Perceptron 10K 2008 Annual report

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)


þ		ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, 2008


o		TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to .

Commission File Number: 0-20206

PERCEPTRON, INC.

(Exact Name of Registrant as Specified in Its Charter)


Michigan		38-2381442
(State or Other Jurisdiction of		(I.R.S. Employer
Incorporation or Organization)		Identification No.)

47827 Halyard Drive
Plymouth, Michigan 48170-2461
(Address of Principal Executive Offices)

(734) 414-6100
(Registrant’s telephone number, including area code)

Securities registered pursuant to section 12(b) of the Act:


Title of Each Class		Name of Each Exchange on Which Registered

Common Stock, $0.01 par value Rights to Purchase Preferred Stock		The NASDAQ Stock Market LLC

Securities registered pursuant to section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes o No þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes o No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ No o

Indicate by check mark if disclosure of delinquent filers pursuant to item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o

Accelerated filer þ

Non-accelerated filer o
(Do not check if a smaller reporting company)

Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes o No þ

The aggregate market value of the voting stock held as of the registrant’s most recently completed second fiscal quarter by non-affiliates of the registrant, based upon the closing sale price of the Common Stock on December 31, 2007, as reported by the NASDAQ Global Market, was approximately $90,000,000 (assuming, but not admitting for any purpose, that all directors and executive officers of the registrant are affiliates).

The number of shares of Common Stock, $0.01 par value, issued and outstanding as of September 08, 2008, was 8,850,359.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following document, to the extent specified in this report, are incorporated by reference in Part III of this report:


Document		Incorporated by reference in:

Proxy Statement for 2008
Annual Meeting of Shareholders		Part III, Items 10-14

PART I

ITEM 1: BUSINESS

General

Among the solutions offered by the Company are: 1) Laser-based, non-contact gauging systems that provide 100% in-line measurement for reduction of process variation; 2) Laser-based, non-contact systems that guide robots in a variety of automated assembly applications; 3) Laser-based, non-contact 3-D scanning systems that eliminate costly and complex mechanical devices, and; 4) Technology products and software for the Coordinate Measurement Machine (“CMM”), portable CMM, wheel alignment, reverse engineering, digitizing, inspection and forest products industry.

The Company’s current principal products are based upon proprietary three-dimensional image processing and AutoSolve^® feature extraction software algorithms combined with the TriCam^®three-dimensional object imaging technology. TriCam^® technology uses structured laser light triangulation techniques to obtain accurate three-dimensional measurements.

The Company is continuing to introduce new lines of electronic inspection products, also referred to in the Form 10-K as commercial products. The new lines are currently being sold to two original equipment manufacturers (“OEMs”). Distribution is through wholesale and retail distribution networks targeting both the professional tradesmen and the do-it-yourself homeowner. The products leverage the Company’s strong technical expertise in electronics, optics, and image processing.

The Company was incorporated in Michigan in 1981 and is headquartered at 47827 Halyard Drive, Plymouth, Michigan 48170-2461, (734) 414-6100. The Company also has operations in Munich, Germany; Voisins le Bretonneux, France; Barcelona, Spain; Sao Paulo, Brazil; Tokyo, Japan; Shanghai, China and Singapore.

Markets

The Company services multiple markets, with the largest being the automotive industry. The Company has product offerings encompassing virtually the entire automobile manufacturing process, including product development, manufacturing process development and implementation, stamping and fabrication, body shop, paint shop, trim, chassis and final assembly. The Company also believes there are applications for its three-dimensional measurement systems in other industrial and commercial applications. The foregoing statement is a “forward-looking statement” within the meaning of the Securities Exchange Act of 1934, as amended (“Exchange Act”). See Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Safe Harbor Statement” and Item 1A, “Risk Factors”, for a discussion of a number of uncertainties which could cause actual results to differ materially from those set forth in the forward-looking statement.

In 2007 the Company introduced a new electronic inspection product through a strategic partner, Ridge Tool Company (“Ridge Tool”). This first product has been sold to Ridge Tool and distributed through its wholesale and retail distribution networks targeting professional tradesmen and the do-it-yourself homeowner under the name the SeeSnake® micro™. In 2008 the Company began shipping a second electronic inspection product aimed at the mechanics and technician markets via an agreement with Snap-on Logistics Company, a subsidiary of Snap-on Incorporated (“Snap-on”).

Products and Applications

Automated Systems

AutoGauge^®: These systems are used in the assembly and fabrication plants of many of the world’s leading auto manufacturers and their suppliers to contain, correct and control the quality of body structures. AutoGauge^® systems are placed directly in the manufacturing line to automatically measure critical dimensional characteristics of automotive vehicles, sub-assemblies and parts using non-contact, laser triangulation sensors.

AutoGauge^® has the ability to provide hybrid systems containing both fixed-mounted sensors and robot-mounted sensors. This ability provides automotive manufacturers with the flexibility to measure multiple vehicle styles or part types on a single manufacturing line while maintaining their high-speed production rates.

AutoFit^®: These systems are used in automotive manufacturing plants to contain, correct and control the fit of exterior body panels. The system automatically measures, records and displays the gap and flushness of parts most visible to the automobile consumer such as gaps between front and rear doors, hoods and fenders, and decklids and rear quarter panels. The TriCam^® laser triangulation sensor has been enhanced to enable gap and flushness to be measured in several parts of the manufacturing process: in the body shop during assembly of non-painted vehicles, and in the final assembly area after the vehicle has been painted. AutoFit^® has the ability to measure vehicles while in motion along the assembly line or in a stationary position.

AutoScan^®: These systems provide a fast, non-contact method of gathering data for the analysis of the surface contour of a part or product such as automotive closure panels including doors, decklids, and hoods. These systems use a robot mounted Contour Tricam^® sensor specifically designed to “scan” a part as the robot moves throughout its path. The AutoScan^® system collects the “point cloud data” required for contour analysis and dimensional feature extraction. This allows the part’s shape to be automatically scanned and compared to a computer-generated design and to report specific measurements on the part.

AutoGuide^®: These robot guidance systems were developed in response to the increasing use of robots for flexible, automated assembly applications. These systems utilize Perceptron sensors and measurement technology to improve the accuracy of robotic assembly operations. AutoGuide^® systems calculate the difference between theoretical and actual relationships of a robot and the part being assembled and send compensation data, in six axes, to the robot. Robotic applications supported by AutoGuide^® include windshield insertion, roof loading, hinge mounting, door attachment, sealant application and many others.

Value Added Services The Company provides additional services including: training, field service, launch support services, consulting services, maintenance agreements, repairs, and software tools.

Technology Products

ScanWorks^®: The Company provides ScanWorks^® products to a variety of markets through third party original equipment manufacturers (“OEMs”), system integrators and value-added resellers (“VARs”). These products target the digitizing, reverse engineering, and inspection markets.

ScanWorks^® is a hardware/software component set that allows customers to add digitizing capabilities to their machines or systems. The use of the ScanWorks^® software and the Contour Probe^® sensor enables users to collect, display, manipulate and export large sets of “point cloud data” from optical tracking devices, portable CMMs or CMMs.

ToolKit is a software solution enabler used by CMM manufacturers, system integrators and application software developers. It enables the integration of Perceptron’s laser-based scanning technology into their proprietary systems.

Non-Contact Wheel Alignment Components (NCA): NCA components include WheelWorks^® software and sensors based upon the TriCam^® design. These technology components offer a fast, accurate, non-contact method of measuring wheel position for use in automated or manual wheel alignment machines in automotive assembly plants. The Company supplies NCA components to multiple wheel alignment machine OEMs in Europe, Asia and North America.

Forest Products: Under the terms of a Sensor Supply and Manufacturing License Agreement between the Company and U.S. Natural Resources, Inc., (USNR), (“Sensor Supply Agreement”), the Company manufactures and supplies TriCam^® sensors to USNR for use in various optimizing applications.

Commercial Products: The Company is continuing to introduce new lines of commercial products. The products leverage the Company’s strong technical expertise in electronics, optics, and image processing.

The first product in this line is sold to Ridge Tool pursuant to a long-term supply agreement. A version of the product is marketed by Ridge Tool under the product name SeeSnake^® microÔ to both the professional tradesmen and the do-it-yourself homeowner. The SeeSnake^® microÔ is an optical technology tool that allows its user to see in unreachable places, via a liquid crystal display screen on a hand held unit. It is used to detect and diagnose problems a tradesperson or homeowner may have beneath, behind, or in-between places that cannot otherwise be seen — such as around machinery, inside pipes, behind walls, inside ductwork, etc. Attachments also allow the user to retrieve loose objects via a hook or magnet. Details of the SeeSnake^® microÔ are available at the RIDGID^® website,www.ridgid.com. The information found on the Ridgid website is not part of this or any report the Company files with, or furnishes to, the SEC. The product is sold by Ridge Tool to professional tradesmen through distribution channels in the United States, Canada, Europe and Asia. The product is also sold by Ridge Tool to both professional tradesmen and homeowners through The Home Depot stores in the United States. The Company is in the process of developing additional products for sale to Ridge Tool that it expects to introduce in fiscal 2009 and beyond.

The Company’s second OEM partner is Snap-on. The initial product sold by Snap-on, the BK5500, Visual Inspection Device, was launched in the fourth quarter of fiscal 2008. The BK5500 is a live video scope for use in inspection of small

openings in automobiles, trucks and many other applications. Snap-on’s distribution is principally through their network of franchisee trucks and other Snap-on distribution in the United States, Canada, Europe and Asia.

The Company has additional commercial products planned that it expects to introduce in fiscal 2009 and beyond.

For information regarding net sales, operating income and net assets of the Company’s two business segments, Automated Systems and Technology Products, see Note 11 to the Consolidated Financial Statements “Segment and Geographic Information.”

Sales and Marketing

The Company markets its products directly to end users, and through manufacturing line builders, system integrators, VARs and OEMs.

The Company’s direct sales efforts are led by account managers who develop a close consultative selling relationship with the Company’s customers. The Company also provides Technology Products to selected system integrators, OEMs and VARs that integrate the Company’s products into their own systems and products for sales to end user customers.

The Company has two segments, its Automated Systems Segment and its Technology Products Segment.

The Company’s principal customers for its Automated Systems products have historically been automotive companies that the Company either sells to directly or through manufacturing line builders, system integrators or OEMs. The Company’s Automated Systems products are typically purchased for installation in connection with new model retooling programs undertaken by these companies. Because sales are dependent on the timing of customers’ re-tooling programs, sales by customer vary significantly from year to year, as do the Company’s largest customers. For the fiscal year ended June 30, 2008, approximately 26% of total net sales were derived from the Company’s four largest automotive customers (General Motors, Volkswagen, Chrysler, and BMW). For the fiscal year ended June 30, 2007 approximately 31% of total net sales were derived from the Company’s four largest automotive customers (Volkswagen, General Motors, DaimlerChrysler and BMW). For the fiscal year ended June 30, 2006, approximately 38%, of total net sales were derived from the Company’s four largest automotive customers (General Motors, Volkswagen, BMW and Peugeot Citroen). The Company also sells to system integrators or OEMs, who in turn sell to these same automotive companies. For the fiscal year ended June 30, 2008, 2007 and 2006, approximately 7%, 12% and 9%, respectively, of net sales were to manufacturing line builders, system integrators and OEMs for the benefit of the same four automotive companies. These numbers reflect consolidations that have occurred within the Company’s four largest automotive customers. During the fiscal year ended June 30, 2008, direct sales to General Motors accounted for approximately 10.7% of the Company’s total net sales. At June 30, 2008, accounts receivable from General Motors totaled approximately $410,000.

The Company sells its Technology Products to a variety of markets through OEMs, system integrators and VARs. These Technology Products target the digitizing, reverse engineering and inspection markets. The Company’s commercial products are currently sold to Ridge Tool and Snap-on for distribution through their wholesale and retail distribution networks. During the fiscal year ended June 30, 2008, sales to Ridge Tool were 23.0% of the Company’s total net sales. At June 30, 2008, accounts receivable from Ridge Tool totaled approximately $1.5 million.

In fiscal year 2002, the Company sold substantially all of the assets of its Forest Products business unit. As part of the sale, the Company and USNR entered into a Covenant Not to Compete dated March 13, 2002. The Company agreed, among other matters, for a period of ten years not to compete with USNR in any business in which the Forest Products business unit was engaged at any time during the three-year period prior to the closing of the transaction, and for so long as USNR is a customer of the Company, not to sell products or services intended primarily for operators of wood processing facilities or license any intellectual property to any third party primarily for use in any wood processing facility.

Manufacturing and Suppliers

The Company’s manufacturing operations consist primarily of final assembly, testing and integration of the Company’s software with individual components such as printed circuit boards manufactured by third parties according to the Company’s designs. The Company believes a low level of vertical integration gives it significant manufacturing flexibility and minimizes total product costs. The Company’s commercial products are manufactured for the Company by several subcontractors located in China.

The Company purchases a number of component parts and assemblies from single source suppliers. With respect to most of its components, the Company believes that alternate suppliers are readily available. Component supply shortages in certain industries, including the electronics industry, have occurred in the past and are possible in the future due to imbalances in supply and demand. Significant delays or interruptions in the delivery of components, assemblies or products by suppliers, or difficulties or delays in shifting manufacturing capacity to new suppliers, could have a material adverse effect on the Company.

International Operations

Europe: The Company’s European operations contributed approximately 33%, 43%, and 33%, of the Company’s net sales during the fiscal years ended June 30, 2008, 2007 and 2006, respectively. The Company’s wholly-owned subsidiary, Perceptron Europe B.V. (“Perceptron B.V.”), formed in The Netherlands, holds a 100% equity interest in Perceptron (Europe) GmbH (“Perceptron GmbH”). Perceptron GmbH is located in Munich, Germany and is the operational headquarters for the European market. Perceptron GmbH holds a 100% interest in Perceptron E.U.R.L. located in Voisins le Bretonneux, France and a 100% interest in Perceptron Iberica SL located in Barcelona, Spain. At June 30, 2008, the Company employed 61 people in its European operations.

Asia: The Company operates direct sales, application and support offices in Tokyo, Japan and Singapore to service customers in Asia. In fiscal 2008, the Company opened a direct sales, application and support office in Shanghai, China.

South America: The Company has a direct sales, application and support office in Sao Paulo, Brazil to service customers in South America.

The Company’s foreign operations are subject to certain risks typically encountered in such operations, including fluctuations in foreign currency exchange rates and controls, expropriation and other economic and local policies of foreign governments, and the laws and policies of the U.S. and local governments affecting foreign trade and investment. For information regarding net sales and identifiable assets of the Company’s foreign operations, see Note 11 to the Consolidated Financial Statements, “Segment and Geographic Information”.

Competition

The Company believes that its Automated Systems products provide the best and most complete solutions to its customers in terms of system capabilities and support, at a competitive price for the value provided, which it believes are the principal competitive factors. The principal competitive factors for the Company’s Technology Products are a competitive price for the level of functionality and reliability provided. The Company believes its Technology Products are well focused technologically and ergonomically toward the targeted end user’s requirements. There are a number of companies that sell similar and/or alternative technologies, methods and products into the same markets and regions as the Company.

The Company believes that there may be other entities, some of which may be substantially larger and have substantially greater resources than the Company, which may be engaged in the development of technology and products, which could prove to be competitive with those of the Company. In addition, the Company believes that certain existing and potential customers may be capable of internally developing their own technology. There can be no assurance that the Company will be able to successfully compete with any such entities, or that any competitive pressures will not result in price erosion or other factors, which will adversely affect the Company’s financial performance.

Backlog

As of June 30, 2008, the Company had a backlog of $25.4 million, compared to $23.0 million at June 30, 2007. Most of the backlog is subject to cancellation by the customer. The level of order backlog at any particular time is not necessarily indicative of the future operating performance of the Company. The Company expects to be able to fill substantially all of the orders in its backlog by June 30, 2009.

Research and Development

The Company has multiple development initiatives focused on new products to: increase market share penetration in existing markets; expand into new and adjacent markets and to diversify into new, non-adjacent markets. The Company also has multiple development initiatives focused on the continuous improvement of our existing products and systems to: reduce material and installation costs; enhance performance; add new features and functionality; and to incorporate appropriate new technologies as they emerge.

The Company’s Automated Systems research, development and engineering activities are currently focused on: high-accuracy, laser-based dimensional sensors; high-accuracy, high-throughput scanning sensors; complex feature recognition algorithms; specialized three-dimensional metrology software; manufacturing process display and analysis software; control system and robotic interface software; and related cell and system hardware. Research and development efforts in the Technology Products segment include new commercial products that use advance technology and products for use in additional industries. As of June 30, 2008, 59 persons employed by the Company were focused primarily on research, development and engineering.

For the fiscal years ended June 30, 2008, 2007 and 2006, the Company’s research, development and engineering expenses were $8.6 million, $7.9 million and $7.8 million, respectively.

Patents, Trade Secrets and Confidentiality Agreements

As of June 30, 2008, the Company has been granted 27 U.S. patents and has pending 16 U.S. patent applications, which relate to various products and processes manufactured, used, and/or sold by the Company, including 7 patents and 14 patent applications relating to its Technology Products. The Company also has been granted 10 foreign patents in Canada, Europe and Japan and has 19 patent applications pending in foreign locations, including 3 patents and 11 patent applications relating to its Technology Products. The U.S. patents expire from 2010 through 2026 and the Company’s existing foreign patent rights expire from 2008 through 2027. In addition, the Company holds perpetual licenses to more than 35 other U.S. patents including rights to practice 6 patents for non-forest product related applications that were assigned to USNR in conjunction with the sale of the Forest Products business unit in 2002. The expiration dates for these licensed patents range from 2008 to 2020.

The Company has registered, and continues to register, various trade names and trademarks including Perceptron^®, AutoGauge^®, IPNet^®, AutoFit^®, AutoGuide^®, AutoScan^®, AutoSolve^®, Contour Probe^®, ScanWorks^®, TriCam^®, WheelWorks^®, Visual Fixturing^®, LASAR^® and Optical Snake^TM, among others, which are used in connection with the conduct of its business.

Perceptron’s products include hardware (camera, lens, etc.) for scanning an image and imbedded software (extraction software algorithms) to convey the results of the scan to the customer. The hardware and software operate and are sold as one product. Perceptron generally does not market its software algorithms as a separate item distinct from the scanning product. The Company’s software products are copyrighted and generally licensed to customers pursuant to license agreements that restrict the use of the products to the customer’s own internal purposes on designated Perceptron equipment. The licensing language conveys the proprietary nature of the Company’s product.

The Company also uses non-disclosure agreements with employees, consultants and other parties.

There can be no assurance that any of the above measures will be adequate to protect the Company’s intellectual property or other proprietary rights. Effective patent, trademark, copyright and trade secret protection may be unavailable in certain foreign countries.

In the past, the Company had been informed that certain of its customers had received allegations of possible patent infringement involving processes and methods used in the Company’s products. Certain of these customers, including customers who were parties to patent infringement suits relating to this matter, settled such claims. Management believes that the processes used in the Company’s products were independently developed without utilizing any previously patented process or technology.

In August 2003, the Company ceased the manufacture of LASAR^® sensors and, as required by the terms of the Sensor Supply Agreement, the Company granted a non-exclusive, perpetual worldwide license to USNR to manufacture LASAR^® sensors primarily intended for sale to operators of wood processing facilities (e.g., sawmills, planer mills, panel mills, etc.).

Employees

As of June 30, 2008, the Company employed 252 persons. None of the employees is covered by a collective bargaining agreement and the Company believes its relations with its employees to be good.

Available Information

The Company’s Internet address iswww.perceptron.com. There the Company makes available, free of charge, its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports, filed or furnished after the date of this Form 10-K, as soon as reasonably practicable after the Company electronically files such material with, or furnishes it to, the Securities and Exchange Commission (“SEC”). These reports can be accessed through the Company section of the website. The information found on the Company’s website is not part of this or any report the Company files with, or furnishes to, the SEC.

ITEM 1A: RISK FACTORS

An investment in our Common Stock involves numerous risks and uncertainties. You should carefully consider the following information about these risks. Any of the risks described below could result in a significant or material adverse effect on our future results of operations, cash flows or financial condition. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently deem immaterial, also may become important factors that adversely affect our business in the future. We believe that the most significant of the risks and uncertainties we face are as follows:

Our revenues are principally derived from the sale of products for use in the global automotive market, particularly by manufacturers based in the United States and Western Europe. These manufacturers have experienced periodic downturns in their businesses that could adversely affect their level of purchases of our products.

Our revenues are principally derived from the sale of products for use in the automotive industry, particularly to manufacturers based in the United States and Western Europe. As a result, our ability to sell our systems and solutions to automotive manufacturers and suppliers is affected by periodic downturns in the global automotive industry.

New vehicle tooling programs are the most important selling opportunity for our automotive related sales. The number and timing of new vehicle tooling programs can be influenced by a number of economic factors. Our customers only launch a limited number of new car programs in any given year because of the time and financial resources required. From a macro perspective we continue to assess the global economy and its likely effect on our automotive customers and markets served. We continue to view the automotive industry’s focus on introducing new vehicles more frequently to satisfy their customers’ changing requirements, as well as their continuing focus on improved quality, as positive indicators for new business. However, because of periodic economic downturns experienced by our customers, our customers could determine to reduce their number of new car programs. We are experiencing continued pricing pressures from our customers, particularly our automotive customers. These pricing pressures could adversely affect the margins we realize on the sale of our products and, ultimately, our profitability.

Our future success is dependent upon our ability to implement our long-term growth strategy.

We realize that we are vulnerable to fluctuations in the global automotive industry. Our future success is dependent upon our ability to implement our long-term strategy to expand our customer base in our automotive markets and to expand into new markets. Currently, we are focusing on our plans to achieve sales growth in automotive markets through expansion in largely untapped geographic sales areas, including automotive markets in Asia and Eastern Europe and the expansion of our business with current customers in Japan. We also continue to explore opportunities for expansion into non-automotive markets through our existing and new Technology Products, including our new commercial products. However, there are a number of uncertainties involved in our long-term strategy over which we have no or limited control, including:

	•		The quality and cost of competitive products already in existence or developed in the future.

	•		The level of interest existing and potential new customers may have in our existing and new products and technologies.

	•		Our ability to resolve technical issues inherent in the development of new products and technologies.

	•		Our ability to identify and satisfy market needs.

	•		Our ability to identify satisfactory distribution networks.

	•		General product development and commercialization difficulties.

	•		Rapid or unexpected technological changes.

	•		General product demand and market acceptance risks.

	•		Our ability to successfully compete with alternative and similar technologies.

	•		Our ability to attract the appropriate personnel to effectively represent, install and service our products.

	•		The effect of economic conditions.

Even if we are able to expand our customer base and markets, the new revenues we derive may not offset declines in revenues from our current products, especially our AutoGauge^® products. We also may not be able to generate profits from these new customers or markets at the same level as we generate from our current business. There can be no assurance that we will be able to expand our customer base and markets or successfully execute our strategies in a fashion to maintain or increase our revenues and profits.

We have recently introduced a series of new products for sale in new markets. We could experience unanticipated difficulties in bringing these products to market that would adversely affect our financial results of operation and divert the attention of our management.

Beginning at the end of fiscal year 2007, the Company has introduced a series of commercial products for wholesale and retail distribution that are manufactured in China through subcontractors. As a result, we could experience unforeseen difficulties including:

	•		Product quality problems and costs to correct those problems resulting from design or manufacturing defects.

	•		Warranty claims at greater levels than anticipated.

	•		Product orders at significantly greater volumes than our subcontractors’ current manufacturing capabilities.

	•		The speed at which competitors’ products may be brought to market.

	•		The need and cost to revise our product offerings to respond to competitors’ product introductions or unanticipated consumer preferences or negative reactions to our products.

Handling such unforeseen difficulties could require significant management time and could adversely affect our operating results.

Since we are distributing these new products through a limited number of third party wholesale distributors, including pursuant to exclusive agreement for certain of the products, the level of revenues we derive from these products will be dependent on the success of these third parties in advertising, promoting and selling the products through their distribution channels. In addition, competitive products exist in these markets and new product offerings are being developed for these markets. The level of spending by our competitors in advertising, promoting and selling their products could exceed the levels spent by our distributors and could adversely impact sales of our products.

If our distributors ceased selling our products, we would have to find alternative wholesale purchasers or distributors for our products, which could substantially reduce, at least in the short-term, the revenues and profits anticipated to be derived by us from the products.

A significant percentage of our revenues are derived from a small number of customers concentrated in the automotive industry, so that the loss of any one of these customers could result in a reduction in our revenues and profits.

A majority of our revenues are derived from the sale of systems and solutions to a small number of customers that consist primarily of automotive manufacturers and suppliers in North America and Western Europe.

With such a large percentage of our revenues coming from such a small and highly concentrated group of customers, we are susceptible to a substantial risk of losing revenues if these customers stop purchasing our products or reduce their purchases of our products. In addition, we have no control over whether these customers will continue to purchase our systems and solutions in volumes or at prices sufficient to generate profits for us.

Our future commercial success depends upon our ability to maintain a competitive technological position in our markets, which are characterized by continual technological change.

Technology plays a key role in the systems and solutions that we produce. Our ability to sell our products to customers is directly influenced by the technology used in our systems and solutions. With the rapid pace at which technology is changing, there is a possibility that our customers may require more technologically advanced systems and solutions than what we may be capable of producing.

Technological developments could render actual and proposed products or technologies of ours uneconomical or obsolete.

There also is a possibility that we may not be able to keep pace with our competitors’ products. In that case, our competitors may make technological improvements to their products that make them more desirable than our products.

Our near-term focus for growth has been and will be on the successful introduction of new commercial products, and the continued development of enhanced versions of our ScanWorks^® and AutoGauge^® product lines.

Our growth and future financial performance depend upon our ability to introduce new products and enhance existing products that include the latest technological advances and customer requirements. We may not be able to introduce new products successfully or achieve market acceptance for such products. Any failure by us to anticipate or respond adequately to changes in technology and customer preferences, or any significant delays in product development or introduction, could have a material adverse effect on our business. Accordingly, we believe that our future commercial success will depend upon our ability to develop and introduce new cost-effective products and maintain a competitive technological position.

We are dependent on proprietary technology. If our competitors develop competing products that do not violate our intellectual property rights or successfully challenge those rights, our revenues and profits may be adversely affected.

Our products contain features that are protected by patents, trademarks, trade secrets, copyrights, and contractual rights.

Despite these protections, there is still a chance that competitors may use these protected features in their products as a result of our inability to keep our trade secrets confidential, or in violation of our intellectual property rights or following a successful challenge to those rights. The prosecution of infringement claims against third parties and the defense of legal actions challenging our intellectual property rights could be costly and require significant attention from management. Because of the small size of our management team, this could result in the diversion of management’s attention from day-to-day operations.

There also is a chance that competitors may develop technology that performs the same functions as our products without infringing upon our exclusive rights. It is possible that competitors may “reverse engineer” those features of our products that are not protected by patents, trademarks and trade secrets. If a competitor is able to “reverse engineer” an unprotected feature successfully, the competitor may gain an understanding of how the feature works and introduce similar products to compete with our products.

Because our new commercial products will be manufactured in China, we are at risk of competitors misappropriating our intellectual property included in those products or reverse engineering those products. As a result, we may have a more limited ability, and significantly greater costs, to enforce our intellectual property rights in those products. Constant technological improvement of those products will be particularly important to keep the products competitive in their markets.

We could become involved in costly litigation alleging patent infringement.

In the past, we had been informed that certain of our customers have received allegations of possible patent infringement involving processes and methods used in our products. Certain of these customers, including one customer who was a party to a patent infringement suit relating to this matter, settled such claims. We believe that the processes used in our products were independently developed without utilizing any previous patented process or technology. However, it is possible that in the future we or our customers could receive allegations of possible patent infringement or could be parties to patent infringement litigation relating to our products.

The defense of patent infringement litigation could be costly and require significant attention from management. Because of the small size of our management team, this could result in the diversion of management’s attention from day-to-day operations.

A number of new competitors have recently entered our markets, or are developing products to compete with our products, which could result in a reduction in our revenues through lost sales or a reduction in prices.

We are aware of a number of companies that have recently entered a number of our markets selling products using similar or alternative technologies and methods. We believe that there may be other companies, some of whom may be substantially larger and have substantially greater resources than us, which may be engaged in the development of technology and products for some of our markets that could prove to be competitive with ours. We believe that the principal competitive factor in our markets is the total capability that a product offers as a process control system. In some markets, a competitive price for the level of functionality and reliability provided are the principal competitive factors. While we believe that our products compete favorably, it is possible that these new competitors could capture some of our sales opportunities or force us to reduce prices in order to complete the sale.

We believe that certain existing and potential customers may be capable of internally developing their own technology. This could cause a decline in sales of our products to those customers.

Our business depends on our ability to attract and retain key personnel.

Our success depends in large part upon the continued service of our executives and key employees, including those in engineering, technical, sales and marketing positions, as well as our ability to attract such additional employees in the future. At times and in certain geographic markets, competition for the type of highly skilled employees we require can be significant. The loss of key personnel or the inability to attract new qualified key employees could adversely affect our ability to implement our long-term growth strategy and have a material adverse effect on our business.

We may not be able to complete business opportunities and acquisitions and our profits could be negatively affected if we do not successfully operate those that we do complete.

We will evaluate from time to time business opportunities that fit our strategic plans. There can be no assurance that we will identify any opportunities that fit our strategic plans or will be able to enter into agreements with identified business opportunities on terms acceptable to us.

There is also no assurance that we will be able to effectively integrate businesses that we may acquire due to the significant challenges in consolidating functions and integrating procedures, personnel, product lines, technologies and operations in a timely and efficient manner. The integration process may require significant attention from management

and devotion of resources. Because of the small size of our management team, this could result in the diversion of management’s attention from day to day operations and impair our relationships with current employees and customers.

We intend to finance any such business opportunities from available cash on hand, existing credit facilities, issuance of additional stock or additional sources of financing, as circumstances warrant. The issuance of additional equity securities could be substantially dilutive to our stockholders. In addition, our profitability may suffer because of acquisition-related costs, debt service requirements or amortization costs for acquired intangible assets. If we are not successful in generating additional profits from these transactions, this dilution and these additional costs could cause our common stock price to drop.

We are expanding our foreign operations, increasing the possibility that our business could be adversely affected by risks of doing business in foreign countries.

We have significant operations outside of the United States and are currently implementing a strategy to expand our operations outside of the United States, especially in Eastern Europe and Asia.

Our foreign operations are subject to risks customarily encountered in such foreign operations. For instance, we may encounter fluctuations in foreign currency exchange rates, differences in the level of protection available for our intellectual property, the impact of differences in language and local business and social customs on our ability to market and sell our products in these markets, the inability to recruit qualified personnel in a specific country or region and transportation delays from our Chinese subcontractors. In addition, we may be affected by U.S. laws and policies that impact foreign trade and investment. Finally, we may be adversely affected by laws and policies imposed by foreign governments in the countries where we have business operations or sell our products. These laws and policies vary from jurisdiction to jurisdiction.

Because of our significant foreign operations, our revenues and profits can vary significantly as a result of fluctuations in the value of the United States dollar against foreign currencies.

Products that we sell in foreign markets are sometimes priced in currency of the country where the customer is located. To the extent that the dollar fluctuates against these foreign currencies, the prices of our products in U.S. dollars also will fluctuate. As a result, our return on the sale of our products may vary based on these fluctuations. We may use, from time to time, a limited hedging program to minimize the impact of foreign currency fluctuations. These transactions involve the use of forward contracts, typically mature within one year and are designed to hedge anticipated foreign currency transactions. We may use forward exchange contracts to hedge the net assets of certain of our foreign subsidiaries to offset the translation and economic exposures related to our investment in these subsidiaries. There is no guarantee that these hedging transactions will protect against the fluctuations in the value of the dollar. Accordingly, we could experience unanticipated foreign currency gains or losses that could have a material impact on our results of operations.

Because a large portion of our revenues are generated from a limited number of sizeable orders, our revenues and profits may vary widely from quarter to quarter and year to year.

A large portion of our revenues are generated from a limited number of sizeable orders that are placed by a small number of customers. If the timing of these orders is delayed from one quarter to the next, or from one year to the next, we may experience fluctuations in our quarterly and annual revenues and operating results.

The amount of revenues that we earn in any given quarter may vary based in part on the timing of new vehicle programs in the global automotive industry. In contrast, many of our operating expenses are fixed and will not vary from quarter to quarter. As a result, our operating results may vary significantly from quarter to quarter and from year to year.

We could experience losses in connection with sales of our investments.

Our long-term investments currently include auction rate securities for which an auction is held every 28 days to provide holders of the securities with the opportunity to increase (buy), decrease (sell) or hold their investment. As a result of the negative conditions in the global credit markets, auctions for the $6.3 million we have invested in these securities have continuously failed since August 2007. In the event we needed to access the funds invested in these auction rate securities, we would not be able to liquidate these securities until a future auction is successful or a buyer is found outside the auction process. We may experience losses on any such sales outside of the auction process. In addition, in fiscal 2008, we recorded a $2.6 million other-than-temporary non-cash decline in the market value of one of these investments in our income statement and a $582,000 temporary non-cash decline in the same and other such investments in other comprehensive income in our balance sheet and reclassified these as long-term investments. In the event that the auctions for these securities continue to fail, we may have to record additional impairment charges relating to these securities, which would negatively impact our stockholders’ equity and net income. See Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations-Liquidity and Capital Resources.”

The trading price of our stock has been volatile.

The following factors may affect the market price of our Common Stock, which can vary widely over time:

	•		announcements of new products by us;

	•		announcements of new products by our competitors;

	•		variations in our operating results;

	•		market conditions in the electronic and sensing industry;

	•		market conditions and stock prices in general; and

	•		the volume of our Common Stock traded.

Because of the limited trading in our Common Stock, it may be difficult for shareholders to dispose of a large number of shares of our Common Stock in a short period of time or at then current prices.

Because of the limited number of shares of our Common Stock outstanding and the limited number of holders of our Common Stock, only a limited number of shares of our Common Stock trade on a daily basis. This limited trading in our Common Stock makes it difficult to dispose of a large number of shares in a short period of time. In addition, it is likely that the sale by a shareholder of a large number of shares of our Common Stock over an extended period would depress the price of our Common Stock.

We do not plan on paying dividends and are restricted under our loan agreement from paying dividends.

Our Board of Directors does not intend to declare or pay cash dividends on our Common Stock. Instead, the Board intends to retain future earnings to finance the development of our business. Furthermore, cash dividends are not permitted under our bank credit agreement.

As permitted under Michigan law, our directors are not liable to Perceptron for monetary damages resulting from their actions or inactions.

Under our articles of incorporation, as permitted under the Michigan Business Corporation Act, members of our Board of Directors are not liable for monetary damages for any negligent or grossly negligent action that the director takes, or for any negligent or grossly negligent failure of a director to take any action. However, a director will remain liable for:

	•		intentionally inflicting harm on Perceptron or its shareholders;

	•		distributions that the director makes in violation of the Michigan Business Corporation Act; and

	•		intentional criminal acts that the director commits.

However, we or our shareholders may seek an injunction, or other appropriate equitable relief, against a director. Finally, liability may be imposed against members of the Board of Directors under the federal securities laws.

We are required to indemnify our officers and directors if they are involved in litigation as a result of their serving as officers or directors of Perceptron, which could reduce our profits and cash available to operate our business.

Our by-laws require us to indemnify our officers and directors. We may be required to pay judgments, fines, and expenses incurred by an officer or director, including reasonable attorneys’ fees, as a result of actions or proceedings in which such officers or directors are involved by reason of being or having been an officer or director of Perceptron. Funds paid in satisfaction of judgments, fines and expenses would reduce our profits and may be funds we need for the operation of our business and the development of products. This could cause our stock price to drop.

Our profits will be reduced as a result of our compliance with new SEC rules relating to our internal control over financial reporting.

Beginning with our annual report on Form 10-K for the fiscal year ending June 30, 2008, we are required by SEC rules to include a report of management on Perceptron’s internal control over financial reporting in our annual reports. In addition, our independent registered public accounting firm auditing our financial statements is required to provide an attestation report on our internal control.

In fiscal year 2008, we expended significant resources in developing the necessary documentation and testing procedures required by these new rules, which adversely affect our profitability. See Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Results of Operations”. We expect to expend significant resources in future fiscal years in connection with ongoing compliance with these requirements, which could adversely affect our profitability.

If management is not able to provide a positive report on our internal control over financial reporting, and our independent registered public accounting firm is not able to provide an unqualified opinion regarding our internal control over financial reporting, shareholders and others may lose confidence in our financial statements, which could cause our stock price to drop.

Because of our relatively small size, we have a limited number of personnel in our finance department to handle their existing responsibilities, as well as compliance with the SEC’s new rules relating to our internal control over financial reporting.

In fiscal year 2008, management provided a positive report on our internal control over financial reporting and we received an unqualified opinion from our independent registered public accounting firm regarding our internal control over financial reporting. However, there can be no positive assurance that , in the future, management will provide a positive report on our internal control over financial reporting or that we will receive an unqualified opinion from our independent registered public accounting firm regarding our internal control over financial reporting. In the event we identify significant deficiencies or material weaknesses in our internal control that we cannot remediate in a timely manner, investors and others may lose confidence in the reliability of our financial statements. This could cause our stock price to drop.

If the subcontractors we rely on for component parts or products delay deliveries or fail to deliver parts or products meeting our requirements, we may not be able to deliver products to our customers in a timely fashion and our revenues and profits could be reduced.

We rely on subcontractors for certain components of our products, including outside subcontracting assembly houses to produce the circuit boards that we use in our products. Our new commercial products are manufactured by several subcontractors located in China. As a result, we have limited control over the quality and the delivery schedules of components or products purchased from third parties. In addition, we purchase a number of component parts from single source suppliers. If our supplies of component parts or products meeting our requirements are significantly delayed or interrupted, we may not be able to deliver products to our customers in a timely fashion. This could result in a reduction in revenues and profits for these periods. The termination of or material change in the purchase terms of any single source supplier could have a similar impact on us. It is also possible, if our delay in delivering products to our customer is too long, the customer could cancel its order, resulting in a permanent loss of revenue and profit from that sale. From time to time, we have experienced significant delays in the receipt of certain components, most recently for our ScanWorks^® systems.

Finally, although we believe that alternative suppliers are available, difficulties or delays may arise if we shift manufacturing capacity to new suppliers.

The Board of Directors has the right to issue up to 1,000,000 shares of preferred stock without further action by shareholders. The issuance of those shares could cause the market price of our Common Stock to drop significantly and could be used to prevent or frustrate shareholders’ attempts to replace or remove current management.

Although no preferred stock currently is outstanding, we are authorized to issue up to 1,000,000 shares of preferred stock. Preferred stock may be issued in one or more series, the terms of which may be determined at the time of issuance by the Board of Directors, without further action by shareholders, and may include voting rights (including the right to vote as a series on particular matters), the dividends payable thereon, liquidation payments, preferences as to dividends and liquidation, conversion rights and redemption rights. In the event that preferred stock is issued, the rights of the common stockholders may be adversely affected. This could result in a reduction in the value of our Common Stock.

The preferred stock could be issued to discourage, delay or prevent a change in control of Perceptron. This may be beneficial to our management or Board of Directors in a hostile tender offer or other takeover attempt and may have an adverse impact on shareholders who may want to participate in the tender offer or who favor the takeover attempt.

Our common stock rights plan could be used to discourage hostile tender offers.

We maintain a common stock rights plan. Under the plan, if any person acquires 15% or more of our outstanding Common Stock, our shareholders, other than the acquirer, will have the right to purchase shares of our Common Stock at half their market price. The common stock rights plan discourages potential acquirers from initiating tender offers for our Common Stock without the approval of the Board of Directors. This may be beneficial to our management or Board of Directors in a hostile tender offer or other takeover attempt and may have an adverse impact on shareholders who may want to participate in the tender offer or who favor the takeover attempt.

ITEM 1B: UNRESOLVED STAFF COMMENTS

Not applicable.

ITEM 2: PROPERTIES

Perceptron’s principal domestic facilities consist of a 70,000 square foot building located in Plymouth, Michigan, owned by the Company. In addition, the Company leases a 1,500 square meter facility in Munich, Germany and leases office space in Voisins le Bretonneux, France; Sao Paulo, Brazil; Tokyo, Japan; Singapore; and Shanghai, China. The Company believes that its current facilities are sufficient to accommodate its requirements through fiscal year 2009.

ITEM 3: LEGAL PROCEEDINGS

The Company is a party to a suit filed by Industries GDS, Inc., Bois Granval GDS Inc., and Centre de Preparation GDS, Inc. (collectively, “GDS”) on or about November 21, 2002 in the Superior Court of the Judicial District of Quebec, Canada against the Company, Carbotech, Inc. (“Carbotech”), and U.S. Natural Resources, Inc. (“USNR”), among others. The suit alleges that the Company breached its contractual and warranty obligations as a manufacturer in connection with the sale and installation of three systems for trimming and edging wood products. The suit also alleges that Carbotech breached its contractual obligations in connection with the sale of equipment and the installation of two trimmer lines, of which the Company’s systems were a part, and that USNR, which acquired substantially all of the assets of the Forest Products business unit from the Company, was liable for GDS’ damages. USNR has sought indemnification from the Company under the terms of existing contracts between the Company and USNR. GDS seeks compensatory damages against the Company, Carbotech and USNR of approximately $6.6 million using a June 30, 2008 exchange rate. GDS and Carbotech have filed for bankruptcy protection in Canada. The Company intends to vigorously defend GDS’ claims.

See Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies — Litigation and Other Contingencies” for a discussion of the Company’s accounting policies regarding legal proceedings and other contingencies.

ITEM 4: SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

No matters were submitted to a vote of security holders during the fourth quarter of fiscal 2008.

PART II


ITEM 5:		MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Perceptron’s Common Stock is traded on The NASDAQ Stock Market’s Global Market under the symbol “PRCP”. The following table shows the reported high and low sales prices of Perceptron’s Common Stock for fiscal 2008 and 2007:


	Prices
	Low		High
Fiscal 2008
Quarter through September 30, 2007	$	8.42	$	14.53
Quarter through December 31, 2007	$	10.02	$	16.08
Quarter through March 31, 2008	$	8.65	$	13.00
Quarter through June 30, 2008	$	8.04	$	13.34

Fiscal 2007
Quarter through September 30, 2006	$	7.35	$	9.00
Quarter through December 31, 2006	$	7.87	$	9.44
Quarter through March 31, 2007	$	8.12	$	10.04
Quarter through June 30, 2007	$	8.15	$	10.08

No cash dividends or distribution on Perceptron’s Common Stock have been paid in the past and it is not anticipated that any will be paid in the foreseeable future. In addition, the payment of cash dividends or other distributions is prohibited under the terms of Perceptron’s revolving credit agreement with its bank. See Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Liquidity and Capital Resources”, for a discussion of other restrictions on the payment of dividends.

The approximate number of shareholders of record on September 08, 2008, was 179.

The information pertaining to the securities the Company has authorized for issuance under equity plans is hereby incorporated by reference to Item 12, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters — Equity Compensation Plan Information”. For more information about the Company’s equity compensation plans, see Note 9 of Notes to the Consolidated Financial Statements, Stock Based Compensation”, included in Item 8 of this report.

STOCK PRICE PERFORMANCE GRAPH

Set forth below is a graph comparing the cumulative total shareholder return on the Common Stock from June 30, 2007 through June 30, 2008 with (i) an index consisting of returns from a peer group of companies, consisting of Camtek Ltd., Cognex Corp., Cyberoptics Corporation, KLA-Tencor Corporation and MKS Instruments, Inc. (the “New Peer Group Index”), (ii) an index of returns from last year’s peer group of companies, consisting of Cognex Corp., Cyberoptics Corporation, Integral Vision, Inc., PPT Vision, Inc. and Robotic Vision Systems, Inc. (the “Old Peer Group Index”, and (iii) The Nasdaq Stock Market (U.S.) Index (the “Nasdaq US Index”). Integral vision, PPT Vision and Robotic Vision have been removed from the peer group index because they are either no longer traded, are in the process of delisting their shares or trade infrequently. The returns of each company in the New Peer Group Index and Old Peer Group Index have been weighted according to their respective stock market capitalization. The graph assumes that the value of the investment in the Company’s Common Stock, the New Peer Group Index, the Old Peer Group Index and the Nasdaq U.S. Index was $100 on June 30, 2003 and that all dividends were reinvested.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among Perceptron, Inc., The Nasdaq U.S. Index,
a New Peer Group and an Old Peer Group

* $100 invested on 6/30/03 in stock or index-including reinvestment of dividends.


	CUMULATIVE TOTAL RETURN
	6/30/03		6/30/04		6/30/05		6/30/06		6/30/07		6/30/08
Perceptron, Inc.		100		119		113		135		165		146
Nasdaq Stock Market (US)		100		126		127		135		162		141
New Peer Group		100		116		97		96		122		94
Old Peer Group		100		185		120		119		105		105

The graph displayed above is presented in accordance with applicable legal requirements. Shareholders are cautioned against drawing any conclusions from the data contained in the graph, as past results are not necessarily indicative of future performance. The graph in no way reflects the Company’s forecast of future financial performance.

ITEM 6: SELECTED FINANCIAL DATA

The selected statement of operations and balance sheet data presented below are derived from the Company’s consolidated financial statements and should be read in conjunction with the Company’s consolidated financial statements and notes thereto and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in this report.

PERCEPTRON, INC. AND SUBSIDIARIES
(In thousands, except per share amounts)


	Fiscal Years Ended
	June 30,
Statement of Operations Data:¹	2008		2007		2006		2005		2004

Net sales	$	72,512	$	62,252	$	57,875	$	54,892	$	53,393
Gross profit		30,501		27,000		27,287		25,907		25,100
Operating income		1,980		1,853		4,368		4,695		5,630
Income before income taxes		734		2,746		4,927		5,186		6,653
Net income		995		1,459		3,239		3,282		3,987

Earnings per share:
Basic	$	0.12	$	0.18	$	0.38	$	0.37	$	0.46
Diluted	$	0.11	$	0.17	$	0.35	$	0.35	$	0.43

Weighted average common shares outstanding:
Basic		8,490		8,114		8,582		8,766		8,593
Diluted		8,982		8,761		9,200		9,437		9,327


	As of June 30,
Balance Sheet Data:	2008		2007		2006		2005		2004

Working capital	$	45,233	$	42,364	$	42,652	$	41,100	$	36,777
Total assets		75,193		66,221		63,160		63,390		62,924
Shareholders’ equity		59,859		53,805		54,230		53,922		50,360


¹		No cash dividends have been declared or paid during the periods presented.


ITEM 7:		MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

SAFE HARBOR STATEMENT

We make statements in this Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 2 to the Consolidated Financial Statements that may be “forward-looking statements” within the meaning of the Securities Exchange Act of 1934, including the Company’s expectation as to its fiscal year 2009 and future new order bookings, revenue, expenses, net income and backlog levels, trends affecting its future revenue levels, the rate of new orders, the timing of revenue and net income increases from new products which we have recently released or have not yet released and from our plans to make important new investments, largely for personnel, for newly introduced products and geographic growth opportunities in the U.S., Europe, Eastern Europe, Asia, the timing of the introduction of new products and our ability to fund our fiscal year 2009 and future cash flow requirements. We may also make forward-looking statements in our press releases or other public or shareholder communications. When we use words such as “will,” “should,” “believes,” “expects,” “anticipates,” “estimates” or similar expressions, we are making forward-looking statements. We claim the protection of the safe harbor for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995 for all of our forward-looking statements. While we believe that our forward-looking statements are reasonable, you should not place undue reliance on any such forward-looking statements, which speak only as of the date made. Because these forward-looking statements are based on estimates and assumptions that are subject to significant business, economic and competitive uncertainties, many of which are beyond our control or are subject to change, actual results could be materially different. Factors that might cause such a difference include, without limitation, the risks and uncertainties discussed from time to time in our reports filed with the Securities and Exchange Commission, including those listed in “Item 1A — Risk Factors” in this report. Other factors not currently anticipated by management may also materially and adversely affect our financial condition, liquidity or results of operations. Except as required by applicable law, we do not undertake, and expressly disclaim, any obligation to publicly update or alter our statements whether as a result of new information, events or circumstances occurring after the date of this report or otherwise. The Company’s expectations regarding future bookings and revenues are projections developed by the Company based upon information from a number of sources, including, but not limited to, customer data and discussions. These projections are subject to change based upon a wide variety of factors, a number of which are discussed above. Certain of these new orders have been delayed in the past and could be delayed in the future. Because the Company’s Automated Systems segment products are typically integrated into larger systems or lines, the timing of new orders is dependent on the timing of completion of the overall system or line. In addition, because the Company’s Automated Systems segment products have shorter lead times than other components and are required later in the process, orders for the Company’s Automated Systems segment products tend to be given later in the integration process. The Company’s Technology Products segment products are subject to the timing of firm orders from its customers, which may change on a monthly basis. In addition, because the Company’s Technology Products segment products require short lead times from firm order to delivery, the Company purchases long lead time components before firm orders are in hand. A significant portion of the Company’s projected revenues and net income depends upon the Company’s ability to successfully develop and introduce new products and expand into new geographic markets. Because a significant portion of the Company’s revenues are denominated in foreign currencies and are translated for financial reporting purposes into U.S. Dollars, the level of the Company’s reported net sales, operating profits and net income are affected by changes in currency exchange rates, principally between U.S. Dollars and Euros. Currency exchange rates are subject to significant fluctuations, due to a number of factors beyond the control of the Company, including general economic conditions in the United States and other countries. Because the Company’s expectations regarding future revenues, order bookings, backlog and operating results are based upon assumptions as to the levels of such currency exchange rates, actual results could differ materially from the Company’s expectations.

Overview

Perceptron, Inc. (“Perceptron” or the “Company”) develops, produces and markets non-contact metrology solutions for manufacturing process control as well as sensor and software technologies for non-contact measurement and inspection applications. Perceptron’s product offerings are designed to improve quality, increase productivity and decrease costs in manufacturing and product development. Perceptron also produces innovative technology solutions for scanning and inspection, serving industrial, trade and consumer applications. The solutions offered by the Company are divided into two groups: 1) The Automated Systems Group made up of AutoGaugeâ, AutoFitâ, AutoScanâ, and AutoGuideâ products and training, consulting and non-warranty support services; and 2) The Technology Products Group made up of ScanWorksâ, Non-Contact Wheel Alignment (“WheelWorksâ”), TriCamâ sensors for the forest products industry, and commercial products. The Company services multiple markets, with the largest being the automotive industry. The Company’s primary operations are in North America, Europe and Asia.

In fiscal year 2008, the Company’s Technology Products segment grew 67% primarily due to a full year of sales of the Company’s commercial product sold by Ridge Tool under the name SeeSnakeâ microÔ. In the fourth quarter of fiscal year 2008, the Company began shipping a new commercial product sold by Snap-on under the BK5500 name which has

had excellent market acceptance. The Company also began shipping two new commercial products in the first quarter of fiscal 2009. Both are sold by Ridge Tool. One is an upgraded version of the SeeSnakeâ microÔ that features a sub 10 millimeter imager head and the other is sold under the name microExplorer™ Digital Inspection Camera, which utilizes significantly more advanced and sophisticated technology than the SeeSnakeâ microÔ. The Company expects sales from its Technology Products segment to continue to grow in fiscal 2009 in large part due to growth in commercial products sales.

Fiscal 2008 was a difficult year for the Company’s Automated Systems segment as a result of the turbulent economic conditions in the automotive market in North America and Europe. New vehicle tooling programs represent the most important selling opportunity for the Company’s automotive related sales. The number and timing of new vehicle tooling programs varies in accordance with individual automotive manufacturers’ plans and is also influenced by the state of the economy. Although the Company expects the turbulent economic conditions in the North American and European automotive markets to continue in fiscal year 2009, the Company believes there are opportunities as the automobile manufacturers transition to production of new models that are more fuel efficient. The Company’s earlier investments in Asia began to show tangible results in fiscal 2008 and continue to represent an important opportunity for sales growth. As a result, the Company plans to expand into India and add additional resources in Asia during fiscal 2009. The Company expects its sales of Automated Systems products in fiscal 2009 in North America and Europe to be below fiscal 2008 levels, but be offset by growth in Automated Systems products in Asia.

The Company continues to be in a strong financial position with no debt and approximately $22.2 million of cash at June 30, 2008 compared to $10.9 million of cash at June 30, 2007. Net income for fiscal 2008 was $995,000 compared to $1.5 million in fiscal 2007. There were several factors that increased costs in fiscal 2008 that the Company does not expect to continue or to continue at the same level in fiscal 2009. During the second quarter of fiscal 2008, the Company recorded a $2.6 million unrealized impairment charge related to one of its investments in an auction rate security. During the third quarter of fiscal 2008, the Company incurred costs of approximately $600,000 related to the retirement of the President of the Company. During fiscal 2008, the Company incurred approximately $700,000 for professional fees related to complying with the requirements of Section 404 of the Sarbanes Oxley Act which are expected to be significantly lower in fiscal 2009. Favorably affecting the fiscal 2008 results in the fourth quarter was a $619,000 tax benefit related to the reduction of a portion of the Company’s tax valuation reserve related to tax credits that the Company now believes is more likely than not to be realized based on the continued and expected future taxable income of the Company.

Results of Operations

Fiscal Year Ended June 30, 2008, Compared to Fiscal Year Ended June 30, 2007

Overview — The Company reported net income of $995,000 or $0.11 per diluted share, for the fiscal year ended June 30, 2008 compared with net income of $1.5 million, or $0.17 per diluted share, for the fiscal year ended June 30, 2007. Specific line item results are described below.

Sales — Net sales of $72.5 million for fiscal 2008 were up $10.2 million, or 16.4%, compared with the same period one year ago. The following tables set forth comparison data for the Company’s net sales by segment and geographic location.


Sales (by segment)
(in millions)	2008				2007				Increase/(Decrease)
Automated Systems	$	39.1	53.9	%	$	42.3	67.9	%	$	(3.2	)	(7.6	)%
Technology Products		33.4	46.1	%		20.0	32.1	%		13.4		67.0	%

Totals	$	72.5	100.0	%	$	62.3	100.0	%	$	10.2		16.4	%


Sales (by location)
(in millions)	2008				2007				Increase/(Decrease)
Americas	$	43.3	59.7	%	$	33.1	53.1	%	$	10.2		30.8	%
Europe		24.2	33.4	%		26.8	43.0	%		(2.6	)	(9.7	)%
Asia		5.0	6.9	%		2.4	3.9	%		2.6		108.3	%

Totals	$	72.5	100.0	%	$	62.3	100.0	%	$	10.2		16.4	%

The decrease in fiscal 2008 Automated Systems sales compared to fiscal 2007 was attributable to the turbulent economic conditions in the automotive markets in the Americas and Europe, partially offset by increased sales in Asia. During fiscal 2008, significantly higher gas prices and the generally stagnant U.S. economy caused car companies to

lose sales which prompted additional cutbacks in capital spending and new vehicle tooling programs, plant closings, etc. The manufacturers are now planning to shift production to new and fuel efficient models, which represent a future opportunity for the Company. The sales increase in Asia was primarily in the Automated Systems segment. Mitigating the decrease in European sales was the strength of the Euro which had the effect of increasing sales by $2.9 million over fiscal 2007. Technology Products’ sales growth was primarily due to sales of the Company’s new commercial product and was the primary reason for the increase in sales in the Americas. ScanWorks^® and Non-Contact Wheel Alignment also showed increased sales over fiscal 2007.

Bookings — Bookings represent new orders received from customers. During fiscal 2008 the Company had new order bookings of $75.0 million compared with new order bookings of $66.4 million during fiscal 2007. The amount of new order bookings during any particular period is not necessarily indicative of the future operating performance of the Company. The following tables set forth comparison data for the Company’s bookings by segment and geographic location.


Bookings (by segment)
(in millions)	2008				2007				Increase/(Decrease)
Automated Systems	$	43.4	57.9	%	$	38.6	58.1	%	$	4.8	12.4	%
Technology Products		31.6	42.1	%		27.8	41.9	%		3.8	13.7	%

Totals	$	75.0	100.0	%	$	66.4	100.0	%	$	8.6	13.0	%


Bookings (by location)
(in millions)	2008				2007				Increase/(Decrease)
Americas	$	41.9	55.9	%	$	41.3	62.2	%	$	0.6	1.5	%
Europe		26.5	35.3	%		22.7	34.2	%		3.8	16.7	%
Asia		6.6	8.8	%		2.4	3.6	%		4.2	175.0	%

Totals	$	75.0	100.0	%	$	66.4	100.0	%	$	8.6	13.0	%

Bookings in Automated Systems were up primarily due to increased bookings in Europe and Asia. Increased Technology Products bookings occurred primarily in the commercial products line and offset the lower Automated Systems bookings in the Americas.

Backlog — Backlog represents orders or bookings received by the Company that have not yet been filled. The Company’s backlog was $25.4 million as of June 30, 2008 compared with $23.0 million as of June 30, 2007. The following tables set forth comparison data for the Company’s backlog by segment and geographic location.


Backlog (by segment)
(in millions)	2008				2007				Increase/(Decrease)
Automated Systems	$	17.4	68.5	%	$	13.2	57.4	%	$	4.2		31.8	%
Technology Products		8.0	31.5	%		9.8	42.6	%		(1.8	)	(18.4	)%

Totals	$	25.4	100.0	%	$	23.0	100.0	%	$	2.4		10.4	%


Backlog (by location)
(in millions)	2008				2007				Increase/(Decrease)
Americas	$	14.9	58.7	%	$	16.4	71.3	%	$	(1.5	)	(9.1	)%
Europe		8.6	33.8	%		6.3	27.4	%		2.3		36.5	%
Asia		1.9	7.5	%		0.3	1.3	%		1.6		533.3	%

Totals	$	25.4	100.0	%	$	23.0	100.0	%	$	2.4		10.4	%

Automated Systems backlog increased in all three geographic locations. The decrease in Technology Products backlog was primarily due to a lower backlog for the Company’s non-contact wheel alignment product. Sales of non-contact wheel alignment increased in fiscal 2008 compared to fiscal 2007, but bookings late in the year were less than one year ago resulting in a lower backlog. The Company expects to be able to fill substantially all of the orders in backlog during the next twelve months. The level of backlog during any particular period is not necessarily indicative of the future operating performance of the Company. Most of the backlog is subject to cancellation by the customer.

Gross Profit — Gross profit was $30.5 million, or 42.1% of sales, in the fiscal year ended June 30, 2008, as compared to $27.0 million, or 43.4% of sales, in the fiscal year ended June 30, 2007. The decline in the gross profit percentage in fiscal 2008 compared to fiscal 2007 was principally due to lower margins in Automated Systems which was principally a function of the lower sales level and the relatively fixed overhead for this business segment. Also contributing to the lower gross profit percentage in fiscal 2008 was the increased sales of the Company’s commercial products, as a percentage of total sales, which generally have lower margins than those in Automated Systems. The favorable effect of the Euro exchange rate mitigated the lower gross profit percentage in fiscal 2008.

Selling, General and Administrative (SG&A) Expenses — SG&A expenses during fiscal 2008 were $19.9 million, compared with $17.3 million during fiscal 2007. Approximately $1.3 million of the increase in 2008 relates to items that the Company believes will not continue or will not continue at the same level in fiscal 2009. During the third quarter of fiscal 2008, the Company incurred costs of approximately $600,000 related to the retirement of the President of the Company that are not expected to repeat in fiscal 2009. During fiscal 2008, the Company incurred approximately $700,000 for professional fees related to complying with the requirements of Section 404 of the Sarbanes Oxley Act relating to internal control over financial reporting, which are expected to be significantly lower in fiscal 2009. Of the remaining $1.3 million of increase, approximately $565,000 related to sales promotions and advertising in technology products, $330,000 in legal and board fees primarily from the change in senior management in the third quarter, and approximately $372,000 for additional personnel and related expenses supporting the Company’s high growth initiatives in Asia and commercial products.

Engineering, Research and Development (R&D) Expenses — Engineering and R&D expenses were $8.6 million for the fiscal year ended June 30, 2008, compared with $7.9 million for fiscal 2007. The increase was primarily due to approximately $975,000 for higher salary, benefits, engineering materials, and travel for Technology Products, principally related to commercial product development. Lower engineering costs related to Automated Systems mitigated this increase.

Interest Income, net — Net interest income was $1,029,000 in fiscal 2008, compared with $958,000 in fiscal 2007. The increase in interest income for fiscal year 2008 compared to fiscal year 2007 was principally due to higher average investment balances during fiscal year 2008.

Foreign Currency Gain Loss — There was a net foreign currency gain of $287,000 in fiscal 2008 compared with a net foreign currency loss of $84,000 in fiscal 2007. The effect in both years was primarily due to the change in foreign exchange rates between the time that the Company’s foreign subsidiaries, principally in Europe and Japan, received material denominated in U.S. dollars and when funds were converted to pay for the material received.

Impairment on Long-Term Investment — In the quarter ended December 31, 2007, the Company determined that one of its investments in auction rate securities had been other-than-temporarily impaired and based on fair values provided by the Company’s broker, recorded a $2.6 million other-than-temporary decline in the market value of this investment. See Note 1 of the Notes to the Consolidated Financial Statements, “Summary of Significant Accounting Policies — Long and Short-Term Investments”.

Income Taxes — The effective income tax rate of (35.6%) for fiscal 2008 compares to 46.9% for fiscal 2007. Income tax for fiscal 2008 included the recognition of a $619,000 tax benefit associated with reversing a valuation allowance related to certain tax credits in North America. The effective tax rate for fiscal 2008 excluding this item was 48.8%. In addition, the Company is not able to record a tax benefit for non-cash stock-based compensation expense related to incentive stock options and the Company’s Employee Stock Purchase Plan, which had the effect of increasing the effective tax rate in fiscal 2008 and 2007 by 6.0% and 4.0%, respectively. The balance of the change in the effective tax rate reflected the effect of the mix of operating profit and loss among the Company’s various operating entities and their respective tax rates. See Note 10 of the Notes to the Consolidated Financial Statements, “Income Taxes”.

Outlook — The Company expects to continue double digit revenue growth in fiscal year 2009 along with a significant increase in operating income principally from growth in Technology Products and Asia. Because Asia continues to represent an important opportunity for sales growth, the Company plans to expand into India and add additional resources in Asia during fiscal 2009. The Company expects sales of its Automated Systems products in North America and Europe in fiscal 2009 to be below fiscal 2008 levels as the turbulent economic conditions in the automotive market continue in fiscal 2009, but will be offset by growth in Automated Systems sales in Asia.

Fiscal Year Ended June 30, 2007, Compared to Fiscal Year Ended June 30, 2006

Overview — The Company reported net income of $1.5 million or $0.17 per diluted share, for the fiscal year ended June 30, 2007 compared with net income of $3.2 million, or $0.35 per diluted share, for the fiscal year ended June 30, 2006. Specific line item results are described below.

Sales — Net sales of $62.3 million for fiscal 2007 were up $4.4 million, or 7.6%, compared with the same period one year ago. The following tables set forth comparison data for the Company’s net sales by product groups and geographic location.


Sales (by segment)
(in millions)	2007				2006				Increase/(Decrease)
Automated Systems	$	42.3	67.9	%	$	47.0	81.2	%	$	(4.7	)	(10.0	)%
Technology Products		20.0	32.1	%		10.9	18.8	%		9.1		83.5	%

Totals	$	62.3	100.0	%	$	57.9	100.0	%	$	4.4		7.6	%


Sales (by location)
(in millions)	2007				2006				Increase/(Decrease)
Americas	$	33.1	53.1	%	$	37.4	64.6	%	$	(4.3	)	(11.5	)%
Europe		26.8	43.0	%		18.9	32.6	%		7.9		41.8	%
Asia		2.4	3.9	%		1.6	2.8	%		0.8		50.0	%

Totals	$	62.3	100.0	%	$	57.9	100.0	%	$	4.4		7.6	%

The decrease in fiscal 2007 Automated Systems sales compared to fiscal 2006 was attributable to North America. The domestic North American auto manufacturers all suffered losses in their North American operations and were engaged in determining how to complete significant downsizing in their headquarters’ personnel, plant personnel, and plant operations. As a result of these restructuring efforts, and as programs were reassessed in response to demand for more fuel efficient models, customers delayed some of their tooling programs and purchases from the Company. As a result, Automated Systems sales in North America were significantly below fiscal 2006 levels. Automated Systems sales in Europe grew by 36% in fiscal 2007 over fiscal 2006, of which 9% related to the strength of the Euro relative to the U.S. dollar. Technology Products’ sales growth occurred in all three regions and in all of its product lines — ScanWorks®, Non-Contact Wheel Alignment (“NCA”), TriCam® sensors for the forest product industry and commercial products. Most of the growth occurred in commercial products which had no sales in fiscal 2006.

Bookings — Bookings represent new orders received from customers. During fiscal 2007 the Company had new order bookings of $66.4 million compared with new order bookings of $58.7 million during fiscal 2006. The amount of new order bookings during any particular period is not necessarily indicative of the future operating performance of the Company. The following tables set forth comparison data for the Company’s bookings by product groups and geographic location.


Bookings (by segment)
(in millions)	2007				2006				Increase/(Decrease)
Automated Systems	$	38.6	58.1	%	$	48.7	83.0	%	$	(10.1	)	(20.7	)%
Technology Products		27.8	41.9	%		10.0	17.0	%		17.8		178.0	%

Totals	$	66.4	100.0	%	$	58.7	100.0	%	$	7.7		13.1	%


Bookings (by location)
(in millions)	2007				2006				Increase/(Decrease)
Americas	$	41.3	62.2	%	$	36.5	62.2	%	$	4.8	13.2	%
Europe		22.7	34.2	%		20.7	35.3	%		2.0	9.7	%
Asia		2.4	3.6	%		1.5	2.5	%		0.9	60.0	%

Totals	$	66.4	100.0	%	$	58.7	100.0	%	$	7.7	13.1	%

Bookings in Automated Systems were down due to the difficulties the domestic North American auto manufacturers experienced in fiscal 2007, as described above. The increase in Technology Products bookings occurred primarily in the commercial products line, with increases in NCA and ScanWorks® as well. North American bookings increased as a result of the increases in Technology Products, partially offset by a decline in Automated Systems due to the weak domestic automotive market.

Backlog — Backlog represents orders or bookings received by the Company that have not yet been filled. The Company’s backlog was $23.0 million as of June 30, 2007 compared with $18.8 million as of June 30, 2006. The following tables set forth comparison data for the Company’s backlog by product groups and geographic location.


Backlog (by segment)
(in millions)	2007				2006				Increase/(Decrease)
Automated Systems	$	13.2	57.4	%	$	17.1	91.0	%	$	(3.9	)	(22.8	)%
Technology Products		9.8	42.6	%		1.7	9.0	%		8.1		476.5	%

Totals	$	23.0	100.0	%	$	18.8	100.0	%	$	4.2		22.3	%


Backlog (by location)
(in millions)	2007				2006				Increase/(Decrease)
Americas	$	16.4	71.3	%	$	8.1	43.1	%	$	8.3		102.5	%
Europe		6.3	27.4	%		10.4	55.3	%		(4.1	)	(39.4	)%
Asia		0.3	1.3	%		0.3	1.6	%		0.0		0.0	%

Totals	$	23.0	100.0	%	$	18.8	100.0	%	$	4.2		22.3	%

The increase in North American and Technology Products backlogs is primarily due to the commercial products line. The level of backlog during any particular period is not necessarily indicative of the future operating performance of the Company.

Gross Profit — Gross profit was $27.0 million, or 43.4% of sales, in the fiscal year ended June 30, 2007, as compared to $27.3 million, or 47.1% of sales, in the fiscal year ended June 30, 2006. Changes in product mix were the primary reason for the change in gross profit as a percent of sales. Commercial products represented the most significant element of the change in the product mix. Gross margin on commercial products was lower than other product lines within Technology Products due to higher manufacturing start-up costs.

Selling, General and Administrative (SG&A) Expenses — SG&A expenses during fiscal 2007 were $17.3 million, compared with $15.2 million during fiscal 2006. The increase was primarily due to: the investment of approximately $1.1 million in additional personnel and related expenses in Asia and in commercial products in order to grow the Asia market and new product line respectively; a $400,000 increase in European SG&A cost due to the strengthening of the Euro against the U.S. dollar; an increase of approximately $230,000 in the cost of outside professional fees for legal and audit services; a net increase of $321,000 in the provision for bad debt; and an approximately $275,000 increase in sales and promotion costs, primarily related to commercial products.

Engineering, Research and Development (R&D) Expenses — Engineering and R&D expenses were $7.9 million for the fiscal year ended June 30, 2007, compared with $7.8 million for fiscal 2006. The increase was primarily due to an increase in salary costs related to the addition of commercial product engineering personnel in fiscal 2007 and an increase in the cost of contract services that was partially offset by a reduction in the cost of engineering materials.

Interest Income, net — Net interest income was $958,000 in fiscal 2007, compared with $722,000 in fiscal 2006. The increase in interest income reflected cash balances invested in short term securities at higher average interest rates during fiscal 2007.

Foreign Currency Gain (Loss) — There was a net foreign currency loss of $84,000 in fiscal 2007 compared with a net foreign currency loss of $21,000 in fiscal 2006. The loss in both years was primarily due to the change in foreign exchange rates between the time that the Company’s foreign subsidiaries, principally in Europe and Japan, received material denominated in U.S. dollars and when funds were converted to pay for the material received.

Other Income and Expense — Other income was $19,000 in fiscal 2007, compared with other expense of $142,000 in fiscal 2006 which reflected the recognition of a $311,000 foreign currency translation adjustment related to closing Perceptron Canada, Inc. that was partially offset by the market value of $160,000 of stock received by the Company when a mutual life insurance company was demutualized.

Income Taxes — The effective income tax rate of 46.9% for fiscal 2007 compares to 34.3% in fiscal 2006. Income tax for fiscal 2006 included the recognition of a $725,000 tax benefit associated with reversing a valuation allowance related to net operating losses in North America, a $290,000 tax expense related to the repatriation of $6.3 million of unremitted earnings of certain of the Company’s European subsidiaries under the provisions of the American Jobs Creation Act of 2004, and income tax expense of $211,000 related to a tax audit of prior years in the Company’s German operations.

The effective tax rate for fiscal 2006 excluding these items was 38.8%. In addition, the Company is not able to record a tax benefit for non-cash stock-based compensation expense related to incentive stock options and the Company’s Employee Stock Purchase Plan, which had the effect of increasing the effective tax rate in fiscal 2007 and 2006 by 4.0% and 2.0%, respectively. The balance of the change in the effective rate reflected the effect of the mix of operating profit and loss among the Company’s various operating entities and their respective tax rates. See Note 10 of the Notes to the Consolidated Financial Statements, “Income Taxes”.

Liquidity and Capital Resources

The Company’s cash and cash equivalents were $22.2 million at June 30, 2008 compared to $10.9 million at June 30, 2007. The cash increase of $11.3 million for the fiscal year ended June 30, 2008, resulted primarily from $8.4 million from operations, $3.1 million received from stock plans and $1.3 million from the effect of exchange rate changes on cash less capital expenditures of $1.5 million.

The $8.4 million of cash from operations was primarily related to changes in assets and liabilities of $4.5 million, $1.0 million generated from earnings, the add back of non-cash items such as the unrealized loss on investment of $2.6 million, depreciation and amortization expense of $1.4 million and stock compensation expense of $609,000 less non-cash changes in deferred income taxes of $1.2 million and the allowance for doubtful accounts of $497,000. The cash generated from changes in assets and liabilities resulted primarily from $4.7 million of net receivables collections received in fiscal 2008 from the higher sales and accounts receivable balance in the fourth quarter of fiscal 2007 compared to the fourth quarter of fiscal 2008. Another source of cash was $1.3 million from changes in other assets and liabilities. Mitigating these cash sources was a use of cash for accounts payable disbursements of $1.4 million. The $1.3 million change in other assets and liabilities primarily represents increased accruals for approximately $800,000 in deferred revenue, $600,000 in accrued compensation and $900,000 in various other accrued liabilities, which were partially offset by an increase of approximately $1.0 million in supplier deposits related to the Company’s commercial products.

The Company provides a reserve for obsolescence to recognize the effects of engineering change orders and other matters that affect the value of the inventory. A detailed review of the inventory is performed yearly with quarterly updates for known changes that have occurred since the annual review. When inventory is deemed to have no further use or value, the Company disposes of the inventory and the reserve for obsolescence is reduced. During fiscal year 2008, the Company increased its reserve for inventory obsolescence by a net $393,000, which resulted from the disposal of $60,000 of inventory that had been reserved for at June 30, 2007 and additional reserves for obsolescence of approximately $453,000.

The Company determines its allowance for doubtful accounts by considering a number of factors, including the length of time trade accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the condition of the general economy and the industry as a whole. The Company writes-off accounts receivable when they become uncollectible, and payments subsequently received on such receivables are credited to the allowance for doubtful accounts. During fiscal year 2008, the Company wrote off $274,000 of receivables and decreased its provision for bad debts by $171,000.

Financing activities during fiscal year 2008 primarily reflected $3.1 million received under the Company’s stock plans.

The Company has a $6.0 million secured Credit Agreement with Comerica Bank, which expires on November 1, 2009. Proceeds under the Credit Agreement may be used for working capital and capital expenditures. The security for the loan is substantially all non real estate assets of the Company held in the United States. Borrowings are designated as a Prime-based Advance or as a Eurodollar-based Advance. Interest on Prime-based Advances is payable on the last day of each month and is calculated daily currently at the greater of¹/2% below prime rate or 1% above the Federal Funds Rate. Interest on Eurodollar-based Advances is calculated currently at 1.88% above the Eurodollar Rate offered at the time and for the period chosen and is payable on the last day of the applicable period. Quarterly, the Company pays a commitment fee of .075% per annum on the daily unused portion of the Credit Agreement. The Credit Agreement prohibits the Company from paying dividends. In addition, the Credit Agreement requires the Company to maintain a Tangible Net Worth, as defined in the Credit Agreement, of not less than $41.6 million as of June 30, 2008 and to have no advances outstanding for 30 consecutive days each calendar year. At June 30, 2008, the Company had no borrowings outstanding.

At June 30, 2008, the Company’s German subsidiary (“GmbH”) had an unsecured credit facility totaling 500,000 Euros (equivalent to $790,000 at June 30, 2008). The facility may be used to finance working capital needs and equipment purchases or capital leases. Any borrowings for working capital needs will bear interest at 9.0% on the first 100,000 Euros of borrowings and 2.0% for borrowings over 100,000 Euros. The German credit facility is cancelable at any time

by either GmbH or the bank and any amounts then outstanding would become immediately due and payable. At June 30, 2008, the facility supported outstanding letters of credit totaling 79,135 Euros (equivalent to approximately $125,000). At June 30, 2008, GmbH had no borrowings outstanding.

See Item 3, “Legal Proceedings” and Note 6 to the Consolidated Financial Statements, “Contingencies”, for a discussion of certain contingencies relating to the Company’s liquidity, financial position and results of operations. See also, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies - Litigation and Other Contingencies”.

At June 30, 2008, the Company holds long-term investments, with an original cost of $6.3 million, in investment grade auction rate securities. An auction is held every 28 days to provide holders of these auction rate securities the opportunity to increase (buy), decrease (sell) or hold their investment. Auctions for the Company’s investments in auction rate securities have been unsuccessful since August 2007. The unsuccessful auctions have resulted in the interest rate on these securities resetting at a premium interest rate every 28 days. To date, the Company has received all interest payments on these investments when due. In the event the Company needs to access funds invested in these auction rate securities, the Company would not be able to liquidate these securities until a future auction of these securities is successful or a buyer is found outside of the auction process.

The continued unsuccessful auctions caused the Company to re-evaluate the liquidity and fair value of these investments. The Company believes that the anticipated recovery period for these investments is likely to be longer than twelve months and as a result has recorded these investments at June 30, 2008 as long-term assets. The Company has determined that its investment in Blue Water Trust I, with an original cost of $3.7 million, has been other-than-temporarily impaired. Blue Water Trust I (“Blue Water”) is a Money Market Committed Preferred Custodial Trust Security (“CPS Security”) that invests in investment grade commercial paper and which has entered into a Put Agreement with RAM Reinsurance Company Ltd. (“Ram Re”), a wholly owned subsidiary of RAM Holdings Ltd., principally engaged in underwriting financial guaranty insurance. In the event Ram Re exercises its put option, Blue Water is required to purchase perpetual non-cumulative redeemable preference shares of Ram Re. During the second quarter of fiscal 2008, based on fair values provided by the Company’s broker, the Company recorded a $2.6 million other-than-temporary non-cash decline in the market value of this investment as Impairment of Long-Term Investment in the income statement. During fiscal 2008, based on fair values provided by the Company’s broker, the Company recorded a temporary non-cash decline of $161,000 in the market value of this investment and a temporary non-cash decline of $421,000 in the market value of two other investments with an original cost of $2.6 million in Other Comprehensive Income on the Balance Sheet. These other two investments are custodial receipts for separate series’ of Floating Rate Cumulative Preferred Securities issued by Primus Financial Products, LLC, an indirect subsidiary of Primus Guaranty, Ltd., principally engaged in selling credit swaps against credit obligations of corporate and sovereign issuers. The Company evaluates these investments at each balance sheet date. There is risk that evaluations based on factors existing at future balance sheet dates could require the recording of additional temporary declines in Other Comprehensive Income on the Balance Sheet or could ultimately result in a determination that there is a decline in value that is other than temporary and a loss would be recognized in the income statement at that time.

Based on the Company’s current business plan, cash and cash equivalents of $22.2 million at June 30, 2008 and its existing unused credit facilities, the Company does not currently anticipate that the lack of liquidity on these short-term investments will affect the Company’s ability to operate or fund its currently anticipated fiscal 2009 cash flow requirements.

The Company expects to spend approximately $2.0 million during fiscal year 2009 for capital equipment, although there is no binding commitment to do so. Based on the Company’s current business plan, including the introduction of its new line of commercial products, the Company believes that available cash on hand and existing credit facilities will be sufficient to fund anticipated fiscal year 2009 cash flow requirements, except to the extent that the Company implements new business development opportunities, which would be financed as discussed below. The Company does not believe that inflation has significantly impacted historical operations and does not expect any significant near-term inflationary impact.

The Company will consider evaluating business opportunities that fit its strategic plans. There can be no assurance that the Company will identify any opportunities that fit its strategic plans or will be able to enter into agreements with identified business opportunities on terms acceptable to the Company. The Company anticipates that it would finance any such business opportunities from available cash on hand, existing credit facilities, issuance of additional shares of its stock or additional sources of financing, as circumstances warrant.

Contractual Obligations

The following summarizes the Company’s contractual obligations at June 30, 2008, and the effect such obligations are expected to have on its liquidity and cash flow in future periods (in thousands):


			Less than						More than 5
	Total		1 Year		1 — 3 Years		3 — 5 Years		Years

Purchase Obligations⁽¹⁾	$	10,015	$	9,349	$	666		—		—
Operating Leases⁽²⁾	$	1,830	$	990	$	835	$	5		—
Long-term Accrued Taxes⁽³⁾		—		—		—		—		—

Total	$	11,845	$	10,339	$	1,501	$	5		—


(1)		A purchase obligation is defined as an agreement to purchase goods or services that is enforceable and legally binding. Included in the purchase obligations category above are obligations related to purchase orders for inventory purchases under the Company’s standard terms and conditions and under negotiated agreements with vendors. The Company expects to receive consideration (products or services) for these purchase obligations. The purchase obligation amounts do not represent all anticipated purchases in the future, but represent only those items for which the Company was contractually obligated at June 30, 2008.

(2)		Operating leases represent commitments to lease building space, office equipment and motor vehicles.

(3)		The Company has excluded long-term tax liabilities of $765,000 from the amounts presented as the amounts that will be settled in cash are not known.

Critical Accounting Policies

The Company’s discussion and analysis of its financial condition and results of operations are based upon the Company’s financial statements and accompanying notes, which have been prepared in accordance with accounting principles generally accepted in the United States (U.S. GAAP). The Company’s significant accounting policies are discussed in Note 1 of the Notes to Consolidated Financial Statements, “Summary of Significant Accounting Policies”. Certain of the Company’s significant accounting policies are subject to judgments and uncertainties, which affect the application of these policies and require the Company to make estimates based on assumptions that affect the reported amounts of assets, liabilities, revenues and expenses. The Company bases its estimates on historical experience and on various assumptions that are believed to be reasonable under the circumstances. On an on-going basis, the Company evaluates its estimates and underlying assumptions. In the event estimates or underlying assumptions prove to be different from actual amounts, adjustments are made in the subsequent period to reflect more current information. The Company believes that the following significant accounting policies involve management’s most difficult, subjective or complex judgments or involve the greatest uncertainty.

Revenue Recognition. The Company recognizes revenue in accordance with Staff Accounting Bulletin (“SAB”) 101,Revenue Recognition in Financial Statements,SAB 104,Revenue Recognition and EITF 00-21, Revenue Arrangements with Multiple Deliverables. Revenue related to products is recognized upon shipment when title and risk of loss has passed to the customer, there is persuasive evidence of an arrangement, the sales price is fixed or determinable, collection of the related receivable is reasonably assured and customer acceptance criteria have been successfully demonstrated. Revenue related to services is recognized upon completion of the service. The Company also has multiple element arrangements in its Automated Systems product line that may include purchase of equipment, labor support and/or training. Each element has value on a stand-alone basis. For multiple element arrangements, the Company defers from revenue recognition the greater of the fair value of any undelivered elements of the contract or the portion of the sales price of the contract that is not payable until the undelivered elements are completed. Delivered items are not contingent upon the delivery of any undelivered items nor do the delivered items include general rights of return. The Company does not have price protection agreements or requirements to buy back inventory. The Company’s Automated Systems products are made to order systems that are designed and configured to meet each customer’s specific requirements. The Company’s Technology Products are sold under agreements with fixed quantities with no rights of return. As a result, the Company has virtually no history of returns.

Stock-Based Compensation.The Company accounts for non-cash stock-based compensation in accordance with SFAS No. 123(R),Share-Based Payment. Under the fair value recognition provisions of this statement, share-based compensation cost is measured at the grant date based on the value of the award and is recognized as expense over the vesting period. Determining the fair value of share-based awards at the grant date requires judgment, including estimating the amount of share-based awards that are expected to be forfeited. The estimated forfeiture rate may change from time to time based upon the Company’s actual experience. An increase in the forfeiture rate would require the Company to reverse a portion of its prior expense for non-cash stock-based compensation, which would positively impact the Company’s results of operations. Because the Company currently experiences a low forfeiture rate, a reduction in the estimated forfeiture rate would not have a material impact on the Company’s results of operations.

Accounts Receivable.The Company monitors its accounts receivable and charges to expense an amount equal to its estimate of potential credit losses. The Company considers a number of factors in determining its estimates, including, the length of time trade accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation and the condition of the general economy and the industry as a whole. The use of different estimates for future credit losses would result in different charges to selling, general and administrative expense in each period presented and could negatively affect the Company’s results of operations for the period. In addition, if actual experience differs materially from the Company’s estimates, the Company could be required to record large credit losses that could negatively affect the Company’s results of operations for the period.

Inventories.Inventories are valued at the lower of cost or market; cost being determined under the first in, first out method. Provision is made to reduce inventories to net realizable value for excess and/or obsolete inventory. The Company reviews its inventory levels quarterly in order to identify obsolete and slow-moving inventory. The Company estimates excess or obsolete inventory based principally upon contemplated future customer demand for the Company’s products and the timing of product upgrades. The use of different assumptions in determining slow-moving and obsolete inventories would result in different charges to cost of sales in each period presented and could negatively affect the Company’s results of operations for the period. In addition, if actual experience differs materially from the Company’s estimates, the Company could be required to record large losses or gains that could negatively affect the Company’s results of operations for the period.

Long and Short-Term Investments. The Company’s accounts for its investments in accordance with Statement of Financial Accounting Standards No. 115, Accounting for Certain Investments in Debt and Equity Securities and SEC topics and guidance. Investments with a maturity of greater than three months to one year are classified as short-term investments. Investments with maturities beyond one year may be classified as short-term if the Company reasonably expects the investment to be realized in cash or sold or consumed during the normal operating cycle of the business. Investments available for sale are recorded at market value using the specific identification method. Investments expected to be held to maturity or until market conditions improve are measured at amortized cost in the statement of financial position if it is the Company’s intent and ability to hold those securities long-term. At each balance sheet date, the Company evaluates its investments for possible other-than-temporary impairment which involves significant judgment. In making this judgment, management reviews factors such as the length of time and extent to which fair value has been below the cost basis, the anticipated recovery period, the financial condition of the issuer, the credit rating of the instrument and the Company’s ability and intent to hold the investment for a period of time which may be sufficient for recovery of the cost basis. Any unrealized gains and losses on securities are reported as other comprehensive income as a separate component of shareholders’ equity until realized or until a decline in fair value is determined to be other than temporary. Once a decline in fair value is determined to be other-than-temporary, an impairment charge is recorded in the income statement. In fiscal 2008, the Company recorded a $2.6 million other-than-temporary decline in the market value of an investment in auction rate securities and a $582,000 temporary non-cash decline in the market value of this and other auction rate securities as described in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Liquidity and Capital Resources.” If market, industry, and/or investee conditions deteriorate, future impairments may be incurred.

Deferred Income Taxes.The Company accounts for its deferred income taxes in accordance with SFAS No. 109,Accounting for Income Taxes.Deferred income tax assets and liabilities represent the estimated future income tax effect of temporary differences between the book and tax basis of the Company’s assets and liabilities, assuming they will be realized and settled at the amounts reported in the Company’s financial statements. The Company records a valuation allowance to reduce its deferred tax assets to the amount that it believes is more likely than not to be realized. This assessment includes consideration for the scheduled reversal of temporary taxable differences, projected future taxable income and the impact of tax planning. The Company adjusts this valuation allowance periodically based upon changes in these considerations. In fiscal 2008, the Company reduced the valuation allowance, described in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Results of Operations — Fiscal Year Ended June 30, 2008, Compared to Fiscal Year Ended June 30, 2007 — Income Taxes” and Note 10 of the Notes to the Consolidated Financial Statements, “Income Taxes”, based on current and projected future taxable income. If actual long-term future taxable income is lower than the Company’s estimate, or the Company revises its initial estimates, the Company may be required to record material adjustments to the deferred tax assets, resulting in a charge to income in the period of determination and negatively impacting the Company’s results of operations and financial position for the period.

Litigation and Other Contingencies.The Company is subject to certain legal proceedings and other contingencies, the outcomes of which are subject to significant uncertainty. The Company accrues for estimated losses if it is probable that an asset has been impaired or a liability has been incurred and the amount of the loss can be reasonably estimated. The Company uses judgment and evaluates, with the assistance of legal counsel, whether a loss contingency arising from litigation should be disclosed or recorded. The outcome of legal proceedings is inherently uncertain and so typically a loss cannot be reasonably estimated. Accordingly, if the outcome of legal proceedings are different than is anticipated by the Company, the Company would have to record a charge for the matter, generally in the full amount at which it was resolved, in the period resolved, negatively impacting the Company’s results of operations and financial position for the period.

Product Warranty.The Company provides a reserve for warranty based on its experience and knowledge. The Company has limited historical claims experience in its new line of commercial products and therefore the Company provides for estimated warranty expenses at the time the new commercial products are sold to its customers based on knowledge of the industry in which the product is sold. Factors affecting the Company’s warranty liability include the number of units sold or in service and historical and anticipated rates of claims and cost per claim. The Company periodically assesses the adequacy of its warranty liability based on changes in these factors. If a special circumstance arises requiring a higher level of warranty reserve, the Company would make a special warranty provision commensurate with the facts. Management believes that the accounting estimate related to warranty reserves is a “critical accounting estimate” because changes in it could materially affect net income, and it requires management to estimate the frequency and amounts of future claims, which are inherently uncertain. Management’s policy is to continuously monitor its warranty liabilities to determine their adequacy. As a result, the warranty reserve is maintained at an amount management deems adequate to cover estimated warranty expense. Actual claims incurred in the future may differ from the original estimates, which may result in material revisions to the warranty reserve that could negatively or positively affect the Company’s results of operations for the period.

Market Risk Information

Perceptron’s primary market risk is related to foreign exchange rates. The foreign exchange risk is derived from the operations of its international subsidiaries, which are primarily located in Germany and for which products are produced in the U.S. The Company may from time to time have interest rate risk in connection with the investment of its cash.

Foreign Currency Risk

The Company has foreign currency exchange risk in its international operations arising from the time period between sales commitment and delivery for contracts in non-U.S. currencies. For sales commitments entered into in the non-United States currencies, the currency rate risk exposure is predominantly less than one year with the majority in the 120 to 150 day range. At June 30, 2008, the Company’s percentage of sales commitments in non-United States currencies was approximately 38.4% or $9.8 million, compared to 28.8% or $6.6 million at June 30, 2007.

The Company may use, from time to time, a limited hedging program to minimize the impact of foreign currency fluctuations. These transactions involve the use of forward contracts, typically mature within one year and are designed to hedge anticipated foreign currency transactions. The Company may use forward exchange contracts to hedge the net assets of certain of its foreign subsidiaries to offset the translation and economic exposures related to the Company’s investment in these subsidiaries.

At June 30, 2008, the Company had forward exchange contracts to sell 5.0 million Euros ($7.6 million equivalent) at a weighted average settlement rate of 1.52 Euros to the United States Dollar. The contracts outstanding at June 30, 2008, matured on July 1, 2008 and were not renewed. The objective of the hedge transactions was to protect designated portions of the Company’s net investment in its foreign subsidiary against adverse changes in the Euro/U.S. Dollar exchange rate. The Company assesses hedge effectiveness based on overall changes in fair value of the forward contract. Since the critical risks of the forward contract and the net investment coincide, there was no ineffectiveness. The accounting for the hedges is consistent with translation adjustments where any gains and losses are recorded to other comprehensive income. The Company recognized a loss of $735,000 in other comprehensive income (loss) for the unrealized and realized change in value of the forward exchange contracts during the fiscal year ended June 30, 2008. Offsetting this amount in other comprehensive income (loss) was the translation effect of the Company’s foreign subsidiary. There was no gain or loss recognized in earnings because the forward contracts were effective. The Company’s forward exchange contracts do not subject it to material risk due to exchange rate movements because gains and losses on these contracts offset losses and gains on the assets, liabilities, and transactions being hedged.

At June 30, 2007 and 2006, the Company had approximately $6.7 million and $5.0 million, respectively, of forward exchange contracts between the United States Dollar and the Euro with weighted average settlement prices of 1.34 and 1.25 Euro to each United States Dollar, respectively. The Company recognized a loss of $83,000 and $38,000, respectively in other comprehensive income (loss) for the unrealized change in value of forward exchange contracts during the fiscal years ended June 30, 2007 and June 30, 2006, respectively.

The Company’s potential loss in earnings that would have resulted from a hypothetical 10% adverse change in quoted foreign currency exchange rates related to the translation of foreign denominated revenues and expenses into U.S. dollars for the fiscal years ended June 30, 2008, 2007 and 2006, would have been approximately $49,000, $90,000 and $2,000, respectively.

Interest Rate Risk

The Company invests its cash and cash equivalents in high quality, short-term investments with primarily a term of three months or less. The Company’s long-term investments at June 30, 2008 consisted of investment grade auction rate securities for which the yields are reset every 28 days. Given the 28 day cycles in which the yield on

these investments is reset, at June 30, 2008, a 100 basis point rise in interest rates would not be expected to have a material adverse impact on the fair value of the Company’s cash and cash equivalents and long-term investments. As a result, the Company does not currently hedge these interest rate exposures.

Uncertainties in Credit Markets

The Company’s long-term investments are also subject to risk due to a decline in value of the investment. As of June 30, 2008, the Company holds long-term investments, with an original cost of $6.3 million, in investment grade auction rate securities. An auction is held every 28 days to provide holders of these auction rate securities the opportunity to increase (buy), decrease (sell) or hold their investment. Auctions for the Company’s investments in auction rate securities have been unsuccessful since August 2007. The unsuccessful auctions have resulted in the interest rate on these securities resetting at a premium interest rate every 28 days. To date, the Company has received all interest payments on these investments when due. In the event the Company needs to access principal funds invested in these auction rate securities, the Company would not be able to liquidate these securities until a future auction of these securities is successful or a buyer is found outside of the auction process.

During the second quarter of fiscal 2008, the Company determined that its investment in Blue Water Trust I, with an original cost of $3.7 million, had been other-than-temporarily impaired. Blue Water Trust I (“Blue Water”) is a Money Market Committed Preferred Custodial Trust Security (“CPS Security”) that invests in investment grade commercial paper and which has entered into a Put Agreement with RAM Reinsurance Company Ltd. (“Ram Re”), a wholly owned subsidiary of RAM Holdings Ltd., principally engaged in underwriting financial guaranty insurance. In the event Ram Re exercises its put option, Blue Water is required to purchase perpetual non-cumulative redeemable preference shares of Ram Re. In the second quarter ended December 31, 2007, based on fair values provided by the Company’s broker, the Company recorded a $2.6 million other-than-temporary non-cash decline in the market value of this investment as Impairment of Long-Term Investment in the income statement. During fiscal year 2008, based on fair values provided by the Company’s broker, the Company recorded a temporary non-cash decline of $161,000 in the market value of this investment and a temporary non-cash decline of $421,000 in the market value of two other investments with an original cost of $2.6 million in Other Comprehensive Income on the Balance Sheet. These other two investments are custodial receipts for separate series of Floating Rate Cumulative Preferred Securities issued by Primus Financial Products, LLC, an indirect subsidiary of Primus Guaranty, Ltd., principally engaged in selling credit swaps against credit obligations of corporate and sovereign issuers. The Company evaluates these investments at each balance sheet date. There is risk that evaluations based on factors existing at future balance sheet dates could require the recording of additional temporary declines in Other Comprehensive Income on the Balance Sheet or could ultimately result in a determination that there is a decline in value that is other than temporary and a loss would be recognized in the income statement at that time. See Item 1A, “Risk Factors” and Note 1 to the Consolidated Financial Statements, “Summary of Significant Accounting Policies — Long and Short-term Investments”.

Based on the Company’s current business plan, cash and cash equivalents of $22.2 million at June 30, 2008 and its existing unused credit facilities, the Company does not currently anticipate that the lack of liquidity on these investments will affect the Company’s ability to operate or fund its currently anticipated fiscal 2009 cash flow requirements.

New Accounting Pronouncements

For a discussion of new accounting pronouncements, see Note 1 to the Consolidated Financial Statements, “Summary of Significant Accounting Policies-New Accounting Pronouncements”.

ITEM 7A: QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Information required pursuant to this item is incorporated by reference herein from Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Market Risk Information”.

ITEM 8: FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA


	Page
Report of Independent Registered Public Accounting Firm		29
Consolidated Financial Statements:
Balance Sheets — June 30, 2008 and 2007		30
Statements of Income for the fiscal years ended June 30, 2008, 2007 and 2006		31
Statements of Cash Flows for the fiscal years ended June 30, 2008, 2007 and 2006		32
Statements of Shareholders’ Equity for the fiscal years ended June 30, 2008, 2007 and 2006		33
Notes to Consolidated Financial Statements		34

[GRANT THORNTON LETTERHEAD]

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Shareholders
Perceptron, Inc.

We have audited the accompanying consolidated balance sheets of Perceptron, Inc. (a Michigan Corporation) and subsidiaries as of June 30, 2008 and 2007, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended June 30, 2008. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Perceptron, Inc. and subsidiaries as of June 30, 2008 and 2007, and the results of their operations and their cash flows for each of the three years in the period ended June 30, 2008 in conformity with accounting principles generally accepted in the United States of America.

As discussed in Note 10 to the consolidated financial statements, the Company adopted Statement of Financial Accounting Standards Board Interpretation No. 48, “Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109” effective July 1, 2007.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Perceptron, Inc. and subsidiaries internal control over financial reporting as of June 30, 2008, based on the criteria established inInternal Control—Integrated Frameworkissued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated September 12, 2008 expressed an unqualified opinion.

/S/ Grant Thornton LLP

Southfield, Michigan
September 12, 2008

PERCEPTRON, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS
(In Thousands, Except Per Share Amount)


As of June 30,	2008			2007

ASSETS

Current Assets
Cash and cash equivalents	$	22,157		$	10,878
Short-term investments		—			6,300
Receivables:
Billed receivables, net of allowance for doubtful accounts of $228 and $673, respectively		16,948			21,287
Unbilled receivables		5,044			2,858
Other receivables		398			799
Inventories, net of reserves of $1,304 and $911, respectively		8,285			7,625
Deferred taxes		2,655			1,243
Other current assets		4,315			3,025

Total current assets		59,802			54,015

Property and Equipment
Building and land		6,013			5,984
Machinery and equipment		13,581			11,952
Furniture and fixtures		1,074			1,133

		20,668			19,069
Less — Accumulated depreciation and amortization		(13,407	)		(12,012	)

Net property and equipment		7,261			7,057

Long-Term Investments		3,104			—
Deferred Tax Asset		5,026			5,149


Total Assets	$	75,193		$	66,221


LIABILITIES AND SHAREHOLDERS’ EQUITY

Current Liabilities
Accounts payable	$	2,257		$	3,446
Accrued liabilities and expenses		4,867			2,764
Accrued compensation		1,785			1,075
Income taxes payable		1,066			883
Deferred revenue		4,594			3,483

Total current liabilities		14,569			11,651

Long-term Liabilities
Accrued taxes		765			765


Total liabilities		15,334			12,416


Shareholders’ Equity
Preferred stock — no par value, authorized 1,000 shares, issued none		—			—
Common stock, $0.01 par value, authorized 19,000 shares, issued and outstanding 8,844 and 8,142, respectively		88			81
Accumulated other comprehensive income		2,232			869
Additional paid-in capital		40,035			36,346
Retained earnings		17,504			16,509

Total shareholders’ equity		59,859			53,805


Total Liabilities and Shareholders’ Equity	$	75,193		$	66,221

The notes to the consolidated financial statements are an integral part of these statements.

PERCEPTRON, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF INCOME
(In Thousands, Except Per Share Amounts)


Years ended June 30,	2008			2007			2006

Net Sales	$	72,512		$	62,252		$	57,875
Cost of Sales		42,011			35,252			30,588

Gross Profit		30,501			27,000			27,287

Operating Expenses
Selling, general and administrative		19,945			17,262			15,155
Engineering, research and development		8,576			7,885			7,764

Total operating expenses		28,521			25,147			22,919


Operating Income		1,980			1,853			4,368

Other Income and (Expenses)
Interest income, net		1,029			958			722
Foreign currency gain (loss)		287			(84	)		(21	)
Impairment on long-term investment		(2,614	)		—			—
Other		52			19			(142	)

Total other income		(1,246	)		893			559


Income Before Income Taxes		734			2,746			4,927

Income Tax Benefit (Expense)		261			(1,287	)		(1,688	)


Net Income	$	995		$	1,459		$	3,239


Earnings Per Common Share
Basic	$	0.12		$	0.18		$	0.38
Diluted	$	0.11		$	0.17		$	0.35
Weighted Average Common Shares Outstanding
Basic		8,490			8,114			8,582
Dilutive effect of stock options		492			647			618

Diluted		8,982			8,761			9,200

The notes to the consolidated financial statements are an integral part of these statements.

PERCEPTRON, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOW
(In Thousands)


Years ended June 30,	2008			2007			2006

Cash Flows from Operating Activities
Net income	$	995		$	1,459		$	3,239
Adjustments to reconcile net income to net cash provided from (used for) operating activities:
Depreciation and amortization		1,394			1,333			1,345
Stock compensation expense		609			815			667
Deferred income taxes		(1,238	)		15			(12	)
Impairment on long-term investment		2,614			—			—
Disposal of assets		43			306			28
Allowance for doubtful accounts		(497	)		326			(39	)
Changes in assets and liabilities, exclusive of changes shown separately		4,512			(7,724	)		4,741

Net cash provided from (used for) operating activities		8,432			(3,470	)		9,969

Cash Flows from Financing Activities
Revolving credit borrowings		10			1,300			797
Revolving credit repayments		(10	)		(1,300	)		(797	)
Proceeds from stock plans		3,087			1,601			542
Repurchase of company stock		—			(5,184	)		(4,872	)

Net cash provided from (used for) financing activities		3,087			(3,583	)		(4,330	)

Cash Flows from Investing Activities
Capital expenditures		(1,527	)		(1,247	)		(1,093	)
Purchases of investments		—			(1,600	)		(2,500	)
Sales of investments		—			2,525			1,070

Net cash used for investing activities		(1,527	)		(322	)		(2,523	)

Effect of Exchange Rate Changes on Cash and Cash Equivalents		1,287			290			268


Net Increase (Decrease) in Cash and Cash Equivalents		11,279			(7,085	)		3,384
Cash and Cash Equivalents, July 1		10,878			17,963			14,579

Cash and Cash Equivalents, June 30	$	22,157		$	10,878		$	17,963


Changes in Assets and Liabilities, Exclusive of Changes Shown Separately
Receivables, net	$	4,696		$	(7,256	)	$	5,582
Inventories		(83	)		(1,007	)		(550	)
Accounts payable		(1,419	)		2,523			(187	)
Other assets and liabilities		1,318			(1,984	)		(104	)

	$	4,512		$	(7,724	)	$	4,741


Supplemental Disclosure of Cash Flow Information
Cash paid during the year for interest	$	93		$	1		$	10
Cash paid during the year for income taxes		379			795			1,393

The notes to the consolidated financial statements are an integral part of these statements.

PERCEPTRON, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
(In Thousands)


							Accumulated
							Other			Additional					Total
	Common			Stock			Comprehensive			Paid-In			Retained		Shareholders’
	Shares			Amount			Income (Loss)			Capital			Earnings		Equity

Balances, June 30, 2005		8,822		$	88		$	(677	)	$	42,770		$	11,811	$	53,992

Comprehensive income (loss)
Net income														3,239		3,239
Other comprehensive income
Foreign currency translation adjustments								700								700
Hedging								(38	)							(38	)

Total comprehensive income																3,901
Stock-based compensation											667					667
Stock plans		197			2						540					542
Stock repurchase		(667	)		(6	)					(4,866	)				(4,872	)


Balances, June 30, 2006		8,352		$	84		$	(15	)	$	39,111		$	15,050	$	54,230


Comprehensive income (loss)
Net income														1,459		1,459
Other comprehensive income
Foreign currency translation adjustments								967								967
Hedging								(83	)							(83	)

Total comprehensive income																2,343
Stock-based compensation											815					815
Stock plans		403			3						1,598					1,601
Stock repurchase		(613	)		(6	)					(5,178	)				(5,184	)


Balances, June 30, 2007		8,142		$	81		$	869		$	36,346		$	16,509	$	53,805


Comprehensive income (loss)
Net income														995		995
Other comprehensive income
Foreign currency translation adjustments								2,679								2,679
Hedging								(735	)							(735	)
Unrealized loss on investment								(581	)							(581	)

Total comprehensive income																2,358
Stock-based compensation											609					609
Stock plans		702			7						3,080					3,087


Balances, June 30, 2008		8,844		$	88		$	2,232		$	40,035		$	17,504	$	59,859

The notes to the consolidated financial statements are an integral part of these statements.

PERCEPTRON, INC. AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

1. Summary of Significant Accounting Policies

Operations

Perceptron, Inc. and its wholly-owned subsidiaries (collectively, the “Company”) are involved in the design, development, manufacture, and marketing of information-based measurement and inspection solutions for process improvements primarily for the automotive industry. The Company also designs, develops and manufacturers visual inspection devices that are marketed to professional trades people and do-it-yourself homeowners through marketing agreements with strategic partners.

Basis of Presentation and Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation. Certain long-term accrued taxes for prior periods have been reclassified to conform to the current period presentation.

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition

Revenue related to products is recognized upon shipment when title and risk of loss has passed to the customer, there is persuasive evidence of an arrangement, the sales price is fixed or determinable, collection of the related receivable is reasonably assured and customer acceptance criteria have been successfully demonstrated. Revenue related to services is recognized upon completion of the service. The Company also has multiple element arrangements in its Automated Systems product line that may include purchase of equipment, labor support and/or training. Each element has value on a stand-alone basis. For multiple element arrangements, the Company defers from revenue recognition the greater of the fair value of any undelivered elements of the contract or the portion of the sales price of the contract that is not payable until the undelivered elements are completed. Delivered items are not contingent upon the delivery of any undelivered items nor do the delivered items include general rights of return. The Company does not have price protection agreements or requirements to buy back inventory. The Company’s Automated Systems products are made to order systems that are designed and configured to meet each customer’s specific requirements. As a result, the Company has virtually no history of returns.

Research and Development

Research and development costs, including software development costs, are expensed as incurred.

Foreign Currency

The financial statements of the Company’s wholly-owned foreign subsidiaries have been translated in accordance with Statement of Financial Accounting Standards (“SFAS”) No. 52, with the functional currency being the local currency in the foreign country. Under this standard, translation adjustments are accumulated in a separate component of shareholders’ equity until the subsidiary is disposed of. During the fourth quarter of fiscal 2006, the Company liquidated Perceptron Canada, Inc., an inactive subsidiary, and recognized as expense accumulated translation adjustments of $311,000. Gains and losses on foreign currency transactions are included in the consolidated statement of income under “Other Income and Expenses”.

Earnings Per Share

Basic earnings per share (“EPS”) is calculated by dividing net income by the weighted average number of common shares outstanding during the period. Other obligations, such as stock options, are considered to be potentially dilutive common shares. Diluted EPS assumes the issuance of potential dilutive common shares outstanding during the period and adjusts for any changes in income and the repurchase of common shares that would have occurred from the assumed issuance, unless such effect is anti-dilutive. Effective with the adoption of Statement of Financial Accounting Standards No. 123 (revised 2004), Share-Based Payment, (“SFAS 123R”), the calculation of diluted shares also takes into effect the average unrecognized non-cash stock-based compensation expense and additional adjustments for tax benefits related to non-cash stock-based compensation expense.

Options to purchase 279,000, 281,000, and 480,000 shares of common stock outstanding in the fiscal years ended June 30, 2008, 2007 and 2006, respectively, were not included in the computation of diluted EPS because the effect would have been anti-dilutive.

Cash and Cash Equivalents

The Company considers all highly liquid investments purchased with maturities of three months or less to be cash equivalents. Fair value approximates carrying value because of the short maturity of the cash equivalents. At June 30, 2008, the Company had $22.2 million in cash and cash equivalents of which $12.3 million was held in foreign bank accounts.

Accounts Receivable and Concentration of Credit Risk

The Company markets and sells its products principally to automotive manufacturers, line builders, system integrators, original equipment manufacturers (“OEMs”) and value-added resellers. The Company’s accounts receivable are principally from a small number of large customers. The Company performs ongoing credit evaluations of its customers. Accounts receivable are generally due within 30 days and are stated at amounts due from customers net of an allowance for doubtful accounts. Accounts outstanding longer than the contractual payment terms are considered past due. The Company determines its allowance by considering a number of factors, including the length of time trade accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the condition of the general economy and the industry as a whole. The Company writes-off accounts receivable when they become uncollectible, and payments subsequently received on such receivables are credited to the allowance for doubtful accounts. Changes in the Company’s allowance for doubtful accounts are as follows (in thousands):


	Beginning		Costs and			Less		Ending
	Balance		Expenses			Charge-offs		Balance

Fiscal year ended June 30, 2008	$	673	$	(171	)	$	274	$	228
Fiscal year ended June 30, 2007	$	352	$	400		$	79	$	673
Fiscal year ended June 30, 2006	$	391	$	(22	)	$	17	$	352

Long and Short-term Investments

The Company’s accounts for its investments in accordance with Statement of Financial Accounting Standards No. 115, Accounting for Certain Investments in Debt and Equity Securities and SEC topics and guidance. Investments with a maturity of greater than three months to one year are classified as short-term investments. Investments with maturities beyond one year may be classified as short-term if the Company reasonably expects the investment to be realized in cash or sold or consumed during the normal operating cycle of the business. Investments available for sale are recorded at market value using the specific identification method. Investments expected to be held to maturity or until market conditions improve are measured at amortized cost in the statement of financial position if it is the Company’s intent and ability to hold those securities long-term. Each balance sheet date, the Company evaluates its investments for possible other-than-temporary impairment which involves significant judgment. In making this judgment, management reviews factors such as the length of time and extent to which fair value has been below the cost basis, the anticipated recovery period, the financial condition of the issuer, the credit rating of the instrument and the Company’s ability and intent to hold the investment for a period of time which may be sufficient for recovery of the cost basis. Any unrealized gains and losses on securities are reported as other comprehensive income as a separate component of shareholders’ equity until realized or until a decline in fair value is determined to be other than temporary. Once a decline in fair value is determined to be other-than-temporary, an impairment charge is recorded in the income statement. If market, industry, and/or investee conditions deteriorate, future impairments may be incurred.

At June 30, 2008, the Company holds available for sale, long-term investments, with an original cost of $6.3 million, in investment grade auction rate securities. An auction is held every 28 days to provide holders of these auction rate securities the opportunity to increase (buy), decrease (sell) or hold their investment. Auctions for the Company’s investments in auction rate securities have been unsuccessful since August 2007. The unsuccessful auctions have resulted in the interest rate on these securities resetting at a premium interest rate every 28 days. To date, the Company has received all interest payments on these investments when due. In the event the Company needs to access funds invested in these auction rate securities, the Company would not be able to liquidate these securities until a future auction of these securities is successful or a buyer is found outside of the auction process.

The continued unsuccessful auctions have caused the Company to re-evaluate the liquidity and fair value of these investments. The Company believes that the anticipated recovery period for these investments is likely to be longer than twelve months and as a result has recorded these investments at June 30, 2008 as long-term assets.

The Company has determined that its investment in Blue Water Trust I, with an original cost of $3.7 million, has been other-than-temporarily impaired. Blue Water Trust I (“Blue Water”) is a Money Market Committed Preferred Custodial Trust Security (“CPS Security”) that invests in investment grade commercial paper and which has entered into a Put Agreement with RAM Reinsurance Company Ltd. (“Ram Re”), a wholly owned subsidiary of RAM Holdings Ltd., principally engaged in underwriting financial guaranty insurance. In the event Ram Re exercises its put option, Blue Water is required to purchase perpetual non-cumulative redeemable preference shares of Ram Re. During the second

quarter of fiscal 2008, based on fair values provided by the Company’s broker, the Company recorded a $2.6 million other-than-temporary non-cash decline in the market value of this investment as Impairment of Long-Term Investment in the income statement. During fiscal 2008, based on fair values provided by the Company’s broker, the Company recorded a temporary non-cash decline of $161,000 in the market value of this investment and a temporary non-cash decline of $421,000 in the market value of two other investments with an original cost of $2.6 million in Other Comprehensive Income on the Balance Sheet. These other two investments are custodial receipts for separate series of Floating Rate Cumulative Preferred Securities issued by Primus Financial Products, LLC, an indirect subsidiary of Primus Guaranty, Ltd., principally engaged in selling credit swaps against credit obligations of corporate and sovereign issuers. The Company evaluates these investments at each balance sheet date. There is risk that evaluations based on factors existing at future balance sheet dates could require the recording of additional temporary declines in Other Comprehensive Income on the Balance Sheet or could ultimately result in a determination that there is a decline in value that is other than temporary and a loss would be recognized in the income statement at that time. The following table summarizes the Company’s long and short-term investments (in thousands):


			Unrealized		Estimated
	Cost		Gains (Losses)		Fair Value
Long-Term Investments
June 30, 2008
Auction rate securities	$	6,300	$	3,196	$	3,104

Short-Term Investments
June 30, 2007
Auction rate securities	$	6,300		—	$	6,300

Inventory

Inventory is stated at the lower of cost or market. The cost of inventory is determined by the first-in, first-out (“FIFO”) method. The Company provides a reserve for obsolescence to recognize the effects of engineering change orders, age and use of inventory that affect the value of the inventory. When the related inventory is disposed of, the obsolescence reserve is reduced. A detailed review of the inventory is performed yearly with quarterly updates for known changes that have occurred since the annual review. Inventory, net of reserves of $1,304,000 and $911,000 at June 30, 2008 and June 30, 2007, respectively, is comprised of the following (in thousands):


	At June 30,
	2008		2007

Component parts	$	2,831	$	2,900
Work in process		227		355
Finished goods		5,227		4,370

Total	$	8,285	$	7,625

Changes in the Company’s reserves for obsolescence are as follows (in thousands):


	Beginning		Costs and		Less		Ending
	Balance		Expenses		Charge-offs		Balance

Fiscal year ended June 30, 2008	$	911	$	453	$	60	$	1,304
Fiscal year ended June 30, 2007	$	554	$	421	$	64	$	911
Fiscal year ended June 30, 2006	$	520	$	193	$	159	$	554

Property and Equipment

Property and equipment are recorded at cost. Depreciation related to machinery and equipment and furniture and fixtures is primarily computed on a straight-line basis over estimated useful lives ranging from 3 to 13 years. Depreciation on buildings is computed on a straight-line basis over 40 years.

When assets are retired, the costs of such assets and related accumulated depreciation or amortization are eliminated from the respective accounts, and the resulting gain or loss is reflected in the consolidated statement of income.

Deferred Income Taxes

Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis, and the effects of operating losses and tax credit carry-forwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or

settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. A valuation allowance is provided for deferred tax assets if it is more likely than not that these items will either expire before the Company is able to realize their benefit, or future deductibility is uncertain.

Financial Instruments

The carrying amounts of the Company’s financial instruments, which include cash, short-term and long-term investments, accounts receivable, accounts payable, forward exchange contracts and amounts due to banks or other lenders, approximate their fair values at June 30, 2008 and 2007. Fair values have been determined through information obtained from market sources and management estimates.

In the normal course of business, the Company may employ forward exchange contracts to manage its exposure to fluctuations in foreign currency exchange rates. Forward contracts for forecasted transactions are designated as cash flow hedges and recorded as assets or liabilities on the balance sheet at their fair value. Changes in the contract’s fair value are recognized in accumulated other comprehensive income until they are recognized in earnings at the time the forecasted transaction occurs. If the forecasted transaction does not occur, or it becomes probable that it will not occur, the gain or loss on the related cash flow hedge is recognized in earnings at that time. For forward exchange contracts designated as hedging the net assets of the Company’s foreign subsidiaries, changes in the contract’s fair value are offset against the translation reflected in shareholders’ equity to the extent effective. The Company does not enter into any derivative transactions for speculative purposes.

Warranty

Automated Systems products carry a three-year warranty for parts and a one-year warranty for labor and travel related to warranty. Product sales to the forest products industry carry a three-year warranty for TriCam^® sensors. Sales of ScanWorks^® and ScanWorks^® ToolKit have a one-year warranty for parts; sales of NCA products have a two-year warranty for parts; sales of the Company’s commercial products have a two-year warranty for parts and labor. The Company provides a reserve for warranty based on its experience and knowledge. Because the Company does not have historical claims experience in its new line of commercial products, the Company provides for estimated warranty expenses at the time the new commercial products are sold to its customers based on knowledge of the industry in which the product is sold. Factors affecting the Company’s warranty liability include the number of units sold or in service and historical and anticipated rates of claims and cost per claim. The Company periodically assesses the adequacy of its warranty liability based on changes in these factors. If a special circumstance arises requiring a higher level of warranty, the Company would make a special warranty provision commensurate with the facts.


	Beginning		Costs and		Less		Ending
	Balance		Expenses		Charge-offs		Balance

Fiscal year ended June 30, 2008	$	263	$	723	$	506	$	480
Fiscal year ended June 30, 2007	$	200	$	449	$	386	$	263
Fiscal year ended June 30, 2006	$	209	$	222	$	231	$	200

Advertising Expense

The Company charges advertising expense in the period incurred. As of June 30, 2008, 2007, and 2006, advertising expense was $623,000, $290,000, and $92,000, respectively.

Self—Insurance

The Company is self-insured for health, vision and short term disability costs up to a certain stop loss level per claim and on an aggregate basis of a percentage of estimated annual costs. The estimated liability is based upon review by management and an independent insurance consultant of claims filed and claims incurred but not reported.

New Accounting Pronouncements

In March 2008, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standards (“SFAS”) No. 161, “Disclosures about Derivative Instruments and Hedging Activities” (“SFAS No. 161”). SFAS No. 161 amends and expands the disclosure requirements of SFAS No. 133, “Accounting for Derivative Instruments and Hedging Activities”, and requires entities to provide enhanced qualitative disclosures about objectives and strategies for using derivatives, quantitative disclosures about fair values and amounts of gains and losses on derivative contracts, and disclosures about credit-risk-related contingent features in derivative agreements. SFAS No. 161 is effective for fiscal years and interim periods beginning after November 15, 2008. The impact of adopting this statement on the Company’s financial statements has not yet been evaluated.

In December 2007, FASB issued SFAS No. 160, “Noncontrolling Interests in Consolidated Financial Statements — an amendment of Accounting Research Bulletin No. 51” (“SFAS 160”), which establishes accounting and reporting standards for ownership interests in subsidiaries held by parties other than the parent, the amount of consolidated net income attributable to the parent and to the noncontrolling interest, changes in a parent’s ownership interest and the valuation of retained noncontrolling equity investments when a subsidiary is deconsolidated. The Statement also establishes reporting requirements that provide sufficient disclosures that clearly identify and distinguish between the interests of the parent and the interests of the non-controlling owners. SFAS No. 160 is effective for fiscal years beginning after December 15, 2008. Because the Company does not have any minority interest subsidiaries, there is no impact of adopting this statement on the Company’s financial statements.

In December 2007, the FASB issued SFAS No. 141R (revised 2007), “Business Combinations”, which replaces SFAS No. 141. The statement retains the purchase method of accounting for acquisitions, but requires a number of changes, including changes in the way assets and liabilities are recognized in the purchase accounting. It also changes the recognition of assets acquired and liabilities assumed arising from contingencies, requires the capitalization of in-process research and development at fair value, and requires the expensing of acquisition-related costs as incurred. SFAS No. 141R is effective for the Company beginning July 1, 2009 and will apply prospectively to business combinations completed on or after that date.

In February 2007, the FASB issued Statement of Financial Accounting Standards (“SFAS”) No. 159, “The Fair Value Options for Financial Assets and Financial Liabilities — Including an amendment of FASB Statement No. 115”. This Statement permits entities to choose to measure many financial instruments and certain other items at fair value. The objective is to improve financial reporting by providing entities with the opportunity to mitigate volatility in reported earnings caused by measuring related assets and liabilities differently without having to apply complex hedge accounting provisions. This Statement is expected to expand the use of fair value measurement, which is consistent with the FASB’s long-term measurement objectives for accounting for financial instruments. This statement is effective for fiscal years beginning after November 15, 2007. At this time, the Company does not expect to adopt the fair value option for assets and liabilities; however, future events and circumstances may impact that decision.

In September 2006, the FASB issued Statement of Financial Accounting Standards (“SFAS”) No. 157, “Fair Value Measurements”. This statement defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles (GAAP), and expands disclosures about fair value measurements. This statement does not require any new fair value measurements, but does provide guidance on how to measure fair value by providing a fair value hierarchy used to classify the source of the information. This statement is effective for fiscal years beginning after November 15, 2007. In November 2007, the FASB proposed a one-year deferral of Statement 157’s fair-value measurement requirements for nonfinancial assets and liabilities that are not required or permitted to be measured at fair value on a recurring basis. The Company is assessing the impact of adopting this statement and does not anticipate that the adoption will have a significant impact on its results of operations or financial position.

2. Leases

The Company leases building space, office equipment and motor vehicles under operating leases. Lease terms generally cover periods from two to five years and may contain renewal options. The following is a summary, as of June 30, 2008, of the future minimum annual lease payments required under the Company’s operating leases having initial or remaining non-cancelable terms in excess of one year (in thousands):


Year	Minimum Rentals

2009	$	990
2010		632
2011		158
2012		45
2013 and beyond		5


Total minimum lease payments	$	1,830

Rental expenses for operating leases in the fiscal years ended June 30, 2008, 2007 and 2006 were $1,278,000, $1,121,000 and $1,105,000, respectively.

3. Credit Facilities

The Company had no debt outstanding at June 30, 2008 and June 30, 2007.

of each month and is calculated daily currently at the greater of¹/2% below prime rate or 1% above the Federal Funds Rate. Interest on Eurodollar-based Advances is calculated currently at 1.88% above the Eurodollar Rate offered at the time and for the period chosen and is payable on the last day of the applicable period. Quarterly, the Company pays a commitment fee of .075% per annum on the daily unused portion of the Credit Agreement. The Credit Agreement prohibits the Company from paying dividends. In addition, the Credit Agreement requires the Company to maintain a Tangible Net Worth, as defined in the Credit Agreement, of not less than $41.6 million as of June 30, 2008 and to have no advances outstanding for 30 consecutive days each calendar year.

At June 30, 2008, the Company’s German subsidiary (GmbH) had an unsecured credit facility totaling 500,000 Euros (equivalent to $790,000 at June 30, 2008). The facility may be used to finance working capital needs and equipment purchases or capital leases. Any borrowings for working capital needs will bear interest at 9.0% on the first 100,000 Euros of borrowings and 2.0% for borrowings over 100,000 Euros. The German credit facility is cancelable at any time by either GmbH or the bank and any amounts then outstanding would become immediately due and payable. At June 30, 2008, GmbH had no borrowings outstanding. At June 30, 2008, the facility supported outstanding letters of credit totaling 79,135 Euros (equivalent to approximately $125,000).

4. Foreign Exchange Contracts

At June 30, 2008, the Company had forward exchange contracts to sell 5.0 million Euros ($7.6 million equivalent) at a weighted average settlement rate of 1.52 Euros to the United States Dollar. The contracts outstanding at June 30, 2008, matured on July 1, 2008. The objective of the hedge transactions was to protect designated portions of the Company’s net investment in its foreign subsidiary against adverse changes in the Euro/U.S. Dollar exchange rate. The Company assesses hedge effectiveness based on overall changes in fair value of the forward contract. Since the critical risks of the forward contract and the net investment coincide, there was no ineffectiveness. The accounting for the hedges is consistent with translation adjustments where any gains and losses are recorded to other comprehensive income. The Company recognized a loss of $735,000 in other comprehensive income (loss) for the unrealized and realized change in value of the forward exchange contracts during the fiscal year ended June 30, 2008. Offsetting this amount in other comprehensive income (loss) was the translation effect of the Company’s foreign subsidiary. There was no gain or loss recognized in earnings because the forward contracts were effective. The Company’s forward exchange contracts do not subject it to material risk due to exchange rate movements because gains and losses on these contracts offset losses and gains on the assets, liabilities, and transactions being hedged.

5. Information About Major Customers

The Company has two segments, its Automated Systems Segment and its Technology Products Segment.

The Company’s principal customers for its Automated Systems products have historically been automotive companies that the Company either sells to directly or through manufacturing line builders, system integrators or original equipment manufacturers (“OEMs”). The Company’s Automated Systems products are typically purchased for installation in connection with new model retooling programs undertaken by these companies. Because sales are dependent on the timing of customers’ re-tooling programs, sales by customer vary significantly from year to year, as do the Company’s largest customers. For the fiscal year ended June 30, 2008, approximately 26% of total net sales were derived from the Company’s four largest automotive customers (General Motors, Volkswagen, Chrysler, and BMW). The Company also sells to system integrators or OEMs, who in turn sell to these same automotive companies. For the fiscal year ended June 30, 2008, approximately 7% of net sales were to manufacturing line builders, system integrators and OEMs for the benefit of the same four automotive companies. For the fiscal year ended June 30, 2007 approximately 31% of total net sales were derived from the Company’s four largest automotive customers (Volkswagen, General Motors, DaimlerChrysler and BMW). For the fiscal year ended June 30, 2006, approximately 38%, of total net sales were derived from the Company’s four largest automotive customers (General Motors, Volkswagen, BMW and Peugeot Citroen). The Company also sells to manufacturing line builders, system integrators or OEMs, who in turn sell to these same automotive companies. For the fiscal years ended June 30, 2007 and 2006, approximately 12% and 9%, respectively, of net sales, were to system integrators and OEMs for the benefit of the same four automotive companies. These numbers reflect consolidations that have occurred within the Company’s four largest automotive customers. During the fiscal year

ended June 30, 2008, direct sales to General Motors accounted for approximately 10.7% of the Company’s total net sales. At June 30, 2008, accounts receivable from General Motors totaled approximately $410,000.

The Company sells its Technology Products to a variety of markets through OEMs, system integrators and value-added resellers (“VARs”). These Technology Products target the digitizing, reverse engineering and inspection markets. The Company’s commercial products are distributed pursuant to signed agreements with third party OEMs with marketing knowledge and distribution channels in global wholesale and retail markets. The Company’s commercial products are currently sold to Ridge Tool and Snap-on for distribution through their wholesale and retail distribution networks. During the fiscal year ended June 30, 2008, sales to Ridge Tool were 23.0% of the Company’s total net sales. At June 30, 2008, accounts receivable from Ridge Tool totaled approximately $1.5 million.

6. Contingencies

Management is currently unaware of any significant pending litigation affecting the Company, other than the matters set forth below.

The Company may, from time to time, be subject to other claims and suits in the ordinary course of its business.

To estimate whether a loss contingency should be accrued by a charge to income, the Company evaluates, among other factors, the degree of probability of an unfavorable outcome and the ability to make a reasonable estimate of the amount of the loss. Since the outcome of claims and litigation is subject to significant uncertainty, changes in these factors could materially impact the Company’s financial position or results of operations.

7. 401(k) Plan

The Company has a 401(k) tax deferred savings plan that covers all eligible employees. The Company may make discretionary contributions to the plan. The Company’s contributions during the fiscal years ended June 30, 2008, 2007 and 2006, were $541,000, $539,000 and $437,000, respectively.

8. Employee Stock Purchase Plan

The Company has an Employee Stock Purchase Plan for all employees meeting certain eligibility criteria. Under the Plan, eligible employees may purchase shares of the Company’s common stock at 85% of its market value at the beginning of the six-month election period. Purchases are limited to 10% of an employee’s eligible compensation and the shares purchased are restricted from being sold for one year from the purchase date. At June 30, 2008, 114,738 shares remained available under the Plan. During fiscal years 2008, 2007 and 2006, 10,429, 12,401 and 11,854 shares, respectively, were issued to employees. The average purchase price per share was $7.78, $6.41 and $5.87 in fiscal years 2008, 2007 and 2006, respectively. In fiscal 2006 the Company adopted SFAS 123R and began recording stock based compensation expense in the income statement. During fiscal years 2008, 2007 and 2006, the Company recorded non-cash stock based compensation expense of $14,000, $30,000 and $29,000, respectively, related to this plan.

9. Stock Based Compensation

The Company uses the Black-Scholes model for determining stock option valuations. The Black-Scholes model requires subjective assumptions, including future stock price volatility and expected time to exercise, which affect the calculated values. The expected term of option exercises is derived from historical data regarding employee exercises and post-vesting employment termination behavior. The risk-free rate of return is based on published U.S. Treasury rates in effect for the corresponding expected term. The expected volatility is based on historical volatility of the Company’s stock price. These factors could change in the future, which would affect the stock-based compensation expense in future periods.

The Company recognized as an operating expense non-cash stock-based compensation costs in the amount of $609,000, $815,000 and $667,000 for the fiscal years ended June 30, 2008, 2007and 2006, respectively, which includes the Employee Stock Purchase Plan discussed above. This had the effect of decreasing net income by $446,000, or

$0.05 per diluted share for the fiscal year ended June 30, 2008, $647,000 or $.07 per diluted share for fiscal year 2007 and $537,000 or $.06 per diluted share for fiscal year 2006. As of June 30, 2008, the total remaining unrecognized compensation cost related to non-vested stock options amounted to $1.4 million. The Company expects to recognize this cost over a weighted average vesting period of 2.68 years.

The Company received $2,878,000 in cash from option exercises under all share-based payment arrangements for the twelve months ended June 30, 2008. The actual tax benefit realized, that related to tax deductions for non-qualified options exercised and disqualifying dispositions under all share-based payment arrangements, totaled $4,695,000 for fiscal 2008.

The Company maintains a 1992 Stock Option Plan (“1992 Plan”) and 1998 Global Team Member Stock Option Plan (“1998 Plan”) covering substantially all company employees and certain other key persons and a Directors Stock Option Plan (“Directors Plan”) covering all non-employee directors. During fiscal 2005, shareholders approved a new 2004 Stock Incentive Plan that replaced the 1992 and Directors Plans as to future grants. Under the terms of the 1998 Plan, no further grants are permitted to be made under the plan. Options previously granted under the 1992, Directors and 1998 Plans will continue to be maintained until all options are exercised, cancelled or expire. The 2004, 1992 and Directors Plans are administered by a committee of the Board of Directors, the Management Development, Compensation and Stock Option Committee. The 1998 Plan is administered by the President of the Company.

Awards under the 2004 Stock Incentive Plan may be in the form of stock options, stock appreciation rights, restricted stock or restricted stock units, performance share awards, director stock purchase rights and deferred stock units; or any combination thereof. The terms of the awards will be determined by the Management Development, Compensation and Stock Option Committee, except as otherwise specified in the 2004 Stock Incentive Plan. As of June 30, 2008, the Company has only issued awards in the form of stock options. Options outstanding under the 2004 Stock Incentive Plan and the 1992 and 1998 Plans generally become exercisable at 25% per year beginning one year after the date of grant and expire ten years after the date of grant. Options outstanding under the Directors Plan are either an initial option or an annual option. Prior to December 7, 2004, initial options of 15,000 shares were granted as of the date the non-employee director was first elected to the Board of Directors and became exercisable in full on the first anniversary of the date of grant. Prior to December 7, 2004, annual options of 3,000 shares were granted as of the date of the respective annual meeting to each non-employee director serving at least six months prior to the annual meeting and become exercisable in three annual increments of 33 1/3% after the date of grant. Options under the Directors Plan expire ten years from the date of grant. Option prices for options granted under these plans must not be less than fair market value of the Company’s stock on the date of grant.

Activity under these Plans is shown in the following tables:


	Fiscal Year 2008							Fiscal Year 2007
				Weighted		Aggregate					Weighted		Aggregate
				Average		Intrinsic					Average		Intrinsic
				Exercise		Value⁽¹⁾					Exercise		Value⁽¹⁾
Shares subject to option	Shares			Price		($000)		Shares			Price		($000)
Outstanding at beginning of period		1,834,959		$	6.53				1,985,447		$	6.13
New Grants (based on fair value of common stock at dates of grant)		282,000		$	9.85				334,070		$	8.55
Exercised		(664,385	)	$	4.30				(390,325	)	$	3.62
Expired		(104,865	)	$	24.60				(49,993	)	$	26.67
Forfeited		(56,672	)	$	7.83				(44,240	)	$	6.78

Outstanding at end of period		1,291,037		$	6.87	$	2,746		1,834,959		$	6.53	$	7,734
Exercisable at end of period		662,144		$	5.08	$	2,433		1,181,415		$	5.92	$	6,260


	Fiscal Year 2006
				Weighted		Aggregate
				Average		Intrinsic
				Exercise		Value⁽¹⁾
Shares subject to option	Shares			Price		($000)
Outstanding at beginning of period		2,204,007		$	7.56
New Grants (based on fair value of common stock at dates of grant)		243,675		$	6.72
Exercised		(170,699	)	$	2.16
Expired		(234,001	)	$	23.17
Forfeited		(57,535	)	$	6.62

Outstanding at end of period		1,985,447		$	6.13	$	6,557
Exercisable at end of period		1,337,246		$	6.08	$	5,352


(1)		The intrinsic value of a stock option is the amount by which the current market value of the underlying stock exceeds the exercise price of the option. The total intrinsic value of stock options exercised during the fiscal years ended June 30, 2008, 2007 and 2006, were $2,710,000, $1,025,000 and $571,000, respectively.

The total fair value of shares vested during the fiscal years ended June 30, 2008, 2007 and 2006, were $919,000, $843,000 and $746,000, respectively.

The estimated fair value as of the date options were granted during the periods presented using the Black-Scholes option-pricing model, was as follows:


	2008			2007			2006

Weighted Average Estimated Fair Value Per Share Of Options Granted During The Period	$	3.53		$	3.08		$	2.28
Assumptions:
Amortized Dividend Yield		—			—			—
Common Stock Price Volatility		32.93	%		31.42	%		30.16	%
Risk Free Rate Of Return		3.90	%		4.68	%		4.02	%
Expected Option Term (in years)		5			5			5

The following table summarizes information about stock options at June 30, 2008:


				Options Outstanding						Options Exercisable
						Weighted		Weighted				Weighted
						Average		Average				Average
						Remaining		Exercise				Exercise
Range of Exercise Prices				Shares		Contractual Life		Price		Shares		Price

$1.24	to	$	6.45		382,906		3.93	$	3.41		332,480	$	2.94
6.47	to		7.40		332,019		5.91	$	6.87		255,794	$	6.86
8.00	to		8.81		349,612		8.90	$	8.56		49,745	$	8.36
8.92	to		14.03		226,500		9.16	$	10.14		24,125	$	8.92

$1.24	to	$	14.03		1,291,037		6.70	$	6.87		662,144	$	5.08

At June 30, 2008, options covering 16,038 shares were available for future grants under the 2004 Plan.

10. Income Taxes

Income from continuing operations before income taxes for U.S. and foreign operations was as follows (in thousands):


	2008			2007		2006
U.S.	$	(388	)	$	679	$	1,096
Foreign		1,122			2,067		3,831

Total	$	734		$	2,746	$	4,927

During fiscal year 2008, the Company recorded a $619,000 tax benefit from the reduction of a portion of the Company’s tax valuation allowance related to the credits that the Company now believes are more likely than not to be realized based on the continued and expected future taxable income of the Company. During fiscal 2006, the Company recorded $290,000 of tax expense related to the repatriation of $6.3 million of un-remitted earnings of certain of the Company’s European subsidiaries under the provisions of the American Jobs Creation Act of 2004. The income tax provision (benefit) reflected in the statement of income consists of the following (in thousands):


	2008			2007			2006
Current provision (benefit):
U.S. Federal & State	$	21		$	(193	)	$	420
Foreign		629			1,406			537
Deferred taxes
U.S.		(811	)		307			757
Foreign		(100	)		(233	)		(26	)

Total provision (benefit)	$	(261	)	$	1,287		$	1,688

The Company’s deferred tax assets are substantially represented by the tax benefit of net operating losses and the tax benefit of future deductions represented by allowance for bad debts, warranty expenses, inventory obsolescence and tax credit carry-forwards. The Company established in fiscal 2002 a valuation allowance for tax credit carry-forwards and other items where it was more likely than not that these items would expire or not be deductible before the Company was

able to realize their benefit. In the fourth quarter of fiscal 2008, the Company recognized a $619,000 tax benefit from the reduction of a portion of the Company’s tax valuation allowance related to tax credits that the Company now believes are more likely than not to be realized based on the continued and expected future taxable income of the Company. Mitigating this decrease in fiscal 2008 was an increase in the valuation allowance for net operating loss carry-forwards related to some of the Company’s foreign operations where the Company believed it was more likely than not that the tax benefits would not be fully utilized in the next few years. Certain tax liabilities, previously recorded to the valuation reserve, were reclassified in accordance with the adoption of FIN 48 (see below). In the second quarter of fiscal 2006, the Company recognized a $725,000 tax benefit associated with reversing the valuation allowance related to net operating losses in the United States. This action was taken because the Company believed there was positive evidence that it was more likely than not that the tax benefits associated with the valuation allowance on the net operating loss carry-forwards in the United States would be utilized. The positive evidence was based on several years of taxable income in the United States and expected taxable income in the United States in the future. The Company continues to have a valuation allowance for tax credit carry-forwards in the United States that it still expects will more likely than not expire prior to the tax benefit being realized. The Company also has a valuation allowance for net operating loss carry-forwards for some of its foreign operations. The components of deferred tax assets were as follows (in thousands):


	2008			2007			2006

Benefit of net operating losses	$	4,130		$	4,803		$	4,399
Tax credit carry-forwards		3,842			3,780			3,571
Other, principally reserves		2,629			1,015			1,405

Deferred tax asset		10,601			9,598			9,375
Valuation allowance		(2,920	)		(3,206	)		(2,959	)

Net deferred tax asset	$	7,681		$	6,392		$	6,416


Rate reconciliation:
Provision at U.S. statutory rate		34.0	%		34.0	%		34.0	%
Net effect of taxes on foreign activities		(12.1	)%		11.1	%		(13.5	)%
Tax effect of U.S. permanent differences		(4.4	)%		5.4	%		8.6	%
State taxes and other, net		1.8	%		0.4	%		0.1	%
Adjustment of federal/foreign income taxes related to prior years		(15.9	)%		(13.0	)%		20.0	%
Valuation allowance		(39.0	)%		9.0	%		(14.9	)%

Effective tax rate		(35.6	)%		46.9	%		34.3	%

No provision was made with respect to earnings as of June 30, 2008 that have been retained for use by foreign subsidiaries. It is not practicable to estimate the amount of unrecognized deferred tax liability for the undistributed foreign earnings. At June 30, 2008, the Company had net operating loss carry-forwards for Federal income tax purposes of $14.4 million that expire in the years 2021 through 2028 and tax credit carry-forwards of $3.8 million of which $3.6 million expire in the years 2009 through 2027. Included in the Federal net operating loss carry-forward is $5.9 million from the exercise of employee stock options, the tax benefit of which, when recognized, will be accounted for as an increase to additional paid-in-capital rather than a reduction of the income tax provision. The net change in the total valuation allowance for the years ended June 30, 2008, 2007 and 2006 was a decrease of $286,000, an increase of $247,000 and a decrease of $733,000, respectively.

In July 2007, the State of Michigan signed into law the Michigan Business Tax Act, replacing the Michigan single business tax with a business income tax and modified gross receipts tax. These new taxes took effect on January 1, 2008, and, because they are based on or derived from income-based measures, the provisions of SFAS No. 109, “Accounting for Income Taxes,” apply as of the enactment date. In September 2007, an amendment to the Michigan Business Tax Act was also signed into law establishing a deduction to the business income tax base if temporary differences result in a deferred tax liability as measured at December 31, 2007. In December 2007, another modification was passed by the legislature to add a surcharge that effectively increased the tax rate.

Fin 48

On July 1, 2007, the Company adopted the provisions of Financial Accounting Standards Board (“FASB”) Interpretation No. 48 (“FIN 48”), “Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109”. Previously, the Company had accounted for tax contingencies in accordance with Statement of Financial Accounting Standards 5, “Accounting for Contingencies”. FIN 48 prescribes a recognition threshold and a measurement attribute for the financial statement reporting of tax positions taken in tax returns. For financial reporting purposes, the Company can recognize only tax benefits from an uncertain tax position if it is more likely than not that the tax position will be sustained on examination by the taxing authorities. FIN 48 also provides guidance on derecognition of income tax assets and liabilities, classification of current and deferred income tax assets and liabilities, accounting for interest and penalties associated with tax positions and income tax disclosures.

Adopting FIN 48 did not result in any material adjustment in the liability for unrecognized income tax benefits. On July 1, 2007, the Company had $1.6 million of unrecognized tax benefits, of which $844,000 would affect the effective tax rate if recognized. As of June 30, 2008, the Company had $1.6 million of unrecognized tax benefits, of which $882,000 would affect the effective tax rate if recognized. The Company’s policy is to classify interest and penalties related to unrecognized tax benefits as interest expense and income tax expense, respectively. As of June 30, 2008 there was no accrued interest or penalties related to uncertain tax positions recorded on the Company’s financial statements. For U.S. Federal income tax purposes, the tax years 1999 — 2007 remain open to examination by government tax authorities as a result of the Company’s net operating loss carry-forward. For German income tax purposes, the tax years 2004 — 2007 remain open to examination by government tax authorities.

The aggregate changes in the balance of unrecognized tax benefits were as follows (in thousands):


Year End June 30,	2008
Balance, beginning of year	$	1,609
Increases for tax positions related to the current year		38

Balance, year end	$	1,647

11. Segment and Geographic Information

Effective April 1, 2007, the Company organized its business into two operating segments, Automated Systems and Technology Products. The Company’s reportable segments are strategic business units that have separate management teams focused on different marketing strategies. The Automated Systems segment primarily sells its products to automotive companies either directly or through manufacturing line builders, system integrators or OEMs. The Company’s Automated Systems products are primarily custom-designed systems typically purchased for installation in connection with new model retooling programs. The Automated Systems segment includes value added services that are primarily related to Automated Systems products. The Technology Products segment sells its products to a variety of markets through OEMs, system integrators, value-added resellers and distributors. The Company’s Technology Products target the digitizing, reverse engineering and inspection markets and include products that are sold as whole components ready for use.

The accounting policies of the segments are the same as those described in the summary of significant policies. The Company evaluates performance based on operating income, excluding unusual items. Company-wide costs are allocated between segments based on revenues and/or labor as deemed appropriate.


Reportable Segments ($000)	Automated Systems			Technology Products			Consolidated


Twelve months ended June 30, 2008
Net sales	$	39,085		$	33,427		$	72,512
Operating income (loss)		(1,140	)		3,120			1,980
Assets, net		53,404			21,789			75,193
Accumulated depreciation and amortization		9,519			3,888			13,407

Twelve months ended June 30, 2007
Net sales	$	42,309		$	19,943		$	62,252
Operating income		1,007			846			1,853
Assets, net		43,496			22,725			66,221
Accumulated depreciation and amortization		7,904			4,108			12,012

Twelve months ended June 30, 2006
Net sales	$	46,959		$	10,916		$	57,875
Operating income (loss)		4,871			(503	)		4,368
Assets, net		50,916			12,244			63,160
Accumulated depreciation and amortization		9,079			2,185			11,264

The Company primarily accounts for geographic sales based on the country from which the sale is invoiced rather than the country to which the product is shipped. The Company operates in three primary geographic areas: The Americas (substantially all of which is the United States, with immaterial net sales in Brazil), Europe, and Asia.


Geographical Regions ($000)	Americas		Europe¹		Asia		Consolidated


Twelve months ended June 30, 2008
Net sales	$	43,308	$	24,170	$	5,034	$	72,512
Long-lived assets, net		9,674		500		191		10,365

Twelve months ended June 30, 2007
Net sales	$	33,086	$	26,772	$	2,394	$	62,252
Long-lived assets, net		6,438		513		106		7,057

Twelve months ended June 30, 2006
Net sales	$	37,384	$	18,938	$	1,553	$	57,875
Long-lived assets, net		6,765		534		109		7,408


¹		The Company’s German subsidiary had net external sales of $24.2 million, $26.8 million and $18.9 million in the fiscal years ended June 30, 2008, 2007 and 2006, respectively. Long-lived assets of the Company’s German subsidiary were $468,000, $478,000 and $514,000 as of June 30, 2008, 2007 and 2006, respectively.

12. Accrued Compensation

On January 21, 2008 the Company announced the retirement of Alfred A. Pease as President and Chief Executive Officer. In addition, on January 21, 2008, the Company and Mr. Pease entered into an Employment and Amended and Restated Severance Agreement (the “Employment Agreement”). Pursuant to the Employment Agreement, Mr. Pease will receive his base salary through June 30, 2009, supplemental compensation based upon the number of days that he provides services to the Company following his retirement, health benefits until he becomes eligible for Medicare coverage and welfare benefits and certain other benefits during the salary continuation period. Mr. Pease currently maintains an advisory role to the Company. During the third quarter of fiscal 2008, the Company accrued an expense of approximately $600,000, representing certain of the amounts due to Mr. Pease pursuant to the Employment Agreement. As of June 30, 2008, $417,000 of this accrual remains in Accrued Compensation on the balance sheet.

13. Selected Quarterly Financial Data (unaudited)

Selected unaudited quarterly financial data for the fiscal years ended June 30, 2008 and 2007 are as follows (in thousands, except per share amounts):


	Quarter Ended
Fiscal Year 2008	09/30/07		12/31/07			03/31/08		06/30/08
Net sales	$	17,666	$	19,117		$	18,203	$	17,526
Gross profit		7,101		8,841			7,938		6,621
Net income (loss)		447		(188	)		211		525
Earnings (loss) per share
Basic		0.05		(0.02	)		0.02		0.06
Diluted		0.05		(0.02	)		0.02		0.06


Fiscal Year 2007	09/30/06			12/31/06			03/31/07		06/30/07
Net sales	$	10,710		$	12,234		$	15,954	$	23,354
Gross profit		4,487			4,546			7,257		10,710
Net income (loss)		(641	)		(864	)		691		2,273
Earnings (loss) per share
Basic		(0.08	)		(0.11	)		0.09		0.28
Diluted		(0.08	)		(0.11	)		0.08		0.26

ITEM 9: CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES

None.

ITEM 9A: CONTROLS AND PROCEDURES

Evaluation Of Disclosure Controls And Procedures

The Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including its Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures pursuant to Rule 13a-15 of the Securities Exchange Act of 1934 (the “1934 Act”). Based upon that evaluation, the Company’s Chief Executive Officer and Chief Financial Officer concluded that, as of June 30, 2008, the Company’s disclosure controls and procedures were effective. Rule 13a-15(e) of the 1934 Act defines “disclosure controls and procedures” as controls and other procedures of the Company that are designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the 1934 Act is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the 1934 Act is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Changes In Internal Control Over Financial Reporting

There have been no changes in the Company’s internal control over financial reporting during the quarter ended June 30, 2008 identified in connection with the Company’s evaluation that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

Report Of Management On Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of our financial reporting for external purposes in accordance with accounting principles generally accepted in the United States of America. Internal control over financial reporting includes maintaining records that in reasonable detail accurately and fairly reflect our transactions; providing reasonable assurance that transactions are recorded as necessary for preparation of our financial statements; providing reasonable assurance that receipts and expenditures of Company assets are made in accordance with management authorization; and providing reasonable assurance that unauthorized acquisition, use, or disposition of Company assets that could have a material effect on our financial statements would be prevented or detected on a timely basis. Because of its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that a misstatement of our financial statements would be prevented or detected.

Management conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework inInternal Control — Integrated Frameworkissued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management concluded that the Company’s internal control over financial reporting was effective as of June 30, 2008. Grant Thornton LLP has audited our internal control over financial reporting as of June 30, 2008. Their report is included below.

[GRANT THORNTON LETTERHEAD]

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Shareholders
Perceptron, Inc.

We have audited Perceptron, Inc. (a Michigan Corporation) and subsidiaries’ (the “Company”) internal control over financial reporting as of June 30, 2008, based on criteria established inInternal Control—Integrated Frameworkissued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Report of Management on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Perceptron, Inc. and subsidiaries maintained, in all material respects, effective internal control over financial reporting as of June 30, 2008, based on criteria established inInternal Control—Integrated Frameworkissued by COSO.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Perceptron, Inc. and subsidiaries as of June 30, 2008, and the related consolidated statements of income, shareholders’ equity and cash flows for each of the three years in the period ended June 30, 2008 and our report dated September 12, 2008 expressed an unqualified opinion.

/S/ Grant Thornton LLP

Southfield, Michigan
September 12, 2008

ITEM 9B: OTHER INFORMATION

None.

PART III

ITEM 10: DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE OF THE REGISTRANT

The information contained under the captions “Matters to Come before the Meeting — Proposal 1: Election of Directors”, “Corporate Governance”, “Executive Officers”, “Section 16(a) Beneficial Ownership Reporting Compliance” and “Corporate Governance — Code of Ethics” of the registrant’s proxy statement for 2008 Annual Meeting of Shareholders (the “Proxy Statement”) is incorporated herein by reference.

The information required by Part III, Item 10 with respect to the Company’s nominating committee, audit committee and the audit committee’s financial expert is set forth in the Proxy Statement under the captions “Corporate Governance — Audit Committee”, “Corporate Governance — Nominating and Corporate Governance Committee” and “Corporate Governance — Audit Committee Report,” which paragraphs are incorporated herein by reference

The Company has adopted a Code of Business Conduct and Ethics that applies to all of the Company’s directors, executive and financial officers and employees. The Code of Business Conduct and Ethics has been posted to the Company’s website at www.perceptron.com in the Company section under “Financials” and is available free of charge through the Company’s website. The Company will post information regarding any amendment to, or waiver from, the Company’s Code of Business Conduct and Ethics for executive and financial officers and directors on the Company’s website in the Company section under “Financials”.

ITEM 11: EXECUTIVE COMPENSATION

The information contained under the captions “Matters to Come before the Meeting — Proposal 1: Election of Directors — Director Compensation for 2008”, “Matters to Come before the Meeting — Proposal 1: Election of Directors — Standard Director Compensation Arrangements”, “Compensation of Executive Officers”, “Corporate Governance — Management Development, Compensation and Stock Option Committee Interlocks and Insider Participation” and “Compensation of Executive Officers — Report of the Management Development, Compensation and Stock Option Committee” of the Proxy Statement is incorporated herein by reference.

ITEM 12: SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information contained under the captions “Share Ownership of Management and Certain Shareholders — Principal Shareholders” and “Share Ownership of Management and Certain Shareholders — Beneficial Ownership by Directors and Executive Officers” of the Proxy Statement is incorporated herein by reference.

EQUITY COMPENSATION PLAN INFORMATION

The following table gives information about the Company’s Common Stock that may be issued upon the exercise of options, warrants and rights under all of the Company’s existing equity compensation plans as of June 30, 2008, including the 2004 Stock Incentive Plan, the 1992 Stock Option Plan, the Directors Stock Option Plan, the 1998 Global Team Member Stock Option Plan, and the Employee Stock Purchase Plan (together, the “Plans”):


						Number of securities
						remaining available for
	Number of securities			Weighted-average		future issuance under
	to be issued upon			exercise price of		equity compensation
	exercise of			outstanding		plans (excluding
	outstanding options,			options, warrants		securities
Plan Category	warrants and rights			and rights		reflected in column (a))
	(a)			(b)		(c)
Equity compensation plans approved by shareholders:
2004 Stock Incentive Plan		514,325	⁽¹⁾	$	9.00		16,038
1992 Stock Option Plan		183,700	⁽²⁾	$	4.05		—
Directors Stock Option Plan		127,000	⁽²⁾	$	4.50		—
Employee Stock Purchase Plan		—	⁽³⁾		—		114,738

Total of equity compensation plans approved by shareholders		825,025		$	7.21		130,776
Equity compensation plans not approved by shareholders: 1998 Global Team Member Stock Option Plan		447,887	⁽⁴⁾	$	6.27		—


Total:		1,272,912		$	6.88		130,776


(1)		Awards under the 2004 Stock Incentive Plan may be in the form of stock options, stock appreciation rights, restricted stock or restricted stock units, performance share awards, director stock purchase rights and deferred stock units; or any combination thereof.

(2)		The 2004 Stock Incentive Plan replaced the 1992 Stock Option Plan and Directors Stock Option Plan effective December 7, 2004. Further grants under these plans have been cancelled.

(3)		Does not include an undeterminable number of shares subject to a payroll deduction election under the Employee Stock Purchase Plan for the period from July 1, 2008 until December 31, 2008, which will not be issued until January 2009.

(4)		The 1998 Global Team Member Stock Option Plan expired on February 25, 2008. No further grants under this plan will be made.

1998 Global Team Member Stock Option Plan

On February 26, 1998, the Company’s Board approved the 1998 Global Team Member Stock Option Plan (the “1998 Plan”), pursuant to which non-qualified stock options may be granted to employees who are not officers or directors or subject to Section 16 of the Exchange Act. The 1998 Plan has been amended by the Board on several occasions thereafter. The 1998 Plan expired on February 25, 2008. No further grants under this plan will be made. The expiration of the 1998 Plan does not affect any awards previously granted under the 1998 Plan.

The purpose of the 1998 Plan is to promote the Company’s success by linking the personal interests of non-executive employees to those of the Company’s shareholders and by providing participants with an incentive for outstanding performance. The 1998 Plan authorizes the granting of non-qualified stock options only. The President of the Company administers the 1998 Plan and had the power to set the terms of any grants under the 1998 Plan. The exercise price of an option could not be less than the fair market value of the underlying stock on the date of grant and no option has a term of more than ten years. All of the options that are currently outstanding under the 1998 Plan become exercisable ratably over a four-year period beginning at the grant date and expire ten years from the date of grant. If, for any reason, an option lapses, expires or terminates without having been exercised in full, the unpurchased shares covered thereby are again available for grants of options under the 1998 Plan. In addition, if the option is exercised by delivery to the Company of shares previously acquired pursuant to options granted under the 1998 Plan, then shares of Common Stock delivered in payment of the exercise price of an option will again be available for grants of options under the 1998 Plan.

The exercise price is payable in full in cash at the time of exercise; or in shares of Common Stock, (but generally, only if such shares have been owned for at least six months or, if they have not been owned by the optionee for at least six months, the optionee then owns, and has owned for at least six months, at least an equal number of shares of Common Stock as the option shares being delivered); or the exercise price may be paid by delivery to the Company of a properly executed exercise notice, together with irrevocable instructions to the participant’s broker to deliver to the Company sufficient cash to pay the exercise price and any applicable income and employment withholding taxes, in accordance with a written agreement between the Company and the brokerage firm (“cashless exercise” procedure).

Generally, if the employment by the Company of any optionee who is an employee terminates for any reason, other than by death or total and permanent disability, any option which the optionee is entitled to exercise on the date of employment termination may be exercised by the optionee at any time on or before the earlier of the expiration date of the option or three months after the date of employment termination, but only to the extent of the accrued right to purchase at the date of such termination. In addition, the President of the Company has the discretionary power to extend the date to exercise beyond three months after the date of employment termination. If the employment of any optionee who is an employee is terminated because of total and permanent disability, the option may be exercised by the optionee at any time on or before the earlier of the expiration date of the option or one year after the date of termination of employment, but only to the extent of the accrued right to purchase at the date of such termination. If any optionee dies while employed by the Company and, if at the date of death, the optionee is entitled to exercise an option, such option may be exercised by any person who acquires the option by bequest or inheritance or by reason of the death of the optionee, or by the executor or administrator of the estate of the optionee, at any time before the earlier of the expiration date of the option or one year after the date of death of the optionee, but only to the extent of the accrued right to purchase at the date of death.

The 1998 Plan provides for acceleration of vesting of awards in the event of a change in control of the Company. See “Compensation of Executive Officers — Potential Payments Upon Termination or Change in Control” of the Proxy Statement for a definition of change in control. The Board may amend or terminate the 1998 Plan at any time without shareholder approval, but no amendment or termination of the 1998 Plan or any award agreement may adversely affect any award previously granted under the 1998 Plan without the consent of the participant. The NASDAQ listing requirements prohibit the Company from amending the 1998 Plan to add additional shares of Common Stock without shareholder approval.

ITEM 13: CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE

The information contained under the captions “Corporate Governance — Board of Directors and Committees” and “Related Party Transactions” of the Proxy Statement is incorporated herein by reference.

ITEM 14: PRINCIPAL ACCOUNTANT FEES AND SERVICES

The information contained under the captions “Independent Accountants — Policy for Pre-Approval of Audit and Non-Audit Services” and “Independent Accountants — Fees Paid to Independent Registered Public Accounting Firm” of the Proxy Statement is incorporated herein by reference.

PART IV

ITEM 15: EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

	A.		Financial Statements and Schedules Filed

			Financial Statements — see Item 8 of this report. Financial statement schedules have been omitted since they are either not required, not applicable, or the information is otherwise included.

	B.		Exhibits:

			Exhibits — the exhibits filed in response to Item 601 of Regulation S-K with this report are listed on pages 52 through 55. The Exhibit List is incorporated herein by reference.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Annual Report on Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized.


	Perceptron, Inc. (Registrant)
	By:	/S/ Harry T. Rittenour
		Harry T. Rittenour, President and
		Chief Executive Officer (Principal Executive Officer)

		Date: September 12, 2008

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.


Signatures	Title	Date

/S/ Harry T. Rittenour Harry T. Rittenour	President, Chief Executive Officer and Director (Principal Executive Officer)	September 12, 2008

/S/ John H. Lowry III John H. Lowry III	Vice President and Chief Financial Officer (Principal Financial Officer)	September 12, 2008

/S/ Sylvia M. Smith Sylvia M. Smith	Controller (Principal Accounting Officer)	September 12, 2008

/S/ W. Richard Marz W. Richard Marz	Chairman of the Board and Director	September 12, 2008

/S/ David J. Beattie David J. Beattie	Director	September 12, 2008

/S/ Kenneth R. Dabrowski Kenneth R. Dabrowski	Director	September 12, 2008

/S/ Philip J. DeCocco Philip J. DeCocco	Director	September 12, 2008

/S/ Robert S. Oswald Robert S. Oswald	Director	September 12, 2008

/S/ James A. Ratigan James A. Ratigan	Director	September 12, 2008

/S/ Terryll R. Smith Terryll R. Smith	Director	September 12, 2008

EXHIBIT INDEX


Exhibit No.		Description of Exhibits

3.		Restated Articles of Incorporation and Bylaws.

3.1		Restated Articles of Incorporation, as amended to date, are incorporated herein by reference to Exhibit 3.1 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 1998.

3.2		Amended and Restated Bylaws, as amended to date, are incorporated herein by reference to Exhibit 3.1 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2007.

4.		Instruments Defining the Rights of Securities Holders.

4.1		Articles IV, V and VI of the Company’s Restated Articles of Incorporation are incorporated herein by reference to Exhibit 3.1 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 1998.

4.2		Articles I, II, III, VI, VII, X and XI of the Company’s Amended and Restated Bylaws are incorporated herein by reference to Exhibit 3.1 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2007.

4.3		Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank is incorporated by reference to Exhibit 4.9 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2002.

4.4		Form of certificate representing Rights (included as Exhibit B to the Amendment to Rights Agreement filed as Exhibit 4.6) is incorporated herein by reference to Exhibit 3 of the Company’s Form 8-A/A filed March 20, 2008. Pursuant to the Rights Agreement, Rights Certificates will not be mailed until after the earlier of (i) the tenth business day after the Shares Acquisition Date (or, if such Shares Acquisition Date results from the consummation of a Permitted Offer, such later date as may be determined by the Board of Directors, with the concurrence of a majority of the Continuing Directors), or (ii) the tenth business day (or such later date as may be determined by the Board of Directors, with the concurrence of a majority of the Continuing Directors, prior to such time as any person becomes an Acquiring Person) after the date of the commencement of, or first public announcement of the intent to commence, a tender or exchange offer by any person if, upon consummation thereof, such person would be an Acquiring person, other than as a result of a Permitted Offer.

4.5		Rights Agreement, dated as of March 24, 1998, between Perceptron, Inc. and American Stock Transfer & Trust Company, as Rights Agent, is incorporated herein by reference to Exhibit 2 of the Company’s Report on Form 8-K filed March 24, 1998.

4.6		Amendment to Rights Agreement, dated as of March 17, 2008, between Perceptron, Inc. and American Stock Transfer & Trust Company, as Rights Agent, is incorporated herein by reference to Exhibit 3 of the Company’s Form 8-A/A filed on March 20, 2008.

4.7		First Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank is incorporated by reference to Exhibit 4.6 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2003.

4.8		Second Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank is incorporated by reference to Exhibit 4.7 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2003.

4.9		Third Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank is incorporated by reference to Exhibit 4.8 of the Company’s Report on Form 10-K for the Year Ended June 30, 2004.

4.10		Fourth Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed January 5, 2005.

4.11		Fifth Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank, is incorporated by reference to Exhibit 4.10 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2005.

4.12		Sixth Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank, is incorporated by reference to Exhibit 4.11 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 2006.


Exhibit No.		Description of Exhibits

4.13		Seventh Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank, is incorporated by reference to Exhibit 4.1 of the Company’s Report on Form 8-K filed December 21, 2006.

4.14*		Eighth Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank.

4.15		Ninth Amendment to Credit Agreement dated October 24, 2002, between Perceptron, Inc. and Comerica Bank, is incorporated by reference to Exhibit 10.49 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 2008.

		Other instruments, notes or extracts from agreements defining the rights of holders of long-term debt of the Company or its subsidiaries have not been filed because (i) in each case the total amount of long-term debt permitted thereunder does not exceed 10% of the Company’s consolidated assets, and (ii) the Company hereby agrees that it will furnish such instruments, notes and extracts to the Securities and Exchange Commission upon its request.

10.		Material Contracts.

10.1		Registration Agreement, dated as of June 13, 1985, as amended, among the Company and the Purchasers identified therein, is incorporated by reference to Exhibit 10.3 of the Company’s Form S-1 Registration Statement (amended by Exhibit 10.2) No. 33-47463.

10.2		Patent License Agreement, dated as of August 23, 1990, between the Company and Diffracto Limited, is incorporated herein by reference to Exhibit 10.10 of the Company’s Report on Form S-1 Registration Statement No. 33-47463.

10.3		Form of Proprietary Information and Inventions Agreement between the Company and all of the employees of the Company is incorporated herein by reference to Exhibit 10.11 of the Company’s Form S-1 Registration Statement No. 33-47463.

10.4		Form of Confidentiality and Non-Disclosure Agreement between the Company and certain vendors and customers of the Company is incorporated herein by reference to Exhibit 10.12 of the Company’s Form S-1 Registration Statement No. 33-47463.

10.5		Form of Executive Agreement Not to Compete between the Company and certain officers of the Company is incorporated herein by reference to Exhibit 10.5 of the Company’s Annual Report on Form 10-K for the Year Ended June 30, 2005.

10.6@		Perceptron, Inc. 2004 Stock Incentive Plan is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed December 10, 2004.

10.7@		Form of Incentive Stock Option Agreement Terms for Officers under the Perceptron, Inc. 2004 Stock Incentive Plan is incorporated by reference to Exhibit 10.2 of the Company’s Report on Form 8-K filed January 5, 2005.

10.8@		Form of Nonqualified Stock Option Agreement Terms for Officers under the Perceptron, Inc. 2004 Stock Incentive Plan is incorporated by reference to Exhibit 10.3 of the Company’s Report on Form 8-K filed January 5, 2005.

10.9@		Form of Incentive Stock Option Agreement Terms for Officers under the Perceptron, Inc. 2004 Stock Incentive Plan is incorporated by reference to Exhibit 10.3 of the Company’s Report on Form 8-K filed December 27, 2005.

10.10@		Form of Nonqualified Stock Option Agreement Terms for Officers under the Perceptron, Inc. 2004 Stock Incentive Plan is incorporated by reference to Exhibit 10.2 of the Company’s Report on Form 8-K filed December 27, 2005.

10.11@		Form of Nonqualified Stock Option Agreement Terms — Board of Directors under the Perceptron, Inc. 2004 Stock Incentive Plan is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed August 10, 2006.

10.12@		1998 Global Team Member Stock Option Plan and Form of Non-Qualified Stock Option Agreements under such Plan is incorporated herein by reference to Exhibit 10.20 to the Company’s Annual Report on Form 10-K for the Year Ended December 31, 1997.

10.13@		First Amendment to the 1998 Global Team Member Stock Option Plan is incorporated by reference to Exhibit 10.28 of the Company’s Report on Form 10-K for the Transition Period Ended June 30, 1999.


Exhibit No.		Description of Exhibits

10.14@		Second Amendment to the 1998 Global Team Member Stock Option Plan is incorporated by reference to Exhibit 10.29 of the Company’s Report on Form 10-K for the Transition Period Ended June 30, 1999.

10.15@		Third Amendment to the 1998 Global Team Member Stock Option Plan is incorporated by reference to Exhibit 99.6 of the Company’s Form S-8 Registration Statement No. 333-55164.

10.16@		Fourth Amendment to the 1998 Global Team Member Stock Option Plan is incorporated by reference to Exhibit 99.7 of the Company’s S-8 Registration Statement No. 333-76194.

10.17@		Form of Non-Qualified Stock Option Agreements under 1998 Global Team Member Stock Option Plan after September 1, 1998 is incorporated by reference to Exhibit 10.6 of the Company’s Report on Form 10-K for the Year Ended December 31, 1998.

10.18@		Forms of Non-Qualified Stock Option Agreements under 1998 Global Team Member Stock Option Plan after September 1, 1999 is incorporated by reference to Exhibit 10.31 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 1999.

10.19@		Form of Non-Qualified Stock Option Agreements under 1998 Global Team Member Stock Option Plan after January 1, 2006 is incorporated by reference to Exhibit 10.47 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 2006.

10.20@		Perceptron, Inc. Employee Stock Purchase Plan, as amended and restated as of October 22, 2004, is incorporated by reference to Exhibit 10.2 of the Company’s Report on Form 8-K filed December 10, 2004.

10.21@		Amended and Restated 1992 Stock Option Plan is incorporated herein by reference to Exhibit 10.53 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 1996.

10.22@		First Amendment to Amended and Restated 1992 Stock Plan is incorporated by reference to Exhibit 10.39 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 1997.

10.23@		Second Amendment to Amended and Restated 1992 Stock Option Plan is incorporated by reference to Exhibit 10.26 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 1999.

10.24@		Third Amendment to Amended and Restated 1992 Stock Option Plan is incorporated by reference to Exhibit 10.35 of the Company’s Report on Form 10-K for the Year Ended June 30, 2001.

10.25@		Fourth Amendment to Amended and Restated 1992 Stock Option Plan is incorporated by reference to Exhibit 10.37 of the Company’s Report on Form 10-K for the Year Ended June 30, 2002.

10.26@		Forms of Incentive Stock Option Agreements (Officers) and Non-Qualified Stock Option Agreements (Officers) under 1992 Stock Option Plan after September 1, 1999 is incorporated by reference to Exhibit 10.30 of the Company’s Report on Form 10-Q for the Quarter Ended September 30, 1999.

10.27@		Amended and Restated Directors Stock Option Plan is incorporated by reference to Exhibit 10.56 to the Company’s Report on Form 10-Q for the Quarter Ended September 30, 1996.

10.28@		First Amendment to Amended and Restated Directors Stock Option Plan is incorporated by reference to Exhibit 10.27 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 1999.

10.29@		Second Amendment to the Perceptron, Inc. Directors Stock Option Plan (Amended and Restated October 31, 1996) is incorporated by reference to Exhibit 10.33 of the Company’s Report on Form 10-Q for the Quarter Ended March 31, 2000.

10.30@		Form of Non-Qualified Stock Option Agreements and Amendments under the Director Stock Option Plan is incorporated by reference to Exhibit 10.27 to the Company’s Annual Report on Form 10-K for the Year Ended December 31, 1996.

10.31@		Forms of Non-Qualified Stock Option Agreements under the Directors Stock Option Plan after September 1, 1999 is incorporated by reference to Exhibit 10.32 of the Company’s Report on Form 10-Q for the Quarter Ended December 31, 1999.


Exhibit No.		Description of Exhibits

10.32@		Letter Agreement, dated February 14, 1996, between the Company and Alfred A. Pease is incorporated herein by reference to Exhibit 10.36 to the Company’s Annual Report on Form 10-K for the Year Ended December 31, 1996.

10.33		Covenant Not to Compete between U.S. Natural Resources, Inc., and Perceptron, Inc., dated March 13, 2002 is incorporated by reference to Exhibit 2.1 of the Company’s Report on Form 8-K filed March 29, 2002.

10.34@		Written Description of 2007 Team Member Profit Sharing Plan is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed November 17, 2006.

10.35@		Written Description of 2008 Team Member Profit Sharing Plan is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed August 9, 2007.

10.36@		Severance Agreement, dated September 7, 2005, between the Company and Alfred A. Pease is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed September 12, 2005.

10.37@		Employment and Amended and Restated Severance Agreement, dated January 21, 2008, between the Company and Alfred A. Pease is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed January 22, 2008.

10.38@		Severance Agreement, dated September 7, 2005, between the Company and Harry T. Rittenour is incorporated by reference to Exhibit 10.2 of the Company’s Report on Form 8-K filed September 12, 2005.

10.39@		Severance Agreement, dated September 8, 2005, between the Company and Wilfred J. Corriveau is incorporated by reference to Exhibit 10.3 of the Company’s Report on Form 8-K filed September 12, 2005.

10.40@		First Amendment to Severance Agreement dated October 2, 2007 between the Company and Wilfred J. Corriveau is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed on October 11, 2007.

10.41*@		Severance Agreement, dated September 26, 2005, between the Company and Mark S. Hoefing.

10.42@		Severance Agreement, dated May 18, 2007, between the Company and Paul J. Eckhoff is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed May 23, 2007.

10.43@		Severance Agreement, dated June 12, 2007, between the Company and John H. Lowry III is incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 8-K filed June 25, 2007.

21.*		A list of subsidiaries of the Company.

23.*		Consent of Experts and Counsel.

31.		Rule 13a-14(a)/15d-14(a) Certifications.

31.1*		Certification by the Chief Executive Officer of the Company pursuant to Rule 13a-14(a) and Rule 15d-14(a).

31.2*		Certification by the Chief Financial Officer of the Company pursuant to Rule 13a-14(a) and Rule 15d-14(a).

32.		Section 1350 Certifications.

32.1*		Certification by the Chief Executive Officer of the Company pursuant to Rule 13a-14(a) and Rule 15d-14(a).

32.2*		Certification by the Chief Financial Officer of the Company pursuant to Rule 13a-14(a) and Rule 15d-14(a).


*		Filed with the Company’s Annual Report on Form 10-K for the fiscal year ended June 30, 2008.

@		Indicates a management contract, compensatory plan or arrangement.

Positive
Negative
Uncertain
Constraining
Legalese
Litigous
Readability	H.S. freshman Avg

Perceptron (PRCP) 10-K2008 FY Annual report

Content analysis