Based on the current stage of field development, production performance, the development plans provided by Antero, and the analyses of areas offsetting existing wells with test or production data, reserves were classified as proved. The proved undeveloped reserves were based on opportunities identified in the plan of development provided by Antero.
Antero has represented that its senior management is committed to the development plan provided by Antero and that Antero has the financial capability to execute the development plan, including the drilling and completion of wells and the installation of equipment and facilities.
For the evaluation of unconventional reservoirs, a performance-based methodology integrating the appropriate geology and petroleum engineering data was utilized for this report. Performance-based methodology primarily includes (1) production diagnostics, (2) decline-curve analysis, and (3) model-based analysis (if necessary, based on availability of data). Production diagnostics include data quality control, identification of flow regimes, and characteristic well performance behavior. These analyses were performed for all well groupings (or type-curve areas).
Characteristic rate-decline profiles from diagnostic interpretation were translated to modified hyperbolic rate profiles, including one or multiple b-exponent values followed by an exponential decline. Based on the availability of data, model-based analysis may be integrated to evaluate long-term decline behavior, the effect of dynamic reservoir and fracture parameters on well performance, and complex situations sourced by the nature of unconventional reservoirs.
In the evaluation of undeveloped reserves, type-well analysis was performed using well data from analogous reservoirs for which more complete historical performance data were available.
Data provided by Antero from wells drilled through December 31, 2022, and made available for this evaluation were used to prepare the reserves estimates herein. These reserves estimates were based on consideration of daily and monthly production data available through December 2022. Cumulative production, as of December 31, 2022, was deducted from the estimated gross ultimate recovery to estimate gross reserves.
Oil and condensate reserves estimated herein are those to be recovered by normal field separation. NGL reserves estimated herein include pentanes and heavier fractions (C5+) and liquefied petroleum gas (LPG), which consists primarily of propane and butane fractions, and are the result of low-temperature plant processing. Oil, condensate, and NGL reserves included in this report are expressed in thousands of barrels (Mbbl). In these estimates, 1 barrel equals 42 United States gallons. For reporting purposes, oil and condensate reserves have been estimated separately and are presented herein as a summed quantity.
Gas quantities estimated herein are expressed as sales gas. Sales gas is defined as the total gas to be produced from the reservoirs, measured at the point of delivery, after reduction for fuel usage, flare, and shrinkage resulting from field separation and processing. Gas reserves estimated herein are reported as sales gas. Gas quantities are expressed at a temperature base of 60 degrees Fahrenheit (°F) and at the pressure base of the state in which the quantities are located. Gas quantities included in this report are expressed in millions of cubic feet (MMcf).
Gas quantities are identified by the type of reservoir from which the gas will be produced. Nonassociated gas is gas at initial reservoir conditions with no oil present in the reservoir. Associated gas is both gas-cap gas and solution gas. Gas-cap gas is gas at initial reservoir conditions and is in communication with an underlying oil zone. Solution gas is gas dissolved in oil at initial reservoir conditions. Gas quantities estimated herein include both associated and nonassociated gas.
At the request of Antero, liquid reserves estimated herein were converted to gas equivalent using an energy equivalent factor of 1 barrel of liquids per 6,000 cubic feet of gas equivalent.