Exhibit 1.01
Manitex International, Inc.
Conflict Minerals Report
For The Year Ended December 31, 2018
Introduction and Summary
This report for the year ended December 31, 2018 is presented to comply with Rule13p-1 under the Securities Exchange Act of 1934 (the Rule). The Rule was adopted by the Securities and Exchange Commission (“SEC”) and imposes certain reporting obligations on SEC registrants whose manufactured products contain conflict minerals that are necessary to the functionality or production of their products. The term “conflict minerals” is defined in Section 13(p) as (A) cassiterite, columbite-tantalite (coltan), gold, wolframite, and their derivatives, as limited by the Rule, tin, tantalum, tungsten, and gold (“3TG”); or (B) any other mineral or its derivatives determined by the Secretary of State to be financing conflict in the Democratic Republic of Congo (“DRC”) or any adjoining country that shares an internationally recognized border with the DRC (collectively referred to as the “Covered Countries”).Manitex International has reason to believe that some of the 3TGs present in their supply chain may have originated in the Covered Countries. We are unable with absolute assurance to determine the origin of the 3TG in our products and therefore cannot exclude the possibility that some may have originated in the Covered Countries. For that reason, we are required under the Rule to submit to the SEC a Conflict Minerals Report (CMR) as an Exhibit to Form SD.
Caution Concerning Forward-Looking Statements
Certain statements in this report may be “forward-looking” within the meaning of the Private Securities Litigation Reform Act of 1995. Words such as “expects,” “intends,” “plans,” “projects,” “believes,” and “estimates,” “targets,” “anticipates,” and similar expressions are used to identify these forward-looking statements. Examples of forward-looking statements include statements relating to our future plans, and any other statement that does not directly relate to any historical or current fact. Forward-looking statements are based on our current expectations and assumptions, which may not prove to be accurate. These statements are not guarantees and are subject to risks, uncertainties and changes in circumstances that are difficult to predict. Actual outcomes and results may differ materially from these forward-looking statements. As a result, these statements speak only as of the date they are made and we undertake no obligation to update or revise any forward-looking statement, except as required by federal securities laws.
1.Company & Product Overview
The Company is a leading provider of engineered lifting solutions. The Company reports in a single business segment and has five operating segments. The Company designs, manufactures and distributes a diverse group of products that serve different functions and are used in a variety of industries.
Manitex, Inc. (“Manitex”) markets a comprehensive line of boom trucks, truck cranes and sign cranes. Manitex’s boom trucks and crane products are primarily used for industrial projects, energy exploration and infrastructure development, including roads, bridges and commercial construction.
Badger Equipment Company (“Badger”) is a manufacturer of specialized rough terrain cranes and material handling products. Badger primarily serves the needs of the construction, municipality and railroad industries.
PM Oil and Steel S.p.A. (“PM” or “PM Group”), formerly known as PM Group S.p.A., is a leading Italian manufacturer of truck- mounted hydraulic knuckle boom cranes with a50-year history of technology and innovation, and a product range spanning more than 50 models. PM is also a manufacturer of truck-mounted aerial platforms with a diverse product line and an international client base.
Manitex Valla S.r.L. (“Valla”) produces a full range of precision pick and carry industrial cranes using electric, diesel, and hybrid power options. Its cranes offer wheeled or tracked, and fixed or swing boom configurations, with special applications designed specifically to meet the needs of its customers. These products are sold internationally through dealers and into the rental distribution channel.
Manitex Sabre, Inc. (“Sabre”), which is located in Knox, Indiana, manufactures a comprehensive line of specialized mobile tanks for liquid and solid storage and containment solutions with capacities from 8,000 to 21,000 gallons. Its mobile tanks are sold to specialized independent tank rental companies and through the Company’s existing dealer network. The tanks are used in a variety of end markets such as petrochemical, waste management and oil and gas drilling.
Crane and Machinery, Inc. (“C&M”) is a distributor of the Company’s products as well as Terex Corporation’s (“Terex”) rough terrain and truck cranes. Crane and Machinery Leasing, Inc. (“C&M Leasing”) rents equipment manufactured by the Company as well as a limited amount of equipment manufactured by third parties. Although C&M is a distributor of Terex rough terrain and truck cranes, C&M’s primary business is the distribution of products manufactured by the Company.
This report has been prepared by management of Manitex International, Inc. (herein referred to as “Manitex International,” the “Company,” “we,” “us,” or “our”). The information includes the activities of all majority-owned subsidiaries, except as may be noted above.
Our Conflict Minerals Policy can be found on the Manitex International website (http://www.manitexinternational.com/indexm.aspx) under the Investor Relations heading “Code of Ethics” and at: https://www.manitexinternational.com/codeofethics.aspx.
2.Description of RCOI
Manitex International’s reasonable country of origin inquiry (RCOI) employed a combination of measures to determine whether the necessary 3TGs in Manitex International’s products originated from the Covered Countries. Manitex International’s primary means of determining country of origin of necessary 3TGs was by conducting a supply chain survey with directin-scope suppliers using the RBA-GeSI conflict minerals reporting template (“CMRT”), version 5.11 or higher.
Manitex International, Inc. designs, manufactures and markets a portfolio of highly engineered and customizable lifting equipment, spanning boom truck, telescopic, rough terrain and industrial cranes, and mobile liquid and solid containment solutions, including parts support for all products. C&M is a distributor of Terex rough terrain and truck cranes as well as Manitex’s own products. C&M offers equipment repair services in the Chicago area and supplies repair parts for a wide variety of medium to heavy duty construction equipment both domestically and internationally. C&M Leasing rents equipment manufactured by the Company as well as equipment manufactured by third parties.
To compile a list of suppliers to be contacted for our conflict minerals survey process, in 2013, Manitex International identified well over two thousand potential suppliers supporting our various segments and providing thousands of parts from fully assembled flatbed trucks, which we build our cranes on, to prefabricated steel booms and components as well as hundreds of other parts such as electronic components, electrical wiring, lighting, computers, and other smaller parts which may be integral to the operation and functioning of our completed products. As it is expected that some of our components could contain one or more of the 3TG minerals, it was decided to conduct a survey of all our production related suppliers.
In 2018, Manitex International continued their scoping process of the listing of suppliers from each of its subsidiaries. This list was filtered to remove service providers and anynon-product related suppliers.
This process allowed Manitex International to compile a list of 366 suppliers across our various different divisions. The process helped to ensure that all suppliers surveyed provided items to Manitex International that were used in final products in the year 2018. Once the filtering was completed, Manitex International populated the list with contact information and then provided to Assent Compliance for upload to their Assent Compliance Manager SaaS (Software as a Solution) system.
It was deemed appropriate to not further filter this list based on the necessity of the presence of 3TGs in the product as Manitex International could not definitively determine the presence or absence of 3TGs in all parts supplied to them for their products. As part of the CMRT, question 1 allows for further analysis of the supplier, as it asks suppliers whether any of the 3TGs are necessary to the functionality or production of their products. Assent conducts additional analysis of the supply chain and, combined with supplier feedback, suppliers provided a response that allowed Assent and Manitex International to remove these suppliers from the scope of the conflict minerals analysis. The factors considered in Assent’s secondary analysis and the information provided that removed these suppliers from scope include:
• | The product they supply is packaging. (Labels do not count as packaging) |
• | Parts that do not end up in the final product. (This includes equipment used to make the product but is not a part of the actual product itself. i.e. Industrial equipment, computers etc.) |
• | Test Labs (i.e. Providers that test the resistance or durability of a product). |
• | Service Providers (i.e. any supplier that provides a service but not an actual physical part). |
• | Any supplier who has not supplied anything to Manitex International in the last 2 years. |
During the supplier survey, suppliers were contacted via the Assent Compliance Manager, a SaaS platform that enables its users to complete and track supplier communications as well as allow suppliers to upload completed CMRTs directly to the platform for risk assessment and management.Non-responsive suppliers were contacted a minimum of 3 times by the Assent Compliance Manager and then were also managed by the Assent Compliance Support team in one on one communications.
Assent communications includes training and education on the completion of the CMRT to alleviate any confusion with suppliers. As an improvement to our program, for 2018 we continued to utilize Assent’s Learning Management System, Assent University, and provided all in-scope suppliers access to their Conflict Minerals training course. All suppliers are encouraged to complete all modules within this course. All communications were monitored and tracked in Assent’s system for future reporting and transparency.
Using Assent, we maintained our automated data validation practices on all submitted CMRTs. The goal of data validation is to increase the accuracy of submissions and identify any contradictory answers in the CMRT. This data validation is based on:
• | Questions 1 and 2 are minimum requirements for the CMRT |
• | If suppliers state (via Q1 and Q2) that their products do not contain 3TGs necessary to the function or production of said products then no further information is required and no further data validation is completed. |
• | Question 3 – Do any of your 3TGs originate from the covered countries? |
• | Any supplier that has any 3TGs from the covered countries, even 1 positive response from their supply chain must answer yes. |
• | Question 4– is 100% of the 3TG in question from a recycled source? |
• | Question 5 – Have you received info from all relevant 3TG Suppliers? |
• | If you are not at 100%, then you can’t make definitive statements for Questions 3, 4 and 6 |
• | Question 6 – Have you identified all your Smelters? |
• | If the answer here is yes, then question 5 must be yes. This also impacts question 3. |
All submitted forms are accepted and classified as valid or invalid (incorrect) so that data is still retained. Suppliers are contacted in regards to invalid forms and are encouraged to resubmit a valid (corrected) form. As of May 3rd, 2019, there were 4 invalid supplier submissions.
Based on the RCOI, we had reason to believe that some of the 3TGs may have originated from the Covered Countries, therefore, in accordance with the Rule, performed due diligence on the source and chain of custody of the conflict minerals in question.
3.Due Diligence Process
Design of Due Diligence
Our due diligence measures have been designed to conform, in all material respects, with the framework in T he Organisation for EconomicCo-operation and Development (OECD) Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (OECD Guidance) and the related Supplements for gold and for tin, tantalum and tungsten. The Guidance identifies five steps for due diligence that should be implemented and provides guidance as to how to achieve each step. We developed our due diligence process to address each of these five steps.
Step 1: Establish Strong Company Management Systems
As described above, Manitex International, Inc. has adopted a company policy which is posted on our website at https://www.manitexinternational.com/codeofethics.aspx
Internal Compliance Team
Manitex International has established a management system for conflict minerals. Our management system includes a steering committee consisting of our Principal Financial Officer and our project leader (our Director of Internal Audit). The project sponsor is our Principal Financial Officer and our team consists of Purchasing and Production Managers from each of our subsidiaries and is supplemented by Assent Compliance. The team is responsible for implementing our conflict minerals compliance strategy and is led by our Director of Internal Audit who acts as the executive conflict minerals program manager. Senior management is briefed about the results of our due diligence efforts periodically.
Control Systems
Controls include, but are not limited to, our Code of Ethics which outlines expected behaviors for all Manitex International’s employees and suppliers. A supplier conflict minerals contract clause is included in our Code of Ethics Policy. We rely on our direct suppliers to provide information on the origin of the 3TG contained in components and materials supplied to us – including sources of 3TG that are supplied to them from lower tier suppliers.
Supplier Engagement
With respect to the OECD requirement to strengthen engagement with suppliers, we have, through Assent, provided education on the Conflict Minerals regulation as well as the expectations of the law and for a continued business relationship, leveraged the existing communications within the company, specifically procurement to encourage their interactions with Assent as well as understand the requirement for completion.
In addition, our procurement Purchase Order terms and conditions include Conflict Minerals compliance requirements. Feedback from this engagement has allowed us to enhance the training, focus and adapt it to each user’s needs. It has also allowed for our supplier communications to be more focused and ensure expectations are clear.
Grievance Mechanisms
We have multiple longstanding grievance mechanisms whereby employees and suppliers can report violations of Manitex International’s policies. Manitex International is committed to supporting responsible sourcing of conflict minerals. As an international company it is our responsibility to create a framework within our corporate structure as to comply with Conflict Mineral reporting rules of section 1502 of the Dodd-Frank Act.
Any Covered Person (any employee of Manitex International and its operating subsidiaries) who becomes aware of a violation or potential violation of this policy must promptly report that information to a supervisor, or to a Board member or via our AlertLine communication system. AlertLine can be accessed on the Internet at http://manitexinternational.alertline.com or by calling1-877-874-8416 (toll free).
Maintain Records
We have adopted a policy to retain relevant documentation. Documentation will be retained for a period of 5 years. Our Service Provider (Assent Compliance) retains conflict minerals related documents, including supplier responses to CMRTs. This information is stored in a database hosted by our Service Provider.
Step 2: Identifying and Assessing Risks in Our Supply Chain.
In accordance with OECD Guidance, it is important to understand risk levels associated with conflict minerals in the supply chain. Risks are identified automatically in the Assent Compliance Manager system based on criteria established for supplier responses in the system. These risks are addressed by Assent Compliance Supply Chain staff and members of our Conflict Minerals team internally, who contact the supplier, gather pertinent data and perform an assessment of the supplier’s conflict minerals status.
The primary risk we identified with respect to the reporting period ended December 31st, 2018 related to the nature of the responses received. Many the responses received provided data at a company or divisional level or were unable to specify the smelters or refiners used for 3TG in the components supplied to the Company.
Smelters not being certifiedDRC-Conflict Free pose a significant risk to the supply chain. Certain of the responses provided by suppliers to the CMRT included the names of facilities listed by the suppliers as smelters or refiners. We do not typically have a direct relationship with 3TG smelters and refiners and do not perform or direct audits of these entities within our supply chain. Assent compared these facilities listed in the responses to the list of smelters and refiners maintained by the Responsible Minerals Initiative (“RMI”) and, if a supplier indicated that the facility was certified as “Conflict-Free,” confirmed that the name was listed by RMI. As of May 3rd, 2019, we have validated 318 smelters or refiners and are working to validate the additional smelter/refiner entries from the submitted CMRTs. Due to the provision of primarily supplier-level CMRTs, we cannot definitively determine their connection to the Covered Products.
In the Assent Compliance Manager (the software used in conjunction with the services of our third party service provider), each facility that meets the RMI definition of a smelter or refiner of a 3TG is assigned a risk of High, Medium and Low; this Risk rating is generated based on 5 scoring criteria:
• | Responsible Minerals Assurance Process (RMAP) audit status |
• | Geographic proximity to the DRC and covered countries |
• | Known or plausible evidence of unethical or conflict sourcing |
• | Credible evidence of unethical or conflict sourcing; |
• | Peer Assessments conducted by credible third-party sources. |
As part of our risk management plan under the OECD Guidance, when facilities with red flags were reported on a CMRT by one of the suppliers surveyed, risk mitigation activities are initiated. Through Assent Compliance, submissions that include any red flag facilities immediately produce a receipt instructing the supplier to take their own risk mitigation actions, including submission of a product specific CMRT to better identify the connection to products that they supply to Manitex International, and escalating up to removal of these red flag smelters from their supply chain.
Additionally, suppliers are evaluated on program strength, further assisting in identifying risk in the supply chain. At this stage in Conflict Minerals compliance it is well-known that many companies are in the middle of the process and do not have many answers beyond “unknown”. It has been decided that penalizing or failing them for working through the process is likely not the best approach for the initial years of compliance, it does not meet the goals or spirit of the Rule, however evaluating and tracking the strength of the program does meet the OECD expectation.
Due Diligence Guidelines can assist in making key risk mitigation decisions as the program progresses. The criteria used to evaluate the strength of the programs are:
A. | Have you established a conflict minerals sourcing policy? |
E. | Have you implemented due diligence measures for conflict-free sourcing? |
G | Do you review due diligence information received from your suppliers against your company’s expectations? |
H. | Does your review process include corrective action management? |
When suppliers meet or exceed these criteria (Yes to at least A, E, G and H), they are deemed to have a strong program. When suppliers do not meet those criteria, they are deemed to have a weak program. This program categorization can be used in conjunction with other risk assessment factors to enable Manitex International to properly assess supplier relationships as needed to ensure compliance and risk mitigation. As of May 3rd, 2019, 25 suppliers were identified as having a weak program.
We believe that the inquiries and investigations described above represent a reasonable effort to determine the mines or locations of origin of the 3TGs in our Covered Products, including (1) seeking information about 3TG smelters and refiners in our supply chain through requesting that our suppliers complete the CMRT, (2) verifying those smelters and refiners with the expanding RMI lists, (3) conducting the due diligence review, and (4) obtaining additional documentation and verification, as applicable.
Step 3: Design and Implement a Strategy to Respond to Risks
Together with Assent, we developed processes to assess and respond to the risks identified in our supply chain. In response to this risk assessment, the Company has a risk management plan, through which the conflict minerals program is implemented, managed, and monitored. As the program progresses, escalations are sent to nonresponsive suppliers to outline the importance of a response via CMRTs and to outline the required cooperation for compliance to the Conflict Minerals rules. We engage any of our suppliers whom we have reason to believe are supplying us with 3TGs from sources that may support conflict in the Covered Countries to establish an alternative source of 3TG that does not support such conflict, as provided in the OECD Guidance.
Step 4: Carry Out Independent Third Party Audit of Supply Chain Due Diligence
We do not have a direct relationship with any 3TG smelters or refiners and do not perform or direct audits of these entities within our supply chain. Instead, we rely on third-party audits of smelters and refiners conducted as part of RMAP, which uses independent private sector auditors to audit the source, including the mines of origin, and the chain of custody of the conflict minerals used by smelters and refiners that agree to participate in the program.
Step 5: Publicly Report on Supply Chain Due Diligence
We have published our Form SD for the year ended December 31, 2018 and this report on our website at https://www.manitexinternational.com/sec_filings.aspx
4.Due Diligence Results
Survey Results
For the 2018 Reporting Year, 56% of Manitex International’s suppliers have responded to the supply chain survey via the CMRT, version 5.11 or higher. During the RCOI, responses were received that deemed 77 suppliers surveyed could be placed out of scope. These suppliers were excluded from our final response rate. The increase in the out of scope suppliers from FY2017 to FY2018 may be attributable to several factors: 1) the sale of two (2) Manitex divisions in 2016/2017, 2) new vendors/suppliers, and 3) cost cutting to reduce inventory levels where possible therefore no longer using these vendors. Of the received CMRTs, 54% were considered valid. A little over 1% of received CMRTs were considered invalid. Manitex International continues to review its vendor lists and is working with the suppliers to increase the valid response rates.
The large majority of the responses received provided data at a company or divisional level or, as described above, were unable to specify the smelters or refiners used for components supplied to Manitex International. We are therefore unable to determine whether the 3TGs reported by the suppliers were contained in components or parts supplied to us. Furthermore, suppliers did not always provide smelter lists nor were the smelter lists consistently completed with smelter identification numbers and therefore we were unable to validate that any of these smelters or refiners are actually in our supply chain.
Smelters and Refiners
Certain of the responses provided by suppliers to the CMRT included the names of facilities listed by the suppliers as smelters or refiners. We do not typically have a direct relationship with 3TG smelters and refiners and do not perform or direct audits of these entities within our supply chain. Assent compared these facilities listed in the responses to the list of smelters maintained by the Responsible Minerals Initiative (“RMI”) and, if a supplier indicated that the facility was certified as “Conflict-Free,” confirmed that the name was listed by RMI. As of May 3rd, 2019, we have validated 318 smelters or refiners and are working to validate additional smelter/refiner entries from the submitted CMRTs. Of these 318, 254 are certified to be compliant to RMAP conflict-free protocols. Attached at Appendix A, is a full list of all legitimate smelters or refiners that have been declared by our suppliers. Due to the submission of mostly company-level responses, we are not able to determine if all facilities listed can actually be linked to any Manitex products.
As noted above, the current efforts focus on gathering smelter information via the CMRT and, as the program progresses, requiring full completion of all necessary smelter identification information which will enable the validation and disclosure of the smelters as well as the tracing of the 3TGs to their location of origin. Seeking information about 3TG smelters and refiners in our supply chain represents the most reasonable effort we can make to determine the mines or locations of origin of the 3TG in our supply chain.
5.Steps to be taken to mitigate risk
Our conflict minerals program will continue to focus on vetting smelter and refiner data including:
• | Requiring the use of the smelter identification numbers. Supplier responses will not be considered complete without identification numbers. |
• | Suppliers will also be requested to inform Manitex, through Assent, of the correlation between these smelters or refiners and the products and parts they supply to Manitex International and itsin-scope divisions. |
• | A comparison of the facilities identified to the RMI list of smelters. |
• | Efforts to determine mine or location of origin. |
We also intend to take the following steps to enhance the due diligence conducted to further mitigate any risk that the necessary 3TGs in our products could benefit armed groups in the Covered Countries:
• | Continue to include a conflict minerals flow-down clause in new or renewed supplier contracts. We will reemphasize this requirement with our Purchasing Agents. |
• | Continue to engage with suppliers and direct them to training resources to attempt to increase the response rate and improve the content of the supplier survey responses. |
• | Engage any of our suppliers found to be supplying us with 3TGs from sources that directly or indirectly finance armed conflict in the Covered Countries to determine if an alternative source of 3TGs can be found that do not support such armed conflict. |
Appendix A
Potential Smelters and Refiners List
This list includes all of the smelters and refiners listed by our suppliers in their completed CMRTs that appear on the lists of smelters maintained by the RMI. Since most of the CMRTs we received from our suppliers were made on a company or division level basis, rather than on a product-level basis, we are not able to identify which smelters or refiners listed below actually processed the 3TGs contained in our products. Therefore, our list of processing smelters and refiners disclosed here may contain more facilities than those that actually processed the conflict minerals contained in our products.
Metal | Standard Smelter Name | Smelter Facility Location | Smelter ID | |||
Gold | 8853 S.p.A. | ITALY | CID002763 | |||
Gold | Abington Reldan Metals, LLC | UNITED STATES | CID002708 | |||
Gold | Advanced Chemical Company | UNITED STATES | CID000015 | |||
Gold | African Gold Refinery | UGANDA | CID003185 | |||
Gold | Aida Chemical Industries Co., Ltd. | JAPAN | CID000019 | |||
Gold | Al Etihad Gold LLC | UNITED ARAB EMIRATES | CID002560 | |||
Gold | AllgemeineGold-und Silberscheideanstalt A.G. | GERMANY | CID000035 | |||
Gold | Almalyk Mining and Metallurgical Complex (AMMC) | UZBEKISTAN | CID000041 | |||
Gold | AngloGold Ashanti Córrego do Sítio Mineração | BRAZIL | CID000058 | |||
Gold | Argor-Heraeus S.A. | SWITZERLAND | CID000077 | |||
Gold | Asahi Pretec Corp. | JAPAN | CID000082 | |||
Gold | Asahi Refining Canada Ltd. | CANADA | CID000924 | |||
Gold | Asahi Refining USA Inc. | UNITED STATES | CID000920 | |||
Gold | Asaka Riken Co., Ltd. | JAPAN | CID000090 | |||
Gold | Atasay Kuyumculuk Sanayi Ve Ticaret A.S. | TURKEY | CID000103 | |||
Gold | AU Traders and Refiners | SOUTH AFRICA | CID002850 | |||
Gold | Aurubis AG | GERMANY | CID000113 | |||
Gold | Bangalore Refinery | INDIA | CID002863 | |||
Gold | Bangko Sentral ng Pilipinas (Central Bank of the Philippines) | PHILIPPINES | CID000128 | |||
Gold | Boliden AB | SWEDEN | CID000157 | |||
Gold | C. Hafner GmbH + Co. KG | GERMANY | CID000176 | |||
Gold | Caridad | MEXICO | CID000180 | |||
Gold | CCR Refinery - Glencore Canada Corporation | CANADA | CID000185 | |||
Gold | Cendres + Métaux S.A. | SWITZERLAND | CID000189 | |||
Gold | Chimet S.p.A. | ITALY | CID000233 | |||
Gold | Chugai Mining | JAPAN | CID000264 | |||
Gold | Daejin Indus Co., Ltd. | KOREA, REPUBLIC OF | CID000328 | |||
Gold | DayeNon-Ferrous Metals Mining Ltd. | CHINA | CID000343 | |||
Gold | Degussa Sonne / Mond Goldhandel GmbH | GERMANY | CID002867 | |||
Gold | Dijllah Gold Refinery FZC | UNITED ARAB EMIRATES | CID003348 | |||
Gold | DODUCO Contacts and Refining GmbH | GERMANY | CID000362 | |||
Gold | Dowa | JAPAN | CID000401 | |||
Gold | DS PRETECH Co., Ltd. | KOREA, REPUBLIC OF | CID003195 | |||
Gold | DSC (Do Sung Corporation) | KOREA, REPUBLIC OF | CID000359 |
Gold | Eco-System Recycling Co., Ltd. | JAPAN | CID000425 | |||
Gold | Emirates Gold DMCC | UNITED ARAB EMIRATES | CID002561 | |||
Gold | Fidelity Printers and Refiners Ltd. | ZIMBABWE | CID002515 | |||
Gold | Fujairah Gold FZE | UNITED ARAB EMIRATES | CID002584 | |||
Gold | GCC Gujrat Gold Centre Pvt. Ltd. | INDIA | CID002852 | |||
Gold | Geib Refining Corporation | UNITED STATES | CID002459 | |||
Gold | Gold Refinery of Zijin Mining Group Co., Ltd. | CHINA | CID002243 | |||
Gold | Great Wall Precious Metals Co., Ltd. of CBPM | CHINA | CID001909 | |||
Gold | Guangdong Jinding Gold Limited | CHINA | CID002312 | |||
Gold | Guoda Safina High-Tech Environmental Refinery Co., Ltd. | CHINA | CID000651 | |||
Gold | Hangzhou Fuchunjiang Smelting Co., Ltd. | CHINA | CID000671 | |||
Gold | HeeSung | KOREA, REPUBLIC OF | CID000689 | |||
Gold | Heimerle + Meule GmbH | GERMANY | CID000694 | |||
Gold | Heraeus Metals Hong Kong Ltd. | CHINA | CID000707 | |||
Gold | Heraeus Precious Metals GmbH & Co. KG | GERMANY | CID000711 | |||
Gold | Hunan Chenzhou Mining Co., Ltd. | CHINA | CID000767 | |||
Gold | Hunan Guiyang yinxing Nonferrous Smelting Co., Ltd. | CHINA | CID000773 | |||
Gold | Hwasung CJ Co., Ltd. | KOREA, REPUBLIC OF | CID000778 | |||
Gold | Inner Mongolia Qiankun Gold and Silver Refinery Share Co., Ltd. | CHINA | CID000801 | |||
Gold | International Precious Metal Refiners | UNITED ARAB EMIRATES | CID002562 | |||
Gold | Ishifuku Metal Industry Co., Ltd. | JAPAN | CID000807 | |||
Gold | Istanbul Gold Refinery | TURKEY | CID000814 | |||
Gold | Italpreziosi | ITALY | CID002765 | |||
Gold | Japan Mint | JAPAN | CID000823 | |||
Gold | Jiangxi Copper Co., Ltd. | CHINA | CID000855 | |||
Gold | JSC EkaterinburgNon-Ferrous Metal Processing Plant | RUSSIAN FEDERATION | CID000927 | |||
Gold | JSC Uralelectromed | RUSSIAN FEDERATION | CID000929 | |||
Gold | JX Nippon Mining & Metals Co., Ltd. | JAPAN | CID000937 | |||
Gold | Kaloti Precious Metals | UNITED ARAB EMIRATES | CID002563 | |||
Gold | Kazakhmys Smelting LLC | KAZAKHSTAN | CID000956 | |||
Gold | Kazzinc | KAZAKHSTAN | CID000957 | |||
Gold | Kennecott Utah Copper LLC | UNITED STATES | CID000969 | |||
Gold | KGHM Polska Miedz Spolka Akcyjna | POLAND | CID002511 | |||
Gold | Kojima Chemicals Co., Ltd. | JAPAN | CID000981 | |||
Gold | Korea Zinc Co., Ltd. | KOREA, REPUBLIC OF | CID002605 | |||
Gold | Kyrgyzaltyn JSC | KYRGYZSTAN | CID001029 | |||
Gold | Kyshtym Copper-Electrolytic Plant ZAO | RUSSIAN FEDERATION | CID002865 | |||
Gold | L’azurde Company For Jewelry | SAUDI ARABIA | CID001032 | |||
Gold | Lingbao Gold Co., Ltd. | CHINA | CID001056 | |||
Gold | Lingbao Jinyuan Tonghui Refinery Co., Ltd. | CHINA | CID001058 |
Gold | L’Orfebre S.A. | ANDORRA | CID002762 | |||
Gold | LS-NIKKO Copper Inc. | KOREA, REPUBLIC OF | CID001078 | |||
Gold | Luoyang Zijin Yinhui Gold Refinery Co., Ltd. | CHINA | CID001093 | |||
Gold | Marsam Metals | BRAZIL | CID002606 | |||
Gold | Materion | UNITED STATES | CID001113 | |||
Gold | Matsuda Sangyo Co., Ltd. | JAPAN | CID001119 | |||
Gold | Metalor Technologies (Hong Kong) Ltd. | CHINA | CID001149 | |||
Gold | Metalor Technologies (Singapore) Pte., Ltd. | SINGAPORE | CID001152 | |||
Gold | Metalor Technologies (Suzhou) Ltd. | CHINA | CID001147 | |||
Gold | Metalor Technologies S.A. | SWITZERLAND | CID001153 | |||
Gold | Metalor USA Refining Corporation | UNITED STATES | CID001157 | |||
Gold | MetalúrgicaMet-Mex Peñoles S.A. De C.V. | MEXICO | CID001161 | |||
Gold | Mitsubishi Materials Corporation | JAPAN | CID001188 | |||
Gold | Mitsui Mining and Smelting Co., Ltd. | JAPAN | CID001193 | |||
Gold | MMTC-PAMP India Pvt., Ltd. | INDIA | CID002509 | |||
Gold | Modeltech Sdn Bhd | MALAYSIA | CID002857 | |||
Gold | Morris and Watson | NEW ZEALAND | CID002282 | |||
Gold | Morris and Watson Gold Coast | AUSTRALIA | CID002866 | |||
Gold | Moscow Special Alloys Processing Plant | RUSSIAN FEDERATION | CID001204 | |||
Gold | Nadir Metal Rafineri San. Ve Tic. A.Ş. | TURKEY | CID001220 | |||
Gold | Navoi Mining and Metallurgical Combinat | UZBEKISTAN | CID001236 | |||
Gold | NH Recytech Company | KOREA, REPUBLIC OF | CID003189 | |||
Gold | Nihon Material Co., Ltd. | JAPAN | CID001259 | |||
Gold | Ögussa Österreichische Gold- und Silber-Scheideanstalt GmbH | AUSTRIA | CID002779 | |||
Gold | Ohura Precious Metal Industry Co., Ltd. | JAPAN | CID001325 | |||
Gold | OJSC “The Gulidov KrasnoyarskNon-Ferrous Metals Plant” (OJSC Krastsvetmet) | RUSSIAN FEDERATION | CID001326 | |||
Gold | OJSC Novosibirsk Refinery | RUSSIAN FEDERATION | CID000493 | |||
Gold | PAMP S.A. | SWITZERLAND | CID001352 | |||
Gold | Pease & Curren | UNITED STATES | CID002872 | |||
Gold | Penglai Penggang Gold Industry Co., Ltd. | CHINA | CID001362 | |||
Gold | Planta Recuperadora de Metales SpA | CHILE | CID002919 | |||
Gold | Prioksky Plant ofNon-Ferrous Metals | RUSSIAN FEDERATION | CID001386 | |||
Gold | PT Aneka Tambang (Persero) Tbk | INDONESIA | CID001397 | |||
Gold | PX Précinox S.A. | SWITZERLAND | CID001498 | |||
Gold | QG Refining, LLC | UNITED STATES OF AMERICA | CID003324 | |||
Gold | Rand Refinery (Pty) Ltd. | SOUTH AFRICA | CID001512 | |||
Gold | Refinery of Seemine Gold Co., Ltd. | CHINA | CID000522 | |||
Gold | Remondis Argentia B.V. | NETHERLANDS | CID002582 | |||
Gold | Republic Metals Corporation | UNITED STATES | CID002510 |
Gold | Royal Canadian Mint | CANADA | CID001534 | |||
Gold | SAAMP | FRANCE | CID002761 | |||
Gold | Sabin Metal Corp. | UNITED STATES | CID001546 | |||
Gold | Safimet S.p.A | Italy | CID002973 | |||
Gold | SAFINA A.S. | CZECH REPUBLIC | CID002290 | |||
Gold | Sai Refinery | INDIA | CID002853 | |||
Gold | Samduck Precious Metals | KOREA, REPUBLIC OF | CID001555 | |||
Gold | SAMWON Metals Corp. | KOREA, REPUBLIC OF | CID001562 | |||
Gold | SAXONIA Edelmetalle GmbH | GERMANY | CID002777 | |||
Gold | SEMPSA Joyería Platería S.A. | SPAIN | CID001585 | |||
Gold | Shandong Tiancheng Biological Gold Industrial Co., Ltd. | CHINA | CID001619 | |||
Gold | Shandong Zhaojin Gold & Silver Refinery Co., Ltd. | CHINA | CID001622 | |||
Gold | Sichuan Tianze Precious Metals Co., Ltd. | CHINA | CID001736 | |||
Gold | Singway Technology Co., Ltd. | TAIWAN | CID002516 | |||
Gold | SOE Shyolkovsky Factory of Secondary Precious Metals | RUSSIAN FEDERATION | CID001756 | |||
Gold | Solar Applied Materials Technology Corp. | TAIWAN | CID001761 | |||
Gold | State Research Institute Center for Physical Sciences and Technology | LITHUANIA | CID003153 | |||
Gold | Sudan Gold Refinery | SUDAN | CID002567 | |||
Gold | Sumitomo Metal Mining Co., Ltd. | JAPAN | CID001798 | |||
Gold | SungEel HiTech | KOREA, REPUBLIC OF | CID002918 | |||
Gold | T.C.A S.p.A | ITALY | CID002580 | |||
Gold | Tanaka Kikinzoku Kogyo K.K. | JAPAN | CID001875 | |||
Gold | The Refinery of Shandong Gold Mining Co., Ltd. | CHINA | CID001916 | |||
Gold | Tokuriki Honten Co., Ltd. | JAPAN | CID001938 | |||
Gold | Tongling Nonferrous Metals Group Co., Ltd. | CHINA | CID001947 | |||
Gold | Tony Goetz NV | BELGIUM | CID002587 | |||
Gold | TOOTau-Ken-Altyn | KAZAKHSTAN | CID002615 | |||
Gold | Torecom | KOREA, REPUBLIC OF | CID001955 | |||
Gold | Umicore Brasil Ltda. | BRAZIL | CID001977 | |||
Gold | Umicore Precious Metals Thailand | THAILAND | CID002314 | |||
Gold | Umicore S.A. Business Unit Precious Metals Refining | BELGIUM | CID001980 | |||
Gold | United Precious Metal Refining, Inc. | UNITED STATES | CID001993 | |||
Gold | Universal Precious Metals Refining Zambia | ZAMBIA | CID002854 | |||
Gold | Valcambi S.A. | SWITZERLAND | CID002003 | |||
Gold | Western Australian Mint trading as The Perth Mint | AUSTRALIA | CID002030 | |||
Gold | WIELAND Edelmetalle GmbH | GERMANY | CID002778 | |||
Gold | Yamamoto Precious Metal Co., Ltd. | JAPAN | CID002100 | |||
Gold | Yokohama Metal Co., Ltd. | JAPAN | CID002129 | |||
Gold | Yunnan Copper Industry Co., Ltd. | CHINA | CID000197 | |||
Gold | Zhongyuan Gold Smelter of Zhongjin Gold Corporation | CHINA | CID002224 |
Tantalum | Asaka Riken Co., Ltd. | JAPAN | CID000092 | |||
Tantalum | Changsha South Tantalum Niobium Co., Ltd. | CHINA | CID000211 | |||
Tantalum | D Block Metals, LLC | UNITED STATES | CID002504 | |||
Tantalum | Exotech Inc. | UNITED STATES | CID000456 | |||
Tantalum | F&X Electro-Materials Ltd. | CHINA | CID000460 | |||
Tantalum | FIR Metals & Resource Ltd. | CHINA | CID002505 | |||
Tantalum | Global Advanced Metals Aizu | JAPAN | CID002558 | |||
Tantalum | Global Advanced Metals Boyertown | UNITED STATES | CID002557 | |||
Tantalum | Guangdong Rising RareMetals-EO Materials Ltd. | CHINA | CID000291 | |||
Tantalum | Guangdong Zhiyuan New Material Co., Ltd. | CHINA | CID000616 | |||
Tantalum | H.C. Starck Co., Ltd. | THAILAND | CID002544 | |||
Tantalum | H.C. Starck Hermsdorf GmbH | GERMANY | CID002547 | |||
Tantalum | H.C. Starck Inc. | UNITED STATES | CID002548 | |||
Tantalum | H.C. Starck Ltd. | JAPAN | CID002549 | |||
Tantalum | H.C. Starck Smelting GmbH & Co. KG | GERMANY | CID002550 | |||
Tantalum | H.C. Starck Tantalum and Niobium GmbH | GERMANY | CID002545 | |||
Tantalum | Hengyang King Xing Lifeng New Materials Co., Ltd. | CHINA | CID002492 | |||
Tantalum | Jiangxi Dinghai Tantalum & Niobium Co., Ltd. | CHINA | CID002512 | |||
Tantalum | Jiangxi Tuohong New Raw Material | CHINA | CID002842 | |||
Tantalum | Jiujiang Janny New Material Co., Ltd. | CHINA | CID003191 | |||
Tantalum | JiuJiang JinXin Nonferrous Metals Co., Ltd. | CHINA | CID000914 | |||
Tantalum | Jiujiang Tanbre Co., Ltd. | CHINA | CID000917 | |||
Tantalum | Jiujiang Zhongao Tantalum & Niobium Co., Ltd. | CHINA | CID002506 | |||
Tantalum | KEMET Blue Metals | MEXICO | CID002539 | |||
Tantalum | KEMET Blue Powder | UNITED STATES | CID002568 | |||
Tantalum | LSM Brasil S.A. | BRAZIL | CID001076 | |||
Tantalum | Metallurgical Products India Pvt., Ltd. | INDIA | CID001163 | |||
Tantalum | Mineracao Taboca S.A. | BRAZIL | CID001175 | |||
Tantalum | Mitsui Mining and Smelting Co., Ltd. | JAPAN | CID001192 | |||
Tantalum | Ningxia Orient Tantalum Industry Co., Ltd. | CHINA | CID001277 | |||
Tantalum | NPM Silmet AS | ESTONIA | CID001200 | |||
Tantalum | Power Resources Ltd. | MACEDONIA | CID002847 | |||
Tantalum | QuantumClean | UNITED STATES | CID001508 | |||
Tantalum | Resind Industria e Comercio Ltda. | BRAZIL | CID002707 | |||
Tantalum | RFH Tantalum Smeltry Co., Ltd. | CHINA | CID001522 | |||
Tantalum | Solikamsk Magnesium Works OAO | RUSSIAN FEDERATION | CID001769 | |||
Tantalum | Taki Chemicals | JAPAN | CID001869 | |||
Tantalum | Telex Metals | UNITED STATES | CID001891 | |||
Tantalum | Ulba Metallurgical Plant JSC | KAZAKHSTAN | CID001969 | |||
Tantalum | XinXing HaoRong Electronic Material Co., Ltd. | CHINA | CID002508 |
Tin | Alpha | UNITED STATES | CID000292 | |||
Tin | An Vinh Joint Stock Mineral Processing Company | VIET NAM | CID002703 | |||
Tin | Chenzhou Yunxiang Mining and Metallurgy Co., Ltd. | CHINA | CID000228 | |||
Tin | Chifeng Dajingzi Tin Industry Co., Ltd. | CHINA | CID003190 | |||
Tin | China Tin Group Co., Ltd. | CHINA | CID001070 | |||
Tin | CV Ayi Jaya | INDONESIA | CID002570 | |||
Tin | CV Dua Sekawan | INDONESIA | CID002592 | |||
Tin | CV Gita Pesona | INDONESIA | CID000306 | |||
Tin | CV Tiga Sekawan | INDONESIA | CID002593 | |||
Tin | CV United Smelting | INDONESIA | CID000315 | |||
Tin | CV Venus Inti Perkasa | INDONESIA | CID002455 | |||
Tin | Dongguan CiEXPO Environmental Engineering Co., Ltd. | CHINA | CID003356 | |||
Tin | Dowa | JAPAN | CID000402 | |||
Tin | Electro-Mechanical Facility of the Cao Bang Minerals & Metallurgy Joint Stock Company | VIET NAM | CID002572 | |||
Tin | EM Vinto | BOLIVIA | CID000438 | |||
Tin | Estanho de Rondônia S.A. | BRAZIL | CID000448 | |||
Tin | Fenix Metals | POLAND | CID000468 | |||
Tin | Gejiu Fengming Metallurgy Chemical Plant | CHINA | CID002848 | |||
Tin | Gejiu Kai Meng Industry and Trade LLC | CHINA | CID000942 | |||
Tin | GejiuNon-Ferrous Metal Processing Co., Ltd. | CHINA | CID000538 | |||
Tin | Gejiu Yunxin Nonferrous Electrolysis Co., Ltd. | CHINA | CID001908 | |||
Tin | Gejiu Zili Mining And Metallurgy Co., Ltd. | CHINA | CID000555 | |||
Tin | Guangdong HanheNon-ferrous Metal Limited Company | CHINA | CID003116 | |||
Tin | Guanyang Guida Nonferrous Metal Smelting Plant | CHINA | CID002849 | |||
Tin | HuiChang Hill Tin Industry Co., Ltd. | CHINA | CID002844 | |||
Tin | Huichang Jinshunda Tin Co., Ltd. | CHINA | CID000760 | |||
Tin | Jiangxi New Nanshan Technology Ltd. | CHINA | CID001231 | |||
Tin | Magnu’s Minerais Metais e Ligas Ltda. | BRAZIL | CID002468 | |||
Tin | Malaysia Smelting Corporation (MSC) | MALAYSIA | CID001105 | |||
Tin | Melt Metais e Ligas S.A. | BRAZIL | CID002500 | |||
Tin | Metallic Resources, Inc. | UNITED STATES | CID001142 | |||
Tin | Metallo Belgium N.V. | BELGIUM | CID002773 | |||
Tin | Metallo Spain S.L.U. | SPAIN | CID002774 | |||
Tin | Mineracao Taboca S.A. | BRAZIL | CID001173 | |||
Tin | Minsur | PERU | CID001182 | |||
Tin | Mitsubishi Materials Corporation | JAPAN | CID001191 | |||
Tin | Modeltech Sdn Bhd | MALAYSIA | CID002858 | |||
Tin | Nghe TinhNon-Ferrous Metals Joint Stock Company | VIET NAM | CID002573 | |||
Tin | O.M. Manufacturing (Thailand) Co., Ltd. | THAILAND | CID001314 |
Tin | O.M. Manufacturing Philippines, Inc. | PHILIPPINES | CID002517 | |||
Tin | Operaciones Metalurgical S.A. | BOLIVIA | CID001337 | |||
Tin | Pongpipat Company Limited | MYANMAR | CID003208 | |||
Tin | PT Aries Kencana Sejahtera | INDONESIA | CID000309 | |||
Tin | PT Artha Cipta Langgeng | INDONESIA | CID001399 | |||
Tin | PT ATD Makmur Mandiri Jaya | INDONESIA | CID002503 | |||
Tin | PT Babel Inti Perkasa | INDONESIA | CID001402 | |||
Tin | PT Babel Surya Alam Lestari | INDONESIA | CID001406 | |||
Tin | PT Bangka Prima Tin | INDONESIA | CID002776 | |||
Tin | PT Bangka Serumpun | INDONESIA | CID003205 | |||
Tin | PT Bangka Tin Industry | INDONESIA | CID001419 | |||
Tin | PT Belitung Industri Sejahtera | INDONESIA | CID001421 | |||
Tin | PT Bukit Timah | INDONESIA | CID001428 | |||
Tin | PT DS Jaya Abadi | INDONESIA | CID001434 | |||
Tin | PT Inti Stania Prima | INDONESIA | CID002530 | |||
Tin | PT Karimun Mining | INDONESIA | CID001448 | |||
Tin | PT Kijang Jaya Mandiri | INDONESIA | CID002829 | |||
Tin | PT Menara Cipta Mulia | INDONESIA | CID002835 | |||
Tin | PT Mitra Stania Prima | INDONESIA | CID001453 | |||
Tin | PT Panca Mega Persada | INDONESIA | CID001457 | |||
Tin | PT Premium Tin Indonesia | INDONESIA | CID000313 | |||
Tin | PT Prima Timah Utama | INDONESIA | CID001458 | |||
Tin | PT Refined Bangka Tin | INDONESIA | CID001460 | |||
Tin | PT Sariwiguna Binasentosa | INDONESIA | CID001463 | |||
Tin | PT Stanindo Inti Perkasa | INDONESIA | CID001468 | |||
Tin | PT Sukses Inti Makmur | INDONESIA | CID002816 | |||
Tin | PT Sumber Jaya Indah | INDONESIA | CID001471 | |||
Tin | PT Timah (Persero) Tbk Kundur | INDONESIA | CID001477 | |||
Tin | PT Timah (Persero) Tbk Mentok | INDONESIA | CID001482 | |||
Tin | PT Tinindo Inter Nusa | INDONESIA | CID001490 | |||
Tin | PT Tirus Putra Mandiri | INDONESIA | CID002478 | |||
Tin | PT Tommy Utama | INDONESIA | CID001493 | |||
Tin | Resind Industria e Comercio Ltda. | BRAZIL | CID002706 | |||
Tin | Rui Da Hung | TAIWAN | CID001539 | |||
Tin | Soft Metais Ltda. | BRAZIL | CID001758 | |||
Tin | Super Ligas | Brazil | CID002756 | |||
Tin | Thaisarco | THAILAND | CID001898 | |||
Tin | Tin Technology & Refining | UNITED STATES OF AMERICA | CID003325 | |||
Tin | Tuyen QuangNon-Ferrous Metals Joint Stock Company | VIET NAM | CID002574 |
Tin | White Solder Metalurgia e Mineração Ltda. | BRAZIL | CID002036 | |||
Tin | Yunnan ChengfengNon-ferrous Metals Co., Ltd. | CHINA | CID002158 | |||
Tin | Yunnan Tin Company Limited | CHINA | CID002180 | |||
Tungsten | A.L.M.T. TUNGSTEN Corp. | JAPAN | CID000004 | |||
Tungsten | ACL Metais Eireli | BRAZIL | CID002833 | |||
Tungsten | Asia Tungsten Products Vietnam Ltd. | VIET NAM | CID002502 | |||
Tungsten | Chenzhou Diamond Tungsten Products Co., Ltd. | CHINA | CID002513 | |||
Tungsten | Chongyi Zhangyuan Tungsten Co., Ltd. | CHINA | CID000258 | |||
Tungsten | Fujian Jinxin Tungsten Co., Ltd. | CHINA | CID000499 | |||
Tungsten | Ganzhou Haichuang Tungsten Co., Ltd. | CHINA | CID002645 | |||
Tungsten | Ganzhou Huaxing Tungsten Products Co., Ltd. | CHINA | CID000875 | |||
Tungsten | Ganzhou Jiangwu Ferrotungsten Co., Ltd. | CHINA | CID002315 | |||
Tungsten | Ganzhou Seadragon W & Mo Co., Ltd. | CHINA | CID002494 | |||
Tungsten | Ganzhou Yatai Tungsten Co., Ltd. | CHINA | CID002536 | |||
Tungsten | Global Tungsten & Powders Corp. | UNITED STATES | CID000568 | |||
Tungsten | Guangdong Xianglu Tungsten Co., Ltd. | CHINA | CID000218 | |||
Tungsten | H.C. Starck Smelting GmbH & Co.KG | GERMANY | CID002542 | |||
Tungsten | H.C. Starck Tungsten GmbH | GERMANY | CID002541 | |||
Tungsten | Hunan Chenzhou Mining Co., Ltd. | CHINA | CID000766 | |||
Tungsten | Hunan Chuangda Vanadium Tungsten Co., Ltd. Wuji | CHINA | CID002579 | |||
Tungsten | Hunan Chunchang Nonferrous Metals Co., Ltd. | CHINA | CID000769 | |||
Tungsten | Hunan Litian Tungsten Industry Co., Ltd. | CHINA | CID003182 | |||
Tungsten | Hydrometallurg, JSC | RUSSIAN FEDERATION | CID002649 | |||
Tungsten | Japan New Metals Co., Ltd. | JAPAN | CID000825 | |||
Tungsten | Jiangwu H.C. Starck Tungsten Products Co., Ltd. | CHINA | CID002551 | |||
Tungsten | Jiangxi Dayu Longxintai Tungsten Co., Ltd. | CHINA | CID002647 | |||
Tungsten | Jiangxi Gan Bei Tungsten Co., Ltd. | CHINA | CID002321 | |||
Tungsten | Jiangxi Minmetals Gao’anNon-ferrous Metals Co., Ltd. | CHINA | CID002313 | |||
Tungsten | Jiangxi TongguNon-ferrous Metallurgical & Chemical Co., Ltd. | CHINA | CID002318 | |||
Tungsten | Jiangxi Xinsheng Tungsten Industry Co., Ltd. | CHINA | CID002317 | |||
Tungsten | Jiangxi Yaosheng Tungsten Co., Ltd. | CHINA | CID002316 | |||
Tungsten | Kennametal Fallon | UNITED STATES | CID000966 | |||
Tungsten | Kennametal Huntsville | UNITED STATES | CID000105 | |||
Tungsten | Malipo Haiyu Tungsten Co., Ltd. | CHINA | CID002319 | |||
Tungsten | Moliren Ltd | RUSSIAN FEDERATION | CID002845 | |||
Tungsten | Niagara Refining LLC | UNITED STATES | CID002589 | |||
Tungsten | Nui Phao H.C. Starck Tungsten Chemicals Manufacturing LLC | VIET NAM | CID002543 | |||
Tungsten | Philippine Chuangxin Industrial Co., Inc. | PHILIPPINES | CID002827 | |||
Tungsten | South-East Nonferrous Metal Company Limited of Hengyang City | CHINA | CID002815 | |||
Tungsten | Tejing (Vietnam) Tungsten Co., Ltd. | VIET NAM | CID001889 |
Tungsten | Unecha Refractory metals plant | RUSSIAN FEDERATION | CID002724 | |||
Tungsten | Wolfram Bergbau und Hütten AG | AUSTRIA | CID002044 | |||
Tungsten | Woltech Korea Co., Ltd. | KOREA, REPUBLIC OF | CID002843 | |||
Tungsten | Xiamen Tungsten (H.C.) Co., Ltd. | CHINA | CID002320 | |||
Tungsten | Xiamen Tungsten Co., Ltd. | CHINA | CID002082 | |||
Tungsten | Xinfeng Huarui Tungsten & Molybdenum New Material Co., Ltd. | CHINA | CID002830 | |||
Tungsten | Xinhai Rendan Shaoguan Tungsten Co., Ltd. | CHINA | CID002095 |