,000	)	$	(377,000	)

24

The deferred tax amounts described above have been included in the accompanying balance sheet as of December 31, 2014 and 2013 as follows:

	2014			2013
Current Assets	$	178,000		$	150,000
Noncurrent liabilities	(545,000		)	(527,000		)
	$	(367,000	)	$	(377,000	)

At December 31, 2013, the Company’s valuation allowance of $326,000 related to a capital loss carryforward of $309,000 and a Minnesota research and development credit of $17,000.  During the fourth quarter of 2014, the Company reversed $17,000 of the valuation allowance related to utilized capital loss carryforwards and wrote off the remaining $292,000 of capital loss carryforward that expired in the current year.  The remaining valuation allowance balance of $30,000 at December 31, 2014 relates entirely to Minnesota research and development credit carryforwards that the Company does not expect to utilize and begin to expire in 2028.

It has been the Company’s policy to recognize interest and penalties related to uncertain tax positions in income tax expense.  As of December 31, 2014 and 2013, there was no liability for unrecognized tax benefits.

The Company is subject to federal and state taxation.  The material jurisdictions that are subject to examination by tax authorities primarily include Minnesota and the United States, for tax years 2011, 2012, 2013 and 2014.

3. INTANGIBLE ASSETS

Intangible assets consist of patents, patent applications, licenses and covenants not to compete arising from business acquisitions.  Capitalized patent application costs are included with patents.  Intangible assets are amortized on a straight-line basis over their estimated useful lives or terms of their agreement, whichever is shorter.  There were no impairment adjustments to intangible assets during the years ended December 31, 2014 or 2013.

Intangible assets at December 31, 2014 and 2013 consist of the following:

	December 31, 2014					December 31, 2013
	Gross Carrying		Accumulated			Gross Carrying		Accumulated
	Amount		Amortization			Amount		Amortization
Amortized intangible assets:
Patents	$	402,789	$	(62,676	)	$	345,790	$	(46,692	)
Licenses	50,000		(39,584		)	50,000		(36,459		)
Non-compete agreements	100,000		(96,658		)	100,000		(89,992		)
	$	552,789	$	(198,918	)	$	495,790	$	(173,143	)

	2014		2013
Aggregate amortization expense:
For the years ended December 31	$	25,775	$	53,314

Estimated amortization expense for the years ending December 31:

2015	$	23,000
2016	20,000
2017	20,000
2018	18,000
2019	16,000

25

In connection with the license agreement, the Company has agreed to pay royalties ranging from 3% to 5% on the sales of products subject to the agreements.  The Company incurred $16,000 of expense under these agreements during 2014, and $19,000 during 2013 which have been included in selling, general and administrative expenses in the Statements of Income.

4. RETIREMENT PLAN

The Company has established a salary deferral plan under Section 401(k) of the Internal Revenue Code.  Such deferrals accumulate on a tax-deferred basis until the employee withdraws the funds.  The Company contributes up to 5% of each eligible employee’s compensation.  Total retirement expense for the years ended December 31, 2014 and 2013 was approximately $213,000 and $208,000, respectively.

5. SEGMENT INFORMATION

The Company’s reportable segments are strategic business units that offer different products and have varied customer bases.  There are five reportable segments:  Domestic, Export, IKONICS Imaging, Digital Texturing (DTX) and AMS.  Domestic sells screen printing film, emulsions, and inkjet receptive film to distributors located in the United States and Canada.  IKONICS Imaging sells photo resistant film, art supplies, glass, metal medium and related abrasive etching equipment to end user customers located in the United States and Canada.  AMS provides sound deadening technology to the aerospace industry along with products and services for etched composites, ceramics, glass and silicon wafers.  DTX includes products and customers related to patented and proprietary inkjet technology used for mold texturing and prototyping.  Export sells primarily the same products as Domestic and the IKONICS Imaging products not related to AMS or DTX.  The accounting policies of the segments are the same as those described in the summary of significant accounting policies included in Note 1.

Management evaluates the performance of each segment based on the components of divisional income, and does not allocate assets and liabilities to segments except for trade receivables.  Financial information with respect to the reportable segments follows:

For the year ended December 31, 2014:

					IKONICS
	Domestic		Export		Imaging		DTX			AMS			Unalloc.			Total
Net sales	$	7,846,457	$	5,249,843	$	4,644,082	$	422,646		$	326,809		$	—		$	18,489,837
Cost of goods sold	4,571,505		3,840,948		2,167,870		365,828			840,457			—			11,786,608
Gross profit (loss)	3,274,952		1,408,895		2,476,212		56,818			(513,648		)	—			6,703,229
Selling general and adminstrative*	1,353,509		549,254		918,337		166,724			425,087			1,711,853			5,124,764
Research and development*	—		—		—		—			—			664,999			664,999
Income (loss) from operations	$	1,921,443	$	859,641	$	1,557,875	$	(109,906	)	$	(938,735	)	$	(2,376,852	)	$	913,466

For the year ended December 31, 2013:

					IKONICS
	Domestic		Export		Imaging		DTX			AMS			Unalloc.			Total
Net sales	$	7,260,934	$	5,641,544	$	3,836,762	$	407,193		$	344,975		$	—		$	17,491,408
Cost of goods sold	4,062,141		4,057,111		1,831,047		70,343			532,911			—			10,553,553
Gross profit (loss)	3,198,793		1,584,433		2,005,715		336,850			(187,936		)	—			6,937,855
Selling general and adminstrative*	1,307,154		578,084		977,574		474,782			446,803			1,584,003			5,368,400
Research and development*	—		—		—		—			—			649,325			649,325
Income (loss) from operations	$	1,891,639	$	1,006,349	$	1,028,141	$	(137,932	)	$	(634,739	)	$	(2,233,328	)	$	920,130

* The Company does not allocate all general and administrative expenses or any research and development expenses to its operating segments for internal reporting.

26

Trade receivables by segment as of December 31, 2014 and December 31, 2013 were as follows:

	Dec 31, 2014			Dec 31, 2013
Domestic	$	1,068,170		$	1,012,057
Export	640,464			667,343
IKONICS Imaging	254,483			339,537
DTX	86,507			26,910
AMS	85,170			40,222
Unallocated	(38,466		)	(35,216		)
Total	$	2,096,328		$	2,050,853

6. STOCK OPTIONS

The Company has a stock incentive plan for the issuance of up to 442,750 shares of common stock.  The plan provides for granting eligible participants stock options or other stock awards, as described by the plan, at option prices ranging from 85% to 110% of fair market value at date of grant.  Options granted expire up to seven years after the date of grant.  Such options generally become exercisable over a three year period.  A total of 115,989 shares of common stock are reserved for additional grants of options under the plan at December 31, 2014.

Under the plan, the Company charged compensation cost of $18,415 and $13,907 against income in 2014 and 2013, respectively.

As of December 31, 2014, there was approximately $20,000 of unrecognized compensation cost related to unvested share-based compensation awards granted which is expected to be recognized over the next three years.

Proceeds from the exercise of stock options were $45,987 for 2014 and $89,398 for 2013.

The fair value of options granted during 2014 and 2013 were estimated using the Black-Scholes option pricing model with the following assumptions:

	2014	2013
Dividend yield	0%	0%
Expected volatility	44.3%	43.9%
Expected life of option	Five Years	Five Years
Risk-free interest rate	1.7%	0.7%
Fair value of each option on grant date	$11.49	$4.72

There were 1,250 options and 4,250 options granted during 2014 and 2013, respectively.

FASB ASC 718, Compensation — Stock Compensation specifies that initial accruals be based on the estimated number of instruments for which the requisite service is expected to be rendered.  Therefore, the Company is required to incorporate a preexisting forfeiture rate based on the historical forfeiture experience and prospective actuarial analysis, estimated at 3%.

A summary of the status of the Company’s stock option plan as of December 31, 2014 and changes during the year then ended is presented below:

Options	Shares		Weighted Average Exercise Price		Weighted Average Remaining Contractual Term (years)	Aggregate Intrinsic Value
Outstanding at January 1, 2014	11,417		$	8.87
Granted	1,250		28.25
Exercised	(6,083	)	7.56
Expired and forfeited	(1,666	)	7.77
Outstanding at December 31, 2014	4,918		$	15.78	3.31	$	33,126
Vested or expected to vest at December 31, 2014	4,918		$	15.78	3.31	$	33,126
Exercisable at December 31, 2014	916		$	9.81	2.23	$	9,846

27

The weighted-average grant date fair value of options granted was $11.49 and $4.72 for the years ended December 31, 2014 and 2013, respectively.  The total intrinsic value of options exercised was $107,639 for the year ended December 31, 2014 and $95,477 for the year ended December 31, 2013.

There were 3,000 shares of restricted stock granted and subsequently forfeited, prior to vesting, during the year ended December 31, 2014.  There were no restricted stock grants during the year ended December 31, 2013.

Restricted stock activity during the nine months ended December 31, 2014 was as follows:

	Shares	Weighted Average Price
Outstanding at January 1, 2014	—	$	—
Granted	3,000	28.25
Forfeited	3,000	28.25
Outstanding at December 31, 2014	—	$	—

7. CONCENTRATION OF CREDIT RISK

The Company maintains its cash balances primarily in two financial institutions.  As of December 31, 2014, the balance at each of the institutions exceeded the Federal Deposit Insurance Corporation coverage.

Trade receivables are financial instruments that also expose the Company to concentration of credit risk.  The large number of customers comprising the Company’s customer base and their dispersion across different geographic areas limits such exposure. In addition, the Company routinely assesses the financial strength of its customers and maintains an allowance for doubtful accounts that management believes will adequately provide for credit losses.

8. LINE OF CREDIT

The Company has a $1,250,000 bank line of credit that provides for working capital financing.  This line of credit is subject to renewal on May 31, 2015, is collateralized by trade receivables and inventories, and bears interest at 2.5 percentage points over 30-day LIBOR.  There were no outstanding borrowings under this line of credit at December 31, 2014 and 2013.  There are no financial covenants related to the line of credit.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

Item 9A. Controls and Procedures

Disclosure Controls and Procedures. As of December 31, 2014, an evaluation was carried out under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)). Based upon that evaluation, the Chief Executive Officer and the Chief Financial Officer concluded that the design and operation of these disclosure controls and procedures were effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in applicable rules and forms.

Management’s Annual Report on Internal Control Over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f ) under the Exchange Act. Our internal control system is designed to provide reasonable assurance to our management and board of directors regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that:

·Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company;

28

·Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and

·Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2014. In making this assessment, management used the 2013 criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework. Based on management’s assessment and those criteria, management believes that, as of December 31, 2014, the Company maintained effective internal control over financial reporting.

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Our management’s report of the effectiveness on the design and operation of our internal control over financial reporting was not subject to attestation by the Company’s registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this annual report.

Changes in Internal Control Over Financial Reporting. There was no change in the Company’s internal control over financial reporting identified in connection with the evaluation required by Rule 13a-15(d) and Rule 15d-15(d) of the Exchange Act that occurred during the period covered by this report and that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

Item 9B. Other Information

None.

PART III

Item 10.  Directors and Executive Officers of the Registrant

The information to be included in the Company’s definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions “Election of Directors,” “Executive Officers” and “Section 16(a) Beneficial Ownership Reporting Compliance” is incorporated by reference.  The following information completes the Company’s response to this Item 10.

The Company has adopted a code of ethics that applies to the Company’s Chief Executive Officer, Chief Financial Officer, Controller and other employees performing similar functions.  This code of ethics is filed as Exhibit 14 to this report.  The Company intends to satisfy the disclosure requirement under Item 5.05 of Form 8-K regarding an amendment to, or a waiver from, this code of ethics by posting such information on its Web site which is located at www.ikonics.com.

Item 11.  Executive Compensation

The information to be included in the Company’s definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions “Election of Directors—Director Compensation,” “Summary Compensation Table,” “Outstanding Equity Awards at Fiscal Year-End” and “Employment Contracts; Termination of Employment and Change-In-Control Arrangements” is incorporated by reference.

Item 12.  Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information to be included in the Company’s definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions “Security Ownership of Principal Shareholders and Management” and “Equity Compensation Plan Information” is incorporated by reference.

Item 13.  Certain Relationships and Related Transactions, and Director Independence

The information to be included in the Company’s definitive proxy statement for the 2015 Annual Meeting of Shareholders under the caption “Election of Directors” is incorporated by reference.  The Company has not engaged in any transaction since the beginning of its last fiscal year and does not currently propose to engage in any transaction required to be disclosed pursuant to Item 404 of Regulation S-K.

Item 14.  Principal Accountant Fees and Services

The information to be included in the Company’s definitive proxy statement for the 2015 Annual Meeting of Shareholders under the caption “Principal Accounting Firm Fees” is incorporated by reference.

29

Item 15.  Exhibits and Financial Statement Schedules

(a)(1) The following financial statements of the Company are filed as part of this Annual Report on Form 10-K;

(i) Report of McGladrey LLP, independent registered public accounting firm

(ii) Balance Sheets as of December 31, 2014 and 2013

(iii) Statements of Income for the years ended December 31, 2014 and 2013

(iv) Statements of Stockholders’ Equity for the years ended December 31, 2014 and 2013

(v) Statements of Cash Flows for the years ended December 31, 2014 and 2013

(vi) Notes to the Financial Statements

(b) The following exhibits are filed as part of this Annual Report on Form 10-K for the fiscal year ended December 31, 2014:

Exhibit	Description
3.1	Restated Articles of Incorporation of Company, as amended. (Incorporated by reference to the like numbered Exhibit to the Company’s Registration Statement on Form 10-SB filed with the Commission on April 7, 1999 (Registration No. 000-25727)).
3.2	By-Laws of the Company, as amended. (Incorporated by reference to the like numbered Exhibit to the Company’s Current Report on Form 8-K filed with the Commission on February 22, 2007 (File No. 000-25727)).
4	Specimen of Common Stock Certificate. (Incorporated by reference to the like numbered Exhibit to Amendment No. 1 to the Company’s Registration Statement on Form 10-SB filed with the Commission on May 26, 1999 (Registration No. 000-25727)).
10.1*	IKONICS Corporation 1995 Stock Incentive Plan, as amended. (Incorporated by reference to the like numbered Exhibit to the Company’s Annual Report on Form 10-K filed with the Commission on March 3, 2011 (File No. 000-25727)).
10.2	Confidentiality Agreement, dated March 11, 2013, between the Company and Joseph R. Nerges. (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed with the Commission on March 13, 2013 (File No. 000-25727)).
14	Code of Ethics. (Incorporated by reference to the like numbered Exhibit to the Company’s Annual Report on Form 10-KSB for the year ended December 31, 2003 (File No. 000-25727)).
23	Consent of Independent Registered Public Accounting Firm.
24	Powers of Attorney.
31.1	Rule 13a-14(a)/15d-14(a) Certifications of CEO.
31.2	Rule 13a-14(a)/15d-14(a) Certifications of CFO.
32	Section 1350 Certifications.
101	Interactive data files pursuant to Rule 405 of Regulation S-T.**

* Management contract or compensatory plan, contract or arrangement required to be filed as an exhibit to this Annual Report on Form 10-K.

** In accordance with Rule 406T of Regulation S-T, the XBRL related information in Exhibit 101 to this Annual Report on Form 10-K is deemed not filed or part of a registration statement or prospectus for purposes of Section 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended, and otherwise is not subject to liability under those sections.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on March 5, 2015.

IKONICS CORPORATION
By	/s/ William C. Ulland
	William C. Ulland, Chairman, Chief Executive Officer
	and President

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on March 5, 2015.

/s/ William C. Ulland

William C. Ulland, Chairman, Chief Executive Officer

and President

(Principal Executive Officer)

30

/s/ Jon Gerlach

Jon Gerlach, Chief Financial Officer

and Vice President of Finance

(Principal Financial and Accounting Officer)

Rondi Erickson*	Director
H. Leigh Severance*	Director
Gerald W. Simonson*	Director
Lockwood Carlson*	Director
David O. Harris*	Director
Ernest M. Harper Jr.*	Director
Darrell B. Lee*	Director

*William C. Ulland, by signing his name hereto, does hereby sign this document on behalf of each of the above named Directors of the registrant pursuant to powers of attorney duly executed by such persons.

/s/ William C. Ulland

William C. Ulland, Attorney-in-Fact

31

INDEX TO EXHIBITS

Exhibit	Description	Page
3.1	Restated Articles of Incorporation of Company, as amended	Incorporated by Reference
3.2	By-Laws of the Company, as amended.	Incorporated by Reference
4	Specimen of Common Stock Certificate	Incorporated by Reference
10.1	IKONICS Corporation 1995 Stock Incentive Plan, as amended	Incorporated by Reference
10.2	Confidentiality Agreement, dated March 11, 2013, between the Company and Joseph R. Nerges	Incorporated by Reference
14	Code of Ethics	Incorporated by Reference
23	Consent of Independent Registered Public Accounting Firm	Filed Electronically
24	Powers of Attorney	Filed Electronically
31.1	Rule 13a-14(a)/15d-14(a) Certifications of CEO	Filed Electronically
31.2	Rule 13a-14(a)/15d-14(a) Certifications of CFO	Filed Electronically
32	Section 1350 Certifications	Filed Electronically
101	Interactive data files pursuant to Rule 405 of Regulation S-T	Filed Electronically

32