Clean Energy 10K 2006 Annual report

____________________________________________________________________________________________________________________________________________________________________________

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-KSB

(Mark One)

[X] ANNUAL REPORT UNDER SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED DECEMBER 31, 2006.

[ ] TRANSITION REPORT UNDER SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM ______ TO ________

COMMISSION FILE NO. 333-125678

PROBE MANUFACTURING, INC.

(Exact name of issuer as specified in its charter)

NEVADA 20-2675800

(State or other jurisdiction (I.R.S. Employer

of incorporation or organization) Identification No.)

25242 Arctic Ocean Drive, Lake Forest, CA 92630

(Address of principal executive offices) (Zip Code)

Registrant's telephone number, including area code:(949) 206-6868

Securities registered under Section 12(b) of the Exchange Act: NONE.

Securities registered under Section 12(g) of the Exchange Act:

COMMON STOCK, PAR VALUE $0.001 PER SHARE.

(Title of class)

[ ] Check whether the issuer is not required to file reports pursuant to

Section 13 or 15(d) of the Exchange Act.

Check whether the issuer (1) filed all reports required to be filed by Section

13 or 15(d) of the Exchange Act during the past twelve months (or such shorter

period that the registrant was required to file such reports), and (2) has been

subject to such filing requirements for the past 90 days.

[X] Yes [ ] No

[ ] Check if there is no disclosure of delinquent filers in response to

Item 405 of Regulation S-B contained in this form, and no disclosure will

be contained, to the best of registrant's knowledge, in definitive proxy or

information statements incorporated by reference in Part III of this Form

10-KSB or any amendment to this Form 10-KSB.

Indicate by check mark whether the registrant is a shell company (as defined in

Rule 12b-2 of the Exchange Act).

[ ] Yes [X] No

Page 1 of 40

State issuer's revenues for its most recent fiscal year: $9,310,464

State the aggregate market value of the voting and non-voting common equity held

by non-affiliates computed by reference to the price at which the common equity

was last sold, or the average bid and asked price of such common equity, as of

December 31, 2006: $0.55. The company is currently selling its common equity on the OCTBB.

State the number of shares outstanding of each of the registrant's classes of

common stock as of December 31, 2006: 10,162,608

Transitional Small Business Disclosure Format (Check one): Yes [ ]; No [X]

Page 2 of 40

PROBE MANUFACTURING, INC.

10-KSB

TABLE OF CONTENTS

PART I

PAGE

ITEM 1. DESCRIPTION OF BUSINESS.

ITEM 2. DESCRIPTION OF PROPERTY.

ITEM 3. LEGAL PROCEEDINGS.

ITEM 4. SUBMISSION OF MATTERS TOA VOTE OF SECURITY HOLDERS.

PART II

ITEM 5. MARKET FOR COMMON EQUITY AND RELATED STOCKHOLDER MATTERS.

ITEM 6. MANAGEMENT'S DISCUSSION AND ANALYSIS AND RESULTS OF OPERATIONS.

ITEM 7. FINANCIAL STATEMENTS.

F1-F-31

ITEM 8. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING

AND FINANCIAL DISCLOSURE.

ITEM 8A. CONTROLS AND PROCEDURES.

ITEM 8B. OTHER INFORMATION.

PART III

ITEM 9. DIRECTORS, EXECUTIVE OFFICERS, PROMOTERS AND CONTROL PERSONS;

COMPLIANCE WITH SECTION 16(a) OF THE EXCHANGE ACT.

ITEM 10. EXECUTIVE COMPENSATION.

ITEM 11. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND

MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

ITEM 12. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS.

ITEM 13. EXHIBITS.

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.

Page 3 of 40

PART I

ITEM 1. DESCRIPTION OF BUSINESS.

We incorporated in the State of California on July 7, 1995 as Probe Manufacturing Industries, Inc. On April 21, 2005 we re-domiciled from California to Nevada whereby we changed our name to Probe Manufacturing, Inc. Our business focuses on manufacturing electronics and providing services to original equipment manufacturers (OEMs) of industrial, automotive, semiconductor, medical, communication, military, and high technology products. The services that we provide are commonly referred to as electronics manufacturing services (EMS). We offer our customers comprehensive and integrated design and manufacturing services, from initial product design to production and direct order fulfillment.

Our engineering services include product design, printed circuit board layout, prototyping, and test development. Our supply chain management solutions include purchasing, management of materials, and order fulfillment. Our manufacturing services include surface mount and through-hole assembly, cable assembly, mechanical assembly, and fully integrated box build systems for high complexity electronics.

For example, Probe builds an Engine Control Unit (ECU) for Quantum Fuel Technologies which is used in alternative fuel engines. We have supported this customer from the inception of its product. Our services started with full design review for manufacturability and testability of the product. Once the design review and recommendations were completed we source the materials and procure the components. Then we take responsibility for assembling the components on to the boards, assembling the mechanical parts, installing the product inside the enclosure, and finally we perform a full functional test. Then the finished good product is shipped to the customer, who integrates it in to their final fuel delivery system and it’s delivered to GM.

The majority of our revenue is driven from manufacturing a mix of complex Printed Circuit Card assemblies. Some of the examples of our customers finished goods products include automated fluid dispensing equipments, high performance gas and liquid delivery process modules, which are used in semiconductor fabrication equipment, photonics instrumentation to measure fiber optics, electronic control unit for hydrogen, natural gas, and propane engines, electronic control unit for welding equipment, portable ultrasound and electro-simulation therapy equipment, and target scoring systems for military.

INDUSTRY BACKGROUND

EMS companies are the principal beneficiaries of the increased use of outsourced manufacturing services by the electronics and other industries. Outsourced manufacturing refers to OEMs’ use of EMS companies, rather than internal manufacturing capabilities, to manufacture their products. Historically, EMS companies only manufactured components or sub assemblies. As the EMS industry has evolved, OEMs have increased their reliance on EMS companies for additional, more complex manufacturing services, including collaborative product design services, supply chain management and full box manufacturing. An article by Banc of America Securities stated “that the EMS & electronic supply chain segment is poised to benefit from the increased outsourcing by OEMs. The analysts mention that the EMS segment is likely to grow faster than the broader technical sector in the long run due to the increasing tren d among OEM’s to outsource work.”

EMS companies now often participate in designing, manufacturing and testing of complete systems and manage the entire supply chains of their OEM customers. Industry leading EMS companies offer end-to-end services, including product design and engineering, volume manufacturing, final system assembly and testing, direct order fulfillment, after-sale product service and support and global supply chain management. Increased outsourced manufacturing by OEMs is expected to continue because it allows OEMs to:

Page 4 of 40

• Reduce Operating Costs and Capital Investment.In the current economic environment, OEMs are under significant pressure to reduce manufacturing costs and capital expenditures. EMS companies can provide OEMs with flexible, cost-efficient manufacturing services. In addition, as OEM products have become more technologically advanced, the manufacturing and system test processes have become increasingly automated and complex, requiring significant capital investments. EMS companies enable OEMs to access technologically advanced manufacturing and test equipment and facilities, without additional capital expenditures.

• Focus on Core Competencies.The electronics industry is highly competitive and subject to rapid technological change. As a result, OEMs increasingly are focusing their resources on activities and technologies in which they expect to add the greatest value. By offering comprehensive manufacturing services and supply chain management, EMS companies enable OEMs to focus on their core competencies, including next generation product design and development as well as marketing and sales.

• Access Leading Design and Engineering Capabilities.The design and engineering of electronics products has become more complex and sophisticated and in an effort to become more competitive, OEMs are increasingly relying on EMS companies to provide product design and engineering support services. EMS companies’ design and engineering services can provide OEMs with improvements in the performance, cost and time required to bring products to market. EMS companies are providing more sophisticated design and engineering services to OEMs, including the design and engineering of complete products following an OEM’s development of a product concept.

• Improve Supply Chain Management and Purchasing Power.OEMs face challenges in planning, procuring and managing their inventories efficiently due to fluctuations in customer demand, product design changes, short product life cycles and component price fluctuations. EMS companies employ sophisticated production management systems to manage their procurement and manufacturing processes in an efficient and cost-effective manner so that, where possible, components arrive on a just-in-time, as-and-when needed basis. EMS companies are significant purchasers of electronic components and other raw materials, and can capitalize on the economies of scale associated with their relationships with suppliers to negotiate price discounts, obtain components and other raw materials that are in short supply, and return excess components. EMS companies’ expertise in supply chain management and thei r relationships with suppliers across the supply chain enable them to help OEMs reduce their cost of goods sold and inventory exposure.

• Access Global Manufacturing Services.OEMs seek to reduce their manufacturing costs by having EMS companies manufacture their products in the lowest cost locations that are appropriate for their products and end customers. OEMs also are increasingly requiring particular products to be manufactured simultaneously in multiple locations, often near end users, to bring products to market more quickly, reduce shipping and logistics costs and meet local product content requirements. Global EMS companies are able to satisfy these requirements by capitalizing on their geographically dispersed manufacturing facilities, including those in lower cost regions.

• Accelerate Time to Market.OEMs face increasingly short product life cycles due to increased competition and rapid technological changes. As a result, OEMs need to reduce the time required to bring their products to market. OEMs can bring a product to market faster by using EMS companies’ expertise in new product introduction, including manufacturing design, engineering support and prototype production. OEMs can more quickly achieve volume production of their products by capitalizing on EMS companies’ manufacturing expertise and global presence and infrastructure.

OUR PRODUCTS AND SERVICES

Services We Provide

Engineering. Our approach is to coordinate and integrate our design, prototype and other engineering capabilities. Through this approach, we provide a broad range of engineering services and, in some cases, dedicated production lines for prototypes. These services strengthen our relationships with manufacturing customers and attract new customers requiring specialized engineering services.

Page 5 of 40

To assist customers with initial design, we offer computer assisted engineering, computer assisted design, engineering for manufacturability, circuit board layout and test development. We also coordinate industrial design and tooling for product manufacturing. After product design, we offer quick-turn prototyping, which means a rapid process of prototyping. During this process, we assist with the transition to production. By participating in product design and prototype development, we can reduce manufacturing costs and accelerate the cycle from product introduction to production.

Supply Chain Management. Supply chain management consists of the planning, purchasing, expediting and warehousing of components and materials. Our inventory management and volume procurement capabilities contribute to cost reductions and reduce total cycle time.

Assembly and Manufacturing. Our manufacturing operations include printed circuit board assembly, subsystem assembly, box build and systems integration, the process of integrating sub-systems and downloading software before producing a fully configured product. We purchase the printed circuit boards used in our assembly operations from third parties. We employ various inventory management techniques, such as just-in-time, ship-to-stock and auto-replenish, which are programs designed to ensure timely, convenient and efficient delivery of assembled products to our customers. As OEMs seek to provide greater functionality in smaller products, they increasingly require more sophisticated manufacturing technologies and processes. Our investment in advanced manufacturing equipment and our experience in innovative packaging and interconnect technologies enable us to offer a variety of adv anced manufacturing solutions.

Testing. We offer computer-aided, in-circuit testing of assembled printed circuit boards, which contributes significantly to our ability to deliver high-quality products on a consistent basis. We work with our customers to develop product-specific test strategies. Our test capabilities include manufacturing defect analysis, in-circuit tests to test the circuitry of the board and functional tests to confirm that the board or assembly operates in accordance with its final design and manufacturing specifications. We either custom design test equipment and software ourselves or use test equipment and software provided by our customers. In addition, we provide environmental stress tests of assemblies of boards or systems.

Final System Assembly and Test. We provide final system assembly and test assemblies and modules in which they are combined to form complete, finished products. We integrate printed circuit board assemblies manufactured by us with enclosures, electronic and mechanical sub-assemblies, cables and memory modules. We assemble systems to a specific customer order and we also build to standard configurations. The complex, finished products that we produce typically require extensive test protocols. Our test services include in-circuit testing, functional and environmental tests. We also test products forconformity to applicable industry, product integrity and regulatory standards. Our test engineering expertise enables us to design functional test processes that assess critical performance elements, including hardware, software and reliability. By incorpo rating rigorous test processes into the manufacturing process, we can help to assure customers that their products will function as designed. We provide direct order fulfillment services shipping completed systems directly to the end consumer.

Distribution. We offer our customers flexible, just-in-time delivery programs allowing product shipments to be closely coordinated with customers' inventory requirements. We have the ability to ship products directly into customers' distribution channels or directly to the end-user. We believe that this service can provide our customers with a more comprehensive solution and enable them to be more responsive to market demands.

Direct Order Fulfillment. We provide direct order fulfillment for certain of our OEM customers. Direct order fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel or directly to the end customer. We manage our direct order fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management, including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations, and varying production quantities, including single units. Our direct order fulfillment services include build-to-order (BTO) and configure-to-order (CTO) capabilities. BTO

Page 6 of 40

involves building a system having the particular configuration ordered by the OEM customer. CTO involves configuring systems to an end customer's order. The end customer typically places this order by choosing from a variety of possible system configurations and options. We are capable of meeting a 48 to 72 hour turn-around-time for BTO and CTO by using advanced manufacturing processes. We support our direct order fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems, and processing of customer returns.

STRATEGIC RELATIONSHIPS AND ALLIANCES

Customers

Our current list of customers by their industry and what we help them produce is a follows:

	Name/ Industry	Services & products offered by our customers		Services or products we provide to our customers
Asymtek/ Industrial			Manufacturer of automated fluid dispensing systems.	Materials Procurement, Printed Circuit Card Assembly and Test
Adams Rite			Manufacturer of electronics water dispensing and other related equipment. To aerospace industry	Materials Procurement, Printed Circuit card Assembly, and Test
Celerity Group/ Semiconductor			Manufacturer of gas and liquid delivery process modules that are used in semiconductor fabrication equipment.	Materials Procurement, Printed Circuit card Assembly, and Test.
Jetline Engineering/ Industrial			Manufactures a full range of mechanized welding equipment for all arc and other high energy processes.	Materials Procurement, Printed Circuit Assembly, Test, Mechanical and Full Box Build Assembly.
Mettler Electronics/ Medical			Manufacturer of portable ultrasound and electro-stimulation therapy equipment.	Materials Procurement, Printed Circuit Card Assembly, Test, Mechanical, and Box Build Assembly.
Newport/ Industrial & Instrumentation			Manufactures lasers and precision photonics instrumentation, motion control, wafer handling and assembly automation.	Materials procurement, printed Circuit Card Assembly, Test, Mechanical, and Box Build Assembly.
Quantum/ Automotive			Electronics Control Units for Hydrogen, Natural Gas & Propane engines.	Printed Circuit Card Assembly, test, mechanical assembly and full box build.
Staco Switch/ Industrial			Manufactures Lighted pushbutton switches and ruggedized keyboards and keypads for both military and commercial applications.	Printed Circuit Card Assembly.

We do not have any long term agreements with our customers, and our principal customers may not continue to purchase services from us. The duration of a purchase order is usually from 30 to 360 days. These purchase orders could be cancelled or rescheduled at any time. The part number, quantity, price, workmanship standards, and scheduled delivery dates of the products to be manufactured are determined by written purchase orders given by our customers and accepted or confirmed by us in writing or via email. We agree to deliver theproducts manufactured pursuant to each purchase order in accordance with the

Page 7 of 40

terms and conditions set forth in the purchase order. Probe manufactures hundreds of different types of assemblies on an ongoing basis and each product has a purchase order associated with it.

We currently only focus on attracting and servicing customers in Southern California.

SALES AND MARKETING

Organization

Sales and marketing efforts are divided into segments as follows:

Industrial products

Military products

Automotive products

Communication products

Medical products

Semiconductor products

Our divisional and executive management teams are an integral part of our sales and marketing teams. We generally enter into supply arrangements with our customers. These arrangements, similar to purchase orders, generally govern the conduct of business between our customer and the company relating to, among other things, the manufacture of products which in many cases were previously produced by the customer itself. Such arrangements generally identify the specific products to be manufactured, quality and production requirements, product pricing and materials management. There can be no assurance that at any time these arrangements will remain in effect or be renewed.

Our key customer accounts are managed by a dedicated customer focused team, including a program manager directly responsible for account management. The program manager coordinates activities across divisions to effectively satisfy customer requirements and have direct access to our executive management to quickly address customer concerns. In addition, our executive management, including our chief executive officer, are heavily involved in customer relations and devote significant attention to broadening existing, and developing new, customer relationships.

Sales Approach

Our selling strategy is to convince potential customers to engage Probe as an engineering and supply chain partner, rather than to simply change EMS suppliers. To do this, we perform a full process audit on prospective customer’s operations and make recommendations for technology, quality, delivery and cost improvements. This process has been extremely effective way to demonstrate the ways we can improve the targeted customer’s performance.

In each business segment, there is a dedicated program manager responsible for the maintenance of existing accounts and for development of new accounts. The use of engineers for both sales and technical support tasks allows us to keep a technical advantage over its competition and to spot opportunities for improvement in the field.

SUPPLIERS

We currently procure our materials from a limited number of distributors, thus if a shortage of various components were to occur we would be forced to seek other distributors and our cost of goods could impact our revenues. Our main suppliers of materials include:

Arrow Electronics, Inc. is one of the world's largest distributors of electronic components and computer products and a leading provider of services to the electronics industry, with 2004 sales of $10.7 billion. Headquartered in Melville, New York, Arrow serves as a supply channel partner for more than 600

Page 8 of 40

suppliers and 175,000 original equipment manufacturers, contract manufacturers, and value-added resellers through more than 200 sales facilities and 23 distribution centers in 40 countries and territories.

Future Electronics is the world’s largest distributor specializing in passive, interconnect, and electromechanical components used in commercial and military applications, and they hold the top market share for most of our product lines. Headquartered in Fort Worth, Texas, TTI has 47 locations around the globe: 33 in North America, 11 in Europe and, most recently, 3 in Asia. From these facilities, they provide local service to customers around the world.

We currently do not have long-term agreements with our major suppliers, however, we enter into purchase order agreements. Purchase orders are placed with suppliers based on our material requirement planning (MRP) operating system. When we enter a sales order in our operating system Manex, it generates a list of materials for procurement to satisfy that order. We then issue purchase orders to our suppliers with scheduled deliveries which acts as the only contractual agreements between us and our suppliers.

COMPETITION

The electronic manufacturing services industry is large, competitive and diverse, and is serviced by many companies, including several that have achieved significant market share We compete with numerous domestic and foreign EMS firms, including Benchmark Electronics, Inc.; Celestica Inc; Flextronics International Ltd.; Jabil Circuit, Inc.; Pemstar, Inc.; Plexus Corp.; Sanmina-SCI Corporation; CTS Electronics; Solectron Corporation; SMS Technologies, Inc.; Express Manufacturing, Inc., and others. Because of our market’s size and diversity, we do not typically compete for contracts with a discreet group of competitors. We compete with different companies depending on the type of service or geographic area. Certain of our competitors may have greater manufacturing, financial, research and development and marketing resources. We also face competition from current and prospective customers that evaluate our capabilities against the merits of manufacturing products internally.

COMPETITIVE POSITIONING

We believe our primary competitive advantages are our design, manufacturing, testing and supply chain management capabilities. We offer our customers flexible manufacturing solutions through out the life cycle of their products. These solutions provide accelerated time-to-market, time-to-volume production, and reduced production costs. As a result of working closely with our customers and responding promptly to their needs, we have become an integral part of their operations. In addition, our workforce is led by a management team that has an average of 22 years of industry experience.

PERSONNEL

We presently employ approximately 60 employees, including production team, program management team, material management team, engineering, sales team and quality staff and administrative and management personnel. We have never experienced work stoppages, and are not a party to any collective bargaining agreement.

REGULATORY RESTRICTIONS ON OUR BUSINESS

Our operations, and the operations of businesses that we may acquire, are subject to certain foreign, federal, state and local regulatory requirements relating to environmental, waste management, and health and safety matters. We believe we operate in substantial compliance with all applicable requirements. However, material costs and liabilities may arise from these requirements or from new, modified or more stringent requirements. Material cost may rise due to additional manufacturing cost of raw or made parts with the application of new regulations. Our liabilities may also increase due to additional regulations imposed by foreign, federal, state and local regulatory requirements relating to environmental, waste management, and health and safety matters. In addition, our past, current and future operations, and those of businesses we acquire, may give rise to claims of exposure by employee s or the public or to other claims or liabilities relating to environmental, waste management or health and safety concerns.

Page 9 of 40

ITEM 2. DESCRIPTION OF PROPERTY.

Facilities

From January 1st to March 10, 2006 the Company leased its office and warehouse facilities in Costa Mesa, California from stockholders under an operating lease that required minimum monthly payments of $19,790. The building was sold on March 10, 2006. From March 10, 2006 through September 10, 2006 a new rental agreement was signed with Mitchell-Fitch, LLC which was a month to month (for a maximum of six months) at a monthly rate of $30,580. This consisted of Base rent of $24,068 and additional operating expenses of $6,512. The rental agreement expired on September 10, 2006.

On September 11, 2006 we entered into a sublease agreement for 10,000 sq ft. manufacturing space which includes office space with Quantum Fuel System Technologies Worldwide, Inc. The initial lease is for two years with an option to renew for three years at $8,027 per month. The new facility is located at 25242 Arctic Ocean Drive, Lake Forest, CA 92630

ITEM 3. LEGAL PROCEDINGS.

The Company may be involved from time to time in various claims, lawsuits, and disputes with third parties, action involving allegations or discrimination or breach of contract actions incidental in the normal operations of the business.

As of December 31, 2006 we have the following legal proceedings and legal settlements:

1. Cadence has a judgment against us for $98,000 which was entered by the Superior Court Santa Clara County, California in September 2, 2003. The judgment was due to lack of payment by Probe to Cadence after Probe purchased the license to use its Alegro software program. Due to economic conditions after September 11^th the market for the use of this product disappeared and Probe was not able to resell the services. Consequently, Probe was not able to generate any revenues from reselling of the software and was unable pay Cadence. On August 9^th 2004 we entered into a payment agreement with the Cadence in which we pay them $2,500 a month until such time the debt is paid off. As of December 31, 2006 the balance due to Cadence under the agreement was $8,853.

2. We currently owe the Internal Revenue Service $93,121 for past tax liabilities. We negotiated a settlement with the IRS and have entered into a payment plan with them in which we pay the IRS $3,000 per month. All payments to date are current. The balance is included in other long-term debt.

We believe that there are no other claims or litigation pending, the outcome of which could have a material adverse effect on our financial condition or operating results. However, if litigation should arise and the company was to receive an unfavorable ruling, there is a possibility that it would have a material adverse impact on our financial condition, results of operations, or liquidity of the period in which the ruling occurs, or future periods.

While we are currently able to service any and all payment obligation to the creditors, if we are unable in the future to service any payments, anyone of the creditors may instigate foreclosure proceedings against us. If we are unable to satisfy our obligations, we could be forced into bankruptcy.

Page 10 of 40

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS.

At the Annual Meeting of Stockholders held on September 20, 2006, stockholders elected four directors to serve until the 2007 annual meeting and until their successors are duly elected and qualified. Stockholders of record held 10,162,608 shares of common stock. The votes for each director are as follows:

	For	Withheld
Reza Zarif	10,162,608	0
Kambiz Mahdi	10,162,608	0
Jeffrey Conrad	10,162,608	0
Barrett Evans	10,162,608	0

At the Annual Meeting of Stockholders held on September 20, 2006 the stockholders of record approved the sale of common stock securities to Quantum Fuel Systems Technologies Worldwide, Inc. representing 19.9% of the outstanding stock of Probe Manufacturing, Inc. The stock sale is pending satisfactory completion of the final purchase agreement. The votes for the stock sale are as follows:

	For	Withheld
Approval of Stock Sale*	10,162,608	0

* As of December 31, 2006 this transaction has not been consummated and there is no current timeframe for its completion.

PART II

ITEM 5. MARKET FOR COMMON EQUITY AND RELATED STOCKHOLDER MATTERS.

Bid and ask quotations for our common shares are routinely submitted by registered broker dealers who are members of the National Association of Securities Dealers on the NASD Over-the-Counter Electronic Bulletin Board. These quotations reflect inner-dealer prices, without retail mark-up, mark-down or commission and may not represent actual transactions. The high and low bid information for our shares for each quarter for the last two years, so far as information is reported, through the quarter ended December 31, 2006, as reported by the Bloomberg Financial Network, are as follows:

2006 FISCAL YEAR	High	Low
First Quarter*	$0.00	$0.00
Second Quarter	$0.99	$0.10
Third Quarter	$0.90	$0.65
Fourth Quarter	$0.65	$0.40

* Company was not trading in the public market during the first quarter of 2006.

DIVIDEND POLICY

We have never declared a cash dividend on our common stock and our Board of

Directors does not anticipate that we will pay cash dividends in the foreseeable

future. Any future determination to pay cash dividends will be at the discretion

of our board of directors and will depend upon our financial condition,

operating results, capital requirements, restrictions contained in our

agreements and other factors which our Board of Directors deems relevant.

Page 11 of 40

SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS

The following table summarizes securities authorized for issuance under equity compensation plans:

	Equity Compensation Plan Information
Plan Category	Number of shares of securities to be issued upon exercise of outstanding options, warrants and rights	Weighted-average exercise price of outstanding options, warrants and rights	Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a))
	(a)	(b)	(c )
Equity compensation plans approved by security holders	0	0	0
Equity compensation plans not approved by security holders	455,505	$ 0.52	0
Total	455,505	$ 0.52	0

RECENT SALES OF UNREGISTERED SECURITIES

In February 2006 the company issued 13,438 shares of common stock, in lieu of interest payments at $.80 per share for a total of $10,751.

In May 2006 the company issued 16,336 shares of common stock, in lieu of interest payments at $.80 per share for a total of $13,094.

On May 25, 2006, The Company issued 500,000 shares of common stock at .10 cents (Market value of shares on that date), for a total of $50,000, to compensate its directors for services through a stock grant pursuant to Form S-8 in the following amounts:

Name Common Stock Issued

Kambiz Mahdi 100,000

Reza Zarif 100,000

Barrett Evans 100,000

Jeffrey Conrad

100,000

Dennis Benner

100,000

In August 2006 the company issued 30,254 shares of common stock, in lieu of interest payments at $.80 per share for a total of $24,205.

In August 2006 the company issued 11,678 shares of common stock, in lieu of interest payments at $.80 per share for a total of $9,343.

In August 2006 the company issued 4,205 shares of common stock for officer compensation at $.80 per share for a total of $3,365.

In August 2006 the company accrued 47,260 shares of common stock for officer compensation at $.10 per share (fair market value at time of accrual) for a total of $4,726. These shares had been classified as issued in quarterly filings.

Page 12 of 40

In September 2006 the company accrued 29,083 shares of common stock for officer compensation at $ .65 per share (fair market value at time of accrual) for a total of $18,904.

In December 2006 the company accrued 34,370 shares of common stock for officer compensation at $.55 per share (fair market value at time of accrual) for a total of $18,904

10)

In July 2006 the company converted 12,500 shares from Preferred B to 14,040 shares of Preferred C.

11)

In August 2006 the holders of Preferred Series C elected to convert their 14,040 shares into 1,755,000 shares of common stock.

12)

On August 14, 2006 the holders, converted 440 shares of the Preferred Series A for 4,472,424 shares of the Company’s common stock.

Page 13 of 40

ITEM 6. MANAGEMENT'S DISCUSSION AND ANALYSIS AND RESULTS OF OPERATION.

You should read this section together with our consolidated financial statements

and related notes thereto included elsewhere in this report.

MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIALS CONDITION AND PLAN OF OPERATION

We intend that our forward-looking statements be subject to the safe harbors created by the Exchange Act. The forward-looking statements are generally accompanied by words such as “intend,” “anticipate,” “believe,” “estimate,” “expect” and other similar words and statements and variations or negatives of these words. Our forward-looking statements are based on current expectations, forecasts and assumptions and are subject to risks, uncertainties and changes in condition, significance, value and effect, including those discussed under the heading “Risk Factors” in this report filed with the Securities and Exchange Commission. Such risks, uncertainties and changes in condition, significance, value and effect could cause our actual results to differ materially from our anticipated outcomes. Although we believe that the as sumptions underlying the forward-looking statements are reasonable, any of the assumptions could prove inaccurate. Therefore, we can give no assurance that the results implied by these forward-looking statements will be realized. The inclusion of forward-looking information should not be regarded as a representation by our company or any other person that the future events, plans or expectations contemplated by Probe Manufacturing, Inc. will be achieved. We disclaim any intention or obligation to update or revise any forward-looking statements contained in the documents incorporated by reference herein, whether as a result of new information, future events or otherwise.

Overview

We provide a range of manufacturing and integrated supply chain services to companies who design and market electronic products. Our revenue is generated from sales of our services primarily to customers in the industrial, automotive, semi-conductor and medical devise manufacturers. Because we are a service company,, we’re impacted by our customer’s ability to appropriately predict market demand for their products. While we work with our customers to understand their demand needs, we are removed from the actual end-market served by our customers. Consequently, determining future trends and estimates of activity can be very difficult.

Plan of Operations:

The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. Although, the Company had a net profit of $150,894 for the year ended December 31, 2006, they had a working capital deficit of $132,686 and a total stockholders deficit of $745,462 as of December 31, 2006. The ability of the Company to operate as a going concern is dependent upon its ability (1) to obtain sufficient debt and/or equity capital and/or (2) to continue generating positive cash flow from operations.

Management is taking the following steps to address this situation: (a) continue improving operational efficiencies by: (i) re-negotiating direct material cost with all of our suppliers, (ii) by improving all systems and processes across operations and streamlining production lines, (iii) we have moved into a more economically feasible facility; (b) we have refinanced our lines of credit with agreement(s) that have more attractive terms, as well as increased our credit lines with suppliers; (c) To increase revenue we are acquiring new customers that are a better fit and growing the business with our existing customers. The company is now charging our customers for all services rendered such as equipment programming, delivery and documentation, where in the past, we have often provided these services to our customers as part of the unit price; (d) Manage inventory levels, carrying cos ts and better utilize our supplier credit lines by

Page 14 of 40

implementing bonded inventory levels and auto-release programs with our major suppliers, whereby they maintain stock at their facilities and deliver “Just-in-Time”, however from time to time inventory levels may increase temporarily, due to scheduling issues and acquisition of new customers and / or products.

The future success of the Company is likely dependent on its ability to attain additional capital to support growth and ultimately, upon its ability to continue profitable operations. There can be no assurance that the Company will be successful in obtaining such financing, or that it will attain sufficient positive cash flow from operations. The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, the Company will have sufficient funds to execute their business plans or generate positive operating results. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should the Company be unable to continue as a going concern.

Page 15 of 40

Selected financial data:

The following selected historical financial information of Probe Manufacturing, Inc. has been derived from the historical financial statements and should be read in conjunction with financial statement and notes included herein.

Statement of operations:

Probe Manufacturing, Inc.
Statement of Operations
for the years ended December 31


	2006	2005	2004

Sales	$ 9,310,464	$ 6,351,362	$ 6,204,957
Cost of goods sold	7,019,402	4,953,672	4,988,538
Gross profit	2,291,062	1,397,690	1,216,419

General and administrative	1,875,295	1,823,624	1,965,125
Net profit / (loss) from operations	415,767	(425,934)	(748,706)

Other income / (expenses)	(37,408)	(53,768)	275,228
Interest expense	(227,465)	(156,003)	(445,112)
Net profit / (loss) before income taxes	150,894	(634,105)	(918,590)
Income tax expense / (benefit)	0	0	0
Net profit / (loss)	$ 150,894	$ (634,105)	$ (918,590)


Per Share Information:
Basic weighted average number
of common shares outstanding	6,222,272	3,193,981	4,152,149

Net Profit / (Loss) per common share	$ 0.04	$ (0.20)	$ (0.22)


Per Share Information:
Diluted, weighted average number
of common shares outstanding	�� 9,250,330	3,193,981	4,152,149

Diluted, Net Profit / (Loss) per common share	$ .016	(0.20)	(0.22)

Condensed Balance sheet data:

Page 16 of 40

PROBE MANUFACTURING, INC.
Condensed Balance sheet
as of December 31,
		2006	2005	2004

	Working Capital	$ (132,688)	$ (501,461)	$ (564,310)
	Total Assets	2,286,121	2,404,470	1,982,940
	Long term Debt	930,616	914,040	1,136,358
	Stockholder Equity	(745,462)	(1,049,649)	(1,012,438)

Summary of Results:

For the year ended December 31, 2006 we generated a net profit of $150,894 compared to net losses of ($634,105) for the same period in 2005 and net losses of ($918,590) for the same period in 2004.

For the year ended December 31, 2006 our revenue increased by 46% to 9,310,464 compared to 6,351,362 in the same period in 2005. In the twelve month period ended December 31, 2006 our revenue increased by 50 % compared to 6,204,957 in the same period in 2004.

For the year ended December 31, 2006 our cost of goods sold, was reduced to 75% from 78% and 80% in the same period in 2005 and 2004 respectively.

In the twelve month period ended December 31, 2006 our gross margins increased to 25% from 22% and 20% in the same period in 2005 and 2004 respectively.

For the year ended December 31, 2006 our SG&A cost was reduced to 20% from 29% and 32% for the same period in 2005 and 2004 respectively.

Our working capital improved by $368,773 and stockholder equity improved by $304,187 from December 31, 2005 to December 31, 2006.

Our improvements in performance for the year ended December 31, 2006 were primarily due to increase in revenues and continuation of process improvement efforts initiated in the 4th quarter of 2005. We anticipate flat sales in the 1st and 2nd quarter of 2007 due to customer reduction in re-orders and one of our major customers moving high volume business to low cost regions.

Key performance indicators:

	Twelve month period ended December 31
	2006	2005	2004
Inventory Turns	4.34	3.32	6.33
Days Sales in Backlog	159	80	125
Days Receivables Outstanding	39	44	29
Days Payables Outstanding	37	38	57

Inventory turns: are calculated as the ratio of cost of material compared to the average inventory for the quarter. Despite substantial increase in revenues, the twelve month period ended December 31, 2006 our inventory turns improved to 4.34 compared to 3.32 and 6.33 in 2005 and 2004 respectively.

Page 17 of 40

Days Sales in Backlog is calculated based on our back log divided by average daily sales during the quarter. For the year ended December 31, 2006, Days Sales in Backlog increased to 159 days from 80 and 125 days in the same period in 2005 and 2004 respectively.

Days Receivables Outstanding is calculated as the ratio of average accounts payable during the fiscal year compared to average daily sales for the same period, this has improved as a result in improved collection efforts.

Days Payable Outstanding, is calculated as the ratio of average accounts payable during the fiscal year compared to daily cost of sales for the same period.

Critical Accounting Policies

The Company follows United States generally accepted accounting principles. Certain of the principles involve selection among alternatives and choices of methods, which are described in the footnotes to the Company’s reviewed financial statements.

Cash and Cash Equivalents

The Company maintains the majority of its cash accounts at a commercial bank. The total cash balance is insured by the Federal Deposit Insurance Corporation (“FDIC”) up to $100,000 per commercial bank. For purposes of the statement of cash flows, the Company considers all cash and highly liquid investments with initial maturities of one year or less to be cash equivalents.

Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Such estimates may be materially different from actual financial results. Significant estimates include the recoverability of long-lived assets, the collectibility of accounts receivable and valuation of inventory and reserves.

Accounts Receivable

The Company grants credit to its customers within the United States of America, and does not require collateral. The Company’s ability to collect receivables is affected by economic fluctuations in the geographic areas and industries served by the Company.

Reserves for un-collectable amounts are provided, based on past experience and a specific analysis of the accounts. Although the Company expects to collect amounts due, actual collections may differ from the estimated amounts. As of December 31, 2006, the Company had a reserve for potentially un-collectable accounts of $35,212.

Five (5) customers accounted for approximately 88% of accounts receivable at December 31, 2006. The Company’s trade accounts primarily represent unsecured receivables. Historically, the Company’s bad debt write-offs related to these trade accounts have been insignificant.

Inventory

Inventories are valued at the lower of weighted average cost or market value. Our industry experiences changes in technology, changes in market value and availability of the raw materials, as well as changing customer demand. The Company makes provisions for estimated excess and obsolete inventories based on regular audits and cycle counts of our on-hand inventory levels and forecasted customer demands and at times additional provisions are made. Any inventory write offs are charged to the reserve account. As of December 31, 2006, the Company had a reserve for potentially obsolete inventory of $335,759.

Page 18 of 40

Property and Equipment

Property and equipment are stated at cost. Assets held under capital leases are recorded at lease inception at the lower of the present value of the minimum lease payments or the fair market value of the related assets. The Company follows the practice of capitalizing property and equipment purchased over $5000. The cost of ordinary maintenance and repairs is charged to operations. Depreciation and amortization are computed on the straight-line method over the following estimated useful lives of the related assets are as follows:

Furniture and fixtures

3 to 7 years

Equipment

7 to 10 years

Leasehold improvements

2 years (life of the lease)

Long –Lived Assets

The Company’s management assesses the recoverability of its long-lived assets by determining whether the depreciation and amortization of long lived assets over their remaining lives can be recovered through projected undiscounted future cash flows. The amount of long lived asset impairment if any, is measured based on fair value and is charged to operations in the period in which long lived assets impairment is determined by management. There can be no assurance however, that market conditions will not change or demand for the Company’s services will continue, which could result in impairment of long-lived assets in the future.

Revenue Recognition

Revenue from product and services are recognized at the time goods are shipped or services are provided to the customer, with an appropriate provision for returns and allowances. Terms are generally FOB Origination with the right of inspection and acceptance. The company has not experienced a material amount of rejected or damaged product.

Fair Value of Financial Instruments

The carrying amount of accounts payable and accrued expenses are considered to be representative of their respective fair values because of the short-term nature of these financial instruments.

Other Comprehensive Income

The Company has no material components of other comprehensive income (loss) and accordingly, net loss is equal to comprehensive loss in all periods.

Net Profit / (Loss) per Common Share

Basic profit / (loss) per share is computed on the basis of the weighted average number of common shares outstanding. For the period ended December 31, 2005, all of the Company's common stock equivalents were excluded from the calculation of diluted loss per common share because they were anti-dilutive, due to the Company's net loss in that year. At December 31, 2006 the company had outstanding common shares of 10,162,608, and 110,713 shares to be issued for officer compensation, for a total of 10,273,321, used in the calculation of basic earnings per share. Weighted average common shares and equivalents at December 31, 2006 were 6,222,272. As of December, 31, 2006 the company had outstanding warrants to purchase 4,076,250 additional common shares which may dilute future earnings per share. Fully diluted weighted average Common shares and equivalents at December 31, 2006 were 9,250,33 0

Segment Information

The Corporation operates primarily in a single operating segment, providing printed circuit boards and electronic assemblies.

Page 19 of 40

Stock Based Compensation

SFAS No. 123, “Accounting for Stock-Based Compensation” (“SFAS No. 123’) allows an entity to elect to continue to measure compensation cost under Accounting Principles Board Opinion No. 25, “Accounting for Stock Issued to Employees” (“APB No. 25”), but requires pro forma disclosures of net loss and loss per share as if the fair-valued-based method of accounting had been applied. In accordance with SFAS 123, the Company elected to continue to measure compensation cost under APB No. 25, and comply with the pro forma disclosure requirements.

The Company has adopted for footnote disclosure purposes SFAS No. 123, which requires that companies disclose the cost of stock-based employee compensation at the grant date based on the value of the award (the fair value method) and disclose this cost over the service period. The value of the stock-based award is determined using a pricing model whereby compensation cost is the excess of the fair value of the award as determined by the model at grant date or other measurement date over the amount an employee must pay to acquire the stock.

Transactions in which goods or services are received from non-employees for the issuance of equity securities or stock-based awards are accounted for based on the fair value of the consideration received.

Income Taxes

The Company accounts for income taxes under SFAS No. 109, which requires the asset and liability approach to accounting for income taxes. Under this method, deferred tax assets and liabilities are measured based on differences between financial reporting and tax bases of assets and liabilities measured using enacted tax rates and laws that are expected to be in effect when differences are expected to reverse. The net profit for the year ended December 31, 2006 of $150,894 is offset by previous losses. As of December 30, 2005, the company had a net operating loss carry forward of ($858,589). The company has not booked any deferred tax asset as a result.

Result of operations:

The following table summarizes certain items in the statements of operations as a percentage of net sales. The financial information and the discussion below should be read in conjunction with the accompanying financial statements and notes thereto.

Probe Manufacturing, Inc.
Statement of Operations Percentage Based
for the years ended December 31,
	2006	2005	2004

Sales	100%	100%	100%
Cost of goods sold	75%	78%	80%
Gross profit	25%	22%	20%

General and administrative	20%	29%	32%
Net profit / (loss) from operations	4%	(7%)	(12%)

Other income / (expenses)	0%	(1%)	4%
Interest expense	(2%)	(2%)	(7%)
Net profit / (loss) before income taxes	2%	(10%)	(15%)
Income tax expense / (benefit)
Net profit / (loss)	(2%)	(10%)	(15%)

Page 20 of 40

Net Sales

For the year ended December 31, 2006 our revenue increased by 46% to $9,310,464 compared to $6,351,362 in the same period in 2005. In the twelve month period ended December 31, 2006 our revenue increased by 50% compared to $6,204,957 in the same period in 2004. This increase was mainly due to introduction of new customers and increased orders from existing customers.

Major Customers

Our top 5 customers accounted for approximately 86% of net sales for the year ended December 31, 2006 compared to 85%, and 88% for the same period in 2005 and 2004 respectively. However, the top 3 customer concentration was reduced to 69% for the year ended December 31, 2006 compared to 78% and 79% in the same period in 2005 and 2004 respectively. Although we have been growing our sales in 2006, we believe that our ability to grow our core business depends on increasing sales to existing customers and on successfully attracting new customers. Customer contracts can be canceled and volume levels can be changed or delayed based on our customer’s performance and the end users’ markets which we have no control over. The timely replacement of delayed, canceled or reduced orders with new business cannot be ensured. In addition, we cannot assume that any of our current customers will continue to utilize our services. Consequently, our results of operations may be materially adversely affected.

Gross Profit

For the year ended December 31, 2006 our gross profits increased to 25% from 22% and 20% in the same period in 2005 and 2004 respectively. This improvement is primarily due to increased revenue and improved operational efficiencies. Our gross profits could vary from period to period and is affected by a number of factors, including product mix, production efficiencies, component availability and costs, pricing, competition, customer requirements and unanticipated restructuring or inventory charges.

Selling, General and Administrative (SG&A) Expenses

For the year ended December 31, 2006 our SG&A expenses decreased to 20% compared to 29% and 32% for the same period in 2005 and 2004 respectively. This decrease in percentage is mainly due to higher revenue levels in the 12 month period ended December 31, 2006. In May 2006, we issued 500,000 shares of common stock, valued at $.10 ($50,000) to our Board of Directors for services, in March 2007 we paid a one time charge of $37K in late fees and payments to terminate our lease from Costa Mesa facility. Both of these expenses were booked under SG&A expense.

Net Income/ (Loss) from operations

For the year ended December 31, 2006, our net income from operations was 4% compared to net losses of (7%) and (12%) for the same period ending 2005 and 2004 respectively. The increase in net profits was due, primarily to increased revenue and continued operational efficiencies.

We reduced our interest rate from 20% to 12% in August 2006 by refinancing our lines of credit into term notes.

Page 21 of 40

Liquidity and Capital Resources:

PROBE MANUFACTURING, INC.
Condensed Statements of Cash Flows
for the years ended December 31, 2006

	2006	2005	2004
Net Cash provided / (Used) In Operating Activities	$608,028	$(969,076)	$(1,613,540)
Cash Flows Used In Investing Activities	(214,025)	(7,082)	(13,945)
Cash Flows Provided / (used) By Financing Activities	(351,423)	935,756	1,667,887
Net (Decrease) Increase in Cash and Cash Equivalents	$42,580	$(40,402)	$40,402

We generated net cash from our operating activities of $608,028 for the year ended December 31, 2006, compared to cash used in operating activities of ($969,076) and ($1,613,540) for the years ended December 31, 2005 and 2004 respectively.

We paid down debt by $351,423 for the year ended December 31, 2006, compared to borrowing $935,756 and 1,667,887 for the years ended December 31, 2005 and 2004 respectively.

The following is a summary of certain obligations and commitments as of December 31, 2006 for continuing operations:

Capital Requirements for long-term Obligations	2007	2008	2009
Notes Payable	$605,503	$866,178	$0
Other Long term debt	79,092	39,284	17,497
Capital Lease Settlement Obligations	497,500	0	0
Total	$1,182,095	$905,462	$17,497

Off-balance Sheet Arrangement

We currently have no off-balance sheet arrangements.

RISKS ABOUT OUR BUSINESS

OUR INDEPENDENT ACCOUNTANTS HAVE ISSUED A GOING CONCERN OPINION AND IF WE CANNOT OBTAIN ADDITIONAL FINANCING AND/OR REDUCE OUR OPERATING COSTS SUFFICIENTLY, WE MAY HAVE TO CURTAIL OPERATIONS AND MAY ULTIMATELY CEASE TO EXIST.

The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. Although, the Company had a net profit of $150,894 for the year ended, December 31, 2006, they had a working capital deficit of $132,686 and a total stockholders deficit of $745,462 as of December 31, 2006. The ability of the Company to operate as a going concern is dependent upon its ability (1) to obtain sufficient debt and/or equity capital and/or (2) to continue generating positive cash flow from operations.

Page 22 of 40

WE HAVE AN ACCUMULATED DEFICIT AND MAY INCUR ADDITIONAL LOSSES, THEREFORE WE MAY NOT BE ABLE TO OBTAIN THE ADDITIONAL FINANCING NEEDED FOR WORKING CAPITAL, CAPITAL EXPENDITURES AND TO MEET OUR DEBT SERVICE OBLIGATIONS.

As of December 31, 2006, we had current liabilities of ($2,100,964). Our debt could limit our ability to obtain additional financing for working capital, capital expenditures, debt service requirements, or other purposes in the future, as needed; to plan for, or react to, changes in technology and in our business and competition; and to react in the event of an economic downturn.

We may not be able to meet our debt service obligations. If we are unable to generate sufficient cash flow or obtain funds for required payments, or if we fail to comply with covenants in our revolving lines of credit, we will be in default.

WE FACE INTENSE COMPETITION, WHICH MAY REDUCE OUR SALES, OPERATING PROFITS, OR BOTH.

The market segments in which we compete are rapidly evolving and intensely competitive.The electronic manufacturing service or “EMS” industry is extremely competitive and includes hundreds of companies, several of which have achieved substantial market share. We compete with numerous domestic and foreign EMS firms, including Benchmark Electronics, Inc.; Celestica Inc; Flextronics International Ltd.; Jabil Circuit, Inc.; Pemstar, Inc.; Plexus Corp.; Sanmina-SCI Corporation; CTS Electronics; Solectron Corporation; SMS Technologies, Inc.; Express Manufacturing, Inc. and others. Current and prospective customers also evaluate our capabilities against the merits of internal production. Some of our competitors may have greater design, manufacturing, financial or other resources than us. Additionally, we face competition from Taiwanese ODM suppliers, who have a substantial share of the g lobal market for information technology hardware production, primarily related to notebook and desktop computers and personal computer motherboards, as well as provide consumer products and other technology manufacturing services.

In recent years, many participants in the industry, including us, have substantially expanded their manufacturing capacity. The overall demand for electronics manufacturing services has decreased, resulting in increased capacity and substantial pricing pressures, which has harmed our operating results. Certain sectors of the EMS industry are currently experiencing increased price competition, and if this increased level of competition should continue, our revenues and gross margin may continue to be adversely affected.

WE MAY BE ADVERSELY AFFECTED BY SHORTAGES OF REQUIRED ELECTRONIC COMPONENTS. IN ADDITION, WE DEPEND ON A LIMITED NUMBER OF SUPPLIERS TO PROCURE OUR PARTS FOR PRODUCTION WHICH IF AVAILABILITY OF PRODUCTS BECOMES COMPROMISED IT COULD ADD TO OUR COST OF GOODS SOLD AND AFFECT OUR REVENUE GROWTH.

At various times, there have been shortages of some of the electronic components that we use, as a result of strong demand for those components or problems experienced by suppliers. These unanticipated component shortages have resulted in curtailed production or delays in production, which prevented us from making scheduled shipments to customers in the past and may do so in the future. Our inability to make scheduled shipments could cause us to experience a reduction in our sales and an increase in our costs and could adversely affect our relationship with existing customers as well as prospective customers. Component shortages may also increase our cost of goods sold because we may be required to pay higher prices for components in short supply and redesign or reconfigure products to accommodate substitute components. As a result, component shortages could adversely affect our operating results for a p articular period due to the resulting revenue shortfall and increased manufacturing or component costs. In addition, we depend upon a number of major suppliers for our products. We do not have long-term agreements with our major suppliers, except for our purchase orders. There is an inherent risk that certain products will be unavailable for prompt delivery or, in some cases, discontinued. We will have only limited control over

Page 23 of 40

any third-party manufacturer as to quality controls, timeliness of production and deliveries and various other factors. Lack of long-term agreement with our major suppliers could also impact material availability and could delay shipments. Should the availability of products be compromised, it could also force us to develop alternative products, which could add to the cost of goods sold and compromise delivery commitments.

OUR PRINCIPAL SHAREHOLDERS, DIRECTORS AND EXECUTIVE OFFICERS , IN THE AGGREGATE, BENEFICIALLY OWN MORE THAN 50% OF OUR OUTSTANDING COMMON STOCK AND THESE SHAREHOLDERS, IF ACTING TOGETHER, WILL BE ABLE TO EXERT SUBSTANTIAL INFLUENCE OVER ALL MATTERS REQUIRING APPROVAL OF OUR SHAREHOLDERS.

Our principal shareholders, directors and executive officers in the aggregate, beneficially own more than 50%our outstanding common stock on a fully diluted basis. These shareholders, if acting together, will be able to exert substantial influence over all matters requiring approval of our shareholders, including amendments to our Articles of Incorporation, fundamental corporate transactions such as mergers, acquisitions, the sale of the company, and other matters involving the direction of our business and affairs and specifically the ability to determine the members of our board of directors. (See: “Principal Shareholders”)

WE CURRENTLY SERVICE AND ATTEMPT TO OBTAIN THE MAJORITY OF OUR CUSTOMERS IN THE LIMITED GEOGRAPHIC OF SOUTHERN CALIFORNIA WHICH IS A SMALL ADDRESSABLE MARKET AND COULD BE SUBJECT TO ECONOMIC HARDSHIP OR SLOWDOWN, AS A RESULT OUR GROWTH COULD BE LIMITED AND ADVERSELY AFFECT OUR PROJECTED SALES AND OPERATING INCOME.

We currently service, attempt to solicit new, and direct majority of our marketing efforts to customers in the Southern California region. This is a very small addressable market which ultimately limits the amount of growth we could experience. In addition, this region could experience an economic recession or other market contraction which would cause our current customers and any potential customers to also contract their businesses as well and cease outsourcing any current products that we currently service and would attempt to obtain. Both the size of the market and any potential economic hardship affecting this small regional market could adversely affect our project sales and operating incomer. If we are forced to expand our marketing efforts outside this region we could also incur significant costs in an attempt to penetrate other regional or national markets.

WE DEPEND ON LOW TO MEDIUM VOLUME HIGH MIX TECHNOLOGY PRODUCTS THAT ARE BUILT DOMESTICALLY. THESE APPLICATIONS INCLUDE INDUSTRIAL INSTRUMENTATION AND SCIENTIFIC COMMUNICATION, SEMICONDUCTOR AND AUTOMOTIVE PRODUCTS, WHICH CONTINUALLY PRODUCE TECHNOLOGICALLY ADVANCED PRODUCTS WITH SHORT LIFE CYCLES; OUR INABILITY TO CONTINUALLY MANUFACTURE SUCH PRODUCTS ON A COST-EFFECTIVE BASIS COULD HARM OUR BUSINESS.

During the twelve months ended December 31, 2006 we derived approximately 40% of our revenue from customers in the industrial product sector, whose products include adhesive dispensing equipment and motion controllers; 27% of our revenues from customers in the semiconductor industry, whose products include mass flow controllers; 18% from customers in medical device manufacturing 5% from customers in aerospace industry and 10% from alternative fuel and other misc. industries

Factors affecting these industries in general could seriously harm our customers and, as a result, us. These factors include:

Rapid changes in technology, which result in short product life cycles, often reduce the volume and market share for our customers and ultimately us. It will lead to the loss of previous design wins and frequent new product introductions and substantial development costs. This could result in loss of revenue and it could adversely affect our operating income.

Page 24 of 40

Seasonality of demand for our customers’ products would force our customers to manage their inventories for seasonal variations and inventory management and excess build ups. Customers could dramatically increase their request for production quantities, which could cause lead time problems with getting the components or we may not be able to build enough products which could have loss of revenue for our customers. As a result we could lose these customers and it would adversely affect our projected sales. If the projected sales will not materialize, we will have loss of revenue and reduced margins. Any cancellation or delay in production would also have the same adverse effect on our sales projections and profitability.

The inability of our customers to successfully market their products, and the failure of these products to gain widespread commercial acceptance; could effect their long term business plans and sales. Our success depends upon the ability of our customers to successfully market their products and if they fail, it could result in cancellations or rescheduling orders lower sales volume and operating income.

Recessionary periods in our customers’ markets will affect both our customers and our overall business output. It would require dramatic changes to the overall business model, layoffs and major adjustments to the business overhead. If we fail to adjust to new recessionary environment, our business would be adversely affected and we may not be able to compete successfully against other companies in our industry and achieve profitability.

THE MAJORITY OF OUR SALES COME FROM A SMALL NUMBER OF CUSTOMERS WITH WHOM WE DO NOT HAVE LONG TERM CONTRACTS; IF WE LOSE ANY OF THESE CUSTOMERS, OUR SALES COULD DECLINE SIGNIFICANTLY.

Sales to our five largest customers have represented a significant percentage of our net sales in recent periods. Our five largest customers accounted for approximately 88% of net sales during the twelve months ended December 31, 2006.

Our principal customers have varied from year to year, and our principal customers may not continue to purchase services from us at current levels, if at all. Significant reductions in sales to any of these customers, or the loss of major customers, would seriously harm our business. If we are not able to timely replace expired, canceled or reduced contracts with new business, our revenues could be harmed.

The part number, quantity, price, workmanship standards, and scheduled delivery dates of the products to be Manufactured are determined by written purchase orders given by our customers and accepted or confirmed by us in writing or via email. We agree to deliver the products manufactured pursuant to each purchase order in accordance with the terms and conditions set forth in the purchase order. Probe manufactures hundreds of different types of assemblies on an ongoing basis and each product has a purchase order associated with it. Please see attcahed filing of several samples of these purchase orders.

Our top five customers include, Celerity Group, Newport Corporation, Asymtek Corporation, Jetline Engineering, and Newport Medical.

IF WE LOSE KEY SENIOR MANAGEMENT PERSONNEL OUR BUSINESS COULD BE NEGATIVELY AFFECTED. FURTHER, WE WILL NEED TO RECRUIT AND RETAIN ADDITIONAL SKILLED MANAGEMENT PERSONNEL AND IF WE ARE NOT ABLE TO DO SO, OUR BUSINESS AND OUR ABILITY TO CONTINUE TO GROW COULD BE HARMED.

Page 25 of 40

Our success depends to a large extent upon the continued services of our executive officers. Generally our employees are not bound by employment or non-competition agreements, and we cannot assure that we will retain our executive officers and other key employees. We could be seriously harmed by the loss of any of our executive officers. In order to manage our growth, we will need to recruit and retain additional skilled management personnel and if we are not able to do so, our business and our ability to continue to grow could be harmed. Although a number of companies in our industry have implemented workforce reductions, there remains substantial competition for highly skilled employees. Our failure to recruit and retain experienced design engineers could limit the growth of our ODM activities, which could adversely affect our business.

WE ARE SUBJECT TO ENVIRONMENTAL COMPLIANCE RISKS AND UNEXPECTED COSTS THAT WE MAY INCUR WITH RESPECT TO ENVIRONMENTAL MATTERS MAY RESULT IN ADDITIONAL LOSS CONTINGENCIES, THE QUANTIFICATION OF WHICH CANNOT BE DETERMINED AT THIS TIME.

We are subject to various federal, state, local and foreign environmental laws and regulations, including those governing the use, storage, discharge and disposal of hazardous substances in the ordinary course of our manufacturing process. If more stringent compliance or cleanup standards under environmental laws or regulations are imposed, or the results of future testing and analyses at our current or former operating facilities indicate that we are responsible for the release of hazardous substances, we may be subject to additional remediation liability. Further, additional environmental matters may arise in the future at sites where no problem is currently known or at sites that we may acquire in the future. Currently unexpected costs that we may incur with respect to environmental matters may result in additional loss contingencies, the quantification of which cannot be determined at this time.

Page 26 of 40

FINANCIAL STATEMENTS.

TABLE OF CONTENTS

PAGE

INDEPENDENT AUDITORS' REPORT

F-1

BALANCE SHEETS

F-3

STATEMENTS OF OPERATIONS

F-5

STATEMENTS OF CASH FLOWS

F-7

STATEMENTS OF STOCKHOLDERS' EQUITY (DEFICIT)

F-9

NOTES TO FINANCIAL STATEMENTS

F-10

Page 27 of 40

FINANCIAL STATEMENTS

JASPERS + HALL, PC

CERTIFIED PUBLIC ACCOUNTANTS

9175 E Kenyon Avenue

Denver, CO 80237

303-796-0099

Board of Directors

Probe Manufacturing, Inc.

Lake Forest,California

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We have audited the accompanying balance sheets of Probe Manufacturing, Inc. as of December 31, 2006 and 2005, and the related statements of operations, stockholders’ deficit and cash flows for the years then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Probe Manufacturing, Inc., as of December 31, 2006 and 2005, and the results of their operations and their cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the financial statements, the Company’s accumulated deficit from operations and its difficulties in maintaining sufficient working capital raise substantial doubt about its ability to continue as a going concern. Management’s plans concerning these matters are also described in Note 1. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

F-1

Jaspers + Hall, PC

Denver, Colorado

March 8, 2007

F-2

PROBE MANUFACTURING, INC.
Balance Sheet

		December 31, 2006	December 31, 2005
Assets
Current Assets:
	Cash	$ 42,580	$ -
	Accounts receivable - trade - net	902,767	692,212
	Inventory	1,022,931	1,296,386
	Prepaid expenses	-	50,020
	Total Current Assets	1,968,278	2,038,618
Property And Equipment - Net		317,843	337,889
Deposits		-	27,963
Total Assets		$ 2,286,121	$ 2,404,470

Liabilities And Stockholders' Deficit
Current Liabilities:
	Bank overdraft	$ -	$ 154,596
	Accounts payable - trade	629,598	691,694
	Accrued Expenses	273,487	282,503
	Line of credit borrowings	-	732,838
	Notes payable	23,496	456,000
	Current Portion of LT Debt	1,174,383	222,448
	Total Current Liabilities	2,100,964	2,540,079
Long-Term Debt:
	Other long-term debt	1,346,595	265,573
	Capital lease settlement obligations	758,408	870,915
	Less Current portion of Long Term Debt	(1,174,383)	(222,448)
	Total Long-Term Debt	930,620	914,040
Total Liabilities		3,031,584	3,454,119

Stockholders' Deficit:
	Preferred A stock, stated value $1,000 per share; 440 shares
	authorized; 0 and 440 shares issued and outstanding	-	440,000
	Preferred B stock, stated value $100 per share; 20,000 shares
	authorized; 0 and 12,500 shares issued and outstanding	-	1,250,000
	Preferred C stock, stated value $100 per share; 20,000 shares
	authorized; 0 and 0 shares issued and outstanding	-	-
	Common Stock to issue	42,533	-
	Common stock, $.001 par value; 200,000,000 shares authorized;
	10,162,608 and 3,359,243 shares issued and outstanding, respectively.	10,162	3,359
	Additional paid-in capital	60,431	(1,733,525)
	Accumulated deficit	(858,589)	(1,009,483)
	Total Stockholders' Deficit	(745,463)	(1,049,649)

F-3

Total Liabilities And Stockholders' Deficit

$ 2,286,121

$ 2,404,470

The accompanying footnotes are an integral part of these financial statements

F-4

Probe Manufacturing, Inc.
Statement of Operations
for the years ended December 31



	2006	2005

Sales	$ 9,310,464	$ 6,351,362
Cost Of Goods Sold	7,019,402	4,953,672
Gross Profit	2,291,062	1,397,690

General And Administrative	1,875,295	1,822,024
Net Profit / (Loss) From Operations	415,767	(424,334)

Other Income / (Expenses)	(37,408)	(53,768)
Interest Expense	(227,465)	(156,003)
Net Profit / (Loss) Before Income Taxes	150,894	(634,105)
Income Tax Expense	-	-
Net Profit / (Loss)	$ 150,894	$ (634,105)


Per Share Information:
Basic weighted average number
of common shares outstanding	6,222,272	3,418,497

Net Profit / (Loss) per common share	$ 0.024	$ (0.185)


Per Share Information:
Diluted, weighted average number
of common shares outstanding	9,250,330	3,418,497

Diluted, Net Profit / (Loss) per common share	$ 0.016	$ (0.185)

The accompanying footnotes are an integral part of these financial statements

F-5

PROBE MANUFACTURING, INC.
Statements of Cash Flows
for the years ended December 31


		2006	2005
Cash Flows from Operating Activities:
	Net Income / ( Loss )	$ 150,894	$ (634,105)
	Adjustments to reconcile net loss to net cash
	used in operating activities:
	Depreciation and amortization	234,071	215,020
	Impairment Loss		132,403
	Debt forgiveness		(78,472)
	Stock issued for Interest	57,394	24,894
	Stock issued for Services	95,898
	Changes in assets and liabilities:
	(Increase) decrease in accounts receivable	(210,555)	(190,779)
	(Increase) decrease in inventory	273,455	(603,571)
	(Increase) decrease in other assets	77,983	(7,923)
	(Decrease) increase in accounts payable	(62,096)	161,935
	Other (Decrease) increase in accrued expenses	(9,016)	11,522
Net Cash provided / (Used) In Operating Activities		608,028	(969,076)

Other Expenses
	Purchase of property and equipment	(214,025)	(7,082)
Cash Flows Used In Investing Activities		(214,025)	(7,082)

Cash Flows from Financing Activities
	Bank Overdraft / (Repayment)	(154,596)	54,029
	Borrowings / (Payments) under line of credit, net	(732,838)	517,775
	Principal payments on capital lease settlement obligations	(112,507)	(98,916)
	Proceeds from sale of stock	-	572,000
	Proceeds / (Payments) on notes payable	648,518	(109,132)
Cash Flows Provided / (used) By Financing Activities		(351,423)	935,756

Net (Decrease) Increase in Cash and Cash Equivalents		42,580	(40,402)

Cash and Cash Equivalents at Beginning of Period		-	40,402

Cash and Cash Equivalents at End of Period		$ 42,580	$ -
		-
Supplemental Information:
	Interest Paid	$ 143,894	$ 156,003
	Income Taxes Paid	$ -	$ -
	Lines of credit converted to Long term Notes Payable	$ 705,000	$ -

The accompanying footnotes are an integral part of these financial statements

F-6

Probe Manufacturing, Inc.
Statement of Stockholders Equity
for the Year ended December 31, 2006


	Preferred Stock A $1,000 Stated Value		Preferred Stock B $100 Stated Value		Preferred Stock C No Par		Common Stock .001 Par		Shares to be Issued		Additional Paid in Capital	Accumulated Deficit	Stockholders' Deficit Totals
	Shares	Amount	Shares	Amount	Shares	Amount	Shares	Amount	Shares	Amount	Additional Paid in Capital	Accumulated Deficit	Stockholders' Deficit Totals
Balance, December 31, 2004	440	440,000	12,500	$1,250,000	-	$ -	2,613,125	$ 2,613			$(2,329,673)	$ (375,378)	$ (1,012,438)

Stock issued for cash							715,000	715			571,285		572,000

Stock issued in lieu of Interest payments							31,118	31			24,863		24,894
Net Loss								-				(634,105)	(634,105)
Balance 12/31/05	440	440,000	12,500	1,250,000	-	-	3,359,243	3,359			(1,733,525)	(1,009,483)	(1,049,649)

Stock Issued in lieu of Interest Payments							71,736	72	-	-	57,322	-	57,394

Stock Issued for Compensation							4,205	4	110,713	42,533	3,361	-	45,898
													-
Stock issued for Services							500,000	500			49,500		50,000
													-
Stock Converted from Preferred B to Preferred C			(12,500)	(1,250,000)	14,040	1,404,000					(154,000)	-	-
													-
Series C Conversion @ .80					(14,040)	(1,404,000)	1,755,000	1,755			1,402,245		-
													-
Series A Conversion shares @ 44%	-440	(440,000)					4,472,424	4,472			435,528		-
													-
Net Income 2006												150,894	150,894

F-7

Balance 12/31/06

10,162,608

$10,162

110,713

$42,533

$60,431

$ (858,589)

$(745,463)

The accompanying footnotes are an integral part of these financial statements

F-8

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

Notes 1-GENERAL

The Company

Probe Manufacturing Industries, Inc. was incorporated on July 7, 1995.On April 21, 2005, the Company was redomiciled from California to Nevada and changed its name to Probe Manufacturing, Inc. Probe Manufacturing, Inc. (the “Company” or “Probe”) is a leading provider of advanced electronics manufacturing services, or EMS, to original equipment manufacturers, or OEMs, primarily in the industrial and instrumentation, communication, semiconductor, automotive, medical, and military segments. This includes globally integrated end to end manufacturing solutions ranging from engineering printed circuit card assembly, cable assembly, enclosures, complete system integration and test, as well as global order fulfillment.

Going Concern

The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. Although, the Company had a net profit of $150,894 for the year ended, December 31, 2006, they had a working capital deficit of $132,686 and a total stockholders deficit of $745,462 as of December 31, 2006. The ability of the Company to operate as a going concern is dependent upon its ability (1) to obtain sufficient debt and/or equity capital and/or (2) to continue generating positive cash flow from operations.

The future success of the Company is likely dependent on its ability to attain additional capital to support growth and ultimately, upon its ability to maintain profitable operations. There can be no assurance that the Company will be successful in obtaining such financing, or that it will attain sufficient positive cash flow from operations. The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, the Company will have sufficient funds to execute their business plans or generate positive operating results. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should the Company be unable to continue as a going concern.

F-9

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 2 –SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES:

Cash and Cash Equivalents

Estimates

Accounts Receivable

The Company grants credit to its customer’s within the United States of America and does not require collateral. The Company’s ability to collect receivables is affected by economic fluctuations in the geographic areas and industries served by the Company.

Inventory

Property and Equipment

Property and equipment are stated at cost. Assets held under capital leases are recorded at lease inception at the lower of the present value of the minimum lease payments or the fair market value of the related assets. The Company follows the practice of capitalizing property and equipment purchased over $5,000. The cost of ordinary maintenance and repairs is charged to operations. Depreciation and amortization are computed on the straight-line method over the following estimated useful lives of the related assets are as follows:

F-10

Furniture and fixtures

3 to 7 years

Equipment

7 to 10 years

Leasehold improvements

2 years (life of the lease)

F-11

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 2 –SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES: (Continued)

Long –Lived Assets

Revenue Recognition

Fair Value of Financial Instruments

The carrying amount of accounts payable and accrued expenses are considered to be representative of their respective fair values because of the short-term nature of these financial instruments.

Other Comprehensive Income

The Company has no material components of other comprehensive income (loss) and accordingly, net loss is equal to comprehensive loss in all periods.

Net Profit / (Loss) per Common Share

Segment Information

The Corporation operates primarily in a single operating segment, providing printed circuit boards and electronic assemblies.

Stock Based Compensation

The Company has adopted for footnote disclosure purposes SFAS No. 123, which requires that company’s disclose the cost of stock-based employee compensation at the grant date based on the value of the award (the fair value method) and disclose this cost over the service period. The value of the stock-based award is determined using a pricing model whereby compensation cost is the excess of the fair value of the award as

F-12

determined by the model at grant date or other measurement date over the amount an employee must pay to acquire the stock.

F-13

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 2 –SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES: (Continued)

Income Taxes

NOTE 3 -INVENTORY

Inventories at December 31, 2006 by major classification were comprised of the following:

Raw Material	$972,511
Work in Process	379,497
Finished Goods	6,681
Total	1,358,689
Less Reserve for excess or obsolete inventory	(335,759)
Net Inventory	$1,022,931

NOTE 4 –PROPERTY AND EQUIPMENT

Property and equipment were comprised of the following at December 31, 2006:

Furniture and fixtures	$ 547,607
Equipment	2,671,444
Leasehold improvements	$197,144
Total	3,416,193
Less accumulated depreciation and amortization	(3,498,450)
Net Fixed Assets	$ 317,844

NOTE 5 –ACCRUED EXPENSES

As of December 31, 2006, the Company had accrued expenses in the amount of $273,487, which included the following:

Sales tax payable	298
Accrued wages	53,850
Accrued Interest notes payable	6,157
Accrued property taxes	13,133
Accrued rent payable	32,108
Accrued professional fees	53,000
Accrued utilities	18,000
Accrued vacation	96,942
Total accrued liabilities	273,487

F-14

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 6 –LINES OF CREDIT

The Company had a revolving line of credit (the “Line”) with a financial institution, which allowed them to borrow a maximum of $1,100,000 based on 80% of eligible accounts receivable, as defined. Borrowings under the Line, bore interest at prime (4.25% plus 10.5% per annum) were secured by substantially all of the Company’s assets and was personally guaranteed by the stockholders. In March 2004 the Line was restructured into a term loan in the amount of $500,000. Terms of the Note were: (1) monthly installment payments of $5,000, (2) interest at the rate of 4% plus the prime rate by the agent (3) secured by accounts receivable (4) with a discount provision of $200,000 after timely payments of the first $300,000. In December 2004, the note was restructured into a new line of credit and discounted by $200,000. This new line of credit allows the Company to borrow a maximum of $100,000 based on 80% of eligible accounts receivables, payable in monthly installments of $5,000 plus interest at the rate of 4% plus the prime-lending rate. This Note was paid in full on March 10, 2006.

The Company had additional lines of credit in the amount of $875,000 with related parties, secured by assets of the company. Borrowings under the Line of credit bear interest at the rate of 20% (12% paid in cash and 8% paid in common stock in the company) per annum. As of August 10, 2006 the Company had an outstanding balance against this line of credit in the amount of $705,000, which includes a $50,000 short term demand note with an employee which bears an interest rate at of 15% per annum. These notes were converted to term notes payable, with an effective date of June 30, 2006, with interest rates of 12% per annum and a 36 month amortization, with balloon payments of $714,802 due on April 15, 2008. As of December 31, 2006 the outstanding balance was $655,409.

NOTE 7 -CAPITAL LEASE SETTLEMENT OBLIGATIONS

On July 9, 1997 and December 21, 1997, the Company entered into two lease agreements, with Crocker capital, which subsequently assigned the leases to The CIT Group. In September 2004, the Company had outstanding balances of $457,604 and $556,293 on the two leases and was unable to make the monthly lease payments and as a result entered into a forbearance agreement with The CIT Group, with monthly payments of $7,500 and an early payment schedule as follows:

The CIT Group would release the Company and its guarantors if one of the following payments were made, less the total of all monthly payments made to that date:

$375,000 if paid by October 25 , 2004

$425,000 if paid by December 25, 2004

$500,000 if paid by June 25, 2005

$550,000 if paid by December 25, 2005

$600,000 if paid by June 25, 2006

$650,000 if paid by December 25, 2006

$700,000 if paid by June 25, 2007

In any event the Company must Pay $700,000 less the total payments made of $212,500 for a final payment of $487,500 by June 25, 2007. As of December 31, 2006, the note payable balance of $745,686 is carried per the original payment schedule.

F-15

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 8 – NOTES PAYABLE

A) Note Payable – secured by deed of trust, 12% interest, originally due on

September 2005 to Ashford Capital Transition Fund I, LP, and was subsequently extended to March 2006.

The balance of Note $456,000 was paid in full on March 10, 2006.

B) Note Payable - dated March 10, 2006 – related party, unsecured, 12% interest and ten monthly payments in the amount of $3,650 plus accrued interest. The 1^st payment was due on April 10, 2006. The note is payable to Kambiz Mahdi. As of December 31, 2006 the note balance is $11,749.

C) Note Payable - dated March 10, 2006 – related party, unsecured, 12% interest, and ten monthly payments in the amount of $3,650 plus accrued interest. The 1^st payment was due on April 10, 2006. The note is payable to Reza Zarif. As of December 31, 2006 the note balance is $11,749.

D) Note Payable - dated March 10, 2006 – related party, special use, line of credit in the amount of $45,000, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock), due May 10, 2007. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, 12% interest rate, with a 36 month amortization, payments of $1,001 and a balloon payment of $16,588 on April 15, 2008. As of December 31, 2006 the outstanding balance was $28,034. This note is payable to Kambiz Mahdi

E) Note Payable - dated March 10, 2006 – related party, special use, line of credit in the amount of $45,000, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock), due May 10, 2007. , This note was converted to a Term Note Payable, with an effective date of June 30, 2006, Un-secured, 12% interest rate, with a 36 month amortization, payments of $1,001 and a balloon payment of $16,588 on April 15, 2008. As of December 31, 2006 the outstanding balance was $28,034. This note is payable to Reza Zarif

F) Note Payable - dated March 10, 2006 – special use, line of credit in the amount of $90,000, unsecured, 12% interest paid in Cash., due May 10, 2007. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, 12% interest rate, with a 36 month amortization, payments of $1,997 and a balloon payment of $33,068 on April 15, 2008. As of December 31, 2006 the outstanding balance was $55,885. This note is payable to Ashford Capital, LLC

G) Note Payable – related party, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock) due on May 10, 2007, Payable to Kambiz Mahdi. This note was converted to a term note payable, with an effective date of June 30, 2006, Un-secured, At 12% interest rate, with a 36 month amortization, payments of $7,871 and a balloon payment of $130,366 on April 15, 2008. As of December 31, 2006 the outstanding balance was $220,316.

H) Note Payable – related party, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock) due on May 10, 2007, Payable to Reza Zarif. This note was converted to a term note payable, with an effective date of June 30, 2006, Un-secured, At 12% interest rate, with a 36 month amortization, payments of $7,871 and a balloon payment of $130,366 on April 15, 2008. As of December 31, 2006 the outstanding balance was $220,316.

I) Note Payable – related party. This note was an operating line of credit, secured by the assets of the company. Borrowings under this line of credit were at an interest rate of 20% (12% paid in cash and 8% paid in common stock in the company) per annum, payable to Rufina Paniego. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, 12% interest rate, with a 36 month amortization, payments of $2,491 and a balloon payment of $41,257 on April 15, 2008. As of December 31, 2006 the Company had an outstanding balance against this line of credit in the amount of $69,724.

F-16

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 8 – NOTES PAYABLE - Continued

J) Note Payable – related party. This note was an operating line of credit, secured by the assets of the company. Borrowings under this line of credit were at an interest rate of 20% (12% paid in cash and 8% paid in common stock in the company) per annum, payable to eFund Capital Partners. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, at 12% interest rate, with a 36 month amortization, payments of $4,982 and a balloon payment of $82,516 on April 15, 2008. As of December 31, 2006 the Company had an outstanding balance against this line of credit in the amount of $139,449.

K) Note Payable – This Note was an operating line of credit, secured by the assets of the company, Borrowings under this line of credit were at an interest rate of 20% (12% paid in cash and 8% paid in common stock in the company) per annum, payable to Benner Exemption Trust. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, at 12% interest rate, with a 36 month amortization, payments of $4,650 and a balloon payment of $77,014 on April 15, 2008. As of December 31, 2006 the Company had an outstanding balance against this line of credit in the amount of $130,152.

L) Note Payable – This Note was an operating line of credit, secured by the assets of the company, Borrowings under this line of credit were at an interest rate of 20% (12% paid in cash and 8% paid in common stock in the company) per annum, payable to Ed Lassiter. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, at 12% interest rate, with a 36 month amortization, payments of $$1,660 and a balloon payment of $57,398 on April 15, 2008. As of December 31, 2006 the Company had an outstanding balance against this line of credit in the amount of $130,152.

M) Note Payable -- This Note was an operating line of credit, secured by the assets of the company, Borrowings under this line of credit were at an interest rate of 20% (12% paid in cash and 8% paid in common stock in the company) per annum, payable to William Duncan. This note was converted to a Term Note Payable, with an effective date of June 30, 2006, unsecured, at 12% interest rate, with a 36 month amortization, payments of $4,650 and a balloon payment of $77,014 on April 15, 2008. As of December 31, 2006 the Company had an outstanding balance against this line of credit in the amount of $46,483.

Other Long-Term Debt

Other long-term debt consists of settlements reached with I-Source, a supplier. Monthly payments are $2,500. As of December 31, 2006 their balance was $36,925. Payments continue through May, 2008.

F-17

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 9 – COMMITMENTS AND CONTIGENCIES

Operating Rental Leases

From January 1st to May 10, 2006 the Company leased its office and warehouse facilities in Costa Mesa, California from stockholders under an operating lease that required minimum monthly payments of $19,790. The building was sold on March 10, 2006. From March 10, 2006 through September 10, 2006 a new rental agreement was signed with Mitchell-Fitch, LLC which was a month to month (for a maximum of six months) at a monthly rate of $30,580. This consisted of Base rent of $24,068 and additional operating expenses of $6,512. The rental agreement expired on September 10, 2006.

On September 11, 2006 we entered into a sublease agreement for 17,500 sq ft. manufacturing space which includes office space with Quantum Fuel System Technologies Worldwide, Inc. The initial lease is for two years with an option to renew for three years at $8,027 per month. The new facility is located at 25242 Arctic Ocean Drive, Lake Forest, CA 92630.

Litigation

As of December 31, 2006 we have the following legal proceedings and legal settlements:

F-18

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 10 – CAPITAL STOCK TRANSACTIONS

Board of Director Actions:

On April 21, 2005, the Company’s Board of Directors and shareholders approved the following capital stock transactions:

The Company re-domiciled in the state of Nevada, whereby increasing the number of authorized common shares to 200,000,000 and designating a par value of $.001 per share.

On May 25, 2006, the Company’s Board of Directors and shareholders approved the following capital stock transactions:

an amendment to the Articles of Incorporation of the Company authorizing a new series of Preferred stock, which shall be designated as Series C, and shall consist of 15,000 shares.

Transactions:

From June 16, 2004 to April 1, 2005 the Company sold 2,221,250 shares of common stock Private Placement Memorandum at $.80 per Share to 49 individuals generating net proceeds of $1,777,000, of which 715,000 shares were sold in 2005, generating net proceeds of $572,000.

During 2005 the company issued 31,118 shares of common stock, in lieu of interest payments at $.80 per share for a total of $24,894.

In February 2006 the company issued 13,438 shares of common stock, in lieu of interest payments at $.80 per share for a total of $10,751.

In May 2006 the company issued 16,336 shares of common stock, in lieu of interest payments at $.80 per share for a total of $13,094.

On May 25, 2006, The Company issued 500,000 shares of common stock at .10 cents (Market value of shares on that date), for a total of $50,000, to compensate its directors for the past two years of service through a stock grant pursuant to Form S-8 in the following amounts:

Name Common Stock Issued

Kambiz Mahdi 100,000

Reza Zarif 100,000

Barrett Evans 100,000

Jeffrey Conrad

100,000

Dennis Benner

100,000

In August 2006 the company issued 30,254 shares of common stock, in lieu of interest payments at $.80 per share for a total of $24,205.

In August 2006 the company issued 11,678 shares of common stock, in lieu of interest payments at $.80 per share for a total of $9,343.

In August 2006 the company issued 4,205 shares of common stock for officer compensation at $.80 per share for a total of $3,365.

10)

In September 2006 the company accrued 29,083 shares of common stock for officer compensation at $ .65 per share (fair market value at time of accrual) for a total of $18,904.

11)

In December 2006 the company accrued 34,370 shares of common stock for officer compensation at $.55 per share (fair market value at time of accrual) for a total of $18,904.

F-19

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 10 – CAPITAL STOCK TRANSACTIONS – continued

Transactions - continued:

12)

In July 2006 the company converted 12,500 shares from Preferred B to Preferred C, 14,040 shares.

13)

In August 2006 the holders, converted of the Preferred series C elected to convert their 14,040 shares into 1,755,000 shares of common stock.

14)

On August 14, 2006 the holders, converted 440 shares of the Preferred Series A for 4,472,424 shares of the company’s common stock.

COMMON STOCK

Our Articles of Incorporation authorize us to issue 200,000,000 shares of common stock, par value $0.001 per share. As of December 31, 2006 and December 31, 2005 there were 10,270,863 and 3,359,243 shares of common stock issued and outstanding, respectively. All outstanding shares of common stock are, and the common stock to be issued in this offering will be, fully paid and non-assessable. Each share of our common stock has identical rights and privileges in every respect. The holders of our common stock are entitled to vote upon all matters submitted to a vote of our shareholders and are entitled to one vote for each share of common stock held. There are no cumulative voting rights.

The holders of our common stock are entitled to share equally in dividends and other distributions that our Board of Directors may declare from time to time out of funds legally available for that purpose, if any, after the satisfaction of any prior rights and preferences of any outstanding preferred stock. If we liquidate, dissolve or wind up, the holders of shares of common stock will be entitled to share ratably in the distribution of all of our assets remaining available for distribution after satisfaction of all our liabilities and our obligations to holders of our outstanding preferred stock.

PREFERRED STOCK

Our Articles of Incorporation authorize us to issue 10,000,000 shares of preferred stock. We authorized 440 as Series A Convertible Preferred Stock and have authorized 20,000 shares of Series B Convertible Preferred Stock. On May 25^th, 2006 the Articles of Incorporation were amended, authorizing 15,000 shares Series C Convertible Preferred Stock.

Preferred Series A

As of June 30, 2006, there were 440 shares of Convertible A Preferred Stock outstanding, with a stated value of $1,000. Each share is convertible into 0.1% percent of the shares of our common stock outstanding at the date of conversion. The shares shall convert election of the holder, The holder of the Convertible A Preferred Stock, has the right to vote, with the holders of common stock, on any matter to which the common stock holders are entitled to vote, the number of shares of common stock into which the Convertible A Preferred Stock is convertible. If we are liquidated, distribute our assets, dissolve or wind-up, the holders of Convertible A Preferred Stock shall receive the greater of (i) $2,500 per share of Convertible A Preferred Stock they hold at the time of such Liquidation, or (ii) their pro rata share of the total value of our assets and funds to be distributed, assuming the Convertible A pr eferred stock is converted to common stock. On August 14, 2006 the holders, converted 440 shares of the Preferred Series A for 4,472,424 shares of the company’s common stock.

F-20

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 10 – CAPITAL STOCK TRANSACTIONS – continued

Preferred Series B

As of March 31, 2006 there were 12,500 shares of Series B Convertible stock outstanding, with a stated value of $100. Each share of Series B Stock shall be converted into a number of shares of common stock that is equal to each share being divided by the average of the 3 lowest intraday bids in the twenty (20) days prior to conversion multiplied by 100 (1 divided by x, multiplied by 100), or 125 shares per Series B, whichever is greater. The minimum conversion price which Series B shareholders shall be to convert their Series B shares to common stock shall be $0.10. The Series B Stock shall have voting rights and voting will be on an as converted basis, with class votes for the election of directors, any transaction in which control of the Company is transferred in which the per share price consideration received by Purchaser is less than Nine (3) times the Purchase Price, the sale of the Company o f all or substantially all of its assets, liquidation or winding up of the Company and any amendment to the Company’s By-Laws or Articles of Incorporation in a manner adverse to Series B Stock. In the event of any voluntary or involuntary liquidation, distribution of assets (other than the payment of dividends), dissolution or winding-up of the Company, Series B Stock shall have preferential rights to the Company’s common stock (the “Common Stock”) whereby Series B Stock shall get two times (2x) return on its capital. Once Series B Stock has recouped its two times (2x) return on capital then Series B Stock shall participate, on a pro rata basis, based on the number of shares of the Company’s common stock (the “Common Stock”) into which the Series B Stock are convertible at the time of the liquidation, distribution of assets, dissolution or winding-up.

Exchange of Preferred Series B to Preferred Series C

On May 25^th the Board of Directors approved the exchange of Series B Convertible Preferred Stock for Series C No-Par, Convertible Preferred Stock for its Series B stockholders. After the exchange took place Series B Convertible Preferred Stock was cancelled. The Series C Convertible Preferred Stock carries the same rights as Series B Convertible Preferred Stock except that Series C Convertible Preferred Stock can be redeemed by the Company. At any time, the Company may, in its sole discretion, redeem some or all of the outstanding shares of Series C Stock at a “Redemption Price” equal to the greater $120.00 per share for the first year from the date of this Certificate and after which the Redemption Price shall increase by twelve percent (12%) per year until all outstanding shares of Series C have been redeemed. To redeem Series C Stock, the Company, at least five (5) days prior to the date on which it desires to redeem such stock (the “Redemption Date”), shall send the applicable holder of Series C Stock a notice of the redemption, provided, however, that failure to give such notice or any defect therein or in the mailing thereof shall not affect the validity of the proceedings for the redemption of any shares of Series C Stock. Such notice shall state: (i) the Redemption Date; (ii) the Redemption Price; and (iii) the number of shares of Series C Stock to be redeemed. Furthermore, the holders of Series C Convertible Preferred Stock shall receive one A Warrant and one B warrant for every share of common stock received from converting a share of Series C Convertible Preferred stock of the Company’s A and B Warrants pursuant to the terms and conditions of the Company’s Series A and B warrant agreement as amended

F-21

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 10 – CAPITAL STOCK TRANSACTIONS – continued

Preferred Series C

As of June 30,2 006 there were 14,040 shares of Convertible C Preferred Stock outstanding. Originally as filed on May 25, 2006 each share of Series C Stock shall be converted into a number of shares of Common Stock that is equal to each share being divided by the average of the 3 lowest intraday bids in the twenty (20) days prior to conversion or $0.10, which ever is greater, multiplied by 100 (1 divided by x, multiplied by 100), or 125 shares per Series C, whichever is greater. However, on August 07, 2006 the terms of Series C were amended as follows: Each share of Series C Stock shall be converted into a number of shares of Common Stock that is equal to each share being divided $0.80 multiplied by 100 (1 divided by $0.80, multiplied by 100).

On August 14, 2006, the holders of Preferred Series C elected to convert their shares into common stock.

As a result 14, 040 shares of Preferred Series C were converted into 1,755,000 shares of common stock.

Our Board of Directors has the authority to issue additional shares of preferred stock in one or more series, and fix for each series, the designation of, and number of shares to be included in, each such series. Our Board of Directors is also authorized to set the powers, privileges, preferences, and relative participating, optional or other rights, if any, of the shares of each such series and the qualifications, limitations or restrictions of the shares of each such series.

Unless our Board of Directors provides otherwise, the shares of all series of preferred stock will rank on parity with respect to the payment of dividends and to the distribution of assets upon liquidation. Any issuance by us of shares of our preferred stock may have the effect of delaying, deferring or preventing a change of our control or an unsolicited acquisition proposal. The issuance of preferred stock also could decrease the amount of earnings and assets available for distribution to the holders of common stock or could adversely affect the rights and powers, including voting rights, of the holders of common stock.

F-22

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

WARRANTS

Series A -Common Stock Warrants:

We currently have 407,625 Series A Warrants issued and outstanding. Each warrant gives the holder the right to purchase 5 shares of common stock at $1.00 per share. The Series A Warrants will expire on November 15, 2007.

Series B -Common Stock Warrants

We currently have 407,625 Series B Warrants issued and outstanding. Each warrant gives the holder the right to purchase 5 shares of common stock at $1.50 per share. The Series B Warrants will expire on

on May 15, 2008.

Warrants Activity for the Period and Summary of Outstanding Warrants

From June 16, 2004 to April 1, 2005 the Company sold 222,125 common stock units pursuant to a Private Placement Memorandum at $8.00 per unit to 49 individuals generating net proceeds of $1,777,000. The Company also issued 10,000 units of common stock for compensation. On August 14, 2006, 14,040 shares of preferred series C were converted into 1,755,000 shares of the company’s, common stock.

Each Unit consists of ten (10) shares of common stock. In addition, each unit entitles the holder to purchase a total of 10 shares of Probe Common Stock through the exercise of Warrants as follows: Class A Warrants, for 5 shares at a price of $1.00 per share which would expire on November 16, 2005, which has been extended to November 15, 2007; and, Class B Warrants, for 5 shares at a price of $1.50 per share which would expire on May 16, 2005, which were extended to May 15, 2008. As of December 31, 2006, no warrants were exercised.

A summary of warrant activity for the periods is as follows:

	No. of Warrants	Weighted Average exercise price	Warrants Exercisable	Weighted Average exercise price
Outstanding December 31, 2003	0	0.00	0	$0.00

Granted	321,250	$1.25	321,250
Exercised	0	$0.00	0

Outstanding December 31, 2004	321,250		321,250	$1.25

Granted	143,000	$1.25	143,000	$1.25
Exercised	0	$0.00	0

December 31, 2005	464,250	$1.25	464,250	$1.25

Granted	351,000	$1.25	351,000	$1.25
Exercised	0	0	0	0

December 31, 2006	815,250	$1.25	815,250	$1.25

	Warrants Outstanding		Warrants Exercisable

F-23

Range of Warrant Exercise Price

No. of Warrants

Weighted Average exercise price

Weighted Average Remaining Contractual Life

No. of Warrants

Weighted Average exercise price

$1.00

407,625

$1.00

.87

407,625

$1.00

$ 1.50

407,625

$1.50

1.38

407,625

$1.50

F-24

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 11 –RELATED PARTY TRANSACTIONS

The Company leased its 35,000 sq/ft facility for $19,700 per month from Kambiz Mahdi, Reza Zarif and Pacific Sail Bay Trust. Kambiz Mahdi was the former Chief Executive Officer and a Director of the company. Reza Zarif is the Chief Executive Officer and a Director of the company. Pacific Sail Bay Trust is managed by Frank Kavanaugh. Frank Kavanaugh is also the managing member of Ashford Capital, LLC, and the managing partner of Ashford Transition Fund, L.P. Furthermore, Mr. Kavanaugh was a director of the company from July 2004 to December 2004, however, he is no longer a member of the Board of Directors. Total payments made for the year ended December 31, 2006 were $59,100.

Jeffrey Conrad provides legal services for the company and receives a monthly retainer of $2,500 and is one of the company directors. Jeffrey Conrad is also a venture partner of eFund Capital Partners, LLC. Jeffrey Conrad does not have an equity stake in eFund Capital Partners, LLC. eFund Capital Partners, LLC received their shares pursuant to an investment agreement with us in April of 2004. Total payments through December 31, 2006 were $16,500.

South Coast Marketing, LLC is associated with eFund Capital Partners and administrates SB-2 filing fees. Total payments made for the For the year ended, December 31, 2006 were $5.000.

On May 25, 2006 the holders of Series B Convertible Preferred Stock exchanged their stock for Series C Convertible Preferred Stock. Pursuant to the exchange Reza Zarif, our CEO, received 4,500 shares of Series C; Kambiz Mahdi received 4,500 shares of Series C; and eFund Capital Partners, LLC received 5,040 shares. of Series C. Original as filed on May 25, 2006 each share of Series C Stock shall be converted into a number of shares of Common Stock that is equal to each share being divided by the average of the 3 lowest intraday bids in the twenty (20) days prior to conversion or $0.10, which ever is greater, multiplied by 100 (1 divided by x, multiplied by 100), or 125 shares per Series C, whichever is greater. However, on August 07, 2006 the terms of Series C were amended as follows: Each share of Series C Stock shall be converted into a number of shares of Common Stock that is equal to each share being divided $0.80 multiplied by 100 (1 divided by $0.80, multiplied by 100).

NOTE 12 – RELATED PARTY DEBT

On January 1, 2005, the Company entered into a credit line agreement with eFund Capital Partners, LLC for $150,000. This is an interest only line of credit. There are no scheduled principal payments due other than on March 22, 2007, when the entire outstanding balance plus any accrued and unpaid interest will be due and payable in full. Interest will accrue at the rate of 20% per annum payable as follows: (a) 12% will be paid on a monthly basis in US dollars based on the average outstanding balance of the previous month and (b) 8% will be paid in common stock of the company at the end of each quarter based on the average outstanding balance for the previous quarter. The interest due will be converted to our common stock at the price of $0.80 per share. This transaction is no less favorable than if the Company had entered into it on an arms length basis with an unrelated third part y because the Company was not aware of any other creditors willing to provide a loan for 20% or less interest. Total payments made during the twelve months ended December 31, 2006 consisted of $0 in principal and $7,395 in interest paid in cash and $2,958 in interest paid in common stock with accrued interest payable of $697 at December 31, 2006. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, at 12% interest rate, with a 36 month amortization, monthly payments of $4,982 and a balloon payment of $82,515 on April 15, 2008. Interest paid for June and July of 2006 was paid at the original rate. As of December 31, 2006, the outstanding balance was $139,449

F-25

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 12 – RELATED PARTY DEBT - Continued

On January 1, 2005 the Company entered into a credit line agreement with Rufina V. Paniego for $75,000. This is an interest only line of credit. There are no scheduled principal payments due other than on March 22, 2007, when the entire outstanding balance plus any accrued and unpaid interest will be due and payable in full. Interest will accrue at the rate of 20% per annum payable as follows: (a) 12% will be paid on a monthly basis in US dollars based on the average outstanding balance of the previous month and (b) 8% will be paid in common stock of the company at the end of each quarter based on the average outstanding balance for the previous quarter. The Interest due will be converted to our common stock at the price of $0.80 per share. This transaction is no less favorable than if the Company had entered into it on an arms length basis with an unrelated third party because th e Company was not aware of any other creditors willing to provide a loan for 20% or less interest. Rufina Paniego is the wife of Reza Zarif who is the Company’s founder, CEO and director. Total payments made during the year ended December 31, 2006 consisted of $0 in principal and $3,698 in interest paid in cash and $1,497 paid in common stock with accrued interest payable of $349 at December 31, 2006. This note was converted to a term note payable, with an effective date of December 31, 2006, Un-secured, At 12% interest rate, with a 36 month amortization, payments of $2,491.07 and a balloon payment of $41,257.78 on April 15, 2008. Interest paid for June and July of 2006 was paid at the original rate. As of December 31, 2006, the outstanding balance was $69,724.

Note Payable - dated March 10, 2006 – related party, unsecured, 12% interest, and ten monthly payments in the amount of $3,650 plus accrued interest. 1^st payment was due on April 10, 2006 payable to Kambiz Mahdi. The outstanding balance as of December 31, 2006 was $11,749. In 2006 the total principal paid was $24,751 and total interest paid was $2,400.

The outstanding balance as of December 31, 2006 was $11,749. In 2006 the total principal paid was $24,751 and total interest paid was $2,400.

Note Payable- dated March 10, 2006 – related party, special use, line of credit in the amount of $45,000, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock), due May 10, 2007. As of December 31, 2006 the outstanding balance was $28,034, payable to Kambiz Mahdi, This note was converted to a term note payable, with an effective date of December 31, 2006, unsecured, 12% interest rate, with a 36 month amortization, payments of $1,001 and a balloon payment of $16,588 on April 15, 2008 In 2006 the total principal paid was $1,615 and total interest paid was $2,487.

Note Payable - dated March 10, 2006 – related party, special use, line of credit in the amount of $45,000, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock), due May 10, 2007. As of December 31, 2006 the outstanding balance was $28,034, payable to Reza Zarif, This note was converted to a term note payable, with an effective date of December 31, 2006, unsecured, 12% interest rate, with a 36 month amortization, payments of $1,001 and a balloon payment of $16,588 on April 15, 2008. In 2006 the total principal paid was $1,615 and total interest paid was $2,487.

Note Payable – related party, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock) due on May 10, 2007, Payable to Kambiz Mahdi. This note was converted to a term note payable, with an effective date of December 31, 2006, unsecured, 12% interest rate, with a 36 month amortization, payments of $7,871 and a balloon payment of $130,366 on April 15, 2008. As of December 31, 2006 the outstanding balance was $220,316.

In 2006 the total principal paid was $12,689 and total interest paid was $17,289.

F-26

Note Payable- related party, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock) due on May 10, 2007, Payable to Reza Zarif. This note was converted to a term note payable, with an effective date of December 31, 2006, unsecured, At 12% interest rate, with a 36 month amortization, payments of $7,871 and a balloon payment of $130,366 on April 15, 2008. As of December 31, 2006 the outstanding balance was $220,316. In 2006 the total principal paid was $12,689 and total interest paid was $17,289.

F-27

PROBE MANUFACTURING, INC.

Notes to Financial Statements

for the year ended December 31, 2006

NOTE 13 – SUBSEQUENT EVENTS

On February 8, 2007, pursuant to the Company’s 2006 Incentive Option Plan which was adopted by the Company’s Board of Directors granted Company employees an incentive stock option to purchase up to 205,505 shares of common stock in the company. These options were granted at .52 cents, the fair market value of the company at the time of the grant.

On February 8, 2007, the company granted stock options to its key employees, to purchase up to 250,000 shares of the companies common stock, which was approved by the companies Board of Directors. These options were granted at .52 cents, the fair market value of the company at the time of the grant.

On February 5, 2007, the Company purchased a IET WS-450 Wave solder machine, giving the company the ability to increase its lead free production capacity, with a purchase price of $81,000. $25,000 of the purchase was funded by Rufina Paniego, the loan is secured by the equipment, with twelve monthly payments of $2,256, commencing April 5^th, with interest at the rate of 15% per annum.

NOTE 14 - Recent Accounting Pronouncements Issued, Not Adopted

In November 2004, the FASB issued SFAS No 151, Inventory Costs, an amendment of ARB No. 43, Chapter. This statement amends the guidance in ARB No. 43, Chapter 4, Inventory Pricing, to clarify the accounting for abnormal amounts of idle facility expense, freight, handling cost, and wasted material (spoilage). Paragraph 5 of ARB No. 43, Chapter 4, previously stated that “. Under some circumstances, items such as idle facility expense, excessive spoilage, double freight, and re-handling costs may be so abnormal as to require treatment as current period charges.” SFAS No. 151 requires that those items be recognized as current-period charges regardless of whether they meet the criterion of “so abnormal.” In addition, this statement requires that allocation of fixed production overheads to the costs of conversion be based on the prospectively and are effective for in ventory costs incurred during fiscal years beginning after June 15, 2005, with earlier application permitted for inventory costs incurred during fiscal years beginning after the date this Statement was issued. The adoption of SFGAS No. 151 is not expected to have a material impact on the Company’s financial position and results of operations.

In December 2004, the FASB issued SFAS No 123(R)(revised 2004), Share-Based Payment” which amends FASB Statement No. 123 and will be effective for public companies for interim or annual periods after June 15, 2005. The new standard will require entities to expense employee stock options and other share-based payments. The new standard may be adopted in one of three ways – the modified prospective transition method, a variation of the modified prospective transition method or the modified retrospective transition method. The Company is evaluation how it will adopt the standard and evaluating the effect that the adoption of SFAS 123(R) will have on our financial position and results of operations.

In December 2004, the FASB issued SFAS No.153, Exchanges of nonmonetary Assets, an amendment of APB Opinion No. 29. The guidance in APB Opinion No. 29, Accounting for Nonmonetary Transactions, is based on the principle that exchanges of nonmonetary assets should be measured based on the fair value of assets exchanged. The guidance in that Opinion, however, included certain exceptions to that principle. This Statement amends Opinion 29 to eliminate the exception for nonmonetary exchanges of similar productive assets that do not have commercial substance. A nonmonetary exchange has commercial substance if the future cash flows of the entity are expected to change significantly as a result of the exchange. SFAS No. 153 is effective for nonmonetary exchanges occurring in fiscal periods beginning after June 15, 2005. The adoption of SFAS No. 153 is not expected to have a ma terial impact on the Company’s financial position and results of operations.

F-28

PROBE MANUFACTURING, INC.

Notes to Financial Statements

Year ended December 31, 2005

NOTE 14 - Recent Accounting Pronouncements Issued, Not Adopted - continued

In March 2005, the FASB issued FASB Interpretation No. 47, “Accounting for Conditional Asset Retirement Obligations” (“FIN 47”). FIN 47 provides guidance relating to the identification of and financial reporting for legal obligations to perform an asset retirement activity. The Interpretation requires recognition of a liability for the fair value of a conditional asset retirement obligation when incurred if the liability’s fair value can be reasonably estimated. FIN 47 also defines when an entity would have sufficient information to reasonably estimate the fair value of an asset retirement obligation. The provision is effective no later than the end of fiscal years ending after December 15, 2005. The Company will adopt FIN 47 beginning the first quarter of fiscal year 2006 and does not believe the adoption will have a material impact on its consolidated financial position or results of operations or cash flows.

In May 2005, the FASB issued SFAS No. 154, "Accounting Changes and Error Corrections" ("SFAS 154") which replaces Accounting Principles Board Opinions No. 20 "Accounting Changes" and SFAS No. 3, "Reporting Accounting Changes in Interim Financial Statements-An Amendment of APB Opinion No. 28." SFAS 154 provides guidance on the accounting for and reporting of accounting changes and error corrections. It establishes retrospective application, or the latest practicable date, as the required method for reporting a change in accounting principle and the reporting of a correction of an error. SFAS 154 is effective for accounting changes and a correction of errors made in fiscal years beginning after December 15, 2005 and is required to be adopted by the Company in the first quarter of 2006. The Company is currently evaluating the effect that the adoption of SFAS 154 will have on its results of operations and financial condition but does not expect it to have a material impact.

F-29

PROBE MANUFACTURING, INC.

Notes to Financial Statements

Year ended December 31, 2005

NOTE 13 - Recent Accounting Pronouncements Issued, Not Adopted – Continued

In June 2005, the Emerging Issues Task Force, or EITF, reached a consensus on Issue 05-6, Determining the Amortization Period for Leasehold Improvements, which requires that leasehold improvements acquired in a business combination or purchased subsequent to the inception of a lease be amortized over the lesser of the useful life of the assets or a term that includes renewals that are reasonably assured at the date of the business combination or purchase. EITF 05-6 is effective for periods beginning after July 1, 2005. We do not expect the provisions of this consensus to have a material impact on the financial position, results of operations or cash flows.

In February 2006 the amendment to FASB Statement No 133, Accounting for Derivative Instruments and Hedging Activities, and No. 140, Accounting for Transfers and Servicing of Financial Assets and Extinguishment of Liabilities was issued as SFAS 155, Accounting for Certain Hybrid Financial Instruments.

This Statement permits fair value re-measurement for any hybrid financial instrument that contains an embedded derivative that otherwise would require bifurcation. Clarifies which interest-only strips and principal-only strips are not subject to the requirements of Statement 133, establishes a requirement to evaluate interest in securitized financial assets to identify interests that are freestanding derivatives or that are hybrid financial instruments that contain an embedded derivative requiring bifurcation. Clarifies that concentrations of credit risk in the form of subordination are not embedded derivatives and amends Statement 140 to eliminate the prohibition on a qualifying special-purpose entity from holding a derivative financial instrument that pertains to a beneficial interest other than another derivative financial instrument.

This Statement is effective for all financial instruments acquired or issued after the beginning of our first fiscal year that begins after September 15, 2006.

The fair value election provided for in paragraph 4(c) of this Statement may also be applied upon adoption of this Statement for hybrid financial instruments that had been bifurcated under paragraph 12 of Statement 133 prior to the adoption of this Statement. Earlier adoption is permitted as of the beginning of our fiscal year, provided we have not yet issued financial statements, including financial statements for any interim period, for that fiscal year. Provisions of this Statement may be applied to instruments that we hold at the date of adoption on an instrument-by-instrument basis. The Company is currently reviewing the effects of adoption of this Statement but it is not expected to have a material impact on our financial statements.

In March 2006 the amendment to FASB Statement No. 140, Accounting for Transfers and Servicing of Financial Assets and Extinguishment of Liabilities, with respect to the accounting for separately recognized servicing assets and servicing liabilities was issued as SFAS 156, Accounting for Servicing of Financial Assets.

This Statement requires an entity to recognize a servicing asset or servicing liability each time it undertakes an obligation to service a financial asset by entering into a servicing contract in certain situations, requires all separately recognized servicing assets and servicing liabilities to be initially measured at fair value, if practicable and permits and entity to choose either the amortization method or the fair value measurement method for each class of separately recognized servicing assets and servicing liabilities. At its initial adoption, permits a one-time reclassification of available-for-sale securities to trading securities by entities with recognized servicing rights, without calling into question the treatment of other available-for-sale securities under Statement 115, provided that the available-for-sale securities are identified in some manner as offsetting the entity 46;s exposure to changes in fair value of servicing assets or servicing liabilities that a servicer elects to subsequently measure at fair value. Requires separate presentation of servicing assets and servicing liabilities subsequently measured at fair value in the statement of financial position and additional disclosures for all separately recognized servicing assets and servicing liabilities. .Adoption of this

F-30

Statement is required as of the beginning of the first fiscal year that begins after September 15, 2006. The adoption of this statement is not expected to have a material impact on our financial statements.

F-31

ITEM 8. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

ITEM 8A. CONTROLS AND PROCEDURES.

As of the end of the period covered by this Annual Report on Form 10-KSB, an evaluation was performed under the supervision and with the participation of our management, including the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-14 and 15d-14 of the Securities Exchange Act

of 1934). Based on that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures are effective to ensure that information we are required to disclose in reports that we file or submit under the Securities Exchange Act of 1934 (i) is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms, and (ii) is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. Our disclosure controls and procedures are designed to provide reasonable assurance that such information is ac cumulated and communicated to our management. Our disclosure controls and procedures include components of our internal control over financial reporting. Management's assessment of the effectiveness of our internal control over financial reporting is expressed at the level of reasonable assurance that the control system, no matter how well designed and operated, can provide only reasonable, but not absolute, assurance that the control system's objectives will be met.

CHANGES IN INTERNAL CONTROLS

There was no change in our internal control over financial reporting that occurred during the fourth quarter covered by this Annual Report on Form 10-KSB that materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

ITEM 8B. OTHER INFORMATION.

None.

PART III

ITEM 9. DIRECTORS, EXECUTIVE OFFICERS, PROMOTERS AND CONTROL PERSONS; COMPLIANCE WITH SECTION 16(A) OF THE EXCHANGE ACT.

The following table sets forth the name, age, positions, and offices or employments for the past five years as of March 24, 2007, of our executive officers and directors. Members of the board are elected and serve for one year

NAME

AGE

POSITION

Kambiz Mahdi

Director

Reza Zarif

Chief Executive Officer, Director

Barrett Evans

Director

Jeffrey Conrad

Director

BIOGRAPHIES OF OFFICERS AND DIRECTORS

Page 28 of 40

Set forth below is a brief description of the background of our officers and directors based on information provided by them to us.

KAMBIZ MAHDI is a co-founder and a member of our board of directors.. Mr. Mahdi was the Technical Sales Manager for six years with Future Electronics, a billion dollar electronics distributor. While at Future Electronics, Mr. Mahdi developed technical management leadership and management tools for their highest technology customers and applications. Mr. Mahdi has a BS degree in Electrical Engineering.

REZA ZARIF is a co-founder, director and our chief executive officer since 2005. Mr. Zarif is responsible for all operational activities as well as developing and guiding the company's vision and cultural values. Prior to Probe, Mr. Zarif was at Graphtec Incorporated of Japan for 7 years where he was responsible for transferring manufacturing and associated technologies from Japan to the United States. Mr. Zarif has a BA and MA in Cultural Anthropology and earned the status of "Summa Cum Laude" at the University of California, Irvine.

BARRETT EVANS has been our director since July 15, 2004. Mr. Evans is eFund Capital Partner's Managing Partner. In 1990, Mr. Evans started his career with Cruttenden Roth, a regional emerging growth focused investment bank. At Cruttenden, Mr. Evans developed significant relationships with institutional investors. Additionally, Mr. Evans was engaged in all facets of investment banking from private debt and equity financing to Initial Public Offerings, retail brokerage and institutional trading, Mezzanine financing and bridge capital. Mr. Evans founded BRE Investments & Consulting, LLC. in 1996. BRE Investments & Consulting evolved into what is now eFund Capital Partners in 1999. At eFund Capital Partners, Mr. Evans has utilized his institutional contacts to help fund numerous start-up companies and has advised these companies on a wide range of issues including raising capital, securing man agement and overall business strategy. Mr. Evans received his Bachelor's degree from the University of California, Santa Barbara. He also serves as a director for NeWave, Inc. and Xtreme Companies, Inc.

JEFFREY CONRADhas been our director since July 15, 2004. Mr. Conrad is a Venture Partner with eFund Capital Partners, LLC. Jeff worked as a contract attorney for the law firm of Gibson, Dunn and Crutcher, LLP until December 1999 when he joined eFund Capital Partners. Prior to that time he worked with Diana Perez, Attorney at Law, Kushner-Locke International and Universal Pictures. Jeff's primary focus has been on entertainment and corporate transactions. Jeff has also worked as a junior publicist for the public relations firm Levine Communications where his focus was strategic advertising and marketing. Jeff received his Juris Doctorate from Loyola Law School and is a member of the State Bar of California. Jeff received his Bachelor's degree from the University of California, Los Angeles.

BOARD OF DIRECTORS

We currently have four members of our Board of Directors, who are elected to annual terms and until their successors are elected and qualified. Executive officers are appointed by the Board of Directors on an annual basis and serve until their successors have been duly elected and qualified. There are no family relationships among any of our directors, officers or key employees. On April 13, 2006, Mr. Dennis Benner our director and chairman of the board of directors resigned from the board of directors to pursue other interest.

AUDIT COMMITTEE

We do not have a separate Audit Committee. Our full Board of Directors performs the functions usually designated to an Audit Committee. Mr. Evans, a Director , qualifies as an "audit committee financial expert" as defined in Item 401(e)(2) of Regulation S-B.

CODE OF ETHICS

We have adopted a code of ethics that applies to our principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions. We have filed

Page 29 of 40

our Code of Ethics as a Report on Form 10-KSB for the year ended December 31, 2005 as Exhibit 14.1. Our Code of Ethics is available upon request at no charge to any shareholder.

ITEM 10. EXECUTIVE COMPENSATION.

The following table presents a summary of the compensation paid to our Chief Executive Officer and Chief Operating Officer. No other executive officer received compensation in excess of$100,000 during 2005.Except as listed below, there are no bonuses, other annual compensation, restricted stock awards or stock options/SARs or any other compensation paid to the executive officers.

Annual Compensation Long Term Compensation

--------------------------------------- ----------------------------------------------------------

Awards ; Payouts

------------------------------ -----------------------

Restricted

Other Stock Securities

Annual Awards Underlying ; LTIP All Other ;

Name and Principal Position Year (1) Salary ($)Bonus ($) Comp ($) ($) Options/SARs Payout ($) Comp. ($)

_______________________________________________________________________________________________________________

Kambiz Mahdi, 2003 $174,632.59 0 0 0 0 0 0

2004 $167,000.00 0 0 0 0 ; 0 0

Director 2005 $167,000.00 0 0 0 0 0 0

Reza Zarif, Chief 2003 $174.632.59 0 0 0 0 0 0

Executive Officer 2004 $167,000.00 0 0 0 0 0 0

2005 $167,000.00 0 0 0 0 ; 0 0

2006 $250,000.00* 0 0 0 0 &nbs p; 0 0

* The difference between Employee’s current salary of $167,000 and the proposed $250,000 can be paid in stock at the Company’s Board of Director’s option. The price of the shares pursuant to the stock grant shall be set at the closing market price of the Company’s common stock on the date of the grant. The stock grants will take place on the final day of each fiscal quarter.

In the fiscal year 2005 we did not have any of our executives or officers under employments contracts. However, Kambiz Mahdi, our former chief executive officer and Reza Zarif, our former chief operations officer, and current chief executive officer orally agreed to accept $167,000 per annum as compensation for his services for the ended December 31, 2005.

Page 30 of 40

On September 15, 2005 our board of directors replaced our chief executive officer, Kambiz Mahdi, with Reza Zarif, our former chief operations officer. In November of 2005, Mr. Mahdi decided to leave the Company to pursue other interests.

Effective June 7, 2006 the Company entered into a two year employment contract whereby the Company shall pay its Chief Executive Officer, Reza Zarif a monthly salary of $20,833, which is equivalent to $250,000 on an annualized basis. Mr. Zarif’s salary will be payable pursuant to the Company’s standard payroll practices, which currently consist of twenty-six (26) payroll periods per year. The difference between Mr. Zarif’s current salary of $167,000 and the proposed $250,000 can be paid in stock at the Company’s Board of Director’s option. The price of the shares pursuant to the stock grant shall be set at the closing market price of the Company’s common stock on the date of the grant. The stock grants will take place on the final day of each fiscal quarter.

On December 15, 2006, our controller, John Bennett was promoted to Chief Financial Officer which took effect January 1, 2007. His new employment package includes $110,000 base salary plus a 100,000 stock option package that vests over five years with one year fully vested upon execution.

DIRECTOR COMPENSATION

We currently have four members of our board of directors, who are elected to annual terms and until their successors are elected and qualified. Executive officers are appointed by the board of directors on an annual basis and serve until their successors have been duly elected and qualified. There are no family relationships among any of our directors, officers or key employees.

We currently reimburse directors for travel expenses associated with their work for the company and have agreed to establish a compensation plan to be submitted for approval by the shareholders at our annual meeting in 2006. Until a plan is established and approved by the shareholders, directors will not be compensated.

ITEM 11. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT ANDRELATED STOCKHOLDER MATTERS.

The following table sets forth certain information concerning the beneficial ownership of our outstanding classes of stock as of December 31, 2006, by each person known by us to (i) own beneficially more than 5% of each class, (ii) by each of our Directors and Executive Officers and (iii) by all Directors and Executive Officers as a group. Unless otherwise indicated below, to our knowledge, all persons listed below have sole voting and investment power with respect to their shares of common stock except to the extent that authority is shared by spouses under applicable law.

The number of shares of common stock issued and outstanding on December 31, 2006 was 10,162,608 shares. The calculation of percentage ownership for each listed beneficial owner is based upon the number of shares of common stock issued and outstanding on December 31, 2006, plus shares of common stock subject to options held by such person on December 31, 2006 and exercisable within 60 days

thereafter.

Name of Beneficial Owner	Number of Shares Beneficially Owned	Percentage of Ownership (1)
Reza Zarif (2)	2,519,495	17.7%
Kambiz Mahdi (3)	2,502,456	17.6%
Dennis Benner (4)	484,675	3.4%
Barrett Evans (5)	2,342,259	16.4%
Jeffrey Conrad (6)	100,000
eFund Capital Partners, LLC (7)	2,342,259	16.4%
Ashford Capital, LLC (8)	1,001,954	7.0%

Page 31 of 40

Global Capital Management, Inc. (9)	750,000	5.3%
Total	9,610,839	94.5%

Total of All officers and directors	7,367,890	72.5%

(1)

The percentage of ownership includes shares underlying other classes of securities held by the individuals, Series A and Series B Warrants which can be converted into common stock within 60 days of this offering.

(2)

Reza Zarif is our chief executive officer and a director of ours. Mr. Zarif has dispositive and voting power over his shares and claims beneficial ownership of them. He is all the rights pursuant to such ownership. Mr. Zarif acquired his shares as a founder of Probe.

(3)

Kambiz Mahdi is one of our founders and a director of ours. Mr. Mahdi has dispositive and voting power over his shares and claims beneficial ownership of them. He is all the rights pursuant to such ownership. Mr. Mahdi acquired his shares as a founder of Probe.

(4)

Dennis Benner was director of ours until April 13, 2006 and acquired shares in our private placement memorandum dated July 15, 2004 as restated and amended on November 16, 2004 through “The DW & JS Benner Family Trust.” Mr. Benner has dispositive and voting power over the shares in The DW & JS Benner Family Trust and claims beneficial ownership of them.

(5)

Please see number (7) below.

(6)

Jeffrey Conrad is a director of ours and also serves as corporate secretary and legal counsel. He acquired the shares through a stock award to our directors for compensation as a member of our board of directors. Mr. Conrad has been a director of ours since May 2004.

(7)

The managing member of eFund Capital Partners, LLC is Barrett Evans and. Mr. Evans has authority regarding the portfolio management decisions with respect to the shares of common stock owned by the selling security holder. Mr. Evans may be deemed to have dispositive and voting power over the shares of the common stock owned by the selling security holder. However, Mr. Evans does not have the right to receive dividends from or the proceeds from the sale of such common stock by the selling shareholder and they disclaim any beneficial ownership of such shares of common stock. eFund Capital Partners, LLC received their shares pursuant to an investment agreement with us in April of 2004. Mr. Evans has been directors of ours since May 2004. He acquired 100,000 shares through a stock award to our directors for compensation as a member of our board of directors. M r. Conrad has been a director of ours since May 2004.

(8)

The Managing Member of Ashford Capital, LLC is Frank Kavanaugh. Mr. Kavanaugh has authority regarding the portfolio management decisions with respect to the shares of common stock owned by the selling security holder. Mr. Kavanaugh may be deemed to have dispositive and voting power over the shares of the common stock owned by the selling security holder. However, Mr. Kavanaugh does not have the right to receive dividends from or the proceeds from the sale of such common stock by the selling shareholder and disclaims any beneficial ownership of such shares of common stock. Ashford Capital, LLC received these shares pursuant to an assignment agreement with eFund Capital Partners, LLC. Ashford Capital, LLC and eFund Capital Partners, LLC have no affiliation. Mr. Kavanaugh was a director of ours from May 2004 until December 2004.

(9)

Global Capital Management, Inc. is a Japanese private equity firm. The company’s president is Ikuo Ito. Mr. Ito has authority regarding the portfolio management decisions with respect to the

Page 32 of 40

shares of common stock owned by the selling security holder. Mr. Ito may be deemed to have dispositive and voting power over the shares of the common stock owned by the selling security holder. However, Mr. Ito does not have the right to receive dividends from or the proceeds from the sale of such common stock by the selling shareholder and disclaims any beneficial ownership of such shares of common stock. The company bought its shares through our private placement memorandum dated July 15, 2004. Mr. Ito also owns 25,000 shares of common stock personally which were also purchased through our private placement memorandum dated July 15, 2004

The number of shares of common stock issued and outstanding on December 31, 2006 was 10,162,608 shares.

ITEM 12. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS.

South Coast Marketing, LLC is associated with eFund Capital Partners and administrates SB-2 filing fees. Total payments made for the year ended, December 31, 2006 were $5,000.

On May 25, 2006, The Company issued 500,000 shares of common stock at .10 cents (Market value of shares on that date), for a total of $50,000, to compensate its directors for their service through a stock grant pursuant to Form S-8 in the following amounts:

Name

Common Stock issued

Kambiz Mahdi 100,000

Reza Zarif 100,000

Barrett Evans 100,000

Jeffrey Conrad

100,000

Dennis Benner

100,000

On May 25, 2006 the holders of Series B Convertible Preferred Stock exchanged their stock for Series C Convertible Preferred Stock. Pursuant to the exchange Reza Zarif, our CEO, received 4,500 shares of Series C; Kambiz Mahdi received 4,500 shares of Series C; and eFund Capital Partners, LLC received 5,040 shares of Series C. Original as filed on May 25, 2006 each share of Series C Stock shall be converted into a number of shares of Common Stock that is equal to each share being divided by the average of the 3 lowest intraday bids in the twenty (20) days prior to conversion or $0.10, which ever is greater, multiplied by 100 (1 divided by x, multiplied by 100), or 125 shares per Series C, whichever is greater. However, on August 07, 2006 the terms of Series C were amended as follows: Each share of Series C Stock shall be converted into a number of shares of Common Stock that is equal to each s hare being divided $0.80 multiplied by 100 (1 divided by $0.80, multiplied by 100).

Page 33 of 40

due and payable in full. Interest will accrue at the rate of 20% per annum payable as follows: (a) 12% will be paid on a monthly basis in US dollars based on the average outstanding balance of the previous month and (b) 8% will be paid in common stock of the company at the end of each quarter based on the average outstanding balance for the previous quarter. The interest due will be converted to our common stock at the price of $0.80 per share. This transaction is no less favorable than if the Company had entered into it on an arms length basis with an unrelated third party because the Company was not aware of any other creditors willing to provide a loan for 20% or less interest. Total payments made during the twelve months ended December 31, 2006 consisted of $0 in principal and $7,395 in interest paid in cash and $2,958 in interest paid in common stock with accrued interest payable of $697 at December 31, 2006. This note was converted to a term note payable, with an effective date of June 30, 2006, unsecured, at 12% interest rate, with a 36 month amortization, monthly payments of $4,982 and a balloon payment of $82,515 on April 15, 2008. Interest paid for June and July of 2006 was paid at the original rate. As of December 31, 2006, the outstanding balance was $139,449. On August 14, 2006, the holders of Preferred Series C elected to convert their shares into common stock. As a result 14, 040 shares of Preferred Series C were converted into 1,755,000 shares of common stock.

On January 1, 2005 the Company entered into a credit line agreement with Rufina V. Paniego for $75,000. This is an interest only line of credit. There are no scheduled principal payments due other than on March 22, 2007, when the entire outstanding balance plus any accrued and unpaid interest will be due and payable in full. Interest will accrue at the rate of 20% per annum payable as follows: (a) 12% will be paid on a monthly basis in US dollars based on the average outstanding balance of the previous month and (b) 8% will be paid in common stock of the company at the end of each quarter based on the average outstanding balance for the previous quarter. The Interest due will be converted to our common stock at the price of $0.80 per share. This transaction is no less favorable than if the Company had entered into it on an arms length basis with an unrelated third pa rty because the Company was not aware of any other creditors willing to provide a loan for 20% or less interest. Rufina Paniego is the wife of Reza Zarif who is the Company’s founder, COO and director. Total payments made during the year ended December 31, 2006 consisted of $0 in principal and $3,698 in interest paid in cash and $1,497 paid in common stock with accrued interest payable of $349 at December 31, 2006. This note was converted to a term note payable, with an effective date of December 31, 2006, Un-secured, At 12% interest rate, with a 36 month amortization, payments of $2,491.07 and a balloon payment of $41,257.78 on April 15, 2008. Interest paid for June and July of 2006 was paid at the original rate. As of December 31, 2006, the outstanding balance was $69,724.

The outstanding balance as of December 31, 2006 was $11,749. In 2006 the total principal paid was $24,751 and total interest paid was $2,400.

Note Payable - dated March 10, 2006 – related party, special use, line of credit in the amount of $45,000, unsecured, 20% interest (10% paid in Cash and 10% paid in Company stock), due May 10, 2007. As of December 31, 2006 the outstanding balance was $28,034, payable to Reza Zarif, This note was converted to a term note payable, with an effective date of December 31, 2006, unsecured, 12% interest rate, with a

Page 34 of 40

36 month amortization, payments of $1,001 and a balloon payment of $16,588 on April 15, 2008. In 2006 the total principal paid was $1,615 and total interest paid was $2,487.

In 2006 the total principal paid was $12,689 and total interest paid was $17,289.

ITEM 13. EXHIBITS.

EXHIBIT

NUMBER DESCRIPTION

-------------------

3.1 Articles of Incorporation (included as exhibit 3.1 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

3.2 Bylaws (included as exhibit 3.2 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

4.1 Certificate of Designation for Series A Convertible Preferred Stock, dated May 20, 2004 (included as exhibit 4.1 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

4.2 Certificate of Designation for Series B Convertible Preferred Stock dated December 31, 2004 (included as exhibit 4.2 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

4.3 Sample Series A Warrant Purchase Agreement (included as exhibit 4.3 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

4.4 Sample Series B Warrant Purchase Agreement (included as exhibit 4.4 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

4.5 Sample Amended Series A Warrant Purchase Agreement (included as exhibit 4.5 to the Form SB-2/A filed on November 25, 2005 and incorporated herein by reference).

4.6 Sample Amended Series B Warrant Purchase Agreement (included as exhibit 4.6 to the Form SB-2/A filed on November 25, 2005 and incorporated herein by reference).

4.7. Certificate of Designation of Series C Convertible Preferred Stock dated May 25, 2006 (included as exhibit 4.1 to the Form 8-K filed on June 14, 2006 and incorporated herein by reference).

4.8 Amended Certificate of Designation of Series C Convertible Preferred Stock dated May 25, 2006 (included as exhibit 4.1 to the Form 8-K filed on August 14, 2006 and incorporated herein by reference).

4.9 Sample Amended Series A Warrant Purchase Agreement (included as exhibit 10.1 to the Form 8-k filed on November 15, 2006 and incorporated herein by reference).

Page 35 of 40

4.10 Sample Amended Series B Warrant Purchase Agreement (included as exhibit 10.2 to the Form 8-k filed on November 15, 2006 and incorporated herein by reference).

10.1 Lease Agreement between Probe Manufacturing, Inc. (F.K.A. Probe Manufacturing Industries, Inc. and Reza Zarif and Kambiz Mahdi, dated May 2, 1997 (included as exhibit 10.1 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.2 Consulting Agreement between Probe Manufacturing Industries and Anthony Reed dated December 31, 2004 (included as exhibit 10.2 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.3 Legal retainer agreement between Probe Manufacturing, Inc. and Jeffrey Conrad dated (included as exhibit 10.3 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.4 Line of Credit agreement between Probe Manufacturing, Inc. and eFund Capital Partners, LLC dated January 1, 2005 (included as exhibit 10.4 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.5 Line of Credit agreement between Probe Manufacturing, Inc. and Ashford Capital, LLC dated January 1, 2005 (included as exhibit 10.5 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.6 Line of Credit agreement between Probe Manufacturing, Inc. and Benner Exemption Trust dated March 8, 2005 (included as exhibit 10.6 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.7 Line of Credit agreement between Probe Manufacturing, Inc. and Edward Lassiter dated March 22, 2005 (included as exhibit 10.7 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.8 Line of Credit agreement between Probe Manufacturing, Inc. and Rufina V. Paniego dated January 1, 2004 (included as exhibit 10.8 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.9 Promissory Note between Probe Manufacturing, Inc and Ashford Transitional Fund, L.P. dated September 20, 2004 (included as exhibit 10.9 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.10 Engagement Letter between Probe Manufacturing, Inc. and eFund Capital Partners, LLC dated May 20, 2004 (included as exhibit 10.10 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.11 Series A Convertible Preferred Stock Purchase Agreement with eFund Capital Partners, LLC dated May 20, 2004 (included as exhibit 10.11 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.12 Series A Convertible Preferred Stock Purchase Agreement with Reza Zarif dated May 20, 2004 (included as exhibit 10.12 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.13 Series A Convertible Preferred Stock Purchase Agreement with Kambiz Mahdi dated May 20, 2004. (included as exhibit 10.13 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

Page 36 of 40

10.14 Series B Convertible Preferred Stock Purchase Agreement with eFund Capital Partners, LLC dated December 31, 2004 (included as exhibit 10.14 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10. 15 Series B Convertible Preferred Stock Purchase Agreement with Reza Zarif dated December 31, 2004 (included as exhibit 10.15 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.16 Series B Convertible Preferred Stock Purchase Agreement with Kambiz Mahdi dated December 31, 2004 (included as exhibit 10.16 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.17 Agreement to Cancel and Return shares of common stock between Probe and eFund Capital Partners, LLC, Ashford Capital, LLC, Reza Zarif, Kambiz Mahdi, dated December 31, 2004 (included as exhibit 10.17 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.18 Promissory note with eFund Capital Partners, LLC dated October 12, 2004 (included as exhibit 10.18 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.19 Promissory note with Rufina V. Paniego dated July 1, 2004 (included as exhibit 10.19 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference).

10.20 Sample purchase order agreement with Celerity, Inc (included as exhibit 10.20 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

10.21 Sample purchase order agreement with Newport Corporation (included as exhibit 10.21 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

10.22 Sample purchase order agreement with Asymtek Corporation (included as exhibit 10.22 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

10.23 Sample purchase order agreement with Jetline Engineering Corporation (included as exhibit 10.23 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

10.24 Sample purchase order agreement with our supplier Future Active, Inc (included as exhibit 10.24 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

10.25 Sample purchase order agreement with our supplier Arrow Electronics, Inc. (included as exhibit 10.25 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference).

10.26 Lease Agreement between Probe Manufacturing, Inc. and Mitchell Fitch, LLC, dated November 15, 2005 filed herewith.

10.27 Employment Agreement with Reza Zarif, Chief Executive Officer of Probe Manufacturing, Inc. (included as exhibit 10.1 to Form 8-K filed on June 14, 2006 and incorporated herein by reference).

10.27 Series C Convertible Preferred Exchange Agreement with eFund Capital Partners, LLC (included as exhibit 10.2 to Form 8-K filed on June 14, 2006 and incorporated herein by reference).

10.28 Series C Convertible Preferred Exchange Agreement with Reza Zarif (included as exhibit 10.3 to Form 8-K filed on June 14, 2006 and incorporated herein by reference).

10.29 Series C Convertible Preferred Exchange Agreement with Kambiz Mahdi (included as exhibit 10.4 to Form 8-K filed on June 14, 2006 and incorporated herein by reference).

Page 37 of 40

10.30 Amended Series C Convertible Preferred Exchange Agreement with eFund Capital Partners, LLC (included as exhibit 10.1 to Form 8-K filed on August 14, 2006 and incorporated herein by reference).

10.31 Amended Series C Convertible Preferred Exchange Agreement with Reza Zarif (included as exhibit 10.2 to Form 8-K filed on August 14, 2006 and incorporated herein by reference).

10.32 Amended Series C Convertible Preferred Exchange Agreement with Kambiz Mahdi (included as exhibit 10.3 to Form 8-K filed on August 14, 2006 and incorporated herein by reference).

10.33 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Kambiz Mahdi dated August 10, 2006 (included as exhibit 10.1 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.34 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Reza Zarif dated August 10, 2006 (included as exhibit 10.2 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.35 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Frank Kavanaugh dated August 10, 2006 (included as exhibit 10.3 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.36 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Kambiz Mahdi dated August 10, 2006 (included as exhibit 10.4 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.37 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Reza Zarif dated August 10, 2006 (included as exhibit 10.5 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.38 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Rufina Paniego dated August 10, 2006 (included as exhibit 10.6 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.39 Amended Line of Credit agreement between Probe Manufacturing, Inc. and eFund Capital Partners, LLC dated August 10, 2006 (included as exhibit 10.7 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.40 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Benner Exemption Trust dated August 10, 2006 (included as exhibit 10.8 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.41 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Ed Lassiter dated August 10, 2006 (included as exhibit 10.9 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.42 Amended Line of Credit agreement between Probe Manufacturing, Inc. and William Duncan dated August 10, 2006 (included as exhibit 10.10 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.43 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Hoa Mai dated August 10, 2006 (included as exhibit 10.11 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.44 Amended Line of Credit agreement between Probe Manufacturing, Inc. and Ashford Transition Fund dated August 10, 2006 (included as exhibit 10.12 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

Page 38 of 40

10.45 Employee Profit Sharing Plan (included as exhibit 10.13 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

10.46 Probe Manufacturing 2006 Employee Incentive Stock Option Plan (included as exhibit 10.14 to the Form 8-K filed on August 23, 2006 and incorporated herein by reference).

14.1 Code of Ethics (filed herewith).

21.1 List of Subsidiaries (included as Exhibit 21.1 to the Form 10-KSB

filed herewith).

23.1 Consent of Jaspers + Hall, PC - Independent Auditors to the Form 10-K filed

March 25, 2007, and filed herewith.

31.1 Certification of the Chief Executive Officer pursuant to Section 302 of the

Sarbanes-Oxley Act of 2002.

31.2 Certification of the Chief Financial Officer pursuant to Section 302 of the

Sarbanes-Oxley Act of 2002.

32.1 Certification of Officers pursuant to 18 U.S.C. Section 1350, as adopted

pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.

AUDIT FEES

Jaspers + Hall, PC were our auditors for the fiscal year ended December 31, 2005 and December 31, 20056 and for the three quarters ended September 30, 2006.

For their review of our Quarterly Reports on Form 10-Q for the fiscal year 2006, Jaspers + Hall, PC billed us $9,000. We have contracted Jaspers + Hall, PC to complete the 2006 year end audit for $15,000.

AUDIT RELATED FEES

None.

TAX FEES

None.

ALL OTHER FEES

None.

THE BOARD OF DIRECTORS PRE-APPROVAL POLICY AND PROCEDURES

We do not have a separate Audit Committee. Our full Board of Directors performs the functions of an Audit Committee. During fiscal year 2006, the Board of Directors adopted policies and procedures for the pre-approval of audit and non-audit services for the purpose of maintaining the independence of our independent auditors. We may not engage our independent auditors to render any audit or non-audit service unless either the service is approved in advance by the Board of Directors or the engagement to render the service is entered into pursuant to the Board of Director's pre-approval policies and procedures. On an annual basis, the Board of Directors may pre-approve services that are expected to be provided to us by the independent auditors during the following 12 months. At the time such pre - -approval is granted,

Page 39 of 40

the Board of Directors must (1) identify the particular pre-approved services in a sufficient level of detail so that management will not be called upon to make judgment as to whether a proposed service fits within the pre-approved services and (2) establish a monetary limit with respect to each particular pre-approved service, which limit may not be exceeded without obtaining further pre-approval under the policy.

The Board has considered whether the provision of the services described above under the caption "All Other Fees" is compatible with maintaining the auditor's independence.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in the City of Costa Mesa, State of California on the 30th day of March 2007.

PROBE MANUFACTURING, INC.

______________________________

REGISTRANT

/s/ Reza Zarif

___________________

By: Reza Zarif

Director and Chief Executive Officer

/s/ John Bennett

___________________

By:

John Bennett

Chief Financial Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.

Signature

Title

Date

/s/ Reza Zarif

Chief Executive Officer and Director

March 3026, 2007

_______________________

Reza Zarif

/s/ John Bennett

Chief Financial Officer

March 30, 2007

_______________________

John Bennett

/s/ Barrett Evans

_______________________

Director

March 30, 2007

Barrett Evans

/s/ Kambiz Mahdi

Director

March 30, 2007

_______________________

Kambiz Mahdi

/s/ Jeffrey Conrad

Director

March 30, 2007

_______________________

Jeffrey Conrad

Page 40 of 40

Positive
Negative
Uncertain
Constraining
Legalese
Litigous
Readability	8th grade Avg

Clean Energy (CETY) 10-K2006 FY Annual report

Content analysis