Exhibit 99.2 Meta Materials Inc. New Nanomaterials to Enable Cleaner, Safer Transportation NASDAQ: MMAT June 2022 1 © 2022 Meta Materials Inc. All rights reserved.
Forward Looking Statements This presentation includes forward-looking information or statements within the production costs, enhance metamaterials manufacturing capabilities and extend meaning of Canadian securities laws and within the meaning of Section 27A of the market reach into new applications and industries, the ability to accelerate Securities Act of 1933, as amended, Section 21E of the Securities Exchange Act of commercialization plans, the possibility of new customer contracts, the continued 1934, as amended, and the Private Securities Litigation Reform Act of 1995, engagement of our employees, the technology industry, market strategic and regarding the Company, which may include, but are not limited to, statements with operational activities, and management’s ability to manage and to operate the respect to the business strategies, product development, expansion plans and business. More details about these and other risks that may impact the Company’s operational activities of the Company . Often but not always, forward-looking businesses are described under the heading “Forward-Looking Information” and information can be identified by the use of words such as “pursuing”, “potential”, under the heading “Risk Factors” in the Company’s Form 10-K filed with the SEC on “predicts”, “projects”, “seeks”, “plans”, “expect”, “intends”, “anticipated”, “believes” or March 2, 2022, in the Company’s Form 10-Q filed with the SEC on May 10, 2022, variations (including negative variations) of such words and phrases, or statements and in subsequent filings made by META with the SEC, which are available on that certain actions, events or results “may”, “could”, “should”, “would” or “will” be SEC’s website at www.sec.gov. Although the Company has attempted to identify taken, occur or be achieved. Such statements are based on the current expectations important factors that could cause actual actions, events or results to differ materially and views of future events of the management of the Company and are based on from those described in forward-looking statements, there may be other factors that assumptions and subject to risks and uncertainties. Although the management of the cause actions, events or results to differ from those anticipated, estimated or Company believes that the assumptions underlying these statements are reasonable, intended. Accordingly, readers should not place undue reliance on any forward- they may prove to be incorrect. The forward-looking events and circumstances looking statements or information. No forward-looking statement can be guaranteed. discussed in this release may not occur and could differ materially as a result of Except as required by applicable securities laws, forward-looking statements speak known and unknown risk factors and uncertainties affecting the Company, the only as of the date on which they are made and the Company does not undertake capabilities of our facilities and the expansion thereof, research and development any obligation to publicly update or revise any forward-looking statement, whether as projects of the Company, the market potential of the products of the Company, the a result of new information, future events, or otherwise, except to the extent required market position of the Company, the need to raise more capital and the ability to do by law. Unless otherwise stated, all references to $ herein are to US dollars. so, the scalability of the Company’s production ability, capacity for new customer engagements, material selection programs timeframes, the ability to reduce 2 © 2022 Meta Materials Inc. All rights reserved.
Enhancing Performance and Safety for Electric Vehicles EV Consumers Desire: Increased Range, Fast Charging Higher Energy Density and Charge Rates Demand: Improved Material Performance, Stability and Safety Wider EV Adoption Requires: Better Material Utilization and Cost Reduction META is developing new battery materials and manufacturing techniques to address these challenges. PLASMAfusion™ used to make thin coated copper current collectors, reducing weight by 80% and inhibiting thermal runaway. ® NPORE nano-ceramic battery separators feature <1% heat shrinkage for increased safety and offer superior electrochemical performance. 3 © 2022 Meta Materials Inc. All rights reserved.
Coated Copper Current Collectors: Reduced Weight, Enhanced Safety Copper foil is over 10% of the weight of a typical battery cell Aluminum (Al) and Copper (Cu) foils used for cathode/anode, respectively, account for ~15% of battery mass. Cu is more than 3x heavier than Al, accounts for >10% of weight. Plastic substrate acts as a fuse to impede thermal runaway A PET/PEN plastic substrate coated with 150nm of Cu on each side promises the same functionality and cost as copper foil, while providing several benefits: • Weight is reduced by ~80%, increasing energy and power density. • In case of thermal runaway, the plastic melts, improving safety by retarding battery self-ignition. • Lower copper content reduces the energy input to produce the battery and enhances recycling. 4 © 2022 Meta Materials Inc. All rights reserved.
Battery Separators: Essential for Safety and Stability A porous membrane placed between the electrodes. Prevents contact between the anode and cathode while facilitating the transport of lithium ions. Safe battery separators must optimize porosity and ion transport, reduce the weight and thickness of inactive materials, while maintaining thermal/mechanical stability. First generation separators are typically made by coating a plastic substrate on one or both sides with ceramic material. ® Second Generation NPORE nano-ceramic separators eliminate the use of plastic substrate and provide best in class dimensional stability with <1% heat shrinkage. • Global market $5.1B in 2001, $9.0B in 2025 (Yano Research) 2 2 • Shipments 5.5B m in 2021, 15.9B m in 2025 (SNE Research) 2 • About 15 million m per GWh of battery capacity (range 10-20) Sources: Yano Research Institute Ltd., SNE Research 5 © 2022 Meta Materials Inc. All rights reserved.
® NPORE All-Ceramic Separators <1% heat shrinkage for increased battery safety World’s first flexible, free-standing ceramic nanoporous membrane separator for lithium-ion batteries. ® NPORE features include: Thermal Stability • Best in class dimensional stability • 5x higher thermal conductivity vs. plastic separators ® NPORE separator prevents thermal runaway • Flame resistant in nail penetration test Electrochemical Performance • Superior abuse resistance • Rapid wet out with battery electrolytes • 3x greater compression resistance vs. plastic separators • Excellent electrolyte conductivity Click here to see the video • Uniform and narrow pore size distribution 6 © 2022 Meta Materials Inc. All rights reserved.
® Electrode Coated Separator (NPORE ECS) A Simpler and Faster Battery Assembly Process Electrode Coated Separator technology, developed with funding by the DOE, aims to reduce the cost of manufacturing lithium-ion batteries and the inactive components cost by 20-40%, while improving battery safety, lifetime, and energy and power density. ® NPORE ECS incorporates new inactive components of separator, current collectors, and termination materials, and utilizes a simpler and faster battery assembly process. Electrodes are directly deposited onto the separator to form a separator/electrode stack. • The 8-micron thick ceramic separator reduces inactive component cost >20% and improves safety and cycle life • Developing new processes for metal current collection layers and for tabbing and termination 7 © 2022 Meta Materials Inc. All rights reserved.
Optodot Asset & IP Acquisition A leading developer and licensor of nano-composite battery separators and infrared optical coating technologies Extensive IP Portfolio: 67 issued and 22 pending patents Benefits: R&D team with decades of experience in nanomaterials for batteries and IR coatings. Collaborations with leading OEMs, innovative start-ups, and U.S. government agencies. SBIR Phase II project led by Imperia Batteries (division of Physical Sciences Inc.) PLASMAfusion™ lab-scale tool Synergies: Products can be combined and coated with PLASMAfusion™ technology, capacity expansion in Thurso, QC. ® NANOPORE membrane technology for ultrafiltration, medical metamaterial devices. Security marking for brand protection. • Expected to close in June 2022, $45MM stock, $3.5MM cash • R&D office in Devens, Massachusetts 8 © 2022 Meta Materials Inc. All rights reserved.
Mark Komonoski Senior Vice President Integrous Communications T: 877-255-8483 E: ir@metamaterial.com 9 © 2022 Meta Materials Inc. All rights reserved.