Omnitek Engineering (OMTK) 10-Q 2017 Q2 Quarterly report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended:  June 30, 2017

Commission File Number     000-53955

OMNITEK ENGINEERING CORP.

 (Exact name of Registrant as specified in its charter)

California	330984450
(State or other jurisdiction of incorporation or organization)	(I.R.S. Employer Identification No.)

1333 Keystone Way, #101, Vista, California 92081

 (Address of principal executive offices, Zip Code)

(760) 591-0089

 (Registrant's telephone number, including area code)

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒   No ☐

Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Sec. 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   Yes ☒   No ☐

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See definitions of "large accelerated filer,"  "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer	☐	Accelerated filer	☐
Non-accelerated filer	☐	Smaller Reporting Company	☒
Emerging growth company	☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐   No ☒

As of August 11, 2017, the Registrant had 20,281,082 shares of its no par value Common Stock outstanding

.

TABLE OF CONTENTS
	Page
PART I - FINANCIAL INFORMATION
Item 1.       Financial Statements
Condensed Balance Sheets as of June 30, 2017 and December 31, 2016	4
Condensed Statements of Operations for the three and six months ended June 30, 2017 and June 30, 2016	5
Condensed Statements of Cash Flows for the six months ended June 30, 2017 and June 30, 2016	6
Notes to the Condensed Financial Statements	7
Item 2.       Management's Discussion and Analysis of the Financial Condition and Results of Operations	13
Item 3.       Quantitative and Qualitative Disclosures about Market Risk	17
Item 4.       Controls and Procedures	17
PART II - OTHER INFORMATION
Item 1.       Legal Proceedings	17
Item 1A.    Risk Factors	17
Item 2.       Unregistered Sales of Equity Securities and Use of Proceeds	17
Item 3.       Defaults Upon Senior Securities	18
Item 5.       Other Information	18
Item 6.       Exhibits	18

Page 2

PART I

FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS 

Page 3

OMNITEK ENGINEERING CORP.

Condensed Balance Sheets

	June 30,		December 31,
	2017		2016
	(unaudited)
ASSETS
CURRENT ASSETS
Cash	$	96,973	$	17,782
Accounts receivable, net		76,227		28,159
Accounts receivable - related parties		7,513		7,005
Inventory, net		1,876,470		1,869,900
Prepaid expense		-		5,324
Costs and estimated earnings in excess of billings		-		30,973
Deposits		35,744		21,716
Total Current Assets		2,092,927		1,980,859
FIXED ASSETS, net		19,391		31,839
OTHER ASSETS
Other noncurrent assets		14,280		14,280
Total Other Assets		14,280		14,280
TOTAL ASSETS	$	2,126,598	$	2,026,978
LIABILITIES AND STOCKHOLDERS' EQUITY
CURRENT LIABILITIES
Accounts payable and accrued expenses	$	345,697	$	325,255
Accrued management compensation		399,154		314,788
Accounts payable - related parties		56,702		18,373
Billings in excess of costs and estimated earnings		5,998		-
Customer deposits		243,496		87,114
Total Current Liabilities		1,051,047		745,530
Total Liabilities		1,051,047		745,530
STOCKHOLDERS' EQUITY
Common stock, 125,000,000 shares authorized no par value      20,281,082 shares issued and outstanding, respectively		8,411,411		8,411,411
Additional paid-in capital		11,815,574		11,620,841
Accumulated deficit		(19,151,434)		(18,750,804)
Total Stockholders' Equity		1,075,551		1,281,448
TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY	$	2,126,598	$	2,026,978

The accompanying notes are an integral part of these financial statements.

Page 4

OMNITEK ENGINEERING CORP.

Condensed Statements of Operations (unaudited)

	For the Three		For the Three		For the Six		For the Six
	Months Ended		Months Ended		Months Ended		Months Ended
	June 30		June 30		June 30		June 30
	2017		2016		2017		2016
REVENUES	$	242,021	$	247,177	$	531,445	$	576,223
REVENUES, related parties		4,293		5,139		6,523		15,676
Total revenues		246,314		252,316		537,968		591,899
COST OF GOODS SOLD		145,794		148,316		298,407		320,493
GROSS MARGIN		100,520		104,000		239,561		271,406
OPERATING EXPENSES
General and administrative		249,017		341,461		549,139		654,257
Research and development		33,805		46,897		73,689		94,303
Depreciation and amortization		6,224		6,976		12,448		14,463
Total Operating Expenses		289,046		395,334		635,276		763,023
LOSS FROM OPERATIONS		(188,526)		(291,334)		(395,715)		(491,617)
OTHER INCOME (EXPENSE)
Other income		-		1,144		-		5,374
Interest expense		(2,263)		(1,949)		(4,115)		(2,640)
Total Other Income (Expense)		(2,263)		(805)		(4,115)		2,734
LOSS BEFORE INCOME TAXES		(190,789)		(292,139)		(399,830)		(488,883)
INCOME TAX EXPENSE		800		800		800		800
NET LOSS	$	(191,589)	$	(292,939)	$	(400,630)	$	(489,683)
BASIC AND DILUTED LOSS PER SHARE	$	(0.01)	$	(0.01)	$	(0.02)	$	(0.02)
WEIGHTED AVERAGE NUMBER OF COMMON SHARES OUTSTANDING - BASIC AND DILUTED		20,281,082		20,030,533		20,281,082		20,005,807

The accompanying notes are an integral part of these financial statements.

Page 5

OMNITEK ENGINEERING CORP.

Condensed Statements of Cash Flows (unaudited)

	For the Six		For the Six
	Months Ended		Months Ended
	June 30,		June 30,
	2017		2016
OPERATING ACTIVITIES
Net loss	$	(400,630)	$	(489,683)
Adjustments to reconcile net loss to net cash used in operating activities:
Amortization and depreciation expense		12,448		14,463
Options and warrants		94,733		118,068
Changes in operating assets and liabilities:
Accounts receivable		(48,068)		(9,130)
Accounts receivable–related parties		(508)		4,200
Costs and estimated earnings in excess of billings		371		-
Deposits		(14,028)		600
Prepaid expense		5,324		726
Inventory		(6,570)		37,356
Accounts payable and accrued expenses		20,442		81,032
Customer deposits		156,382		(3,164)
Accounts payable-related parties		38,329		561
Billings in excess of costs and estimated earnings		36,600		-
Accrued management compensation		184,366		66,250
Net Cash Provided by (Used in) Operating Activities		79,191		(178,721)
INVESTING ACTIVITIES
Net Cash Provided by Investing Activities		-		-
FINANCING ACTIVITIES
Proceeds from stock sale		-		100,000
Net Cash Provided by Financing Activities		-		100,000
NET INCREASE (DECREASE) IN CASH		79,191		(78,721)
CASH AT BEGINNING OF YEAR		17,782		105,846
CASH AT END OF PERIOD	$	96,973	$	27,125
SUPPLEMENTAL DISCLOSURES OF CASH FLOWS
CASH PAID FOR:
Interest	$	3,780	$	2,640
Income taxes	$	800	$	800
NON CASH INVESTING AND FINANCING ACTIVITIES
Options issued for accrued salary	$	100,000	$	-

Page 6

OMNITEK ENGINEERING CORP.

Notes to Condensed Financial Statements

June 30, 2017

(unaudited)

NOTE 1 - CONDENSED FINANCIAL STATEMENTS

The accompanying financial statements have been prepared by the Company without audit. In the opinion of management, all adjustments (which include only normal recurring adjustments) necessary to present fairly the financial position, results of operations, and cash flows at June 30, 2017 and for all periods presented herein, have been made.

Certain information and footnote disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted.  It is suggested that these condensed financial statements be read in conjunction with the financial statements and notes thereto included in the Company's December 31, 2016 audited financial statements.  The results of operations for the periods ended June 30, 2017 and 2016 are not necessarily indicative of the operating results for the full years.

NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES

Use of Estimates

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Actual results could differ from those estimates.

Recent Accounting Pronouncements

The Company has evaluated recent accounting pronouncements and their adoption has not had or is not expected to have a material impact on the Company’s financial position, or statements.

Inventory

Inventory is stated at the lower of cost or market. The Company’s inventory consists of finished goods and raw material and is located in Vista, California, consisting of the following:

	June 30,		December 31,
Location : Vista, CA	2017		2016
Raw materials	$	997,817	$	965,821
Finished goods		1,201,724		1,247,230
Work in process		20,080		-
Allowance for obsolete inventory		(343,151)		(343,151)
Total	$	1,876,470	$	1,869,900

The Company has established an allowance for obsolete inventory.  Expense for obsolete inventory was $-0- and $-0-, for the periods ended June 30, 2017 and June 30, 2016, respectively.

Page 7

OMNITEK ENGINEERING CORP.

Notes to Condensed Financial Statements

June 30, 2017

(unaudited)

NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Property and Equipment

Property and equipment at June 30, 2017 and December 31, 2016 consisted of the following:

	June 30,		December 31,
	2017		2016
Production equipment	$	61,960	$	61,960
Computers/Office equipment		28,540		28,540
Tooling equipment		12,380		12,380
Leasehold Improvements		42,451		42,451
Less: accumulated depreciation		(125,940)		(113,492)
Total	$	19,391	$	31,839

Depreciation expense for the six month periods ended June 30, 2017 and June 30, 2016 was $12,448 and $14,183, respectively.

Basic and Diluted Loss per Share

The computation of basic earnings per share of common stock is based on the weighted average number of shares outstanding during the periods presented. The computation of fully diluted earnings per share includes common stock equivalents outstanding at the balance sheet date. The Company had -0- and -0- stock options and warrants that would have been included in the fully diluted earnings per share as of June 30, 2017 and December 31, 2016, respectively.    

Income Taxes

The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes ("Topic 740"), which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized.

Topic 740 provides guidance on the accounting for uncertainty in income taxes recognized in a company's financial statements. Topic 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based upon the technical merits of the position. If the more likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements.

The Company includes interest and penalties arising from the underpayment of income taxes in the statements of operations in the provision for income taxes. As of June 30, 2017 and December 31, 2016 the Company had no accrued interest or penalties related to uncertain tax positions. The Company files an income tax return in the U.S. federal jurisdiction and the state of California. With few exceptions, the Company is no longer subject to U.S. federal, state, and local, or non-U.S. income tax examinations by tax authorities for years before 2008.

Page 8

OMNITEK ENGINEERING CORP.

Notes to Condensed Financial Statements

June 30, 2017

(unaudited)

NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

Going Concern

Historically, the Company has incurred net losses and negative cash flows from operations. These factors, among others, raise substantial doubt about the Company’s ability to continue as a going concern. The Company may raise additional operating capital through the sale of debt or equity securities. Management believes that with sufficient working capital, from financing activities or from sales of the Company’s products, the Company will be able to meet its obligations and continue as a going concern. However, there is no assurance that the Company will be successful in its plan.

NOTE 3 – COSTS AND ESTIMATED EARNINGS AND BILLINGS ON UNCOMPLETED CONTRACTS

Billing practices for our contracts are governed by the contract terms of each project based on progress toward completion approved by the owner, achievement of milestones or pre-agreed schedules. Billings do not necessarily correlate with revenue recognized under the percentage-of-completion method of accounting. The current liability, “Billings in excess of costs and estimated earnings,” represents billings in excess of revenues recognized. The current asset, “Costs and estimated earnings in excess of billings,” represents revenues recognized in excess of amounts billed to the customer, which are usually billed during normal billing processes following achievement of contractural requirements.  

The two tables below set forth thet costs incurred and earnings accrued on uncompleted contracts compared with the billings on those contracts through June 30, 2017 and December 31, 2016 and reconcile the net excess billings to the amounts included in the balance sheets at those dates.

	June 30,			December 31,
	2017			2016
Cost incurred on uncompleted contracts		$	102,048		$	100,335
Estimated earnings			50,054			52,138
			152,102			152,473
Billings on uncompleted contracts			(158,100)			(121,500)
Costs incurred and estimated earnings over (under) billings on uncompleted contracts			(5,998)			30,973

Included in the accompanying balance sheets under the following captions:

	June 30,			December 31,
	2017			2016
Costs and estimated earnings in excess of billings on uncompleted contracts		$	-		$	30,973
Billings in excess of costs and estimated earnings on uncompleted contracts			(5,998)			-
Net amount of costs and estimated earnings on uncompleted contracts above (below) billings		$	(5,998)		$	30,973

NOTE 4 - RELATED PARTY TRANSACTIONS

Accounts Receivable – Related Parties

The Company holds a non-controlling interest in various distributors in exchange for use of the Company’s name and logo. As of June 30, 2017, the Company owned a 15% interest in Omnitek Engineering Thailand Co. Ltd. and a

Page 9

OMNITEK ENGINEERING CORP.

Notes to Condensed Financial Statements

June 30, 2017

(unaudited)

NOTE 4 - RELATED PARTY TRANSACTIONS (CONTINUED)

20% interest in Omnitek Peru S.A.C.  As of June 30, 2017 and December 31, 2016, the Company was owed $7,513 and $7,005, respectively, by related parties for the purchase of products and services.

Accounts Payable – Related Parties

The Company regularly incurs expenses that are paid to related parties and purchases goods and services from related parties. As of June 30, 2017 and December 31, 2016, the Company owed related parties for such expenses, goods and services in the amounts of $56,702 and $18,373, respectively.

Accrued Management Expenses

For the periods ended June 30, 2017 and December 31, 2016, the Company’s president, chief financial officer and vice president were due amounts for services performed for the Company.  

As of June 30, 2017 and December 31, 2016 the accrued management fees consisted of the following:

	June 30,			December 31,
	2017			2016
Amounts due to the president		$	250,257		$	210,257
Amounts due to the chief financial officer			72,203			35,962
Amounts due to the vice president			76,694			68,569
Total		$	399,154		$	314,788

NOTE 5 -  STOCK OPTIONS AND WARRANTS

During the six months ended June 30, 2017 and 2016, the Company granted 350,000 and 250,000 options for services, respectively. During the six months ended June 30, 2017 and 2016, the Company recognized expense of $94,733 and $118,068, respectively, for options and warrants that vested during the periods pursuant to ASC Topic 718. Total remaining amount of compensation expense to be recognized in future periods is $59,640. During the six months ended June 30, 2017 and 2016, the Company granted 555,556 and 470,000 options to the CEO for accrued compensation, respectively. 

In April 2007, the Company’s shareholders approved its 2006 Long-Term Incentive Plan (“the 2006 Plan”).   Under the 2006 plan, the Company may issue up to 10,000,000 shares of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion.  As of December 31, 2014 the remaining 2,590,000 options previously issued under the plan expired. On August 3, 2011 the Board of Directors adopted the Omnitek Engineering Corp. 2011 Long-term Incentive Plan (the “2011 Plan”), under which 1,000,000 shares of Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and and Non-Qualified Stock Options to employees and consultants at its discretion. As of June 30, 2017 the Company has a total of 815,000 options issued under the plan. On September 11, 2015 the Board of Directors adopted the Omnitek Engineering Corp. 2015 Long Term Incentive Plan (the “2015 Plan”), under which 2,500,000 shares of the Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of June 30, 2017 the Company has a total of 1,875,556 options issued under the plan. During the six months ended June 30, 2017 and 2016 the Company issued -0- and -0- warrants, respectively.  

The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value.  The Company estimates the fair value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock. When determining expected volatility, the Company considers the historical performance of the Company’s stock, as well as implied volatility. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant, based on the options’ expected term. The expected term of the

Page 10

OMNITEK ENGINEERING CORP.

Notes to Condensed Financial Statements

June 30, 2017

(unaudited)

NOTE 5 -  STOCK OPTIONS AND WARRANTS (CONTINUED)

options is based on the Company’s evaluation of option holders’ exercise patterns and represents the period of time that options are expected to remain unexercised. The Company uses historical data to estimate the timing and amount of forfeitures.

The following table presents the assumptions used to estimate the fair values of the stock options granted:

	June 30, 2017	June 30, 2016
Expected volatility	105%	87%
Expected dividends	0%	0%
Expected term	7 Years	7 Years
Risk-free interest rate	2.22%	1.52%

A summary of the status of the options and warrants granted at June 30, 2017 and December 31, 2016 and changes during the periods then ended is presented below:  

	June 30,			December 31,
	2017			2016
			Weighted-Average			Weighted-Average
	Shares		Exercise Price	Shares		Exercise Price
Outstanding at beginning of year	4,510,313	$	2.81	3,890,313	$	3.28
Granted	905,556		0.18	720,000		0.28
Exercised	-		-	-		-
Expired or cancelled	(2,725,313)		3.88	(100,000)		2.74
Outstanding at end of period	2,690,556		0.85	4,510,313		2.81
Exercisable	2,430,556	$	0.85	4,222,813	$	2.93

A summary of the status of the options and warrants outstanding at June 30, 2017 is presented below:

Range of Exercise Prices	Number Outstanding	Weighted-Average Remaining Contractual Life	Number Exercisable	Weighted-Average Exercise Price
$0.01-0.99	1,950,556	5.93 years	1,717,223	0.26
$1.00-1.99	215,000	1.63 years	215,000	1.41
$2.00-2.99	525,000	2.27 years	498,333	2.52
$0.01-2.99	2,690,556	4.87 years	2,430,556	$0.85

Page 11

OMNITEK ENGINEERING CORP.

Notes to Condensed Financial Statements

June 30, 2017

(unaudited)

NOTE 6 -  SUBSEQUENT EVENTS

In accordance with ASC 855, the Company’s management has evaluated the subsequent events through the date the financial statements were issued and has found no subsequent events to report.

Page 12

ITEM 2  MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS 

The following discussion of our financial condition and results of operations should be read in conjunction with the financial statements and related notes to the financial statements included elsewhere in this periodic report.  Some of the statements under “Management’s Discussion and Analysis,” “Description of Business” and elsewhere herein may include forward-looking statements which reflect our current views with respect to future events and financial performance. These statements include forward-looking statements both with respect to us specifically and the alternative fuels engines industry in general. Statements which include the words “expect,” “intend,” “plan,” “believe,” “project,” “anticipate,” “will,” and similar statements of a future or forward-looking nature identify forward-looking statements for purposes of the federal securities laws or otherwise. The safe harbor provisions of the federal securities laws do not apply to any forward-looking statements contained in this registration statement. 

All forward-looking statements address such matters that involve risks and uncertainties. Accordingly, there are or will be important factors that could cause our actual results to differ materially from those indicated in these statements. We undertake no obligation to publicly update or review any forward-looking statements, whether as a result of new information, future developments or otherwise.

If one or more of these or other risks or uncertainties materialize, or if our underlying assumptions prove to be incorrect, actual results may vary materially from what we projected. Any forward-looking statements you read herein reflect our current views with respect to future events and are subject to these and other risks, uncertainties and assumptions relating to our written and oral forward-looking statements attributable to us or individuals acting on our behalf and such statements are expressly qualified in their entirety by this paragraph.

Results of Operations

For the three months ended June 30, 2017 and 2016

Revenues were $246,314 for the three months ended June 30, 2017 compared with $252,316 for the three months ended June 30, 2016, a decrease of $6,002.

Cost of sales was $145,794 for the three months ended June 30, 2017 compared with $148,316 for the three months ended June 30, 2016, a decrease of $2,522. Our gross margin percentage was 41% for the three months ended June 30, 2017 and 41% for the same period in 2016.

Operating expenses for the three months ended June 30, 2017 were $289,046 compared with $395,334 in the same period in 2016, a decrease of $106,288 or 27%. General and administrative expense for the three months ended June 30, 2017 was $249,017 compared with $341,461 for the three months ended June 30, 2016.  Major components of general and administrative expenses for the three months ended June 30, 2017 were professional fees of $10,270, rent expense of $24,830, and salary and wages of $101,183. This compares to professional fees of $20,593, rent expense of $20,317 and salaries and wages of $122,076 for the three months ended June 30, 2016.  For the three months ended June 30, 2017 research and development outlays were decreased to $33,805 compared with $46,897 for the three months ended June 30, 2016.

Our net loss for the three months ended June 30, 2017 was $191,589, or ($0.01) per share, compared with a net loss of $292,939, or ($0.01) per share, for the three months ended June 30, 2016.  The decreased net loss was primarily due to reduced general and administrative expenses during the three months ended June 30, 2017 over the same period a year earlier.

Results for the three months ended June 30, 2017 reflect the impact of non-cash expenses, including the value of options and warrants granted in the amount of $25,200 and depreciation and amortization of $6,224.  For the three month period a year earlier non-cash expenses included options and warrants granted in the amount of $81,969 and depreciation and amortization of $6,976.

Page 13

For the six months ended June 30, 2017 and 2016

Revenues decreased to $537,968 for the six months ended June 30, 2017 from $591,899 for the six months ended June 30, 2016, a decrease of $53,931 or 9%. The decrease is attributable to the timing of product shipments.

Our cost of sales decreased to $298,407 for the six months ended June 30, 2017 from $320,493 for the six months ended June 30, 2016, a decrease of $22,086. Our gross margin was 45% for the six months ended June 30, 2017 compared to 46% in 2016.

Our operating expenses for the six months ended June 30, 2017 were $635,276 compared to $763,023 in 2016, a decrease of $127,747 or 17%.  General and administrative expense for the six months ended June 30, 2017 was $549,139 as compared to $654,257 for the six months ended June 30, 2016. Major components of general and administrative expenses for the six months ended June 30, 2017 were professional fees of $30,899, rent expense of $57,792 and salary and wages of $204,169. This compares to professional fees of $51,978, rent expense of $48,053, and salary and wages of $241,362 for the six months ended June 30, 2016. Research and development outlays were decreased to $73,689 for the six months ended June 30, 2017 compared to $94,303 for the six months ended June 30, 2016.

Our net loss for the six months ended June 30, 2017 was $400,630, or $0.02 per share, compared to a net loss of $489,683, or $0.02 per share, for the six months ended June 30, 2016. The decreased loss was the result of reductions in both general and administrative expenses and research and development expenses.

Results for the six months ended June 30, 2017 reflect the impact of non-cash expenses, including the value of options and warrants granted in the amount of $94,733 and depreciation and amortization of $12,448. For the six-month period a year earlier, non-cash expenses for the value of options and warrants granted were $118,068 and depreciation and amortization of $14,463.

Liquidity and Capital Resources

Overview

Our primary sources of liquidity are cash provided by operating activities and available working capital. Additionally, from time to time we may raise funds from the equity capital markets to fund our research and development programs, expansion of our business and general operations.

At June 30, 2017, our current liabilities totaled $1,051,047 and our current assets totaled $2,092,927, resulting in positive working capital of $1,041,880 and a current ratio of 1.99.  

We have no firm commitments or obligations for capital expenditures.  However, substantial discretionary expenditures may be required to enable us to conduct existing and planned product research, design, development, manufacturing, marketing and distribution of our products. We may need to raise additional capital to facilitate growth and support our long-term product development, manufacturing, and marketing programs. The Company has no established bank-financing arrangements. Therefore, it is possible that we need to seek additional financing through subsequent future public or private sales of our securities, including equity securities. We may also seek funding for the development, manufacturing, and marketing of our products through strategic partnerships and other arrangements with corporate partners. There can be no assurance, however, that such collaborative arrangements or additional funds will be available when needed, or on terms acceptable to us, if at all. If adequate funds are not available, we may be required to curtail one or more of our research and development programs.

We have historically incurred significant losses, which have resulted in a total accumulated deficit of $19,151,434 at June 30, 2017, of which $5,604,135 is a direct result of derivative expense and change in fair value of derivative liability and is unrelated to our operations or cash flow.

Page 14

Operating Activities

We realized a positive cash flow from operations of $79,191 for the six months ended June 30, 2017 compared with a negative cash flow of $178,721 during the six months ended June 30, 2016.  

Included in the net loss of $400,630 for the six months ended June 30, 2017 are non-cash expenses, which are not a drain on our capital resources.  During the period, these non-cash expenses include the value of options and warrants granted in the amount of $94,733 and depreciation and amortization of $12,448.  Excluding these non-cash amounts, our adjusted EBITDA for the six months ended June 30, 2017 would be a loss of $293,449.

Off-Balance Sheet Arrangements

None.

Critical Accounting Policies and Estimates

Accounting Method and Use of Estimates

The Company's financial statements are prepared using the accrual method of accounting. The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Areas where significant estimates are required include the following:

Accounts Receivable

Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts.

Inventory

Inventory is stated at the lower of cost or market. The Company’s inventory consists of finished goods and raw materials. The Company identifies items in its inventory that have not been sold in a timely manner. Accordingly, the Company has established an allowance for the cost of such obsolete inventory.

Long-lived assets

The Company assesses the recoverability of its long lived assets annually and whenever circumstances would indicate that there may be an impairment. The Company compares the estimated undiscounted future cash flows to the carrying value of the long lived assets to determine if an impairment has occurred. In the event that an impairment has occurred, the Company recognizes the impairment immediately.

Costs and Estimated Earnings and Billings on Completed Contracts

Billing practices for our contracts are governed by the contract terms of each project based on progress toward completion approved by the owner, achievement of milestones or pre-agreed schedules. Billings do not necessarily correlate with revenue recognized under the percentage-of-completion method of accounting. The current liability, “Billings in excess of costs and estimated earnings on uncompleted contracts,” represents billings in excess of revenues recognized. The current asset, “Costs and estimated earnings in excess of billings on uncompleted contracts,” represents revenues recognized in excess of amounts billed to the customer, which are usually billed during normal billing processes following achievement of contractual requirements.

Page 15

Income Taxes

The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized. The Company uses historical experience to determine the likelihood of realization of deferred tax liabilities and assets.

Revenue Recognition

Products - The Company recognizes revenue from the sale of new engines for use with compressed natural gas, engine components to convert existing engines to compressed natural gas use and components for the maintenance of natural gas engines.  Revenues are recognized when all of the following have occurred: (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred or services have been rendered, (iii) the price is fixed or determinable and (iv) the ability to collect is reasonably assured. These criteria are generally satisfied at the time of shipment when risk of loss and title passes to the customer.

Contracts – Revenues are recognized on the percentage-of-completion method, measured by either achievement of milestones or the ratio of costs incurred up to a given date to estimated total costs for each contract. Contract costs include all direct material, labor, subcontract and other costs. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Our contracts generally take 12 to 24 months to complete. Based on our historical experience, we generally consider the collection risk related to these amounts to be low. When events or conditions indicate that the amounts outstanding may become uncollectible, an allowance is estimated and recorded. The current asset, “Costs and estimated earnings in excess of billings,” represents revenues recognized in excess of amounts billed to the customer, which are usually billed during normal billing processes following achievement of contractual requirements.   

Accounting for Income Taxes

The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes ("Topic 740"), which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized.

Topic 740 provides guidance on the accounting for uncertainty in income taxes recognized in a company's financial statements. Topic 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based upon the technical merits of the position. If the more likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements.

The Company includes interest and penalties arising from the underpayment of income taxes in the statements of operations in the provision for income taxes. As of June 30, 2017, the Company had no accrued interest or penalties related to uncertain tax positions.

The Company files an income tax return in the U.S. federal jurisdiction and the state of California. With few exceptions, the Company is no longer subject to U.S. federal, state, and local, or non-U.S. income tax examinations by tax authorities for years before 2008.

At June 30, 2017, the Company had net operating loss carry forwards of approximately $5,772,304 through 2034. No tax benefit has been reported in the June 30, 2017 financial statements since the potential tax benefit is offset by a valuation allowance of the same amount.

Page 16

Due to the change in ownership provisions of the Tax Reform Act of 1986, net operating loss carry forwards for Federal income tax reporting purposes are subject to annual limitations. Should a change in ownership occur, net operating loss carry forwards may be limited as to use in future years.

Recently Issued Accounting Pronouncements

The Company has evaluated recent accounting pronouncements and their adoption has not had or is not expected to have a material impact on the Company’s financial position, or statements.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

ITEM 4. CONTROLS AND PROCEDURES 

Evaluation of Disclosure Controls and Procedures

Disclosure controls and procedures are controls and procedures that are designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC's rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by our company in the reports that it files or submits under the Exchange Act is accumulated and communicated to our management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure.

Our management carried out an evaluation under the supervision and with the participation of our Principal Executive Officer and Principal Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures pursuant to Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 ("Exchange Act"). Based upon that evaluation, our Principal Executive Officer and Principal Financial Officer have concluded that our disclosure controls and procedures were not effective as of June 30, 2017.

Changes in Internal Controls

  There have not been any changes in the Company's internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended June 30, 2017 that have materially affected, or are reasonably likely to materially affect, the Company's internal control over financial reporting.

PART II - OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS 

We are not a party to any pending legal proceeding.  No federal, state or local governmental agency is presently contemplating any proceeding against the Company.  No director, executive officer or affiliate of the Company or owner of record or beneficially of more than five percent of the Company's common stock is a party adverse to the Company or has a material interest adverse to the Company in any proceeding.

ITEM 1A.       RISK FACTORS 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

ITEM 2. UNREGISTERED SALE OF EQUITY SECURITIES AND USE OF PROCEEDS 

There were no unregistered sales of equity securities during the period covered by this report.

Page 17

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None

ITEM 5. OTHER INFORMATION

None

ITEM 6. EXHIBITS

(a)Documents filed as part of this Report. 

1. Financial Statements.  The condensed unaudited Balance Sheet of Omnitek Engineering Corp. as of June 30, 2017 and the audited balance sheet as of December 31, 2016, the condensed unaudited Statements of Operations for the three month periods ended June 30, 2017 and 2016, and the condensed unaudited Statements of Cash Flows for the three month periods ended June 30, 2017 and 2016, together with the notes thereto, are included in this Quarterly Report on Form 10-Q. 

3. Exhibits. The following exhibits are either filed as a part hereof or are incorporated by reference. Exhibit numbers correspond to the numbering system in Item 601 of Regulation S-K. 

Exhibit
Number	Description of Exhibit
3.1	Amended and Restated Articles of Incorporation(1)
3.2	Amended and Restated By-Laws Adopted July 12, 2012 (2)
31.01	CEO certification pursuant to Section 302 of the Sarbanes – Oxley Act of 2002 (3)
31.02	CFO certification pursuant to Section 302 of the Sarbanes – Oxley Act of 2002 (3)
32.01	CEO and CFO certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (3)
101	The following materials from the Company's Quarterly Report on Form 10-Q for the quarter ended June 30, 2017 formatted in Extensible Business Reporting Language ("XBRL"): (i) the balance sheets (unaudited); (ii) the statements of operations (unaudited); (iii) the statements of cash flows (unaudited); and, (iv) related notes.

(1)Previously filed on Form on Form 10 on April 27, 2010 

(2)Previously filed on Form 8-K on August 2, 2012 

(3)Filed herewith 

Page 18

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

	Omnitek Engineering Corp.
Dated: August 11, 2017
		By: Werner Funk
		Its: Chief Executive Officer Principal Executive Officer
Dated: August 11, 2017			/s/ Richard L. Miller
			By: Richard L. Miller
			Its: Chief Financial Officer Principal Financial Officer

Page 19