Wifimed 10QSB 2005 Q3 Quarterly report (small business)

SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-QSB

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF
THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 30, 2005

 000-49707

Commission file number

BELLACASA PRODUCTIONS, INC.

(Exact name of small business issuer as specified in its charter)

Nevada	58-2412118
(State of incorporation)	(IRS Employer Identification Number)

26 Chestnut St., Suite 2L

Andover, MA 01810

(Address of principal executive office)

1250 Virginia Drive, Suite 1000

Fort Washington, PA 19034

(Former address of principal executive office)

(978) 470-3595 x 105

(Issuer's telephone number)

Check whether the issuer:

(1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports)
Yes [X] No [   ]

and

(2) has been subject to such filing requirements for the past 90 days.
Yes [X] No [  ]

Applicable only to corporate issuers

As of November 11, 2005 (the most recent practicable date), there were 38,214,648 shares of the issuer's Common Stock, $0.0001 par value per share, outstanding.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [X]

Transitional Small Business Disclosure Format (check one)
Yes [  ] No [X]

BELLACASA PRODUCTIONS, INC. FORM 10-QSB TABLE OF CONTENTS
PART I	FINANCIAL INFORMATION
Item 1	Financial Statements
	Consolidated Balance Sheet
	Statements of Operations
	Statements of Cash Flows
	Notes to Financial Statements
Item 2	Management's Discussion and Analysis and Plan of Operation
Item 3	Controls and Procedures
PART II	OTHER INFORMATION
Item 2	Unregistered Sales of Equity Securities and Use of Proceeds
Item 5	Other Information
Item 6	Exhibits and Reports on Form 8-K
SIGNATURES

PART I 

   ITEM 1 - FINANCIAL STATEMENTS 

BELLACASA PRODUCTIONS, INC. AND SUBSIDIARY (a development stage company) Consolidated Balance Sheet (unaudited)
		September 30, 2005
Assets
Current assets:
Cash	$	176,892
Prepayments under product supply agreement		90,000
Total current assets		266,892
Property and equipment, net		828
Advances to related party		33,304
	$	301,024
Liabilities and Stockholders’ Equity
Current liabilities:
Trade accounts payable	$	40,885
Accrued expenses payable		13,500
Advances from stockholder		50,000
Total current liabilities		104,385
Long-term liabilities:
Convertible note payable-related party (net of $3,030 original issue discount)		86,970
Stockholders' equity:
Common stock, $.0001 par value
50,000,000 shares, authorized         38,214,648 shares, issued and outstanding		3,822
Preferred stock, $.0001 par value, authorized
25,000,000 shares, no shares issued and outstanding		0
Additional paid-in capital		596,094
Deficit accumulated during the development stage		(490,247	)
Total stockholders' equity		109,669
	$	301,024

See accompanying notes to financial statements.

BELLACASA PRODUCTIONS, INC.
(a development stage company)

Statements of Operations

		Successor Company Consolidated			Predecessor Company			Successor Company Consolidated			Predecessor Company			Successor Company Consolidated
		Three months ended September 30, 2005 (unaudited)			Three months ended September 30, 2004 (unaudited)			Nine months ended September 30, 2005 (unaudited)			Nine months ended September 30, 2004 (unaudited)			Period from February 4, 2000 (inception) through September 30, 2005 (unaudited)
Revenue	$	0		$	0		$	0		$	0		$	0
Costs and expenses:
General and administrative		2,471			8,513			31,774			8,513			315,442
Research and development		0			0			0			0			206,121
Depreciation		259			228			777			602			6,073
Interest, net of interest (income)		3,210			750			4,130			2,250			(2,698	)
Total costs and expenses		6,210			9,491			36,681			11,365			524,938
(Loss) before other income and income taxes		(6,210	)		(9,491	)		(36,681	)		(11,365	)		(524,938	)
(Income) from forgiveness of related party debt		0			0			0			(334,560	)		(34,691	)
(Loss) income before income taxes		(6,210	)		(9,491	)		(36,681	)		323,195			(490,247	)
Income taxes		0			0			0			0			0
(Deficit) income accumulated during       development stage	$	(6,210	)	$	(9,491	)	$	(36,681	)	$	323,195		$	(490,247	)
Basic and diluted income (loss) per share	$	(NIL	)	$	(NIL	)	$	(NIL	)	$	0.04
Weighted average number of shares outstanding		37,488,289			8,134,450			34,600,752			8,082,167

See accompanying notes to financial statements.

BELLACASA PRODUCTIONS, INC.
(a development stage company)
Statements of Cash Flows
		Successor Company (Consolidated)			Predecessor Company				Successor Company (Consolidated)
		Nine Months Ended September 30, 2005 (unaudited)			Nine Months Ended September 30, 2004 (unaudited)				Period from February 4, 2000 (inception) through September 30, 2005 (unaudited)
Cash flows from operating activities:
(Deficit) income accumulated during development stage	$	(36,681	)	$	323,195			$	(490,247	)
Adjustments to reconcile deficit accumulated during      development stage to net cash used in operating activities:
Depreciation		777			602				6,073
Amortization of discount of note payable - related party		500			0				500
Expenses paid by issuance of common stock		22,500			13				248,002
Gain on settlement of debts - related party		0			(334,560	)			0
Change in operating assets and liabilities:
Increase in prepaid expenses and other assets		(90,870	)		(10,506	)			(89,304	)
Increase in accounts payable and accrued expenses		5,600			(8,744	)			88,218
Net cash used in operating activities		(98,174	)		0				(236,758	)
Cash flows from investing activities:
Purchase of equipment		0			0				(6,900	)
Investment in company prior to consolidation		0			0				(30,000	)
Net cash used in investing activities		0			0				(36,900	)
Cash flows from financing activities:
Proceeds from issuance of common stock		185,000			0				219,550
Proceeds from issuance of preferred stock		0			0				175,000
Proceeds from note payable - related party		90,000			0		��		90,000
Loans to related parties		0			0				(73,500	)
Repayment of related party loans		0			0				39,500
Net cash provided by financing activities		275,000			0				450,550
Increase (decrease) in cash		176,826			0				176,892
Cash at beginning of period		66			0				0
Cash at end of period	$	176,892		$	0			$	176,892

See accompanying notes to financial statements.

BELLACASA PRODUCTIONS, INC.
(a development stage company)

Notes to Interim Consolidated Financial Statements
September 30, 2005
(unaudited)

Note 1 - Interim Financial Statements

            The interim consolidated financial statements of Bellacasa Productions, Inc. ("Bellacasa" or the "Company") include all adjustments, which, in the opinion of management, are necessary in order to make the financial statements not misleading. The financial statements have been presented in a "development stage" format. Since inception, the primary activities of the Company have been raising capital, obtaining financing and testing its primary products. The Company has not commenced its principal revenue producing activities. The accompanying unaudited financial statements have been prepared in accordance with the instructions to Form 10-QSB and do not include all of the information and footnotes required by Generally Accepted Accounting Principles in the United States for complete financial statements. The financial statements presented herein have been prepared in accordance with the accounting policies described in the Company's Decem ber 31, 2004 Annual Report on Form 10-KSB and should be read in conjunction with the Notes to financial statements which appear in that report.

Note 2 - Organization and Operations

            On January 26, 2005, Bellacasa Productions, Inc., a Nevada corporation, acquired all of the issued and outstanding capital stock of Aquamer, Inc., ("Aquamer") a development stage medical technology company. The transaction was completed in accordance with a stock purchase agreement dated November 15, 2004, as amended January 26, 2005. Pursuant to the terms of that agreement, Bellacasa issued 28,504,148 new shares of its common stock to the shareholders of Aquamer. Upon issuance of the new shares, the former shareholders of Aquamer owned approximately 78% of the outstanding shares of Bellacasa.

            Aquamer was formed as a Delaware corporation on February 4, 2000, for the purpose of developing medical products, using water-based tissue-bulking technology, for the fields of dermatology, gastroenterology and urology.

            Basis of Presentation

            For legal purposes, Bellacasa acquired all of the capital stock of Aquamer. For financial reporting purposes, however, Aquamer is deemed to be the acquiring company and the transaction was accounted for as a reverse takeover as Aquamer had more assets than Bellacasa; Aquamer shareholders acquired voting control of the acquiring company; and the former Aquamer president and chairman assumed working control as he replaced the former directors and officers of Bellacasa.   

            The September 30, 2005 financial statements contained herein are those of Aquamer carried forward at historical cost and are referred to as the financial statements of the "Successor Company." The results of operations and cash flows for the three months and nine months ended September 30, 2004 are those of Bellacasa Productions, Inc. prior to the acquisition and are referred to as the financial statements of the "Predecessor Company." The consolidated results and operations and cash flows for the three months and nine months ended September 30, 2005 and the consolidated results and operations since the inception date, February 4, 2000, include Aquamer's results of operations and cash flows and are referred to as financial statements of the "Successor Company."

            Principles of Consolidation

            The consolidated financial statements include the accounts of legal entities Bellacasa and its wholly owned subsidiary, Aquamer. All significant inter-company balances and transactions have been eliminated in consolidation including a pre-acquisition loan from Aquamer to Bellacasa in the amount of $30,000.

Note 3 - Summary of Significant Accounting Policies

            (a) Property and equipment

            Property and equipment are recorded at cost and depreciated over the estimated useful lives of the assets, which range from three to five years, using the straight-line method.

            (b) Income taxes

            Deferred tax assets and liabilities are recognized for the future tax consequences attributable to temporary differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carry-forwards.  Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled.  Changes in tax rates are recognized in the period that includes the enactment date.

            Development stage operations, from inception through September 30, 2005, resulted in net operating losses. Management has determined that it is more likely than not that the net operating loss carry-forwards will not be utilized; therefore a valuation allowance against the related deferred tax asset has been provided. Accordingly, no income tax provision or benefit has been recognized in the accompanying financial statements.

            (c) Use of Estimates

            Management of the Company has made certain estimates and assumptions relating to the reporting of assets and liabilities and the disclosure of contingent assets and liabilities to prepare these financial statements in conformity with generally accepted accounting principles.  Actual results could differ from those estimates.

            (d) Earnings per Common Share

            Earnings per common share have been computed based upon the weighted average number of shares outstanding during the period presented. 

            (e) Stock-based Compensation

            In October 1995, the Financial Accounting Standards Board issued Statement of Financial Accounting Standards No. 123, "Accounting for Stock-Based Compensation" (SFAS 123) which sets forth accounting and disclosure requirements for stock-based compensation arrangements.  The new statement encourages but does not require, companies to measure stock-based compensation using a fair value method, rather than the intrinsic value method prescribed by Accounting Principles Board Opinion No. 25 ("APB No. 25").  The Company has adopted the disclosure requirements of SFAS 123 and has elected to continue to record stock-based compensation expense using the intrinsic value approach prescribed by APB No. 25.  Accordingly, the Company computes compensation cost for each employee stock option granted as the amount by which the quoted market price of the Company's common stock on the date of grant exceeds the amount the employee must pay to acquire the stock.  The amount of compensation cost, if any, will be charged to operations over the vesting period.

            The Company intends to adopt SFAS 123(R) using the "modified prospective" transition method beginning with the first quarter of 2006. Under this method, awards that are granted, modified, or settled after December 15, 2005, will be measured and accounted for in accordance with SFAS 123(R). In addition, beginning in the first quarter of 2006, expense must be recognized in the earnings statement for unvested awards that were granted prior to the adoption of SFAS 123(R). The expense will be based on the fair value determined at grant date under SFAS 123, "Accounting for Stock-based Compensation."

            (f) Cash Flows

            For purposes of cash flows, the Company considers all highly liquid investments with original maturities of three months or less to be cash equivalents.

Note 4 - Prepayments under Product Supply Agreement

            Pursuant to a product supply agreement entered into by Aquamer in October 1999, as amended in March 2002, the Company, in July 2005, prepaid $90,000 for the purchase of hydrogel product, based on poly-N-vinylpyrrolidone, as specified in certain U.S. Patents. The product supply agreement mandates minimum purchases of $50,000 per year. The $90,000 payment satisfied the Company's purchase obligations for 2003 and 2004.

Note 5 - Advances to Related Parties

            The Company is the holder of a note receivable from the Company's director and former president for $29,000, which bears interest at 4% per annum. At June 30, 2005 the total balance outstanding including accrued interest of $4,014 was $33,014. Interest for the three months and nine months ended September 30, 2005 was $290 and $870, respectively.

Note 6 - Advances from Stockholder

            In December 2001, a stockholder advanced $50,000 to the Company, which bears interest at 6% and is due and payable on demand. As of September 30, 2005, interest in the amount of $11,250 has been accrued, including $750 and $2,250 in the three months and nine months ended September 30, 2005, respectively.

Note 7 - Convertible Note Payable - Related Party

            In July, 2005, the Company issued, to a related party, an unsecured convertible note, with warrants attached, in the principal amount of $90,000 for $90,000 cash.  The note proceeds were used for prepayments under a product supply agreement described above in Note 4. The note bears interest at 12% per annum, payable semi-annually and matures on January 15, 2007. The note may be converted into the Company’s common stock, at the holder’s option, at the lesser of $0.10 per share or the average of the two highest bids for the Company’s common stock for the five days prior to conversion. The attached warrants are described below, in Note 8 - Stockholders’ Equity- Warrants.

            Pursuant to the requirements of Emerging Issues Task Force ("EITF") 98-5 "Accounting for Convertible Securities with Beneficial Conversion Features or Contingently Adjustable Conversion Ratios" and EITF 00-27"Application of Issue No. 98-5 to Certain Convertible Instruments", the issuance of the $90,000 Note and detachable warrants resulted in a discount being recorded in the amount of $3,530 from the beneficial conversion feature and relative fair value of the warrants, as determined using an appropriate valuation model, and is being amortized over the term of the $90,000 note. During the three months ended September 30, 2005, the Company amortized $500 of the discount to interest expense. The beneficial conversion feature in the amount of $1,765 was credited to Stockholders’ equity - Additional paid-in capital at the date of issuance of the note payable.

            The note and warrants are restricted as to transferability. The Company relied upon the exemption from registration under the Securities Act of 1933 provided by Section 4(2) thereof in connection with the issuance of the securities. The holder of the note and warrants may include the securities as part of any future registration statement of the Company under "piggy-back" registration rights.

Note 8 - Stockholders' Equity

            Capital Structure

           The Company is authorized by its Articles of Incorporation to issue 50,000,000 shares of common stock with a par value of $0.0001 and 25,000,000 shares of preferred stock. As of September 30, 2005 there were 38,214,648 shares of common stock that were issued and outstanding. There were no preferred shares issued as of that date.

            Stock Issued for Cash

            In May and June 2005, the Company issued a total of 100,000 shares of common stock, which are restricted as to transferability, for $20,000 or $0.20 per share. The Company relied upon the exemption from registration under the Securities Act of 1933 provided by Section 4(2) thereof in connection with the issuance of the securities.

            In September 2005, the Company issued a total of 825,000 shares of common stock, which are restricted as to transferability, for $165,000, or $0.20 per share. The shares were sold as part of a private placement to accredited investors in reliance on Rule 506 promulgated under Section 4(2) of the Securities Act of 1933.

            Stock Issued in Exchange for Aquamer

            On January 26, 2005, the Company issued 28,504,148 shares of common stock, which are restricted as to transferability, to the former shareholders of Aquamer, Inc. on the basis of one share of Bellacasa common stock for each share of Aquamer capital stock. The Company relied upon the exemption from registration under the Securities Act of 1933 provided by Section 4(2) thereof in connection with the issuance of the securities.

            Stock Issued for Services

            On February 26, 2005, the Company issued a total of 600,000 shares of common stock for services. The shares, which are restricted as to transferability, were valued at $22,500 or $0.0375 per share, which was representative of the approximate market value at the date of issuance. The Company relied upon the exemption from registration under the Securities Act of 1933 provided by Section 4(2) thereof in connection with the issuance of the securities.

           Warrants

           In connection with the issuance of the Convertible Note Payable, described above in Note 7 - Convertible Note Payable  -Related Party, the Company issued, to the purchaser of the note, 18-month warrants to purchase 180,000 shares of the Company’s common stock at an exercise price of $0.10 per share. The expiration date of the warrants is January 15, 2007. The Company relied upon the exemption from registration under the Securities Act of 1933 provided by Section 4(2) thereof in connection with the issuance of the warrants. The warrant holder is entitled to certain "piggy-back" registration rights. At the date of issuance, the fair value of the warrants, $1,765, was credited to Stockholders’ equity- Additional paid-in capital.

Note 9 - Stock Option Plan

            In July 1998, the Company adopted the Bellacasa Productions, Inc. 1998 Stock Option Plan (the "Plan").  The Plan provides for the issuance of up to 1,000,000 shares for options over a ten-year period.  Under provisions of the Plan, the purchase price for a share of stock subject to the options shall not be less then 100% of the fair market value of the stock at the date of grant.  In February 2005, stock options to purchase 50,000 and 400,000 shares of common stock for a total of 450,000 were granted with an expiration date of February 2010 and an exercise price of $0.15 per share. In April 2005, a director, in connection with his resignation, returned to the Company the stock option for 50,000 shares. As of September 30, 2005 no other stock options had been granted.

Note 10 - Going Concern

            The Company's financial statements have been presented on a going concern basis, which contemplates the realization and the satisfaction of liabilities in the normal course of business.  The liquidity of the Company has been adversely affected by losses since inception of the Successor Company of approximately $490,000, which raises substantial doubt about the Company's ability to continue as a going concern without additional capital contributions and/or achieving profitable operations.  Management's plans are to raise additional capital either in the form of common stock or convertible securities and continue research and development and pursue clinical trials to obtain necessary approvals to market its products. There can be no assurance, however, that the Company will be successful in accomplishing its objectives.

ITEM 2 - MANAGEMENT'S DISCUSSION AND ANALYSIS AND PLAN OF OPERATION

General

            Bellacasa Productions, Inc. ("we," "us," the "Company" or "Bellacasa"), a Nevada corporation, was formed in 1998 to operate as a motion picture studio. We planned to acquire, produce and market motion pictures for distribution to movie theaters and ancillary markets. We were unsuccessful in raising capital to pursue our business plan.

            On November 15, 2004, we entered into a Stock Purchase Agreement to acquire all of the issued and outstanding stock of Aquamer, Inc. ("Aquamer"), a development stage medical technology corporation organized under the laws of Delaware, in exchange for shares of our common stock. The agreement was amended on January 26, 2005, at which time the transaction was consummated.

            The acquisition was structured as a reverse takeover, whereby former shareholders of Aquamer obtained voting control over Bellacasa upon issuance of 28,504,148 shares of Bellacasa common stock, which represented approximately 78% of the total shares to be outstanding. Bellacasa had 8,185,500 shares of common stock issued and outstanding prior to the completion of the transaction.

Description of Aquamer

            Aquamer, Inc. was incorporated in Delaware on February 4, 2000 and was acquired by Bellacasa Productions, Inc. on January 26, 2005.   We are now solely a medical device company focused on the development and commercialization of three injectable biocompatible products.  The products we are developing consist of a water-based polymer technology utilized as a tissue-bulking agent in the fields of dermatology (AquaDerm®), urology/gynecology (AquaGen®), and gastroenterology (AquaFlux®).  Although we are a development stage company, our products are based on the results of several years of research and development, whereby we are now in the stage of preparing for and executing on clinical evaluation milestones. 

            AquaDerm® has received an Investigational Device Exemption ("IDE") from the U.S. Food and Drug Administration ("FDA") and is undergoing pilot clinical evaluation. This product is being developed for the potential treatment of deep wrinkles, facial scars, and various cosmetic plastic surgery procedures such as lip augmentation. AquaGen® has been designed for use as a bulking agent in minimally invasive treatment of stress urinary incontinence, the most common form of urinary incontinence.  AquaFlux® is being developed as a bulking agent in the minimally invasive treatment of chronic heartburn or gastroesophogeal reflux disease ("GERD").

Business Overview

          Bellacasa Productions, Inc., through a wholly owned subsidiary, Aquamer, Inc., is a clinical development stage company with a platform technology that builds on over 10 years of scientific effort.  We plan to develop our water-based injectable technology to be utilized as a bulking agent in the respective fields of use. We believe that our products, which are in development will have competitive advantages pertaining to increased maintenance of efficacy or tissue "bulking," safety, ease of injection, and non-cumbersome operational management issues associated with shipping and storage.  Inherent in our technology is its biocompatibility, non-immunogenicity, and lack of migration/absorption.  We plan to attempt to become a leading provider of minimally invasive injectable modalities for dermatology, urology, and gastroenterology.

            Technology

            Our PVP-based injectable products involve the use of a polymeric component from the poly-n-vinyl pyrrolidinone (PVP) family, which is recognized for its biocompatibility and extensive clinical experience in other Class III (permanent implantable) medical devices. PVP is a non-toxic, non-metabolized hydrogel that has been approved for use as a plasma volume expander, a plasma detoxifying agent, an orally-ingested diagnostic aid (complex of PVP and iodine), a component of soft contact lenses, a variety of dental applications, a filler for a permanent implantable urological device and as an excipient in the manufacturing of tablets containing a variety of drugs.  The dose of PVP used in the AquaGen® product is minimal; approximately 95% of the injected volume is water contained in the polymer matrix.

            Partners in Biomaterials Inc. ("Partners") has granted us a worldwide license to all the above technology and related intellectual property for use in our field of business. We seek to obtain regulatory approval and commercialize these products. The Patent License Agreement also provides us the opportunity to obtain rights to any improvements made by Partners, as it relates to products for use in our business. The Patent License Agreement expires on the date of the last-to-expire patent included within the Patent License Agreement, currently May 26, 2012 . We have also entered into a Product Supply Agreement with Partners, whereby Partners will supply us with polymer products in accordance with an agreed upon procedure and established price. We are currently renegotiating both of these agreements but there are no assurances that the negotiations will result in any modifications

            Products in Development

            We are developing the following products designed for use in dermatology, urology, and gastroenterology:

            Dermatology 

            AquaDerm® is targeted for long-term corrective effects of treatment; PVP has infinite molecular weight as a base polymer matrix, which impedes absorption and migration of polymer substrate into the surrounding tissue, thus lengthening the cosmetic effect. AquaDerm® addresses conditions of tissue atrophy due to aging, facial wrinkles and depressed scars, as well as soft tissue defects resulting from surgery and inflammatory skin diseases. Most other injectable materials are suspensions (leading to the absorption of suspension media and migration of suspended particles) or biological in nature (such as Collagen, which the body digests). Our product will be injected into the affected areas and filled to the appropriate point, making the defect flush with the surrounding tissue, or in the case of lip augmentation "plumped" to the desired size. Most products in the facial aesthetics/dermatology market today have the common drawback of migration/absorption.  Animal trials and initial human clinical trials indicate longer-term maintenance of results for AquaDerm®.

            Urology

            AquaGen® has been developed for use as a bulking agent in the minimally invasive treatment of stress urinary incontinence ("SUI"), the most common form of urinary incontinence. AquaGen® is injected into the urethra/bladder junction (urinary sphincter muscle), reinforcing the muscle tissues around the bladder neck, the "bulking" of the closure mechanism that prevents accidental urine leakage.

            SUI relates to the accidental or unintentional leakage of urine. It afflicts, worldwide, more than 25 million people, 85 percent of whom are female.  Incontinence is a significant health issue, with millions experiencing complications related to incontinence at some point in their lives.  This potentially debilitating condition should not be a normal part of aging.  More than half of all women will suffer from SUI at some point in their lives. The "stress" in stress urinary incontinence is not associated with mental or emotional stress, but rather with increases in physical stress or pressures exerted on the body. One cause of stress incontinence is a condition called Intrinsic Sphincter Deficiency or ISD. This condition is present when the urinary sphincter (the muscle surrounding the urethra that controls urine flow) is not strong enough to close the bladder neck. This open bladder neck allows urine to leak out wheneve r there is an increase in intra-abdominal pressure.

            Gastroenterology

            AquaFlux® has been designed for use as a bulking agent in the minimally invasive treatment of chronic heartburn or gastroesophageal reflux disease ("GERD"). AquaFlux® is utilized as a bulking agent to strengthen and build the sphincter muscle at the base of the esophagus through a minimally invasive procedure, reinforcing and augmenting the closure mechanism that prevents reflux or gastric heartburn.

            GERD is a condition whereby gastric contents from the stomach rise into the esophagus, known as reflux. In a normal functioning stomach, the sphincter at the bottom of the esophagus (lower esophageal sphincter, abbreviated to LES) opens to let food pass into the stomach and then closes to prevent the gastric contents in the stomach from rising into the esophagus. When a patient suffers from GERD, the lower esophageal sphincter relaxes at random times, allowing gastric contents from the stomach to reflux into the esophagus.  Afflicting 7% to 10% of the U.S. adult population, GERD is different from regular heartburn in that it can have serious health consequences beyond the persistent burning pain of heartburn. It can lead to more serious medical problems such as difficulty swallowing (dysphagia), painful swallowing (odynophagia), narrowing of the esophagus (strictures), and Barrett's esophagus, believed to be a premalignant lesion. Chronic hoarseness or laryngitis, respiratory problems (e.g., coughing, wheezing, asthma, recurrent pneumonia), and non-cardiac chest pain are sometimes associated with GERD. GERD patients may need to sleep sitting up or avoid bending over to prevent fluids from coming up from the stomach.

Market Opportunity

            The market for aesthetic facial products has expanded at an estimated annual rate in excess of 35%, since 2000. The range of products encompasses invasive and non-invasive treatment modalities to remedy aging and defective soft tissues of the face.  Products such as Botox® and Collagen (Zyderm® and Zyplast®) are currently  "the gold standards" used by plastic surgeons and dermatologists in an office environment and now even by consumers under medical guidance (Botox® injections can be administered within a patient's home).  Most of these treatments are elective and are pursued by patients for cosmetic effects rather than medical necessity. As the average age of the population increases, interest in skin rejuvenation and correction has increased.  More than 8.3 million surgical and non-surgical cosmetic procedures were performed in 2003, including rhytidectomy (facelift), liposuction, laser resurf acing, chemical peeling and soft tissue augmentation (American Society for Aesthetic Plastic Surgery). In addition, more than one million patients undergo surgery each year for skin cancer in the United States alone. Many of these lesions are resected from the face and necessitate reconstruction. As a result of the number of patients affected, there is great interest in filling substances for the skin for both cosmetic and reconstructive purposes.

            Urinary incontinence afflicts more than 25 million people worldwide, 85 percent of whom are female.  The condition may have negative emotional, social and hygienic consequences. The Agency for Health Policy and Research (AHCPR), a division of the Public Health Service, U.S. Department of Health and Human Services, estimates that urinary incontinence affects approximately 13 million people in the United States, of which 85% or 11 million are women. The same agency estimates the total cost (utilizing all management and curative approaches) of treating incontinence of all types in the United States as $15 billion. Urethral Bulking Agents ("UBA") are currently recommended by AHCPR as first-line treatment for woman with ISD who do not have coexisting urethral hypermobility. Male patients can also benefit from a urethral bulking agent procedure, which is recommended as a first-line surgical treatment for men with ISD, accordin g to the Agency for Health Policy and Research. According to the American College of Surgeons, there are approximately 400,000 prostate surgeries performed each year in the United States, and up to 20% of these men develop incontinence following the procedure. Additionally, urinary incontinence can result in a substantial decrease in a person's quality of life, and it is often the main reason a family may move an elderly relative into nursing home care.  We expect the incidence of urinary incontinence will rise as the percentage of elderly people continues to increase.  The Agency for Healthcare Research and Quality ("AHRQ") reported that vesicoureteral reflux (VUR) is primarily a pediatric concern, with a prevalence estimated to be as high as 3% of the U.S. pediatric population. Approximately 15,000 surgical procedures are performed per year to address this VUR issue. Patients with VUR grades 1 through 4 in this population are candidates for minimally invasive surgery using a bulking agent. Global ly, the use of a bulking agent to correct the VUR condition can reduce patient costs related to continued use of antibiotics for treatment of chronic urinary tracts infections, which can lead to more serious related complications.

            There is a large market for the treatment of chronic heartburn or gastroesophogeal reflux disorder.  More than 60 million Americans suffer from heartburn symptoms at least once a month.  Roughly 25 million or 4 to 7% of Americans, suffer from reflux on a daily basis.  PPIs or Proton Pump Inhibitors are the current standard in treatment.

            While the market opportunities are attractive, potential investors must be aware additional funds are required to carry out more clinical trials and seek regulatory approvals.

Intellectual Property

            As mentioned above, Partners has granted us a worldwide license to all the above technology and related intellectual property for use in our field of business. The Patent License Agreement also provides us the opportunity to obtain rights to any improvements made by Partners, as it relates to products for use in our business. The Patent License Agreement expires on the date of the last-to-expire patent included within the Patent Rights, currently May 26, 2012. In accordance with the terms of the Patent License Agreement, we are obligated to pay to Partners a five percent (5%) royalty on sales of products incorporating their patents. We have also entered into a Product Supply Agreement with Partners whereby Partners will supply polymer products to us in accordance with an agreed upon procedure and established price. We are currently renegotiating both of these agreements but there are no assurances that the negotiations will result in a ny modifications.

            The Patent License Agreement may be terminated by either party for material breach or insolvency of the other party. We may also terminate upon thirty (30) days notice to Partners. Partners may terminate if we do not invoice at least a cumulative $5,000,000 for the three (3) year period following the date regulatory approval is granted for marketing or $5,000,000 for any subsequent consecutive three (3) year period. As mentioned elsewhere herein, additional clinical trials are required prior to our seeking regulatory approval.

Product Supply Agreement

            In October 1999, Aquamer entered into a product supply agreement with Partners for the purchase of hydrogel product, based on poly-N-vinylpyrrolidone, as specified in certain U.S. Patents.  This agreement, which was amended in March 2002, mandates that we make minimum purchases of $50,000 per year. In July 2005, we paid $90,000 to satisfy our minimum purchase obligations for 2003 and 2004. The product will be manufactured for us and delivered to us in accordance with our scheduling requirements. The product is to be used for our clinical testing in the fields of dermatology, urology and gastroenterology.

            The Product Supply Agreement expires on December 31, 2006 and may be terminated by either party for material breach or insolvency of the other party. We may also terminate if Partners is unable to produce the product in a facility which complies with ISO/FDA requirements. Partners may terminate for non-payment of invoices for greater than sixty (60) days and can also terminate upon six (6) months notice.

Clinical Trials

            We have received an approved Investigational Device Exemption ("IDE") from the FDA to conduct a pilot clinical trial study of the AquaDerm® product. The study enrolled twenty (20) patients at one site and all patients completed their follow-up per the protocol. No additional patients are expected to be enrolled at this site. Both our company and the principal study investigator concluded that the results of this feasibility study to date demonstrate the device is potentially both safe and efficacious, warranting further study under this IDE in a multi-center trial. As mentioned elsewhere, additional funds will be required to do more clinical trials and seek regulatory approval to market the product.

Employees

            Other than our president, Edwin A. Reilly, who devotes such time as necessary to our operations, we do not have any employees. We may utilize independent contractors and consultants from time to time to assist us with our compliance requirements.

Results of Operations

            The following discussion and analysis provides information our management believes is relevant to an assessment and understanding of our results of operations and financial condition. The discussion should be read in conjunction with the financial statements and footnotes that appear elsewhere in this report.

            Three Months Ended September 30, 2005 and Three Months Ended September 30, 2004           

            Sales - We did not have any sales during the three months ended September 30, 2005. Bellacasa Productions, Inc. and Aquamer, Inc. are both development stage entities, and neither has had revenues since their respective formation dates, July 28, 1998 and February 4, 2000.

            Costs and Expenses - Expenses for the three months ended September 30, 2005 were $6,210 compared to $9,491 for the three months ended September 30, 2004. Expenses for the third fiscal quarter of 2005 consisted of $2,741 of general and administrative expenses, including: $2,300 for accounting and other professional expenses in connection with our reporting requirements; $306 for stock transfer; $135 for other expenses. The remaining expenses consisted of $259 for depreciation; and $3,210 for interest expense. Interest expense included $750 for interest accrued on the $50,000 shareholder advance; $2,750 for interest on the $90,000 convertible note of which $2,250 was accrued and $500 was amortized discount; offset by accrued interest income of $290 on our advance to a related party. Expenses in the 2004-quarter were those of Bellacasa Productions, Inc. (Predecessor Company) and did not include Aquamer's (Successor Company) ex penses as a stand-alone entity and consisted of accrued interest of $750 on the $50,000 shareholder advance; depreciation, $228; and professional fees of approximately $8,500.

            Losses and Income - Net loss, before taxes, for the three months ended September 30, 2005 was $6,210. In the three months ended September 30, 2004, Bellacasa (the Predecessor Company) incurred a net loss before taxes of $9,491.

            We have elected not to reduce our net loss by any tax benefit for the quarter ended September 30, 2005.

            Loss per share for the three months ended September 30, 2005 was $NIL. For the three months ended September 30, 2004, Bellacasa (the Predecessor Company) had net loss per share of $NIL.  The 2005-third quarter loss per share was based on 37,488,289 weighted average common shares. The net loss per share for the 2004-third quarter was based on 8,134,450 weighted average common shares.

Nine Months Ended September 30, 2005, Nine Months Ended September 30, 2004, and from Inception, February 4, 2000 through September 30, 2005

            Sales - We did not have any sales during the nine months ended September 30, 2005. Bellacasa Productions, Inc. and Aquamer, Inc. are both development stage entities, and neither has had revenues since their respective formation dates, July 28, 1998 and February 4, 2000.

            Costs and Expenses - Expenses for the nine months ended September 30, 2005 were $36,681 compared to $11,365 for the nine months ended September 30, 2004. Expenses for the first nine months of 2005 consisted of $31,774 general and administrative expenses; $777 for depreciation; and $4,130 for interest expense. Included in the general and administrative expenses for the nine months ended September 30, 2005 was $22,500 for consulting and professional services, which were paid for with shares of our stock, in lieu of cash. Interest expense included $2,250 for interest accrued on the $50,000 shareholder advance; $2,750 for interest on the $90,000 convertible note of which $2,250 was accrued and $500 was amortized discount; offset by accrued interest income of $870 on our advance to a related party.  Expenses in the 2004-nine months were those of Bellacasa Productions, Inc. (Predecessor Company) and did not include Aquamer's (Suc cessor Company) expenses as a stand-alone entity and consisted of; professional fees of approximately $8,500; depreciation, $602; and accrued interest of $2,250 on the $50,000 shareholder advance.

            Costs and expenses were $524,938, as a development stage enterprise since inception. These costs and expenses consisted of Aquamer's costs and expenses from its inception, February 4, 2000 up until its acquisition by Bellacasa on January 26, 2005 and then on a consolidated basis through September 30, 2005.

            Losses and Income - Net loss, before taxes, for the nine months ended September 30, 2005 was $36,681, which consisted of Aquamer's (the Successor Company) expenses from January 1, 2005 to January 25, 2005 and consolidated expenses from January 26, 2005 (the acquisition date) through September 30, 2005.  During the nine-month period ended September 30, 2004, the former president of Bellacasa (the Predecessor Company) agreed to forgive certain debts owed by Bellacasa (the Predecessor Company) in the amount of $334,560, which resulted in net income before taxes for the nine months of $323,195. Our losses since inception, which are the losses of Aquamer (the Successor Company), total $490,247.

            We have elected not to reduce our net loss by any tax benefit for the nine months ended September 30, 2005 or since inception.

            Loss per share for the nine months ended September 30, 2005 was $NIL. For the nine months ended September 30, 2004, Bellacasa (the Predecessor Company) had net income per share of $0.04.  The 2005-nine month loss per share was based on 34,600,752 weighted average common shares. The net income per share for the 2004-nine months was based on 8,082,167 weighted average common shares.

Liquidity and Capital Resources

            As of September 30, 2005, we had cash balances of $176,892, for an increase of $176,826 from December 31, 2004 and an increase of $160,684 from June 30, 2005. The increase in the quarter ended September 30, 2005 resulted from our sale of 825,000 shares of our common stock, as part of a private placement to accredited investors, for $165,000. The proceeds from the issuance of these shares will be used to continue the process of seeking FDA approval and general working capital.

            Our current liabilities, at September 30, 2005, totaled $104,385. Included in these liabilities is an advance made to us by Mr. Charles LaLoggia, a shareholder of our company, in the amount of $50,000 plus $11,250 of accrued interest for a balance of $61,250. This debt is due on demand and accrues annual interest of 6%. Also included in total liabilities, as of September 30, 2005, are accounts payable of $40,885; and accrued interest of $2,250 on the convertible note payable.

            In July 2005, we issued to an existing stockholder, a $90,000 convertible note with attached warrants. The note matures on January 15, 2007 and bears interest at 12% per annum, payable semi-annually.  The note is convertible, at the holder’s option, into our common stock at the lesser of $0.10 per share or the average of the two highest market-maker bids five days prior to the date of conversion. We carry the note on our balance sheet at $86,970, which represents the principal balance of $90,000, net of unamortized discount resulting from the beneficial conversion feature and the value of the warrants.

            The proceeds of the convertible note were used to satisfy our 2003 and 2004 commitment under a purchase supply agreement. We have paid $90,000 for product to be used in clinical testing which will be manufactured for us and delivered to us in accordance with our supply needs.

            In order to continue to test our products and technologies and to continue with clinical trials and to pursue necessary government approvals, we must continue to raise additional capital or borrow the funds needed. There is no assurance that we will be successful in our fundraising efforts.

Ability to Continue as a Going Concern and Plan of Operation

            Our financial statements have been presented on a going concern basis, which contemplates the realization and the satisfaction of liabilities in the normal course of business.  Our liquidity has been adversely affected by losses from operations.  Our subsidiary, Aquamer, Inc., now our operating company, has had losses since its inception (February 2002) totaling approximately $490,000, which raises substantial doubt about our ability to continue as a going concern without additional capital contributions and/or achieving profitable operations. 

            In order to meet our cash needs for the next 12 months, we will be required to borrow funds or sell our securities in private offerings for continued clinical trials and seeking regulatory approval to market our products. If we are unable to raise sufficient funds, we may be unable to pursue our business plan. There is no assurance we will be able to raise the funds we require.

Government Regulation

            The FDA regulates the manufacture, clinical research and sale of medical devices, including labeling, advertising and recordkeeping.  Before a new device can be introduced into the market, generally, the manufacturer must obtain FDA approval of a pre-market approval ("PMA") or clearance of a 510(k) notification submission.  A PMA application must be filed if a proposed device is not substantially equivalent to a legally marketed Class I or Class II device, or if it is a Class III device for which the FDA has called for PMAs. The PMA application must contain the results of clinical trials, the results of all relevant bench tests, laboratory and animal studies, a complete description of the device and its components, and a detailed description of the methods, facilities and controls used to manufacture the device.  FDA's review of a PMA application generally takes one to two years from the date the PMA is accepted for fili ng, but it may take significantly longer. Review time is often significantly extended by FDA requests for additional information or clarification of information already provided in the submission. Modifications to a device that is the subject of an approved PMA, its labeling or manufacturing process may require approval by the FDA of PMA supplements or new PMAs. The PMA process can be expensive, uncertain, and lengthy.  A number of medical devices that sought FDA approval, by other companies, have never been approved for marketing.

            If human clinical trials of a device are required in order to obtain adequate safety, performance and/or efficacy data, and the device presents a "significant risk" to the patient, the sponsor of the trial (usually the manufacturer or the distributor of the device) will have to file an Investigational Device Exemption ("IDE") application prior to commencing human clinical trials.  The IDE application must be supported by data, typically including the results of animal and laboratory testing.  If the FDA approves the IDE application and the study protocol is approved by one or more appropriate Institutional Review Boards ("IRBs"), human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA.  If the device presents a "nonsignificant risk" to the patient, a sponsor may begin the clinical trial after obtaining approval for the study by one or more a ppropriate IRBs without the need for FDA approval.

            Sponsors of U.S. clinical trials may be permitted to sell investigational devices distributed in the course of the study provided that compensation does not exceed recovery of the costs of manufacture, research, development and handling.  An IDE supplement must be submitted and approved by the FDA and appropriate IRB(s) before a sponsor or investigator may make a change to the investigational plan that may affect its scientific soundness or the rights, safety or welfare of human subjects.

            A 510(k) clearance will be granted if the submitted information establishes that the proposed device is "substantially equivalent" to a legally marketed Class I or Class II medical device or a Class III medical device for which the FDA has not called for PMAs. The FDA recently has been requiring more rigorous demonstration of substantial equivalence than in the past, including, in some cases, requiring submission of clinical trial data. The FDA may determine that the proposed device is not substantially equivalent to a predicate device, or that additional information is needed before it is deemed substantially equivalent to a predicate device or that additional information is needed before a substantial equivalence determination can be made.

            Our PVP-Injectable is classified as a Class III medical device, which requires pre-market approval (PMA) from the FDA. Our clinical research program for medical devices has been and remains subject to the IDE regulations of the FDA.  These regulations govern many important aspects of the clinical investigation of medical products, including obtaining informed consent from clinical subjects, securing the approval of an IRB and maintaining required documentation relating to the conduct of the investigational study.  In addition, these regulations may require that we obtain approval from the FDA prior to the commencement of clinical investigations of new products.

            Compliance with the current Quality Systems Regulations ("QSR"), formerly Good Manufacturing Practices, is necessary to receive FDA approval to market new products and to continue to market current products.  Manufacturers of medical devices for marketing in the U.S. are required to adhere to applicable regulations setting forth detailed QSR requirements, which include testing, control and documentation requirements.  Manufacturers must also comply with Medical Device Reporting ("MDR") requirements that a company report to the FDA any incident in which its product may have caused or contributed to a death or serious injury, or in which its product malfunctioned and, if the malfunction were to recur, would be likely to cause or contribute to death or serious injury.  Labeling and promotional activities are subject to scrutiny by the FDA and, in certain circumstances, by the Federal Trade Commission.  FDA enforcement policy prohibits the marketing of approved medical devices for unapproved uses.

            The continuing trend of more stringent FDA oversight in product clearance and enforcement activities has caused medical device manufacturers to experience longer approval cycles, more uncertainty, greater risk and higher expenses.  Failure to obtain, or delays in obtaining, the required regulatory approvals for new products could adversely affect us, as could product recalls.  In addition, there can be no assurance that the FDA will give approval to us to market our products.

            Sales of medical devices outside the U.S. are subject to regulatory requirements that vary widely from country to country.  The time required to obtain clearance required by countries may be longer or shorter than that required for FDA clearance, and requirements for such clearances may differ significantly from FDA requirements.  Some countries have historically permitted human studies earlier in the product development cycle than regulations in the U.S. permit.  Other countries, such as Japan, have requirements similar to those of the U.S.  This disparity in the regulation of medical devices may result in more rapid product clearance in certain countries than in others.

            The primary regulatory environment in Europe is that of the European Community, which consists of more than 15 countries encompassing most of the major countries in Europe.  Certain other countries, such as Switzerland, have voluntarily adopted laws and regulations that mirror those of the EC with respect to medical devices.  The EC has adopted numerous directives and standards regulating the design, manufacture, clinical trial, labeling and adverse event reporting for medical devices.  The principal directives prescribing the laws and regulations pertaining to medical devices in the EC are found in the European Medical Devices Directive, 93/42/EC.

            Devices that comply with requirements of a relevant directive will be entitled to bear CE conformity marking, indicating that the device conforms to the essential requirements of the applicable directive and accordingly, can be commercially distributed throughout the EC.  The method of assessing conformity varies depending on the class of the product, but normally involves a combination of self-assessment by the manufacturer and a third-party assessment by a Notified Body.  This third-party assessment may consist of an audit of the manufacturer's quality system, review of a technical file and specific testing of the manufacturer's products.  An assessment by a Notified Body in one country within the EC is required in order for a manufacturer to commercially distribute the product throughout the EC.  There can be no assurance that we will be successful in meeting the European quality standards or other certification requirements.  While no additional pre-market approvals for individual EC countries are required prior to the marketing of a device bearing CE Mark, practical complications with respect to market introduction may occur.  For example differences among countries have arisen with regard to labeling requirements.

            Unapproved devices subject to the PMA requirements generally must receive prior FDA export approval unless they are approved for use by any member country of the EC and certain other countries, including Australia, Canada, Israel, Japan, New Zealand, Switzerland and South Africa, in which case they can be exported to any country without prior FDA approval upon meeting certain requirements.  Exports of products subject to the 510(k) notification requirements, but not yet cleared to market, are permitted without FDA export approval provided certain requirements are met.  However, we must, among other things, notify the FDA and meet the importing country's requirements.  There can be no assurance that we will receive FDA export approval when such approval is necessary, or that countries to which the devices are to be exported will approve the devices for import.  Failure to receive import approval from other countries, or to obtain Certificates for Products for Export when required, or to meet FDA's export requirements or to obtain FDA export approval when required to do so, could have a material adverse effect on our business, financial condition and results of operations.

            We currently have an approved and active IDE, under which a phase-one clinical trial is underway in our Dermatology Indication (for cutaneous wrinkles and scars). We are also preparing IDE applications for submission to FDA to initiate studies in the aforementioned Urology (Stress Incontinence) and GI (GERD) indications.

ITEM 3 - CONTROLS AND PROCEDURES

            We carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures as of September 30, 2005. This evaluation was accomplished under the supervision and with the participation of our chief executive officer, principal executive officer, chief financial officer/principal accounting officer who concluded that our disclosure controls and procedures are effective to ensure that all material information required to be filed in the quarterly report on Form 10-QSB has been made known to him. As of September 30, 2005, and the date of this Report, Edwin A. Reilly served as our Chief Executive Officer and Chief Financial Officer (which duties include that of principal accounting officer). There have been no changes in our internal controls over financial reporting which could significantly affect or are reasonably likely to materially affect internal controls subsequent to the date we completed our evaluation and the date of filing of this Report on Form 10-QSB.

            Disclosure controls and procedures are designed to ensure that information required to be disclosed in our reports filed or submitted under the Securities Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission's rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosure.

   PART II

OTHER INFORMATION 

Item 2 -Unregistered Sales of Equity Securities and Use of Proceeds

            Common Stock 

            In September 2005, as part of a private placement of up to $500,000, we issued a total of 825,000 shares of common stock, which are restricted as to transferability, for $165,000 or $0.20 per share.  The private placement of the shares of common stock was made and sold only to accredited investors in reliance on Rule 506 promulgated under Section 4(2) of the Securities Act of 1933, as amended (the "Act"). The shares have not been registered under the Act or under any state securities laws and may not be offered or sold absent registration with the SEC or an applicable exemption from the registration requirements. We intend to use the proceeds of the private placement to continue to execute our product development strategy for AquaGen®, AquaFlux®, and AquaDerm® products and to continue the process of seeking FDA approval and for general working capital.

            Convertible Note

            During the three months ended September 30, 2005, we also issued a $90,000 unsecured convertible note, with attached warrants, to Patricia Jenkins, an existing stockholder and related party. The note, dated July 15, 2005, was issued for $90,000 cash which we used for payments under a product supply agreement.

            The note bears interest at 12% per annum, payable semi-annually, and matures on January 15, 2007. The note may be converted into the our common stock, at the holder’s option, at the lesser of $0.10 per share or the average of the two highest bids for our common stock for the five days prior to conversion.

            Warrants

            In connection with the issuance of the convertible note payable, described above, we issued, to the purchaser of the note, 18-month warrants to purchase 180,000 shares of our common stock at an exercise price of $0.10 per share. The expiration date of the warrants is January 15, 2007.

            The convertible note and warrants are restricted as to transferability. We relied upon the exemption from registration under Section 4(2) of the Act in connection with the issuance of the securities. The holder of the note and warrants may include the securities as part of any future registration statement of the Company under "piggy-back" registration rights.

            As of September 30, 2005, we had 38,214,648 shares of common stock outstanding.

Item 5 - Other Information 

            On September 20, 2005, our Board of Directors appointed Mr. Edwin A. Reilly to the positions of Chairman of the Board, Chief Executive Officer and President, effective September 20, 2005. Mr. Reilly will work with current Director and Co-Founder, Mr. Steven Preiss, to execute our long-term strategy and near-term product development.

           On September 30, 2005, we moved our executive offices to 26 Chestnut Street, Suite 2L, Andover, Massachusetts 01810.

Item 6 - Exhibits and Reports on Form 8-K 

(a)	Exhibits
	Exhibit 31.1 - Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 of the Principal Executive Officer and Principal Financial Officer and Principal Accounting Officer Exhibit 32.1 - Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 of the Principal Executive Officer and Principal Financial Officer and Principal Accounting Officer
(b)	Reports on Form 8-K
	On September 26, 2005, we reported on Form 8-K, under Item 3.02, that we issued 825,000 unregistered shares of our common stock for $165,000 as part of a private placement; and under Item 5.02, that Edwin A. Reilly was appointed Chairman of the Board, President and Chief Executive Officer.

   SIGNATURES

            In accordance with the requirements of the Exchange Act, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

		BELLACASA PRODUCTIONS, INC.
November  14, 2005	By:	/s/ Edwin A. Reilly
		Edwin A. Reilly President and Chief Executive Officer (Principal Executive Officer) and Acting Chief Financial Officer (Principal Financial Officer and Principal Accounting Officer) and Chairman of the Board of Directors