Kingston Systems (KSYT) 10QSB 2008 Q1 Quarterly report (small business)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

Quarterly Report Under Section 13 or 15(d)

of the Securities Exchange Act of 1934

FORM 10-QSB

For the Quarterly Period Ended June 30, 2007

Commission File Number: 0-15840

KINGSTON SYSTEMS INC.

(Exact name of registrant as specified in its charter)

Delaware	14-1688816
(State or other jurisdiction of	(I.R.S. Employer
incorporation or organization)	Identification No.)

8 Merrill Industrial Drive Unit 12
Hampton, New Hampshire	03842
(Address of principal executive offices)	(Zip code)

Registrant's telephone number: 603-758-1333

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding twelve months (or for such shorter period that the registrant was required to file such reports); and (2) has been subject to such filing requirements for the past 90 days. YES x NO o

Indicate by check mark whether the registrant is an accelerated Filer (as defined in Rule 12-b-2 of the Exchange Act).

YES o NO x

Indicate the number of shares outstanding of each of the issuer's classes of common stock, as of the close of the latest practical date.

Title of Class	Number of Shares Outstanding
Common Stock (par value $0.01 per share)	5,576,234 as of August 10, 2007

INDEX

	Page
	Number
PART I. FINANCIAL INFORMATION
Item 1. Unaudited Financial Statements
Unaudited Condensed Consolidated Balance Sheets as of
June 30 and March 31, 2007		2
Unaudited Condensed Consolidated Statements of Operations for the
Three Months Ended June 30, 2007 and July 1, 2006		3
Unaudited Condensed Consolidated Statements of Cash Flows for the
Three Months Ended June 30, 2007 and July 1, 2006		4
Notes to the Unaudited Condensed Consolidated Financial Statements		5-9
Item 2. Management's Discussion and Analysis or Plan
of Operations		9-13
Item 3. Controls and procedures		14
PART II. OTHER INFORMATION
Item 1. Legal Proceedings		15
Item 2. Unregistered Sales of Equity Securities		15
Item 3. Defaults Upon Senior Securities		15
Item 4. Submission of Matters to a Vote of Security Holders		15
Item 5. Other Information		15
Item 6. Exhibits		15
Signatures		16
Exhibits		17-20

Page 1

ITEM 1: FINANCIAL STATEMENTS

KINGSTON SYSTEMS INC.

UNAUDITED CONDENSED CONSOLIDATED BALANCE SHEETS

	June 30, 2007			March 31, 2007
ASSETS
CURRENT ASSETS:
Cash and cash equivalents	$	10,934		$	42,194
Accounts receivable, less allowance for doubtful accounts of $2,474 and $0 as of
June 30, 2007 and March 31, 2007, respectively		13,345			110,749
Inventory		92,582			89,391
Related party leases, current portion		26,960			25,841
Related party receivable		76,586			60,378
Other current assets		6,096			5,444
TOTAL CURRENT ASSETS		226,503			333,997
OTHER ASSETS:
Property and equipment, net of accumulated depreciation of $18,567
and $16,202 as of June 30, 2007 and March 31, 2007, respectively		38,232			40,598
Software, net of accumulated amortization of $3,925 and $2,315
as of June 30, 2007 and March 31, 2007, respectively		15,950			17,559
Software development costs, net of accumulated amortization of $33,833
and $29,006 as of June 30, 2007 and March 31, 2007, respectively		121,854			126,681
Security deposits		12,000			12,000
Related party leases, non-current portion		24,782			31,956
TOTAL ASSETS	$	439,321		$	562,791
LIABILITIES AND SHAREHOLDERS' DEFICIT
CURRENT LIABILITIES:
Accounts payable	$	66,094		$	41,613
Related party advances		956,147			854,848
Accrued expenses		45,589			63,964
Deferred revenue		79,682			24,582
Capitalized lease obligations, current portion		37,659			36,048
Credit card advances, related party		67,056			72,128
Credit card liability		76,586			60,378
Wages payable, related party		46,300			46,300
Notes payable, related parties, current portion including accrued interest
of $8,020 and $6,416 as of June 30, 2007 and March 31, 2007, respectively		44,220			38,616
Loan payable, Flood Trust, related party, including accrued interest of $9,995
and $8,000 as of June 30, 2007 and March 31, 2007, respectively		109,995			108,000
TOTAL CURRENT LIABILITIES		1,529,328			1,346,477
LONG TERM LIABILITIES:
Note payable, related party, non-current portion		44,000			48,000
Capitalized lease obligations, non-current portion		49,127			59,168
TOTAL LIABILITIES		1,622,455			1,453,645
SHAREHOLDERS' DEFICIT:
Common stock:
$0.01 par value; 10,000,000 shares authorized; 5,601,140 shares issued and
5,576,234 shares outstanding as of June 30, 2007 and March 31, 2007, respectively		56,012			56,012
Additional paid-in capital		11,838,230			11,838,230
Accumulated deficit		(13,036,620	)		(12,744,340	)
Treasury stock at cost; 24,906 shares		(40,756	)		(40,756	)
Total shareholders’ deficit		(1,183,134	)		(890,854	)
TOTAL LIABILITIES AND SHAREHOLDERS' DEFICIT	$	439,321		$	562,791

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

Page 2

KINGSTON SYSTEMS INC.

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

	THREE MONTHS ENDED
	June 30, 2007			July 1, 2006
Revenue	$	10,664		$	149,680
Manufacturing and materials cost of sales		26,073			116,610
Gross profit (loss)		(15,409	)		33,070
Operating expense:
Selling		34,566			7,539
General and administrative		176,670			89,782
Research and development		53,270			47,690
Total operating expense		264,506			145,011
Operating loss		(279,915	)		(111,941	)
Other expense:
Interest expense and financing fees		(12,365	)		(13,929	)
Total other expense		(12,365	)		(13,929	)
Net loss before provision
for income taxes		(292,280	)		(125,870	)
Provision for income taxes		-			-
Net loss	$	(292,280	)	$	(125,870	)
Basic and diluted loss
per share	$	(0.05	)	$	(0.02	)
Weighted-average number of
common shares outstanding		5,576,234			5,576,234

The accompanying notes are integral part of these unaudited condensed consolidated financial statements.

Page 3

KINGSTON SYSTEMS INC.

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

	THREE MONTHS ENDED
	June 30, 2007			July 1, 2006
CASH FLOWS FROM OPERATING ACTIVITIES:
Net loss	$	(292,280	)	$	(125,870	)
Adjustments to reconcile net loss to net cash
from operating activities:
Depreciation and amortization		8,801			7,577
Changes in assets and liabilities:
Accounts receivable		97,404			97,207
Inventory		(3,191	)		77,834
Accounts payable		24,482			(60,874	)
Other current assets		(652	)		-
Deferred revenue		55,101			(49,228	)
Accrued expenses		(18,374	)		2,580
Accrued interest		3,598			11,557
NET CASH FROM OPERATING ACTIVITIES		(125,111	)		(39,217	)
CASH FLOWS FROM INVESTING ACTIVITIES:
Purchases of equipment and software		-			(16,190	)
NET CASH FROM INVESTING ACTIVITIES		-			(16,190	)
CASH FLOWS FROM FINANCING ACTIVITIES:
Related party working capital advances		248,218			45,500
Payment of related party advances		(146,919	)		-
Payments on credit card advances, related party		(5,072	)		(4,801	)
Payments on capital lease		(2,376	)		(888	)
NET CASH FROM FINANCING ACTIVITIES		93,851			39,811
Net decrease in cash		(31,260	)		(15,596	)
Cash and cash equivalents, beginning		42,194			19,722
Cash and cash equivalents, ending	$	10,934		$	4,126
Supplemental disclosure of cash flow information:
Non-cash investing and financing activities:
Assumption of credit card liability from related party	$	16,208		$	-
Assumption of capital lease from related party		-			9,386
Reduction in capital lease liability from related party		(6,056	)		(3,387	)
Cash paid for interest	$	7,301		$	2,372
Cash paid for income taxes		-			-

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

Page 4

KINGSTON SYSTEMS INC.

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1 -- ORGANIZATION AND SIGNIFICANT ACCOUNTING POLICIES

Organization, Acquisitions and Mergers and Controlling Shareholder -- Kingston Systems Inc. ("Kingston” or the “Company") was incorporated in 1983 and reincorporated in Delaware on January 12, 1987. From 1987 through 1988, the Company operated a proprietary recovery system that reclaimed paper pulp and non-biodegradable polyethylene from packaging material scrap. The Company sold the recovered fiber as substitute for virgin wood pulp and the reclaimed polyethylene for use in injection molding. The Company experienced some difficult and turbulent periods and was dormant for an extended period, from its last Securities and Exchange Commission (“SEC”) filing of a Form 10-Q for the period ended December 31, 1988 until August of 2005 when, as disclosed in a Form 8-K filed on August 19, 2005, the Company acquired all of the issued and outstanding common stock of Parallel Robotics Systems Corporation (“Robotics”), making Robotics a wholly-owned subsidiary.

Robotics is in the business of manufacturing robotic machinery and it has been an operating company since February 11, 2002.

The majority and controlling shareholders of the Company are the following:

Name	Shares		Comments
Kingston Associates		105,902		Limited Partnership 60% controlled by Ralph McKittrick, CEO of Kingston Systems
Ralph McKittrick		32,453
Thor Corporation		2,332,133		Thor Corporation is 100% controlled by Ralph McKittrick
Flood Trust		612,251
Treasury Shares		24,906
All others		2,493,495
Total		5,601,140

Nature of Business -- The Company’s revenue generating subsidiary, Robotics, is in the business of building robots, called rotopods and hexapods. These robots are similar to the type of apparatus used to move flight simulators. The robots allow movement in all geometric planes of motion and are primarily purchased by companies for product development and testing, although some robots are used in manufacturing. A significant component of the robot package is the customized software program that operates the robot’s motions. On average, it takes three to six months to build a robot. Although many of the components of a robot are standard from contract to contract, each contract typically requires certain modifications to the standard product. A single contract generally generates revenue of approximately $125,000.

Basis of Presentation -- The financial statements included in the Form 10-QSB have been prepared in accordance with generally accepted accounting principles (“GAAP”) for interim financial information and with the instructions to Form 10-QSB and Item 310(b) of Regulation SB of the Securities Exchange Act of 1934. The financial information furnished in the accompanying condensed consolidated financial statements reflects all adjustments (consisting of only normal, recurring adjustments) which, in the opinion of management, are necessary for a fair presentation of the Company's financial position, the results of operations and cash flows for the periods presented. Certain information and footnote disclosures normally contained in financial statements prepared in accordance with GAAP have been omitted, pursuant to such rules and regulations. The Company’s fiscal year is from April 1 through March 31 (April 1, 2007 through March 31, 2008 is referred to as fiscal 2008 in this report).

Condensed Interim Financial Statements -- The accompanying unaudited condensed consolidated financial statements include the accounts of Kingston, and its subsidiary, Robotics. These financial statements should be read in conjunction with the Company’s Form 10-KSB for the fiscal year ended March 31, 2007, on file with the SEC. These financial statements are condensed and, therefore, do not include all disclosures normally required by accounting principles generally accepted in the United States of America. In particular, the Company’s organization, nature of operations and significant accounting policies were presented in Note 1 to the financial statements in that report. The results of operations presented in the accompanying condensed consolidated financial statements are not necessarily indicative of the results that may be expected for the full year ending March 31, 2008.

Consolidation -- The accompanying unaudited condensed consolidated financial statements include the accounts and transactions of Kingston and Robotics for all periods presented. Intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates -- The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Page 5

KINGSTON SYSTEMS INC.

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

Revenue Recognition -- The Company categorizes all pre-shipment progress payments from the customers and service agreement revenues as “deferred revenue” on the balance sheet. Upon shipment of the robot, the Company releases the prepayment liabilities to revenue, along with the related cost of sales. The Company recognizes any deferred service agreement revenue over the life of the agreement. Costs are recognized as incurred.

Business Condition -- The accompanying unaudited condensed consolidated financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. As shown in the unaudited condensed consolidated financial statements for the three month period ended June 30, 2007, the Company incurred a net loss of $292,280. As noted in the previous paragraph, the Company’s subsidiary, Robotics, receives progress payments from customers that are not recognized as revenue until the product is shipped or billed as a completed unit sold. That customer prepayment liability was $57,600 at June 30, 2007 (shown as a component of “deferred revenue” on the Company’s balance sheet) and reflects revenue whichis expected to be recognized in the 2008 fiscal year. Nonetheless, the losses from operations and the current ratio deficit raise substantial doubt about the Company's ability to continue as a going concern for a reasonable period of time. The condensed consolidated financial statements do not include any adjustments relating to the recoverability and classification of recorded assets or the amount and classification of liabilities which might be necessary should the Company be unable to continue as a going concern. The Company's continuation as a going concern is dependent upon its ability to generate sufficient cash flows to meet its obligations on a timely basis, to obtain additional financing as may be required, and ultimately to attain successful operations for an extended period of time. Should the Company not succeed in its pursuit of either equity financing, debt financing, or significant sales improvements, the Company may not be able to continue as a going concern and may need to curtail operations.

Accounts Receivable -- Accounts receivable are recorded at the invoiced amount. An allowance for doubtful accounts would be the Company’s best estimate of the amount of probable credit losses in the Company’s existing accounts receivable. Management regularly analyzes accounts receivable, including any historical write-off experience, customer creditworthiness and current economic trends to determine a need, if any, for an allowance for doubtful accounts. As of June 30 and March 31, 2007, allowance for doubtful accounts was $2,474 and $0, respectively .

In November, 2006 the Company negotiated the terms of sale for segments of the Company’s accounts receivable to LSQ Funding Group, L.C. (“LSQ) located in Orlando, Florida. The terms include the provisions that the initial payment to the Company will be approximately 80% of the approved receivables purchased and that the Company is to receive the balance of 20 % of the total receivable, less applicable finance fees of 2% of the receivable balance factored and additional administrative fees, when the customer pays the total receivable to LSQ. In the first quarter of the Company’s 2008 fiscal year, the Company had no new factoring transactions and has received $49,070 of receivables from previous transactions, less applicable fees of $1,466 (shown as a component of interest expense in the Company's statement of operations).

Inventory -- Inventory is stated at the lower of cost (first-in, first-out) or market. Market value is estimated based upon assumptions made about future demand and market conditions. If the Company determines that the actual market value differs from the carrying value of the inventory, the Company will make an adjustment to reduce the value of the inventory. At June 30 and March 31, 2007, inventory consisted of work in process materials, capitalized labor and spare parts. Those amounts were:

Inventory as of:	June 30, 2007		March 31, 2007
Work in Process	$	27,758	$	26,414
Capitalized Labor		40,591		40,526
Spare Parts		24,233		22,451
Total	$	92,582	$	89,391

Income Taxes -- No income taxes have been paid or accrued because the Company has had no net taxable income since inception for any fiscal period for which a tax return is required. The Company recognizes the amount of income taxes payable or refundable for the current year and recognizes deferred tax assets and liabilities for the future tax consequences attributable to differences between the financial statement amounts of certain assets and liabilities and their respective tax bases (if such a difference exists), and the effect of net operating loss carry-forwards. Deferred tax assets would be reduced by a valuation allowance to the extent that uncertainty exists as to whether the deferred tax assets would be ultimately realized.

Net Loss Per Share -- Basic earnings (loss) per share is calculated by dividing the income or loss available to common shareholders by the weighted-average number of common shares outstanding during each period. Diluted earnings (loss) per share is identical to basic earnings (loss) per share, as the Company has no dilutive securities at this time.

Page 6

KINGSTON SYSTEMS INC.

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

Intangible Assets -- The Company has an intangible asset, identified as “Software development” reflected on its consolidated balance sheet as of June 30, 2007. This robotic software is a long-term asset and is the Company-built control system software for operating the machines that Robotics has been manufacturing and selling, and continues to sell to various industries. The amortization periods for the software development asset have been determined to be five and ten years. The five year amortization period applies to the portion of the asset that was developed to support additional generic motion control systems. The ten year amortization period applies to the portion of the asset that was developed as additions to the core application programming, essential to the basic operation of the robot.

The carrying value of the software development asset is compared to its net realizable value at each balance sheet date, with any impairment recognized immediately. No material changes to management’s net realizable value estimate occurred in the three month period ended June 30, 2007.

Shipping Costs -- Costs to ship products to customers are charged to cost of sales as incurred. During the three month periods ended June 30, 2007 and July 1, 2006, the Company incurred $717 and $5,423 of shipping costs, respectively.

NOTE 2 -- RELATED PARTY TRANSACTIONS

As of June 30, 2007, the Company was involved in the following related party transactions:

·        The Company has a note payable, related party, to George Coupe in the amount of $200, included in notes payable, related parties, current portion on the Company’s June 30 and March 31, 2007 balance sheets. This demand note was issued in 2002 as part of the initial capitalization of Robotics and is due March 31, 2011. The note was non-interest bearing through April 1, 2006. Subsequent to that date, the note bears interest at the rate of 8.0% per year (accrued interest of $20 as of June 30, 2007).

·        The Company has a note payable, related party, non-interest bearing to Ralph McKittrick in the amount of $46,300 for unpaid wages prior to December 31, 1988. The amount of the debt has not changed since it was incurred. It is reflected in current liabilities on the Company’s June 30 and March 31, 2007 balance sheets.

·        The Company, through its Robotics subsidiary, has a relationship with a privately owned company named Holo-Dek Gaming Inc. (“Holo-Dek). Ralph McKittrick, the CEO of Kingston, is also the CEO of Holo-Dek (Ralph McKittrick is the largest shareholder, directly and indirectly, in Kingston and the second largest shareholder in Holo-Dek). Robotics and Holo-Dek share office facilities, a number of employees and certain expenses. The Flood Trust (the “Trust”), an investor in Kingston and Robotics, is also a significant lender of working capital to Holo-Dek. As of June 30 and March 31, 2007, Holo-Dek has provided working capital advances to the Company in the amount of $956,147 and $854,848, which are shown in current liabilities on the Company’s balance sheet. The indebtedness to Holo-Dek is evidenced by a note payable on demand on or after March 31, 2008. The note payable presently does not require the payment of interest. After March 31, 2008, the note will bear interest at the rate of 8.0% per annum.

·        The Company has credit card advances, related party, recorded in current liabilities on its June 30 and March 31, 2007 balance sheets. Those advances are from George Coupe, President of Robotics. Those advances are for the financing of operations and certain capital asset purchases. Those advances consist of the balances on personal credit cards of George Coupe that were and are being used exclusively for the Company’s expenditures. The interest rates being paid to the credit card companies for the three month period ended June 30, 2007 varied between 4.99% and 17.24%. The interest rates being paid to the credit card companies for the three month period ended July 1, 2006 varied between 2.99% and 16.74%. The average interest rate paid for the three month periods ended June 30, 2007 and July 1, 2006 was 10.28% and 7.19%, respectively.

·        Robotics has a licensing and royalty agreement with the Hexel Corporation ("Hexel") relating to the co-ownership of certain robotics technology originally developed by Hexel.  Hexel is still in existence, however, with limited operations. Two current employees of Robotics are stockholders in Hexel. In addition, a major stockholder in the Company also owns a minor interest in Hexel. Hexel has licensed the use of all intellectual property to Robotics.  Under the agreement, Robotics is required to pay to Hexel, on a quarterly reporting basis, 2% of gross sales, less shipping, tax, and other customary costs normally born by the seller, on products sold which incorporate the licensed software and intellectual property (the payment date was extended by Hexel to March 31, 2008). Any enhancements or developments by Robotics to the robot technology, including software, are co-owned with Hexel pursuant to the licensing agreement. At June 30 and March 31, 2007, $23,291 was owed to Hexel (included in accrued expenses on the Company’s balance sheet), with $0 and $16,171 recorded as expense during the three months ended June 30, 2007 and July 1, 2006, respectively.

·        The Company has a related party note and loan payable to the Trust, discussed in Note 3, and the Company is the lessee on four related party capital leases, discussed in Note 7.

·        The Company's Robotics subsidiary is the named owner on a number of credit cards used by Holo-Dek. As of June 30 and March 31, 2007, the balances on those credit cards totaled $76,586 and $60,378, respectively, and are recorded as a related party asset and credit card liability on the Company's balance sheets. Additionally, there is approximately $98,000 of total credit limit available on all Robotics credit cards, whether used by Robotics or Holo-Dek..

Page 7

KINGSTON SYSTEMS INC.

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

NOTE 3 -- NOTE AND LOAN PAYABLE

The Company has a note payable to the Trust for $80,000. Of that amount, $36,000 principal and $8,000 accrued interest is a current liability and $44,000 is a long term liability. This note was issued in 2002 as part of the initial capitalization of Robotics and requires yearly principal payments of $16,000 beginning in fiscal 2007 through March 31, 2011. The note was non-interest bearing through April 1, 2006 and now bears interest at the rate of 8.0% per year (unpaid interest will be compounded). The Company has not yet made a payment on this note and has received a waiver on payment of principal and interest until August 31, 2007 (see Item 2, “Overview” for more detail on the Company’s relationship with the Flood Trust). No late fees will be assessed until after August 31, 2007, if applicable.

The Company has a loan payable to the Trust in the amount of $100,000, plus accrued interest of $9,995, shown in current liabilities on the Company’s balance sheet. This loan was made in March of 2006 and is payable on demand on or after March 16, 2007 at the discretion of the Trust. The loan bears an annual interest rate of 8.0%. There has been no demand for payment by the Trust and no payments have been made by the Company.

See Note 7 regarding the Company’s capital lease obligations.

NOTE 4 -- INTANGIBLE ASSETS

The Company has an intangible asset, identified as “Software development” reflected on its consolidated balance sheets as of June 30 and March 31, 2007. This is a long-term asset and consists of the Robotics-built control system software for operating the machines that Robotics manufactures and sells to various industries. The software is used to drive the motion simulation robots that have been sold for bio medical research, positioning system robots for automotive production and motion testing robots for oil pipelines. An analysis of the new robotic capability or features that each new software project supports is conducted after the software project is completed and after the new capability is tested functionally in the robot. The results of this analysis are used to determine the expected life of the software for this new capability in terms of future revenues. This software is co-owned with the Hexel Corporation (see Note 2), the corporation that patented the robotic technology and licensed the robotic technology to Robotics. The carrying value of this software development asset is compared to its net realizable value at each balance sheet date, with any impairment recognized immediately. No material changes to management’s net realizable value estimate occurred in the three month period ended June 30, 2007 and management believes that the value of the software is not impaired at June 30, 2007. The amortization periods for the software development asset have been determined to be five and ten years. The five year amortization period applies to the portion of the asset that was developed to support additional generic motion control systems. The ten year amortization period applies to the portion of the asset that was developed as additions to the core application programming, essential to the basic operation of the robot.

NOTE 5 -- SHAREHOLDERS' DEFICIT

At June 30 and March 31, 2007, the Company had 5,601,140 shares of common stock issued and 5,576,234 shares outstanding. At June 30 and March 31, 2007, the Company had 10,000,000 shares authorized with a par value of $0.01. At June 30 and March 31, 2007, the Company had $11,838,230 in additional paid-in capital, and an accumulated deficit of $13,036,620 and $12,744,340, respectively. At June 30 and March 31, 2007 (fiscal year-end), the Company had 24,906 shares of treasury stock, stated at a cost of $40,756.

NOTE 6 -- INCOME TAXES

The Company had net operating loss (“NOL”) carry-forwards up to March 1988 when it last filed with the SEC and has had net operating losses since that date. These net operating loss carry-forwards expire after 15 years for losses incurred through March 1997 and after 20 years for losses incurred beginning with the March 1998 year-end. In accordance with the Internal Revenue Code, the amount of these NOL's which can be utilized by the Company is limited to an annual amount of approximately $79,531 and a total limit of approximately $1,590,627 over a 20 year period. As of March 31, 2007 (fiscal year-end), the Company had consolidated net operating loss carry-forwards for federal income tax reporting purposes of approximately $2,206,584 which, if unused, will expire between 2008 and 2026.

NOTE 7 -- COMMITMENTS AND CONTINGENCIES

Operating Lease

The Company’s Robotics subsidiary has a lease obligation for office space and an assembly/ research and development facility in Hampton, New Hampshire, which is accounted for as an operating lease. The term of the lease is six years, ending March 31, 2008. The lease includes a base rent and common area/maintenance payment. As discussed in Note 2, Robotics shares office space with Holo-Dek. The costs of leasing the facility in Hampton, New Hampshire are allocated between the two companies based upon square footage. The Company’s share of the leasing costs for the three month periods ended June 30, 2007 and July 1, 2006 were $12,956 and $8,421, respectively. The increase in rent over the prior period was primarily due to an increase in space being utilized by Robotics.

Capital Leases

The Company has executed capital leases for manufacturing equipment and software in the aggregate amount of $44,447. As of June 30, 2007, accumulated depreciation on the equipment was $7,684 and the net book value was $36,763.

Page 8

KINGSTON SYSTEMS INC.

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS AND ITEM 2

The Company’s Robotics subsidiary is the named lessee on four leases used to acquire equipment for Holo-Dek (see Note 2). The Company has ultimate responsibility to make all payments regarding the leases. A total of $81,505 of equipment was acquired. The leases are reflected on the Company’s balance sheet as a related party lease asset and a capitalized lease obligation.

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OR PLAN OF OPERATIONS

General

The following discussion and analysis should be read in conjunction with the condensed consolidated financial statements and notes thereto appearing elsewhere in this Form 10-QSB. This management's discussion and analysis contains certain "forward-looking statements". Such statements relating to future events and financial performance are forward-looking statements that involve risks and uncertainties, detailed from time to time in the Company's various SEC filings. No assurance can be given that any such matters will be realized.

Overview

Management’s plan of operations for the next twelve months is to expand Robotic’s business, increasing revenue volume and improving operating margins, in order to reduce, and eventually eliminate, its historical net losses. There are current activities that are critical to successfully achieving that plan. The Company is working to sell a new robot application, consisting of a hexapod-mounted water jet cutter (“Hex-A-Jet”), into markets that have been previously untapped for robot sales. The Company has identified an opportunity to become a significant supplier of robots to Holo-Dek, which will use those robots in their planned build-out of video gaming centers. The Company has been considering acquiring Holo-Dek as part of its business expansion plan. There can be no assurance that the management’s plan of operations will be successful.

The Company is also evaluating its cost structure and robot designs in order to minimize cost of sales for each robot sale. A good portion of that cost reduction is expected to come from cost savings related to volume purchases of fabrications and purchased parts. An additional component of cost reduction may result from research and development, as the Company continues to focus on standardization, in order to reduce or eliminate non-recurring engineering and design costs, and to develop new applications and additional markets for existing robot designs. In addition, the Company has recently designed a hexapod that employs slides instead of carriages around a ring, or actuators and integral electromechanical systems, eliminating the need for a large and expensive control cabinet that currently is situated near each robot, with control and power cables connecting the cabinet to the robot. As a result of this new design, this system is expected to be produced at a much lower cost than any robot the Company has ever made before, with significantly expanded market opportunities due to the lower prices that will now be possible for this new type of hexapod.

The Company is currently reliant upon working capital loans that originate primarily from the Flood Trust through its investments and loans to Holo-Dek which, in turn, are provided to the Company to offset the Company’s cash flow deficit. Although this funding source has proven reliable in the past (as the Trust, previously a significant provider of funding directly to Robotics, is also a significant provider of funding to Holo-Dek), there is no guarantee that this funding source will continue to be available for the next twelve months. The Company is also continuing to seek private investments from other sources, but presently has no definitive agreements in place with respect to obtaining such investments.

All of the aforementioned plans are highly uncertain. Should the Company not be able generate the funding necessary to meet its obligations on a timely basis, the Company may not be able to continue as a going concern and may need to curtail or cease operations.

Plan of Operations

As discussed in Note 1 and below in the Management’s Discussion and Analysis, Kingston was a dormant company from 1988 until, in August of 2005, Kingston acquired Robotics in an attempt to revive itself. Robotic’s business, although not yet profitable or cash flow self-sufficient, presents opportunities for expansion.

The Company’s head of sales is focused on selling robots into a number of venues. In existing markets, such as universities using the robots for bio-medical research, the Company is approaching existing customers for additional orders and exploring opportunities to sell products to other universities. But, the Company feels that its ability to achieve profitability is contingent upon new products and applications in new markets. The Company’s P3000 Water-Jet Cutter is a new product, (the water jet cutter is more accurate than the current devices in use and handles 5 axis work, which is currently rare in the industry), being direct-marketed at this time primarily to the heavy equipment industry and to defense contractors. Robotics has produced a special R 2000 machine for Holo-Dek. With this machine, Robotics is working on the perfection of a package that will allow Holo-Dek to integrate the simulator platform with different video games for the amusement of its customers. Robotics hopes to offer a similar product to companies involved with flight training for small aircraft. Finally, the Company is exploring new applications in the automotive parts and assembly markets.

Robotics also intends to adopt a strategy of pursuing the licensing of its core technology to strategic alliance partners. To date, no potential partners have signed a strategic partnership agreement with the Company. The plan is to have these partners manufacture and distribute entire machines, or Robotics may elect to provide only the core components. Robotics intends to be the primary provider of six degrees of freedom parallel platform manipulator robots to various new applications. By establishing such strategic relationships and leveraging the manufacturing and marketing strengths of such strategic partners, Robotics hopes to gain greater recognition.

Page 9

Given that the Company has limited funds available at this time, extensive marketing of its products is still only in the planning stages. The Company currently uses its head of sales, its web site and business contacts to market its products. The Company plans to develop more extensive use of print advertising and display its products at numerous industry conferences if improved sales provide additional funding.

Ongoing research and development is a priority of the Company, with the aim of providing both standardized and custom advanced hardware and software solutions to its customers in a wide variety of machine tooling, manufacturing, defense, R&D and other commercial settings. Currently, the Company’s engineers are focusing on a number of different arenas for research and development efforts. First, the Company will continue to work on the software algorithms to expand the applications and industries served by the Company. Second, the Company is exploring ways to improve upon the robot leg actuators purchased by developing new designs with its suppliers and manufacturing partners. This will allow the Company’s machines to achieve greater accuracy and allow the Company to purchase lower cost components when purchasing in larger volumes. Third, the Company is planning to use one of its platforms as a simulator for both the small aircraft flight training industry, as well as an interactive ride for video game entertainment. The research and development effort will seek to create the tools necessary for game developers and flight schools to integrate their current or future software products with the Company’s simulator.

Another area of research and development on which Robotics is focused on perfecting is the software and hardware capabilities of the R Series line for Robotic’s bio-medical opportunities. The main concentration has been implementing a dual encoder set-up on the motors to allow for precise motion under heavy and varied load, coupled with a software interface that allows communication directly with Math Lab and the Lab View products (which are standard in this industry).

On the P Series line, Robotics has focused on improving the joint retaining rings and sockets for improved accuracy, manufacturability and ease of assembly.

In regards to the Company’s Robotics business, given the current sales volumes, the Company does not expect to acquire or dispose of any significant amount of capital assets, nor does it expect to significantly expand or contract its current number of employees. If one or more of the above noted plans is successful and sales increase significantly, the Company would have to expand resources. Until sales improve, the Company will continue to be reliant upon working capital advances from the Flood Trust (through the Trust’s investments in Holo-Dek - the Company has been and is reliant upon the Flood Trust for the majority of its working capital financing) and other less significant sources of funding, to maintain its liquidity and continue operations. If such advances cease or are reduced, the Company would be forced to contract resources.

Results of Operations

Summary

Kingston was incorporated in 1983 and re-incorporated in Delaware in 1987. The Company operated a proprietary recovery system that reclaimed paper pulp and non-biodegradable polyethylene from packaging material scrap. The Company sold the recovered fiber as substitute for virgin wood pulp and the reclaimed polyethylene for use in injection molding. The Company experienced some difficult and turbulent periods and was dormant for an extended period, from its last SEC filing of a Form 10-Q for the period ended December 31, 1988 until August of 2005 when, as disclosed in a Form 8-K filed on August 19, 2005, the Company acquired all of the issued and outstanding common stock of Parallel Robotics Systems Corporation, making Robotics a wholly-owned subsidiary.

During the three month period ended June 30, 2007, the Company focused a significant amount of resources on developing its Robotics business. The Company focused its engineering staff on research and development, exploring new methods of utilizing the Company’s products in a variety of industries.

The Company, through its Robotics subsidiary, has a relationship with a privately owned company named Holo-Dek (see Note 2). Robotics and Holo-Dek share office facilities, a number of employees and certain expenses. Consequently, the Company has developed allocation methodologies to best determine the expenses to charge to each company. Space related costs are allocated based upon office square footage, while payroll related costs are allocated based upon time reports provided by the employees whose time is shared. This arrangement between the two companies provides flexibility to quickly re-allocate resources, dependent upon business conditions.

The Three Months Ended June 30, 2007 Compared to the Three Months Ended July 1, 2006

Revenues for the first quarter of fiscal 2008 and 2007 were $10,664 and $149,680, reflecting solely the revenues of Robotics in both periods. Equipment sales were $0 and $146,820 in the first quarters of fiscal 2008 and 2007, respectively. Although no robots were shipped in the three months ended June 30, 2007, the Company does have one order in process and is pursuing other orders that would generate second quarter deposits and third/fourth quarter revenue. One robot was shipped in the three months ended July 1, 2006. Total revenue related to the amortization of service agreement revenue was $2,500 for the first quarters of fiscal 2008 and 2007. The remaining revenue reflects service-related charges. As stated in Note 1, the Company accounts for all pre-shipment payments on its robotics products as a liability until the product is completed or shipped. As of June 30, 2007, that liability was $57,600. It is likely that the June 30, 2007 liability will be recognized as revenue during the second quarter of the Company’s 2008 fiscal year. As of June 30, 2007, the Company had $134,400 in progress payments not yet invoiced on its robot in process.

Page 10

Cost of sales was $26,073 and $116,610 for the first quarters of fiscal 2008 and 2007, respectively. In the first quarter of fiscal 2008, cost of sales represents overhead allocation and idle production salary costs. In the first quarter of 2007, cost of sales was comprised of costs related to a robot shipment, along with overhead allocation. As a percentage of revenue, cost of sales in the first quarter of fiscal 2007 was 78%, equal to the fiscal year 2007 percentage (As previously discussed in the “Overview” and “Plan of Operations,” the Company is working to reduce its overall cost structure). As stated in Note 1, the Company capitalizes direct material, direct labor and overhead costs that apply to Robotic’s customer orders in progress. That inventory is reclassified to cost of sales at the time the product is completed or shipped. As of June 30, 2007, the Company’s inventory was $92,582, which reflects $67,601 of customer order related inventory.

Selling expenses for the first quarters of fiscal 2008 and 2007 reflect solely the expenses of Robotics. The Company’s expenses were $34,566 and $7,539 respectively, which were comprised primarily of salaries related to the selling of Robotic’s products. The reason for the increase over the prior year period was primarily due to additional allocation of sales resources from Holo-Dek to Robotics, in an attempt to generate orders.

General and administrative expenses were $176,670 and $89,782 in the first quarters of fiscal 2008 and 2007. For the first quarter of fiscal 2008, the amount consisted of accounting and audit expenses of $22,157, engineering related expenses of $44,110, other payroll related expenses of $30,309, consulting expenses of $18,625, legal expenses of $5,112, rent and utility expenses of 10,308, insurance expenses of $10,637 and stockholder relations costs of $10,647. The remaining expenses of $24,765 were for travel, depreciation and other costs. For the first quarter of fiscal 2007, the amount consisted of engineering related expenses of $36,248, $18,789 of other payroll related expenses, rent and utility expenses of $14,836 and insurance expenses of $3,368. The remaining expenses of $16,441 were for travel, depreciation and other costs. The year over year increase in expenses was primarily due to more significant usage of legal, accounting, audit, consulting and stockholder relations services to support the Company’s public status and reporting requirements. Additionally, there was some usage of Holo-Dek resources by Robotics.

Research and development expenses were $53,270 and $47,690 for the first quarters of fiscal 2008 and 2007. In both quarters, those costs were primarily related to the allocation of the compensation of the engineering staff for time spent in the continuing development of Robotic’s products. The increase over the prior year period was primarily due to the allocation of a higher proportion of engineering time to research and development during the first quarter of 2008, compared with the first quarter of 2007.

Interest expense for the first quarters of fiscal 2008 and 2007 was $12,365 and $13,929. In the first quarter of 2008, this reflects interest related to the notes payable, related parties, the costs related to the factoring of the receivables and the credit card advances, related party. In 2007, the interest expense was primarily related to the judgment payable, which was subsequently settled in the fourth quarter of the Company’s 2007 fiscal year.

The Company’s loss for the first quarter of fiscal 2008 was $292,280 and the Company’s loss for the first quarter of fiscal 2007 was $125,870. These losses resulted in a per share loss of $0.05 and a per share loss of $0.02 in the first quarters of fiscal 2008 and 2007, respectively. The losses in the first quarter of 2008 resulted from the increase in general and administrative expenses (as discussed previously) and a revenue level insufficient to cover the fixed costs of operations.

Liquidity and Capital Resources

On an ongoing basis, the Company's primary needs for liquidity and capital resources are for the funding of salaries and other administrative expenses related to the management of the Company, for payment of the cost of products sold and inventory (if these expenditures are not covered by customer pre-shipment deposits) and, to a lesser degree, for research and development.

During the first three months of fiscal 2008, net cash used by operations was $125,111, compared with $39,217 used in the prior year period. In the first three months of fiscal 2008, the net loss was partially offset by the reduction in accounts receivable and an increase in deferred revenue, resulting from the Company’s receipt of payments from prior period sales and receipt of a deposit on a current period order (the Company’s backlog on this order is $134,400). In the prior year period, cash from accounts receivable and inventory, along with accrued interest on the judgment and loan payable, was primarily offset by the decreases in payables and deferred revenue, along with the net loss. This is consistent with the Company's fulfillment of a large order during the first quarter.

Net cash used in investing activities was $0 for the first three months of fiscal 2008, compared with net cash used of $16,190 for the prior year period. The use of funds in the first three months of fiscal 2007 was for testing equipment and capitalized labor.

Cash provided by financing activities was $93,851 for the first three months of fiscal 2008, compared with net cash provided of $39,811 for the first three months of fiscal 2007. The source of cash in both first quarters of the 2008 and 2007 fiscal years was from advances from Holo-Dek, a related party.

In November, 2006 the Company negotiated the terms of sale for segments of the Company’s accounts receivable to LSQ Funding Group, L.C. (“LSQ”) located in Orlando, Florida. The terms include the provisions that the initial payment to the Company will be approximately 80% of the approved receivables purchased and that the Company is to receive the balance of 20 % of the total receivable, less applicable finance fees of 2% of the receivable balance factored and additional administrative fees, when the customer pays the total receivable to LSQ. In the first quarter of the Company’s 2008 fiscal year, the Company had no new factoring transactions and has received $49,070 of receivables from previous transactions, less applicable fees of $1,466 (shown as a component of interest expense in the Company's statement of operations).

Page 11

The Company's cash and cash equivalents of $10,934 as of June 30, 2007, along with potential future sales revenue, is not presently sufficient to support current levels of operations for the next twelve months and it is therefore necessary for the Company to continue to seek additional financing. The Company is focusing its funding efforts on increasing its level of sales of robotic products. In the interim, the Company anticipates subsidizing its losses with working capital advances from Holo-Dek (Holo-Dek is funded by the Trust), although there can be no assurance that funding will continue to be available.

Given the aforementioned discussion, there is no assurance that the level of funding ultimately received by the Company will be sufficient to sustain the Company’s future operations. Should that occur, the Company may need to cease or curtail its operations.

Off Balance Sheet Arrangements

As of June 30, 2007, the Company had no off balance sheet arrangements with any parties.

Legal Contingencies

The Company may be subject to proceedings, lawsuits and other claims, including proceedings under laws and government regulations related to the environment, labor, product liability and other matters. The Company is required to assess the likelihood of any adverse judgments or outcomes to these matters, as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is based on a careful analysis of each individual issue with the assistance of outside legal counsel. The required reserves may change in the future due to new developments in each matter or changes in approach such as a change in settlement strategy in dealing with these matters. At June 30, 2007, there were no outstanding legal proceedings, nor are there any reserves established.

Critical Accounting Policies

The Company's discussion and analysis of its financial condition and results of operations is based upon its financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires the use of estimates that affect the reported amounts of assets, liabilities and expenses. The Company evaluates its estimates on an ongoing basis, including estimates for income tax assets and liabilities and the impairment of the value of investments. The Company bases its estimates on historical experience and on actual information and assumptions that are believed to be reasonable under the circumstances at that time. Actual results may differ from these estimates under different assumptions or conditions. The Company believes that the following critical accounting policies affect its more significant estimates used in the preparation of its financial statements.

Accounting for Income Taxes

The Company currently records a full valuation allowance against the deferred tax benefit for net operating losses generated, since in management's opinion the net operating losses do not meet the more likely than not criteria for future realization.

Impairment of Long-lived assets

The Company reviews estimates of the value of its long-lived assets each reporting period and will record an impairment loss to the extent that management believes that there has been an impairment to the carrying value.

Inventory Valuation

Inventory is stated at the lower of cost (first-in, first-out) or market. Market value is estimated based upon assumptions made about future demand and market conditions. If the Company determines that the actual market value differs from the carrying value of the inventory, the Company will make an adjustment to reduce the value of the inventory.

Recent Accounting Pronouncements

In June 2006, the Financial Accounting Standards Board (“FASB”) issued Interpretation (FIN) No. 48, “Accounting for Uncertainty in Income Taxes-an interpretation of FASB Statement No. 109.”  This Interpretation provides guidance for recognizing and measuring uncertain tax positions, as defined in Statement of Financial Accounting Standards (“SFAS”) No. 109, “Accounting for Income Taxes.”  FIN No. 48 prescribes a threshold condition that a tax position must meet for any of the benefit of an uncertain tax position to be recognized in the financial statements.  Guidance is also provided regarding derecognition, classification and disclosure of uncertain tax positions.  FIN No. 48 is effective for fiscal years beginning after December 15, 2006.  The Company does not expect that this Interpretation will have a material impact on the Company’s financial statements. 

In September 2006, the FASB issued SFAS No. 157 “Fair Value Measurements.” This standard addresses how companies should measure fair value when they are required to use a fair value measure for recognition or disclosure purposes under GAAP. This standard is effective for all financial statements issued for fiscal years beginning after November 15, 2007. The Company is in the process of evaluating whether this standard will have a material effect on its financial position, results of operations or cash flows.

In September 2006, the FASB issued SFAS No. 158 “Employers Accounting for Defined Benefit Pension and Other Postretirement Plans” — which amends SFAS No. 87 “Employers’ Accounting for Pensions”, SFAS No. 88 “Employers’ Accounting for Settlements and Curtailments of Defined Benefit Pension Plans and for Termination Benefits”, SFAS No. 106 “Employers Accounting for Postretirement Benefits Other Than Pensions” and SFAS No. 132(R) “ Employers’ Disclosures about Pensions and Other Postretirement Benefits.” This standard requires an employer to recognize the overfunded or underfunded status of defined benefit pension and other postretirement defined benefit plans, previously disclosed in the footnotes to the financial statements, as an asset or liability in its statement of financial position and to recognize changes in that funded status in the year in which the changes occur through comprehensive income. This standard also requires an employer to measure the funded status of a plan as of the date of its year end statement of financial position. In addition, this statement will require disclosure of the effects of the unrecognized gains or losses, prior service costs and transition asset or obligation on the next fiscal year’s net periodic benefit cost. This standard is effective for all financial statements issued for fiscal years ending after December 15, 2006 and retrospective application of this standard is not permitted. This standard will not have an effect on the Company’s financial statements.   

Page 12

In September 2006, the SEC staff issued Staff Accounting Bulletin ("SAB") Topic 1N, "Financial Statements - Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements" ( SAB 108). The SEC staff is providing guidance on how prior year misstatements should be taken into consideration when quantifying misstatements in current year financial statements for purposes of determining whether the current year's financial statements are materially misstated and should be restated. SAB 108 is effective for fiscal years ending after November 15, 2006.

In September 2006, the Emerging Issues Task Force ("EITF") issued EITF Abstracts Issue No. 06-3 (EITF 06-3). The EITF is providing guidance on how taxes collected from customers and remitted to Governmental Authorities should be presented in the income statements. EITF 06-3 is effective for interim and annual periods beginning after December 15, 2006. EITF 06-3 does not have an impact on the Company's financial statements.

In February 2007, the FASB issued SFAS No. 159 “The Fair Value Option for Financial Assets and Financial Liabilities-Including an Amendment of FASB Statement No. 115.” This Statement permits entities to choose to measure many financial instruments and certain other items at fair value. This Statement applies to all entities, including not-for-profit organizations. Most of the provisions of this Statement apply only to entities that elect the fair value option. However, the amendment to FASB Statement No. 115, “Accounting for Certain Investments in Debt and Equity Securities,” applies to all entities with available-for-sale and trading securities. Some requirements apply differently to entities that do not report net income. The fair value option established by this Statement permits all entities to choose to measure eligible items at fair value at specified election dates. A business entity shall report unrealized gains and losses on items for which the fair value option has been elected in earnings (or another performance indicator if the business entity does not report earnings) at each subsequent reporting date. This Statement is effective as of the beginning of an entity’s first fiscal year that begins after November 15, 2007. Early adoption is permitted as of the beginning of a fiscal year that begins on or before November 15, 2007, provided the entity also elects to apply the provisions of FASB Statement No. 157, “Fair Value Measurements.” No entity is permitted to apply this Statement retrospectively to fiscal years preceding the effective date unless the entity chooses early adoption. The choice to adopt early should be made after issuance of this Statement but within 120 days of the beginning of the fiscal year of adoption, provided the entity has not yet issued financial statements, including required notes to those financial statements, for any interim period of the fiscal year of adoption. This Statement permits application to eligible items existing at the effective date (or early adoption date). The Company does not expect this standard to have a material effect on its financial statements.

Forward-looking Statements

Statements contained in this Form 10-QSB that are not historical facts are forward-looking statements. Such forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements or events, or timing of events, to differ materially from any future results, performance or achievements or events, or timing of events, expressed or implied by such forward-looking statements. The Company cannot assure that it will be able to anticipate or respond timely to the changes that could adversely affect the Company’s operating results in one or more fiscal quarters. Results in operations in any past period should not be considered indicative of results to be expected in future periods.

While the Company continues to seek additional financing to support operations, there can be no assurance that any such financing will be available on acceptable terms. If such financing is not available on acceptable terms, the Company may be unable to expand or continue its business as desired and operating results may be adversely affected. Debt financing, if available, will increase expenses and must be repaid, regardless of operating results. Equity financing could result in dilution to existing stockholders.

Some of the more prominent known risks and uncertainties of the Company’s business are set forth below. However, this section does not discuss all possible risks and uncertainties to which the Company is subject, nor can it be assumed that there are not risks and uncertainties which may be more significant.

·   The Company’s losses from period to period.

·   The Company’s current dependence upon a limited number of investors for financing.

·   The Company’s ability to successfully market and sell its products in view of changing trends, acceptance of products and technology and other factors affecting market conditions, including the current U.S. economic environment and the global economic and political uncertainties resulting from the continuing war on terrorism.

·   The Company’s ability to locate and retain suppliers to deliver parts or materials on time or compliant with the specifications required by the Company, and at competitive prices.

·   The Company’s reliance upon a limited number of key suppliers.

The Company undertakes no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.

Page 13

ITEM 3. CONTROLS AND PROCEDURES

Evaluation of disclosure controls and procedures

The Company maintains disclosure controls and procedures designed to ensure that information required to be disclosed in the Company's reports filed under the Securities Exchange Act of 1934, as amended (the "Exchange Act"), is recorded, processed, summarized, and reported within the required time periods, and that such information is accumulated and communicated to the Company's management, including the Chief Executive Officer and Chief Financial Officer, as appropriate, to allow for timely decisions regarding disclosure.

As required by Rule 13a-15 under the Exchange Act, the Company has completed an evaluation, under the supervision and with the participation of management, including the Chief Executive Officer and Chief Financial Officer, of the effectiveness and the design and operation of the Company's disclosure controls and procedures as of June 30, 2007. Based upon this evaluation, management, including the Chief Executive Officer and Chief Financial Officer, have concluded that the Company's disclosure controls and procedures were effective as of June 30, 2007 to ensure that material information relating to the Company is recorded, processed, summarized and reported within the time periods in which this Report on Form10-QSB has been prepared. Management has concluded that the consolidated financial statements included in this Form 10-QSB present fairly, in all material respects, the results of the Company's operations and its financial position for the periods presented, in conformity with generally accepted accounting principles.

Changes in internal control over financial reporting

The Company's Chief Executive Officer and Chief Financial Officer have concluded that there were no significant changes in the Company's internal controls or in other factors that could significantly affect the effectiveness of these controls for the three months ended June 30, 2007, the date of their most recent evaluation of such controls, and that there were no significant deficiencies or material weaknesses in the Company's internal controls.

Section 404 Assessment. Section 404 of the Sarbanes-Oxley Act of 2002 requires management's annual review and evaluation of the Company's internal controls, and an attestation of the effectiveness of these controls by the Company's independent registered public accountants, beginning with the Company's Form10-KSB for the fiscal year ending on March 31, 2009. The Company plans to dedicate significant resources, including management time and effort, in connection with the Company's Section 404 assessment. The evaluation of the Company's internal controls will be conducted under the direction of its senior management.

Limitations on Effectiveness of Controls. A system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the system will meet its objectives. The design of a control system is based, in part, upon the benefits of the control system relative to its costs. Control systems can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. In addition, over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. In addition, the design of any control system is based in part upon assumptions about the likelihood of future events

Page 14

PART II OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

None.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES

None.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITIES HOLDERS

None

ITEM 5. OTHER INFORMATION

None

ITEM 6. EXHIBITS

a) EXHIBITS

31.1	Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2	Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1	Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2	Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

Page 15

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

KINGSTON SYSTEMS INC.

Date: August 14, 2007	By:	/s/ Ralph E. McKittrick
		Ralph E. McKittrick
		Chief Executive Officer

Date: August 14 , 2007	By:	/s/ George J. Coupe
		George J. Coupe
		Chief Financial Officer

Page 16