Exhibit 1.01
Bel Fuse Inc.
Conflict Minerals Report
For the reporting period from January 1, 2015 to December 31, 2015
This Conflict Minerals Report (the "Report") of Bel Fuse Inc. (referred to in this Report as the "Company," "Bel," "we," "us," or "our") for the reporting period from January 1, 2015 to December 31, 2015 (the "Reporting Period") has been prepared pursuant to Rule 13p-1 and Form SD (the "Rule") promulgated under the Securities Exchange Act of 1934, as amended (the "Exchange Act"). The Rule was adopted by the Securities and Exchange Commission ("SEC") to implement reporting and disclosure requirements related to minerals specified in the Rule as directed by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (the "Dodd-Frank Act"). The Rule imposes certain reporting obligations on registrants who file reports with the SEC under Sections 13(a) or 15(d) of the Exchange Act whose manufactured products contain minerals specified in the Rule that are necessary to the functionality or production of their products. The specified minerals, which are collectively referred to in this Report as the "Conflict Minerals," are defined as cassiterite, columbite-tantalite, gold, wolframite, and their derivatives, which are limited to tin, tantalum and tungsten unless the Secretary of State determines that additional derivatives are financing conflict in one of the covered countries described below. These requirements apply to registrants regardless of the geographic origin of the Conflict Minerals and whether or not they fund armed conflict.
If a registrant can establish that the Conflict Minerals originated from sources other than the Democratic Republic of the Congo ("DRC") or an adjoining country, specifically, Angola, Burundi, Central African Republic, the Republic of Congo, Rwanda, South Sudan, Tanzania, Uganda and Zambia (collectively, together with the DRC, the "Covered Countries"), or from recycled and scrap sources, they must submit a Form SD which describes the reasonable country of origin inquiry completed.
If a registrant has reason to believe that any of the Conflict Minerals in their supply chain may have originated in the Covered Countries, or if they are unable to determine the country of origin of those Conflict Minerals, then the registrant must exercise due diligence on the Conflict Minerals' source and chain of custody.
1. | Company Overview |
1.1 Description of the Products Covered by this Report
This Report has been prepared by the management of Bel. The content of this Report includes the activities of all majority-owned subsidiaries that are required to be consolidated in our financial statements, including the Emerson Network Power Connectivity Solutions ("Connectivity Solutions") business that we acquired from Emerson Electric Co. on July 25, 2014 (the China portion of this acquisition closed on August 29, 2014) and the Power Solutions business of Power-One ("Power Solutions") that we acquired from ABB Ltd. on June 19, 2014.
Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. These products are primarily used in the networking, telecommunications, computing, military, aerospace, transportation and broadcasting industries. Bel's portfolio of products also finds application in the automotive, medical and consumer electronics markets.
Bel's principal executive offices are located at 206 Van Vorst Street, Jersey City, New Jersey 07302. The Company operates other facilities in North America, Europe and Asia. At December 31, 2015, the Company had 7,971 full-time associates. At December 31, 2015, the Company employed 1,487 people at its North American facilities, 5,624 people at its Asian facilities and 860 people at its European facilities, excluding approximately 1,455 workers supplied by independent contractors.
1.2 Products Overview
The following is a description of the Company's product groups as of December 31, 2015:
Magnetic Solutions
Bel's magnetic solutions product group offers industry leading products. The Company's integrated connector module ("ICM") products integrate RJ45 connectors with discrete magnetic components to provide a more robust part that allows customers to substantially reduce board space and inventory requirements. The Company's 2013 acquisition of the TE Connectivity ("TE") wire wound business, which is now doing business as TRP Connector ("TRP"), broadens the ICM product line and provides access to strategically important customer programs. Power Transformers include standard and custom designs for use in industrial instrumentation, alarm and security systems, motion control, elevators, and medical products. All Power Transformers are designed to comply with international safety standards governing transformers. Bel's SMD Power Inductors include a selection of over 3,000 parts utilized in power supplies, DC-DC converters, LED lighting and other electronic applications. Discrete Components are magnetic devices that condition, filter and isolate the signal as it travels through network equipment, ensuring accurate data/voice/video transmission.
1
Product Line | Function | Applications | Brands Sold Under | |
Magnetic Solutions | Integrated Connector Modules (ICMs) | Condition, filter, and isolate the electronic signal to ensure accurate data/voice/video transmission and provide RJ45 and USB connectivity. | Network switches, routers, hubs, and PCs used in 10/100/1000 Gigabit Ethernet, Power over Ethernet (PoE), PoE Plus and home networking applications. | Bel, TRP, MagJack® |
Power Transformers | Safety isolation and distribution. | Power supplies, alarm, fire detection, and security systems, HVAC, lighting and medical equipment. Class 2, three phase, chassis mount, and PC mount designs available. | Signal | |
SMD Power Inductors & SMPS Transformers | A passive component that stores energy in a magnetic field. Widely used in analog electronic circuitry. | Switchmode power supplies, DC-DC converters, LED lighting, automotive and consumer electronics. | Signal | |
Discrete Components-Telecom | Condition, filter, and isolate the electronic signal to ensure accurate data/voice/video transmission. | Network switches, routers, hubs, and PCs used in 10/100/1000 Gigabit Ethernet and Power over Ethernet (PoE). | Bel |
Power Solutions & Protection
Bel's power conversion products include AC-DC power supplies, DC-DC converters and battery charging solutions. The DC-DC product offering consists of standard and custom isolated and non-isolated DC-DC converters designed specifically to power low voltage silicon devices or provide regulated mid-bus voltages. The need for converting one DC voltage to another is growing rapidly as developers of integrated circuits commonly adjust the supply voltage as a means of optimizing device performance. The DC-DC converters are used in data networking equipment, distributed power architecture, and telecommunication devices, as well as data storage systems, computers and peripherals. Opportunities for the DC-DC products also extend into industrial applications.
With the acquisition of the Power-One Power Solutions business from ABB in 2014, Bel's power solutions product portfolio, R&D capabilities and customer base have significantly expanded. Already a leader in DC/DC board mount products, Bel now offers a sizeable portfolio of AC/DC products with industry leading efficiency and power density. The acquisition of Power Solutions has also added considerable presence in the railway market and broader industrial markets with Melcher branded products. The Melcher brand is well known for reliability and performance in demanding applications.
Bel circuit protection products include board level fuses (miniature, micro and surface mount), and Polymeric PTC (Positive Temperature Coefficient) devices, designed for the global electronic and telecommunication markets. Fuses and PTC devices prevent currents in an electrical circuit from exceeding certain predetermined levels, acting as a safety valve to protect expensive components from damage by cutting off high currents before they can generate enough heat to cause smoke or fire. Additionally, PTC devices are resettable and do not have to be replaced before normal operation of the end product can resume.
2
Product Line | Function | Applications | Brands Sold Under | |
Power Solutions & Protection | Front-End Power Supplies | Provides the primary point of isolation between AC main line (input) and the low-voltage DC output that is used to power all electronics downstream | Servers, telecommunication, network and data storage equipment | Bel Power Solutions, Power-One |
Board-Mount Power Products | These are designed to be mounted on a circuit board. These converters take input voltage and provide localized on-board power to low-voltage electronics. | Telecom (central office switches), networking and a broad range of industrial applications | Bel Power Solutions, Power-One, Melcher | |
Industrial Power Products | Converts between AC main line inputs and a wide variety of DC output voltages. | Rail, transportation, automation, test and measurement, medical, military and aerospace applications. | Bel Power Solutions, Power-One, Melcher | |
Module Products | Condition, filter, and isolate the electronic signal to ensure accurate data/voice/video transmission within a highly integrated, reduced footprint. | Broadband equipment, home networking, set top boxes, and telecom equipment supporting ISDN, T1/E1 and DSL technologies. Industrial applications include Smart Meters, Smart Grid communication platforms, vehicle communications and traffic management. | Bel | |
Circuit Protection | Protects devices by preventing current in an electrical circuit from exceeding acceptable levels. | Power supplies, cell phone chargers, consumer electronics, and battery protection. | Bel |
Connectivity Solutions
Bel offers a comprehensive line of high speed and harsh environment copper and optical fiber connectors and integrated assemblies, which provide connectivity for a wide range of applications across multiple industries including commercial aerospace, military communications, network infrastructure, structured building cabling and several industrial applications. Bel's Stewart Connector business designs and deploys modular connector systems primarily used in high speed Telecom/Datacom applications. In January 2010, Bel completed the acquisition of Cinch Connectors. Cinch products are designed and manufactured for high reliablity/harsh environment applications. Cinch also possesses various enabling technologies and expertise with which to provide custom solutions and products. In 2012, the acquisitions of Fiberco and GigaCom further enhanced the Cinch product offering with the addition of fiber optic connector and cable products optimized for harsh environment applications. In 2013, the acquisition of Array further broadened the copper based product portfolio and expanded sales within the aerospace market. The acquisition of Connectivity Solutions in 2014 brought additional products and has strengthened our position with strategic OEM customers in the military, aerospace and networking segments. Connectivity Solutions is a leading innovator and producer of RF coaxial connectors and cables, harsh environment optical active and passive devices, and microwave components.
3
Product Line | Function | Applications | Brands Sold Under | |
Connectivity Solutions | Expanded Beam Fiber Optic Connectors, Cable Assemblies and Active Optical Devices (transceivers and media converters) | Harsh-environment, high-reliability, flight-grade optical connectivity for high-speed communications. | Military/aerospace, oil and gas well monitoring and exploration, broadcast, communications, RADAR | Stratos, Fibreco |
Copper-based Connectors / Cable Assemblies-FQIS | Harsh-environment, high-reliability connectivity and fuel quantity monitoring (FQIS). | Commercial aerospace, avionics, smart munitions, communications, navigations and various industrial equipment | Cinch | |
RF Connectors, Cable Assemblies, Microwave Devices and Low Loss Cable | Connectors and cable assemblies designed to provide connectivity within radio frequency (RF) applications. | Military/aerospace, test and measurement, high-frequency and wireless communications | Johnson, Trompeter, Midwest Microwave, Semflex | |
RJ Connectors and Cable Assemblies | RJ45 and RJ11 connectivity for data/voice/video transmission. | Largely Ethernet applications including network routers, hubs, switches, and patch panels. | Stewart Connector |
1.3 Supply Chain Overview
The Company has multiple suppliers for most of the raw materials it purchases.
At December 31, 2015, the Company operated 23 manufacturing facilities in 7 countries. The following is a list of the locations of those manufacturing facilities and the Product Groups produced at each facility:
Location of Facility | Approximate Square Feet | Product Groups Produced at Facility | Percentage of Facility Used for Manufacturing |
Dongguan, People's Republic of China | 650,000 | Magnetic Solutions | 28% |
Pingguo, People's Republic of China | 251,000 | All three product groups | 71% |
Shanghai, People's Republic of China | 32,000 | Connectivity Solutions | 70% |
Shenzhen, People's Republic of China | 227,000 | Power Solutions & Protection | 100% |
Zhongshan, People's Republic of China | 315,000 | All three product groups | 86% |
Zhongshan, People's Republic of China | 118,000 | All three product groups | 100% |
Zhongshan, People's Republic of China | 78,000 | All three product groups | 100% |
Louny, Czech Republic | 11,000 | Connectivity Solutions | 75% |
Dubnica nad Vahom, Slovakia | 35,000 | Power Solutions & Protection | 100% |
Dubnica nad Vahom, Slovakia | 70,000 | Power Solutions & Protection | 100% |
Worksop, England | 52,000 | Connectivity Solutions | 28% |
Great Dunmow, England | 9,000 | Connectivity Solutions | 52% |
Chelmsford, United Kingdom | 21,000 | Connectivity Solutions | 60% |
Dominican Republic | 41,000 | Magnetic Solutions | 85% |
Cananea, Mexico | 42,000 | Connectivity Solutions | 60% |
Reynosa, Mexico | 77,000 | Connectivity Solutions | 56% |
Inwood, New York | 39,000 | Magnetic Solutions | 40% |
Glen Rock, Pennsylvania | 74,000 | Connectivity Solutions | 60% |
Waseca, Minnesota | 124,000 | Connectivity Solutions | 83% |
McAllen, Texas | 40,000 | Connectivity Solutions | 56% |
Miami, Florida | 29,000 | Connectivity Solutions | 85% |
Melbourne, Florida | 18,000 | Connectivity Solutions | 64% |
Mesa, Arizona | 7,000 | Connectivity Solutions | 100% |
4
We rely on our direct suppliers to provide information as to whether Conflict Minerals are contained in components and materials supplied to us, including sources of Conflict Minerals that may be supplied to our direct suppliers from lower tier suppliers as further discussed in Section 2 of this Report.
It is not practicable to conduct a survey of all of our suppliers; therefore, we believed a good faith reasonable due diligence approach was to conduct a survey of our top suppliers, based on the percentage of "raw material spend," as further described under "Due Diligence Process" below.
In accordance with the requirements of Form SD, this Report includes:
• | a description of the measures we took to exercise due diligence on the Conflict Minerals' source and chain of custody; |
• | a description of the products manufactured or contracted to be manufactured that contain Conflict Minerals; |
• | the facilities used to process the Conflict Minerals; |
• | the country of origin of the Conflict Minerals to the extent available; and |
• | the efforts to determine the mine or location of origin. |
We participate in a number of industry-wide initiatives described in Section 2 of this Report. This Report is available on our website at www.belfuse.com.
1.4 Conflict Minerals Policy
We have adopted the following conflict minerals policy statement (the "CM Policy"):
Conflict Free Sourcing Statement
Conflict metals are metals such as gold (Au), tantalum (Ta), tungsten (W), and tin (Sn) derived from minerals being sourced from mines in Democratic Republic of Congo (DRC) conflict areas which are controlled by non-government military groups, or unlawful military factions. Illegal mining profits by local military groups in the DRC are used to help finance area conflict, while also contributing to human rights abuses and environmental degradation.
Bel expects its suppliers to comply with the Electronic Industry Code of Conduct (EICC), and as a result undertake commercially reasonable due diligence in dealing with their own supply chain with regard to this matter. Due to the various layers involved in our supply chain, we are currently unable to verify the source of all metals used in our products. In an effort to more clearly identify the origin of these specific metals, we've asked that our suppliers complete the EICC Conflict Mineral Reporting Template, and require they notify us immediately if they determine a conflict metal is being supplied to Bel as part of any item we source from them.
2. | Due Diligence Process |
2.1 | Design of Due Diligence |
We have conducted a good faith reasonable country of origin inquiry regarding Conflict Minerals. In July 2011, we commenced our due diligence measures, which are designed to conform, in all material respects, with the framework in The Organisation for Economic Co-operation and Development ("OECD") Due Diligence Guidance for Responsible Supply Chain of Minerals from Conflict-Affected and High-Risk Areas, including the related supplements on gold, tin, tantalum and tungsten (the "OECD Guidance").
5
2.2 | Management Systems |
As described above, we have adopted the CM Policy, which is posted on our website at www.belfuse.com, under "Investors & Governance, Conflict Free Statement."
Internal Team
The people responsible for purchasing and quality assurance at each of our facilities comprise our team. The team is responsible for implementing our Conflict Minerals compliance strategy and reports to our Vice President of Finance. We utilize the Conflict Free Sourcing Initiative ("CFSI") Conflict Mineral Reporting Template to collect, manage, aggregate, and report Conflict Minerals information, which we believe is an industry standard practice. Senior management of Bel is briefed about the results of our due diligence efforts on a regular basis.
Control Systems
Our supply chain is complex and includes many third parties between our direct suppliers and the original sources of the Conflict Minerals. As a result, we do not purchase Conflict Minerals directly from smelters or refiners and, therefore, do not have a direct relationship with smelters and refiners. We utilize the Electronics Industry Citizenship Coalition-Global e-Sustainability Initiative's ("EICC-GeSI"), which is an industry-wide initiative to disclose upstream sources in the supply chain.
Controls include, but are not limited to, our Code of Ethics, which outlines expected behaviors for all of our associates. The Code is posted on our website at www.belfuse.com, under "Investors & Governance, Code of Ethics." Since 2013, regardless of whether suppliers are directly subject to the Rule, our purchase orders incorporate our CM Policy by reference thereto.
Supplier Engagement
With respect to the OECD requirement to strengthen engagement with suppliers, we have provided education for our suppliers that are not required to be compliant with the Rule and encouraged our supply base to utilize EICC-GeSI, which is made available to them on a cost-free basis. As referenced above, since 2013, purchase orders issued to our suppliers incorporate our CM Policy by reference, whether or not such suppliers are directly subject to the Rule.
Grievance Mechanism
Bel's associates may report misconduct, raise issues or ask questions, including with respect to any questionable accounting, internal control or auditing matters concerning the Company, without fear of dismissal or retaliation of any kind. Reports may be made confidentially and/or anonymously online through www.ethicspoint.com.
In addition, the Board of Directors has established a procedure that enables shareholders to communicate in writing with members of the Board. Any such communication should be addressed to the Company's Secretary and should be sent to such individual c/o Bel Fuse Inc., 206 Van Vorst Street, Jersey City, New Jersey 07302. Any such communication must state, in a conspicuous manner, that it is intended for distribution to the entire Board of Directors. Shareholders may also communicate with the Board by directing communications through the Corporate Secretary by following instructions on the Company's website at www.belfuse.com. Under the procedures established by the Board, upon the receipt of such a communication, the Company's Secretary will send a copy of such communication to each member of the Board, identifying it as a communication received from a shareholder. Absent unusual circumstances, at the next regularly scheduled meeting of the Board held more than two days after such communication has been distributed, the Board will consider the substance of any such communication.
Maintain Records
We generally have a policy to retain all relevant documentation relating to our conflict minerals due diligence for an indefinite period of time.
2.3 | Identify and Assess Risk in the Supply Chain |
Because of our size, the complexity of our products, and the depth, breadth, and constant evolution of our supply chain, it is difficult to identify sources upstream from our direct suppliers. Accordingly, we participate in a number of industry-wide initiatives as described above.
6
We have identified our direct suppliers and we rely on these suppliers, whose raw materials may contain Conflict Minerals, to provide us with information about the source of such Conflict Minerals contained in the raw materials supplied to us. Our direct suppliers are similarly reliant upon information provided by their suppliers.
2.4 | Design and Implement a Strategy to Respond to Risks |
In response to this risk assessment, we have an approved risk management plan, through which the Conflict Minerals program is implemented, managed and monitored. Updates to this risk assessment are provided regularly to senior management.
As part of our risk management plan, to ensure suppliers understand our expectations, we have included our CM Policy on our website and held internal training sessions with our employees. This helps us to ensure that our employees are knowledgeable of the Rule and have the ability to inform our suppliers of the Rule. Since 2013, all purchase orders we issue incorporate our CM Policy by reference thereto.
As described in our CM Policy, we would engage any of our suppliers whom we have reason to believe are supplying us with Conflict Minerals from sources that may support conflict in any of the Covered Countries to establish an alternative source of such Conflict Minerals that does not support such conflict, as provided in the OECD Guidance. During the Reporting Period and as of the date hereof, we have found no instances where it was necessary to terminate a contract or find a replacement supplier.
2.5 | Carry out Independent Third Party Audit of Supply Chain Due Diligence at Identified Points in the Supply Chain |
We do not typically have a direct relationship with smelters and refiners and do not perform or direct audits of these entities within our supply chain.
3. | Due Diligence Results |
Requested Information
We conducted a survey of our top suppliers utilizing the CFSI Reporting Template (the "Template"). The Template was developed to facilitate disclosure and communication of information regarding smelters that provide materials within a company's supply chain. It includes questions regarding a company's conflict-free policy, engagement with its direct suppliers, and a listing of the smelters the company and its suppliers use. In addition, the Template contains questions about the origin of Conflict Minerals included in a company's products, as well as supplier due diligence. Written instructions and recorded training illustrating the use of the tool are available on EICC's website. We understand that the Template is being used by many companies in their due diligence processes related to Conflict Minerals.
Survey Responses
We surveyed suppliers to our various facilities which accounted for approximately 98.7% of our aggregate raw materials spend for 2015, as described below. The remaining raw material spend relates to our manufacturing locations in Miami, Florida and Louny, Czech Republic which have immaterial spend amounts related to Conflict Minerals. The Product Groups produced at each facility are set forth above in the chart under "1.3 Supply Chain Overview."
We surveyed an aggregate of 319 suppliers to our facilities in Shenzhen China and Slovakia, which represented 99% of raw material spend to suppliers of products or components that could contain Conflict Minerals at those facilities. All of those suppliers responded. A total of 805 smelters were identified, of which 306 were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 33.8% of our aggregate raw materials spend for 2015.
We surveyed an aggregate of 100 suppliers to our three facilities in Zhongshan, China and our facility in Pingguo, China, which represented approximately 94% of our raw materials spend for 2015 at those facilities. All of those suppliers responded. A total of 215 smelters were identified, all of which were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 23.6% of our aggregate raw materials spend for 2015.
We surveyed an aggregate of 149 suppliers to our facility in Dongguan, China, which represented 100% of our raw materials spend to suppliers of products or components that could contain Conflict Minerals at this facility. All of those suppliers responded. A total of 306 smelters were identified, of which 288 were on the Conflict Free Smelters list prepared by CFSI. This facility accounted for approximately 12.8% of our aggregate raw materials spend for 2015.
7
We surveyed an aggregate of 448 suppliers to our facilities in Shanghai, China, Chelmsford, United Kingdom, Waseca, Minnesota, Mesa, Arizona and Melbourne, Florida, which represented 90% of raw material spend to suppliers of products or components that could contain Conflict Minerals at those facilities. A total of 282 of those suppliers responded. A total of 295 smelters were identified, all of which were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 8.4% of our aggregate raw materials spend for 2015.
We surveyed an aggregate of approximately 200 suppliers to our facilities in McAllen, Texas and Reynosa, Mexico, which represented 100% of raw material spend to suppliers of products or components that could contain Conflict Minerals at those facilities. All of those suppliers responded. A total of 83 smelters were identified, all of which were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 8.2% of our aggregate raw materials spend for 2015.
We surveyed an aggregate of 18 suppliers to our facilities in Glen Rock, Pennsylvania and Cananea, Mexico, as they are the only suppliers who could possibly have used Conflict Minerals. The remainder of our suppliers to those facilities utilize plastics, wire or heatshrinks. All of those suppliers responded. A total of 10 smelters were identified, all of which were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 6.5% of our aggregate raw materials spend for 2015.
We surveyed an aggregate of 27 suppliers to our facilities in Inwood, New York and the Dominican Republic, which represented approximately 92% of our raw materials spend for 2015 at those facilities. A total of 26 of those suppliers responded. A total of 15 smelters were identified, all of which were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 3.1% of our aggregate raw materials spend for 2015.
We surveyed an aggregate of 10 suppliers to our facilities in Worksop and Great Dunmow, England, as they are the only suppliers who could possibly have used Conflict Minerals. The remainder of our suppliers to those facilities utilize plastics and packaging materials such as cardboard. A total of 7 of those suppliers responded. A total of 7 smelters were identified, all of which were on the Conflict Free Smelters list prepared by CFSI. These facilities accounted for approximately 2.3% of our aggregate raw materials spend for 2015.
We reviewed the responses we received against criteria developed to determine which required further engagement with our suppliers. These criteria included untimely or incomplete responses as well as inconsistencies within the data reported in the Template. Where further engagement was necessary, we have worked directly with these suppliers to provide us with revised responses. During the Reporting Period and as of the date hereof, we have found no instances where it was necessary to terminate a contract or find a replacement supplier.
Efforts to Determine Mine or Location of Origin
Through our participation in CFSI, the OECD implementation programs, and requests to our suppliers to complete the Template, we have determined that seeking information about smelters and refiners that may be included in our supply chain represents the most reasonable effort we can make to determine the mines or locations of origin of any Conflict Materials that may be used in our products. We continue to encourage our suppliers to use smelters that are on the Conflict Free Smelters list prepared by CFSI.
8