North American Palladium Provides Palladium Exploration Update:
Continued Excellent Results
Toronto, Ontario, February 14, 2011 – North American Palladium Ltd. (“NAP”) (TSX: PDL) (NYSE Amex: PAL) today provided an update on the drill results from its 2010 exploration program at the Company’s flagship Lac des Iles (“LDI”) palladium mine in Northern Ontario. These results (see appendix) are the third and final tranche of drill results from the 2010 drill program at LDI.
Highlights:
| · | Continued positive drill results throughout the Offset Zone (including 40 metres at 6.2 g/t Pd) |
| · | Excellent results from definition drilling in the top part of the Offset Zone |
| · | Offset Zone continues to extend higher towards surface |
| · | Deep drilling results confirm Offset Zone continues at depth |
| · | Cowboy Zone intersected again in Offset drilling |
“After completing nearly 80,000 metres of drilling in 2010, we remain very optimistic that LDI has considerable exploration upside with the potential to increase production and extend mine life,” said William J. Biggar, President and CEO. “The exploration results highlight the significant potential to grow our reserve and resource base through exploration.”
NAP’s 2010 exploration program at LDI was aimed at expanding the size of the Offset and Roby zones, increasing the grade of the Offset Zone mineralization to facilitate better mine planning, and exploring other surface areas. In addition to the approximately 55,000 metres of 2010 drilling already reported on (see June 7 and November 17 press releases), a third tranche of drilling in the remainder of the year completed 80 holes totaling 21,670 metres, bringing total drilling for the year to 79,995 metres at an approximate cost of $10 million.
The third tranche of drilling included:
| · | 70 holes from underground for a total of 12,216 metres, of which: |
| o | 63 holes (10,210 metres) targeted the Upper Offset Zone; and |
| o | 7 holes (2,016 metres) were aimed at completing a previous 15-metre drilling pattern and following the Offset Zone’s northern extension. |
| · | 10 holes from surface, including: |
| o | 3 deep holes (2,656 metres) into the southern direction of the Offset Zone (around the 4650 mine elevation and lower); and |
| o | 7 holes (6,788 metres) targeting the south extension of the Offset Zone. |
Complete drill results are included in the appendix of this news release. Elevations referred to in this news release are presented in the mine grid in Figure 1, and the drill locations are presented in Figures 2 – 6.
The Upper Offset Zone
The underground drilling on the Offset Zone in 2010 was designed to define the ore body on a 15-metre drill pattern. This included 63 holes (series 10-700 to 10-808) which completed drilling in the Upper 1A sector of the Offset Zone, where production is scheduled to take place in early 2012. The holes were drilled on fan patterns from the Offset Zone ramp and the vast majority intersected the Offset Zone with grades similar to or higher than the indicated grades from the previous resource estimate for the sector.
Some of the best results include:
Hole | Length of Intersection | Grade (g/t Pd) | Location |
10-703 | 21 metres | 10.9 | Offset Zone |
Including | 7 metres | 21.4 | Offset Zone |
10-705 | 20 metres | 6.7 | Offset Zone |
10-707 | 40 metres | 6.2 | Offset Zone |
Including | 7 metres | 14.4 | Offset Zone |
10-710 | 27 metres | 7.2 | Offset Zone |
10-711 | 29 metres | 7.9 | Offset Zone |
Including | 8 metres | 15.8 | Offset Zone |
Including | 6 metres | 3.4 | Cowboy Zone |
10-713 | 11 metres | 11.2 | Offset Zone |
Including | 16 metres | 2.8 | Cowboy Zone |
10-720 | 22 metres | 6.6 | Offset Zone |
Including | 6 metres | 15.1 | Offset Zone |
10-723 | 35 metres | 6.1 | Offset Zone |
Including | 4 metres | 11.7 | Offset Zone |
10- 725 | 33 metres | 5.1 | Offset Zone |
Including | 12 metres | 10.4 | Offset Zone |
10- 735 | 35 metres | 4.8 | Offset Zone |
Including | 15 metres | 6.6 | Offset Zone |
10-772 | 13 metres | 7.2 | Offset Zone |
Including | 7 metres | 10.1 | Offset Zone |
10-779 | 23 metres | 6.5 | Offset Zone |
Including | 10 metres | 9.8 | Offset Zone |
Including | 3 metres | 6.3 | Cowboy Zone |
10-801 | 10 metres | 8.2 | Offset Zone |
Including | 11 metres | 3.7 | Cowboy Zone |
www.nap.com
The Upper Offset Zone, North Sector
Due to the favourable lengths and grades encountered earlier in 2010 (36 metres at 5.6 g/t Pd), drilling continued on the north extension of the upper part of the Offset Zone. Additional drilling of seven holes returned strong results that indicate the north extension of the Offset Zone still remains open. Some of the best results include:
Hole | Length of Intersection | Grade (g/t Pd) | Location |
10-631 | 28 metres | 6.3 | Offset Zone |
Including | 14 metres | 10.5 | Offset Zone |
Including | 6 meters | 6.0 | Offset/Cowboy Zone |
10-632 | 20 metres | 8.5 | Offset Zone |
Including | 6 metres | 17.6 | Offset Zone |
10-633 | 19 metres | 7.7 | Offset Zone |
Including | 9 metres | 14.3 | Offset Zone |
Surface Drilling of the Offset Zone
The surface directional drills targeted the middle elevations of the mine (4650 level) in the north extension of the Offset Zone (holes 10-507 to 10-509). The following intersections were encountered during the third tranche of drilling:
Hole | Length of Intersection | Grade (g/t Pd) | Location |
10-507 | 10 metres | 4.8 | Offset Zone |
10-508 | 4 metres | 11.0 | Offset Zone |
10-509 | 6 metres | 4.3 | Offset Zone |
In addition, seven other holes were drilled from surface, south of the open pit, of which highlights include:
| · | One deep hole (hole 10-013), aimed at the southern part of the Offset Zone extension, intersected 69 metres at 3.5 g/t Pd at depth, including 13 metres at 5.7 g/t Pd. This confirms the presence of the Offset Zone at elevation 4300, at the limit of the actual resource calculation (see Figure 3 in the appendix for a visual of location). |
| · | The other drill holes intersected the Offset Zone as well as other mineralized areas. Additional drilling will be required to determine whether these new mineralized areas can be correlated to a current known zone. |
These latest results confirm that the Offset Zone remains open towards the south and at depth and that the other zones remain to be followed.
2011 LDI Exploration
Following the exploration success achieved over the past two years, NAP will continue to make significant investments in exploration to expand mineral reserves and resources at LDI and to identify new targets. In 2011, the Company plans to spend $8.8 million on exploration at its palladium properties, comprised of 32,000 metres of drilling, of which 25,000 metres will be at LDI, and 7,000 metres at NAP’s other nearby properties.
A primary focus of the exploration program will be continued underground exploration at LDI targeting the Offset Zone, as well as the three new zones that have not yet been included in the mine’s economics: the Cowboy, Outlaw and Sheriff zones. The program will attempt to better define the upper extension of the Offset Zone for mine planning, as well as testing the extension of the Offset Zone mineralization north, south, down-dip, and up-dip towards surface.
www.nap.com
More specifically, the program is expected to include:
· | Three underground drills on the Offset Zone (10,000 metres of infill drilling); |
· | Five surface drills – two directional drills targeting the north and lower Offset Zone, two targeting the upper Offset Zone extension, and one drill targeting the Sheriff Zone and other zones, as well as the north and south rim (in addition to prospecting, trenching and sampling); and |
· | Drilling and trenching at Legris Lake (3,000 metres), Moose Calf (2,000 metres), and Kukkee (2,000 metres) properties. |
Technical Information and Qualified Persons
The assay analyses performed during NAP’s drill programs are subject to a formal quality assurance and quality control (QA/QC) program. Diamond drill core is logged and sampled on site and at the Company’s exploration office in Thunder Bay with sample transport by the Company and Courtesy Courier to Activation Laboratories Ltd. (Thunder Bay and Ancaster), an independent accredited laboratory, for assay analysis. Check assay analyses are carried out by SGS Minerals Services (Toronto), a laboratory that is also independent of the Company. The Company’s exploration team designed and executed the drilling program under the supervision of Mr. Michel Bouchard, P. Geo., Vice President, Exploration and Development, a Qualified Person as defined by National Instrument 43-101, who has reviewed and approved the content of this news release.
About North American Palladium
NAP is a Canadian precious metals company focused on growing its production of palladium and gold in mining-friendly jurisdictions. The Company’s flagship mine, Lac des Iles, is one of the world’s two primary palladium producers. NAP also owns and operates the Sleeping Giant gold mine located in the prolific Abitibi region of Quebec. The Company has extensive landholdings adjacent to both its Lac des Iles and Sleeping Giant mines, and a number of exploration projects. NAP trades on the NYSE Amex under the symbol PAL and on the TSX under the symbol PDL.
For further information please contact:
Manager, Investor Relations and Corporate Communications
Telephone: 416-360-7590 Ext. 7226
www.nap.com
Cautionary Statement on Forward Looking Information
Certain information included in this press release, including any information as to our future exploration, financial or operating performance and other statements that express management's expectations or estimates of future performance, constitute ‘forward-looking statements’ within the meaning of the ‘safe harbor’ provisions of the United States Private Securities Litigation Reform Act of 1995 and Canadian securities laws. The words ‘expect’, ‘believe’, ‘will’, ‘intend’, ‘estimate’ and similar expressions identify forward-looking statements. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable by management, are inherently subject to significant business, economic and competitive uncertainties, risks and contingencies, including the possibility that drill programs will not yield the expected results, that operations at the Lac des Iles and Sleeping Giant mines may not proceed as planned, that Vezza and other properties can be successfully developed, and that metal prices, foreign exchange assumptions and operating costs may differ from management’s expectations. The Company cautions the reader that such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual financial results, performance or achievements of North American Palladium to be materially different from the Company’s estimated future results, performance or achievements expressed or implied by those forward-looking statements and that the forward-looking statements are not guarantees of future performance. These statements are also based on certain factors and assumptions. For more details on these estimates, risks, assumptions and factors, see the Company’s most recent Form 40-F/Annual Information Form on file with the U.S. Securities and Exchange Commission and Canadian provincial securities regulatory authorities. The Company disclaims any obligation to update or revise any forward-looking statements, whether as a result of new information, events or otherwise, except as expressly required by law. Readers are cautioned not to put undue reliance on these forward-looking statements.
www.nap.com
Appendix:
South Pit Surface Drilling
Drill Hole | From (m) | To (m) | Length (m) | Pd (g/t) | Pt (g/t) | Au (g/t) | Cu (%) | Ni (%) | Co (%) | Location |
10-012 | 593 | 603 | 10 | 2.04 | 0.23 | 0.20 | 0.129 | 0.127 | 0.010 | South |
10-012 | 998 | 1003 | 5 | | | | 0.325 | 0.364 | | South |
10-012 | 1316 | 1327 | 11 | 2.72 | 0.34 | 0.25 | 0.079 | 0.099 | 0.007 | South |
10-012W | Partial Assay | | | | | | | | |
10-012W | NSA | | | | | | | | | |
10-013 | Partial Assay | | | | | | | | |
10-013 | 1330 | 1399 | 69 | 3.53 | 0.24 | 0.14 | 0.063 | 0.078 | 0.006 | Offset |
Including | 1330 | 1334 | 4 | 6.60 | 0.38 | 0.32 | 0.084 | 0.112 | 0.009 | Offset |
Including | 1343 | 1356 | 13 | 5.66 | 0.33 | 0.23 | 0.079 | 0.096 | 0.006 | Offset |
10-014 | Partial Assay | | | | | | | | |
10-015 | Partial Assay | | | | | | | | |
10-015 | 749 | 767 | 18 | 3.10 | 0.36 | 0.36 | | | | Offset |
Including | 756 | 764 | 8 | 4.65 | 0.54 | 0.54 | | | | Offset |
Including | 795 | 813 | 18 | 5.27 | 0.60 | 0.56 | | | | Offset |
Including | 831 | 851 | 20 | 3.62 | 0.41 | 0.38 | 0.116 | 0.116 | 0.007 | Offset |
Including | 831 | 841 | 10 | 5.10 | 0.58 | 0.56 | 0.163 | 0.148 | 0.008 | Offset |
10-016 | NSA | | | | | | | | | PGM Target South |
10-017 | 554 | 560 | 6 | 3.05 | 0.39 | 0.28 | Assays Pending | | South |
10-017 | 599 | 603 | 4 | 3.19 | 0.42 | 0.35 | Assays Pending | | South |
10-017 | 688 | 690 | 2 | 4.63 | 0.51 | 0.46 | Assays Pending | | South |
10-017 | 758 | 764 | 6 | 3.13 | 0.34 | 0.10 | Assays Pending | | South |
NSA: no significant assays
Directional Drilling Offset South
Drill Hole | From (m) | To (m) | Length (m) | Pd (g/t) | Pt (g/t) | Au (g/t) | Cu (%) | Ni (%) | Co (%) | Other |
10-507 | 1234 | 1244 | 10 | 4.77 | 0.32 | 0.26 | 0.067 | 0.088 | 0.007 | Offset |
10-508 | 479 | 483 | 4 | 10.98 | 0.76 | 0.05 | 0.015 | 0.058 | 0.006 | Offset |
10-509 | 522 | 528 | 6 | 4.27 | 0.29 | 0.19 | Assays Pending | Offset |
Offset Phase 1A North
Drill Hole | From (m) | To (m) | Length (m) | Pd (g/t) | Pt (g/t) | Au (g/t) | Cu (%) | Ni (%) | Co (%) | Other |
10-627 | 171 | 182 | 11 | 5.02 | 0.31 | 0.23 | 0.069 | 0.088 | 0.006 | Offset |
10-628 | 134 | 170 | 36 | 3.31 | 0.23 | 0.24 | 0.061 | 0.097 | 0.006 | Offset |
10-629 | 135 | 146 | 11 | 7.83 | 0.51 | 0.23 | 0.065 | 0.109 | 0.008 | Offset |
Including | 141 | 145 | 4 | 11.79 | 0.79 | 0.17 | 0.066 | 0.153 | 0.009 | Offset |
10-630 | 166 | 176 | 10 | 4.18 | 0.26 | 0.16 | 0.031 | 0.083 | 0.005 | Offset |
10-631 | 158 | 186 | 28 | 6.30 | 0.40 | 0.30 | 0.060 | 0.102 | 0.008 | Offset |
Including | 169 | 183 | 14 | 10.47 | 0.60 | 0.44 | 0.064 | 0.117 | 0.007 | Offset |
Including | 207 | 213 | 6 | 6.06 | 0.28 | 0.22 | 0.066 | 0.102 | 0.008 | Cowboy |
10-632 | 166 | 186 | 20 | 8.46 | 0.45 | 0.43 | 0.084 | 0.114 | 0.008 | Offset |
Including | 176 | 182 | 6 | 17.62 | 0.79 | 0.58 | 0.081 | 0.124 | 0.008 | Offset |
10-633 | 177 | 196 | 19 | 7.66 | 0.41 | 0.43 | 0.063 | 0.099 | 0.008 | Offset |
Including | 186 | 195 | 9 | 14.32 | 0.69 | 0.67 | 0.076 | 0.123 | 0.008 | Offset |
Offset Phase 1A Upper Offset Zone
Drill Hole | From (m) | To (m) | Length (m) | Pd (g/t) | Pt (g/t) | Au (g/t) | Cu (%) | Ni (%) | Co (%) | Location |
10-700 | NSA | | | | | | | | |
10-701 | 114 | 141 | 27 | 4.64 | 0.31 | 0.29 | 0.116 | 0.162 | 0.007 | Offset |
Including | 216 | 223 | 7 | 2.87 | 0.26 | 0.41 | 0.176 | 0.185 | 0.009 | Offset |
10-702 | 129 | 151 | 22 | 2.83 | 0.26 | 0.24 | 0.129 | 0.150 | 0.007 | Offset |
10-703 | 114 | 135 | 21 | 10.94 | 0.63 | 0.52 | 0.113 | 0.154 | 0.010 | Offset |
Including | 126 | 133 | 7 | 21.44 | 1.06 | 0.87 | 0.142 | 0.211 | 0.010 | Offset |
10-704 | 96 | 133 | 37 | 5.26 | 0.34 | 0.38 | 0.090 | 0.136 | 0.006 | Offset |
Including | 113 | 116 | 3 | 12.47 | 0.87 | 0.85 | 0.204 | 0.275 | 0.009 | Offset |
Including | 124 | 133 | 9 | 4.06 | 0.25 | 0.39 | 0.064 | 0.104 | 0.006 | Cowboy |
10-705 | 96 | 116 | 20 | 6.65 | 0.37 | 0.33 | 0.062 | 0.094 | 0.006 | Offset |
Including | 96 | 110 | 14 | 8.52 | 0.45 | 0.40 | 0.073 | 0.107 | 0.007 | Offset |
Including | 129 | 135 | 6 | 2.52 | 0.33 | 0.20 | 0.156 | 0.138 | 0.006 | Offset |
10-706 | 112 | 140 | 28 | 3.78 | 0.27 | 0.24 | 0.063 | 0.090 | 0.005 | Offset |
Including | 116 | 119 | 3 | 15.17 | 1.05 | 1.19 | 0.248 | 0.242 | 0.008 | Offset |
10-707 | 122 | 162 | 40 | 6.24 | 0.37 | 0.41 | 0.074 | 0.126 | 0.006 | Offset |
Including | 123 | 130 | 7 | 14.43 | 0.82 | 0.69 | 0.097 | 0.186 | 0.008 | Offset |
10-708 | 132 | 145 | 13 | 6.06 | 0.37 | 0.38 | 0.014 | 0.025 | 0.003 | Offset |
Including | 132 | 137 | 5 | 8.78 | 0.48 | 0.34 | 0.014 | 0.027 | 0.004 | Offset |
Including | 141 | 144 | 3 | 7.27 | 0.46 | 0.93 | 0.016 | 0.028 | 0.003 | Offset |
10-709 | 42 | 55 | 13 | 12.91 | 0.64 | 0.99 | 0.173 | 0.237 | 0.008 | Offset |
Including | 45 | 50 | 5 | 21.24 | 1.03 | 1.48 | 0.212 | 0.324 | 0.010 | Offset |
10-710 | 54 | 81 | 27 | 7.18 | 0.44 | 0.53 | 0.126 | 0.173 | 0.008 | Offset |
10-711 | 91 | 122 | 29 | 7.90 | 0.46 | 0.54 | 0.128 | 0.169 | 0.008 | Offset |
Including | 95 | 103 | 8 | 15.85 | 0.77 | 0.61 | 0.122 | 0.176 | 0.009 | Offset |
Including | 114 | 120 | 6 | 3.42 | 0.27 | 0.52 | 0.176 | 0.175 | 0.008 | Cowboy |
10-713 | 49 | 60 | 11 | 11.22 | 0.66 | 0.67 | 0.108 | 0.190 | 0.008 | Offset |
Including | 85 | 101 | 16 | 2.79 | 0.22 | 0.15 | 0.076 | 0.083 | 0.006 | Cowboy |
10-714 | 74 | 88 | 14 | 8.12 | 0.53 | 0.60 | 0.086 | 0.127 | 0.007 | Offset |
Including | 123 | 126 | 3 | 4.17 | 0.35 | 0.68 | 0.274 | 0.264 | 0.009 | Cowboy |
10-715 | 96 | 133 | 37 | 4.31 | 0.25 | 0.15 | 0.039 | 0.097 | 0.006 | Offset |
Including | 97 | 107 | 10 | 12.04 | 0.60 | 0.39 | 0.063 | 0.145 | 0.008 | Offset |
10-716 | 99 | 115 | 16 | 6.08 | 0.38 | 0.33 | 0.104 | 0.137 | 0.007 | Offset |
Including | 103 | 109 | 6 | 11.52 | 0.62 | 0.49 | 0.138 | 0.186 | 0.007 | Offset |
10-719 | 93 | 113 | 20 | 5.52 | 0.32 | 0.34 | 0.132 | 0.157 | 0.008 | Offset |
Including | 98 | 105 | 7 | 10.04 | 0.45 | 0.34 | 0.095 | 0.149 | 0.009 | Offset |
10-719 | 136 | 140 | 4 | 3.84 | 0.34 | 0.16 | 0.063 | 0.088 | 0.005 | Cowboy |
10-720 | Partial Assay | | | | | | | | |
www.nap.com
10-720 | 94 | 116 | 22 | 6.64 | 0.38 | 0.56 | 0.169 | 0.207 | 0.009 | Offset |
Including | 99 | 105 | 6 | 15.07 | 0.64 | 0.47 | 0.097 | 0.145 | 0.009 | Offset |
10-720 | 164 | 169 | 5 | 6.27 | 0.47 | 0.45 | | | | Cowboy |
10-723 | 64 | 99 | 35 | 6.10 | 0.42 | 0.38 | 0.095 | 0.127 | 0.007 | Offset |
Including | 67 | 71 | 4 | 7.18 | 0.41 | 0.40 | 0.075 | 0.121 | 0.009 | Offset |
Including | 79 | 83 | 4 | 11.69 | 0.71 | 0.83 | 0.166 | 0.174 | 0.005 | Offset |
Including | 90 | 94 | 4 | 10.73 | 0.68 | 0.53 | 0.146 | 0.217 | 0.008 | Offset |
10-724 | 70 | 100 | 30 | 5.04 | 0.34 | 0.32 | 0.101 | 0.123 | 0.006 | Offset |
Including | 80 | 83 | 3 | 9.20 | 0.67 | 0.30 | 0.118 | 0.161 | 0.005 | Offset |
Including | 91 | 99 | 8 | 8.29 | 0.51 | 0.56 | 0.132 | 0.189 | 0.008 | Cowboy |
10-725 | 100 | 133 | 33 | 5.09 | 0.29 | 0.25 | 0.067 | 0.113 | 0.006 | Offset |
Including | 103 | 115 | 12 | 10.39 | 0.53 | 0.42 | 0.103 | 0.174 | 0.008 | Offset |
10-728 | Partial Assay | | | | | | | | |
10-728 | 111 | 163 | 52 | 4.18 | 0.22 | 0.13 | | | | Offset |
10-728 | 115 | 121 | 6 | 12.27 | 0.64 | 0.36 | | | | Offset |
10-728 | 141 | 150 | 9 | 7.68 | 0.31 | 0.16 | | | | Cowboy |
10-729 | Partial Assay | | | | | | | | |
10-729 | 117 | 162 | 45 | 4.06 | 0.26 | 0.19 | | | | Offset |
Including | 118 | 123 | 5 | 6.34 | 0.44 | 0.30 | | | | Offset |
Including | 150 | 157 | 7 | 10.88 | 0.54 | 0.28 | | | | Cowboy |
10-730 | NSA | | | | | | | | Missed zone |
10-732 | 105 | 123 | 18 | 3.58 | 0.41 | 0.32 | 0.107 | 0.113 | 0.007 | Offset |
Including | 111 | 115 | 4 | 5.72 | 0.62 | 0.57 | 0.157 | 0.175 | 0.008 | Offset |
10-733 | 70 | 76 | 6 | 4.33 | 0.28 | 0.19 | 0.107 | 0.127 | 0.009 | Offset |
10-733 | 94 | 98 | 4 | 5.52 | 0.43 | 0.86 | 0.233 | 0.288 | 0.010 | Cowboy |
10-733 | 110 | 114 | 4 | 4.22 | 0.33 | 0.24 | 0.151 | 0.133 | 0.007 | Cowboy |
10-734 | 119 | 204 | 85 | 3.63 | 0.27 | 0.14 | 0.048 | 0.098 | 0.005 | Offset |
10-734 | 119 | 127 | 8 | 6.65 | 0.42 | 0.27 | 0.072 | 0.162 | 0.007 | Offset |
10-734 | 189 | 193 | 4 | 12.04 | 0.64 | 0.17 | 0.033 | 0.095 | 0.005 | Offset |
10-735 | 103 | 138 | 35 | 4.81 | 0.31 | 0.35 | 0.103 | 0.134 | 0.008 | Offset |
Including | 104 | 119 | 15 | 6.58 | 0.45 | 0.56 | 0.142 | 0.160 | 0.011 | Offset |
10-739 | 61 | 64 | 3 | 7.59 | 0.43 | 0.42 | 0.064 | 0.071 | 0.007 | Offset |
Including | 79 | 94 | 15 | 2.96 | 0.29 | 0.25 | 0.066 | 0.091 | 0.007 | Offset |
10-740 | 11 | 21 | 10 | 2.30 | 0.33 | 0.26 | 0.290 | 0.271 | 0.023 | Other |
Including | 67 | 94 | 27 | 3.10 | 0.32 | 0.30 | 0.082 | 0.117 | 0.008 | Offset |
Including | 80 | 91 | 11 | 3.84 | 0.42 | 0.38 | 0.095 | 0.150 | 0.010 | Offset |
10-741 | NSA | | | | | | | | |
10-742 | 80 | 88 | 8 | 3.35 | 0.32 | 0.35 | 0.049 | 0.094 | 0.006 | Offset |
10-743 | 65 | 69 | 4 | 3.94 | 0.38 | 0.41 | 0.129 | 0.132 | 0.009 | Other |
10-743 | 92 | 102 | 10 | 3.97 | 0.44 | 0.26 | 0.091 | 0.112 | 0.007 | Offset |
Including | 93 | 96 | 3 | 6.40 | 0.69 | 0.34 | 0.103 | 0.123 | 0.008 | Offset |
10-743 | 114 | 117 | 3 | 3.70 | 0.40 | 0.26 | 0.112 | 0.118 | 0.008 | Cowboy |
10-744 | 16 | 21 | 5 | 3.66 | 0.57 | 0.32 | 0.805 | 0.320 | 0.016 | Other |
10-744 | 72 | 88 | 16 | 3.97 | 0.30 | 0.33 | 0.074 | 0.100 | 0.007 | Offset |
Including | 80 | 85 | 5 | 5.77 | 0.47 | 0.51 | 0.116 | 0.142 | 0.008 | Offset |
10-745 | NSA | | | | | | | | |
10-746 | 71 | 74 | 3 | 4.21 | 0.32 | 0.19 | 0.049 | 0.092 | 0.007 | Offset |
10-747 | 57 | 75 | 18 | 4.00 | 0.27 | 0.18 | 0.054 | 0.093 | 0.007 | Offset |
Including | 68 | 74 | 6 | 5.21 | 0.31 | 0.18 | 0.063 | 0.104 | 0.007 | Offset |
www.nap.com
10-747 | 95 | 97 | 2 | 6.92 | 0.43 | 0.09 | 0.014 | 0.051 | 0.004 | Cowboy |
10-748 | 51 | 55 | 4 | 6.63 | 0.45 | 0.31 | 0.053 | 0.078 | 0.007 | Offset |
10-748 | 77 | 120 | 43 | 3.57 | 0.36 | 0.18 | 0.066 | 0.086 | 0.006 | Offset |
Including | 77 | 81 | 4 | 7.23 | 0.40 | 0.25 | 0.070 | 0.098 | 0.006 | Offset |
Including | 93 | 96 | 3 | 5.55 | 0.68 | 0.35 | 0.127 | 0.131 | 0.007 | Cowboy |
Including | 112 | 120 | 8 | 5.58 | 0.58 | 0.10 | 0.041 | 0.087 | 0.005 | Cowboy |
10-749 | 106 | 109 | 3 | 4.57 | 0.50 | 0.15 | 0.025 | 0.067 | 0.005 | Offset |
10-749 | 117 | 121 | 4 | 3.29 | 0.37 | 0.16 | 0.055 | 0.096 | 0.006 | Offset |
10-750 | 51 | 57 | 6 | 3.57 | 0.29 | 0.22 | | | | Offset |
10-750 | 103 | 112 | 9 | 4.23 | 0.48 | 0.32 | | | | Offset |
10-751 | NSA | | | | | | | | |
10-752 | NSA | | | | | | | | |
10-753 | 135 | 146 | 11 | 3.68 | 0.44 | 0.30 | 0.086 | 0.099 | 0.006 | Offset |
10-754 | NSA | | | | | | | | |
10-755 | Partial Assay | | | | | | | | |
10-757 | 62 | 76 | 14 | 3.51 | 0.24 | 0.13 | 0.035 | 0.063 | 0.006 | Offset |
10-763 | 115 | 118 | 3 | 3.00 | 0.33 | 0.06 | 0.027 | 0.086 | 0.005 | Offset |
10-763 | 127 | 129 | 2 | 4.26 | 0.50 | 0.37 | 0.129 | 0.142 | 0.009 | Offset |
10-764 | 45 | 59 | 14 | 3.44 | 0.24 | 0.11 | 0.072 | 0.080 | 0.007 | Offset |
Including | 52 | 58 | 6 | 5.32 | 0.31 | 0.12 | 0.052 | 0.080 | 0.007 | Offset |
10-765 | 118 | 122 | 4 | 6.27 | 0.58 | 0.46 | 0.148 | 0.158 | 0.007 | Offset |
10-770 | Partial Assay | | | | | | | | |
10-770 | 34 | 54 | 20 | 2.99 | 0.21 | 0.09 | 0.054 | 0.064 | 0.007 | Offset |
Including | 48 | 54 | 6 | 7.21 | 0.41 | 0.13 | 0.044 | 0.074 | 0.007 | Offset |
10-771 | 114 | 117 | 3 | 5.93 | 0.70 | 0.32 | 0.180 | 0.133 | 0.008 | Offset Called Short |
10-772 | 44 | 57 | 13 | 7.22 | 0.47 | 0.19 | 0.088 | 0.124 | 0.009 | Offset |
Including | 48 | 55 | 7 | 10.09 | 0.56 | 0.18 | 0.055 | 0.117 | 0.008 | Offset |
10-772 | 76 | 81 | 5 | 4.50 | 0.28 | 0.17 | 0.052 | 0.097 | 0.007 | Cowboy |
10-772 | 112 | 114 | 2 | 4.87 | 0.32 | 0.18 | 0.048 | 0.070 | 0.006 | Cowboy |
10-779 | 46 | 69 | 23 | 6.53 | 0.44 | 0.41 | 0.081 | 0.126 | 0.007 | Offset |
Including | 49 | 59 | 10 | 9.78 | 0.65 | 0.64 | 0.096 | 0.154 | 0.007 | Offset |
Including | 84 | 87 | 3 | 6.32 | 0.45 | 0.13 | 0.014 | 0.063 | 0.004 | Cowboy |
10-780 | 45 | 66 | 21 | 4.54 | 0.27 | 0.10 | 0.073 | 0.108 | 0.006 | Offset |
Including | 45 | 49 | 4 | 10.48 | 0.56 | 0.09 | 0.076 | 0.134 | 0.008 | Offset |
10-800 | Partial Assay | | | | | | | | |
10-800 | 112 | 132 | 20 | 3.73 | 0.30 | 0.27 | | | | Offset |
Including | 112 | 115 | 3 | 4.47 | 0.33 | 0.18 | | | | Offset |
Including | 123 | 132 | 9 | 5.92 | 0.49 | 0.53 | | | | Offset |
Including | 126 | 129 | 3 | 10.98 | 0.89 | 1.24 | | | | Offset |
10-801 | 109 | 119 | 10 | 8.22 | 0.58 | 0.47 | 0.087 | 0.135 | 0.006 | Offset |
10-801 | 139 | 150 | 11 | 3.71 | 0.25 | 0.10 | 0.024 | 0.062 | 0.004 | Cowboy Called Short |
10-802 | 85 | 89 | 4 | 4.10 | 0.30 | 0.53 | 0.180 | 0.174 | 0.009 | Offset |
10-802 | 117 | 120 | 3 | 4.21 | 0.36 | 0.30 | 0.098 | 0.140 | 0.007 | Cowboy |
10-803 | Partial Assay | | | | | | | | |
10-803 | 83 | 88 | 5 | 3.76 | 0.40 | 0.12 | | | | other |
10-803 | 106 | 108 | 2 | 3.73 | 0.44 | 0.84 | | | | Offset |
10-803 | 112 | 117 | 5 | 2.93 | 0.28 | 0.09 | | | | Offset |
www.nap.com
10-804 | 66 | 79 | 13 | 3.44 | 0.26 | 0.39 | 0.151 | 0.164 | 0.007 | Offset |
Including | 66 | 70 | 4 | 5.24 | 0.40 | 0.43 | 0.200 | 0.230 | 0.008 | Offset |
10-805 | Partial Assay | | | | | | | | |
10-806 | 130 | 135 | 5 | 3.53 | 0.24 | 0.24 | 0.180 | 0.185 | 0.008 | Offset |
10-807 | 128 | 139 | 11 | 4.53 | 0.33 | 0.35 | 0.174 | 0.189 | 0.007 | Offset |
Including | 131 | 134 | 3 | 6.35 | 0.42 | 0.54 | 0.256 | 0.244 | 0.009 | Offset |
10-808 | Partial Assay | | | | | | | | |
10-808 | 130 | 160 | 30 | 3.92 | 0.27 | 0.38 | | | | Offset |
Including | 131 | 137 | 6 | 7.15 | 0.53 | 0.96 | | | | Offset |
Including | 146 | 149 | 3 | 6.81 | 0.46 | 0.23 | | | | Offset |
Including | 154 | 157 | 3 | 4.99 | 0.34 | 0.41 | | | | Offset |
NSA: no significant assays
Figure 1: LDI Mine Elevations
www.nap.com
Figure 2: Upper Offset Zone 2010 Drilling
www.nap.com
Figure 3: Southern Deep Offset Zone, 2010 Drilling
Figure 4: North Drill Results Cross-Section, Offset Zone
www.nap.com
Figure 5: South Drill Results Cross-Section, Offset Zone
Figure 6: Central 2010 Drill Results Cross-Section, Offset Zone
www.nap.com